Initial commit
This commit is contained in:
David Leutgeb
393
MIBS/junos/JUNIPER-SECURE-ACCESS-PORT-MIB
Normal file
393
MIBS/junos/JUNIPER-SECURE-ACCESS-PORT-MIB
Normal file
@@ -0,0 +1,393 @@
|
||||
JUNIPER-SECURE-ACCESS-PORT-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
IMPORTS
|
||||
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32,
|
||||
NOTIFICATION-TYPE, Integer32
|
||||
FROM SNMPv2-SMI
|
||||
|
||||
TruthValue, TEXTUAL-CONVENTION, DisplayString
|
||||
FROM SNMPv2-TC
|
||||
|
||||
ifIndex
|
||||
FROM IF-MIB
|
||||
|
||||
jnxExSecureAccessPort
|
||||
FROM JUNIPER-EX-SMI;
|
||||
|
||||
jnxExSecureAccessPortMIB MODULE-IDENTITY
|
||||
LAST-UPDATED "200705151000Z"
|
||||
ORGANIZATION "Juniper Networks, Inc."
|
||||
CONTACT-INFO
|
||||
" Juniper Technical Assistance Center
|
||||
Juniper Networks, Inc.
|
||||
1133 Innovation Way
|
||||
Sunnyvale, CA 94089
|
||||
E-mail: support@juniper.net"
|
||||
|
||||
DESCRIPTION
|
||||
"This is Juniper Networks' implementation of enterprise specific
|
||||
MIB for configuration of Secure Access Port feature. DHCP Snooping
|
||||
and Dynamic ARP Inspection are mechanisms to provide per interface
|
||||
security capabilities. This MIB Module is also used to control
|
||||
some layer 2 functions like MAC limiting. It also supports
|
||||
IP Source Guard, Mac Source Guard and Storm Control features."
|
||||
::= { jnxExSecureAccessPort 1 }
|
||||
|
||||
|
||||
jnxSecAccessPortMIBNotifications
|
||||
OBJECT IDENTIFIER ::= { jnxExSecureAccessPortMIB 0 }
|
||||
jnxSecAccessPortMIBObjects
|
||||
OBJECT IDENTIFIER ::= { jnxExSecureAccessPortMIB 1 }
|
||||
|
||||
-- TEXTUAL-CONVENTION
|
||||
|
||||
JnxMacLimitExceededAction ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"One of the following action will be taken by the system
|
||||
on an interface, when the system detects the current learned
|
||||
number of MAC addresses in the forwarding table has exceeded
|
||||
the limit number of MAC address.
|
||||
|
||||
none : No action will be taken. It means Mac limit is not
|
||||
enabled in the specified interface.
|
||||
|
||||
drop : The notification will be generated when MAC limit is
|
||||
exceeded and also the MAC limit is enforced for the interface.
|
||||
The new address will not be learned in the entity and also the
|
||||
traffic with new address will not be flooded in the entity.
|
||||
The learning will be re-enabled in the interface if the number
|
||||
of MAC addresses falls below the limit.
|
||||
|
||||
alarm : A notification will be generated if the Mac Limit is
|
||||
exceeded.
|
||||
|
||||
shutdown : The notification will be generated as the Mac Limit is
|
||||
exceeded. The interface will be moved to blocked state, no traffic
|
||||
will be allowed in the entity. The traffic will be re-enabled in
|
||||
the interface if the number of MAC addresses falls below the limit."
|
||||
SYNTAX INTEGER {
|
||||
none (1),
|
||||
drop (2),
|
||||
alarm (3),
|
||||
shutdown (4)
|
||||
}
|
||||
|
||||
-- The Port Security Table for Vlan
|
||||
|
||||
jnxSecAccessPortVlanTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF JnxSecAccessPortVlanEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A table provides the mechanism to control DHCP Snooping
|
||||
and Dynamic ARP Inspection per VLAN. When a VLAN is created
|
||||
in a device supporting this table, a corresponding entry will
|
||||
be added to this table."
|
||||
::= { jnxSecAccessPortMIBObjects 1 }
|
||||
|
||||
jnxSecAccessPortVlanEntry OBJECT-TYPE
|
||||
SYNTAX JnxSecAccessPortVlanEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A row instance contains whether DHCP Snooping and Dynamic
|
||||
ARP Inspection at each existing VLAN is enabled or disabled."
|
||||
INDEX { jnxSecAccessVlanName }
|
||||
::= { jnxSecAccessPortVlanTable 1 }
|
||||
|
||||
JnxSecAccessPortVlanEntry ::= SEQUENCE {
|
||||
jnxSecAccessVlanName DisplayString,
|
||||
jnxSecAccessVlanDhcpSnoopStatus TruthValue,
|
||||
jnxSecAccessVlanDAIStatus TruthValue
|
||||
}
|
||||
|
||||
jnxSecAccessVlanName OBJECT-TYPE
|
||||
SYNTAX DisplayString (SIZE(0..255))
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates the VLAN name on which Dhcp Snooping
|
||||
feature and Dynamic ARP Inspection is enabled."
|
||||
::= { jnxSecAccessPortVlanEntry 1 }
|
||||
|
||||
jnxSecAccessVlanDhcpSnoopStatus OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates whether Dhcp Snooping is
|
||||
enabled in this VLAN.
|
||||
|
||||
If this object is 'true', Dhcp Snooping is enabled in the
|
||||
specified VLAN.
|
||||
|
||||
If this object is 'false', Dhcp Snooping is disabled in the
|
||||
specified VLAN."
|
||||
::= { jnxSecAccessPortVlanEntry 2 }
|
||||
|
||||
jnxSecAccessVlanDAIStatus OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates whether Dynamic ARP Inspection is
|
||||
enabled in this VLAN.
|
||||
|
||||
If this object is 'true', Dynamic ARP Inspection is enabled.
|
||||
|
||||
If this object is 'false', Dynamic ARP Inspection is disabled."
|
||||
::= { jnxSecAccessPortVlanEntry 3 }
|
||||
|
||||
|
||||
-- The Port Security Table for Interface
|
||||
|
||||
jnxSecAccessPortIfTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF JnxSecAccessPortIfEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The table contains the trust state and rate limit of each interface
|
||||
for DHCP Snooping purpose. The table also contains information on MAC
|
||||
address limit feature for each interface capable of this feature.
|
||||
This table also specifies whether IP source guard and MAC source
|
||||
guard are enabled on each interface."
|
||||
::= { jnxSecAccessPortMIBObjects 2 }
|
||||
|
||||
jnxSecAccessPortIfEntry OBJECT-TYPE
|
||||
SYNTAX JnxSecAccessPortIfEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A table entry contains the trust state and rate limit of an
|
||||
interface, MAC address limit for that Interface. It also contains
|
||||
the action to be undertaken if MAC address limit is exceeded. A table
|
||||
entry specifies whether IP source guard and MAC source guard are enabled
|
||||
on the specified interface."
|
||||
INDEX { ifIndex }
|
||||
::= { jnxSecAccessPortIfTable 1 }
|
||||
|
||||
JnxSecAccessPortIfEntry ::=
|
||||
SEQUENCE {
|
||||
jnxSecAccessdsIfTrustState TruthValue,
|
||||
jnxSecAccessdsIfRateLimit Unsigned32,
|
||||
jnxSecAccessIfMacLimit Unsigned32,
|
||||
jnxSecAccessIfMacLimitExceed JnxMacLimitExceededAction,
|
||||
jnxSecAccessIfIpSrcGuardStatus TruthValue,
|
||||
jnxSecAccessIfMacSrcGuardStatus TruthValue
|
||||
}
|
||||
|
||||
|
||||
jnxSecAccessdsIfTrustState OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates whether the interface is trusted for
|
||||
DHCP Snooping purpose.
|
||||
|
||||
If this object is 'true', the interface is trusted.
|
||||
DHCP packets coming to this interface will be forwarded without
|
||||
checking.
|
||||
|
||||
If this object is 'false', the interface is not trusted. DHCP
|
||||
packets coming to this interface will be subjected to DHCP checks."
|
||||
::= { jnxSecAccessPortIfEntry 1 }
|
||||
|
||||
jnxSecAccessdsIfRateLimit OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
UNITS "packets per second"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates rate limit value for DHCP Snooping purpose.
|
||||
If the value of this object is 0, no rate limit is applied for DHCP
|
||||
traffic at this interface."
|
||||
::= { jnxSecAccessPortIfEntry 2 }
|
||||
|
||||
jnxSecAccessIfMacLimit OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies the threshold limit for the number of
|
||||
MAC address entries on this interface.
|
||||
|
||||
When the instance value of this object is set to 0, no threshold
|
||||
limit will be applied for this interfacew and the
|
||||
corresponding instance value of jnxIfMacLimitExceedAction
|
||||
of the same row has no effect."
|
||||
DEFVAL { 5 }
|
||||
::= { jnxSecAccessPortIfEntry 3 }
|
||||
|
||||
jnxSecAccessIfMacLimitExceed OBJECT-TYPE
|
||||
SYNTAX JnxMacLimitExceededAction
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies the action to be taken by the system for this
|
||||
interface while the number of MAC addresses has exceeded the value
|
||||
of jnxIfMacLimit.
|
||||
|
||||
This object value is only effective when the corresponding instance
|
||||
value of jnxIfMacLimit is not set to 0."
|
||||
::= { jnxSecAccessPortIfEntry 4 }
|
||||
|
||||
jnxSecAccessIfIpSrcGuardStatus OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates whether IP Source Guard is enabled on
|
||||
the specified interface.
|
||||
|
||||
If this object is 'true', then IP Source Guard is enabled on the
|
||||
specified interface.
|
||||
|
||||
If this object is 'false', then IP Source Guard is disabled on
|
||||
the specified interface."
|
||||
::= { jnxSecAccessPortIfEntry 5 }
|
||||
|
||||
jnxSecAccessIfMacSrcGuardStatus OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates whether Mac Source Guard is enabled on
|
||||
the specified interface.
|
||||
|
||||
If this object is 'true', then Mac Source Guard is enabled on the
|
||||
specified interface.
|
||||
|
||||
If this object is 'false', then IP Source Guard is disabled on
|
||||
the specified interface."
|
||||
::= { jnxSecAccessPortIfEntry 6 }
|
||||
|
||||
|
||||
-- Storm Control Table
|
||||
|
||||
jnxStormCtlTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF JnxStormCtlEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Storm control monitors each type of traffic level on an interface.
|
||||
If traffic level exceeds the threshold value(rising threshold),
|
||||
switch will drop all packets of that type until traffic level drops
|
||||
to the threshold level (falling threshold). If traffic rate for a
|
||||
particular type exceeds the rising threshold, action will be taken
|
||||
to shutdown or add configured filter on the port.
|
||||
|
||||
This table describes the traffic type for each interface, the rising
|
||||
threshold, falling threshold and the action to be taken if the traffic
|
||||
exceeds the rising threshold."
|
||||
::= { jnxSecAccessPortMIBObjects 3 }
|
||||
|
||||
jnxStormCtlEntry OBJECT-TYPE
|
||||
SYNTAX JnxStormCtlEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An entry contains the interface index,traffic type for the interface,
|
||||
the rising threshold, falling threshold and the action to be taken
|
||||
if the traffic exceeds the rising threshold."
|
||||
INDEX {ifIndex, jnxStormCtlIfTrafficType }
|
||||
::= { jnxStormCtlTable 1 }
|
||||
|
||||
JnxStormCtlEntry ::= SEQUENCE {
|
||||
jnxStormCtlIfTrafficType INTEGER,
|
||||
jnxStormCtlRisingThreshold Integer32,
|
||||
jnxStormCtlFallingThreshold Integer32,
|
||||
jnxStormCtlAction INTEGER
|
||||
}
|
||||
|
||||
jnxStormCtlIfTrafficType OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
broadcast(1),
|
||||
multicast(2),
|
||||
unicast (3)
|
||||
}
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies the traffic type on the particular
|
||||
interface. Value 1 specifies that it is broadcast traffic,
|
||||
value 2 specifies that it is multicast traffic and
|
||||
value 3 specifies that it is unicast traffic."
|
||||
::= { jnxStormCtlEntry 1 }
|
||||
|
||||
jnxStormCtlRisingThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "packets per second"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies the rising threshold value in packets
|
||||
per second. The storm control action is occurs when the traffic
|
||||
exceeds this threshold value."
|
||||
::= { jnxStormCtlEntry 2 }
|
||||
|
||||
jnxStormCtlFallingThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
UNITS "packets per second"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies the falling threshold value in packets
|
||||
per second. The storm control action ceases when the traffic
|
||||
drops to this threshold value."
|
||||
::= { jnxStormCtlEntry 3 }
|
||||
|
||||
jnxStormCtlAction OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
shutdown(1),
|
||||
filter (2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies the action to be taken, when traffic exceeds
|
||||
rising threshold value. Value 1 specifies that the action taken is
|
||||
to shutdown the port. Value 2 specifies that the action taken is to
|
||||
apply a policy filter on the interface for the given packet type.
|
||||
Default is to shutdown(1) the port."
|
||||
DEFVAL { 1 }
|
||||
::= { jnxStormCtlEntry 4 }
|
||||
|
||||
|
||||
-- Definition of DHCP Snooping notifications
|
||||
|
||||
jnxSecAccessdsRateLimitCrossed NOTIFICATION-TYPE
|
||||
OBJECTS { jnxSecAccessdsIfRateLimit }
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A jnxdsRateLimitCrossed notification is generated when
|
||||
the number of DHCP packets from an untrusted interface exceeds
|
||||
jnxSecAccessdsIfRateLimit."
|
||||
::= { jnxSecAccessPortMIBNotifications 1 }
|
||||
|
||||
-- Definition of MAC Limit Exceeded Notification
|
||||
|
||||
jnxSecAccessIfMacLimitExceeded NOTIFICATION-TYPE
|
||||
OBJECTS { jnxSecAccessIfMacLimit, jnxSecAccessIfMacLimitExceed }
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Notification is sent when the number of MAC addresses learnt by
|
||||
the interface has crossed the limit of MAC addresses(jnxSecAccessIfMacLimit)
|
||||
and if MAC Limit Exceeded Action(jnxSecAccessIfMacLimitExceed) is
|
||||
drop or alarm or shutdown."
|
||||
::= { jnxSecAccessPortMIBNotifications 2 }
|
||||
|
||||
-- Definition of Storm Event Notification
|
||||
|
||||
jnxStormEventNotification NOTIFICATION-TYPE
|
||||
OBJECTS { jnxStormCtlRisingThreshold }
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Notification is sent when the traffic in the interface exceeds
|
||||
rising threshold(jnxStormCtlRisingThreshold)."
|
||||
::= { jnxSecAccessPortMIBNotifications 3 }
|
||||
END
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user