david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Initial commit

Browse Source
This commit is contained in:
David Leutgeb
2023-12-05 12:25:34 +01:00
commit 98a672123c
4378 changed files with 8817503 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

407
MIBS/junos/JUNIPER-ANALYZER-MIB Normal file
View File

@ -0,0 +1,407 @@
JUNIPER-ANALYZER-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
FROM SNMPv2-SMI
TruthValue, DisplayString
FROM SNMPv2-TC
jnxExAnalyzer
FROM JUNIPER-EX-SMI;
jnxAnalyzerMIB MODULE-IDENTITY
LAST-UPDATED "201407170000Z"
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
" Juniper Technical Assistance Center
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION
"This is Juniper Networks' implementation of enterprise specific
MIB for Analyzer and Remote Analyzer. Port mirroring is widely
used in enterprise switches to send a copy of all or sampled
packets seen on a port to an anlyzer on the same or different
switch."
REVISION
"200808010000Z" -- Fri Aug 01 00:00:00 2008 UTC
DESCRIPTION
"Initial version"
REVISION
"200904220000Z" -- Wed April 22 00:00:00 2009 UTC
DESCRIPTION
"Marking jnxAnalyzerStatus as deprecated"
REVISION
"201007300000Z" -- Fri July 30 00:00:00 2009 UTC
DESCRIPTION
"Marking deprecated OIDs as obsolete"
REVISION
"201407170000Z" -- THU July 17 00:00:00 2014 UTC
DESCRIPTION
"Rectifying typo errors from 'Anlayzer' to 'Analyzer'"
::= { jnxExAnalyzer 1 }
jnxAnalyzerMIBObjects OBJECT IDENTIFIER ::= { jnxAnalyzerMIB 1 }
-- The Analyzer Table
jnxAnalyzerTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxAnalyzerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Network traffic passing through ports is analyzed by sending a
copy of the traffic to another port on the same or different switch.
This table contains the analyzer parameters."
::= { jnxAnalyzerMIBObjects 1 }
jnxAnalyzerEntry OBJECT-TYPE
SYNTAX JnxAnalyzerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row instance contains the Analyzer Name, Analyzer Status, Mirroring
Ratio, Loss Priority."
INDEX { jnxAnalyzerName }
::= { jnxAnalyzerTable 1 }
JnxAnalyzerEntry ::=
SEQUENCE {
jnxAnalyzerName DisplayString,
jnxAnalyzerStatus TruthValue,
jnxMirroringRatio Unsigned32,
jnxLossPriority INTEGER
}
jnxAnalyzerName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies a unique Analyzer configured on the switch."
::= { jnxAnalyzerEntry 1 }
jnxAnalyzerStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object identifies whether the mirroring associated with a
particular analyzer is enabled or disabled."
::= { jnxAnalyzerEntry 2 }
jnxMirroringRatio OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object will specify the mirroring ratio. User can configure
the analyzer to mirror only one out of X packets [1:X packets] in
the ingress/egress side based on whether the port is configured for
ingress or egress mirroring. The configuration supports a range from
1: X [0 <= X <= 2047].Default value is 1."
DEFVAL { 1 }
::= { jnxAnalyzerEntry 3 }
jnxLossPriority OBJECT-TYPE
SYNTAX INTEGER {
low (0),
high (1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The analyzer port may be congested when the number of
packets exceeds the bandwidth of the analyzer port. So the
loss-priority parameter is enabled. The switched packets
will not get affected by this. The value 0 corresponds to low
priority.The value 1 corresponds to high loss priority. "
::= { jnxAnalyzerEntry 4 }
-- The ANALYZER INPUT Table
jnxAnalyzerInputTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxAnalyzerInputEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An analyzer Session is an association of several source ports to
a destination port.A range or series of ports can be mirrored in
a session."
::= { jnxAnalyzerMIBObjects 2 }
jnxAnalyzerInputEntry OBJECT-TYPE
SYNTAX JnxAnalyzerInputEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An Entry is created for each Input Source port."
INDEX { jnxAnalyzerName, jnxAnalyzerInputValue }
::= { jnxAnalyzerInputTable 1 }
JnxAnalyzerInputEntry ::=
SEQUENCE {
jnxAnalyzerInputValue DisplayString,
jnxAnalyzerInputOption INTEGER,
jnxAnalyzerInputType INTEGER
}
jnxAnalyzerInputValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This identifies each different analyzer input source.
If the value of jnxAnalyzerInputType is 1 then jnxAnalyzerInputValue
refers to the input source Interface Name.
If the value of jnxAnalyzerInputType is 2 then jnxAnalyzerInputValue
refers to the input source vlan name."
::= { jnxAnalyzerInputEntry 1 }
jnxAnalyzerInputOption OBJECT-TYPE
SYNTAX INTEGER {
ingress (1),
egress (2)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"A source port is a switch port that is been mirrored. It can be
mirrored based either on Ingress(received) traffic or egress
(transmitted) traffic.
The goal of receive (or ingress) Analyzer is to monitor as much as
possible all the packets received by the source interface. The amount
of received packets mirrored to the destination port depends on the
mirroring ratio. A series or range of ingress ports can be mirrored
in an analyzer session.
The goal of transmit (or egress) analyzer is to monitor as much as
possible all the packets sent by the source interface. The amount
of egress packets mirrored to the destination port depends on the
mirroring ratio.The copy is provided after the packet is modified.
A range of egress ports can be mirrored in an analyzer session.
The value 1 corresponds to mirroring ingress traffic. The value 2
corresponds to mirroring egress traffic."
::= { jnxAnalyzerInputEntry 2 }
jnxAnalyzerInputType OBJECT-TYPE
SYNTAX INTEGER {
interface (1),
vlanname (2)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"This specifies whether interfaces or VLANs is mirrored.
Mirroring can be done on the basis of the interface name.All packets
received on a port configured for ingress mirroring is sent to the
analyzer port.All packets sent out on a port configured for egress
mirroring is sent to the analyzer port.Any number of network ports
can be configured for ingress or egress mirroring.The value one of
jnxAnalayzerInputType corresponds to mirroring the interface traffic.
On a particular switch, the user can choose to monitor all the ports
that belong to a particular VLAN. It is needed in order to analyze
the network traffic in one or more VLANs.Mirroring can be configured
in ingress direction only for VLAN.
Mirroring can be done on the basis of VLAN name (supported only in
ingress). All packets received on a particular VLAN are sent out to
the analyzer.The value two of jnxAnalyzerInputType corresponds to
mirroring vlan traffic."
::= { jnxAnalyzerInputEntry 3 }
-- The ANALYZER OUTPUT Table
jnxAnalyzerOutputTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxAnalyzerOutputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the destination port to which the traffic from
the source ports are copied."
::= { jnxAnalyzerMIBObjects 3 }
jnxAnalyzerOutputEntry OBJECT-TYPE
SYNTAX JnxAnalyzerOutputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An Entry is created for each destination port or destination vlan."
INDEX { jnxAnalyzerName, jnxAnalyzerOutputValue }
::= { jnxAnalyzerOutputTable 1 }
JnxAnalyzerOutputEntry ::=
SEQUENCE {
jnxAnalyzerOutputValue DisplayString,
jnxAnalyzerOutputType INTEGER
}
jnxAnalyzerOutputValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies each different destination port or
destination vlan.
If the value of jnxAnalyzerOutputType is 1 then jnxAnalyzerOutputValue
gives the destination interface name.
If the value of jnxAnalyzerOutputType is 2 then jnxAnalyzerOutputValue
gives the destination vlan name."
::= { jnxAnalyzerOutputEntry 1 }
jnxAnalyzerOutputType OBJECT-TYPE
SYNTAX INTEGER {
interface (1),
vlanname (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination port can be on the same switch or on a different
switch(Remote Analyzer).
Value 1 specifies that the destination interface is on the same
switch and it receives a copy of traffic from the source ports.
The port does not transmit any traffic except that required for
the analyzer session.
The traffic for each Remote Analyzer session is carried over a
user-specified Remote Analyzer VLAN that is dedicated for that
Remote Analyzer session in all participating switches. A special
vlan is confgiured exclusively for remote mirroring by marking it
as analyzer vlan. Intermediate switches will have a few ports
(minimum of 2 ports )as members of the analyzer vlan. These
are the trunk ports which act as the link between the switches.
The analyzer ports on the destination switch are also added to
the Analyzer VLAN.
Value 2 specifies that the traffic from all the source ports is
copied into the Remote Analyzer vlan specified by the vlan name.
In the source switch the analyzer session destination is given
as the analyzer vlan. In the intermediate switches the analyzer
sessions have the source and the destination as the analyzer vlan.
The packet will reach the destination ports as it will be a part
of the analyzer vlan."
::= { jnxAnalyzerOutputEntry 2 }
-- jnxExAnalyzerInputTable Table
jnxExAnalyzerInputTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxExAnalyzerInputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An analyzer Session is an association of several source ports to
a destination port.A range or series of ports can be mirrored in
a session."
::= { jnxAnalyzerMIBObjects 4 }
jnxExAnalyzerInputEntry OBJECT-TYPE
SYNTAX JnxExAnalyzerInputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An Entry is created for each Input Source port."
INDEX { jnxAnalyzerName, jnxExAnalyzerInputOption, jnxExAnalyzerInputValue }
::= { jnxExAnalyzerInputTable 1 }
JnxExAnalyzerInputEntry ::=
SEQUENCE {
jnxExAnalyzerInputOption INTEGER,
jnxExAnalyzerInputValue DisplayString,
jnxExAnalyzerInputType INTEGER
}
jnxExAnalyzerInputOption OBJECT-TYPE
SYNTAX INTEGER {
ingress (1),
egress (2),
vlan (3),
egress-vlan (4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A source port is a switch port that is been mirrored. It can be
mirrored based either on Ingress(received) traffic or egress
(transmitted) traffic.
The goal of receive (or ingress) Analyzer is to monitor as much as
possible all the packets received by the source interface. The amount
of received packets mirrored to the destination port depends on the
mirroring ratio. A series or range of ingress ports can be mirrored
in an analyzer session.
The goal of transmit (or egress) analyzer is to monitor as much as
possible all the packets sent by the source interface. The amount
of egress packets mirrored to the destination port depends on the
mirroring ratio.The copy is provided after the packet is modified.
A range of egress ports can be mirrored in an analyzer session.
The value 1 corresponds to mirroring ingress traffic. The value 2
corresponds to mirroring egress traffic. The value 3 corresponds to
mirroring vlan ingress traffic. The value 4 corresponds to mirroring
vlan egress traffic."
::= { jnxExAnalyzerInputEntry 1 }
jnxExAnalyzerInputValue OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This identifies each different analyzer input source.
If the value of jnxExAnalyzerInputType is 1 then jnxExAnalyzerInputValue
refers to the input source Interface Name.
If the value of jnxExAnalyzerInputType is 2 then jnxExAnalyzerInputValue
refers to the input source vlan name."
::= { jnxExAnalyzerInputEntry 2 }
jnxExAnalyzerInputType OBJECT-TYPE
SYNTAX INTEGER {
interface (1),
vlanname (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies whether interfaces or VLANs is mirrored.
Mirroring can be done on the basis of the interface name.All packets
received on a port configured for ingress mirroring is sent to the
analyzer port.All packets sent out on a port configured for egress
mirroring is sent to the analyzer port.Any number of network ports
can be configured for ingress or egress mirroring.The value one of
jnxAnalyzerInputType corresponds to mirroring the interface traffic.
On a particular switch, the user can choose to monitor all the ports
that belong to a particular VLAN. It is needed in order to analyze
the network traffic in one or more VLANs.Mirroring can be configured
in ingress direction only for VLAN.
Mirroring can be done on the basis of VLAN name (supported only in
ingress). All packets received on a particular VLAN are sent out to
the analyzer.The value two of jnxExAnalyzerInputType corresponds to
mirroring vlan traffic."
::= { jnxExAnalyzerInputEntry 3 }
END