Initial commit
This commit is contained in:
David Leutgeb
942
MIBS/nokia/aos7/ALCATEL-IND1-PIM-MIB
Normal file
942
MIBS/nokia/aos7/ALCATEL-IND1-PIM-MIB
Normal file
@ -0,0 +1,942 @@
|
||||
ALCATEL-IND1-PIM-MIB DEFINITIONS ::= BEGIN
|
||||
|
||||
IMPORTS
|
||||
MODULE-IDENTITY, OBJECT-TYPE,
|
||||
NOTIFICATION-TYPE,
|
||||
IpAddress, Integer32, TimeTicks,
|
||||
Unsigned32, Counter32
|
||||
FROM SNMPv2-SMI
|
||||
InetAddressType, InetAddress,
|
||||
InetAddressPrefixLength
|
||||
FROM INET-ADDRESS-MIB
|
||||
pimInterfaceEntry
|
||||
FROM PIM-STD-MIB
|
||||
RowStatus, TruthValue
|
||||
FROM SNMPv2-TC
|
||||
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
||||
FROM SNMPv2-CONF
|
||||
routingIND1Pim
|
||||
FROM ALCATEL-IND1-BASE;
|
||||
|
||||
alcatelIND1PIMMIB MODULE-IDENTITY
|
||||
|
||||
LAST-UPDATED "201505280000Z"
|
||||
ORGANIZATION "Alcatel-Lucent"
|
||||
CONTACT-INFO
|
||||
"Please consult with Customer Service to ensure the most appropriate
|
||||
version of this document is used with the products in question:
|
||||
|
||||
Alcatel-Lucent, Enterprise Solutions Division
|
||||
(Formerly Alcatel Internetworking, Incorporated)
|
||||
26801 West Agoura Road
|
||||
Agoura Hills, CA 91301-5122
|
||||
United States Of America
|
||||
|
||||
Telephone: North America +1 800 995 2696
|
||||
Latin America +1 877 919 9526
|
||||
Europe +31 23 556 0100
|
||||
Asia +65 394 7933
|
||||
All Other +1 818 878 4507
|
||||
|
||||
Electronic Mail: support@ind.alcatel.com
|
||||
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
|
||||
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
|
||||
|
||||
DESCRIPTION
|
||||
"This module describes an authoritative enterprise-specific Simple
|
||||
Network Management Protocol (SNMP) Management Information Base (MIB):
|
||||
|
||||
This proprietary MIB contains management information for
|
||||
the configuration of PIM-SM and PIM-DM global configuration
|
||||
parameters.
|
||||
|
||||
The right to make changes in specification and other information
|
||||
contained in this document without prior notice is reserved.
|
||||
|
||||
No liability shall be assumed for any incidental, indirect, special, or
|
||||
consequential damages whatsoever arising from or related to this
|
||||
document or the information contained herein.
|
||||
|
||||
Vendors, end-users, and other interested parties are granted
|
||||
non-exclusive license to use this specification in connection with
|
||||
management of the products for which it is intended to be used.
|
||||
|
||||
Copyright (C) 1995-2007 Alcatel-Lucent
|
||||
Copyright (C) 2015 ALE USA, Inc.
|
||||
ALL RIGHTS RESERVED WORLDWIDE"
|
||||
|
||||
REVISION "200704030000Z"
|
||||
DESCRIPTION
|
||||
"The latest version of this MIB Module."
|
||||
REVISION "201505280000Z"
|
||||
DESCRIPTION
|
||||
"Added V4/V6 bidir ssm compatibility, bidir fast-join, asm fast-join and ssm-fast-join."
|
||||
|
||||
::= { routingIND1Pim 1 }
|
||||
|
||||
alcatelIND1PIMMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1PIMMIB 1 }
|
||||
|
||||
alaPimsmGlobalConfig OBJECT IDENTIFIER ::= { alcatelIND1PIMMIBObjects 1 }
|
||||
alaPimdmGlobalConfig OBJECT IDENTIFIER ::= { alcatelIND1PIMMIBObjects 2 }
|
||||
alaPimGlobalConfig OBJECT IDENTIFIER ::= { alcatelIND1PIMMIBObjects 3 }
|
||||
|
||||
-- ************************************************************************
|
||||
-- PIM-SM Global Configuration
|
||||
-- ************************************************************************
|
||||
|
||||
alaPimsmAdminStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables the
|
||||
PIM-SM protocol on this router."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimsmGlobalConfig 1}
|
||||
|
||||
alaPimsmMaxRPs OBJECT-TYPE
|
||||
SYNTAX Integer32 (1..100)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The maximum number of C-RPs allowed in the PIM-SM
|
||||
domain."
|
||||
DEFVAL { 32 }
|
||||
::= { alaPimsmGlobalConfig 2 }
|
||||
|
||||
alaPimsmProbeTime OBJECT-TYPE
|
||||
SYNTAX Integer32 (1..300)
|
||||
UNITS "seconds"
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"When NULL Registers are used, this is the time
|
||||
between sending a NULL Register and the Register-
|
||||
Suppression-Timer expiring unless it is restarted
|
||||
by receiving a Register-Stop."
|
||||
DEFVAL { 5 }
|
||||
::= { alaPimsmGlobalConfig 3}
|
||||
|
||||
alaPimsmOldRegisterMessageSupport OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
header(1),
|
||||
full(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Specifies the application of the checksum function on
|
||||
received Register messages in the PIM-SM domain. When
|
||||
set to full(2), the checksum for a register message
|
||||
is computed for the entire packet (i.e. includes data).
|
||||
When set to header(1), the checksum is done only on the
|
||||
first 8 bytes of the packet. This variable is provided
|
||||
for interoperability reasons and may be required for
|
||||
Compatibility with older implementations of PIM-SM v2.
|
||||
This parameter must be set the same throughout the
|
||||
PIM-SM domain."
|
||||
DEFVAL { header }
|
||||
::= { alaPimsmGlobalConfig 4 }
|
||||
|
||||
alaPimsmAdminSPTConfig OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables SPT Switchover
|
||||
upon receiving the first data packet."
|
||||
DEFVAL { enable }
|
||||
::= {alaPimsmGlobalConfig 5 }
|
||||
|
||||
alaPimsmRPThreshold OBJECT-TYPE
|
||||
SYNTAX Integer32 (0..2147483647)
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Sets the RP threshold value (in bps) to be used
|
||||
in determining when to switch to native
|
||||
forwarding at the RP. The value of 0
|
||||
disables the RP Threshold functionality."
|
||||
DEFVAL { 1 }
|
||||
::= {alaPimsmGlobalConfig 6 }
|
||||
|
||||
alaPimsmV6AdminStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables the
|
||||
PIM-SM IPv6 protocol on this router."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimsmGlobalConfig 7 }
|
||||
|
||||
alaPimsmV6SPTConfig OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables PIM IPv6 SPT Switchover
|
||||
upon receiving the first data packet."
|
||||
DEFVAL { enable }
|
||||
::= {alaPimsmGlobalConfig 8 }
|
||||
|
||||
alaPimsmV6RPSwitchover OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables whether PIM IPv6
|
||||
will attempt to switch to native forwarding at the RP
|
||||
upon receiving the first register-encapsulated packet."
|
||||
DEFVAL { enable }
|
||||
::= {alaPimsmGlobalConfig 9 }
|
||||
|
||||
alaPimsmBidirStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables the
|
||||
PIM BIDIR protocol on this router."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimsmGlobalConfig 10}
|
||||
|
||||
alaPimsmBidirPeriodicInterval OBJECT-TYPE
|
||||
SYNTAX Integer32 (0..2000)
|
||||
UNITS "seconds"
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This is the interval at which the DF for each RPA
|
||||
will periodically announce its status in a
|
||||
Winner message.
|
||||
|
||||
A value of 0 indicates that periodic messages will
|
||||
not be sent."
|
||||
DEFVAL { 60 }
|
||||
::= { alaPimsmGlobalConfig 11 }
|
||||
|
||||
alaPimsmBidirDFAbort OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables whether the DF
|
||||
election will be automatically aborted if a PIM hello
|
||||
is received from a PIM neighbor without the
|
||||
bidirectional capable option. By default, the DF
|
||||
election will still occur among those PIM routers that
|
||||
support BIDIR. By enabling this option, if a BIDIR-
|
||||
capable router receives a PIM hello from a
|
||||
non-BIDIR-capable router, the DF election is aborted."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimsmGlobalConfig 12}
|
||||
|
||||
|
||||
alaPimsmNonBidirHelloPeriod OBJECT-TYPE
|
||||
SYNTAX Unsigned32 (10..65535)
|
||||
UNITS "seconds"
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The minimum time that must elapse between
|
||||
alaPimNonBidirHello notifications originated by this router.
|
||||
The default value of 65535 represents an 'infinite' time, in
|
||||
which case, no alaPimNonBidirHello notifications are ever
|
||||
sent.
|
||||
|
||||
The non-zero minimum allowed value provides resilience
|
||||
against propagation of denial-of-service attacks from the
|
||||
control plane to the network management plane."
|
||||
DEFVAL { 65535 }
|
||||
::= { alaPimsmGlobalConfig 13 }
|
||||
|
||||
alaPimsmNonBidirHelloMsgsRcvd OBJECT-TYPE
|
||||
SYNTAX Counter32
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The number of PIM Hello messages that have been
|
||||
received by a BIDIR-capable device that do not have the
|
||||
Bidirectional Capable option.
|
||||
|
||||
This counter is incremented if BIDIR mode is enabled on
|
||||
this router and a PIM Hello message is received from a
|
||||
PIM neighbor that does not include the Bidirectional Capable
|
||||
option.
|
||||
|
||||
By default, the reception of these messages will not
|
||||
effect the BIDIR DF election. The alaPimsmBidirDFAbort
|
||||
object may be used to change the default behavior
|
||||
and have the DF election aborted whenever a BIDIR-capable
|
||||
router receives a PIM hello from a non-BIDIR-capable
|
||||
router."
|
||||
::= { alaPimsmGlobalConfig 14 }
|
||||
|
||||
alaPimsmNonBidirHelloAddressType OBJECT-TYPE
|
||||
SYNTAX InetAddressType
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The address type stored in alaPimsmNonBidirHelloOrigin.
|
||||
|
||||
If no Non Bidir Hello messages have been received, this
|
||||
object is set to unknown(0)."
|
||||
::= { alaPimsmGlobalConfig 15 }
|
||||
|
||||
alaPimsmNonBidirHelloOrigin OBJECT-TYPE
|
||||
SYNTAX InetAddress (SIZE (0|4|8|16|20))
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The source address of the last Non Bidir Hello message
|
||||
received by this device."
|
||||
::= { alaPimsmGlobalConfig 16 }
|
||||
|
||||
alaPimsmV6BidirStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables the
|
||||
PIM IPv6 BIDIR protocol on this router."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimsmGlobalConfig 17}
|
||||
|
||||
alaPimsmRPHashStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables applying the PIM hash function
|
||||
defined in RFC 4601 when selecting an RP from two or more equal
|
||||
group-range-to-RP mappings."
|
||||
REFERENCE "RFC 4601 section 4.7.2"
|
||||
DEFVAL { disable }
|
||||
::= {alaPimsmGlobalConfig 18 }
|
||||
|
||||
alaPimsmBidirSsmCompat OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables whether PIM
|
||||
BIDIR will support receiving IGMPv3 source-specific
|
||||
joins and treat them as a (*,G) join.
|
||||
By default, IGMPv3 source-specific joins are ignored
|
||||
when PIM is operating in BIDIR mode."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimsmGlobalConfig 19}
|
||||
|
||||
alaPimsmV6BidirSsmCompat OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables whether IPv6 PIM
|
||||
BIDIR will support receiving MLDv2 source-specific
|
||||
joins and treat them as a (*,G) join.
|
||||
By default, MLDv2 source-specific joins are ignored
|
||||
when PIM is operating in BIDIR mode."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimsmGlobalConfig 20}
|
||||
|
||||
alaPimsmBidirFastJoin OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables whether PIM
|
||||
BIDIR will automatically create the routes in hardware
|
||||
as soon as the BIDIR (*,G) routes are learned.
|
||||
By default, this is disabled and the routes are not
|
||||
installed in hardware until the multicast traffic
|
||||
reaches the switch."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimsmGlobalConfig 21}
|
||||
|
||||
alaPimsmV6BidirFastJoin OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables whether IPv6 PIM
|
||||
BIDIR will automatically create the routes in hardware
|
||||
as soon as the BIDIR (*,G) routes are learned.
|
||||
By default, this is disabled and the routes are not
|
||||
installed in hardware until the multicast traffic
|
||||
reaches the switch."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimsmGlobalConfig 22}
|
||||
|
||||
alaPimsmAsmFastJoin OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables whether PIM
|
||||
ASM will automatically create the (*,G) routes in
|
||||
hardware as soon as the ASM (*,G) routes are learned.
|
||||
By default, this is disabled and the routes are not
|
||||
installed in hardware until the multicast traffic
|
||||
reaches the switch."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimsmGlobalConfig 23}
|
||||
|
||||
alaPimsmV6AsmFastJoin OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables whether IPv6 PIM
|
||||
ASM will automatically create the (*,G) routes in
|
||||
hardware as soon as the ASM (*,G) routes are learned.
|
||||
By default, this is disabled and the routes are not
|
||||
installed in hardware until the multicast traffic
|
||||
reaches the switch."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimsmGlobalConfig 24}
|
||||
|
||||
alaPimsmSsmFastJoin OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables whether PIM
|
||||
will automatically create the (S,G) routes in
|
||||
hardware as soon as the (S,G) routes are learned.
|
||||
This includes PIM Sparse Mode (S,G) routes as well
|
||||
as PIM SSM (S,G) routes.
|
||||
By default, this is disabled and the routes are not
|
||||
installed in hardware until the multicast traffic
|
||||
reaches the switch."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimsmGlobalConfig 25}
|
||||
|
||||
alaPimsmV6SsmFastJoin OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables whether IPv6 PIM
|
||||
will automatically create the (S,G) routes in hardware
|
||||
as soon as the (S,G) routes are learned.
|
||||
This includes PIM Sparse Mode (S,G) routes as well
|
||||
as PIM SSM (S,G) routes.
|
||||
By default, this is disabled and the routes are not
|
||||
installed in hardware until the multicast traffic
|
||||
reaches the switch."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimsmGlobalConfig 26}
|
||||
|
||||
|
||||
-- ************************************************************************
|
||||
-- PIM-DM Global Configuration
|
||||
-- ************************************************************************
|
||||
|
||||
alaPimdmAdminStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables the
|
||||
PIM-DM protocol on this router."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimdmGlobalConfig 1}
|
||||
|
||||
alaPimdmStateRefreshTimeToLive OBJECT-TYPE
|
||||
SYNTAX Integer32
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "The TTL to be used by this router's originated State
|
||||
Refresh messages if the data packet's TTL is not
|
||||
recorded."
|
||||
DEFVAL { 16 }
|
||||
::= {alaPimdmGlobalConfig 2}
|
||||
|
||||
alaPimdmStateRefreshLimitInterval OBJECT-TYPE
|
||||
SYNTAX TimeTicks
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION "This router will not forward successive State Refresh
|
||||
messages received at less than this interval."
|
||||
DEFVAL { 0 }
|
||||
::= {alaPimdmGlobalConfig 3}
|
||||
|
||||
alaPimdmV6AdminStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables the
|
||||
PIM-DM IPv6 protocol on this router."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimdmGlobalConfig 4}
|
||||
|
||||
--
|
||||
-- The PIM Dense Group Table
|
||||
-- This table allows the configuration of pim group mappings to be
|
||||
-- used with dense mode. These mappings correspond to the sparse
|
||||
-- mappings defined in the pimStaticRPTable defined in the PIM-STD-MIB.
|
||||
--
|
||||
|
||||
alaPimdmDenseGroupTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF AlaPimdmDenseGroupEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"This table is used to manage configuration of dense groups.
|
||||
|
||||
If the group prefixes configured for two or more rows in
|
||||
this table overlap, the row with the greatest value of
|
||||
alaPimdmDenseGroupGrpPrefixLength is used for the overlapping
|
||||
range."
|
||||
::= { alaPimdmGlobalConfig 5 }
|
||||
|
||||
alaPimdmDenseGroupEntry OBJECT-TYPE
|
||||
SYNTAX AlaPimdmDenseGroupEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An entry (conceptual row) in the alaPimdmDenseGroupTable. This
|
||||
entry is preserved on agent restart."
|
||||
INDEX { alaPimdmDenseGroupAddressType,
|
||||
alaPimdmDenseGroupGrpAddress,
|
||||
alaPimdmDenseGroupGrpPrefixLength }
|
||||
::= { alaPimdmDenseGroupTable 1 }
|
||||
|
||||
AlaPimdmDenseGroupEntry ::= SEQUENCE {
|
||||
alaPimdmDenseGroupAddressType InetAddressType,
|
||||
alaPimdmDenseGroupGrpAddress InetAddress,
|
||||
alaPimdmDenseGroupGrpPrefixLength InetAddressPrefixLength,
|
||||
alaPimdmDenseGroupOverrideDynamic TruthValue,
|
||||
alaPimdmDenseGroupPrecedence Unsigned32,
|
||||
alaPimdmDenseGroupRowStatus RowStatus
|
||||
}
|
||||
|
||||
alaPimdmDenseGroupAddressType OBJECT-TYPE
|
||||
SYNTAX InetAddressType
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The address type of this entry."
|
||||
::= { alaPimdmDenseGroupEntry 1 }
|
||||
|
||||
alaPimdmDenseGroupGrpAddress OBJECT-TYPE
|
||||
SYNTAX InetAddress (SIZE (4|8|16|20))
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The multicast group address that, when combined with
|
||||
alaPimdmDenseGroupGrpPrefixLength, gives the group prefix for this
|
||||
entry. The InetAddressType is given by the
|
||||
alaPimdmDenseGroupAddressType object.
|
||||
|
||||
This address object is only significant up to
|
||||
alaPimdmDenseGroupGrpPrefixLength bits. The remainder of the
|
||||
address bits are zero. This is especially important for
|
||||
this index field, which is part of the index of this entry.
|
||||
Any non-zero bits would signify an entirely different
|
||||
entry."
|
||||
::= { alaPimdmDenseGroupEntry 2 }
|
||||
|
||||
alaPimdmDenseGroupGrpPrefixLength OBJECT-TYPE
|
||||
SYNTAX InetAddressPrefixLength (4..128)
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The multicast group prefix length that, when combined
|
||||
with alaPimdmDenseGroupGrpAddress, gives the group prefix for this
|
||||
entry. The InetAddressType is given by the
|
||||
alaPimdmDenseGroupAddressType object. If alaPimdmDenseGroupAddressType is
|
||||
'ipv4' or 'ipv4z', this object must be in the range 4..32.
|
||||
If alaPimdmDenseGroupGrpAddressType is 'ipv6' or 'ipv6z', this
|
||||
object must be in the range 8..128."
|
||||
::= { alaPimdmDenseGroupEntry 3 }
|
||||
|
||||
alaPimdmDenseGroupOverrideDynamic OBJECT-TYPE
|
||||
SYNTAX TruthValue
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Whether this dense group configuration will override other
|
||||
group mappings in this group prefix. If this object is
|
||||
TRUE, then it will override:
|
||||
|
||||
- RP information learned dynamically for groups in this
|
||||
group prefix.
|
||||
|
||||
- RP information configured in alaPimdmDenseGroupTable with
|
||||
alaPimdmDenseGroupOverrideDynamic set to FALSE.
|
||||
|
||||
See pimGroupMappingTable for details."
|
||||
DEFVAL { false }
|
||||
::= { alaPimdmDenseGroupEntry 4 }
|
||||
|
||||
alaPimdmDenseGroupPrecedence OBJECT-TYPE
|
||||
SYNTAX Unsigned32 (0..65535)
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The value for pimGroupMappingPrecedence to be used for this
|
||||
static RP configuration. This allows fine control over
|
||||
which configuration is overridden by this static
|
||||
configuration.
|
||||
|
||||
If alaPimdmDenseGroupOverrideDynamic is set to TRUE, all dynamic RP
|
||||
configuration is overridden by this static configuration,
|
||||
whatever the value of this object.
|
||||
|
||||
The absolute values of this object have a significance only
|
||||
on the local router and do not need to be coordinated with
|
||||
other routers. A setting of this object may have different
|
||||
effects when applied to other routers.
|
||||
|
||||
Do not use this object unless fine control of static RP
|
||||
behavior on the local router is required."
|
||||
::= { alaPimdmDenseGroupEntry 5 }
|
||||
|
||||
alaPimdmDenseGroupRowStatus OBJECT-TYPE
|
||||
SYNTAX RowStatus
|
||||
MAX-ACCESS read-create
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The status of this row, by which rows in this table can
|
||||
be created and destroyed.
|
||||
|
||||
All writeable objects in this entry can be modified when the
|
||||
status of this entry is active(1)."
|
||||
::= { alaPimdmDenseGroupEntry 6 }
|
||||
|
||||
|
||||
-- ************************************************************************
|
||||
-- PIM Global Configuration
|
||||
-- ************************************************************************
|
||||
|
||||
alaPimBfdStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables PIM
|
||||
with the BFD protocol on this router."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimGlobalConfig 1}
|
||||
|
||||
alaPimBfdAllInterfaceStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables BFD
|
||||
for all PIM interfaces on this router."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimGlobalConfig 2}
|
||||
|
||||
alaPimMoFRRStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables MoFRR
|
||||
(Multicast only Fast Re-Route) on this router."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimGlobalConfig 3}
|
||||
|
||||
alaPimMoFRRAllRouteStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"By default, MoFRR is only applied to multicast
|
||||
routes that have local clients. Enabling
|
||||
alaPimMoFRRAllRouteStatus will enable MoFRR
|
||||
on all routes whether there are local clients
|
||||
or not. alaPimMoFRRStatus must be enabled for
|
||||
this to take effect."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimGlobalConfig 4}
|
||||
|
||||
-- ************************************************************************
|
||||
-- Expansion of pimInterfaceEntry
|
||||
-- ************************************************************************
|
||||
|
||||
alaPimInterfaceAugTable OBJECT-TYPE
|
||||
SYNTAX SEQUENCE OF AlaPimInterfaceAugEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Expansion for pimInterfaceTable"
|
||||
::= { alaPimGlobalConfig 5 }
|
||||
|
||||
alaPimInterfaceAugEntry OBJECT-TYPE
|
||||
SYNTAX AlaPimInterfaceAugEntry
|
||||
MAX-ACCESS not-accessible
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An entry of alaPimInterfaceAugTable"
|
||||
AUGMENTS { pimInterfaceEntry }
|
||||
::= { alaPimInterfaceAugTable 1 }
|
||||
|
||||
AlaPimInterfaceAugEntry ::= SEQUENCE {
|
||||
alaPimInterfaceBfdStatus INTEGER
|
||||
}
|
||||
|
||||
alaPimInterfaceBfdStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Enables/Disables BFD for particular interfaces of PIM."
|
||||
DEFVAL { disable }
|
||||
::= { alaPimInterfaceAugEntry 1 }
|
||||
|
||||
alaPimMbrAllSourcesStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables PIM to notify DVMRP about
|
||||
the routes to all multicast sources learned instead of just
|
||||
the directly connected subnets so that these routes can be
|
||||
advertised in the DVMRP domain via standard DVMRP mechanisms.
|
||||
This object is only applicable if the router is operating as
|
||||
a Multicast Border Router."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimGlobalConfig 6}
|
||||
|
||||
alaPimMbrOperStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-only
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Whether MBR is currently enabled/disabled for PIM."
|
||||
::= {alaPimGlobalConfig 7}
|
||||
|
||||
alaPimV6BfdStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables PIM IPv6
|
||||
with the BFD protocol on this router."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimGlobalConfig 8}
|
||||
|
||||
alaPimV6BfdAllInterfaceStatus OBJECT-TYPE
|
||||
SYNTAX INTEGER {
|
||||
enable(1),
|
||||
disable(2)
|
||||
}
|
||||
MAX-ACCESS read-write
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"Administratively enables/disables BFD
|
||||
for all PIM IPv6 interfaces on this router."
|
||||
DEFVAL { disable }
|
||||
::= {alaPimGlobalConfig 9}
|
||||
|
||||
-- ************************************************************************
|
||||
-- PIM Notifications
|
||||
-- ************************************************************************
|
||||
|
||||
alaPimNotifications OBJECT IDENTIFIER ::= { alcatelIND1PIMMIB 0 }
|
||||
|
||||
alaPimNonBidirHello NOTIFICATION-TYPE
|
||||
OBJECTS { alaPimsmNonBidirHelloAddressType,
|
||||
alaPimsmNonBidirHelloOrigin }
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"An alaPimNonBidirHello notification signifies that
|
||||
a bidir-capable router has received a PIM hello from
|
||||
a non-bidir-capable router.
|
||||
|
||||
This notification is generated whenever the counter
|
||||
alaPimsmNonBidirHelloMsgsRcvd is incremented, subject
|
||||
to the rate limit specified by
|
||||
alaPimsmNonBidirHelloNotificationPeriod."
|
||||
::= { alaPimNotifications 1 }
|
||||
|
||||
-- conformance information
|
||||
|
||||
alcatelIND1PIMMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1PIMMIB 2 }
|
||||
alcatelIND1PIMMIBCompliances OBJECT IDENTIFIER ::=
|
||||
{ alcatelIND1PIMMIBConformance 1 }
|
||||
alcatelIND1PIMMIBGroups OBJECT IDENTIFIER ::=
|
||||
{ alcatelIND1PIMMIBConformance 2 }
|
||||
|
||||
|
||||
-- compliance statements
|
||||
|
||||
alaPimsmCompliance MODULE-COMPLIANCE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The compliance statement for routers running PIM Sparse
|
||||
Mode and implementing the ALCATEL-IND1-PIM MIB."
|
||||
MODULE -- this module
|
||||
MANDATORY-GROUPS { alaPimsmConfigMIBGroup, alaPimConfigMIBGroup }
|
||||
|
||||
::= { alcatelIND1PIMMIBCompliances 1 }
|
||||
|
||||
alaPimdmCompliance MODULE-COMPLIANCE
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"The compliance statement for routers running PIM Dense
|
||||
Mode and implementing the ALCATEL-IND1-PIM MIB."
|
||||
MODULE -- this module
|
||||
MANDATORY-GROUPS { alaPimdmConfigMIBGroup, alaPimConfigMIBGroup }
|
||||
|
||||
::= { alcatelIND1PIMMIBCompliances 2 }
|
||||
|
||||
-- units of conformance
|
||||
|
||||
alaPimsmConfigMIBGroup OBJECT-GROUP
|
||||
OBJECTS { alaPimsmAdminStatus, alaPimsmMaxRPs,
|
||||
alaPimsmProbeTime, alaPimsmOldRegisterMessageSupport,
|
||||
alaPimsmAdminSPTConfig, alaPimsmRPThreshold,
|
||||
alaPimsmV6AdminStatus, alaPimsmV6SPTConfig,
|
||||
alaPimsmV6RPSwitchover, alaPimsmBidirStatus,
|
||||
alaPimsmBidirPeriodicInterval, alaPimsmBidirDFAbort,
|
||||
alaPimsmNonBidirHelloPeriod, alaPimsmNonBidirHelloMsgsRcvd,
|
||||
alaPimsmV6BidirStatus, alaPimsmRPHashStatus,
|
||||
alaPimsmBidirSsmCompat, alaPimsmV6BidirSsmCompat,
|
||||
alaPimsmBidirFastJoin, alaPimsmV6BidirFastJoin,
|
||||
alaPimsmAsmFastJoin, alaPimsmV6AsmFastJoin,
|
||||
alaPimsmSsmFastJoin, alaPimsmV6SsmFastJoin
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of objects to support management of global
|
||||
configuration parameters of PIM Sparse Mode routers."
|
||||
::= { alcatelIND1PIMMIBGroups 1 }
|
||||
|
||||
alaPimdmConfigMIBGroup OBJECT-GROUP
|
||||
OBJECTS { alaPimdmAdminStatus, alaPimdmStateRefreshTimeToLive,
|
||||
alaPimdmStateRefreshLimitInterval,
|
||||
alaPimdmV6AdminStatus, alaPimdmDenseGroupOverrideDynamic,
|
||||
alaPimdmDenseGroupPrecedence, alaPimdmDenseGroupRowStatus
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of objects to support management of global
|
||||
configuration parameters of PIM Dense Mode routers."
|
||||
::= { alcatelIND1PIMMIBGroups 2 }
|
||||
|
||||
alaPimConfigMIBGroup OBJECT-GROUP
|
||||
OBJECTS { alaPimBfdStatus,
|
||||
alaPimBfdAllInterfaceStatus,
|
||||
alaPimMoFRRStatus,
|
||||
alaPimMoFRRAllRouteStatus,
|
||||
alaPimInterfaceBfdStatus,
|
||||
alaPimMbrAllSourcesStatus,
|
||||
alaPimMbrOperStatus,
|
||||
alaPimV6BfdStatus,
|
||||
alaPimV6BfdAllInterfaceStatus
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
"A collection of objects to support management of global
|
||||
configuration parameters of PIM routers."
|
||||
::= { alcatelIND1PIMMIBGroups 3 }
|
||||
|
||||
alaPimOptionalGroup OBJECT-GROUP
|
||||
OBJECTS {
|
||||
alaPimsmNonBidirHelloAddressType,
|
||||
alaPimsmNonBidirHelloOrigin
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" PIM objects to stop the tools from complaining "
|
||||
::= { alcatelIND1PIMMIBGroups 4 }
|
||||
|
||||
alaPimNotificationGroup NOTIFICATION-GROUP
|
||||
NOTIFICATIONS {
|
||||
alaPimNonBidirHello
|
||||
}
|
||||
STATUS current
|
||||
DESCRIPTION
|
||||
" PIM Notification objects "
|
||||
::= { alcatelIND1PIMMIBGroups 5 }
|
||||
|
||||
END
|
||||
Reference in New Issue
Block a user