Initial commit
This commit is contained in:
David Leutgeb
573
MIBS/enterasys/CTRON-PRIORITY-EXTENSIONS-MIB
Normal file
573
MIBS/enterasys/CTRON-PRIORITY-EXTENSIONS-MIB
Normal file
@ -0,0 +1,573 @@
|
||||
CTRON-PRIORITY-EXTENSIONS-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
-- ctron-priority-extensions-mib.txt
|
||||
-- Revision: 01.01.02
|
||||
-- Part Number:
|
||||
-- Date: February 17, 1997
|
||||
|
||||
|
||||
-- Cabletron Systems, Inc.
|
||||
-- 35 Industrial Way, P.O. Box 5005
|
||||
-- Rochester, NH 03867-0505
|
||||
-- (603) 332-9400
|
||||
-- support@ctron.com
|
||||
|
||||
-- This module provides authoritative definitions for Cabletron's
|
||||
-- enterprise-specific priority extensions MIB.
|
||||
--
|
||||
-- This module will be extended, as required.
|
||||
--
|
||||
|
||||
-- Cabletron Systems reserves the right to make changes in
|
||||
-- specification and other information contained in this document
|
||||
-- without prior notice. The reader should consult Cabletron Systems
|
||||
-- to determine whether any such changes have been made.
|
||||
--
|
||||
-- In no event shall Cabletron Systems be liable for any incidental,
|
||||
-- indirect, special, or consequential damages whatsoever (including
|
||||
-- but not limited to lost profits) arising out of or related to this
|
||||
-- document or the information contained in it, even if Cabletron
|
||||
-- Systems has been advised of, known, or should have known, the
|
||||
-- possibility of such damages.
|
||||
--
|
||||
-- Cabletron grants vendors, end-users, and other interested parties
|
||||
-- a non-exclusive license to use this Specification in connection
|
||||
-- with the management of Cabletron products.
|
||||
|
||||
-- Copyright December 1997 Cabletron Systems
|
||||
|
||||
IMPORTS
|
||||
OBJECT-TYPE
|
||||
FROM RFC-1212
|
||||
PhysAddress
|
||||
FROM RFC1213-MIB
|
||||
ctPriorityExt
|
||||
FROM CTRON-MIB-NAMES;
|
||||
|
||||
-- PhysAddress ::= OCTET STRING
|
||||
|
||||
-- The ctPriorityExt MIB is used to control priority packet forwarding.
|
||||
-- Priority packet forwarding provides the ability to designate certain
|
||||
-- packets to be of higher importance than others. This control allows
|
||||
-- for the forwarding of higher priority packets before those of lower priority.
|
||||
-- This functionality is essential for time critical applications on
|
||||
-- shared networks.
|
||||
|
||||
|
||||
|
||||
ctPriorityExtTxQueue OBJECT IDENTIFIER
|
||||
::= { ctPriorityExt 1 }
|
||||
|
||||
-- The ctPriorityExtTxQueue group specifies the number of
|
||||
-- transmit queues supported for each physical interface on the device.
|
||||
-- Which transmit queue a packet is placed on will be determined by
|
||||
-- associating each priority level (0-7) with a particular transmit
|
||||
-- queue. Specifically the priority mappings will be as follows:
|
||||
--
|
||||
-- +=====================================+
|
||||
-- |Priority | Number of Transmit Queues |
|
||||
-- | Level ========================+===|
|
||||
-- | | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|
||||
-- |=========+===+===+===+===+===+===+===|
|
||||
-- | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
|
||||
-- +=========+===+===+===+===+===+===+===| O T
|
||||
-- | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | u X
|
||||
-- +=========+===+===+===+===+===+===+===| t
|
||||
-- | 2 | 1 | 1 | 1 | 1 | 1 | 1 | 2 | b Q
|
||||
-- +=========+===+===+===+===+===+===+===| o u
|
||||
-- | 3 | 1 | 1 | 1 | 2 | 2 | 2 | 3 | u e
|
||||
-- +=========+===+===+===+===+===+===+===| n u
|
||||
-- | 4 | 1 | 1 | 2 | 2 | 3 | 3 | 4 | d e
|
||||
-- +=========+===+===+===+===+===+===+===|
|
||||
-- | 5 | 1 | 1 | 2 | 3 | 4 | 4 | 5 |
|
||||
-- +=========+===+===+===+===+===+===+===|
|
||||
-- | 6 | 1 | 1 | 2 | 3 | 4 | 5 | 6 |
|
||||
-- +=========+===+===+===+===+===+===+===|
|
||||
-- | 7 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|
||||
-- +=========+===+===+===+===+===+===+===|
|
||||
--
|
||||
--
|
||||
-- The implementation of this group is MANDANTORY.
|
||||
|
||||
|
||||
ctPriorityExtTXQueueTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF CtPriorityExtTXQueueEntry
|
||||
ACCESS not-accessible
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"This table provides information pertaining to the number
|
||||
of physical transmit queues per interface."
|
||||
::= { ctPriorityExtTxQueue 1 }
|
||||
|
||||
|
||||
ctPriorityExtTXQueueEntry OBJECT-TYPE
|
||||
SYNTAX CtPriorityExtTXQueueEntry
|
||||
ACCESS not-accessible
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"Specifies the number of transmit queues for this interface."
|
||||
INDEX { ctPriorityExtSlotNum, ctPriorityExtInterfaceNum }
|
||||
::= { ctPriorityExtTXQueueTable 1 }
|
||||
|
||||
|
||||
CtPriorityExtTXQueueEntry ::= SEQUENCE {
|
||||
ctPriorityExtSlotNum
|
||||
INTEGER,
|
||||
ctPriorityExtInterfaceNum
|
||||
INTEGER,
|
||||
ctPriorityExtNumTXQueues
|
||||
INTEGER
|
||||
}
|
||||
|
||||
ctPriorityExtSlotNum OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
ACCESS read-only
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"The slot num of the device that the interface is located on."
|
||||
::= { ctPriorityExtTXQueueEntry 1 }
|
||||
|
||||
ctPriorityExtInterfaceNum OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
ACCESS read-only
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"The interface number for which the information is requested.
|
||||
This is equal to the MIB-II ifIndex."
|
||||
::= { ctPriorityExtTXQueueEntry 2 }
|
||||
|
||||
ctPriorityExtNumTXQueues OBJECT-TYPE
|
||||
SYNTAX INTEGER (1..8)
|
||||
ACCESS read-only
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"The number of physical transmit queues for the requested interface."
|
||||
::= { ctPriorityExtTXQueueEntry 3 }
|
||||
|
||||
|
||||
ctPriorityExtMACConfig OBJECT IDENTIFIER ::= { ctPriorityExt 2 }
|
||||
|
||||
-- The control is defined by creating a row in the ctPriorityExtMacTable
|
||||
-- specifying the MAC address, address type, packet type, and VLAN ID
|
||||
-- with ctPriorityExtMACPriority set to a value in the range of 1 to 8.
|
||||
-- When an entry is made in the aforementioned table all packets
|
||||
-- matching those criteria will be forwarded with the specifed priority.
|
||||
-- Additionally any ports that support IEEE 802.1p and 802.1q frame tagging
|
||||
-- will encode the priority in the frame tag of the packet.
|
||||
-- The implementation of this group is optional.
|
||||
|
||||
|
||||
ctPriorityExtMACStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
ACCESS read-write
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"Defines the status of the priority packet forwarding based
|
||||
on MAC address. Setting ctIfPriorityExtMACStatus to a value of
|
||||
disable(2), disables the forwarding of packets based on priority table
|
||||
information. All information remains in existence but is not
|
||||
considered in the forwarding decision."
|
||||
DEFVAL { enable }
|
||||
::= { ctPriorityExtMACConfig 1 }
|
||||
|
||||
ctPriorityExtNumMACEntries OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
ACCESS read-only
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"The number of active entries in the ctPriorityExtMACTable."
|
||||
::= { ctPriorityExtMACConfig 2 }
|
||||
|
||||
ctPriorityExtMaxNumMACEntries OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
ACCESS read-only
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"The maximum number of entries allowed in the ctPriorityExtMACTable."
|
||||
::= { ctPriorityExtMACConfig 3 }
|
||||
|
||||
ctPriorityExtMaxNumPktTypesPerMACEntry OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
ACCESS read-only
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"The maximum number of packet types that can be asssociated
|
||||
with any one MAC address in the ctPriorityExtMACTable"
|
||||
::= { ctPriorityExtMACConfig 4 }
|
||||
|
||||
|
||||
|
||||
ctPriorityExtMACTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF CtPriorityExtMACEntry
|
||||
ACCESS not-accessible
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"This table provides the ability to specify priority based
|
||||
on the MAC addresses encoded in a packet. There are several
|
||||
possible permutations achieveable via this table. Priorities
|
||||
in this table may be based on the following criteria:
|
||||
|
||||
Destination address and specific packet type and VLAN ID
|
||||
Destination address and specific packet type
|
||||
Destination address
|
||||
Source address and specific packet type and VLAN ID
|
||||
Source address and specific packet type
|
||||
Source address
|
||||
Destination or source address and specific packet type and VLAN ID
|
||||
Destination or source address and specific packet type
|
||||
Destination or source address
|
||||
Depending on the values set in the table which of these criteria
|
||||
will be used for any given packet.
|
||||
|
||||
If any given relationship can not be created the set will fail with a
|
||||
BAD-VALUE error."
|
||||
::= { ctPriorityExtMACConfig 5 }
|
||||
|
||||
|
||||
ctPriorityExtMACEntry OBJECT-TYPE
|
||||
SYNTAX CtPriorityExtMACEntry
|
||||
ACCESS not-accessible
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"Describes a particular MAC address priority entry."
|
||||
INDEX { ctPriorityExtMACAddr, ctPriorityExtAddrType,
|
||||
ctPriorityExtMACPktType, ctPriorityExtMACVlanId }
|
||||
::= { ctPriorityExtMACTable 1 }
|
||||
|
||||
CtPriorityExtMACEntry ::= SEQUENCE {
|
||||
ctPriorityExtMACAddr
|
||||
PhysAddress,
|
||||
ctPriorityExtAddrType
|
||||
INTEGER,
|
||||
ctPriorityExtMACPktType
|
||||
INTEGER,
|
||||
ctPriorityExtMACVlanId
|
||||
INTEGER,
|
||||
ctPriorityExtMACPriority
|
||||
INTEGER}
|
||||
|
||||
ctPriorityExtMACAddr OBJECT-TYPE
|
||||
SYNTAX PhysAddress
|
||||
ACCESS read-only
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"The MAC address which will have a priority associated with it
|
||||
as specified by ctPriorityExtMACPriority."
|
||||
::= { ctPriorityExtMACEntry 1 }
|
||||
|
||||
ctPriorityExtAddrType OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
destAddr(1),
|
||||
srcAddr(2),
|
||||
destOrSource(3)
|
||||
}
|
||||
ACCESS read-only
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"The type of MAC address which will have priority associated
|
||||
with it as specified by ctPriorityExtMACPriority."
|
||||
::= { ctPriorityExtMACEntry 2 }
|
||||
|
||||
ctPriorityExtMACPktType OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
ACCESS read-only
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"The packet type associated with a particular MAC address,
|
||||
specified by ctPriorityExtMACAddr, which will have priority
|
||||
associated with it as specified by ctPriorityExtMACPriority.
|
||||
A value of 1 indicates that this entry pertains to all
|
||||
packet types. A single value in the range of 0x0600..0xFFFF
|
||||
indicates that this entry only pertains to that particular packet
|
||||
type."
|
||||
::= { ctPriorityExtMACEntry 3 }
|
||||
|
||||
ctPriorityExtMACVlanId OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
ACCESS read-write
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"A set of 65335 (0xFFFF) causes the priority value specified in
|
||||
ctPriorityExtMACPriority to apply to all packets
|
||||
matching the criteria specified by ctPriorityExtMACAddr,
|
||||
ctPriorityExtAddrType, and ctPriorityExtMACPktType. Any
|
||||
value between 1 and 4095 is a valid VLAN ID (IEEE 802.1q)
|
||||
and causes ctPriorityExtMACPriority to only apply
|
||||
to packets that are of matching the above criteria and that are
|
||||
members of the IEEE 802.1q VLAN specified by the value set."
|
||||
-- DEFVAL { 65535 }
|
||||
::= { ctPriorityExtMACEntry 4 }
|
||||
|
||||
ctPriorityExtMACPriority OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
priority0(1), -- Lowest Priority
|
||||
priority1(2),
|
||||
priority2(3),
|
||||
priority3(4),
|
||||
priority4(5),
|
||||
priority5(6),
|
||||
priority6(7),
|
||||
priority7(8), -- Highest Priority
|
||||
delete(100)
|
||||
}
|
||||
ACCESS read-write
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"A set of delete(100) will delete this row from the
|
||||
ctPriorityExtMACTable. A set of priority(1-8) will either
|
||||
create a row in the ctPriorityExtMACTable with the specified
|
||||
priority or modify an existing entry with the newly specified
|
||||
priority."
|
||||
::= { ctPriorityExtMACEntry 5 }
|
||||
|
||||
|
||||
ctPriorityExtPktTypeConfig OBJECT IDENTIFIER ::= { ctPriorityExt 3 }
|
||||
-- Control of priorities is based exclusively on packet
|
||||
-- type and optionally VLAN ID. This control is defined by creating a
|
||||
-- row in the ctPriorityExtPktTypeTable specifying the packet type with
|
||||
-- ctPriorityExtPktTypePriority set to a value in the range of 1-8.
|
||||
-- When an entry is made in the aforementioned table all packets
|
||||
-- matching those criteria will be forwarded with the specifed priority.
|
||||
-- Additionally any ports that support IEEE 802.1p and 802.1q frame tagging
|
||||
-- will encode the priority in the frame tag of the packet.
|
||||
-- The implementation of this group is optional.
|
||||
|
||||
ctPriorityExtPktTypeStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
ACCESS read-write
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"Defines the status of the priority packet forwarding based
|
||||
exclusively on packet type. Setting ctIfPriorityPktTypeExtStatus
|
||||
to a value of disable(2) disables the forwarding of packets
|
||||
based on priority table information. All information remains
|
||||
in existence but is not considered in the forwarding decision."
|
||||
DEFVAL { enable }
|
||||
::= { ctPriorityExtPktTypeConfig 1 }
|
||||
|
||||
|
||||
ctPriorityExtNumPktTypeEntries OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
ACCESS read-only
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"The number of active entries in the ctPriorityExtPktTypeTable."
|
||||
::= { ctPriorityExtPktTypeConfig 2 }
|
||||
|
||||
ctPriorityExtMaxNumPktTypeEntries OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
ACCESS read-only
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"The maximum number of entries allowed in the
|
||||
ctPriorityExtPktTypeTable."
|
||||
::= { ctPriorityExtPktTypeConfig 3 }
|
||||
|
||||
ctPriorityExtPktTypeTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF CtPriorityExtPktTypeEntry
|
||||
ACCESS not-accessible
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"This table provides the ability to specify priority based
|
||||
on the packet type encoded in a packet. Priorities
|
||||
in this table may be based on the following criteria:
|
||||
|
||||
Packet type and VLAN ID
|
||||
Packet type
|
||||
|
||||
If any given relationship can not be created the set will fail with a
|
||||
BAD-VALUE error."
|
||||
::= { ctPriorityExtPktTypeConfig 4 }
|
||||
|
||||
|
||||
ctPriorityExtPktTypeEntry OBJECT-TYPE
|
||||
SYNTAX CtPriorityExtPktTypeEntry
|
||||
ACCESS not-accessible
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"Describes a particular packet type priority entry."
|
||||
INDEX { ctPriorityExtPktType, ctPriorityExtPktTypeVlanId }
|
||||
::= { ctPriorityExtPktTypeTable 1 }
|
||||
|
||||
|
||||
CtPriorityExtPktTypeEntry ::= SEQUENCE {
|
||||
ctPriorityExtPktType
|
||||
INTEGER,
|
||||
ctPriorityExtPktTypeVlanId
|
||||
INTEGER,
|
||||
ctPriorityExtPktTypePriority
|
||||
INTEGER}
|
||||
|
||||
ctPriorityExtPktType OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
ACCESS read-only
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"The packet type which will have priority associated with
|
||||
it as specified by ctPriorityExtPktTypePriority.
|
||||
A value of 1 indicates that this entry pertains to all
|
||||
packet types. A single value in the range of 0x0600..0xFFFF
|
||||
indicates that this entry only pertains to that particular packet
|
||||
type."
|
||||
::= { ctPriorityExtPktTypeEntry 1 }
|
||||
|
||||
ctPriorityExtPktTypeVlanId OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
ACCESS read-write
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"A set of 65535 (0xFFFF) causes the priority value specified in
|
||||
ctPriorityExtPktTypePriority to apply to all packets
|
||||
of the type specified by ctPriorityExtPktType. Any
|
||||
value between 1 and 4095 is a valid VLAN ID (IEEE 802.1q)
|
||||
and causes ctPriorityExtPktTypePriority to only apply
|
||||
to packets that are of ctPriorityExtPktType type and are
|
||||
members of the IEEE 802.1q VLAN specified by the value set."
|
||||
-- DEFVAL { 65535 }
|
||||
::= { ctPriorityExtPktTypeEntry 2 }
|
||||
|
||||
ctPriorityExtPktTypePriority OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
priority0(1), -- Lowest Priority
|
||||
priority1(2),
|
||||
priority2(3),
|
||||
priority3(4),
|
||||
priority4(5),
|
||||
priority5(6),
|
||||
priority6(7),
|
||||
priority7(8), -- Highest Priority
|
||||
delete(100)
|
||||
}
|
||||
ACCESS read-write
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"A set of delete(100) will delete this row from the
|
||||
ctPriorityExtPriorityTypeTable. A set of priority(1-8) will either
|
||||
create a row in the ctPriorityExtPriorityTypeTable with the specified
|
||||
priority or modify an existing entry with the newly specified
|
||||
priority."
|
||||
::= { ctPriorityExtPktTypeEntry 3 }
|
||||
|
||||
|
||||
|
||||
ctPriorityExtPortConfig OBJECT IDENTIFIER ::= { ctPriorityExt 4 }
|
||||
|
||||
-- Control of priorities is based exclusively on port.
|
||||
-- Each port will have a priority associated with it.
|
||||
-- When a packet is recieved on that port it will
|
||||
-- be given the priority of the port it is received on.
|
||||
-- If the incoming packet already has a priority associated
|
||||
-- with it, the incoming priority will remain intact, or be replaced
|
||||
-- with the port priority, based on the value of
|
||||
-- ctPriorityExtPortFwdInboundPriority.
|
||||
-- The implementation of this group is optional.
|
||||
|
||||
ctPriorityExtPortStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
ACCESS read-write
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"Defines the status of the priority packet forwarding based
|
||||
on receive port. Setting ctIfPriorityExtPortStatus to a value of
|
||||
disable(2), disables the forwarding of packets based on priority table
|
||||
information. All information remains in existence but is not
|
||||
considered in the forwarding decision."
|
||||
DEFVAL { enable }
|
||||
::= { ctPriorityExtPortConfig 1 }
|
||||
|
||||
ctPriorityExtPortTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF CtPriorityExtPortEntry
|
||||
ACCESS not-accessible
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"This table provides information pertaining to the priority associated
|
||||
with a receive port."
|
||||
::= { ctPriorityExtPortConfig 2 }
|
||||
|
||||
|
||||
ctPriorityExtPortEntry OBJECT-TYPE
|
||||
SYNTAX CtPriorityExtPortEntry
|
||||
ACCESS not-accessible
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"Specifies the priority associated with a specific physical
|
||||
interface."
|
||||
INDEX { ctPriorityExtPortSlotNum, ctPriorityExtPortInterfaceNum }
|
||||
::= { ctPriorityExtPortTable 1 }
|
||||
|
||||
|
||||
CtPriorityExtPortEntry ::= SEQUENCE {
|
||||
ctPriorityExtPortSlotNum
|
||||
INTEGER,
|
||||
ctPriorityExtPortInterfaceNum
|
||||
INTEGER,
|
||||
ctPriorityExtPortPriority
|
||||
INTEGER,
|
||||
ctPriorityExtFwdInboundPriority
|
||||
INTEGER
|
||||
}
|
||||
|
||||
ctPriorityExtPortSlotNum OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
ACCESS read-only
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"The slot num of the device that the interface is located on."
|
||||
::= { ctPriorityExtPortEntry 1 }
|
||||
|
||||
|
||||
ctPriorityExtPortInterfaceNum OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
ACCESS read-only
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"The interface number for which the information is requested."
|
||||
::= { ctPriorityExtPortEntry 2 }
|
||||
|
||||
ctPriorityExtPortPriority OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
priority0(1), -- Lowest Priority
|
||||
priority1(2),
|
||||
priority2(3),
|
||||
priority3(4),
|
||||
priority4(5),
|
||||
priority5(6),
|
||||
priority6(7),
|
||||
priority7(8) -- Highest Priority
|
||||
}
|
||||
ACCESS read-write
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"A set of priority(1-8) will modify an existing entry
|
||||
with the newly specified priority. Entries cannot be
|
||||
deleted from this table."
|
||||
DEFVAL { priority0 }
|
||||
::= { ctPriorityExtPortEntry 3 }
|
||||
|
||||
ctPriorityExtFwdInboundPriority OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
ACCESS read-write
|
||||
STATUS mandatory
|
||||
DESCRIPTION
|
||||
"This controls whether a packet that is received with a priority tag
|
||||
is forwarded with the priority encoded in the tag or the default
|
||||
priority of the port. A value of enable(1) means the packet will
|
||||
be forwarded with the priority encoded in the tag. A value of
|
||||
disable(2) means the packet will be given the default priority
|
||||
of the port it was received on."
|
||||
DEFVAL { enable }
|
||||
::= { ctPriorityExtPortEntry 4 }
|
||||
|
||||
END
|
||||
Reference in New Issue
Block a user