ATM-FORUM-MIB DEFINITIONS ::= BEGIN IMPORTS DisplayString FROM RFC1213-MIB enterprises, Counter, IpAddress FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; --atmForum MODULE-IDENTITY -- LAST-UPDATED "200003010000Z" -- ORGANIZATION "Juniper Networks, Inc." -- CONTACT-INFO -- " Ramana Gadagottu -- Juniper Networks, Inc. -- 385 Ravendale Drive -- Mountain View, CA 94043 -- E-mail: ramana@juniper.net" -- -- DESCRIPTION -- "The MIB modules representing Juniper Networks' -- implementation of ILMI MIBs -- supported by a single SNMP agent." -- ::= { enterprises 353 } atmForum OBJECT IDENTIFIER ::= { enterprises 353 } ------------------------------------------------------------------------ -- a subtree for defining administrative -- object identifiers atmForumAdmin OBJECT IDENTIFIER ::= { atmForum 1 } -- a subtree for defining UNI MIB object types atmForumUni OBJECT IDENTIFIER ::= { atmForum 2 } ------------------------------------------------------------------------ -- Textual Conventions -- All representations of ATM addresses in this MIB Module use -- the data type: AtmAddress ::= OCTET STRING (SIZE (0 .. 32)) -- Note this data type is used only by the deprecated object -- atmfPortAddress. Another definition (a refined one) is -- specified in the separate MIB for Address Registration. -- Representations in this MIB Module of an ATM address -- use the data type: AtmAddress2 ::= OCTET STRING (SIZE (8 | 20)) -- Representations in this MIB Module of a network-prefix -- for an ATM address use the data type: NetPrefix ::= OCTET STRING (SIZE (8 | 13)) -- in both the AtmAddress2 and NetPrefix conventions, non-NSAP-encoded E.164 -- addresses are represented as 8 octets using the format specified in -- section 5.1.3.1.4. -- In contrast, an NSAP-encoded address is 20 octets, and an -- NSAP-encoded network -- prefix is 13 octets long. ------------------------------------------------------------------------ -- Object Identifier definitions -- The following values are defined for use as possible values -- of the atmfPortTransmissionType object. atmfTransmissionTypes OBJECT IDENTIFIER ::= { atmForumAdmin 2 } -- unknown transmission type atmfUnknownType OBJECT IDENTIFIER ::= { atmfTransmissionTypes 1} -- Sonet STS-3c physical layer at 155.52 Mbps atmfSonetSTS3c OBJECT IDENTIFIER ::= { atmfTransmissionTypes 2 } -- DS3 physical layer at 44.736 Mbps atmfDs3 OBJECT IDENTIFIER ::= { atmfTransmissionTypes 3 } -- 4B/5B encoding physical layer at 100 Mbps atmf4B5B OBJECT IDENTIFIER ::= { atmfTransmissionTypes 4 } -- 8B/10B encoding physical layer at 155.52 Mbps atmf8B10B OBJECT IDENTIFIER ::= { atmfTransmissionTypes 5 } -- The following values are defined for use as possible values -- of the atmfPortMediaType object. atmfMediaTypes OBJECT IDENTIFIER ::= { atmForumAdmin 3 } -- unknown media type atmfMediaUnknownType OBJECT IDENTIFIER ::= { atmfMediaTypes 1 } -- Coaxial cable atmfMediaCoaxCable OBJECT IDENTIFIER ::= { atmfMediaTypes 2 } -- Single Mode fiber atmfMediaSingleMode OBJECT IDENTIFIER ::= { atmfMediaTypes 3 } -- Multi Mode fiber atmfMediaMultiMode OBJECT IDENTIFIER ::= { atmfMediaTypes 4 } -- Shielded Twisted Pair atmfMediaStp OBJECT IDENTIFIER ::= { atmfMediaTypes 5 } -- Unshielded Twisted Pair atmfMediaUtp OBJECT IDENTIFIER ::= { atmfMediaTypes 6 } -- The following values are defined for use as possible values -- of the atmfVpcTransmitTrafficDescriptorType, -- atmfVpcReceiveTrafficDescriptorType, -- atmfVccTransmitTrafficDescriptorType and -- atmfVccReceiveTrafficDescriptorType objects. atmfTrafficDescrTypes OBJECT IDENTIFIER ::= { atmForumAdmin 4 } -- The "None" Traffic Descriptor Type atmfNoDescriptor OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 1 } -- atmfPeakRate OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 2 } -- This type is no longer used -- -- The No CLP/No SCR Type atmfNoClpNoScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 3 } -- The use of the parameter vector for this type: -- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic -- Parameters #2, #3, #4 and #5 are unused -- -- The CLP without Tagging/No SCR Type atmfClpNoTaggingNoScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 4 } -- The use of the parameter vector for this type: -- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic -- Parameter #2 - peak cell rate in cells/second for CLP=0 traffic -- Parameters #3, #4 and #5 are unused -- -- The CLP with Tagging/No SCR Type atmfClpTaggingNoScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 5 } -- The use of the parameter vector for this type: -- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic -- Parameter #2 - peak cell rate in cells/second for -- CLP=0 traffic, excess tagged as CLP=1 -- Parameters #3, #4 and #5 are unused -- -- The SCR/No CLP Type atmfNoClpScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 6 } -- The use of the parameter vector for this type: -- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic -- Parameter #2 - sustainable cell rate in cells/second for CLP=0+1 traffic -- Parameter #3 - maximum burst size in cells -- Parameters #4 and #5 are unused -- -- The CLP without Tagging/SCR Type atmfClpNoTaggingScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 7 } -- The use of the parameter vector for this type: -- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic -- Parameter #2 - sustainable cell rate in cells/second for CLP=0 traffic -- Parameter #3 - maximum burst size in cells -- Parameters #4 and #5 are unused -- -- The CLP with Tagging/SCR Type atmfClpTaggingScr OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 8 } -- The use of the parameter vector for this type: -- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic -- Parameter #2 - sustainable cell rate in cells/second for CLP=0 -- traffic, excess tagged as CLP=1 -- Parameter #3 - maximum burst size in cells -- Parameters #4 and #5 are unused ------------------------------------------------------------------------ -- The MIB groups atmfPhysicalGroup OBJECT IDENTIFIER ::= { atmForumUni 1 } atmfAtmLayerGroup OBJECT IDENTIFIER ::= { atmForumUni 2 } atmfAtmStatsGroup OBJECT IDENTIFIER ::= { atmForumUni 3 } atmfVpcGroup OBJECT IDENTIFIER ::= { atmForumUni 4 } atmfVccGroup OBJECT IDENTIFIER ::= { atmForumUni 5 } -- New MIB Groups atmfAddressGroup OBJECT IDENTIFIER ::= { atmForumUni 6 } atmfNetPrefixGroup OBJECT IDENTIFIER ::= { atmForumUni 7 } ------------------------------------------------------------------------ -- The Physical Port Group -- This group is mandatory for all UNI devices. -- -- The Physical Port Table atmfPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmfPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of physical layer status and parameter information for the UNI's physical interface." ::= { atmfPhysicalGroup 1 } atmfPortEntry OBJECT-TYPE SYNTAX AtmfPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about the physical layer of a UNI interface." INDEX { atmfPortIndex } ::= { atmfPortTable 1 } AtmfPortEntry ::= SEQUENCE { atmfPortIndex INTEGER, atmfPortAddress AtmAddress, atmfPortTransmissionType OBJECT IDENTIFIER, atmfPortMediaType OBJECT IDENTIFIER, atmfPortOperStatus INTEGER, atmfPortSpecific OBJECT IDENTIFIER, atmfPortMyIfName DisplayString } atmfPortIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value which identifies this port. The value of 0 has the special meaning of identifying the local UNI." ::= { atmfPortEntry 1 } atmfPortAddress OBJECT-TYPE SYNTAX AtmAddress ACCESS read-only STATUS deprecated DESCRIPTION "This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification. The Address Group, defined as part of the separate Address Registration MIB should be used instead." ::= { atmfPortEntry 2 } atmfPortTransmissionType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "The transmission type of this port. For example, for a port using the Sonet STS-3c physical layer at 155.52 Mbs, this object would have the Object Identifier value: atmfSonetSTS3c." ::= { atmfPortEntry 3 } atmfPortMediaType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "The type of media being used on this port. For example, for a port using coaxial cable, this object would have the Object Identifier value: atmfMediaCoaxCable." ::= { atmfPortEntry 4 } atmfPortOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), inService(2), outOfService(3), loopBack(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The operational (i.e., actual) state of this port. The ILMI should not alarm on a physical interface for when the value of this object is outOfService(3). This capability is useful if equipment is to be disconnected, or for troubleshooting purposes. A value of loopBack(4) indicates that a local loopback is in place. " ::= { atmfPortEntry 5 } atmfPortSpecific OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "This object 'points' to additional transmission and/or media specific information relating to this port. In particular, this object's value is the name of a specific instance of the first columnar object of a MIB table with such additional information, where the specific instance is the one which corresponds to this port. For example, for a DS3 interface, this object would contain the value, as defined in RFC 1407: dsx3LineIndex.i where i would be the integer value uniquely identifying the DS3 interface corresponding to this port. If no additional transmission and/or media specific information is available, this object has the value { 0 0 }." ::= { atmfPortEntry 6 } atmfPortMyIfName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A textual name of this interface. If this systme is manageable through SNMP, and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. This interface must be uniquely names on this system to distinguish parallel links with a neighboring system. If this interface does not have a textual name, the value of this object is a zero length string." ::= { atmfPortEntry 7 } ------------------------------------------------------------------------ -- Note: Typical UME will support only one of the following two objects atmfMyIpNmAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "An IP Address to which a Network Management Station can send Network Management protocol, e.g. SNMP messages to UDP port 161, in order to access network management information concerning the operation of the ATM devide local to this UME." ::= { atmfPhysicalGroup 2 } -- atmfMyOsiNmNsapAddress OBJECT-TYPE -- SYNTAX NsapAddress -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "An NSAP Address to which a Network Management Station can send Network -- Management protocol messages in order to access network management -- information concerning the operation of the ATM devide local to this UME." -- ::= { atmfPhysicalGroup 3 } ------------------------------------------------------------------------ -- The ATM Layer Group -- This group is mandatory for all UNI devices. -- -- ATM-layer specific information for the UNI interface atmfAtmLayerTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmfAtmLayerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of ATM layer status and parameter information for the UNI's physical interface." ::= { atmfAtmLayerGroup 1 } atmfAtmLayerEntry OBJECT-TYPE SYNTAX AtmfAtmLayerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about the ATM layer of a UNI interface." INDEX { atmfAtmLayerIndex } ::= { atmfAtmLayerTable 1 } AtmfAtmLayerEntry ::= SEQUENCE { atmfAtmLayerIndex INTEGER, atmfAtmLayerMaxVPCs INTEGER, atmfAtmLayerMaxVCCs INTEGER, atmfAtmLayerConfiguredVPCs INTEGER, atmfAtmLayerConfiguredVCCs INTEGER, atmfAtmLayerMaxVpiBits INTEGER, atmfAtmLayerMaxVciBits INTEGER, atmfAtmLayerUniType INTEGER, atmfAtmLayerUniVersion INTEGER } atmfAtmLayerIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The unique value which identifies the UNI port. The value of 0 has the special meaning of identifying the local UNI." ::= { atmfAtmLayerEntry 1 } atmfAtmLayerMaxVPCs OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of switched and permanent VPCs supported on this UNI." ::= { atmfAtmLayerEntry 2 } atmfAtmLayerMaxVCCs OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of switched and permanent VCCs supported on this UNI." ::= { atmfAtmLayerEntry 3 } atmfAtmLayerConfiguredVPCs OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The number of permanent VPCs configured for use on this UNI." ::= { atmfAtmLayerEntry 4 } atmfAtmLayerConfiguredVCCs OBJECT-TYPE SYNTAX INTEGER (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "The number of permanent VCCs configured for use on this UNI." ::= { atmfAtmLayerEntry 5 } atmfAtmLayerMaxVpiBits OBJECT-TYPE SYNTAX INTEGER (0..8) ACCESS read-only STATUS mandatory DESCRIPTION "The number of active VPI bits on this interface." ::= {atmfAtmLayerEntry 6 } atmfAtmLayerMaxVciBits OBJECT-TYPE SYNTAX INTEGER (0..16) ACCESS read-only STATUS mandatory DESCRIPTION "The number of active VCI bits on this interface." ::= {atmfAtmLayerEntry 7 } atmfAtmLayerUniType OBJECT-TYPE SYNTAX INTEGER {public(1), private(2)} ACCESS read-only STATUS mandatory DESCRIPTION "The type of the ATM UNI, either public or private." ::= { atmfAtmLayerEntry 8 } atmfAtmLayerUniVersion OBJECT-TYPE SYNTAX INTEGER { version2point0(1), version3point0(2), version3point1(3) } ACCESS read-only STATUS mandatory DESCRIPTION "An indication of the latest version of the ATM Forum UNI Specification that is supported on this UNI. If this value is not present, a version of the UNI earlier than 3.1 is supported. If a value greated than version3point1 is persent, then UNI 3.1 communication should be attempt. If the peer UNE's value of this object is the same as, or later than the local UME's value, then the version corresponding to the local UME's value should be attempted. Otherwise, if the peer UME's value of this object is earlier, and supported locally, then the local UME should attempt the version corresponding to the peer UME's value. Otherwise, compatability of the two UMEs cannot be assumed." ::= { atmfAtmLayerEntry 9 } ------------------------------------------------------------------------ -- The ATM Statistics Group -- This group is optional. However, if any objects in this group -- are supported, then all objects in the group must be supported. -- -- ATM-layer statistics for the UNI interface atmfAtmStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmfAtmStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of ATM layer statistics information for the UNI's physical interface." ::= { atmfAtmStatsGroup 1 } atmfAtmStatsEntry OBJECT-TYPE SYNTAX AtmfAtmStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing statistics for the ATM layer of a UNI interface." INDEX { atmfAtmStatsIndex } ::= { atmfAtmStatsTable 1 } AtmfAtmStatsEntry ::= SEQUENCE { atmfAtmStatsIndex INTEGER, atmfAtmStatsReceivedCells Counter, atmfAtmStatsDroppedReceivedCells Counter, atmfAtmStatsTransmittedCells Counter } atmfAtmStatsIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The unique value which identifies the UNI port. The value of 0 has the special meaning of identifying the local UNI." ::= { atmfAtmStatsEntry 1 } atmfAtmStatsReceivedCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The accumulated number of ATM cells received on this UNI which were assigned and not dropped." ::= { atmfAtmStatsEntry 2 } atmfAtmStatsDroppedReceivedCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The accumulated number of ATM cells which were dropped for the reasons defined in section 4.4.4.2." ::= { atmfAtmStatsEntry 3 } atmfAtmStatsTransmittedCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The accumulated number of assigned ATM cells which were transmitted across this interface." ::= { atmfAtmStatsEntry 4 } ------------------------------------------------------------------------ -- The Virtual Path Group -- This group is mandatory for all UNI devices. -- -- Information concerning Virtual Path Connections atmfVpcTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmfVpcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of status and parameter information on the virtual path connections which cross this UNI. These is one entry in this table for each permanent virtual path connection." ::= { atmfVpcGroup 1 } atmfVpcEntry OBJECT-TYPE SYNTAX AtmfVpcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about a particular virtual path connection." INDEX { atmfVpcPortIndex, atmfVpcVpi } ::= { atmfVpcTable 1 } AtmfVpcEntry ::= SEQUENCE { atmfVpcPortIndex INTEGER, atmfVpcVpi INTEGER, atmfVpcOperStatus INTEGER, atmfVpcTransmitTrafficDescriptorType OBJECT IDENTIFIER, atmfVpcTransmitTrafficDescriptorParam1 INTEGER, atmfVpcTransmitTrafficDescriptorParam2 INTEGER, atmfVpcTransmitTrafficDescriptorParam3 INTEGER, atmfVpcTransmitTrafficDescriptorParam4 INTEGER, atmfVpcTransmitTrafficDescriptorParam5 INTEGER, atmfVpcReceiveTrafficDescriptorType OBJECT IDENTIFIER, atmfVpcReceiveTrafficDescriptorParam1 INTEGER, atmfVpcReceiveTrafficDescriptorParam2 INTEGER, atmfVpcReceiveTrafficDescriptorParam3 INTEGER, atmfVpcReceiveTrafficDescriptorParam4 INTEGER, atmfVpcReceiveTrafficDescriptorParam5 INTEGER, atmfVpcQoSCategory INTEGER, atmfVpcTransmitQoSClass INTEGER, atmfVpcReceiveQoSClass INTEGER } atmfVpcPortIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The unique value which identifies the UNI port. The value of 0 has the special meaning of identifying the local UNI." ::= { atmfVpcEntry 1 } atmfVpcVpi OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The VPI value of this Virtual Path Connection at the local UNI." ::= { atmfVpcEntry 2 } atmfVpcOperStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), end2endUp(2), end2endDown(3), localUpEnd2endUnknown(4), localDown(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The present actual operational status of the VPC. A value of end2endUp(2) or end2endDown(3) would be used if the end-to-end status is known. If only local status information is available, a value of localUpEnd2endUnknown(4) or localDown(5) would be used." ::= { atmfVpcEntry 3 } atmfVpcTransmitTrafficDescriptorType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "The type of traffic management, applicable to the transmit direction of this VPC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVpcTransmitTrafficDescriptorParam1, atmfVpcTransmitTrafficDescriptorParam2, atmfVpcTransmitTrafficDescriptorParam3, atmfVpcTransmitTrafficDescriptorParam4, and atmfVpcTransmitTrafficDescriptorParam5." ::= { atmfVpcEntry 4 } atmfVpcTransmitTrafficDescriptorParam1 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The first parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType." ::= { atmfVpcEntry 5 } atmfVpcTransmitTrafficDescriptorParam2 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The second parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType." ::= { atmfVpcEntry 6 } atmfVpcTransmitTrafficDescriptorParam3 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The third parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType." ::= { atmfVpcEntry 7 } atmfVpcTransmitTrafficDescriptorParam4 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The fourth parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType." ::= { atmfVpcEntry 8 } atmfVpcTransmitTrafficDescriptorParam5 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The fifth parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType." ::= { atmfVpcEntry 9 } atmfVpcReceiveTrafficDescriptorType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "The type of traffic management, applicable to the traffic in the receive direction of this VPC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVpcReceiveTrafficDescriptorParam1, atmfVpcReceiveTrafficDescriptorParam2, atmfVpcReceiveTrafficDescriptorParam3, atmfVpcReceiveTrafficDescriptorParam4, and atmfVpcReceiveTrafficDescriptorParam5." ::= { atmfVpcEntry 10 } atmfVpcReceiveTrafficDescriptorParam1 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The first parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType." ::= { atmfVpcEntry 11 } atmfVpcReceiveTrafficDescriptorParam2 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The second parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType." ::= { atmfVpcEntry 12 } atmfVpcReceiveTrafficDescriptorParam3 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The third parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType." ::= { atmfVpcEntry 13 } atmfVpcReceiveTrafficDescriptorParam4 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The fourth parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType." ::= { atmfVpcEntry 14 } atmfVpcReceiveTrafficDescriptorParam5 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The fifth parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType." ::= { atmfVpcEntry 15 } atmfVpcQoSCategory OBJECT-TYPE SYNTAX INTEGER { other(1), deterministic (2), statistical (3), unspecified (4) } ACCESS read-only STATUS deprecated DESCRIPTION "This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification." ::= { atmfVpcEntry 16 } atmfVpcTransmitQoSClass OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The QoS Class, as defined in section 4 of Appendix A, for the transmit direction of this VPC connection at the local UNI." ::= { atmfVpcEntry 17 } atmfVpcReceiveQoSClass OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The QoS Class, as defined in section 4 of Appendix A, for the receive direction of this VPC connection at the local UNI." ::= { atmfVpcEntry 18 } ------------------------------------------------------------------------ -- The Virtual Channel Group -- This group is mandatory for all UNI devices. -- -- Information concerning Virtual Channel Connections atmfVccTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmfVccEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of status and parameter information on the virtual channel connections which are visible at this UNI. There is one entry in this table for each permanent virtual channel connection, including reserved VCC that are supported: e.g., signalling, OAM flows, and ILMI, but not unassigned cells." ::= { atmfVccGroup 1 } atmfVccEntry OBJECT-TYPE SYNTAX AtmfVccEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table, containing information about a particular virtual channel connection." INDEX { atmfVccPortIndex, atmfVccVpi, atmfVccVci } ::= { atmfVccTable 1 } AtmfVccEntry ::= SEQUENCE { atmfVccPortIndex INTEGER, atmfVccVpi INTEGER, atmfVccVci INTEGER, atmfVccOperStatus INTEGER, atmfVccTransmitTrafficDescriptorType OBJECT IDENTIFIER, atmfVccTransmitTrafficDescriptorParam1 INTEGER, atmfVccTransmitTrafficDescriptorParam2 INTEGER, atmfVccTransmitTrafficDescriptorParam3 INTEGER, atmfVccTransmitTrafficDescriptorParam4 INTEGER, atmfVccTransmitTrafficDescriptorParam5 INTEGER, atmfVccReceiveTrafficDescriptorType OBJECT IDENTIFIER, atmfVccReceiveTrafficDescriptorParam1 INTEGER, atmfVccReceiveTrafficDescriptorParam2 INTEGER, atmfVccReceiveTrafficDescriptorParam3 INTEGER, atmfVccReceiveTrafficDescriptorParam4 INTEGER, atmfVccReceiveTrafficDescriptorParam5 INTEGER, atmfVccQoSCategory INTEGER, atmfVccTransmitQoSClass INTEGER, atmfVccReceiveQoSClass INTEGER } atmfVccPortIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The unique value which identifies the UNI port. The value of 0 has the special meaning of identifying the local UNI." ::= { atmfVccEntry 1 } atmfVccVpi OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The VPI value of this Virtual Channel Connection at the local UNI." ::= { atmfVccEntry 2 } atmfVccVci OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The VCI value of this Virtual Channel Connection at the local UNI." ::= { atmfVccEntry 3 } atmfVccOperStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), end2endUp(2), end2endDown(3), localUpEnd2endUnknown(4), localDown(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The present actual operational status of the VCC. A value of end2endUp(2) or end2endUp(3) is used if the end to end status is known. If only local status is known a value of localUpEnd2endUnknown(4) or localDown(5) is used." ::= { atmfVccEntry 4 } atmfVccTransmitTrafficDescriptorType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "The type of traffic management, applicable to the transmit direction of this VCC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVccTransmitTrafficDescriptorParam1, atmfVccTransmitTrafficDescriptorParam2, atmfVccTransmitTrafficDescriptorParam3, atmfVccTransmitTrafficDescriptorParam4, and atmfVccTransmitTrafficDescriptorParam5." ::= { atmfVccEntry 5 } atmfVccTransmitTrafficDescriptorParam1 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The first parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType." ::= { atmfVccEntry 6 } atmfVccTransmitTrafficDescriptorParam2 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The second parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType." ::= { atmfVccEntry 7 } atmfVccTransmitTrafficDescriptorParam3 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The third parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType." ::= { atmfVccEntry 8 } atmfVccTransmitTrafficDescriptorParam4 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The fourth parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType." ::= { atmfVccEntry 9 } atmfVccTransmitTrafficDescriptorParam5 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The fifth parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType." ::= { atmfVccEntry 10 } atmfVccReceiveTrafficDescriptorType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "The type of traffic management, applicable to the traffic in the receive direction of this VCC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVccReceiveTrafficDescriptorParam1, atmfVccReceiveTrafficDescriptorParam2, atmfVccReceiveTrafficDescriptorParam3, atmfVccReceiveTrafficDescriptorParam4, and atmfVccReceiveTrafficDescriptorParam5." ::= { atmfVccEntry 11 } atmfVccReceiveTrafficDescriptorParam1 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The first parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType." ::= { atmfVccEntry 12 } atmfVccReceiveTrafficDescriptorParam2 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The second parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType." ::= { atmfVccEntry 13 } atmfVccReceiveTrafficDescriptorParam3 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The third parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType." ::= { atmfVccEntry 14 } atmfVccReceiveTrafficDescriptorParam4 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The fourth parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType." ::= { atmfVccEntry 15 } atmfVccReceiveTrafficDescriptorParam5 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The fifth parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType." ::= { atmfVccEntry 16 } atmfVccQoSCategory OBJECT-TYPE SYNTAX INTEGER { other(1), deterministic (2), statistical (3), unspecified (4) } ACCESS read-only STATUS deprecated DESCRIPTION "This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification." ::= { atmfVccEntry 17 } atmfVccTransmitQoSClass OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The QoS Class, as defined in section 4 of Appendix A, for the transmit direction of this VCC connection at the local UNI." ::= { atmfVccEntry 18 } atmfVccReceiveQoSClass OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The QoS Class, as defined in section 4 of Appendix A, for the receive direction of this VCC connection at the local UNI." ::= { atmfVccEntry 19 } ------------------------------------------------------------------------ -- The Network Prefix Table -- -- The Network Prefix Table is implemented by the UNI Management -- Entity on the user-side of the UNI atmfNetPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmfNetPrefixEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table implemented by the UNI Management Entity on the user-side of an ATM UNI port, containing the network-prefix(es) for ATM-layer addresses in effect on the user-side of the UNI." ::= { atmfNetPrefixGroup 1 } atmfNetPrefixEntry OBJECT-TYPE SYNTAX AtmfNetPrefixEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a single network-prefix for ATM-layer addresses in effect on the user-side of a UNI port. Note that the index variable atmfNetPrefixPrefix is a variable-length string, and as such the rule for variable-length strings in section 4.1.6 of RFC 1212 applies." INDEX { atmfNetPrefixPort, atmfNetPrefixPrefix } ::= { atmfNetPrefixTable 1 } AtmfNetPrefixEntry ::= SEQUENCE { atmfNetPrefixPort INTEGER, atmfNetPrefixPrefix NetPrefix, atmfNetPrefixStatus INTEGER } atmfNetPrefixPort OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "A unique value which identifies the UNI port for which the network prefix for ATM addresses is in effect. The value of 0 has the special meaning of identifying the local UNI." ::= { atmfNetPrefixEntry 1 } atmfNetPrefixPrefix OBJECT-TYPE SYNTAX NetPrefix ACCESS not-accessible STATUS mandatory DESCRIPTION "The network prefix for ATM addresses which is in effect on the user-side of the ATM UNI port." ::= { atmfNetPrefixEntry 2 } atmfNetPrefixStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "An indication of the validity of the network prefix for ATM addresses on the user-side of the UNI port. To configure a new network prefix in this table, the network-side must set the appropriate instance of this object to the value valid(1). To delete an existing network prefix in this table, the network-side must set the appropriate instance of this object to the value invalid(2). If circumstances occur on the user-side which cause a prefix to become invalid, the user-side modifies the value of the appropriate instance of this object to invalid(2). Whenever the value of this object for a particular prefix becomes invalid(2), the conceptual row for that prefix may be removed from the table at anytime, either immediately or subsequently." ::= { atmfNetPrefixEntry 3 } ------------------------------------------------------------------------ -- The Address Table -- -- The Address Table is implemented by the UNI Management Entity -- on the network-side of the UNI atmfAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmfAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table implemented by the network-side of an ATM UNI port, containing the ATM-layer addresses in effect on the user-side of the UNI." ::= { atmfAddressGroup 1 } atmfAddressEntry OBJECT-TYPE SYNTAX AtmfAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a single ATM-layer address in effect on the user-side of a UNI port. Note that the index variable atmfAddressAtmAddress is a variable-length string, and as such the rule for variable-length strings in section 4.1.6 of RFC 1212 applies." INDEX { atmfAddressPort, atmfAddressAtmAddress } ::= { atmfAddressTable 1 } AtmfAddressEntry ::= SEQUENCE { atmfAddressPort INTEGER, atmfAddressAtmAddress AtmAddress2, atmfAddressStatus INTEGER } atmfAddressPort OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "A unique value which identifies the UNI port for which the ATM address is in effect. The value of 0 has the special meaning of identifying the local UNI." ::= { atmfAddressEntry 1 } atmfAddressAtmAddress OBJECT-TYPE SYNTAX AtmAddress2 ACCESS not-accessible STATUS mandatory DESCRIPTION "The ATM address which is in effect on the user-side of the ATM UNI port." ::= { atmfAddressEntry 2 } atmfAddressStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "An indication of the validity of the ATM address at the user-side of the UNI port. To configure a new address in this table, the user-side must set the appropriate instance of this object to the value valid(1). To delete an existing address in this able, the user-side must set the appropriate instance of this object to the value invalid(2). If circumstances occur on the network-side which cause an address to become invalid, the network-side modifies the value of the appropriate instance of this object to invalid(2). Whenever the value of this object for a particular address becomes invalid(2), the conceptual row for that address may be removed from the table at anytime, either immediately or subsequently." ::= { atmfAddressEntry 3 } END