-- -- Accedian Enterprise Specific MIB -- -- Copyright (c) 2005-2010, Accedian Networks, Inc. -- All rights reserved. -- -- The contents of this document are subject to change without notice. -- ACD-PORT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter64 FROM SNMPv2-SMI DisplayString, TruthValue, MacAddress FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF acdMibs FROM ACCEDIAN-SMI; acdPort MODULE-IDENTITY LAST-UPDATED "201110100100Z" ORGANIZATION "Accedian Networks, Inc." CONTACT-INFO "Accedian Technical Assistance Center Accedian Networks, Inc. 4878 Levy, suite 202 Saint-Laurent, Quebec Canada H4R 2P1 E-mail: support@accedian.com" DESCRIPTION "The Port statistics for this Accedian Networks device." REVISION "201110100100Z" -- 10 October 2011 DESCRIPTION "Add acdPortConfigTableLastChangeTid." REVISION "201010010100Z" -- 1 October 2010 DESCRIPTION "..." REVISION "200805010100Z" -- 1 May 2008 DESCRIPTION "Initial version of MIB module ACD-PORT-MIB." ::= { acdMibs 9 } acdPortMIBObjects OBJECT IDENTIFIER ::= { acdPort 1 } acdPortConformance OBJECT IDENTIFIER ::= { acdPort 2 } acdPortConfig OBJECT IDENTIFIER ::= { acdPortMIBObjects 1 } acdPortStatus OBJECT IDENTIFIER ::= { acdPortMIBObjects 2 } acdPortStats OBJECT IDENTIFIER ::= { acdPortMIBObjects 3 } acdPortTableTid OBJECT IDENTIFIER ::= { acdPortMIBObjects 4 } ------------------------------------------------------------------------------- -- The port configuration table. -- This table contains all port configuration parameters ------------------------------------------------------------------------------- acdPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of port configuration attributes" ::= { acdPortConfig 1 } acdPortConfigEntry OBJECT-TYPE SYNTAX AcdPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port configuration." INDEX { acdPortConfigIndex } ::= { acdPortConfigTable 1 } AcdPortConfigEntry ::= SEQUENCE { acdPortConfigIndex Unsigned32, acdPortConfigName DisplayString, acdPortConfigAlias DisplayString, acdPortConfigMacAddress MacAddress, acdPortConfigConnectorId OBJECT IDENTIFIER, acdPortConfigState TruthValue, acdPortConfigMtu Unsigned32, acdPortConfigAutoNegoState TruthValue, acdPortConfigSpeed Unsigned32, acdPortConfigDuplex INTEGER, acdPortConfigMdi INTEGER, acdPortConfigPauseMode INTEGER, acdPortConfigAdvertisement BITS } acdPortConfigIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of this object uniquely identifies this acdPortConfig entry." ::= { acdPortConfigEntry 1 } acdPortConfigName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..31)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is a string to identify the port." ::= { acdPortConfigEntry 2 } acdPortConfigAlias OBJECT-TYPE SYNTAX DisplayString (SIZE (1..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This is a string to give the port an alias." ::= { acdPortConfigEntry 3 } acdPortConfigMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the port." ::= { acdPortConfigEntry 4 } acdPortConfigConnectorId OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the connector ID of the port. This object shall identify the acdDescConnectorID object, defined in the ACD-DESC-MIB." ::= { acdPortConfigEntry 5 } acdPortConfigState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the port." ::= { acdPortConfigEntry 6 } acdPortConfigMtu OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The configured MTU of the port. The value ranges from 1518 to 10240." ::= { acdPortConfigEntry 7 } acdPortConfigAutoNegoState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the auto negociation on the port." ::= { acdPortConfigEntry 8 } acdPortConfigSpeed OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The configured speed of the port in Mbps. The valid values are 10, 100, 1000 and 10000." ::= { acdPortConfigEntry 9 } acdPortConfigDuplex OBJECT-TYPE SYNTAX INTEGER { halfDuplex(1), fullDuplex(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The configured duplex mode for this port." ::= { acdPortConfigEntry 10 } acdPortConfigMdi OBJECT-TYPE SYNTAX INTEGER { autoMdi(1), mdi(2), mdix(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The configured MDI mode for this port." ::= { acdPortConfigEntry 11 } acdPortConfigPauseMode OBJECT-TYPE SYNTAX INTEGER { disable(1), local(2), forward(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The configured pause mode for this port." ::= { acdPortConfigEntry 12 } acdPortConfigAdvertisement OBJECT-TYPE SYNTAX BITS { bHalfDuplex10Mbps(0), -- Capable of Half Duplex 10Mbps bFullDuplex10Mbps(1), -- Capable of Full Duplex 10Mbps bHalfDuplex100Mbps(2), -- Capable of Half Duplex 100Mbps bFullDuplex100Mbps(3), -- Capable of Full Duplex 100Mbps bHalfDuplex1Gbps(4), -- Capable of Half Duplex 1Gbps bFullDuplex1Gbps(5), -- Capable of Full Duplex 1Gbps bPauseSymmetric(6), -- Capable of full-duplex pause bPauseAsymmetric(7) -- Capable of asymetric pause } MAX-ACCESS read-write STATUS current DESCRIPTION "A value that identifies the set of port capabilities to advertise during auto-negociation. Each bit indicates whether or not the specific capability is valid on the system." ::= { acdPortConfigEntry 13 } ------------------------------------------------------------------------------- -- The port status table. ------------------------------------------------------------------------------- acdPortStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for port status" ::= { acdPortStatus 1 } acdPortStatusEntry OBJECT-TYPE SYNTAX AcdPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port status." INDEX { acdPortStatusIndex } ::= { acdPortStatusTable 1 } AcdPortStatusEntry ::= SEQUENCE { acdPortStatusIndex Unsigned32, acdPortStatusSpeed Unsigned32, acdPortStatusDuplex INTEGER, acdPortStatusMdi INTEGER, acdPortStatusTxPause TruthValue, acdPortStatusRxPause TruthValue, acdPortStatusLinkPartnerAbility BITS, acdPortStatusLinkStatus TruthValue, acdPortStatusMedia BITS, acdPortStatusIsMonitor TruthValue, acdPortStatusIsManagement TruthValue, acdPortStatusIsSFP TruthValue, acdPortStatusIsFiber TruthValue } acdPortStatusIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of this object uniquely identifies this acdPortStatus entry." ::= { acdPortStatusEntry 1 } acdPortStatusSpeed OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current speed of the port in Mbps. The valid values are 10, 100 1000 and 10000." ::= { acdPortStatusEntry 2 } acdPortStatusDuplex OBJECT-TYPE SYNTAX INTEGER { halfDuplex(1), fullDuplex(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current duplex mode of the port." ::= { acdPortStatusEntry 3 } acdPortStatusMdi OBJECT-TYPE SYNTAX INTEGER { mdi(1), mdix(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current MDI mode of the port." ::= { acdPortStatusEntry 4 } acdPortStatusTxPause OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether or not the port is transmitting pause frames." ::= { acdPortStatusEntry 5 } acdPortStatusRxPause OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether or not the port is receiving pause frames." ::= { acdPortStatusEntry 6 } acdPortStatusLinkPartnerAbility OBJECT-TYPE SYNTAX BITS { bHalfDuplex10Mbps(0), -- Capable of Half Duplex 10Mbps bFullDuplex10Mbps(1), -- Capable of Full Duplex 10Mbps bHalfDuplex100Mbps(2), -- Capable of Half Duplex 100Mbps bFullDuplex100Mbps(3), -- Capable of Full Duplex 100Mbps bHalfDuplex1Gbps(4), -- Capable of Half Duplex 1Gbps bFullDuplex1Gbps(5), -- Capable of Full Duplex 1Gbps bPauseSymmetric(6), -- Capable of full-duplex pause bPauseAsymmetric(7) -- Capable of asymetric pause } MAX-ACCESS read-only STATUS current DESCRIPTION "A value that identifies the set of port capabilities advertised by the link partner. Each bit indicates whether or not the specific capability is valid on the link partner system." ::= { acdPortStatusEntry 7 } acdPortStatusLinkStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the port link is Up or Down. Down(FALSE), Up(TRUE)" ::= { acdPortStatusEntry 8 } acdPortStatusMedia OBJECT-TYPE SYNTAX BITS { bOther(0), -- other or unknown bAUI(1), -- AUI b10base5(2), -- 10BASE-5 bFoirl(3), -- FOIRL b10base2(4), -- 10BASE-2 b10baseT(5), -- 10BASE-T duplex mode unknown b10baseFP(6), -- 10BASE-FP b10baseFB(7), -- 10BASE-FB b10baseFL(8), -- 10BASE-FL duplex mode unknown b10broad36(9), -- 10BROAD36 b10baseTHD(10), -- 10BASE-T half duplex mode b10baseTFD(11), -- 10BASE-T full duplex mode (Supported) b10baseFLHD(12), -- 10BASE-FL half duplex mode b10baseFLFD(13), -- 10BASE-FL full duplex mode b100baseT4(14), -- 100BASE-T4 b100baseTXHD(15), -- 100BASE-TX half duplex mode b100baseTXFD(16), -- 100BASE-TX full duplex mode (Supported) b100baseFXHD(17), -- 100BASE-FX half duplex mode b100baseFXFD(18), -- 100BASE-FX full duplex mode (Supported) b100baseT2HD(19), -- 100BASE-T2 half duplex mode b100baseT2FD(20), -- 100BASE-T2 full duplex mode b1000baseXHD(21), -- 1000BASE-X half duplex mode b1000baseXFD(22), -- 1000BASE-X full duplex mode (Supported) b1000baseLXHD(23), -- 1000BASE-LX half duplex mode b1000baseLXFD(24), -- 1000BASE-LX full duplex mode (Supported) b1000baseSXHD(25), -- 1000BASE-SX half duplex mode b1000baseSXFD(26), -- 1000BASE-SX full duplex mode (Supported) b1000baseCXHD(27), -- 1000BASE-CX half duplex mode b1000baseCXFD(28), -- 1000BASE-CX full duplex mode (Supported) b1000baseTHD(29), -- 1000BASE-T half duplex mode b1000baseTFD(30) -- 1000BASE-T full duplex mode (Supported - Copper SFP) } MAX-ACCESS read-only STATUS current DESCRIPTION "A value that uniquely identifies the selected media type." ::= { acdPortStatusEntry 9 } acdPortStatusIsMonitor OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the port is a monitor port. No(FALSE), Yes(TRUE)" ::= { acdPortStatusEntry 10 } acdPortStatusIsManagement OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the port is a management port. No(FALSE), Yes(TRUE)" ::= { acdPortStatusEntry 11 } acdPortStatusIsSFP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the port has an SFP. No(FALSE), Yes(TRUE)" ::= { acdPortStatusEntry 12 } acdPortStatusIsFiber OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the port is connected to fiber. No(FALSE), Yes(TRUE)" ::= { acdPortStatusEntry 13 } ------------------------------------------------------------------------------- -- The port transmit statistics table. -- This table contains all port transmit statistics. ------------------------------------------------------------------------------- acdPortTxStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdPortTxStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of port transmit statistics" ::= { acdPortStats 1 } acdPortTxStatsEntry OBJECT-TYPE SYNTAX AcdPortTxStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "port transmit statistics." INDEX { acdPortTxStatsIndex } ::= { acdPortTxStatsTable 1 } AcdPortTxStatsEntry ::= SEQUENCE { acdPortTxStatsIndex Unsigned32, acdPortTxStatsSupportBits BITS, acdPortTxStatsBytesGood Counter64, acdPortTxStatsBytesTotal Counter64, acdPortTxStatsUnicastPkts Counter64, acdPortTxStatsMulticastPkts Counter64, acdPortTxStatsBroadcastPkts Counter64, acdPortTxStatsPauseFrames Counter64, acdPortTxStatsTaggedFrames Counter64, acdPortTxStatsCRCErrors Counter64, acdPortTxStatsDeferred Counter64, acdPortTxStatsExcessiveDeferrals Counter64, acdPortTxStatsSingleCollisions Counter64, acdPortTxStatsMultipleCollisions Counter64, acdPortTxStatsExcessiveCollisions Counter64, acdPortTxStatsLateCollisions Counter64, acdPortTxStatsNormalCollisions Counter64, acdPortTxStatsFifoErrors Counter64, acdPortTxStatsPkts64 Counter64, acdPortTxStatsPkts65to127 Counter64, acdPortTxStatsPkts128to255 Counter64, acdPortTxStatsPkts256to511 Counter64, acdPortTxStatsPkts512to1023 Counter64, acdPortTxStatsPkts1024to1518 Counter64, acdPortTxStatsPkts1519to2047 Counter64, acdPortTxStatsPkts2048to4095 Counter64, acdPortTxStatsPkts4096to8191 Counter64, acdPortTxStatsPkts8192andMore Counter64, acdPortTxStatsPktsLarge Counter64 } acdPortTxStatsIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of this object uniquely identifies this acdPortTxStats entry." ::= { acdPortTxStatsEntry 1 } acdPortTxStatsSupportBits OBJECT-TYPE SYNTAX BITS { bBytesGood(0), -- acdPortTxStatsBytesGood validity flag bBytesTotal(1), -- acdPortTxStatsBytesTotal validity flag bUnicastPkts(2), -- acdPortTxStatsUnicastPkts validity flag bMulticastPkts(3), -- acdPortTxStatsMulticastPkts validity flag bBroadcastPkts(4), -- acdPortTxStatsBroadcastPkts validity flag bPauseFrames(5), -- acdPortTxStatsPauseFrames validity flag bTaggedFrames(6), -- acdPortTxStatsTaggedFrames validity flag bCRCErrors(7), -- acdPortTxStatsCRCErrors validity flag bDeferred(8), -- acdPortTxStatsDeferred validity flag bExcessiveDeferrals(9), -- acdPortTxStatsExcessiveDeferrals validity flag bSingleCollisions(10), -- acdPortTxStatsSingleCollisions validity flag bMultipleCollisions(11), -- acdPortTxStatsMultipleCollisions validity flag bExcessiveCollisions(12),-- acdPortTxStatsExcessiveCollisions validity flag bLateCollisions(13), -- acdPortTxStatsLateCollisions validity flag bNormalCollisions(14), -- acdPortTxStatsNormalCollisions validity flag bFifoErrors(15), -- acdPortTxStatsFifoErrors validity flag bPkts64(16), -- acdPortTxStatsPkts64 validity flag bPkts65to127(17), -- acdPortTxStatsPkts65to127 validity flag bPkts128to255(18), -- acdPortTxStatsPkts128to255 validity flag bPkts256to511(19), -- acdPortTxStatsPkts256to511 validity flag bPkts512to1023(20), -- acdPortTxStatsPkts512to1023 validity flag bPkts1024to1518(21), -- acdPortTxStatsPkts1024to1518 validity flag bPkts1519to2047(22), -- acdPortTxStatsPkts1519to2047 validity flag bPkts2048to4095(23), -- acdPortTxStatsPkts2048to4095 validity flag bPkts4096to8191(24), -- acdPortTxStatsPkts4096to8191 validity flag bPkts8192andMore(25), -- acdPortTxStatsPkts8192andMore validity flag bPktsLarge(26) -- acdPortTxStatsPktsLarge validity flag } MAX-ACCESS read-only STATUS current DESCRIPTION "A value that identifies the set of TX statistics supported by the device. Each bit indicates whether or not the specific statistic value is valid on the system." ::= { acdPortTxStatsEntry 2 } acdPortTxStatsBytesGood OBJECT-TYPE SYNTAX Counter64 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of bytes transmitted by the port in good packets. The count includes the 4 CRC bytes but does not include the preamble or SFD bytes. A good packet is one that has been transmitted successfully (not aborted) with a good CRC. It is assumed that all transmit packets are properly sized, 64 bytes (after any padding) to maxsize bytes long." ::= { acdPortTxStatsEntry 3 } acdPortTxStatsBytesTotal OBJECT-TYPE SYNTAX Counter64 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of bytes transmitted by the port in good and bad packets. The count includes the 4 CRC bytes but does not include the preamble or SFD bytes. Bad packets include normal collisions, late collisions, and FIFO underflows. For collisions, all bytes transmitted before the start of the collision as well as the colliding and jam bytes are counted. For FIFO underflows, all bytes actually transmitted are counted." ::= { acdPortTxStatsEntry 4 } acdPortTxStatsUnicastPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the good unicast packets transmitted by this port. Good unicast packets are packets that are not dropped and have a good CRC. Unicast packets are identified by having a 0 in the least significant bit of the first byte of the destination address (i.e. the first bit transmitted is a 0)." ::= { acdPortTxStatsEntry 5 } acdPortTxStatsMulticastPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the good multicast packets transmitted by this port (good means not dropped and valid CRC). Multicast packets are identified by having a 1 in the least significant bit of the first byte of the destination address (i.e. the first bit transmitted is a 1). Broadcast packets are not included in this count." ::= { acdPortTxStatsEntry 6 } acdPortTxStatsBroadcastPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the good broadcast packets transmitted by this port (good means not dropped and valid CRC). Broadcast packets are identified by a destination address of all 1." ::= { acdPortTxStatsEntry 7 } acdPortTxStatsPauseFrames OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the good flow control pause packets transmitted by this port (good means not dropped and valid CRC). Flow control pause packets are identified by a type of 0x8808 and an opcode field of 0x0001." ::= { acdPortTxStatsEntry 8 } acdPortTxStatsTaggedFrames OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the good VLAN packets transmitted by this port (good means not dropped and valid CRC). VLAN packets are identified by a type field equal to 0x8100 in the outer VLAN tag." ::= { acdPortTxStatsEntry 9 } acdPortTxStatsCRCErrors OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the transmitted packets with a bad non-appended CRC field. This count doesn't include any packets with a bad CRC due to a FIFO underflow." ::= { acdPortTxStatsEntry 10 } acdPortTxStatsDeferred OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the number of packets that were deferred on the first transmit attempt due to the medium being busy. Packets with subsequent deferrals (for instance, after a collision back off) are not counted. Whether the packet is eventually transmitted successfully or not is irrelevant to this counter. Packets dropped due to excess deferral that occur during the initial transmit attempt are not counted." ::= { acdPortTxStatsEntry 11 } acdPortTxStatsExcessiveDeferrals OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the number of packets dropped by this port due to excessive deferral. The deferral time starts at the beginning of each transmission attempt and ends when the transmission starts (regardless of collisions). The deferral is excessive if more than 3036 byte times have passed without the transmission starting." ::= { acdPortTxStatsEntry 12 } acdPortTxStatsSingleCollisions OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the number of times a packet is successfully transmitted from this port after experiencing a single collision. This count does not include erroneous (dropped) packets." ::= { acdPortTxStatsEntry 13 } acdPortTxStatsMultipleCollisions OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the number of times a packet is successfully transmitted from this port after experiencing multiple collisions. This count does not include erroneous (dropped) packets and also does not include packets dropped due to excess collisions." ::= { acdPortTxStatsEntry 14 } acdPortTxStatsExcessiveCollisions OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the number of packets dropped by this port due to excess collisions (number of collisions equals MaxRetry+1). This count does not include packets dropped due to FIFO underflow or late collisions (even if the late collision is also an excessive collision)." ::= { acdPortTxStatsEntry 15 } acdPortTxStatsLateCollisions OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the number of packets dropped by this port due to late collisions. A late collision is a collision that occurs after the collision window time (normally 512-bit times). This count does not include packets dropped due to FIFO underflow. Late collisions are not retried." ::= { acdPortTxStatsEntry 16 } acdPortTxStatsNormalCollisions OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of normal collisions that have occurred on this port during all transmission attempts. FIFO underflows, late collisions and collisions that occur while this port is not trying to transmit are not counted. This count does not include collisions during half-duplex back pressure." ::= { acdPortTxStatsEntry 17 } acdPortTxStatsFifoErrors OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the number of packets dropped by this port due to an underflow in the transmit FIFO. When an underflow is detected, transmission is immediately aborted after sending a known bad (inverted) CRC sequence. The FIFO underflow error takes precedence over all other errors if this counter is incremented, then none of the other packet type counters are incremented." ::= { acdPortTxStatsEntry 18 } acdPortTxStatsPkts64 OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, transmitted by this port that were exactly 64 bytes in length (excluding preamble and SFD but including CRC)." ::= { acdPortTxStatsEntry 19 } acdPortTxStatsPkts65to127 OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, transmitted by this port that were 65 to 127 bytes in length inclusive (excluding preamble and SFD but including CRC)." ::= { acdPortTxStatsEntry 20 } acdPortTxStatsPkts128to255 OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, transmitted by this port that were 128 to 255 bytes in length inclusive (excluding preamble and SFD but including CRC)." ::= { acdPortTxStatsEntry 21 } acdPortTxStatsPkts256to511 OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, transmitted by this port that were 256 to 511 bytes in length inclusive (excluding preamble and SFD but including CRC)." ::= { acdPortTxStatsEntry 22 } acdPortTxStatsPkts512to1023 OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, transmitted by this port that were 512 to 1023 bytes in length inclusive (excluding preamble and SFD but including CRC)." ::= { acdPortTxStatsEntry 23 } acdPortTxStatsPkts1024to1518 OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, transmitted by this port that were 1024 to 1518 bytes in length (excluding preamble and SFD but including CRC)." ::= { acdPortTxStatsEntry 24 } acdPortTxStatsPkts1519to2047 OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, transmitted by this port that were 1519 to 2047 bytes in length inclusive (excluding preamble and SFD but including CRC)." ::= { acdPortTxStatsEntry 25 } acdPortTxStatsPkts2048to4095 OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, transmitted by this port that were 2048 to 4095 bytes in length inclusive (excluding preamble and SFD but including CRC)." ::= { acdPortTxStatsEntry 26 } acdPortTxStatsPkts4096to8191 OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, transmitted by this port that were 4096 to 8191 bytes in length inclusive (excluding preamble and SFD but including CRC)." ::= { acdPortTxStatsEntry 27 } acdPortTxStatsPkts8192andMore OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, transmitted by this port that were greater than 8192 bytes in length (excluding preamble and SFD but including CRC)." ::= { acdPortTxStatsEntry 28 } acdPortTxStatsPktsLarge OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of large packets transmitted by this port. Define the size of large packets on the Port configuration." ::= { acdPortTxStatsEntry 29 } ------------------------------------------------------------------------------- -- The port receive statistics table. -- This table contains all port receive statistics. ------------------------------------------------------------------------------- acdPortRxStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AcdPortRxStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of port receive statistics" ::= { acdPortStats 2 } acdPortRxStatsEntry OBJECT-TYPE SYNTAX AcdPortRxStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "port receive statistics." INDEX { acdPortRxStatsIndex } ::= { acdPortRxStatsTable 1 } AcdPortRxStatsEntry ::= SEQUENCE { acdPortRxStatsIndex Unsigned32, acdPortRxStatsSupportBits BITS, acdPortRxStatsBytesGood Counter64, acdPortRxStatsBytesTotal Counter64, acdPortRxStatsShortOk Counter64, acdPortRxStatsShortBad Counter64, acdPortRxStatsLongOk Counter64, acdPortRxStatsLongBad Counter64, acdPortRxStatsUnicastPkts Counter64, acdPortRxStatsMulticastPkts Counter64, acdPortRxStatsBroadcastPkts Counter64, acdPortRxStatsPauseFrames Counter64, acdPortRxStatsTaggedFrames Counter64, acdPortRxStatsCRCErrors Counter64, acdPortRxStatsAlignErrors Counter64, acdPortRxStatsRuntFrames Counter64, acdPortRxStatsLengthErrors Counter64, acdPortRxStatsFalseCRS Counter64, acdPortRxStatsPhyErrors Counter64, acdPortRxStatsFifoErrors Counter64, acdPortRxStatsIgnored Counter64, acdPortRxStatsBadOpcode Counter64, acdPortRxStatsPkts64 Counter64, acdPortRxStatsPkts65to127 Counter64, acdPortRxStatsPkts128to255 Counter64, acdPortRxStatsPkts256to511 Counter64, acdPortRxStatsPkts512to1023 Counter64, acdPortRxStatsPkts1024to1518 Counter64, acdPortRxStatsPkts1519to2047 Counter64, acdPortRxStatsPkts2048to4095 Counter64, acdPortRxStatsPkts4096to8191 Counter64, acdPortRxStatsPkts8192andMore Counter64, acdPortRxStatsPktsLarge Counter64 } acdPortRxStatsIndex OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of this object uniquely identifies this acdPortRxStats entry." ::= { acdPortRxStatsEntry 1 } acdPortRxStatsSupportBits OBJECT-TYPE SYNTAX BITS { bBytesGood(0), -- acdPortRxStatsBytesGood validity flag bBytesTotal(1), -- acdPortRxStatsBytesTotal validity flag bRxStatsShortOk(2), -- acdPortRxStatsShortOkPkts validity flag bRxStatsShortBad(3), -- acdPortRxStatsShortBadPkts validity flag bRxStatsLongOk(4), -- acdPortRxStatsLongOkPkts validity flag bRxStatsLongBad(5), -- acdPortRxStatsLongBadPkts validity flag bUnicastPkts(6), -- acdPortRxStatsUnicastPkts validity flag bMulticastPkts(7), -- acdPortRxStatsMulticastPkts validity flag bBroadcastPkts(8), -- acdPortRxStatsBroadcastPkts validity flag bPauseFrames(9), -- acdPortRxStatsPauseFrames validity flag bTaggedFrames(10), -- acdPortRxStatsTaggedFrames validity flag bCRCErrors(11), -- acdPortRxStatsCRCErrors validity flag bAlignErrors(12), -- acdPortRxStatsAlignErrors validity flag bRuntFrames(13), -- acdPortRxStatsRuntFrames validity flag bLengthErrors(14), -- acdPortRxStatsLengthErrors validity flag bFalseCRS(15), -- acdPortRxStatsFalseCRS validity flag bPhyErrors(16), -- acdPortRxStatsPhyErrors validity flag bFifoErrors(17), -- acdPortRxStatsFifoErrors validity flag bIgnored(18), -- acdPortRxStatsIgnored validity flag bBadOpcode(19), -- acdPortRxStatsBadOpCode validity flag bPkts64(20), -- acdPortRxStatsPkts64 validity flag bPkts65to127(21), -- acdPortRxStatsPkts65to127 validity flag bPkts128to255(22), -- acdPortRxStatsPkts128to255 validity flag bPkts256to511(23), -- acdPortRxStatsPkts256to511 validity flag bPkts512to1023(24), -- acdPortRxStatsPkts512to1023 validity flag bPkts1024to1518(25), -- acdPortRxStatsPkts1024to1518 validity flag bPkts1519to2047(26), -- acdPortRxStatsPkts1519to2047 validity flag bPkts2048to4095(27), -- acdPortRxStatsPkts2048to4095 validity flag bPkts4096to8191(28), -- acdPortRxStatsPkts4096to8191 validity flag bPkts8192andMore(29), -- acdPortRxStatsPkts8192andMore validity flag bPktsLarge(30) -- acdPortRxStatsPktsLarge validity flag } MAX-ACCESS read-only STATUS current DESCRIPTION "A value that identifies the set of RX statistics supported by the device. Each bit indicates whether or not the specific statistic value is valid on the system." ::= { acdPortRxStatsEntry 2 } acdPortRxStatsBytesGood OBJECT-TYPE SYNTAX Counter64 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of bytes received by the port in good packets. The count includes the 4 CRC bytes but does not include the preamble or SFD bytes. A good packet is a well-formed normally sized packet (64 to maxsize bytes) with good CRC and no PHY or FIFO errors." ::= { acdPortRxStatsEntry 3 } acdPortRxStatsBytesTotal OBJECT-TYPE SYNTAX Counter64 UNITS "Octets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the total number of bytes received by the port in good and bad packets. The count includes the 4 CRC bytes (if present) but does not include the preamble or SFD bytes. Good packets are described above. Bad packets include short packets (less than 64 bytes), long packets (greater than maxsize bytes), packets with bad CRC, packets with PHY errors, and packets with receive FIFO errors. Bytes in bad packets resulting from a collision are counted if the SFD is detected." ::= { acdPortRxStatsEntry 4 } acdPortRxStatsShortOk OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of error-free packets received on this port that are shorter than 64 bytes. A packet is error-free if it has a valid CRC, no PHY errorsand no FIFO errors." ::= { acdPortRxStatsEntry 5 } acdPortRxStatsShortBad OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of packets received on this port that are shorter than 64 bytes and have a bad CRC. Packets with PHY or FIFO errors are not counted." ::= { acdPortRxStatsEntry 6 } acdPortRxStatsLongOk OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of error-free packets received on this port that are longer than maxsize bytes. A packet is error-free if it has a valid CRC, no PHY errors and no FIFO errors." ::= { acdPortRxStatsEntry 7 } acdPortRxStatsLongBad OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of packets received on this port that are longer than 64 bytes and have a bad CRC. Packets with PHY or FIFO errors are not counted." ::= { acdPortRxStatsEntry 8 } acdPortRxStatsUnicastPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the good unicast packets received by this port. A good unicast packet is a normally sized packet (64 to maxsize bytes) that is received without error a good CRC, no PHY or FIFO errors. Unicast packets are identified by having a 0 in the least significant bit of the first byte of the destination address (i.e. the first bit received is a 0)." ::= { acdPortRxStatsEntry 9 } acdPortRxStatsMulticastPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the good multicast packets received by this port. A good multicast packet is a normally sized packet (64 to maxsize bytes) that is received without error, a good CRC, no PHY or FIFO errors. Multicast packets are identified by having a 1 in the least significant bit of the first byte of the destination address (i.e. the first bit received is a 1). Broadcast packets are not included in this count." ::= { acdPortRxStatsEntry 10 } acdPortRxStatsBroadcastPkts OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the good broadcast packets received by this port. A good broadcast packet is a normally sized packet (64 to maxsize bytes) that is received without error, a good CRC, no PHY or FIFO errors. Broadcast packets are identified by a destination address of all 1's." ::= { acdPortRxStatsEntry 11 } acdPortRxStatsPauseFrames OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the good flow control pause packets received by this port (good CRC, no PHY or FIFO errors, normally sized). Flow control pause packets are identified by a type of 0x8808, and an opcode field of 0x0001." ::= { acdPortRxStatsEntry 12 } acdPortRxStatsTaggedFrames OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the good VLAN packets receive by this port (good CRC, no PHY or FIFO errors, normally sized). VLAN packets are identified by a type field equal to 0x8100 in the outer VLAN tag." ::= { acdPortRxStatsEntry 13 } acdPortRxStatsCRCErrors OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of normally sized packets (64 to maxsize bytes) received by this port with a CRC error but not a dribbling nibble (packet is an integral number of bytes long). Packets with FIFO or PHY errors are not counted." ::= { acdPortRxStatsEntry 14 } acdPortRxStatsAlignErrors OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of normally sized packets (64 to maxsize bytes) received by this port with a CRC error and a dribbling nibble (packet is not an integral number of bytes long). Packets with PHY or FIFO errors are not counted." ::= { acdPortRxStatsEntry 15 } acdPortRxStatsRuntFrames OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the number of receive packets (or events) detected by this port without SDF detection but with carrier assertion. Packets with valid SFD but no data bytes are also counted as runts. After detecting a runt packet, the update of the RxRunts counter is held off until the next valid packet is received. If multiple runt packets occur between valid packets, the RxRunts counter is incremented only once." ::= { acdPortRxStatsEntry 16 } acdPortRxStatsLengthErrors OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the number of good packets received by this port with a length field check error. A length check error occurs when the value in the length field is within the valid range for data length (3-1500 bytes) but does not match the actual data length of the packet. Length field values less than 46 bytes (which corresponds to the minimum legal packet size of 64 bytes) are not checked due to padding." ::= { acdPortRxStatsEntry 17 } acdPortRxStatsFalseCRS OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the number of receive packets (or events) detected by this port with a false carrier (SSD1 not followed by SSD2). After detecting a false carrier, update of the RxFalseCRS counter is held off until the next valid packet is received. If multiple false carrier events occur between valid packets, the RxFalseCRS counter is incremented only once." ::= { acdPortRxStatsEntry 18 } acdPortRxStatsPhyErrors OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the number of packets received by this port with RX_ER asserted during reception (while RX_DV asserted). Packets with a FIFO error are not counted." ::= { acdPortRxStatsEntry 19 } acdPortRxStatsFifoErrors OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the number of receive packets dropped or aborted due to receive FIFO overflow. The FIFO overflow error takes precedence over all other errors - if this counter is incremented, then none of the other packet type counters is incremented." ::= { acdPortRxStatsEntry 20 } acdPortRxStatsIgnored OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the number of received packets that have been ignored by this port. A packet is ignored if it violates the programmed preamble rules or it violates the minimum data gap. The preamble rules include long preamble enforcement (greater than 23 nibbles) and pure preamble enforcement (only 55h bytes). The minimum data gap is the time between packet data transfers and is measured from immediately after the last CRC byte of the previous packet through the SFD field of the current packet. The normal data gap is 20 bytes long (12 bytes of IPG and 8 bytes of preamble/SFD). The enforcement limit is set to 10 bytes (half the normal gap length)." ::= { acdPortRxStatsEntry 21 } acdPortRxStatsBadOpcode OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "This is a count of the good control packets received by this port (good CRC, no PHY or FIFO errors, normally sized) with an unknown opcode. Unknown control packets are identified by a type field of 88-08 and an opcode field not equal to 00-01." ::= { acdPortRxStatsEntry 22 } acdPortRxStatsPkts64 OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, received by this port that were exactly 64 bytes in length (excluding preamble and SFD but including CRC)." ::= { acdPortRxStatsEntry 23 } acdPortRxStatsPkts65to127 OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, received by this port that were 65 to 127 bytes in length inclusive (excluding preamble and SFD but including CRC)." ::= { acdPortRxStatsEntry 24 } acdPortRxStatsPkts128to255 OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, received by this port that were 128 to 255 bytes in length inclusive (excluding preamble and SFD but including CRC)." ::= { acdPortRxStatsEntry 25 } acdPortRxStatsPkts256to511 OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, received by this port that were 256 to 511 bytes in length inclusive (excluding preamble and SFD but including CRC)." ::= { acdPortRxStatsEntry 26 } acdPortRxStatsPkts512to1023 OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, received by this port that were 512 to 1023 bytes in length inclusive (excluding preamble and SFD but including CRC)." ::= { acdPortRxStatsEntry 27 } acdPortRxStatsPkts1024to1518 OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, received by this port that were 1024 to 1518 bytes in length inclusive (excluding preamble and SFD but including CRC)." ::= { acdPortRxStatsEntry 28 } acdPortRxStatsPkts1519to2047 OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, received by this port that were 1519 to 2047 bytes in length inclusive (excluding preamble and SFD but including CRC)." ::= { acdPortRxStatsEntry 29 } acdPortRxStatsPkts2048to4095 OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, received by this port that were 2048 to 4095 bytes in length inclusive (excluding preamble and SFD but including CRC)." ::= { acdPortRxStatsEntry 30 } acdPortRxStatsPkts4096to8191 OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, received by this port that were 4096 to 8191 bytes in length inclusive (excluding preamble and SFD but including CRC)." ::= { acdPortRxStatsEntry 31 } acdPortRxStatsPkts8192andMore OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets, good or bad, received by this port that were greater than 8192 bytes in length (excluding preamble and SFD but including CRC)." ::= { acdPortRxStatsEntry 32 } acdPortRxStatsPktsLarge OBJECT-TYPE SYNTAX Counter64 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of large packets received by this port. Define the size of large packets on the Port configuration page." ::= { acdPortRxStatsEntry 33 } --------------------------------------------------------------------------- -- Port Transaction ID Information --------------------------------------------------------------------------- acdPortConfigTableLastChangeTid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the transaction ID of the last change of the acdPortConfigTable table. If this value is different since the last read this is indicate a table change." ::= { acdPortTableTid 1 } --------------------------------------------------------------------------- -- ACD-PORT-MIB Module - Conformance Information --------------------------------------------------------------------------- acdPortCompliances OBJECT IDENTIFIER ::= { acdPortConformance 1 } acdPortGroups OBJECT IDENTIFIER ::= { acdPortConformance 2 } --------------------------------------------------------------------------- -- Units of conformance --------------------------------------------------------------------------- acdPortConfigGroup OBJECT-GROUP OBJECTS { acdPortConfigName, acdPortConfigAlias, acdPortConfigMacAddress, acdPortConfigConnectorId, acdPortConfigState, acdPortConfigMtu, acdPortConfigAutoNegoState, acdPortConfigSpeed, acdPortConfigDuplex, acdPortConfigMdi, acdPortConfigPauseMode, acdPortConfigAdvertisement } STATUS current DESCRIPTION "." ::= { acdPortGroups 1 } acdPortStatusGroup OBJECT-GROUP OBJECTS { acdPortStatusSpeed, acdPortStatusDuplex, acdPortStatusMdi, acdPortStatusTxPause, acdPortStatusRxPause, acdPortStatusLinkPartnerAbility, acdPortStatusLinkStatus, acdPortStatusMedia, acdPortStatusIsMonitor, acdPortStatusIsManagement, acdPortStatusIsSFP, acdPortStatusIsFiber } STATUS current DESCRIPTION "." ::= { acdPortGroups 2 } acdPortTxStatsGroup OBJECT-GROUP OBJECTS { acdPortTxStatsSupportBits, acdPortTxStatsBytesGood, acdPortTxStatsBytesTotal, acdPortTxStatsUnicastPkts, acdPortTxStatsMulticastPkts, acdPortTxStatsBroadcastPkts, acdPortTxStatsPauseFrames, acdPortTxStatsTaggedFrames, acdPortTxStatsCRCErrors, acdPortTxStatsDeferred, acdPortTxStatsExcessiveDeferrals, acdPortTxStatsSingleCollisions, acdPortTxStatsMultipleCollisions, acdPortTxStatsExcessiveCollisions, acdPortTxStatsLateCollisions, acdPortTxStatsNormalCollisions, acdPortTxStatsFifoErrors, acdPortTxStatsPkts64, acdPortTxStatsPkts65to127, acdPortTxStatsPkts128to255, acdPortTxStatsPkts256to511, acdPortTxStatsPkts512to1023, acdPortTxStatsPkts1024to1518, acdPortTxStatsPkts1519to2047, acdPortTxStatsPkts2048to4095, acdPortTxStatsPkts4096to8191, acdPortTxStatsPkts8192andMore, acdPortTxStatsPktsLarge } STATUS current DESCRIPTION "." ::= { acdPortGroups 3 } acdPortRxStatsGroup OBJECT-GROUP OBJECTS { acdPortRxStatsSupportBits, acdPortRxStatsBytesGood, acdPortRxStatsBytesTotal, acdPortRxStatsShortOk, acdPortRxStatsShortBad, acdPortRxStatsLongOk, acdPortRxStatsLongBad, acdPortRxStatsUnicastPkts, acdPortRxStatsMulticastPkts, acdPortRxStatsBroadcastPkts, acdPortRxStatsPauseFrames, acdPortRxStatsTaggedFrames, acdPortRxStatsCRCErrors, acdPortRxStatsAlignErrors, acdPortRxStatsRuntFrames, acdPortRxStatsLengthErrors, acdPortRxStatsFalseCRS, acdPortRxStatsPhyErrors, acdPortRxStatsFifoErrors, acdPortRxStatsIgnored, acdPortRxStatsBadOpcode, acdPortRxStatsPkts64, acdPortRxStatsPkts65to127, acdPortRxStatsPkts128to255, acdPortRxStatsPkts256to511, acdPortRxStatsPkts512to1023, acdPortRxStatsPkts1024to1518, acdPortRxStatsPkts1519to2047, acdPortRxStatsPkts2048to4095, acdPortRxStatsPkts4096to8191, acdPortRxStatsPkts8192andMore, acdPortRxStatsPktsLarge } STATUS current DESCRIPTION "." ::= { acdPortGroups 4 } acdPortTidGroup OBJECT-GROUP OBJECTS { acdPortConfigTableLastChangeTid } STATUS current DESCRIPTION "List of scalars to monitior changes in tables." ::= { acdPortGroups 5 } acdPortCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for support of the ACD-PORT-MIB module." MODULE MANDATORY-GROUPS { acdPortConfigGroup, acdPortStatusGroup, acdPortTxStatsGroup, acdPortRxStatsGroup, acdPortTidGroup } ::= { acdPortCompliances 1 } END