NetWare-Host-Ext-MIB DEFINITIONS ::= BEGIN -- -- This MIB document is 'WORK IN PROGRESS' of Novell, Inc. -- As such, it is subject to change, without notice, until -- such time as it is formally released and this disclaimer -- removed. -- -- This MIB defines extensions to the HOST-RESOURCES-MIB -- for Novell NetWare servers. -- -- Last Updated: August 9, 1994 -- IMPORTS enterprises, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 ifIndex FROM RFC1213-MIB hrDeviceIndex FROM HOST-RESOURCES-MIB; -- This data type is used to model textual information in some -- character set. A network management station should use a local -- algorithm to determine which character set is in use and how it -- should be displayed. Note that this character set may be encoded -- with more than one octet per symbol, but will most often be NVT -- ASCII. -- Identifies a transport protocol. -- TransportDomain ::= INTEGER { noAddress(1), ipx(2), ip(3), appleTalkDDP(4) } -- A representation of a transport address in the domain -- specified by a paired object of type TransportDomain. -- TransportAddress ::= OCTET STRING -- novell OBJECT IDENTIFIER ::= { enterprises 23 } mibDoc OBJECT IDENTIFIER ::= { novell 2 } nwHostExtensions OBJECT IDENTIFIER ::= { mibDoc 27 } nwhrStorage OBJECT IDENTIFIER ::= { nwHostExtensions 2 } nwhrDevice OBJECT IDENTIFIER ::= { nwHostExtensions 3 } nwhrOdi OBJECT IDENTIFIER ::= { nwHostExtensions 10 } -- -- Extensions to the hrStorage Group -- -- Registration for NetWare storage types, for use with -- hrStorageType of hrStorageEntry in HOST-RESOURCES-MIB nwhrStorageTypes OBJECT IDENTIFIER ::= { nwhrStorage 1 } nwhrStorageVolume OBJECT IDENTIFIER ::= { nwhrStorageTypes 1 } nwhrStorageMemoryPermanent OBJECT IDENTIFIER ::= { nwhrStorageTypes 2 } nwhrStorageMemoryAlloc OBJECT IDENTIFIER ::= { nwhrStorageTypes 3 } nwhrStorageCacheBuffers OBJECT IDENTIFIER ::= { nwhrStorageTypes 4 } nwhrStorageCacheMovable OBJECT IDENTIFIER ::= { nwhrStorageTypes 5 } nwhrStorageCacheNonMovable OBJECT IDENTIFIER ::= { nwhrStorageTypes 6 } nwhrStorageCodeAndDataMemory OBJECT IDENTIFIER ::= { nwhrStorageTypes 7 } nwhrStorageDOSMemory OBJECT IDENTIFIER ::= { nwhrStorageTypes 8 } nwhrStorageIOEngineMemory OBJECT IDENTIFIER ::= { nwhrStorageTypes 9 } nwhrStorageMSEngineMemory OBJECT IDENTIFIER ::= { nwhrStorageTypes 10 } nwhrStorageUnclaimedMemory OBJECT IDENTIFIER ::= { nwhrStorageTypes 11 } -- -- Extensions to the hrDevice Group -- -- Registration for NetWare device types, for use with -- hrDeviceType of hrDeviceEntry in HOST-RESOURCES-MIB nwhrDeviceTypes OBJECT IDENTIFIER ::= { nwhrDevice 1 } nwhrDeviceMirroredServerLink OBJECT IDENTIFIER ::= { nwhrDeviceTypes 1 } -- memory size, expressed in units of 1024bytes KBytes ::= INTEGER (0..2147483647) InternationalDisplayString ::= OCTET STRING -- This data type is used to model textual information in some -- character set. A network management station should use a local -- algorithm to determine which character set is in use and how it -- should be displayed. Note that this character set may be encoded -- with more than one octet per symbol, but will most often be NVT -- ASCII. -- -- Extensions to the hrDeviceTable -- nwhrDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF NwhrDeviceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Extensions to the (conceptual) table of devices contained by the host" ::= { nwhrDevice 2 } nwhrDeviceEntry OBJECT-TYPE SYNTAX NwhrDeviceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Extensions to a (conceptual) entry for one device contained by the host" INDEX { hrDeviceIndex } ::= { nwhrDeviceTable 1 } NwhrDeviceEntry ::= SEQUENCE { nwhrDeviceAdapterIndex INTEGER, nwhrDeviceControllerNumber INTEGER, nwhrDeviceNumber INTEGER } nwhrDeviceAdapterIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index into the nwhrAdapterTable of the adapter/controller to which this device is attached (or physically manifested by, for logical device). Zero if not applicable." ::= { nwhrDeviceEntry 1 } nwhrDeviceControllerNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The controller number (relative to its adapter), or the SCSI target ID, or zero if not applicable. Note that zero is a valid value for both controller number and SCSI Target ID." ::= { nwhrDeviceEntry 2 } nwhrDeviceNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The device number (relative to its controller), or the SCSI LUN (Logical Unit Number), or zero if not applicable. Note that zero is a valid value for both device number and SCSI LUN." ::= { nwhrDeviceEntry 3 } nwhrProcessorCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of processor devices contained in this host" ::= { nwhrDevice 3 } nwhrPrinterCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of printer devices contained in this host" ::= { nwhrDevice 4 } nwhrDiskStorageCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of Disk Storage devices contained in this host." ::= { nwhrDevice 5 } -- -- Extensions to the hrDiskStorageTable -- nwhrDiskStorageTable OBJECT-TYPE SYNTAX SEQUENCE OF NwhrDiskStorageEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Extensions to the hrDiskStorageTable" ::= { nwhrDevice 6 } nwhrDiskStorageEntry OBJECT-TYPE SYNTAX NwhrDiskStorageEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Extensions to the hrDiskStorageEntry" INDEX { hrDeviceIndex } ::= { nwhrDiskStorageTable 1 } NwhrDiskStorageEntry ::= SEQUENCE { nwhrDiskStorageHeads INTEGER, nwhrDiskStorageCylinders INTEGER, nwhrDiskStorageSectorsPerTrack INTEGER, nwhrDiskStorageSectorSize INTEGER, nwhrDiskStorageBlockSize INTEGER } nwhrDiskStorageHeads OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of read/write heads on the drive" ::= { nwhrDiskStorageEntry 1 } nwhrDiskStorageCylinders OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of cylinders on the drive." ::= { nwhrDiskStorageEntry 2 } nwhrDiskStorageSectorsPerTrack OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of sectors per track on the drive." ::= { nwhrDiskStorageEntry 3 } nwhrDiskStorageSectorSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The size of a sector in bytes." ::= { nwhrDiskStorageEntry 4 } nwhrDiskStorageBlockSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The driver maximum I/O request size in bytes." ::= { nwhrDiskStorageEntry 5 } -- -- The Physical Partition Table -- nwhrPhysicalPartitionTable OBJECT-TYPE SYNTAX SEQUENCE OF NwhrPhysicalPartitionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of physical partitions for long-term storage devices contained by the host." ::= { nwhrDevice 7 } nwhrPhysicalPartitionEntry OBJECT-TYPE SYNTAX NwhrPhysicalPartitionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry for one partition. The hrDeviceIndex in the index represents the entry in the hrDeviceTable that corresponds to the nwhrPhysicalPartitionEntry." INDEX { hrDeviceIndex, nwhrPhysicalPartitionIndex } ::= { nwhrPhysicalPartitionTable 1 } NwhrPhysicalPartitionEntry ::= SEQUENCE { nwhrPhysicalPartitionIndex INTEGER, nwhrPhysicalPartitionType INTEGER, nwhrPhysicalPartitionDescr InternationalDisplayString, nwhrPhysicalPartitionSize KBytes } nwhrPhysicalPartitionIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each physical partition on this long-term storage device. The value for each long-term storage device must remain constant from one re- initialization of the agent to the next re- initialization." ::= { nwhrPhysicalPartitionEntry 1 } nwhrPhysicalPartitionType OBJECT-TYPE SYNTAX INTEGER { other(1), netWare(2), dos(3), inwDos(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of this physical partition." ::= { nwhrPhysicalPartitionEntry 2 } nwhrPhysicalPartitionDescr OBJECT-TYPE SYNTAX InternationalDisplayString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual description of this partition." ::= { nwhrPhysicalPartitionEntry 3 } nwhrPhysicalPartitionSize OBJECT-TYPE SYNTAX KBytes ACCESS read-only STATUS mandatory DESCRIPTION "The size (in Kilobytes) of this physical partition." ::= { nwhrPhysicalPartitionEntry 4 } -- -- The Hotfix Table -- -- The table of hotfix redirection areas for all NetWare -- partitions on the host. -- -- An entry is placed in the hotfix table for each device in -- the host whose type is `hrDeviceDiskStorage' and it -- contains a NetWare partition. -- nwhrHotfixTable OBJECT-TYPE SYNTAX SEQUENCE OF NwhrHotfixEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of hotfix areas of diskStorage devices contained by the host. Note that this table is potentially sparse: an entry exists if the corresponding value of the hrDeviceType object is `hrDeviceDiskStorage' and a NetWare partition exists on the device." ::= { nwhrDevice 8 } nwhrHotfixEntry OBJECT-TYPE SYNTAX NwhrHotfixEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry for one hotfix redirection area contained by the host." INDEX { hrDeviceIndex, nwhrPhysicalPartitionIndex } ::= { nwhrHotfixTable 1 } NwhrHotfixEntry ::= SEQUENCE { nwhrHotfixUnits INTEGER, nwhrHotfixTotal INTEGER, nwhrHotfixUsed INTEGER, nwhrHotfixReserved INTEGER } nwhrHotfixUnits OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The size, in bytes, of the hotfix blocks." ::= { nwhrHotfixEntry 1 } nwhrHotfixTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The size of the total hotfix redirection area represented by this entry, in units of nwhrHotfixUnits." ::= { nwhrHotfixEntry 2 } nwhrHotfixUsed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of hotfix redirected blocks, i.e. the number of bad blocks that hotfix has found." ::= { nwhrHotfixEntry 3 } nwhrHotfixReserved OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of hotfix redirection blocks reserved for system use." ::= { nwhrHotfixEntry 4 } -- -- The Adapter Table -- nwhrAdapterCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of adapters contained in this host." ::= { nwhrDevice 9 } nwhrAdapterTable OBJECT-TYPE SYNTAX SEQUENCE OF NwhrAdapterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "General information for each adapter board in the host: driver name and version, Interrupt, DMA, I/O address, and number of attached devices." ::= { nwhrDevice 10 } nwhrAdapterEntry OBJECT-TYPE SYNTAX NwhrAdapterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "General information for a particular adapter board in the host: driver name and version, Interrupt, DMA, I/O address, and number of attached devices." INDEX { nwhrAdapterIndex } ::= { nwhrAdapterTable 1 } NwhrAdapterEntry ::= SEQUENCE { nwhrAdapterIndex INTEGER, nwhrAdapterType OBJECT IDENTIFIER, nwhrAdapterDescr InternationalDisplayString, nwhrAdapterDriverDescr InternationalDisplayString, nwhrAdapterDriverMajorVer INTEGER, nwhrAdapterDriverMinorVer INTEGER, nwhrAdapterPort1 INTEGER, nwhrAdapterPort1Len INTEGER, nwhrAdapterPort2 INTEGER, nwhrAdapterPort2Len INTEGER, nwhrAdapterMem1 INTEGER, nwhrAdapterMem1Len INTEGER, nwhrAdapterMem2 INTEGER, nwhrAdapterMem2Len INTEGER, nwhrAdapterDMA1 INTEGER, nwhrAdapterDMA2 INTEGER, nwhrAdapterInterrupt1 INTEGER, nwhrAdapterInterrupt2 INTEGER, nwhrAdapterSlot INTEGER, nwhrAdapterDevices INTEGER } nwhrAdapterIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each adapter contained in the host. The value for each adapter must remain constant at least from one re-initialization of the agent to the next re-initialization." ::= { nwhrAdapterEntry 1 } nwhrAdapterType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "An indication of the type of adapter. This will typically be one of the possible values of hrDeviceType." ::= { nwhrAdapterEntry 2 } nwhrAdapterDescr OBJECT-TYPE SYNTAX InternationalDisplayString (SIZE(0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "A description the hardware for this adapter. This will usually include manufacturer, model, and version information. For LAN adapters, this could include the short board name and the boards burnt-in MAC address." ::= { nwhrAdapterEntry 3 } nwhrAdapterDriverDescr OBJECT-TYPE SYNTAX InternationalDisplayString (SIZE(0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual description of the driver for this adapter" ::= { nwhrAdapterEntry 4 } nwhrAdapterDriverMajorVer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The major version number of the adapter driver." ::= { nwhrAdapterEntry 5 } nwhrAdapterDriverMinorVer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minor version number of the adapter driver." ::= { nwhrAdapterEntry 6 } nwhrAdapterPort1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The primary I/O port block. This is the base address of a block of I/O addresses decoded by the adapter. The value will be zero if there is no I/O address associated with this adapter." ::= { nwhrAdapterEntry 7 } nwhrAdapterPort1Len OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of I/O ports in the block starting at nwhrAdapterPort1. This value is used in conjunction with nwhrAdapterPort1 to determine the I/O block used by the adapter. The value will be zero if there is no I/O address associated with this adapter." ::= { nwhrAdapterEntry 8 } nwhrAdapterPort2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The secondary I/O port block. This is the base address of a block of I/O addresses decoded by the adapter. The value will be zero if there is no secondary I/O address associated with this adapter." ::= { nwhrAdapterEntry 9 } nwhrAdapterPort2Len OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of I/O ports in the block starting at nwhrAdapterPort2. This value is used in conjunction with nwhrAdapterPort2 to determine the secondary I/O block used by the adapter. The value will be zero if there is no I/O address associated with this adapter." ::= { nwhrAdapterEntry 10 } nwhrAdapterMem1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The primary Memory Address. This is the base address of the primary block of memory space decoded by the adapter. The value will be zero if there is no memory address associated with this adapter." ::= { nwhrAdapterEntry 11 } nwhrAdapterMem1Len OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The length, in bytes, of the primary memory address block. From this value and nwhrAdapterMem1, a determination can be made as to which memory address ranges are in use by the adapter." ::= { nwhrAdapterEntry 12 } nwhrAdapterMem2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The secondary Memory Address. This is the address of the secondary block of memory space decoded by the adapter. The value will be zero if there is no secondary memory address associated with this adapter." ::= { nwhrAdapterEntry 13 } nwhrAdapterMem2Len OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The length, in bytes, of the secondary memory address block. From this value and nwhrAdapterMem2, a determination can be made as to which memory address ranges are in use by the adapter." ::= { nwhrAdapterEntry 14 } nwhrAdapterDMA1 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The primary DMA channel used by the adapter. The value will be 255 if this adapter does not use any DMA channel." ::= { nwhrAdapterEntry 15 } nwhrAdapterDMA2 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The secondary DMA channel used by the adapter. The value will be 255 if this adapter does not use a secondary DMA channel." ::= { nwhrAdapterEntry 16 } nwhrAdapterInterrupt1 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The primary interrupt vector used by the adapter. The value will be 255 if this adapter does not use any Interrupt." ::= { nwhrAdapterEntry 17 } nwhrAdapterInterrupt2 OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The secondary interrupt vector used by the adapter. The value will be 255 if this adapter does not use a secondary Interrupt." ::= { nwhrAdapterEntry 18 } nwhrAdapterSlot OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The slot in which the adapter resides. The value will be zero if the slot information is not available on the platform, such as an ISA based PC, otherwise the value will be the slot number the adapter resides. The slot number starts from 1." ::= { nwhrAdapterEntry 19 } nwhrAdapterDevices OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of devices associated with this adapter. For instance, the number of drives attached to a disk controller." ::= { nwhrAdapterEntry 20 } -- -- Mirrored Server Link (MSL) -- nwhrMslCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of Mirrored Server Link (MSL) devices contained in this host." ::= { nwhrDevice 11 } nwhrMslTable OBJECT-TYPE SYNTAX SEQUENCE OF NwhrMslEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The (conceptual) table of Mirrored Server Link (MSL) devices contained by the host. Note that this table is potentially sparse: a (conceptual) entry exists only if the corresponding value of the hrDeviceType object is nwhrDeviceMirroredServerLink" ::= { nwhrDevice 12 } nwhrMslEntry OBJECT-TYPE SYNTAX NwhrMslEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " A (conceptual) entry for one Mirrored Server Link (MSL) device contained by the host. The hrDeviceIndex in the index represents the entry in the hrDeviceTable that corresponds to the nwhrMslEntry." INDEX { hrDeviceIndex } ::= { nwhrMslTable 1 } NwhrMslEntry ::= SEQUENCE { nwhrMslState INTEGER, nwhrMslSpeed INTEGER, nwhrMslSends Counter, nwhrMslReceives Counter, nwhrMslInErrors Counter, nwhrMslOutErrors Counter } nwhrMslState OBJECT-TYPE SYNTAX INTEGER { offline(1), startup(2), standby(3), active(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of this MSL device." ::= { nwhrMslEntry 1 } nwhrMslSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The nominal bandwidth of the MSL link in bits per second." ::= { nwhrMslEntry 2 } nwhrMslSends OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of sends from this MSL device." ::= { nwhrMslEntry 3 } nwhrMslReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of receives by this MSL device." ::= { nwhrMslEntry 4 } nwhrMslInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of errors in receives by this MSL device." ::= { nwhrMslEntry 5 } nwhrMslOutErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of errors on sends by this MSL device." ::= { nwhrMslEntry 6 } -- -- The Printer Table -- nwhrPrinterTable OBJECT-TYPE SYNTAX SEQUENCE OF NwhrPrinterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A set of data for each accessible printer, whether local or remote." ::= { nwhrDevice 13 } nwhrPrinterEntry OBJECT-TYPE SYNTAX NwhrPrinterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A set of data for a particular printer." INDEX { nwhrPrinterID } ::= { nwhrPrinterTable 1 } NwhrPrinterEntry ::= SEQUENCE { nwhrPrinterID INTEGER, nwhrPrinterType INTEGER, nwhrPrinterLocalName InternationalDisplayString, nwhrPrinterQueueName InternationalDisplayString, nwhrPrinterServerName InternationalDisplayString, nwhrPrinterTransportDomain TransportDomain, nwhrPrinterTransportAddress TransportAddress, nwhrPrinterDeviceIndex INTEGER } nwhrPrinterID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each accessible printer. This value will be constant for the lifetime of the mapping." ::= { nwhrPrinterEntry 1 } nwhrPrinterType OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), netware(3), unixware(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the printer." ::= { nwhrPrinterEntry 2 } nwhrPrinterLocalName OBJECT-TYPE SYNTAX InternationalDisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The local name for the printer." ::= { nwhrPrinterEntry 3 } nwhrPrinterQueueName OBJECT-TYPE SYNTAX InternationalDisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The name of the print queue associated with this printer. Zero length string if printer is local." ::= { nwhrPrinterEntry 4 } nwhrPrinterServerName OBJECT-TYPE SYNTAX InternationalDisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The name of the server containing the print queue. Zero length string if printer is local." ::= { nwhrPrinterEntry 5 } nwhrPrinterTransportDomain OBJECT-TYPE SYNTAX TransportDomain ACCESS read-only STATUS mandatory DESCRIPTION "The transport domain associated with the printer (print queue)." ::= { nwhrPrinterEntry 6 } nwhrPrinterTransportAddress OBJECT-TYPE SYNTAX TransportAddress ACCESS read-only STATUS mandatory DESCRIPTION "The transport address associated with this printer (print queue). Zero length string if printer is local." ::= { nwhrPrinterEntry 7 } nwhrPrinterDeviceIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The value of hrDeviceIndex for this printer. Zero if non-local." ::= { nwhrPrinterEntry 8 } -- -- The ODI (Open Datalink Interface) Group -- -- The ODI Group provides information about Link Support Layer -- (LSL), LAN cards, WAN cards, logical LAN (frame), and -- protocols. No statistics (except for LSL which is Novell -- proprietary) are provided in these tables, management -- stations should collect LAN statistics through the -- standard MIB II, various Transmission MIBs and Protocol -- MIBs. nwhrLslOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of of SendPacket requests made to the LSL." ::= { nwhrOdi 1 } nwhrLslInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of GetStackECB requests made by MLIDs to the LSL." ::= { nwhrOdi 2 } nwhrLslUnclaimedPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of times a packet was received and not consumed by a protocol stack." ::= { nwhrOdi 3 } -- -- the Protocol Table -- nwhrProtocolTable OBJECT-TYPE SYNTAX SEQUENCE OF NwhrProtocolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Protocol Table provides basic information about protocols running in the host, management stations should refer to the appropriate protocol MIBs for the details about each protocol." ::= { nwhrOdi 4 } nwhrProtocolEntry OBJECT-TYPE SYNTAX NwhrProtocolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular protocol." INDEX { INTEGER, nwhrProtocolName } ::= { nwhrProtocolTable 1 } NwhrProtocolEntry ::= SEQUENCE { nwhrProtocolName InternationalDisplayString, nwhrProtocolID OCTET STRING, nwhrProtocolAddress InternationalDisplayString, nwhrProtocolOutPkts Counter, nwhrProtocolInPkts Counter, nwhrProtocolIgnoredPkts Counter, nwhrProtocolFullName InternationalDisplayString } nwhrProtocolName OBJECT-TYPE SYNTAX InternationalDisplayString (SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "The protocol name, for example, IPX, IP, ARP." ::= { nwhrProtocolEntry 1 } nwhrProtocolID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The protocol identifier For example: 000000000800 - IP for Ethernet II 00080007809B - AppleTalk for Ethernet SNAP" ::= { nwhrProtocolEntry 2 } nwhrProtocolAddress OBJECT-TYPE SYNTAX InternationalDisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This object provides protocol address information, for example, the Network Address on IPX network, the IP address on IP network. Note there is no format in the InternationalDisplayString and the information is not guaranteed available." ::= { nwhrProtocolEntry 3 } nwhrProtocolOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of send packet requests made to the LSL." ::= { nwhrProtocolEntry 4 } nwhrProtocolInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of incoming packets that were consumed by the protocol." ::= { nwhrProtocolEntry 5 } nwhrProtocolIgnoredPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of times the protocol receive handler was called with look ahead and the protocol did not return a receive ECB to the MLID to receive the packet" ::= { nwhrProtocolEntry 6 } nwhrProtocolFullName OBJECT-TYPE SYNTAX InternationalDisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The full name of the protocol name, for example, 'DOD Internet Protocol'." ::= { nwhrProtocolEntry 7 } -- -- Extensions to the MIB-II Interfaces table -- nwhrIfTable OBJECT-TYPE SYNTAX SEQUENCE OF NwhrIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Extensions to MIB-II's Interfaces table to add some NetWare specific info." ::= { nwhrOdi 5 } nwhrIfEntry OBJECT-TYPE SYNTAX NwhrIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "NetWare specific info for a particular interface." INDEX { INTEGER } ::= { nwhrIfTable 1 } NwhrIfEntry ::= SEQUENCE { nwhrIfLogicalBoardNumber INTEGER, nwhrIfFrameType InternationalDisplayString, nwhrIfLogicalBoardName InternationalDisplayString } nwhrIfLogicalBoardNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The logical board number." ::= { nwhrIfEntry 1 } nwhrIfFrameType OBJECT-TYPE SYNTAX InternationalDisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The frame type for this logical board." ::= { nwhrIfEntry 2 } nwhrIfLogicalBoardName OBJECT-TYPE SYNTAX InternationalDisplayString (SIZE(0..18)) ACCESS read-only STATUS mandatory DESCRIPTION "The name assigned to this logical board." ::= { nwhrIfEntry 3 } END