RADLAN-SNMP-MIB DEFINITIONS ::= BEGIN

IMPORTS
    rnd                                         FROM RADLAN-MIB
    OBJECT-TYPE, MODULE-IDENTITY                FROM SNMPv2-SMI
    TEXTUAL-CONVENTION                          FROM SNMPv2-TC;

rlSNMP MODULE-IDENTITY
          LAST-UPDATED "0410200000Z"
          ORGANIZATION "Radlan Computer Communications Ltd."
          CONTACT-INFO
                  "radlan.com"
          DESCRIPTION
                  "Private MIB module for SNMP support in Radlan devices."
          REVISION "0410200000Z"
          DESCRIPTION
                  "Initial version of this MIB."
          ::= { rnd 98 }

rlSNMPv3 OBJECT IDENTIFIER ::= { rlSNMP 1 }

rlTargetParamsTestingLevel OBJECT-TYPE
    SYNTAX  INTEGER  {
        low(1),
        high(2)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The level of the tests done when configuring an entry in the snmpTargetParamsTable."
    ::= { rlSNMPv3 1 }

rlNotifyFilterTestingLevel OBJECT-TYPE
    SYNTAX  INTEGER  {
        low(1),
        high(2)
    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "The level of the tests done when configuring an entry in the snmpNotifyFilterTable."
    ::= { rlSNMPv3 2 }

rlSnmpEngineID OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(5..32))
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "A variable for setting the router's local engineID value.
         Setting this variable will effect the value of snmpEngineID. Setting this
         variable to the value '00 00 00 00 00'H will cause snmpEngineID to get
         an automatically created value based on the device basic MAC address.
         This method of setting the agent's engineID is recommended for stand-alone
         systems. Setting this variable to any other (valid) value will set snmpEngineID
         to this value. Setting this variable to all 'ff'H or all zeros is not
         allowed, with the exception of the value '00 00 00 00 00'H.
         The last method is recommended for stackable system, in order for the
         engineID to be unique within an administrative domain.
         Setting this value (to a value different then the default value)
         is required before configuring the usmUserTable.
         Changing the value of this variable has 2 side-effects:
         - All usmUserTable configured entries will be deleted.
         - All snmpCommunityTable entries with snmpCommunityContextEngineID value
           equal to old rlSnmpEngineID value, will be updated with the new
           rlSnmpEngineID value."
    DEFVAL      { '0000000001'H }
    ::= { rlSNMPv3 3 }

rlSNMPDomains OBJECT IDENTIFIER ::= { rlSNMP 2 }

rlSnmpUDPMridDomain  OBJECT-IDENTITY
    STATUS     current
    DESCRIPTION
            "The SNMPv2 over UDP transport domain, used when Multi-Instance Router
             is supported (more than one MIR instance exist).
             The corresponding transport address is of type RlSnmpUDPMridAddress."
    ::= { rlSNMPDomains 1 }

RlSnmpUDPMridAddress ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "1d.1d.1d.1d/2d/2d"
    STATUS       current
    DESCRIPTION
            "Represents the UDP address of NMS and the MRID through which it is
             connected in order to access the agent:
               octets   contents        encoding
                1-4     IP-address      network-byte order
                5-6     UDP-port        network-byte order
                7-8     MRID            network-byte order
            "
    SYNTAX       OCTET STRING (SIZE (8))

rlSnmpRequestMridTable OBJECT-TYPE
   SYNTAX SEQUENCE OF RlSnmpRequestMridEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
    "A table for determining the Mrid for the current SNMP request."
     ::= { rlSNMP 3 }

rlSnmpRequestMridEntry  OBJECT-TYPE
   SYNTAX RlSnmpRequestMridEntry
   MAX-ACCESS not-accessible
   STATUS current
   DESCRIPTION
       " The row definition for this table."
   INDEX { rlSnmpRequestManagedMrid }
   ::= { rlSnmpRequestMridTable 1 }

RlSnmpRequestMridEntry ::= SEQUENCE {
       rlSnmpRequestManagedMrid  INTEGER,
       rlSnmpRequestMridStatus   INTEGER                                  }

rlSnmpRequestManagedMrid OBJECT-TYPE
   SYNTAX INTEGER
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
    "The router instance the NMS wants to manage in the current SNMP request.
     The value of this object, when attaching a variable instance of the
     rlSnmpRequestManagedMridTable to an SNMP request, will determine the
     managed Mrid for this request.
     It is important to mention that the variable insance must be attached
     as the first variable in the PDU in order to influence all variables."
     ::=  { rlSnmpRequestMridEntry 1 }

rlSnmpRequestMridStatus OBJECT-TYPE
   SYNTAX INTEGER {
    enable(1)
     }
   MAX-ACCESS read-write
   STATUS current
   DESCRIPTION
    "The status of this entry."
    ::= { rlSnmpRequestMridEntry 2 }

END