VRRPV3-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Integer32, mib-2, Unsigned32, Counter64, TimeTicks FROM SNMPv2-SMI -- RFC2578 TEXTUAL-CONVENTION, RowStatus, MacAddress, TruthValue, TimeStamp, TimeInterval FROM SNMPv2-TC -- RFC2579 MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF -- RFC2580 ifIndex FROM IF-MIB -- RFC2863 InetAddressType, InetAddress FROM INET-ADDRESS-MIB; -- RFC4001 vrrpv3MIB MODULE-IDENTITY LAST-UPDATED "201202130000Z" -- Feb 13, 2012 ORGANIZATION "IETF VRRP Working Group" CONTACT-INFO "WG E-Mail: vrrp@ietf.org Editor: Kalyan Tata Nokia 313 Fairchild Dr, Mountain View, CA 94043 Tata_kalyan@yahoo.com" DESCRIPTION "This MIB describes objects used for managing Virtual Router Redundancy Protocol version 3 (VRRPv3). Copyright (c) 2012 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This version of the MIB module is part of RFC 6527. Please see the RFC for full legal notices." REVISION "201202120000Z" -- Feb 13, 2012 DESCRIPTION "Initial version as published in RFC 6527." ::= { mib-2 207 } -- Textual Conventions Vrrpv3VrIdTC ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The value of the Virtual Router Identifier noted as (VRID) in RFC 5798. This, along with interface index (ifIndex) and IP version, serves to uniquely identify a virtual router on a given VRRP router." REFERENCE "RFC 5798 (Sections 3 and 5.2.3)" SYNTAX Integer32 (1..255) -- VRRPv3 MIB Groups vrrpv3Notifications OBJECT IDENTIFIER ::= { vrrpv3MIB 0 } vrrpv3Objects OBJECT IDENTIFIER ::= { vrrpv3MIB 1 } vrrpv3Conformance OBJECT IDENTIFIER ::= { vrrpv3MIB 2 } -- VRRPv3 MIB Objects vrrpv3Operations OBJECT IDENTIFIER ::= { vrrpv3Objects 1 } vrrpv3Statistics OBJECT IDENTIFIER ::= { vrrpv3Objects 2 } -- VRRPv3 Operations Table vrrpv3OperationsTable OBJECT-TYPE SYNTAX SEQUENCE OF Vrrpv3OperationsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unified Operations table for a VRRP router that consists of a sequence (i.e., one or more conceptual rows) of 'vrrpv3OperationsEntry' items each of which describe the operational characteristics of a virtual router." ::= { vrrpv3Operations 1 } vrrpv3OperationsEntry OBJECT-TYPE SYNTAX Vrrpv3OperationsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vrrpv3OperationsTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combination of ifIndex, VRID, and the IP version. ifIndex represents an interface of the router. A row must be created with vrrpv3OperationsStatus set to initialize(1) and cannot transition to backup(2) or master(3) until vrrpv3OperationsRowStatus is transitioned to active(1). The information in this table is persistent and when written the entity SHOULD save the change to non- volatile storage." INDEX { ifIndex, vrrpv3OperationsVrId, vrrpv3OperationsInetAddrType } ::= { vrrpv3OperationsTable 1 } Vrrpv3OperationsEntry ::= SEQUENCE { vrrpv3OperationsVrId Vrrpv3VrIdTC, vrrpv3OperationsInetAddrType InetAddressType, vrrpv3OperationsMasterIpAddr InetAddress, vrrpv3OperationsPrimaryIpAddr InetAddress, vrrpv3OperationsVirtualMacAddr MacAddress, vrrpv3OperationsStatus INTEGER, vrrpv3OperationsPriority Unsigned32, vrrpv3OperationsAddrCount Integer32, vrrpv3OperationsAdvInterval TimeInterval, vrrpv3OperationsPreemptMode TruthValue, vrrpv3OperationsAcceptMode TruthValue, vrrpv3OperationsUpTime TimeTicks, vrrpv3OperationsRowStatus RowStatus } vrrpv3OperationsVrId OBJECT-TYPE SYNTAX Vrrpv3VrIdTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object contains the Virtual Router Identifier (VRID)." REFERENCE "RFC 4001" ::= { vrrpv3OperationsEntry 1 } vrrpv3OperationsInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type of Vrrpv3OperationsEntry and Vrrpv3AssociatedIpAddrEntry. This value determines the type for vrrpv3OperationsMasterIpAddr, vrrpv3OperationsPrimaryIpAddr, and vrrpv3AssociatedIpAddrAddress. ipv4(1) and ipv6(2) are the only two values supported in this MIB module." REFERENCE "RFC 4001" ::= { vrrpv3OperationsEntry 2 } vrrpv3OperationsMasterIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The master router's real IP address. The master router would set this address to vrrpv3OperationsPrimaryIpAddr while transitioning to master state. For backup routers, this is the IP address listed as the source in VRRP advertisement last received by this virtual router." REFERENCE "RFC 5798" ::= { vrrpv3OperationsEntry 3 } vrrpv3OperationsPrimaryIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "In the case where there is more than one IP Address (associated IP addresses) for a given 'ifIndex', this object is used to specify the IP address that will become the vrrpv3OperationsMasterIpAddr', should the virtual router transition from backup state to master." ::= { vrrpv3OperationsEntry 4 } vrrpv3OperationsVirtualMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual MAC address of the virtual router. Although this object can be derived from the 'vrrpv3OperationsVrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRRP-related SNMP notifications." ::= { vrrpv3OperationsEntry 5 } vrrpv3OperationsStatus OBJECT-TYPE SYNTAX INTEGER { initialize(1), backup(2), master(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the virtual router. This object has three defined values: - 'initialize', which indicates that the virtual router is waiting for a startup event. - 'backup', which indicates that the virtual router is monitoring the availability of the master router. - 'master', which indicates that the virtual router is forwarding packets for IP addresses that are associated with this router." REFERENCE "RFC 5798" ::= { vrrpv3OperationsEntry 6 } vrrpv3OperationsPriority OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the priority to be used for the virtual router master election process; higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP, and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es) for VRRP over IPv4 and hence is not settable. Setting the values of this object to 0 or 255 should be rejected by the agents implementing this MIB module. For example, an SNMP agent would return 'badValue(3)' when a user tries to set the values 0 or 255 for this object." REFERENCE "RFC 5798, Section 6.1" DEFVAL { 100 } ::= { vrrpv3OperationsEntry 7 } vrrpv3OperationsAddrCount OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpv3AssociatedAddrTable that correspond to a given ifIndex/VRID/IP version." REFERENCE "RFC 5798, Section 6.1" ::= { vrrpv3OperationsEntry 8 } vrrpv3OperationsAdvInterval OBJECT-TYPE SYNTAX TimeInterval (1..4095) UNITS "centiseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The time interval, in centiseconds, between sending advertisement messages. Only the master router sends VRRP advertisements." REFERENCE "RFC 5798, Section 6.1" DEFVAL { 100} ::= { vrrpv3OperationsEntry 9 } vrrpv3OperationsPreemptMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Controls whether a higher priority virtual router will preempt a lower priority master." REFERENCE "RFC 5798, Section 6.1" DEFVAL { true } ::= { vrrpv3OperationsEntry 10 } vrrpv3OperationsAcceptMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Controls whether a virtual router in master state will accept packets addressed to the address owner's IPv6 address as its own if it is not the IPv6 address owner. Default is false(2). This object is not relevant for rows representing VRRP over IPv4 and should be set to false(2)." DEFVAL { false } ::= { vrrpv3OperationsEntry 11 } vrrpv3OperationsUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This value represents the amount of time, in TimeTicks (hundredth of a second), since this virtual router (i.e., the 'vrrpv3OperationsStatus') transitioned out of 'initialize'." REFERENCE "RFC 5798, Section 6.1" ::= { vrrpv3OperationsEntry 12 } vrrpv3OperationsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus variable should be used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the 'vrrpv3OperationsRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of vrrpv3OperationsInetAddrType, vrrpv3OperationsVrId, and vrrpv3OperationsPrimaryIpAddr has been set, and there is at least one active row in the 'vrrpv3AssociatedIpAddrTable' defining an associated IP address. notInService(2) should be used to administratively bring the row down. A typical order of operation to add a row is: 1. Create a row in vrrpv3OperationsTable with createAndWait(5). 2. Create one or more corresponding rows in vrrpv3AssociatedIpAddrTable. 3. Populate the vrrpv3OperationsEntry. 4. Set vrrpv3OperationsRowStatus to active(1). A typical order of operation to delete an entry is: 1. Set vrrpv3OperationsRowStatus to notInService(2). 2. Set the corresponding rows in vrrpv3AssociatedIpAddrTable to destroy(6) to delete the entry. 3. Set vrrpv3OperationsRowStatus to destroy(6) to delete the entry." ::= { vrrpv3OperationsEntry 13 } -- VRRP Associated Address Table vrrpv3AssociatedIpAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF Vrrpv3AssociatedIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of addresses associated with each virtual router." ::= { vrrpv3Operations 2 } vrrpv3AssociatedIpAddrEntry OBJECT-TYPE SYNTAX Vrrpv3AssociatedIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table contains an IP address that is associated with a virtual router. The number of rows for a given IP version, VrID, and ifIndex will equal the number of IP addresses associated (e.g., backed up) by the virtual router (equivalent to 'vrrpv3OperationsIpAddrCount'). Rows in the table cannot be modified unless the value of 'vrrpv3OperationsStatus' for the corresponding entry in the vrrpv3OperationsTable has transitioned to initialize(1). The information in this table is persistent and when written the entity SHOULD save the change to non- volatile storage." INDEX { ifIndex, vrrpv3OperationsVrId, vrrpv3OperationsInetAddrType, vrrpv3AssociatedIpAddrAddress } ::= { vrrpv3AssociatedIpAddrTable 1 } Vrrpv3AssociatedIpAddrEntry ::= SEQUENCE { vrrpv3AssociatedIpAddrAddress InetAddress, vrrpv3AssociatedIpAddrRowStatus RowStatus } vrrpv3AssociatedIpAddrAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The assigned IP addresses that a virtual router is responsible for backing up. The IP address type is determined by the value of vrrpv3OperationsInetAddrType in the index of this row." REFERENCE "RFC 5798" ::= { vrrpv3AssociatedIpAddrEntry 1 } vrrpv3AssociatedIpAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Setting this object to active(1) results in the addition of an associated address for a virtual router. Setting this object to notInService(2) results in administratively bringing down the row. Destroying the entry or setting it to destroy(6) removes the associated address from the virtual router. The use of other values is implementation-dependent. Implementations should not allow deletion of the last row corresponding to an active row in vrrpv3OperationsTable. Refer to the description of vrrpv3OperationsRowStatus for typical row creation and deletion scenarios." ::= { vrrpv3AssociatedIpAddrEntry 2 } -- VRRP Router Statistics vrrpv3RouterChecksumErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received with an invalid VRRP checksum value. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpv3GlobalStatisticsDiscontinuityTime." REFERENCE "RFC 5798, Section 5.2.8" ::= { vrrpv3Statistics 1 } vrrpv3RouterVersionErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received with an unknown or unsupported version number. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpv3GlobalStatisticsDiscontinuityTime." REFERENCE "RFC 5798, Section 5.2.1" ::= { vrrpv3Statistics 2 } vrrpv3RouterVrIdErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received with a VRID that is not valid for any virtual router on this router. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpv3GlobalStatisticsDiscontinuityTime." REFERENCE "RFC 5798, Section 5.2.3" ::= { vrrpv3Statistics 3 } vrrpv3GlobalStatisticsDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which one of vrrpv3RouterChecksumErrors, vrrpv3RouterVersionErrors, and vrrpv3RouterVrIdErrors suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value." ::= { vrrpv3Statistics 4 } -- VRRP Router Statistics Table vrrpv3StatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF Vrrpv3StatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of virtual router statistics." ::= { vrrpv3Statistics 5 } vrrpv3StatisticsEntry OBJECT-TYPE SYNTAX Vrrpv3StatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table containing statistics information about a given virtual router." AUGMENTS { vrrpv3OperationsEntry } ::= { vrrpv3StatisticsTable 1 } Vrrpv3StatisticsEntry ::= SEQUENCE { vrrpv3StatisticsMasterTransitions Counter32, vrrpv3StatisticsNewMasterReason INTEGER, vrrpv3StatisticsRcvdAdvertisements Counter64, vrrpv3StatisticsAdvIntervalErrors Counter64, vrrpv3StatisticsIpTtlErrors Counter64, vrrpv3StatisticsProtoErrReason INTEGER, vrrpv3StatisticsRcvdPriZeroPackets Counter64, vrrpv3StatisticsSentPriZeroPackets Counter64, vrrpv3StatisticsRcvdInvalidTypePackets Counter64, vrrpv3StatisticsAddressListErrors Counter64, vrrpv3StatisticsPacketLengthErrors Counter64, vrrpv3StatisticsRowDiscontinuityTime TimeStamp, vrrpv3StatisticsRefreshRate Unsigned32 } vrrpv3StatisticsMasterTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times that this virtual router's state has transitioned to master state. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpv3StatisticsRowDiscontinuityTime." ::= { vrrpv3StatisticsEntry 1 } vrrpv3StatisticsNewMasterReason OBJECT-TYPE SYNTAX INTEGER { notMaster (0), priority (1), preempted (2), masterNoResponse (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the reason for the virtual router to transition to master state. If the virtual router never transitioned to master state, the value of this object is notMaster(0). Otherwise, this indicates the reason this virtual router transitioned to master state the last time. Used by vrrpv3NewMaster notification." ::= { vrrpv3StatisticsEntry 2 } vrrpv3StatisticsRcvdAdvertisements OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP advertisements received by this virtual router. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpv3StatisticsRowDiscontinuityTime." ::= { vrrpv3StatisticsEntry 3 } vrrpv3StatisticsAdvIntervalErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP advertisement packets received for which the advertisement interval is different from the vrrpv3OperationsAdvInterval configured on this virtual router. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpv3StatisticsRowDiscontinuityTime." ::= { vrrpv3StatisticsEntry 4 } vrrpv3StatisticsIpTtlErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received by the virtual router with IPv4 TTL (for VRRP over IPv4) or IPv6 Hop Limit (for VRRP over IPv6) not equal to 255. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpv3StatisticsRowDiscontinuityTime." REFERENCE "RFC 5798, Section 5.1.1.3" ::= { vrrpv3StatisticsEntry 5 } vrrpv3StatisticsProtoErrReason OBJECT-TYPE SYNTAX INTEGER { noError (0), ipTtlError (1), versionError (2), checksumError (3), vrIdError(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the reason for the last protocol error. This SHOULD be set to noError(0) when no protocol errors are encountered. Used by vrrpv3ProtoError notification." ::= { vrrpv3StatisticsEntry 6 } vrrpv3StatisticsRcvdPriZeroPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received by the virtual router with a priority of '0'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpv3StatisticsRowDiscontinuityTime." REFERENCE "RFC 5798, Section 5.2.4" ::= { vrrpv3StatisticsEntry 7 } vrrpv3StatisticsSentPriZeroPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets sent by the virtual router with a priority of '0'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpv3StatisticsRowDiscontinuityTime." REFERENCE "RFC 5798, Section 5.2.4" ::= { vrrpv3StatisticsEntry 8 } vrrpv3StatisticsRcvdInvalidTypePackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of VRRP packets received by the virtual router with an invalid value in the 'type' field. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpv3StatisticsRowDiscontinuityTime." ::= { vrrpv3StatisticsEntry 9 } vrrpv3StatisticsAddressListErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received for which the address list does not match the locally configured list for the virtual router. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpv3StatisticsRowDiscontinuityTime." ::= { vrrpv3StatisticsEntry 10 } vrrpv3StatisticsPacketLengthErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a packet length less than the length of the VRRP header. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpv3StatisticsRowDiscontinuityTime." ::= { vrrpv3StatisticsEntry 11 } vrrpv3StatisticsRowDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value." ::= { vrrpv3StatisticsEntry 12 } vrrpv3StatisticsRefreshRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum reasonable polling interval for this entry. This object provides an indication of the minimum amount of time required to update the counters in this entry." ::= { vrrpv3StatisticsEntry 13 } -- Notification Definitions -- Notifications may be controlled using SNMP-NOTIFICATION-MIB vrrpv3NewMaster NOTIFICATION-TYPE OBJECTS { vrrpv3OperationsMasterIpAddr, vrrpv3StatisticsNewMasterReason } STATUS current DESCRIPTION "The newMaster notification indicates that the sending agent has transitioned to master state." ::= { vrrpv3Notifications 1 } vrrpv3ProtoError NOTIFICATION-TYPE OBJECTS { vrrpv3StatisticsProtoErrReason } STATUS current DESCRIPTION "The notification indicates that the sending agent has encountered the protocol error indicated by vrrpv3StatisticsProtoErrReason." ::= { vrrpv3Notifications 2 } -- Conformance Information vrrpv3Compliances OBJECT IDENTIFIER ::= { vrrpv3Conformance 1 } vrrpv3Groups OBJECT IDENTIFIER ::= { vrrpv3Conformance 2 } -- Compliance Statements vrrpv3FullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement" MODULE -- this module MANDATORY-GROUPS { vrrpv3OperationsGroup, vrrpv3StatisticsGroup, vrrpv3InfoGroup, vrrpv3NotificationsGroup } OBJECT vrrpv3OperationsPriority WRITE-SYNTAX Unsigned32 (1..254) DESCRIPTION "Setable values are from 1 to 254." ::= { vrrpv3Compliances 1 } vrrpv3ReadOnlyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "When this MIB module is implemented without support for read-create (i.e., in read-only mode), then such an implementation can claim read-only compliance. Such a device can then be monitored, but cannot be configured with this MIB." MODULE -- this module MANDATORY-GROUPS { vrrpv3OperationsGroup, vrrpv3StatisticsGroup, vrrpv3StatisticsDiscontinuityGroup, vrrpv3InfoGroup, vrrpv3NotificationsGroup } OBJECT vrrpv3OperationsPriority MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT vrrpv3OperationsPrimaryIpAddr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT vrrpv3OperationsAdvInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT vrrpv3OperationsPreemptMode MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT vrrpv3OperationsAcceptMode MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT vrrpv3OperationsRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT vrrpv3AssociatedIpAddrRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { vrrpv3Compliances 2 } -- Conformance Groups vrrpv3OperationsGroup OBJECT-GROUP OBJECTS { vrrpv3OperationsVirtualMacAddr, vrrpv3OperationsStatus, vrrpv3OperationsPriority, vrrpv3OperationsMasterIpAddr, vrrpv3OperationsAdvInterval, vrrpv3OperationsPreemptMode, vrrpv3OperationsAcceptMode, vrrpv3OperationsUpTime, vrrpv3OperationsRowStatus, vrrpv3OperationsAddrCount, vrrpv3OperationsPrimaryIpAddr, vrrpv3AssociatedIpAddrRowStatus } STATUS current DESCRIPTION "Conformance group for VRRPv3 operations." ::= { vrrpv3Groups 1 } vrrpv3StatisticsGroup OBJECT-GROUP OBJECTS { vrrpv3RouterChecksumErrors, vrrpv3RouterVersionErrors, vrrpv3RouterVrIdErrors, vrrpv3StatisticsMasterTransitions, vrrpv3StatisticsNewMasterReason, vrrpv3StatisticsRcvdAdvertisements, vrrpv3StatisticsAdvIntervalErrors, vrrpv3StatisticsRcvdPriZeroPackets, vrrpv3StatisticsSentPriZeroPackets, vrrpv3StatisticsRcvdInvalidTypePackets, vrrpv3StatisticsIpTtlErrors, vrrpv3StatisticsProtoErrReason, vrrpv3StatisticsAddressListErrors, vrrpv3StatisticsPacketLengthErrors, vrrpv3StatisticsRowDiscontinuityTime, vrrpv3StatisticsRefreshRate } STATUS current DESCRIPTION "Conformance group for VRRPv3 statistics." ::= { vrrpv3Groups 2 } vrrpv3StatisticsDiscontinuityGroup OBJECT-GROUP OBJECTS { vrrpv3GlobalStatisticsDiscontinuityTime } STATUS current DESCRIPTION "Objects providing information about counter discontinuities." ::= { vrrpv3Groups 3 } vrrpv3InfoGroup OBJECT-GROUP OBJECTS { vrrpv3StatisticsProtoErrReason, vrrpv3StatisticsNewMasterReason } STATUS current DESCRIPTION "Conformance group for objects contained in VRRPv3 notifications." ::= { vrrpv3Groups 4 } vrrpv3NotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { vrrpv3NewMaster, vrrpv3ProtoError } STATUS current DESCRIPTION "The VRRP MIB Notification Group." ::= { vrrpv3Groups 5 } END