david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Initial commit

Browse Source
This commit is contained in:
David Leutgeb
2023-12-05 12:25:34 +01:00
commit 98a672123c
4378 changed files with 8817503 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

681
MIBS/cisco/CISCO-ENHANCED-IMAGE-MIB Normal file
View File

@ -0,0 +1,681 @@
-- *****************************************************************
-- CISCO-ENHANCED-IMAGE-MIB.my
--
-- September 2001, Narayana Pai H.
-- Jan 2005, Adithya R Sesani
--
-- Copyright (c) 2001-2005 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-ENHANCED-IMAGE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
DateAndTime,
TruthValue,
RowStatus,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
ciscoMgmt
FROM CISCO-SMI
PhysicalIndex,
entPhysicalIndex
FROM ENTITY-MIB
CeImageInstallableStatus,
CeImageInstallableType
FROM CISCO-IMAGE-TC;
ciscoEnhancedImageMIB MODULE-IDENTITY
LAST-UPDATED "200501060000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-core-mibs@cisco.com"
DESCRIPTION
"This MIB provides information about images running
on the system. It has been extended to be useful
for modular operating systems.
The image table provides information about currently
running image on the system. A modular operating
system image consists of base image and all the
installables loaded on the base image. A base image
can be obtained from ceImageTable and all the
installables installed on this image can be obtained
using ceImageInstallableTable.
Glossary:
Base Image
Essential part of the operating system,
which forms base functionality on top of
which patches can be added.
MBI (Minimum bootable image)
A small image which contains the smallest
possible amount of functionality required to
bootstrap and load a full image. This image
typically contains the kernel, the file system
drivers, and some hardware initialization code.
It is executed at boot-up, and initializes just
enough to access the rest of the code, and
run it.
Modular operating system
An operating system that exhibits runtime
modularity characteristics, such as multiple
address spaces, fault isolation between
processes, and modularity delivery and
replacement of image components.
Patch/Package/SMU (software maintenance upgrade)
A modular replacement for some piece of on-box
content, such as a binary shared object, or a text
file. This entity is meant to replace or augment
something that is already part of the base image.
Composite package
Group of packages delivered as a bundle. It is
meant to be loaded on MBI.
Script
A non-binary piece of on-box content, typically a
TCL script for use by the TCL interpreter, or
some other form of interpreted router content.
Installable
An installable can be a patch, package, composite
package, SMU or script. It is a piece of
software which can be loaded on to the base
image on a system.
Location
This term is used in this MIB to represent path
where operating system image is located. It is
the way of describing where on the file system
the installed software is located. Modular
operating system image consists of base image
and installables loaded on this base image.
Tag
Tag is a virtual label placed by user that
indicates a point deemed to be stable. It can be
used to rollback to a system after an install
that negatively impacted the functionality of the
system. It gives points in system where user can
go back to, to remove installables installed
after that point of time.
"
REVISION "200501060000Z"
DESCRIPTION
"This MIB has been extended to be useful for modular
operating systems.
Added tables ceImageLocationTable, ceImageTagTable,
ceImageInstallableTable. They are applicable to modular
operating systems and provide information about the
operating system software installed on the system.
"
REVISION "200202280000Z"
DESCRIPTION
"Initial version of the MIB. This MIB has Image table
containing the following information related to the
running OS image
1. Entity Index
2. The image name
3. Family
4. Feature set
5. Version
6. Media and
7. Description
This MIB deprecates the objects in the CISCO-IMAGE-MIB.
"
::= { ciscoMgmt 249 }
ciscoEnhancedImageMIBObjects OBJECT IDENTIFIER
::= { ciscoEnhancedImageMIB 1 }
ceImage OBJECT IDENTIFIER
::= { ciscoEnhancedImageMIBObjects 1 }
ceImageInstallable OBJECT IDENTIFIER
::= { ciscoEnhancedImageMIBObjects 2 }
ceImageTags OBJECT IDENTIFIER
::= { ciscoEnhancedImageMIBObjects 3 }
-- Textual Convention
MediaType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the media type on which the
image is loaded and is running from.
This is not the secondary storage device from
which the image is loaded. The storage device
from which the image is loaded is part of the
image name (ceImageName)."
SYNTAX INTEGER {
ram (1), -- The image is in RAM
rom (2), -- The image is in ROM
other (3) -- The image is in unknown media
}
-- Image Table
ceImageTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeImageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information describing the
executing image.
For modular operating systems this table provides
base image or MBI.
"
::= { ceImage 1 }
ceImageEntry OBJECT-TYPE
SYNTAX CeImageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An image characteristic entry."
INDEX { ceImageIndex }
::= { ceImageTable 1 }
CeImageEntry ::=
SEQUENCE {
ceImageIndex PhysicalIndex,
ceImageName SnmpAdminString,
ceImageFamily SnmpAdminString,
ceImageFeature SnmpAdminString,
ceImageVersion SnmpAdminString,
ceImageMedia MediaType,
ceImageDescription SnmpAdminString
}
ceImageIndex OBJECT-TYPE
SYNTAX PhysicalIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entPhysicalIndex from the ENTITY-MIB of
the physical entity that runs this OS image."
::= { ceImageEntry 1 }
ceImageName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the running OS image. This will also
include the path from where the image is loaded.
For example, flash:c3640-is-mz."
::= { ceImageEntry 2 }
ceImageFamily OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Family of the running OS image. The image family
indicates the platform for which the image is built.
Examples of image families -
are C3640, C7200 etc."
::= { ceImageEntry 3 }
ceImageFeature OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Feature set supported on this image. Examples of
feature set are -
ENTERPRISE, PROVIDER etc."
::= { ceImageEntry 4 }
ceImageVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Version of the running OS image."
::= { ceImageEntry 5 }
ceImageMedia OBJECT-TYPE
SYNTAX MediaType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media on which the image represented by this
entry is running."
::= { ceImageEntry 6 }
ceImageDescription OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of running OS image."
::= { ceImageEntry 7 }
ceImageLocationTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeImageLocationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is applicable to modular operating systems.
A location describes where on the file system the installed
software is placed. This table consists of list of all
locations along with status of image at that location.
ceImageLocationRunningStatus will be true only for the
location from where system is currently operational.
The agent may add entries to this table when a new image is
installed on the system. The agent may delete entries from
this table when an image has been removed from the system.
"
::= { ceImageInstallable 1 }
ceImageLocationEntry OBJECT-TYPE
SYNTAX CeImageLocationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry provides location of an image,
status of the image."
INDEX { entPhysicalIndex, ceImageLocationIndex }
::= { ceImageLocationTable 1 }
CeImageLocationEntry ::= SEQUENCE {
ceImageLocationIndex Unsigned32,
ceImageLocation SnmpAdminString,
ceImageLocationRunningStatus TruthValue
}
ceImageLocationIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer that uniquely identifies a location.
It is allocated by the system and is unique per location."
::= { ceImageLocationEntry 1 }
ceImageLocation OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Location where the operating system is installed on the
system. This is path specifying the directory where
installables can be found."
::= { ceImageLocationEntry 2 }
ceImageLocationRunningStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object will have value of true if the image from this
location is currently running on the system. For example
status will be 'true' for the location disk0:/sys, if the
system currently has image installed from this location."
::= { ceImageLocationEntry 3 }
ceImageInstallableTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeImageInstallableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies a list of software installables
installed on the system.
This table will be applicable to operating systems which
support installables. A modular operating system can
consist of base image or MBI and installables.
The value of ceImageLocationIndex can be used as index to
retrieve installables installed at a particular location.
Every image will have a table of installables. Entries are
added in this table when an installable is installed on the
image. Entries are deleted from this table when installables
are removed or rolled back from the image.
"
::= { ceImageInstallable 2 }
ceImageInstallableEntry OBJECT-TYPE
SYNTAX CeImageInstallableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry provides information about the installed
software."
INDEX {
entPhysicalIndex,
ceImageLocationIndex,
ceImageInstallableIndex
}
::= { ceImageInstallableTable 1 }
CeImageInstallableEntry ::= SEQUENCE {
ceImageInstallableIndex Unsigned32,
ceImageInstallableType CeImageInstallableType,
ceImageInstallableName SnmpAdminString,
ceImageInstallableStatus CeImageInstallableStatus,
ceImageInstallableMajorVerNumber Unsigned32,
ceImageInstallableMinorVerNumber Unsigned32,
ceImageInstallableRevisionVerNum SnmpAdminString,
ceImageInstallableDate DateAndTime,
ceImageInstallableRowStatus RowStatus
}
ceImageInstallableIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer that uniquely identifies an installable.
It is allocated by the system and is unique per an
installable entry."
::= { ceImageInstallableEntry 1 }
ceImageInstallableType OBJECT-TYPE
SYNTAX CeImageInstallableType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the software package."
::= { ceImageInstallableEntry 2 }
ceImageInstallableName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of the installable."
::= { ceImageInstallableEntry 3 }
ceImageInstallableStatus OBJECT-TYPE
SYNTAX CeImageInstallableStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the software installable."
::= { ceImageInstallableEntry 4 }
ceImageInstallableMajorVerNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Major version number of the software installable.
Version is represented as major.minor.maintaince
For example, 12 will be major number for version
12.3(18.1)S"
::= { ceImageInstallableEntry 5 }
ceImageInstallableMinorVerNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minor version number of the software installable.
For example, minor number for the version 12.3(18.1)S
is 3."
::= { ceImageInstallableEntry 6 }
ceImageInstallableRevisionVerNum OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maintenance version string of the software installable.
This string represents incremental change in the image
over the minor release number. For example, revision
number for the version 12.3(18.1)S is (18.1)S.
"
::= { ceImageInstallableEntry 7 }
ceImageInstallableDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date and time software was installed
on the system."
::= { ceImageInstallableEntry 8 }
ceImageInstallableRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. This object is used to
manage creation, and deletion of rows in this table.
When the row is active, installablestatus object may be
modified to activate the installable.
"
::= { ceImageInstallableEntry 9 }
ceImageTagTable OBJECT-TYPE
SYNTAX SEQUENCE OF CeImageTagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A tag is a virtual label placed by user that indicates a
point deemed to be stable. It can be used to rollback to
a system after an install that negatively impacts the
functionality of the system. It gives point in system
where user can go back to, to remove installables
installed after that point of time.
When a tag is placed on an image an entry appears in
this table. An entry is removed from this table when
tag is removed from the system. The value of
ceImageLocationIndex is used as index to get all the tags
that are placed on the image at this location.
"
::= { ceImageTags 1 }
ceImageTagEntry OBJECT-TYPE
SYNTAX CeImageTagEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry consists of information about a committed tag.
"
INDEX {
entPhysicalIndex,
ceImageLocationIndex,
ceImageTagName
}
::= { ceImageTagTable 1 }
CeImageTagEntry ::= SEQUENCE {
ceImageTagName SnmpAdminString,
ceImageTagListofInstIndex SnmpAdminString,
ceImageTagDate DateAndTime,
ceImageTagRowStatus RowStatus
}
ceImageTagName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the tag."
::= { ceImageTagEntry 1 }
ceImageTagListofInstIndex OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"List of all the installables which are committed
using this tag. Installables are represented
using installable index and each index is saperated
by a space."
::= { ceImageTagEntry 2 }
ceImageTagDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date and time this tag was committed."
::= { ceImageTagEntry 3 }
ceImageTagRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. This object is used to
manage creation, and deletion of rows in this table.
"
::= { ceImageTagEntry 4 }
--
-- Conformance
--
ciscoEnhancedImageMIBConformance OBJECT IDENTIFIER
::= { ciscoEnhancedImageMIB 3 }
ciscoEnhancedImageMIBCompliances OBJECT IDENTIFIER
::= { ciscoEnhancedImageMIBConformance 1 }
ciscoEnhancedImageMIBGroups OBJECT IDENTIFIER
::= { ciscoEnhancedImageMIBConformance 2 }
--
-- Compliance
--
ciscoEnhancedImageMIBCompliance MODULE-COMPLIANCE
STATUS deprecated -- By
-- ceImageMibComplianceRev1
DESCRIPTION
"The compliance statement for entities which implement
the CISCO-ENHANCED-IMAGE-MIB."
MODULE -- this module
MANDATORY-GROUPS { ciscoEnhancedImageMIBGroup }
::= { ciscoEnhancedImageMIBCompliances 1 }
ceImageMIBComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the CISCO-ENHANCED-IMAGE-MIB."
MODULE -- this module
MANDATORY-GROUPS { ciscoEnhancedImageMIBGroup }
GROUP ceImageLocationMIBGroup
DESCRIPTION
"This group is optional.
Only applicable to modular operating systems.
This group provides information about locations where
images and installables are located on the system."
GROUP ceImageInstallableMIBGroup
DESCRIPTION
"This group is optional.
Only applicable to modular operating systems.
This group provides information about Installables
loaded on the systems and their current state."
GROUP ceImageTagMIBGroup
DESCRIPTION
"This group is optional.
Only applicable to modular operating systems.
This group provides information about tags committed on
the system and number of files committed under a tag."
::= { ciscoEnhancedImageMIBCompliances 2 }
--
-- Units of Conformance
--
ciscoEnhancedImageMIBGroup OBJECT-GROUP
OBJECTS {
ceImageName,
ceImageFamily,
ceImageFeature,
ceImageVersion,
ceImageMedia,
ceImageDescription
}
STATUS current
DESCRIPTION
"A collection of objects providing OS image
characteristics."
::= { ciscoEnhancedImageMIBGroups 1 }
ceImageLocationMIBGroup OBJECT-GROUP
OBJECTS {
ceImageLocation,
ceImageLocationRunningStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
location of Installable Images on the system."
::= { ciscoEnhancedImageMIBGroups 2 }
ceImageInstallableMIBGroup OBJECT-GROUP
OBJECTS {
ceImageInstallableType,
ceImageInstallableName,
ceImageInstallableStatus,
ceImageInstallableMajorVerNumber,
ceImageInstallableMinorVerNumber,
ceImageInstallableRevisionVerNum,
ceImageInstallableDate,
ceImageInstallableRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing
Operating system image and installables."
::= { ciscoEnhancedImageMIBGroups 3 }
ceImageTagMIBGroup OBJECT-GROUP
OBJECTS {
ceImageTagListofInstIndex,
ceImageTagDate,
ceImageTagRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
tags committed to the operating system image"
::= { ciscoEnhancedImageMIBGroups 4 }
END