Initial commit
This commit is contained in:
David Leutgeb
433
MIBS/extreme/EXTREME-POE-MIB
Normal file
433
MIBS/extreme/EXTREME-POE-MIB
Normal file
@@ -0,0 +1,433 @@
|
||||
|
||||
-- ============================================================================
|
||||
--
|
||||
-- Extreme Services
|
||||
--
|
||||
|
||||
EXTREME-POE-MIB DEFINITIONS ::= BEGIN
|
||||
IMPORTS
|
||||
MODULE-IDENTITY FROM SNMPv2-SMI
|
||||
OBJECT-TYPE FROM SNMPv2-SMI
|
||||
NOTIFICATION-TYPE FROM SNMPv2-SMI
|
||||
Integer32 FROM SNMPv2-SMI
|
||||
Gauge32 FROM SNMPv2-SMI
|
||||
Counter32 FROM SNMPv2-SMI
|
||||
TruthValue FROM SNMPv2-TC
|
||||
extremeAgent FROM EXTREME-BASE-MIB
|
||||
extremeV2Traps FROM EXTREME-BASE-MIB
|
||||
pethMainPseGroupIndex,
|
||||
pethPsePortGroupIndex,
|
||||
pethPsePortIndex FROM POWER-ETHERNET-MIB;
|
||||
|
||||
|
||||
|
||||
extremePoE MODULE-IDENTITY
|
||||
LAST-UPDATED "0007240000Z"
|
||||
ORGANIZATION "Extreme Networks, Inc."
|
||||
CONTACT-INFO "www.extremenetworks.com"
|
||||
DESCRIPTION "Extreme Power over Ethernet MIB objects"
|
||||
::= { extremeAgent 27 }
|
||||
|
||||
extremePethMain OBJECT IDENTIFIER ::= {extremePoE 1}
|
||||
extremePethPort OBJECT IDENTIFIER ::= {extremePoE 2}
|
||||
-- powerEthernetMIB OBJECT IDENTIFIER ::= {extremePoE 3}
|
||||
extremePethSystem OBJECT IDENTIFIER ::= {extremePoE 4}
|
||||
-- extremePethTraps OBJECT IDENTIFIER ::= {extremeV2Traps 12}
|
||||
|
||||
|
||||
-- extremePethSystem
|
||||
extremePethSystemAdminEnable OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Controls whether inline power is provided by the system."
|
||||
DEFVAL { enable }
|
||||
::= { extremePethSystem 1 }
|
||||
|
||||
extremePethSystemDisconnectPrecedence OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
lowestPriority(1),
|
||||
denyPort(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Controls the disconnect function of power management.
|
||||
When the power drain exceeds the available power budget,
|
||||
due to a rise in power consumption after power is allocated
|
||||
to the ports, the PoE controller disconnects one of the ports
|
||||
to prevent overload on the power supply. There are two controls:
|
||||
Lowest-priority: next port connected causes a shutdown of the
|
||||
lowest priority port.
|
||||
Deny-port: next port is denied power, regardless of priority."
|
||||
DEFVAL { denyPort }
|
||||
::= { extremePethSystem 2 }
|
||||
|
||||
extremePethSystemUsageThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32 (1..99)
|
||||
UNITS "%"
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The usage threshold expressed in percents for
|
||||
comparing the measured power and initiating
|
||||
an alarm if the threshold is exceeded."
|
||||
::= { extremePethSystem 3 }
|
||||
|
||||
extremePethSystemPowerSupplyMode OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
redundant(1),
|
||||
loadSharing(2),
|
||||
notApplicable(3)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Controls whether the power supply operate in
|
||||
redundant or load-sharing mode. Systems which do not
|
||||
provide redundant or load-sharing operations will return
|
||||
an error on setting, and notApplicable on read."
|
||||
::= { extremePethSystem 4 }
|
||||
|
||||
extremePethSystemLegacyEnable OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Controls whether legacy is supported by the system. This is only supported on
|
||||
S300-24 stackables currently."
|
||||
DEFVAL { disable }
|
||||
::= { extremePethSystem 5 }
|
||||
|
||||
|
||||
|
||||
-- Per Slot Table
|
||||
extremePethPseSlotTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ExtremePethPseSlotEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A table of objects that provides power management capabilities per slot."
|
||||
::= { extremePethMain 2 }
|
||||
|
||||
extremePethPseSlotEntry OBJECT-TYPE
|
||||
SYNTAX ExtremePethPseSlotEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A set of objects that display and control the power characteristics of a slot."
|
||||
INDEX { extremePethSlotNumber }
|
||||
::= { extremePethPseSlotTable 1 }
|
||||
|
||||
ExtremePethPseSlotEntry ::= SEQUENCE {
|
||||
extremePethSlotNumber Integer32,
|
||||
extremePethSlotPowerLimit Integer32,
|
||||
extremePethSlotConsumptionPower Gauge32,
|
||||
extremePethSlotClearConnectHistory INTEGER,
|
||||
extremePethSlotReservedConsumptionPower Gauge32,
|
||||
extremePethSlotCommonConsumptionPower Gauge32,
|
||||
extremePethSlotAdminEnable INTEGER,
|
||||
extremePethSlotPoeStatus INTEGER,
|
||||
extremePethSlotPoeResetSystem INTEGER,
|
||||
extremePethSlotMaxAvailPower Gauge32,
|
||||
extremePethSlotMaxCapacity Gauge32,
|
||||
extremePethSlotBackupPSU INTEGER,
|
||||
extremePethSlotPSUActive INTEGER,
|
||||
extremePethSlotMeasuredPower Gauge32,
|
||||
extremePethSlotMainPseIndex Integer32
|
||||
}
|
||||
|
||||
extremePethSlotNumber OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Slot number. This is the same as the Group Index"
|
||||
::= { extremePethPseSlotEntry 1 }
|
||||
|
||||
extremePethSlotPowerLimit OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "watts"
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The configured maximum amount of inline power available to
|
||||
slot. The operational power available to the slot is based
|
||||
upon other operational and configuration parameters, such as
|
||||
the power-supply mode and status. This number is provided by
|
||||
the object extremePethSlotMaxAvailPower. extremePethSlotPowerLimit
|
||||
may be greater than extremePethSlotMaxAvailPower, however, cannot
|
||||
exceed the maximum slot capacity, provided by extremePethSlotMaxCapacity"
|
||||
::= { extremePethPseSlotEntry 2 }
|
||||
|
||||
extremePethSlotConsumptionPower OBJECT-TYPE
|
||||
SYNTAX Gauge32
|
||||
UNITS "watts"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The amount of power allocated to PoE devices on the slot expressed in mWatts.
|
||||
The amount of power allocated to a PoE device is based upon the PoE device
|
||||
class and/or the port's extremePethPortViolationPrecedence setting. For
|
||||
example, in the default configuration of extremePethPortViolationPrecedence
|
||||
set to maxAdvertisedOperator(3), and the extremePethPortOperatorLimit set to
|
||||
15400, a PoE device is allocated 15.4 watts."
|
||||
::= { extremePethPseSlotEntry 3 }
|
||||
|
||||
extremePethSlotClearConnectHistory OBJECT-TYPE
|
||||
SYNTAX INTEGER { set(1),
|
||||
clear(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Clears the port connection history of the specified slot.
|
||||
Reading the value always reurns clear(2)."
|
||||
::= { extremePethPseSlotEntry 4 }
|
||||
|
||||
extremePethSlotReservedConsumptionPower OBJECT-TYPE
|
||||
SYNTAX Gauge32
|
||||
UNITS "Milliwatts"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The amount of reserved power consumed on the slot expressed in Milliwatts."
|
||||
::= { extremePethPseSlotEntry 5 }
|
||||
|
||||
extremePethSlotCommonConsumptionPower OBJECT-TYPE
|
||||
SYNTAX Gauge32
|
||||
UNITS "Milliwatts"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The amount of common power allocated on the slot expressed in Milliwatts.
|
||||
This value is computed by the formula:
|
||||
extremePethSlotConsumptionPower - extremePethSlotReservedConsumptionPower."
|
||||
::= { extremePethPseSlotEntry 6 }
|
||||
|
||||
extremePethSlotAdminEnable OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Controls whether inline power is provided by the slot."
|
||||
DEFVAL { enable }
|
||||
::= { extremePethPseSlotEntry 7 }
|
||||
|
||||
extremePethSlotPoeStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
initializing(1),
|
||||
operational(2),
|
||||
downloadFail(3),
|
||||
calibrationRequired(4),
|
||||
invalidFirmware(5),
|
||||
mismatchVersion(6),
|
||||
updating(7),
|
||||
invalidDevice(8),
|
||||
notOperational(9),
|
||||
other(10)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Describes the status of the PoE system on the slot.
|
||||
initializing - PoE controller is under initialization,
|
||||
operational - PoE controller is operational and is ready or
|
||||
providing power,
|
||||
downloadFail - PoE controller required update and the update
|
||||
failed, PoE reset is required to re-update,
|
||||
calibrationRequired - PoE contoller is operational, however
|
||||
calibration is required to provide power,
|
||||
invalidFirmware - PoE controller contains invalid firmware,
|
||||
mismatchVersion - PoE controller update completed, however
|
||||
version mismatches expected, reboot,
|
||||
updating - PoE controller is being updated,
|
||||
invalidDevice - PoE controller detected an invalid/bad PoE
|
||||
device.
|
||||
notOperational - PoE controller is not yet operational
|
||||
other - PoE controller is in undefined stats."
|
||||
::= { extremePethPseSlotEntry 8 }
|
||||
|
||||
extremePethSlotPoeResetSystem OBJECT-TYPE
|
||||
SYNTAX INTEGER { set(1), clear(2) }
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Resets the PoE system on the slot. Reading returns clear(2)"
|
||||
::= { extremePethPseSlotEntry 9 }
|
||||
|
||||
extremePethSlotMaxAvailPower OBJECT-TYPE
|
||||
SYNTAX Gauge32
|
||||
UNITS "watts"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The maximum power available to the slot expressed in Watts.
|
||||
The value depends on various configuration parameters and
|
||||
power-supply modes and status."
|
||||
::= { extremePethPseSlotEntry 10 }
|
||||
|
||||
extremePethSlotMaxCapacity OBJECT-TYPE
|
||||
SYNTAX Gauge32
|
||||
UNITS "watts"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The maximum capacity of the slot expressed in Watts. This
|
||||
provides the hardware limitation of the slot. Actual
|
||||
amount of power is dependant on system status. The
|
||||
object extremePethSlotPowerLimit must not be greater than
|
||||
this amount."
|
||||
::= { extremePethPseSlotEntry 11 }
|
||||
|
||||
extremePethSlotBackupPSU OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
none(1),
|
||||
internal(2),
|
||||
external(3),
|
||||
notApplicable(4)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "Controls the backup power supply for inline power for the slot.
|
||||
A system which does not allow the backup PSU to be
|
||||
configured will return an error upon setting."
|
||||
::= { extremePethPseSlotEntry 12 }
|
||||
|
||||
extremePethSlotPSUActive OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
none(1),
|
||||
internal(2),
|
||||
external(3)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION "Inline Power supply status indication for the slot. Indicates which PSU
|
||||
is currently active. In the case of a failover a none indication can
|
||||
occur until one of the PSU has finished powering up."
|
||||
::= { extremePethPseSlotEntry 13 }
|
||||
|
||||
extremePethSlotMeasuredPower OBJECT-TYPE
|
||||
SYNTAX Gauge32
|
||||
UNITS "milliwatts"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The measured amount of power for all PoE device on the
|
||||
slot."
|
||||
::= { extremePethPseSlotEntry 14 }
|
||||
|
||||
extremePethSlotMainPseIndex OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The index into the PethMainPseTable. Provides the
|
||||
mapping of the slot identifier to pethMainPseGroupIndex."
|
||||
::= { extremePethPseSlotEntry 15 }
|
||||
|
||||
|
||||
extremePethPsePortTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF ExtremePethPsePortEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A table of objects that extends the standard pethPsePortTable."
|
||||
::= { extremePethPort 1 }
|
||||
|
||||
extremePethPsePortEntry OBJECT-TYPE
|
||||
SYNTAX ExtremePethPsePortEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A set of objects that display and control the power characteristics
|
||||
of a powerEthernet PSE port. This table extends the standard pethPsePortTable."
|
||||
INDEX { pethPsePortGroupIndex, pethPsePortIndex }
|
||||
::= { extremePethPsePortTable 1 }
|
||||
|
||||
ExtremePethPsePortEntry ::= SEQUENCE {
|
||||
extremePethPortOperatorLimit Integer32,
|
||||
extremePethPortReservedBudget Integer32,
|
||||
extremePethPortViolationPrecedence INTEGER,
|
||||
extremePethPortClearFault INTEGER,
|
||||
extremePethPortResetPower INTEGER,
|
||||
extremePethPortMeasuredPower Gauge32
|
||||
}
|
||||
|
||||
extremePethPortOperatorLimit OBJECT-TYPE
|
||||
SYNTAX Integer32 (3000..20000)
|
||||
UNITS "Milliwatts"
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Controls individual port maximum power level."
|
||||
DEFVAL { 15400 }
|
||||
::= { extremePethPsePortEntry 1 }
|
||||
|
||||
extremePethPortReservedBudget OBJECT-TYPE
|
||||
SYNTAX Integer32 (0..20000)
|
||||
UNITS "Milliwatts"
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Controls individual port maximum power level. Value is 0 or
|
||||
in the range of 3000..20000"
|
||||
DEFVAL { 0 }
|
||||
::= { extremePethPsePortEntry 2 }
|
||||
|
||||
extremePethPortViolationPrecedence OBJECT-TYPE
|
||||
SYNTAX INTEGER {advertisedClass(1),
|
||||
operatorLimit(2),
|
||||
maxAdvertisedOperator(3),
|
||||
none(4) }
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Sets the violation precedence for the specified ports. A value of
|
||||
advertised-class will remove/deny power in the case an 802.3af compliant
|
||||
PD consumes power beyond its advertised class limit. A value of
|
||||
operator-limit will remove/deny power should the PD consume power
|
||||
beyond the configured operator-limit. A value of max-class-operator will
|
||||
remove/deny power if the PD consumes power beyond the maximum of the
|
||||
detected class limit and the operator-limit. A value of none will
|
||||
remove/deny power in case the PD device exceeds the maximum allowable
|
||||
wattage according to regulatory maximum of 20 W. Default is
|
||||
max-class-operator which allows operation of both 802.3af compliant and
|
||||
legacy PDs."
|
||||
::= { extremePethPsePortEntry 3 }
|
||||
|
||||
extremePethPortClearFault OBJECT-TYPE
|
||||
SYNTAX INTEGER { set(1), clear(2) }
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Clears the fault condition. Reading always returns clear(2)."
|
||||
::= { extremePethPsePortEntry 4 }
|
||||
|
||||
extremePethPortResetPower OBJECT-TYPE
|
||||
SYNTAX INTEGER { set(1), clear(2) }
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Resets the power on the port. Reading always returns clear(2)"
|
||||
::= { extremePethPsePortEntry 5 }
|
||||
|
||||
extremePethPortMeasuredPower OBJECT-TYPE
|
||||
SYNTAX Gauge32
|
||||
UNITS "Milliwatts"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The amount of power consumed on the port expressed in Milliwatts."
|
||||
::= { extremePethPsePortEntry 6 }
|
||||
|
||||
END
|
||||
Reference in New Issue
Block a user