ADTRAN-AOS-NETWORKMONITOR DEFINITIONS ::= BEGIN IMPORTS TimeTicks, IpAddress, Integer32, Unsigned32, Counter32, Counter64, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, RowStatus, TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF adIdentity FROM ADTRAN-MIB adGenAOSConformance, adGenAOSRouter FROM ADTRAN-AOS; adGenAOSNetMonMib MODULE-IDENTITY LAST-UPDATED "201010270000Z" -- Oct 27, 2010 / YYYYMMDDHHMMZ ORGANIZATION "ADTRAN, Inc." CONTACT-INFO "Technical Support Dept. Postal: ADTRAN, Inc. 901 Explorer Blvd. Huntsville, AL 35806 Tel: +1 800 726-8663 Fax: +1 256 963 6217 E-mail: support@adtran.com" DESCRIPTION "This MIB contains network monitoring information." REVISION "201010270000Z" -- Oct 27, 2010 / YYYYMMDDHHMMZ DESCRIPTION "Added adGenAOSnmTrackTraps and a limited RO adGenAOSnmTrackTable to allow OID support for the adGenAOSnmTrackStateChgFail and adGenAOSnmTrackStateChgPass trap additions. Changes by Joe Sieja." REVISION "200901200000Z" -- Jan 20, 2009 / YYYYMMDDHHMMZ DESCRIPTION "Added adGenAOSnmICMPTSPktSentCount to the adGenAOSnmICMPTSHistoryTable and adGenAOSnmTwPktSentCount to the adGenAOSnmTwampHistoryTable. Changes by Reba Holland." REVISION "200809300000Z" -- Sept 30, 2008 / YYYYMMDDHHMMZ DESCRIPTION "Added adGenAOSnmICMPTSResponderStatsTable and adGenAOSnmTWAMPResponderStatsTable. These tables will be used to retrieve the statistics available for enabled responders. Changes by Reba Holland." REVISION "200808120000Z" -- Aug 12, 2008 / YYYYMMDDHHMMZ DESCRIPTION "Changed adGenAOSNetMon to use adGenAOSnmIndex in all tables that were using adGenAOSnmName. Added ICMP Timestamp and TWAMP responders. Removed adGenAOSnmICMPTSHistoryIndex and adGenAOSnmTwHistoryIndex from the adGenAOSnmICMPTSHistoryTable and adGenAOSnmTwampHistoryTable. Using adGenAOSnmICMPTsSeqNum and adGenAOSnmTwSeqNum as indices in these tables instead. Added adGenAOSnmProbeTableNextIndex. Changed adGenAOSnmIndex to have a maximum value of 1000. Changes by Reba Holland." REVISION "200806250000Z" -- June 25, 2008 / YYYYMMDDHHMMZ DESCRIPTION "Changed adGenAOSNetMon to be under the adGenAOSRouter tree instead of the adGenAOSCommon tree. Changes by Reba Holland." REVISION "200708230000Z" -- August 23, 2007 DESCRIPTION "First Draft of ADTRAN-AOS-NETWORKMONITOR MIB module." ::= { adIdentity 10000 53 2 2 } adGenAOSNetMon OBJECT IDENTIFIER ::= { adGenAOSRouter 2 } -- ======================================================================== adGenAOSnmTrackTraps OBJECT IDENTIFIER ::= { adGenAOSNetMon 0 } adGenAOSnmProbeTableNextIndex OBJECT-TYPE SYNTAX Integer32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains an unused value for adGenAOSnmIndex in the adGenAOSnmProbeTable, or a zero to indicate that none exist." ::= { adGenAOSNetMon 1 } -- -- Network Monitor Probe Table -- The variables that create a NetMon probe. adGenAOSnmProbeTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenAOSnmProbeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Create a network monitor probe." ::= { adGenAOSNetMon 2 } adGenAOSnmProbeEntry OBJECT-TYPE SYNTAX AdGenAOSnmProbeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parameters for a particular network monitor probe." INDEX { adGenAOSnmIndex } ::= { adGenAOSnmProbeTable 1 } AdGenAOSnmProbeEntry ::= SEQUENCE { adGenAOSnmIndex Integer32, adGenAOSnmName OCTET STRING, adGenAOSnmType INTEGER, adGenAOSnmRowStatus RowStatus } adGenAOSnmIndex OBJECT-TYPE SYNTAX Integer32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Uniquely identifies a row in the adGenAOSnmProbeTable. This is the index chosen by the management station for row creation. If the adGenAOSnmIndex is already in use when attempting to create a new row with a set operation, then an error will be returned." ::= { adGenAOSnmProbeEntry 1 } adGenAOSnmName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "Unique string to identify probe." ::= { adGenAOSnmProbeEntry 2 } adGenAOSnmType OBJECT-TYPE SYNTAX INTEGER { icmpEcho (1), tcpConnect (2), httpRequest (3), icmpTimeStamp (4), twamp (5) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the type of probe." ::= { adGenAOSnmProbeEntry 3 } adGenAOSnmRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "SNMP Version 2 Row Status Variable. The status of the conceptual row. In order for this object to become active, the following row objects MUST be defined: adGenAOSnmName and adGenAOSnmType. The control row objects adGenAOSnmName and adGenAOSnmType cannot be modified once this conceptual row has been created. The value 'notInService' and 'createAndWait' will not be supported. This object can be set to 'destroy' from any value at any time." ::= { adGenAOSnmProbeEntry 4 } -- -- Network Monitor Configure Probe Table -- The variables that configure a NetMon probe. adGenAOSnmConfigProbeTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenAOSnmConfigProbeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure a network monitor probe." ::= { adGenAOSNetMon 3 } adGenAOSnmConfigProbeEntry OBJECT-TYPE SYNTAX AdGenAOSnmConfigProbeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parameters used to configure a particular network monitor probe." INDEX { adGenAOSnmIndex } ::= { adGenAOSnmConfigProbeTable 1 } AdGenAOSnmConfigProbeEntry ::= SEQUENCE { adGenAOSnmCfgName OCTET STRING, adGenAOSnmAdminStatus INTEGER, adGenAOSnmPollPeriod Integer32, adGenAOSnmTimeoutPeriod Unsigned32, adGenAOSnmToleranceMode INTEGER, adGenAOSnmFailTolerance INTEGER, adGenAOSnmPassTolerance INTEGER, adGenAOSnmToleranceTestSize INTEGER, adGenAOSnmClearCounters INTEGER } adGenAOSnmCfgName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the corresponding probe entry. The probe identified by a particular value of this index is the same probe as identified by the same value as a adGenAOSnmName object instance." ::= { adGenAOSnmConfigProbeEntry 1 } adGenAOSnmAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies ability to enable or disable the probe." ::= { adGenAOSnmConfigProbeEntry 2 } adGenAOSnmPollPeriod OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the poll period, in seconds, of the probe." ::= { adGenAOSnmConfigProbeEntry 3 } adGenAOSnmTimeoutPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Time to wait for a response after which a packet is considered lost." ::= { adGenAOSnmConfigProbeEntry 4 } adGenAOSnmToleranceMode OBJECT-TYPE SYNTAX INTEGER { none (1), rate (2), consecutive (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the tolerance mode of the probe." ::= { adGenAOSnmConfigProbeEntry 5 } adGenAOSnmFailTolerance OBJECT-TYPE SYNTAX INTEGER (1..254) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies how many probe operations must fail before the probe state transitions to the fail state." ::= { adGenAOSnmConfigProbeEntry 6 } adGenAOSnmPassTolerance OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies how many probe operations must fail before the probe state transitions to the fail state." ::= { adGenAOSnmConfigProbeEntry 7 } adGenAOSnmToleranceTestSize OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies test size for rate calculations when the tolerance mode is set to 'rate'." ::= { adGenAOSnmConfigProbeEntry 8 } adGenAOSnmClearCounters OBJECT-TYPE SYNTAX INTEGER { clear (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the counters and statistics history of a probe. This is a write-only variable. A read will result in no action being taken." ::= { adGenAOSnmConfigProbeEntry 9 } -- -- Network Monitor Probe Status Table -- The variables that display the status of a NetMon probe. adGenAOSnmProbeStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenAOSnmProbeStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "View the status of a network monitor probe." ::= { adGenAOSNetMon 4 } adGenAOSnmProbeStatusEntry OBJECT-TYPE SYNTAX AdGenAOSnmProbeStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parameters used to view the status of a particular network monitor probe." INDEX { adGenAOSnmIndex } ::= { adGenAOSnmProbeStatusTable 1 } AdGenAOSnmProbeStatusEntry ::= SEQUENCE { adGenAOSnmStatusName OCTET STRING, adGenAOSnmTestStatus INTEGER, adGenAOSnmTestsRun Counter32, adGenAOSnmTestsFailed Counter32, adGenAOSnmStatsToleranceTestSize Counter32, adGenAOSnmStatsToleranceTestValue Counter32, adGenAOSnmTimeSinceLastStatusChange TimeTicks } adGenAOSnmStatusName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the corresponding probe entry. The probe identified by a particular value of this index is the same probe as identified by the same value as a adGenAOSnmName object instance." ::= { adGenAOSnmProbeStatusEntry 1 } adGenAOSnmTestStatus OBJECT-TYPE SYNTAX INTEGER { fail (1), pass (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current test state of the probe." ::= { adGenAOSnmProbeStatusEntry 2 } adGenAOSnmTestsRun OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of test run on the probe." ::= { adGenAOSnmProbeStatusEntry 3 } adGenAOSnmTestsFailed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of test that failed." ::= { adGenAOSnmProbeStatusEntry 4 } adGenAOSnmStatsToleranceTestSize OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the test size." ::= { adGenAOSnmProbeStatusEntry 5 } adGenAOSnmStatsToleranceTestValue OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies number of tests that passed or failed. Check 'adGenAOSnmTestStatus' for test state." ::= { adGenAOSnmProbeStatusEntry 6 } adGenAOSnmTimeSinceLastStatusChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time since last status change." ::= { adGenAOSnmProbeStatusEntry 7 } -- -- Network Monitor Configure TWAMP Probe Table -- Used to configure TWAMP-specific probe parameters. adGenAOSnmCfgTwampProbeTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenAOSnmCfgTwampProbeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure a network monitor TWAMP probe." ::= { adGenAOSNetMon 5 } adGenAOSnmCfgTwampProbeEntry OBJECT-TYPE SYNTAX AdGenAOSnmCfgTwampProbeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parameters used to configure a particular network monitor TWAMP probe." INDEX { adGenAOSnmIndex } ::= { adGenAOSnmCfgTwampProbeTable 1 } AdGenAOSnmCfgTwampProbeEntry ::= SEQUENCE { adGenAOSnmCfgTwName OCTET STRING, adGenAOSnmTwDestHostname DisplayString, adGenAOSnmTwDestPort INTEGER, adGenAOSnmTwSrcIP IpAddress, adGenAOSnmTwSrcPort INTEGER, adGenAOSnmTwDscp INTEGER, adGenAOSnmTwPaddingLen INTEGER, adGenAOSnmTwPaddingFormat INTEGER, adGenAOSnmTwPaddingPattern OCTET STRING, adGenAOSnmTwDataPadType INTEGER, adGenAOSnmTwPktSendCnt INTEGER, adGenAOSnmTwSendScheduleType INTEGER, adGenAOSnmTwSendScheduleValue INTEGER, adGenAOSnmTwIpdvAbsInMinFail Unsigned32, adGenAOSnmTwIpdvAbsInAvgFail Unsigned32, adGenAOSnmTwIpdvAbsInMaxFail Unsigned32, adGenAOSnmTwIpdvAbsInMinPass Unsigned32, adGenAOSnmTwIpdvAbsInAvgPass Unsigned32, adGenAOSnmTwIpdvAbsInMaxPass Unsigned32, adGenAOSnmTwIpdvAbsOutMinFail Unsigned32, adGenAOSnmTwIpdvAbsOutAvgFail Unsigned32, adGenAOSnmTwIpdvAbsOutMaxFail Unsigned32, adGenAOSnmTwIpdvAbsOutMinPass Unsigned32, adGenAOSnmTwIpdvAbsOutAvgPass Unsigned32, adGenAOSnmTwIpdvAbsOutMaxPass Unsigned32, adGenAOSnmTwIpdvAbsRtMinFail Unsigned32, adGenAOSnmTwIpdvAbsRtAvgFail Unsigned32, adGenAOSnmTwIpdvAbsRtMaxFail Unsigned32, adGenAOSnmTwIpdvAbsRtMinPass Unsigned32, adGenAOSnmTwIpdvAbsRtAvgPass Unsigned32, adGenAOSnmTwIpdvAbsRtMaxPass Unsigned32, adGenAOSnmTwDelayInMinFail Integer32, adGenAOSnmTwDelayInAvgFail Integer32, adGenAOSnmTwDelayInMaxFail Integer32, adGenAOSnmTwDelayInMinPass Integer32, adGenAOSnmTwDelayInAvgPass Integer32, adGenAOSnmTwDelayInMaxPass Integer32, adGenAOSnmTwDelayOutMinFail Integer32, adGenAOSnmTwDelayOutAvgFail Integer32, adGenAOSnmTwDelayOutMaxFail Integer32, adGenAOSnmTwDelayOutMinPass Integer32, adGenAOSnmTwDelayOutAvgPass Integer32, adGenAOSnmTwDelayOutMaxPass Integer32, adGenAOSnmTwDelayRtMinFail Integer32, adGenAOSnmTwDelayRtAvgFail Integer32, adGenAOSnmTwDelayRtMaxFail Integer32, adGenAOSnmTwDelayRtMinPass Integer32, adGenAOSnmTwDelayRtAvgPass Integer32, adGenAOSnmTwDelayRtMaxPass Integer32, adGenAOSnmTwPktRtLossFail INTEGER , adGenAOSnmTwPktRtLossPass INTEGER , adGenAOSnmTwHistoryDepth INTEGER } adGenAOSnmCfgTwName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the corresponding TWAMP probe entry. The probe identified by a particular instance of this object is the same probe as identified by the same value as a adGenAOSnmName object instance." ::= { adGenAOSnmCfgTwampProbeEntry 1 } adGenAOSnmTwDestHostname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the destination hostname or IP address as a string in dotted decimal format." ::= { adGenAOSnmCfgTwampProbeEntry 2 } adGenAOSnmTwDestPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the destination port. If zero then the actual destination port will be dynamically negotiated with the responder." ::= { adGenAOSnmCfgTwampProbeEntry 3 } adGenAOSnmTwSrcIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the source IPv4 address." ::= { adGenAOSnmCfgTwampProbeEntry 4 } adGenAOSnmTwSrcPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the source port. If zero then the actual source port will be dynamically assigned ever probe operation." ::= { adGenAOSnmCfgTwampProbeEntry 5 } adGenAOSnmTwDscp OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the DiffServ Code Point value that will be used on packets sent and will be negotiated with the responder." ::= { adGenAOSnmCfgTwampProbeEntry 6 } adGenAOSnmTwPaddingLen OBJECT-TYPE SYNTAX INTEGER (0..1462) MAX-ACCESS read-write STATUS current DESCRIPTION "Size of TWAMP padding length." ::= { adGenAOSnmCfgTwampProbeEntry 7 } adGenAOSnmTwPaddingFormat OBJECT-TYPE SYNTAX INTEGER { ascii (1), hex (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the format of the padding pattern." ::= { adGenAOSnmCfgTwampProbeEntry 8 } adGenAOSnmTwPaddingPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..80)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies data pattern to pad the packet. This can be an ascii or hexadecimal pattern and must match the type set in adGenAOSnmTwPktFormat. In addition, adGenAOSnmTwDataPadType must be set to 'custom'. " ::= { adGenAOSnmCfgTwampProbeEntry 9 } adGenAOSnmTwDataPadType OBJECT-TYPE SYNTAX INTEGER { zeroes (1), random (2), custom (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies how the TWAMP padding payload is filled." ::= { adGenAOSnmCfgTwampProbeEntry 10 } adGenAOSnmTwPktSendCnt OBJECT-TYPE SYNTAX INTEGER (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the number of packets to send and receive for one probe operation. More than one is required for inter-packet delay variation measurements." ::= { adGenAOSnmCfgTwampProbeEntry 11 } adGenAOSnmTwSendScheduleType OBJECT-TYPE SYNTAX INTEGER { periodic (1), poisson (2) -- for future use, not currently supported } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies in milliseconds the time between test packets during a single probe operation." ::= { adGenAOSnmCfgTwampProbeEntry 12 } adGenAOSnmTwSendScheduleValue OBJECT-TYPE SYNTAX INTEGER (5..5000) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies in milliseconds the time between start of each packet send operation." ::= { adGenAOSnmCfgTwampProbeEntry 13 } adGenAOSnmTwIpdvAbsInMinFail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the minimum inbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgTwampProbeEntry 14 } adGenAOSnmTwIpdvAbsInAvgFail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the average inbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgTwampProbeEntry 15 } adGenAOSnmTwIpdvAbsInMaxFail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum inbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgTwampProbeEntry 16 } adGenAOSnmTwIpdvAbsInMinPass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for minimum inbound absolute-value inter-packet delay variation that will allow the probe operation to pass." ::= { adGenAOSnmCfgTwampProbeEntry 17 } adGenAOSnmTwIpdvAbsInAvgPass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for average inbound absolute-value inter-packet delay variation that will allow the probe operation to pass." ::= { adGenAOSnmCfgTwampProbeEntry 18 } adGenAOSnmTwIpdvAbsInMaxPass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for maximum inbound absolute-value inter-packet delay variation that will allow the probe operation to pass." ::= { adGenAOSnmCfgTwampProbeEntry 19 } adGenAOSnmTwIpdvAbsOutMinFail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the minimum outbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgTwampProbeEntry 20 } adGenAOSnmTwIpdvAbsOutAvgFail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the average outbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgTwampProbeEntry 21 } adGenAOSnmTwIpdvAbsOutMaxFail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum outbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgTwampProbeEntry 22 } adGenAOSnmTwIpdvAbsOutMinPass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for minimum outbound absolute-value inter-packet delay variation that will allow the probe operation to pass." ::= { adGenAOSnmCfgTwampProbeEntry 23 } adGenAOSnmTwIpdvAbsOutAvgPass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for average outbound absolute-value inter-packet delay variation that will allow the probe operation to pass." ::= { adGenAOSnmCfgTwampProbeEntry 24 } adGenAOSnmTwIpdvAbsOutMaxPass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for maximum outbound absolute-value inter-packet delay variation that will allow the probe operation to pass." ::= { adGenAOSnmCfgTwampProbeEntry 25 } adGenAOSnmTwIpdvAbsRtMinFail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the minimum round-trip absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgTwampProbeEntry 26 } adGenAOSnmTwIpdvAbsRtAvgFail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the average round-trip absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgTwampProbeEntry 27 } adGenAOSnmTwIpdvAbsRtMaxFail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum round-trip absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgTwampProbeEntry 28 } adGenAOSnmTwIpdvAbsRtMinPass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for minimum round-trip absolute-value inter-packet delay variation that will allow the probe operation to pass." ::= { adGenAOSnmCfgTwampProbeEntry 29 } adGenAOSnmTwIpdvAbsRtAvgPass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for average round-trip absolute-value inter-packet delay variation that will allow the probe operation to pass." ::= { adGenAOSnmCfgTwampProbeEntry 30 } adGenAOSnmTwIpdvAbsRtMaxPass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for maximum round-trip absolute-value inter-packet delay variation that will allow the probe operation to pass." ::= { adGenAOSnmCfgTwampProbeEntry 31 } adGenAOSnmTwDelayInMinFail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the minimum inbound delay threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgTwampProbeEntry 32 } adGenAOSnmTwDelayInAvgFail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the average inbound delay threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgTwampProbeEntry 33 } adGenAOSnmTwDelayInMaxFail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum inbound delay threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgTwampProbeEntry 34 } adGenAOSnmTwDelayInMinPass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for minimum inbound delay that will allow the probe operation to pass." ::= { adGenAOSnmCfgTwampProbeEntry 35 } adGenAOSnmTwDelayInAvgPass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for average inbound delay that will allow the probe operation to pass." ::= { adGenAOSnmCfgTwampProbeEntry 36 } adGenAOSnmTwDelayInMaxPass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for maximum inbound delay that will allow the probe operation to pass." ::= { adGenAOSnmCfgTwampProbeEntry 37 } adGenAOSnmTwDelayOutMinFail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the minimum outbound delay threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgTwampProbeEntry 38 } adGenAOSnmTwDelayOutAvgFail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the average outbound delay threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgTwampProbeEntry 39 } adGenAOSnmTwDelayOutMaxFail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum outbound delay threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgTwampProbeEntry 40 } adGenAOSnmTwDelayOutMinPass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for minimum outbound delay that will allow the probe operation to pass." ::= { adGenAOSnmCfgTwampProbeEntry 41 } adGenAOSnmTwDelayOutAvgPass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for average outbound delay that will allow the probe operation to pass." ::= { adGenAOSnmCfgTwampProbeEntry 42 } adGenAOSnmTwDelayOutMaxPass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for maximum outbound delay that will allow the probe operation to pass." ::= { adGenAOSnmCfgTwampProbeEntry 43 } adGenAOSnmTwDelayRtMinFail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the minimum round-trip delay threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgTwampProbeEntry 44 } adGenAOSnmTwDelayRtAvgFail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the average round-trip delay threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgTwampProbeEntry 45 } adGenAOSnmTwDelayRtMaxFail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum round-trip delay threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgTwampProbeEntry 46 } adGenAOSnmTwDelayRtMinPass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for minimum round-trip delay that will allow the probe operation to pass." ::= { adGenAOSnmCfgTwampProbeEntry 47 } adGenAOSnmTwDelayRtAvgPass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for average round-trip delay that will allow the probe operation to pass." ::= { adGenAOSnmCfgTwampProbeEntry 48 } adGenAOSnmTwDelayRtMaxPass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for maximum round-trip delay that will allow the probe operation to pass." ::= { adGenAOSnmCfgTwampProbeEntry 49 } adGenAOSnmTwPktRtLossFail OBJECT-TYPE SYNTAX INTEGER (0..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the round-trip packet-loss threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgTwampProbeEntry 50 } adGenAOSnmTwPktRtLossPass OBJECT-TYPE SYNTAX INTEGER (0..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the round-trip packet-loss threshold in milliseconds that will allow the probe operation to change to the pass state." ::= { adGenAOSnmCfgTwampProbeEntry 51 } adGenAOSnmTwHistoryDepth OBJECT-TYPE SYNTAX INTEGER (1..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the number of probe operation statistic results to keep." ::= { adGenAOSnmCfgTwampProbeEntry 52 } -- -- Network Monitor TWAMP History Table -- The variables that display the history for a NetMon TWAMP probe. adGenAOSnmTwampHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenAOSnmTwampHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Operation history for a network monitor TWAMP probe." ::= { adGenAOSNetMon 6 } adGenAOSnmTwampHistoryEntry OBJECT-TYPE SYNTAX AdGenAOSnmTwampHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The read-only history of a particular network monitor TWAMP probe." INDEX { adGenAOSnmIndex, adGenAOSnmTwSeqNum } ::= { adGenAOSnmTwampHistoryTable 1 } AdGenAOSnmTwampHistoryEntry ::= SEQUENCE { adGenAOSnmTwSeqNum Integer32, adGenAOSnmTwHistoryName OCTET STRING, adGenAOSnmTwStartTime DisplayString, adGenAOSnmTwEndTime DisplayString, adGenAOSnmTwLocalSyncState TruthValue, adGenAOSnmTwLocalClkErr Counter64, adGenAOSnmTwRemoteSyncState TruthValue, adGenAOSnmTwRemoteClkErr Counter64, adGenAOSnmTwDelayInMin Integer32, adGenAOSnmTwDelayInMax Integer32, adGenAOSnmTwDelayOutMin Integer32, adGenAOSnmTwDelayOutMax Integer32, adGenAOSnmTwDelayRtMin Integer32, adGenAOSnmTwDelayRtMax Integer32, adGenAOSnmTwLossRoundTrip Counter32, adGenAOSnmTwDelayOutSum Integer32, adGenAOSnmTwDelayOutSum2 Counter64, adGenAOSnmTwDelayOutNum Counter32, adGenAOSnmTwDelayInSum Integer32, adGenAOSnmTwDelayInSum2 Counter64, adGenAOSnmTwDelayInNum Counter32, adGenAOSnmTwDelayRtSum Integer32, adGenAOSnmTwDelayRtSum2 Counter64, adGenAOSnmTwDelayRtNum Counter32, adGenAOSnmTwIpvPosInMin Counter32, adGenAOSnmTwIpvPosInMax Counter32, adGenAOSnmTwIpvPosInSum Counter32, adGenAOSnmTwIpvPosInSum2 Counter64, adGenAOSnmTwIpvPosInNum Counter32, adGenAOSnmTwIpvPosOutMin Counter32, adGenAOSnmTwIpvPosOutMax Counter32, adGenAOSnmTwIpvPosOutSum Counter32, adGenAOSnmTwIpvPosOutSum2 Counter64, adGenAOSnmTwIpvPosOutNum Counter32, adGenAOSnmTwIpvPosRtMin Counter32, adGenAOSnmTwIpvPosRtMax Counter32, adGenAOSnmTwIpvPosRtSum Counter32, adGenAOSnmTwIpvPosRtSum2 Counter64, adGenAOSnmTwIpvPosRtNum Counter32, adGenAOSnmTwIpvNegInMin Counter32, adGenAOSnmTwIpvNegInMax Counter32, adGenAOSnmTwIpvNegInSum Counter32, adGenAOSnmTwIpvNegInSum2 Counter64, adGenAOSnmTwIpvNegInNum Counter32, adGenAOSnmTwIpvNegOutMin Counter32, adGenAOSnmTwIpvNegOutMax Counter32, adGenAOSnmTwIpvNegOutSum Counter32, adGenAOSnmTwIpvNegOutSum2 Counter64, adGenAOSnmTwIpvNegOutNum Counter32, adGenAOSnmTwIpvNegRtMin Counter32, adGenAOSnmTwIpvNegRtMax Counter32, adGenAOSnmTwIpvNegRtSum Counter32, adGenAOSnmTwIpvNegRtSum2 Counter64, adGenAOSnmTwIpvNegRtNum Counter32, adGenAOSnmTwIpvAbsInMin Counter32, adGenAOSnmTwIpvAbsInMax Counter32, adGenAOSnmTwIpvAbsInSum Counter32, adGenAOSnmTwIpvAbsInSum2 Counter64, adGenAOSnmTwIpvAbsInNum Counter32, adGenAOSnmTwIpvAbsOutMin Counter32, adGenAOSnmTwIpvAbsOutMax Counter32, adGenAOSnmTwIpvAbsOutSum Counter32, adGenAOSnmTwIpvAbsOutSum2 Counter64, adGenAOSnmTwIpvAbsOutNum Counter32, adGenAOSnmTwIpvAbsRtMin Counter32, adGenAOSnmTwIpvAbsRtMax Counter32, adGenAOSnmTwIpvAbsRtSum Counter32, adGenAOSnmTwIpvAbsRtSum2 Counter64, adGenAOSnmTwIpvAbsRtNum Counter32, adGenAOSnmTwPktSentCount Counter32 } adGenAOSnmTwSeqNum OBJECT-TYPE SYNTAX Integer32 (1..120) MAX-ACCESS read-only STATUS current DESCRIPTION "Along with adGenAOSnmTwHistoryName, uniquely identifies a row in the adGenAOSTwampHistoryTable. A sequence number of '1' signifies the current history entry." ::= { adGenAOSnmTwampHistoryEntry 1 } adGenAOSnmTwHistoryName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the corresponding TWAMP probe entry. The probe identified by a particular value of this object is the same probe as identified by the same value as a adGenAOSnmName object instance." ::= { adGenAOSnmTwampHistoryEntry 2 } adGenAOSnmTwStartTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Date and time the probe operation started." ::= { adGenAOSnmTwampHistoryEntry 3 } adGenAOSnmTwEndTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Date and time the probe operation ended." ::= { adGenAOSnmTwampHistoryEntry 4 } adGenAOSnmTwLocalSyncState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If return value is true, local clock is in sync." ::= { adGenAOSnmTwampHistoryEntry 5 } adGenAOSnmTwLocalClkErr OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Local clock error estimate in nanoseconds." ::= { adGenAOSnmTwampHistoryEntry 6 } adGenAOSnmTwRemoteSyncState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If return value is true, remote clock is in sync." ::= { adGenAOSnmTwampHistoryEntry 7 } adGenAOSnmTwRemoteClkErr OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Remote clock error estimate in nanoseconds." ::= { adGenAOSnmTwampHistoryEntry 8 } adGenAOSnmTwDelayInMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The inbound minimum delay in milliseconds." ::= { adGenAOSnmTwampHistoryEntry 9 } adGenAOSnmTwDelayInMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The inbound maximum delay in milliseconds." ::= { adGenAOSnmTwampHistoryEntry 10 } adGenAOSnmTwDelayOutMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The outbound minimum delay in milliseconds." ::= { adGenAOSnmTwampHistoryEntry 11 } adGenAOSnmTwDelayOutMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The outbound maximum delay in milliseconds." ::= { adGenAOSnmTwampHistoryEntry 12 } adGenAOSnmTwDelayRtMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The round-trip minimum delay in milliseconds." ::= { adGenAOSnmTwampHistoryEntry 13 } adGenAOSnmTwDelayRtMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The round-trip maximum delay in milliseconds." ::= { adGenAOSnmTwampHistoryEntry 14 } adGenAOSnmTwLossRoundTrip OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The round-trip packet loss." ::= { adGenAOSnmTwampHistoryEntry 15 } adGenAOSnmTwDelayOutSum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of outbound delay in milliseconds." ::= { adGenAOSnmTwampHistoryEntry 16 } adGenAOSnmTwDelayOutSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of outbound delay in milliseconds." ::= { adGenAOSnmTwampHistoryEntry 17 } adGenAOSnmTwDelayOutNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of individual outbound delay samples." ::= { adGenAOSnmTwampHistoryEntry 18 } adGenAOSnmTwDelayInSum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of inbound delay in milliseconds." ::= { adGenAOSnmTwampHistoryEntry 19 } adGenAOSnmTwDelayInSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of inbound delay in milliseconds." ::= { adGenAOSnmTwampHistoryEntry 20 } adGenAOSnmTwDelayInNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of individual inbound delay samples." ::= { adGenAOSnmTwampHistoryEntry 21 } adGenAOSnmTwDelayRtSum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of round-trip delay in milliseconds." ::= { adGenAOSnmTwampHistoryEntry 22 } adGenAOSnmTwDelayRtSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of round-trip delay in milliseconds." ::= { adGenAOSnmTwampHistoryEntry 23 } adGenAOSnmTwDelayRtNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of individual round-trip delay samples." ::= { adGenAOSnmTwampHistoryEntry 24 } adGenAOSnmTwIpvPosInMin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value in the set of positive inbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 25 } adGenAOSnmTwIpvPosInMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value in the set of positive inbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 26 } adGenAOSnmTwIpvPosInSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of positive inbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 27 } adGenAOSnmTwIpvPosInSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of positive inbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 28 } adGenAOSnmTwIpvPosInNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of positive inbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 29 } adGenAOSnmTwIpvPosOutMin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value in the set of positive outbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 30 } adGenAOSnmTwIpvPosOutMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value in the set of positive outbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 31 } adGenAOSnmTwIpvPosOutSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of positive outbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 32 } adGenAOSnmTwIpvPosOutSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of positive outbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 33 } adGenAOSnmTwIpvPosOutNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of positive outbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 34 } adGenAOSnmTwIpvPosRtMin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value in the set of positive round-trip inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 35 } adGenAOSnmTwIpvPosRtMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value in the set of positive round-trip inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 36 } adGenAOSnmTwIpvPosRtSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of positive round-trip inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 37 } adGenAOSnmTwIpvPosRtSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of of positive round-trip inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 38 } adGenAOSnmTwIpvPosRtNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of positive round-trip inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 39 } adGenAOSnmTwIpvNegInMin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value in the set of negative inbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 40 } adGenAOSnmTwIpvNegInMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value in the set of negative inbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 41 } adGenAOSnmTwIpvNegInSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of negative inbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 42 } adGenAOSnmTwIpvNegInSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of negative inbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 43 } adGenAOSnmTwIpvNegInNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of negative inbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 44 } adGenAOSnmTwIpvNegOutMin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value in the set of negative outbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 45 } adGenAOSnmTwIpvNegOutMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value in the set of negative outbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 46 } adGenAOSnmTwIpvNegOutSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of negative outbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 47 } adGenAOSnmTwIpvNegOutSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of negative outbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 48 } adGenAOSnmTwIpvNegOutNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of negative outbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 49 } adGenAOSnmTwIpvNegRtMin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value in the set of negative round-trip inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 50 } adGenAOSnmTwIpvNegRtMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value in the set of negative round-trip inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 51 } adGenAOSnmTwIpvNegRtSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of negative round-trip inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 52 } adGenAOSnmTwIpvNegRtSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of negative round-trip inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 53 } adGenAOSnmTwIpvNegRtNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of negative round-trip inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 54 } adGenAOSnmTwIpvAbsInMin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value in the set of absolute inbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 55 } adGenAOSnmTwIpvAbsInMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value in the set of absolute inbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 56 } adGenAOSnmTwIpvAbsInSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of absolute inbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 57 } adGenAOSnmTwIpvAbsInSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of absolute inbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 58 } adGenAOSnmTwIpvAbsInNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of absolute inbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 59 } adGenAOSnmTwIpvAbsOutMin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value in the set of absolute outbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 60 } adGenAOSnmTwIpvAbsOutMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value in the set of absolute outbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 61 } adGenAOSnmTwIpvAbsOutSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of absolute outbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 62 } adGenAOSnmTwIpvAbsOutSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of absolute outbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 63 } adGenAOSnmTwIpvAbsOutNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of absolute outbound inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 64 } adGenAOSnmTwIpvAbsRtMin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value in the set of absolute round-trip inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 65 } adGenAOSnmTwIpvAbsRtMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value in the set of absolute round-trip inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 66 } adGenAOSnmTwIpvAbsRtSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of absolute round-trip inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 67 } adGenAOSnmTwIpvAbsRtSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of absolute round-trip inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 68 } adGenAOSnmTwIpvAbsRtNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of absolute round-trip inter-packet delay variation measurements." ::= { adGenAOSnmTwampHistoryEntry 69 } adGenAOSnmTwPktSentCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets sent." ::= { adGenAOSnmTwampHistoryEntry 70 } -- -- Network Monitor Configure ICMP Timestamp Probe Table -- The variables that configure a NetMon ICMP Timestamp probe. adGenAOSnmCfgICMPTSProbeTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenAOSnmCfgICMPTSProbeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure a network monitor ICMP timestamp probe." ::= { adGenAOSNetMon 7 } adGenAOSnmCfgICMPTSProbeEntry OBJECT-TYPE SYNTAX AdGenAOSnmCfgICMPTSProbeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parameters used to configure a particular network monitor ICMP timestamp probe." INDEX { adGenAOSnmIndex } ::= { adGenAOSnmCfgICMPTSProbeTable 1 } AdGenAOSnmCfgICMPTSProbeEntry ::= SEQUENCE { adGenAOSnmCfgICMPTSName OCTET STRING, adGenAOSnmICMPTSDestHostname DisplayString, adGenAOSnmICMPTSSrcIP IpAddress, adGenAOSnmICMPTSDscp INTEGER, adGenAOSnmICMPTSPaddingLen INTEGER, adGenAOSnmICMPTSPaddingFormat INTEGER, adGenAOSnmICMPTSPaddingPattern OCTET STRING, adGenAOSnmICMPTSDataPadType INTEGER, adGenAOSnmICMPTSPktSendCnt INTEGER, adGenAOSnmICMPTSSendScheduleType INTEGER, adGenAOSnmICMPTSSendScheduleValue INTEGER, adGenAOSnmICMPTSIpdvAbsInMinFail Unsigned32, adGenAOSnmICMPTSIpdvAbsInAvgFail Unsigned32, adGenAOSnmICMPTSIpdvAbsInMaxFail Unsigned32, adGenAOSnmICMPTSIpdvAbsInMinPass Unsigned32, adGenAOSnmICMPTSIpdvAbsInAvgPass Unsigned32, adGenAOSnmICMPTSIpdvAbsInMaxPass Unsigned32, adGenAOSnmICMPTSIpdvAbsOutMinFail Unsigned32, adGenAOSnmICMPTSIpdvAbsOutAvgFail Unsigned32, adGenAOSnmICMPTSIpdvAbsOutMaxFail Unsigned32, adGenAOSnmICMPTSIpdvAbsOutMinPass Unsigned32, adGenAOSnmICMPTSIpdvAbsOutAvgPass Unsigned32, adGenAOSnmICMPTSIpdvAbsOutMaxPass Unsigned32, adGenAOSnmICMPTSIpdvAbsRtMinFail Unsigned32, adGenAOSnmICMPTSIpdvAbsRtAvgFail Unsigned32, adGenAOSnmICMPTSIpdvAbsRtMaxFail Unsigned32, adGenAOSnmICMPTSIpdvAbsRtMinPass Unsigned32, adGenAOSnmICMPTSIpdvAbsRtAvgPass Unsigned32, adGenAOSnmICMPTSIpdvAbsRtMaxPass Unsigned32, adGenAOSnmICMPTSDelayInMinFail Integer32, adGenAOSnmICMPTSDelayInAvgFail Integer32, adGenAOSnmICMPTSDelayInMaxFail Integer32, adGenAOSnmICMPTSDelayInMinPass Integer32, adGenAOSnmICMPTSDelayInAvgPass Integer32, adGenAOSnmICMPTSDelayInMaxPass Integer32, adGenAOSnmICMPTSDelayOutMinFail Integer32, adGenAOSnmICMPTSDelayOutAvgFail Integer32, adGenAOSnmICMPTSDelayOutMaxFail Integer32, adGenAOSnmICMPTSDelayOutMinPass Integer32, adGenAOSnmICMPTSDelayOutAvgPass Integer32, adGenAOSnmICMPTSDelayOutMaxPass Integer32, adGenAOSnmICMPTSDelayRtMinFail Integer32, adGenAOSnmICMPTSDelayRtAvgFail Integer32, adGenAOSnmICMPTSDelayRtMaxFail Integer32, adGenAOSnmICMPTSDelayRtMinPass Integer32, adGenAOSnmICMPTSDelayRtAvgPass Integer32, adGenAOSnmICMPTSDelayRtMaxPass Integer32, adGenAOSnmICMPTSPktRtLossFail INTEGER, adGenAOSnmICMPTSPktRtLossPass INTEGER, adGenAOSnmICMPTSHistoryDepth INTEGER } adGenAOSnmCfgICMPTSName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the corresponding ICMP timestamp probe entry. The probe identified by a particular value of this object is the same probe as identified by the same value as a adGenAOSnmName object instance." ::= { adGenAOSnmCfgICMPTSProbeEntry 1 } adGenAOSnmICMPTSDestHostname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the destination hostname or IP address as a string in dotted decimal format." ::= { adGenAOSnmCfgICMPTSProbeEntry 2 } adGenAOSnmICMPTSSrcIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the source IPv4 address." ::= { adGenAOSnmCfgICMPTSProbeEntry 3 } adGenAOSnmICMPTSDscp OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the DiffServ Code Point value that will be used on packets sent and will be negotiated with the responder." ::= { adGenAOSnmCfgICMPTSProbeEntry 4 } adGenAOSnmICMPTSPaddingLen OBJECT-TYPE SYNTAX INTEGER (0..1462) MAX-ACCESS read-write STATUS current DESCRIPTION "Size of ICMP padding length." ::= { adGenAOSnmCfgICMPTSProbeEntry 5 } adGenAOSnmICMPTSPaddingFormat OBJECT-TYPE SYNTAX INTEGER { ascii (1), hex (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the format of the padding pattern." ::= { adGenAOSnmCfgICMPTSProbeEntry 6 } adGenAOSnmICMPTSPaddingPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..80)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies data pattern to pad the packet. This can be an ascii or hexadecimal pattern and must match the type set in adGenAOSnmICMPTSPktFormat. In addition, adGenAOSnmICMPTSDataPadType must be set to 'custom'. " ::= { adGenAOSnmCfgICMPTSProbeEntry 7 } adGenAOSnmICMPTSDataPadType OBJECT-TYPE SYNTAX INTEGER { zeroes (1), random (2), custom (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies how the ICMP padding paylod is filled." ::= { adGenAOSnmCfgICMPTSProbeEntry 8 } adGenAOSnmICMPTSPktSendCnt OBJECT-TYPE SYNTAX INTEGER (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the number of packets to send and receive for one probe operation. More than one is required for inter-packet delay variation measurements." ::= { adGenAOSnmCfgICMPTSProbeEntry 9 } adGenAOSnmICMPTSSendScheduleType OBJECT-TYPE SYNTAX INTEGER { periodic (1), poisson (2) -- for future use, not currently supported } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies in milliseconds the time between test packets during a single probe operation." ::= { adGenAOSnmCfgICMPTSProbeEntry 10 } adGenAOSnmICMPTSSendScheduleValue OBJECT-TYPE SYNTAX INTEGER (5..5000) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies in milliseconds the time between start of each packet send operation." ::= { adGenAOSnmCfgICMPTSProbeEntry 11 } adGenAOSnmICMPTSIpdvAbsInMinFail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the minimum inbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgICMPTSProbeEntry 12 } adGenAOSnmICMPTSIpdvAbsInAvgFail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the average inbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgICMPTSProbeEntry 13 } adGenAOSnmICMPTSIpdvAbsInMaxFail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum inbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgICMPTSProbeEntry 14 } adGenAOSnmICMPTSIpdvAbsInMinPass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for minimum inbound absolute-value inter-packet delay variation that will allow the probe operation to pass." ::= { adGenAOSnmCfgICMPTSProbeEntry 15 } adGenAOSnmICMPTSIpdvAbsInAvgPass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for average inbound absolute-value inter-packet delay variation that will allow the probe operation to pass." ::= { adGenAOSnmCfgICMPTSProbeEntry 16 } adGenAOSnmICMPTSIpdvAbsInMaxPass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for maximum inbound absolute-value inter-packet delay variation that will allow the probe operation to pass." ::= { adGenAOSnmCfgICMPTSProbeEntry 17 } adGenAOSnmICMPTSIpdvAbsOutMinFail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the minimum outbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgICMPTSProbeEntry 18 } adGenAOSnmICMPTSIpdvAbsOutAvgFail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the average outbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgICMPTSProbeEntry 19 } adGenAOSnmICMPTSIpdvAbsOutMaxFail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum outbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgICMPTSProbeEntry 20 } adGenAOSnmICMPTSIpdvAbsOutMinPass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for minimum outbound absolute-value inter-packet delay variation that will allow the probe operation to pass." ::= { adGenAOSnmCfgICMPTSProbeEntry 21 } adGenAOSnmICMPTSIpdvAbsOutAvgPass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for average outbound absolute-value inter-packet delay variation that will allow the probe operation to pass." ::= { adGenAOSnmCfgICMPTSProbeEntry 22 } adGenAOSnmICMPTSIpdvAbsOutMaxPass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for maximum outbound absolute-value inter-packet delay variation that will allow the probe operation to pass." ::= { adGenAOSnmCfgICMPTSProbeEntry 23 } adGenAOSnmICMPTSIpdvAbsRtMinFail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the minimum round-trip absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgICMPTSProbeEntry 24 } adGenAOSnmICMPTSIpdvAbsRtAvgFail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the average round-trip absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgICMPTSProbeEntry 25 } adGenAOSnmICMPTSIpdvAbsRtMaxFail OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum round-trip absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgICMPTSProbeEntry 26 } adGenAOSnmICMPTSIpdvAbsRtMinPass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for minimum round-trip absolute-value inter-packet delay variation that will allow the probe operation to pass." ::= { adGenAOSnmCfgICMPTSProbeEntry 27 } adGenAOSnmICMPTSIpdvAbsRtAvgPass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for average round-trip absolute-value inter-packet delay variation that will allow the probe operation to pass." ::= { adGenAOSnmCfgICMPTSProbeEntry 28 } adGenAOSnmICMPTSIpdvAbsRtMaxPass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for maximum round-trip absolute-value inter-packet delay variation that will allow the probe operation to pass." ::= { adGenAOSnmCfgICMPTSProbeEntry 29 } adGenAOSnmICMPTSDelayInMinFail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the minimum inbound delay threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgICMPTSProbeEntry 30 } adGenAOSnmICMPTSDelayInAvgFail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the average inbound delay threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgICMPTSProbeEntry 31 } adGenAOSnmICMPTSDelayInMaxFail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum inbound delay threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgICMPTSProbeEntry 32 } adGenAOSnmICMPTSDelayInMinPass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for minimum inbound delay that will allow the probe operation to pass." ::= { adGenAOSnmCfgICMPTSProbeEntry 33 } adGenAOSnmICMPTSDelayInAvgPass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for average inbound delay that will allow the probe operation to pass." ::= { adGenAOSnmCfgICMPTSProbeEntry 34 } adGenAOSnmICMPTSDelayInMaxPass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for maximum inbound delay that will allow the probe operation to pass." ::= { adGenAOSnmCfgICMPTSProbeEntry 35 } adGenAOSnmICMPTSDelayOutMinFail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the minimum outbound delay threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgICMPTSProbeEntry 36 } adGenAOSnmICMPTSDelayOutAvgFail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the average outbound delay threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgICMPTSProbeEntry 37 } adGenAOSnmICMPTSDelayOutMaxFail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum outbound delay threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgICMPTSProbeEntry 38 } adGenAOSnmICMPTSDelayOutMinPass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for minimum outbound delay that will allow the probe operation to pass." ::= { adGenAOSnmCfgICMPTSProbeEntry 39 } adGenAOSnmICMPTSDelayOutAvgPass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for average outbound delay that will allow the probe operation to pass." ::= { adGenAOSnmCfgICMPTSProbeEntry 40 } adGenAOSnmICMPTSDelayOutMaxPass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for maximum outbound delay that will allow the probe operation to pass." ::= { adGenAOSnmCfgICMPTSProbeEntry 41 } adGenAOSnmICMPTSDelayRtMinFail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the minimum round-trip delay threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgICMPTSProbeEntry 42 } adGenAOSnmICMPTSDelayRtAvgFail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the average round-trip delay threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgICMPTSProbeEntry 43 } adGenAOSnmICMPTSDelayRtMaxFail OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum round-trip delay threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgICMPTSProbeEntry 44 } adGenAOSnmICMPTSDelayRtMinPass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for minimum round-trip delay that will allow the probe operation to pass." ::= { adGenAOSnmCfgICMPTSProbeEntry 45 } adGenAOSnmICMPTSDelayRtAvgPass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for average round-trip delay that will allow the probe operation to pass." ::= { adGenAOSnmCfgICMPTSProbeEntry 46 } adGenAOSnmICMPTSDelayRtMaxPass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold in milliseconds for maximum round-trip delay that will allow the probe operation to pass." ::= { adGenAOSnmCfgICMPTSProbeEntry 47 } adGenAOSnmICMPTSPktRtLossFail OBJECT-TYPE SYNTAX INTEGER (0..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the round-trip packet-loss threshold in milliseconds that will cause the probe operation to fail." ::= { adGenAOSnmCfgICMPTSProbeEntry 48 } adGenAOSnmICMPTSPktRtLossPass OBJECT-TYPE SYNTAX INTEGER (0..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the round-trip packet-loss threshold in milliseconds that will allow the probe operation to change to the pass state." ::= { adGenAOSnmCfgICMPTSProbeEntry 49 } adGenAOSnmICMPTSHistoryDepth OBJECT-TYPE SYNTAX INTEGER (1..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the number of probe operation statistic results to keep." ::= { adGenAOSnmCfgICMPTSProbeEntry 50 } -- -- Network Monitor ICMP timestamp History Table -- The variables that display the history for a NetMon ICMP timestamp -- probe. adGenAOSnmICMPTSHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenAOSnmICMPTSHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Operation history for a network monitor ICMP timestamp probe." ::= { adGenAOSNetMon 8 } adGenAOSnmICMPTSHistoryEntry OBJECT-TYPE SYNTAX AdGenAOSnmICMPTSHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The read-only history of a particular network monitor ICMP timestamp probe." INDEX { adGenAOSnmIndex, adGenAOSnmICMPTSSeqNum } ::= { adGenAOSnmICMPTSHistoryTable 1 } AdGenAOSnmICMPTSHistoryEntry ::= SEQUENCE { adGenAOSnmICMPTSSeqNum Integer32, adGenAOSnmICMPTSHistoryName OCTET STRING, adGenAOSnmICMPTSStartTime DisplayString, adGenAOSnmICMPTSEndTime DisplayString, adGenAOSnmICMPTSDelayInMin Integer32, adGenAOSnmICMPTSDelayInMax Integer32, adGenAOSnmICMPTSDelayOutMin Integer32, adGenAOSnmICMPTSDelayOutMax Integer32, adGenAOSnmICMPTSDelayRtMin Integer32, adGenAOSnmICMPTSDelayRtMax Integer32, adGenAOSnmICMPTSLossRoundTrip Counter32, adGenAOSnmICMPTSDelayOutSum Integer32, adGenAOSnmICMPTSDelayOutSum2 Counter64, adGenAOSnmICMPTSDelayOutNum Counter32, adGenAOSnmICMPTSDelayInSum Integer32, adGenAOSnmICMPTSDelayInSum2 Counter64, adGenAOSnmICMPTSDelayInNum Counter32, adGenAOSnmICMPTSDelayRtSum Integer32, adGenAOSnmICMPTSDelayRtSum2 Counter64, adGenAOSnmICMPTSDelayRtNum Counter32, adGenAOSnmICMPTSIpvPosInMin Counter32, adGenAOSnmICMPTSIpvPosInMax Counter32, adGenAOSnmICMPTSIpvPosInSum Counter32, adGenAOSnmICMPTSIpvPosInSum2 Counter64, adGenAOSnmICMPTSIpvPosInNum Counter32, adGenAOSnmICMPTSIpvPosOutMin Counter32, adGenAOSnmICMPTSIpvPosOutMax Counter32, adGenAOSnmICMPTSIpvPosOutSum Counter32, adGenAOSnmICMPTSIpvPosOutSum2 Counter64, adGenAOSnmICMPTSIpvPosOutNum Counter32, adGenAOSnmICMPTSIpvPosRtMin Counter32, adGenAOSnmICMPTSIpvPosRtMax Counter32, adGenAOSnmICMPTSIpvPosRtSum Counter32, adGenAOSnmICMPTSIpvPosRtSum2 Counter64, adGenAOSnmICMPTSIpvPosRtNum Counter32, adGenAOSnmICMPTSIpvNegInMin Counter32, adGenAOSnmICMPTSIpvNegInMax Counter32, adGenAOSnmICMPTSIpvNegInSum Counter32, adGenAOSnmICMPTSIpvNegInSum2 Counter64, adGenAOSnmICMPTSIpvNegInNum Counter32, adGenAOSnmICMPTSIpvNegOutMin Counter32, adGenAOSnmICMPTSIpvNegOutMax Counter32, adGenAOSnmICMPTSIpvNegOutSum Counter32, adGenAOSnmICMPTSIpvNegOutSum2 Counter64, adGenAOSnmICMPTSIpvNegOutNum Counter32, adGenAOSnmICMPTSIpvNegRtMin Counter32, adGenAOSnmICMPTSIpvNegRtMax Counter32, adGenAOSnmICMPTSIpvNegRtSum Counter32, adGenAOSnmICMPTSIpvNegRtSum2 Counter64, adGenAOSnmICMPTSIpvNegRtNum Counter32, adGenAOSnmICMPTSIpvAbsInMin Counter32, adGenAOSnmICMPTSIpvAbsInMax Counter32, adGenAOSnmICMPTSIpvAbsInSum Counter32, adGenAOSnmICMPTSIpvAbsInSum2 Counter64, adGenAOSnmICMPTSIpvAbsInNum Counter32, adGenAOSnmICMPTSIpvAbsOutMin Counter32, adGenAOSnmICMPTSIpvAbsOutMax Counter32, adGenAOSnmICMPTSIpvAbsOutSum Counter32, adGenAOSnmICMPTSIpvAbsOutSum2 Counter64, adGenAOSnmICMPTSIpvAbsOutNum Counter32, adGenAOSnmICMPTSIpvAbsRtMin Counter32, adGenAOSnmICMPTSIpvAbsRtMax Counter32, adGenAOSnmICMPTSIpvAbsRtSum Counter32, adGenAOSnmICMPTSIpvAbsRtSum2 Counter64, adGenAOSnmICMPTSIpvAbsRtNum Counter32, adGenAOSnmICMPTSPktSentCount Counter32 } adGenAOSnmICMPTSSeqNum OBJECT-TYPE SYNTAX Integer32 (1..120) MAX-ACCESS read-only STATUS current DESCRIPTION "Along with adGenAOSnmICMPTSHistoryName, uniquely identifies a row in the adGenAOSnmICMPTSHistoryTable. A sequence number of '1' signifies the current history entry." ::= { adGenAOSnmICMPTSHistoryEntry 1 } adGenAOSnmICMPTSHistoryName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the corresponding ICMP timestamp probe entry. The probe identified by a particular value of this object is the same probe as identified by the same value as a adGenAOSnmName object instance." ::= { adGenAOSnmICMPTSHistoryEntry 2 } adGenAOSnmICMPTSStartTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time the probe operation started." ::= { adGenAOSnmICMPTSHistoryEntry 3 } adGenAOSnmICMPTSEndTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time the probe operation ended." ::= { adGenAOSnmICMPTSHistoryEntry 4 } adGenAOSnmICMPTSDelayInMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The inbound minimum delay in milliseconds." ::= { adGenAOSnmICMPTSHistoryEntry 5 } adGenAOSnmICMPTSDelayInMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The inbound maximum delay in milliseconds." ::= { adGenAOSnmICMPTSHistoryEntry 6 } adGenAOSnmICMPTSDelayOutMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The outbound minimum delay in milliseconds." ::= { adGenAOSnmICMPTSHistoryEntry 7 } adGenAOSnmICMPTSDelayOutMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The outbound maximum delay in milliseconds." ::= { adGenAOSnmICMPTSHistoryEntry 8 } adGenAOSnmICMPTSDelayRtMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The round-trip minimum delay in milliseconds." ::= { adGenAOSnmICMPTSHistoryEntry 9 } adGenAOSnmICMPTSDelayRtMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The round-trip maximum delay in milliseconds." ::= { adGenAOSnmICMPTSHistoryEntry 10 } adGenAOSnmICMPTSLossRoundTrip OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The round-trip packet loss." ::= { adGenAOSnmICMPTSHistoryEntry 11 } adGenAOSnmICMPTSDelayOutSum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of outbound delay in milliseconds." ::= { adGenAOSnmICMPTSHistoryEntry 12 } adGenAOSnmICMPTSDelayOutSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of outbound delay in milliseconds." ::= { adGenAOSnmICMPTSHistoryEntry 13 } adGenAOSnmICMPTSDelayOutNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of individual outbound delay samples." ::= { adGenAOSnmICMPTSHistoryEntry 14 } adGenAOSnmICMPTSDelayInSum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of inbound delay in milliseconds." ::= { adGenAOSnmICMPTSHistoryEntry 15 } adGenAOSnmICMPTSDelayInSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of inbound delay in milliseconds." ::= { adGenAOSnmICMPTSHistoryEntry 16 } adGenAOSnmICMPTSDelayInNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of individual inbound delay samples." ::= { adGenAOSnmICMPTSHistoryEntry 17 } adGenAOSnmICMPTSDelayRtSum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of round-trip delay in milliseconds." ::= { adGenAOSnmICMPTSHistoryEntry 18 } adGenAOSnmICMPTSDelayRtSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of round-trip delay in milliseconds." ::= { adGenAOSnmICMPTSHistoryEntry 19 } adGenAOSnmICMPTSDelayRtNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of individual round-trip delay samples." ::= { adGenAOSnmICMPTSHistoryEntry 20 } adGenAOSnmICMPTSIpvPosInMin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value in the set of positive inbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 21 } adGenAOSnmICMPTSIpvPosInMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value in the set of positive inbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 22 } adGenAOSnmICMPTSIpvPosInSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of positive inbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 23 } adGenAOSnmICMPTSIpvPosInSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of positive inbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 24 } adGenAOSnmICMPTSIpvPosInNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of positive inbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 25 } adGenAOSnmICMPTSIpvPosOutMin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value in the set of positive outbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 26 } adGenAOSnmICMPTSIpvPosOutMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value in the set of positive outbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 27 } adGenAOSnmICMPTSIpvPosOutSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of positive outbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 28 } adGenAOSnmICMPTSIpvPosOutSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of positive outbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 29 } adGenAOSnmICMPTSIpvPosOutNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of positive outbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 30 } adGenAOSnmICMPTSIpvPosRtMin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value in the set of positive round-trip inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 31 } adGenAOSnmICMPTSIpvPosRtMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value in the set of positive round-trip inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 32 } adGenAOSnmICMPTSIpvPosRtSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of positive round-trip inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 33 } adGenAOSnmICMPTSIpvPosRtSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of positive round-trip inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 34 } adGenAOSnmICMPTSIpvPosRtNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of positive round-trip inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 35 } adGenAOSnmICMPTSIpvNegInMin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value in the set of negative inbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 36 } adGenAOSnmICMPTSIpvNegInMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value in the set of negative inbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 37 } adGenAOSnmICMPTSIpvNegInSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of negative inbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 38 } adGenAOSnmICMPTSIpvNegInSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of negative inbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 39 } adGenAOSnmICMPTSIpvNegInNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of negative inbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 40 } adGenAOSnmICMPTSIpvNegOutMin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value in the set of negative outbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 41 } adGenAOSnmICMPTSIpvNegOutMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value in the set of negative outbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 42 } adGenAOSnmICMPTSIpvNegOutSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of negative outbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 43 } adGenAOSnmICMPTSIpvNegOutSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of negative outbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 44 } adGenAOSnmICMPTSIpvNegOutNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of negative outbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 45 } adGenAOSnmICMPTSIpvNegRtMin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value in the set of negative round-trip inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 46 } adGenAOSnmICMPTSIpvNegRtMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value in the set of negative round-trip inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 47 } adGenAOSnmICMPTSIpvNegRtSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of negative round-trip inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 48 } adGenAOSnmICMPTSIpvNegRtSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of negative round-trip inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 49 } adGenAOSnmICMPTSIpvNegRtNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of negative round-trip inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 50 } adGenAOSnmICMPTSIpvAbsInMin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value in the set of absolute inbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 51 } adGenAOSnmICMPTSIpvAbsInMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value in the set of absolute inbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 52 } adGenAOSnmICMPTSIpvAbsInSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of absolute inbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 53 } adGenAOSnmICMPTSIpvAbsInSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of absolute inbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 54 } adGenAOSnmICMPTSIpvAbsInNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of absolute inbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 55 } adGenAOSnmICMPTSIpvAbsOutMin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value in the set of absolute outbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 56 } adGenAOSnmICMPTSIpvAbsOutMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value in the set of absolute outbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 57 } adGenAOSnmICMPTSIpvAbsOutSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of absolute outbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 58 } adGenAOSnmICMPTSIpvAbsOutSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of absolute outbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 59 } adGenAOSnmICMPTSIpvAbsOutNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of absolute outbound inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 60 } adGenAOSnmICMPTSIpvAbsRtMin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum value in the set of absolute round-trip inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 61 } adGenAOSnmICMPTSIpvAbsRtMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum value in the set of absolute round-trip inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 62 } adGenAOSnmICMPTSIpvAbsRtSum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of absolute round-trip inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 63 } adGenAOSnmICMPTSIpvAbsRtSum2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of the squares of absolute round-trip inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 64 } adGenAOSnmICMPTSIpvAbsRtNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of absolute round-trip inter-packet delay variation measurements." ::= { adGenAOSnmICMPTSHistoryEntry 65 } adGenAOSnmICMPTSPktSentCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets sent." ::= { adGenAOSnmICMPTSHistoryEntry 66 } -- -- Network Monitor ICMP Timestamp Responder. -- adGenAOSnmICMPTSResponder OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies ability to enable or disable the ICMP Timstamp responder to respond to ICMP timestamp requests." ::= { adGenAOSNetMon 9 } -- -- Network Monitor TWAMP Responder. -- adGenAOSnmTWAMPResponder OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies ability to enable or disable the TWAMP responder to respond to ICMP timestamp requests." ::= { adGenAOSNetMon 10 } -- -- Network Monitor ICMP timestamp Responder Statistics Table -- The variables that display the statistics for a NetMon ICMP timestamp -- responder. adGenAOSnmICMPTSResponderStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenAOSnmICMPTSResponderStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Operation history for a network monitor ICMP timestamp probe." ::= { adGenAOSNetMon 11 } adGenAOSnmICMPTSResponderStatsEntry OBJECT-TYPE SYNTAX AdGenAOSnmICMPTSResponderStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The read-only statistics of the network monitor ICMP timestamp responder." INDEX { adGenAOSnmICMPTSResponderStatsIndex } ::= { adGenAOSnmICMPTSResponderStatsTable 1 } AdGenAOSnmICMPTSResponderStatsEntry ::= SEQUENCE { adGenAOSnmICMPTSResponderStatsIndex Unsigned32, adGenAOSnmICMPTSResponderPacketsReceived Counter32, adGenAOSnmICMPTSResponderPacketsSent Counter32, adGenAOSnmClearICMPTSResponderCounters INTEGER } adGenAOSnmICMPTSResponderStatsIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Uniquely identifies a row in the adGenAOSnmICMPTSResponderStatsTable." ::= { adGenAOSnmICMPTSResponderStatsEntry 1 } adGenAOSnmICMPTSResponderPacketsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets received by the responder." ::= { adGenAOSnmICMPTSResponderStatsEntry 2 } adGenAOSnmICMPTSResponderPacketsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets sent by the responder." ::= { adGenAOSnmICMPTSResponderStatsEntry 3 } adGenAOSnmClearICMPTSResponderCounters OBJECT-TYPE SYNTAX INTEGER { clear (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the counters of the ICMP timestamp responder. This is a write-only variable. A read will result in no action being taken." ::= { adGenAOSnmICMPTSResponderStatsEntry 4 } -- -- Network Monitor TWAMP Responder Statistics Table -- The variables that display the statistics for a NetMon TWAMP -- responder. adGenAOSnmTwampResponderStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenAOSnmTwampResponderStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Operation history for a network monitor TWAMP probe." ::= { adGenAOSNetMon 12 } adGenAOSnmTwampResponderStatsEntry OBJECT-TYPE SYNTAX AdGenAOSnmTwampResponderStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The read-only statistics of the network monitor TWAMP responder." INDEX { adGenAOSnmTwampResponderStatsIndex } ::= { adGenAOSnmTwampResponderStatsTable 1 } AdGenAOSnmTwampResponderStatsEntry ::= SEQUENCE { adGenAOSnmTwampResponderStatsIndex Unsigned32, adGenAOSnmTwampResponderPacketsReceived Counter32, adGenAOSnmTwampResponderPacketsSent Counter32, adGenAOSnmTwampResponderSessionClosed Counter32, adGenAOSnmTwampResponderSessionOpened Counter32, adGenAOSnmTwampResponderSessionRejected Counter32, adGenAOSnmClearTwampResponderCounters INTEGER } adGenAOSnmTwampResponderStatsIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Uniquely identifies a row in the adGenAOSnmTwampResponderStatsTable." ::= { adGenAOSnmTwampResponderStatsEntry 1 } adGenAOSnmTwampResponderPacketsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets received by the responder." ::= { adGenAOSnmTwampResponderStatsEntry 2 } adGenAOSnmTwampResponderPacketsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets sent by the responder." ::= { adGenAOSnmTwampResponderStatsEntry 3 } adGenAOSnmTwampResponderSessionClosed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of responder sessions closed." ::= { adGenAOSnmTwampResponderStatsEntry 4 } adGenAOSnmTwampResponderSessionOpened OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of responder sessions opened." ::= { adGenAOSnmTwampResponderStatsEntry 5 } adGenAOSnmTwampResponderSessionRejected OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of responder sessions closed." ::= { adGenAOSnmTwampResponderStatsEntry 6 } adGenAOSnmClearTwampResponderCounters OBJECT-TYPE SYNTAX INTEGER { clear (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the counters of the TWAMP responder. This is a write-only variable. A read will result in no action being taken." ::= { adGenAOSnmTwampResponderStatsEntry 7 } -- Network Monitor Configure ICMP Echo Probe Table -- The variables that configure a NetMon ICMP Echo probe. adGenAOSnmCfgIEProbeTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenAOSnmCfgIEProbeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure a network monitor ICMP echo probe." ::= { adGenAOSNetMon 13 } adGenAOSnmCfgIEProbeEntry OBJECT-TYPE SYNTAX AdGenAOSnmCfgIEProbeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parameters used to configure a particular network monitor ICMP echo probe." INDEX { adGenAOSnmIndex } ::= { adGenAOSnmCfgIEProbeTable 1 } AdGenAOSnmCfgIEProbeEntry ::= SEQUENCE { adGenAOSnmCfgIEName OCTET STRING, adGenAOSnmIEDestHostname DisplayString, adGenAOSnmIESrcIP IpAddress, adGenAOSnmIEPacketLength INTEGER, adGenAOSnmIEPacketPattern OCTET STRING } adGenAOSnmCfgIEName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the corresponding ICMP echo probe entry. The probe identified by a particular value of this object is the same probe as identified by the same value as a adGenAOSnmName object instance." ::= { adGenAOSnmCfgIEProbeEntry 1 } adGenAOSnmIEDestHostname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the destination hostname or IP address as a string in dotted decimal format." ::= { adGenAOSnmCfgIEProbeEntry 2 } adGenAOSnmIESrcIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the source IPv4 address." ::= { adGenAOSnmCfgIEProbeEntry 3 } adGenAOSnmIEPacketLength OBJECT-TYPE SYNTAX INTEGER (0..1462) MAX-ACCESS read-write STATUS current DESCRIPTION "Length of the ICMP packet." ::= { adGenAOSnmCfgIEProbeEntry 4 } adGenAOSnmIEPacketPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..4)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the hexadecimal pattern for the ICMP packet." ::= { adGenAOSnmCfgIEProbeEntry 5 } -- Network Monitor Track Table -- The variables that configure a NetMon Track. adGenAOSnmTrackTable OBJECT-TYPE SYNTAX SEQUENCE OF AdGenAOSnmTrackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Network monitor Track." ::= { adGenAOSNetMon 14 } adGenAOSnmTrackEntry OBJECT-TYPE SYNTAX AdGenAOSnmTrackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Network monitor Track entry." INDEX { adGenAOSnmTrackIndex } ::= { adGenAOSnmTrackTable 1 } AdGenAOSnmTrackEntry ::= SEQUENCE { adGenAOSnmTrackIndex Integer32, adGenAOSnmTrackName OCTET STRING } adGenAOSnmTrackIndex OBJECT-TYPE SYNTAX Integer32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Uniquely identifies a row in the adGenAOSnmTrackTable." ::= { adGenAOSnmTrackEntry 1 } adGenAOSnmTrackName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the corresponding Track entry." ::= { adGenAOSnmTrackEntry 2 } -- conformance information adGenAOSnmConformance OBJECT IDENTIFIER ::= { adGenAOSConformance 7 } adGenAOSnmGroups OBJECT IDENTIFIER ::= { adGenAOSnmConformance 1 } adGenAOSnmCompliances OBJECT IDENTIFIER ::= { adGenAOSnmConformance 2 } -- -- MIB Compliance statements. -- -- Full compliance statement adGenAOSnmFullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement version 2 of the adGenAOSNetMon MIB. When this MIB is implemented with support for read-create, then such an implementation can claim full compliance. Network Monitor probes can then be both monitored and configured with this MIB. No more than 10 rows can be created in the adGenAOSnmProbeTable at this time. Attempting to create more than this value will return an error." MODULE -- this module MANDATORY-GROUPS { adGenAOSnmProbeGroup } GROUP adGenAOSnmProbeTableNextIndexGroup DESCRIPTION "This optional group is only required for systems that support the creation of entries in the adGenAOSnmProbeTable." OBJECT adGenAOSnmProbeTableNextIndex MIN-ACCESS read-only DESCRIPTION "This object is only required for systems that support the creation of entries in the adGenAOSnmProbeTable." GROUP adGenAOSnmConfigProbeGroup DESCRIPTION "This optional group is used to configure the probes created with adGenAOSnmProbeGroup." GROUP adGenAOSnmProbeStatusGroup DESCRIPTION "This optional group is used to view the statistics of the probes." GROUP adGenAOSnmCfgTwampProbeGroup DESCRIPTION "This optional group is used to configure the TWAMP probes." GROUP adGenAOSnmTwampHistoryGroup DESCRIPTION "This optional group is used to view the statistics of the TWAMP probes." GROUP adGenAOSnmCfgICMPTSProbeGroup DESCRIPTION "This optional group is used to configure the ICMP timestamp probes." GROUP adGenAOSnmICMPTSHistoryGroup DESCRIPTION "This optional group is used to view the statistics of the ICMP timestamp probes." GROUP adGenAOSnmICMPTSResponderGroup DESCRIPTION "This optional group is used to enable/disable the ICMP timestamp responder." GROUP adGenAOSnmTWAMPResponderGroup DESCRIPTION "This optional group is used to enable/disable the TWAMP responder." GROUP adGenAOSnmICMPTSResponderStatsGroup DESCRIPTION "This optional group is used to ICMP responder statistics." GROUP adGenAOSnmTwampResponderStatsGroup DESCRIPTION "This optional group is used to TWAMP responder statistics." GROUP adGenAOSnmCfgIEProbeGroup DESCRIPTION "This optional group is used to configure the ICMP echo probes." GROUP adGenAOSnmTrackGroup DESCRIPTION "This optional group is used to retrieve track information." OBJECT adGenAOSnmRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { active(1), createAndGo(4), destroy(6) } DESCRIPTION "In order for this object to become active, the following row objects MUST be defined: adGenAOSnmName and adGenAOSnmType. The control row objects adGenAOSnmName and adGenAOSnmType cannot be modified once this conceptual row has been created. Writes of the value 'notInService' and 'createAndWait' will not be supported. This object can be set to 'destroy' from any value at any time." OBJECT adGenAOSnmName MIN-ACCESS read-only DESCRIPTION "Must be defined before adGenAOSnmRowStatus can be set to 'active'. This object cannot be modified once the conceptual row has been created." OBJECT adGenAOSnmType MIN-ACCESS read-only DESCRIPTION "Must be defined before adGenAOSnmRowStatus can be set to 'active'. This object cannot be modified once the conceptual row has been created." ::= { adGenAOSnmCompliances 1 } -- -- Read-Only Compliance -- adGenAOSnmReadOnlyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement version 2 of the adGenAOSNetMon MIB. When this MIB is implemented without support for read-create (i.e. in read-only mode), then such an implementation can claim read-only compliance. A network monitor probe can then be monitored but cannot be configured with this MIB." MODULE -- this module GROUP adGenAOSnmProbeTableNextIndexGroup DESCRIPTION "This optional group is only required for systems that support the creation of entries in the adGenAOSnmProbeTable." OBJECT adGenAOSnmProbeTableNextIndex MIN-ACCESS read-only DESCRIPTION "This object is only required for systems that support the creation of entries in the adGenAOSnmProbeTable." GROUP adGenAOSnmConfigProbeGroup DESCRIPTION "This optional group is used to configure the probes created with adGenAOSnmProbeGroup." GROUP adGenAOSnmProbeStatusGroup DESCRIPTION "This optional group is used to view the statistics of the probes." GROUP adGenAOSnmCfgTwampProbeGroup DESCRIPTION "This optional group is used to configure the TWAMP probes." GROUP adGenAOSnmTwampHistoryGroup DESCRIPTION "This optional group is used to view the statistics of the TWAMP probes." GROUP adGenAOSnmCfgICMPTSProbeGroup DESCRIPTION "This optional group is used to configure the ICMP timestamp probes." GROUP adGenAOSnmICMPTSHistoryGroup DESCRIPTION "This optional group is used to view the statistics of the ICMP timestamp probes." GROUP adGenAOSnmICMPTSResponderGroup DESCRIPTION "This optional group is used to enable/disable the ICMP timestamp responder." GROUP adGenAOSnmTWAMPResponderGroup DESCRIPTION "This optional group is used to enable/disable the TWAMP responder." GROUP adGenAOSnmICMPTSResponderStatsGroup DESCRIPTION "This optional group is used to ICMP responder statistics." GROUP adGenAOSnmTwampResponderStatsGroup DESCRIPTION "This optional group is used to TWAMP responder statistics." GROUP adGenAOSnmCfgIEProbeGroup DESCRIPTION "This optional group is used to configure the ICMP echo probes." GROUP adGenAOSnmTrackGroup DESCRIPTION "This optional group is used to retrieve track information." OBJECT adGenAOSnmRowStatus MIN-ACCESS read-only DESCRIPTION "Write access is not allowed." OBJECT adGenAOSnmName MIN-ACCESS read-only DESCRIPTION "Write access is not allowed." OBJECT adGenAOSnmType MIN-ACCESS read-only DESCRIPTION "Write access is not allowed." GROUP adGenAOSnmNotificationGroup DESCRIPTION "This optional group defines the asynchronous notifications generated by Network Monitoring Monitoring." ::= { adGenAOSnmCompliances 2 } -- units of conformance adGenAOSnmProbeTableNextIndexGroup OBJECT-GROUP OBJECTS { adGenAOSnmProbeTableNextIndex } STATUS current DESCRIPTION "The object necessary to get the next index for creation of the network monitor probe." ::= { adGenAOSnmGroups 1 } adGenAOSnmProbeGroup OBJECT-GROUP OBJECTS { adGenAOSnmIndex, adGenAOSnmName, adGenAOSnmType, adGenAOSnmRowStatus } STATUS current DESCRIPTION "The objects necessary to create the network monitor probe." ::= { adGenAOSnmGroups 2 } adGenAOSnmConfigProbeGroup OBJECT-GROUP OBJECTS { adGenAOSnmCfgName, adGenAOSnmAdminStatus, adGenAOSnmPollPeriod, adGenAOSnmTimeoutPeriod, adGenAOSnmToleranceMode, adGenAOSnmFailTolerance, adGenAOSnmPassTolerance, adGenAOSnmToleranceTestSize, adGenAOSnmClearCounters } STATUS current DESCRIPTION "The objects necessary to configure the network monitor probe." ::= { adGenAOSnmGroups 3 } adGenAOSnmProbeStatusGroup OBJECT-GROUP OBJECTS { adGenAOSnmStatusName, adGenAOSnmTestStatus, adGenAOSnmTestsRun, adGenAOSnmTestsFailed, adGenAOSnmStatsToleranceTestSize, adGenAOSnmStatsToleranceTestValue, adGenAOSnmTimeSinceLastStatusChange } STATUS current DESCRIPTION "Objects designed to assist in retrieving the statistics of the probes." ::= { adGenAOSnmGroups 4 } adGenAOSnmCfgTwampProbeGroup OBJECT-GROUP OBJECTS { adGenAOSnmCfgTwName, adGenAOSnmTwDestHostname, adGenAOSnmTwDestPort, adGenAOSnmTwSrcIP, adGenAOSnmTwSrcPort, adGenAOSnmTwDscp, adGenAOSnmTwPaddingLen, adGenAOSnmTwPaddingFormat, adGenAOSnmTwPaddingPattern, adGenAOSnmTwDataPadType, adGenAOSnmTwPktSendCnt, adGenAOSnmTwSendScheduleType, adGenAOSnmTwSendScheduleValue, adGenAOSnmTwIpdvAbsInMinFail, adGenAOSnmTwIpdvAbsInAvgFail, adGenAOSnmTwIpdvAbsInMaxFail, adGenAOSnmTwIpdvAbsInMinPass, adGenAOSnmTwIpdvAbsInAvgPass, adGenAOSnmTwIpdvAbsInMaxPass, adGenAOSnmTwIpdvAbsOutMinFail, adGenAOSnmTwIpdvAbsOutAvgFail, adGenAOSnmTwIpdvAbsOutMaxFail, adGenAOSnmTwIpdvAbsOutMinPass, adGenAOSnmTwIpdvAbsOutAvgPass, adGenAOSnmTwIpdvAbsOutMaxPass, adGenAOSnmTwIpdvAbsRtMinFail, adGenAOSnmTwIpdvAbsRtAvgFail, adGenAOSnmTwIpdvAbsRtMaxFail, adGenAOSnmTwIpdvAbsRtMinPass, adGenAOSnmTwIpdvAbsRtAvgPass, adGenAOSnmTwIpdvAbsRtMaxPass, adGenAOSnmTwDelayInMinFail, adGenAOSnmTwDelayInAvgFail, adGenAOSnmTwDelayInMaxFail, adGenAOSnmTwDelayInMinPass, adGenAOSnmTwDelayInAvgPass, adGenAOSnmTwDelayInMaxPass, adGenAOSnmTwDelayOutMinFail, adGenAOSnmTwDelayOutAvgFail, adGenAOSnmTwDelayOutMaxFail, adGenAOSnmTwDelayOutMinPass, adGenAOSnmTwDelayOutAvgPass, adGenAOSnmTwDelayOutMaxPass, adGenAOSnmTwDelayRtMinFail, adGenAOSnmTwDelayRtAvgFail, adGenAOSnmTwDelayRtMaxFail, adGenAOSnmTwDelayRtMinPass, adGenAOSnmTwDelayRtAvgPass, adGenAOSnmTwDelayRtMaxPass, adGenAOSnmTwPktRtLossFail, adGenAOSnmTwPktRtLossPass, adGenAOSnmTwHistoryDepth } STATUS current DESCRIPTION "The objects necessary to configure the network monitor TWAMP probe." ::= { adGenAOSnmGroups 5 } adGenAOSnmTwampHistoryGroup OBJECT-GROUP OBJECTS { adGenAOSnmTwSeqNum, adGenAOSnmTwHistoryName, adGenAOSnmTwStartTime, adGenAOSnmTwEndTime, adGenAOSnmTwLocalSyncState, adGenAOSnmTwLocalClkErr, adGenAOSnmTwRemoteSyncState, adGenAOSnmTwRemoteClkErr, adGenAOSnmTwDelayInMin, adGenAOSnmTwDelayInMax, adGenAOSnmTwDelayOutMin, adGenAOSnmTwDelayOutMax, adGenAOSnmTwDelayRtMin, adGenAOSnmTwDelayRtMax, adGenAOSnmTwLossRoundTrip, adGenAOSnmTwDelayOutSum, adGenAOSnmTwDelayOutSum2, adGenAOSnmTwDelayOutNum, adGenAOSnmTwDelayInSum, adGenAOSnmTwDelayInSum2, adGenAOSnmTwDelayInNum, adGenAOSnmTwDelayRtSum, adGenAOSnmTwDelayRtSum2, adGenAOSnmTwDelayRtNum, adGenAOSnmTwIpvPosInMin, adGenAOSnmTwIpvPosInMax, adGenAOSnmTwIpvPosInSum, adGenAOSnmTwIpvPosInSum2, adGenAOSnmTwIpvPosInNum, adGenAOSnmTwIpvPosOutMin, adGenAOSnmTwIpvPosOutMax, adGenAOSnmTwIpvPosOutSum, adGenAOSnmTwIpvPosOutSum2, adGenAOSnmTwIpvPosOutNum, adGenAOSnmTwIpvPosRtMin, adGenAOSnmTwIpvPosRtMax, adGenAOSnmTwIpvPosRtSum, adGenAOSnmTwIpvPosRtSum2, adGenAOSnmTwIpvPosRtNum, adGenAOSnmTwIpvNegInMin, adGenAOSnmTwIpvNegInMax, adGenAOSnmTwIpvNegInSum, adGenAOSnmTwIpvNegInSum2, adGenAOSnmTwIpvNegInNum, adGenAOSnmTwIpvNegOutMin, adGenAOSnmTwIpvNegOutMax, adGenAOSnmTwIpvNegOutSum, adGenAOSnmTwIpvNegOutSum2, adGenAOSnmTwIpvNegOutNum, adGenAOSnmTwIpvNegRtMin, adGenAOSnmTwIpvNegRtMax, adGenAOSnmTwIpvNegRtSum, adGenAOSnmTwIpvNegRtSum2, adGenAOSnmTwIpvNegRtNum, adGenAOSnmTwIpvAbsInMin, adGenAOSnmTwIpvAbsInMax, adGenAOSnmTwIpvAbsInSum, adGenAOSnmTwIpvAbsInSum2, adGenAOSnmTwIpvAbsInNum, adGenAOSnmTwIpvAbsOutMin, adGenAOSnmTwIpvAbsOutMax, adGenAOSnmTwIpvAbsOutSum, adGenAOSnmTwIpvAbsOutSum2, adGenAOSnmTwIpvAbsOutNum, adGenAOSnmTwIpvAbsRtMin, adGenAOSnmTwIpvAbsRtMax, adGenAOSnmTwIpvAbsRtSum, adGenAOSnmTwIpvAbsRtSum2, adGenAOSnmTwIpvAbsRtNum, adGenAOSnmTwPktSentCount } STATUS current DESCRIPTION "Objects designed to assist in retrieving the statistics of the TWAMP probe." ::= { adGenAOSnmGroups 6 } adGenAOSnmCfgICMPTSProbeGroup OBJECT-GROUP OBJECTS { adGenAOSnmCfgICMPTSName, adGenAOSnmICMPTSDestHostname, adGenAOSnmICMPTSSrcIP, adGenAOSnmICMPTSDscp, adGenAOSnmICMPTSPaddingLen, adGenAOSnmICMPTSPaddingFormat, adGenAOSnmICMPTSPaddingPattern, adGenAOSnmICMPTSDataPadType, adGenAOSnmICMPTSPktSendCnt, adGenAOSnmICMPTSSendScheduleType, adGenAOSnmICMPTSSendScheduleValue, adGenAOSnmICMPTSIpdvAbsInMinFail, adGenAOSnmICMPTSIpdvAbsInAvgFail, adGenAOSnmICMPTSIpdvAbsInMaxFail, adGenAOSnmICMPTSIpdvAbsInMinPass, adGenAOSnmICMPTSIpdvAbsInAvgPass, adGenAOSnmICMPTSIpdvAbsInMaxPass, adGenAOSnmICMPTSIpdvAbsOutMinFail, adGenAOSnmICMPTSIpdvAbsOutAvgFail, adGenAOSnmICMPTSIpdvAbsOutMaxFail, adGenAOSnmICMPTSIpdvAbsOutMinPass, adGenAOSnmICMPTSIpdvAbsOutAvgPass, adGenAOSnmICMPTSIpdvAbsOutMaxPass, adGenAOSnmICMPTSIpdvAbsRtMinFail, adGenAOSnmICMPTSIpdvAbsRtAvgFail, adGenAOSnmICMPTSIpdvAbsRtMaxFail, adGenAOSnmICMPTSIpdvAbsRtMinPass, adGenAOSnmICMPTSIpdvAbsRtAvgPass, adGenAOSnmICMPTSIpdvAbsRtMaxPass, adGenAOSnmICMPTSDelayInMinFail, adGenAOSnmICMPTSIpvPosInMin, adGenAOSnmICMPTSIpvPosInMax, adGenAOSnmICMPTSIpvPosInSum, adGenAOSnmICMPTSIpvPosInSum2, adGenAOSnmICMPTSIpvPosInNum, adGenAOSnmICMPTSIpvPosOutMin, adGenAOSnmICMPTSIpvPosOutMax, adGenAOSnmICMPTSIpvPosOutSum, adGenAOSnmICMPTSIpvPosOutSum2, adGenAOSnmICMPTSIpvPosOutNum, adGenAOSnmICMPTSIpvPosRtMin, adGenAOSnmICMPTSIpvPosRtMax, adGenAOSnmICMPTSIpvPosRtSum, adGenAOSnmICMPTSIpvPosRtSum2, adGenAOSnmICMPTSIpvPosRtNum, adGenAOSnmICMPTSIpvNegInMin, adGenAOSnmICMPTSIpvNegInMax, adGenAOSnmICMPTSIpvNegInSum, adGenAOSnmICMPTSIpvNegInSum2, adGenAOSnmICMPTSIpvNegInNum, adGenAOSnmICMPTSIpvNegOutMin, adGenAOSnmICMPTSIpvNegOutMax, adGenAOSnmICMPTSIpvNegOutSum, adGenAOSnmICMPTSIpvNegOutSum2, adGenAOSnmICMPTSIpvNegOutNum, adGenAOSnmICMPTSIpvNegRtMin, adGenAOSnmICMPTSIpvNegRtMax, adGenAOSnmICMPTSIpvNegRtSum, adGenAOSnmICMPTSDelayInAvgFail, adGenAOSnmICMPTSDelayInMaxFail, adGenAOSnmICMPTSDelayInMinPass, adGenAOSnmICMPTSDelayInAvgPass, adGenAOSnmICMPTSDelayInMaxPass, adGenAOSnmICMPTSDelayOutMinFail, adGenAOSnmICMPTSDelayOutAvgFail, adGenAOSnmICMPTSDelayOutMaxFail, adGenAOSnmICMPTSDelayOutMinPass, adGenAOSnmICMPTSDelayOutAvgPass, adGenAOSnmICMPTSDelayOutMaxPass, adGenAOSnmICMPTSDelayRtMinFail, adGenAOSnmICMPTSDelayRtAvgFail, adGenAOSnmICMPTSDelayRtMaxFail, adGenAOSnmICMPTSDelayRtMinPass, adGenAOSnmICMPTSDelayRtAvgPass, adGenAOSnmICMPTSDelayRtMaxPass, adGenAOSnmICMPTSPktRtLossFail, adGenAOSnmICMPTSPktRtLossPass, adGenAOSnmICMPTSHistoryDepth } STATUS current DESCRIPTION "The objects necessary to configure the network monitor ICMP timestamp probe." ::= { adGenAOSnmGroups 7 } adGenAOSnmICMPTSHistoryGroup OBJECT-GROUP OBJECTS { adGenAOSnmICMPTSSeqNum, adGenAOSnmICMPTSHistoryName, adGenAOSnmICMPTSStartTime, adGenAOSnmICMPTSEndTime, adGenAOSnmICMPTSDelayInMin, adGenAOSnmICMPTSDelayInMax, adGenAOSnmICMPTSDelayOutMin, adGenAOSnmICMPTSDelayOutMax, adGenAOSnmICMPTSDelayRtMin, adGenAOSnmICMPTSDelayRtMax, adGenAOSnmICMPTSLossRoundTrip, adGenAOSnmICMPTSDelayOutSum, adGenAOSnmICMPTSDelayOutSum2, adGenAOSnmICMPTSDelayOutNum, adGenAOSnmICMPTSDelayInSum, adGenAOSnmICMPTSDelayInSum2, adGenAOSnmICMPTSDelayInNum, adGenAOSnmICMPTSDelayRtSum, adGenAOSnmICMPTSDelayRtSum2, adGenAOSnmICMPTSDelayRtNum, adGenAOSnmICMPTSIpvPosInMin, adGenAOSnmICMPTSIpvPosInMax, adGenAOSnmICMPTSIpvPosInSum, adGenAOSnmICMPTSIpvPosInSum2, adGenAOSnmICMPTSIpvPosInNum, adGenAOSnmICMPTSIpvPosOutMin, adGenAOSnmICMPTSIpvPosOutMax, adGenAOSnmICMPTSIpvPosOutSum, adGenAOSnmICMPTSIpvPosOutSum2, adGenAOSnmICMPTSIpvPosOutNum, adGenAOSnmICMPTSIpvPosRtMin, adGenAOSnmICMPTSIpvPosRtMax, adGenAOSnmICMPTSIpvPosRtSum, adGenAOSnmICMPTSIpvPosRtSum2, adGenAOSnmICMPTSIpvPosRtNum, adGenAOSnmICMPTSIpvNegInMin, adGenAOSnmICMPTSIpvNegInMax, adGenAOSnmICMPTSIpvNegInSum, adGenAOSnmICMPTSIpvNegInSum2, adGenAOSnmICMPTSIpvNegInNum, adGenAOSnmICMPTSIpvNegOutMin, adGenAOSnmICMPTSIpvNegOutMax, adGenAOSnmICMPTSIpvNegOutSum, adGenAOSnmICMPTSIpvNegOutSum2, adGenAOSnmICMPTSIpvNegOutNum, adGenAOSnmICMPTSIpvNegRtMin, adGenAOSnmICMPTSIpvNegRtMax, adGenAOSnmICMPTSIpvNegRtSum, adGenAOSnmICMPTSIpvNegRtSum2, adGenAOSnmICMPTSIpvNegRtNum, adGenAOSnmICMPTSIpvAbsInMin, adGenAOSnmICMPTSIpvAbsInMax, adGenAOSnmICMPTSIpvAbsInSum, adGenAOSnmICMPTSIpvAbsInSum2, adGenAOSnmICMPTSIpvAbsInNum, adGenAOSnmICMPTSIpvAbsOutMin, adGenAOSnmICMPTSIpvAbsOutMax, adGenAOSnmICMPTSIpvAbsOutSum, adGenAOSnmICMPTSIpvAbsOutSum2, adGenAOSnmICMPTSIpvAbsOutNum, adGenAOSnmICMPTSIpvAbsRtMin, adGenAOSnmICMPTSIpvAbsRtMax, adGenAOSnmICMPTSIpvAbsRtSum, adGenAOSnmICMPTSIpvAbsRtSum2, adGenAOSnmICMPTSIpvAbsRtNum, adGenAOSnmICMPTSPktSentCount } STATUS current DESCRIPTION "Objects designed to assist in retrieving the statistics of the ICMP timestamp probe." ::= { adGenAOSnmGroups 8 } adGenAOSnmICMPTSResponderGroup OBJECT-GROUP OBJECTS { adGenAOSnmICMPTSResponder } STATUS current DESCRIPTION "Object designed to assist in changing the state of the ICMP timestamp responder." ::= { adGenAOSnmGroups 9 } adGenAOSnmTWAMPResponderGroup OBJECT-GROUP OBJECTS { adGenAOSnmTWAMPResponder } STATUS current DESCRIPTION "Object designed to assist in changing the state of the TWAMP responder." ::= { adGenAOSnmGroups 10 } adGenAOSnmICMPTSResponderStatsGroup OBJECT-GROUP OBJECTS { adGenAOSnmICMPTSResponderStatsIndex, adGenAOSnmICMPTSResponderPacketsReceived, adGenAOSnmICMPTSResponderPacketsSent, adGenAOSnmClearICMPTSResponderCounters } STATUS current DESCRIPTION "Objects designed to assist in retrieving the statistics of the ICMP timestamp responder." ::= { adGenAOSnmGroups 11 } adGenAOSnmTwampResponderStatsGroup OBJECT-GROUP OBJECTS { adGenAOSnmTwampResponderStatsIndex, adGenAOSnmTwampResponderPacketsReceived, adGenAOSnmTwampResponderPacketsSent, adGenAOSnmTwampResponderSessionClosed, adGenAOSnmTwampResponderSessionOpened, adGenAOSnmTwampResponderSessionRejected, adGenAOSnmClearTwampResponderCounters } STATUS current DESCRIPTION "Objects designed to assist in retrieving the statistics of the TWAMP responder." ::= { adGenAOSnmGroups 12 } adGenAOSnmCfgIEProbeGroup OBJECT-GROUP OBJECTS { adGenAOSnmCfgIEName, adGenAOSnmIEDestHostname, adGenAOSnmIESrcIP, adGenAOSnmIEPacketLength, adGenAOSnmIEPacketPattern } STATUS current DESCRIPTION "Objects designed to assist in configuring the ICMP echo probe." ::= { adGenAOSnmGroups 13 } adGenAOSnmTrackGroup OBJECT-GROUP OBJECTS { adGenAOSnmTrackIndex, adGenAOSnmTrackName } STATUS current DESCRIPTION "Objects designed to assist in retrieving track information." ::= { adGenAOSnmGroups 14 } adGenAOSnmNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { adGenAOSnmTrackStateChgFail, adGenAOSnmTrackStateChgPass } STATUS current DESCRIPTION "Traps which may be used to enhance event driven management of Network Monitoring traps." ::= { adGenAOSnmGroups 15 } -- definition of track-related traps. adGenAOSnmTrackStateChgFail NOTIFICATION-TYPE OBJECTS { adGenAOSnmTrackIndex, adGenAOSnmTrackName } STATUS current DESCRIPTION "A stateChangeFail trap indicates that the specified track has changed states from Pass to Fail." ::= { adGenAOSnmTrackTraps 1 } adGenAOSnmTrackStateChgPass NOTIFICATION-TYPE OBJECTS { adGenAOSnmTrackIndex, adGenAOSnmTrackName } STATUS current DESCRIPTION "A stateChangePass trap indicates that the specified track has changed states from Fail to Pass." ::= { adGenAOSnmTrackTraps 2 } END