mibs/MIBS/ubiquoss/UBQS-ERPS-MIB

805 lines
24 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- UBQS-ERPS-MIB: Ubiquoss ERPS MIB
--
-- Nov 2010, Park Hyung Eun
--
-- Copyright (c) 2010 by Ubiquoss, Corp.
-- All rights reserved.
-- *****************************************************************
--
UBQS-ERPS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Counter32,
IpAddress,
Gauge32,
Integer32,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
RowStatus,
DisplayString,
TruthValue,
FROM SNMPv2-TC
ifIndex,
FROM IF-MIB
VlanIndex,
FROM Q-BRIDGE-MIB
ubiSysMacAddr,
FROM UBQS-SYSTEM-MIB
Dot1agCfmMaintDomainName,
Dot1agCfmMaintAssocName,
FROM UBQS-CFM-MIB
UbiBridgeId,
FROM UBQS-TC
ubiMgmtv2
FROM UBQS-SMI;
ubiErpsMIB MODULE-IDENTITY
LAST-UPDATED "201011290000Z"
ORGANIZATION "Ubiquoss Corp."
CONTACT-INFO
" Ubiquoss
Customer Service
Postal: 24F Milennium B/D,
467-12, Dogok-Dong,
GangNam-Gu, Seoul 135-270
Korea
Tel: 82-2-2190-3100"
DESCRIPTION
""
::= { ubiMgmtv2 11 }
-- *****************************************************************
-- Textual Conventions
-- *****************************************************************
-- *****************************************************************
-- ubiERPSMIB
-- *****************************************************************
ubiErpsMIBNotificationPrefix OBJECT IDENTIFIER ::= { ubiErpsMIB 0 }
ubiErpsMIBObjects OBJECT IDENTIFIER ::= { ubiErpsMIB 1 }
ubiErpsMIBConformance OBJECT IDENTIFIER ::= { ubiErpsMIB 2 }
ubiErpsGlobal OBJECT IDENTIFIER ::= { ubiErpsMIBObjects 4 }
ubiErpsNotificationEnables OBJECT IDENTIFIER ::= { ubiErpsMIBObjects 5 }
-- *****************************************************************
-- ubiCfmNotifications
-- *****************************************************************
ubiErpsMIBNotifications OBJECT IDENTIFIER ::= { ubiErpsMIBNotificationPrefix 0 }
ubiErpsRingStateChange NOTIFICATION-TYPE
OBJECTS {
ubiSysMacAddr,
ubiErpsSwitchBridgeId,
ubiErpsSwitchRingId,
ubiErpsSwitchCurrentState,
ubiErpsSwitchEastIf,
ubiErpsSwitchEastIfState,
ubiErpsSwitchWestIf,
ubiErpsSwitchWestIfState,
}
STATUS current
DESCRIPTION
"Notification of ERPS State Change."
::= { ubiErpsMIBNotifications 1 }
ubiErpsRingEastIfStateChange NOTIFICATION-TYPE
OBJECTS {
ubiSysMacAddr,
ubiErpsSwitchBridgeId,
ubiErpsSwitchRingId,
ubiErpsSwitchEastIf,
ubiErpsSwitchEastIfState
}
STATUS current
DESCRIPTION
"Notification of East Ring Port State Change."
::= { ubiErpsMIBNotifications 2 }
ubiErpsRingWestIfStateChange NOTIFICATION-TYPE
OBJECTS {
ubiSystemMacAddr,
ubiErpsSwitchBridgeId,
ubiErpsSwitchRingId,
ubiErpsSwitchWestIf,
ubiErpsSwitchWestIfState
}
STATUS current
DESCRIPTION
"Notification of West Ring Port State Change."
::= { ubiErpsMIBNotifications 3 }
-- *****************************************************************
-- ubiErpsBaseTable
-- *****************************************************************
ubiErpsBaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiErpsBaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of ERPS Base information."
::= { ubiErpsMIBObjects 1 }
ubiErpsBaseEntry OBJECT-TYPE
SYNTAX UbiErpsBaseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of ERPS Base information."
INDEX { ubiErpsBaseBridgeId, ubiErpsBaseRingId,
ubiErpsBaseEastIf, ubiErpsBaseWestIf,
ubiErpsBaseInstId }
::= { ubiErpsBaseTable 1 }
UbiErpsBaseEntry ::= SEQUENCE {
ubiErpsBaseBridgeId UbiBridgeId,
ubiErpsBaseRingId Integer32,
ubiErpsBaseEastIf Integer32,
ubiErpsBaseWestIf Integer32,
ubiErpsBaseInstId Integer32,
ubiErpsBaseRowStatus RowStatus
}
ubiErpsBaseBridgeId OBJECT-TYPE
SYNTAX UbiBridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ERPS Base Bridge ID."
::= { ubiErpsBaseEntry 1 }
ubiErpsBaseRingId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ERPS Base Ring ID."
::= { ubiErpsBaseEntry 2 }
ubiErpsBaseEastIf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ERPS Base East Ring port."
::= { ubiErpsBaseEntry 3 }
ubiErpsBaseWestIf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ERPS Base West Ring port."
::= { ubiErpsBaseEntry 4 }
ubiErpsBaseInstId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ERPS Base Instance ID."
::= { ubiErpsBaseEntry 5 }
ubiErpsBaseRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row."
::= { ubiErpsBaseEntry 6 }
-- *****************************************************************
-- ubiErpsVlanTable
-- *****************************************************************
ubiErpsVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiErpsVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of ERPS Vlan information."
::= { ubiErpsMIBObjects 2 }
ubiErpsVlanEntry OBJECT-TYPE
SYNTAX UbiErpsVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of ERPS Vlan information."
INDEX { ubiErpsBaseBridgeId, ubiErpsBaseRingId,
ubiErpsVlanVlanId, ubiErpsVlanServiceVlan }
::= { ubiErpsVlanTable 1 }
UbiErpsVlanEntry ::= SEQUENCE {
ubiErpsVlanVlanId VlanIndex,
ubiErpsVlanServiceVlanType INTEGER,
ubiErpsVlanRowStatus RowStatus
}
ubiErpsVlanVlanId OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Vlan ID."
::= { ubiErpsVlanEntry 1 }
ubiErpsVlanServiceVlanType OBJECT-TYPE
SYNTAX INTEGER {
service_vlan(1),
protected_vlan(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ERPS Vlan Type.
service_vlan(1) - Control Vlan
protected_vlan(2) - Service Valn"
::= { ubiErpsVlanEntry 2 }
ubiErpsVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row."
::= { ubiErpsVlanEntry 3 }
-- *****************************************************************
-- ubiErpsSwitchTable
-- *****************************************************************
ubiErpsSwitchTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiErpsSwitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of ERPS Switch information."
::= { ubiErpsMIBObjects 3 }
ubiErpsSwitchEntry OBJECT-TYPE
SYNTAX UbiErpsSwitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of ERPS Switch information."
INDEX { ubiErpsSwitchBridgeId, ubiErpsSwitchRingId }
::= { ubiErpsSwitchTable 1 }
UbiErpsSwitchEntry ::= SEQUENCE {
ubiErpsSwitchBridgeId UbiBridgeId,
ubiErpsSwitchRingId Integer32,
ubiErpsSwitchVersion INTEGER,
ubiErpsSwitchNodeType INTEGER,
ubiErpsSwitchEastIf Integer32,
ubiErpsSwitchWestIf Integer32,
ubiErpsSwitchEastIfState INTEGER,
ubiErpsSwitchWestIfState INTEGER,
ubiErpsSwitchRingProtectionLink INTEGER,
ubiErpsSwitchRevertiveMode TruthValue,
ubiErpsSwitchMegLevel Integer32,
ubiErpsSwitchPropagateTc TruthValue,
ubiErpsSwitchGuardTimer Integer32,
ubiErpsSwitchHoldOff Integer32,
ubiErpsSwitchWaitToRestore Integer32,
ubiErpsSwitchWaitToBlock Integer32,
ubiErpsSwitchMajorRingId Integer32,
ubiErpsSwitchEthoamEvent TruthValue,
ubiErpsSwitchForcedSwitch INTEGER,
ubiErpsSwitchManualSwitch INTEGER,
ubiErpsSwitchClear INTEGER,
ubiErpsSwitchCurrentState INTEGER,
ubiErpsSwitchLastEvent INTEGER,
ubiErpsSwitchSuppressEast TruthValue,
ubiErpsSwitchSuppressWest TruthValue,
ubiErpsSwitchCotNode TruthValue,
ubiErpsSwitchCotNbrPort INTEGER,
ubiErpsSwitchMdName Dot1agCfmMaintDomainName,
ubiErpsSwitchMaName Dot1agCfmMaintAssocName
}
ubiErpsSwitchBridgeId OBJECT-TYPE
SYNTAX UbiBridgeId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Bridge ID ERPS is running."
::= { ubiErpsSwitchEntry 1 }
ubiErpsSwitchRingId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"G8032 ERPS Ring ID."
::= { ubiErpsSwitchEntry 2 }
ubiErpsSwitchVersion OBJECT-TYPE
SYNTAX INTEGER (1 | 2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"G8032 ERPS Version.
1 - Version 1
2 - Version 2"
::= { ubiErpsSwitchEntry 3 }
ubiErpsSwitchNodeType OBJECT-TYPE
SYNTAX INTEGER {
ring_none(1),
rpl_owner(2),
rpl_neighbor(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"G8032 ERPS Node Type.
ring_none(1) - non-RPL Owner
rpl_owner(2) - RPL Owner
rpl_neigbor(3) - RPL Neighober"
::= { ubiErpsSwitchEntry 4 }
ubiErpsSwitchEastIf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"East Ring port of ERPS."
::= { ubiErpsSwitchEntry 5 }
ubiErpsSwitchWestIf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"West Ring port of ERPS."
::= { ubiErpsSwitchEntry 6 }
ubiErpsSwitchEastIfState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
block(2),
forward(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port status of east ring port."
::= { ubiErpsSwitchEntry 7 }
ubiErpsSwitchWestIfState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
block(2),
forward(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port status of west ring port."
::= { ubiErpsSwitchEntry 8 }
ubiErpsSwitchRingProtectionLink OBJECT-TYPE
SYNTAX INTEGER {
none(1),
east(2),
west(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indication of Ring protection link(RPL).
none(1) - non-RPL
east(2) - East port is RPL
wast(3) - West port is RPL"
::= { ubiErpsSwitchEntry 9 }
ubiErpsSwitchRevertiveMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"G8032 ERPS Switch Mode.
- If this is configured, it is revertive mode,
is not, it is non-revertive mode."
::= { ubiErpsSwitchEntry 10 }
ubiErpsSwitchMegLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"G8032 ERPS MEG Level."
::= { ubiErpsSwitchEntry 11 }
ubiErpsSwitchPropagateTc OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this is configured, when sub-ring topolgy is changed,
sub-ring transmits Topology Change Message to major-ring."
::= { ubiErpsSwitchEntry 12 }
ubiErpsSwitchGuardTimer OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Guard Timer value."
::= { ubiErpsSwitchEntry 13 }
ubiErpsSwitchHoldOff OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hold-off Timer value."
::= { ubiErpsSwitchEntry 14 }
ubiErpsSwitchWaitToRestore OBJECT-TYPE
SYNTAX Integer32
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Wait to Restore Timer value."
::= { ubiErpsSwitchEntry 15 }
ubiErpsSwitchWaitToBlock OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Waith to Block Timer value."
::= { ubiErpsSwitchEntry 16 }
ubiErpsSwitchMajorRingId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Major-ring ID who is inter operated."
::= { ubiErpsSwitchEntry 17 }
ubiErpsSwitchEthoamEvent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable interopering with CFM CCM."
::= { ubiErpsSwitchEntry 18 }
ubiErpsSwitchForcedSwitch OBJECT-TYPE
SYNTAX INTEGER {
none(1),
east(2),
west(3),
both(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indication of Forced swith ring port.
none - none
east - east ring port
west - west ring port
both - both ring port"
::= { ubiErpsSwitchEntry 19 }
ubiErpsSwitchManualSwitch OBJECT-TYPE
SYNTAX INTEGER {
none(1),
east(2),
west(3),
both(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indication of Manual swith ring port.
none - none
east - east ring port
west - west ring port
both - both ring port"
::= { ubiErpsSwitchEntry 20 }
ubiErpsSwitchClear OBJECT-TYPE
SYNTAX INTEGER {
none(1),
east(2),
west(3),
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear Forced/Manual swith."
::= { ubiErpsSwitchEntry 21 }
ubiErpsSwitchCurrentState OBJECT-TYPE
SYNTAX INTEGER
{
init(1),
idle(2),
protection(3),
manual_switch(4),
forced_switch(5),
pending(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Informaiont of ERPS current state.
init(1)
- Initialize State machine: One of ring ports is blocked.
idle(2)
- Idle state: RPL is blocked and ring ports of others are unblocked.
protection(3)
- Protection state: When links are failed,
RPL is unblocked and ring ports of others are unblocked.
manual_switch(4)
- Manual switch state: Manually switched port is blocked
and ring ports of others are unblocked.
forced_switch(5)
- Force switch state: Forcedly switched ports are blocked
and ring ports of others are unblocked.
pending(6)
- Pneding state: When status of links changed to 'unfailed',
one of them is still unblocked."
::= { ubiErpsSwitchEntry 22 }
ubiErpsSwitchLastEvent OBJECT-TYPE
SYNTAX INTEGER {
r_aps_nr(1),
r_aps_nr_rb(2),
r_aps_wtb_running(3),
wtb_expires(4),
r_aps_wtr_running(5),
wtr_expires(6),
ms(7),
r_aps_ms(8),
clear(9),
l_clear_sf(10),
l_sf(11),
r_aps_sf(12),
fs(13),
r_aps_fs(14),
event_flush_req(15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last Event of ERPS.
r_aps_nr(1) - received R-APS(NR)
r_aps_nr_rb(2) - received R-APS(NR/RB)
r_aps_wtb_running(3) - WTB is started
wtb_espires(4) - WTB is expired
r_aps_wtr_running(5) - WTR is started
wtr_expires(6) - WTR is expired
ms(7) - Manual switched
r_aps_ms(8) - rceived R-APS(MS)
clear(9) - Clear Pending/MS/FS state
l_clear_sf(10) - Local clear SF
l_sf(11) - Local SF
r_aps_sf(12) - received R-APS(SF)
fs(13) - Forced switch
r_aps_fs(14) - rceived R-APS(FS)
event_flush_req(15) - rceived R-APS(Flush request)"
::= { ubiErpsSwitchEntry 23 }
ubiErpsSwitchSuppressEast OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Suppress trasmission R-APS to east ring port."
::= { ubiErpsSwitchEntry 24 }
ubiErpsSwitchSuppressWest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"uppress trasmission R-APS to west ring port"
::= { ubiErpsSwitchEntry 25 }
ubiErpsSwitchCotNode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indication of COT node."
::= { ubiErpsSwitchEntry 26 }
ubiErpsSwitchCotNbrPort OBJECT-TYPE
SYNTAX INTEGER {
none(1),
east(2),
west(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indication of COT neighbor port.
none(1) - none
east(2) - east ring port
west(3) - west ring port"
::= { ubiErpsSwitchEntry 27 }
ubiErpsSwitchMdName OBJECT-TYPE
SYNTAX Dot1agCfmMaintDomainName
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CFM Maintenance Domain Name for inter operation."
::= { ubiErpsSwitchEntry 28 }
ubiErpsSwitchMaName OBJECT-TYPE
SYNTAX Dot1agCfmMaintAssocName
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"CFM Maintenance association Name for inter operation."
::= { ubiErpsSwitchEntry 29 }
-- *****************************************************************
-- ubiErpsGlobal
-- *****************************************************************
ubiErpsGlobalHoldOff OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global hold-off timer value."
::= { ubiErpsGlobal 1 }
-- *****************************************************************
-- ubiErpsNotificationEnables
-- *****************************************************************
ubiErpsRingStateChangeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable Notificaion of ERPS State Change."
::= { ubiErpsNotificationEnables 1 }
ubiErpsRingEastIfStateChangeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable Notificaiont of East Port Status Change."
::= { ubiErpsNotificationEnables 2 }
ubiErpsRingWestIfStateChangeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable Notificaiont of East Port Status Change."
::= { ubiErpsNotificationEnables 3 }
-- ***********************************************************
-- ubiIfErpsTable
-- ***********************************************************
ubiIfErpsTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiIfErpsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of ERPS information on interface."
::= { ubiErpsMIBObjects 6 }
ubiIfErpsEntry OBJECT-TYPE
SYNTAX UbiIfErpsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of ERPS information on interface."
INDEX { ifIndex }
::= { ubiIfErpsTable 1 }
UbiIfErpsEntry ::= SEQUENCE
{
ubiIfErpsAggMinLink Integer32
}
ubiIfErpsAggMinLink OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minmum Link count to activate Port-channel in ERPS.
- To activate Port-channel, actived members of port-channel
must be minmum link count at least."
::= { ubiIfErpsEntry 1 }
-- *****************************************************************
-- ubiErpsMIBConformance
-- *****************************************************************
-- Conformance Information
ubiErpsMIBCompliances OBJECT IDENTIFIER ::= { ubiErpsMIBConformance 1 }
ubiErpsMIBGroups OBJECT IDENTIFIER ::= { ubiErpsMIBConformance 2 }
-- compliance statements
ubiErpsMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for VTP implementations."
MODULE -- this module
MANDATORY-GROUPS {
ubiErpsBaseGroup
}
::= { ubiErpsMIBCompliances 1 }
-- units of conformance
ubiErpsBaseGroup OBJECT-GROUP
OBJECTS {
}
STATUS current
DESCRIPTION
""
::= { ubiErpsMIBGroups 1 }
END