Initial commit
This commit is contained in:
David Leutgeb
799
MIBS/junos/VPLS-GENERIC-DRAFT-01-MIB
Normal file
799
MIBS/junos/VPLS-GENERIC-DRAFT-01-MIB
Normal file
@@ -0,0 +1,799 @@
|
||||
VPLS-GENERIC-DRAFT-01-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
IMPORTS
|
||||
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
||||
Unsigned32, Counter32, transmission
|
||||
FROM SNMPv2-SMI -- RFC2578
|
||||
|
||||
OBJECT-GROUP, NOTIFICATION-GROUP
|
||||
FROM SNMPv2-CONF -- RFC2580
|
||||
|
||||
TruthValue, RowStatus, StorageType, TEXTUAL-CONVENTION
|
||||
FROM SNMPv2-TC -- RFC2579
|
||||
|
||||
SnmpAdminString
|
||||
FROM SNMP-FRAMEWORK-MIB -- RFC3411
|
||||
|
||||
jnxExperiment
|
||||
FROM JUNIPER-SMI
|
||||
|
||||
-- PwIndexType
|
||||
-- FROM PW-TC-STD-MIB
|
||||
|
||||
VPNIdOrZero
|
||||
FROM VPN-TC-STD-MIB; -- RFC4265
|
||||
|
||||
jnxVplsGenericDraft01MIB MODULE-IDENTITY
|
||||
LAST-UPDATED "201103261200Z" -- 26 March 2011 12:00:00 GMT
|
||||
ORGANIZATION "Layer 2 Virtual Private Networks (L2VPN)
|
||||
Working Group"
|
||||
CONTACT-INFO
|
||||
"
|
||||
Thomas D. Nadeau
|
||||
Email: tnadeau@cisco.com
|
||||
|
||||
The L2VPN Working Group (email distribution l2vpn@ietf.org,
|
||||
http://www.ietf.org/html.charters/l2vpn-charter.html)
|
||||
"
|
||||
|
||||
DESCRIPTION
|
||||
"Copyright (C) The IETF Trust (2010). The initial
|
||||
version of this MIB module was published in RFC XXXX.
|
||||
-- RFC Editor: Please replace XXXX with RFC number & remove
|
||||
-- this note.
|
||||
|
||||
For full legal notices see the RFC itself or see:
|
||||
http://www.ietf.org/copyrights/ianamib.html
|
||||
|
||||
This MIB module contains generic managed object definitions
|
||||
for Virtual Private LAN Services as in [RFC4762] and
|
||||
[RFC4761]
|
||||
|
||||
This MIB module enables the use of any underlying PseudoWire
|
||||
network."
|
||||
|
||||
-- Revision history.
|
||||
REVISION
|
||||
"201103261200Z" -- 26 March 2011 12:00:00 GMT
|
||||
DESCRIPTION
|
||||
"Removed inline definition of VPNIdOrZero in favor
|
||||
of importing the definition from VPN-TC-STD-MIB.
|
||||
"
|
||||
REVISION
|
||||
"200608301200Z" -- 30 August 2006 12:00:00 GMT
|
||||
DESCRIPTION
|
||||
"Changes from previous version:
|
||||
1) Moved LDP Specific information to VPLS-LDP-DRAFT-01-MIB
|
||||
2) Created the vplsStatusTable to store status information.
|
||||
3)
|
||||
|
||||
|
||||
|
||||
"
|
||||
REVISION
|
||||
"200606041200Z" -- 4 June 2006 12:00:00 GMT
|
||||
DESCRIPTION "Initial version published as part of RFC YYYY."
|
||||
-- RFC Editor: please replace YYYY with IANA assigned value, and
|
||||
-- delete this note.
|
||||
|
||||
::= { jnxExperiment 8 }
|
||||
|
||||
-- RFC Editor: please replace XXXX with IANA assigne value, and
|
||||
-- delete this note.
|
||||
|
||||
-- Top-level components of this MIB.
|
||||
|
||||
PwIndexType ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Pseudowire Index. A unique value, greater than zero,
|
||||
for each locally-defined PW for indexing
|
||||
several MIB tables associated with the particular PW.
|
||||
It is recommended that values are assigned contiguously
|
||||
starting from 1. The value for each PW MUST remain
|
||||
constant at least from one re-initialization
|
||||
to the next re-initialization.
|
||||
"
|
||||
SYNTAX Unsigned32 (1..4294967295)
|
||||
|
||||
-- Vpls BGP Autodiscovery specific Textual Convention
|
||||
|
||||
JnxVplsBgpRouteDistinguisher ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Syntax for a route distinguisher. For a complete
|
||||
definition of a route distinguisher, see [RFC4364].
|
||||
For more details on use of a route distinguisher
|
||||
for a VPLS service, see [RFC4761]"
|
||||
REFERENCE
|
||||
"[RFC4364]"
|
||||
SYNTAX OCTET STRING(SIZE (0..256))
|
||||
|
||||
JnxVplsBgpRouteTarget ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Syntax for a route target. For a complete
|
||||
definition of a route target, see [RFC4364]."
|
||||
REFERENCE
|
||||
"[RFC4364]"
|
||||
SYNTAX OCTET STRING(SIZE (0..256))
|
||||
|
||||
JnxVplsBgpRouteTargetType ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Used to define the type of a route target usage.
|
||||
Route targets can be specified to be imported,
|
||||
exported, or both. For a complete definition of a
|
||||
route target, see [RFC4364]."
|
||||
REFERENCE
|
||||
"[RFC4364]"
|
||||
SYNTAX INTEGER { import(1), export(2), both(3) }
|
||||
|
||||
-- Notifications
|
||||
jnxVplsNotifications OBJECT IDENTIFIER
|
||||
::= { jnxVplsGenericDraft01MIB 0 }
|
||||
-- Tables, Scalars
|
||||
jnxVplsObjects OBJECT IDENTIFIER
|
||||
::= { jnxVplsGenericDraft01MIB 1 }
|
||||
-- Conformance
|
||||
jnxVplsConformance OBJECT IDENTIFIER
|
||||
::= { jnxVplsGenericDraft01MIB 2 }
|
||||
|
||||
-- PW Virtual Connection Table
|
||||
|
||||
jnxVplsConfigIndexNext OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object contains an appropriate value to be used
|
||||
for jnxVplsConfigIndex when creating entries in the
|
||||
jnxVplsConfigTable. The value 0 indicates that no
|
||||
unassigned entries are available. To obtain the
|
||||
value of jnxVplsConfigIndex for a new entry in the
|
||||
jnxVplsConfigTable, the manager issues a management
|
||||
protocol retrieval operation to obtain the current
|
||||
value of jnxVplsConfigIndex. After each retrieval
|
||||
operation, the agent should modify the value to
|
||||
reflect the next unassigned index. After a manager
|
||||
retrieves a value the agent will determine through
|
||||
its local policy when this index value will be made
|
||||
available for reuse."
|
||||
::= { jnxVplsObjects 1 }
|
||||
|
||||
jnxVplsConfigTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF JnxVplsConfigEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table specifies information for configuring
|
||||
and monitoring Virtual Private Lan Services(VPLS).
|
||||
"
|
||||
::= { jnxVplsObjects 2 }
|
||||
|
||||
jnxVplsConfigEntry OBJECT-TYPE
|
||||
SYNTAX JnxVplsConfigEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A row in this table represents a Virtual Private Lan
|
||||
Service(VPLS) in a packet network. It is indexed by
|
||||
jnxVplsConfigIndex, which uniquely identifies a single VPLS.
|
||||
|
||||
A row is created by the operator or by the agent if a
|
||||
VPLS service is created by non-SNMP application or
|
||||
due to autodiscovery process.
|
||||
|
||||
None of the read-create objects values can be
|
||||
changed when jnxVplsConfigRowStatus is in the active(1)
|
||||
state. Changes are allowed when the jnxVplsConfigRowStatus
|
||||
is in notInService(2) or notReady(3) states only.
|
||||
If the operator need to change one of the values
|
||||
for an active row the jnxVplsConfigRowStatus should be
|
||||
first changed to notInService(2), the objects may
|
||||
be changed now, and later to active(1) in order to
|
||||
re-initiate the signaling process with the new
|
||||
values in effect.
|
||||
"
|
||||
INDEX { jnxVplsConfigIndex }
|
||||
::= { jnxVplsConfigTable 1 }
|
||||
|
||||
JnxVplsConfigEntry ::=
|
||||
SEQUENCE {
|
||||
jnxVplsConfigIndex Unsigned32,
|
||||
jnxVplsConfigName SnmpAdminString,
|
||||
jnxVplsConfigDescr SnmpAdminString,
|
||||
jnxVplsConfigAdminStatus INTEGER,
|
||||
jnxVplsConfigMacLearning TruthValue,
|
||||
jnxVplsConfigDiscardUnknownDest TruthValue,
|
||||
jnxVplsConfigMacAging TruthValue,
|
||||
jnxVplsConfigFwdFullHighWatermark Unsigned32,
|
||||
jnxVplsConfigFwdFullLowWatermark Unsigned32,
|
||||
|
||||
jnxVplsConfigRowStatus RowStatus,
|
||||
jnxVplsConfigMtu Unsigned32,
|
||||
jnxVplsConfigVpnId VPNIdOrZero,
|
||||
jnxVplsConfigServiceType INTEGER,
|
||||
jnxVplsConfigStorageType StorageType
|
||||
}
|
||||
|
||||
jnxVplsConfigIndex OBJECT-TYPE
|
||||
SYNTAX Unsigned32 (1.. 2147483647)
|
||||
-- MAX-ACCESS not-accessible
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Unique index for the conceptual row identifying
|
||||
a VPLS service."
|
||||
::= { jnxVplsConfigEntry 1 }
|
||||
|
||||
jnxVplsConfigName OBJECT-TYPE
|
||||
SYNTAX SnmpAdminString
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A textual name of the VPLS.
|
||||
If there is no local name, or this object is
|
||||
otherwise not applicable, then this object MUST
|
||||
contain a zero-length octet string."
|
||||
DEFVAL { "" }
|
||||
::= { jnxVplsConfigEntry 2 }
|
||||
|
||||
jnxVplsConfigDescr OBJECT-TYPE
|
||||
SYNTAX SnmpAdminString
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A textual string containing information about the
|
||||
VPLS service. If there is no information for this VPLS
|
||||
service, then this object MUST contain a zero-length
|
||||
octet string."
|
||||
DEFVAL { "" }
|
||||
::= { jnxVplsConfigEntry 3 }
|
||||
|
||||
jnxVplsConfigAdminStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
up(1),
|
||||
down(2),
|
||||
testing(3) -- in some test mode
|
||||
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The desired administrative state of the VPLS
|
||||
service. If the administrative status of the
|
||||
Vpls service is changed to enable then this
|
||||
service is able to utilize the pseudo wire to
|
||||
perform the tasks of a VPLS service.
|
||||
The testing(3) state indicates that no operational
|
||||
packets can be passed. "
|
||||
DEFVAL { down }
|
||||
::= { jnxVplsConfigEntry 4 }
|
||||
|
||||
jnxVplsConfigMacLearning OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies if MAC Learning is enabled
|
||||
in this service. If this object is true then Mac
|
||||
Learning is enabled. If false, then Mac Learning is
|
||||
disabled."
|
||||
DEFVAL { true }
|
||||
::= { jnxVplsConfigEntry 6 }
|
||||
|
||||
jnxVplsConfigDiscardUnknownDest OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"If the value of this object is 'true', then frames
|
||||
received with an unknown destination MAC are discarded
|
||||
in this VPLS. If 'false', then the packets are
|
||||
processed."
|
||||
DEFVAL { false }
|
||||
::= { jnxVplsConfigEntry 7 }
|
||||
|
||||
jnxVplsConfigMacAging OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"If the value of this object is 'true'
|
||||
then the MAC ageing process is enabled in
|
||||
this VPLS. If 'false', then the MAC ageing process
|
||||
is disabled"
|
||||
DEFVAL { true }
|
||||
::= { jnxVplsConfigEntry 8 }
|
||||
|
||||
jnxVplsConfigFwdFullHighWatermark OBJECT-TYPE
|
||||
SYNTAX Unsigned32 (0..100)
|
||||
UNITS "percentage"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies the utilization of the
|
||||
forwarding database for this VPLS instance at
|
||||
which the jnxVplsFwdFullAlarmRaised notification
|
||||
will be sent."
|
||||
DEFVAL { 95 }
|
||||
::= { jnxVplsConfigEntry 10 }
|
||||
|
||||
jnxVplsConfigFwdFullLowWatermark OBJECT-TYPE
|
||||
SYNTAX Unsigned32 (0..100)
|
||||
UNITS "percentage"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object specifies the utilization of the
|
||||
forwarding database for this VPLS instance
|
||||
at which the jnxVplsFwdFullAlarmCleared
|
||||
notification will be sent."
|
||||
DEFVAL { 90 }
|
||||
::= { jnxVplsConfigEntry 11 }
|
||||
|
||||
jnxVplsConfigRowStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"For creating, modifying, and deleting this row.
|
||||
None of the read-create objects in the
|
||||
conceptual rows may be changed when this
|
||||
object is in the active(1) state."
|
||||
::= { jnxVplsConfigEntry 12 }
|
||||
|
||||
jnxVplsConfigMtu OBJECT-TYPE
|
||||
SYNTAX Unsigned32 (64..1518)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The value of this object specifies the MTU of this
|
||||
vpls instance."
|
||||
DEFVAL { 1518 }
|
||||
::= { jnxVplsConfigEntry 13 }
|
||||
|
||||
jnxVplsConfigVpnId OBJECT-TYPE
|
||||
SYNTAX VPNIdOrZero
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This objects indicates the IEEE 802-1990
|
||||
VPN ID of the associated VPLS service."
|
||||
::= { jnxVplsConfigEntry 14 }
|
||||
|
||||
jnxVplsConfigServiceType OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
vlan (1),
|
||||
ethernet (2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The value of this object specifies the type of
|
||||
service emulated by this vpls instance."
|
||||
DEFVAL { vlan }
|
||||
::= { jnxVplsConfigEntry 15 }
|
||||
|
||||
jnxVplsConfigStorageType OBJECT-TYPE
|
||||
SYNTAX StorageType
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This variable indicates the storage type for this row."
|
||||
DEFVAL { volatile }
|
||||
::= { jnxVplsConfigEntry 16 }
|
||||
|
||||
-- VPLS Status table
|
||||
|
||||
jnxVplsStatusTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF JnxVplsStatusEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table provides information for monitoring
|
||||
Virtual Private Lan Services(VPLS).
|
||||
"
|
||||
::= { jnxVplsObjects 3 }
|
||||
|
||||
jnxVplsStatusEntry OBJECT-TYPE
|
||||
SYNTAX JnxVplsStatusEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A row in this table represents a Virtual Private Lan
|
||||
Service(VPLS) in a packet network. It is indexed by
|
||||
jnxVplsConfigIndex, which uniquely identifies a single VPLS.
|
||||
|
||||
A row in this table is automatically created by the agent
|
||||
when a VPLS service is configured.
|
||||
"
|
||||
INDEX { jnxVplsConfigIndex }
|
||||
::= { jnxVplsStatusTable 1 }
|
||||
|
||||
JnxVplsStatusEntry ::=
|
||||
SEQUENCE {
|
||||
jnxVplsStatusOperStatus INTEGER,
|
||||
jnxVplsStatusPeerCount Counter32
|
||||
}
|
||||
|
||||
jnxVplsStatusOperStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
other(0),
|
||||
up(1),
|
||||
down(2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The current operational state of this VPLS Service."
|
||||
::= { jnxVplsStatusEntry 1 }
|
||||
|
||||
jnxVplsStatusPeerCount OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This objects specifies the number of peers
|
||||
present in this vpls instance."
|
||||
::= { jnxVplsStatusEntry 2 }
|
||||
|
||||
-- VPLS PW Binding Table
|
||||
|
||||
jnxVplsPwBindTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF JnxVplsPwBindEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table provides an association between a
|
||||
VPLS service and the corresponding Pseudo
|
||||
Wires. A service can have more than one Pseudo
|
||||
Wire association. Pseudo Wires are defined in
|
||||
the pwTable"
|
||||
::= { jnxVplsObjects 4 }
|
||||
|
||||
jnxVplsPwBindEntry OBJECT-TYPE
|
||||
SYNTAX JnxVplsPwBindEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Each row represents an association between a
|
||||
VPLS instance and one or more Pseudo Wires
|
||||
defined in the pwTable. Each index is unique
|
||||
in describing an entry in this table. However
|
||||
both indexes are required to define the one
|
||||
to many association of service to
|
||||
pseudowire."
|
||||
INDEX { jnxVplsConfigIndex, jnxVplsPwBindIndex }
|
||||
::= { jnxVplsPwBindTable 1 }
|
||||
|
||||
JnxVplsPwBindEntry ::=
|
||||
SEQUENCE {
|
||||
jnxVplsPwBindConfigType INTEGER,
|
||||
jnxVplsPwBindType INTEGER,
|
||||
jnxVplsPwBindRowStatus RowStatus,
|
||||
jnxVplsPwBindStorageType StorageType,
|
||||
jnxVplsPwBindIndex PwIndexType
|
||||
}
|
||||
|
||||
jnxVplsPwBindConfigType OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
manual (1),
|
||||
autodiscovery (2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The value of this object indicates
|
||||
whether the Pseudo Wire binding was created
|
||||
manually or via autodiscovery.
|
||||
|
||||
The value of this object must be
|
||||
specifed when the row is created and cannot
|
||||
be changed while the row status is active(1)"
|
||||
::= { jnxVplsPwBindEntry 1 }
|
||||
|
||||
jnxVplsPwBindType OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
mesh (1),
|
||||
spoke (2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The value of this object indicates
|
||||
whether the Pseudo Wire binding is of
|
||||
type mesh or spoke.
|
||||
|
||||
The value of this object must be
|
||||
specifed when the row is created and cannot
|
||||
be changed while the row status is active(1)"
|
||||
::= { jnxVplsPwBindEntry 2 }
|
||||
|
||||
jnxVplsPwBindRowStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"For creating, modifying, and deleting this row.
|
||||
None of the read-create objects in the
|
||||
conceptual rows may be changed when this
|
||||
object is in the active(1) state"
|
||||
::= { jnxVplsPwBindEntry 3 }
|
||||
|
||||
jnxVplsPwBindStorageType OBJECT-TYPE
|
||||
SYNTAX StorageType
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This variable indicates the storage type for this row."
|
||||
DEFVAL { volatile }
|
||||
::= { jnxVplsPwBindEntry 4 }
|
||||
|
||||
-- Joe Added xxx
|
||||
jnxVplsPwBindIndex OBJECT-TYPE
|
||||
SYNTAX PwIndexType
|
||||
-- MAX-ACCESS not-accessible
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Secondary Index for the conceptual row identifying
|
||||
a pseudowire within the PwEntry which MUST
|
||||
match an entry from the PW-STD-MIB's PwTable
|
||||
which represents an already-provisioned
|
||||
pseudowire that is then associated with this
|
||||
VPLS instance.
|
||||
"
|
||||
::= { jnxVplsPwBindEntry 5 }
|
||||
|
||||
-- jnxVplsBgpADConfigTable
|
||||
|
||||
jnxVplsBgpADConfigTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF JnxVplsBgpADConfigEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table specifies information for configuring
|
||||
BGP Auto-discovery parameters for a given Vpls service.
|
||||
"
|
||||
::= { jnxVplsObjects 5 }
|
||||
|
||||
jnxVplsBgpADConfigEntry OBJECT-TYPE
|
||||
SYNTAX JnxVplsBgpADConfigEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A row in this table represents BGP based autodiscovery
|
||||
is in use for this instance of Vpls.
|
||||
A row in this table is indexed by jnxVplsConfigIndex, which
|
||||
uniquely identifies a single VPLS.
|
||||
None of the read-create objects can be changed when
|
||||
jnxVplsBGPADConfigRowStatus is in active(1) state. Changes
|
||||
are allowed when the jnxVplsBGPADConfigRowStatus is in
|
||||
notInService(2) or notReady(3) states only.
|
||||
If the operator need to change one of the values
|
||||
for an active row the jnxVplsConfigRowStatus should be
|
||||
first changed to notInService(2), the objects may
|
||||
be changed now, and later to active(1) in order to
|
||||
re-initiate the signaling process with the new
|
||||
values in effect.
|
||||
"
|
||||
INDEX { jnxVplsConfigIndex }
|
||||
::= { jnxVplsBgpADConfigTable 1 }
|
||||
|
||||
JnxVplsBgpADConfigEntry ::=
|
||||
SEQUENCE {
|
||||
jnxVplsBgpADConfigRouteDistinguisher JnxVplsBgpRouteDistinguisher,
|
||||
jnxVplsBgpADConfigPrefix Unsigned32,
|
||||
jnxVplsBgpADConfigVplsId JnxVplsBgpRouteDistinguisher,
|
||||
jnxVplsBgpADConfigRowStatus RowStatus
|
||||
}
|
||||
|
||||
jnxVplsBgpADConfigRouteDistinguisher OBJECT-TYPE
|
||||
SYNTAX JnxVplsBgpRouteDistinguisher
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The route distinguisher for this VPLS. See [RFC4364]
|
||||
for a complete definition of a route distinguisher.
|
||||
for more details on use of a route distinguisher
|
||||
for a VPLS service, see [RFC4761]
|
||||
"
|
||||
::= { jnxVplsBgpADConfigEntry 1 }
|
||||
|
||||
jnxVplsBgpADConfigPrefix OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" In case of auto-discovery the default prefix advertised
|
||||
is the ip address of the loopback. In case the user wants
|
||||
to override the loopback address, jnxVplsBgpADConfigPrefix
|
||||
should be set. When this value if non-zero it is used
|
||||
as the advertised IP address in the NLRI.
|
||||
"
|
||||
DEFVAL { 0 }
|
||||
::= { jnxVplsBgpADConfigEntry 2 }
|
||||
|
||||
jnxVplsBgpADConfigVplsId OBJECT-TYPE
|
||||
SYNTAX JnxVplsBgpRouteDistinguisher
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" VplsId is a unique identifier for all VSIs belonging to
|
||||
the same VPLS. It is advertised as an extended community
|
||||
"
|
||||
::= { jnxVplsBgpADConfigEntry 3 }
|
||||
|
||||
jnxVplsBgpADConfigRowStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" For creating, modifying, and deleting this row.
|
||||
None of the read-create objects in the
|
||||
conceptual rows may be changed when this
|
||||
object is in the active(1) state.
|
||||
"
|
||||
::= { jnxVplsBgpADConfigEntry 4 }
|
||||
|
||||
|
||||
-- jnxVplsBgpRteTargetTable
|
||||
|
||||
jnxVplsBgpRteTargetTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF JnxVplsBgpRteTargetEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" This table specifies the list of Route Targets
|
||||
imported or exported by BGP during auto-discovery of VPLS.
|
||||
"
|
||||
::= { jnxVplsObjects 6 }
|
||||
|
||||
jnxVplsBgpRteTargetEntry OBJECT-TYPE
|
||||
SYNTAX JnxVplsBgpRteTargetEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An entry in this table specifies the value of the
|
||||
Route Target being used by BGP. Depending on the value
|
||||
of jnxVplsBgpRteTargetType an RT might be exported or
|
||||
imported or both. Every VPLS which
|
||||
uses auto-discovery for finding peer nodes can import and
|
||||
export multiple Route Targets. This representation allows
|
||||
support for hierarchical VPLS.
|
||||
"
|
||||
INDEX { jnxVplsConfigIndex, jnxVplsBgpRteTargetIndex }
|
||||
::= { jnxVplsBgpRteTargetTable 1 }
|
||||
|
||||
JnxVplsBgpRteTargetEntry ::=
|
||||
SEQUENCE {
|
||||
jnxVplsBgpRteTargetIndex Unsigned32,
|
||||
jnxVplsBgpRteTargetRTType JnxVplsBgpRouteTargetType,
|
||||
jnxVplsBgpRteTargetRT JnxVplsBgpRouteTarget,
|
||||
jnxVplsBgpRteTargetRTRowStatus RowStatus
|
||||
}
|
||||
|
||||
jnxVplsBgpRteTargetIndex OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This index along with jnxVplsConfigIndex,identifies one entry
|
||||
in the jnxVplsBgpRteTargetTable. By keeping jnxVplsConfigIndex
|
||||
constant and using new value of jnxVplsBgpRteTargetIndex user
|
||||
can configure multiple Route Targets for the same Vpls.
|
||||
"
|
||||
::= { jnxVplsBgpRteTargetEntry 1 }
|
||||
|
||||
jnxVplsBgpRteTargetRTType OBJECT-TYPE
|
||||
SYNTAX JnxVplsBgpRouteTargetType
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" Used to define the type of a route target usage.
|
||||
Route targets can be specified to be imported,
|
||||
exported, or both. For a complete definition of a
|
||||
route target, see [RFC4364].
|
||||
"
|
||||
::= { jnxVplsBgpRteTargetEntry 2 }
|
||||
|
||||
jnxVplsBgpRteTargetRT OBJECT-TYPE
|
||||
SYNTAX JnxVplsBgpRouteTarget
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The route target associated with the VPLS service.
|
||||
For more details on use of route targets
|
||||
for a VPLS service, see [RFC4761]
|
||||
"
|
||||
::= { jnxVplsBgpRteTargetEntry 3 }
|
||||
|
||||
jnxVplsBgpRteTargetRTRowStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This variable is used to create, modify, and/or
|
||||
delete a row in this table. When a row in this
|
||||
table is in active(1) state, no objects in that row
|
||||
can be modified
|
||||
"
|
||||
::= { jnxVplsBgpRteTargetEntry 4 }
|
||||
|
||||
jnxVplsStatusNotifEnable OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"If this object is set to true(1), then it enables
|
||||
the emission of jnxVplsStatusChanged
|
||||
notification; otherwise this notification is not
|
||||
emitted."
|
||||
REFERENCE
|
||||
"See also [RFC3413] for explanation that
|
||||
notifications are under the ultimate control of the
|
||||
MIB module in this document."
|
||||
DEFVAL { false }
|
||||
::= { jnxVplsObjects 7 }
|
||||
|
||||
jnxVplsNotificationMaxRate OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates the maximum number of
|
||||
notifications issued per second. If events occur
|
||||
more rapidly, the implementation may simply fail to
|
||||
emit these notifications during that period, or may
|
||||
queue them until an appropriate time. A value of 0
|
||||
means no throttling is applied and events may be
|
||||
notified at the rate at which they occur."
|
||||
DEFVAL { 0 }
|
||||
::= { jnxVplsObjects 8 }
|
||||
|
||||
-- VPLS Service Notifications
|
||||
|
||||
jnxVplsStatusChanged NOTIFICATION-TYPE
|
||||
OBJECTS {
|
||||
jnxVplsConfigVpnId,
|
||||
jnxVplsConfigAdminStatus,
|
||||
jnxVplsStatusOperStatus
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The jnxVplsStatusChanged notification is generated
|
||||
when there is a change in the administrative or
|
||||
operating status of a VPLS service."
|
||||
::= { jnxVplsNotifications 1 }
|
||||
|
||||
jnxVplsFwdFullAlarmRaised NOTIFICATION-TYPE
|
||||
OBJECTS {
|
||||
jnxVplsConfigVpnId,
|
||||
jnxVplsConfigFwdFullHighWatermark,
|
||||
jnxVplsConfigFwdFullLowWatermark
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The jnxVplsFwdFullAlarmRaised notification is
|
||||
generated when the utilization of the Forwarding
|
||||
database is above the value specified by
|
||||
jnxVplsConfigFwdFullHighWatermark."
|
||||
::= { jnxVplsNotifications 2 }
|
||||
|
||||
jnxVplsFwdFullAlarmCleared NOTIFICATION-TYPE
|
||||
OBJECTS {
|
||||
jnxVplsConfigVpnId,
|
||||
jnxVplsConfigFwdFullHighWatermark,
|
||||
jnxVplsConfigFwdFullLowWatermark
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The jnxVplsFwdFullAlarmCleared notification is
|
||||
generated when the utilization of the Forwarding
|
||||
database is below the value specified by
|
||||
jnxVplsConfigFwdFullLowWatermark."
|
||||
::= { jnxVplsNotifications 3 }
|
||||
|
||||
END
|
||||
Reference in New Issue
Block a user