Initial commit
This commit is contained in:
David Leutgeb
525
MIBS/awplus/AT-NTP-MIB
Normal file
525
MIBS/awplus/AT-NTP-MIB
Normal file
@ -0,0 +1,525 @@
|
||||
--============================================================================
|
||||
-- at-ntp.mib, Allied Telesis enterprise MIB: Network Time Protocol
|
||||
--
|
||||
-- Copyright (c) 2008 by Allied Telesis, Inc.
|
||||
-- All rights reserved.
|
||||
--
|
||||
--===========================================================================
|
||||
|
||||
AT-NTP-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
IMPORTS
|
||||
modules
|
||||
FROM AT-SMI-MIB
|
||||
Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY
|
||||
FROM SNMPv2-SMI
|
||||
DisplayString, RowStatus, TruthValue
|
||||
FROM SNMPv2-TC;
|
||||
|
||||
|
||||
atNtp MODULE-IDENTITY
|
||||
LAST-UPDATED "201009070000Z"
|
||||
ORGANIZATION
|
||||
"Allied Telesis, Inc"
|
||||
CONTACT-INFO
|
||||
"http://www.alliedtelesis.com"
|
||||
DESCRIPTION
|
||||
"This MIB file contains definitions of managed objects
|
||||
for the Allied Telesis Network Time Protocol configuration. "
|
||||
REVISION "201009070000Z"
|
||||
DESCRIPTION
|
||||
"Generic syntax tidy up"
|
||||
REVISION "201006150015Z"
|
||||
DESCRIPTION
|
||||
"MIB revision history dates in descriptions updated."
|
||||
REVISION "200811110000Z"
|
||||
DESCRIPTION
|
||||
"Initial revision. "
|
||||
::= { modules 502 }
|
||||
|
||||
|
||||
|
||||
|
||||
--
|
||||
-- Node definitions
|
||||
--
|
||||
|
||||
-- oid assignment and reserves
|
||||
-- 1 accessGroup
|
||||
-- 2 authenticate
|
||||
-- 3 authentication-delay
|
||||
-- 4 broadcastdelay
|
||||
-- 5 master
|
||||
-- 6 peer
|
||||
-- 7 server
|
||||
-- 8 trusted-key
|
||||
-- 9 counter
|
||||
-- 10 associations
|
||||
-- 11 status
|
||||
|
||||
atNtpPeerIndexNext OBJECT-TYPE
|
||||
SYNTAX INTEGER (1..65535)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object represents the next available value for
|
||||
the object 'atNtpPeerIndex'.
|
||||
|
||||
For creation of a new entry in the 'atNtpPeerTable',
|
||||
a management application should read this object,
|
||||
get the value and use the same."
|
||||
::= { atNtp 6 }
|
||||
|
||||
|
||||
atNtpPeerTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF AtNtpPeerEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table contains information on the Network Time
|
||||
Protocol (NTP) peers' configurations in the system."
|
||||
::= { atNtp 7 }
|
||||
|
||||
|
||||
atNtpPeerEntry OBJECT-TYPE
|
||||
SYNTAX AtNtpPeerEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A conceptual entry in atNtpPeerTable."
|
||||
INDEX { atNtpPeerIndex }
|
||||
::= { atNtpPeerTable 1 }
|
||||
|
||||
|
||||
AtNtpPeerEntry ::=
|
||||
SEQUENCE {
|
||||
atNtpPeerIndex
|
||||
INTEGER,
|
||||
atNtpPeerNameAddr
|
||||
DisplayString,
|
||||
atNtpPeerMode
|
||||
INTEGER,
|
||||
atNtpPeerPreference
|
||||
INTEGER,
|
||||
atNtpPeerVersion
|
||||
INTEGER,
|
||||
atNtpPeerKeyNumber
|
||||
Unsigned32,
|
||||
atNtpPeerRowStatus
|
||||
RowStatus
|
||||
}
|
||||
|
||||
atNtpPeerIndex OBJECT-TYPE
|
||||
SYNTAX INTEGER (1..65535)
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object represents the index corresponding to
|
||||
a particular NTP server or peer configuration in
|
||||
the system.
|
||||
|
||||
For creation of a new entry, the value of this object
|
||||
should be same as that of the value of
|
||||
'atNtpPeerIndexNext' object. If this is not
|
||||
the case, then the entry creation will fail."
|
||||
::= { atNtpPeerEntry 1 }
|
||||
|
||||
|
||||
atNtpPeerNameAddr OBJECT-TYPE
|
||||
SYNTAX DisplayString
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object represents host name, or the IP address,
|
||||
of the NTP peer.
|
||||
|
||||
This object is a current object for row creation.
|
||||
|
||||
When a new row is created, this object is set with
|
||||
a default value '0.0.0.0', and the management
|
||||
application should change it to a desired value by
|
||||
a SET operation."
|
||||
DEFVAL { "0.0.0.0" }
|
||||
::= { atNtpPeerEntry 2 }
|
||||
|
||||
|
||||
atNtpPeerMode OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
server(1),
|
||||
peer(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object represents the mode of the peer.
|
||||
It's value is coded as follows:
|
||||
server(1),
|
||||
peer(2)"
|
||||
DEFVAL { peer }
|
||||
::= { atNtpPeerEntry 3 }
|
||||
|
||||
|
||||
atNtpPeerPreference OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..2)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies whether this peer is the
|
||||
preferred one over the others.
|
||||
|
||||
It's value is encoded as follows:
|
||||
0 - unknown
|
||||
1 - not preferred
|
||||
2 - preferred
|
||||
|
||||
When the value of this object is 'not preferred',
|
||||
NTP chooses the peer with which to synchronize the
|
||||
time on the local system. If this object is set to
|
||||
'preferred', NTP will choose the corresponding peer to
|
||||
synchronize the time with.
|
||||
"
|
||||
DEFVAL { 0 }
|
||||
::= { atNtpPeerEntry 4 }
|
||||
|
||||
|
||||
atNtpPeerVersion OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..4)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object represents the NTP version the peer
|
||||
supports. It's value is encoded as follows:
|
||||
0 - unknown
|
||||
1 - version 1
|
||||
2 - version 2
|
||||
3 - version 3
|
||||
4 - version 4
|
||||
"
|
||||
DEFVAL { 0 }
|
||||
::= { atNtpPeerEntry 5 }
|
||||
|
||||
|
||||
atNtpPeerKeyNumber OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object represents the authentication key number."
|
||||
DEFVAL { 0 }
|
||||
::= { atNtpPeerEntry 6 }
|
||||
|
||||
|
||||
atNtpPeerRowStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The status of this row.
|
||||
|
||||
The reading of this object should have a value of
|
||||
'active(1)'.
|
||||
|
||||
For creation of new entry, a management application
|
||||
should set this object with value 'createAndGo(4)',
|
||||
and using the same value as that got from reading
|
||||
object 'atNtpPeerIndexNext', as the index for
|
||||
the new entry.
|
||||
|
||||
When an entry is created, the object 'atNtpPeerNameAddr'
|
||||
in the entry is set with a default value '0.0.0.0'.
|
||||
The management application should change it to
|
||||
a desired value with a SET operation.
|
||||
|
||||
The management application may need to take
|
||||
additional SET operations to set values for other
|
||||
objects, to ensure they have desired values.
|
||||
|
||||
For deletion of entry, a management application
|
||||
should set this object with value 'destroy(6)'.
|
||||
|
||||
Once an entry is deleted, other entries in the table
|
||||
which have bigger index than the deleted one, will
|
||||
be indexed again. Therefore a management
|
||||
application can effectively delete multiple entries
|
||||
by repeating the SET operation using the same index."
|
||||
DEFVAL { 1 }
|
||||
::= { atNtpPeerEntry 7 }
|
||||
|
||||
|
||||
atNtpAssociationTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF AtNtpAssociationEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table contains NTP association information."
|
||||
::= { atNtp 10 }
|
||||
|
||||
|
||||
atNtpAssociationEntry OBJECT-TYPE
|
||||
SYNTAX AtNtpAssociationEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An conceptual entry in atNtpAssociationTable."
|
||||
INDEX { atNtpAssociationIndex }
|
||||
::= { atNtpAssociationTable 1 }
|
||||
|
||||
|
||||
AtNtpAssociationEntry ::=
|
||||
SEQUENCE {
|
||||
atNtpAssociationIndex
|
||||
Integer32,
|
||||
atNtpAssociationPeerAddr
|
||||
DisplayString,
|
||||
atNtpAssocaitionStatus
|
||||
DisplayString,
|
||||
atNtpAssociationConfigured
|
||||
DisplayString,
|
||||
atNtpAssociationRefClkAddr
|
||||
DisplayString,
|
||||
atNtpAssociationStratum
|
||||
Integer32,
|
||||
atNtpAssociationPoll
|
||||
Integer32,
|
||||
atNtpAssociationReach
|
||||
Integer32,
|
||||
atNtpAssociationDelay
|
||||
DisplayString,
|
||||
atNtpAssociationOffset
|
||||
DisplayString,
|
||||
atNtpAssociationDisp
|
||||
DisplayString
|
||||
}
|
||||
|
||||
atNtpAssociationIndex OBJECT-TYPE
|
||||
SYNTAX Integer32 (1..2147483647)
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object represents the index corresponding to
|
||||
a particular NTP association."
|
||||
::= { atNtpAssociationEntry 1 }
|
||||
|
||||
|
||||
atNtpAssociationPeerAddr OBJECT-TYPE
|
||||
SYNTAX DisplayString
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object represents the peer's IP address or host
|
||||
name."
|
||||
::= { atNtpAssociationEntry 2 }
|
||||
|
||||
|
||||
atNtpAssocaitionStatus OBJECT-TYPE
|
||||
SYNTAX DisplayString
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates the association's status.
|
||||
It's value is defined as follows:
|
||||
master(synced),
|
||||
master(unsynced),
|
||||
selected,
|
||||
candidate,
|
||||
configured,
|
||||
unknown.
|
||||
"
|
||||
::= { atNtpAssociationEntry 3 }
|
||||
|
||||
|
||||
atNtpAssociationConfigured OBJECT-TYPE
|
||||
SYNTAX DisplayString
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates whether the association
|
||||
is from configuration or not. It's value can be
|
||||
either 'configured' or 'dynamic'.
|
||||
"
|
||||
::= { atNtpAssociationEntry 4 }
|
||||
|
||||
|
||||
atNtpAssociationRefClkAddr OBJECT-TYPE
|
||||
SYNTAX DisplayString
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates the IP address for the
|
||||
reference clock."
|
||||
::= { atNtpAssociationEntry 5 }
|
||||
|
||||
|
||||
atNtpAssociationStratum OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates the stratum of the peer clock."
|
||||
::= { atNtpAssociationEntry 6 }
|
||||
|
||||
|
||||
atNtpAssociationPoll OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "seconds"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates the time between NTP requests
|
||||
from the device to the server."
|
||||
::= { atNtpAssociationEntry 7 }
|
||||
|
||||
|
||||
atNtpAssociationReach OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates the reachability status of
|
||||
the peer."
|
||||
::= { atNtpAssociationEntry 8 }
|
||||
|
||||
|
||||
atNtpAssociationDelay OBJECT-TYPE
|
||||
SYNTAX DisplayString
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates the round trip delay between
|
||||
the device and the server."
|
||||
::= { atNtpAssociationEntry 9 }
|
||||
|
||||
|
||||
atNtpAssociationOffset OBJECT-TYPE
|
||||
SYNTAX DisplayString
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates the difference between
|
||||
the device clock and the server clock."
|
||||
::= { atNtpAssociationEntry 10 }
|
||||
|
||||
|
||||
atNtpAssociationDisp OBJECT-TYPE
|
||||
SYNTAX DisplayString
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates the lowest measure of
|
||||
error associated with peer offset based on delay,
|
||||
in seconds."
|
||||
::= { atNtpAssociationEntry 11 }
|
||||
|
||||
|
||||
atNtpStatus OBJECT IDENTIFIER ::= { atNtp 11 }
|
||||
|
||||
|
||||
atNtpSysClockSync OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates whether the system clock
|
||||
is synchronized."
|
||||
::= { atNtpStatus 1 }
|
||||
|
||||
|
||||
atNtpSysStratum OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object represents the stratum of the local clock."
|
||||
::= { atNtpStatus 2 }
|
||||
|
||||
|
||||
atNtpSysReference OBJECT-TYPE
|
||||
SYNTAX DisplayString
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object represents the current synchronization
|
||||
source."
|
||||
::= { atNtpStatus 3 }
|
||||
|
||||
|
||||
atNtpSysFrequency OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "Hz"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object represents the actual clock frequency.
|
||||
source."
|
||||
::= { atNtpStatus 4 }
|
||||
|
||||
|
||||
atNtpSysPrecision OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Signed integer indicating the precision of the system clock,
|
||||
in seconds to the nearest power of two. The value is rounded
|
||||
to the next larger power of two; for instance, a 50-Hz(20 ms)
|
||||
or 60-Hz (16.67 ms) power-frequency clock would be assigned
|
||||
the value -5 (31.25 ms), while a 1000-Hz (1 ms) crystal-controlled
|
||||
clock would be assigned the value -9 (1.95 ms)."
|
||||
::= { atNtpStatus 5 }
|
||||
|
||||
|
||||
atNtpSysRefTime OBJECT-TYPE
|
||||
SYNTAX OCTET STRING (SIZE (1..8))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates the local time when the
|
||||
local clock was last updated. If the local clock
|
||||
has never been synchronized, the value is zero"
|
||||
::= { atNtpStatus 6 }
|
||||
|
||||
|
||||
atNtpSysClkOffset OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "millisecond"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates the offset of the local clock
|
||||
relative to the server clock, in milliseconds."
|
||||
::= { atNtpStatus 7 }
|
||||
|
||||
|
||||
atNtpSysRootDelay OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "millisecond"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicats the total round-trip delay
|
||||
in milliseconds, to the primary reference source
|
||||
at the root of the synchronization subnet."
|
||||
::= { atNtpStatus 8 }
|
||||
|
||||
|
||||
atNtpSysRootDisp OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "millisecond"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates the maximum error in
|
||||
milliseconds, relative to the primary reference
|
||||
source at the root of the synchronization
|
||||
subnet."
|
||||
::= { atNtpStatus 9 }
|
||||
|
||||
|
||||
|
||||
END
|
||||
|
||||
--
|
||||
-- at-ntp.mib
|
||||
--
|
||||
|
||||
Reference in New Issue
Block a user