HC-RMON-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32, Gauge32, Counter64 FROM SNMPv2-SMI RowStatus, TimeStamp FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF rmon, OwnerString, statistics, history, hosts, hostTopN, matrix, etherStatsIndex, etherHistoryIndex, etherHistorySampleIndex FROM RMON-MIB rmonConformance, ZeroBasedCounter32, probeConfig FROM RMON2-MIB ZeroBasedCounter64, CounterBasedGauge64 FROM HCNUM-TC; -- Remote Network Monitoring MIB hcRMON MODULE-IDENTITY LAST-UPDATED "200205080000Z" -- May 08, 2002 ORGANIZATION "Netgear Inc" CONTACT-INFO "" DESCRIPTION "The MIB module for managing remote monitoring device implementations. This MIB module augments the original RMON MIB as specified in RFC 2819 and RFC 1513 and RMON-2 MIB as specified in RFC 2021." REVISION "200205080000Z" -- May 08, 2002 DESCRIPTION "The original version of this MIB, published as RFC3273." ::= { rmonConformance 5 } -- { rmon 1 } through { rmon 20 } are defined in RMON [RFC 2819] and -- the Token Ring RMON MIB [RFC 1513] and the RMON-2 MIB [RFC 2021]. mediaIndependentStats OBJECT IDENTIFIER ::= { rmon 21 } mediaIndependentTable OBJECT-TYPE SYNTAX SEQUENCE OF MediaIndependentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Media independent statistics for promiscuous monitoring of any media. The following table defines media independent statistics that provide information for full and/or half-duplex links as well as high capacity links. For half-duplex links, or full-duplex-capable links operating in half-duplex mode, the mediaIndependentIn* objects shall be used and the mediaIndependentOut* objects shall not increment. For full-duplex links, the mediaIndependentOut* objects shall be present and shall increment. Whenever possible, the probe should count packets moving away from the closest terminating equipment as output packets. Failing that, the probe should count packets moving away from the DTE as output packets." ::= { mediaIndependentStats 1 } mediaIndependentEntry OBJECT-TYPE SYNTAX MediaIndependentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Media independent statistics for promiscuous monitoring of any media." INDEX { mediaIndependentIndex } ::= { mediaIndependentTable 1 } MediaIndependentEntry ::= SEQUENCE { mediaIndependentIndex Integer32, mediaIndependentDataSource OBJECT IDENTIFIER, mediaIndependentDropEvents Counter32, mediaIndependentDroppedFrames Counter32, mediaIndependentInPkts Counter32, mediaIndependentInOverflowPkts Counter32, mediaIndependentInHighCapacityPkts Counter64, mediaIndependentOutPkts Counter32, mediaIndependentOutOverflowPkts Counter32, mediaIndependentOutHighCapacityPkts Counter64, mediaIndependentInOctets Counter32, mediaIndependentInOverflowOctets Counter32, mediaIndependentInHighCapacityOctets Counter64, mediaIndependentOutOctets Counter32, mediaIndependentOutOverflowOctets Counter32, mediaIndependentOutHighCapacityOctets Counter64, mediaIndependentInNUCastPkts Counter32, mediaIndependentInNUCastOverflowPkts Counter32, mediaIndependentInNUCastHighCapacityPkts Counter64, mediaIndependentOutNUCastPkts Counter32, mediaIndependentOutNUCastOverflowPkts Counter32, mediaIndependentOutNUCastHighCapacityPkts Counter64, mediaIndependentInErrors Counter32, mediaIndependentOutErrors Counter32, mediaIndependentInputSpeed Gauge32, mediaIndependentOutputSpeed Gauge32, mediaIndependentDuplexMode INTEGER, mediaIndependentDuplexChanges Counter32, mediaIndependentDuplexLastChange TimeStamp, mediaIndependentOwner OwnerString, mediaIndependentStatus RowStatus } mediaIndependentIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of this object uniquely identifies this mediaIndependent entry." ::= { mediaIndependentEntry 1 } mediaIndependentDataSource OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the source of the data that this mediaIndependent entry is configured to analyze. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 1213 and RFC 2233 [16,17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate a deletion of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it delete this entry. This object may not be modified if the associated mediaIndependentStatus object is equal to active(1)." ::= { mediaIndependentEntry 2 } mediaIndependentDropEvents OBJECT-TYPE SYNTAX Counter32 UNITS "Events" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected." ::= { mediaIndependentEntry 3 } mediaIndependentDroppedFrames OBJECT-TYPE SYNTAX Counter32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames which were received by the probe and therefore not accounted for in the mediaIndependentDropEvents, but for which the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped." ::= { mediaIndependentEntry 4 } mediaIndependentInPkts OBJECT-TYPE SYNTAX Counter32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets, broadcast packets, and multicast packets) received on a half-duplex link or on the inbound connection of a full-duplex link." ::= { mediaIndependentEntry 5 } mediaIndependentInOverflowPkts OBJECT-TYPE SYNTAX Counter32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated mediaIndependentInPkts counter has overflowed." ::= { mediaIndependentEntry 6 } mediaIndependentInHighCapacityPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets, broadcast packets, and multicast packets) received on a half-duplex link or on the inbound connection of a full-duplex link." ::= { mediaIndependentEntry 7 } mediaIndependentOutPkts OBJECT-TYPE SYNTAX Counter32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets, broadcast packets, and multicast packets) received on a full-duplex link in the direction of the network." ::= { mediaIndependentEntry 8 } mediaIndependentOutOverflowPkts OBJECT-TYPE SYNTAX Counter32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated mediaIndependentOutPkts counter has overflowed." ::= { mediaIndependentEntry 9 } mediaIndependentOutHighCapacityPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets, broadcast packets, and multicast packets) received on a full-duplex link in the direction of the network." ::= { mediaIndependentEntry 10 } mediaIndependentInOctets OBJECT-TYPE SYNTAX Counter32 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets of data (including those in bad packets) received (excluding framing bits but including FCS octets) on a half-duplex link or on the inbound connection of a full-duplex link." ::= { mediaIndependentEntry 11 } mediaIndependentInOverflowOctets OBJECT-TYPE SYNTAX Counter32 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated mediaIndependentInOctets counter has overflowed." ::= { mediaIndependentEntry 12 } mediaIndependentInHighCapacityOctets OBJECT-TYPE SYNTAX Counter64 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets of data (including those in bad packets) received (excluding framing bits but including FCS octets) on a half-duplex link or on the inbound connection of a full-duplex link." ::= { mediaIndependentEntry 13 } mediaIndependentOutOctets OBJECT-TYPE SYNTAX Counter32 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets of data (including those in bad packets) received on a full-duplex link in the direction of the network (excluding framing bits but including FCS octets)." ::= { mediaIndependentEntry 14 } mediaIndependentOutOverflowOctets OBJECT-TYPE SYNTAX Counter32 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated mediaIndependentOutOctets counter has overflowed." ::= { mediaIndependentEntry 15 } mediaIndependentOutHighCapacityOctets OBJECT-TYPE SYNTAX Counter64 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets of data (including those in bad packets) received on a full-duplex link in the direction of the network (excluding framing bits but including FCS octets)." ::= { mediaIndependentEntry 16 } mediaIndependentInNUCastPkts OBJECT-TYPE SYNTAX Counter32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of non-unicast packets (including bad packets) received on a half-duplex link or on the inbound connection of a full-duplex link." ::= { mediaIndependentEntry 17 } mediaIndependentInNUCastOverflowPkts OBJECT-TYPE SYNTAX Counter32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated mediaIndependentInNUCastPkts counter has overflowed." ::= { mediaIndependentEntry 18 } mediaIndependentInNUCastHighCapacityPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of non-unicast packets (including bad packets) received on a half-duplex link or on the inbound connection of a full-duplex link." ::= { mediaIndependentEntry 19 } mediaIndependentOutNUCastPkts OBJECT-TYPE SYNTAX Counter32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of non-unicast packets (including bad packets) received on a full-duplex link in the direction of the network." ::= { mediaIndependentEntry 20 } mediaIndependentOutNUCastOverflowPkts OBJECT-TYPE SYNTAX Counter32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated mediaIndependentOutNUCastPkts counter has overflowed." ::= { mediaIndependentEntry 21 } mediaIndependentOutNUCastHighCapacityPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received on a full-duplex link in the direction of the network." ::= { mediaIndependentEntry 22 } mediaIndependentInErrors OBJECT-TYPE SYNTAX Counter32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bad packets received on a half-duplex link or on the inbound connection of a full-duplex link." ::= { mediaIndependentEntry 23 } mediaIndependentOutErrors OBJECT-TYPE SYNTAX Counter32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bad packets received on a full-duplex link in the direction of the network." ::= { mediaIndependentEntry 24 } mediaIndependentInputSpeed OBJECT-TYPE SYNTAX Gauge32 UNITS "Kilobits per Second" MAX-ACCESS read-only STATUS current DESCRIPTION "The nominal maximum speed in kilobits per second of this half-duplex link or on the inbound connection of this full-duplex link. If the speed is unknown or there is no fixed maximum (e.g. a compressed link), this value shall be zero." ::= { mediaIndependentEntry 25 } mediaIndependentOutputSpeed OBJECT-TYPE SYNTAX Gauge32 UNITS "Kilobits per Second" MAX-ACCESS read-only STATUS current DESCRIPTION "The nominal maximum speed in kilobits per second of this full-duplex link in the direction of the network. If the speed is unknown, the link is half-duplex, or there is no fixed maximum (e.g. a compressed link), this value shall be zero." ::= { mediaIndependentEntry 26 } mediaIndependentDuplexMode OBJECT-TYPE SYNTAX INTEGER { halfduplex(1), fullduplex(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current mode of this link. Note that if the link has full-duplex capabilities but is operating in half-duplex mode, this value will be halfduplex(1)." ::= { mediaIndependentEntry 27 } mediaIndependentDuplexChanges OBJECT-TYPE SYNTAX Counter32 UNITS "Events" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this link has changed from full-duplex mode to half-duplex mode or from half-duplex mode to full-duplex mode." ::= { mediaIndependentEntry 28 } mediaIndependentDuplexLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time the duplex status of this link last changed." ::= { mediaIndependentEntry 29 } mediaIndependentOwner OBJECT-TYPE SYNTAX OwnerString MAX-ACCESS read-create STATUS current DESCRIPTION "The entity that configured this entry and is therefore using the resources assigned to it." ::= { mediaIndependentEntry 30 } mediaIndependentStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this media independent statistics entry." ::= { mediaIndependentEntry 31 } -- High Capacity extensions for the etherStatsTable etherStatsHighCapacityTable OBJECT-TYPE SYNTAX SEQUENCE OF EtherStatsHighCapacityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains the High Capacity RMON extensions to the RMON-1 etherStatsTable." ::= { statistics 7 } etherStatsHighCapacityEntry OBJECT-TYPE SYNTAX EtherStatsHighCapacityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains the High Capacity RMON extensions to the RMON-1 etherStatsEntry. These objects will be created by the agent for all etherStatsEntries it deems appropriate." INDEX { etherStatsIndex } ::= { etherStatsHighCapacityTable 1 } EtherStatsHighCapacityEntry ::= SEQUENCE { etherStatsHighCapacityOverflowPkts Counter32, etherStatsHighCapacityPkts Counter64, etherStatsHighCapacityOverflowOctets Counter32, etherStatsHighCapacityOctets Counter64, etherStatsHighCapacityOverflowPkts64Octets Counter32, etherStatsHighCapacityPkts64Octets Counter64, etherStatsHighCapacityOverflowPkts65to127Octets Counter32, etherStatsHighCapacityPkts65to127Octets Counter64, etherStatsHighCapacityOverflowPkts128to255Octets Counter32, etherStatsHighCapacityPkts128to255Octets Counter64, etherStatsHighCapacityOverflowPkts256to511Octets Counter32, etherStatsHighCapacityPkts256to511Octets Counter64, etherStatsHighCapacityOverflowPkts512to1023Octets Counter32, etherStatsHighCapacityPkts512to1023Octets Counter64, etherStatsHighCapacityOverflowPkts1024to1518Octets Counter32, etherStatsHighCapacityPkts1024to1518Octets Counter64 } etherStatsHighCapacityOverflowPkts OBJECT-TYPE SYNTAX Counter32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated etherStatsPkts counter has overflowed." ::= { etherStatsHighCapacityEntry 1 } etherStatsHighCapacityPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets, broadcast packets, and multicast packets) received." ::= { etherStatsHighCapacityEntry 2 } etherStatsHighCapacityOverflowOctets OBJECT-TYPE SYNTAX Counter32 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated etherStatsOctets counter has overflowed." ::= { etherStatsHighCapacityEntry 3 } etherStatsHighCapacityOctets OBJECT-TYPE SYNTAX Counter64 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). If the network is half-duplex Fast Ethernet, this object can be used as a reasonable estimate of utilization. If greater precision is desired, the etherStatsHighCapacityPkts and etherStatsHighCapacityOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows: Pkts * (.96 + .64) + (Octets * .08) Utilization = ------------------------------------- Interval * 10,000 The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent. This table is not appropriate for monitoring full-duplex ethernets. If the network is a full-duplex ethernet and the mediaIndependentTable is monitoring that network, the utilization can be calculated as follows: 1) Determine the utilization of the inbound path by using the appropriate equation (for ethernet or fast ethernet) to determine the utilization, substituting mediaIndependentInPkts for etherStatsHighCapacityPkts, and mediaIndependentInOctets for etherStatsHighCapacityOctets. Call the resulting utilization inUtilization. 2) Determine the utilization of the outbound path by using the same equation to determine the utilization, substituting mediaIndependentOutPkts for etherStatsHighCapacityPkts, and mediaIndependentOutOctets for etherStatsHighCapacityOctets. Call the resulting utilization outUtilization. 3) The utilization is the maximum of inUtilization and outUtilization. This metric shows the amount of percentage of bandwidth that is left before congestion will be experienced on the link." ::= { etherStatsHighCapacityEntry 4 } etherStatsHighCapacityOverflowPkts64Octets OBJECT-TYPE SYNTAX Counter32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated etherStatsPkts64Octets counter has overflowed." ::= { etherStatsHighCapacityEntry 5 } etherStatsHighCapacityPkts64Octets OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets)." ::= { etherStatsHighCapacityEntry 6 } etherStatsHighCapacityOverflowPkts65to127Octets OBJECT-TYPE SYNTAX Counter32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated etherStatsPkts65to127Octets counter has overflowed." ::= { etherStatsHighCapacityEntry 7 } etherStatsHighCapacityPkts65to127Octets OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { etherStatsHighCapacityEntry 8 } etherStatsHighCapacityOverflowPkts128to255Octets OBJECT-TYPE SYNTAX Counter32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated etherStatsPkts128to255Octets counter has overflowed." ::= { etherStatsHighCapacityEntry 9 } etherStatsHighCapacityPkts128to255Octets OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { etherStatsHighCapacityEntry 10 } etherStatsHighCapacityOverflowPkts256to511Octets OBJECT-TYPE SYNTAX Counter32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated etherStatsPkts256to511Octets counter has overflowed." ::= { etherStatsHighCapacityEntry 11 } etherStatsHighCapacityPkts256to511Octets OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { etherStatsHighCapacityEntry 12 } etherStatsHighCapacityOverflowPkts512to1023Octets OBJECT-TYPE SYNTAX Counter32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated etherStatsPkts512to1023Octets counter has overflowed." ::= { etherStatsHighCapacityEntry 13 } etherStatsHighCapacityPkts512to1023Octets OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { etherStatsHighCapacityEntry 14 } etherStatsHighCapacityOverflowPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated etherStatsPkts1024to1518Octets counter has overflowed." ::= { etherStatsHighCapacityEntry 15 } etherStatsHighCapacityPkts1024to1518Octets OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets)." ::= { etherStatsHighCapacityEntry 16 } -- High Capacity extensions for the etherHistoryTable etherHistoryHighCapacityTable OBJECT-TYPE SYNTAX SEQUENCE OF EtherHistoryHighCapacityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains the High Capacity RMON extensions to the RMON-1 etherHistoryTable." ::= { history 6 } etherHistoryHighCapacityEntry OBJECT-TYPE SYNTAX EtherHistoryHighCapacityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains the High Capacity RMON extensions to the RMON-1 etherHistoryEntry. These objects will be created by the agent for all etherHistoryEntries associated with whichever historyControlEntries it deems appropriate. (i.e., either all etherHistoryHighCapacityEntries associated with a particular historyControlEntry will be created, or none of them will be.)" INDEX { etherHistoryIndex, etherHistorySampleIndex } ::= { etherHistoryHighCapacityTable 1 } EtherHistoryHighCapacityEntry ::= SEQUENCE { etherHistoryHighCapacityOverflowPkts Gauge32, etherHistoryHighCapacityPkts CounterBasedGauge64, etherHistoryHighCapacityOverflowOctets Gauge32, etherHistoryHighCapacityOctets CounterBasedGauge64 } etherHistoryHighCapacityOverflowPkts OBJECT-TYPE SYNTAX Gauge32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated etherHistoryPkts Gauge overflowed during this sampling interval." ::= { etherHistoryHighCapacityEntry 1 } etherHistoryHighCapacityPkts OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets, broadcast packets, and multicast packets) received during this sampling interval." ::= { etherHistoryHighCapacityEntry 2 } etherHistoryHighCapacityOverflowOctets OBJECT-TYPE SYNTAX Gauge32 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated etherHistoryOctets counter has overflowed during this sampling interval." ::= { etherHistoryHighCapacityEntry 3 } etherHistoryHighCapacityOctets OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets) during this sampling interval." ::= { etherHistoryHighCapacityEntry 4 } -- High Capacity Extensions for the hostTable END