Initial commit
This commit is contained in:
David Leutgeb
725
MIBS/linksys/LINKSYS-LLDP-MIB
Normal file
725
MIBS/linksys/LINKSYS-LLDP-MIB
Normal file
@ -0,0 +1,725 @@
|
||||
LINKSYS-LLDP-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
-- Title: LINKSYS LLDP ROS
|
||||
-- Private LLDP MIB
|
||||
-- Version: 7.42
|
||||
-- Date: 12 Dec 2005
|
||||
|
||||
IMPORTS
|
||||
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, Unsigned32,
|
||||
NOTIFICATION-TYPE
|
||||
FROM SNMPv2-SMI
|
||||
TEXTUAL-CONVENTION, TruthValue, RowStatus
|
||||
FROM SNMPv2-TC
|
||||
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
||||
FROM SNMPv2-CONF
|
||||
rnd, rndNotifications
|
||||
FROM LINKSYS-MIB
|
||||
LldpPortList, LldpPortNumber, LldpManAddress
|
||||
FROM LLDP-MIB
|
||||
PortList
|
||||
FROM Q-BRIDGE-MIB
|
||||
Dscp
|
||||
FROM DIFFSERV-DSCP-TC
|
||||
AddressFamilyNumbers
|
||||
FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB
|
||||
lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex
|
||||
FROM LLDP-MIB
|
||||
LldpXMedCapabilities
|
||||
FROM LLDP-EXT-MED-MIB
|
||||
rndErrorDesc, rndErrorSeverity
|
||||
FROM LINKSYS-DEVICEPARAMS-MIB;
|
||||
|
||||
|
||||
rlLldp MODULE-IDENTITY
|
||||
LAST-UPDATED "200506200000Z"
|
||||
ORGANIZATION "Linksys LLC."
|
||||
CONTACT-INFO
|
||||
"www.linksys.com/business/support"
|
||||
DESCRIPTION
|
||||
"This private MIB module adds MIBs to LLDP (Link Layer Discovery Protocol)."
|
||||
REVISION "200506200000Z"
|
||||
DESCRIPTION
|
||||
"Initial revision."
|
||||
::= { rnd 110 }
|
||||
|
||||
rlLldpObjects OBJECT IDENTIFIER ::= { rlLldp 1 }
|
||||
|
||||
rlLldpConfig OBJECT IDENTIFIER ::= { rlLldpObjects 1 }
|
||||
rlLldpXMedConfig OBJECT IDENTIFIER ::= { rlLldpObjects 2 }
|
||||
|
||||
PolicyNumber ::= TEXTUAL-CONVENTION
|
||||
DISPLAY-HINT "d"
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Policy Number in the Media Policy Container.
|
||||
|
||||
Policy numbers should be in the range of 1 and 32768 since 8 policies
|
||||
can be configured for each particular port and the number of ports range is
|
||||
1 to 4096."
|
||||
SYNTAX Integer32(1..32768)
|
||||
|
||||
-- Policy Application Type Textual Convention
|
||||
|
||||
PolicyContainerAppType ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The media type that defines the primary function of the
|
||||
application for the policy advertised by an endpoint.
|
||||
|
||||
A value of voice(1) indicates that the media type defining
|
||||
a primary function of the application for the policy advertised on
|
||||
the local port is voice.
|
||||
|
||||
A value of voiceSignaling(3) indicates that the media type
|
||||
defining a primary function of the application for the policy
|
||||
advertised on the local port is voice signaling.
|
||||
|
||||
A value of guestVoice(4) indicates that the media type
|
||||
Defining a primary function of the application for the policy
|
||||
advertised on the local port is guest voice.
|
||||
|
||||
A value of guestVoiceSignaling(5) indicates that the media
|
||||
type defining a primary function of the application for the policy
|
||||
advertised on the local port is guest voice signaling.
|
||||
|
||||
A value of softPhoneVoice(6) indicates that the media type
|
||||
Defining a primary function of the application for the policy
|
||||
advertised on the local port is softphone voice.
|
||||
|
||||
A value of videoConferencing(7) indicates that the media
|
||||
type defining a primary function of the application for the policy
|
||||
advertised on the local port is voice.
|
||||
|
||||
A value of streamingVideo(8) indicates that the media type
|
||||
defining a primary function of the application for the policy
|
||||
advertised on the local port is streaming video.
|
||||
|
||||
A value of videoSignaling(2) indicates that the media type
|
||||
defining a primary function of the application for the policy
|
||||
advertised on the local port is video signaling."
|
||||
SYNTAX INTEGER {
|
||||
unknown(0),
|
||||
voice(1),
|
||||
voiceSignaling(2),
|
||||
guestVoice(3),
|
||||
guestVoiceSignaling(4),
|
||||
softPhoneVoice(5),
|
||||
videoconferencing(6),
|
||||
streamingVideo(7),
|
||||
videoSignaling(8)
|
||||
}
|
||||
|
||||
|
||||
PolicyAppVoiceUpdateMode ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION ""
|
||||
SYNTAX INTEGER {
|
||||
manual(0),
|
||||
auto(1)
|
||||
}
|
||||
|
||||
rlLldpEnabled OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Setting this variable to 'true' will globally enable the LLDP feature
|
||||
(both transmit and receive functionalities). Setting this variable
|
||||
to 'false' will globally disable the LLDP feature. Thus, the
|
||||
administratively desired status of a local port is determined by
|
||||
both this variable and the MIB lldpPortConfigAdminStatus."
|
||||
::= { rlLldpConfig 1 }
|
||||
|
||||
rlLldpClearRx OBJECT-TYPE
|
||||
SYNTAX PortList
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A set of ports that are identified by a PortList, in which
|
||||
each port is represented as a bit.
|
||||
Clears the Rx information about the remote agents accordingly to the
|
||||
specified PortList.
|
||||
The default value for rlLldpClearRx object is an empty binary string,
|
||||
which means no ports are specified to be cleared from the Rx Info.
|
||||
This object behaviors as an event (write-only) than
|
||||
reading this object always results in an Empty Port List of length zero."
|
||||
REFERENCE
|
||||
""
|
||||
DEFVAL { ''H } -- empty octet string
|
||||
::= { rlLldpConfig 2 }
|
||||
|
||||
rlLldpDuMode OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
filtering(1),
|
||||
flooding(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Action with LLDPDU upon globally disabled LLDP.
|
||||
|
||||
If the associated rlLldpDuMode object has a value of
|
||||
'filtering(1)', then received frames are containing LLDPDU
|
||||
will be dropped.
|
||||
|
||||
If the associated rlLldpDuMode object has a value of
|
||||
'flooding(2)', then received frames are containing LLDPDU
|
||||
will flood all active ports."
|
||||
REFERENCE
|
||||
"Linksys LLDP System Specifications"
|
||||
DEFVAL { filtering }
|
||||
::= { rlLldpConfig 3 }
|
||||
|
||||
rlLldpAutoAdvLocPortManAddrTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF RlLldpAutoAdvLocPortManAddrEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table contains automaticaly selected management address,
|
||||
advertised on the local port."
|
||||
REFERENCE
|
||||
"Linksys LLDP"
|
||||
::= { rlLldpConfig 4 }
|
||||
|
||||
rlLldpAutoAdvLocPortManAddrEntry OBJECT-TYPE
|
||||
SYNTAX RlLldpAutoAdvLocPortManAddrEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Information about a local port, which advertises the Management
|
||||
address automatically. Entry also included an interface number, on
|
||||
which the Management address is assigned.
|
||||
Each management address should have distinct 'management address
|
||||
type' (rlLldpAutoAdvManAddrSubtype) and 'management address'
|
||||
(rlLldpAutoAdvManAddr)."
|
||||
|
||||
INDEX { rlLldpAutoAdvLocPortNum }
|
||||
::= { rlLldpAutoAdvLocPortManAddrTable 1 }
|
||||
|
||||
RlLldpAutoAdvLocPortManAddrEntry ::= SEQUENCE {
|
||||
rlLldpAutoAdvLocPortNum LldpPortNumber,
|
||||
rlLldpAutoAdvManAddrOwnerIfId Integer32,
|
||||
rlLldpAutoAdvManAddrNone TruthValue,
|
||||
rlLldpAutoAdvManAddrSubtype AddressFamilyNumbers,
|
||||
rlLldpAutoAdvManAddr LldpManAddress,
|
||||
rlLldpAutoAdvPortsStatus RowStatus
|
||||
}
|
||||
|
||||
rlLldpAutoAdvLocPortNum OBJECT-TYPE
|
||||
SYNTAX LldpPortNumber
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The index value used to identify the port component
|
||||
(contained in the local chassis with the LLDP agent)
|
||||
associated with this entry.
|
||||
|
||||
The value of this object is used as a port index to the
|
||||
rlLldpAutoAdvLocPortManAddrTable."
|
||||
::= { rlLldpAutoAdvLocPortManAddrEntry 1 }
|
||||
|
||||
rlLldpAutoAdvManAddrOwnerIfId OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The integer value is used to identify the interface number
|
||||
(port, trunk or vlan). The management address, automatically
|
||||
advertised from associated 'rlLldpAutoAdvLocPortNum'local port is
|
||||
assigned to mentioned 'rlLldpAutoAdvManAddrOwnerIfId' interface.
|
||||
In case of 0 the management address is automatically calculated
|
||||
without care to the ifIndex it was defined on."
|
||||
DEFVAL { 0 }
|
||||
::= { rlLldpAutoAdvLocPortManAddrEntry 2 }
|
||||
|
||||
rlLldpAutoAdvManAddrNone OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A value of 'true' indicates that the any management address hasn't advertised
|
||||
by the local port. Moreover, the configuration of automatic management address
|
||||
advertisment is disabled.
|
||||
A value of 'false' indicates that the configuration of automatic management address
|
||||
advertisment is enabled."
|
||||
DEFVAL { false }
|
||||
::= { rlLldpAutoAdvLocPortManAddrEntry 3 }
|
||||
|
||||
rlLldpAutoAdvManAddrSubtype OBJECT-TYPE
|
||||
SYNTAX AddressFamilyNumbers
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The type of management address identifier encoding used in
|
||||
the associated 'rlLldpAutoAdvManAddr' object."
|
||||
::= { rlLldpAutoAdvLocPortManAddrEntry 4 }
|
||||
|
||||
rlLldpAutoAdvManAddr OBJECT-TYPE
|
||||
SYNTAX LldpManAddress
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The string value used to identify the management address is
|
||||
automaticaly advertised by local port, and assigned on the
|
||||
associated 'rlLldpAutoAdvManAddrOwnerIfId' interface."
|
||||
::= { rlLldpAutoAdvLocPortManAddrEntry 5 }
|
||||
|
||||
rlLldpAutoAdvPortsStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The row status variable, used according to
|
||||
row installation and removal conventions."
|
||||
::= { rlLldpAutoAdvLocPortManAddrEntry 6 }
|
||||
|
||||
--rlLldpLocChassisId OBJECT-TYPE
|
||||
-- SYNTAX OCTET STRING(SIZE(1..20))
|
||||
-- MAX-ACCESS read-write
|
||||
-- STATUS current
|
||||
-- DESCRIPTION
|
||||
-- "The string value used to identify the chassis component associated
|
||||
-- with the local system. As a result of updating this variable,
|
||||
-- lldpLocChassisid will have the same value, and the MIB
|
||||
-- lldpLocChassisIdSubtype will have the value local(7). "
|
||||
-- ::= { rlLldp 2}
|
||||
|
||||
|
||||
|
||||
------------------------------------------------------------------------------
|
||||
-- LLDP-MED - Local Device Configuration
|
||||
------------------------------------------------------------------------------
|
||||
---
|
||||
--- rlLldpXMedLocMediaPolicyContainerTable: Local Media Policy Container
|
||||
--- Configuration Table
|
||||
---
|
||||
---
|
||||
rlLldpXMedLocMediaPolicyContainerTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF RlLldpXMedLocMediaPolicyContainerEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table contains one row per policy number
|
||||
of media policy container configuration."
|
||||
::= { rlLldpXMedConfig 1 }
|
||||
|
||||
rlLldpXMedLocMediaPolicyContainerEntry OBJECT-TYPE
|
||||
SYNTAX RlLldpXMedLocMediaPolicyContainerEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Configuration of a particular policy in the media policy container."
|
||||
INDEX { rlLldpXMedLocMediaPolicyContainerIndex }
|
||||
::= { rlLldpXMedLocMediaPolicyContainerTable 1 }
|
||||
|
||||
RlLldpXMedLocMediaPolicyContainerEntry ::= SEQUENCE {
|
||||
rlLldpXMedLocMediaPolicyContainerIndex PolicyNumber,
|
||||
rlLldpXMedLocMediaPolicyContainerAppType PolicyContainerAppType,
|
||||
rlLldpXMedLocMediaPolicyContainerVlanID Integer32,
|
||||
rlLldpXMedLocMediaPolicyContainerPriority Integer32,
|
||||
rlLldpXMedLocMediaPolicyContainerDscp Dscp,
|
||||
rlLldpXMedLocMediaPolicyContainerUnknown TruthValue,
|
||||
rlLldpXMedLocMediaPolicyContainerTagged TruthValue,
|
||||
rlLldpXMedLocMediaPolicyContainerPorts PortList,
|
||||
rlLldpXMedLocMediaPolicyContainerRowStatus RowStatus
|
||||
}
|
||||
|
||||
rlLldpXMedLocMediaPolicyContainerIndex OBJECT-TYPE
|
||||
SYNTAX PolicyNumber
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The index value used to identify the Media Policy
|
||||
associated with this entry.
|
||||
The value of this object is used as a policy number index to the
|
||||
rlLldpXMedLocMediaPolicyContainerTable."
|
||||
::= { rlLldpXMedLocMediaPolicyContainerEntry 1 }
|
||||
|
||||
rlLldpXMedLocMediaPolicyContainerAppType OBJECT-TYPE
|
||||
SYNTAX PolicyContainerAppType
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The media type that defines the primary function of the
|
||||
application for the policy advertised by an endpoint."
|
||||
REFERENCE
|
||||
"ANSI/TIA-1057, Section 10.2.3.1"
|
||||
::= { rlLldpXMedLocMediaPolicyContainerEntry 2 }
|
||||
|
||||
rlLldpXMedLocMediaPolicyContainerVlanID OBJECT-TYPE
|
||||
SYNTAX Integer32 (0|1..4094|4095)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An extension of the VLAN Identifier for the port,
|
||||
as defined in IEEE 802.1P-1998.
|
||||
|
||||
A value of 1 through 4094 is used to define a valid PVID.
|
||||
|
||||
A value of 0 shall be used if the device is using priority tagged
|
||||
frames, meaning that only the 802.1p priority level is significant
|
||||
and the default VID of the ingress port is being used instead.
|
||||
|
||||
A value of 4095 is reserved for implementation use."
|
||||
REFERENCE
|
||||
" ANSI/TIA-1057, Section 10.2.3.5"
|
||||
DEFVAL { 0 }
|
||||
::= { rlLldpXMedLocMediaPolicyContainerEntry 3 }
|
||||
|
||||
rlLldpXMedLocMediaPolicyContainerPriority OBJECT-TYPE
|
||||
SYNTAX Integer32 (0..7)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object contains the value of the 802.1p priority
|
||||
which is associated with the given port on the
|
||||
local system."
|
||||
REFERENCE
|
||||
" ANSI/TIA-1057, Section 10.2.3.6 "
|
||||
DEFVAL { 0 }
|
||||
::= { rlLldpXMedLocMediaPolicyContainerEntry 4 }
|
||||
|
||||
rlLldpXMedLocMediaPolicyContainerDscp OBJECT-TYPE
|
||||
SYNTAX Dscp
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object contains the value of the Differentiated Service
|
||||
Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475
|
||||
which is associated with the given port on the local system."
|
||||
REFERENCE
|
||||
" ANSI/TIA-1057, Section 10.2.3.7"
|
||||
DEFVAL { 0 }
|
||||
::= { rlLldpXMedLocMediaPolicyContainerEntry 5 }
|
||||
|
||||
rlLldpXMedLocMediaPolicyContainerUnknown OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A value of 'true' indicates that the
|
||||
network policy for the specified application type is
|
||||
currently unknown. In this case, the VLAN ID, the
|
||||
layer 2 priority and the DSCP value fields are ignored.
|
||||
A value of 'false' indicates that this network policy
|
||||
is defined "
|
||||
REFERENCE
|
||||
" ANSI/TIA-1057, Section 10.2.3.2"
|
||||
DEFVAL { false }
|
||||
::= { rlLldpXMedLocMediaPolicyContainerEntry 6 }
|
||||
|
||||
rlLldpXMedLocMediaPolicyContainerTagged OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A value of 'true' indicates that the application is using a
|
||||
tagged VLAN.
|
||||
A value of 'false' indicates that for the specific application
|
||||
the device either is using an untagged VLAN or does not
|
||||
support port based VLAN operation. In this case, both the
|
||||
VLAN ID and the Layer 2 priority fields are ignored and
|
||||
only the DSCP value has relevance "
|
||||
REFERENCE
|
||||
" ANSI/TIA-1057, Section 10.2.3.3"
|
||||
DEFVAL { false }
|
||||
::= { rlLldpXMedLocMediaPolicyContainerEntry 7 }
|
||||
|
||||
rlLldpXMedLocMediaPolicyContainerPorts OBJECT-TYPE
|
||||
SYNTAX PortList
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A set of ports that are identified by a PortList, in which
|
||||
each port is represented as a bit. The local Media Policy Number
|
||||
will be associated with (or attached to) the ports specified at
|
||||
the rlLldpXMedLocMediaPolicyContainerPorts.
|
||||
|
||||
The default value for rlLldpXMedLocMediaPolicyContainerPorts object
|
||||
is empty binary string, which means no ports are specified
|
||||
for advertising indicated management address instance."
|
||||
REFERENCE
|
||||
"IEEE 802.1AB-2004 10.2.1.1"
|
||||
DEFVAL { ''H } -- empty binary string
|
||||
::= { rlLldpXMedLocMediaPolicyContainerEntry 8 }
|
||||
|
||||
rlLldpXMedLocMediaPolicyContainerRowStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The row status variable, used according to
|
||||
row installation and removal conventions."
|
||||
::= { rlLldpXMedLocMediaPolicyContainerEntry 9 }
|
||||
|
||||
------------------------------------------------------------------------------
|
||||
-- LLDP - TX TLV overloading
|
||||
------------------------------------------------------------------------------
|
||||
|
||||
|
||||
rlLldpTLVsTxOverloadingTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF RlLldpTLVsTxOverloadingEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A table that show the which of the LLDP TLVs are not transmitted
|
||||
on individual ports due to insufficient room in the frame
|
||||
and the size of each TLV."
|
||||
::= { rlLldpObjects 3 }
|
||||
|
||||
|
||||
rlLldpTLVsTxOverloadingEntry OBJECT-TYPE
|
||||
SYNTAX RlLldpTLVsTxOverloadingEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"LLDP TX overloading information that shows the
|
||||
transmission of TLVs on LLDP transmission capable ports."
|
||||
INDEX { rlLldpTxOverloadingPortNum,
|
||||
rlLldpTxOverloadingIndex }
|
||||
::= { rlLldpTLVsTxOverloadingTable 1 }
|
||||
|
||||
RlLldpTLVsTxOverloadingEntry ::= SEQUENCE {
|
||||
rlLldpTxOverloadingPortNum LldpPortNumber,
|
||||
rlLldpTxOverloadingIndex Unsigned32,
|
||||
rlLldpTxOverloadingGroupId INTEGER,
|
||||
rlLldpTLVsTxSize Unsigned32,
|
||||
rlLldpTLVsTxGroupOverloading TruthValue,
|
||||
rlLldpTLVsTxLeftSize Unsigned32
|
||||
}
|
||||
|
||||
rlLldpTxOverloadingPortNum OBJECT-TYPE
|
||||
SYNTAX LldpPortNumber
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The value of this object is used as a port index to the
|
||||
TLVs TX overloading Table ."
|
||||
::= { rlLldpTLVsTxOverloadingEntry 1 }
|
||||
|
||||
rlLldpTxOverloadingIndex OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The sequence number of the group into sent LLDP PPDU starting from 1."
|
||||
::= { rlLldpTLVsTxOverloadingEntry 2 }
|
||||
|
||||
rlLldpTxOverloadingGroupId OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
-- LLDP mandatory TLVs
|
||||
mandatory(1),
|
||||
optional(2),
|
||||
-- LLDP MED
|
||||
medCap(3),
|
||||
medLocation(4),
|
||||
medNetPolicy(5),
|
||||
medPoe(6),
|
||||
-- LLDP MED - Inventory
|
||||
medInventory(7),
|
||||
-- 802.3 TLVs
|
||||
xDot3(8),
|
||||
-- 802.1 TLVs
|
||||
xDot1(9),
|
||||
-- DCBX TLVs
|
||||
dcbx(10)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Defines the TLVs groups.
|
||||
A value of mandatory(1) defines LLDP mandatory TLVs group
|
||||
A value of optinal(2) defines LLDP optional TLVs group
|
||||
A value of medCap(3) defines LLDP MED - Capabilities group
|
||||
A value of medLocation(4) defines LLDP MED - Location group
|
||||
A value of medNetPolicy(5) defines LLDP MED - Network Policy group
|
||||
A value of medPoe(6) defines LLDP MED - Extended Power via MDI group
|
||||
A value of medInventory(7) defines LLDP MED - Inventory group
|
||||
A value of Xdot3(8) defines 802.3 TLVs group
|
||||
A value of Xdot1(9) defines 802.1 TLVs group "
|
||||
::= { rlLldpTLVsTxOverloadingEntry 3 }
|
||||
|
||||
rlLldpTLVsTxSize OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The size of the TLV in Bytes."
|
||||
::= { rlLldpTLVsTxOverloadingEntry 4 }
|
||||
|
||||
rlLldpTLVsTxGroupOverloading OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Boolean Flag, When TRUE indicating that LLDP TLVs were overloaded
|
||||
and the value of left size is negative"
|
||||
::= { rlLldpTLVsTxOverloadingEntry 5 }
|
||||
|
||||
rlLldpTLVsTxLeftSize OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The size in Bytes of the available space left in the LLDPDU after adding the TLVs group.
|
||||
In case the Overloading Flag is TRUE, there not enough space in the LLDPDU for the TLVs group
|
||||
and this is the size of the additional scpace that required for the TLVs group"
|
||||
|
||||
::= { rlLldpTLVsTxOverloadingEntry 6 }
|
||||
|
||||
------------------------------------------------------------------------------
|
||||
-- LLDP - TX TLV overloading Size
|
||||
------------------------------------------------------------------------------
|
||||
|
||||
rlLldpTLVsTxOverloadingSizeTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF RlLldpTLVsTxOverloadingSizeEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A table that show the total size of the all TLVs
|
||||
and the LLDPDU free size ."
|
||||
::= { rlLldpObjects 4 }
|
||||
|
||||
rlLldpTLVsTxOverloadingSizeEntry OBJECT-TYPE
|
||||
SYNTAX RlLldpTLVsTxOverloadingSizeEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"LLDP TX overloading information"
|
||||
INDEX { rlLldpTxOverloadingPortNum }
|
||||
::= { rlLldpTLVsTxOverloadingSizeTable 1 }
|
||||
|
||||
RlLldpTLVsTxOverloadingSizeEntry ::= SEQUENCE {
|
||||
|
||||
-- LLDP Total and Left Size
|
||||
rlLldpTotalTLVsTxSize Unsigned32,
|
||||
rlLldpTLVsTxOverloading TruthValue,
|
||||
rlLldpLeftTLVsTxSize Unsigned32
|
||||
}
|
||||
|
||||
rlLldpTotalTLVsTxSize OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The Total size of all TLVs group in Bytes."
|
||||
::= { rlLldpTLVsTxOverloadingSizeEntry 2 }
|
||||
|
||||
rlLldpTLVsTxOverloading OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Boolean Flag, When TRUE indicating that LLDP TLVs group were overloaded
|
||||
and the value of left size is negative"
|
||||
::= { rlLldpTLVsTxOverloadingSizeEntry 3 }
|
||||
|
||||
rlLldpLeftTLVsTxSize OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" The size in Bytes of the available space left in the LLDPDU after adding all TLVs group.
|
||||
In case the Overloading Flag is TRUE, there not enough space in the LLDPDU for all the TLVs group
|
||||
and this is the size of the additional scpace that required for all the TLVs group"
|
||||
::= { rlLldpTLVsTxOverloadingSizeEntry 4 }
|
||||
|
||||
------------------------------------------------------------------------------
|
||||
-- LLDP - TX TLV overloading port list
|
||||
------------------------------------------------------------------------------
|
||||
|
||||
rlLldpTLVsTxOverloadingPorts OBJECT-TYPE
|
||||
SYNTAX PortList
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Port list that represent the overloading state of each port"
|
||||
::= { rlLldpObjects 5 }
|
||||
|
||||
------------------------------------------------------------------------------
|
||||
-- LLDP - TX TLV overloading trap
|
||||
------------------------------------------------------------------------------
|
||||
rlLldpTLVsTxOverloadingStateEnterTrap NOTIFICATION-TYPE
|
||||
OBJECTS { rndErrorDesc, rndErrorSeverity }
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Informational trap indicating that the port has entered the overloading state."
|
||||
::= { rndNotifications 209 }
|
||||
|
||||
rlLldpTLVsTxOverloadingStateExitTrap NOTIFICATION-TYPE
|
||||
OBJECTS { rndErrorDesc, rndErrorSeverity }
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Informational trap indicating that the port is no longer in the overloading state.."
|
||||
::= { rndNotifications 210 }
|
||||
|
||||
|
||||
------------------------------------------------------------------------------
|
||||
-- LLDP - MED Local Voice VLAN update mode
|
||||
------------------------------------------------------------------------------
|
||||
|
||||
rlLldpXMedNetPolVoiceUpdateMode OBJECT-TYPE
|
||||
SYNTAX PolicyAppVoiceUpdateMode
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
""
|
||||
::= { rlLldpObjects 7 }
|
||||
|
||||
------------------------------------------------------------------------------
|
||||
-- LLDP - Remote Time to Live
|
||||
------------------------------------------------------------------------------
|
||||
|
||||
rlLldpRemTtlTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF RlLldpRemTtlEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table contains the remote device Time To Live LLDP TLV."
|
||||
::= { rlLldpObjects 8 }
|
||||
|
||||
rlLldpRemTtlEntry OBJECT-TYPE
|
||||
SYNTAX RlLldpRemTtlEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"LLDP Time To TTL remove TLV.
|
||||
This uses the key as defind in lldpRemTable of the LLDP-MIB."
|
||||
INDEX { lldpRemTimeMark,
|
||||
lldpRemLocalPortNum,
|
||||
lldpRemIndex }
|
||||
::= { rlLldpRemTtlTable 1 }
|
||||
|
||||
RlLldpRemTtlEntry ::= SEQUENCE {
|
||||
rlLldpRemTtl Unsigned32
|
||||
}
|
||||
|
||||
rlLldpRemTtl OBJECT-TYPE
|
||||
SYNTAX Unsigned32
|
||||
UNITS "seconds"
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object contains the remote device Time To Live LLDP TLV."
|
||||
::= { rlLldpRemTtlEntry 1 }
|
||||
|
||||
rlLldpChassisIdSubtype OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
macAddress(4),
|
||||
local(7)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The type of encoding used to identify the chassis
|
||||
associated with the local system."
|
||||
|
||||
REFERENCE
|
||||
"IEEE 802.1AB-2004 9.5.2.2"
|
||||
DEFVAL { macAddress }
|
||||
::= { rlLldpConfig 5 }
|
||||
|
||||
|
||||
END
|
||||
|
||||
Reference in New Issue
Block a user