-- -- Accedian Enterprise Specific MIB -- -- Copyright (c) 2005-2009, Accedian Networks, Inc. -- All rights reserved. -- -- The contents of this document are subject to change without notice. -- ACD-PAA-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Integer32, Unsigned32 FROM SNMPv2-SMI DisplayString, TruthValue, MacAddress, DateAndTime FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF acdMibs FROM ACCEDIAN-SMI; acdPaa MODULE-IDENTITY LAST-UPDATED "201011100100Z" ORGANIZATION "Accedian Networks, Inc." CONTACT-INFO "Accedian Technical Assistance Center Accedian Networks, Inc. 4878 Levy, suite 202 Saint-Laurent, Quebec Canada H4R 2P1 E-mail: support@accedian.com" DESCRIPTION "PAA database for this Accedian Networks device." REVISION "201011100100Z" -- 10 November 2010 DESCRIPTION "Add compliance section." REVISION "200902230100Z" -- 23 Feb 2009 DESCRIPTION "Add support for extended packet loss ratio." REVISION "200802060100Z" -- 6 Feb 2008 DESCRIPTION "Add support for history table." REVISION "200710120100Z" -- 12 Oct 2007 DESCRIPTION "Add support for one-way delay and L2 address discovery." REVISION "200612180100Z" -- 18 Dec 2006 DESCRIPTION "Change the loss ration to in hundredths of a percent." REVISION "200611110100Z" -- 11 Nov 2006 DESCRIPTION "Initial version of MIB module ACD-PAA-MIB." ::= { acdMibs 5 } acdPaaNotifications OBJECT IDENTIFIER ::= { acdPaa 7 } acdPaaMIBObjects OBJECT IDENTIFIER ::= { acdPaa 8 } acdPaaConformance OBJECT IDENTIFIER ::= { acdPaa 9 } --------------------------------------------------------------------------- -- The PAA Results table -- This table contains all PAA entry results. --------------------------------------------------------------------------- acdPaaResultTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdPaaResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Result table of all Paa entries" ::= { acdPaa 1 } acdPaaResultEntry OBJECT-TYPE SYNTAX AcdPaaResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of results for a PAA instance." INDEX { acdPaaResultID } ::= { acdPaaResultTable 1 } AcdPaaResultEntry ::= SEQUENCE { acdPaaResultID Unsigned32, acdPaaResultState INTEGER, acdPaaResultPktLossNeCurrValid TruthValue, acdPaaResultPktLossNeCurrValue Unsigned32, acdPaaResultPktLossNePrevValid TruthValue, acdPaaResultPktLossNePrevValue Unsigned32, acdPaaResultPktLossFeCurrValid TruthValue, acdPaaResultPktLossFeCurrValue Unsigned32, acdPaaResultPktLossFePrevValid TruthValue, acdPaaResultPktLossFePrevValue Unsigned32, acdPaaResultOneWayDvInstValue Integer32, acdPaaResultOneWayDvCurrValid TruthValue, acdPaaResultOneWayDvCurrMinValue Integer32, acdPaaResultOneWayDvCurrMaxValue Integer32, acdPaaResultOneWayDvCurrAvgValue Integer32, acdPaaResultOneWayDvCurrThreshExc Unsigned32, acdPaaResultOneWayDvPrevValid TruthValue, acdPaaResultOneWayDvPrevMinValue Integer32, acdPaaResultOneWayDvPrevMaxValue Integer32, acdPaaResultOneWayDvPrevAvgValue Integer32, acdPaaResultOneWayDvPrevThreshEx Unsigned32, acdPaaResultTwoWayDelayInstValue Integer32, acdPaaResultTwoWayDelayCurrValid TruthValue, acdPaaResultTwoWayDelayCurrMinValue Integer32, acdPaaResultTwoWayDelayCurrMaxValue Integer32, acdPaaResultTwoWayDelayCurrAvgValue Integer32, acdPaaResultTwoWayDelayCurrThreshEx Unsigned32, acdPaaResultTwoWayDelayPrevValid TruthValue, acdPaaResultTwoWayDelayPrevMinValue Integer32, acdPaaResultTwoWayDelayPrevMaxValue Integer32, acdPaaResultTwoWayDelayPrevAvgValue Integer32, acdPaaResultTwoWayDelayPrevThreshEx Unsigned32, acdPaaResultTwoWayDvInstValue Integer32, acdPaaResultTwoWayDvCurrValid TruthValue, acdPaaResultTwoWayDvCurrMinValue Integer32, acdPaaResultTwoWayDvCurrMaxValue Integer32, acdPaaResultTwoWayDvCurrAvgValue Integer32, acdPaaResultTwoWayDvCurrThreshEx Unsigned32, acdPaaResultTwoWayDvPrevValid TruthValue, acdPaaResultTwoWayDvPrevMinValue Integer32, acdPaaResultTwoWayDvPrevMaxValue Integer32, acdPaaResultTwoWayDvPrevAvgValue Integer32, acdPaaResultTwoWayDvPrevThreshEx Unsigned32, acdPaaResultOneWayDelayInstValue Integer32, acdPaaResultOneWayDelayCurrValid TruthValue, acdPaaResultOneWayDelayCurrMinValue Integer32, acdPaaResultOneWayDelayCurrMaxValue Integer32, acdPaaResultOneWayDelayCurrAvgValue Integer32, acdPaaResultOneWayDelayCurrThreshEx Unsigned32, acdPaaResultOneWayDelayPrevValid TruthValue, acdPaaResultOneWayDelayPrevMinValue Integer32, acdPaaResultOneWayDelayPrevMaxValue Integer32, acdPaaResultOneWayDelayPrevAvgValue Integer32, acdPaaResultOneWayDelayPrevThreshEx Unsigned32, acdPaaResultPktLossTime DateAndTime, acdPaaResultOneWayTime DateAndTime, acdPaaResultTwoWayTime DateAndTime, acdPaaResultPktLossNeCurrSamples Unsigned32, acdPaaResultPktLossNePrevSamples Unsigned32, acdPaaResultPktLossFeCurrSamples Unsigned32, acdPaaResultPktLossFePrevSamples Unsigned32, acdPaaResultOneWayDelayCurrSamples Unsigned32, acdPaaResultOneWayDelayPrevSamples Unsigned32, acdPaaResultOneWayDvCurrSamples Unsigned32, acdPaaResultOneWayDvPrevSamples Unsigned32, acdPaaResultTwoWayDelayCurrSamples Unsigned32, acdPaaResultTwoWayDelayPrevSamples Unsigned32, acdPaaResultTwoWayDvCurrSamples Unsigned32, acdPaaResultTwoWayDvPrevSamples Unsigned32, acdPaaResultIgmpJoinDelayInstValue Integer32, acdPaaResultIgmpJoinDelayCurrValid TruthValue, acdPaaResultIgmpJoinDelayCurrMinValue Integer32, acdPaaResultIgmpJoinDelayCurrMaxValue Integer32, acdPaaResultIgmpJoinDelayCurrAvgValue Integer32, acdPaaResultIgmpJoinDelayCurrThreshEx Unsigned32, acdPaaResultIgmpJoinDelayPrevValid TruthValue, acdPaaResultIgmpJoinDelayPrevMinValue Integer32, acdPaaResultIgmpJoinDelayPrevMaxValue Integer32, acdPaaResultIgmpJoinDelayPrevAvgValue Integer32, acdPaaResultIgmpJoinDelayPrevThreshEx Unsigned32, acdPaaResultIgmpLeaveDelayInstValue Integer32, acdPaaResultIgmpLeaveDelayCurrValid TruthValue, acdPaaResultIgmpLeaveDelayCurrMinValue Integer32, acdPaaResultIgmpLeaveDelayCurrMaxValue Integer32, acdPaaResultIgmpLeaveDelayCurrAvgValue Integer32, acdPaaResultIgmpLeaveDelayCurrThreshEx Unsigned32, acdPaaResultIgmpLeaveDelayPrevValid TruthValue, acdPaaResultIgmpLeaveDelayPrevMinValue Integer32, acdPaaResultIgmpLeaveDelayPrevMaxValue Integer32, acdPaaResultIgmpLeaveDelayPrevAvgValue Integer32, acdPaaResultIgmpLeaveDelayPrevThreshEx Unsigned32, acdPaaResultIgmpJoinDelayTime DateAndTime, acdPaaResultIgmpLeaveDelayTime DateAndTime, acdPaaResultIgmpJoinDelayCurrSamples Unsigned32, acdPaaResultIgmpJoinDelayPrevSamples Unsigned32, acdPaaResultIgmpLeaveDelayCurrSamples Unsigned32, acdPaaResultIgmpLeaveDelayPrevSamples Unsigned32, acdPaaResultPktLossCurrGaps Unsigned32, acdPaaResultPktLossPrevGaps Unsigned32, acdPaaResultPktLossCurrLargestGap Unsigned32, acdPaaResultPktLossPrevLargestGap Unsigned32, acdPaaResultPktLossNeCurrValueExt Unsigned32, acdPaaResultPktLossNePrevValueExt Unsigned32, acdPaaResultPktLossFeCurrValueExt Unsigned32, acdPaaResultPktLossFePrevValueExt Unsigned32, acdPaaResultPktLossNeCurrNbrLoss Unsigned32, acdPaaResultPktLossNePrevNbrLoss Unsigned32, acdPaaResultPktLossFeCurrNbrLoss Unsigned32, acdPaaResultPktLossFePrevNbrLoss Unsigned32 } acdPaaResultID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each PAA instance. Its value ranges from 1 to MAXINT (4 bytes). " ::= { acdPaaResultEntry 1 } acdPaaResultState OBJECT-TYPE SYNTAX INTEGER { disabled(0), associating(1), associated(2), running(3), idle(4), lockedIS(5), lockedOOS(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the state of the instance." ::= { acdPaaResultEntry 2 } acdPaaResultPktLossNeCurrValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the Near-end current packet loss results." ::= { acdPaaResultEntry 3 } acdPaaResultPktLossNeCurrValue OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Near-end current packet loss. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent (100 is 1%)." ::= { acdPaaResultEntry 4 } acdPaaResultPktLossNePrevValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the Near-end previous packet loss results." ::= { acdPaaResultEntry 5 } acdPaaResultPktLossNePrevValue OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Near-end previous packet loss. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent (100 is 1%)." ::= { acdPaaResultEntry 6 } acdPaaResultPktLossFeCurrValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the Far-end current packet loss results." ::= { acdPaaResultEntry 7 } acdPaaResultPktLossFeCurrValue OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Far-end current packet loss. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent (100 is 1%)." ::= { acdPaaResultEntry 8 } acdPaaResultPktLossFePrevValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the Far-end previous packet loss results." ::= { acdPaaResultEntry 9 } acdPaaResultPktLossFePrevValue OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Far-end previous packet loss. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent (100 is 1%)." ::= { acdPaaResultEntry 10 } acdPaaResultOneWayDvInstValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the One-way delay variation instantaneous value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 11 } acdPaaResultOneWayDvCurrValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the current One-way delay variation results." ::= { acdPaaResultEntry 12 } acdPaaResultOneWayDvCurrMinValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current One-way delay variation minimum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 13 } acdPaaResultOneWayDvCurrMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current One-way delay variation maximum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 14 } acdPaaResultOneWayDvCurrAvgValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current One-way delay variation average value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 15 } acdPaaResultOneWayDvCurrThreshExc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current number of samples exceeding the limit." ::= { acdPaaResultEntry 16 } acdPaaResultOneWayDvPrevValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the previous One-way delay variation results." ::= { acdPaaResultEntry 17 } acdPaaResultOneWayDvPrevMinValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous One-way delay variation minimum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 18 } acdPaaResultOneWayDvPrevMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous One-way delay variation maximum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 19 } acdPaaResultOneWayDvPrevAvgValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous One-way delay variation average value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 20 } acdPaaResultOneWayDvPrevThreshEx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous number of samples exceeding the limit." ::= { acdPaaResultEntry 21 } acdPaaResultTwoWayDelayInstValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Two-way delay instantaneous value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 22 } acdPaaResultTwoWayDelayCurrValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the current Two-way delay results." ::= { acdPaaResultEntry 23 } acdPaaResultTwoWayDelayCurrMinValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current Two-way delay minimum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 24 } acdPaaResultTwoWayDelayCurrMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current Two-way delay maximum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 25 } acdPaaResultTwoWayDelayCurrAvgValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current Two-way delay average value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 26 } acdPaaResultTwoWayDelayCurrThreshEx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current number of samples exceeding the limit." ::= { acdPaaResultEntry 27 } acdPaaResultTwoWayDelayPrevValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the previous Two-way delay results." ::= { acdPaaResultEntry 28 } acdPaaResultTwoWayDelayPrevMinValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous Two-way delay minimum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 29 } acdPaaResultTwoWayDelayPrevMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous Two-way delay maximum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 30 } acdPaaResultTwoWayDelayPrevAvgValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous Two-way delay average value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 31 } acdPaaResultTwoWayDelayPrevThreshEx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous number of samples exceeding the limit." ::= { acdPaaResultEntry 32 } acdPaaResultTwoWayDvInstValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Two-way delay variation instantaneous value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 33 } acdPaaResultTwoWayDvCurrValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the current Two-way delay variation results." ::= { acdPaaResultEntry 34 } acdPaaResultTwoWayDvCurrMinValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current Two-way delay variation minimum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 35 } acdPaaResultTwoWayDvCurrMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current Two-way delay variation maximum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 36 } acdPaaResultTwoWayDvCurrAvgValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current Two-way delay variation average value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 37 } acdPaaResultTwoWayDvCurrThreshEx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current number of samples exceeding the limit." ::= { acdPaaResultEntry 38 } acdPaaResultTwoWayDvPrevValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the previous Two-way delay variation results." ::= { acdPaaResultEntry 39 } acdPaaResultTwoWayDvPrevMinValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous Two-way delay variation minimum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 40 } acdPaaResultTwoWayDvPrevMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous Two-way delay variation maximum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 41 } acdPaaResultTwoWayDvPrevAvgValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous Two-way delay variation average value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 42 } acdPaaResultTwoWayDvPrevThreshEx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous number of samples exceeding the limit." ::= { acdPaaResultEntry 43 } acdPaaResultOneWayDelayInstValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the One-way delay instantaneous value. The value is express in micro-seconds." ::= { acdPaaResultEntry 44 } acdPaaResultOneWayDelayCurrValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the validity of the current One-way delay results." ::= { acdPaaResultEntry 45 } acdPaaResultOneWayDelayCurrMinValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the current One-way delay minimum value. The value is express in micro-seconds." ::= { acdPaaResultEntry 46 } acdPaaResultOneWayDelayCurrMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the current One-way delay maximum value. The value is express in micro-seconds." ::= { acdPaaResultEntry 47 } acdPaaResultOneWayDelayCurrAvgValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the current One-way delay average value. The value is express in micro-seconds." ::= { acdPaaResultEntry 48 } acdPaaResultOneWayDelayCurrThreshEx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the current number of sample exceeding the limit." ::= { acdPaaResultEntry 49 } acdPaaResultOneWayDelayPrevValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the validity of the previous One-way delay results." ::= { acdPaaResultEntry 50 } acdPaaResultOneWayDelayPrevMinValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the previous One-way delay minimum value. The value is express in micro-seconds." ::= { acdPaaResultEntry 51 } acdPaaResultOneWayDelayPrevMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the previous One-way delay maximum value. The value is express in micro-seconds." ::= { acdPaaResultEntry 52 } acdPaaResultOneWayDelayPrevAvgValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the previous One-way delay average value. The value is express in micro-seconds." ::= { acdPaaResultEntry 53 } acdPaaResultOneWayDelayPrevThreshEx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the previous number of sample exceeding the limit." ::= { acdPaaResultEntry 54 } acdPaaResultPktLossTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time when the current packet loss results were moved to the previous packet loss results." ::= { acdPaaResultEntry 55 } acdPaaResultOneWayTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time when the current one-way results were moved to the previous one-way results." ::= { acdPaaResultEntry 56 } acdPaaResultTwoWayTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time when the current two-way results were moved to the previous two-way results." ::= { acdPaaResultEntry 57 } acdPaaResultPktLossNeCurrSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered to calculate the current period near-end packet loss results." ::= { acdPaaResultEntry 58 } acdPaaResultPktLossNePrevSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered to calculate the previous period near-end packet loss results." ::= { acdPaaResultEntry 59 } acdPaaResultPktLossFeCurrSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered to calculate the current period far-end packet loss results." ::= { acdPaaResultEntry 60 } acdPaaResultPktLossFePrevSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered to calculate the previous period far-end packet loss results." ::= { acdPaaResultEntry 61 } acdPaaResultOneWayDelayCurrSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered to calculate the current period one-way delay results." ::= { acdPaaResultEntry 62 } acdPaaResultOneWayDelayPrevSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered to calculate the previous period one-way delay results." ::= { acdPaaResultEntry 63 } acdPaaResultOneWayDvCurrSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered to calculate the current period one-way delay variation results." ::= { acdPaaResultEntry 64 } acdPaaResultOneWayDvPrevSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered to calculate the previous period one-way delay variation results." ::= { acdPaaResultEntry 65 } acdPaaResultTwoWayDelayCurrSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered to calculate the current period two-way delay results." ::= { acdPaaResultEntry 66 } acdPaaResultTwoWayDelayPrevSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered to calculate the previous period two-way delay results." ::= { acdPaaResultEntry 67 } acdPaaResultTwoWayDvCurrSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered to calculate the current period two-way delay variation results." ::= { acdPaaResultEntry 68 } acdPaaResultTwoWayDvPrevSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered to calculate the previous period two-way delay variation results." ::= { acdPaaResultEntry 69 } acdPaaResultIgmpJoinDelayInstValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the IGMP Join delay instantaneous value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 70 } acdPaaResultIgmpJoinDelayCurrValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the current IGMP Join delay results." ::= { acdPaaResultEntry 71 } acdPaaResultIgmpJoinDelayCurrMinValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current IGMP Join delay minimum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 72 } acdPaaResultIgmpJoinDelayCurrMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current IGMP Join delay maximum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 73 } acdPaaResultIgmpJoinDelayCurrAvgValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current IGMP Join delay average value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 74 } acdPaaResultIgmpJoinDelayCurrThreshEx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current number of IGMP Join samples exceeding the limit." ::= { acdPaaResultEntry 75 } acdPaaResultIgmpJoinDelayPrevValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the previous IGMP Join delay results." ::= { acdPaaResultEntry 76 } acdPaaResultIgmpJoinDelayPrevMinValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous IGMP Join delay minimum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 77 } acdPaaResultIgmpJoinDelayPrevMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous IGMP Join delay maximum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 78 } acdPaaResultIgmpJoinDelayPrevAvgValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous IGMP Join delay average value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 79 } acdPaaResultIgmpJoinDelayPrevThreshEx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous number of IGMP Join samples exceeding the limit." ::= { acdPaaResultEntry 80 } acdPaaResultIgmpLeaveDelayInstValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the IGMP Leave delay instantaneous value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 81 } acdPaaResultIgmpLeaveDelayCurrValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the current IGMP Leave delay results." ::= { acdPaaResultEntry 82 } acdPaaResultIgmpLeaveDelayCurrMinValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current IGMP Leave delay minimum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 83 } acdPaaResultIgmpLeaveDelayCurrMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current IGMP Leave delay maximum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 84 } acdPaaResultIgmpLeaveDelayCurrAvgValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current IGMP Leave delay average value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 85 } acdPaaResultIgmpLeaveDelayCurrThreshEx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current number of IGMP Leave samples exceeding the limit." ::= { acdPaaResultEntry 86 } acdPaaResultIgmpLeaveDelayPrevValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the previous IGMP Leave delay results." ::= { acdPaaResultEntry 87 } acdPaaResultIgmpLeaveDelayPrevMinValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous IGMP Leave delay minimum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 88 } acdPaaResultIgmpLeaveDelayPrevMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous IGMP Leave delay maximum value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 89 } acdPaaResultIgmpLeaveDelayPrevAvgValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous IGMP Leave delay average value. The value is expressed in micro-seconds." ::= { acdPaaResultEntry 90 } acdPaaResultIgmpLeaveDelayPrevThreshEx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous number of IGMP Leave samples exceeding the limit." ::= { acdPaaResultEntry 91 } acdPaaResultIgmpJoinDelayTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time when the current IGMP Join delay results were moved to the previous IGMP join delay results." ::= { acdPaaResultEntry 92 } acdPaaResultIgmpLeaveDelayTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time when the current IGMP Leave results were moved to the previous IGMP Leave results." ::= { acdPaaResultEntry 93 } acdPaaResultIgmpJoinDelayCurrSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMP Join samples gathered to calculate the current period IGMP Join delay results." ::= { acdPaaResultEntry 94 } acdPaaResultIgmpJoinDelayPrevSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMP Join samples gathered to calculate the previous period IGMP Join delay results." ::= { acdPaaResultEntry 95 } acdPaaResultIgmpLeaveDelayCurrSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMP Leave samples gathered to calculate the current period IGMP Leave delay results." ::= { acdPaaResultEntry 96 } acdPaaResultIgmpLeaveDelayPrevSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMP Leave samples gathered to calculate the previous period IGMP Leave delay results." ::= { acdPaaResultEntry 97 } acdPaaResultPktLossCurrGaps OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of gaps that occured in the current period." ::= { acdPaaResultEntry 98 } acdPaaResultPktLossPrevGaps OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of gaps that occured in the previous period." ::= { acdPaaResultEntry 99 } acdPaaResultPktLossCurrLargestGap OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the size of the largest gap that occured in the current period." ::= { acdPaaResultEntry 100 } acdPaaResultPktLossPrevLargestGap OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the size of the largest gap that occured in the previous period." ::= { acdPaaResultEntry 101 } acdPaaResultPktLossNeCurrValueExt OBJECT-TYPE SYNTAX Unsigned32 (0..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Extended near-end current packet loss. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%)." ::= { acdPaaResultEntry 102 } acdPaaResultPktLossNePrevValueExt OBJECT-TYPE SYNTAX Unsigned32 (0..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Extended near-end previous packet loss. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%)." ::= { acdPaaResultEntry 103 } acdPaaResultPktLossFeCurrValueExt OBJECT-TYPE SYNTAX Unsigned32 (0..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Extended far-end current packet loss. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%)." ::= { acdPaaResultEntry 104 } acdPaaResultPktLossFePrevValueExt OBJECT-TYPE SYNTAX Unsigned32 (0..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Extended far-end previous packet loss. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%)." ::= { acdPaaResultEntry 105 } acdPaaResultPktLossNeCurrNbrLoss OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current period number of near-end packet lost. This should be less or equal to acdPaaResultPktLossNeCurrSamples. " ::= { acdPaaResultEntry 106 } acdPaaResultPktLossNePrevNbrLoss OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous period number of near-end packet lost. This should be less or equal to acdPaaResultPktLossNePrevSamples." ::= { acdPaaResultEntry 107 } acdPaaResultPktLossFeCurrNbrLoss OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current period number of far-end packet lost. This should be less or equal to acdPaaResultPktLossFeCurrSamples. " ::= { acdPaaResultEntry 108 } acdPaaResultPktLossFePrevNbrLoss OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the previous period number of far-end packet lost. This should be less or equal to acdPaaResultPktLossFePrevSamples." ::= { acdPaaResultEntry 109 } --------------------------------------------------------------------------- -- The PAA status table -- This table contains all PAA entry statuses. --------------------------------------------------------------------------- acdPaaStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdPaaStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Status table of all Paa entries" ::= { acdPaa 2 } acdPaaStatusEntry OBJECT-TYPE SYNTAX AcdPaaStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of the status for a PAA instance." INDEX { acdPaaStatusID } ::= { acdPaaStatusTable 1 } AcdPaaStatusEntry ::= SEQUENCE { acdPaaStatusID Unsigned32, acdPaaStatusCcAlert TruthValue, acdPaaStatusPktLossAlert TruthValue, acdPaaStatusOneWayDvAlert TruthValue, acdPaaStatusOneWayAvgDvAlert TruthValue, acdPaaStatusTwoWayDelayAlert TruthValue, acdPaaStatusTwoWayAvgDelayAlert TruthValue, acdPaaStatusTwoWayDvAlert TruthValue, acdPaaStatusTwoWayAvgDvAlert TruthValue, acdPaaStatusOneWayDelayAlert TruthValue, acdPaaStatusOneWayAvgDelayAlert TruthValue, acdPaaStatusState INTEGER, acdPaaStatusPeerAddress DisplayString } acdPaaStatusID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each PAA instance. Its value ranges from 1 to MAXINT (4 bytes). " ::= { acdPaaStatusEntry 1 } acdPaaStatusCcAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the presence of the Connectivity Check alert." ::= { acdPaaStatusEntry 2 } acdPaaStatusPktLossAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the presence of the Packet Loss alert." ::= { acdPaaStatusEntry 3 } acdPaaStatusOneWayDvAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the presence of the One-way Delay Variation alert." ::= { acdPaaStatusEntry 4 } acdPaaStatusOneWayAvgDvAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the presence of the One-way Average Delay Variation alert." ::= { acdPaaStatusEntry 5 } acdPaaStatusTwoWayDelayAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the presence of the Two-way Delay alert." ::= { acdPaaStatusEntry 6 } acdPaaStatusTwoWayAvgDelayAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the presence of the Two-way Average Delay alert." ::= { acdPaaStatusEntry 7 } acdPaaStatusTwoWayDvAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the presence of the Two-way Delay Variation alert." ::= { acdPaaStatusEntry 8 } acdPaaStatusTwoWayAvgDvAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the presence of the Two-way Average Delay Variation alert." ::= { acdPaaStatusEntry 9 } acdPaaStatusOneWayDelayAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the presence of the One Way Delay alert." ::= { acdPaaStatusEntry 10 } acdPaaStatusOneWayAvgDelayAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the presence of the One Way Average Delay alert." ::= { acdPaaStatusEntry 11 } acdPaaStatusState OBJECT-TYPE SYNTAX INTEGER { disabled(0), associating(1), associated(2), running(3), idle(4), lockedIS(5), lockedOOS(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Paa instance state." ::= { acdPaaStatusEntry 12 } acdPaaStatusPeerAddress OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The peer address. Dynamically resolved or statically configured." ::= { acdPaaStatusEntry 13 } --------------------------------------------------------------------------- -- The UDP PAA configuration table -- This table contains all UDP PAA entry configurations. --------------------------------------------------------------------------- acdPaaUdpCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdPaaUdpCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration table of all UDP PAA entries." ::= { acdPaa 3 } acdPaaUdpCfgEntry OBJECT-TYPE SYNTAX AcdPaaUdpCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of all settings to manage a PAA instance." INDEX { acdPaaUdpCfgID } ::= { acdPaaUdpCfgTable 1 } AcdPaaUdpCfgEntry ::= SEQUENCE { acdPaaUdpCfgID Unsigned32, acdPaaUdpCfgName DisplayString, acdPaaUdpCfgState INTEGER, acdPaaUdpCfgPktSize Unsigned32, acdPaaUdpCfgSamplingPeriod Unsigned32, acdPaaUdpCfgCcLossThresh Unsigned32, acdPaaUdpCfgPktLossRefPeriod Unsigned32, acdPaaUdpCfgPktLossThresh Unsigned32, acdPaaUdpCfgOneWayRefPeriod Unsigned32, acdPaaUdpCfgOneWayDvMax Unsigned32, acdPaaUdpCfgOneWayDvThresh Unsigned32, acdPaaUdpCfgOneWayAvgDvThresh Unsigned32, acdPaaUdpCfgTwoWayRefPeriod Unsigned32, acdPaaUdpCfgTwoWayDelayMax Unsigned32, acdPaaUdpCfgTwoWayDelayThresh Unsigned32, acdPaaUdpCfgTwoWayAvgDelayThresh Unsigned32, acdPaaUdpCfgTwoWayDvMax Unsigned32, acdPaaUdpCfgTwoWayDvThresh Unsigned32, acdPaaUdpCfgTwoWayAvgDvThresh Unsigned32, acdPaaUdpCfgIPv4DstAddr IpAddress, acdPaaUdpCfgPortNumber Unsigned32, acdPaaUdpCfgDscpValue Unsigned32, acdPaaUdpCfgVlan1PbitsValue Unsigned32, acdPaaUdpCfgVlan2PbitsValue Unsigned32, acdPaaUdpCfgOneWayDelayMax Unsigned32, acdPaaUdpCfgOneWayDelayThresh Unsigned32, acdPaaUdpCfgOneWayAvgDelayThresh Unsigned32, acdPaaUdpCfgDestinationPortNumber Unsigned32, acdPaaUdpCfgPeerID Unsigned32, acdPaaUdpCfgOperationMode Unsigned32, acdPaaUdpCfgIgmpOneWayJoinPeriod Unsigned32, acdPaaUdpCfgIgmpRefPeriod Unsigned32, acdPaaUdpCfgIgmpMaxJoinDly Unsigned32, acdPaaUdpCfgIgmpJoinDlyThres Unsigned32, acdPaaUdpCfgIgmpJoinAvgDlyThres Unsigned32, acdPaaUdpCfgIgmpMaxLvDly Unsigned32, acdPaaUdpCfgIgmpLvDlyThresh Unsigned32, acdPaaUdpCfgIgmpLvAvgDlyThresh Unsigned32, acdPaaUdpCfgPktLossThreshExt Unsigned32 } acdPaaUdpCfgID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each PAA instance. This value follows the ordering of the status and the results table. Its value ranges from 1 to MAXINT (4 bytes)." ::= { acdPaaUdpCfgEntry 1 } acdPaaUdpCfgName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is a string to identify this PAA instance." ::= { acdPaaUdpCfgEntry 2 } acdPaaUdpCfgState OBJECT-TYPE SYNTAX INTEGER { enable(0), disable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration state of this PAA entry." ::= { acdPaaUdpCfgEntry 3 } acdPaaUdpCfgPktSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Transmit packet size." ::= { acdPaaUdpCfgEntry 4 } acdPaaUdpCfgSamplingPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Interval in milliseconds at which PAA issues PAA measurement packets." ::= { acdPaaUdpCfgEntry 5 } acdPaaUdpCfgCcLossThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of lost CCM (Connectivity Check Messages) for declaring a connectvity loss." ::= { acdPaaUdpCfgEntry 6 } acdPaaUdpCfgPktLossRefPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reference period in milliseconds for packet loss measurement." ::= { acdPaaUdpCfgEntry 7 } acdPaaUdpCfgPktLossThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Allowed packet loss, in pecentage (%)." ::= { acdPaaUdpCfgEntry 8 } acdPaaUdpCfgOneWayRefPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reference period in milliseconds for one-way measurement." ::= { acdPaaUdpCfgEntry 9 } acdPaaUdpCfgOneWayDvMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum allowed instantaneous delay variation." ::= { acdPaaUdpCfgEntry 10 } acdPaaUdpCfgOneWayDvThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of consecutive delay variations greater than the threshold." ::= { acdPaaUdpCfgEntry 11 } acdPaaUdpCfgOneWayAvgDvThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "One-way average delay variation threshold." ::= { acdPaaUdpCfgEntry 12 } acdPaaUdpCfgTwoWayRefPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reference period in milliseconds for two-way measurement." ::= { acdPaaUdpCfgEntry 13 } acdPaaUdpCfgTwoWayDelayMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum allowed instantaneous delay." ::= { acdPaaUdpCfgEntry 14 } acdPaaUdpCfgTwoWayDelayThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of consecutive delays greater than the threshold." ::= { acdPaaUdpCfgEntry 15 } acdPaaUdpCfgTwoWayAvgDelayThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Two-way average delay threshold." ::= { acdPaaUdpCfgEntry 16 } acdPaaUdpCfgTwoWayDvMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum allowed instantaneous delay variation." ::= { acdPaaUdpCfgEntry 17 } acdPaaUdpCfgTwoWayDvThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of consecutive delay variations greater than the threshold." ::= { acdPaaUdpCfgEntry 18 } acdPaaUdpCfgTwoWayAvgDvThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Two-way average delay variation threshold." ::= { acdPaaUdpCfgEntry 19 } acdPaaUdpCfgIPv4DstAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The destination IP address used to reach the peer PAA instance." ::= { acdPaaUdpCfgEntry 20 } acdPaaUdpCfgPortNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The source UDP port number on which to listen for peer PAA samples." ::= { acdPaaUdpCfgEntry 21 } acdPaaUdpCfgDscpValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The DSCP value used to reach the peer PAA instance. Its value ranges from 0 to 64." ::= { acdPaaUdpCfgEntry 22 } acdPaaUdpCfgVlan1PbitsValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The first VLAN priority used to tag the outgoing traffic. Its value ranges from 0 to 7." ::= { acdPaaUdpCfgEntry 23 } acdPaaUdpCfgVlan2PbitsValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The second VLAN priority used to tag the outgoing traffic. Its value ranges from 0 to 7." ::= { acdPaaUdpCfgEntry 24 } acdPaaUdpCfgOneWayDelayMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum allowed instantaneous delay." ::= { acdPaaUdpCfgEntry 25 } acdPaaUdpCfgOneWayDelayThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Nbr consecutive delay > max before alert." ::= { acdPaaUdpCfgEntry 26 } acdPaaUdpCfgOneWayAvgDelayThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Two-way average delay threshold." ::= { acdPaaUdpCfgEntry 27 } acdPaaUdpCfgDestinationPortNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The destination UDP port number used to reach the peer PAA instance." ::= { acdPaaUdpCfgEntry 28 } acdPaaUdpCfgPeerID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Unique value for the peer PAA instance. This value follows the ordering of the status and the results table. Its value ranges from 1 to MAXINT (4 bytes)." ::= { acdPaaUdpCfgEntry 29 } acdPaaUdpCfgOperationMode OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "PAA Operation Mode. Its values are: 1 = Bi-Dir, 2 = Source, 3 = Sink" ::= { acdPaaUdpCfgEntry 30 } acdPaaUdpCfgIgmpOneWayJoinPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The IGMP One-way join period is the amount of time to wait from the beginning of the period before an IGMP join request is sent out." ::= { acdPaaUdpCfgEntry 31 } acdPaaUdpCfgIgmpRefPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The IGMP reference period is the total amount of time in which we sample IGMP join and leave requests. It must be a minimum of (10 * One-way ref. period)." ::= { acdPaaUdpCfgEntry 32 } acdPaaUdpCfgIgmpMaxJoinDly OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum join delay objective." ::= { acdPaaUdpCfgEntry 33 } acdPaaUdpCfgIgmpJoinDlyThres OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum consecutive join delay samples allowed greater than the maximum join delay." ::= { acdPaaUdpCfgEntry 34 } acdPaaUdpCfgIgmpJoinAvgDlyThres OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum join average delay." ::= { acdPaaUdpCfgEntry 35 } acdPaaUdpCfgIgmpMaxLvDly OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum join delay objective." ::= { acdPaaUdpCfgEntry 36 } acdPaaUdpCfgIgmpLvDlyThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum consecutive leave delay samples allowed greater than the maximum leave delay." ::= { acdPaaUdpCfgEntry 37 } acdPaaUdpCfgIgmpLvAvgDlyThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum leave delay average." ::= { acdPaaUdpCfgEntry 38 } acdPaaUdpCfgPktLossThreshExt OBJECT-TYPE SYNTAX Unsigned32 (0..100000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Extended packet loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%)." DEFVAL { 0 } ::= { acdPaaUdpCfgEntry 39 } --------------------------------------------------------------------------- -- The L2 PAA configuration table -- This table contains all L2 PAA entry configurations. --------------------------------------------------------------------------- acdPaaL2CfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdPaaL2CfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration table of all L2 PAA entries" ::= { acdPaa 4 } acdPaaL2CfgEntry OBJECT-TYPE SYNTAX AcdPaaL2CfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of all settings to manage a PAA instance." INDEX { acdPaaL2CfgID } ::= { acdPaaL2CfgTable 1 } AcdPaaL2CfgEntry ::= SEQUENCE { acdPaaL2CfgID Unsigned32, acdPaaL2CfgName DisplayString, acdPaaL2CfgState INTEGER, acdPaaL2CfgPktSize Unsigned32, acdPaaL2CfgSamplingPeriod Unsigned32, acdPaaL2CfgCcLossThresh Unsigned32, acdPaaL2CfgPktLossRefPeriod Unsigned32, acdPaaL2CfgPktLossThresh Unsigned32, acdPaaL2CfgOneWayRefPeriod Unsigned32, acdPaaL2CfgOneWayDvMax Unsigned32, acdPaaL2CfgOneWayDvThresh Unsigned32, acdPaaL2CfgOneWayAvgDvThresh Unsigned32, acdPaaL2CfgTwoWayRefPeriod Unsigned32, acdPaaL2CfgTwoWayDelayMax Unsigned32, acdPaaL2CfgTwoWayDelayThresh Unsigned32, acdPaaL2CfgTwoWayAvgDelayThresh Unsigned32, acdPaaL2CfgTwoWayDvMax Unsigned32, acdPaaL2CfgTwoWayDvThresh Unsigned32, acdPaaL2CfgTwoWayAvgDvThresh Unsigned32, acdPaaL2CfgPortName DisplayString, acdPaaL2CfgMacDst MacAddress, acdPaaL2CfgEtype Unsigned32, acdPaaL2CfgVlan1IdEn TruthValue, acdPaaL2CfgVlan1Id Unsigned32, acdPaaL2CfgVlan2IdEn TruthValue, acdPaaL2CfgVlan2Id Unsigned32, acdPaaL2CfgVlan1PbitsValue Unsigned32, acdPaaL2CfgVlan2PbitsValue Unsigned32, acdPaaL2CfgOneWayDelayMax Unsigned32, acdPaaL2CfgOneWayDelayThresh Unsigned32, acdPaaL2CfgOneWayAvgDelayThresh Unsigned32, acdPaaL2CfgPeerID Unsigned32, acdPaaL2CfgOperationMode Unsigned32, acdPaaL2CfgPktLossThreshExt Unsigned32 } acdPaaL2CfgID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each PAA instance. This value follows the ordering of the status and the results table. Its value ranges from 1 to MAXINT (4 bytes)." ::= { acdPaaL2CfgEntry 1 } acdPaaL2CfgName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is a string to identify this PAA instance." ::= { acdPaaL2CfgEntry 2 } acdPaaL2CfgState OBJECT-TYPE SYNTAX INTEGER { enable(0), disable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration state of this PAA entry." ::= { acdPaaL2CfgEntry 3 } acdPaaL2CfgPktSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Transmit packet size." ::= { acdPaaL2CfgEntry 4 } acdPaaL2CfgSamplingPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Interval in milliseconds at which PAA issues PAA measurement packets." ::= { acdPaaL2CfgEntry 5 } acdPaaL2CfgCcLossThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of lost CCM (Connectivity Check Messages) for declaring a connectvity loss." ::= { acdPaaL2CfgEntry 6 } acdPaaL2CfgPktLossRefPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reference period in milliseconds for packet loss measurement." ::= { acdPaaL2CfgEntry 7 } acdPaaL2CfgPktLossThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Allowed packet loss, in percentage (%)." ::= { acdPaaL2CfgEntry 8 } acdPaaL2CfgOneWayRefPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reference period in milliseconds for one-way measurement." ::= { acdPaaL2CfgEntry 9 } acdPaaL2CfgOneWayDvMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum allowed instantaneous delay variation." ::= { acdPaaL2CfgEntry 10 } acdPaaL2CfgOneWayDvThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of consecutive delay variations greater than the threshold." ::= { acdPaaL2CfgEntry 11 } acdPaaL2CfgOneWayAvgDvThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "One-way average delay variation threshold." ::= { acdPaaL2CfgEntry 12 } acdPaaL2CfgTwoWayRefPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Reference period in milliseconds for two-way measurement." ::= { acdPaaL2CfgEntry 13 } acdPaaL2CfgTwoWayDelayMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum allowed instantaneous delay." ::= { acdPaaL2CfgEntry 14 } acdPaaL2CfgTwoWayDelayThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of consecutive delays greater than the threshold." ::= { acdPaaL2CfgEntry 15 } acdPaaL2CfgTwoWayAvgDelayThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Two-way average delay threshold." ::= { acdPaaL2CfgEntry 16 } acdPaaL2CfgTwoWayDvMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum allowed instantaneous delay variation." ::= { acdPaaL2CfgEntry 17 } acdPaaL2CfgTwoWayDvThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of consecutive delay variations greater than the threshold." ::= { acdPaaL2CfgEntry 18 } acdPaaL2CfgTwoWayAvgDvThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Two-way average delay variation threshold." ::= { acdPaaL2CfgEntry 19 } acdPaaL2CfgPortName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The Port Name used to reach the peer PAA instance." ::= { acdPaaL2CfgEntry 20 } acdPaaL2CfgMacDst OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address used to reach the peer PAA instance." ::= { acdPaaL2CfgEntry 21 } acdPaaL2CfgEtype OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Ethernet type used for this PAA instance." ::= { acdPaaL2CfgEntry 22 } acdPaaL2CfgVlan1IdEn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the first VLAN ID check" ::= { acdPaaL2CfgEntry 23 } acdPaaL2CfgVlan1Id OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The first VLAN ID used to compare the incoming PAA traffic. Its value ranges from 0 to 4095." ::= { acdPaaL2CfgEntry 24 } acdPaaL2CfgVlan2IdEn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the second VLAN ID check" ::= { acdPaaL2CfgEntry 25 } acdPaaL2CfgVlan2Id OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The second VLAN ID used to compare the incoming PAA traffic. Its value ranges from 0 to 4095." ::= { acdPaaL2CfgEntry 26 } acdPaaL2CfgVlan1PbitsValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The first VLAN priority used to tag the outgoing traffic. Its value ranges from 0 to 7." ::= { acdPaaL2CfgEntry 27 } acdPaaL2CfgVlan2PbitsValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The second VLAN priority used to tag the outgoing traffic. Its value ranges from 0 to 7." ::= { acdPaaL2CfgEntry 28 } acdPaaL2CfgOneWayDelayMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum allowed instantaneous delay." ::= { acdPaaL2CfgEntry 29 } acdPaaL2CfgOneWayDelayThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Nbr consecutive delay > max before alert." ::= { acdPaaL2CfgEntry 30 } acdPaaL2CfgOneWayAvgDelayThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "One-way average delay threshold." ::= { acdPaaL2CfgEntry 31 } acdPaaL2CfgPeerID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Unique value for the peer PAA instance. This value follows the ordering of the status and the results table. Its value ranges from 1 to MAXINT (4 bytes)." ::= { acdPaaL2CfgEntry 32 } acdPaaL2CfgOperationMode OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "PAA Operation Mode. Its values are: 1 = Bi-Dir, 2 = Source, 3 = Sink" ::= { acdPaaL2CfgEntry 33 } acdPaaL2CfgPktLossThreshExt OBJECT-TYPE SYNTAX Unsigned32 (0..100000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Extended packet loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%)." DEFVAL { 0 } ::= { acdPaaL2CfgEntry 34 } ------------------------------------------------------------------------ -- The PAA history Results table -- This table contains all PAA entry results. --------------------------------------------------------------------------- acdPaaHistResultTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdPaaHistResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Result table of all Paa entries" ::= { acdPaa 5 } acdPaaHistResultEntry OBJECT-TYPE SYNTAX AcdPaaHistResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry consisting of results for a PAA instance for a specific periodin time." INDEX { acdPaaHistResultID , acdPaaHistResultSampleIndex } ::= { acdPaaHistResultTable 1 } AcdPaaHistResultEntry ::= SEQUENCE { acdPaaHistResultID Unsigned32, acdPaaHistResultSampleIndex Unsigned32, acdPaaHistResultStatus INTEGER, acdPaaHistResultDuration Unsigned32, acdPaaHistResultIntervalEnd DateAndTime, acdPaaHistResultPktLossNeValid TruthValue, acdPaaHistResultPktLossNeSamples Unsigned32, acdPaaHistResultPktLossNeValue Unsigned32, acdPaaHistResultPktLossFeValid TruthValue, acdPaaHistResultPktLossFeSamples Unsigned32, acdPaaHistResultPktLossFeValue Unsigned32, acdPaaHistResultOneWayDelayValid TruthValue, acdPaaHistResultOneWayDelaySamples Unsigned32, acdPaaHistResultOneWayDelayMinValue Integer32, acdPaaHistResultOneWayDelayMaxValue Integer32, acdPaaHistResultOneWayDelayAvgValue Integer32, acdPaaHistResultOneWayDelayThreshEx Unsigned32, acdPaaHistResultOneWayDvValid TruthValue, acdPaaHistResultOneWayDvSamples Unsigned32, acdPaaHistResultOneWayDvMinValue Integer32, acdPaaHistResultOneWayDvMaxValue Integer32, acdPaaHistResultOneWayDvAvgValue Integer32, acdPaaHistResultOneWayDvThreshEx Unsigned32, acdPaaHistResultTwoWayDelayValid TruthValue, acdPaaHistResultTwoWayDelaySamples Unsigned32, acdPaaHistResultTwoWayDelayMinValue Integer32, acdPaaHistResultTwoWayDelayMaxValue Integer32, acdPaaHistResultTwoWayDelayAvgValue Integer32, acdPaaHistResultTwoWayDelayThreshEx Unsigned32, acdPaaHistResultTwoWayDvValid TruthValue, acdPaaHistResultTwoWayDvSamples Unsigned32, acdPaaHistResultTwoWayDvMinValue Integer32, acdPaaHistResultTwoWayDvMaxValue Integer32, acdPaaHistResultTwoWayDvAvgValue Integer32, acdPaaHistResultTwoWayDvThreshEx Unsigned32, acdPaaHistResultIgmpJoinDelayValid TruthValue, acdPaaHistResultIgmpJoinDelaySamples Unsigned32, acdPaaHistResultIgmpJoinDelayMinValue Integer32, acdPaaHistResultIgmpJoinDelayMaxValue Integer32, acdPaaHistResultIgmpJoinDelayAvgValue Integer32, acdPaaHistResultIgmpJoinDelayThreshEx Unsigned32, acdPaaHistResultIgmpLeaveDelayValid TruthValue, acdPaaHistResultIgmpLeaveDelaySamples Unsigned32, acdPaaHistResultIgmpLeaveDelayMinValue Integer32, acdPaaHistResultIgmpLeaveDelayMaxValue Integer32, acdPaaHistResultIgmpLeaveDelayAvgValue Integer32, acdPaaHistResultIgmpLeaveDelayThreshEx Unsigned32, acdPaaHistResultPktLossNeValueExt Unsigned32, acdPaaHistResultPktLossFeValueExt Unsigned32, acdPaaHistResultPktLossNeNbrLoss Unsigned32, acdPaaHistResultPktLossFeNbrLoss Unsigned32 } acdPaaHistResultID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique value for each PAA instance. Its value ranges from 1 to MAXINT (4 bytes). " ::= { acdPaaHistResultEntry 1 } acdPaaHistResultSampleIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies the particular sample this entry represents among all samples associated with the same PAA instance. This index starts at 1 and increases by one as each new sample." ::= { acdPaaHistResultEntry 2 } acdPaaHistResultStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this acdPaaHistResult entry." ::= { acdPaaHistResultEntry 3 } acdPaaHistResultDuration OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interval in seconds over which the data is sampled for this entry." ::= { acdPaaHistResultEntry 4 } acdPaaHistResultIntervalEnd OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This is the time of the end of this entry." ::= { acdPaaHistResultEntry 5 } acdPaaHistResultPktLossNeValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the Near-end packet loss results during this sampling interval." ::= { acdPaaHistResultEntry 6 } acdPaaHistResultPktLossNeSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate the Near-end packet loss." ::= { acdPaaHistResultEntry 7 } acdPaaHistResultPktLossNeValue OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Near-end packet loss during this sampling interval. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent." ::= { acdPaaHistResultEntry 8 } acdPaaHistResultPktLossFeValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the Far-end packet loss results during this sampling interval." ::= { acdPaaHistResultEntry 9 } acdPaaHistResultPktLossFeSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate the Far-end packet loss." ::= { acdPaaHistResultEntry 10 } acdPaaHistResultPktLossFeValue OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Far-end packet loss during this sampling interval. The packet loss is the percent of packets transmitted but not received of the Ethernet segment in hundredths of a percent." ::= { acdPaaHistResultEntry 11 } acdPaaHistResultOneWayDelayValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the validity of the One-way delay results during this sampling interval." ::= { acdPaaHistResultEntry 12 } acdPaaHistResultOneWayDelaySamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate One-way delay results." ::= { acdPaaHistResultEntry 13 } acdPaaHistResultOneWayDelayMinValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the One-way delay minimum value during this sampling interval. The value is expressed in micro-seconds." ::= { acdPaaHistResultEntry 14 } acdPaaHistResultOneWayDelayMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the One-way delay maximum value during this sampling interval. The value is expressed in micro-seconds." ::= { acdPaaHistResultEntry 15 } acdPaaHistResultOneWayDelayAvgValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the One-way delay average value during this sampling interval. The value is expressed in micro-seconds." ::= { acdPaaHistResultEntry 16 } acdPaaHistResultOneWayDelayThreshEx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the number of sample exceeding the limit during this sampling interval." ::= { acdPaaHistResultEntry 17 } acdPaaHistResultOneWayDvValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the One-way delay variation results during this sampling interval." ::= { acdPaaHistResultEntry 18 } acdPaaHistResultOneWayDvSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate One-way delay variation results." ::= { acdPaaHistResultEntry 19 } acdPaaHistResultOneWayDvMinValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the One-way delay variation minimum value during this sampling interval. The value is expressed in micro-seconds." ::= { acdPaaHistResultEntry 20 } acdPaaHistResultOneWayDvMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the One-way delay variation maximum value during this sampling interval. The value is expressed in micro-seconds." ::= { acdPaaHistResultEntry 21 } acdPaaHistResultOneWayDvAvgValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the One-way delay variation average value during this sampling interval. The value is expressed in micro-seconds." ::= { acdPaaHistResultEntry 22 } acdPaaHistResultOneWayDvThreshEx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples exceeding the limit during this sampling interval." ::= { acdPaaHistResultEntry 23 } acdPaaHistResultTwoWayDelayValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the Two-way delay results during this sampling interval." ::= { acdPaaHistResultEntry 24 } acdPaaHistResultTwoWayDelaySamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate Two-way delay results." ::= { acdPaaHistResultEntry 25 } acdPaaHistResultTwoWayDelayMinValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Two-way delay minimum value during this sampling interval. The value is expressed in micro-seconds." ::= { acdPaaHistResultEntry 26 } acdPaaHistResultTwoWayDelayMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Two-way delay maximum value during this sampling interval. The value is expressed in micro-seconds." ::= { acdPaaHistResultEntry 27 } acdPaaHistResultTwoWayDelayAvgValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Two-way delay average value during this sampling interval. The value is expressed in micro-seconds." ::= { acdPaaHistResultEntry 28 } acdPaaHistResultTwoWayDelayThreshEx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples exceeding the limit during this sampling interval." ::= { acdPaaHistResultEntry 29 } acdPaaHistResultTwoWayDvValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the Two-way delay variation results during this sampling interval." ::= { acdPaaHistResultEntry 30 } acdPaaHistResultTwoWayDvSamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate Two-way delay variation results." ::= { acdPaaHistResultEntry 31 } acdPaaHistResultTwoWayDvMinValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Two-way delay variation minimum value during this sampling interval. The value is expressed in micro-seconds." ::= { acdPaaHistResultEntry 32 } acdPaaHistResultTwoWayDvMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Two-way delay variation maximum value during this sampling interval. The value is expressed in micro-seconds." ::= { acdPaaHistResultEntry 33 } acdPaaHistResultTwoWayDvAvgValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Two-way delay variation average value during this sampling interval. The value is expressed in micro-seconds." ::= { acdPaaHistResultEntry 34 } acdPaaHistResultTwoWayDvThreshEx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples exceeding the limit during this sampling interval." ::= { acdPaaHistResultEntry 35 } acdPaaHistResultIgmpJoinDelayValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the IGMP Join delay results during this sampling interval." ::= { acdPaaHistResultEntry 36 } acdPaaHistResultIgmpJoinDelaySamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate IGMP Join delay results." ::= { acdPaaHistResultEntry 37 } acdPaaHistResultIgmpJoinDelayMinValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the IGMP Join delay minimum value during this sampling interval. The value is expressed in micro-seconds." ::= { acdPaaHistResultEntry 38 } acdPaaHistResultIgmpJoinDelayMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the IGMP Join delay maximum value during this sampling interval. The value is expressed in micro-seconds." ::= { acdPaaHistResultEntry 39 } acdPaaHistResultIgmpJoinDelayAvgValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the IGMP Join delay average value during this sampling interval. The value is expressed in micro-seconds." ::= { acdPaaHistResultEntry 40 } acdPaaHistResultIgmpJoinDelayThreshEx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMP Join samples exceeding the limit during this sampling interval." ::= { acdPaaHistResultEntry 41 } acdPaaHistResultIgmpLeaveDelayValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the IGMP Leave delay results during this sampling interval." ::= { acdPaaHistResultEntry 42 } acdPaaHistResultIgmpLeaveDelaySamples OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of samples gathered during the sampling interval to calculate IGMP Leave delay results." ::= { acdPaaHistResultEntry 43 } acdPaaHistResultIgmpLeaveDelayMinValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the IGMP Leave delay minimum value during this sampling interval. The value is expressed in micro-seconds." ::= { acdPaaHistResultEntry 44 } acdPaaHistResultIgmpLeaveDelayMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the IGMP Leave delay maximum value during this sampling interval. The value is expressed in micro-seconds." ::= { acdPaaHistResultEntry 45 } acdPaaHistResultIgmpLeaveDelayAvgValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the IGMP Leave delay average value during this sampling interval. The value is expressed in micro-seconds." ::= { acdPaaHistResultEntry 46 } acdPaaHistResultIgmpLeaveDelayThreshEx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of IGMP Leave samples exceeding the limit during this sampling interval." ::= { acdPaaHistResultEntry 47 } acdPaaHistResultPktLossNeValueExt OBJECT-TYPE SYNTAX Unsigned32 (0..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Extended near-end packet loss ratio. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%)." ::= { acdPaaHistResultEntry 48 } acdPaaHistResultPktLossFeValueExt OBJECT-TYPE SYNTAX Unsigned32 (0..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Extended far-end packet loss ratio. The packet loss is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%)." ::= { acdPaaHistResultEntry 49 } acdPaaHistResultPktLossNeNbrLoss OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of near-end packet lost for the period. This should be less or equal to acdPaaHistResultPktLossNeSamples." ::= { acdPaaHistResultEntry 50 } acdPaaHistResultPktLossFeNbrLoss OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of far-end packet lost for the period. This should be less or equal to acdPaaHistResultPktLossNeSamples." ::= { acdPaaHistResultEntry 51 } --------------------------------------------------------------------------- -- ACD-PAA-MIB Module - Conformance Information --------------------------------------------------------------------------- acdPaaCompliances OBJECT IDENTIFIER ::= { acdPaaConformance 1 } acdPaaGroups OBJECT IDENTIFIER ::= { acdPaaConformance 2 } --------------------------------------------------------------------------- -- Units of conformance --------------------------------------------------------------------------- acdPaaResultGroup OBJECT-GROUP OBJECTS { acdPaaResultState, acdPaaResultPktLossNeCurrValid, acdPaaResultPktLossNeCurrValue, acdPaaResultPktLossNePrevValid, acdPaaResultPktLossNePrevValue, acdPaaResultPktLossFeCurrValid, acdPaaResultPktLossFeCurrValue, acdPaaResultPktLossFePrevValid, acdPaaResultPktLossFePrevValue, acdPaaResultOneWayDvInstValue, acdPaaResultOneWayDvCurrValid, acdPaaResultOneWayDvCurrMinValue, acdPaaResultOneWayDvCurrMaxValue, acdPaaResultOneWayDvCurrAvgValue, acdPaaResultOneWayDvCurrThreshExc, acdPaaResultOneWayDvPrevValid, acdPaaResultOneWayDvPrevMinValue, acdPaaResultOneWayDvPrevMaxValue, acdPaaResultOneWayDvPrevAvgValue, acdPaaResultOneWayDvPrevThreshEx, acdPaaResultTwoWayDelayInstValue, acdPaaResultTwoWayDelayCurrValid, acdPaaResultTwoWayDelayCurrMinValue, acdPaaResultTwoWayDelayCurrMaxValue, acdPaaResultTwoWayDelayCurrAvgValue, acdPaaResultTwoWayDelayCurrThreshEx, acdPaaResultTwoWayDelayPrevValid, acdPaaResultTwoWayDelayPrevMinValue, acdPaaResultTwoWayDelayPrevMaxValue, acdPaaResultTwoWayDelayPrevAvgValue, acdPaaResultTwoWayDelayPrevThreshEx, acdPaaResultTwoWayDvInstValue, acdPaaResultTwoWayDvCurrValid, acdPaaResultTwoWayDvCurrMinValue, acdPaaResultTwoWayDvCurrMaxValue, acdPaaResultTwoWayDvCurrAvgValue, acdPaaResultTwoWayDvCurrThreshEx, acdPaaResultTwoWayDvPrevValid, acdPaaResultTwoWayDvPrevMinValue, acdPaaResultTwoWayDvPrevMaxValue, acdPaaResultTwoWayDvPrevAvgValue, acdPaaResultTwoWayDvPrevThreshEx, acdPaaResultOneWayDelayInstValue, acdPaaResultOneWayDelayCurrValid, acdPaaResultOneWayDelayCurrMinValue, acdPaaResultOneWayDelayCurrMaxValue, acdPaaResultOneWayDelayCurrAvgValue, acdPaaResultOneWayDelayCurrThreshEx, acdPaaResultOneWayDelayPrevValid, acdPaaResultOneWayDelayPrevMinValue, acdPaaResultOneWayDelayPrevMaxValue, acdPaaResultOneWayDelayPrevAvgValue, acdPaaResultOneWayDelayPrevThreshEx, acdPaaResultPktLossTime, acdPaaResultOneWayTime, acdPaaResultTwoWayTime, acdPaaResultPktLossNeCurrSamples, acdPaaResultPktLossNePrevSamples, acdPaaResultPktLossFeCurrSamples, acdPaaResultPktLossFePrevSamples, acdPaaResultOneWayDelayCurrSamples, acdPaaResultOneWayDelayPrevSamples, acdPaaResultOneWayDvCurrSamples, acdPaaResultOneWayDvPrevSamples, acdPaaResultTwoWayDelayCurrSamples, acdPaaResultTwoWayDelayPrevSamples, acdPaaResultTwoWayDvCurrSamples, acdPaaResultTwoWayDvPrevSamples, acdPaaResultIgmpJoinDelayInstValue, acdPaaResultIgmpJoinDelayCurrValid, acdPaaResultIgmpJoinDelayCurrMinValue, acdPaaResultIgmpJoinDelayCurrMaxValue, acdPaaResultIgmpJoinDelayCurrAvgValue, acdPaaResultIgmpJoinDelayCurrThreshEx, acdPaaResultIgmpJoinDelayPrevValid, acdPaaResultIgmpJoinDelayPrevMinValue, acdPaaResultIgmpJoinDelayPrevMaxValue, acdPaaResultIgmpJoinDelayPrevAvgValue, acdPaaResultIgmpJoinDelayPrevThreshEx, acdPaaResultIgmpLeaveDelayInstValue, acdPaaResultIgmpLeaveDelayCurrValid, acdPaaResultIgmpLeaveDelayCurrMinValue, acdPaaResultIgmpLeaveDelayCurrMaxValue, acdPaaResultIgmpLeaveDelayCurrAvgValue, acdPaaResultIgmpLeaveDelayCurrThreshEx, acdPaaResultIgmpLeaveDelayPrevValid, acdPaaResultIgmpLeaveDelayPrevMinValue, acdPaaResultIgmpLeaveDelayPrevMaxValue, acdPaaResultIgmpLeaveDelayPrevAvgValue, acdPaaResultIgmpLeaveDelayPrevThreshEx, acdPaaResultIgmpJoinDelayTime, acdPaaResultIgmpLeaveDelayTime, acdPaaResultIgmpJoinDelayCurrSamples, acdPaaResultIgmpJoinDelayPrevSamples, acdPaaResultIgmpLeaveDelayCurrSamples, acdPaaResultIgmpLeaveDelayPrevSamples, acdPaaResultPktLossCurrGaps, acdPaaResultPktLossPrevGaps, acdPaaResultPktLossCurrLargestGap, acdPaaResultPktLossPrevLargestGap, acdPaaResultPktLossNeCurrValueExt, acdPaaResultPktLossNePrevValueExt, acdPaaResultPktLossFeCurrValueExt, acdPaaResultPktLossFePrevValueExt, acdPaaResultPktLossNeCurrNbrLoss, acdPaaResultPktLossNePrevNbrLoss, acdPaaResultPktLossFeCurrNbrLoss, acdPaaResultPktLossFePrevNbrLoss } STATUS current DESCRIPTION "Objects for the PAA result Group." ::= { acdPaaGroups 1 } acdPaaStatusGroup OBJECT-GROUP OBJECTS { acdPaaStatusCcAlert, acdPaaStatusPktLossAlert, acdPaaStatusOneWayDelayAlert, acdPaaStatusOneWayAvgDelayAlert, acdPaaStatusOneWayDvAlert, acdPaaStatusOneWayAvgDvAlert, acdPaaStatusTwoWayDelayAlert, acdPaaStatusTwoWayAvgDelayAlert, acdPaaStatusTwoWayDvAlert, acdPaaStatusTwoWayAvgDvAlert, acdPaaStatusState, acdPaaStatusPeerAddress } STATUS current DESCRIPTION "Objects for the PAA status Group." ::= { acdPaaGroups 2 } acdPaaUdpCfgGroup OBJECT-GROUP OBJECTS { acdPaaUdpCfgName, acdPaaUdpCfgState, acdPaaUdpCfgPktSize, acdPaaUdpCfgSamplingPeriod, acdPaaUdpCfgCcLossThresh, acdPaaUdpCfgPktLossRefPeriod, acdPaaUdpCfgPktLossThresh, acdPaaUdpCfgOneWayRefPeriod, acdPaaUdpCfgOneWayDvMax, acdPaaUdpCfgOneWayDvThresh, acdPaaUdpCfgOneWayAvgDvThresh, acdPaaUdpCfgTwoWayRefPeriod, acdPaaUdpCfgTwoWayDelayMax, acdPaaUdpCfgTwoWayDelayThresh, acdPaaUdpCfgTwoWayAvgDelayThresh, acdPaaUdpCfgTwoWayDvMax, acdPaaUdpCfgTwoWayDvThresh, acdPaaUdpCfgTwoWayAvgDvThresh, acdPaaUdpCfgIPv4DstAddr, acdPaaUdpCfgPortNumber, acdPaaUdpCfgDscpValue, acdPaaUdpCfgVlan1PbitsValue, acdPaaUdpCfgVlan2PbitsValue, acdPaaUdpCfgOneWayDelayMax, acdPaaUdpCfgOneWayDelayThresh, acdPaaUdpCfgOneWayAvgDelayThresh, acdPaaUdpCfgDestinationPortNumber, acdPaaUdpCfgPeerID, acdPaaUdpCfgOperationMode, acdPaaUdpCfgIgmpOneWayJoinPeriod, acdPaaUdpCfgIgmpRefPeriod, acdPaaUdpCfgIgmpMaxJoinDly, acdPaaUdpCfgIgmpJoinDlyThres, acdPaaUdpCfgIgmpJoinAvgDlyThres, acdPaaUdpCfgIgmpMaxLvDly, acdPaaUdpCfgIgmpLvDlyThresh, acdPaaUdpCfgIgmpLvAvgDlyThresh, acdPaaUdpCfgPktLossThreshExt } STATUS current DESCRIPTION "Objects for the PAA UDP configuration Group." ::= { acdPaaGroups 3 } acdPaaL2CfgGroup OBJECT-GROUP OBJECTS { acdPaaL2CfgName, acdPaaL2CfgState, acdPaaL2CfgPktSize, acdPaaL2CfgSamplingPeriod, acdPaaL2CfgCcLossThresh, acdPaaL2CfgPktLossRefPeriod, acdPaaL2CfgPktLossThresh, acdPaaL2CfgOneWayRefPeriod, acdPaaL2CfgOneWayDvMax, acdPaaL2CfgOneWayDvThresh, acdPaaL2CfgOneWayAvgDvThresh, acdPaaL2CfgTwoWayRefPeriod, acdPaaL2CfgTwoWayDelayMax, acdPaaL2CfgTwoWayDelayThresh, acdPaaL2CfgTwoWayAvgDelayThresh, acdPaaL2CfgTwoWayDvMax, acdPaaL2CfgTwoWayDvThresh, acdPaaL2CfgTwoWayAvgDvThresh, acdPaaL2CfgPortName, acdPaaL2CfgMacDst, acdPaaL2CfgEtype, acdPaaL2CfgVlan1IdEn, acdPaaL2CfgVlan1Id, acdPaaL2CfgVlan2IdEn, acdPaaL2CfgVlan2Id, acdPaaL2CfgVlan1PbitsValue, acdPaaL2CfgVlan2PbitsValue, acdPaaL2CfgOneWayDelayMax, acdPaaL2CfgOneWayDelayThresh, acdPaaL2CfgOneWayAvgDelayThresh, acdPaaL2CfgPeerID, acdPaaL2CfgOperationMode, acdPaaL2CfgPktLossThreshExt } STATUS current DESCRIPTION "Objects for the PAA L2 configuration Group." ::= { acdPaaGroups 4 } acdPaaHistResultGroup OBJECT-GROUP OBJECTS { acdPaaHistResultStatus, acdPaaHistResultDuration, acdPaaHistResultIntervalEnd, acdPaaHistResultPktLossNeValid, acdPaaHistResultPktLossNeSamples, acdPaaHistResultPktLossNeValue, acdPaaHistResultPktLossFeValid, acdPaaHistResultPktLossFeSamples, acdPaaHistResultPktLossFeValue, acdPaaHistResultOneWayDelayValid, acdPaaHistResultOneWayDelaySamples, acdPaaHistResultOneWayDelayMinValue, acdPaaHistResultOneWayDelayMaxValue, acdPaaHistResultOneWayDelayAvgValue, acdPaaHistResultOneWayDelayThreshEx, acdPaaHistResultOneWayDvValid, acdPaaHistResultOneWayDvSamples, acdPaaHistResultOneWayDvMinValue, acdPaaHistResultOneWayDvMaxValue, acdPaaHistResultOneWayDvAvgValue, acdPaaHistResultOneWayDvThreshEx, acdPaaHistResultTwoWayDelayValid, acdPaaHistResultTwoWayDelaySamples, acdPaaHistResultTwoWayDelayMinValue, acdPaaHistResultTwoWayDelayMaxValue, acdPaaHistResultTwoWayDelayAvgValue, acdPaaHistResultTwoWayDelayThreshEx, acdPaaHistResultTwoWayDvValid, acdPaaHistResultTwoWayDvSamples, acdPaaHistResultTwoWayDvMinValue, acdPaaHistResultTwoWayDvMaxValue, acdPaaHistResultTwoWayDvAvgValue, acdPaaHistResultTwoWayDvThreshEx, acdPaaHistResultIgmpJoinDelayValid, acdPaaHistResultIgmpJoinDelaySamples, acdPaaHistResultIgmpJoinDelayMinValue, acdPaaHistResultIgmpJoinDelayMaxValue, acdPaaHistResultIgmpJoinDelayAvgValue, acdPaaHistResultIgmpJoinDelayThreshEx, acdPaaHistResultIgmpLeaveDelayValid, acdPaaHistResultIgmpLeaveDelaySamples, acdPaaHistResultIgmpLeaveDelayMinValue, acdPaaHistResultIgmpLeaveDelayMaxValue, acdPaaHistResultIgmpLeaveDelayAvgValue, acdPaaHistResultIgmpLeaveDelayThreshEx, acdPaaHistResultPktLossNeValueExt, acdPaaHistResultPktLossFeValueExt, acdPaaHistResultPktLossNeNbrLoss, acdPaaHistResultPktLossFeNbrLoss } STATUS current DESCRIPTION "Objects for the PAA history result Group." ::= { acdPaaGroups 5 } acdPaaCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for support of the ACD-PAA-MIB module." MODULE MANDATORY-GROUPS { acdPaaResultGroup, acdPaaStatusGroup, acdPaaUdpCfgGroup, acdPaaL2CfgGroup, acdPaaHistResultGroup } ::= { acdPaaCompliances 1 } END