david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Initial commit

Browse Source
This commit is contained in:
David Leutgeb
2023-12-05 12:25:34 +01:00
commit 98a672123c
4378 changed files with 8817503 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3795
MIBS/omnitron/OMNITRON-MIB Normal file
View File

File diff suppressed because it is too large Load Diff

406
MIBS/omnitron/OMNITRON-POE-MIB Normal file
View File

@@ -0,0 +1,406 @@
OMNITRON-POE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, IpAddress
FROM SNMPv2-SMI -- RFC-2578
TruthValue
FROM SNMPv2-TC -- RFC-2579
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF -- RFC-2580
omnitron, OstPortSingleIndex, OstFloatValue
FROM OMNITRON-TC-MIB; -- Omnitron Enterprise Extension MIB
omnitronPoeMib MODULE-IDENTITY
LAST-UPDATED "201501191200Z" -- January 19, 2015
ORGANIZATION "Omnitron Systems Technology, Inc."
CONTACT-INFO "Omnitron Systems Technology, Inc.
38 Tesla
Irvine, CA 92618-4670
USA
Tel: (949) 250 6510
Fax: (949) 250 6514
E-mail: info@omnitron-systems.com
International: +1 949 250 6510
Technical Support and Customer Service
Tel: (800) 675 8410
E-mail: support@omnitron-systems.com
International: +1 949 250 6510"
DESCRIPTION
"Omnitron PoE MIB for use with iConverter Management Modules v5.2
and NetOutlook.
Copyright 2015 Omnitron Systems Technology, Inc.
All rights reserved.
"
REVISION "201501191200Z" -- January 19, 2015
DESCRIPTION "Initial version of v5.2 MIB.
"
::= { omnitron 15 }
--------------------------------------------------------------------------------
-- Power Over Ethernet (PoE) Global Configuration Table
--------------------------------------------------------------------------------
ostPoeGlobalCfgTable OBJECT IDENTIFIER ::= { omnitronPoeMib 1 }
ostPoeGlobalCfgPwrLimitationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the PoE PSE power limiting function is enabled.
The value 'true' indicates that PoE PSE limiting is enabled.
The value 'false' indicates that PoE PSE limiting is disabled.
"
DEFVAL { false }
::= { ostPoeGlobalCfgTable 1 }
ostPoeGlobalCfgTotalPwr OBJECT-TYPE
SYNTAX OstFloatValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the total power sourced in Watts.
"
DEFVAL { "0.0" }
::= { ostPoeGlobalCfgTable 2 }
--------------------------------------------------------------------------------
-- Power Over Ethernet (PoE) Port Configuration Table
--------------------------------------------------------------------------------
ostPoePortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF OstPoePortCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table supports the port PoE configurations."
::= { omnitronPoeMib 2 }
ostPoePortCfgEntry OBJECT-TYPE
SYNTAX OstPoePortCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a PoE port configuration table entry."
INDEX { ostPoePortCfgIndex }
::= { ostPoePortCfgTable 1 }
OstPoePortCfgEntry ::= SEQUENCE {
ostPoePortCfgIndex OstPortSingleIndex,
ostPoePortPseEnable INTEGER,
ostPoePortPse60wMode INTEGER,
ostPoePortPdMode INTEGER,
ostPoePortPseVoltageSupplied OstFloatValue,
ostPoePortPseCurrentSupplied OstFloatValue,
ostPoePortPseStatus INTEGER,
ostPoePortHeartbeatEnable INTEGER,
ostPoePortHeartbeatIpAddress IpAddress,
ostPoePortHeartbeatInterval Unsigned32,
ostPoePortHeartbeatErrorDetection Unsigned32,
ostPoePortHeartbeatErrorAction INTEGER,
ostPoePortHeartbeatNumberRestarts Unsigned32,
ostPoEPortHeartbeatStatus INTEGER,
ostPoEPortHeartbeatDeferTime Unsigned32
}
ostPoePortCfgIndex OBJECT-TYPE
SYNTAX OstPortSingleIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that is used to identify a specific PoE port number."
::= { ostPoePortCfgEntry 1 }
ostPoePortPseEnable OBJECT-TYPE
SYNTAX INTEGER {
pseDisabled (1),
pseEnabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the PoE PSE port enable.
pseDisabled(1) PSE power source is disabled
pseEnabled(2) PSE power source is enabled
"
DEFVAL { pseEnabled }
::= { ostPoePortCfgEntry 2 }
ostPoePortPse60wMode OBJECT-TYPE
SYNTAX INTEGER {
pse60wNotAvail (0),
pse60wAuto (1),
pse60wForce (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object is the PoE PSE 60W mode enable. This is the same control as
the physical DIP switch.
pse60wNotAvail PSE 60W function not available
pse60wAuto(1) PSE 60W auto mode enabled
pse60wForce(2) PSE 60W force mode enabled
"
DEFVAL { pse60wAuto }
::= { ostPoePortCfgEntry 3 }
ostPoePortPdMode OBJECT-TYPE
SYNTAX INTEGER {
pdModeNotDetected (1),
pdModeNotClassified (2),
pdModeFailure (3),
pdModeClass0 (4),
pdModeClass1 (5),
pdModeClass2 (6),
pdModeClass3 (7),
pdModeClass4 (8),
pdMode60W (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the PoE PD classification mode.
pdModeNotDetected(1) PD is not detected
pdModeNotClassified(2) PD is not classified
pdModeFailure(3) PD classification failure
pdModeClass0(4) PD is 802.3af Class 0 15W device
pdModeClass1(5) PD is 802.3af Class 1 4W device
pdModeClass2(6) PD is 802.3af Class 2 7W device
pdModeClass3(7) PD is 802.3af Class 3 15W device
pdModeClass4(8) PD is 802.3at Class 4 30W device
pdMode60W(9) PD is 60W device
"
DEFVAL { pdModeNotDetected }
::= { ostPoePortCfgEntry 4 }
ostPoePortPseVoltageSupplied OBJECT-TYPE
SYNTAX OstFloatValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the voltage output from the PSE port in volts.
"
DEFVAL { "0.0" }
::= { ostPoePortCfgEntry 5 }
ostPoePortPseCurrentSupplied OBJECT-TYPE
SYNTAX OstFloatValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current output from the PSE port in mA
(milliamps).
"
DEFVAL { "0.0" }
::= { ostPoePortCfgEntry 6 }
ostPoePortPseStatus OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
pdNormal (2),
pdOverCurrent (3),
pdBrownOut (4),
pdInsufficientPower (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the PoE PSE port status.
notApplicable(1) PD device not connected or port disabled
pdNormal(2) PD device is being powered fully
pdOverCurrent(3) PD device is consuming too much current
pdBrownOut(4) PD device is not fully powered
pdInsufficientPower(5) PD device not powered due to lack of power
A write to this object restarts the PSE function and classification.
"
DEFVAL { notApplicable }
::= { ostPoePortCfgEntry 7 }
ostPoePortHeartbeatEnable OBJECT-TYPE
SYNTAX INTEGER {
heartbeatDisabled (1),
heartbeatEnabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the PoE PSE heartbeat enable.
heartbeatDisabled(1) PSE PD heartbeat is disabled
heartbeatEnabled(2) PSE PD heartbeat is enabled
"
DEFVAL { heartbeatDisabled }
::= { ostPoePortCfgEntry 8 }
ostPoePortHeartbeatIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the PoE PD heartbeat IP address to ping.
"
DEFVAL { '00000000'H }
::= { ostPoePortCfgEntry 9 }
ostPoePortHeartbeatInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the PoE PSE PD heartbeat transmission interval in seconds.
"
DEFVAL { 1 }
::= { ostPoePortCfgEntry 10 }
ostPoePortHeartbeatErrorDetection OBJECT-TYPE
SYNTAX Unsigned32 (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the PoE PSE PD heartbeat number of consecutively lost
heartbeat pings before an errored condition is declared. The number
of consecutive error counts is cleared when a valid heartbeat
response is received.
"
DEFVAL { 3 }
::= { ostPoePortCfgEntry 11 }
ostPoePortHeartbeatErrorAction OBJECT-TYPE
SYNTAX INTEGER {
errorLostIgnored (1),
errorRestart (2),
errorShutdown (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the PoE PSE heartbeat errored condition action.
errorLostIgnored(1) PD heartbeat errored condition is ignored
errorRestart(2) PD heartbeat errored condition results
in a restart
errorShutdown(3) PD heartbeat errored condition results
in a shutdown (power removed)
"
DEFVAL { errorLostIgnored }
::= { ostPoePortCfgEntry 12 }
ostPoePortHeartbeatNumberRestarts OBJECT-TYPE
SYNTAX Unsigned32 (0..16384)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the PoE PSE PD number of restarts when an errored
hearbeat condition occurs. This object is only used when
ostPoePortHeartbeatErrorAction is configured as 'errorRestart'
A value of zero indicates restarts never stop.
"
DEFVAL { 0 }
::= { ostPoePortCfgEntry 13 }
ostPoEPortHeartbeatStatus OBJECT-TYPE
SYNTAX INTEGER {
heartbeatDisabled (1),
heartbeatAvailable (2),
heartbeatErrored (3),
heartbeatRestart (4),
heartbeatShutdown (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the PoE PSE PD heartbeat status.
heartbeatDisabled(1) PSE PD heartbeat is disabled
heartbeatAvailable(2) PSE PD heartbeats are being received
heartbeatErrored(3) PSE PD heartbeat is in an errored condition
heartbeatRestart(4) PSE PD heartbeat error has caused a PSE restart
heartbeatShutdown(5) PSE PD heartbeat error has caused a PSE shutdown
"
DEFVAL { heartbeatDisabled }
::= { ostPoePortCfgEntry 14 }
ostPoEPortHeartbeatDeferTime OBJECT-TYPE
SYNTAX Unsigned32 (1..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the PoE heartbeat PSE PD heartbeat transmission delay
interval in seconds after the port has been reenabled. The delay is
the amount of time after power has been applied before the heartbeat
function starts and hence the detection of heartbeat errors.
"
DEFVAL { 5 }
::= { ostPoePortCfgEntry 15 }
--------------------------------------------------------------------------------
-- Conformance Information
--------------------------------------------------------------------------------
ostPoeCompliances OBJECT IDENTIFIER ::= { omnitronPoeMib 3 }
ostPoeGroups OBJECT IDENTIFIER ::= { omnitronPoeMib 4 }
--------------------------------------------------------------------------------
-- Omnitron PoE MIB Units of conformance
--------------------------------------------------------------------------------
ostPoeGroup OBJECT-GROUP
OBJECTS {
ostPoeGlobalCfgPwrLimitationEnable,
ostPoeGlobalCfgTotalPwr,
ostPoePortPseEnable,
ostPoePortPse60wMode,
ostPoePortPdMode,
ostPoePortPseVoltageSupplied,
ostPoePortPseCurrentSupplied,
ostPoePortPseStatus,
ostPoePortHeartbeatEnable,
ostPoePortHeartbeatIpAddress,
ostPoePortHeartbeatInterval,
ostPoePortHeartbeatErrorDetection,
ostPoePortHeartbeatErrorAction,
ostPoePortHeartbeatNumberRestarts,
ostPoEPortHeartbeatStatus,
ostPoEPortHeartbeatDeferTime
}
STATUS current
DESCRIPTION
"Mandatory objects for the PoE functional group."
::= { ostPoeGroups 1 }
--------------------------------------------------------------------------------
-- Omnitron POE MIB Compliance statements
-------------------------------------------------------------------------------
ostPoeCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for the Omnitron PoE MIB."
MODULE
MANDATORY-GROUPS {
ostPoeGroup
}
::= { ostPoeCompliances 2 }
END

873
MIBS/omnitron/OMNITRON-TC-MIB Normal file
View File

@@ -0,0 +1,873 @@
OMNITRON-TC-MIB DEFINITIONS ::= BEGIN
-- *****************************************************************************
-- TEXTUAL-CONVENTIONs MIB for Omnitron Systems Technology Enterprise MIBs
-- *****************************************************************************
IMPORTS
MODULE-IDENTITY, Integer32, Unsigned32, Counter64, enterprises
FROM SNMPv2-SMI -- RFC-2578
TEXTUAL-CONVENTION
FROM SNMPv2-TC; -- RFC 2579
ostOmnitronTcMib MODULE-IDENTITY
LAST-UPDATED "201505131200Z" -- May 13, 2015
ORGANIZATION "Omnitron Systems Technology, Inc."
CONTACT-INFO "Omnitron Systems Technology, Inc.
38 Tesla
Irvine, CA 92618-4670
USA
Tel: (949) 250 6510
Fax: (949) 250 6514
E-mail: info@omnitron-systems.com
International: 949 250 6510
Technical Support and Customer Service
Tel: (800) 675 8410
E-mail: support@omnitron-systems.com
International: 949 250 6510"
DESCRIPTION
"Omnitron TC MIB for use with v5.2 iConverter Management Modules
and NetOutlook
Copyright 2015 Omnitron Systems Technology, Inc.
All rights reserved
"
REVISION "201505131200Z" -- May 13, 2015
DESCRIPTION "Added OstIpv6Addr, OstIpAddr
"
REVISION "201501211200Z" -- January 21, 2015
DESCRIPTION "Initial version of v5.2 MIB.
Added OstAccessibiltyType from the OMNITRON-ACL-MIB
"
::= { enterprises 7342 11 }
omnitron OBJECT IDENTIFIER ::= { enterprises 7342 }
icAgent OBJECT IDENTIFIER ::= { omnitron 1 }
-- *****************************************************************************
-- Textual Conventions (TC)
-- *****************************************************************************
-- TC definitions are placed in alphabetical order
OstAccessibiltyType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Accessibilty type enumeration.
deny(1) Access to the module is not allowed
permit(2) Access to the module is allowed
"
SYNTAX INTEGER {
deny (1),
permit (2)
}
OstClassOfService ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Class of service setting. 0=discard, 1=lowest class, 4=highest class"
SYNTAX Unsigned32 (0..4)
OstClockFreq ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-2"
STATUS current
DESCRIPTION
"Clock frequency in hundreths of MHz."
SYNTAX Unsigned32
OstCosL2cpDstAddr ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"L2CP destination address enumeration.
Index | Destination Address | Name
------+--------------------+---------
1 | 01-80-C2-00-00-00 | RSTP
2 | 01-80-C2-00-00-01 | Pause
3 | 01-80-C2-00-00-02 | LACP
4 | 01-80-C2-00-00-02 | Marker
5 | 01-80-C2-00-00-02 | Link OAM
6 | 01-80-C2-00-00-02 |
7 | 01-80-C2-00-00-03 | 802.1x
8 | 01-80-C2-00-00-04 | IEEE MAC
9 | 01-80-C2-00-00-05 |
10 | 01-80-C2-00-00-06 |
11 | 01-80-C2-00-00-07 | E-LMI
12 | 01-80-C2-00-00-08 | Pr Bridge
13 | 01-80-C2-00-00-09 |
14 | 01-80-C2-00-00-0A |
15 | 01-80-C2-00-00-0B |
16 | 01-80-C2-00-00-0C |
17 | 01-80-C2-00-00-0D | GVRP
18 | 01-80-C2-00-00-0E | LLDP
19 | 01-80-C2-00-00-0F |
20 | 01-80-C2-00-00-20 | GARP
"
SYNTAX Unsigned32 (1..20)
OstCosNameString ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"A class of service name."
SYNTAX OCTET STRING (SIZE(1..45))
OstCosNameStringOrNone ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"A class of service name or an empty string."
SYNTAX OCTET STRING (SIZE(0..45))
OstCosTrustType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"CoS trust type enumeration.
Green traffic is marked with low drop precedence and yellow
traffic is marked with high drop precedence.
cosTrust(1) Trust frame. The frames priority
determines the egress class.
cosUsePri(2) Use the priority ostCosPriority for the
frame. The frame will egress with ostCosPriority
priority and ostCosPrirority determines the
egress class.
cosUseClass(3) Use the class ostCosClass for the frame.
The frame will egress with the frames
priority and the ostCosClass egress class.
cosUsePriClass(4) Use the priority ostCosPriority and class
ostCosClass for the frame. The frames will
egress with ostCosPri and ostCosClass egress
class.
cosGreenYellow(5) Use ostCosGreenPriority and ostCosGreenClass for
green traffic. Use ostCosYellowPriority and
ostCosYellowClass for yellow traffic.
"
SYNTAX INTEGER {
cosTrust (1),
cosUsePri (2),
cosUseClass (3),
cosUsePriClass (4),
cosGreenYellow (5)
}
OstEgressSchedulingProfileIndexType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A value that uniquely identifies an Egress Scheduling Profile.
The valid values are 1 to X, where X is the maximum supported profile.
The maximum value for X for the GM4 is 4.
"
SYNTAX Unsigned32 (1..8)
OstEgressQueueIndexType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A value that uniquely identifies an Egress Queue.
The valid values are 1 to X, where X is the maximum supported profile.
The maximum value for X for the GM4 is 4.
"
SYNTAX Unsigned32 (1..8)
OstElpsProtectType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents the ELPS protection type. The value can be one
of the following:
e1plus1UniNoAps(1) 1 unidirectional without APS communication
e1plus1UniAps(2) 1 unidirectional switching with APS communication
e1plus1BiAps(3) 1 bidirectional w/APS communication
e1to1(4) 1:1 bidirectional w/APS communication
notAvailable(5) Protect Type is unknown or not available, value returned
for status read, not allowed to write
"
SYNTAX INTEGER {
e1plus1UniNoAps (1),
e1plus1UniAps (2),
e1plus1BiAps (3),
e1to1 (4),
notAvailable (5)
}
OstElpsRequestStates ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents the current request/state of either the local or
remote (partner) ELPS instance. The value can be one of the following:
noRequest(0) No Request (NR), lowest priority
doNotRevert(1) Do Not Revert (DNR)
revertRequest(2) Revert request (RR)
exercise(4) Exercise APS protocol (EXER)
waitToRestore(5) Wait to restore (WTR)
manualSwitchWorking(6) Manual swtich to working (MS-W)
manualSwitch(7) Manual switch (MS)
signalDegrade(9) Signal degrade (SD)
signalFailWorking(11) Signal fail for working (SF)
forcedSwitch(13) Forced switch (FS)
signalFailProtection(14) Signal fail for protection (SF-P)
lockoutProtection(15) Lock of protection (LO), highest priority
notAvailable(16) Status is unknown or not available, value returned
for status read, not allowed to write
"
SYNTAX INTEGER {
noRequest (0),
doNotRevert (1),
revertRequest (2),
exercise (4),
waitToRestore (5),
manualSwitchWorking (6),
manualSwitch (7),
signalDegrade (9),
signalFailWorking (11),
forcedSwitch (13),
signalFailProtection (14),
lockoutProtection (15),
notAvailable (16)
}
OstElpsSignalStates ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents the requested or bridged signal for either
the local or remote (partner) ELPS instance. The value can be one of
the following:
nullSignal(0) Null signal. This indicates the signal that
the near-end requests be carried over the
protection path
normalSignal(1) Normal traffic signal. This indicates the
signal that is bridged onto the protection
path.
notAvailable(2) Protect Type is unknown or not available, value
returned for status read, not allowed to write
"
SYNTAX INTEGER {
nullSignal (0),
normalSignal (1),
notAvailable (2)
}
OstErpsLinkState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents the current port link state. This is a
function that indicates whether the current port is linked.
The value can be one of the following:
na(0) Not Applicable, port state is unknown
up(1) Port is linked and capable of passing traffic
down(2) Port is not linked and is not capable of
passing traffic
"
SYNTAX INTEGER {
na(0),
up(1),
down(2)
}
OstErpsPortState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents the current forwarding state of the port.
The value can be one of the following:
na(0) Not Applicable, port state is unknown
forward(1) Port is in the forwarding state
blocked(2) Port is in the blocked state
"
SYNTAX INTEGER {
na(0),
forward(1),
blocked(2)
}
OstErpsPortType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents the Ring Port type. The value can be one of the
following:
rp0(1) Ring Port 0
rp1(2) Ring Port 1
"
SYNTAX INTEGER {
rp0(1),
rp1(2)
}
OstErpsRingStates ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents the current request/state of either the local or
remote (partner) ERPS instance. The value can be one of the following:
noRequest(0) No Request (NR), local, lowest priority
rapsNr(1) Ring APS (R-APS) No Request (NR), remote
rapsNrRb(2) Ring APS (R-APS) No Request (NR), RPL Blocked (RB), remote
wtbRunning(3) Wait to Block (WTB) running, local
wtbExpires(4) Wait to Block (WTB) expires, local
wtrRunning(5) Wait to Restore (WTR) running, local
wtrExpires(6) Wait to Restore (WTR) expires, local
manualSwitch(7) Manual Switch (MS), local
rapsManualSwitch(8) Ring APS (R-APS) Manual Switch (MS), remote
rapsSignalFail(9) Ring APS (R-APS) Signal Fail (SF), remote
localClearSignalFail(10) Local clear Signal Fail (SF), local
localSignalFail(11) Local Signal Fail (SF), local
rapsForcedSwitch(12) Ring APS (R-APS) Forced Switch (FS), remote
forcedSwtich(13) Forced Switch (FS), local
clear(14) Clear, local
"
REFERENCE
"[ITU-T G.8032] Table 10-1"
SYNTAX INTEGER {
noRequest (0),
rapsNr (1),
rapsNrRb (2),
wtbRunning (3),
wtbExpires (4),
wtrRunning (5),
wtrExpires (6),
manualSwitch (7),
rapsManualSwitch (8),
rapsSignalFail (9),
localClearSignalFail (10),
localSignalFail (11),
rapsForcedSwitch (12),
forcedSwtich (13),
clear (14)
}
OstErpsRingStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents the current ring status. This is state machine node
state value for the ERPS instance. The value can be one of the
following:
initializing(1) State machine initialization
idle(2) Idle State (A)
protection(3) Protection (B)
manualSwitch(4) Manual Switch (C)
forcedSwitch(5) Forced Switch (D)
pending(6) Pending (E)
"
REFERENCE
"[ITU-T G.8032] Table 10-2"
SYNTAX INTEGER {
initializing (1),
idle (2),
protection (3),
manualSwitch (4),
forcedSwitch (5),
pending (6)
}
OstErrorString ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"The SNMP error string for further definition of a SNMP error."
SYNTAX OCTET STRING (SIZE(0..255))
OstEvcNameString ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"An EVC name."
SYNTAX OCTET STRING (SIZE(1..45))
OstEvcNameStringOrNone ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"An EVC name or an empty string."
SYNTAX OCTET STRING (SIZE(0..45))
OstFileNameString ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"A internal file name."
SYNTAX OCTET STRING (SIZE(1..45))
OstFingerprintString ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"The fingerprint value for SSH protocol."
SYNTAX OCTET STRING (SIZE(1..64))
OstFloatValue ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"Floating point data type as represented in an octet string.
Legal values and precision are indicated by the appropriate object.
Only numbers and the decimal place are legal digit values.
Example values:
1000
1500.05
1545.25
"
SYNTAX OCTET STRING (SIZE(0..20))
OstFrameCount64 ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Frame counter value."
SYNTAX Counter64
OstFrameSizeList ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"
Denotes a list of one or more frame sizes.
1. Frame sizes have a value from 64 to 10240 bytes for the GM3, GM4,
and GM4-PoE. Frame sizes have a value from 64 to 10240 bytes for
the XM5.
2. Individual frame sizes are included when separated by a comma ','.
3. A range of frame sizes is included when separated by '..'.
4. A range of sizes ending in a colon and a value, i.e. start..end:value,
is the frame increment size for the next iteration (min value is 4)
5. Ranges must be organized min size to max size, i.e. min..max
6. Individual sizes can be mixed in any order
Example values:
64
64..1024:64
64,128,256,512,1024,1280,1518,10000
"
SYNTAX OCTET STRING (SIZE(1..255))
OstIndexIntegerNextFree ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An integer which may be used as a new index in a table.
The special value of 0 indicates that no more new entries can
be created in the relevant table.
When a MIB is used for configuration, an object with this
SYNTAX always contains a legal value (if non-zero) for an
index that is not currently used in the relevant table. The
Command Generator (Network Management Application) reads this
variable and uses the (non-zero) value read when creating a
new row with an SNMP SET. When the SET is performed, the
Command Responder (agent) MUST determine whether the value is
indeed still unused; Two Network Management Applications may
attempt to create a row (configuration entry) simultaneously
and use the same value. If it is currently unused, the SET
succeeds and the Command Responder (agent) changes the value
of this object, according to an implementation-specific
algorithm. If the value is in use, however, the SET fails.
The Network Management Application MUST then re-read this
variable to obtain a new usable value.
An OBJECT-TYPE definition using this SYNTAX MUST specify the
relevant table for which the object is providing this
functionality.
"
SYNTAX Unsigned32 (0..16)
OstIpPriorityList ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"Selects IP priority values. Valid values are from 0 to 63.
Format:
X selects a single PCP priority value
X..Y selects a range of PCP priority values, X to Y
X,Y selects PCP priority values seperated by a comma
Example values:
0
2..5
0,2..5
"
SYNTAX OCTET STRING (SIZE(0..14))
OstIpv6Addr ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2x:2x:2x:2x:2x:2x:2x:2x"
STATUS current
DESCRIPTION
"This data type is used to model the IPv6 address. This is a
binary string of up to 8 octets in network byte-order.
"
SYNTAX OCTET STRING (SIZE(16..16))
OstIpAddr ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"This data type is used to model both IPv4 and IPv6 addresses. It
is a hexadecimcal octet string with separators between number groups:
either '.' for IPv4 or ':' for IPv6. The IP type is derived based upon
the format of the string. Valid IP addreses:
'192.168.1.220'
'fe80:0000:0:0:1234:5678:abcd:efff'
"
SYNTAX OCTET STRING (SIZE(0..39))
OstMhfCreation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates if the Management Entity can create MHFs.
The valid values are:
ostMHFdefault(2) MHFs can be created on this VID on any
Bridge port through which this VID can pass.
ostMHFexplicit(3) MHFs can be created for this VID only on
Bridge ports through which this VID can
pass, and only if a MEP is created at some
lower MD Level.
"
SYNTAX INTEGER {
ostMHFdefault (1),
ostMHFexplicit (2)
}
OstMipdMethodOfCreation ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the method of how this Mip table entry was created
The valid values are:
ostExplicit(1) indicates the Mip was created explicitly
through a command.
ostImplicitMa(2) indicates the Mip was created implicitly
through the MA command.
ostImplicitMde(3) indicates the Mip was created implicitly
through the CFM default Md table.
ostExplicitImplicitMa(4) indicates the Mip was created both
implicitly and explicitly through the MA command.
"
SYNTAX INTEGER {
ostExplicit(1),
ostImplicitMa(2),
ostImplicitMde(3),
ostExplicitImplicitMa(4)
}
OstModeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The module Mode Type as AP, SP or neither.
normal(1) Not specifically AP or SP
ap(2) Access Provider
sp(3) Service Provider
"
SYNTAX INTEGER {
normal (1),
ap (2),
sp (3)
}
OstModuleSingleIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A value that uniquely identifies the chassis and slot in which the module is located.
Base 10 Format: CCSS where
CC is the chassis index, 1 to 99
SS is the slot index, 1 to 99"
SYNTAX Unsigned32 (101..9999)
OstPcpPriorityList ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"Selects PCP priority values. Valid values are from 0 to 7.
Format:
X selects a single PCP priority value
X..Y selects a range of PCP priority values, X to Y
X,Y selects PCP priority values seperated by a comma
Example values:
0
2..5
0,2..5
"
SYNTAX OCTET STRING (SIZE(0..14))
OstPortClockType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that indicates the TDM port recovery state/mode.
"
SYNTAX INTEGER {
adaptiveIdle(1),
adaptiveAcqu(2),
adaptiveTrk1(3),
adaptiveTrk2(4),
holdOver(5),
coax(6),
internal(7),
line(8)
}
OstPortList ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"Denotes a list of one or more ports, separated by comma characters, in the
form of an ASCII string, which is case insensitive.
Port Description
---- ------------------
1 Port 1
2 Port 2
3 Port 3
4 Port 4
5 Port 5
6 Port 6
7 Port 7
8 Port 8
9 Port 9
10 Port 10
11 Port 11
12 Port 12
13 Port 13
14 Port 14
15 Port 15
16 Port 16
17 Port 17
a backplane port A
b backplane port B
mgt1 management port 1
mgt2 management port 2
all includes all ports
Example: '1,2,a,mgt1'
"
SYNTAX OCTET STRING
OstPortNumber ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"This object selects the port number for the specific test
instance that is configured.
This value is dependent upon actual product accessed. The port number
for a specific port can be determined by selecting the module type
and then the port that is accessed. A value of '0' indicates that
no port is defined.
Module Type P1 P2 P3 P4 P5 BP A BP B Mgt1 Mgt2
----------------- --- --- --- --- --- ---- ---- ---- ----
3-port plug-in 1 2 3 n/a n/a 4 5 6 7
3-port standalone 1 2 3 n/a n/a n/a n/a 6 7
2-port plug-in 1 2 n/a n/a n/a 3 4 5 6
2-port standalone 1 2 n/a n/a n/a n/a n/a 5 6
4-port 1 2 3 4 n/a 5 6 n/a n/a
5-port 1 2 3 4 5 n/a n/a 6 7
For the 7 port module: Port 1 - Port 7 are ports 1 - 7 are the front
facing ports, port 8 is the dedicated management port, port 9 is Mgt1
and port 10 is Mgt2.
For the 16 port module: Port 1 - Port 16 are the customer facing
ports, port 17 is the dedicated management port, port 18 is Mgt1 and
port 19 is Mgt2.
Other values are undefined.
"
SYNTAX Unsigned32 (0..99)
OstPortSingleIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A value that uniquely identifies a module port, and the chassis and slot in
which the module is located.
Base 10 Format: CCSSPP where
CC is the chassis index, 1 to 99
SS is the slot index, 1 to 99
PP is the port index, 1 to 99"
SYNTAX Unsigned32 (10101..999999)
OstPriority ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Priority setting."
SYNTAX Unsigned32 (0..7)
OstProbeNameString ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"An EVC name."
SYNTAX OCTET STRING (SIZE(1..45))
OstProfileNameString ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"A test profile name."
SYNTAX OCTET STRING (SIZE(1..45))
OstTestResultType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that indicates the result of a test. The value can be one of
the following:
pass(1) Indicates the test has passed successfully
fail(2) Indicates the test has failed
oversubscribe(3) Indicates the test failed due to oversubscription
of a resource
"
SYNTAX INTEGER {
pass (1),
fail (2),
oversubscribe (3)
}
OstTestStatusType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that indicates the status of the current test instance. The
value can be one of the following:
testNotStarted(1) Current test instance has not started yet,
not fully configured, or waiting for loop-up
testInProcess(2) Current test instance is currently running
testStopped(3) Current test instance has been stopped after running
for a period of time
testCompleted(4) Current test instance has completed
testInitializing(5) Current test is the process of starting, used to
restart a test in process, completed, or stopped
"
SYNTAX INTEGER {
testNotStarted (1),
testInProcess (2),
testStopped (3),
testCompleted (4),
testInitializing(5)
}
OstUnsigned64 ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A non-negative 64-bit bit integer, without counter semantics, between 0
and 2^64-1 inclusive (0 to 18446744073709551615 decimal).
It can have a MAX-ACCESS of read-only or read-write.
SYNTAX is Counter64 for the encoding rules only.
"
SYNTAX Counter64
OstUserNameString ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"A string that is used to identify a specific user."
SYNTAX OCTET STRING (SIZE(1..32))
OstVlanId ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The VLAN-ID that uniquely identifies a VLAN. This
is the 12-bit VLAN-ID used in the VLAN Tag header."
SYNTAX Integer32 (0..4095)
OstVlanIdList ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"Denotes a list of one or more VLAN IDs.
VLAN IDs have a value of 0 to 4095.
Individual VLAN IDs are included when separated by a comma ','.
A range of VLAN IDs is included when separated by '..'.
An asterisk indicates untagged data.
'rest' selects remaining VLAN IDs.
'all' selects all VLAN IDs.
Example values:
100,110
100..110
100,110,200..210
100,110,200..210,500..510
"
SYNTAX OCTET STRING (SIZE(0..110))
END