david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Initial commit

Browse Source
This commit is contained in:
David Leutgeb
2023-12-05 12:25:34 +01:00
commit 98a672123c
4378 changed files with 8817503 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

579
MIBS/nokia/aos7/ALCATEL-IND1-AUTO-FABRIC-MIB Normal file
View File

@ -0,0 +1,579 @@
ALCATEL-IND1-AUTO-FABRIC-MIB DEFINITIONS ::= BEGIN
IMPORTS
Counter32, Unsigned32, MODULE-IDENTITY, OBJECT-IDENTITY,
NOTIFICATION-TYPE, OBJECT-TYPE
FROM SNMPv2-SMI
InterfaceIndex FROM IF-MIB
MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
FROM SNMPv2-CONF
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
softentIND1AutoFabric FROM ALCATEL-IND1-BASE;
alcatelIND1AUTOFABRICMIB MODULE-IDENTITY
LAST-UPDATED "201211260000Z"
ORGANIZATION "Alcatel - Architects Of An Internet World"
CONTACT-INFO
"Please consult with Customer Service to insure the most appropriate
version of this document is used with the products in question:
Alcatel Internetworking, Incorporated
(Division 1, Formerly XYLAN Corporation)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://www.ind.alcatel.com
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
AUTOFABRIC for automatic detection and configuration of LACP, SPB and MVRP.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "201211250000Z"
DESCRIPTION
"The AUTOFABRIC MIB defines a set of AUTOFABRIC related management objects for ports
that support Autofabric feature. AUTOFABRIC as a
feature provides mechanisms to automatically detect and configure LACP aggregates, SPB adjacencies
and enables MVRP for automatically learning VLANs advertised by other switches
This MIB comprises proprietary managed objects as well the objects required
for conforming to the feature."
::= { softentIND1AutoFabric 1}
-- --------------------------------------------------------------
alcatelIND1AUTOFABRICMIBNotifications OBJECT IDENTIFIER ::= { alcatelIND1AUTOFABRICMIB 0 }
alcatelIND1AUTOFABRICMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For AUTO-FABRIC
Subsystem Managed Objects."
::= { alcatelIND1AUTOFABRICMIB 1 }
alcatelIND1AUTOFABRICMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for AUTOFABRIC Module MIB Subsystem Conformance Information."
::= { alcatelIND1AUTOFABRICMIB 2 }
alcatelIND1AUTOFABRICMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for AUTOFABRIC Module MIB Subsystem Units of Conformance."
::= { alcatelIND1AUTOFABRICMIBConformance 1 }
alcatelIND1AUTOFABRICMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch for AUTOFABRIC Module MIB Subsystem Compliance Statements."
::= { alcatelIND1AUTOFABRICMIBConformance 2 }
-- --------------------------------------------------------------
-- --------------------------------------------------------------
-- AUTO-FABRIC MIB
-- --------------------------------------------------------------
alaAutoFabricGlobalStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to enable or diable Autofabric on the switch.
The value enable (1) indicates that Autofabric should be enabled on
the switch. The value disable (2) is used to disable Autofabric on
the switch. By default, Autofabric is enabled on the switch."
DEFVAL { enable }
::= { alcatelIND1AUTOFABRICMIBObjects 1 }
alaAutoFabricGlobalDiscovery OBJECT-TYPE
SYNTAX INTEGER {
default(1),
restart(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the global discovery window control for Autofabric.
The value restart (2) indicates that Autofabric should restart
global discovery window.
By default, this object contains a zero value."
DEFVAL { default }
::= { alcatelIND1AUTOFABRICMIBObjects 2 }
alaAutoFabricGlobalLACPProtocolStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to enable or diable AutoFabric LACP discovery.
on the switch. The value enable (1) indicates that during discovery
the switch will attempt to create LACP link aggregates. The value
disable (2) indicates that there would be no attempt to create LACP
link aggregates during the discovery phase. By default LACP is enabled
on the switch"
DEFVAL { enable }
::= { alcatelIND1AUTOFABRICMIBObjects 3 }
alaAutoFabricGlobalSPBProtocolStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to enable or diable AutoFabric SPB discovery.
on the switch. The value enable (1) indicates that during discovery
the switch will attempt to create SPB adjacencies. The value
disable (2) indicates that there would be no attempt to create SPB
adjacencies during the discovery phase. By default SPB is enabled
on the switch"
DEFVAL { enable }
::= { alcatelIND1AUTOFABRICMIBObjects 4 }
alaAutoFabricGlobalMVRPProtocolStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to enable or diable AutoFabric MVRP discovery.
on the switch. The value enable (1) indicates that during discovery
the switch will enable MVRP and attempt to propagate and learn VLANs.
The value disable (2) indicates that MVRP would not be enabled in
discovery phase. By default MVRP is enabled on the switch"
DEFVAL { enable }
::= { alcatelIND1AUTOFABRICMIBObjects 5 }
alaAutoFabricGlobalConfigSaveTimer OBJECT-TYPE
SYNTAX Unsigned32 ( 60 .. 3600 )
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum period of time after which configuration built up by AutoFabric
would get written to the boot.cfg or vcboot.cfg.
The range supported is 60-3600 seconds."
DEFVAL { 300 }
::= { alcatelIND1AUTOFABRICMIBObjects 6 }
alaAutoFabricGlobalConfigSaveTimerStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to enable or diable AutoFabric config save
timer on the switch. The value enable (1) indicates that
after the expiry of the config save timer, all AutoFabric
configurations would get written to the boot.cfg ot the vcboot.cfg
The value disable (2) would disable the config save timer.
By default it is enabled"
DEFVAL { enable }
::= { alcatelIND1AUTOFABRICMIBObjects 7 }
alaAutoFabricGlobalDiscoveryTimer OBJECT-TYPE
SYNTAX Unsigned32 ( 0 .. 3600 )
UNITS "Minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to specify auto-fabric auto
discovery interval, zero disables it, configurable
Value is from 2 to 3600 minutes."
DEFVAL { 0 }
::= { alcatelIND1AUTOFABRICMIBObjects 8 }
alaAutoFabricRemoveGlobalConfig OBJECT-TYPE
SYNTAX INTEGER {
default(1),
removeGlobalConfig(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This variable is used to remove the auto fabric global configuration when the user chooses to disable auto fabric"
DEFVAL { default }
::= { alcatelIND1AUTOFABRICMIBObjects 10 }
alaAutoFabricGlobalOSPFv2ProtocolStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to enable or disable auto configuration on the
OSPFv2 IP Protocol on the switch. "
DEFVAL { enable }
::= { alcatelIND1AUTOFABRICMIBObjects 11 }
alaAutoFabricGlobalOSPFv3ProtocolStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to enable or disable auto configuration on the
OSPFv3 IP Protocol on the switch. "
DEFVAL { enable }
::= { alcatelIND1AUTOFABRICMIBObjects 12 }
alaAutoFabricGlobalISISProtocolStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to enable or disable auto configuration on the
ISIS IP Protocol on the switch. "
DEFVAL { enable }
::= { alcatelIND1AUTOFABRICMIBObjects 13 }
alaAutoFabricSPBDefaultProfile OBJECT-TYPE
SYNTAX INTEGER {
singleService(1),
autoVlan(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the default SAP profile used in the Omni switch.
singleService: defines single service SAP profiles.
autoVlan: AOS will generate SAP bindings for VLANS concerned automatically"
DEFVAL { autoVlan }
::= { alcatelIND1AUTOFABRICMIBObjects 14 }
alaAutoFabricLBDProtocolStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to enable or disable AutoFabric LBD on SAP port
on the switch. The value enable (1) indicates that during discovery
the switch will enable Loopback detection on UNP SAP port.
The value disable (2) indicates that Loobback detection will not be enabled
on UNP SAP port discovery"
DEFVAL { enable }
::= { alcatelIND1AUTOFABRICMIBObjects 15 }
alaAutoFabricRemoveVCReload OBJECT-TYPE
SYNTAX INTEGER {
default(1),
removeVCReload(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is applicable only for Standalone configuration.
It reloads the unit as a Standalone when the user chooses to disable auto fabric."
DEFVAL { default }
::= { alcatelIND1AUTOFABRICMIBObjects 17 }
-- -------------------------------------------------------------
-- AUTO-FABRIC Port Config Table
-- -------------------------------------------------------------
-- DESCRIPTION:
-- "Port configuration information
-- data for the AUTO-FABRIC Module.
-- Implementation of this group is mandantory"
alaAutoFabricPortConfig OBJECT IDENTIFIER ::= { alcatelIND1AUTOFABRICMIBObjects 9 }
alaAutoFabricPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaAutoFabricPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing Autofabric port configuration information."
::= { alaAutoFabricPortConfig 1 }
alaAutoFabricPortConfigEntry OBJECT-TYPE
SYNTAX AlaAutoFabricPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An AutoFabric port configuration entry."
INDEX { alaAutoFabricPortConfigIfIndex }
::= { alaAutoFabricPortConfigTable 1 }
AlaAutoFabricPortConfigEntry ::= SEQUENCE {
alaAutoFabricPortConfigIfIndex InterfaceIndex,
alaAutoFabricPortConfigStatus INTEGER,
alaAutoFabricPortLACPProtocolStatus INTEGER,
alaAutoFabricPortSPBProtocolStatus INTEGER,
alaAutoFabricPortMVRPProtocolStatus INTEGER,
alaAutoFabricPortStatus INTEGER,
alaAutoFabricPortSPBDefaultProfile INTEGER
}
alaAutoFabricPortConfigIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifindex of the port on which AutoFabric is running"
::= { alaAutoFabricPortConfigEntry 1 }
alaAutoFabricPortConfigStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to enable or diable AutoFabric on the interface.
The value enable (1) indicates that AutoFabric should be enabled on
the interface. The value disable (2) is used to disable AutoFabric on
the interface. By default, AutoFabric is enabled on the interface."
DEFVAL { enable }
::= { alaAutoFabricPortConfigEntry 2 }
alaAutoFabricPortLACPProtocolStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to enable LACP in the AutoFabric discovery
on this port. The value enable (1) indicates during discovery window
this port will attempt to form LACP link aggregates. The value disable (2)
indicates this port will not participate in LACP discovery phase.
By default it is enabled"
DEFVAL { enable }
::= { alaAutoFabricPortConfigEntry 3 }
alaAutoFabricPortSPBProtocolStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to enable SPB in the AutoFabric discovery
on this port. The value enable (1) indicates during discovery window
this port will attempt to form SPB adjacencies. The value disable (2)
indicates this port will not participate in SPB discovery phase.
By default it is enabled"
DEFVAL { enable }
::= { alaAutoFabricPortConfigEntry 4 }
alaAutoFabricPortMVRPProtocolStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to enable MVRP in the AutoFabric discovery
on this port. The value enable (1) indicates during discovery window
this port will enable MVRP and attempt to learn and propagate VLANs.
The value disable (2) indicates this port will not participate in MVRP
discovery phase.
By default it is enabled"
DEFVAL { enable }
::= { alaAutoFabricPortConfigEntry 5 }
alaAutoFabricPortStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled (1),
pending (2),
complete (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the Autofabric discovery window on the port."
::= { alaAutoFabricPortConfigEntry 6 }
alaAutoFabricPortSPBDefaultProfile OBJECT-TYPE
SYNTAX INTEGER {
singleService(1),
autoVlan(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the default SAP profile used on a particular port in the switch.
singleService: defines single service SAP profiles.
autoVlan: AOS will generate SAP bindings for VLANS concerned automatically."
DEFVAL { autoVlan }
::= { alaAutoFabricPortConfigEntry 7 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaAutoFabricTrapsObj OBJECT IDENTIFIER ::= { alcatelIND1AUTOFABRICMIBObjects 16 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaAutoFabricSTPMode OBJECT-TYPE
SYNTAX INTEGER {
flatMode(1),
perVlan(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the change in STP Mode, to Flat or 1X1, due to the change in Auto-Fabric admin-status."
::= { alaAutoFabricTrapsObj 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- Trap Description
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaAutoFabricSTPModeChangeAlert NOTIFICATION-TYPE
OBJECTS {
alaAutoFabricSTPMode
}
STATUS current
DESCRIPTION
"This trap is sent when auto-fabric changes STP mode."
::= { alcatelIND1AUTOFABRICMIBNotifications 1 }
-- -------------------------------------------------------------
-- COMPLIANCE
-- -------------------------------------------------------------
alcatelIND1AUTOFABRICMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for AUTOFABRIC."
MODULE
MANDATORY-GROUPS
{
alaAutoFabricBaseGroup,
alaAutoFabricPortConfigGroup,
alaAutoFabricNotificationGroup,
alaAutoFabricTrapsObjGroup
}
::= { alcatelIND1AUTOFABRICMIBCompliances 1 }
-- -------------------------------------------------------------
-- UNITS OF CONFORMANCE
-- -------------------------------------------------------------
alaAutoFabricBaseGroup OBJECT-GROUP
OBJECTS
{
alaAutoFabricGlobalStatus,
alaAutoFabricGlobalDiscovery,
alaAutoFabricGlobalLACPProtocolStatus,
alaAutoFabricGlobalSPBProtocolStatus,
alaAutoFabricGlobalMVRPProtocolStatus,
alaAutoFabricGlobalConfigSaveTimer,
alaAutoFabricGlobalConfigSaveTimerStatus,
alaAutoFabricGlobalDiscoveryTimer,
alaAutoFabricRemoveGlobalConfig,
alaAutoFabricGlobalOSPFv2ProtocolStatus,
alaAutoFabricGlobalOSPFv3ProtocolStatus,
alaAutoFabricGlobalISISProtocolStatus,
alaAutoFabricSPBDefaultProfile,
alaAutoFabricLBDProtocolStatus,
alaAutoFabricRemoveVCReload
}
STATUS current
DESCRIPTION
"Collection of objects for management of AutoFabric Base Group."
::= { alcatelIND1AUTOFABRICMIBGroups 1 }
alaAutoFabricPortConfigGroup OBJECT-GROUP
OBJECTS
{
alaAutoFabricPortConfigStatus,
alaAutoFabricPortLACPProtocolStatus,
alaAutoFabricPortSPBProtocolStatus,
alaAutoFabricPortMVRPProtocolStatus,
alaAutoFabricPortStatus,
alaAutoFabricPortSPBDefaultProfile
}
STATUS current
DESCRIPTION
"Collection of objects for management of AutoFabric Port Configuration Table."
::= { alcatelIND1AUTOFABRICMIBGroups 2 }
alaAutoFabricNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
alaAutoFabricSTPModeChangeAlert
}
STATUS current
DESCRIPTION
"Collection of notifications for Auto-Fabric."
::= { alcatelIND1AUTOFABRICMIBGroups 3 }
alaAutoFabricTrapsObjGroup OBJECT-GROUP
OBJECTS {
alaAutoFabricSTPMode
}
STATUS current
DESCRIPTION
"Collection of notificating objects for Auto-Fabric."
::= { alcatelIND1AUTOFABRICMIBGroups 4 }
-- -------------------------------------------------------------
END