Initial commit
This commit is contained in:
David Leutgeb
285
MIBS/foundry/FOUNDRY-SN-MAC-VLAN-MIB
Normal file
285
MIBS/foundry/FOUNDRY-SN-MAC-VLAN-MIB
Normal file
@ -0,0 +1,285 @@
|
||||
FOUNDRY-SN-MAC-VLAN-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
IMPORTS
|
||||
MODULE-IDENTITY, OBJECT-TYPE, Integer32
|
||||
FROM SNMPv2-SMI
|
||||
MacAddress
|
||||
FROM SNMPv2-TC
|
||||
InterfaceIndex
|
||||
FROM IF-MIB;
|
||||
|
||||
|
||||
snMacVlan MODULE-IDENTITY
|
||||
LAST-UPDATED "200706250000Z" -- June 25, 2007
|
||||
ORGANIZATION "Foundry Networks, Inc"
|
||||
CONTACT-INFO
|
||||
""
|
||||
DESCRIPTION
|
||||
"Management Information Base module for MAC-based Vlan
|
||||
configuration and statistics."
|
||||
REVISION "200706250000Z" -- June 25, 2007
|
||||
DESCRIPTION
|
||||
""
|
||||
::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) foundry(1991) products(1) switch(1) snSwitch(3) 30 }
|
||||
|
||||
|
||||
--
|
||||
-- Mac-based Vlan
|
||||
--
|
||||
|
||||
snMacVlanGlobalObjects OBJECT IDENTIFIER ::= { snMacVlan 1 }
|
||||
snMacVlanTableObjects OBJECT IDENTIFIER ::= { snMacVlan 2 }
|
||||
|
||||
--
|
||||
-- MAC-based VLAN Global Scalar Object Section
|
||||
--
|
||||
|
||||
snMacVlanGlobalClearOper OBJECT-TYPE
|
||||
SYNTAX INTEGER { valid(0), clear(1) }
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"valid(0) - a SNMP-GET of this mib shows that it is valid command to use.
|
||||
clear(1) - represents clear operational MAC-based Vlan entry for all ports."
|
||||
::= { snMacVlanGlobalObjects 1 }
|
||||
|
||||
snMacVlanGlobalDynConfigState OBJECT-TYPE
|
||||
SYNTAX INTEGER { disabled(0), enabled(1) }
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Enable/disable MAC-based VLAN dynamic activation on the global level."
|
||||
::= { snMacVlanGlobalObjects 2}
|
||||
|
||||
--
|
||||
-- MAC-based VLAN Table Object Section
|
||||
--
|
||||
|
||||
--
|
||||
-- MAC-based Vlan Port Membership Table
|
||||
-- Use this table to create or delete a port to a MAC-based Vlan
|
||||
--
|
||||
|
||||
snMacVlanPortMemberTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF SnMacVlanPortMemberEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"MAC-based Vlan port membership table."
|
||||
::= { snMacVlanTableObjects 1 }
|
||||
|
||||
snMacVlanPortMemberEntry OBJECT-TYPE
|
||||
SYNTAX SnMacVlanPortMemberEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An entry of the MAC-based Vlan port membership table."
|
||||
INDEX { snMacVlanPortMemberVLanId, snMacVlanPortMemberPortId }
|
||||
::= { snMacVlanPortMemberTable 1 }
|
||||
|
||||
SnMacVlanPortMemberEntry ::= SEQUENCE {
|
||||
snMacVlanPortMemberVLanId INTEGER,
|
||||
snMacVlanPortMemberPortId InterfaceIndex,
|
||||
snMacVlanPortMemberRowStatus INTEGER
|
||||
}
|
||||
|
||||
snMacVlanPortMemberVLanId OBJECT-TYPE
|
||||
SYNTAX INTEGER (1..4095)
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The VLAN identifier (VLAN ID)."
|
||||
::= { snMacVlanPortMemberEntry 1 }
|
||||
|
||||
snMacVlanPortMemberPortId OBJECT-TYPE
|
||||
SYNTAX InterfaceIndex
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The ifIndex which is a member of the MAC-based VLAN."
|
||||
::= { snMacVlanPortMemberEntry 2 }
|
||||
|
||||
snMacVlanPortMemberRowStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
other(1),
|
||||
valid(2),
|
||||
delete(3),
|
||||
create(4)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object is used to create and
|
||||
delete row in the table and control
|
||||
if they are used. The values
|
||||
that can be written are:
|
||||
delete(3)...deletes the row
|
||||
create(4)...creates a new row
|
||||
|
||||
If the row exists, then a SET with
|
||||
value of create(4) returns error
|
||||
'wrongValue'. Deleted rows go away
|
||||
immediately. The following values
|
||||
can be returned on reads:
|
||||
noSuch(0)...no such row
|
||||
other(1)....some other case
|
||||
valid(2)....the row exists and is valid"
|
||||
::= { snMacVlanPortMemberEntry 3 }
|
||||
|
||||
--
|
||||
-- MAC-based VLAN Interface Table Object Section
|
||||
--
|
||||
|
||||
snMacVlanIfTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF SnMacVlanIfEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"MAC-based Vlan Interface table."
|
||||
::= { snMacVlanTableObjects 2 }
|
||||
|
||||
snMacVlanIfEntry OBJECT-TYPE
|
||||
SYNTAX SnMacVlanIfEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An entry in the MAC-based Vlan interface table."
|
||||
INDEX { snMacVlanIfIndex }
|
||||
::= { snMacVlanIfTable 1 }
|
||||
|
||||
SnMacVlanIfEntry ::= SEQUENCE {
|
||||
snMacVlanIfIndex InterfaceIndex,
|
||||
snMacVlanIfEnable INTEGER,
|
||||
snMacVlanIfMaxEntry Integer32,
|
||||
snMacVlanIfClearOper INTEGER,
|
||||
snMacVlanIfClearConfig INTEGER
|
||||
}
|
||||
|
||||
snMacVlanIfIndex OBJECT-TYPE
|
||||
SYNTAX InterfaceIndex
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The ifIndex which is a member of the MAC-based VLAN."
|
||||
::= { snMacVlanIfEntry 1 }
|
||||
|
||||
snMacVlanIfEnable OBJECT-TYPE
|
||||
SYNTAX INTEGER { disabled(0), enabled(1) }
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The administrative status requested by management for
|
||||
MAC-based Vlan on this interface. The value enabled(1)
|
||||
indicates that MAC-based Vlan should be enabled on this interface,
|
||||
When disabled(2), MAC-based Vlan is disabled on this interface.
|
||||
Enable/disable MAC-based Vlan on this interface."
|
||||
::= { snMacVlanIfEntry 2 }
|
||||
|
||||
snMacVlanIfMaxEntry OBJECT-TYPE
|
||||
SYNTAX Integer32 (2..32)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The maximum number of allowed and denied MAC address
|
||||
(static and dynamic) that can be leared on an interface.
|
||||
The default value is 2. The value should be between 2 to 32."
|
||||
DEFVAL { 2 }
|
||||
::= { snMacVlanIfEntry 3 }
|
||||
|
||||
snMacVlanIfClearOper OBJECT-TYPE
|
||||
SYNTAX INTEGER { valid(0), clear(1) }
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"valid(0) - a SNMP-GET of this mib shows that it is valid command to use.
|
||||
clear(1) - represents clearing operational MAC-based Vlan entry for a port."
|
||||
::= { snMacVlanIfEntry 4 }
|
||||
|
||||
snMacVlanIfClearConfig OBJECT-TYPE
|
||||
SYNTAX INTEGER { valid(0), clear(1) }
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"valid(0) - a SNMP-GET of this mib shows that it is valid command to use.
|
||||
clear(1) - represents clearing configured MAC-based Vlan entry for a port."
|
||||
::= { snMacVlanIfEntry 5 }
|
||||
|
||||
--
|
||||
-- MAC-based Vlan Table Object section
|
||||
--
|
||||
|
||||
snMacBasedVlanTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF SnMacBasedVlanEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"MAC-based Vlan table."
|
||||
::= { snMacVlanTableObjects 3 }
|
||||
|
||||
snMacBasedVlanEntry OBJECT-TYPE
|
||||
SYNTAX SnMacBasedVlanEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An entry in the MAC-based Vlan table."
|
||||
INDEX { snMacVlanIfIndex, snMacBasedVlanId, snMacBasedVlanMac }
|
||||
::= { snMacBasedVlanTable 1 }
|
||||
|
||||
SnMacBasedVlanEntry ::= SEQUENCE {
|
||||
snMacBasedVlanId INTEGER,
|
||||
snMacBasedVlanMac MacAddress,
|
||||
snMacBasedVlanPriority Integer32,
|
||||
snMacBasedVlanRowStatus INTEGER
|
||||
}
|
||||
|
||||
snMacBasedVlanId OBJECT-TYPE
|
||||
SYNTAX INTEGER (1..4095)
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The ID of a VLAN of which this port is a mac-vlan-permit
|
||||
member. Port must be untagged. This object return 0 which is
|
||||
an invalid VLAN ID value."
|
||||
::= { snMacBasedVlanEntry 1 }
|
||||
|
||||
snMacBasedVlanMac OBJECT-TYPE
|
||||
SYNTAX MacAddress
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A host source MAC address to be authenticated."
|
||||
::= { snMacBasedVlanEntry 2 }
|
||||
|
||||
snMacBasedVlanPriority OBJECT-TYPE
|
||||
SYNTAX Integer32 (0..7)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The priority of the source MAC address."
|
||||
::= { snMacBasedVlanEntry 3 }
|
||||
|
||||
snMacBasedVlanRowStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
other(1),
|
||||
valid(2),
|
||||
delete(3),
|
||||
create(4)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object is used to create and delete row in the
|
||||
table and control if they are used. The values that
|
||||
can be written are:
|
||||
delete(3)...deletes the row
|
||||
create(4)...creates a new row
|
||||
|
||||
If the row exists, then a SET with value of create(4)
|
||||
returns error 'wrongValue'. Deleted rows go away immediately.
|
||||
The following values can be returned on reads:
|
||||
noSuchName...no such row
|
||||
other(1).....some other cases
|
||||
valid(2)....the row exists and is valid"
|
||||
::= { snMacBasedVlanEntry 4 }
|
||||
|
||||
END
|
||||
Reference in New Issue
Block a user