Initial commit
This commit is contained in:
David Leutgeb
915
MIBS/extreme/EXTREME-EAPS-MIB
Normal file
915
MIBS/extreme/EXTREME-EAPS-MIB
Normal file
@@ -0,0 +1,915 @@
|
||||
-- ################################################################################
|
||||
|
||||
EXTREME-EAPS-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
IMPORTS
|
||||
MODULE-IDENTITY FROM SNMPv2-SMI
|
||||
OBJECT-TYPE FROM SNMPv2-SMI
|
||||
Unsigned32 FROM SNMPv2-SMI
|
||||
TEXTUAL-CONVENTION FROM SNMPv2-TC
|
||||
TruthValue FROM SNMPv2-TC
|
||||
RowStatus FROM SNMPv2-TC
|
||||
DisplayString FROM RFC1213-MIB
|
||||
extremeAgent FROM EXTREME-BASE-MIB;
|
||||
|
||||
extremeEaps MODULE-IDENTITY
|
||||
LAST-UPDATED "0502151530Z"
|
||||
ORGANIZATION "Extreme Networks, Inc."
|
||||
CONTACT-INFO "www.extremenetworks.com"
|
||||
DESCRIPTION "Ethernet Automatic Protection Switching information."
|
||||
::= { extremeAgent 18 }
|
||||
|
||||
|
||||
EapsDomainMode
|
||||
::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION "Indicates the configured mode of an EAPS domain."
|
||||
SYNTAX INTEGER { invalid (0),
|
||||
master (1),
|
||||
transit (2)
|
||||
}
|
||||
|
||||
EapsMbrVlanType
|
||||
::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION "Indicates the type of vlan, whether it is control or
|
||||
protected vlan, that is being added to the
|
||||
EAPS domain."
|
||||
SYNTAX INTEGER { unassigned (0),
|
||||
control (1),
|
||||
protected (2)
|
||||
}
|
||||
|
||||
EapsRingPort
|
||||
::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION "This represents an EAPS ring-port."
|
||||
SYNTAX INTEGER (0..2147483647)
|
||||
|
||||
EapsPortType
|
||||
::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION "Indicates the ring port of the EAPS domains. The ring port
|
||||
can be primary or secondary. This is used to specify which
|
||||
port is being unconfigured."
|
||||
SYNTAX INTEGER {
|
||||
primary (1),
|
||||
secondary (2)
|
||||
}
|
||||
|
||||
EapsDomainState
|
||||
::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION "The operational state of an EAPS domain.
|
||||
The states complete(1), failed(2), init(6), precomplete(7),
|
||||
and preinit(8) apply only to domains configured as master.
|
||||
The states linksup(3), linkdown(4) and preforwarding(5)
|
||||
apply only to domains configured as transit.
|
||||
The state init(0) applys to domains configured as either
|
||||
master or transit."
|
||||
SYNTAX INTEGER { idle (0),
|
||||
complete (1),
|
||||
failed (2),
|
||||
linksup (3),
|
||||
linkdown (4),
|
||||
preforwarding (5),
|
||||
init (6),
|
||||
precomplete (7),
|
||||
preinit (8)
|
||||
}
|
||||
|
||||
EapsDomainPortStatus
|
||||
::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION "The operational state of an EAPS domain's ring-ports.
|
||||
If the state is unknown (0), it indicates the domain is
|
||||
still not up yet.
|
||||
The valid states are up(1), down(2), blocked(3)."
|
||||
SYNTAX INTEGER {
|
||||
unknown (0),
|
||||
up (1),
|
||||
down (2),
|
||||
blocked (3)
|
||||
}
|
||||
|
||||
EapsFailTimerExpiryAction
|
||||
::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION "The action to take when the failed timer expires.
|
||||
|
||||
If action is configured to sendAlert(0), and the
|
||||
fail expires, the Master will remain in Complete or Init
|
||||
state, and a trap - extremeEapsFailTimerExpFlagSet - will
|
||||
be sent.
|
||||
When this fail timer stops expiring another trap -
|
||||
extremeEapsFailTimerExpFlagClear - will be sent.
|
||||
|
||||
If the action is configured to openSecondaryPort(1), and
|
||||
the fail timer expires, the Master's state will be set to
|
||||
Failed, and it will open the secondary port."
|
||||
SYNTAX INTEGER { sendAlert (0),
|
||||
openSecondaryPort (1)
|
||||
}
|
||||
|
||||
EapsSharedPortState
|
||||
::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION "The operational state of an EAPS Shared-Port instance.
|
||||
The states are idle(0), ready(1), blocking(2), and
|
||||
preforwarding(3)."
|
||||
SYNTAX INTEGER { idle (0),
|
||||
ready (1),
|
||||
blocking (2),
|
||||
preforwarding (3)
|
||||
}
|
||||
|
||||
|
||||
EapsSharedPortMode
|
||||
::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION "If the mode is unconfigured(0), it indicates the EAPS
|
||||
shared port's mode has yet to be configured.
|
||||
The valid configured modes of an EAPS Shared-port are
|
||||
controller(1) and partner(2)"
|
||||
SYNTAX INTEGER {
|
||||
unconfigured (0),
|
||||
controller (1),
|
||||
partner (2)
|
||||
}
|
||||
|
||||
EapsSharedPortSegmentTimerExpiryAction
|
||||
::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION "The action to take when the EAPS Shared-port's segment
|
||||
timer expires.
|
||||
|
||||
If action is configured to sendAlert(0), and the
|
||||
segment timer expires, the segment's status will remain
|
||||
in Up state, and a trap -
|
||||
extremeEapsSegmentTimerExpFlagSet - will be sent.
|
||||
When this segment timer stops expiring another trap -
|
||||
extremeEapsSegmentTimerExpFlagClear - will be sent.
|
||||
|
||||
If the action is configured to segmentDown(1), and the
|
||||
segment timer expires, the segment's status will be set to
|
||||
Down."
|
||||
SYNTAX INTEGER { sendAlert (0),
|
||||
segmentDown (1)
|
||||
}
|
||||
|
||||
EapsSharedPortNeighborStatus
|
||||
::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION "The operational status of an EAPS Shared-port's neighbor
|
||||
reachabilty.
|
||||
The states are neighborDown(0), neighborUp(1), and
|
||||
neighborError(2)."
|
||||
SYNTAX INTEGER { neighborDown (0),
|
||||
neighborUp (1),
|
||||
neighborError (2)
|
||||
}
|
||||
|
||||
EapsSharedPortRootBlockerStatus
|
||||
::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION "The operational status of an EAPS Shared-port's Root-
|
||||
Blocker.
|
||||
The states are false(0), active(1), and inactive(2)."
|
||||
SYNTAX INTEGER { false (0),
|
||||
active (1),
|
||||
inactive (2)
|
||||
}
|
||||
|
||||
EapsSharedPortSegmentStatus
|
||||
::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION "The operational status of an EAPS Shared-port's segments.
|
||||
The states are unknown(0), segUp(1), segDown(2),
|
||||
segBlockingUp(3) and segBlockingDown(4)."
|
||||
SYNTAX INTEGER { unknown (0),
|
||||
segUp (1),
|
||||
segDown (2),
|
||||
segBlockingUp (3),
|
||||
segBlockingDown (4)
|
||||
}
|
||||
|
||||
EapsSharedPortVlanPortStatus
|
||||
::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION "The operational status of an EAPS Shared-port's vlan-port.
|
||||
The states are unknown(0), activeOpen(1), blocked(2),
|
||||
open(3) and down(4)."
|
||||
SYNTAX INTEGER { unknown (0),
|
||||
activeOpen (1),
|
||||
blocked (2),
|
||||
open (3),
|
||||
down (4)
|
||||
}
|
||||
|
||||
EapsDomainPriority
|
||||
::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION "Indicates the configured priority of an EAPS domain."
|
||||
SYNTAX INTEGER { normal (0),
|
||||
high (1)
|
||||
}
|
||||
|
||||
extremeEapsTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ExtremeEapsEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table contains EAPS information about all EAPS
|
||||
domains on this device."
|
||||
::= { extremeEaps 1 }
|
||||
|
||||
|
||||
extremeEapsEntry OBJECT-TYPE
|
||||
SYNTAX ExtremeEapsEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An individual entry of this table contains EAPS
|
||||
information related to that EAPS domain."
|
||||
INDEX { extremeEapsName }
|
||||
::= { extremeEapsTable 1 }
|
||||
|
||||
ExtremeEapsEntry ::= SEQUENCE {
|
||||
extremeEapsName DisplayString,
|
||||
extremeEapsMode EapsDomainMode,
|
||||
extremeEapsState EapsDomainState,
|
||||
extremeEapsFailedFlag TruthValue,
|
||||
extremeEapsEnabled TruthValue,
|
||||
extremeEapsPrimaryPort EapsRingPort,
|
||||
extremeEapsSecondaryPort EapsRingPort,
|
||||
extremeEapsHelloTimer INTEGER,
|
||||
extremeEapsHelloTimerMs INTEGER,
|
||||
extremeEapsFailedTimer INTEGER,
|
||||
extremeEapsFailedTimerExpiryAction EapsFailTimerExpiryAction,
|
||||
extremeEapsUnconfigRingPort EapsPortType,
|
||||
extremeEapsPrimaryStatus EapsDomainPortStatus,
|
||||
extremeEapsSecondaryStatus EapsDomainPortStatus,
|
||||
extremeEapsProtectedVlansCount INTEGER,
|
||||
extremeEapsPriority EapsDomainPriority,
|
||||
extremeEapsRowStatus RowStatus
|
||||
}
|
||||
|
||||
extremeEapsName OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(1..32))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The EAPS domain name."
|
||||
::= { extremeEapsEntry 1 }
|
||||
|
||||
extremeEapsMode OBJECT-TYPE
|
||||
SYNTAX EapsDomainMode
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION "This indicates the mode of the EAPS domain."
|
||||
::= { extremeEapsEntry 2 }
|
||||
|
||||
extremeEapsState OBJECT-TYPE
|
||||
SYNTAX EapsDomainState
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "This indicates the current EAPS state of this EAPS
|
||||
domain."
|
||||
::= { extremeEapsEntry 3 }
|
||||
|
||||
extremeEapsFailedFlag OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "This indicates the status of the failed flag.
|
||||
If the failed timer expires while its expiry action is
|
||||
configured to sendAlert, this failed flag is set.
|
||||
It is then cleared when the failed timer stops expiring, or
|
||||
the expiry action is configured to openSecondaryPort."
|
||||
::= { extremeEapsEntry 4 }
|
||||
|
||||
extremeEapsEnabled OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION "This indicated if this domain has been enabled or not."
|
||||
::= { extremeEapsEntry 5 }
|
||||
|
||||
extremeEapsPrimaryPort OBJECT-TYPE
|
||||
SYNTAX EapsRingPort
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION "This indicates the EAPS domain's primary ring-port.
|
||||
Value of 0 indicates the primary port is still not
|
||||
configured"
|
||||
::= { extremeEapsEntry 6 }
|
||||
|
||||
extremeEapsSecondaryPort OBJECT-TYPE
|
||||
SYNTAX EapsRingPort
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION "This indicates the EAPS domain's secondary ring-port.
|
||||
Value of 0 indicates the secondary port is still not
|
||||
configured"
|
||||
::= { extremeEapsEntry 7 }
|
||||
|
||||
extremeEapsHelloTimer OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..15)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION "This indicates the EAPS domain's hello timer's value
|
||||
in seconds."
|
||||
::= { extremeEapsEntry 8 }
|
||||
|
||||
extremeEapsFailedTimer OBJECT-TYPE
|
||||
SYNTAX INTEGER (2..300)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION "This indicates the EAPS domain's failed timer's value
|
||||
in seconds."
|
||||
::= { extremeEapsEntry 9 }
|
||||
|
||||
extremeEapsFailedTimerExpiryAction OBJECT-TYPE
|
||||
SYNTAX EapsFailTimerExpiryAction
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION "This indicates the action taken by the domain when the
|
||||
fail timer expires.
|
||||
If the action is to sendAlert, then a SNMP trap -
|
||||
extremeEapsFailTimerExpFlagSet - will be sent, and the
|
||||
secondary port will continue to remain in blocking state.
|
||||
If the action is to openSecondaryPort, then the secondary
|
||||
port will open and be set to forwarding state."
|
||||
::= { extremeEapsEntry 10 }
|
||||
|
||||
extremeEapsUnconfigRingPort OBJECT-TYPE
|
||||
SYNTAX EapsPortType
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This specifies which EAPS domain port is being
|
||||
unconfigured.
|
||||
Value of 1, indicates unconfigure the primary port.
|
||||
Value of 2, indicates unconfigure secondary port."
|
||||
::= { extremeEapsEntry 11 }
|
||||
|
||||
extremeEapsPrimaryStatus OBJECT-TYPE
|
||||
SYNTAX EapsDomainPortStatus
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "This indicates the status of the EAPS domain's primary
|
||||
ring-port."
|
||||
::= { extremeEapsEntry 12 }
|
||||
|
||||
extremeEapsSecondaryStatus OBJECT-TYPE
|
||||
SYNTAX EapsDomainPortStatus
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "This indicates the status of the EAPS domain's secondary
|
||||
ring-port."
|
||||
::= { extremeEapsEntry 13 }
|
||||
|
||||
extremeEapsProtectedVlansCount OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..65535)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "This gives the count of the number of vlans that are
|
||||
being protected by this EAPS domain."
|
||||
::= { extremeEapsEntry 14 }
|
||||
|
||||
extremeEapsRowStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION "The status of this entry as per standard RowStatus
|
||||
conventions."
|
||||
::= { extremeEapsEntry 15 }
|
||||
|
||||
extremeEapsHelloTimerMs OBJECT-TYPE
|
||||
SYNTAX INTEGER (100..900)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "This indicates the milliseconds portion of the EAPS domain's hello timer value
|
||||
in milliseconds."
|
||||
::= { extremeEapsEntry 16 }
|
||||
|
||||
|
||||
extremeEapsPriority OBJECT-TYPE
|
||||
SYNTAX EapsDomainPriority
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION "This gives the priority of the domain. Used along with spatial re-use to prioritize
|
||||
handling of domains during a topology change."
|
||||
::= { extremeEapsEntry 17 }
|
||||
|
||||
extremeEapsPrevState OBJECT-TYPE
|
||||
SYNTAX EapsDomainState
|
||||
MAX-ACCESS accessible-for-notify
|
||||
STATUS current
|
||||
DESCRIPTION "This indicates the previous EAPS state of this EAPS
|
||||
domain. Used in state change traps information."
|
||||
::= { extremeEaps 2 }
|
||||
|
||||
|
||||
extremeEapsGlobalInfo OBJECT IDENTIFIER
|
||||
::= { extremeEaps 3 }
|
||||
|
||||
extremeEapsGlobalEnabled OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Indicates if EAPS is enabled globally on the switch."
|
||||
::= { extremeEapsGlobalInfo 1 }
|
||||
|
||||
extremeEapsGlobalFastConvergence OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Indicates if Fast Convergence is enabled globally on the
|
||||
switch."
|
||||
::= { extremeEapsGlobalInfo 2 }
|
||||
|
||||
extremeEapsLastConfigurationChange OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "Indicates the last time there was any change in
|
||||
EAPS configuration on the switch."
|
||||
::= { extremeEapsGlobalInfo 3 }
|
||||
|
||||
|
||||
extremeEapsLastStatusChange OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "Indicates the last time there was any change in
|
||||
EAPS domain, EAPS port, shared port, or segment status on
|
||||
the switch. Time changes for extremeEapsState,
|
||||
extremeEapsSharedPortState, extremeEapsSharedPortSegmentStatus,
|
||||
extremeEapsFailedFlag, extremeEapsPrimaryStatus,
|
||||
extremeEapsSecondaryStatus, extremeEapsSharedPortNbrStatus,
|
||||
extremeEapsSharedPortRootBlockerStatus,
|
||||
extremeEapsSharedPortSegmentFlagFailed."
|
||||
::= { extremeEapsGlobalInfo 4 }
|
||||
|
||||
extremeEapsStatusTrapCount OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "Indicates the number of status traps sent out since the switch
|
||||
booted. Status traps counted include
|
||||
extremeEapsSharedPortStateChange
|
||||
extremeEapsRootBlockerStatusChange
|
||||
extremeEapsPortStatusChange
|
||||
extremeEapsStateChange
|
||||
extremeEapsFailTimerExpFlagSet
|
||||
extremeEapsFailTimerExpFlagClear."
|
||||
::= { extremeEapsGlobalInfo 5 }
|
||||
|
||||
extremeEapsGlobalMulticastAddRingPorts OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Ring ports are added to existing multicast groups for protected
|
||||
vlans on a topology change event."
|
||||
|
||||
::= { extremeEapsGlobalInfo 6 }
|
||||
|
||||
extremeEapsGlobalMulticastSendIGMPQuery OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "IGMP Query is sent out on all protected vlans on a topology change
|
||||
event."
|
||||
::= { extremeEapsGlobalInfo 7 }
|
||||
|
||||
extremeEapsGlobalMulticastTempFlooding OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Temporary Multicast flooding occurs on all protected vlans on a
|
||||
topology change event."
|
||||
::= { extremeEapsGlobalInfo 8 }
|
||||
|
||||
extremeEapsGlobalMulticastTempFloodingDuration OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The duration at which temporary Multicast flooding will occur."
|
||||
::= { extremeEapsGlobalInfo 9 }
|
||||
|
||||
extremeEapsMbrVlanTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ExtremeEapsMbrVlanEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION "This table contains the control and all protected vlans
|
||||
added to each EAPS domain on this device.
|
||||
There can be only 1 control vlan, while many
|
||||
protected vlans added to a EAPS domain."
|
||||
::= { extremeEaps 4 }
|
||||
|
||||
extremeEapsMbrVlanEntry OBJECT-TYPE
|
||||
SYNTAX ExtremeEapsMbrVlanEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION "An individual entry of this table correlates a EAPS
|
||||
domain with a VLAN added to it and its type whether it is
|
||||
control or protected."
|
||||
INDEX { extremeEapsName,
|
||||
extremeEapsMbrVlanName,
|
||||
extremeEapsMbrVlanType
|
||||
}
|
||||
::= { extremeEapsMbrVlanTable 1 }
|
||||
|
||||
ExtremeEapsMbrVlanEntry ::= SEQUENCE {
|
||||
extremeEapsMbrVlanName DisplayString,
|
||||
extremeEapsMbrVlanType EapsMbrVlanType,
|
||||
extremeEapsMbrVlanTag INTEGER,
|
||||
extremeEapsMbrVlanRowStatus RowStatus
|
||||
}
|
||||
|
||||
extremeEapsMbrVlanName OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..32))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "The member VLAN's name."
|
||||
::= { extremeEapsMbrVlanEntry 1 }
|
||||
|
||||
extremeEapsMbrVlanType OBJECT-TYPE
|
||||
SYNTAX EapsMbrVlanType
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "The member VLAN's type whether it is control or
|
||||
protected."
|
||||
::= { extremeEapsMbrVlanEntry 2 }
|
||||
|
||||
extremeEapsMbrVlanTag OBJECT-TYPE
|
||||
SYNTAX INTEGER (1..4095)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "The member VLAN's Vlan Id tag."
|
||||
::= { extremeEapsMbrVlanEntry 3 }
|
||||
|
||||
extremeEapsMbrVlanRowStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION "The status of this entry as per standard RowStatus
|
||||
conventions."
|
||||
::= { extremeEapsMbrVlanEntry 4 }
|
||||
|
||||
|
||||
extremeEapsSharedPortTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ExtremeEapsSharedPortEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION "This table contains all EAPS shared ports configured
|
||||
on this device."
|
||||
::= { extremeEaps 5 }
|
||||
|
||||
extremeEapsSharedPortEntry OBJECT-TYPE
|
||||
SYNTAX ExtremeEapsSharedPortEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION "An individual entry of this table describes the
|
||||
configuration of an EAPS shared port."
|
||||
INDEX { extremeEapsSharedPortIfIndex }
|
||||
::= { extremeEapsSharedPortTable 1 }
|
||||
|
||||
ExtremeEapsSharedPortEntry ::= SEQUENCE {
|
||||
extremeEapsSharedPortIfIndex EapsRingPort,
|
||||
extremeEapsSharedPortMode EapsSharedPortMode,
|
||||
extremeEapsSharedPortLinkId INTEGER,
|
||||
extremeEapsSharedPortSegmentTimerExpiryAction EapsSharedPortSegmentTimerExpiryAction,
|
||||
extremeEapsSharedPortState EapsSharedPortState,
|
||||
extremeEapsSharedPortNbrStatus EapsSharedPortNeighborStatus,
|
||||
extremeEapsSharedPortDomainsCount INTEGER,
|
||||
extremeEapsSharedPortProtectedVlansCount INTEGER,
|
||||
extremeEapsSharedPortRootBlockerStatus EapsSharedPortRootBlockerStatus,
|
||||
extremeEapsSharedPortRootBlockerId INTEGER,
|
||||
extremeEapsSharedPortRowStatus RowStatus,
|
||||
extremeEapsSharedPortSegmentHealthInterval INTEGER,
|
||||
extremeEapsSharedPortSegmentTimeout INTEGER,
|
||||
extremeEapsSharedPortCommonPathFailedFlag TruthValue,
|
||||
extremeEapsSharedPortCommonPathHealthInterval INTEGER,
|
||||
extremeEapsSharedPortCommonPathTimeout INTEGER
|
||||
}
|
||||
|
||||
extremeEapsSharedPortIfIndex OBJECT-TYPE
|
||||
SYNTAX EapsRingPort
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "The ifIndex of a port configured as an EAPS shared port."
|
||||
::= { extremeEapsSharedPortEntry 1 }
|
||||
|
||||
extremeEapsSharedPortMode OBJECT-TYPE
|
||||
SYNTAX EapsSharedPortMode
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION "The configured mode of the EAPS shared port."
|
||||
::= { extremeEapsSharedPortEntry 2 }
|
||||
|
||||
extremeEapsSharedPortLinkId OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..65534)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION "The configured Link Id for the EAPS shared port.
|
||||
Each common link in the entire network will be assigned a
|
||||
unique link Id. Each shared-port instance on either end
|
||||
of this common link will be configured with this
|
||||
link Id.
|
||||
Value of 0 indicates the link Id is still not configured."
|
||||
::= { extremeEapsSharedPortEntry 3 }
|
||||
|
||||
extremeEapsSharedPortSegmentTimerExpiryAction OBJECT-TYPE
|
||||
SYNTAX EapsSharedPortSegmentTimerExpiryAction
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION "This indicates the action taken by the EAPS Shared port
|
||||
instance when a segment timer expires.
|
||||
If the action is sendAlert, then when the segment timer
|
||||
expires, an SNMP trap will be sent, and the segment will
|
||||
remain in Up state, with the failed flag set to True.
|
||||
If the action is segmentDown, then when the timer expires,
|
||||
the segment will be set to Down state."
|
||||
::= { extremeEapsSharedPortEntry 4 }
|
||||
|
||||
extremeEapsSharedPortState OBJECT-TYPE
|
||||
SYNTAX EapsSharedPortState
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "This indicates the state of the EAPS Shared port instance.
|
||||
The states can be idle(0), ready(1), blocking(2), and
|
||||
preforwarding(3)."
|
||||
::= { extremeEapsSharedPortEntry 5 }
|
||||
|
||||
extremeEapsSharedPortNbrStatus OBJECT-TYPE
|
||||
SYNTAX EapsSharedPortNeighborStatus
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "This indicates the status of reachabilty to the neighbor
|
||||
on the other end of the Shared-segment.
|
||||
If the neighbor on the other end is reachable with
|
||||
matching link-id and different modes, then the status is
|
||||
NeighborUp.
|
||||
If the neighbor is not reachable, this status is
|
||||
NeighborDown.
|
||||
If the neighbor is reachable, but with the same mode,
|
||||
then this status is set to Error."
|
||||
::= { extremeEapsSharedPortEntry 6 }
|
||||
|
||||
extremeEapsSharedPortDomainsCount OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..65535)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "This gives the count of the number of EAPS domains that
|
||||
are sharing this shared-port."
|
||||
::= { extremeEapsSharedPortEntry 7 }
|
||||
|
||||
extremeEapsSharedPortProtectedVlansCount OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..65535)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "This gives the count of the number of vlans that are
|
||||
being protected by this shared-port instance."
|
||||
::= { extremeEapsSharedPortEntry 8 }
|
||||
|
||||
extremeEapsSharedPortRootBlockerStatus OBJECT-TYPE
|
||||
SYNTAX EapsSharedPortRootBlockerStatus
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "If this shared port instance is not in Root blocker state,
|
||||
the status is False.
|
||||
If the shared port is in Root blocker state, and its
|
||||
path detect message is being returned to it, it is in
|
||||
Active state.
|
||||
If the shared port is in Root blocker state, but its
|
||||
path detect message is not making it back to itself, then
|
||||
its root blocker status is Inactive."
|
||||
::= { extremeEapsSharedPortEntry 9 }
|
||||
|
||||
extremeEapsSharedPortRootBlockerId OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..65535)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "This is the Link Id of the Root Blocker in the entire
|
||||
network.
|
||||
If there is no root blocker in the network, this value
|
||||
is 65535."
|
||||
::= { extremeEapsSharedPortEntry 10 }
|
||||
|
||||
extremeEapsSharedPortRowStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION "The status of this entry as per standard RowStatus
|
||||
conventions."
|
||||
::= { extremeEapsSharedPortEntry 11 }
|
||||
|
||||
|
||||
extremeEapsSharedPortSegmentHealthInterval OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..15)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "Interval at which health check PDUs are sent out each segment port."
|
||||
::= { extremeEapsSharedPortEntry 12 }
|
||||
|
||||
|
||||
extremeEapsSharedPortSegmentTimeout OBJECT-TYPE
|
||||
SYNTAX INTEGER (3..30)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "Time in seconds where segment fail timer expires, fail flag is set, and
|
||||
expiry action is taken."
|
||||
::= { extremeEapsSharedPortEntry 13 }
|
||||
|
||||
extremeEapsSharedPortCommonPathFailedFlag OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "Shared port link fail timer expired, but our shared port link is up."
|
||||
::= { extremeEapsSharedPortEntry 14 }
|
||||
|
||||
extremeEapsSharedPortCommonPathHealthInterval OBJECT-TYPE
|
||||
SYNTAX INTEGER (1..10)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "Interval at which health check PDUs are sent out shared port."
|
||||
::= { extremeEapsSharedPortEntry 15 }
|
||||
|
||||
extremeEapsSharedPortCommonPathTimeout OBJECT-TYPE
|
||||
SYNTAX INTEGER (3..30)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "Time in seconds where shared link fail timer expires and fail flag is set"
|
||||
::= { extremeEapsSharedPortEntry 16 }
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
extremeEapsSharedPortSegmentTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ExtremeEapsSharedPortSegmentEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION "This table contains the EAPS shared port's segments
|
||||
information"
|
||||
::= { extremeEaps 6 }
|
||||
|
||||
extremeEapsSharedPortSegmentEntry OBJECT-TYPE
|
||||
SYNTAX ExtremeEapsSharedPortSegmentEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION "An individual entry of this table describes the EAPS
|
||||
shared port's segment information. It will describe the
|
||||
EAPS domain, the segment's status, and other information
|
||||
related to neighboring node's blocking status."
|
||||
INDEX { extremeEapsSharedPortIfIndex,
|
||||
extremeEapsSharedPortSegmentPort,
|
||||
extremeEapsName
|
||||
}
|
||||
::= { extremeEapsSharedPortSegmentTable 1 }
|
||||
|
||||
ExtremeEapsSharedPortSegmentEntry ::= SEQUENCE {
|
||||
extremeEapsSharedPortSegmentPort EapsRingPort,
|
||||
extremeEapsSharedPortSegmentStatus EapsSharedPortSegmentStatus,
|
||||
extremeEapsSharedPortSegmentFailedFlag TruthValue,
|
||||
extremeEapsSharedPortSegmentVlanPortCount INTEGER,
|
||||
extremeEapsSharedPortSegmentAdjId INTEGER,
|
||||
extremeEapsSharedPortSegmentRBD INTEGER
|
||||
}
|
||||
|
||||
extremeEapsSharedPortSegmentPort OBJECT-TYPE
|
||||
SYNTAX EapsRingPort
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "The segment port on a segment which is part of an EAPS
|
||||
shared port."
|
||||
::= { extremeEapsSharedPortSegmentEntry 1 }
|
||||
|
||||
extremeEapsSharedPortSegmentStatus OBJECT-TYPE
|
||||
SYNTAX EapsSharedPortSegmentStatus
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "The status of a segment port which is part of an EAPS
|
||||
shared port."
|
||||
::= { extremeEapsSharedPortSegmentEntry 2 }
|
||||
|
||||
extremeEapsSharedPortSegmentFailedFlag OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "The status of the failed flag on a segment port which is
|
||||
part of an EAPS shared port.
|
||||
This flag will be set to TRUE if the segment's fail timer
|
||||
expiry action is set to sendAlert, and this timer expires"
|
||||
::= { extremeEapsSharedPortSegmentEntry 3 }
|
||||
|
||||
extremeEapsSharedPortSegmentVlanPortCount OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..65535)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "The count of vlan ports being protected under this
|
||||
segment's EAPS domain."
|
||||
::= { extremeEapsSharedPortSegmentEntry 4 }
|
||||
|
||||
extremeEapsSharedPortSegmentAdjId OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..65535)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "The link Id of a neighboring node if the neighbor's
|
||||
shared port instance was in blocking state."
|
||||
::= { extremeEapsSharedPortSegmentEntry 5 }
|
||||
|
||||
extremeEapsSharedPortSegmentRBD OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..65535)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "The Root Blocker Id as determined by the neighboring
|
||||
node's shared port instance."
|
||||
::= { extremeEapsSharedPortSegmentEntry 6 }
|
||||
|
||||
|
||||
extremeEapsSharedPortVlanTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ExtremeEapsSharedPortVlanEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION "This table contains all VLANs protected by the EAPS
|
||||
Shared Port instance."
|
||||
::= { extremeEaps 7 }
|
||||
|
||||
extremeEapsSharedPortVlanEntry OBJECT-TYPE
|
||||
SYNTAX ExtremeEapsSharedPortVlanEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION "An individual entry of this table correlates a EAPS
|
||||
Shared port instance with a VLAN protected by it."
|
||||
INDEX { extremeEapsSharedPortIfIndex,
|
||||
extremeEapsSharedPortVlanName
|
||||
}
|
||||
::= { extremeEapsSharedPortVlanTable 1 }
|
||||
|
||||
ExtremeEapsSharedPortVlanEntry ::= SEQUENCE {
|
||||
extremeEapsSharedPortVlanName DisplayString,
|
||||
extremeEapsSharedPortVlanPortCount INTEGER,
|
||||
extremeEapsSharedPortVlanActiveOpenPort EapsRingPort
|
||||
}
|
||||
|
||||
extremeEapsSharedPortVlanName OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..32))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "The vlan being protected under this EAPS Shared port
|
||||
instance"
|
||||
::= { extremeEapsSharedPortVlanEntry 1 }
|
||||
|
||||
extremeEapsSharedPortVlanPortCount OBJECT-TYPE
|
||||
SYNTAX INTEGER (0..65535)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "The count of vlan ports being protected under this
|
||||
vlan"
|
||||
::= { extremeEapsSharedPortVlanEntry 2 }
|
||||
|
||||
extremeEapsSharedPortVlanActiveOpenPort OBJECT-TYPE
|
||||
SYNTAX EapsRingPort
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "Segment port that is Active Open.
|
||||
If there is no Active open port, then this value is 0."
|
||||
::= { extremeEapsSharedPortVlanEntry 3 }
|
||||
|
||||
extremeEapsSharedPortVlanPortTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ExtremeEapsSharedPortVlanPortEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION "This table contains the EAPS shared port's vlan-port's
|
||||
information"
|
||||
::= { extremeEaps 8 }
|
||||
|
||||
extremeEapsSharedPortVlanPortEntry OBJECT-TYPE
|
||||
SYNTAX ExtremeEapsSharedPortVlanPortEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION "An individual entry of this table describes the EAPS
|
||||
shared port's vlan port information. It will describe the
|
||||
status of the vlan port under its protection."
|
||||
INDEX { extremeEapsSharedPortIfIndex,
|
||||
extremeEapsSharedPortVlanName,
|
||||
extremeEapsSharedPortSegmentPort,
|
||||
extremeEapsName
|
||||
}
|
||||
::= { extremeEapsSharedPortVlanPortTable 1 }
|
||||
|
||||
ExtremeEapsSharedPortVlanPortEntry ::= SEQUENCE {
|
||||
extremeEapsSharedPortVlanPortStatus EapsSharedPortVlanPortStatus
|
||||
}
|
||||
|
||||
extremeEapsSharedPortVlanPortStatus OBJECT-TYPE
|
||||
SYNTAX EapsSharedPortVlanPortStatus
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "The status of a vlan port which is getting protected
|
||||
by an EAPS shared port."
|
||||
::= { extremeEapsSharedPortVlanPortEntry 1 }
|
||||
|
||||
END
|
||||
Reference in New Issue
Block a user