mibs/MIBS/ubiquoss/UBQS-IP-MIB

-- *****************************************************************
-- UBQS-IP-MIB : Ubiquoss IP Information MIB
--   
-- Dec 2010,  Park Hyung Eun
--
-- Copyright (c) 2010 by Ubiquoss, Corp.
--   
-- All rights reserved.
-- ***************************************************************

UBQS-IP-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,            
    Unsigned32,
    Integer32,
    NOTIFICATION-TYPE
        FROM SNMPv2-SMI              
    MODULE-COMPLIANCE,
    OBJECT-GROUP,
    NOTIFICATION-GROUP
        FROM SNMPv2-CONF     
    RowStatus,
    TimeStamp,
    DisplayString,    
    TruthValue,       
    TEXTUAL-CONVENTION,              
    PhysAddress
        FROM SNMPv2-TC     
    InetAddress, 
    InetAddressType,
    InetAddressPrefixLength, 
    	FROM INET-ADDRESS-MIB      
    InterfaceIndex                     
    	FROM IF-MIB      
    ubiMgmtv2
        FROM UBQS-SMI;


ubiIpMIB MODULE-IDENTITY
        LAST-UPDATED    "201012280000Z"
        ORGANIZATION 	"Ubiquoss Corp."
	    CONTACT-INFO
		"	Ubiquoss
			Customer Service

		 Postal: 24F Milennium B/D,
		 	467-12, Dogok-Dong,
			GangNam-Gu, Seoul 135-270
			Korea

		   Tel: 82-2-2190-3100"   
    DESCRIPTION
        "This MIB module defines IP information."
     ::= { ubiMgmtv2 14 }



-- ***********************************************************
-- Textual Conventions
-- ***********************************************************          
 
-- ***************************************************************
--   ubiInterfaceMIB
-- ***************************************************************
ubiIpMIBNotificationPrefix  	OBJECT IDENTIFIER		::= { ubiIpMIB 0 } 
ubiIpMIBObjects  				OBJECT IDENTIFIER		::= { ubiIpMIB 1 }     
ubiPingMIBObjects				OBJECT IDENTIFIER		::= { ubiIpMIB 2 } 
ubiIpMIBConformance  			OBJECT IDENTIFIER		::= { ubiIpMIB 3 }
        
ubiPingGlobal					OBJECT IDENTIFIER		::= { ubiPingMIBObjects 1 }        
ubiPingSend						OBJECT IDENTIFIER		::= { ubiPingMIBObjects 2 }  
ubiPingResults					OBJECT IDENTIFIER		::= { ubiPingMIBObjects 3 }                   
                       
                         
                         
                         
                         
 -- ***************************************************************
--   ubiIpMIBNotificationPrefix
-- ***************************************************************
ubiIpMIBNotifications  		OBJECT IDENTIFIER		::= { ubiIpMIBNotificationPrefix 1 }  
ubiPingMIBNotifications  	OBJECT IDENTIFIER		::= { ubiIpMIBNotificationPrefix 2 }  

	ubiPingSendCompletion NOTIFICATION-TYPE
    	OBJECTS         { 
    			ubiPingSendCompleted,       
    			ubiPingSendPackets,
    			ubiPingReceivedPackets    			        
    	}
    	STATUS          current
    	DESCRIPTION
        	"This notification is sent at the completion 
        	of the sequence of pings."
   	::= { ubiPingMIBNotifications 1 }
                         
                         
                         
                                           
-- ***********************************************************
-- ubiIpAddrTable
-- ***********************************************************
	ubiIpAddrTable OBJECT-TYPE
    	SYNTAX          SEQUENCE OF UbiIpAddrEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"The table of addressing information relevant to
 			 this entity's IP addresses."
    	::= { ubiIpMIBObjects 1 }

	ubiIpAddrEntry OBJECT-TYPE
    	SYNTAX          UbiIpAddrEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"The addressing information for one of this
 			entity's IP addresses."
    	INDEX           { ubiIpAddrType, ubiIpAddress, ubiIpAddrPrefixLen } 
    	::= { ubiIpAddrTable 1 }

	UbiIpAddrEntry ::= SEQUENCE {         
			ubiIpAddrType						InetAddressType,  
			ubiIpAddress						InetAddress,  
			ubiIpAddrIfIndex					InterfaceIndex,  
			ubiIpAddrPrefixLen                  InetAddressPrefixLength,
			ubiIpAddrStatus						INTEGER, 
			ubiIpAddrRowstatus					RowStatus,     
	}
  
 	ubiIpAddrType OBJECT-TYPE
    	SYNTAX          InetAddressType
    	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
        	"The IP address type.        
        	
				ipv4(1)     An IPv4 address as defined by the
							InetAddressIPv4 textual convention.

				ipv6(2)     An IPv6 address as defined by the
							InetAddressIPv6 textual convention."
	   	::= { ubiIpAddrEntry 1 }   
    
 	ubiIpAddress OBJECT-TYPE
    	SYNTAX          InetAddress
    	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
        	"The IP address to which this entry's addressing 
        	information pertains."
	   	::= { ubiIpAddrEntry 2 } 

   	ubiIpAddrPrefixLen OBJECT-TYPE
        SYNTAX			InetAddressPrefixLength
        MAX-ACCESS      read-only
    	STATUS          current
   		DESCRIPTION
        	"The prefix length associated with the IP address."
       	::= { ubiIpAddrEntry 3 }
                                  	   	    
  	ubiIpAddrIfIndex OBJECT-TYPE
    	SYNTAX          InterfaceIndex
    	MAX-ACCESS      read-create
    	STATUS          current
   		DESCRIPTION
        	"The index value which uniquely identifies 
        	the interface to which this entry is applicable." 
    	::= { ubiIpAddrEntry 4 }    
  
  	ubiIpAddrStatus OBJECT-TYPE
    	SYNTAX          INTEGER {      
    		primary(1),
    		secondary(2)
    	}
    	MAX-ACCESS      read-create
    	STATUS          current
    	DESCRIPTION
        	"Indicate whether this entry is primary or not." 
    	DEFVAL			{ primary }
    	::= { ubiIpAddrEntry 5 }    
    
  
  	ubiIpAddrRowstatus OBJECT-TYPE      
    	SYNTAX          RowStatus
    	MAX-ACCESS      read-create
    	STATUS          current
    	DESCRIPTION
        	"This object is used to create a new row or 
 			delete an existing row in this table." 
    	::= { ubiIpAddrEntry 6 }
                                         

-- ***********************************************************
-- ubiInetRouteTable
-- ***********************************************************
	ubiInetRouteTable OBJECT-TYPE
    	SYNTAX          SEQUENCE OF UbiInetRouteEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"The table of addressing information relevant to
 			 this entity's IP addresses."
    	::= { ubiIpMIBObjects 2 }

	ubiInetRouteEntry OBJECT-TYPE
    	SYNTAX          UbiInetRouteEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"The addressing information for one of this
 			entity's IP addresses."
    	INDEX           { ubiInetRouteInstance,
    					  ubiInetRouteDestType, ubiInetRouteDest, ubiInetRouteDestPfxLen, 
    					  ubiInetRouteNextHopType, ubiInetRouteNextHop, ubiInetRouteIfIndex } 
    	::= { ubiInetRouteTable 1 }

	UbiInetRouteEntry ::= SEQUENCE {   
			ubiInetRouteInstance				Unsigned32,     
			ubiInetRouteDestType				InetAddressType,  
			ubiInetRouteDest					InetAddress,     
			ubiInetRouteDestPfxLen				InetAddressPrefixLength, 
			ubiInetRouteNextHopType				InetAddressType,  
			ubiInetRouteNextHop					InetAddress,  
			ubiInetRouteIfIndex					InterfaceIndex,
			ubiInetRoutetype					INTEGER,      
			ubiInetRouteProto					INTEGER,     
			ubiInetRouteMetric1					Integer32,  
			ubiInetRouteMetric2					Integer32,
			ubiInetRouteMetric3					Integer32,
			ubiInetRouteMetric4					Integer32,
			ubiInetRouteMetric5					Integer32,   
			ubiInetRouteStatus					INTEGER,       
			ubiInetRouteDistance				Integer32,
			ubiInetRouteTag						Unsigned32,  
			ubiInetRouteNextHopName				DisplayString,
			ubiInetRouteRowstatus				RowStatus,     
	}
            
            
 	ubiInetRouteInstance OBJECT-TYPE
    	SYNTAX          Unsigned32
    	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
        	"The instance identifier of the (conceptual) routing table
        	containing this route."
	   	::= { ubiInetRouteEntry 1 } 
  
 	ubiInetRouteDestType OBJECT-TYPE
    	SYNTAX          InetAddressType
    	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
        	"The destination address type.        
        	
				ipv4(1)     An IPv4 address as defined by the
							InetAddressIPv4 textual convention.

				ipv6(2)     An IPv6 address as defined by the
							InetAddressIPv6 textual convention."
	   	::= { ubiInetRouteEntry 2 }   
    
 	ubiInetRouteDest OBJECT-TYPE
    	SYNTAX          InetAddress
    	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
        	"The destination IP address of this route."
	   	::= { ubiInetRouteEntry 3 } 

   	ubiInetRouteDestPfxLen OBJECT-TYPE
        SYNTAX			InetAddressPrefixLength
        MAX-ACCESS      read-only
    	STATUS          current
   		DESCRIPTION
        	""
       	::= { ubiInetRouteEntry 4 }

 	ubiInetRouteNextHopType OBJECT-TYPE
    	SYNTAX          InetAddressType
    	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
        	""
	   	::= { ubiInetRouteEntry 5 }   
    
 	ubiInetRouteNextHop OBJECT-TYPE
    	SYNTAX          InetAddress
    	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
        	""
	   	::= { ubiInetRouteEntry 6 } 

 	ubiInetRouteIfIndex OBJECT-TYPE
    	SYNTAX          InterfaceIndex
    	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
        	""
	   	::= { ubiInetRouteEntry 7 } 
 
 	ubiInetRoutetype OBJECT-TYPE
    	SYNTAX          INTEGER {
    		other(1),
    		invalid(2),
    		direct(3),
    		indirect(4)
    	}
    	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
        	""
	   	::= { ubiInetRouteEntry 8 }                                                    
                                             
 	ubiInetRouteProto OBJECT-TYPE
    	SYNTAX          INTEGER  {
    	     other(1),
    	     local(2),
    	     netmgmt(3),
    	     icmp(4),
    	     egp(5),
    	     ggp(6), 
    	     hello(7),
    	     rip(8),
    	     isis(9),
    	     esis(10),
    	     ciscoIgrp(11),
    	     bbnSpfIgp(12),
    	     ospf(13),
    	     bgp(14)
    	}
    	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
        	""
	   	::= { ubiInetRouteEntry 9 }               
     
 	ubiInetRouteMetric1 OBJECT-TYPE
    	SYNTAX          Integer32
    	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
        	""
	   	::= { ubiInetRouteEntry 10 }  

 	ubiInetRouteMetric2 OBJECT-TYPE
    	SYNTAX          Integer32
    	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
        	""
	   	::= { ubiInetRouteEntry 11 }        
	   	
 	ubiInetRouteMetric3 OBJECT-TYPE
    	SYNTAX          Integer32
    	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
        	""
	   	::= { ubiInetRouteEntry 12 }  
	   	
 	ubiInetRouteMetric4 OBJECT-TYPE
    	SYNTAX          Integer32
    	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
        	""
	   	::= { ubiInetRouteEntry 13 }  
	   	
 	ubiInetRouteMetric5 OBJECT-TYPE
    	SYNTAX          Integer32
    	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
        	""
	   	::= { ubiInetRouteEntry 14 }           
	   	
 	ubiInetRouteStatus OBJECT-TYPE
    	SYNTAX          INTEGER {
    		active(1),
    		inactive(2),
    	}
    	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
        	""
	   	::= { ubiInetRouteEntry 15 }       	   	

 	ubiInetRouteDistance OBJECT-TYPE
    	SYNTAX          Integer32 (1..255)
    	MAX-ACCESS      read-write
    	STATUS          current    
    	DESCRIPTION
        	""
	   	::= { ubiInetRouteEntry 16 }    

 	ubiInetRouteTag OBJECT-TYPE
    	SYNTAX          Unsigned32
    	MAX-ACCESS      read-write
    	STATUS          current    
    	DESCRIPTION
        	""
	   	::= { ubiInetRouteEntry 17 }    

 	ubiInetRouteNextHopName OBJECT-TYPE
    	SYNTAX          DisplayString
    	MAX-ACCESS      read-write
    	STATUS          current    
    	DESCRIPTION
        	""
	   	::= { ubiInetRouteEntry 18 }       

 	ubiInetRouteRowstatus OBJECT-TYPE
    	SYNTAX          RowStatus
    	MAX-ACCESS      read-create
    	STATUS          current    
    	DESCRIPTION
        	""
	   	::= { ubiInetRouteEntry 19 }       

-- ***********************************************************
-- ubiIpv6NeighborTable
-- *********************************************************** 

	ubiIpv6NeighborTable OBJECT-TYPE
    	SYNTAX          SEQUENCE OF UbiIpv6NeighborEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"The table of addressing information relevant to
 			 this entity's IPv6 addresses."
    	::= { ubiIpMIBObjects 3 }

	ubiIpv6NeighborEntry OBJECT-TYPE
    	SYNTAX          UbiIpv6NeighborEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"The addressing information for one of this
 			entity's IPv6 addresses."
    	INDEX           { ubiIpv6NeighborIfIndex, ubiIpv6NeighborNetAddress }
    	::= { ubiIpv6NeighborTable 1 }
    	
    UbiIpv6NeighborEntry ::= SEQUENCE {
    	ubiIpv6NeighborIfIndex				InterfaceIndex,
    	ubiIpv6NeighborPhysAddress			PhysAddress,
    	ubiIpv6NeighborNetAddress			InetAddress,
    	ubiIpv6NeighborType					INTEGER,
    	ubiIpv6NeighborState				INTEGER,
    	ubiIpv6NeighborLastUpdated			TimeStamp,
    	ubiIpv6NeighborRowstatus			RowStatus
    }
    
    ubiIpv6NeighborIfIndex OBJECT-TYPE
    	SYNTAX			InterfaceIndex
    	MAX-ACCESS		read-only
    	STATUS			current
    	DESCRIPTION
    		"The inde value which uniquely identifies
    		the interface to which this entry is applicable"
    	::= { ubiIpv6NeighborEntry 1 }

    ubiIpv6NeighborPhysAddress OBJECT-TYPE
    	SYNTAX		PhysAddress (SIZE(0..65535))
    	MAX-ACCESS	read-create
    	STATUS		current
    	DESCRIPTION
    		"The media-dependent `physical' address.  This object should
            return 0 when this entry is in the 'incomplete' state.

            As the entries in this table are typically not persistent
            when this object is written the entity should not save the
            change to non-volatile storage.  Note: a stronger
            requirement is not used because this object was previously
            defined."
        ::= { ubiIpv6NeighborEntry 2 }
    
	ubiIpv6NeighborNetAddress OBJECT-TYPE
    	SYNTAX     InetAddress
    	MAX-ACCESS read-only
    	STATUS     current
    	DESCRIPTION
           "The Ipv6Address corresponding to the media-dependent
            `physical' address.

            This object predates the rule limiting index objects to a
            max access value of 'not-accessible' and so continues to use
            a value of 'read-create'."
    	::= { ubiIpv6NeighborEntry 3 }

	ubiIpv6NeighborType OBJECT-TYPE
		SYNTAX     INTEGER {
			dynamic(0),
			static(1)
		}
    	MAX-ACCESS read-only
    	STATUS     current
    	DESCRIPTION
           "The type of mapping.

            Setting this object to the value invalid(2) has the effect

            of invalidating the corresponding entry in the
            ubiIpv6NeighborTable.  That is, it effectively dis-associates
            the interface identified with said entry from the mapping
            identified with said entry.  It is an implementation-
            specific matter as to whether the agent removes an
            invalidated entry from the table.  Accordingly, management
            stations must be prepared to receive tabular information
            from agents that corresponds to entries not currently in
            use.  Proper interpretation of such entries requires
            examination of the relevant ubiIpv6NeighborType object.

            As the entries in this table are typically not persistent
            when this object is written the entity should not save the
            change to non-volatile storage.  Note: a stronger
            requirement is not used because this object was previously
            defined."
    	::= { ubiIpv6NeighborEntry 4 }

	ubiIpv6NeighborState OBJECT-TYPE
    	SYNTAX     INTEGER {
                   reachable(1), -- confirmed reachability
                   stale(2),     -- unconfirmed reachability
                   delay(3),     -- waiting for reachability
                                 -- confirmation before entering
                                 -- the probe state
                   probe(4),     -- actively probing
                   invalid(5),   -- an invalidated mapping
                   unknown(6),   -- state can not be determined
                                 -- for some reason.
                   incomplete(7) -- address resolution is being
                                 -- performed.
    	          }
    	MAX-ACCESS read-only
    	STATUS     current
    	DESCRIPTION
            "The Neighbor Unreachability Detection [3] state for the
             interface when the address mapping in this entry is used.
             If Neighbor Unreachability Detection is not in use,
             this object is always unknown(6)."
    	REFERENCE "RFC2461"
    		::= { ubiIpv6NeighborEntry 5 }


	ubiIpv6NeighborLastUpdated OBJECT-TYPE
	    SYNTAX     TimeStamp
	    MAX-ACCESS read-only
	    STATUS     current
	    DESCRIPTION
            "The value of sysUpTime at the time this entry was last
             updated.  If this entry was updated prior to the last re-
             initialization of the local network management subsystem,
             then this object contains a zero value."
    	::= { ubiIpv6NeighborEntry 6 }
    
	ubiIpv6NeighborRowstatus OBJECT-TYPE
		SYNTAX     RowStatus
		MAX-ACCESS read-create
		STATUS     current
		DESCRIPTION
           "The status of this conceptual row.

            As all objects in this conceptual row have default values, a
            row can be created and made active by setting this object
            appropriately.

            The RowStatus TC requires that this DESCRIPTION clause
            states under which circumstances other objects in this row
            can be modified.  The value of this object has no effect on
            whether other objects in this conceptual row can be
            modified."
		::= { ubiIpv6NeighborEntry 7 }
	   		   		   	                                      
-- ***********************************************************
-- ubiIpPingObject
-- ***********************************************************   
 
-- ubiPingSend          

	ubiPingSendProto	OBJECT-TYPE
		SYNTAX		INTEGER {     
			other(1),
			ip(2),
			ipv6(3)
		}       
		ACCESS		read-write
		STATUS		current	 
		DESCRIPTION
			"The protocol to use."
		::= { ubiPingSend 1  }

	ubiPingSendTarget	OBJECT-TYPE
		SYNTAX		DisplayString
		ACCESS		read-write
		STATUS		current	 
		DESCRIPTION
			"The address of the device to be pinged."
		::= { ubiPingSend 2 }
		
	ubiPingSendRepeat	OBJECT-TYPE
		SYNTAX		Integer32
		ACCESS		read-write        
		STATUS		current
		DESCRIPTION
			"Specifies the number of ping packets to send 
			to the target."  
		DEFVAL	  { 5 }
		::= { ubiPingSend 3 }
		
	ubiPingSendPacketSize	OBJECT-TYPE
		SYNTAX		Integer32(0..60000)
		ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"Specifies the size of ping packets to send 
			to the target."    
		DEFVAL	  { 100 }
		::= { ubiPingSend 4 }
                    
	ubiPingSendTimeout	OBJECT-TYPE
		SYNTAX		Integer32 
		UNITS "seconds"
		ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"Specifies the amount of time to wait for a response."      
		DEFVAL	  { 2000 }		
		::= { ubiPingSend 5 }
     
	ubiPingSendInterval	OBJECT-TYPE
		SYNTAX		Integer32
		UNITS "seconds"
		ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"Specifies the amount of time to wait before 
			sending the next packet."      
		::= { ubiPingSend 6 }

	ubiPingSendSrcAddr	OBJECT-TYPE
		SYNTAX		DisplayString
		ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"Specifies the sender IP address for sending packets."
		::= { ubiPingSend 7 }
		
	ubiPingSendTTL	OBJECT-TYPE
		SYNTAX		Integer32
		ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"Specifies the TTL."
		::= { ubiPingSend 8 }
                                  
	ubiPingSendTos	OBJECT-TYPE
		SYNTAX		Integer32
		ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"Specifies the Type Of Service."      
		::= { ubiPingSend 9 }
      
	ubiPingSendDF	OBJECT-TYPE
		SYNTAX		INTEGER {   
			none(0),
			do(1),
			dont(2)
		}
		ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"Specifies the DF bit in IP header. dont(2) means 
			a packet cannot be fragmented."      
		::= { ubiPingSend 10 }
		      
	ubiPingSendExecute	OBJECT-TYPE
		SYNTAX		INTEGER {
			send(1)
		}
		ACCESS		read-write
		STATUS		current
		DESCRIPTION
			"Send the ping packets when value is set to 
			send(1)."
		::= { ubiPingSend 15 }


                                  
-- ubiPingResults                             
 	ubiPingSendCompleted	OBJECT-TYPE
		SYNTAX		TruthValue
		ACCESS		accessible-for-notify
		STATUS		current
		DESCRIPTION
			"Set to true when all the packets in this sequence have been
 			either responded to or timed out."
		::= { ubiPingResults 1 }

	ubiPingSendPackets	OBJECT-TYPE
		SYNTAX		Counter32
		ACCESS		accessible-for-notify
		STATUS		current
		DESCRIPTION
			"The total number of the sending ping."
		::= { ubiPingResults 2 }

	ubiPingReceivedPackets	OBJECT-TYPE
		SYNTAX		Counter32
		ACCESS		accessible-for-notify
		STATUS		current
		DESCRIPTION
			"The total number of the received ping."
		::= { ubiPingResults 3 }
                         
                         
-- ***********************************************************
-- ubiIpMIBConformance
-- ***********************************************************
ubiIpMIBCompliances  	OBJECT IDENTIFIER		::= { ubiIpMIBConformance 1 }
ubiIpMIBGroups  	 	OBJECT IDENTIFIER		::= { ubiIpMIBConformance 2 }
-- Compliance

	ubiIpMIBCompliance MODULE-COMPLIANCE
    	STATUS          current
    	DESCRIPTION
        	"The compliance statement for entities which
        	implement the UBQS-IP-MIB"
   	 	MODULE          -- this module
    	MANDATORY-GROUPS {  
    			ubiIpAddrGroup,            
                ubiPingGroup
           }  
        GROUP    ubiIpAddrGroup
        DESCRIPTION 
        	"The ubiIpAddrGroup is applicable for implementations which
 			need to get the address information of the system."    
 			  
        GROUP    ubiPingGroup
        DESCRIPTION 
        	"The ubiPingGroup is applicable for implementations which
 			need to test the ping."
    	::= { ubiIpMIBCompliances 2 }


	ubiIpAddrGroup OBJECT-GROUP
    	OBJECTS         {     
    		ubiIpAddrType,
    		ubiIpAddress,
    		ubiIpAddrIfIndex,       
    		ubiIpAddrPrefixLen ,
    		ubiIpAddrStatus ,
    		ubiIpAddrRowstatus 
    	}   
    	STATUS          current
    	DESCRIPTION
        	"A collection of objects containing
        	information about the address information of system."
    	::= { ubiIpMIBGroups 1 }
    	                               

	ubiPingGroup OBJECT-GROUP
    	OBJECTS         {     
    		ubiPingSendProto,
    		ubiPingSendTarget,
    		ubiPingSendRepeat,       
    		ubiPingSendPacketSize ,
    		ubiPingSendTimeout ,
    		ubiPingSendInterval,
       		ubiPingSendSrcAddr,       
    		ubiPingSendTtl ,      
    		ubiPingSendTos,
    		ubiPingSendDF,
    		ubiPingSendExecute ,            
    		ubiPingSendCompleted,
       		ubiPingSendPackets,       
    		ubiPingReceivedPackets
       	}   
    	STATUS          current
    	DESCRIPTION
        	"A collection of objects containing
        	information about the ping."
    	::= { ubiIpMIBGroups 2 }
    	
                
    	                               
END