-- -- Accedian Enterprise Specific MIB -- -- Copyright (c) 2005-2008, Accedian Networks, Inc. -- All rights reserved. -- -- The contents of this document are subject to change without notice. -- ACD-CFM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Counter32, Counter64, Gauge32 FROM SNMPv2-SMI TruthValue, DateAndTime, RowStatus, DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF acdMibs FROM ACCEDIAN-SMI; acdCfm MODULE-IDENTITY LAST-UPDATED "201112210100Z" ORGANIZATION "Accedian Networks, Inc." CONTACT-INFO "Accedian Technical Assistance Center Accedian Networks, Inc. 4878 Levy, suite 202 Saint-Laurent, Quebec Canada H4R 2P1 E-mail: support@accedian.com" DESCRIPTION "This MIB is complementary to the IEEE P802.1ag(TM) CFM MIB. It covers the delay measurment and the packet loss configuration and results." REVISION "201112210100Z" -- 21 Dec 2011 DESCRIPTION "Add support for ETH-SLM Tx/Rx PDU counters." REVISION "201112200100Z" -- 20 Dec 2011 DESCRIPTION "Add support for ETH-CSF Tx/Rx PDU counters." REVISION "201109210100Z" -- 21 Sept 2011 DESCRIPTION "Add support for CFM Stack Table." REVISION "201103300100Z" -- 30 Mars 2011 DESCRIPTION "Add support for Instantaneous values." REVISION "200911010100Z" -- 1 Nov 2009 DESCRIPTION "Add support for extended packet loss ratio." REVISION "200902230100Z" -- 23 Feb 2009 DESCRIPTION "Add support for extended packet loss ratio." REVISION "200805010100Z" -- 1 May 2008 DESCRIPTION "Initial version of MIB module ACD-CFM-MIB." ::= { acdMibs 7 } acdCfmNotifications OBJECT IDENTIFIER ::= { acdCfm 0 } acdCfmMIBObjects OBJECT IDENTIFIER ::= { acdCfm 1 } acdCfmConformance OBJECT IDENTIFIER ::= { acdCfm 2 } acdCfmDelayMeasurement OBJECT IDENTIFIER ::= { acdCfmMIBObjects 1 } acdCfmPacketLoss OBJECT IDENTIFIER ::= { acdCfmMIBObjects 2 } acdCfmMep OBJECT IDENTIFIER ::= { acdCfmMIBObjects 3 } acdCfmStack OBJECT IDENTIFIER ::= { acdCfmMIBObjects 4 } acdCfmSlm OBJECT IDENTIFIER ::= { acdCfmMIBObjects 5 } --------------------------------------------------------------------------- -- The Delay Measurement configuration table -- This table contains all Delay Measurement entry configurations. --------------------------------------------------------------------------- acdCfmDmCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdCfmDmCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration table of all DM entries." ::= { acdCfmDelayMeasurement 1 } acdCfmDmCfgEntry OBJECT-TYPE SYNTAX AcdCfmDmCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of all settings to manage a DM instance." INDEX { acdCfmDmCfgID } ::= { acdCfmDmCfgTable 1 } AcdCfmDmCfgEntry ::= SEQUENCE { acdCfmDmCfgID Unsigned32, acdCfmDmCfgRowStatus RowStatus, acdCfmDmCfgMepIdx Unsigned32, acdCfmDmCfgRemoteMepId Unsigned32, acdCfmDmCfgPriority Unsigned32, acdCfmDmCfgEnable TruthValue, acdCfmDmCfgInterval Unsigned32, acdCfmDmCfgRefPeriod Unsigned32, acdCfmDmCfgOneWayDelayEnable TruthValue, acdCfmDmCfgOneWayDelayMax Unsigned32, acdCfmDmCfgOneWayDelayThresh Unsigned32, acdCfmDmCfgOneWayAvgDelayThresh Unsigned32, acdCfmDmCfgOneWayDvEnable TruthValue, acdCfmDmCfgOneWayDvMax Unsigned32, acdCfmDmCfgOneWayDvThresh Unsigned32, acdCfmDmCfgOneWayAvgDvThresh Unsigned32, acdCfmDmCfgTwoWayDelayEnable TruthValue, acdCfmDmCfgTwoWayDelayMax Unsigned32, acdCfmDmCfgTwoWayDelayThresh Unsigned32, acdCfmDmCfgTwoWayAvgDelayThresh Unsigned32, acdCfmDmCfgTwoWayDvEnable TruthValue, acdCfmDmCfgTwoWayDvMax Unsigned32, acdCfmDmCfgTwoWayDvThresh Unsigned32, acdCfmDmCfgTwoWayAvgDvThresh Unsigned32 } acdCfmDmCfgID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each Delay Measurement instance. This value follows the ordering of the results table." ::= { acdCfmDmCfgEntry 1 } acdCfmDmCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "All columns must have a valid value before a row can be activated." ::= { acdCfmDmCfgEntry 2 } acdCfmDmCfgMepIdx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Maintenance association End Point Identifier." ::= { acdCfmDmCfgEntry 3 } acdCfmDmCfgRemoteMepId OBJECT-TYPE SYNTAX Unsigned32 (1..8191) MAX-ACCESS read-create STATUS current DESCRIPTION "Remote Maintenance association End Point Identifier used for this delay measurement configuration." ::= { acdCfmDmCfgEntry 4 } acdCfmDmCfgPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN priority. Its value ranges from 0 to 7." DEFVAL { 0 } ::= { acdCfmDmCfgEntry 5 } acdCfmDmCfgEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable CFM to issues DMM measurement packets." DEFVAL { false } ::= { acdCfmDmCfgEntry 6 } acdCfmDmCfgInterval OBJECT-TYPE SYNTAX Unsigned32 (1..60000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Interval in milliseconds at which CFM issues DMM measurement packets." DEFVAL { 10000 } ::= { acdCfmDmCfgEntry 7 } acdCfmDmCfgRefPeriod OBJECT-TYPE SYNTAX Unsigned32 (1..1440) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "Reference period in minutes for Delay Measurement." DEFVAL { 15 } ::= { acdCfmDmCfgEntry 8 } acdCfmDmCfgOneWayDelayEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable CFM to compute one-way delay measurements." DEFVAL { true } ::= { acdCfmDmCfgEntry 9 } acdCfmDmCfgOneWayDelayMax OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum allowed instantaneous delay in milliseconds." DEFVAL { 50 } ::= { acdCfmDmCfgEntry 10 } acdCfmDmCfgOneWayDelayThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of consecutive delay greater than the maximum allowed value before alert." DEFVAL { 4 } ::= { acdCfmDmCfgEntry 11 } acdCfmDmCfgOneWayAvgDelayThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "One-way average delay threshold in milliseconds." DEFVAL { 50 } ::= { acdCfmDmCfgEntry 12 } acdCfmDmCfgOneWayDvEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable CFM to compute one-way delay variation measurements." DEFVAL { true } ::= { acdCfmDmCfgEntry 13 } acdCfmDmCfgOneWayDvMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum allowed instantaneous delay variation in milliseconds." DEFVAL { 50 } ::= { acdCfmDmCfgEntry 14 } acdCfmDmCfgOneWayDvThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of consecutive delay variation greater than the maximum allowed value before alert." DEFVAL { 10 } ::= { acdCfmDmCfgEntry 15 } acdCfmDmCfgOneWayAvgDvThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "One-way average delay variation threshold in milliseconds." DEFVAL { 4 } ::= { acdCfmDmCfgEntry 16 } acdCfmDmCfgTwoWayDelayEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable CFM to compute Two-way delay measurements." DEFVAL { true } ::= { acdCfmDmCfgEntry 17 } acdCfmDmCfgTwoWayDelayMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum allowed instantaneous delay in milliseconds." DEFVAL { 100 } ::= { acdCfmDmCfgEntry 18 } acdCfmDmCfgTwoWayDelayThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of consecutive delay greater than the maximum allowed value before alert." DEFVAL { 40 } ::= { acdCfmDmCfgEntry 19 } acdCfmDmCfgTwoWayAvgDelayThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Two-way average delay threshold in milliseconds." DEFVAL { 100 } ::= { acdCfmDmCfgEntry 20 } acdCfmDmCfgTwoWayDvEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable CFM to compute Two-way delay variation measurements." DEFVAL { true } ::= { acdCfmDmCfgEntry 21 } acdCfmDmCfgTwoWayDvMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum allowed instantaneous delay variation in milliseconds." DEFVAL { 10 } ::= { acdCfmDmCfgEntry 22 } acdCfmDmCfgTwoWayDvThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of consecutive delay variation greater than the maximum allowed value before alert." DEFVAL { 4 } ::= { acdCfmDmCfgEntry 23 } acdCfmDmCfgTwoWayAvgDvThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Two-way average delay variation threshold in milliseconds." DEFVAL { 10 } ::= { acdCfmDmCfgEntry 24 } --------------------------------------------------------------------------- -- The CFM DMM One Way delay Results table -- This table contains all CFM DMM One Way delay entry results. --------------------------------------------------------------------------- acdCfmResultOneWayDelayTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdCfmResultOneWayDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One way delay result table of all DM entries." ::= { acdCfmDelayMeasurement 2 } acdCfmResultOneWayDelayEntry OBJECT-TYPE SYNTAX AcdCfmResultOneWayDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of One Way Delay results for a DM entry." INDEX { acdCfmResultOneWayDelayID } ::= { acdCfmResultOneWayDelayTable 1 } AcdCfmResultOneWayDelayEntry ::= SEQUENCE { acdCfmResultOneWayDelayID Unsigned32, acdCfmResultOneWayDelayPeriodIndex Unsigned32, acdCfmResultOneWayDelayIntervalStart DateAndTime, acdCfmResultOneWayDelayValid TruthValue, acdCfmResultOneWayDelayAlert TruthValue, acdCfmResultOneWayDelayAvgAlert TruthValue, acdCfmResultOneWayDelaySamples Unsigned32, acdCfmResultOneWayDelayMinValue Integer32, acdCfmResultOneWayDelayMaxValue Integer32, acdCfmResultOneWayDelayAvgValue Integer32, acdCfmResultOneWayDelayThreshExc Unsigned32, acdCfmResultOneWayDelayInstValue Integer32 } acdCfmResultOneWayDelayID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each Delay Measurement instance. This value follows the ordering of the Dm table." ::= { acdCfmResultOneWayDelayEntry 1 } acdCfmResultOneWayDelayPeriodIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period." ::= { acdCfmResultOneWayDelayEntry 2 } acdCfmResultOneWayDelayIntervalStart OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This is the time of the start of the period." ::= { acdCfmResultOneWayDelayEntry 3 } acdCfmResultOneWayDelayValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the One-way delay results during this sampling interval." ::= { acdCfmResultOneWayDelayEntry 4 } acdCfmResultOneWayDelayAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the presence of the One Way Delay alert." ::= { acdCfmResultOneWayDelayEntry 5 } acdCfmResultOneWayDelayAvgAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the presence of the One Way Average Delay alert." ::= { acdCfmResultOneWayDelayEntry 6 } acdCfmResultOneWayDelaySamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate One-way delay results." ::= { acdCfmResultOneWayDelayEntry 7 } acdCfmResultOneWayDelayMinValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the One-way delay minimum value. The value is expressed in micro-seconds." ::= { acdCfmResultOneWayDelayEntry 8 } acdCfmResultOneWayDelayMaxValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the One-way delay maximum value. The value is expressed in micro-seconds." ::= { acdCfmResultOneWayDelayEntry 9 } acdCfmResultOneWayDelayAvgValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the One-way delay average value. The value is expressed in micro-seconds." ::= { acdCfmResultOneWayDelayEntry 10} acdCfmResultOneWayDelayThreshExc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples exceeding the limit." ::= { acdCfmResultOneWayDelayEntry 11 } acdCfmResultOneWayDelayInstValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the One-way delay Instantaneous value. The value is expressed in micro-seconds." ::= { acdCfmResultOneWayDelayEntry 12 } --------------------------------------------------------------------------- -- The CFM DMM One Way delay variation Results table -- This table contains all CFM DMM One Way delay variation entry results. --------------------------------------------------------------------------- acdCfmResultOneWayDvTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdCfmResultOneWayDvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One way delay variation result table of all DM entries." ::= { acdCfmDelayMeasurement 3 } acdCfmResultOneWayDvEntry OBJECT-TYPE SYNTAX AcdCfmResultOneWayDvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of One Way Delay variation results for a DM entry." INDEX { acdCfmResultOneWayDvID } ::= { acdCfmResultOneWayDvTable 1 } AcdCfmResultOneWayDvEntry ::= SEQUENCE { acdCfmResultOneWayDvID Unsigned32, acdCfmResultOneWayDvPeriodIndex Unsigned32, acdCfmResultOneWayDvIntervalStart DateAndTime, acdCfmResultOneWayDvValid TruthValue, acdCfmResultOneWayDvAlert TruthValue, acdCfmResultOneWayDvAvgAlert TruthValue, acdCfmResultOneWayDvSamples Unsigned32, acdCfmResultOneWayDvMinValue Integer32, acdCfmResultOneWayDvMaxValue Integer32, acdCfmResultOneWayDvAvgValue Integer32, acdCfmResultOneWayDvThreshExc Unsigned32, acdCfmResultOneWayDvInstValue Integer32 } acdCfmResultOneWayDvID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each Delay variation Measurement instance. This value follows the ordering of the DM table." ::= { acdCfmResultOneWayDvEntry 1 } acdCfmResultOneWayDvPeriodIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period." ::= { acdCfmResultOneWayDvEntry 2 } acdCfmResultOneWayDvIntervalStart OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This is the time of the start of the period." ::= { acdCfmResultOneWayDvEntry 3 } acdCfmResultOneWayDvValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the One-way delay variation results during this sampling interval." ::= { acdCfmResultOneWayDvEntry 4 } acdCfmResultOneWayDvAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the presence of the One Way Delay variation alert." ::= { acdCfmResultOneWayDvEntry 5 } acdCfmResultOneWayDvAvgAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the presence of the One Way Average Delay variation alert." ::= { acdCfmResultOneWayDvEntry 6 } acdCfmResultOneWayDvSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate One-way delay variation results." ::= { acdCfmResultOneWayDvEntry 7 } acdCfmResultOneWayDvMinValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the One-way delay variation minimum value. The value is expressed in micro-seconds." ::= { acdCfmResultOneWayDvEntry 8 } acdCfmResultOneWayDvMaxValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the One-way delay variationmaximum value. The value is expressed in micro-seconds." ::= { acdCfmResultOneWayDvEntry 9 } acdCfmResultOneWayDvAvgValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the One-way delay variation average value. The value is expressed in micro-seconds." ::= { acdCfmResultOneWayDvEntry 10} acdCfmResultOneWayDvThreshExc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples exceeding the limit." ::= { acdCfmResultOneWayDvEntry 11 } acdCfmResultOneWayDvInstValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the One-way delay variation Instantaneous value. The value is expressed in micro-seconds." ::= { acdCfmResultOneWayDvEntry 12 } --------------------------------------------------------------------------- -- The CFM DMM Two Way delay Results table -- This table contains all CFM DMM Two Way delay entry results. --------------------------------------------------------------------------- acdCfmResultTwoWayDelayTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdCfmResultTwoWayDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Two way delay result table of all DM entries." ::= { acdCfmDelayMeasurement 4 } acdCfmResultTwoWayDelayEntry OBJECT-TYPE SYNTAX AcdCfmResultTwoWayDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of Two Way Delay results for a DM entry." INDEX { acdCfmResultTwoWayDelayID } ::= { acdCfmResultTwoWayDelayTable 1 } AcdCfmResultTwoWayDelayEntry ::= SEQUENCE { acdCfmResultTwoWayDelayID Unsigned32, acdCfmResultTwoWayDelayPeriodIndex Unsigned32, acdCfmResultTwoWayDelayIntervalStart DateAndTime, acdCfmResultTwoWayDelayValid TruthValue, acdCfmResultTwoWayDelayAlert TruthValue, acdCfmResultTwoWayDelayAvgAlert TruthValue, acdCfmResultTwoWayDelaySamples Unsigned32, acdCfmResultTwoWayDelayMinValue Integer32, acdCfmResultTwoWayDelayMaxValue Integer32, acdCfmResultTwoWayDelayAvgValue Integer32, acdCfmResultTwoWayDelayThreshExc Unsigned32, acdCfmResultTwoWayDelayInstValue Integer32 } acdCfmResultTwoWayDelayID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each Delay Measurement instance. This value follows the ordering of the Dm table." ::= { acdCfmResultTwoWayDelayEntry 1 } acdCfmResultTwoWayDelayPeriodIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period." ::= { acdCfmResultTwoWayDelayEntry 2 } acdCfmResultTwoWayDelayIntervalStart OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This is the time of the start of the period." ::= { acdCfmResultTwoWayDelayEntry 3 } acdCfmResultTwoWayDelayValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the Two way delay results during this sampling interval." ::= { acdCfmResultTwoWayDelayEntry 4 } acdCfmResultTwoWayDelayAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the presence of the Two Way Delay alert." ::= { acdCfmResultTwoWayDelayEntry 5 } acdCfmResultTwoWayDelayAvgAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the presence of the Two Way Average Delay alert." ::= { acdCfmResultTwoWayDelayEntry 6 } acdCfmResultTwoWayDelaySamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate Two-way delay results." ::= { acdCfmResultTwoWayDelayEntry 7 } acdCfmResultTwoWayDelayMinValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Two-way delay minimum value. The value is expressed in micro-seconds." ::= { acdCfmResultTwoWayDelayEntry 8 } acdCfmResultTwoWayDelayMaxValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Two-way delay maximum value. The value is expressed in micro-seconds." ::= { acdCfmResultTwoWayDelayEntry 9 } acdCfmResultTwoWayDelayAvgValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Two-way delay average value. The value is expressed in micro-seconds." ::= { acdCfmResultTwoWayDelayEntry 10} acdCfmResultTwoWayDelayThreshExc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples exceeding the limit." ::= { acdCfmResultTwoWayDelayEntry 11 } acdCfmResultTwoWayDelayInstValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Two-way delay Instantaneous value. The value is expressed in micro-seconds." ::= { acdCfmResultTwoWayDelayEntry 12 } --------------------------------------------------------------------------- -- The CFM DMM Two Way delay variation Results table -- This table contains all CFM DMM Two Way delay variation entry results. --------------------------------------------------------------------------- acdCfmResultTwoWayDvTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdCfmResultTwoWayDvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Two way delay variation result table of all DM entries." ::= { acdCfmDelayMeasurement 5 } acdCfmResultTwoWayDvEntry OBJECT-TYPE SYNTAX AcdCfmResultTwoWayDvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of One Way Delay variation results for a DM entry." INDEX { acdCfmResultTwoWayDvID } ::= { acdCfmResultTwoWayDvTable 1 } AcdCfmResultTwoWayDvEntry ::= SEQUENCE { acdCfmResultTwoWayDvID Unsigned32, acdCfmResultTwoWayDvPeriodIndex Unsigned32, acdCfmResultTwoWayDvIntervalStart DateAndTime, acdCfmResultTwoWayDvValid TruthValue, acdCfmResultTwoWayDvAlert TruthValue, acdCfmResultTwoWayDvAvgAlert TruthValue, acdCfmResultTwoWayDvSamples Unsigned32, acdCfmResultTwoWayDvMinValue Integer32, acdCfmResultTwoWayDvMaxValue Integer32, acdCfmResultTwoWayDvAvgValue Integer32, acdCfmResultTwoWayDvThreshExc Unsigned32, acdCfmResultTwoWayDvInstValue Integer32 } acdCfmResultTwoWayDvID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each Delay variation Measurement instance. This value follows the ordering of the Dm table." ::= { acdCfmResultTwoWayDvEntry 1 } acdCfmResultTwoWayDvPeriodIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period." ::= { acdCfmResultTwoWayDvEntry 2 } acdCfmResultTwoWayDvIntervalStart OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This is the time of the start of the period." ::= { acdCfmResultTwoWayDvEntry 3 } acdCfmResultTwoWayDvValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the two-way delay variation results during this sampling interval." ::= { acdCfmResultTwoWayDvEntry 4 } acdCfmResultTwoWayDvAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the presence of the Two Way Delay variation alert." ::= { acdCfmResultTwoWayDvEntry 5 } acdCfmResultTwoWayDvAvgAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the presence of the Two Way Average Delay variation alert." ::= { acdCfmResultTwoWayDvEntry 6 } acdCfmResultTwoWayDvSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate Two-way delay variation results." ::= { acdCfmResultTwoWayDvEntry 7 } acdCfmResultTwoWayDvMinValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the two-way delay variation minimum value. The value is expressed in micro-seconds." ::= { acdCfmResultTwoWayDvEntry 8 } acdCfmResultTwoWayDvMaxValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the two-way delay variation maximum value. The value is expressed in micro-seconds." ::= { acdCfmResultTwoWayDvEntry 9 } acdCfmResultTwoWayDvAvgValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the two-way delay variation average value. The value is expressed in micro-seconds." ::= { acdCfmResultTwoWayDvEntry 10} acdCfmResultTwoWayDvThreshExc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples exceeding the limit." ::= { acdCfmResultTwoWayDvEntry 11 } acdCfmResultTwoWayDvInstValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the two-way delay variation Instantaneous value. The value is expressed in micro-seconds." ::= { acdCfmResultTwoWayDvEntry 12 } --------------------------------------------------------------------------- -- The CFM DMM One Way delay History Results table -- This table contains all CFM DMM One Way delay entry History results. --------------------------------------------------------------------------- acdCfmHistResultOneWayDelayTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdCfmHistResultOneWayDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One way delay result table of all DM entries." ::= { acdCfmDelayMeasurement 6 } acdCfmHistResultOneWayDelayEntry OBJECT-TYPE SYNTAX AcdCfmHistResultOneWayDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of One Way Delay results for a DM entry." INDEX { acdCfmHistResultOneWayDelayID, acdCfmHistResultOneWayDelaySampleIndex } ::= { acdCfmHistResultOneWayDelayTable 1 } AcdCfmHistResultOneWayDelayEntry ::= SEQUENCE { acdCfmHistResultOneWayDelayID Unsigned32, acdCfmHistResultOneWayDelaySampleIndex Unsigned32, acdCfmHistResultOneWayDelayStatus INTEGER, acdCfmHistResultOneWayDelayDuration Unsigned32, acdCfmHistResultOneWayDelayIntervalEnd DateAndTime, acdCfmHistResultOneWayDelaySamples Unsigned32, acdCfmHistResultOneWayDelayMinValue Integer32, acdCfmHistResultOneWayDelayMaxValue Integer32, acdCfmHistResultOneWayDelayAvgValue Integer32, acdCfmHistResultOneWayDelayThreshExc Unsigned32 } acdCfmHistResultOneWayDelayID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each Delay Measurement instance. This value follows the ordering of the Dm table." ::= { acdCfmHistResultOneWayDelayEntry 1 } acdCfmHistResultOneWayDelaySampleIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period." ::= { acdCfmHistResultOneWayDelayEntry 2 } acdCfmHistResultOneWayDelayStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the One-way delay results during this sampling interval." ::= { acdCfmHistResultOneWayDelayEntry 3 } acdCfmHistResultOneWayDelayDuration OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unique value for each Delay Measurement instance. This value follows the ordering of the Dm table." ::= { acdCfmHistResultOneWayDelayEntry 4 } acdCfmHistResultOneWayDelayIntervalEnd OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This is the time of the end of the period." ::= { acdCfmHistResultOneWayDelayEntry 5 } acdCfmHistResultOneWayDelaySamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate One-way delay results." ::= { acdCfmHistResultOneWayDelayEntry 6 } acdCfmHistResultOneWayDelayMinValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the One-way delay minimum value. The value is expressed in micro-seconds." ::= { acdCfmHistResultOneWayDelayEntry 7 } acdCfmHistResultOneWayDelayMaxValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the One-way delay maximum value. The value is expressed in micro-seconds." ::= { acdCfmHistResultOneWayDelayEntry 8 } acdCfmHistResultOneWayDelayAvgValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the One-way delay average value. The value is expressed in micro-seconds." ::= { acdCfmHistResultOneWayDelayEntry 9} acdCfmHistResultOneWayDelayThreshExc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples exceeding the limit." ::= { acdCfmHistResultOneWayDelayEntry 10 } --------------------------------------------------------------------------- -- The CFM DMM One Way delay variation History Results table -- This table contains all CFM DMM One Way delay variation entry History results. --------------------------------------------------------------------------- acdCfmHistResultOneWayDvTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdCfmHistResultOneWayDvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One way delay variation result table of all DM entries." ::= { acdCfmDelayMeasurement 7 } acdCfmHistResultOneWayDvEntry OBJECT-TYPE SYNTAX AcdCfmHistResultOneWayDvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of One Way Delay variation results for a DM entry." INDEX { acdCfmHistResultOneWayDvID, acdCfmHistResultOneWayDvSampleIndex } ::= { acdCfmHistResultOneWayDvTable 1 } AcdCfmHistResultOneWayDvEntry ::= SEQUENCE { acdCfmHistResultOneWayDvID Unsigned32, acdCfmHistResultOneWayDvSampleIndex Unsigned32, acdCfmHistResultOneWayDvStatus INTEGER, acdCfmHistResultOneWayDvDuration Unsigned32, acdCfmHistResultOneWayDvIntervalEnd DateAndTime, acdCfmHistResultOneWayDvSamples Unsigned32, acdCfmHistResultOneWayDvMinValue Integer32, acdCfmHistResultOneWayDvMaxValue Integer32, acdCfmHistResultOneWayDvAvgValue Integer32, acdCfmHistResultOneWayDvThreshExc Unsigned32 } acdCfmHistResultOneWayDvID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each Delay variation Measurement instance. This value follows the ordering of the DM table." ::= { acdCfmHistResultOneWayDvEntry 1 } acdCfmHistResultOneWayDvSampleIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period." ::= { acdCfmHistResultOneWayDvEntry 2 } acdCfmHistResultOneWayDvStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the One-way delay variation results during this sampling interval." ::= { acdCfmHistResultOneWayDvEntry 3 } acdCfmHistResultOneWayDvDuration OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interval in seconds over which the data is sampled for this entry." ::= { acdCfmHistResultOneWayDvEntry 4 } acdCfmHistResultOneWayDvIntervalEnd OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This is the time of the end of the period." ::= { acdCfmHistResultOneWayDvEntry 5 } acdCfmHistResultOneWayDvSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate One-way delay variation results." ::= { acdCfmHistResultOneWayDvEntry 6 } acdCfmHistResultOneWayDvMinValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the One-way delay variation minimum value. The value is expressed in micro-seconds." ::= { acdCfmHistResultOneWayDvEntry 7 } acdCfmHistResultOneWayDvMaxValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the One-way delay variationmaximum value. The value is expressed in micro-seconds." ::= { acdCfmHistResultOneWayDvEntry 8 } acdCfmHistResultOneWayDvAvgValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the One-way delay variation average value. The value is expressed in micro-seconds." ::= { acdCfmHistResultOneWayDvEntry 9 } acdCfmHistResultOneWayDvThreshExc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples exceeding the limit." ::= { acdCfmHistResultOneWayDvEntry 10 } --------------------------------------------------------------------------- -- The CFM DMM Two Way delay History Results table -- This table contains all CFM DMM Two Way delay entry History results. --------------------------------------------------------------------------- acdCfmHistResultTwoWayDelayTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdCfmHistResultTwoWayDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Two way delay result table of all DM entries." ::= { acdCfmDelayMeasurement 8 } acdCfmHistResultTwoWayDelayEntry OBJECT-TYPE SYNTAX AcdCfmHistResultTwoWayDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of Two Way Delay results for a DM entry." INDEX { acdCfmHistResultTwoWayDelayID, acdCfmHistResultTwoWayDelaySampleIndex } ::= { acdCfmHistResultTwoWayDelayTable 1 } AcdCfmHistResultTwoWayDelayEntry ::= SEQUENCE { acdCfmHistResultTwoWayDelayID Unsigned32, acdCfmHistResultTwoWayDelaySampleIndex Unsigned32, acdCfmHistResultTwoWayDelayStatus INTEGER, acdCfmHistResultTwoWayDelayDuration Unsigned32, acdCfmHistResultTwoWayDelayIntervalEnd DateAndTime, acdCfmHistResultTwoWayDelaySamples Unsigned32, acdCfmHistResultTwoWayDelayMinValue Integer32, acdCfmHistResultTwoWayDelayMaxValue Integer32, acdCfmHistResultTwoWayDelayAvgValue Integer32, acdCfmHistResultTwoWayDelayThreshExc Unsigned32 } acdCfmHistResultTwoWayDelayID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each Delay Measurement instance. This value follows the ordering of the Dm table." ::= { acdCfmHistResultTwoWayDelayEntry 1 } acdCfmHistResultTwoWayDelaySampleIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period." ::= { acdCfmHistResultTwoWayDelayEntry 2 } acdCfmHistResultTwoWayDelayStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the Two way delay results during this sampling interval." ::= { acdCfmHistResultTwoWayDelayEntry 3 } acdCfmHistResultTwoWayDelayDuration OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interval in seconds over which the data is sampled for this entry." ::= { acdCfmHistResultTwoWayDelayEntry 4 } acdCfmHistResultTwoWayDelayIntervalEnd OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This is the time of the end of the period." ::= { acdCfmHistResultTwoWayDelayEntry 5 } acdCfmHistResultTwoWayDelaySamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate Two-way delay results." ::= { acdCfmHistResultTwoWayDelayEntry 6 } acdCfmHistResultTwoWayDelayMinValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Two-way delay minimum value. The value is expressed in micro-seconds." ::= { acdCfmHistResultTwoWayDelayEntry 7 } acdCfmHistResultTwoWayDelayMaxValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Two-way delay maximum value. The value is expressed in micro-seconds." ::= { acdCfmHistResultTwoWayDelayEntry 8 } acdCfmHistResultTwoWayDelayAvgValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Two-way delay average value. The value is expressed in micro-seconds." ::= { acdCfmHistResultTwoWayDelayEntry 9 } acdCfmHistResultTwoWayDelayThreshExc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples exceeding the limit." ::= { acdCfmHistResultTwoWayDelayEntry 10 } --------------------------------------------------------------------------- -- The CFM DMM Two Way delay variation History Results table -- This table contains all CFM DMM Two Way delay variation entry History results. --------------------------------------------------------------------------- acdCfmHistResultTwoWayDvTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdCfmHistResultTwoWayDvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Two way delay variation result table of all DM entries." ::= { acdCfmDelayMeasurement 9 } acdCfmHistResultTwoWayDvEntry OBJECT-TYPE SYNTAX AcdCfmHistResultTwoWayDvEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of two Way Delay variation results for a DM entry." INDEX { acdCfmHistResultTwoWayDvID, acdCfmHistResultTwoWayDvSampleIndex } ::= { acdCfmHistResultTwoWayDvTable 1 } AcdCfmHistResultTwoWayDvEntry ::= SEQUENCE { acdCfmHistResultTwoWayDvID Unsigned32, acdCfmHistResultTwoWayDvSampleIndex Unsigned32, acdCfmHistResultTwoWayDvStatus INTEGER, acdCfmHistResultTwoWayDvDuration Unsigned32, acdCfmHistResultTwoWayDvIntervalEnd DateAndTime, acdCfmHistResultTwoWayDvSamples Unsigned32, acdCfmHistResultTwoWayDvMinValue Integer32, acdCfmHistResultTwoWayDvMaxValue Integer32, acdCfmHistResultTwoWayDvAvgValue Integer32, acdCfmHistResultTwoWayDvThreshExc Unsigned32 } acdCfmHistResultTwoWayDvID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each Delay variation Measurement instance. This value follows the ordering of the Dm table." ::= { acdCfmHistResultTwoWayDvEntry 1 } acdCfmHistResultTwoWayDvSampleIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 and increases by one as each new period." ::= { acdCfmHistResultTwoWayDvEntry 2 } acdCfmHistResultTwoWayDvStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the two-way delay variation results during this sampling interval." ::= { acdCfmHistResultTwoWayDvEntry 3 } acdCfmHistResultTwoWayDvDuration OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interval in seconds over which the data is sampled for this entry." ::= { acdCfmHistResultTwoWayDvEntry 4 } acdCfmHistResultTwoWayDvIntervalEnd OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This is the time of the end of the period." ::= { acdCfmHistResultTwoWayDvEntry 5 } acdCfmHistResultTwoWayDvSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate Two-way delay variation results." ::= { acdCfmHistResultTwoWayDvEntry 6 } acdCfmHistResultTwoWayDvMinValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the two-way delay variation minimum value. The value is expressed in micro-seconds." ::= { acdCfmHistResultTwoWayDvEntry 7 } acdCfmHistResultTwoWayDvMaxValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the two-way delay variation maximum value. The value is expressed in micro-seconds." ::= { acdCfmHistResultTwoWayDvEntry 8 } acdCfmHistResultTwoWayDvAvgValue OBJECT-TYPE SYNTAX Integer32 UNITS "microseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the two-way delay variation average value. The value is expressed in micro-seconds." ::= { acdCfmHistResultTwoWayDvEntry 9 } acdCfmHistResultTwoWayDvThreshExc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples exceeding the limit." ::= { acdCfmHistResultTwoWayDvEntry 10 } --------------------------------------------------------------------------- -- The Packet Loss configuration table -- This table contains all Packet Loss entry configurations. --------------------------------------------------------------------------- acdCfmPktLossCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdCfmPktLossCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration table of all Packet Loss entries." ::= { acdCfmPacketLoss 1 } acdCfmPktLossCfgEntry OBJECT-TYPE SYNTAX AcdCfmPktLossCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of all settings to manage a Packet loss instance." INDEX { acdCfmPktLossCfgID } ::= { acdCfmPktLossCfgTable 1 } AcdCfmPktLossCfgEntry ::= SEQUENCE { acdCfmPktLossCfgID Unsigned32, acdCfmPktLossCfgRowStatus RowStatus, acdCfmPktLossCfgMepIdx Unsigned32, acdCfmPktLossCfgRemoteMepId Unsigned32, acdCfmPktLossCfgPriority Unsigned32, acdCfmPktLossCfgEnable TruthValue, acdCfmPktLossCfgInterval Unsigned32, acdCfmPktLossCfgRefPeriod Unsigned32, acdCfmPktLossCfgThresh Unsigned32, acdCfmPktLossCfgRatioThresh Unsigned32 } acdCfmPktLossCfgID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each Packet Loss instance. This value follows the ordering the results table." ::= { acdCfmPktLossCfgEntry 1 } acdCfmPktLossCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated." ::= { acdCfmPktLossCfgEntry 2 } acdCfmPktLossCfgMepIdx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Maintenance association End Point Identifier." ::= { acdCfmPktLossCfgEntry 3 } acdCfmPktLossCfgRemoteMepId OBJECT-TYPE SYNTAX Unsigned32 (1..8191) MAX-ACCESS read-create STATUS current DESCRIPTION "Remote Maintenance association End Point Identifier." ::= { acdCfmPktLossCfgEntry 4 } acdCfmPktLossCfgPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN priority. Its value ranges from 0 to 7. Same has CCM priority for packet loss based on CCM." DEFVAL { 0 } ::= { acdCfmPktLossCfgEntry 5 } acdCfmPktLossCfgEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable CFM to perform Packet Loss measurement." DEFVAL { false } ::= { acdCfmPktLossCfgEntry 6 } acdCfmPktLossCfgInterval OBJECT-TYPE SYNTAX Unsigned32 (1..60000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Interval in milliseconds at which CFM issues Packet Loss measurement packets. Same has CCM interval for packet loss based on CCM." DEFVAL { 10000 } ::= { acdCfmPktLossCfgEntry 7 } acdCfmPktLossCfgRefPeriod OBJECT-TYPE SYNTAX Unsigned32 (1..1440) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "Reference period in minutes for Packet Loss Measurement." DEFVAL { 15 } ::= { acdCfmPktLossCfgEntry 8 } acdCfmPktLossCfgThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of packet loss allowed without issuing an alarm." DEFVAL { 1 } ::= { acdCfmPktLossCfgEntry 9 } acdCfmPktLossCfgRatioThresh OBJECT-TYPE SYNTAX Unsigned32 (0..100000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Packet loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%)." DEFVAL { 0 } ::= { acdCfmPktLossCfgEntry 10 } --------------------------------------------------------------------------- -- The CFM Packet Loss Results table -- This table contains all CFM DMM Packet Loss results. --------------------------------------------------------------------------- acdCfmResultPktLossTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdCfmResultPktLossEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Packet loss result table of a MEP and remote MEP pair." ::= { acdCfmPacketLoss 2 } acdCfmResultPktLossEntry OBJECT-TYPE SYNTAX AcdCfmResultPktLossEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of packet loss result for a specific MEP and remote MEP pair." INDEX { acdCfmResultPktLossID } ::= { acdCfmResultPktLossTable 1 } AcdCfmResultPktLossEntry ::= SEQUENCE { acdCfmResultPktLossID Unsigned32, acdCfmResultPktLossPeriodIndex Unsigned32, acdCfmResultPktLossIntervalStart DateAndTime, acdCfmResultPktLossValid TruthValue, acdCfmResultPktLossAlert TruthValue, acdCfmResultPktLossSamples Counter32, acdCfmResultPktLossOverflowSamples Counter32, acdCfmResultPktLossHCSamples Counter64, acdCfmResultPktLossNbrLoss Counter32, acdCfmResultPktLossOverflowNbrLoss Counter32, acdCfmResultPktLossHCNbrLoss Counter64, acdCfmResultPktLossNbrGaps Counter32, acdCfmResultPktLossOverflowNbrGaps Counter32, acdCfmResultPktLossHCNbrGaps Counter64, acdCfmResultPktLossLargestGap Counter32, acdCfmResultPktLossOverflowLargestGap Counter32, acdCfmResultPktLossHCLargestGap Counter64, acdCfmResultPktLossRatio Unsigned32 } acdCfmResultPktLossID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each Delay variation Measurement instance. This value follows the ordering of the Dm table." ::= { acdCfmResultPktLossEntry 1 } acdCfmResultPktLossPeriodIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies the particular sample this entry represents among all samples associated with the same PL instance. This index starts at 1 and increases by one as each new period." ::= { acdCfmResultPktLossEntry 2 } acdCfmResultPktLossIntervalStart OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This is the time of the start of the period." ::= { acdCfmResultPktLossEntry 3 } acdCfmResultPktLossValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the packet loss results during this sampling interval." ::= { acdCfmResultPktLossEntry 4 } acdCfmResultPktLossAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the presence of the Packet Loss alert." ::= { acdCfmResultPktLossEntry 5 } acdCfmResultPktLossSamples OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate packet loss results." ::= { acdCfmResultPktLossEntry 6 } acdCfmResultPktLossOverflowSamples OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated acdCfmResultPktLossSamples counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmResultPktLossSamples, it provides the equivalent of the 64 bits counter acdCfmResultPktLossHCSamples." ::= { acdCfmResultPktLossEntry 7 } acdCfmResultPktLossHCSamples OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate packet loss results." ::= { acdCfmResultPktLossEntry 8 } acdCfmResultPktLossNbrLoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of packet loss." ::= { acdCfmResultPktLossEntry 9 } acdCfmResultPktLossOverflowNbrLoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated acdCfmResultPktLossNbrLoss counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmResultPktLossNbrLoss, it provides the equivalent of the 64 bits counter acdCfmResultPktLossHCNbrLoss." ::= { acdCfmResultPktLossEntry 10 } acdCfmResultPktLossHCNbrLoss OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of packet loss." ::= { acdCfmResultPktLossEntry 11 } acdCfmResultPktLossNbrGaps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of gap." ::= { acdCfmResultPktLossEntry 12 } acdCfmResultPktLossOverflowNbrGaps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated acdCfmResultPktLossNbrGaps counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmResultPktLossNbrGaps, it provides the equivalent of the 64 bits counter acdCfmResultPktLossHCNbrGaps." ::= { acdCfmResultPktLossEntry 13 } acdCfmResultPktLossHCNbrGaps OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of gap." ::= { acdCfmResultPktLossEntry 14 } acdCfmResultPktLossLargestGap OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "the largest gap size in packets." ::= { acdCfmResultPktLossEntry 15 } acdCfmResultPktLossOverflowLargestGap OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated acdCfmResultPktLossLargestGap counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmResultPktLossLargestGap, it provides the equivalent of the 64 bits counter acdCfmResultPktLossHCLargestGap." ::= { acdCfmResultPktLossEntry 16 } acdCfmResultPktLossHCLargestGap OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "the largest gap size in packets." ::= { acdCfmResultPktLossEntry 17 } acdCfmResultPktLossRatio OBJECT-TYPE SYNTAX Unsigned32 (0..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the packet loss ratio. The packet loss ratio is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%)." ::= { acdCfmResultPktLossEntry 18 } --------------------------------------------------------------------------- -- The CFM Packet Loss History Results table -- This table contains all CFM Packet Loss History results. --------------------------------------------------------------------------- acdCfmHistResultPktLossTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdCfmHistResultPktLossEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Packet loss history result table of a MEP and remote MEP pair." ::= { acdCfmPacketLoss 3 } acdCfmHistResultPktLossEntry OBJECT-TYPE SYNTAX AcdCfmHistResultPktLossEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of Packet loss history result for a specific MEP and remote MEP pair." INDEX { acdCfmHistResultPktLossID, acdCfmHistResultPktLossSampleIndex } ::= { acdCfmHistResultPktLossTable 1 } AcdCfmHistResultPktLossEntry ::= SEQUENCE { acdCfmHistResultPktLossID Unsigned32, acdCfmHistResultPktLossSampleIndex Unsigned32, acdCfmHistResultPktLossStatus INTEGER, acdCfmHistResultPktLossDuration Unsigned32, acdCfmHistResultPktLossIntervalEnd DateAndTime, acdCfmHistResultPktLossSamples Counter32, acdCfmHistResultPktLossOverflowSamples Counter32, acdCfmHistResultPktLossHCSamples Counter64, acdCfmHistResultPktLossNbrLoss Counter32, acdCfmHistResultPktLossOverflowNbrLoss Counter32, acdCfmHistResultPktLossHCNbrLoss Counter64, acdCfmHistResultPktLossNbrGaps Counter32, acdCfmHistResultPktLossOverflowNbrGaps Counter32, acdCfmHistResultPktLossHCNbrGaps Counter64, acdCfmHistResultPktLossLargestGap Counter32, acdCfmHistResultPktLossOverflowLargestGap Counter32, acdCfmHistResultPktLossHCLargestGap Counter64, acdCfmHistResultPktLossRatio Unsigned32 } acdCfmHistResultPktLossID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each Delay variation Measurement instance. This value follows the ordering of the Dm table." ::= { acdCfmHistResultPktLossEntry 1 } acdCfmHistResultPktLossSampleIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies the particular sample this entry represents among all samples associated with the same PL instance. This index starts at 1 and increases by one as each new period." ::= { acdCfmHistResultPktLossEntry 2 } acdCfmHistResultPktLossStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the packet loss results during this sampling interval." ::= { acdCfmHistResultPktLossEntry 3 } acdCfmHistResultPktLossDuration OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interval in seconds over which the data is sampled for this entry." ::= { acdCfmHistResultPktLossEntry 4 } acdCfmHistResultPktLossIntervalEnd OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This is the time of the end of this entry." ::= { acdCfmHistResultPktLossEntry 5 } acdCfmHistResultPktLossSamples OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate packet loss results. This is a 32 bits counter. Combined with the overflow counter it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCSamples." ::= { acdCfmHistResultPktLossEntry 6 } acdCfmHistResultPktLossOverflowSamples OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated acdCfmHistResultPktLossSamples counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmHistResultPktLossSamples, it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCSamples." ::= { acdCfmHistResultPktLossEntry 7 } acdCfmHistResultPktLossHCSamples OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate packet loss results." ::= { acdCfmHistResultPktLossEntry 8 } acdCfmHistResultPktLossNbrLoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets loss during this sampling interval. This is a 32 bits counter. Combined with the overflow counter it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCNbrLoss." ::= { acdCfmHistResultPktLossEntry 9 } acdCfmHistResultPktLossOverflowNbrLoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated acdCfmHistResultPktLossNbrLoss counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmHistResultPktLossNbrLoss, it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCNbrLoss." ::= { acdCfmHistResultPktLossEntry 10 } acdCfmHistResultPktLossHCNbrLoss OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets loss during this sampling interval." ::= { acdCfmHistResultPktLossEntry 11 } acdCfmHistResultPktLossNbrGaps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of gap during this sampling interval. This is a 32 bits counter. Combined with the overflow counter it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCNbrGaps." ::= { acdCfmHistResultPktLossEntry 12 } acdCfmHistResultPktLossOverflowNbrGaps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated acdCfmHistResultPktLossNbrGaps counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmHistResultPktLossNbrGaps, it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCNbrGaps." ::= { acdCfmHistResultPktLossEntry 13 } acdCfmHistResultPktLossHCNbrGaps OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of gap during this sampling interval." ::= { acdCfmHistResultPktLossEntry 14 } acdCfmHistResultPktLossLargestGap OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "the largest gap size in packets during this sampling interval. This is a 32 bits counter. Combined with the overflow counter it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCNbrGaps." ::= { acdCfmHistResultPktLossEntry 15 } acdCfmHistResultPktLossOverflowLargestGap OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated acdCfmHistResultPktLossLargestGap counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with acdCfmHistResultPktLossLargestGap, it provides the equivalent of the 64 bits counter acdCfmHistResultPktLossHCLargestGap." ::= { acdCfmHistResultPktLossEntry 16 } acdCfmHistResultPktLossHCLargestGap OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "the largest gap size in packets during this sampling interval." ::= { acdCfmHistResultPktLossEntry 17 } acdCfmHistResultPktLossRatio OBJECT-TYPE SYNTAX Unsigned32 (0..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the packet loss ratio. The packet loss ratio is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%)." ::= { acdCfmHistResultPktLossEntry 18 } --------------------------------------------------------------------------- -- The SLM configuration table -- This table contains all SLM entry configurations. --------------------------------------------------------------------------- acdCfmSlmCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdCfmSlmCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration table of all SLM entries." ::= { acdCfmSlm 1 } acdCfmSlmCfgEntry OBJECT-TYPE SYNTAX AcdCfmSlmCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of all settings to manage a SLM instance." INDEX { acdCfmSlmCfgID } ::= { acdCfmSlmCfgTable 1 } AcdCfmSlmCfgEntry ::= SEQUENCE { acdCfmSlmCfgID Unsigned32, acdCfmSlmCfgRowStatus RowStatus, acdCfmSlmCfgMepIdx Unsigned32, acdCfmSlmCfgRemoteMepId Unsigned32, acdCfmSlmCfgPriority Unsigned32, acdCfmSlmCfgState TruthValue, acdCfmSlmCfgInterval Unsigned32, acdCfmSlmCfgRefPeriod Unsigned32, acdCfmSlmCfgNearEndThresh Unsigned32, acdCfmSlmCfgFarEndThresh Unsigned32, acdCfmSlmCfgName DisplayString } acdCfmSlmCfgID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each SLM instance. This value follows the ordering the results table." ::= { acdCfmSlmCfgEntry 1 } acdCfmSlmCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated." ::= { acdCfmSlmCfgEntry 2 } acdCfmSlmCfgMepIdx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maintenance association End Point Identifier." ::= { acdCfmSlmCfgEntry 3 } acdCfmSlmCfgRemoteMepId OBJECT-TYPE SYNTAX Unsigned32 (1..8191) MAX-ACCESS read-only STATUS current DESCRIPTION "Remote Maintenance association End Point Identifier." ::= { acdCfmSlmCfgEntry 4 } acdCfmSlmCfgPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN priority. Its value ranges from 0 to 7." DEFVAL { 0 } ::= { acdCfmSlmCfgEntry 5 } acdCfmSlmCfgState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "State of the SLM instance" DEFVAL { false } ::= { acdCfmSlmCfgEntry 6 } acdCfmSlmCfgInterval OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Interval in milliseconds at which CFM issues Synthetic Loss Measurement packets." DEFVAL { 1000 } ::= { acdCfmSlmCfgEntry 7 } acdCfmSlmCfgRefPeriod OBJECT-TYPE SYNTAX Unsigned32 (1..1440) UNITS "minutes" MAX-ACCESS read-only STATUS current DESCRIPTION "Reference period in minutes for Synthetic Loss Measurement." DEFVAL { 15 } ::= { acdCfmSlmCfgEntry 8 } acdCfmSlmCfgNearEndThresh OBJECT-TYPE SYNTAX Unsigned32 (0..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Near end packet loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%)." DEFVAL { 1 } ::= { acdCfmSlmCfgEntry 9 } acdCfmSlmCfgFarEndThresh OBJECT-TYPE SYNTAX Unsigned32 (0..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Far end packet loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%)." DEFVAL { 0 } ::= { acdCfmSlmCfgEntry 10 } acdCfmSlmCfgName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the instance" DEFVAL { "new" } ::= { acdCfmSlmCfgEntry 11 } --------------------------------------------------------------------------- -- The SLM Results table -- This table contains all SLM results. --------------------------------------------------------------------------- acdCfmSlmResultTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdCfmSlmResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SLM result table of a MEP and remote MEP pair." ::= { acdCfmSlm 2 } acdCfmSlmResultEntry OBJECT-TYPE SYNTAX AcdCfmSlmResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of SLM result for a specific MEP and remote MEP pair." INDEX { acdCfmSlmResultID } ::= { acdCfmSlmResultTable 1 } AcdCfmSlmResultEntry ::= SEQUENCE { acdCfmSlmResultID Unsigned32, acdCfmSlmResultPeriodIndex Unsigned32, acdCfmSlmResultIntervalStart DateAndTime, acdCfmSlmResultValid TruthValue, acdCfmSlmResultNearEndAlert TruthValue, acdCfmSlmResultFarEndAlert TruthValue, acdCfmSlmResultTxSlm Counter32, acdCfmSlmResultRxSlr Counter32, acdCfmSlmResultRemoteRxSlm Counter32, acdCfmSlmResultNearEndNbrLoss Counter32, acdCfmSlmResultFarEndNbrLoss Counter32, acdCfmSlmResultNearEndRatio Gauge32, acdCfmSlmResultFarEndRatio Gauge32, acdCfmSlmResultNbrGaps Counter32, acdCfmSlmResultLargestGap Counter32 } acdCfmSlmResultID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each SLM instance. This value follows the ordering of the SLM table." ::= { acdCfmSlmResultEntry 1 } acdCfmSlmResultPeriodIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies the particular sample this entry represents among all samples associated with the same PL instance. This index starts at 1 and increases by one as each new period." ::= { acdCfmSlmResultEntry 2 } acdCfmSlmResultIntervalStart OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This is the time of the start of the period." ::= { acdCfmSlmResultEntry 3 } acdCfmSlmResultValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Reserved for future use." ::= { acdCfmSlmResultEntry 4 } acdCfmSlmResultNearEndAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the presence of the SLM near end alert." ::= { acdCfmSlmResultEntry 5 } acdCfmSlmResultFarEndAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the presence of the SLM far end alert." ::= { acdCfmSlmResultEntry 6 } acdCfmSlmResultTxSlm OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of SLM frames sent." ::= { acdCfmSlmResultEntry 7 } acdCfmSlmResultRxSlr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of SLR frames received." ::= { acdCfmSlmResultEntry 8 } acdCfmSlmResultRemoteRxSlm OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of SLM frames received at the far end." ::= { acdCfmSlmResultEntry 9 } acdCfmSlmResultNearEndNbrLoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of packets lost at the near end." ::= { acdCfmSlmResultEntry 10 } acdCfmSlmResultFarEndNbrLoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of packets lost at the far end." ::= { acdCfmSlmResultEntry 11 } acdCfmSlmResultNearEndRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the packet loss ratio at the near end." ::= { acdCfmSlmResultEntry 12 } acdCfmSlmResultFarEndRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the packet loss ratio at the far end." ::= { acdCfmSlmResultEntry 13 } acdCfmSlmResultNbrGaps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of gap." ::= { acdCfmSlmResultEntry 14 } acdCfmSlmResultLargestGap OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the largest gap." ::= { acdCfmSlmResultEntry 15 } --------------------------------------------------------------------------- -- The SLM History Results table -- This table contains all CFM Packet Loss History results. --------------------------------------------------------------------------- acdCfmSlmHistResultTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdCfmSlmHistResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SLM history result table of a MEP and remote MEP pair." ::= { acdCfmSlm 3 } acdCfmSlmHistResultEntry OBJECT-TYPE SYNTAX AcdCfmSlmHistResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of SLM history result for a specific MEP and remote MEP pair." INDEX { acdCfmSlmHistResultInstanceIndex, acdCfmSlmHistResultID } ::= { acdCfmSlmHistResultTable 1 } AcdCfmSlmHistResultEntry ::= SEQUENCE { acdCfmSlmHistResultID Unsigned32, acdCfmSlmHistResultPeriodIndex Unsigned32, acdCfmSlmHistResultIntervalEnd DateAndTime, acdCfmSlmHistResultTxSlm Counter32, acdCfmSlmHistResultRxSlr Counter32, acdCfmSlmHistResultRemoteRxSlm Counter32, acdCfmSlmHistResultNearEndRatio Gauge32, acdCfmSlmHistResultFarEndRatio Gauge32, acdCfmSlmHistResultNbrGaps Counter32, acdCfmSlmHistResultLargestGap Counter32, acdCfmSlmHistResultInstanceIndex Unsigned32 } acdCfmSlmHistResultID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each SLM instance. This value follows the ordering of the SLM table." ::= { acdCfmSlmHistResultEntry 1 } acdCfmSlmHistResultPeriodIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies the particular sample this entry represents among all samples associated with the same PL instance. This index starts at 1 and increases by one as each new period." ::= { acdCfmSlmHistResultEntry 2 } acdCfmSlmHistResultIntervalEnd OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This is the time of the end of the period." ::= { acdCfmSlmHistResultEntry 3 } acdCfmSlmHistResultTxSlm OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of SLM frames sent." ::= { acdCfmSlmHistResultEntry 4 } acdCfmSlmHistResultRxSlr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of SLR frames received." ::= { acdCfmSlmHistResultEntry 5 } acdCfmSlmHistResultRemoteRxSlm OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of SLM frames received at the far end." ::= { acdCfmSlmHistResultEntry 6 } acdCfmSlmHistResultNearEndRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the packet loss ratio at the near end." ::= { acdCfmSlmHistResultEntry 7 } acdCfmSlmHistResultFarEndRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the packet loss ratio at the far end." ::= { acdCfmSlmHistResultEntry 8 } acdCfmSlmHistResultNbrGaps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of gap." ::= { acdCfmSlmHistResultEntry 9 } acdCfmSlmHistResultLargestGap OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the largest gap." ::= { acdCfmSlmHistResultEntry 10 } acdCfmSlmHistResultInstanceIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The instance index." ::= { acdCfmSlmHistResultEntry 11 } --------------------------------------------------------------------------- -- The MEP Transmit Statistics table -- This table contains all transmit statistics related to all MEP entries. --------------------------------------------------------------------------- acdCfmMepStatsTxTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdCfmMepStatsTxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Transmit Statictics table of all MEP entries." ::= { acdCfmMep 2 } acdCfmMepStatsTxEntry OBJECT-TYPE SYNTAX AcdCfmMepStatsTxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of all transmit statistics related to a MEP entry." INDEX { acdCfmMepStatsTxID } ::= { acdCfmMepStatsTxTable 1 } AcdCfmMepStatsTxEntry ::= SEQUENCE { acdCfmMepStatsTxID Unsigned32, acdCfmMepStatsTxCcmPdu Counter64, acdCfmMepStatsTxLbmPdu Counter64, acdCfmMepStatsTxLbrPdu Counter64, acdCfmMepStatsTxLtmPdu Counter64, acdCfmMepStatsTxLtrPdu Counter64, acdCfmMepStatsTxAisPdu Counter64, acdCfmMepStatsTxLckPdu Counter64, acdCfmMepStatsTxTstPdu Counter64, acdCfmMepStatsTxLinearApsPdu Counter64, acdCfmMepStatsTxRingApsPdu Counter64, acdCfmMepStatsTxMccPdu Counter64, acdCfmMepStatsTxLmmPdu Counter64, acdCfmMepStatsTxLmrPdu Counter64, acdCfmMepStatsTx1dmPdu Counter64, acdCfmMepStatsTxDmmPdu Counter64, acdCfmMepStatsTxDmrPdu Counter64, acdCfmMepStatsTxExmPdu Counter64, acdCfmMepStatsTxExrPdu Counter64, acdCfmMepStatsTxVsmPdu Counter64, acdCfmMepStatsTxVsrPdu Counter64, acdCfmMepStatsTxCsfPdu Counter64, acdCfmMepStatsTxSlmPdu Counter64, acdCfmMepStatsTxSlrPdu Counter64 } acdCfmMepStatsTxID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each MEP instance. This value follows the ordering of the MEP table." ::= { acdCfmMepStatsTxEntry 1 } acdCfmMepStatsTxCcmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Continuity Check Message (CCM) PDU transmitted by the MEP (OpCode 1)." ::= { acdCfmMepStatsTxEntry 2 } acdCfmMepStatsTxLbmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of LoopBack Message (LBM) PDU transmitted by the MEP (OpCode 3)." ::= { acdCfmMepStatsTxEntry 3 } acdCfmMepStatsTxLbrPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of LoopBack Reply (LBR) PDU transmitted by the MEP (OpCode 2)." ::= { acdCfmMepStatsTxEntry 4 } acdCfmMepStatsTxLtmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Link Trace Message (LTM) PDU transmitted by the MEP (OpCode 5)." ::= { acdCfmMepStatsTxEntry 5 } acdCfmMepStatsTxLtrPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Link Trace Reply (LTR) PDU transmitted by the MEP (OpCode 4)." ::= { acdCfmMepStatsTxEntry 6 } acdCfmMepStatsTxAisPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Alarm Indication Signal (AIS) PDU transmitted by the MEP (OpCode 33)." ::= { acdCfmMepStatsTxEntry 7 } acdCfmMepStatsTxLckPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Locked (LCK) PDU transmitted by the MEP (OpCode 35)." ::= { acdCfmMepStatsTxEntry 8 } acdCfmMepStatsTxTstPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Test (TST) PDU transmitted by the MEP (OpCode 37)." ::= { acdCfmMepStatsTxEntry 9 } acdCfmMepStatsTxLinearApsPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of linear Automatic Protection Switching (APS) PDU transmitted by the MEP (OpCode 39)." ::= { acdCfmMepStatsTxEntry 10 } acdCfmMepStatsTxRingApsPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of ring Automatic Protection Switching (APS) PDU transmitted by the MEP (OpCode 40)." ::= { acdCfmMepStatsTxEntry 11 } acdCfmMepStatsTxMccPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Maintenance Communication Channel (MCC) PDU transmitted by the MEP (OpCode 41)." ::= { acdCfmMepStatsTxEntry 12 } acdCfmMepStatsTxLmmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Loss Measurement Message (LMM) PDU transmitted by the MEP (OpCode 43)." ::= { acdCfmMepStatsTxEntry 13 } acdCfmMepStatsTxLmrPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Loss Measurement Reply (LMR) PDU transmitted by the MEP (OpCode 42)." ::= { acdCfmMepStatsTxEntry 14 } acdCfmMepStatsTx1dmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of One-way Delay Measurement (1DM) PDU transmitted by the MEP (OpCode 45)." ::= { acdCfmMepStatsTxEntry 15 } acdCfmMepStatsTxDmmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Delay Measurement Message (DMM) PDU transmitted by the MEP (OpCode 47)." ::= { acdCfmMepStatsTxEntry 16 } acdCfmMepStatsTxDmrPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Delay Measurement Reply (DMR) PDU transmitted by the MEP (OpCode 46)." ::= { acdCfmMepStatsTxEntry 17 } acdCfmMepStatsTxExmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of EXperimental Message (EXM) PDU transmitted by the MEP (OpCode 49)." ::= { acdCfmMepStatsTxEntry 18 } acdCfmMepStatsTxExrPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of EXperimental Reply (EXR) PDU transmitted by the MEP (OpCode 48)." ::= { acdCfmMepStatsTxEntry 19 } acdCfmMepStatsTxVsmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Vendor Specific Message (VSM) PDU transmitted by the MEP (OpCode 51)." ::= { acdCfmMepStatsTxEntry 20 } acdCfmMepStatsTxVsrPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Vendor Specific Reply (VSR) PDU transmitted by the MEP (OpCode 50)." ::= { acdCfmMepStatsTxEntry 21 } acdCfmMepStatsTxCsfPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Client Signal Fail (CSF) PDU transmitted by the MEP (OpCode 52)." ::= { acdCfmMepStatsTxEntry 22 } acdCfmMepStatsTxSlmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Synthetic Loss Message (SLM) PDU transmitted by the MEP (OpCode 55)." ::= { acdCfmMepStatsTxEntry 23 } acdCfmMepStatsTxSlrPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Synthetic Loss Reply (SLR) PDU transmitted by the MEP (OpCode 54)." ::= { acdCfmMepStatsTxEntry 24 } --------------------------------------------------------------------------- -- The MEP Receive Statistics table -- This table contains all receive statistics related to all MEP entries. --------------------------------------------------------------------------- acdCfmMepStatsRxTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdCfmMepStatsRxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Receive Statictics table of all MEP entries." ::= { acdCfmMep 3 } acdCfmMepStatsRxEntry OBJECT-TYPE SYNTAX AcdCfmMepStatsRxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of all receive statistics related to a MEP entry." INDEX { acdCfmMepStatsRxID } ::= { acdCfmMepStatsRxTable 1 } AcdCfmMepStatsRxEntry ::= SEQUENCE { acdCfmMepStatsRxID Unsigned32, acdCfmMepStatsRxCcmPdu Counter64, acdCfmMepStatsRxLbmPdu Counter64, acdCfmMepStatsRxLbrPdu Counter64, acdCfmMepStatsRxLtmPdu Counter64, acdCfmMepStatsRxLtrPdu Counter64, acdCfmMepStatsRxAisPdu Counter64, acdCfmMepStatsRxLckPdu Counter64, acdCfmMepStatsRxTstPdu Counter64, acdCfmMepStatsRxLinearApsPdu Counter64, acdCfmMepStatsRxRingApsPdu Counter64, acdCfmMepStatsRxMccPdu Counter64, acdCfmMepStatsRxLmmPdu Counter64, acdCfmMepStatsRxLmrPdu Counter64, acdCfmMepStatsRx1dmPdu Counter64, acdCfmMepStatsRxDmmPdu Counter64, acdCfmMepStatsRxDmrPdu Counter64, acdCfmMepStatsRxExmPdu Counter64, acdCfmMepStatsRxExrPdu Counter64, acdCfmMepStatsRxVsmPdu Counter64, acdCfmMepStatsRxVsrPdu Counter64, acdCfmMepStatsRxCcmSeqErrors Counter64, acdCfmMepStatsRxLtrUnexpectedPdu Counter64, acdCfmMepStatsRxLtrMacErrors Counter64, acdCfmMepStatsRxLbrOooErrors Counter64, acdCfmMepStatsRxLbrUnexpectedPdu Counter64, acdCfmMepStatsRxLbrDataErrors Counter64, acdCfmMepStatsRxCsfPdu Counter64, acdCfmMepStatsRxSlmPdu Counter64, acdCfmMepStatsRxSlrPdu Counter64 } acdCfmMepStatsRxID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "." ::= { acdCfmMepStatsRxEntry 1 } acdCfmMepStatsRxCcmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Continuity Check Message (CCM) PDU received by the MEP (OpCode 1)." ::= { acdCfmMepStatsRxEntry 2 } acdCfmMepStatsRxLbmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of LoopBack Message (LBM) PDU received by the MEP (OpCode 3)." ::= { acdCfmMepStatsRxEntry 3 } acdCfmMepStatsRxLbrPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of LoopBack Reply (LBR) PDU received by the MEP (OpCode 2)." ::= { acdCfmMepStatsRxEntry 4 } acdCfmMepStatsRxLtmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Link Trace Message (LTM) PDU received by the MEP (OpCode 5)." ::= { acdCfmMepStatsRxEntry 5 } acdCfmMepStatsRxLtrPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Link Trace Reply (LTR) PDU received by the MEP (OpCode 4)." ::= { acdCfmMepStatsRxEntry 6 } acdCfmMepStatsRxAisPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Alarm Indication Signal (AIS) PDU received by the MEP (OpCode 33)." ::= { acdCfmMepStatsRxEntry 7 } acdCfmMepStatsRxLckPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Locked (LCK) PDU received by the MEP (OpCode 35)." ::= { acdCfmMepStatsRxEntry 8 } acdCfmMepStatsRxTstPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Test (TST) PDU received by the MEP (OpCode 37)." ::= { acdCfmMepStatsRxEntry 9 } acdCfmMepStatsRxLinearApsPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of linear Automatic Protection Switching (APS) PDU received by the MEP (OpCode 39)." ::= { acdCfmMepStatsRxEntry 10 } acdCfmMepStatsRxRingApsPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of ring Automatic Protection Switching (APS) PDU received by the MEP (OpCode 40)." ::= { acdCfmMepStatsRxEntry 11 } acdCfmMepStatsRxMccPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Maintenance Communication Channel (MCC) PDU received by the MEP (OpCode 41)." ::= { acdCfmMepStatsRxEntry 12 } acdCfmMepStatsRxLmmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Loss Measurement Message (LMM) PDU received by the MEP (OpCode 43)." ::= { acdCfmMepStatsRxEntry 13 } acdCfmMepStatsRxLmrPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Loss Measurement Reply (LMR) PDU received by the MEP (OpCode 42)." ::= { acdCfmMepStatsRxEntry 14 } acdCfmMepStatsRx1dmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of One-way Delay Measurement (1DM) PDU received by the MEP (OpCode 45)." ::= { acdCfmMepStatsRxEntry 15 } acdCfmMepStatsRxDmmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Delay Measurement Message (DMM) PDU received by the MEP (OpCode 47)." ::= { acdCfmMepStatsRxEntry 16 } acdCfmMepStatsRxDmrPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Delay Measurement Reply (DMR) PDU received by the MEP (OpCode 46)." ::= { acdCfmMepStatsRxEntry 17 } acdCfmMepStatsRxExmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of EXperimental Message (EXM) PDU received by the MEP (OpCode 49)." ::= { acdCfmMepStatsRxEntry 18 } acdCfmMepStatsRxExrPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of EXperimental Reply (EXR) PDU received by the MEP (OpCode 48)." ::= { acdCfmMepStatsRxEntry 19 } acdCfmMepStatsRxVsmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Vendor Specific Message (VSM) PDU received by the MEP (OpCode 51)." ::= { acdCfmMepStatsRxEntry 20 } acdCfmMepStatsRxVsrPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Vendor Specific Reply (VSR) PDU received by the MEP (OpCode 50)." ::= { acdCfmMepStatsRxEntry 21 } acdCfmMepStatsRxCcmSeqErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of out-of-sequence CCMs received from all remote MEPs." ::= { acdCfmMepStatsRxEntry 22 } acdCfmMepStatsRxLtrUnexpectedPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of LTRs received when no linktrace request is active for that MEP." ::= { acdCfmMepStatsRxEntry 23 } acdCfmMepStatsRxLtrMacErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link Trace Replies dropped because of bad MAC address." ::= { acdCfmMepStatsRxEntry 24 } acdCfmMepStatsRxLbrOooErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of valid, out-of-order Loopback Replies received." ::= { acdCfmMepStatsRxEntry 25 } acdCfmMepStatsRxLbrUnexpectedPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of LBRs received when no loopback request is active for that MEP." ::= { acdCfmMepStatsRxEntry 26 } acdCfmMepStatsRxLbrDataErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of LBRs received whose MACService Data Unit did not match (except for the OpCode) that of the corresponding LBM." ::= { acdCfmMepStatsRxEntry 27 } acdCfmMepStatsRxCsfPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Client Signal Fail (CSF) PDU received by the MEP (OpCode 52)." ::= { acdCfmMepStatsRxEntry 28 } acdCfmMepStatsRxSlmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Synthetic Loss Message (SLM) PDU received by the MEP (OpCode 55)." ::= { acdCfmMepStatsRxEntry 29 } acdCfmMepStatsRxSlrPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Synthetic Loss Reply (SLR) PDU received by the MEP (OpCode 54)." ::= { acdCfmMepStatsRxEntry 30 } --------------------------------------------------------------------------- -- The DMM/DMR Statistics table -- This table contains all DMM/DMR statistics related to a MEP entry. --------------------------------------------------------------------------- acdCfmMepDmStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdCfmMepDmStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Transmit DMM/DMR statictics per priority table for a MEP entry." ::= { acdCfmMep 4 } acdCfmMepDmStatsEntry OBJECT-TYPE SYNTAX AcdCfmMepDmStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of all DMM/DMR statistics related to a MEP entry." INDEX { acdCfmMepDmStatsID, acdCfmMepDmStatsPriority } ::= { acdCfmMepDmStatsTable 1 } AcdCfmMepDmStatsEntry ::= SEQUENCE { acdCfmMepDmStatsID Unsigned32, acdCfmMepDmStatsPriority Unsigned32, acdCfmMepDmStatsTxDmmPdu Counter64, acdCfmMepDmStatsRxDmmPdu Counter64, acdCfmMepDmStatsTxDmrPdu Counter64, acdCfmMepDmStatsRxDmrPdu Counter64 } acdCfmMepDmStatsID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each MEP instance. This value follows the ordering of the MEP table. Same as acdCfmMepStatsTxID and acdCfmMepStatsRxID." ::= { acdCfmMepDmStatsEntry 1 } acdCfmMepDmStatsPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each priority level." ::= { acdCfmMepDmStatsEntry 2 } acdCfmMepDmStatsTxDmmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Delay Measurement Message (DMM) (OpCode 47) PDU transmitted by the MEP for this specific priority level." ::= { acdCfmMepDmStatsEntry 3 } acdCfmMepDmStatsRxDmmPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Delay Measurement Message (DMM) (OpCode 47) PDU received by the MEP for this specific priority level." ::= { acdCfmMepDmStatsEntry 4 } acdCfmMepDmStatsTxDmrPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Delay Measurement Reply (DMR) (OpCode 46) PDU transmitted by the MEP for this specific priority level." ::= { acdCfmMepDmStatsEntry 5 } acdCfmMepDmStatsRxDmrPdu OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of Delay Measurement Reply (DMR) (OpCode 46) PDU received by the MEP for this specific priority level." ::= { acdCfmMepDmStatsEntry 6 } --------------------------------------------------------------------------- -- The Configuration manager Stack Table... -- This table ties some information together --------------------------------------------------------------------------- acdCfmStackTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdCfmStackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration table of stack entries." ::= { acdCfmStack 1 } acdCfmStackEntry OBJECT-TYPE SYNTAX AcdCfmStackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of all informations to tie together." INDEX { acdCfmMdIdx, acdCfmMaIdx, acdCfmMepID} ::= { acdCfmStackTable 1 } AcdCfmStackEntry ::= SEQUENCE { acdCfmMdIdx Unsigned32, acdCfmMaIdx Unsigned32, acdCfmMepID Unsigned32, acdCfmMepIdx Unsigned32 } acdCfmMdIdx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Maintenance Domain(MD) index from table dot1agCfmMepTable in IEEE8021-CFM-MIB." ::= { acdCfmStackEntry 1 } acdCfmMaIdx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Maintenance Association(MA) index from table dot1agCfmMepTable in IEEE8021-CFM-MIB." ::= { acdCfmStackEntry 2 } acdCfmMepID OBJECT-TYPE SYNTAX Unsigned32 (1..8191) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Maintenance End Point(Mep) index from table dot1agCfmMepTable in IEEE8021-CFM-MIB." ::= { acdCfmStackEntry 3 } acdCfmMepIdx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maintenance End Point(Mep) index from table acdCfmDmCfgTable in ACD-CFM-MIB." ::= { acdCfmStackEntry 4 } -------------------------------------------------------------------------- -- ACD-CFM-MIB Module - Conformance Information --------------------------------------------------------------------------- acdCfmCompliances OBJECT IDENTIFIER ::= { acdCfmConformance 1 } acdCfmGroups OBJECT IDENTIFIER ::= { acdCfmConformance 2 } --------------------------------------------------------------------------- -- Units of conformance --------------------------------------------------------------------------- acdCfmDmCfgGroup OBJECT-GROUP OBJECTS { acdCfmDmCfgRowStatus, acdCfmDmCfgMepIdx, acdCfmDmCfgRemoteMepId, acdCfmDmCfgPriority, acdCfmDmCfgEnable, acdCfmDmCfgInterval, acdCfmDmCfgRefPeriod, acdCfmDmCfgOneWayDelayEnable, acdCfmDmCfgOneWayDelayMax, acdCfmDmCfgOneWayDelayThresh, acdCfmDmCfgOneWayAvgDelayThresh, acdCfmDmCfgOneWayDvEnable, acdCfmDmCfgOneWayDvMax, acdCfmDmCfgOneWayDvThresh, acdCfmDmCfgOneWayAvgDvThresh, acdCfmDmCfgTwoWayDelayEnable, acdCfmDmCfgTwoWayDelayMax, acdCfmDmCfgTwoWayDelayThresh, acdCfmDmCfgTwoWayAvgDelayThresh, acdCfmDmCfgTwoWayDvEnable, acdCfmDmCfgTwoWayDvMax, acdCfmDmCfgTwoWayDvThresh, acdCfmDmCfgTwoWayAvgDvThresh } STATUS current DESCRIPTION "Objects for the Delay Measurement configuration Group." ::= { acdCfmGroups 1 } acdCfmResultOneWayDelayGroup OBJECT-GROUP OBJECTS { acdCfmResultOneWayDelayPeriodIndex, acdCfmResultOneWayDelayIntervalStart, acdCfmResultOneWayDelayValid, acdCfmResultOneWayDelayAlert, acdCfmResultOneWayDelayAvgAlert, acdCfmResultOneWayDelaySamples, acdCfmResultOneWayDelayMinValue, acdCfmResultOneWayDelayMaxValue, acdCfmResultOneWayDelayAvgValue, acdCfmResultOneWayDelayThreshExc, acdCfmResultOneWayDelayInstValue } STATUS current DESCRIPTION "Objects for the One Way Delay result Group." ::= { acdCfmGroups 2 } acdCfmResultOneWayDvGroup OBJECT-GROUP OBJECTS { acdCfmResultOneWayDvPeriodIndex, acdCfmResultOneWayDvIntervalStart, acdCfmResultOneWayDvValid, acdCfmResultOneWayDvAlert, acdCfmResultOneWayDvAvgAlert, acdCfmResultOneWayDvSamples, acdCfmResultOneWayDvMinValue, acdCfmResultOneWayDvMaxValue, acdCfmResultOneWayDvAvgValue, acdCfmResultOneWayDvThreshExc, acdCfmResultOneWayDvInstValue } STATUS current DESCRIPTION "Objects for the One Way Delay variation result Group." ::= { acdCfmGroups 3 } acdCfmResultTwoWayDelayGroup OBJECT-GROUP OBJECTS { acdCfmResultTwoWayDelayPeriodIndex, acdCfmResultTwoWayDelayIntervalStart, acdCfmResultTwoWayDelayValid, acdCfmResultTwoWayDelayAlert, acdCfmResultTwoWayDelayAvgAlert, acdCfmResultTwoWayDelaySamples, acdCfmResultTwoWayDelayMinValue, acdCfmResultTwoWayDelayMaxValue, acdCfmResultTwoWayDelayAvgValue, acdCfmResultTwoWayDelayThreshExc, acdCfmResultTwoWayDelayInstValue } STATUS current DESCRIPTION "Objects for the Two Way Delay result Group." ::= { acdCfmGroups 4 } acdCfmResultTwoWayDvGroup OBJECT-GROUP OBJECTS { acdCfmResultTwoWayDvPeriodIndex, acdCfmResultTwoWayDvIntervalStart, acdCfmResultTwoWayDvValid, acdCfmResultTwoWayDvAlert, acdCfmResultTwoWayDvAvgAlert, acdCfmResultTwoWayDvSamples, acdCfmResultTwoWayDvMinValue, acdCfmResultTwoWayDvMaxValue, acdCfmResultTwoWayDvAvgValue, acdCfmResultTwoWayDvThreshExc, acdCfmResultTwoWayDvInstValue } STATUS current DESCRIPTION "Objects for the Two Way Delay varition result Group." ::= { acdCfmGroups 5 } acdCfmHistResultOneWayDelayGroup OBJECT-GROUP OBJECTS { acdCfmHistResultOneWayDelayStatus, acdCfmHistResultOneWayDelayDuration, acdCfmHistResultOneWayDelayIntervalEnd, acdCfmHistResultOneWayDelaySamples, acdCfmHistResultOneWayDelayMinValue, acdCfmHistResultOneWayDelayMaxValue, acdCfmHistResultOneWayDelayAvgValue, acdCfmHistResultOneWayDelayThreshExc } STATUS current DESCRIPTION "Objects for the One Way Delay history result Group." ::= { acdCfmGroups 6 } acdCfmHistResultOneWayDvGroup OBJECT-GROUP OBJECTS { acdCfmHistResultOneWayDvStatus, acdCfmHistResultOneWayDvDuration, acdCfmHistResultOneWayDvIntervalEnd, acdCfmHistResultOneWayDvSamples, acdCfmHistResultOneWayDvMinValue, acdCfmHistResultOneWayDvMaxValue, acdCfmHistResultOneWayDvAvgValue, acdCfmHistResultOneWayDvThreshExc } STATUS current DESCRIPTION "Objects for the One Way Delay variation history result Group." ::= { acdCfmGroups 7 } acdCfmHistResultTwoWayDelayGroup OBJECT-GROUP OBJECTS { acdCfmHistResultTwoWayDelayStatus, acdCfmHistResultTwoWayDelayDuration, acdCfmHistResultTwoWayDelayIntervalEnd, acdCfmHistResultTwoWayDelaySamples, acdCfmHistResultTwoWayDelayMinValue, acdCfmHistResultTwoWayDelayMaxValue, acdCfmHistResultTwoWayDelayAvgValue, acdCfmHistResultTwoWayDelayThreshExc } STATUS current DESCRIPTION "Objects for the Two Way Delay history result Group." ::= { acdCfmGroups 8 } acdCfmHistResultTwoWayDvGroup OBJECT-GROUP OBJECTS { acdCfmHistResultTwoWayDvStatus, acdCfmHistResultTwoWayDvDuration, acdCfmHistResultTwoWayDvIntervalEnd, acdCfmHistResultTwoWayDvSamples, acdCfmHistResultTwoWayDvMinValue, acdCfmHistResultTwoWayDvMaxValue, acdCfmHistResultTwoWayDvAvgValue, acdCfmHistResultTwoWayDvThreshExc } STATUS current DESCRIPTION "Objects for the Two Way Delay variation history result Group." ::= { acdCfmGroups 9 } acdCfmPktLossCfgGroup OBJECT-GROUP OBJECTS { acdCfmPktLossCfgRowStatus, acdCfmPktLossCfgMepIdx, acdCfmPktLossCfgRemoteMepId, acdCfmPktLossCfgPriority, acdCfmPktLossCfgEnable, acdCfmPktLossCfgInterval, acdCfmPktLossCfgRefPeriod, acdCfmPktLossCfgThresh, acdCfmPktLossCfgRatioThresh } STATUS current DESCRIPTION "Objects for Packet loss configuration Group." ::= { acdCfmGroups 10 } acdCfmResultPktLossGroup OBJECT-GROUP OBJECTS { acdCfmResultPktLossPeriodIndex, acdCfmResultPktLossIntervalStart, acdCfmResultPktLossValid, acdCfmResultPktLossAlert, acdCfmResultPktLossSamples, acdCfmResultPktLossOverflowSamples, acdCfmResultPktLossHCSamples, acdCfmResultPktLossNbrLoss, acdCfmResultPktLossOverflowNbrLoss, acdCfmResultPktLossHCNbrLoss, acdCfmResultPktLossNbrGaps, acdCfmResultPktLossOverflowNbrGaps, acdCfmResultPktLossHCNbrGaps, acdCfmResultPktLossLargestGap, acdCfmResultPktLossOverflowLargestGap, acdCfmResultPktLossHCLargestGap, acdCfmResultPktLossRatio } STATUS current DESCRIPTION "Objects for Packet loss result Group." ::= { acdCfmGroups 11 } acdCfmHistResultPktLossGroup OBJECT-GROUP OBJECTS { acdCfmHistResultPktLossStatus, acdCfmHistResultPktLossDuration, acdCfmHistResultPktLossIntervalEnd, acdCfmHistResultPktLossSamples, acdCfmHistResultPktLossOverflowSamples, acdCfmHistResultPktLossHCSamples, acdCfmHistResultPktLossNbrLoss, acdCfmHistResultPktLossOverflowNbrLoss, acdCfmHistResultPktLossHCNbrLoss, acdCfmHistResultPktLossNbrGaps, acdCfmHistResultPktLossOverflowNbrGaps, acdCfmHistResultPktLossHCNbrGaps, acdCfmHistResultPktLossLargestGap, acdCfmHistResultPktLossOverflowLargestGap, acdCfmHistResultPktLossHCLargestGap, acdCfmHistResultPktLossRatio } STATUS current DESCRIPTION "Objects for Packet loss history result Group." ::= { acdCfmGroups 12 } acdCfmMepStatsTxGroup OBJECT-GROUP OBJECTS { acdCfmMepStatsTxCcmPdu, acdCfmMepStatsTxLbmPdu, acdCfmMepStatsTxLbrPdu, acdCfmMepStatsTxLtmPdu, acdCfmMepStatsTxLtrPdu, acdCfmMepStatsTxAisPdu, acdCfmMepStatsTxLckPdu, acdCfmMepStatsTxTstPdu, acdCfmMepStatsTxLinearApsPdu, acdCfmMepStatsTxRingApsPdu, acdCfmMepStatsTxMccPdu, acdCfmMepStatsTxLmmPdu, acdCfmMepStatsTxLmrPdu, acdCfmMepStatsTx1dmPdu, acdCfmMepStatsTxDmmPdu, acdCfmMepStatsTxDmrPdu, acdCfmMepStatsTxExmPdu, acdCfmMepStatsTxExrPdu, acdCfmMepStatsTxVsmPdu, acdCfmMepStatsTxVsrPdu, acdCfmMepStatsTxCsfPdu, acdCfmMepStatsTxSlmPdu, acdCfmMepStatsTxSlrPdu } STATUS current DESCRIPTION "Objects for MEP transmit statistics Group." ::= { acdCfmGroups 13 } acdCfmMepStatsRxGroup OBJECT-GROUP OBJECTS { acdCfmMepStatsRxCcmPdu, acdCfmMepStatsRxLbmPdu, acdCfmMepStatsRxLbrPdu, acdCfmMepStatsRxLtmPdu, acdCfmMepStatsRxLtrPdu, acdCfmMepStatsRxAisPdu, acdCfmMepStatsRxLckPdu, acdCfmMepStatsRxTstPdu, acdCfmMepStatsRxLinearApsPdu, acdCfmMepStatsRxRingApsPdu, acdCfmMepStatsRxMccPdu, acdCfmMepStatsRxLmmPdu, acdCfmMepStatsRxLmrPdu, acdCfmMepStatsRx1dmPdu, acdCfmMepStatsRxDmmPdu, acdCfmMepStatsRxDmrPdu, acdCfmMepStatsRxExmPdu, acdCfmMepStatsRxExrPdu, acdCfmMepStatsRxVsmPdu, acdCfmMepStatsRxVsrPdu, acdCfmMepStatsRxCcmSeqErrors, acdCfmMepStatsRxLtrUnexpectedPdu, acdCfmMepStatsRxLtrMacErrors, acdCfmMepStatsRxLbrOooErrors, acdCfmMepStatsRxLbrUnexpectedPdu, acdCfmMepStatsRxLbrDataErrors, acdCfmMepStatsRxCsfPdu, acdCfmMepStatsRxSlrPdu } STATUS current DESCRIPTION "Objects for MEP receive statistics Group." ::= { acdCfmGroups 14 } acdCfmMepDmStatsGroup OBJECT-GROUP OBJECTS { acdCfmMepDmStatsTxDmmPdu, acdCfmMepDmStatsRxDmmPdu, acdCfmMepDmStatsTxDmrPdu, acdCfmMepDmStatsRxDmrPdu } STATUS current DESCRIPTION "Objects for DMM/DMR MEP statistics Group." ::= { acdCfmGroups 15 } acdCfmMepStackGroup OBJECT-GROUP OBJECTS { acdCfmMepIdx } STATUS current DESCRIPTION "Objects for cfm Stack Group." ::= { acdCfmGroups 16 } acdCfmMepSlmStatsGroup OBJECT-GROUP OBJECTS { acdCfmMepStatsTxSlmPdu, acdCfmMepStatsRxSlmPdu, acdCfmMepStatsTxSlrPdu, acdCfmMepStatsRxSlrPdu } STATUS current DESCRIPTION "Objects for SLM/SLR MEP statistics Group." ::= { acdCfmGroups 17 } acdCfmSlmCfgGroup OBJECT-GROUP OBJECTS { acdCfmSlmCfgRowStatus, acdCfmSlmCfgMepIdx, acdCfmSlmCfgRemoteMepId, acdCfmSlmCfgPriority, acdCfmSlmCfgState, acdCfmSlmCfgInterval, acdCfmSlmCfgRefPeriod, acdCfmSlmCfgNearEndThresh, acdCfmSlmCfgFarEndThresh, acdCfmSlmCfgName } STATUS current DESCRIPTION "Objects for SLM configuration Group." ::= { acdCfmGroups 18 } acdCfmSlmResultGroup OBJECT-GROUP OBJECTS { acdCfmSlmResultPeriodIndex, acdCfmSlmResultIntervalStart, acdCfmSlmResultValid, acdCfmSlmResultNearEndAlert, acdCfmSlmResultFarEndAlert, acdCfmSlmResultTxSlm, acdCfmSlmResultRxSlr, acdCfmSlmResultRemoteRxSlm, acdCfmSlmResultNearEndNbrLoss, acdCfmSlmResultFarEndNbrLoss, acdCfmSlmResultNearEndRatio, acdCfmSlmResultFarEndRatio, acdCfmSlmResultNbrGaps, acdCfmSlmResultLargestGap } STATUS current DESCRIPTION "Objects for SLM result Group." ::= { acdCfmGroups 19 } acdCfmSlmHistResultGroup OBJECT-GROUP OBJECTS { acdCfmSlmHistResultPeriodIndex, acdCfmSlmHistResultIntervalEnd, acdCfmSlmHistResultTxSlm, acdCfmSlmHistResultRxSlr, acdCfmSlmHistResultRemoteRxSlm, acdCfmSlmHistResultNearEndRatio, acdCfmSlmHistResultFarEndRatio, acdCfmSlmHistResultNbrGaps, acdCfmSlmHistResultLargestGap } STATUS current DESCRIPTION "Objects for SLM history result Group." ::= { acdCfmGroups 20 } acdCfmCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for support of the ACD-CFM-MIB module." MODULE MANDATORY-GROUPS { acdCfmDmCfgGroup, acdCfmResultOneWayDelayGroup, acdCfmResultOneWayDvGroup, acdCfmResultTwoWayDelayGroup, acdCfmResultTwoWayDvGroup, acdCfmHistResultOneWayDelayGroup, acdCfmHistResultOneWayDvGroup, acdCfmHistResultTwoWayDelayGroup, acdCfmHistResultTwoWayDvGroup, acdCfmPktLossCfgGroup, acdCfmResultPktLossGroup, acdCfmHistResultPktLossGroup, acdCfmMepStatsTxGroup, acdCfmMepStatsRxGroup, acdCfmMepDmStatsGroup, acdCfmMepStackGroup, acdCfmMepSlmStatsGroup, acdCfmSlmCfgGroup, acdCfmSlmResultGroup, acdCfmSlmHistResultGroup } OBJECT acdCfmDmCfgRowStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT acdCfmPktLossCfgRowStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT acdCfmSlmCfgRowStatus SYNTAX RowStatus { active(1) } DESCRIPTION "Support for createAndWait is not required." ::= { acdCfmCompliances 1 } END