Initial commit
This commit is contained in:
883
MIBS/nokia/aos7/ALCATEL-IND1-ERP-MIB
Normal file
883
MIBS/nokia/aos7/ALCATEL-IND1-ERP-MIB
Normal file
@ -0,0 +1,883 @@
|
||||
ALCATEL-IND1-ERP-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
IMPORTS
|
||||
Counter32, Unsigned32, MODULE-IDENTITY, OBJECT-IDENTITY,
|
||||
NOTIFICATION-TYPE, OBJECT-TYPE, TimeTicks, Integer32
|
||||
FROM SNMPv2-SMI
|
||||
InterfaceIndexOrZero, InterfaceIndex
|
||||
FROM IF-MIB
|
||||
VlanId FROM Q-BRIDGE-MIB
|
||||
MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
|
||||
FROM SNMPv2-CONF
|
||||
TimeStamp, RowStatus, TEXTUAL-CONVENTION, TruthValue
|
||||
FROM SNMPv2-TC
|
||||
softentIND1Erp FROM ALCATEL-IND1-BASE
|
||||
SnmpAdminString FROM SNMP-FRAMEWORK-MIB;
|
||||
|
||||
|
||||
|
||||
alcatelIND1ERPMIB MODULE-IDENTITY
|
||||
LAST-UPDATED "201106150000Z" -- 06/15/2011 00:00 GMT
|
||||
ORGANIZATION "Alcatel-Lucent"
|
||||
CONTACT-INFO
|
||||
"Please consult with Customer Service to insure the most appropriate
|
||||
version of this document is used with the products in question:
|
||||
|
||||
Alcatel-Lucent, Enterprise Solutions Division
|
||||
(Formerly Alcatel Internetworking, Incorporated)
|
||||
26801 West Agoura Road
|
||||
Agoura Hills, CA 91301-5122
|
||||
United States Of America
|
||||
|
||||
Telephone: North America +1 800 995 2696
|
||||
Latin America +1 877 919 9526
|
||||
Europe +31 23 556 0100
|
||||
Asia +65 394 7933
|
||||
All Other +1 818 878 4507
|
||||
|
||||
Electronic Mail: support@ind.alcatel.com
|
||||
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
|
||||
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
|
||||
|
||||
DESCRIPTION
|
||||
"This module describes an authoritative enterprise-specific Simple
|
||||
Network Management Protocol (SNMP) Management Information Base (MIB):
|
||||
|
||||
For the Birds Of Prey Product Line
|
||||
ERP Switching is protection switching mechanism for ETH Layer Ethernet Ring
|
||||
topologies.
|
||||
|
||||
The right to make changes in specification and other information
|
||||
contained in this document without prior notice is reserved.
|
||||
|
||||
No liability shall be assumed for any incidental, indirect, special, or
|
||||
consequential damages whatsoever arising from or related to this
|
||||
document or the information contained herein.
|
||||
|
||||
Vendors, end-users, and other interested parties are granted
|
||||
non-exclusive license to use this specification in connection with
|
||||
management of the products for which it is intended to be used.
|
||||
|
||||
Copyright (C) 1995-2008 Alcatel-Lucent, Incorporated
|
||||
ALL RIGHTS RESERVED WORLDWIDE"
|
||||
|
||||
REVISION "201005130000Z"
|
||||
DESCRIPTION
|
||||
"Fixed the Notifications to use MIB Module OID.0 as Notifications root."
|
||||
|
||||
REVISION "200807100000Z"
|
||||
DESCRIPTION
|
||||
"The ERP MIB defines a set of ERP related management objects for ports
|
||||
that support Ethernet Ring Protection (ERP) Switching Protocol for ETH
|
||||
Layer Ring Topologies. With this, rapid protection switching of 50ms can
|
||||
be achieved.
|
||||
|
||||
This MIB comprises proprietary managed objects as well the objects required
|
||||
for conforming to the protocol."
|
||||
::= { softentIND1Erp 1}
|
||||
|
||||
|
||||
-- This MIB contains the following groups
|
||||
|
||||
alcatelIND1ErpMIBNotifications OBJECT-IDENTITY
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Branch For ERP MIB Subsystem Notifications."
|
||||
::= { alcatelIND1ERPMIB 0 }
|
||||
|
||||
alcatelIND1ERPMIBObjects OBJECT-IDENTITY
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Branch For ERP
|
||||
Subsystem Managed Objects."
|
||||
::= { alcatelIND1ERPMIB 1 }
|
||||
|
||||
alcatelIND1ERPMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1ERPMIB 2 }
|
||||
|
||||
-- alcatelIND1ERPMIBObjects contains following groups
|
||||
alaErpGlobal OBJECT IDENTIFIER ::= {alcatelIND1ERPMIBObjects 1}
|
||||
alaErpRingAttributes OBJECT IDENTIFIER ::= {alcatelIND1ERPMIBObjects 2}
|
||||
|
||||
|
||||
-- ******************************************************************
|
||||
-- Textual conventions
|
||||
-- ******************************************************************
|
||||
|
||||
AlaErpRingPortStatus ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Indicates the status of the Ring Port.
|
||||
|
||||
forwarding(1) Status is forwarding.
|
||||
blocking(2) Status is blocking."
|
||||
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
forwarding (1),
|
||||
blocking (2)
|
||||
}
|
||||
|
||||
AlaErpRingPortType ::= TEXTUAL-CONVENTION
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Indicates the type of the Ring Port.
|
||||
|
||||
nonRpl(1) Port is Non-RPL Port.
|
||||
rpl(2) Port is RPL Port. Node is RPL Owner for the Ring."
|
||||
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
nonRpl (1),
|
||||
rpl (2)
|
||||
}
|
||||
|
||||
AlaErpRingMepId ::= TEXTUAL-CONVENTION
|
||||
DISPLAY-HINT "d"
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Maintenance association End Point Identifier (MEPID): A small
|
||||
integer, unique over a given Maintenance Association,
|
||||
identifying a specific MEP."
|
||||
|
||||
REFERENCE
|
||||
"802.1ag clauses 3.18 and 19.2.1"
|
||||
|
||||
SYNTAX Unsigned32 (1..8191)
|
||||
|
||||
AlaErpRingMEGLevel ::= TEXTUAL-CONVENTION
|
||||
DISPLAY-HINT "d"
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"MEG level of the R-APS PDU to be inserted."
|
||||
|
||||
SYNTAX Unsigned32 (0..7)
|
||||
|
||||
|
||||
-- ******************************************************************
|
||||
-- ERP Global Variables
|
||||
-- ******************************************************************
|
||||
|
||||
|
||||
alaErpClearStats OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
default(0),
|
||||
reset(1)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Defines the global clear statistics control for ERP.
|
||||
The value reset (1) indicates that ERP should clear all
|
||||
statistics related to all the rings in the system.
|
||||
By default, this object contains a zero value."
|
||||
DEFVAL { default }
|
||||
::= { alaErpGlobal 1 }
|
||||
|
||||
-- ******************************************************************
|
||||
-- ERP Ring Table
|
||||
-- ******************************************************************
|
||||
|
||||
alaErpRingTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF AlaErpRingEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"There is one ERP Ring table per bridge. It permits
|
||||
the configuration of Ring."
|
||||
::= { alaErpRingAttributes 1 }
|
||||
|
||||
alaErpRingEntry OBJECT-TYPE
|
||||
SYNTAX AlaErpRingEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The ERP Ring table entry."
|
||||
INDEX { alaErpRingId }
|
||||
::= { alaErpRingTable 1 }
|
||||
|
||||
AlaErpRingEntry ::= SEQUENCE {
|
||||
alaErpRingId Integer32,
|
||||
alaErpRingServiceVid VlanId,
|
||||
alaErpRingMEGLevel AlaErpRingMEGLevel,
|
||||
alaErpRingPort1 InterfaceIndex,
|
||||
alaErpRingPort2 InterfaceIndexOrZero,
|
||||
alaErpRingStatus INTEGER,
|
||||
alaErpRingState INTEGER,
|
||||
alaErpRingWaitToRestoreTimer Unsigned32,
|
||||
alaErpRingGuardTimer Integer32,
|
||||
alaErpRingClearStats INTEGER,
|
||||
alaErpRingLastStateChange TimeStamp,
|
||||
alaErpRingTimeToRevert TimeTicks,
|
||||
alaErpRingRowStatus RowStatus,
|
||||
alaErpRingVirtualChannel INTEGER,
|
||||
alaErpRingRevertive INTEGER,
|
||||
alaErpRingClearAction INTEGER,
|
||||
alaErpRingActiveVersion Unsigned32,
|
||||
alaErpRingResetVersionFallback INTEGER,
|
||||
alaErpRingLastStateChangeStr SnmpAdminString
|
||||
}
|
||||
|
||||
alaErpRingId OBJECT-TYPE
|
||||
SYNTAX Integer32 (1 .. 2147483647)
|
||||
MAX-ACCESS accessible-for-notify
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Ring identifier that is unique in the bridge."
|
||||
::= { alaErpRingEntry 1 }
|
||||
|
||||
alaErpRingServiceVid OBJECT-TYPE
|
||||
SYNTAX VlanId
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An integer indicating the VID of Service VLAN. All the ERP
|
||||
control traffic will flow with Service VLAN tag across the
|
||||
ring. This object must be specified while creating a row in
|
||||
this table. Once the row has been created, the value of
|
||||
this object cannot be changed."
|
||||
::= { alaErpRingEntry 2 }
|
||||
|
||||
alaErpRingMEGLevel OBJECT-TYPE
|
||||
SYNTAX AlaErpRingMEGLevel
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"MEG level of the R-APS PDU to be inserted for this Ring.
|
||||
This object must be specified while creating a row in
|
||||
this table. Once the row has been created, the value of
|
||||
this object cannot be changed."
|
||||
::= { alaErpRingEntry 3 }
|
||||
|
||||
alaErpRingPort1 OBJECT-TYPE
|
||||
SYNTAX InterfaceIndex
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object is the interface index of the ring port,which is
|
||||
either a bridge port, or an aggregated link within a bridge,
|
||||
on which ring is configured.
|
||||
There can be only two ring ports per ring in a bridge.
|
||||
This object must be specified while creating a row in
|
||||
this table. Once the row has been created, the value of
|
||||
this object cannot be changed."
|
||||
::= { alaErpRingEntry 4 }
|
||||
|
||||
alaErpRingPort2 OBJECT-TYPE
|
||||
SYNTAX InterfaceIndexOrZero
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object is the interface index of the ring port,which is
|
||||
either a bridge port, or an aggregated link within a bridge,
|
||||
on which ring is configured.
|
||||
In case of sub-ring, this will be zero. And that is the
|
||||
indicator of sub-ring.
|
||||
This object must be specified while creating a row in
|
||||
this table. Once the row has been created, the value of
|
||||
this object cannot be changed."
|
||||
::= { alaErpRingEntry 5 }
|
||||
|
||||
alaErpRingStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enabled(1),
|
||||
disabled(2)
|
||||
}
|
||||
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An Integer value indicating the administrative state of the Ring.
|
||||
|
||||
enabled indicates that the Ring is to function normally, and
|
||||
disabled that it is to cease functioning."
|
||||
DEFVAL { disabled }
|
||||
::= { alaErpRingEntry 6 }
|
||||
|
||||
alaErpRingState OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
idle (0),
|
||||
protection (1),
|
||||
init (2),
|
||||
manualSwitch (3),
|
||||
forcedSwitch (4),
|
||||
pending (5)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The current state of the Ring."
|
||||
::= { alaErpRingEntry 7 }
|
||||
|
||||
alaErpRingWaitToRestoreTimer OBJECT-TYPE
|
||||
SYNTAX Unsigned32 ( 0 .. 12)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object is valid only for RPL Node.
|
||||
|
||||
This timer is started to prevent frequent operation switch due
|
||||
to an intermittent defect.
|
||||
|
||||
It may be configured by the operator in 1 minute steps between
|
||||
0 and 12 minutes."
|
||||
DEFVAL { 5 }
|
||||
::= { alaErpRingEntry 8 }
|
||||
|
||||
alaErpRingGuardTimer OBJECT-TYPE
|
||||
SYNTAX Integer32 ( 1 .. 200)
|
||||
UNITS "10 milliseconds"
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Defines the guard timer value in centiseconds.
|
||||
|
||||
This timer is started to prevent the ring nodes from receiving
|
||||
outdated R-APS messages.
|
||||
|
||||
It may be configured by the operator in 10 ms steps between
|
||||
10 ms to 2 seconds."
|
||||
DEFVAL { 50 }
|
||||
::= { alaErpRingEntry 9 }
|
||||
|
||||
alaErpRingClearStats OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
default(0),
|
||||
reset(1)
|
||||
}
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Defines per ring clear statistics control for ERP.
|
||||
The value reset (1) indicates that ERP should clear all
|
||||
statistics related to a ring in the system.By default,
|
||||
this object contains a zero value."
|
||||
DEFVAL { default }
|
||||
::= { alaErpRingEntry 10 }
|
||||
|
||||
|
||||
alaErpRingLastStateChange OBJECT-TYPE
|
||||
SYNTAX TimeStamp
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The time (SysUpTime) at which the ethernet ring last
|
||||
entered new state. : This object has been deprecated Please refer
|
||||
alaErpRingLastStateChangeStr. "
|
||||
::= { alaErpRingEntry 11 }
|
||||
|
||||
alaErpRingTimeToRevert OBJECT-TYPE
|
||||
SYNTAX TimeTicks
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Defines the time left to revert from Pending State to Idle State."
|
||||
::= {alaErpRingEntry 12}
|
||||
|
||||
alaErpRingRowStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The status of the row.
|
||||
|
||||
The writable columns in a row can not be changed if the row
|
||||
is active. All columns must have a valid value before a row
|
||||
can be activated."
|
||||
::= { alaErpRingEntry 13 }
|
||||
|
||||
alaErpRingVirtualChannel OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enabled(1),
|
||||
disabled(2)
|
||||
}
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A Integer value indicating whether the ring is operating with the
|
||||
Virtual channel enabled or not."
|
||||
DEFVAL { enabled }
|
||||
::= { alaErpRingEntry 14 }
|
||||
|
||||
alaErpRingRevertive OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enabled(1),
|
||||
disabled(2)
|
||||
}
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A Integer value indicating whether the ring is operating with the
|
||||
revertive mode enabled or not "
|
||||
DEFVAL { enabled }
|
||||
::= { alaErpRingEntry 15 }
|
||||
|
||||
alaErpRingClearAction OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
default(0),
|
||||
reset(1)
|
||||
}
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Defines clear action for ERP ring
|
||||
The value reset(1) will give CLEAR action to ERP state machine"
|
||||
DEFVAL { default }
|
||||
::= { alaErpRingEntry 16 }
|
||||
|
||||
|
||||
alaErpRingActiveVersion OBJECT-TYPE
|
||||
SYNTAX Unsigned32 ( 1 .. 2)
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object indicates active ERP Ring protocol version."
|
||||
::= { alaErpRingEntry 17 }
|
||||
|
||||
|
||||
alaErpRingResetVersionFallback OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
default(0),
|
||||
reset(1)
|
||||
}
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Resets ERP running protocol"
|
||||
DEFVAL { default }
|
||||
::= { alaErpRingEntry 18 }
|
||||
|
||||
|
||||
alaErpRingLastStateChangeStr OBJECT-TYPE
|
||||
SYNTAX SnmpAdminString (SIZE (0..255))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The time (SysUpTime) at which the ethernet ring last
|
||||
entered new state."
|
||||
::= { alaErpRingEntry 19 }
|
||||
|
||||
|
||||
|
||||
|
||||
-- ******************************************************************
|
||||
-- The ERP RING Port Table
|
||||
-- ******************************************************************
|
||||
|
||||
alaErpRingPortTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF AlaErpRingPortEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"There is one ERP Ring Port table per bridge. It permits
|
||||
the configuration of Ring Ports."
|
||||
::= { alaErpRingAttributes 2 }
|
||||
|
||||
alaErpRingPortEntry OBJECT-TYPE
|
||||
SYNTAX AlaErpRingPortEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The ERP Ring Port table entry."
|
||||
INDEX { alaErpRingId, alaErpRingPortIfIndex }
|
||||
::= { alaErpRingPortTable 1 }
|
||||
|
||||
AlaErpRingPortEntry ::= SEQUENCE {
|
||||
alaErpRingPortIfIndex InterfaceIndex,
|
||||
alaErpRingPortStatus AlaErpRingPortStatus,
|
||||
alaErpRingPortType AlaErpRingPortType,
|
||||
alaErpRingPortEthOAMEvent TruthValue,
|
||||
alaErpRingPortClearStats INTEGER,
|
||||
alaErpRingPortRmepId AlaErpRingMepId,
|
||||
alaErpRingPortVirtualSfMonitor TruthValue
|
||||
}
|
||||
|
||||
alaErpRingPortIfIndex OBJECT-TYPE
|
||||
SYNTAX InterfaceIndex
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This object is the interface index of the interface either a
|
||||
bridge port, or an aggregated link within a bridge port, to
|
||||
which ring port is configured.
|
||||
There can be only two ring ports per ring in a bridge."
|
||||
::= { alaErpRingPortEntry 1 }
|
||||
|
||||
alaErpRingPortStatus OBJECT-TYPE
|
||||
SYNTAX AlaErpRingPortStatus
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Status of the Ring Port."
|
||||
DEFVAL { blocking }
|
||||
::= { alaErpRingPortEntry 2 }
|
||||
|
||||
alaErpRingPortType OBJECT-TYPE
|
||||
SYNTAX AlaErpRingPortType
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Type of the Ring Port.
|
||||
|
||||
To configure a node as a RPL owner for the ring, this object
|
||||
has value of RPL(2)."
|
||||
DEFVAL { nonRpl }
|
||||
::= { alaErpRingPortEntry 3 }
|
||||
|
||||
alaErpRingPortEthOAMEvent OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A Boolean indicating whether ERP Ring Port shall take loss of
|
||||
connectivity event from Ethernet OAM.
|
||||
|
||||
True indicates that the Ring Port is to take events from
|
||||
Ethernet OAM."
|
||||
DEFVAL { false }
|
||||
::= { alaErpRingPortEntry 4 }
|
||||
|
||||
alaErpRingPortClearStats OBJECT-TYPE
|
||||
SYNTAX INTEGER
|
||||
{
|
||||
default(0),
|
||||
reset(1)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Defines per ring port clear statistics control for ERP.
|
||||
The value reset (1) indicates that ERP should clear all
|
||||
statistics related to a ring port in the system.By default,
|
||||
this object contains a zero value."
|
||||
DEFVAL { default }
|
||||
::= { alaErpRingPortEntry 5 }
|
||||
|
||||
alaErpRingPortRmepId OBJECT-TYPE
|
||||
SYNTAX AlaErpRingMepId
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Identifier of Remote Endpoint."
|
||||
::= { alaErpRingPortEntry 6 }
|
||||
|
||||
alaErpRingPortVirtualSfMonitor OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A Boolean indicating whether ERP Ring Port shall take loss of
|
||||
connectivity event from Virtual SF monitor protocol.
|
||||
|
||||
True indicates that the Ring Port is to take events from
|
||||
Virtual SF monitor."
|
||||
DEFVAL { false }
|
||||
::= { alaErpRingPortEntry 7 }
|
||||
|
||||
|
||||
-- ******************************************************************
|
||||
-- The ERP VLAN Table
|
||||
-- ******************************************************************
|
||||
|
||||
alaErpRingVlanTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF AlaErpRingVlanEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table defines the association of VIDs and RingIds.
|
||||
|
||||
The writable objects in this table need to be persistent
|
||||
upon reboot or restart of a device."
|
||||
::= { alaErpRingAttributes 3 }
|
||||
|
||||
alaErpRingVlanEntry OBJECT-TYPE
|
||||
SYNTAX AlaErpRingVlanEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The VLAN table entry."
|
||||
INDEX { alaErpRingId, alaErpRingVlanProtectedVid }
|
||||
::= { alaErpRingVlanTable 1 }
|
||||
|
||||
AlaErpRingVlanEntry ::= SEQUENCE {
|
||||
alaErpRingVlanProtectedVid VlanId,
|
||||
alaErpRingVlanRowStatus RowStatus
|
||||
}
|
||||
|
||||
alaErpRingVlanProtectedVid OBJECT-TYPE
|
||||
SYNTAX VlanId
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An integer indicating the VID of Protected VLAN."
|
||||
::= { alaErpRingVlanEntry 1 }
|
||||
|
||||
alaErpRingVlanRowStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The status of the row.
|
||||
|
||||
The writable columns in a row can not be changed if the row
|
||||
is active. All columns must have a valid value before a row
|
||||
can be activated."
|
||||
::= { alaErpRingVlanEntry 2 }
|
||||
|
||||
-- ******************************************************************
|
||||
-- The ERP Statistics Table
|
||||
-- ******************************************************************
|
||||
|
||||
alaErpStatsTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF AlaErpStatsEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"There is one ERP Stats table per bridge. This table
|
||||
contains the statistics for the ERP on per Ring basis."
|
||||
::= { alaErpRingAttributes 4 }
|
||||
|
||||
alaErpStatsEntry OBJECT-TYPE
|
||||
SYNTAX AlaErpStatsEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The Statistics table entry."
|
||||
AUGMENTS { alaErpRingPortEntry }
|
||||
::= { alaErpStatsTable 1 }
|
||||
|
||||
AlaErpStatsEntry ::= SEQUENCE {
|
||||
alaErpStatsSignalFailPduTx Counter32,
|
||||
alaErpStatsSignalFailPduRx Counter32,
|
||||
alaErpStatsSignalFailPduDrop Counter32,
|
||||
alaErpStatsNoRequestPduTx Counter32,
|
||||
alaErpStatsNoRequestPduRx Counter32,
|
||||
alaErpStatsNoRequestPduDrop Counter32,
|
||||
alaErpStatsRPLBlockPDUTx Counter32,
|
||||
alaErpStatsRPLBlockPDURx Counter32,
|
||||
alaErpStatsRPLBlockPDUDrop Counter32,
|
||||
alaErpStatsPDUErr Counter32
|
||||
}
|
||||
|
||||
alaErpStatsSignalFailPduTx OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A count of the number of R-APS (SF) PDUs transmitted on this
|
||||
interface for this Ring."
|
||||
::= { alaErpStatsEntry 1 }
|
||||
|
||||
alaErpStatsSignalFailPduRx OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A count of the number of valid R-APS (SF) PDUs received on this
|
||||
interface for this Ring."
|
||||
::= { alaErpStatsEntry 2 }
|
||||
|
||||
alaErpStatsSignalFailPduDrop OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A count of the number of valid R-APS (SF) PDUs dropped."
|
||||
::= { alaErpStatsEntry 3 }
|
||||
|
||||
|
||||
alaErpStatsNoRequestPduTx OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A count of the number of R-APS (NR) PDUs transmitted on this
|
||||
interface for this Ring."
|
||||
::= { alaErpStatsEntry 4 }
|
||||
|
||||
alaErpStatsNoRequestPduRx OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A count of the number of valid R-APS (NR) PDUs received on this
|
||||
interface for this Ring."
|
||||
::= { alaErpStatsEntry 5 }
|
||||
|
||||
alaErpStatsNoRequestPduDrop OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A count of the number of valid R-APS (NR) PDUs dropped."
|
||||
::= { alaErpStatsEntry 6 }
|
||||
|
||||
alaErpStatsRPLBlockPDUTx OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A count of the number of R-APS (NR, RB) PDUs transmitted on this
|
||||
interface for this Ring."
|
||||
::= { alaErpStatsEntry 7 }
|
||||
|
||||
alaErpStatsRPLBlockPDURx OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A count of the number of valid R-APS (NR, RB) PDUs received on this
|
||||
interface for this Ring."
|
||||
::= { alaErpStatsEntry 8 }
|
||||
|
||||
alaErpStatsRPLBlockPDUDrop OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A count of the number of valid R-APS (NR, RB) PDUs dropped."
|
||||
::= { alaErpStatsEntry 9 }
|
||||
|
||||
alaErpStatsPDUErr OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A count of the number of error R-APS PDUs received."
|
||||
::= { alaErpStatsEntry 10 }
|
||||
|
||||
-- ******************************************************************
|
||||
-- NOTIFICATIONS (TRAPS)
|
||||
-- ******************************************************************
|
||||
|
||||
alaErpRingStateChanged NOTIFICATION-TYPE
|
||||
OBJECTS {
|
||||
alaErpRingId,
|
||||
alaErpRingState
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The ERP Ring State has changed to Protection from Idle. Notify the user by
|
||||
raising the Trap. "
|
||||
::= { alcatelIND1ErpMIBNotifications 1 }
|
||||
|
||||
alaErpRingMultipleRpl NOTIFICATION-TYPE
|
||||
OBJECTS {
|
||||
alaErpRingId
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The trap shall be raised on RPL if there are multiple RPLs detected in the
|
||||
ring. When the RPL node receives the NR (RB) message, this trap is raised."
|
||||
::= { alcatelIND1ErpMIBNotifications 2}
|
||||
|
||||
alaErpRingRemoved NOTIFICATION-TYPE
|
||||
OBJECTS {
|
||||
alaErpRingId
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The trap shall be raised whenever the ring is removed dynamically in
|
||||
Unlike NI Scenario only."
|
||||
::= { alcatelIND1ErpMIBNotifications 3 }
|
||||
|
||||
|
||||
-- ******************************************************************
|
||||
-- CONFORMANCE
|
||||
-- ******************************************************************
|
||||
|
||||
alcatelIND1ERPMIBCompliances OBJECT IDENTIFIER ::= { alcatelIND1ERPMIBConformance 1 }
|
||||
alcatelIND1ERPMIBGroups OBJECT IDENTIFIER ::= { alcatelIND1ERPMIBConformance 2 }
|
||||
|
||||
-- ******************************************************************
|
||||
|
||||
-- ******************************************************************
|
||||
-- COMPLIANCE
|
||||
-- ******************************************************************
|
||||
alcatelIND1ERPMIBCompliance MODULE-COMPLIANCE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Compliance statement for ERP."
|
||||
MODULE
|
||||
MANDATORY-GROUPS
|
||||
{
|
||||
alaErpGlobalGroup,
|
||||
alaErpRingAttributesGroup,
|
||||
alaErpNotificationGroup
|
||||
}
|
||||
::= { alcatelIND1ERPMIBCompliances 1 }
|
||||
|
||||
-- ******************************************************************
|
||||
-- MIB Grouping
|
||||
-- ******************************************************************
|
||||
|
||||
alaErpGlobalGroup OBJECT-GROUP
|
||||
OBJECTS
|
||||
{
|
||||
alaErpClearStats
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Objects for the Global Group."
|
||||
::={alcatelIND1ERPMIBGroups 1 }
|
||||
|
||||
alaErpRingAttributesGroup OBJECT-GROUP
|
||||
OBJECTS
|
||||
{
|
||||
alaErpRingId,
|
||||
alaErpRingServiceVid,
|
||||
alaErpRingMEGLevel,
|
||||
alaErpRingPort1,
|
||||
alaErpRingPort2,
|
||||
alaErpRingStatus,
|
||||
alaErpRingState,
|
||||
alaErpRingWaitToRestoreTimer,
|
||||
alaErpRingGuardTimer,
|
||||
alaErpRingClearStats,
|
||||
alaErpRingLastStateChange,
|
||||
alaErpRingTimeToRevert,
|
||||
alaErpRingRowStatus,
|
||||
alaErpRingVirtualChannel,
|
||||
alaErpRingRevertive,
|
||||
alaErpRingClearAction,
|
||||
alaErpRingPortStatus,
|
||||
alaErpRingPortType,
|
||||
alaErpRingPortEthOAMEvent,
|
||||
alaErpRingPortClearStats,
|
||||
alaErpRingPortRmepId,
|
||||
alaErpRingVlanRowStatus,
|
||||
alaErpStatsSignalFailPduTx,
|
||||
alaErpStatsSignalFailPduRx,
|
||||
alaErpStatsSignalFailPduDrop,
|
||||
alaErpStatsNoRequestPduTx,
|
||||
alaErpStatsNoRequestPduRx,
|
||||
alaErpStatsNoRequestPduDrop,
|
||||
alaErpStatsRPLBlockPDUTx,
|
||||
alaErpStatsRPLBlockPDURx,
|
||||
alaErpStatsRPLBlockPDUDrop,
|
||||
alaErpStatsPDUErr,
|
||||
alaErpRingPortVirtualSfMonitor,
|
||||
alaErpRingActiveVersion,
|
||||
alaErpRingResetVersionFallback
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Objects for the Ring Group."
|
||||
::={alcatelIND1ERPMIBGroups 2 }
|
||||
|
||||
alaErpNotificationGroup NOTIFICATION-GROUP
|
||||
NOTIFICATIONS
|
||||
{
|
||||
alaErpRingStateChanged,
|
||||
alaErpRingMultipleRpl,
|
||||
alaErpRingRemoved
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Collection of notifications for ERP."
|
||||
::= { alcatelIND1ERPMIBGroups 3 }
|
||||
END
|
||||
|
Reference in New Issue
Block a user