-- *************************************************************************** -- ADVA-FSPR7-MODULE-ENCRYPTION-MIB.txt -- -- ADVA AG Optical Networking Module Encryption MIB File -- -- Copyright 2011 ADVA AG Optical Networking. -- -- All rights reserved. -- *************************************************************************** -- MIB definitions required for Module Encryption management. ADVA-FSPR7-MODULE-ENCRYPTION-MIB DEFINITIONS ::= BEGIN IMPORTS TEXTUAL-CONVENTION, DateAndTime, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI SnmpAdminString FROM SNMP-FRAMEWORK-MIB fspR7, EntityIndex, entityIndex FROM ADVA-MIB entityEqptShelfNo, entityEqptSlotNo, entityEqptPortNo, entityEqptExtNo, entityEqptClassName, entityFacilityShelfNo, entityFacilitySlotNo, entityFacilityPortNo, entityFacilityExtNo, entityFacilityClassName FROM ADVA-FSPR7-MIB FspR7RequestErrorType, FspR7RequestErrorTypeAes, FspR7RlsAction, FspR7RlsActionCaps, FspR7SnmpHexString, FspR7Unsigned32Caps FROM ADVA-FSPR7-TC-MIB; moduleEncryptionMIB MODULE-IDENTITY LAST-UPDATED "201805280000Z" ORGANIZATION "ADVA Optical Networking" CONTACT-INFO "EMEA Support Phone : +49 89 89 0665 848 Fax : +49 89 89 0665 22848 Email : support@advaoptical.com North American Support Phone : 886 442 ADVA (2382) (toll-free within the US, Canada and Mexico) Fax : + 1 806 741 8529 (elsewhere) Email : support-usa@advaoptical.com Asia Pacific Support Phone : + 1 866 442 2382 (other toll-free numbers available in some countries) Email : support-asia@advaoptical.com" DESCRIPTION "This is a MIB definition for ADVA AG Optical Networking module encryption management." REVISION "201805280000Z" DESCRIPTION "FSP3000 F7 Release 17.2.2 MIB." REVISION "201804170000Z" DESCRIPTION "FSP3000 F7 Release 17.2.1 MIB." REVISION "201803150000Z" DESCRIPTION "FSP3000 F7 Release 17.1.2 MIB." REVISION "201712070000Z" DESCRIPTION "FSP3000 F7 Release 17.1.1 MIB." REVISION "201604010000Z" DESCRIPTION "FSP3000 F7 Release 16.1.1 MIB." REVISION "201512100000Z" DESCRIPTION "FSP3000 F7 Release 15.2.1 MIB." REVISION "201308200000Z" DESCRIPTION "FSP3000 F7 Release 12.1.1 MIB." REVISION "201102160000Z" DESCRIPTION "FSP3000 F7 Release 10.3.1 MIB." ::= { fspR7 5 } encryptionMIB OBJECT IDENTIFIER ::= { moduleEncryptionMIB 1 } moduleEncryptionObjects OBJECT IDENTIFIER ::= { encryptionMIB 2 } portEncryptionObjects OBJECT IDENTIFIER ::= { encryptionMIB 3 } encryptionPerformanceMonitoring OBJECT IDENTIFIER ::= { encryptionMIB 4 } encryptionDiagnostics OBJECT IDENTIFIER ::= { encryptionMIB 5 } CryptoFspR7CryBoot ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Encryption Restart" SYNTAX INTEGER { undefined(0), rls(1), warmStart(2), warmStartFwp(3), coldStart(4), coldStartFwp(5) } CryptoFspR7CryBootCaps ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Encryption Restart" SYNTAX BITS { capUndefined(0), capRls(1), capWarmStart(2), capWarmStartFwp(3), capColdStart(4), capColdStartFwp(5) } CryptoFspR7EnableDisable ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enable/Disable variable." SYNTAX INTEGER { undefined(0), enable(1), disable(2) } CryptoFspR7EnableDisableCaps ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enable/Disable variable." SYNTAX BITS { capUndefined(0), capEnable(1), capDisable(2) } CryptoFspR7EncryptionCommunication ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Embedded Communication Channel used to support Encryption" SYNTAX INTEGER { undefined(0), tcm1(1), tcm2(2), tcm3(3), tcm4(4), tcm5(5), tcm6(6), gcc0(7), gcc1(8), gcc2(9), gcc1gcc2(10), res1(11), --ODU OH row 4 column 9 - 12 res2(12), --ODU OH row 4 column 11 - 14 tcm1tcm2(13), tcm2tcm3(14), tcm3tcm4(15), tcm4tcm5(16), tcm5tcm6(17), none(18) } CryptoFspR7EncryptionCommunicationCaps ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Embedded Communication Channel used to support Encryption" SYNTAX BITS { capUndefined(0), capTcm1(1), capTcm2(2), capTcm3(3), capTcm4(4), capTcm5(5), capTcm6(6), capGcc0(7), capGcc1(8), capGcc2(9), capGcc1gcc2(10), capRes1(11), capRes2(12), capTcm1tcm2(13), capTcm2tcm3(14), capTcm3tcm4(15), capTcm4tcm5(16), capTcm5tcm6(17), capNone(18) } CryptoFspR7EncryptionReset ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Textual-Convention for module 'reset to factory' operation. The rls(1) value means that 'reset to factory' is not happening. Choosing the rtf(2) value executes the 'reset to factory' operation immediately." SYNTAX INTEGER { undefined(0), rls(1), rtf(2) --Manual reset, All passwords are cleared } CryptoFspR7EncryptionResetCaps ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Textual-Convention for module 'reset to factory' operation. The rls(1) value means that 'reset to factory' is not happening. Choosing the rtf(2) value executes the 'reset to factory' operation immediately." SYNTAX BITS { capUndefined(0), capRls(1), capRtf(2) } CryptoFspR7EncryptionSwitch ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Textual-Convention for disabling the encrypted mode." SYNTAX INTEGER { undefined(0), rls(1), oprCryptoOff(2) } CryptoFspR7EncryptionSwitchCaps ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Textual-Convention for disabling the encrypted mode." SYNTAX BITS { capUndefined(0), capRls(1), capOprCryptoOff(2) } CryptoFspR7ForceKeyExchange ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Textual-Convention for forcing the key exchange process between encryption-capable modules. Successful process startup does not mean that whole operation succeeded." SYNTAX INTEGER { undefined(0), rls(1), oprKeyExchg(2) } CryptoFspR7ForceKeyExchangeCaps ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Textual-Convention for forcing the key exchange process between encryption-capable modules. Successful process startup does not mean that whole operation succeeded." SYNTAX BITS { capUndefined(0), capRls(1), capOprKeyExchg(2) } CryptoFspR7KeyExchangeForcedClear ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Textual-Convention for reseting the key exchange failure status." SYNTAX INTEGER { undefined(0), rls(1), reset(2) } CryptoFspR7KeyExchangeForcedClearCaps ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Textual-Convention for reseting the key exchange failure status." SYNTAX BITS { capUndefined(0), capRls(1), capReset(2) } CryptoFspR7SelfTestOperation ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Encryption selftest" SYNTAX INTEGER { undefined(0), rls(1), oprSelfTest(2) } CryptoFspR7SelfTestOperationCaps ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Encryption selftest" SYNTAX BITS { capUndefined(0), capRls(1), capOprSelfTest(2) } CryptoFspR7SessionKeyLifetime ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Textual-Convention presenting available key lifetime periods for an encrypted sessions." SYNTAX INTEGER { undefined(0), lifetime30min(1), lifetime1h(2), lifetime2h(3), lifetime3h(4), lifetime6h(5), lifetime12h(6), lifetime1d(7), lifetime2d(8), lifetime3d(9), lifetime1w(10), lifetime2w(11), lifetime3w(12), lifetimeMax(13), lifetime330min(14), lifetime11h(15) } CryptoFspR7SessionKeyLifetimeCaps ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Textual-Convention presenting available key lifetime periods for an encrypted sessions." SYNTAX BITS { capUndefined(0), capLifetime30min(1), capLifetime1h(2), capLifetime2h(3), capLifetime3h(4), capLifetime6h(5), capLifetime12h(6), capLifetime1d(7), capLifetime2d(8), capLifetime3d(9), capLifetime1w(10), capLifetime2w(11), capLifetime3w(12), capLifetimeMax(13), capLifetime330min(14), capLifetime11h(15) } -- mib-oriented scalars cryptoOfficerPassword OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object must be present in every set-request regarding encryption functionality." ::= { moduleEncryptionObjects 1 } cryptoOfficerPasswordError OBJECT-TYPE SYNTAX INTEGER { undefined(0), passwdOk(1), passwdInvalid(2), passwdRejected(3), passwdNotInit(4), passwdTooSimple(5), passwdValidationAborted(6), none(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Last error related to set-request perform on that table." ::= { moduleEncryptionObjects 2 } cryptoOfficerPasswordReqId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Set-Request id for which cryptoOfficerPasswordError contains value." ::= { moduleEncryptionObjects 3 } -- module encryption configuration cryptoModuleConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CryptoModuleConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains encryption-related writeable parameters defined per module." ::= { moduleEncryptionObjects 10 } cryptoModuleConfigEntry OBJECT-TYPE SYNTAX CryptoModuleConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Every row of this table represents an encryption-capable module." INDEX { cryptoModuleConfigIndex } ::= { cryptoModuleConfigTable 1 } CryptoModuleConfigEntry ::= SEQUENCE { cryptoModuleConfigIndex EntityIndex, cryptoModuleConfigCryptoOfficerPassword SnmpAdminString, cryptoModuleConfigResetToFactory CryptoFspR7EncryptionReset, cryptoModuleConfigFirmwareUpdateState CryptoFspR7EnableDisable, cryptoModuleConfigFirmwareVersion SnmpAdminString, cryptoModuleConfigSelfTestOperation CryptoFspR7SelfTestOperation } cryptoModuleConfigIndex OBJECT-TYPE SYNTAX EntityIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Address of an encryption capable module." ::= { cryptoModuleConfigEntry 1 } cryptoModuleConfigCryptoOfficerPassword OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The current Crypto Officer password. It may be only modified, but cannot be read. Read attempt of this object will result with noSuchName error." ::= { cryptoModuleConfigEntry 2 } cryptoModuleConfigResetToFactory OBJECT-TYPE SYNTAX CryptoFspR7EncryptionReset MAX-ACCESS read-write STATUS current DESCRIPTION "Executes 'reset to factory' action." ::= { cryptoModuleConfigEntry 3 } cryptoModuleConfigFirmwareUpdateState OBJECT-TYPE SYNTAX CryptoFspR7EnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Determines if it is allowed for a module to perform firmware upgrade." ::= { cryptoModuleConfigEntry 4 } cryptoModuleConfigFirmwareVersion OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "Firmware package version designated for an upgrade." ::= { cryptoModuleConfigEntry 5 } cryptoModuleConfigSelfTestOperation OBJECT-TYPE SYNTAX CryptoFspR7SelfTestOperation MAX-ACCESS read-write STATUS current DESCRIPTION "Starts self-tests." ::= { cryptoModuleConfigEntry 6 } -- module encryption monitoring cryptoModuleStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF CryptoModuleStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains encryption-related readable parameters defined per module." ::= { moduleEncryptionObjects 11 } cryptoModuleStatusEntry OBJECT-TYPE SYNTAX CryptoModuleStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Every row of this table represents an encryption-capable module." INDEX { cryptoModuleConfigIndex } ::= { cryptoModuleStatusTable 1 } CryptoModuleStatusEntry ::= SEQUENCE { cryptoModuleStatusIndex EntityIndex, cryptoModuleStatusFailureLoginCount Unsigned32, cryptoModuleStatusSuccessfulLoginDateAndTime DateAndTime, cryptoModuleStatusUnsuccessfulLoginDateAndTime DateAndTime, cryptoModuleStatusResetToFactoryCapability CryptoFspR7EnableDisable } cryptoModuleStatusIndex OBJECT-TYPE SYNTAX EntityIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Address of an encryption capable module." ::= { cryptoModuleStatusEntry 1 } cryptoModuleStatusFailureLoginCount OBJECT-TYPE SYNTAX Unsigned32 (0..3 | 4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of unsuccessful Crypto Officer log-in attempts." ::= { cryptoModuleStatusEntry 2 } cryptoModuleStatusSuccessfulLoginDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time of a last successful Crypto Officer login." ::= { cryptoModuleStatusEntry 3 } cryptoModuleStatusUnsuccessfulLoginDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time of a last unsuccessful Crypto Officer login." ::= { cryptoModuleStatusEntry 4 } cryptoModuleStatusResetToFactoryCapability OBJECT-TYPE SYNTAX CryptoFspR7EnableDisable MAX-ACCESS read-only STATUS current DESCRIPTION "The status of possibility to perform Reset To Factory operation. If disable(2) then cryptoModuleConfigResetToFactory cannot be used, otherwise operation will fail." ::= { cryptoModuleStatusEntry 5 } -- five index scheme module encryption cryptoModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF CryptoModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains encryption-related parameters defined per module." ::= { moduleEncryptionObjects 20 } cryptoModuleEntry OBJECT-TYPE SYNTAX CryptoModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Every row of this table represents an encryption-capable module." INDEX { entityEqptShelfNo, entityEqptSlotNo, entityEqptPortNo, entityEqptExtNo, entityEqptClassName } ::= { cryptoModuleTable 1 } CryptoModuleEntry ::= SEQUENCE { cryptoModuleCryptoOfficerPassword SnmpAdminString, cryptoModuleResetToFactory CryptoFspR7EncryptionReset, cryptoModuleFirmwareUpdateState CryptoFspR7EnableDisable, cryptoModuleFirmwareVersion SnmpAdminString, cryptoModuleSelfTestOperation CryptoFspR7SelfTestOperation, cryptoModuleFailureLoginCount Unsigned32, cryptoModuleSuccessfulLoginDateAndTime DateAndTime, cryptoModuleUnsuccessfulLoginDateAndTime DateAndTime, cryptoModuleFwpHash FspR7SnmpHexString, cryptoModuleCryBoot CryptoFspR7CryBoot, cryptoModuleStbyFwpHash FspR7SnmpHexString, cryptoModuleSelfTestExecute Unsigned32, cryptoModuleSelfTestResult Unsigned32 } cryptoModuleCryptoOfficerPassword OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The current Crypto Officer password. It may be only modified, but cannot be read. Read attempt of this object will result with noSuchName error." ::= { cryptoModuleEntry 1 } cryptoModuleResetToFactory OBJECT-TYPE SYNTAX CryptoFspR7EncryptionReset MAX-ACCESS read-write STATUS current DESCRIPTION "Executes 'reset to factory' action." ::= { cryptoModuleEntry 2 } cryptoModuleFirmwareUpdateState OBJECT-TYPE SYNTAX CryptoFspR7EnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Determines if it is allowed for a module to perform firmware upgrade." ::= { cryptoModuleEntry 3 } cryptoModuleFirmwareVersion OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "Firmware package version designated for an upgrade." ::= { cryptoModuleEntry 4 } cryptoModuleSelfTestOperation OBJECT-TYPE SYNTAX CryptoFspR7SelfTestOperation MAX-ACCESS read-write STATUS current DESCRIPTION "Starts self-tests." ::= { cryptoModuleEntry 5 } cryptoModuleFailureLoginCount OBJECT-TYPE SYNTAX Unsigned32 (0..3 | 4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of unsuccessful Crypto Officer log-in attempts." ::= { cryptoModuleEntry 6 } cryptoModuleSuccessfulLoginDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time of a last successful Crypto Officer login." ::= { cryptoModuleEntry 7 } cryptoModuleUnsuccessfulLoginDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time of a last unsuccessful Crypto Officer login." ::= { cryptoModuleEntry 8 } cryptoModuleFwpHash OBJECT-TYPE SYNTAX FspR7SnmpHexString MAX-ACCESS read-only STATUS current DESCRIPTION "Hash value calculated for the firmware package using sha-256. Hash value is used to verify the firmware package has not been modified or corrupted." ::= { cryptoModuleEntry 9 } cryptoModuleCryBoot OBJECT-TYPE SYNTAX CryptoFspR7CryBoot MAX-ACCESS read-write STATUS current DESCRIPTION "Encryption Restart" ::= { cryptoModuleEntry 10 } cryptoModuleStbyFwpHash OBJECT-TYPE SYNTAX FspR7SnmpHexString MAX-ACCESS read-only STATUS current DESCRIPTION "Hash value calculated for the standby firmware package of the using sha-256. Hash value is used to verify the firmware package has not been modified or corrupted." ::= { cryptoModuleEntry 11 } cryptoModuleSelfTestExecute OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Executed selftests" ::= { cryptoModuleEntry 12 } cryptoModuleSelfTestResult OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Result of Selftest" ::= { cryptoModuleEntry 13 } cryptoModuleCapTable OBJECT-TYPE SYNTAX SEQUENCE OF CryptoModuleCapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains encryption-related parameters defined per module." ::= { moduleEncryptionObjects 21 } cryptoModuleCapEntry OBJECT-TYPE SYNTAX CryptoModuleCapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Every row of this table represents an encryption-capable module." INDEX { entityEqptShelfNo, entityEqptSlotNo, entityEqptPortNo, entityEqptExtNo, entityEqptClassName } ::= { cryptoModuleCapTable 1 } CryptoModuleCapEntry ::= SEQUENCE { cryptoModuleCapCryptoOfficerPassword Integer32, cryptoModuleCapResetToFactory CryptoFspR7EncryptionResetCaps, cryptoModuleCapFirmwareUpdateState CryptoFspR7EnableDisableCaps, cryptoModuleCapFirmwareVersion Integer32, cryptoModuleCapSelfTestOperation CryptoFspR7SelfTestOperationCaps, cryptoModuleCapCryBoot CryptoFspR7CryBootCaps } cryptoModuleCapCryptoOfficerPassword OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current Crypto Officer password. It may be only modified, but cannot be read. Read attempt of this object will result with noSuchName error." ::= { cryptoModuleCapEntry 1 } cryptoModuleCapResetToFactory OBJECT-TYPE SYNTAX CryptoFspR7EncryptionResetCaps MAX-ACCESS read-only STATUS current DESCRIPTION "Executes 'reset to factory' action." ::= { cryptoModuleCapEntry 2 } cryptoModuleCapFirmwareUpdateState OBJECT-TYPE SYNTAX CryptoFspR7EnableDisableCaps MAX-ACCESS read-only STATUS current DESCRIPTION "Determines if it is allowed for a module to perform firmware upgrade." ::= { cryptoModuleCapEntry 3 } cryptoModuleCapFirmwareVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Firmware package version designated for an upgrade." ::= { cryptoModuleCapEntry 4 } cryptoModuleCapSelfTestOperation OBJECT-TYPE SYNTAX CryptoFspR7SelfTestOperationCaps MAX-ACCESS read-only STATUS current DESCRIPTION "Starts self-tests." ::= { cryptoModuleCapEntry 5 } cryptoModuleCapCryBoot OBJECT-TYPE SYNTAX CryptoFspR7CryBootCaps MAX-ACCESS read-only STATUS current DESCRIPTION "Encryption Restart" ::= { cryptoModuleCapEntry 6 } -- port encryption configuration cryptoPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CryptoPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains encryption-related writeable parameters defined per port." ::= { portEncryptionObjects 12 } cryptoPortConfigEntry OBJECT-TYPE SYNTAX CryptoPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Every row of this table represents an encryption-capable port." INDEX { cryptoPortConfigIndex } ::= { cryptoPortConfigTable 1 } CryptoPortConfigEntry ::= SEQUENCE { cryptoPortConfigIndex EntityIndex, cryptoPortConfigAuthKey SnmpAdminString, cryptoPortConfigAuthKeyLifeTime CryptoFspR7SessionKeyLifetime, cryptoPortConfigEncryptionOffState CryptoFspR7EnableDisable, cryptoPortConfigEncryptionOff CryptoFspR7EncryptionSwitch, cryptoPortConfigForceKeyExchange CryptoFspR7ForceKeyExchange, cryptoPortConfigKeyExchangeForcedClear CryptoFspR7KeyExchangeForcedClear } cryptoPortConfigIndex OBJECT-TYPE SYNTAX EntityIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Address of an encryption capable port." ::= { cryptoPortConfigEntry 1 } cryptoPortConfigAuthKey OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "Encryption password being an input to generate an authentication key used to traffic encryption between ports. This object can be write only. Read attempt will fail with noSuchName error." ::= { cryptoPortConfigEntry 2 } cryptoPortConfigAuthKeyLifeTime OBJECT-TYPE SYNTAX CryptoFspR7SessionKeyLifetime MAX-ACCESS read-write STATUS current DESCRIPTION "Determines a life period of an introduced authentication key for a traffic encryption." ::= { cryptoPortConfigEntry 3 } cryptoPortConfigEncryptionOffState OBJECT-TYPE SYNTAX CryptoFspR7EnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable possibility of using encryption switch. This is an additional trigger required to make a transition into transparent mode in two steps." ::= { cryptoPortConfigEntry 4 } cryptoPortConfigEncryptionOff OBJECT-TYPE SYNTAX CryptoFspR7EncryptionSwitch MAX-ACCESS read-write STATUS current DESCRIPTION "Disable/enable encryption switch." ::= { cryptoPortConfigEntry 5 } cryptoPortConfigForceKeyExchange OBJECT-TYPE SYNTAX CryptoFspR7ForceKeyExchange MAX-ACCESS read-write STATUS current DESCRIPTION "Force key exchange." ::= { cryptoPortConfigEntry 6 } cryptoPortConfigKeyExchangeForcedClear OBJECT-TYPE SYNTAX CryptoFspR7KeyExchangeForcedClear MAX-ACCESS read-write STATUS current DESCRIPTION "Clears on demand the alarmEncryptionPortKeyExchangeForced condition." ::= { cryptoPortConfigEntry 7 } -- port encryption monitoring cryptoPortStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF CryptoPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains encryption-related readable parameters defined per port." ::= { portEncryptionObjects 13 } cryptoPortStatusEntry OBJECT-TYPE SYNTAX CryptoPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Every row of this table represents an encryption-capable port." INDEX { cryptoPortStatusIndex } ::= { cryptoPortStatusTable 1 } CryptoPortStatusEntry ::= SEQUENCE { cryptoPortStatusIndex EntityIndex, cryptoPortStatusEncryptionOffTimeRemaining Unsigned32, cryptoPortStatusFailureKeyExchangeCount Unsigned32, cryptoPortStatusSuccessfulKeyExchangeDateAndTime DateAndTime, cryptoPortStatusUnsuccessfulKeyExchangeDateAndTime DateAndTime, cryptoPortStatusAuthKeyLifeTimeRemaining Unsigned32, cryptoPortStatusEncryptionOffCapability CryptoFspR7EnableDisable } cryptoPortStatusIndex OBJECT-TYPE SYNTAX EntityIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Address of an encryption capable module." ::= { cryptoPortStatusEntry 1 } cryptoPortStatusEncryptionOffTimeRemaining OBJECT-TYPE SYNTAX Unsigned32 UNITS "s" MAX-ACCESS read-only STATUS current DESCRIPTION "Informs about amount of minutes remaining to restore traffic encryption." ::= { cryptoPortStatusEntry 2 } cryptoPortStatusFailureKeyExchangeCount OBJECT-TYPE SYNTAX Unsigned32 (0..3 | 4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Numbers of unsuccessful encryption key exchanges since the successful one." ::= { cryptoPortStatusEntry 3 } cryptoPortStatusSuccessfulKeyExchangeDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time of a recent successful encryption key exchange." ::= { cryptoPortStatusEntry 4 } cryptoPortStatusUnsuccessfulKeyExchangeDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time of a recent unsuccessful encryption key exchange." ::= { cryptoPortStatusEntry 5 } cryptoPortStatusAuthKeyLifeTimeRemaining OBJECT-TYPE SYNTAX Unsigned32 UNITS "s" MAX-ACCESS read-only STATUS current DESCRIPTION "Remaining time for cryptoPortConfigAuthKeyLifeTime timer to stop counting." ::= { cryptoPortStatusEntry 6 } cryptoPortStatusEncryptionOffCapability OBJECT-TYPE SYNTAX CryptoFspR7EnableDisable MAX-ACCESS read-only STATUS current DESCRIPTION "Capability for encryption switch." ::= { cryptoPortStatusEntry 7 } -- five index scheme port encryption cryptoPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CryptoPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains encryption-related parameters defined per port." ::= { portEncryptionObjects 20 } cryptoPortEntry OBJECT-TYPE SYNTAX CryptoPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Every row of this table represents an encryption-capable port." INDEX { entityFacilityShelfNo, entityFacilitySlotNo, entityFacilityPortNo, entityFacilityExtNo, entityFacilityClassName } ::= { cryptoPortTable 1 } CryptoPortEntry ::= SEQUENCE { cryptoPortAuthKey SnmpAdminString, cryptoPortAuthKeyLifeTime CryptoFspR7SessionKeyLifetime, cryptoPortEncryptionOffState CryptoFspR7EnableDisable, cryptoPortEncryptionOff CryptoFspR7EncryptionSwitch, cryptoPortForceKeyExchange CryptoFspR7ForceKeyExchange, cryptoPortKeyExchangeForcedClear CryptoFspR7KeyExchangeForcedClear, cryptoPortEncryptionOffTimeRemaining Unsigned32, cryptoPortFailureKeyExchangeCount Unsigned32, cryptoPortSuccessfulKeyExchangeDateAndTime DateAndTime, cryptoPortUnsuccessfulKeyExchangeDateAndTime DateAndTime, cryptoPortAuthKeyLifeTimeRemaining Unsigned32, cryptoPortTagFailureLimit Unsigned32, cryptoPortTagFailurePeriod Unsigned32, cryptoPortTagReceiveFailures Unsigned32, cryptoPortTagClear CryptoFspR7KeyExchangeForcedClear, cryptoPortEncryptionChannel CryptoFspR7EncryptionCommunication, cryptoPortTagFailTimeExpiration Unsigned32, cryptoPortGenAuthKey FspR7RlsAction, cryptoPortAcceptFpKeyRx FspR7RlsAction, cryptoPortFpKey FspR7SnmpHexString, cryptoPortFpKeyRx FspR7SnmpHexString } cryptoPortAuthKey OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "Encryption password being an input to generate an authentication key used to traffic encryption between ports. This object can be write only. Read attempt will fail with noSuchName error." ::= { cryptoPortEntry 1 } cryptoPortAuthKeyLifeTime OBJECT-TYPE SYNTAX CryptoFspR7SessionKeyLifetime MAX-ACCESS read-write STATUS current DESCRIPTION "Determines a life period of an introduced authentication key for a traffic encryption." ::= { cryptoPortEntry 2 } cryptoPortEncryptionOffState OBJECT-TYPE SYNTAX CryptoFspR7EnableDisable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable possibility of using encryption switch. This is an additional trigger required to make a transition into transparent mode in two steps." ::= { cryptoPortEntry 3 } cryptoPortEncryptionOff OBJECT-TYPE SYNTAX CryptoFspR7EncryptionSwitch MAX-ACCESS read-write STATUS current DESCRIPTION "Disable/enable encryption switch." ::= { cryptoPortEntry 4 } cryptoPortForceKeyExchange OBJECT-TYPE SYNTAX CryptoFspR7ForceKeyExchange MAX-ACCESS read-write STATUS current DESCRIPTION "Force key exchange." ::= { cryptoPortEntry 5 } cryptoPortKeyExchangeForcedClear OBJECT-TYPE SYNTAX CryptoFspR7KeyExchangeForcedClear MAX-ACCESS read-write STATUS current DESCRIPTION "Clears on demand the alarmEncryptionPortKeyExchangeForced condition." ::= { cryptoPortEntry 6 } cryptoPortEncryptionOffTimeRemaining OBJECT-TYPE SYNTAX Unsigned32 UNITS "s" MAX-ACCESS read-only STATUS current DESCRIPTION "Informs about amount of minutes remaining to restore traffic encryption." ::= { cryptoPortEntry 7 } cryptoPortFailureKeyExchangeCount OBJECT-TYPE SYNTAX Unsigned32 (0..3 | 4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Numbers of unsuccessful encryption key exchanges since the successful one." ::= { cryptoPortEntry 8 } cryptoPortSuccessfulKeyExchangeDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time of a recent successful encryption key exchange." ::= { cryptoPortEntry 9 } cryptoPortUnsuccessfulKeyExchangeDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time of a recent unsuccessful encryption key exchange." ::= { cryptoPortEntry 10 } cryptoPortAuthKeyLifeTimeRemaining OBJECT-TYPE SYNTAX Unsigned32 UNITS "s" MAX-ACCESS read-only STATUS current DESCRIPTION "Remaining time for cryptoPortConfigAuthKeyLifeTime timer to stop counting." ::= { cryptoPortEntry 11 } cryptoPortTagFailureLimit OBJECT-TYPE SYNTAX Unsigned32 (1..100 | 4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of Ethernet packets received with a tag errors in the specified time window (TAGFAIL-TIMER) that causes the 'Tag Error-Limit Reached' (TAG-FAIL) alarm to be generated" ::= { cryptoPortEntry 12 } cryptoPortTagFailurePeriod OBJECT-TYPE SYNTAX Unsigned32 (10..28800 | 4294967295) UNITS "s" MAX-ACCESS read-write STATUS current DESCRIPTION "Time window Ethernet packets with tag errors are counted/accumualted for alarm purposes" ::= { cryptoPortEntry 13 } cryptoPortTagReceiveFailures OBJECT-TYPE SYNTAX Unsigned32 (0..3 | 4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Ethernet packets received with a tag error in the specified time window (TAGFAIL-TIMER)" ::= { cryptoPortEntry 14 } cryptoPortTagClear OBJECT-TYPE SYNTAX CryptoFspR7KeyExchangeForcedClear MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the operator to reset (zero) the Ethernet packet tag error count for the current specified time window (TAGFAIL-TIME)" ::= { cryptoPortEntry 15 } cryptoPortEncryptionChannel OBJECT-TYPE SYNTAX CryptoFspR7EncryptionCommunication MAX-ACCESS read-only STATUS current DESCRIPTION "Embedded Communication Channel used to support Encryption" ::= { cryptoPortEntry 16 } cryptoPortTagFailTimeExpiration OBJECT-TYPE SYNTAX Unsigned32 UNITS "s" MAX-ACCESS read-only STATUS current DESCRIPTION "Count down of time window for Ethernet packets with tag errors for alarm purposes" ::= { cryptoPortEntry 17 } cryptoPortGenAuthKey OBJECT-TYPE SYNTAX FspR7RlsAction MAX-ACCESS read-write STATUS current DESCRIPTION "Generate new authentication key" ::= { cryptoPortEntry 18 } cryptoPortAcceptFpKeyRx OBJECT-TYPE SYNTAX FspR7RlsAction MAX-ACCESS read-write STATUS current DESCRIPTION "Accept Authentication key received from far end" ::= { cryptoPortEntry 19 } cryptoPortFpKey OBJECT-TYPE SYNTAX FspR7SnmpHexString MAX-ACCESS read-only STATUS current DESCRIPTION "Authentication Key" ::= { cryptoPortEntry 20 } cryptoPortFpKeyRx OBJECT-TYPE SYNTAX FspR7SnmpHexString MAX-ACCESS read-only STATUS current DESCRIPTION "Authentication key received from the far end" ::= { cryptoPortEntry 21 } cryptoPortCapTable OBJECT-TYPE SYNTAX SEQUENCE OF CryptoPortCapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains encryption-related parameters defined per port." ::= { portEncryptionObjects 21 } cryptoPortCapEntry OBJECT-TYPE SYNTAX CryptoPortCapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Every row of this table represents an encryption-capable port." INDEX { entityFacilityShelfNo, entityFacilitySlotNo, entityFacilityPortNo, entityFacilityExtNo, entityFacilityClassName } ::= { cryptoPortCapTable 1 } CryptoPortCapEntry ::= SEQUENCE { cryptoPortCapAuthKey Integer32, cryptoPortCapAuthKeyLifeTime CryptoFspR7SessionKeyLifetimeCaps, cryptoPortCapEncryptionOffState CryptoFspR7EnableDisableCaps, cryptoPortCapEncryptionOff CryptoFspR7EncryptionSwitchCaps, cryptoPortCapForceKeyExchange CryptoFspR7ForceKeyExchangeCaps, cryptoPortCapKeyExchangeForcedClear CryptoFspR7KeyExchangeForcedClearCaps, cryptoPortCapTagFailureLimit FspR7Unsigned32Caps, cryptoPortCapTagFailurePeriod FspR7Unsigned32Caps, cryptoPortCapTagClear CryptoFspR7KeyExchangeForcedClearCaps, cryptoPortCapEncryptionChannel CryptoFspR7EncryptionCommunicationCaps, cryptoPortCapGenAuthKey FspR7RlsActionCaps, cryptoPortCapAcceptAuthRxKey FspR7RlsActionCaps } cryptoPortCapAuthKey OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Encryption password being an input to generate an authentication key used to traffic encryption between ports. This object can be write only. Read attempt will fail with noSuchName error." ::= { cryptoPortCapEntry 1 } cryptoPortCapAuthKeyLifeTime OBJECT-TYPE SYNTAX CryptoFspR7SessionKeyLifetimeCaps MAX-ACCESS read-only STATUS current DESCRIPTION "Determines a life period of an introduced authentication key for a traffic encryption." ::= { cryptoPortCapEntry 2 } cryptoPortCapEncryptionOffState OBJECT-TYPE SYNTAX CryptoFspR7EnableDisableCaps MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable possibility of using encryption switch. This is an additional trigger required to make a transition into transparent mode in two steps." ::= { cryptoPortCapEntry 3 } cryptoPortCapEncryptionOff OBJECT-TYPE SYNTAX CryptoFspR7EncryptionSwitchCaps MAX-ACCESS read-only STATUS current DESCRIPTION "Disable/enable encryption switch." ::= { cryptoPortCapEntry 4 } cryptoPortCapForceKeyExchange OBJECT-TYPE SYNTAX CryptoFspR7ForceKeyExchangeCaps MAX-ACCESS read-only STATUS current DESCRIPTION "Force key exchange." ::= { cryptoPortCapEntry 5 } cryptoPortCapKeyExchangeForcedClear OBJECT-TYPE SYNTAX CryptoFspR7KeyExchangeForcedClearCaps MAX-ACCESS read-only STATUS current DESCRIPTION "Clears on demand the alarmEncryptionPortKeyExchangeForced condition." ::= { cryptoPortCapEntry 6 } cryptoPortCapTagFailureLimit OBJECT-TYPE SYNTAX FspR7Unsigned32Caps MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Ethernet packets received with a tag errors in the specified time window (TAGFAIL-TIMER) that causes the 'Tag Error-Limit Reached' (TAG-FAIL) alarm to be generated" ::= { cryptoPortCapEntry 7 } cryptoPortCapTagFailurePeriod OBJECT-TYPE SYNTAX FspR7Unsigned32Caps UNITS "s" MAX-ACCESS read-only STATUS current DESCRIPTION "Time window Ethernet packets with tag errors are counted/accumualted for alarm purposes" ::= { cryptoPortCapEntry 8 } cryptoPortCapTagClear OBJECT-TYPE SYNTAX CryptoFspR7KeyExchangeForcedClearCaps MAX-ACCESS read-only STATUS current DESCRIPTION "Allows the operator to reset (zero) the Ethernet packet tag error count for the current specified time window (TAGFAIL-TIME)" ::= { cryptoPortCapEntry 9 } cryptoPortCapEncryptionChannel OBJECT-TYPE SYNTAX CryptoFspR7EncryptionCommunicationCaps MAX-ACCESS read-only STATUS current DESCRIPTION "Embedded Communication Channel used to support Encryption" ::= { cryptoPortCapEntry 10 } cryptoPortCapGenAuthKey OBJECT-TYPE SYNTAX FspR7RlsActionCaps MAX-ACCESS read-only STATUS current DESCRIPTION "Generate new authentication key" ::= { cryptoPortCapEntry 11 } cryptoPortCapAcceptAuthRxKey OBJECT-TYPE SYNTAX FspR7RlsActionCaps MAX-ACCESS read-only STATUS current DESCRIPTION "Accept Authentication key received from far end" ::= { cryptoPortCapEntry 12 } -- performance monitoring of an encrypted port intervalEncryptionSublayerPm15minTable OBJECT-TYPE SYNTAX SEQUENCE OF IntervalEncryptionSublayerPm15minEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains encryption-related performance monitoring 15-min values related to channel ports." ::= { encryptionPerformanceMonitoring 1 } intervalEncryptionSublayerPm15minEntry OBJECT-TYPE SYNTAX IntervalEncryptionSublayerPm15minEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Every row of this table represents performance monitoring entry." INDEX { entityIndex, intervalEncryptionSublayerPm15minNumber } ::= { intervalEncryptionSublayerPm15minTable 1 } IntervalEncryptionSublayerPm15minEntry ::= SEQUENCE { intervalEncryptionSublayerPm15minNumber Integer32, intervalEncryptionSublayerPm15minEncryptionRunSeconds Unsigned32, intervalEncryptionSublayerPm15minEncryptionRunErrorSeconds Unsigned32, intervalEncryptionSublayerPm15minEncryptionRunDegradeSeconds Unsigned32, intervalEncryptionSublayerPm15minValidFlag TruthValue, intervalEncryptionSublayerPm15minTimeStamp DateAndTime } intervalEncryptionSublayerPm15minNumber OBJECT-TYPE SYNTAX Integer32 (1..96) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { intervalEncryptionSublayerPm15minEntry 1 } intervalEncryptionSublayerPm15minEncryptionRunSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Informs about time period (seconds) during encryption mode." ::= { intervalEncryptionSublayerPm15minEntry 2 } intervalEncryptionSublayerPm15minEncryptionRunErrorSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Informs about errorous time period (seconds) during encryption mode." ::= { intervalEncryptionSublayerPm15minEntry 3 } intervalEncryptionSublayerPm15minEncryptionRunDegradeSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Informs about degraded time period (seconds) during encryption mode." ::= { intervalEncryptionSublayerPm15minEntry 4 } intervalEncryptionSublayerPm15minValidFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Flag" ::= { intervalEncryptionSublayerPm15minEntry 5 } intervalEncryptionSublayerPm15minTimeStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp" ::= { intervalEncryptionSublayerPm15minEntry 6 } intervalEncryptionSublayerPm1dayTable OBJECT-TYPE SYNTAX SEQUENCE OF IntervalEncryptionSublayerPm1dayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains interval encryption-related performance monitoring 15-min values related to channel ports." ::= { encryptionPerformanceMonitoring 2 } intervalEncryptionSublayerPm1dayEntry OBJECT-TYPE SYNTAX IntervalEncryptionSublayerPm1dayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Every row of this table represents performance monitoring entry." INDEX { entityIndex, intervalEncryptionSublayerPm1dayNumber } ::= { intervalEncryptionSublayerPm1dayTable 1 } IntervalEncryptionSublayerPm1dayEntry ::= SEQUENCE { intervalEncryptionSublayerPm1dayNumber Integer32, intervalEncryptionSublayerPm1dayEncryptionRunSeconds Unsigned32, intervalEncryptionSublayerPm1dayEncryptionRunErrorSeconds Unsigned32, intervalEncryptionSublayerPm1dayEncryptionRunDegradeSeconds Unsigned32, intervalEncryptionSublayerPm1dayValidFlag TruthValue, intervalEncryptionSublayerPm1dayTimeStamp DateAndTime } intervalEncryptionSublayerPm1dayNumber OBJECT-TYPE SYNTAX Integer32 (1..31) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 1 day interval." ::= { intervalEncryptionSublayerPm1dayEntry 1 } intervalEncryptionSublayerPm1dayEncryptionRunSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Informs about time period (seconds) during encryption mode." ::= { intervalEncryptionSublayerPm1dayEntry 2 } intervalEncryptionSublayerPm1dayEncryptionRunErrorSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Informs about errorous time period (seconds) during encryption mode." ::= { intervalEncryptionSublayerPm1dayEntry 3 } intervalEncryptionSublayerPm1dayEncryptionRunDegradeSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Informs about degraded time period (seconds) during encryption mode." ::= { intervalEncryptionSublayerPm1dayEntry 4 } intervalEncryptionSublayerPm1dayValidFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Flag" ::= { intervalEncryptionSublayerPm1dayEntry 5 } intervalEncryptionSublayerPm1dayTimeStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp" ::= { intervalEncryptionSublayerPm1dayEntry 6 } currentEncryptionSublayerPm15minTable OBJECT-TYPE SYNTAX SEQUENCE OF CurrentEncryptionSublayerPm15minEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains current encryption-related performance monitoring 15-min values related to channel ports." ::= { encryptionPerformanceMonitoring 3 } currentEncryptionSublayerPm15minEntry OBJECT-TYPE SYNTAX CurrentEncryptionSublayerPm15minEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Every row of this table represents performance monitoring entry." INDEX { entityIndex } ::= { currentEncryptionSublayerPm15minTable 1 } CurrentEncryptionSublayerPm15minEntry ::= SEQUENCE { currentEncryptionSublayerPm15minEncryptionRunSeconds Unsigned32, currentEncryptionSublayerPm15minEncryptionRunErrorSeconds Unsigned32, currentEncryptionSublayerPm15minEncryptionRunDegradeSeconds Unsigned32, currentEncryptionSublayerPm15minElapsedTime Integer32 } currentEncryptionSublayerPm15minEncryptionRunSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Encryption running seconds" ::= { currentEncryptionSublayerPm15minEntry 1 } currentEncryptionSublayerPm15minEncryptionRunErrorSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Encryption Errored Seconds" ::= { currentEncryptionSublayerPm15minEntry 2 } currentEncryptionSublayerPm15minEncryptionRunDegradeSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Encryption in degrade mode seconds" ::= { currentEncryptionSublayerPm15minEntry 3 } currentEncryptionSublayerPm15minElapsedTime OBJECT-TYPE SYNTAX Integer32 (0..9000 | -2147483648) MAX-ACCESS read-only STATUS current DESCRIPTION "Elapsed 15Min" ::= { currentEncryptionSublayerPm15minEntry 4 } currentEncryptionSublayerPm1dayTable OBJECT-TYPE SYNTAX SEQUENCE OF CurrentEncryptionSublayerPm1dayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains current encryption-related performance monitoring 1-day values related to channel ports." ::= { encryptionPerformanceMonitoring 4 } currentEncryptionSublayerPm1dayEntry OBJECT-TYPE SYNTAX CurrentEncryptionSublayerPm1dayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Every row of this table represents performance monitoring entry." INDEX { entityIndex } ::= { currentEncryptionSublayerPm1dayTable 1 } CurrentEncryptionSublayerPm1dayEntry ::= SEQUENCE { currentEncryptionSublayerPm1dayEncryptionRunSeconds Unsigned32, currentEncryptionSublayerPm1dayEncryptionRunErrorSeconds Unsigned32, currentEncryptionSublayerPm1dayEncryptionRunDegradeSeconds Unsigned32, currentEncryptionSublayerPm1dayElapsedTime Integer32 } currentEncryptionSublayerPm1dayEncryptionRunSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Encryption running seconds" ::= { currentEncryptionSublayerPm1dayEntry 1 } currentEncryptionSublayerPm1dayEncryptionRunErrorSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Encryption Errored Seconds" ::= { currentEncryptionSublayerPm1dayEntry 2 } currentEncryptionSublayerPm1dayEncryptionRunDegradeSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Encryption in degrade mode seconds" ::= { currentEncryptionSublayerPm1dayEntry 3 } currentEncryptionSublayerPm1dayElapsedTime OBJECT-TYPE SYNTAX Integer32 (0..86400 | -2147483648) MAX-ACCESS read-only STATUS current DESCRIPTION "Elapsed 1Day" ::= { currentEncryptionSublayerPm1dayEntry 4 } -- five index scheme performance monitoring of an encrypted port cryFacilityCurrent15minTable OBJECT-TYPE SYNTAX SEQUENCE OF CryFacilityCurrent15minEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains current encryption-related performance monitoring 15-min values related to channel ports." ::= { encryptionPerformanceMonitoring 10 } cryFacilityCurrent15minEntry OBJECT-TYPE SYNTAX CryFacilityCurrent15minEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Every row of this table represents performance monitoring entry." INDEX { entityFacilityShelfNo, entityFacilitySlotNo, entityFacilityPortNo, entityFacilityExtNo, entityFacilityClassName } ::= { cryFacilityCurrent15minTable 1 } CryFacilityCurrent15minEntry ::= SEQUENCE { cryFacilityCurrent15minEncryptionRunSeconds Unsigned32, cryFacilityCurrent15minEncryptionRunErrorSeconds Unsigned32, cryFacilityCurrent15minEncryptionRunDegradeSeconds Unsigned32, cryFacilityCurrent15minElapsedTime Integer32 } cryFacilityCurrent15minEncryptionRunSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Encryption running seconds" ::= { cryFacilityCurrent15minEntry 1 } cryFacilityCurrent15minEncryptionRunErrorSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Encryption Errored Seconds" ::= { cryFacilityCurrent15minEntry 2 } cryFacilityCurrent15minEncryptionRunDegradeSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Encryption in degrade mode seconds" ::= { cryFacilityCurrent15minEntry 3 } cryFacilityCurrent15minElapsedTime OBJECT-TYPE SYNTAX Integer32 (0..9000 | -2147483648) MAX-ACCESS read-only STATUS current DESCRIPTION "Elapsed 15Min" ::= { cryFacilityCurrent15minEntry 4 } cryFacilityCurrent1dayTable OBJECT-TYPE SYNTAX SEQUENCE OF CryFacilityCurrent1dayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains current encryption-related performance monitoring 1-day values related to channel ports." ::= { encryptionPerformanceMonitoring 11 } cryFacilityCurrent1dayEntry OBJECT-TYPE SYNTAX CryFacilityCurrent1dayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Every row of this table represents performance monitoring entry." INDEX { entityFacilityShelfNo, entityFacilitySlotNo, entityFacilityPortNo, entityFacilityExtNo, entityFacilityClassName } ::= { cryFacilityCurrent1dayTable 1 } CryFacilityCurrent1dayEntry ::= SEQUENCE { cryFacilityCurrent1dayEncryptionRunSeconds Unsigned32, cryFacilityCurrent1dayEncryptionRunErrorSeconds Unsigned32, cryFacilityCurrent1dayEncryptionRunDegradeSeconds Unsigned32, cryFacilityCurrent1dayElapsedTime Integer32 } cryFacilityCurrent1dayEncryptionRunSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Encryption running seconds" ::= { cryFacilityCurrent1dayEntry 1 } cryFacilityCurrent1dayEncryptionRunErrorSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Encryption Errored Seconds" ::= { cryFacilityCurrent1dayEntry 2 } cryFacilityCurrent1dayEncryptionRunDegradeSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Encryption in degrade mode seconds" ::= { cryFacilityCurrent1dayEntry 3 } cryFacilityCurrent1dayElapsedTime OBJECT-TYPE SYNTAX Integer32 (0..86400 | -2147483648) MAX-ACCESS read-only STATUS current DESCRIPTION "Elapsed 1Day" ::= { cryFacilityCurrent1dayEntry 4 } cryFacilityHistorical15minTable OBJECT-TYPE SYNTAX SEQUENCE OF CryFacilityHistorical15minEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains historical encryption-related performance monitoring 15-min values related to channel ports." ::= { encryptionPerformanceMonitoring 12 } cryFacilityHistorical15minEntry OBJECT-TYPE SYNTAX CryFacilityHistorical15minEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Every row of this table represents performance monitoring entry." INDEX { entityFacilityShelfNo, entityFacilitySlotNo, entityFacilityPortNo, entityFacilityExtNo, entityFacilityClassName, cryFacilityHistorical15minNumber } ::= { cryFacilityHistorical15minTable 1 } CryFacilityHistorical15minEntry ::= SEQUENCE { cryFacilityHistorical15minNumber Integer32, cryFacilityHistorical15minEncryptionRunSeconds Unsigned32, cryFacilityHistorical15minEncryptionRunErrorSeconds Unsigned32, cryFacilityHistorical15minEncryptionRunDegradeSeconds Unsigned32, cryFacilityHistorical15minValidFlag TruthValue, cryFacilityHistorical15minTimeStamp DateAndTime } cryFacilityHistorical15minNumber OBJECT-TYPE SYNTAX Integer32 (1..96) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1." ::= { cryFacilityHistorical15minEntry 1 } cryFacilityHistorical15minEncryptionRunSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Informs about time period (seconds) during encryption mode." ::= { cryFacilityHistorical15minEntry 2 } cryFacilityHistorical15minEncryptionRunErrorSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Informs about errorous time period (seconds) during encryption mode." ::= { cryFacilityHistorical15minEntry 3 } cryFacilityHistorical15minEncryptionRunDegradeSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Informs about degraded time period (seconds) during encryption mode." ::= { cryFacilityHistorical15minEntry 4 } cryFacilityHistorical15minValidFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Flag" ::= { cryFacilityHistorical15minEntry 5 } cryFacilityHistorical15minTimeStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp" ::= { cryFacilityHistorical15minEntry 6 } cryFacilityHistorical1dayTable OBJECT-TYPE SYNTAX SEQUENCE OF CryFacilityHistorical1dayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains historical encryption-related performance monitoring 1-day values related to channel ports." ::= { encryptionPerformanceMonitoring 13 } cryFacilityHistorical1dayEntry OBJECT-TYPE SYNTAX CryFacilityHistorical1dayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Every row of this table represents performance monitoring entry." INDEX { entityFacilityShelfNo, entityFacilitySlotNo, entityFacilityPortNo, entityFacilityExtNo, entityFacilityClassName, cryFacilityHistorical1dayNumber } ::= { cryFacilityHistorical1dayTable 1 } CryFacilityHistorical1dayEntry ::= SEQUENCE { cryFacilityHistorical1dayNumber Integer32, cryFacilityHistorical1dayEncryptionRunSeconds Unsigned32, cryFacilityHistorical1dayEncryptionRunErrorSeconds Unsigned32, cryFacilityHistorical1dayEncryptionRunDegradeSeconds Unsigned32, cryFacilityHistorical1dayValidFlag TruthValue, cryFacilityHistorical1dayTimeStamp DateAndTime } cryFacilityHistorical1dayNumber OBJECT-TYPE SYNTAX Integer32 (1..31) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A number, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 1 day interval." ::= { cryFacilityHistorical1dayEntry 1 } cryFacilityHistorical1dayEncryptionRunSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Informs about time period (seconds) during encryption mode." ::= { cryFacilityHistorical1dayEntry 2 } cryFacilityHistorical1dayEncryptionRunErrorSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Informs about errorous time period (seconds) during encryption mode." ::= { cryFacilityHistorical1dayEntry 3 } cryFacilityHistorical1dayEncryptionRunDegradeSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Informs about degraded time period (seconds) during encryption mode." ::= { cryFacilityHistorical1dayEntry 4 } cryFacilityHistorical1dayValidFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Valid Flag" ::= { cryFacilityHistorical1dayEntry 5 } cryFacilityHistorical1dayTimeStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp" ::= { cryFacilityHistorical1dayEntry 6 } cryptoRequestErrorTable OBJECT-TYPE SYNTAX SEQUENCE OF CryptoRequestErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table shows a list of last 100 snmpset requests which failed." ::= { encryptionDiagnostics 1 } cryptoRequestErrorEntry OBJECT-TYPE SYNTAX CryptoRequestErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of cryptoRequestError" INDEX { cryptoRequestErrorId } ::= { cryptoRequestErrorTable 1 } CryptoRequestErrorEntry ::= SEQUENCE { cryptoRequestErrorId Unsigned32, cryptoRequestErrorType FspR7RequestErrorType, cryptoRequestErrorAesSpecific FspR7RequestErrorTypeAes, cryptoRequestErrorTimeStamp DateAndTime } cryptoRequestErrorId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Request ID" ::= { cryptoRequestErrorEntry 1 } cryptoRequestErrorType OBJECT-TYPE SYNTAX FspR7RequestErrorType MAX-ACCESS read-only STATUS current DESCRIPTION "Generic error code" ::= { cryptoRequestErrorEntry 2 } cryptoRequestErrorAesSpecific OBJECT-TYPE SYNTAX FspR7RequestErrorTypeAes MAX-ACCESS read-only STATUS current DESCRIPTION "Specific error code for Encryption Module" ::= { cryptoRequestErrorEntry 3 } cryptoRequestErrorTimeStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp" ::= { cryptoRequestErrorEntry 4 } END