Initial commit
This commit is contained in:
David Leutgeb
936
MIBS/cisco/CISCO-ERR-DISABLE-MIB
Normal file
936
MIBS/cisco/CISCO-ERR-DISABLE-MIB
Normal file
@ -0,0 +1,936 @@
|
||||
-- ****************************************************
|
||||
-- CISCO-ERR-DISABLE-MIB.my
|
||||
-- MIB support for the Error Disable feature
|
||||
--
|
||||
-- Copyright (c) 2006, 2008-2013, 2016 by Cisco Systems Inc.
|
||||
-- All rights reserved.
|
||||
--
|
||||
-- ****************************************************
|
||||
|
||||
CISCO-ERR-DISABLE-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
IMPORTS
|
||||
MODULE-IDENTITY,
|
||||
OBJECT-TYPE,
|
||||
NOTIFICATION-TYPE,
|
||||
Unsigned32
|
||||
FROM SNMPv2-SMI
|
||||
MODULE-COMPLIANCE,
|
||||
OBJECT-GROUP,
|
||||
NOTIFICATION-GROUP
|
||||
FROM SNMPv2-CONF
|
||||
ifIndex
|
||||
FROM IF-MIB
|
||||
TEXTUAL-CONVENTION,
|
||||
TruthValue
|
||||
FROM SNMPv2-TC
|
||||
TimeIntervalSec
|
||||
FROM CISCO-TC
|
||||
VlanIndexOrZero
|
||||
FROM CISCO-PRIVATE-VLAN-MIB
|
||||
ciscoMgmt
|
||||
FROM CISCO-SMI;
|
||||
|
||||
|
||||
ciscoErrDisableMIB MODULE-IDENTITY
|
||||
LAST-UPDATED "201606020000Z"
|
||||
ORGANIZATION "Cisco Systems, Inc."
|
||||
CONTACT-INFO
|
||||
"Cisco Systems
|
||||
Customer Service
|
||||
|
||||
Postal: 170 W Tasman Drive
|
||||
San Jose, CA 95134
|
||||
USA
|
||||
|
||||
Tel: +1 800 553-NETS
|
||||
|
||||
E-mail: cs-lan-switch-snmp@cisco.com"
|
||||
DESCRIPTION
|
||||
"This MIB module provides the ability for a Network
|
||||
Management Station (NMS) to configure and monitor the
|
||||
error-disable feature via SNMP.
|
||||
|
||||
The error-disable feature allows other software
|
||||
features running in a system to operationally disable a
|
||||
system entity upon detecting abnormal conditions.
|
||||
|
||||
Examples of such a system entity include interfaces, a
|
||||
vlan configured in the system, or a VLAN allowed on
|
||||
specific layer 2 multi-vlan interface.
|
||||
|
||||
More specific examples:
|
||||
|
||||
a) When BPDU guard is enabled on an interface
|
||||
it is expected that no BPDU packets are received by
|
||||
the interface. If a BPDU packet is received, then the
|
||||
BPDU guard will operationally disable the
|
||||
interface.
|
||||
|
||||
b) Users can configure a particular threshold of
|
||||
broadcast packets received on an interface. If the
|
||||
number of packets received exceeds the threshold, then
|
||||
storm-control will disable the interface.
|
||||
|
||||
c) When unidirectional Link Detection (UDLD) detects a
|
||||
unidirectional link on an interface, it can disable
|
||||
the interface.
|
||||
|
||||
d) On a trunk or a multi-vlan layer 2 port, if
|
||||
port-security detects violation on a particular vlan,
|
||||
then it can operationally disable that vlan on that
|
||||
port.
|
||||
|
||||
The definition of 'abnormal condition' is under the
|
||||
control of features that make use of the error-disable
|
||||
feature to disable system entities.
|
||||
|
||||
The error-disable feature supports the following
|
||||
configuration:
|
||||
|
||||
1) Whether software features can in fact use the
|
||||
error-disable feature upon detecting abnormal
|
||||
conditions.
|
||||
NOTE: Some software features will ALWAYS use the
|
||||
error-disable feature to disable entities upon
|
||||
detection of error.
|
||||
|
||||
2) Whether the system can attempt to automatically
|
||||
recover after a system entity has been disabled (e.g.,
|
||||
A system can attempt to bring up a physical interface
|
||||
which had been disabled earlier)
|
||||
|
||||
3) If error recovery is possible, then the time
|
||||
interval to wait before the system starts the recovery
|
||||
attempt."
|
||||
REVISION "201606020000Z"
|
||||
DESCRIPTION
|
||||
"Added the following new enumerations in
|
||||
CErrDisableFeatureID:
|
||||
other(36), portReinitLimitReached(37),
|
||||
adminRxBBCreditPerfBufIncomp(38), ficonNotEnabled(39),
|
||||
adminModeIncomp(40), adminSpeedIncomp(41), ncompAdminRxBBCredit(42),
|
||||
adminRxBufSizeIncomp(43), eppFailure(44), osmEPortUp(45),
|
||||
osmNonEPortUp(46), udldUniDir(47), udldTxRxLoop(48),
|
||||
udldNeighbourMismatch(49), udldEmptyEcho(50),
|
||||
udldAggrasiveModeLinkFailed(51), excessivePortInterrupts(52),
|
||||
channelErrDisabled(53), hwProgFailed(54),
|
||||
internalHandshakeFailed(55), stpInconsistencyOnVpcPeerLink(56),
|
||||
stpPortStateFailure(57), ipConflict(58),
|
||||
multipleMSapIdsRcvd(59), oneHundredPdusWithoutAck(60),
|
||||
and ipQosCompatCheckFailure(61)."
|
||||
REVISION "201304230000Z"
|
||||
DESCRIPTION
|
||||
"Added ciscoErrDisableFeatureFlapGroup and
|
||||
a new enumeration flapControl(4) in
|
||||
cErrDisableFeatureConfigurable."
|
||||
REVISION "201010190000Z"
|
||||
DESCRIPTION
|
||||
"Added a new enumeration in CErrDisableFeatureID:
|
||||
tranceiverIncomp(35)."
|
||||
REVISION "200903230000Z"
|
||||
DESCRIPTION
|
||||
"Added the following new enumerations in
|
||||
CErrDisableFeatureID:
|
||||
sfpConfigMismatch(24), communityLimit(25), invalidPolicy(26),
|
||||
lsGroup(27), ekey(28), portModeFailure(29),
|
||||
pppoeIaRateLimit(30), oamRemoteCriticalEvent(31),
|
||||
oamRemoteDyingGasp(32), oamRemoteLinkFault(33),
|
||||
and mvrp(34).
|
||||
|
||||
Added the new enumeration detectShutdownVlan(3)
|
||||
to cErrDisableFeatureConfigurable.
|
||||
|
||||
Added ciscoErrDisableShutdownVlanGroup."
|
||||
REVISION "200804070000Z"
|
||||
DESCRIPTION
|
||||
"Added the following new enumerations in
|
||||
CErrDisableFeatureID:
|
||||
packetBuffer(18), macLimit(19), linkMonitorFailure(20),
|
||||
oamRemoteFailure(21), dot1adIncompEtype(22), and
|
||||
dot1adIncompTunnel(23).
|
||||
|
||||
cErrDisableInterfaceEvent notification is deprecated
|
||||
and replaced by a new notification
|
||||
cErrDisableInterfaceEventRev1.
|
||||
|
||||
Modified the description of cErrDisableNotifEnable
|
||||
to add control for cErrDisableInterfaceEventRev1
|
||||
notification."
|
||||
REVISION "200605310000Z"
|
||||
DESCRIPTION
|
||||
"Initial version of this MIB module."
|
||||
::= { ciscoMgmt 548 }
|
||||
|
||||
|
||||
ciscoErrDisableMIBNotifs OBJECT IDENTIFIER
|
||||
::= { ciscoErrDisableMIB 0 }
|
||||
|
||||
ciscoErrDisableMIBObjects OBJECT IDENTIFIER
|
||||
::= { ciscoErrDisableMIB 1 }
|
||||
|
||||
ciscoErrDisableMIBConform OBJECT IDENTIFIER
|
||||
::= { ciscoErrDisableMIB 2 }
|
||||
|
||||
cErrDisableGlobalObjects OBJECT IDENTIFIER
|
||||
::= { ciscoErrDisableMIBObjects 1 }
|
||||
|
||||
cErrDisableFeatureObjects OBJECT IDENTIFIER
|
||||
::= { ciscoErrDisableMIBObjects 2 }
|
||||
|
||||
cErrDisableIfObjects OBJECT IDENTIFIER
|
||||
::= { ciscoErrDisableMIBObjects 3 }
|
||||
|
||||
|
||||
-- Textual Conventions
|
||||
|
||||
CErrDisableFeatureID ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An integer-value assigned to various features/events
|
||||
that can error disable a system entity
|
||||
|
||||
udld: Unidirectional Link Detection
|
||||
|
||||
bpduGuard: Spanning Tree BPDU Guard feature that prevents
|
||||
processing BPDU packets on an access interface
|
||||
|
||||
channelMisconfig: General Link Aggregation mis-configuration
|
||||
|
||||
pagpFlap: Cisco's PAGP Link Aggregation protocol errors
|
||||
|
||||
dtpFlap: Dynamic Trunking Protocol errors
|
||||
|
||||
linkFlap: Link State flapping
|
||||
|
||||
l2ptGuard: L2 Protocol Tunnel errors
|
||||
|
||||
dot1xSecurityViolation: 802.1x authentication violations
|
||||
|
||||
portSecurity: Port Security violations
|
||||
|
||||
gbicInvalid: Invalid GBIC errors (examples include
|
||||
unsupported GBIC being inserted)
|
||||
|
||||
dhcpRateLimit: DHCP snooping rate limit violation
|
||||
|
||||
unicastFlood: Unicast Flooding threshold violations
|
||||
|
||||
vmps: VLAN Membership Policy Server feature related errors
|
||||
|
||||
stormControl: storm control (broadcast/multicast/unicast)
|
||||
threshold violations
|
||||
|
||||
inlinePower: Errors in inline power
|
||||
|
||||
arpInspection: Errors detected by Dynamic Arp Inspection
|
||||
(DAI) feature
|
||||
|
||||
portLoopback: Interface Loopback Error
|
||||
|
||||
packetBuffer: Packet Buffer Error
|
||||
|
||||
macLimit: Errors detected by Mac Address Limit feature
|
||||
|
||||
linkMonitorFailure: Link Monitoring failure
|
||||
|
||||
oamRemoteFailure: Remote Failure detected by Ethernet OAM
|
||||
(Operations, Administration, and Maintenance) feature
|
||||
|
||||
dot1adIncompEtype: 802.1ad Ether-type Incompatible errors
|
||||
|
||||
dot1adIncompTunnel: 802.1ad Pdu Tunnel Incompatible errors
|
||||
|
||||
sfpConfigMismatch: Mismatch on SFP configuration
|
||||
|
||||
communityLimit: Vlan Community Limit violations
|
||||
|
||||
invalidPolicy: QoS Policy violation
|
||||
|
||||
lsGroup: Errors detected by Link State Group Tracking feature
|
||||
|
||||
ekey: Errors detected by Error Key Mechanism
|
||||
|
||||
portModeFailure: Port mode change failure
|
||||
|
||||
pppoeIaRateLimit: Errors detected by PPPoE Intermediate Agent
|
||||
Rate Limit feature
|
||||
|
||||
oamRemoteCriticalEvent: Ethernet OAM Remote Critical Event
|
||||
Failure
|
||||
|
||||
oamRemoteDyingGasp: Ethernet OAM Remote Dying Gasp Failure
|
||||
|
||||
oamRemoteLinkFault: Ethernet OAM Remote Link Fault Failure
|
||||
|
||||
mvrp: Errors detected by Multiple VLAN Registration Protocol
|
||||
|
||||
tranceiverIncomp: Tranceiver incompatible errors
|
||||
|
||||
other: Any other feature not covered by enumerations listed here
|
||||
|
||||
portReinitLimitReached: Port reinitialization limit reached
|
||||
|
||||
adminRxBBCreditPerfBufIncomp: Incompatible admin port rxbbcredit performance buffers
|
||||
|
||||
ficonNotEnabled: Ficon not enabled
|
||||
|
||||
adminModeIncomp: Incompatible port admin mode
|
||||
|
||||
adminSpeedIncomp: Incompatible port admin speed
|
||||
|
||||
adminRxBBCreditIncomp: Incompatible admin port rxbbcredit
|
||||
|
||||
adminRxBufSizeIncomp: Incompatible admin port rxbufsize
|
||||
|
||||
eppFailure: EPP Failure
|
||||
|
||||
osmEPortUp: First interface in this group is E
|
||||
|
||||
osmNonEPortUp: Other interfaces in this group are not shut
|
||||
|
||||
udldUniDir: Unidirectional UDLD detected
|
||||
|
||||
udldTxRxLoop: UDLD Tx-Rx loop
|
||||
|
||||
udldNeighbourMismatch: UDLD neighbor mismatch
|
||||
|
||||
udldEmptyEcho: UDLD empty echo
|
||||
|
||||
udldAggrasiveModeLinkFailed: UDLD detected link failure in aggressive mode
|
||||
|
||||
excessivePortInterrupts: Error disabled due to excessive port interrupts
|
||||
|
||||
channelErrDisabled: Channel error-disabled
|
||||
|
||||
hwProgFailed: hardware programming failed
|
||||
|
||||
internalHandshakeFailed: Internal handshake failure
|
||||
|
||||
stpInconsistencyOnVpcPeerLink: STP inconsistency on VPC peer-link
|
||||
|
||||
stpPortStateFailure: STP has set port state to failure
|
||||
|
||||
ipConflict: Error disabled due to IP address conflict
|
||||
|
||||
multipleMSapIdsRcvd: DCX Multiple MSAP IDs recieved for the port
|
||||
|
||||
oneHundredPdusWithoutAck: DCX Recieved 100 PDUs without ACK
|
||||
|
||||
ipQosCompatCheckFailure: IP Qos DCBXP compat check failed"
|
||||
SYNTAX INTEGER {
|
||||
udld(1),
|
||||
bpduGuard(2),
|
||||
channelMisconfig(3),
|
||||
pagpFlap(4),
|
||||
dtpFlap(5),
|
||||
linkFlap(6),
|
||||
l2ptGuard(7),
|
||||
dot1xSecurityViolation(8),
|
||||
portSecurityViolation(9),
|
||||
gbicInvalid(10),
|
||||
dhcpRateLimit(11),
|
||||
unicastFlood(12),
|
||||
vmps(13),
|
||||
stormControl(14),
|
||||
inlinePower(15),
|
||||
arpInspection(16),
|
||||
portLoopback(17),
|
||||
packetBuffer(18),
|
||||
macLimit(19),
|
||||
linkMonitorFailure(20),
|
||||
oamRemoteFailure(21),
|
||||
dot1adIncompEtype(22),
|
||||
dot1adIncompTunnel(23),
|
||||
sfpConfigMismatch(24),
|
||||
communityLimit(25),
|
||||
invalidPolicy(26),
|
||||
lsGroup(27),
|
||||
ekey(28),
|
||||
portModeFailure(29),
|
||||
pppoeIaRateLimit(30),
|
||||
oamRemoteCriticalEvent(31),
|
||||
oamRemoteDyingGasp(32),
|
||||
oamRemoteLinkFault(33),
|
||||
mvrp(34),
|
||||
tranceiverIncomp(35),
|
||||
other(36),
|
||||
portReinitLimitReached(37),
|
||||
adminRxBBCreditPerfBufIncomp(38),
|
||||
ficonNotEnabled(39),
|
||||
adminModeIncomp(40),
|
||||
adminSpeedIncomp(41),
|
||||
adminRxBBCreditIncomp(42),
|
||||
adminRxBufSizeIncomp(43),
|
||||
eppFailure(44),
|
||||
osmEPortUp(45),
|
||||
osmNonEPortUp(46),
|
||||
udldUniDir(47),
|
||||
udldTxRxLoop(48),
|
||||
udldNeighbourMismatch(49),
|
||||
udldEmptyEcho(50),
|
||||
udldAggrasiveModeLinkFailed(51),
|
||||
excessivePortInterrupts(52),
|
||||
channelErrDisabled(53),
|
||||
hwProgFailed(54),
|
||||
internalHandshakeFailed(55),
|
||||
stpInconsistencyOnVpcPeerLink(56),
|
||||
stpPortStateFailure(57),
|
||||
ipConflict(58),
|
||||
multipleMSapIdsRcvd(59),
|
||||
oneHundredPdusWithoutAck(60),
|
||||
ipQosCompatCheckFailure(61)
|
||||
}
|
||||
|
||||
-- Global configuration objects
|
||||
|
||||
cErrDisableRecoveryInterval OBJECT-TYPE
|
||||
SYNTAX TimeIntervalSec
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies the error-disable recovery time
|
||||
interval.
|
||||
When a system entity is operationally disabled upon
|
||||
detecting abnormal condition by a particular feature,
|
||||
the system waits for a period equal to this time interval,
|
||||
and then re-enable the entity if automatic recovery is
|
||||
enabled for the feature."
|
||||
::= { cErrDisableGlobalObjects 1 }
|
||||
|
||||
cErrDisableNotifEnable OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies whether cErrDisableInterfaceEvent
|
||||
and cErrDisableInterfaceEventRev1
|
||||
notifications should be generated when a system entity is
|
||||
error-disabled."
|
||||
::= { cErrDisableGlobalObjects 2 }
|
||||
|
||||
cErrDisableNotifRate OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
UNITS "Notification/Minute"
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The value of this object specifies the maximum number of
|
||||
error-disable notifications the device will generate per
|
||||
minute.
|
||||
|
||||
A value of '0' specifies no limit and the device
|
||||
will generate a notification for each error-disable
|
||||
event."
|
||||
::= { cErrDisableGlobalObjects 3 }
|
||||
|
||||
cErrDisableFeatureTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF CErrDisableFeatureEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table contains the error-disable related info
|
||||
for each feature employing the error-disable
|
||||
feature."
|
||||
::= { cErrDisableFeatureObjects 1 }
|
||||
|
||||
cErrDisableFeatureEntry OBJECT-TYPE
|
||||
SYNTAX CErrDisableFeatureEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An entry is created for each feature that employs the
|
||||
error-disable feature."
|
||||
INDEX { cErrDisableFeatureIndex }
|
||||
::= { cErrDisableFeatureTable 1 }
|
||||
|
||||
CErrDisableFeatureEntry ::= SEQUENCE {
|
||||
cErrDisableFeatureIndex CErrDisableFeatureID,
|
||||
cErrDisableFeatureConfigurable BITS,
|
||||
cErrDisableFeatureDetectEnable TruthValue,
|
||||
cErrDisableFeatureRecoveryEnable TruthValue,
|
||||
cErrDisableFeatureRecoveryInterval TimeIntervalSec,
|
||||
cErrDisableFeatureDetectShutdownVlan TruthValue,
|
||||
cErrDisableFeatureMaxFlapCount Unsigned32,
|
||||
cErrDisableFeatureFlapTimePeriod Unsigned32
|
||||
}
|
||||
|
||||
cErrDisableFeatureIndex OBJECT-TYPE
|
||||
SYNTAX CErrDisableFeatureID
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object uniquely identifies a feature that makes
|
||||
use of the error-disable feature."
|
||||
::= { cErrDisableFeatureEntry 1 }
|
||||
|
||||
cErrDisableFeatureConfigurable OBJECT-TYPE
|
||||
SYNTAX BITS {
|
||||
detectionEnable(0),
|
||||
recoveryEnable(1),
|
||||
recoveryInterval(2),
|
||||
detectShutdownVlan(3),
|
||||
flapControl(4)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates whether the error-disable related
|
||||
configuration is configurable for this feature. If a bit
|
||||
is set to 1, then the corresponding error-disable
|
||||
configuration can be configured.
|
||||
|
||||
'detectionEnable' - indicates the error-disable detection
|
||||
can be enabled/disabled for this feature
|
||||
via cErrDisableFeatureDetectEnable.
|
||||
'recoveryEnable' - indicates the error-disable recovery
|
||||
can be enabled/disabled for this feature
|
||||
via cErrDisableFeatureRecoveryEnable.
|
||||
'recoveryInterval' - indicates the error-disable recovery
|
||||
Interval can be configured via
|
||||
cErrDisableFeatureRecoveryInterval.
|
||||
'detectShutdownVlan' - indicates the error-disable detection
|
||||
shutdown vlan mode can be configured for
|
||||
this feature via
|
||||
cErrDisableFeatureDetectShutdownVlan.
|
||||
'flapControl' - indicates the error-disable flap control
|
||||
can be configured via
|
||||
cErrDisableFeatureMaxFlapCount and
|
||||
cErrDisableFeatureFlapTimePeriod."
|
||||
::= { cErrDisableFeatureEntry 2 }
|
||||
|
||||
cErrDisableFeatureDetectEnable OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies whether the error-disable detection
|
||||
is enabled for the feature.
|
||||
|
||||
Note:
|
||||
This object is read-write only for those features
|
||||
that are configurable, meaning:
|
||||
cErrDisableFeatureConfigurable.<featureIndex> has the
|
||||
first bit set to 1."
|
||||
::= { cErrDisableFeatureEntry 3 }
|
||||
|
||||
cErrDisableFeatureRecoveryEnable OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies whether the system can
|
||||
automatically recover a system entity that has been
|
||||
disabled by the feature."
|
||||
::= { cErrDisableFeatureEntry 4 }
|
||||
|
||||
cErrDisableFeatureRecoveryInterval OBJECT-TYPE
|
||||
SYNTAX TimeIntervalSec
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies the error-recovery time interval
|
||||
that will be used by the system for any system entity that
|
||||
is error-disabled by this particular feature.
|
||||
|
||||
If the value of this object is '0', then the device will
|
||||
use the value specified by the global configuration object
|
||||
cErrDisableRecoveryInterval."
|
||||
::= { cErrDisableFeatureEntry 5 }
|
||||
|
||||
cErrDisableFeatureDetectShutdownVlan OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies whether shutting down the violating
|
||||
VLAN on an interface is enabled or not. The value of 'true'
|
||||
indicates that shutting down the violating VLAN on an
|
||||
interface is enabled. The value of 'false' indicates that
|
||||
shutting down the violating VLAN on an interface is
|
||||
disabled."
|
||||
::= { cErrDisableFeatureEntry 6 }
|
||||
|
||||
cErrDisableFeatureMaxFlapCount OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies the maximum number of flaps that
|
||||
are allowed to occur before setting to error disable state.
|
||||
A read-only value of zero indicates that no flap control
|
||||
is present."
|
||||
::= { cErrDisableFeatureEntry 7 }
|
||||
|
||||
cErrDisableFeatureFlapTimePeriod OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies the period of time counting the number of
|
||||
flaps that are allowed before setting to error disable state.
|
||||
A read-only value of zero indicates that no flap control
|
||||
is present."
|
||||
::= { cErrDisableFeatureEntry 8 }
|
||||
|
||||
|
||||
|
||||
cErrDisableIfStatusTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF CErrDisableIfStatusEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table provides interface (port) specific
|
||||
error-disable status information. Each conceptual row
|
||||
provides status information about a {interface, vlan}
|
||||
disabled by a feature.
|
||||
|
||||
On a trunk or multi-vlan access interface, a given vlan on
|
||||
the interface can be error-disabled. In this case, the row is
|
||||
indexed by the ifIndex for the interface and the vlan
|
||||
index corresponding to the vlan in question.
|
||||
|
||||
If the interface is carrying only 1 vlan or the entire
|
||||
trunk interface is error-disabled (due to link flaps, for
|
||||
example) then the vlan index portion of the row index is
|
||||
0."
|
||||
::= { cErrDisableIfObjects 1 }
|
||||
|
||||
cErrDisableIfStatusEntry OBJECT-TYPE
|
||||
SYNTAX CErrDisableIfStatusEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of objects that specify the status of an
|
||||
error-disabled Interface or {interface, vlan}."
|
||||
INDEX {
|
||||
ifIndex,
|
||||
cErrDisableIfStatusVlanIndex
|
||||
}
|
||||
::= { cErrDisableIfStatusTable 1 }
|
||||
|
||||
CErrDisableIfStatusEntry ::= SEQUENCE {
|
||||
cErrDisableIfStatusVlanIndex VlanIndexOrZero,
|
||||
cErrDisableIfStatusCause CErrDisableFeatureID,
|
||||
cErrDisableIfStatusTimeToRecover TimeIntervalSec
|
||||
}
|
||||
|
||||
cErrDisableIfStatusVlanIndex OBJECT-TYPE
|
||||
SYNTAX VlanIndexOrZero
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies the vlan of the given interface
|
||||
that has been error-disabled. If the physical interface is
|
||||
error-disabled then the value of this object is 0."
|
||||
::= { cErrDisableIfStatusEntry 1 }
|
||||
|
||||
cErrDisableIfStatusCause OBJECT-TYPE
|
||||
SYNTAX CErrDisableFeatureID
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies the feature/event that caused the
|
||||
{interface, vlan} (or the entire interface) to be
|
||||
error-disabled."
|
||||
::= { cErrDisableIfStatusEntry 2 }
|
||||
|
||||
cErrDisableIfStatusTimeToRecover OBJECT-TYPE
|
||||
SYNTAX TimeIntervalSec
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Time left before the system attempts an automatic
|
||||
recovery of the interface or the vlan of the given
|
||||
interface. If no recovery is scheduled, then the value
|
||||
of this object is '0'."
|
||||
::= { cErrDisableIfStatusEntry 3 }
|
||||
|
||||
|
||||
-- Notifications
|
||||
|
||||
cErrDisableNotificationsPrefix OBJECT IDENTIFIER
|
||||
::= { ciscoErrDisableMIBNotifs 1 }
|
||||
|
||||
|
||||
cErrDisableInterfaceEvent NOTIFICATION-TYPE
|
||||
OBJECTS { cErrDisableIfStatusCause }
|
||||
STATUS deprecated
|
||||
DESCRIPTION
|
||||
"The cErrDisableInterfaceEvent is generated when an interface
|
||||
or {interface, vlan} is error-disabled by the feature
|
||||
specified in cErrDisableIfStatusCause.
|
||||
|
||||
cErrDisableInterfaceEvent is deprecated and replaced by
|
||||
cErrDisableInterfaceEventRev1."
|
||||
::= { cErrDisableNotificationsPrefix 1 }
|
||||
|
||||
cErrDisableInterfaceEventRev1 NOTIFICATION-TYPE
|
||||
OBJECTS { cErrDisableIfStatusCause }
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The cErrDisableInterfaceEventRev1 is generated when an
|
||||
interface or {interface, vlan} is error-disabled by the
|
||||
feature specified in cErrDisableIfStatusCause.
|
||||
|
||||
cErrDisableInterfaceEventRev1 deprecates
|
||||
cErrDisableInterfaceEvent to make it RFC 2578 compliant.
|
||||
According to section 8.5 of RFC 2578, the next
|
||||
to last sub-identifier in the name of any newly-defined
|
||||
notification must have the value zero."
|
||||
::= { ciscoErrDisableMIBNotifs 2 }
|
||||
-- MIB Conformance statements
|
||||
|
||||
ciscoErrDisableMIBCompliances OBJECT IDENTIFIER
|
||||
::= { ciscoErrDisableMIBConform 1 }
|
||||
|
||||
ciscoErrDisableMIBGroups OBJECT IDENTIFIER
|
||||
::= { ciscoErrDisableMIBConform 2 }
|
||||
|
||||
|
||||
ciscoErrDisableMIBCompliance MODULE-COMPLIANCE
|
||||
STATUS deprecated
|
||||
DESCRIPTION
|
||||
"The compliance statement for the cisco errdisable MIB."
|
||||
MODULE -- this module
|
||||
MANDATORY-GROUPS {
|
||||
ciscoErrDisableGlobalCfgGroup,
|
||||
ciscoErrDisableFeatureCfgGroup,
|
||||
ciscoErrDisableIfStatusGroup
|
||||
}
|
||||
|
||||
GROUP ciscoErrDisableNotifCfgGroup
|
||||
DESCRIPTION
|
||||
"This group is mandatory if the managed system
|
||||
supports notifications for error-disable events."
|
||||
|
||||
GROUP ciscoErrDisableNotifGroup
|
||||
DESCRIPTION
|
||||
"This group is mandatory if the managed system
|
||||
supports notifications for error-disable events."
|
||||
::= { ciscoErrDisableMIBCompliances 1 }
|
||||
|
||||
ciscoErrDisableMIBComplianceRev1 MODULE-COMPLIANCE
|
||||
STATUS deprecated
|
||||
DESCRIPTION
|
||||
"The compliance statement for the cisco errdisable MIB."
|
||||
MODULE -- this module
|
||||
MANDATORY-GROUPS {
|
||||
ciscoErrDisableGlobalCfgGroup,
|
||||
ciscoErrDisableFeatureCfgGroup,
|
||||
ciscoErrDisableIfStatusGroup
|
||||
}
|
||||
|
||||
GROUP ciscoErrDisableNotifCfgGroup
|
||||
DESCRIPTION
|
||||
"This group is mandatory if the managed system
|
||||
supports notifications for error-disable events."
|
||||
|
||||
GROUP ciscoErrDisableNotifGroupRev1
|
||||
DESCRIPTION
|
||||
"This group is mandatory if the managed system
|
||||
supports notifications for error-disable events."
|
||||
|
||||
GROUP ciscoErrDisableShutdownVlanGroup
|
||||
DESCRIPTION
|
||||
"This group is mandatory if the managed system
|
||||
supports the configuration on error-disable
|
||||
detection shutdown vlan mode."
|
||||
|
||||
OBJECT cErrDisableRecoveryInterval
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION
|
||||
"Write access is not required."
|
||||
|
||||
OBJECT cErrDisableNotifEnable
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION
|
||||
"Write access is not required."
|
||||
|
||||
OBJECT cErrDisableNotifRate
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION
|
||||
"Write access is not required."
|
||||
|
||||
OBJECT cErrDisableFeatureDetectEnable
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION
|
||||
"Write access is not required."
|
||||
|
||||
OBJECT cErrDisableFeatureRecoveryEnable
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION
|
||||
"Write access is not required."
|
||||
|
||||
OBJECT cErrDisableFeatureRecoveryInterval
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION
|
||||
"Write access is not required."
|
||||
|
||||
OBJECT cErrDisableFeatureDetectShutdownVlan
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION
|
||||
"Write access is not required."
|
||||
::= { ciscoErrDisableMIBCompliances 2 }
|
||||
|
||||
ciscoErrDisableMIBComplianceRev2 MODULE-COMPLIANCE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The compliance statement for the cisco errdisable MIB."
|
||||
MODULE -- this module
|
||||
MANDATORY-GROUPS {
|
||||
ciscoErrDisableGlobalCfgGroup,
|
||||
ciscoErrDisableFeatureCfgGroup,
|
||||
ciscoErrDisableIfStatusGroup
|
||||
}
|
||||
|
||||
GROUP ciscoErrDisableNotifCfgGroup
|
||||
DESCRIPTION
|
||||
"This group is mandatory if the managed system
|
||||
supports notifications for error-disable events."
|
||||
|
||||
GROUP ciscoErrDisableNotifGroupRev1
|
||||
DESCRIPTION
|
||||
"This group is mandatory if the managed system
|
||||
supports notifications for error-disable events."
|
||||
|
||||
GROUP ciscoErrDisableShutdownVlanGroup
|
||||
DESCRIPTION
|
||||
"This group is mandatory if the managed system
|
||||
supports the configuration on error-disable
|
||||
detection shutdown vlan mode."
|
||||
|
||||
GROUP ciscoErrDisableFeatureFlapGroup
|
||||
DESCRIPTION
|
||||
"This group is mandatory if the managed system
|
||||
supports the configuration on error-disable
|
||||
flap control."
|
||||
|
||||
OBJECT cErrDisableRecoveryInterval
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION
|
||||
"Write access is not required."
|
||||
|
||||
OBJECT cErrDisableNotifEnable
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION
|
||||
"Write access is not required."
|
||||
|
||||
OBJECT cErrDisableNotifRate
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION
|
||||
"Write access is not required."
|
||||
|
||||
OBJECT cErrDisableFeatureDetectEnable
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION
|
||||
"Write access is not required."
|
||||
|
||||
OBJECT cErrDisableFeatureRecoveryEnable
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION
|
||||
"Write access is not required."
|
||||
|
||||
OBJECT cErrDisableFeatureRecoveryInterval
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION
|
||||
"Write access is not required."
|
||||
|
||||
OBJECT cErrDisableFeatureDetectShutdownVlan
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION
|
||||
"Write access is not required."
|
||||
|
||||
OBJECT cErrDisableFeatureMaxFlapCount
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION
|
||||
"Write access is not required."
|
||||
|
||||
OBJECT cErrDisableFeatureFlapTimePeriod
|
||||
MIN-ACCESS read-only
|
||||
DESCRIPTION
|
||||
"Write access is not required."
|
||||
::= { ciscoErrDisableMIBCompliances 3 }
|
||||
|
||||
-- Object groups
|
||||
|
||||
ciscoErrDisableGlobalCfgGroup OBJECT-GROUP
|
||||
OBJECTS { cErrDisableRecoveryInterval }
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of objects to configure error-disable
|
||||
functionality."
|
||||
::= { ciscoErrDisableMIBGroups 1 }
|
||||
|
||||
ciscoErrDisableFeatureCfgGroup OBJECT-GROUP
|
||||
OBJECTS {
|
||||
cErrDisableFeatureConfigurable,
|
||||
cErrDisableFeatureDetectEnable,
|
||||
cErrDisableFeatureRecoveryEnable,
|
||||
cErrDisableFeatureRecoveryInterval
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of objects to manage the configuration of
|
||||
the error-disable feature."
|
||||
::= { ciscoErrDisableMIBGroups 2 }
|
||||
|
||||
ciscoErrDisableIfStatusGroup OBJECT-GROUP
|
||||
OBJECTS {
|
||||
cErrDisableIfStatusCause,
|
||||
cErrDisableIfStatusTimeToRecover
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of error-disable interface status objects."
|
||||
::= { ciscoErrDisableMIBGroups 3 }
|
||||
|
||||
ciscoErrDisableNotifCfgGroup OBJECT-GROUP
|
||||
OBJECTS {
|
||||
cErrDisableNotifEnable,
|
||||
cErrDisableNotifRate
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of objects to configure error-disable
|
||||
notifications."
|
||||
::= { ciscoErrDisableMIBGroups 4 }
|
||||
|
||||
ciscoErrDisableNotifGroup NOTIFICATION-GROUP
|
||||
NOTIFICATIONS { cErrDisableInterfaceEvent }
|
||||
STATUS deprecated
|
||||
DESCRIPTION
|
||||
"A collection of error-disable notification objects."
|
||||
::= { ciscoErrDisableMIBGroups 5 }
|
||||
|
||||
ciscoErrDisableNotifGroupRev1 NOTIFICATION-GROUP
|
||||
NOTIFICATIONS { cErrDisableInterfaceEventRev1 }
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of error-disable notification objects."
|
||||
::= { ciscoErrDisableMIBGroups 6 }
|
||||
|
||||
ciscoErrDisableShutdownVlanGroup OBJECT-GROUP
|
||||
OBJECTS { cErrDisableFeatureDetectShutdownVlan }
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of objects to manage the configuration of
|
||||
error-disable detection shutdown vlan mode."
|
||||
::= { ciscoErrDisableMIBGroups 7 }
|
||||
|
||||
ciscoErrDisableFeatureFlapGroup OBJECT-GROUP
|
||||
OBJECTS {
|
||||
cErrDisableFeatureMaxFlapCount,
|
||||
cErrDisableFeatureFlapTimePeriod
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of objects to manage the configuration of
|
||||
the error-disable flap control."
|
||||
::= { ciscoErrDisableMIBGroups 8 }
|
||||
|
||||
END
|
||||
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user