CM-FACILITY-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, IpAddress, Counter64 FROM SNMPv2-SMI DateAndTime, DisplayString, TruthValue, RowStatus, StorageType, MacAddress, VariablePointer, TEXTUAL-CONVENTION FROM SNMPv2-TC Ipv6Address FROM IPV6-TC InterfaceIndex FROM IF-MIB PhysicalIndex FROM ENTITY-MIB neIndex, shelfIndex, slotIndex, f3UsbHostIndex, networkElementEntry FROM CM-ENTITY-MIB fsp150cm FROM ADVA-MIB AdminState, OperationalState, SecondaryState, EthernetMediaType, EthernetPortSpeed, TrafficDirection, SfpConnectorValue, SfpMediaType, VlanId, VlanPriority, VlanTagType, PriorityMapMode, SignalDirectionType, AfpTagControl, VlanEthertype, CmTrafficAclFilterActionType,IpVersion,CmTrafficACLPriorityType, CmTrafficAclFilterType, CmTrafficAclProtocolType, TDMFrequencySourceType, F3DisplayString, FlowSecState, UsbOperationalMode, SfpIdentifierValue FROM CM-COMMON-MIB f3LagIndex FROM F3-LAG-MIB SSMQualityLevel, SquelchControl, TimeSource, ClkSignalType FROM F3-SYNC-MIB; cmFacilityMIB MODULE-IDENTITY LAST-UPDATED "202101270000Z" ORGANIZATION "ADVA Optical Networking SE" CONTACT-INFO "Web URL: http://adva.com/ E-mail: support@adva.com Postal: ADVA Optical Networking SE Campus Martinsried Fraunhoferstrasse 9a 82152 Martinsried/Munich Germany Phone: +49 089 89 06 65 0 Fax: +49 089 89 06 65 199 " DESCRIPTION "This module defines the Facility MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA." REVISION "202101270000Z" DESCRIPTION " Notes from release 202009220000Z, (1) Added new entries to SfpChannelIdentifier TEXTUAL-CONVENTION: frequency-19605, autoTuning. Notes from release 202005120000Z, (1) Added TEXTUAL-CONVENTIONs: PlugType, PlugMode, RelativeChannelIdentifier, ChannelType, OutOfBandChannelStatus, GMetroAutoTuningMode, FrequencyIdentifier, ITUCBandChannelIdentifier. (2) Added cmEthernetAccPortSfpIdentifierValue column to cmEthernetAccPortTable. (3) Added cmEthernetNetPortSfpIdentifierValue column to cmEthernetNetPortTable. (4) Added cmEthernetTrafficPortSfpIdentifierValue, cmEthernetTrafficPortPlugType, cmEthernetTrafficPortPlugMode, cmEthernetTrafficPortPlugGMetroAutoTuningMode, cmEthernetTrafficPortPlugChannelType, cmEthernetTrafficPortPlugITUCbandChannel, cmEthernetTrafficPortPlugRelativeChannel, cmEthernetTrafficPortPlugFrequency, cmEthernetTrafficPortPlugOutOfBandChannelStatus, cmEthernetTrafficPortRemotePlugITUCbandChannel, cmEthernetTrafficPortRemotePlugRelativeChannel, cmEthernetTrafficPortRemotePlugFrequency, cmEthernetTrafficPortRemoteSfpVendorName, cmEthernetTrafficPortRemoteSfpName, cmEthernetTrafficPortRemoteSfpPartNumber, cmEthernetTrafficPortRemoteSfpHardwareRevision, cmEthernetTrafficPortRemoteSfpSerialNumber, cmEthernetTrafficPortRemoteSfpDateOfManufacture, cmEthernetTrafficPortRemoteSfpLinkLength, cmEthernetTrafficPortRemoteSfpLaserWaveLength, cmEthernetTrafficPortRemoteSfpLaserFrequency, cmEthernetTrafficPortRemoteSfpMediaType, cmEthernetTrafficPortRemoteSfpConnectorValue and cmEthernetTrafficPortRemoteSfpIdentifierValue columns to cmEthernetTrafficPortTable. Notes from release 202006040000Z, (1) Added cmEthernetAccPortLoopbackTestReflectorIPv4AddressControl, cmEthernetAccPortLoopbackTestReflectorIPv4Address, cmEthernetAccPortLoopbackTestReflectorIPv6AddressControl, cmEthernetAccPortLoopbackTestReflectorIPv6Address columns to cmEthernetAccPortTable. (2) Added cmEthernetNetPortLoopbackTestReflectorIPv4AddressControl, cmEthernetNetPortLoopbackTestReflectorIPv4Address, cmEthernetNetPortLoopbackTestReflectorIPv6AddressControl, cmEthernetNetPortLoopbackTestReflectorIPv6Address columns to cmEthernetNetPortTable. (3) Added cmEthernetTrafficPortLoopbackTestReflectorIPv4AddressControl, cmEthernetTrafficPortLoopbackTestReflectorIPv4Address, cmEthernetTrafficPortLoopbackTestReflectorIPv6AddressControl, cmEthernetTrafficPortLoopbackTestReflectorIPv6Address columns to cmEthernetTrafficPortTable. Notes from release 202005110000Z, (1) new f3IrigOutputGroupIfIndex (2) new f3IrigOutputGroupEntityIndex Notes from release 202001300000Z, (1) Added f3GPSReceiverPortSpoofingPpsThreshold , f3GPSReceiverPortSpoofingPpsDifference , f3GPSReceiverPortSpoofingLocationThreshold, f3GPSReceiverPortSpoofingLocationDifference , f3GPSReceiverPortGnssDynamicModel (2) New TEXTUAL-CONVENTION:: DynamicModelType - portable, stationary, pedestrian, automotive, sea, airborne_1g, airborne_2g, airborne_4g Notes from release 201912090000Z (1) Added new column to f3PulsePerSecondPortTable: f3PulsePerSecondPortAssumedClockClass (2) Added new column to f3TimeOfDayPortTable: f3TimeOfDayPortAssumedClockClass Notes from release 201912080000Z (1) f3PulsePerSecondPortDelayCompensation SYNTAX Integer32 is redefined to (-5000000..5000000) (2) f3TimeOfDayPortDelayCompensation Integer32 is redefined to (-5000000..5000000) Notes from release 201911240000Z (1) Added new column to f3GPSReceiverPortTable: f3GPSReceiverPortFailureSuspendTime Notes from release 201911210000Z (1) Added TEXTUAL-CONVENTION: CcActivePortState Notes from release 201911190000Z (1) Added TEXTUAL-CONVENTION: CcPortDutyCycle (2) New ccInputPortTable, with columns: ccInputPortIndex, ccInputPortIfIndex, ccInputPortEntityIndex, ccInputPortAlias, ccInputPortAdminState, ccInputPortOperationalState, ccInputPortSecondaryState (3) New ccGroupPortEntry, with columns: ccGroupIndex, ccGroupIfIndex, ccGroupEntityIndex, ccGroupAlias, ccGroupActivePorts, ccGroupPhaseAdjust, ccGroupDutyCycle Notes from release 201910180000Z Added new SNMP table: cmEncapFlowPointTable Notes from release 201909130000Z (1) Added TEXTUAL-CONVENTION: IrigTimeCode, IrigControlField, IrigRelayOperation, IrigOutputType, IrigDigitalSignalVoltage, IrigGroupExtensionType (2) New f3IrigRs422OutputPortTable, with columns: f3IrigRs422OutputPortIndex, f3IrigRs422OutputPortIfIndex, f3IrigRs422OutputPortEntityIndex, f3IrigRs422OutputPortAlias, f3IrigRs422OutputPortAdminState, f3IrigRs422OutputPortOperationalState, f3IrigRs422OutputPortSecondaryState, f3IrigRs422OutputPortTimeCode, f3IrigRs422OutputPortControlField (3) New f3IrigOpticalOutputPortTable, with columns: f3IrigOpticalOutputPortIndex, f3IrigOpticalOutputPortIfIndex, f3IrigOpticalOutputPortEntityIndex, f3IrigOpticalOutputPortAlias, f3IrigOpticalOutputPortAdminState, f3IrigOpticalOutputPortOperationalState, f3IrigOpticalOutputPortSecondaryState, f3IrigOpticalOutputPortTimeCode, f3IrigOpticalOutputPortControlField (4) New f3IrigRelayOutputPortTable, with columns: f3IrigRelayOutputPortIndex, f3IrigRelayOutputPortIfIndex, f3IrigRelayOutputPortEntityIndex, f3IrigRelayOutputPortAlias, f3IrigRelayOutputPortAdminState, f3IrigRelayOutputPortOperationalState, f3IrigRelayOutputPortSecondaryState, f3IrigRelayOutputPortRelayOperation (5) New f3IrigOutputGroupTable, with columns: f3IrigOutputGroupIndex, f3IrigOutputGroupAlias, f3IrigOutputGroupExtensionType, f3IrigOutputGroupExtensionDetection (6) New f3IrigOutputUnitPortTable, with columns: f3IrigOutputUnitPortIndex, f3IrigOutputUnitPortIfIndex, f3IrigOutputUnitPortEntityIndex, f3IrigOutputUnitPortAlias, f3IrigOutputUnitPortAdminState, f3IrigOutputUnitPortOperationalState, f3IrigOutputUnitPortSecondaryState, f3IrigOutputUnitPortTimeCode, f3IrigOutputUnitPortControlField, f3IrigOutputUnitPortType, f3IrigOutputUnitPortDigitalVoltage (7) New Conformance Group: f3IrigPortGroup Notes from release 201909110000Z, (1) New GPS10MHzPortEntry column: - gps10MHzPortInputSignalType Notes from release 201909050000Z (1) New bits8PortGroupTable column: - bits8PortGroupClkIfEnabledPorts Notes from release 201907080000Z, (1) Added f3GPSReceiverPortSelfSurveyPositionAccuracy, f3GPSReceiverPortHorizontalAccuracy, f3GPSReceiverPortVerticalAccuracy, f3GPSReceiverPortTDOP, f3GPSReceiverPortHDOP, f3GPSReceiverPortVDOP Notes from release 201905210000Z (1) Add missing f3PulsePerSecondPortTable column: - f3PulsePerSecondPortAlias (2) Add missing f3TimeOfDayPort column: - f3TimeOfDayPortAlias Notes from release 201903210000Z (1) Added the following to cmEthernetTrafficPortTable - cmEthernetTrafficPortSfpTxPowerLevel - cmEthernetTrafficPortSfpRxPowerLevel Notes from release 201902220000Z (1) New f3Usb3GDCNPortTable columns: - f3Usb3GDCNPortIpAddress - f3Usb3GDCNPortNetMask Notes from release 201901240000Z, (1) Modified f3GPSReceiverPortTable colums: - f3GPSReceiverPortCoordinateAltitude: MAX-ACCESS is reverted to read-only, SYNTAX is reverted to Unsigned32 (2) New f3GPSReceiverPortTable columns: - f3GPSReceiverPortCoordinateStringAltitude with: MAX-ACCESS read-write, SYNTAX DisplayString (3) Modified f3GPSReceiverPortTable colums: - f3GPSReceiverPortCoordinateLatitude: MAX-ACCESS read-write instead read-only - f3GPSReceiverPortCoordinateLongitude: MAX-ACCESS read-write instead read-only - f3GPSReceiverPortCoordinateAltitude: MAX-ACCESS read-write instead read-only, SYNTAX DisplayString instead Unsigned32 (4) New f3GPSReceiverPortTable columns: - f3GPSReceiverPortSelfSurveyControl Notes from release 201901180000Z (1) Added f3GPSReceiverPortAGC Notes from release 201901070000Z (1) Added TEXTUAL-CONVENTION:: SciSignalMode, SciSignalDirection, and SciRxSsmQL (2) Added sciPortTable and sciPortGroup (3) Added TEXTUAL-CONVENTION:: SynceRxSsmQl and SynceMode (3) Added cmEthernetTrafficPortTxSsm, cmEthernetTrafficPortRxSsmQL, cmEthernetTrafficPortSyncEMode, cmEthernetTrafficPortSyncEServiceAvailableTime, cmEthernetTrafficPortSyncEServiceUnavailableTime, and cmEthernetTrafficPortSyncEServiceAvailablePercentage (4) Added qzss(5) to ConstellationTypesBitMap (5) Added TEXTUAL-CONVENTION:: LocationMode and TimeAdvanceMode (6) Added f3GPSReceiverPortLocationMode, f3GPSReceiverPortTimeAdvanceMode, f3GPSReceiverPortTimeAdvanceValue, f3GPSReceiverPortForcedAntennaConnected, f3GPSReceiverPortServiceAvailableTime, f3GPSReceiverPortServiceUnavailableTime, and f3GPSReceiverPortServiceAvailablePercentage (7) Modified f3GPSReceiverPortTable colums: - f3GPSReceiverPortCoordinateLatitude: MAX-ACCESS read-write instead of read-only - f3GPSReceiverPortCoordinateLongitude: MAX-ACCESS read-write instead of read-only (8) New f3GPSReceiverPortTable columns: - f3GPSReceiverPortSelfSurveyControl - f3GPSReceiverPortCoordinateStringAltitude with: MAX-ACCESS read-write, SYNTAX DisplayString Notes from release 201810260000Z (1) New cmFlowPointTable columns - cmFlowPointWfqSegmentationCOS - cmFlowPointWfqGroupCOS - cmFlowPointWfqGroupEirLo - cmFlowPointWfqGroupEirHi (2) New f3FpQosShaperTable column - f3FpQosShaperWfqWeight (3) New cmEthernetTrafficPortTable columns - cmEthernetTrafficPortWfqSegmentationCOS - cmEthernetTrafficPortWfqGroupCOS - cmEthernetTrafficPortWfqGroupEirLo - cmEthernetTrafficPortWfqGroupEirHi (4) New cmTrafficPortQosShaperTable column - cmTrafficPortQosShaperWfqWeight Notes from release 201804300000Z (1) New cmFlowPointTable column added for Elephant Flow management: - cmFlowPointEfIdentificationFields, (2) New textual convention: EfIdentificationFieldType Notes from release 201802210000Z, (1) New bitsPortTable columns: - bitsPortCrc4 - bitsPortIdleCode - bitsPortAis - bitsPortSaBitsAdminState - bitsPortSquelchControl - bitsPortSignalShape - bitsPortSignalFrequency (2) New f3PulsePerSecondPortTable columns: - f3PulsePerSecondPortOutputDelay - f3PulsePerSecondPortWidth - f3PulsePerSecondPortPolarity - f3PulsePerSecondPortImpedance (3) Added BitsPortImpedanceMode literals: - bits-50Ohm(4) (4) Added BitsPortLineType literals: - other(4) (5) New textual conventions: SaBitsState, SignalShape, SignalFrequency, PpsPolarity and PpsPortImpedanceMode Notes from release 201802020000Z (1) Added cmQosFlowPolicerPolicingEnabled to cmQosFlowPolicerTable Notes from release 201706210000Z, (1) New f3GPSReceiverPortTable columns: - f3GPSReceiverPortPDOP (2) Modified f3GPSReceiverPortTable columns: - New value range for f3GPSReceiverPortPDOPMask Notes from release 201703300000Z, (1) New f3GPSReceiverPortTable columns: - f3TimeOfDayPortSignalDirection - f3TimeOfDayPortInputRate - f3TimeOfDayPortDelayCompensation (2) f3PulsePerSecondPortDelayCompensation SYNTAX Integer32 is redefined to (-100000..100000) Notes from release 201703100000Z, (1) New f3GPSReceiverPortTable columns: - f3GPSReceiverPortPDOPMask - f3GPSReceiverPortSelfSurveyPeriod - f3GPSReceiverPortSatMin1Threshold - f3GPSReceiverPortSatMin2Threshold (2) f3GPSReceiverPortGnssSystem STATUS is deprecated Notes from release 201711300000Z (1) New cmFlowPointTable column added: - cmFlowPointAclNoMatchDisposition, (2) New textual convention AclNoMatchDispositionType Notes from release 201706120000Z (1) New cmFlowPointTable columns added for elephant flow management: - cmFlowPointEfEnabled, - cmFlowPointEfIdentificationType, - cmFlowPointEfRateThresholdLo, - cmFlowPointEfRateThresholdHi (2) New textual convention: EfIdentificationType Notes from release 201704100000Z (1) update CmRemoteLinkIds - add bit fields 17 to 26 Notes from release 201703220000Z (1) New f3AclRuleTable column: - f3AclRuleActive Notes from release 201702140000Z (1) New cmEthernetTrafficPortTable columns: - cmEthernetTrafficPortExpDEEncType, - cmEthernetTrafficPortExpDEPairsAction (2) New tables: - f3EthernetTrafficPortExpDEEncTable, - f3EthernetTrafficPortExpDEDecTable, - f3EthernetTrafficPortExpDEPairTable Notes from release 201612140000Z (1) New cmFlowPointTable columns: - cmFlowPointRefElpObject Notes from release 201611280000Z, (1) New textual conventions: SatelliteHealth, DelayOption (2) Added f3SatelliteTable (3) New f3GPSReceiverPortTable columns: - f3GPSReceiverPortAntennaDelayValue - f3GPSReceiverPortAntennaDelayType - f3GPSReceiverPortCNOMask - f3GPSReceiverPortElevationMask - f3GPSReceiverPortCoordinateLatitude - f3GPSReceiverPortCoordinateLongitude - f3GPSReceiverPortCoordinateAltitude Notes from release 201610190000Z (1) New cmFlowPointTable columns: - cmFlowPointElmiEvcIdentifier Notes from release 201610050000Z (1) Added f3AclRuleTable. Notes from release 201609130000Z (1) New cmFlowPointTable columns: - cmFlowPointRefEoMplsPwObject Notes from release 201607110000Z (1) New cmEthernetTrafficPortTable columns: - cmEthernetTrafficPortIngressSwapPriorityVIDEnabled, - cmEthernetTrafficPortEgressSwapPriorityVIDEnabled, - cmEthernetTrafficPortSwapPriorityVID Notes from release 201607110000Z (1) renamed the type FlowSecureState to FlowSecState Notes from release 201606070000Z, (1) New cmEthernetTrafficPortTable columns: - cmEthernetTrafficPortMode, - cmEthernetTrafficPortServiceType, - cmEthernetTrafficPortLoopbackSourceMacControlEnabled, - cmEthernetTrafficPortLoopbackDestMacControlEnabled, - cmEthernetTrafficPortLoopbackSourceMacAddress, - cmEthernetTrafficPortLoopbackDestMacAddress, - cmEthernetTrafficPortLoopbackBlockingEnabled, - cmEthernetTrafficPortMediaTypeAutoSelected, - cmEthernetTrafficPortLowLatencyQueuingEnabled, - cmEthernetTrafficPortDiagnosticMacAddress (2) New cmFlowPointTable columns: - cmFlowPointEgressShapingType, - cmFlowPointEgressInnerTagPrioMapEnabled, - cmFlowPointAutoBandwidthConfigEnabled, - cmFlowPointAutoCIRPercentage, - cmFlowPointFrameFwdEnabled, - cmFlowPointUsePortPrioMapProfile (3) Added cmEthernetTrafficPortExtTable. (4) Added cmEthernetTrafficPortJdsuExtTable. (5) Added f3FpQosShaperTable. (6) Added f3FpQosPolicerTable. Notes from release 201607110000Z (1) renamed the type FlowSecureState to FlowSecState Notes from release 201601200000Z (1) add f3GPSReceiverPortAlias to f3GPSReceiverPortTable (2) add f3GPSReceiverPortGnssSystemsBitMap to f3GPSReceiverPortTable Notes frome release 201505010000Z, (1) Added cmEthernetAccPortDiagnosticMacAddress (2) Added cmEthernetNetPortDiagnosticMacAddress Notes frome release 201410150000Z, (1) Removed CmLinkLossFwdTriggerTypes literals: - trig-opu-ais, - trig-eth-epc. (2) Removed CmLinkLossFwdTxActionType literal: - llf-eth-epc. Notes from release 201408270000Z, (1) Added TxDeiAction TEXTUAL-CONVENTION. (2) Added RxDeiAction TEXTUAL-CONVENTION. (3) Added DeiOuterTagType TEXTUAL-CONVENTION. (4) New cmEthernetAccPortTable columns: - cmEthernetAccPortRxDeiAction - cmEthernetAccPortTxDeiAction - cmEthernetAccPortRxDeiOuterTagType - cmEthernetAccPortTxDeiOuterTagType (5) New cmEthernetNetPortTable columns: - cmEthernetNetPortRxDeiAction - cmEthernetNetPortTxDeiAction - cmEthernetNetPortRxDeiOuterTagType - cmEthernetNetPortTxDeiOuterTagType Notes from release 201407180000Z, (1) Added new CmLoopbackType literals: - facility-och, - facility-och-timed, - terminal-och, - terminal-och-timed. (2) Added new CmLinkLossFwdSignalType literals: - llf-odu-ais, - llf-odu-lck, - llf-odu-tim, - llf-odu-bdi, - llf-opu-plm, - llf-opu-csf, - llf-eth-epc. (3) Added new CmLinkLossFwdTriggerTypes literals: - trig-odu-ais, - trig-odu-lck, - trig-odu-tim, - trig-odu-bdi, - trig-opu-ais, - trig-opu-plm, - trig-opu-csf, - trig-eth-epc. (4) Added new CmLinkLossFwdTxActionType literals: - llf-eth-epc, - llf-odu-ais, - llf-opu-csf, - llf-otu-ais. (5) Added new XgePhyType literal: - otn. Notes from release 201406250000Z, (1) New cmEthernetAccPortTable columns: - cmEthernetAccPortLowLatencyQueuingEnabled, - cmEthernetAccPortA2nSwapPriorityVIDEnabled, - cmEthernetAccPortN2aSwapPriorityVIDEnabled, - cmEthernetAccPortSwapPriorityVID. (2) New cmEthernetNetPortTable column: - cmEthernetNetPortLowLatencyQueuingEnabled. (3) Added new literal for FlowTrafficType: - policed-only. (4) Added new literal for ShapingType: - llq. Notes from release 201405210000Z, (1) New cmEthernetAccPortTable column: - cmEthernetAccPortMediaTypeAutoSelected. (2) New cmEthernetNetPortTable column: - cmEthernetNetPortMediaTypeAutoSelected. Notes from release 201405050000Z, (1) New SfpChannelIdentifier literals: - frequency-19195, - frequency-19190, - frequency-19185, - frequency-19180, - frequency-19175, - frequency-19170, - frequency-19165, - frequency-19160, - frequency-19155, - frequency-19150, - frequency-19145, - frequency-19140, - frequency-19135, - frequency-19130, - frequency-19125. Notes from release 201404240000Z, (1) New cmQosShaperTable objects: - cmQosShaperSoamCIRLo, - cmQosShaperSoamCIRHi, - cmQosShaperSoamEIRLo, - cmQosShaperSoamEIRHi. (2) New cmAccPortQosShaperTable objects: - cmAccPortQosShaperSoamCIRLo, - cmAccPortQosShaperSoamCIRHi, - cmAccPortQosShaperSoamEIRLo, - cmAccPortQosShaperSoamEIRHi. Notes from release 201404170000Z, (1) New cmEthernetAccPortTable objects: - cmEthernetAccPortLaserWDMChannel, - cmEthernetAccPortLaserIsTunable, - cmEthernetAccPortLaserFrequency. (2) New cmEthernetNetPortTable objects: - cmEthernetNetPortLaserWDMChannel, - cmEthernetNetPortLaserIsTunable, - cmEthernetNetPortLaserFrequency. Notes from release 201310210000Z, (1) Deleted cmEthernetAccPortTable object: - cmEthernetAccPortMonitorPortEnabled, - cmEthernetAccPortBufferSize, - cmEthernetAccPortJDSUControlFramesSnoopingEnabled, - cmEthernetAccPortJDSULoopbackVlan. (2) Deleted cmEthernetNetPortTable object: - cmEthernetNetPortJDSUControlFramesSnoopingEnabled, - cmEthernetNetPortJDSULoopbackVlan. (3) Added tables: - cmEthernetAccPortJdsuExtTable, - cmEthernetNetPortJdsuExtTable. Notes from release 201310140000Z, (1) New cmEthernetAccPortTable objects: - cmEthernetAccPortMonitorPortEnabled, - cmEthernetAccPortBufferSize. Notes from release 201310070000Z, (1) Deleted cmEthernetAccPortTable object: - cmEthernetAccPortJDSUUnitTextId. (2) Deleted cmEthernetNetPortTable object: - cmEthernetNetPortJDSUUnitTextId. Notes from release 201310030000Z, (1) New gps10MHzPortTable object: gps10MHzPortAssumedQL Notes from release 201309160000Z, (1) Added new literals for CmLoopbackType: - jdsu-terminal-port-tailend, - jdsu-terminal-vlan-tailend, - jdsu-facility-port-tailend, - jdsu-facility-vlan-tailend. (2) New cmEthernetAccPortTable objects: - cmEthernetAccPortJDSUControlFramesSnoopingEnabled, - cmEthernetAccPortJDSULoopbackVlan, - cmEthernetAccPortJDSUUnitTextId. (3) New cmEthernetNetPortTable objects: - cmEthernetNetPortJDSUControlFramesSnoopingEnabled, - cmEthernetNetPortJDSULoopbackVlan, - cmEthernetNetPortJDSUUnitTextId. Notes from release 201306100000Z, (1) Added table: networkElementTMParamsTable (2) Added TEXTUAL-CONVENTION: BandwidthProfileMode (3) Added group: networkElementTMParamsGroup Notes frome release 201305230000Z, (1) New cmEthernetAccPortTable objects: - cmEthernetAccPortLoopbackSourceMacControlEnabled, - cmEthernetAccPortLoopbackDestMacControlEnabled, - cmEthernetAccPortLoopbackSourceMacAddress, - cmEthernetAccPortLoopbackDestMacAddress, - cmEthernetAccPortLoopbackBlockingEnabled (2) New cmEthernetNetPortTable objects: - cmEthernetNetPortLoopbackSourceMacControlEnabled, - cmEthernetNetPortLoopbackDestMacControlEnabled, - cmEthernetNetPortLoopbackSourceMacAddress, - cmEthernetNetPortLoopbackDestMacAddress, - cmEthernetNetPortLoopbackBlockingEnabled Notes from release 201303140000Z, (1) New cmFlowTable object: cmFlowN2NForwardingEnabled Notes from release 201210150000Z, (1) New cmFlowTable objects: cmFlowPort1, cmFlowPort2, cmFlowPolicingControl, cmFlowAutoCIRPercentage, cmFlowLoopAvoidanceObject Notes from release 201207190000Z, (1) New textual conventions: OCNSTMPortType, E1T1LineType, E1T1LineCode, E1T1FrameFormat, E1T1RcvSensitivity (2) New ocnStmTable object: ocnStmPortType (3) New e1T1Table objects: e1t1LineType, e1t1LineCode, e1t1FrameFormat, e1t1LineBuildOut, e1T1TimingDomain, e1T1RcvSensitivity, e1T1IdlePatternProfile, e1T1LoopbackProfile Notes from release 201106110000Z, -Added f3PulsePerSecondPortTable, f3TimeOfDayPortTable Notes from release 201205020000Z, -CPD support for LLDP and ELMI for Access/Network Port, Flow CPD Notes from release 201105270000Z, -Formalized the OBJECT-GROUP definitions Notes from release 201102100000Z (i)Added variable bitsPortLineBuildOut Notes from release 201101250000Z (i)Added enc-custom to PcpDEEncType Notes from release 201010130000Z PCP based Drop Eligibility function is added, (i)New textual conventions PcpDEEncType, PcpDEPairsAction (ii)New Access Port objects cmEthernetAccPortDeiEnable, cmEthernetAccPortPcpDEEncType, cmEthernetAccPortPcpDEPairsAction (iii)New Network Port objects cmEthernetNetPortDeiEnable, cmEthernetNetPortPcpDEEncType, cmEthernetNetPortPcpDEPairsAction (iv)New Access Port tables cmAccPortPcpDEEncTable, cmAccPortPcpDEDecTable, cmAccPortPcpDEPairTable (v)New Network tables cmNetPortPcpDEEncTable, cmNetPortPcpDEDecTable, cmNetPortPcpDEPairTable Notes from release 201010130000Z (i)Added cmFlowN2AOuterTagPrioEnabled, cmEthernetNetPortPrioMapMode and cmNetPortPrioMapTable to support the Network Port Priority Mapping function (ii)Added FlowTagControl of pop Notes from release 201006100000Z Updated range of cmEthernetAccPortOuterVlanLoopbackMask, cmEthernetAccPortInnerVlanLoopbackMask, cmEthernetNetPortOuterVlanLoopbackMask, cmEthernetNetPortInnerVlanLoopbackMask, to INTEGER(0..16) to indicate mask not SET Notes from release 201003310000Z (1)cmFlowTable has two new objects cmFlowPreserveSTagProperties, cmFlowInnerTagPrioEnabled, cmPrioMapInnerTagPriority Notes from release 201002120000Z (1)cmFlowTable has new object cmFlowPolicingEnabled (2)New table ieee1588EthernetPortTable represents the IEEE 1588 Ethernet Port (3)New table gps10MHzPortTable represents the 10MHz Port Notes from release 200903160000Z This release is applicable to the FSP150CC Release 4.1 devices GE206. Following new objects are added to cmEthernetAccPortEntry, cmEthernetAccPortMDIXStatus, cmEthernetAccPortSfpReach, cmEthernetAccPortSfpLaserWaveLength, cmEthernetAccPortSfpMediaType, cmEthernetAccPortOamEnabled, cmEthernetAccPortShapingEnabled, cmEthernetAccPortShapedSpeedLo, cmEthernetAccPortShapedSpeedHi, cmEthernetAccPortQinQEtherType, cmEthernetAccPortRxPauseEnabled, cmEthernetAccPortAutoDiagEnabled, cmEthernetAccPortLinkLossFwdTxActionType, cmEthernetAccPortN2AVlanTrunkingEnabled, cmEthernetAccPortA2NPushPVIDEnabled, cmEthernetAccPortN2APopPVIDEnabled, cmEthernetAccPortPortVlanId, cmEthernetAccPortPortVlanPriority, cmEthernetAccPortPrioMapMode, cmEthernetAccPortSyncEEnabled, cmEthernetAccPortQLModeEnabled, cmEthernetAccPortExpectedQL, cmEthernetAccPortAssumedQL, cmEthernetAccPortReceivedQL, cmEthernetAccPortTransmitQL, cmEthernetAccPortDeiEnable, cmEthernetAccPortPcpDEEncType, cmEthernetAccPortPcpDEPairsAction, Following new objects are added to cmFlowEntry, cmFlowTrafficType, cmFlowCOS, cmFlowVlanMemberList, cmFlowAction, cmFlowActionVlan, cmFlowUntaggedMemberEnabled, cmFlowA2NCIRHi, cmFlowA2NEIRHi, cmFlowN2ACIRHi, cmFlowN2AEIRHi, cmFlowHCOSMgmtEnabled, cmFlowGuaranteedA2NBandwidthLo, cmFlowGuaranteedA2NBandwidthHi, cmFlowMaximumA2NBandwidthLo, cmFlowMaximumA2NBandwidthHi, cmFlowCTagControl, cmFlowCTagVlanId, cmFlowCTagVlanPriority, cmFlowCTagMatchRxPrio, cmFlowSTagControl, cmFlowSTagVlanId, cmFlowSTagVlanPriority, cmFlowOuterTagPrioEnabled, cmFlowESFramesLossThreshold, cmFlowSESFramesLossThresholdRatio, Following new objects are added to cmQosShaperEntry, cmQosShaperCOS, cmQosShaperCIRHi, cmQosShaperEIRHi Following new objects are added to cmEthernetNetPortEntry, cmEthernetNetPortMDIXStatus, cmEthernetNetPortSfpReach, cmEthernetNetPortSfpLaserWaveLength, cmEthernetNetPortSfpMediaType, cmEthernetNetPortOamEnabled, cmEthernetNetPortShapingEnabled, cmEthernetNetPortShapedSpeedLo, cmEthernetNetPortShapedSpeedHi, cmEthernetNetPortQinQEtherType, cmEthernetNetPortAutoDiagEnabled, cmEthernetNetPortLinkLossFwdTxActionType, cmEthernetNetPortSyncEEnabled, cmEthernetNetPortQLModeEnabled, cmEthernetNetPortExpectedQL, cmEthernetNetPortAssumedQL, cmEthernetNetPortReceivedQL, cmEthernetNetPortTransmitQL, cmEthernetNetPortPrioMapMode, cmEthernetNetPortDeiEnable, cmEthernetNetPortPcpDEEncType, cmEthernetNetPortPcpDEPairsAction, Following new objects are added to cmEthernetMgmtPortEntry, cmEthernetMgmtPortMDIXStatus Following SNMP tables are new, cmPrioMapTable, cmQosFlowPolicerTable, cmAccPortQosShaperTable, cmEthernetAccPortCpdV2Table, cmFlowCpdV2Table, cmEthernetNetPortCpdV2Table, bitsPortTable Enumeration literals use-group-setting, not-active added to TC CmControlProtocolDispType Notes from release 200803030000Z, (1)MIB version ready for release FSP150CM 3.1." ::= {fsp150cm 4} -- -- OID definitions -- cmFacilityObjects OBJECT IDENTIFIER ::= {cmFacilityMIB 1} cmFacilityConformance OBJECT IDENTIFIER ::= {cmFacilityMIB 2} -- -- Textual Conventions -- LocationMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes location mode for the GNSS receiver on OSA540X." SYNTAX INTEGER { not-applicable(0), navigation (1), survey-in (2), fixed (3) } TimeAdvanceMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes time advance mode for the GNSS on OSA540X." SYNTAX INTEGER { not-applicable(0), auto (1), fixed (2) } SynceRxSsmQl ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes how RX quality level is utilized on OSA540X ethernet port." SYNTAX INTEGER { not-applicable(0), ql-dnu (1), ssm-based (2), ql-prc (3) } SynceMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes SyncE mode (master or slave) on OSA540X ethernet port." SYNTAX INTEGER { not-applicable(0), slave (1), master (2) } SciSignalMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the SCI Port Signal Mode." SYNTAX INTEGER { not-applicable(0), sci-1pps (1), sci-2M (2), sci-10M (3) } SciSignalDirection ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the SCI Port Signal Direction." SYNTAX INTEGER { not-applicable(0), output (1), input (2) } SciRxSsmQL ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the SCI Port QL." SYNTAX INTEGER { not-applicable(0), prc (1), dnu (2) } XDSLAnnex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specify xdsl annex version depends on modulation. annexa -- Annex A annexb -- Annex B annexc -- Annex C annexl -- ADSL2+ Annex L annexm -- ADSL2+ Annex M" SYNTAX INTEGER { notApplicable (0), annexa (1), annexb (2), annexc (3), annexl (4), annexm (5) } XDSLMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The xdsl mode." SYNTAX INTEGER { notApplicable (0), vdsl2 (1), adsl2Plus (2), adsl2 (3), unkown (4) } XDSLCarrierSet ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The xdsl carrier set." SYNTAX INTEGER { notApplicable (0), auto (1), a43 (2), b43 (3), v43 (4), a43c (5) } XDSLStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The vdsl status." SYNTAX INTEGER { notApplicable (0), showtime (1), training (2), handshake (3), idle (4), other (5) } XDSLControlChannel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The xdsl control channel." SYNTAX INTEGER { notApplicable (0), none (1), pppoe (2) } VDSLProfileField ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The vdsl profile." SYNTAX INTEGER { notApplicable (0), unknown (1), profile-8a (2), profile-8b (3), profile-8c (4), profile-8d (5), profile-12a (6), profile-12b (7), profile-17a (8), profile-30a (9) } VDSLProfileFields ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The vdsl profile, no bit set means unknow." SYNTAX BITS { profile-8a(0), profile-8b(1), profile-8c(2), profile-8d(3), profile-12a(4), profile-12b(5), profile-17a(6), profile-30a(7) } XDSLModulationMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specify xdsl modulation type." SYNTAX INTEGER { notApplicable (0), vdsl2 (1) } PPPoEConnectionStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specify pppoe connection status." SYNTAX INTEGER { notApplicable (0), connected (1), connecting (2), disconnected (3) } CmEthernetSvcPortMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Ethernet Service Port Mode Type." SYNTAX INTEGER { connection-oriented (1), connection-less (2) } CmEthernetSvcType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Ethernet Service Type. epl - Ethernet Private Linei, Port-based, all-to-one bundling evpl - Ethernet Virtual Private Line, VLAN based, service multiplexed." SYNTAX INTEGER { epl (1), evpl (2) } CmEthernetTrafficSvcType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Ethernet Service Type, including port-based and vlan-based." SYNTAX INTEGER { all-to-one(1), service-multiplexing(2) } CmAclConfiguration ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object is defined to set traffic acl resource allocation. Supported actions are: all-bk-l2 (1) - all bank allocated to l2. all-bk-l2-ipv4(2) - all bank allocated to l2/ipv4. two-bk-l2-ipv4(3) - two thirds allocated to l2/ipv4, the left belongs to ipv6. one-bk-l2-ipv4(4) - one thirds allocated to l2/ipv4, the left belongs to ipv6. none-bk-l2-ipv4(5) - all bank allocated to ipv6. " SYNTAX INTEGER { all-bk-l2 (1), all-bk-l2-ipv4 (2), two-bk-l2-ipv4 (3), one-bk-l2-ipv4 (4), none-bk-l2-ipv4(5) } CmAfpType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Ethernet Acceptable Framing Policy Type." SYNTAX INTEGER { tagged (1), untagged (2), all (3) } CmEthernetDiagAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Ethernet Diagnosis Action. autoNeg - Auto negotiation capability, cable - Cable diagnostics, cable fault loopback- Terminal loopback with traffic injection and monitoring efm-oam-lpbk- EFM OAM loopback all - autoNeg, cable tests and loopback, not include efm-oam-lpbk." SYNTAX INTEGER { not-applicable(0), autoneg (1), cable (2), loopback (3), efm-oam-lpbk (4), all (5) } CmDiagCableCondType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Ethernet Diagnosis Cable Condition Result." SYNTAX INTEGER { not-applicable(0), cableshort (1), cableopen (2), cableimpedance (3), cablenotfound (4), cableok (5), cablefailed (6), cablenotrun(7) } CmDiagAutoNegCondType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Ethernet Diagnosis Auto Negotiation Condition Result." SYNTAX INTEGER { not-applicable(0), autonegok (1), autonegfailed (2), autonegnotrun (3) } CmDiagLpbkCondType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Ethernet Diagnosis Loopback Condition Result." SYNTAX INTEGER { not-applicable(0), lpbkok(1), lpbkfailed (2), lpbknotrun (3) } CmDiagEfmOamLpbkCondType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Ethernet Diagnosis EFM OAM Loopback Condition Result." SYNTAX INTEGER { not-applicable(0), efmlpbkok (1), efmlpbkfailed (2), efmlpbkfailednendNA (3), efmlpbkfailedfendNA (4), efmlpbknotrun (5) } CmDiagTestStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "ECPA Test Status." SYNTAX INTEGER { not-applicable(0), initial (1), in-progress (2), stopped (3), completed (4), aborted (5) } CmControlProtocolFilterType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Control Protocol Filter Types." SYNTAX INTEGER { efmoam(1), pause(2) } CmLoopbackType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Loopback Types." SYNTAX INTEGER { lpbk-none (1), efm-oam-remote(2), efm-oam-remote-timed(3), facility-port(4), facility-port-timed(5), facility-vlan(6), terminal-port(7), terminal-port-timed(8), terminal-vlan(9), efm-oam-tailend(10), facility-payload(11), facility-payload-timed(12), remote-facility(13), remote-facility-payload(14), tailend-facility(15), tailend-facility-payload(16), terminal-itag(17), facility-itag(18), jdsu-terminal-port-tailend(19), jdsu-terminal-vlan-tailend(20), jdsu-facility-port-tailend(21), jdsu-facility-vlan-tailend(22), facility-och(23), facility-och-timed(24), terminal-och(25), terminal-och-timed(26), jdsu-facility-port-l3-tailend(27), jdsu-facility-vlan-l3-tailend(28) } CmSwapSADAType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the SWAP SADA Types supported. no-swapSADA - No swapping of Source MAC and Destination MAC swapSADA - Do swapping of Source MAC and Destination MAC swapDAOverrideSA - Swap Destination MAC as Source MAC, override source MAC with local MAC swapSADAMacOnly - Not supported swapDAOverridesSAMacOnly - Not supported swapIP - Do swapping of Source MAC and Destination MAC, Source IP and Destination IP swapTCPUDP - Do swapping of Source MAC and Destination MAC, Source IP and Destination IP, Source TCP/UDP port and Destination TCP/UDP port." SYNTAX INTEGER { not-applicable(0), noswapSADA(1), swapSADA (2), swapDAOverrideSA (3), swapSADAMacOnly (4), swapDAOverridesSAMacOnly (5), swapIP(6), swapTCPUDP(7) } CmControlProtocolDispType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Protocol Disposition Type on an interface." SYNTAX INTEGER { not-applicable(0), discard (1), peer (2), pass-thru (3), -- use-group-setting(4), -- Deprecated -- not-active(5), use-port-setting(6), -- pass-thru-l2pt(7), -- Layer 2 Protocol Tunneling useMacSetting(8) } CmLinkLossFwdSignalType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Link Loss Forwarding Signal Types." SYNTAX INTEGER { not-applicable(0), llf-efm-signal(1), llf-link-down(2), llf-odu-ais(3), llf-odu-lck(4), llf-odu-tim(5), llf-odu-bdi(6), llf-opu-plm(7), llf-opu-csf(8), llf-eth-epc(9) } CmLinkLossFwdTriggerTypes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Link Loss Forwarding Trigger Types." SYNTAX BITS { trig-efm-signal(1), trig-link-down(2), trig-odu-ais(3), trig-odu-lck(4), trig-odu-tim(5), trig-odu-bdi(6), trig-opu-plm(7), trig-opu-csf(8) } CmLinkLossFwdTxActionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Link Loss Forwarding Tx Action Types." SYNTAX INTEGER { not-applicable(0), llf-tx-no-action(1), -- perform no link loss forwarding action llf-tx-efm-signal(2),-- EFM signal llf-tx-link-down(3), -- Link Down llf-odu-ais(4), llf-opu-csf(5), llf-otu-ais(6) } CmRemoteLinkIds ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Remote Link Ids used to match for Link Loss Forwarding." SYNTAX BITS { remoteLinkId1(1), remoteLinkId2(2), remoteLinkId3(3), remoteLinkId4(4), remoteLinkId5(5), remoteLinkId6(6), remoteLinkId7(7), remoteLinkId8(8), remoteLinkId9(9), remoteLinkId10(10), remoteLinkId11(11), remoteLinkId12(12), remoteLinkId13(13), remoteLinkId14(14), remoteLinkId15(15), remoteLinkId16(16), remoteLinkId17(17), remoteLinkId18(18), remoteLinkId19(19), remoteLinkId20(20), remoteLinkId21(21), remoteLinkId22(22), remoteLinkId23(23), remoteLinkId24(24), remoteLinkId25(25), remoteLinkId26(26) } CmOamMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the OAM Mode." SYNTAX INTEGER { unknown (0), active (1), passive (2) } CmOamAdminState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the OAM Admin State." SYNTAX INTEGER { not-applicable(0), enabled (1), disabled (2) } CmOamDiscoveryState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the OAM Discovery State." SYNTAX INTEGER { unknown (0), fault (1), activesendlocal (2), passivewait (3), sendlocalremote (4), sendlocalremoteok (5), sendany (6) } CmFlowType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Ethernet Flow Type. portbased - Port based Flow with full bandwidth of port; this Flow does not do VLAN/MAC based processing regular - Connection-oriented, VLAN based service default - Connection-oriented, service that matches all VLANs." SYNTAX INTEGER { portbased (1), regular (2), default (3) } CmEthernetMDIXType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Ethernet MDIX Type. auto-mdix - Auto MDIX crossed - Crossed uncrossed - Uncrossed." SYNTAX INTEGER { not-applicable (1), auto-mdix (2), crossed (3), uncrossed (4), notAvailable (5) } FlowTrafficType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Flow Traffic Type. shaped-only, policed-shaped, policed-only." SYNTAX INTEGER { shaped-only (1), policed-shaped (2), policed-only (3) } FlowVlanActionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Ethernet Flow Action. Used for adding/removing VLAN members" SYNTAX INTEGER { no-action (1), add-vlan (2), remove-vlan (3) } FlowTagControl ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Ethernet Flow Tag Control Type." SYNTAX INTEGER { none (1), push (2), swapvid (3), pushvid (4), pop(5), pushisid(6) } PrioMapControlType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Priority Mapping Control Type." SYNTAX INTEGER { none (1), swap (2) } PolicerAlgorithmType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Policer Algorithm Type." SYNTAX INTEGER { srTCM (1), trTCM (2) } PolicerColorMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Policer Color Mode." SYNTAX INTEGER { color-aware (1), color-blind (2) } BitsPortType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for BITS Port Type. bits-in, bits-out." SYNTAX INTEGER { bits-in(1), bits-out(2) } BitsPortLineType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for BITS Line Type. It can be t1, e1, 2048kHz, other." SYNTAX INTEGER { t1(1), e1(2), type-2048kHz(3), other(4) } BitsPortLineCode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for BITS Line Code. none, t1-b8zs, t1-ami, e1-hdb3, e1-ami." SYNTAX INTEGER { none(1), t1-b8zs (2), t1-ami (3), e1-hdb3 (4), e1-ami (5) } BitsFrameFormat ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for Bits Frame Format. none, t1-sf, t1-esf, e1-unframed, e1-crc4, e1-dualframe." SYNTAX INTEGER { none(1), t1-sf(2), t1-esf(3), e1-unframed(4), e1-crc4(5), e1-dualframe(6) } SaBitDesignation ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for SA Bit Desgination. none, bit4, bit5, bit6, bit7, bit8." SYNTAX INTEGER { none(1), bit4(2), bit5(3), bit6(4), bit7(5), bit8(6) } CmActiveControlProtocolsType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Remote Link Ids used to match for Link Loss Forwarding." SYNTAX BITS { ciscoGroup(1), isl(2), pagp(3), udld(4), cdp(5), vtp(6), dtp(7), pvstpplus(8), uplinkfast(9), vlanbridge(10), l2pt(11), bridgegroup(12), bpdu(13), pause(14), lacp(15), lacpmarker(16), efmoam(17), ssm(18), portauthen(19), bridgereserved(20), lanbridges(21), garpgroup(22), gmrp(23), gvrp(24), garp(25), -- lldp(26), elmi(27), -- mac00(28), mac01(29), mac02(30), mac03(31), mac04(32), mac05(33), mac06(34), mac07(35), mac08(36), mac09(37), mac0A(38), mac0B(39), mac0C(40), mac0D(41), mac0E(42), mac0F(43), -- nearestlldp(44), nontpmrlldp(45), customerlldp(46), ptpNonfwdUntagged(47), ptpNonfwdTagged(48) } PcpDEEncType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for PCP Drop Eligibility Encode Type. enc-none, enc-7p1d, enc-6p2d, enc-5p3d, enc-custom." SYNTAX INTEGER { enc-none(1), enc-7p1d(2), enc-6p2d(3), enc-5p3d(4), enc-custom(5) } PcpDEPairsAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " none, apply-pairs." SYNTAX INTEGER { none(0), apply-pairs(1) } LineBuildOut ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " none, 0-133ft, 133-266ft, 266-399ft, 399-533ft, 533-655ft, 7dot5db, 15db, 22dot5db." SYNTAX INTEGER { none(0), lbo-0-133ft(1), lbo-133-266ft(2), lbo-266-399ft(3), lbo-399-533ft(4), lbo-533-655ft(5), lbo-7dot5db(6), lbo-15db(7), lbo-22dot5db(8) } BitsPortImpedanceMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the impedance mode of the BITS-IN and BITS-OUT interfaces: 120OHM." SYNTAX INTEGER { bits-120Ohm(1), bits-100Ohm(2), bits-75Ohm(3), bits-50Ohm(4) } ShapingType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " port-based - traffic shaping at Port level flow-based - traffic shaping at Flow level llq - low latency queuing" SYNTAX INTEGER { port-based(1), flow-based(2), llq(3) } XgePhyType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " Specifies the Ethernet 10G port PHY type. not-applicable - for non-10G ports lan - 10G LAN-PHY mode (10GBASE-R) operating at 10Gb/sec wan - 10G WAN-PHY mode (10GBASE-W) operating at 9.29Gb/sec " SYNTAX INTEGER { not-applicable(0), lan(1), wan(2), otn(3) } F3Usb3GDCNPINCodeActionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the 3G Dcn Pin Code Action Types." SYNTAX INTEGER { not-applicable(0), enable-pin(1), disable-pin(2), change-pin(3), authentication-pin(4), unlock-pin(5) } F3Usb3GSimCardState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the 3G Usb Sim Card States." SYNTAX INTEGER { not-applicable(0), ok(1), notinserted(2), networkrejected(3), unknown(4) } F3Usb3GNetworkConnectionState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Connection State of the 3G Usb Modem." SYNTAX INTEGER { not-applicable(0), connecting(1), connected(2), disconnected(3) } F3Usb3GRecvSignalStrengthInd ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Recived Signal Strength of the 3G Usb Modem." SYNTAX INTEGER { not-applicable(0), high(1), medium(2), low(3), none(4) } TrailTraceFormat ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Trail Trace Format." SYNTAX INTEGER { not-applicable (0), onebytemode (1), sixteenbytemode (2), sixtyfourbytemode (3) } MultiplexingStructure ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Multiplexing Structure." SYNTAX INTEGER { not-applicable (0), vt-sts1 (1), sts1spe-sts1 (2), sts3cspe-sts3c (3), vc12-vc4-aug (4), vc12-vc3-aug (5), vc3-aug (6), vc3-vc4-aug (7), vc4-aug (8), custom (9) } EoTDMMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the EoTDM Mode." SYNTAX INTEGER { not-applicable (0), eosdh (1), eopdh (2) } BitErrRate ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "." SYNTAX INTEGER { none (0), ber-1e-1 (1), ber-1e-2 (2), ber-1e-3 (3), ber-1e-4 (4), ber-1e-5 (5), ber-1e-6 (6), ber-1e-7 (7), ber-1e-8 (8), ber-1e-9 (9), ber-1e-10 (10) } GFPEncapsulationType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the GFP Encapsulation of the traffic port." SYNTAX INTEGER { none(0), gfp (1), gfp-fcs (2), gfp-novcat (3), gfp-zerovcat (4), gfp-fcs-novcat (5), gfp-fcs-zerovcat (6), x86 (7) } PPSInputRate ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the PPS Input Rate." SYNTAX INTEGER { pulse-per-sec(1), pulse-per-2sec(2) } PPSPhyInterfaceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the PPS physical interface type." SYNTAX INTEGER { none(0), pps(1), tod(2) } OCNSTMPortType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "OCN/STM Port Type." SYNTAX INTEGER { oc12(1), oc3(2), stm4(3), stm1(4) } E1T1LineType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for E1/T1 Line Type. t1, e1" SYNTAX INTEGER { t1(1), e1(2) } E1T1LineCode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for E1/T1 Line Code. none, t1-b8zs, t1-ami, e1-hdb3, e1-ami." SYNTAX INTEGER { none(1), t1-b8zs (2), t1-ami (3), e1-hdb3 (4), e1-ami (5) } E1T1FrameFormat ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for E1/T1 Frame Format. none, t1-sf, t1-esf, e1-unframed, e1-crc4, e1-dualframe, e1-basicframe." SYNTAX INTEGER { none(1), t1-sf(2), t1-esf(3), e1-unframed(4), e1-crc4(5), e1-dualframe(6), t1-unframed(7), e1-basicframe(8) } E1T1RcvSensitivity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for E1/T1 Receive Sensitivity high-range, low-range" SYNTAX INTEGER { high-range(1), low-range(2) } E3T3FrameFormat ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Frame Format of E3/T3." SYNTAX INTEGER { none(0), dsx3CbitParity (1), g832 (2), e3Unframed (3), dsx3M23 (4), g751 (5), dsx3Unframed (6) } TDMPathType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the path type." SYNTAX INTEGER { none (0), t1 (1), e1 (2), t3 (3), e3 (4), vc12 (5), vc3 (6), vc4 (7), vt15 (8), sts1 (9), sts3c (10) } PPSGenCondition ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for PPS Generation Condition tracked-1sat, tracked-3sat" SYNTAX INTEGER { tracked-1sat(1), tracked-3sat(2) } GPSAntennaStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for GPS Antenna Status" SYNTAX INTEGER { open(1), short(2), normal(3), unavailable(4) } PolicingControl ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Defines Policing Control options." SYNTAX INTEGER { a2n(1), n2a(2), a2nN2a(3), n2n(4) } FlowConfigType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Defines types of Flow." SYNTAX INTEGER { access(1), -- Flow on an Access Port passThru(2) -- Pass-thru Flow between the 2 Network Ports } G3AuthStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Disabled (PIN protection is disabled) OK (PIN protection is enabled and PIN code is correct) Input PIN (input PIN to unlock) Input PUK (PIN code is locked, input PUK to unlock) Locked (must contact with SIM provider)." SYNTAX INTEGER { disabled (1), ok (2), input-pin (3), input-puk (4), locked (5), none (6) } PsePowerLevel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Defines the power level for pse port. class1 (4.00 Watts) :0 class2 (7.00 Watts) :1 class0andclass 3 (15.4 Watts):2 class4 (30 Watts):3." SYNTAX INTEGER { class1 (1), class2 (2), class0andclass3 (3), class4 (4) } PSENonStandardPD ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for NonStandardPD disabled:don't support non-standard PD, enabled:support non-standard PD" SYNTAX INTEGER { enabled (1), disabled (2) } LearningAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes Action on ingress frames when the number of MAC Table entires has reached the maximum defined by tableSize" SYNTAX INTEGER { block (1), forward (2) } SfpChannelIdentifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes Channel number of WDM tunable XFP setting." SYNTAX INTEGER { not-applicable (0), -- null none(1), -- none frequency-19610 (2), -- 196.10THz 1528.7734nm frequency-19595 (3), -- 195.95THz 1529.9436nm frequency-19585 (4), -- 195.85THz 1530.7248nm frequency-19575 (5), -- 195.75THz 1531.5068nm frequency-19565 (6), -- 195.65THz 1532.2896nm frequency-19555 (7), -- 195.55THz 1533.0732nm frequency-19545 (8), -- 195.45THz 1533.8575nm frequency-19535 (9), -- 195.35THz 1534.6427nm frequency-19525 (10), -- 195.25THz 1535.4287nm frequency-19515 (11), -- 195.15THz 1536.2155nm frequency-19505 (12), -- 195.05THz 1537.0031nm frequency-19495 (13), -- 194.95THz 1537.7915nm frequency-19485 (14), -- 194.85THz 1538.5807nm frequency-19475 (15), -- 194.75THz 1539.3708nm frequency-19465 (16), -- 194.65THz 1540.1616nm frequency-19455 (17), -- 194.55THz 1540.9533nm frequency-19445 (18), -- 194.45THz 1541.7457nm frequency-19435 (19), -- 194.35THz 1542.5390nm frequency-19425 (20), -- 194.25THz 1543.3331nm frequency-19415 (21), -- 194.15THz 1544.1280nm frequency-19405 (22), -- 194.05THz 1544.9238nm frequency-19395 (23), -- 193.95THz 1545.7203nm frequency-19385 (24), -- 193.85THz 1546.5177nm frequency-19375 (25), -- 193.75THz 1547.3159nm frequency-19365 (26), -- 193.65THz 1548.1149nm frequency-19355 (27), -- 193.55THz 1548.9148nm frequency-19345 (28), -- 193.45THz 1549.7155nm frequency-19335 (29), -- 193.35THz 1550.5170nm frequency-19325 (30), -- 193.25THz 1551.3193nm frequency-19315 (31), -- 193.15THz 1552.1225nm frequency-19305 (32), -- 193.05THz 1552.9265nm frequency-19295 (33), -- 192.95THz 1553.7313nm frequency-19285 (34), -- 192.85THz 1554.5370nm frequency-19275 (35), -- 192.75THz 1555.3435nm frequency-19265 (36), -- 192.65THz 1556.1508nm frequency-19255 (37), -- 192.55THz 1556.9590nm frequency-19245 (38), -- 192.45THz 1557.7680nm frequency-19235 (39), -- 192.35THz 1558.5779nm frequency-19225 (40), -- 192.25THz 1559.3886nm frequency-19215 (41), -- 192.15THz 1560.2001nm frequency-19205 (42), -- 192.05THz 1561.0125nm frequency-19600 (43), -- 196.00THz 1529.55nm D01 frequency-19590 (44), -- 195.90THz 1530.33nm D02 frequency-19580 (45), -- 195.80THz 1531.12nm D03 frequency-19570 (46), -- 195.70THz 1531.90nm D04 frequency-19560 (47), -- 195.60THz 1532.68nm DC1 frequency-19550 (48), -- 195.50THz 1533.47nm D05 frequency-19540 (49), -- 195.40THz 1534.25nm D06 frequency-19530 (50), -- 195.30THz 1535.04nm D07 frequency-19520 (51), -- 195.20THz 1535.82nm D08 frequency-19510 (52), -- 195.10THz 1536.60nm DC2 frequency-19500 (53), -- 195.00THz 1537.40nm D09 frequency-19490 (54), -- 194.90THz 1538.19nm D10 frequency-19480 (55), -- 194.80THz 1538.98nm D11 frequency-19470 (56), -- 194.70THz 1539.77nm D12 frequency-19460 (57), -- 194.60THz 1540.55nm DC3 frequency-19450 (58), -- 194.50THz 1541.35nm D13 frequency-19440 (59), -- 194.40THz 1542.14nm D14 frequency-19430 (60), -- 194.30THz 1542.94nm D15 frequency-19420 (61), -- 194.20THz 1543.73nm D16 frequency-19410 (62), -- 194.10THz 1544.52nm DC4 frequency-19400 (63), -- 194.00THz 1545.32nm DC9 frequency-19390 (64), -- 193.90THz 1546.11nm DC5 frequency-19380 (65), -- 193.80THz 1546.92nm D17 frequency-19370 (66), -- 193.70THz 1547.72nm D18 frequency-19360 (67), -- 193.60THz 1548.51nm D19 frequency-19350 (68), -- 193.50THz 1549.32nm D20 frequency-19340 (69), -- 193.40THz 1550.11nm DC6 frequency-19330 (70), -- 193.30THz 1550.92nm D21 frequency-19320 (71), -- 193.20THz 1551.72nm D22 frequency-19310 (72), -- 193.10THz 1552.52nm D23 frequency-19300 (73), -- 193.00THz 1553.33nm D24 frequency-19290 (74), -- 192.90THz 1554.13nm DC7 frequency-19280 (75), -- 192.80THz 1554.94nm D25 frequency-19270 (76), -- 192.70THz 1555.75nm D26 frequency-19260 (77), -- 192.60THz 1556.55nm D27 frequency-19250 (78), -- 192.50THz 1557.36nm D28 frequency-19240 (79), -- 192.40THz 1558.17nm DC8 frequency-19230 (80), -- 192.30THz 1558.98nm D29 frequency-19220 (81), -- 192.20THz 1559.79nm D30 frequency-19210 (82), -- 192.10THz 1560.61nm D31 frequency-19200 (83), -- 192.00THz 1561.42nm D32 frequency-19195 (84), -- 191.95Thz 1561.83nm D33 frequency-19190 (85), -- 191.90Thz 1562.23nm D34 frequency-19185 (86), -- 191.85Thz 1562.64nm D35 frequency-19180 (87), -- 191.80Thz 1561.42nm D36 frequency-19175 (88), -- 191.75Thz 1563.05nm D37 frequency-19170 (89), -- 191.70Thz 1563.86nm D38 frequency-19165 (90), -- 191.65Thz 1564.27nm D39 frequency-19160 (91), -- 191.60Thz 1564.68nm D40 frequency-19155 (92), -- 191.55Thz 1565.09nm D41 frequency-19150 (93), -- 191.50Thz 1565.50nm D42 frequency-19145 (94), -- 191.45Thz 1565.90nm D43 frequency-19140 (95), -- 191.40Thz 1566.31nm D44 frequency-19135 (96), -- 191.35Thz 1566.72nm D45 frequency-19130 (97), -- 191.30Thz 1567.13nm D46 frequency-19125 (98), -- 191.25Thz 1567.54nm D47 notTunable (99), -- not tunable frequency-19605(100), -- 196.05Thz 1529.1634nm autoTuning (101) -- auto tuning } BandwidthProfileMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " A Network Element level Frame Rate Bandwidth Profile Mode shall be supported which will indicate if the CIR/EIR is interpreted as Information Rate (IR) or Line Rate (LR). In IR mode BWP is enforced based on number of bytes beginning with DA and ending with FCS as it was received at a port which is called the Service Frame in MEF terminology. In LR mode the BWP is enforced based on the whole frame including IFG, Preamble and SFD." SYNTAX INTEGER { lineRate (1), informationRate (2) } LearningConfigAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Learning Action: noAction - No Action flushFwdTable - Removes all dynamic entries from the Forwarding table of a Flow. clearBlock - removes the secondary state of BLCKD and transitions the flow to a state where frames are not blocked resetAgingTimer - reset the aging timer " SYNTAX INTEGER { noAction (1), flushFwdTable (2), clearBlock (3), resetAgingTimer(4) } TrafficPortDeleteEntitiesAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Learning Action: no-action - No Action delete-esa-entities - Removes all esa entities relate to this port. delete-cfm-entities - Removes all cfm entities relate to this port." SYNTAX INTEGER { no-action (1), delete-esa-entities (2), delete-cfm-entities (3) } UsbDCNMobileNetworkType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Mobile network type: none secondGeneration - 2G. thirdGeneration - 3G, fourthGeneration - 4G, notApplicable." SYNTAX INTEGER { none (1), secondGeneration (2), thirdGeneration (3), fourthGeneration (4), notApplicable(5) } TxDeiAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Transmit DEI Action." SYNTAX INTEGER { setToZero (1), markColor (2), noChange (3) } RxDeiAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Receive DEI Action." SYNTAX INTEGER { ignore (1), use (2) } DeiOuterTagType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "DEI Outer Tag Type." SYNTAX INTEGER { stag (1), ctagOrStag (2) } ConstellationType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Constellation Type of GPS Antenna" SYNTAX INTEGER { gps-only(1), glonass-only(2), gps-and-glonass(3), beidou-and-gps(4), beidou-only(5) } TODOutputFormat ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Output Format of TOD Port" SYNTAX INTEGER { nmea(1), ccsa(2) } ConstellationTypesBitMap ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates GNSS constellation types supported by a GNSS Receiver Port. The valid bits must be set in order for this attribute to contain valid information. The representation of each bit setting (0 or 1) is indicated below. Bit Field Flag Description --------- ------------------------------------ 0 1 = GPS is supported; 0 = GPS not supported 1 1 = GLONASS is supported; 0 = GLONASS is not supported 2 1 = BEIDOU is supported; 0 = BEIDOU is not supported 3 1 = GALILEO is supported; 0 = GALILEO is not supported 4 1 = SBAS is supported; 0 = SBAS is not supported" SYNTAX BITS { gps(0), glonass(1), beidou(2), galileo(3), sbas(4), qzss(5) } InstallationType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Installation Type of GPS Antenna" SYNTAX INTEGER { full-sky-view(1), limited-sky-view(2) } WIFIEncryptionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Type of WIFI encryption" SYNTAX INTEGER { notApplicable(0), wpa-psk(1), wpa2-psk(2), wpa-wpa2-psk(3) } DHCPType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "DHCP role type" SYNTAX INTEGER { client(1), server(2) } CosMappingMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "EoMpls Cos Mapping mode" SYNTAX INTEGER { ethernet (1), eompls (2), vxlan (3), gre (4), sr-mpls (5) } EthernetPortTrafficModel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Traffic Model for Ethernet Port." SYNTAX INTEGER { accessFlow(1), flowpoint(2) } SatelliteHealth ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Satellite Health of GNSS Satellite" SYNTAX INTEGER { na(1), ok(2), weak(3), dead(4), no-data-modulation(5) } DelayOption ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Defines the units of GNSS Antenna Cable Delay value" SYNTAX INTEGER { nanoseconds(2), meters(3) } AclRuleOperation ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the acl rule operation." SYNTAX INTEGER { notApplicable (0), accept (1), deny (2) } EfIdentificationType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " five-tuple - 5-field identifier seven-tuple - 7-field identifier" SYNTAX INTEGER { five-tuple(1), seven-tuple(2) } UsbOperationalMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Types of usb operational mode." SYNTAX INTEGER { cellular-modem(1), srv-access (2) } SaBitsState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Bit states for the five Sa Bits from bit4 to bit8." SYNTAX BITS { bit4(0), bit5(1), bit6(2), bit7(3), bit8(4) } SignalShape ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for Frequency Signal Shape. It can be sine or square wave signal." SYNTAX INTEGER { sine(1), square(2) } SignalFrequency ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for Signal Frequency." SYNTAX INTEGER { frequency-100kHz(1), frequency-1MHz(2), frequency-1544kHz(3), frequency-2048kHz(4), frequency-5MHz(5), frequency-10MHz(6), frequency-25MHz(7), frequency-50MHz(8) } PpsPolarity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for the Polarity of the PPS Port interfaces." SYNTAX INTEGER { positive(1), negative(2) } PpsPortImpedanceMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for the impedance mode of the PPS Port interfaces." SYNTAX INTEGER { not-available(0), pps-50Ohm(1), pps-1MOhm(2) } AclNoMatchDispositionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Types of ACL no match disposition." SYNTAX INTEGER { accept(1), deny(2) } EfIdentificationFieldType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Elephant Flow identification fields." SYNTAX BITS { srcMac(0), destMac(1), srcIp(2), destIp(3), ipProtocol(4), srcPort(5), destPort(6) } ToggleValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for functionality that can be enabled or disabled." SYNTAX INTEGER { enabled(1), disabled(2), not-available(3) } IrigTimeCode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for ." SYNTAX INTEGER { irig-a002(1), irig-a007(2), irig-a132(3), irig-a137(4), irig-b002(5), irig-b004(6), irig-b006(7), irig-b007(8), irig-b122(9), irig-b124(10), irig-b126(11), irig-b127(12), irig-g002(13), irig-g007(14), irig-g142(15), irig-g146(16), pps(17), ppm(18), pph(19), have-quick(20) } IrigControlField ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for IRIG Control Field." SYNTAX INTEGER { ieee1344(1), ieee37-118(2) } IrigRelayOperation ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for IRIG Relay Operation. Relay state can be configured to toggle once per hour, once per minute, to stay active (locked), or to stay inactive (alarm)." SYNTAX INTEGER { every-hour(1), every-minute(2), locked(3), alarm(4) } IrigOutputType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for IRIG Output Type." SYNTAX INTEGER { digital(1), analog(2), optical(3) } IrigDigitalSignalVoltage ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for ." SYNTAX INTEGER { digital-5v(1), digital-10v(2) } IrigGroupExtensionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for IRIG Group Extension Type." SYNTAX INTEGER { patch-panel(1), extension-cable(2), none(3) } CcPortDutyCycle ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "CC port duty cycle" SYNTAX INTEGER { cycle-63-37(1), cycle-50-50(2) } CcActivePortState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Port states for CC group entities." SYNTAX BITS { port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7), port8(8), port8(9) } DynamicModelType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Dynamic Model Type of GNSS Receiver" SYNTAX INTEGER { portable(0), stationary(1), pedestrian(2), automotive(3), sea(4), airborne1g(5), airborne2g(6), airborne4g(7) } -- -- Enumeration Type : PoEStatus -- PoEStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Power over ethernet status" SYNTAX INTEGER { searching(1), detection(2), classification(3), powerout(4), idle(5), failed(6), na(7) } PlugType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Plug Type." SYNTAX INTEGER { generic(1), gMetro(2) } PlugMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Plug Mode." SYNTAX INTEGER { tailEnd(1), headEnd(2) } RelativeChannelIdentifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Relative Channel Identifier." SYNTAX INTEGER { channel1(1), channel2(2), channel3(3), channel4(4), channel5(5), channel6(6), channel7(7), channel8(8), channel9(9) } ChannelType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Channel Type." SYNTAX INTEGER { ituCband(1), relativeChannelNumber(2), frequency(3) } OutOfBandChannelStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Out Of Band Channel Status." SYNTAX INTEGER { notApplicable(1), disabled(2), idle(3), communicationInProgress(4), communicationError(5), autoTunningInProgress(6) } GMetroAutoTuningMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "G.Metro Auto Tuning Mode." SYNTAX INTEGER { pairedTuning(1), blindTuning(2), autonomousTuning(3) } FrequencyIdentifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Frequency Identifier." SYNTAX INTEGER { frequency19120(1), frequency19130(2), frequency19140(3), frequency19150(4), frequency19160(5), frequency19170(6), frequency19180(7), frequency19190(8), frequency19200(9), frequency19210(10), frequency19220(11), frequency19230(12), frequency19240(13), frequency19250(14), frequency19260(15), frequency19270(16), frequency19280(17), frequency19290(18), frequency19300(19), frequency19310(20), frequency19320(21), frequency19330(22), frequency19340(23), frequency19350(24), frequency19360(25), frequency19370(26), frequency19380(27), frequency19390(28), frequency19400(29), frequency19410(30), frequency19420(31), frequency19430(32), frequency19440(33), frequency19450(34), frequency19460(35), frequency19470(36), frequency19480(37), frequency19490(38), frequency19500(39), frequency19510(40), frequency19520(41), frequency19530(42), frequency19540(43), frequency19550(44), frequency19560(45), frequency19570(46), frequency19580(47), frequency19590(48), frequency19600(49) } ITUCBandChannelIdentifier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "ITU C-band Channel Identifier." SYNTAX INTEGER { c12(1), c13(2), c14(3), c15(4), c16(5), c17(6), c18(7), c19(8), c20(9), c21(10), c22(11), c23(12), c24(13), c25(14), c26(15), c27(16), c28(17), c29(18), c30(19), c31(20), c32(21), c33(22), c34(23), c35(24), c36(25), c37(26), c38(27), c39(28), c40(29), c41(30), c42(31), c43(32), c44(33), c45(34), c46(35), c47(36), c48(37), c49(38), c50(39), c51(40), c52(41), c53(42), c54(43), c55(44), c56(45), c57(46), c58(47), c59(48), c60(49) } -- -- Ethernet Access Port -- cmEthernetAccPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetAccPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Access Port Facilities for configuration purposes." ::= { cmFacilityObjects 1 } cmEthernetAccPortEntry OBJECT-TYPE SYNTAX CmEthernetAccPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetAccPortTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetAccPortIndex } ::= { cmEthernetAccPortTable 1 } CmEthernetAccPortEntry ::= SEQUENCE { -- Port Indices cmEthernetAccPortIndex Integer32, cmEthernetAccPortIfIndex InterfaceIndex, cmEthernetAccPortEntityIndex PhysicalIndex, -- State Management params cmEthernetAccPortAdminState AdminState, cmEthernetAccPortOperationalState OperationalState, cmEthernetAccPortSecondaryState SecondaryState, -- Generic Port params cmEthernetAccPortMTU Integer32, -- Generic Ethernet Port params cmEthernetAccPortMediaType EthernetMediaType, cmEthernetAccPortConfigSpeed EthernetPortSpeed, cmEthernetAccPortNegotiatedSpeed EthernetPortSpeed, cmEthernetAccPortMDIXType CmEthernetMDIXType, cmEthernetAccPortJumboFramesEnabled TruthValue, cmEthernetAccPortSfpVendorName DisplayString, cmEthernetAccPortSfpPartNumber DisplayString, cmEthernetAccPortSfpSerialNumber DisplayString, cmEthernetAccPortSfpDateOfManufacture DateAndTime, cmEthernetAccPortSfpConnectorValue SfpConnectorValue, -- EtherJack Diagnosis params cmEthernetAccPortInitiateDiag CmEthernetDiagAction, cmEthernetAccPortDiagnosePair1Cond CmDiagCableCondType, cmEthernetAccPortDiagnosePair2Cond CmDiagCableCondType, cmEthernetAccPortDiagnosePair3Cond CmDiagCableCondType, cmEthernetAccPortDiagnosePair4Cond CmDiagCableCondType, cmEthernetAccPortDiagnoseAutoNegCond CmDiagAutoNegCondType, cmEthernetAccPortDiagnoseLpbkCond CmDiagLpbkCondType, cmEthernetAccPortDiagnoseEfmLpbkCond CmDiagEfmOamLpbkCondType, cmEthernetAccPortDiagnoseResult DisplayString, cmEthernetAccPortDiagnoseTestStatus CmDiagTestStatus, cmEthernetAccPortDiagnoseTestTime DateAndTime, -- Ethernet Loopback params cmEthernetAccPortLoopbackConfig CmLoopbackType, cmEthernetAccPortLoopbackStatus CmLoopbackType, cmEthernetAccPortLoopbackTime Integer32, cmEthernetAccPortLoopbackSwapSADA CmSwapSADAType, cmEthernetAccPortOuterVlanLoopbackMask INTEGER, cmEthernetAccPortOuterVlanLoopback1 DisplayString, cmEthernetAccPortOuterVlanLoopback2 DisplayString, cmEthernetAccPortOuterVlanLoopback3 DisplayString, cmEthernetAccPortInnerVlanLoopbackMask INTEGER, cmEthernetAccPortInnerVlanLoopback1 DisplayString, cmEthernetAccPortInnerVlanLoopback2 DisplayString, cmEthernetAccPortInnerVlanLoopback3 DisplayString, -- Link Loss Forwarding params cmEthernetAccPortLinkLossFwdEnabled TruthValue, cmEthernetAccPortLinkLossFwdSignalType CmLinkLossFwdSignalType, cmEthernetAccPortLinkLossFwdTriggerTypes CmLinkLossFwdTriggerTypes, cmEthernetAccPortLinkLossFwdDelay Integer32, cmEthernetAccPortLinkLossFwdActive TruthValue, cmEthernetAccPortLinkLossFwdPartnerEnabled TruthValue, cmEthernetAccPortLinkLossFwdLocalLinkId Integer32, cmEthernetAccPortLinkLossFwdRemoteLinkIds CmRemoteLinkIds, -- OAM params cmEthernetAccPortOamId Integer32, cmEthernetAccPortOamAdminDisposition CmControlProtocolDispType, cmEthernetAccPortOamDiscoveryState CmOamDiscoveryState, cmEthernetAccPortOamLocalVarRtrvsEnabled TruthValue, cmEthernetAccPortOamLocalLinkEventsEnabled TruthValue, cmEthernetAccPortOamLocalOamLoopbacksSupported TruthValue, cmEthernetAccPortOamLocalUnidirSupportEnabled TruthValue, cmEthernetAccPortOamLocalMaxPDUSize Integer32, cmEthernetAccPortOamLocalMode CmOamMode, cmEthernetAccPortOamRemoteMacAddress MacAddress, cmEthernetAccPortOamRemoteVarRtrvsEnabled TruthValue, cmEthernetAccPortOamRemoteLinkEventsEnabled TruthValue, cmEthernetAccPortOamRemoteOamLoopbacksSupported TruthValue, cmEthernetAccPortOamRemoteUnidirSupportEnabled TruthValue, cmEthernetAccPortOamRemoteMaxPDUSize Integer32, cmEthernetAccPortOamRemoteMode CmOamMode, -- Ethernet Port Service params cmEthernetAccPortMode CmEthernetSvcPortMode, cmEthernetAccPortSvcType CmEthernetSvcType, -- Ethernet Port Traffic params cmEthernetAccPortRxPauseDisposition CmControlProtocolDispType, cmEthernetAccPortTxPauseEnabled TruthValue, cmEthernetAccPortAfpType CmAfpType, --New objects available with FSP150CC GE206 (Release 4.1CC) -- Generic Ethernet Port params cmEthernetAccPortMDIXStatus CmEthernetMDIXType, cmEthernetAccPortSfpReach Integer32, cmEthernetAccPortSfpLaserWaveLength Integer32, cmEthernetAccPortSfpMediaType SfpMediaType, -- EFM OAM cmEthernetAccPortOamEnabled TruthValue, cmEthernetAccPortOamAdminState CmOamAdminState, -- Ethernet Port Traffic params cmEthernetAccPortShapingEnabled TruthValue, cmEthernetAccPortShapedSpeedLo Unsigned32, cmEthernetAccPortShapedSpeedHi Unsigned32, cmEthernetAccPortQinQEtherType Unsigned32, cmEthernetAccPortRxPauseEnabled TruthValue, -- EtherJack Diagnosis params cmEthernetAccPortAutoDiagEnabled TruthValue, -- LLF param cmEthernetAccPortLinkLossFwdTxActionType CmLinkLossFwdTxActionType, cmEthernetAccPortLinkLossFwdRxRLDLinkIds CmRemoteLinkIds, --Ethernet Port Services params cmEthernetAccPortN2AVlanTrunkingEnabled TruthValue, cmEthernetAccPortA2NPushPVIDEnabled TruthValue, cmEthernetAccPortN2APopPVIDEnabled TruthValue, cmEthernetAccPortPortVlanId VlanId, cmEthernetAccPortPortVlanPriority VlanPriority, cmEthernetAccPortPrioMapMode PriorityMapMode, --Synchronous Port params cmEthernetAccPortSyncEEnabled TruthValue, cmEthernetAccPortQLModeEnabled TruthValue, cmEthernetAccPortExpectedQL SSMQualityLevel, cmEthernetAccPortAssumedQL SSMQualityLevel, cmEthernetAccPortReceivedQL SSMQualityLevel, cmEthernetAccPortTransmitQL SSMQualityLevel, --PCP DEI params cmEthernetAccPortDeiEnable TruthValue, cmEthernetAccPortPcpDEEncType PcpDEEncType, cmEthernetAccPortPcpDEPairsAction PcpDEPairsAction, cmEthernetAccPortSSMRemoteMacAddress MacAddress, --XG params cmEthernetAccPortXgePhyType XgePhyType, --Mac Loopback Params cmEthernetAccPortLoopbackSourceMacControlEnabled TruthValue, cmEthernetAccPortLoopbackDestMacControlEnabled TruthValue, cmEthernetAccPortLoopbackSourceMacAddress MacAddress, cmEthernetAccPortLoopbackDestMacAddress MacAddress, cmEthernetAccPortLoopbackBlockingEnabled TruthValue, -- Ethernet Port Traffic params cmEthernetAccPortRxDeiAction RxDeiAction, cmEthernetAccPortTxDeiAction TxDeiAction, cmEthernetAccPortRxDeiOuterTagType DeiOuterTagType, cmEthernetAccPortTxDeiOuterTagType DeiOuterTagType, --XFP params cmEthernetAccPortLaserWDMChannel SfpChannelIdentifier, cmEthernetAccPortLaserIsTunable TruthValue, cmEthernetAccPortLaserFrequency Unsigned32, -- Generic Ethernet Port params - added in R6.5 cmEthernetAccPortMediaTypeAutoSelected EthernetMediaType, -- Ethernet Port Traffic params - added in R6.5 cmEthernetAccPortLowLatencyQueuingEnabled TruthValue, cmEthernetAccPortA2nSwapPriorityVIDEnabled TruthValue, cmEthernetAccPortN2aSwapPriorityVIDEnabled TruthValue, cmEthernetAccPortSwapPriorityVID VlanId, cmEthernetAccPortDiagnosticMacAddress MacAddress, cmEthernetAccPortIngressCOSPriority VlanTagType, cmEthernetAccPortDefaultCOS Integer32, cmEthernetAccPortTrafficModel EthernetPortTrafficModel, cmEthernetAccPortIndependentShaperBW TruthValue, cmEthernetAccPortJdsuLoopbackSrcIp IpAddress, cmEthernetAccPortWfqSegmentationCOS Integer32, cmEthernetAccPortWfqGroupCOS Integer32, cmEthernetAccPortWfqGroupEirLo Unsigned32, cmEthernetAccPortWfqGroupEirHi Unsigned32, cmEthernetAccPortSilentStartControl TruthValue, cmEthernetAccPortSfpLinkLength Integer32, -- Ethernet Port Traffic params cmEthernetAccPortOuterTagTpidOverride TruthValue, cmEthernetAccPortOuterTagTpid Unsigned32, -- Ethernet Port SFP params cmEthernetAccPortSfpName DisplayString, cmEthernetAccPortSfpHardwareRevision DisplayString, -- Persistent Loopback Control cmEthernetAccPortPersistentLoopbackControl TruthValue, -- Ethernet Port Loopback Test Reflector params cmEthernetAccPortLoopbackTestReflectorIPv4AddressControl TruthValue, cmEthernetAccPortLoopbackTestReflectorIPv4Address IpAddress, cmEthernetAccPortLoopbackTestReflectorIPv6AddressControl TruthValue, cmEthernetAccPortLoopbackTestReflectorIPv6Address Ipv6Address, cmEthernetAccPortPowerdDeviceDetection ToggleValue, cmEthernetAccPortPoEStatus PoEStatus, -- Ethernet Port SFP params cmEthernetAccPortSfpIdentifierValue SfpIdentifierValue } -- Port Indices cmEthernetAccPortIndex OBJECT-TYPE SYNTAX Integer32 (0|1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this Ethernet Access Port within a card. Note that each Ethernet Access Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, cmEthernetAccPortIndex. From release 5.6CC zero value becomes valid. The zero value is used in Network Element level objects which contain cmEthernetAccPortIndex in the index which is not-applicable for these objects e.g. Pass-thru Flows, Shapers or Policers." ::= { cmEthernetAccPortEntry 1 } cmEthernetAccPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the same value as ifIndex for Ethernet Access Port. An integer index value used to uniquely identify this Ethernet Access Port." ::= { cmEthernetAccPortEntry 2 } cmEthernetAccPortEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Entity Index from ENTITY-MIB for this port." ::= { cmEthernetAccPortEntry 3 } -- State Management params cmEthernetAccPortAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the Ethernet Access Port." ::= { cmEthernetAccPortEntry 4 } cmEthernetAccPortOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the Ethernet Access Port." ::= { cmEthernetAccPortEntry 5 } cmEthernetAccPortSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Ethernet Access Port." ::= { cmEthernetAccPortEntry 6 } -- Generic Port params cmEthernetAccPortMTU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the MTU on the Ethernet Access Port. The object is made read-write for FSP150CC devices." ::= { cmEthernetAccPortEntry 7 } cmEthernetAccPortMediaType OBJECT-TYPE SYNTAX EthernetMediaType MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the type of Ethernet Media on the Ethernet Access Port." ::= { cmEthernetAccPortEntry 8 } cmEthernetAccPortConfigSpeed OBJECT-TYPE SYNTAX EthernetPortSpeed MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to configure the speed of the Ethernet Access Port." ::= { cmEthernetAccPortEntry 9 } cmEthernetAccPortNegotiatedSpeed OBJECT-TYPE SYNTAX EthernetPortSpeed MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the negotiated speed of the Ethernet Access Port." ::= { cmEthernetAccPortEntry 10 } cmEthernetAccPortMDIXType OBJECT-TYPE SYNTAX CmEthernetMDIXType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows management of MDIX property on Ethernet Access Port." ::= { cmEthernetAccPortEntry 11 } cmEthernetAccPortJumboFramesEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows enabling/disabling jumbo frames support on the Ethernet Access Port. This object is only applicable for Ethernet Access Port on R3.1CM NTU Card." ::= { cmEthernetAccPortEntry 12 } cmEthernetAccPortSfpVendorName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the vendor name of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp." ::= { cmEthernetAccPortEntry 13 } cmEthernetAccPortSfpPartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the part number of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp." ::= { cmEthernetAccPortEntry 14 } cmEthernetAccPortSfpSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the serial number of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp." ::= { cmEthernetAccPortEntry 15 } cmEthernetAccPortSfpDateOfManufacture OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the date of manufacture of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp." ::= { cmEthernetAccPortEntry 16 } cmEthernetAccPortSfpConnectorValue OBJECT-TYPE SYNTAX SfpConnectorValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP connector value. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp." ::= { cmEthernetAccPortEntry 17 } -- EtherJack Diagnosis params cmEthernetAccPortInitiateDiag OBJECT-TYPE SYNTAX CmEthernetDiagAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to initiate Etherjack diagnosis on the Ethernet Access Port." ::= { cmEthernetAccPortEntry 18 } cmEthernetAccPortDiagnosePair1Cond OBJECT-TYPE SYNTAX CmDiagCableCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides diagnosis results for the cable Pair 1 on Ethernet Access Port." ::= { cmEthernetAccPortEntry 19 } cmEthernetAccPortDiagnosePair2Cond OBJECT-TYPE SYNTAX CmDiagCableCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides diagnosis results for the cable Pair 2 on Ethernet Access Port." ::= { cmEthernetAccPortEntry 20 } cmEthernetAccPortDiagnosePair3Cond OBJECT-TYPE SYNTAX CmDiagCableCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides diagnosis results for the cable Pair 3 on Ethernet Access Port." ::= { cmEthernetAccPortEntry 21 } cmEthernetAccPortDiagnosePair4Cond OBJECT-TYPE SYNTAX CmDiagCableCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides diagnosis results for the cable Pair 4 on Ethernet Access Port." ::= { cmEthernetAccPortEntry 22 } cmEthernetAccPortDiagnoseAutoNegCond OBJECT-TYPE SYNTAX CmDiagAutoNegCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides auto negotiation results of the diagnosis test on Ethernet Access Port." ::= { cmEthernetAccPortEntry 23 } cmEthernetAccPortDiagnoseLpbkCond OBJECT-TYPE SYNTAX CmDiagLpbkCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides port loopback results of the diagnosis test on Ethernet Access Port." ::= { cmEthernetAccPortEntry 24 } cmEthernetAccPortDiagnoseEfmLpbkCond OBJECT-TYPE SYNTAX CmDiagEfmOamLpbkCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides remote EFM loopback results of the diagnosis test on Ethernet Access Port." ::= { cmEthernetAccPortEntry 25 } cmEthernetAccPortDiagnoseResult OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides results of the diagnosis test in string form on Ethernet Access Port." ::= { cmEthernetAccPortEntry 26 } cmEthernetAccPortDiagnoseTestStatus OBJECT-TYPE SYNTAX CmDiagTestStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the current status of the diagnosis test on Ethernet Access Port." ::= { cmEthernetAccPortEntry 27 } cmEthernetAccPortDiagnoseTestTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the time when diagnosis test was last executed." ::= { cmEthernetAccPortEntry 28 } -- Ethernet Loopback params cmEthernetAccPortLoopbackConfig OBJECT-TYPE SYNTAX CmLoopbackType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to initiate loopbacks on on the Ethernet Access Port." ::= { cmEthernetAccPortEntry 29 } cmEthernetAccPortLoopbackStatus OBJECT-TYPE SYNTAX CmLoopbackType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides status of the current loopback on the Ethernet Access Port." ::= { cmEthernetAccPortEntry 30 } cmEthernetAccPortLoopbackTime OBJECT-TYPE SYNTAX Integer32 (2..300) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify time for timed-loopbacks on on the Ethernet Access Port." ::= { cmEthernetAccPortEntry 31 } cmEthernetAccPortLoopbackSwapSADA OBJECT-TYPE SYNTAX CmSwapSADAType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify whether or not the loopbacked frame will have the Source Address and Destination Address swapped." ::= { cmEthernetAccPortEntry 32 } cmEthernetAccPortOuterVlanLoopbackMask OBJECT-TYPE SYNTAX INTEGER (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the outer VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Outer VLAN 1 Loopback Enabled 2 Outer VLAN 2 Loopback Enabled 4 Outer VLAN 3 Loopback Enabled Value of 0 means that no VLANs are enabled." ::= { cmEthernetAccPortEntry 33 } cmEthernetAccPortOuterVlanLoopback1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the outer VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetAccPortEntry 34 } cmEthernetAccPortOuterVlanLoopback2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the outer VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetAccPortEntry 35 } cmEthernetAccPortOuterVlanLoopback3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the outer VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetAccPortEntry 36 } cmEthernetAccPortInnerVlanLoopbackMask OBJECT-TYPE SYNTAX INTEGER (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the inner VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Inner VLAN 1 Loopback Enabled 2 Inner VLAN 2 Loopback Enabled 4 Inner VLAN 3 Loopback Enabled Value of 0 means that no VLANs are enabled." ::= { cmEthernetAccPortEntry 37 } cmEthernetAccPortInnerVlanLoopback1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the inner VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetAccPortEntry 38 } cmEthernetAccPortInnerVlanLoopback2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the inner VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetAccPortEntry 39 } cmEthernetAccPortInnerVlanLoopback3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the inner VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetAccPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetAccPortEntry 40 } -- Link Loss Forwarding params cmEthernetAccPortLinkLossFwdEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows enabling/disabling link loss forwarding on the Ethernet Access Port." ::= { cmEthernetAccPortEntry 41 } cmEthernetAccPortLinkLossFwdSignalType OBJECT-TYPE SYNTAX CmLinkLossFwdSignalType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object allows definition of the link loss forwarding signalling type. This is applicable only if cmEthernetAccPortLinkLossFwdEnabled is enabled. This object is applicable only for FSP150CM Release 3.1. This object is deprecated henceforth. Link Loss signalling will be supported using the object cmEthernetAccPortLinkLossFwdTxActionType." ::= { cmEthernetAccPortEntry 42 } cmEthernetAccPortLinkLossFwdTriggerTypes OBJECT-TYPE SYNTAX CmLinkLossFwdTriggerTypes MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows definition of the link loss forwarding trigger types. This is applicable only if cmEthernetAccPortLinkLossFwdEnabled is enabled." ::= { cmEthernetAccPortEntry 43 } cmEthernetAccPortLinkLossFwdDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the delay between detection of link loss and signalling of link loss forwarding. Time specified is in seconds." ::= { cmEthernetAccPortEntry 44 } cmEthernetAccPortLinkLossFwdActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the link loss forwarding status indicating if link loss forwarding is currently being signaled via the port." ::= { cmEthernetAccPortEntry 45 } cmEthernetAccPortLinkLossFwdPartnerEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the indication of a link partners ability to support link loss forwarding via EFM, i.e. from received organization specific OAMPDUs." ::= { cmEthernetAccPortEntry 46 } cmEthernetAccPortLinkLossFwdLocalLinkId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows configuration of the Local Link Id on Ethernet access port." ::= { cmEthernetAccPortEntry 47 } cmEthernetAccPortLinkLossFwdRemoteLinkIds OBJECT-TYPE SYNTAX CmRemoteLinkIds MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows enabling/disabling Remote Link Ids on Ethernet access port. By setting the appropriate bit positions, the Ethernet access port is able to distinguish the remote side client ports from the Remote Link Down PDUs coming from remote end." ::= { cmEthernetAccPortEntry 48 } -- OAM params cmEthernetAccPortOamId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OAM Id. This is unique EFM OAM sublayer port id." ::= { cmEthernetAccPortEntry 49 } cmEthernetAccPortOamAdminDisposition OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Ethernet Access Port's EFM OAM Disposition. This object is applicable only for FSP150CM Release 3.1. This object is deprecated henceforth. With FSP150CC Release 4.1, this property is managed using the Control Protocol Disposition tables." ::= { cmEthernetAccPortEntry 50 } cmEthernetAccPortOamDiscoveryState OBJECT-TYPE SYNTAX CmOamDiscoveryState MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Access Port's OAM discovery state." ::= { cmEthernetAccPortEntry 51 } cmEthernetAccPortOamLocalVarRtrvsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows specification of whether the Ethernet Access Port supports sending variable response OAMPDUs." ::= { cmEthernetAccPortEntry 52 } cmEthernetAccPortOamLocalLinkEventsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows specification of whether the Ethernet Access Port supports interpreting Link Events." ::= { cmEthernetAccPortEntry 53 } cmEthernetAccPortOamLocalOamLoopbacksSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of whether the Ethernet Access Port is capable of OAM remote loopback mode." ::= { cmEthernetAccPortEntry 54 } cmEthernetAccPortOamLocalUnidirSupportEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows specification of whether the Ethernet Access Port is capable of sending OAMPDUs when the receive path is non-operational." ::= { cmEthernetAccPortEntry 55 } cmEthernetAccPortOamLocalMaxPDUSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the largest OAMPDU, in octets, supported by the Ethernet Access Port. This value is compared to the remote Maximum PDU Size and the smaller of the two is used." ::= { cmEthernetAccPortEntry 56 } cmEthernetAccPortOamLocalMode OBJECT-TYPE SYNTAX CmOamMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to configure the OAM sublayer entity in either Active or Passive mode." ::= { cmEthernetAccPortEntry 57 } cmEthernetAccPortOamRemoteMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of the Remote Mac Address." ::= { cmEthernetAccPortEntry 58 } cmEthernetAccPortOamRemoteVarRtrvsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of whether the remote OAM entity supports sending variable response OAMPDUs." ::= { cmEthernetAccPortEntry 59 } cmEthernetAccPortOamRemoteLinkEventsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of whether the remote OAM entity supports interpreting Link Events." ::= { cmEthernetAccPortEntry 60 } cmEthernetAccPortOamRemoteOamLoopbacksSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of whether the remote OAM entity supports OAM remote loopback mode." ::= { cmEthernetAccPortEntry 61 } cmEthernetAccPortOamRemoteUnidirSupportEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of whether the remote OAM entity is capable of sending OAMPDUs when the receive path is non-operational." ::= { cmEthernetAccPortEntry 62 } cmEthernetAccPortOamRemoteMaxPDUSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of the remote OAM entity maximum OAMPDU size." ::= { cmEthernetAccPortEntry 63 } cmEthernetAccPortOamRemoteMode OBJECT-TYPE SYNTAX CmOamMode MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows to retrieve whether the remote OAM sublayer entity is either in Active or Passive mode." ::= { cmEthernetAccPortEntry 64 } -- Ethernet Port Service params cmEthernetAccPortMode OBJECT-TYPE SYNTAX CmEthernetSvcPortMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of whether the Ethernet Access Port is in a connection-oriented (offering VLAN based services) mode or connection-less (offering MAC based services) mode." ::= { cmEthernetAccPortEntry 65 } cmEthernetAccPortSvcType OBJECT-TYPE SYNTAX CmEthernetSvcType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of whether the Ethernet Access Port provides transparent port based services, or multi-flow VLAN based services." ::= { cmEthernetAccPortEntry 66 } -- Ethernet Port Traffic params cmEthernetAccPortRxPauseDisposition OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object allows management of RX pause frames on Ethernet Access port. This object is applicable only for FSP150CM Release 3.1. This object is deprecated henceforth. With FSP150CC Release 4.1, this property is managed using the Control Protocol Disposition tables." ::= { cmEthernetAccPortEntry 67 } cmEthernetAccPortTxPauseEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows enabling/disabling transmit pause frames on Ethernet Access port." ::= { cmEthernetAccPortEntry 68 } cmEthernetAccPortAfpType OBJECT-TYPE SYNTAX CmAfpType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Acceptable Frame Policy on Ethernet Access port. Users can specify whether the port supports only tagged frames, only untagged frames or both tagged and untagged frames." ::= { cmEthernetAccPortEntry 69 } -- Generic Ethernet Port params cmEthernetAccPortMDIXStatus OBJECT-TYPE SYNTAX CmEthernetMDIXType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the current MDIX status of the Ethernet Access port." ::= { cmEthernetAccPortEntry 70 } cmEthernetAccPortSfpReach OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP Reach in meters. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp." ::= { cmEthernetAccPortEntry 71 } cmEthernetAccPortSfpLaserWaveLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP Laser Wave Length in nano meters. This is applicable only when cmEthernetAccPortMediaType is fiber." ::= { cmEthernetAccPortEntry 72 } cmEthernetAccPortSfpMediaType OBJECT-TYPE SYNTAX SfpMediaType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP Media Type. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp." ::= { cmEthernetAccPortEntry 73 } cmEthernetAccPortOamEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the EFM OAM on Ethernet Access Port." ::= { cmEthernetAccPortEntry 74 } cmEthernetAccPortOamAdminState OBJECT-TYPE SYNTAX CmOamAdminState MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the EFM OAM Admin State." ::= { cmEthernetAccPortEntry 75 } -- Ethernet Port Traffic params cmEthernetAccPortShapingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the Access Port Shaping. When enabled, values in cmEthernetAccPortShapedSpeedLo and cmEthernetAccPortShapedSpeedHi are applicable." ::= { cmEthernetAccPortEntry 76 } cmEthernetAccPortShapedSpeedLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the lower 32 bits of the Access Port Shaped speed. This value is applicable when cmEthernetAccPortShapingEnabled is enabled." ::= { cmEthernetAccPortEntry 77 } cmEthernetAccPortShapedSpeedHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the higher 32 bits of the Access Port Shaped speed. This value is applicable when cmEthernetAccPortShapingEnabled is enabled." ::= { cmEthernetAccPortEntry 78 } cmEthernetAccPortQinQEtherType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Q-in-Q Ether Type on the Access Port. Setting this value to 0 will disable the Q-in-Q override on the Access Port." ::= { cmEthernetAccPortEntry 79 } cmEthernetAccPortRxPauseEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to enable/disable the RX PAUSE on the Access Port. This object is not applicable for FSP150CM NTU Card. On NTU Card cmEthernetAccPortRxPauseDisposition object should be used to provision RxPause disposition." ::= { cmEthernetAccPortEntry 80 } -- EtherJack Diagnosis params cmEthernetAccPortAutoDiagEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to enable or disable the automatic Cable Diagnostic tests when the cable is removed from the port." ::= { cmEthernetAccPortEntry 81 } -- Link Loss Forwarding params cmEthernetAccPortLinkLossFwdTxActionType OBJECT-TYPE SYNTAX CmLinkLossFwdTxActionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Access Port's behavior when link loss forwarding trigger events occur on the Network Port. This provides ability to configure per access port LLF behavior." ::= { cmEthernetAccPortEntry 82 } cmEthernetAccPortLinkLossFwdRxRLDLinkIds OBJECT-TYPE SYNTAX CmRemoteLinkIds MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the received Remote Link IDs in EFM RLD messages on the Access Port." ::= { cmEthernetAccPortEntry 83 } --Ethernet Port Services params cmEthernetAccPortN2AVlanTrunkingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to enable or disable the VLAN trunking on Ethernet Access port. Disabling VLAN trunking removes all VLAN tags before transmitting traffic out of the access port. This object is only applicable for connection-oriented, evpl service type." ::= { cmEthernetAccPortEntry 84 } cmEthernetAccPortA2NPushPVIDEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify whether cmEthernetAccPortPortVlanId value will be PUSHed on untagged frames or not in the Access to Network direction. This object is only applicable for connection-oriented, evpl service type." ::= { cmEthernetAccPortEntry 85 } cmEthernetAccPortN2APopPVIDEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify whether cmEthernetAccPortPortVlanId value will be POPed in the Network to Access direction. This object is only applicable for connection-oriented, evpl service type." ::= { cmEthernetAccPortEntry 86 } cmEthernetAccPortPortVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Ethernet Access Port VLAN Id to PUSH on untagged frames in the Access to Network direction. This object is only applicable for connection-oriented, evpl service type, when cmEthernetAccPortA2NPushPVIDEnabled is set to true." ::= { cmEthernetAccPortEntry 87 } cmEthernetAccPortPortVlanPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Ethernet Access Port VLAN Priority for the PUSHed VLAN tag (specified by cmEthernetAccPortPortVlanId) on untagged frames in the Access to Network direction. This object is only applicable for connection-oriented, evpl service type, when cmEthernetAccPortA2NPushPVIDEnabled is set to true." ::= { cmEthernetAccPortEntry 88 } cmEthernetAccPortPrioMapMode OBJECT-TYPE SYNTAX PriorityMapMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Ethernet Access Port Priority Mapping Mode used for classification of frames. This object is only applicable for connection-oriented, evpl service type." ::= { cmEthernetAccPortEntry 89 } --Synchronous Port params cmEthernetAccPortSyncEEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify whether the Ethernet Access Port can be enabled/disabled for Synchronous Ethernet. This object is only applicable for Synchronous Ethernet capable ports. When enabled, on receive side -port can extract the frequency of its input signal and pass the recovered clock to the system clock -port processes the ESMC(Ethernet Synchronization Messaging Channel) and extracts the QL (when also QL enabled) -port is eligible to be selected as a system clock reference When enabled, on transmit side -port's transmit clock is locked to the system clock -port generates an ESMC to generate a QL (when also QL enabled) When disabled, on receive side, -port does not pass the recovered clock to the system clock -port does not process the ESMC (if present) -port is not eligible to be selected as a system clock reference When disabled, on transmit side -port's output frequency may be synchronized to the system clock -port does not generate an ESMC." ::= { cmEthernetAccPortEntry 90 } cmEthernetAccPortQLModeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify whether the Ethernet Access Port can be enabled/disabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetAccPortQLModeEnabled is set to true. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs." ::= { cmEthernetAccPortEntry 91 } cmEthernetAccPortExpectedQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the expected QL when the Ethernet Access Port is enabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetAccPortQLModeEnabled is set to true. This object allows the user to set a minimum expected received Quality Level on the port. The valid values depend upon the SYNC entity's Network Clock Type. A value of None represents that a minimum Quality Level is not expected. The default value shall be None." ::= { cmEthernetAccPortEntry 92 } cmEthernetAccPortAssumedQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the assumed QL on the Ethernet Access Port. This object is only applicable for Synchronous Ethernet capable ports. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port's QL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference." ::= { cmEthernetAccPortEntry 93 } cmEthernetAccPortReceivedQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Received QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable.This object is only applicable for Synchronous Ethernet capable ports." ::= { cmEthernetAccPortEntry 94 } cmEthernetAccPortTransmitQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Transmitted QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable. This object is only applicable for Synchronous Ethernet capable ports." ::= { cmEthernetAccPortEntry 95 } cmEthernetAccPortDeiEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This is a port level control to reset the DEI (Drop Eligibility Indicator) bit in the S-Tag, if the downstream equipment supports S-Tag TPID (EtherType) but cannot handle DEI bit set. In the receive direction, it uses the S-TAG DEI when enabled, else ignores it. The following comment is NOT relevant to OSA8.1.1, since this object is still supported by OSA8.1.1. The object has been deprecated. The respective configuration should be managed by following objects: cmEthernetAccPortRxDeiAction, cmEthernetAccPortTxDeiAction, cmEthernetAccPortRxDeiOuterTagType, cmEthernetAccPortTxDeiOuterTagType." ::= { cmEthernetAccPortEntry 96 } cmEthernetAccPortPcpDEEncType OBJECT-TYPE SYNTAX PcpDEEncType MAX-ACCESS read-write STATUS current DESCRIPTION "This is a port level control that specifies the mode of drop eligibility encoding in PCP bits of the VLAN tag." ::= { cmEthernetAccPortEntry 97 } cmEthernetAccPortPcpDEPairsAction OBJECT-TYPE SYNTAX PcpDEPairsAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetAccPortPcpDEEncType is of type 7p1d, 6p2d, 5p3d, the cmAccPortPcpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility." ::= { cmEthernetAccPortEntry 98 } cmEthernetAccPortSSMRemoteMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of the Remote Mac Address, when the port is peering using SSM." ::= { cmEthernetAccPortEntry 99 } cmEthernetAccPortXgePhyType OBJECT-TYPE SYNTAX XgePhyType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the PHY type of 10G Ethernet Port. 10G ports can operate in LAN-PHY or WAN-PHY mode. The default mode is LAN-PHY and port rate in this mode is 10Gbps. In WAN-PHY mode the port rate is 9.29Gbps. This attribute is only applicable for ports configured to work at speed-10G-full. For other speeds the value of this object must be 'not-applicable' and cannot be changed. " ::= { cmEthernetAccPortEntry 100 } cmEthernetAccPortLoopbackSourceMacControlEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to Enable/Disable the Acc Port Source MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed." ::= { cmEthernetAccPortEntry 101 } cmEthernetAccPortLoopbackDestMacControlEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to Enable/Disable the Acc Port Destination MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed." ::= { cmEthernetAccPortEntry 102 } cmEthernetAccPortLoopbackSourceMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set Acc Port Source MAC Address for frame matching when Acc Port Source MAC Control is enabled." ::= { cmEthernetAccPortEntry 103 } cmEthernetAccPortLoopbackDestMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set Acc Port Destination MAC Address for frame matching when Acc Port Destination MAC Control is enabled." ::= { cmEthernetAccPortEntry 104 } cmEthernetAccPortLoopbackBlockingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows frame blocking when loopback is active. - True: Blocks frames in the non-loopback direction that match the PORT or VLAN received in the non-loopback direction. Discards frames in the loopback direction that match the PORT or VLAN, but do not match the MAC address criteria, - False: No blocking of frames." ::= { cmEthernetAccPortEntry 105 } cmEthernetAccPortRxDeiAction OBJECT-TYPE SYNTAX RxDeiAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Receive DEI Action." ::= { cmEthernetAccPortEntry 106 } cmEthernetAccPortTxDeiAction OBJECT-TYPE SYNTAX TxDeiAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Transmit DEI Action." ::= { cmEthernetAccPortEntry 107 } cmEthernetAccPortRxDeiOuterTagType OBJECT-TYPE SYNTAX DeiOuterTagType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Receive DEI Outer Tag Type." ::= { cmEthernetAccPortEntry 108 } cmEthernetAccPortTxDeiOuterTagType OBJECT-TYPE SYNTAX DeiOuterTagType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Transmit DEI Outer Tag Type." ::= { cmEthernetAccPortEntry 109 } cmEthernetAccPortLaserWDMChannel OBJECT-TYPE SYNTAX SfpChannelIdentifier MAX-ACCESS read-write STATUS current DESCRIPTION "Channel number of WDM tunable XFP setting." ::= { cmEthernetAccPortEntry 110 } cmEthernetAccPortLaserIsTunable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Channel number of WDM tunable XFP setting." ::= { cmEthernetAccPortEntry 111 } cmEthernetAccPortLaserFrequency OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Channel number of WDM tunable XFP setting." ::= { cmEthernetAccPortEntry 112 } cmEthernetAccPortMediaTypeAutoSelected OBJECT-TYPE SYNTAX EthernetMediaType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the auto selected Ethernet Media of the Ethernet Access Port." ::= { cmEthernetAccPortEntry 113 } cmEthernetAccPortLowLatencyQueuingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to Enable/Disable the Low Latency Queuing on the Ethernet Access Port." ::= { cmEthernetAccPortEntry 114 } cmEthernetAccPortA2nSwapPriorityVIDEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to Enable/Disable the Swapping of Priority Vlan Id in the A2N direction." ::= { cmEthernetAccPortEntry 115 } cmEthernetAccPortN2aSwapPriorityVIDEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to Enable/Disable the Swapping of Priority Vlan Id in the N2A direction." ::= { cmEthernetAccPortEntry 116 } cmEthernetAccPortSwapPriorityVID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the value of Vlan Id for the Swapping of Priority Vlan Id operation for both the A2N and N2A direction." ::= { cmEthernetAccPortEntry 117 } cmEthernetAccPortDiagnosticMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc." ::= { cmEthernetAccPortEntry 118 } cmEthernetAccPortIngressCOSPriority OBJECT-TYPE SYNTAX VlanTagType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates which VLAN tag to use for PCP Priority to COS mapping when the port Priority Map Mode is 802.1p. Supported values are inner-vlantag and outer-vlantag. This attribute is only applicable on products when Flowpoint Model is supported. inner-vlantag: The inner VLAN tag PCP Priority of a frame is used for ingress COS mapping. A frame with no inner VLAN tag (untagged or single-tagged) will have a COS equal to the default COS of the port. outer-vlantag: The outer VLAN tag PCP Priority of a frame is used for ingress COS mapping. A frame with no outer VLAN tag (untagged) will have a COS equal to the default COS of the port. This attribute has been deprecated and is not supported. Now, the Priority Map Mode indicates whether it is inner or outer. Use priomap-8021p(4) for outer and priomap-8021p-inner(5) for inner. " DEFVAL { outer-vlantag } ::= { cmEthernetAccPortEntry 119 } cmEthernetAccPortDefaultCOS OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The COS assigned to a frame that does not have a valid COS identifier for the Priority Map Mode of the port. This attribute is only applicable on products when Flowpoint Model is supported. This value is assigned to a frame received on a port when: - the cmEthernetAccPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag; and the frame is untagged - the cmEthernetAccPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag; and the frame has a single VLAN tag - the cmEthernetAccPortPrioMapMode=priomap-8021p, ingressCOSPriority=outer-vlantag; and the frame is untagged - the cmEthernetAccPortPrioMapMode=priomap-dscp; and the frame does not have an IP ethertype - the cmEthernetAccPortPrioMapMode=priomap-tos; and the frame does not have an IP ethertype. This attribute has been deprecated and is not supported. The Default COS is determined from the flowpoint's associated Priority Mapping Profle." DEFVAL { 0 } ::= { cmEthernetAccPortEntry 120 } cmEthernetAccPortTrafficModel OBJECT-TYPE SYNTAX EthernetPortTrafficModel MAX-ACCESS read-write STATUS current DESCRIPTION "The Traffic Management connection model available for the port. - accessFlow: NID Traffic Connection model. - flowpoint: Multipoint and Aggregation Traffic Connection model." DEFVAL { accessFlow } ::= { cmEthernetAccPortEntry 121 } cmEthernetAccPortIndependentShaperBW OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes whether the shaper bw independent." ::= { cmEthernetAccPortEntry 122 } cmEthernetAccPortJdsuLoopbackSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object is applicable when there is jdsu l3 loopback." ::= { cmEthernetAccPortEntry 123 } cmEthernetAccPortWfqSegmentationCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object used to specify the wfq segmentation cos value." ::= { cmEthernetAccPortEntry 124 } cmEthernetAccPortWfqGroupCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object used to specify the wfq group cos value." ::= { cmEthernetAccPortEntry 125 } cmEthernetAccPortWfqGroupEirLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object used to specify the wfq group eir low 32 bits value." ::= { cmEthernetAccPortEntry 126 } cmEthernetAccPortWfqGroupEirHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object used to specify the wfq group eir high 32 bits value." ::= { cmEthernetAccPortEntry 127 } cmEthernetAccPortSilentStartControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allows enabling/disabling of silent start." ::= { cmEthernetAccPortEntry 128 } cmEthernetAccPortSfpLinkLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP Link Length. This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp." ::= { cmEthernetAccPortEntry 129 } cmEthernetAccPortOuterTagTpidOverride OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows enabling/disabling of Outer Tag TPID override. When enabled, values in Outer Tag TPID is applicable on egress Ethernet Access Port." ::= { cmEthernetAccPortEntry 130 } cmEthernetAccPortOuterTagTpid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the egress Outer Tag TPID on the Ethernet Access Port." ::= { cmEthernetAccPortEntry 131 } -- Ethernet Port SFP params cmEthernetAccPortSfpName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the official name of the SFP." ::= { cmEthernetAccPortEntry 132 } cmEthernetAccPortSfpHardwareRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the hardware revision of the SFP." ::= { cmEthernetAccPortEntry 133 } cmEthernetAccPortPersistentLoopbackControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows enabling/disabling of Persistent Loopback Control. The loopback configuration parameters do not survive restart as typically maintenance actions are not persist. Setting this attribute to true shall persist the loopback configuration parameters. When it is set to false the loopback configuration parameters shall not survive a restart." ::= { cmEthernetAccPortEntry 134 } cmEthernetAccPortLoopbackTestReflectorIPv4AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Control that enables/disables Test Reflector IPv4 Address to be used for Test Reflector IP Interface." ::= { cmEthernetAccPortEntry 135 } cmEthernetAccPortLoopbackTestReflectorIPv4Address OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This is the Test Reflector Interface IPv4 address." ::= { cmEthernetAccPortEntry 136 } cmEthernetAccPortLoopbackTestReflectorIPv6AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Control that enables/disables Test Reflector IPv6 Address to be used for Test Reflector IP Interface." ::= { cmEthernetAccPortEntry 137 } cmEthernetAccPortLoopbackTestReflectorIPv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This is the Test Reflector Interface IPv6 address." ::= { cmEthernetAccPortEntry 138 } cmEthernetAccPortPowerdDeviceDetection OBJECT-TYPE SYNTAX ToggleValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage (enable/disable) Power Over Ethernet Detection." ::= { cmEthernetAccPortEntry 139 } cmEthernetAccPortPoEStatus OBJECT-TYPE SYNTAX PoEStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the status of Power Over Ethernet Detection." ::= { cmEthernetAccPortEntry 140 } -- Ethernet Port SFP params cmEthernetAccPortSfpIdentifierValue OBJECT-TYPE SYNTAX SfpIdentifierValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP identifier value." ::= { cmEthernetAccPortEntry 141 } -- -- Ethernet Access Port Control Protocol Disposition -- cmEthernetAccPortCpdTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetAccPortCpdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Access Port Control Protocol Disposition. This table is only applicable for FSP150CM Hub Shelf Release 3.x." ::= { cmFacilityObjects 2 } cmEthernetAccPortCpdEntry OBJECT-TYPE SYNTAX CmEthernetAccPortCpdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetAccPortCpdTable. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Access Port." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetAccPortIndex, cmEthernetAccPortCpdIndex } ::= { cmEthernetAccPortCpdTable 1 } CmEthernetAccPortCpdEntry ::= SEQUENCE { -- Index cmEthernetAccPortCpdIndex Integer32, -- Filtering Criteria cmEthernetAccPortCpdFilterType CmControlProtocolFilterType, cmEthernetAccPortCpdFilterDescr DisplayString, cmEthernetAccPortCpdDispType CmControlProtocolDispType, cmEthernetAccPortCpdMacAddressMatch MacAddress, cmEthernetAccPortCpdMacAddressMask MacAddress, cmEthernetAccPortCpdEthertype Integer32, cmEthernetAccPortCpdEthertypeMask Integer32, cmEthernetAccPortCpdSubtype Integer32, cmEthernetAccPortCpdSubtypeMask Integer32 } cmEthernetAccPortCpdIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this CPD Service Entry." ::= { cmEthernetAccPortCpdEntry 1 } cmEthernetAccPortCpdFilterType OBJECT-TYPE SYNTAX CmControlProtocolFilterType MAX-ACCESS read-only STATUS current DESCRIPTION "This enables specification of type of CPD Filter." ::= { cmEthernetAccPortCpdEntry 2 } cmEthernetAccPortCpdFilterDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This provides description of CPD Filter." ::= { cmEthernetAccPortCpdEntry 3 } cmEthernetAccPortCpdDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "This enables specification of disposion type of CPD Filter." ::= { cmEthernetAccPortCpdEntry 4 } cmEthernetAccPortCpdMacAddressMatch OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This enables provides the Filter MAC Address to match." ::= { cmEthernetAccPortCpdEntry 5 } cmEthernetAccPortCpdMacAddressMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This enables provides the Filter MAC Address Mask to match." ::= { cmEthernetAccPortCpdEntry 6 } cmEthernetAccPortCpdEthertype OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This enables provides the Filter Ethertype to match." ::= { cmEthernetAccPortCpdEntry 7 } cmEthernetAccPortCpdEthertypeMask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This enables provides the Filter Ethertype Mask to match." ::= { cmEthernetAccPortCpdEntry 8 } cmEthernetAccPortCpdSubtype OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This enables provides the Filter Subtype to match." ::= { cmEthernetAccPortCpdEntry 9 } cmEthernetAccPortCpdSubtypeMask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This enables provides the Filter Subtype Mask to match." ::= { cmEthernetAccPortCpdEntry 10 } -- -- Ethernet Access Port Cable Length Benchmark -- cmEthernetAccPortClbTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetAccPortClbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Access Port Cable Length Benchmark." ::= { cmFacilityObjects 3 } cmEthernetAccPortClbEntry OBJECT-TYPE SYNTAX CmEthernetAccPortClbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetAccPortClbTable. These entries represent Cable Length Benchmarks on the Ethernet Access Port." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetAccPortIndex, cmEthernetAccPortClbIndex } ::= { cmEthernetAccPortClbTable 1 } CmEthernetAccPortClbEntry ::= SEQUENCE { cmEthernetAccPortClbIndex Integer32, cmEthernetAccPortClbEnabled TruthValue, cmEthernetAccPortClbLength DisplayString, cmEthernetAccPortClbDescr DisplayString } cmEthernetAccPortClbIndex OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this Cable Length Benchmark Entry specification." ::= { cmEthernetAccPortClbEntry 1 } cmEthernetAccPortClbEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This enables specification of Cable Length Benchmark entry." ::= { cmEthernetAccPortClbEntry 2 } cmEthernetAccPortClbLength OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Cable length of Cable Points Entry. The cable length is of the form XXX[.YY] where XX can be any integer value and YY allows precision of 2 decimals after the floating point. Note that .YY is optional." ::= { cmEthernetAccPortClbEntry 3 } cmEthernetAccPortClbDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "A textual string containing description of cable span." ::= { cmEthernetAccPortClbEntry 4 } -- -- Ethernet Flow -- cmFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF CmFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Flows for configuration purposes. If the corresponding Ethernet Access Port's cmEthernetAccPortMode is connection-oriented and cmEthernetAccPortSvcType is epl, there exists a single Flow in this table. No Flow creation or deletion is allowed on this table for FSP150CM NTU based services. Since Fsp150 R5.6CC release this table is used to manage 2 types of Flows: - Access Port Flow as in the previous releases - Tranparent Flow (new in 5.6CC) A Transparent Flow is Flow between Network-1 and Network-2 ports used to convey pass-thru traffic in the ring topology e.g. ERP. Few of the existing attributes will have new semantix for Transperent Flow. Transparent Flow is a NE level object and hence has different indexing than the Access Port Flow. The valid indices are neIndex and cmFlowIndex. The remaining indices will have constant values as follows: shelfIndex = 1 slotIndex = 255 cmEthernetAccPortIndex = 0 " ::= { cmFacilityObjects 4 } cmFlowEntry OBJECT-TYPE SYNTAX CmFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmFlowTable. These entries represent an Ethernet Flow." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetAccPortIndex, cmFlowIndex } ::= { cmFlowTable 1 } CmFlowEntry ::= SEQUENCE { -- Flow Index/Id cmFlowIndex Integer32, cmFlowCircuitName DisplayString, -- State Management params cmFlowAdminState AdminState, cmFlowOperationalState OperationalState, cmFlowSecondaryState SecondaryState, -- Flow Properties cmFlowType CmFlowType, cmFlowMultiCOS TruthValue, cmFlowA2NCIR Unsigned32, cmFlowA2NEIR Unsigned32, cmFlowN2ARateLimitingEnabled TruthValue, cmFlowN2ACIR Unsigned32, cmFlowN2AEIR Unsigned32, --SNMP row creation cmFlowStorageType StorageType, cmFlowRowStatus RowStatus, --New objects available with FSP150CC GE206 devices (Release 4.1CC) cmFlowTrafficType FlowTrafficType, cmFlowCOS Integer32, --flow membership cmFlowVlanMemberList DisplayString, cmFlowAction FlowVlanActionType, cmFlowActionVlan DisplayString, cmFlowUntaggedMemberEnabled TruthValue, --flow bandwidth cmFlowA2NCIRHi Unsigned32, cmFlowA2NEIRHi Unsigned32, cmFlowN2ACIRHi Unsigned32, cmFlowN2AEIRHi Unsigned32, cmFlowHCOSMgmtEnabled TruthValue, cmFlowGuaranteedA2NBandwidthLo Unsigned32, cmFlowGuaranteedA2NBandwidthHi Unsigned32, cmFlowMaximumA2NBandwidthLo Unsigned32, cmFlowMaximumA2NBandwidthHi Unsigned32, --flow tag management cmFlowCTagControl FlowTagControl, cmFlowCTagVlanId VlanId, cmFlowCTagVlanPriority VlanPriority, cmFlowCTagMatchRxPrio TruthValue, cmFlowSTagControl FlowTagControl, cmFlowSTagVlanId VlanId, cmFlowSTagVlanPriority VlanPriority, cmFlowOuterTagPrioEnabled TruthValue, --N2A COS Priority cmFlowN2ACOSPriorityTagType VlanTagType, --flow frame loss thresholds cmFlowESFramesLossThreshold Integer32, cmFlowSESFramesLossThresholdRatio Integer32, --New objects available with FSP150CC GE201 (Release 4.3CC) cmFlowPolicingEnabled TruthValue, cmFlowPreserveSTagProperties TruthValue, cmFlowInnerTagPrioEnabled TruthValue, --New objects available with FSP150CC GE206 (Release 4.4.2CC) cmFlowN2AOuterTagPrioEnabled TruthValue, --New objects available with FSP150CC GE206V (Release 5.3CC) cmFlowA2NShapingType ShapingType, cmFlowN2AShapingType ShapingType, cmFlowSTagMatchRxPrio TruthValue, --New objects available with FSP150CC GE206V (Release 5.4CC) cmFlowAutoBandwidthConfigEnabled TruthValue, --New objects available with FSP150CC GE206V/GE201/GE206/XG210 (Release 5.6CC) cmFlowPort1 VariablePointer, cmFlowPort2 VariablePointer, cmFlowPolicingControl PolicingControl, cmFlowAutoCIRPercentage Integer32, cmFlowLoopAvoidanceObject VariablePointer, cmFlowConfigType FlowConfigType, cmFlowN2NForwardingEnabled TruthValue, --New objects available with FSP150CC GE206V/XG210 (Release 7.1CC) cmFlowA2NMulticastRateLimitControl TruthValue, cmFlowA2NMulticastRateLimitLo Unsigned32, cmFlowA2NMulticastRateLimitHi Unsigned32, cmFlowA2NBroadcastRateLimitControl TruthValue, cmFlowA2NBroadcastRateLimitLo Unsigned32, cmFlowA2NBroadcastRateLimitHi Unsigned32, cmFlowA2NCombinedRateLimitControl TruthValue, cmFlowA2NCombinedRateLimitLo Unsigned32, cmFlowA2NCombinedRateLimitHi Unsigned32, cmFlowRefPrioMapProfile VariablePointer, cmFlowRefEoMplsPwObject VariablePointer, cmFlowRefN2APrioMapProfile VariablePointer, cmFlowSecureBlockingEnabled TruthValue, cmFlowRefConnectGuardFlowList DisplayString, cmFlowSecureStateList DisplayString, cmFlowIndependentA2NShaperBW TruthValue, cmFlowWfqSegmentationCOS Integer32, cmFlowWfqGroupCOS Integer32, cmFlowWfqGroupEirLo Unsigned32, cmFlowWfqGroupEirHi Unsigned32 } cmFlowIndex OBJECT-TYPE SYNTAX Integer32 (1..400) MAX-ACCESS read-create STATUS current DESCRIPTION "The integer index value corresponding to an Ethernet Flow." ::= { cmFlowEntry 1 } cmFlowCircuitName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows SNMP management entities to provide a circuit identifier with the Flow." ::= { cmFlowEntry 2 } -- State Management params cmFlowAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the Flow." ::= { cmFlowEntry 3 } cmFlowOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the Flow." ::= { cmFlowEntry 4 } cmFlowSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Flow." ::= { cmFlowEntry 5 } cmFlowType OBJECT-TYPE SYNTAX CmFlowType MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the type of the Flow." ::= { cmFlowEntry 6 } cmFlowMultiCOS OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of multiple COS (Class of Service) Flow." ::= { cmFlowEntry 7 } cmFlowA2NCIR OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Information Rate(CIR) of an Flow in the Access to Network (A2N) direction. For a portbased Flow(FSP150CM NTU, CPMR), this object is not settable. This value represents the lower 32-bits of the CIR. For a Multi COS flow, this value is settable only at creation time. In case of Tranparent Flow this object represents N1 to N2 CIR." ::= { cmFlowEntry 8 } cmFlowA2NEIR OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Information Rate(EIR) on an Flow in the Access to Network (A2N) direction. For a portbased Flow(FSP150CM NTU, CPMR), this object is not settable. This value represents the lower 32-bits of the CIR. For a Multi COS flow, this value is settable only at creation time. In case of Tranparent Flow this object represents N1 to N2 EIR." ::= { cmFlowEntry 9 } cmFlowN2ARateLimitingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows management of the N2A rate limiting, independent of A2N rate limiting. When not enabled, N2A specification is the same as A2N. This object is not applicable for Tranparent Flow; the value should be FALSE." ::= { cmFlowEntry 10 } cmFlowN2ACIR OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Information Rate(CIR) of an Flow in the Network to Access (N2A) direction. For a portbased Flow, this object is not settable. This is only settable if cmFlowN2ARateLimitingEnabled is enabled. In case of Tranparent Flow this object represents N2 to N1 CIR." ::= { cmFlowEntry 11 } cmFlowN2AEIR OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Information Rate(CIR) of an Flow in the Network to Access (N2A) direction. For a portbased Flow, this object is not settable. This is only settable if cmFlowN2ARateLimitingEnabled is enabled. In case of Tranparent Flow this object represents N2 to N1 EIR." ::= { cmFlowEntry 12 } cmFlowStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmFlowEntry 13 } cmFlowRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmFlowRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmFlowRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmFlowRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode." ::= { cmFlowEntry 14 } --New objects available with FSP150CC GE206 devices (Release 4.1CC) cmFlowTrafficType OBJECT-TYPE SYNTAX FlowTrafficType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides information on the type of traffic flow supported by the system, i.e.'shaped-only' flows (support only shaping) or 'policed-shaped' (support policing and shaping) flows. 'shaped-only' flow exists for FSP150CM NTU and CPMR access ports. 'policed-shaped' flows are supported in FSP150CC devices. Please note that this object refers to how traffic profiles are managed on devices and is independent of the policing enabling/disabling feature." ::= { cmFlowEntry 15 } cmFlowCOS OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the COS (Class of Service) value for the Traffic Flow. This value is used at flow creation time to identify the COS level of the A2N and N2A shaper. In case of a multi-COS flow, this value is not applicable when multiple policers/shapers exist on the flow. This object is also applicable to specify the COS of a connection-oriented epl service." ::= { cmFlowEntry 16 } --flow membership cmFlowVlanMemberList OBJECT-TYPE SYNTAX DisplayString (SIZE (0..512)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is applicable only when Port is in connection-oriented evpl mode. This attribute is mandatory if creation of connection-oriented evpl regular flow is desired. It allows specification of VLAN members of the Flow. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* or X (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. Once the flow is created, this attribute can only be updated using cmFlowAction and cmFlowActionVlan objects." ::= { cmFlowEntry 17 } cmFlowAction OBJECT-TYPE SYNTAX FlowVlanActionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object is applicable only when Port is in connection-oriented evpl mode and the cmFlowType is regular. This object allows to add or remove the VLAN members specified by cmFlowActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in the object cmFlowActionVlan and then should specify cmFlowAction on whether to add/remove the specified VLAN member." ::= { cmFlowEntry 18 } cmFlowActionVlan OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is applicable only when Port is in connection-oriented evpl mode. This object allows adding/removing VLAN members to a connection-oriented evpl regular flow. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. In order to add/remove VLAN member to a flow, user must specify this object with appropriate VLAN and then invoke cmFlowAction." ::= { cmFlowEntry 19 } cmFlowUntaggedMemberEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is applicable only when Port is in connection-oriented evpl mode for a regular flow as well as default flow. This object allows to specify whether or not the flow supports untagged traffic." ::= { cmFlowEntry 20 } --flow bandwidth cmFlowA2NCIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Information Rate(CIR) of an Flow in the Access to Network (A2N) direction. This value represents the upper 32 bits of CIR (lower is provided in cmFlowA2NCIR). For a Multi COS flow, this value is settable only at creation time. In case of Tranparent Flow this object represents N1 to N2 CIR." ::= { cmFlowEntry 21 } cmFlowA2NEIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Information Rate(EIR) on an Flow in the Access to Network (A2N) direction. For a portbased Flow(FSP150CM NTU, CPMR), this object is not settable. This value represents the higher 32-bits of the CIR. For a Multi COS flow, this value is settable only at creation time. In case of Tranparent Flow this object represents N1 to N2 EIR." ::= { cmFlowEntry 22 } cmFlowN2ACIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Information Rate(CIR) of an Flow in the Network to Access (N2A) direction. This value represents the upper 32 bits of CIR (lower is provided in cmFlowN2ACIR). For a Multi COS flow, this value is settable only at creation time. This is only settable if cmFlowN2ARateLimitingEnabled is enabled. In case of Tranparent Flow this object represents N2 to N1 CIR." ::= { cmFlowEntry 23 } cmFlowN2AEIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Information Rate(EIR) on an Flow in the Network to Access (N2A) direction. For a portbased Flow(FSP150CM NTU, CPMR), this object is not settable. This value represents the higher 32-bits of the CIR. For a Multi COS flow, this value is settable only at creation time. This is only settable if cmFlowN2ARateLimitingEnabled is enabled. In case of Tranparent Flow this object represents N2 to N1 EIR." ::= { cmFlowEntry 24 } cmFlowHCOSMgmtEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows management of Hierarchical COS on the Flow." ::= { cmFlowEntry 25 } cmFlowGuaranteedA2NBandwidthLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provisioning of guaranteed bandwidth (lower 32 bits) of a flow. This value must be greater than or equal to the sum of all individual COS CIRs. In case of Tranparent Flow this object represents N1 to N2 and N2 to N1 guaranteed bandwidth." ::= { cmFlowEntry 26 } cmFlowGuaranteedA2NBandwidthHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provisioning of guaranteed bandwidth (upper 32 bits) of a flow. This value must be greater than or equal to the sum of all individual COS CIRs. In case of Tranparent Flow this object represents N1 to N2 and N2 to N1 guaranteed bandwidth." ::= { cmFlowEntry 27 } cmFlowMaximumA2NBandwidthLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provisioning of maximum bandwidth (lower 32 bits) of a flow. This is the peak limit of a flow. This value must be greater than or equal to the sum of all individual COS CIRs. In case of Tranparent Flow this object represents N1 to N2 and N2 to N1 maximum bandwidth." ::= { cmFlowEntry 28 } cmFlowMaximumA2NBandwidthHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provisioning of maximum bandwidth (upper 32 bits) of a flow. This is the peak limit of a flow. This value must be greater than or equal to the sum of all individual COS CIRs. In case of Tranparent Flow this object represents N1 to N2 and N2 to N1 maximum bandwidth." ::= { cmFlowEntry 29 } --flow tag management cmFlowCTagControl OBJECT-TYPE SYNTAX FlowTagControl MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (cmFlowCTagVlanId) and priority (cmFlowCTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified cmFlowCTagVlanId; if the type is 'none', no C-TAG management is performed. This object is not applicable for Tranparent Flow; the value should be 'none'." ::= { cmFlowEntry 30 } cmFlowCTagVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the VLAN Id to be pushed or swapped, based on the value of cmFlowCTagControl. It is applicable for 'push', 'swapvid' and 'pushvid' control types. This object is not applicable for Tranparent Flow; the value should be 0." ::= { cmFlowEntry 31 } cmFlowCTagVlanPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of cmFlowCTagControl. It is applicable for 'push' control type. This object is not applicable for Tranparent Flow; the value should be 0." ::= { cmFlowEntry 32 } cmFlowCTagMatchRxPrio OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify whether the C-TAG priority be used or ignored for traffic in the N2A direction. This is only applicable if cmFlowCTagControl is 'push'. This object is not applicable for Tranparent Flow; the value should be FALSE." ::= { cmFlowEntry 33 } cmFlowSTagControl OBJECT-TYPE SYNTAX FlowTagControl MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'swapvid', and 'none'. If the type is 'push', the VLAN Id (cmFlowSTagVlanId) and priority (cmFlowSTagVlanPriority) are pushed onto the frame; if the type is 'swapvid', the VLAN Id(12 bits) is swapped with the specified cmFlowSTagVlanId; type is 'none', no S-TAG manament is performed. This object is not applicable for Tranparent Flow; the value should be 'none'." ::= { cmFlowEntry 34 } cmFlowSTagVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the VLAN Id to be pushed, based on the value of cmFlowSTagControl. It is applicable for 'push' control type. This object is not applicable for Tranparent Flow; the value should be 0." ::= { cmFlowEntry 35 } cmFlowSTagVlanPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the VLAN Priority to be pushed, based on the value of cmFlowSTagControl. It is applicable for 'push' control type. This object is not applicable for Tranparent Flow; the value should be 0." ::= { cmFlowEntry 36 } cmFlowOuterTagPrioEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify whether the flow participates in outer-tag priority swap. The Priority Mapping Table cmPrioMapTable allows the A2N outer-tag priority to be specified based on incoming priority at Access Port (based on priority mapping mode - 802.1P, TOS, DSCP). This object is not applicable for Tranparent Flow; the value should be FALSE." ::= { cmFlowEntry 37 } cmFlowN2ACOSPriorityTagType OBJECT-TYPE SYNTAX VlanTagType MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify whether the flow uses the inner-tag or the outer-tag in determining the COS (Class of Service) in the N2A direction. This object is applicable in the case of a Multi COS Flow. This object is not supported for Tranparent Flow;" ::= { cmFlowEntry 38 } --flow frame loss thresholds cmFlowESFramesLossThreshold OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify the number of frames lost per flow that starts counting Errored Seconds (ES) on the flow. This functionality is applicable if the flow is monitored using the Y.1731 ESA functionality." ::= { cmFlowEntry 39 } cmFlowSESFramesLossThresholdRatio OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the flow. This functionality is applicable if the flow is monitored using the Y.1731 ESA functionality." ::= { cmFlowEntry 40 } cmFlowPolicingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is applicable only when Port is in connection-oriented mode. This object is applicable to both epl and evpl mode flows. This object allows to enable/disable the policing function on the flow." ::= { cmFlowEntry 41 } cmFlowPreserveSTagProperties OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is applicable only when Port is in connection-oriented mode. This object is applicable to evpl mode Regular flows, when S-TAG control is specified as SWAPVID. When enabled, this attribute preserves the EtherType (0x88a8) and DEI (Drop Eligibility Indicator) bit in the incoming S-TAG (both from Access and Network Port perspective) into the outgoing S-TAG. When not enabled, the incoming tag is considered as a Q-TAG (0x8100) and both EtherType and CFI (Canonical Form Indicator) bits are over-written by the S-TAG Ethertype (0x88a8) and DEI bit. This object is not applicable for Tranparent Flow; the value should be FALSE." ::= { cmFlowEntry 42 } cmFlowInnerTagPrioEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify whether the flow participates in inner-tag (second) priority swap. The Priority Mapping Table cmPrioMapTable allows the A2N inner-tag priority to be specified based on incoming priority at Access Port (based on priority mapping mode - 802.1P, TOS, DSCP). This object is not applicable for Tranparent Flow; the value should FALSE." ::= { cmFlowEntry 43 } cmFlowN2AOuterTagPrioEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify whether the flow participates in outer-tag priority swap in the A2N direction. The Priority Mapping Table cmNetPortPrioMapTable allows the N2A outer-tag priority to be specified based on incoming priority at Network Port (based on priority mapping mode - 802.1P, TOS, DSCP). This object is not applicable for Tranparent Flow; the value should be FALSE." ::= { cmFlowEntry 44 } cmFlowA2NShapingType OBJECT-TYPE SYNTAX ShapingType MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify whether the traffic in A2N direction passing through this flow is shaped by port-level or flow-level Shapers. In case of portbased flows the value of this attribute is flow-based and cannot be changed. In case of regular and default flows Fsp150 products may support both port-based and flow-based shaping." ::= { cmFlowEntry 45 } cmFlowN2AShapingType OBJECT-TYPE SYNTAX ShapingType MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify whether the traffic in N2A direction passing through this flow is shaped by port-level or flow-level Shapers. In case of portbased flows the value of this attribute is flow-based and cannot be changed. In case of regular and default flows Fsp150 products may support both port-based and flow-based shaping." ::= { cmFlowEntry 46 } cmFlowSTagMatchRxPrio OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the S-TAG priority is used or ignored for traffic in the N2A direction. This is only applicable if cmFlowSTagControl is 'push'. This object is not applicable for Tranparent Flow; the value should be FALSE." ::= { cmFlowEntry 47 } cmFlowAutoBandwidthConfigEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is applicable for Flows on the PWE3 Ethernet Backplane Port. When set to TRUE bandwidth of this Flow will be automatically adjusted when PWE3 SATOPs are provisioned. The bandwidth will be adjusted based on the TDM entities of associated SATOPs. Flow on ports other than PWE3 Ethernet Backplane Port will always have this value set to FALSE and it is not configurable." ::= { cmFlowEntry 48 } cmFlowPort1 OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies a physical or logical port on the Access side of the Flow. This can be Access Port, Access LAG or Access Split Horizion Group. In case of Tranparent Flow this object specifies port1 of the Flow which is Network-1." ::= { cmFlowEntry 49 } cmFlowPort2 OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies a physical or logical port on the Network side of the Flow. This can be Network Port, Network LAG, Network Split Horizion Group ERP or Protection Group. In case of Tranparent Flow this object specifies port2 of the Flow which is Network-2." ::= { cmFlowEntry 50 } cmFlowPolicingControl OBJECT-TYPE SYNTAX PolicingControl MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the direction(s) in which Poling is enabled on traffic within this Flow when cmFlowPolicingEnabled is TRUE." ::= { cmFlowEntry 51 } cmFlowAutoCIRPercentage OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the percentage of available CIR on the Network ports assigned to this Flow when cmFlowAutoBandwidthConfigEnabled is TRUE. The flow guaranteedBW is set to available BW multiplied by this value. This object is only applicable to Tranparent Flow. The value of this object should be 0 for Access Flow." ::= { cmFlowEntry 52 } cmFlowLoopAvoidanceObject OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Loop Avoidance instance to which this Flow belongs. This object is appicable only for Transparent Flow and should point to the ERP instance for which this Flows carries pass-thru traffic. In case of Access Flow the value of this object should be zeroDotZero." ::= { cmFlowEntry 53 } cmFlowConfigType OBJECT-TYPE SYNTAX FlowConfigType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies if this Flow is an Access Flow or Pass-thru Flow." ::= { cmFlowEntry 54 } cmFlowN2NForwardingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to specify whether n2n forwarding is enabled on particular Flow." ::= { cmFlowEntry 55 } cmFlowA2NMulticastRateLimitControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether multicast frames are limited per Flow." ::= { cmFlowEntry 56 } cmFlowA2NMulticastRateLimitLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limit for multicast packets per Flow. When cmFlowA2NMulticastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the low-order 32-bits." ::= { cmFlowEntry 57 } cmFlowA2NMulticastRateLimitHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limit for multicast packets per Flow. When cmFlowA2NMulticastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the high-order 32-bits." ::= { cmFlowEntry 58 } cmFlowA2NBroadcastRateLimitControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether broadcast frames are limited per Flow." ::= { cmFlowEntry 59 } cmFlowA2NBroadcastRateLimitLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limit for multicast packets per Flow. When cmFlowA2NBroadcastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the low-order 32-bits." ::= { cmFlowEntry 60 } cmFlowA2NBroadcastRateLimitHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limit for multicast packets per Flow. When cmFlowA2NBroadcastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the high-order 32-bits." ::= { cmFlowEntry 61 } cmFlowA2NCombinedRateLimitControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether both multicast and broadcast frames are limited per Flow." ::= { cmFlowEntry 62 } cmFlowA2NCombinedRateLimitLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limit for multicast packets per Flow. When cmFlowA2NCombinedRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the low-order 32-bits." ::= { cmFlowEntry 63 } cmFlowA2NCombinedRateLimitHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limit for multicast packets per Flow. When cmFlowA2NCombinedRateLimiteControl is set and value is 0, then all multicast frames are dropped. This object represents the high-order 32-bits." ::= { cmFlowEntry 64 } cmFlowRefPrioMapProfile OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object used to specify the flow's profile." ::= { cmFlowEntry 65 } cmFlowRefEoMplsPwObject OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies EoMpls Pw object OID." ::= { cmFlowEntry 66 } cmFlowRefN2APrioMapProfile OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object used to specify the flow's N2A direction profile." ::= { cmFlowEntry 67 } cmFlowSecureBlockingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object can be used to enable/disable secure block." ::= { cmFlowEntry 68 } cmFlowRefConnectGuardFlowList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the secure flow list, it should be f3ConnectGuardFlowIndex value list split with comma." ::= { cmFlowEntry 69 } cmFlowSecureStateList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the secure state list, it should be secure state value list and split with comma. For detailed description how to identify values, please see FlowSecState in CM-COMMON-MIB." ::= { cmFlowEntry 70 } cmFlowIndependentA2NShaperBW OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object used to specify the flow related A2N shaper BW whether independent." ::= { cmFlowEntry 71 } cmFlowWfqSegmentationCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object used to specify the flow related wfq segmentation COS value." ::= { cmFlowEntry 72 } cmFlowWfqGroupCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object used to specify the flow related wfq group COS value." ::= { cmFlowEntry 73 } cmFlowWfqGroupEirLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object used to specify the flow related wfq group EIR low 32 bits value." ::= { cmFlowEntry 74 } cmFlowWfqGroupEirHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object used to specify the flow related wfq group EIR high 32 bits value." ::= { cmFlowEntry 75 } -- -- Ethernet Flow Control Protocol Disposition -- cmFlowCpdTable OBJECT-TYPE SYNTAX SEQUENCE OF CmFlowCpdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Flow Control Protocol Disposition. This table is only applicable for FSP150CM Hub Shelf Release 3.x." ::= { cmFacilityObjects 5 } cmFlowCpdEntry OBJECT-TYPE SYNTAX CmFlowCpdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmFlowCpdTable. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Network Port." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetAccPortIndex, cmFlowIndex, cmFlowCpdIndex } ::= { cmFlowCpdTable 1 } CmFlowCpdEntry ::= SEQUENCE { -- Index cmFlowCpdIndex Integer32, -- Filter parameters cmFlowCpdFilterType CmControlProtocolFilterType, cmFlowCpdFilterDescr DisplayString, cmFlowCpdDispType CmControlProtocolDispType, cmFlowCpdMacAddressMatch MacAddress, cmFlowCpdMacAddressMask MacAddress, cmFlowCpdEthertype Integer32, cmFlowCpdEthertypeMask Integer32, cmFlowCpdSubtype Integer32, cmFlowCpdSubtypeMask Integer32 } cmFlowCpdIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this CPD Service Entry." ::= { cmFlowCpdEntry 1 } cmFlowCpdFilterType OBJECT-TYPE SYNTAX CmControlProtocolFilterType MAX-ACCESS read-only STATUS current DESCRIPTION "This enables specification of type of CPD Filter." ::= { cmFlowCpdEntry 2 } cmFlowCpdFilterDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This provides description of CPD Filter." ::= { cmFlowCpdEntry 3 } cmFlowCpdDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "This enables specification of disposion type of CPD Filter." ::= { cmFlowCpdEntry 4 } cmFlowCpdMacAddressMatch OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This enables provides the Filter MAC Address to match." ::= { cmFlowCpdEntry 5 } cmFlowCpdMacAddressMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This enables provides the Filter MAC Address Mask to match." ::= { cmFlowCpdEntry 6 } cmFlowCpdEthertype OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This enables provides the Filter Ethertype to match." ::= { cmFlowCpdEntry 7 } cmFlowCpdEthertypeMask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This enables provides the Filter Ethertype Mask to match." ::= { cmFlowCpdEntry 8 } cmFlowCpdSubtype OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This enables provides the Filter Subtype to match." ::= { cmFlowCpdEntry 9 } cmFlowCpdSubtypeMask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This enables provides the Filter Subtype Mask to match." ::= { cmFlowCpdEntry 10 } -- -- Ethernet Flow Quality of Service Shaper -- cmQosShaperTable OBJECT-TYPE SYNTAX SEQUENCE OF CmQosShaperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Quality of Service Shaper for configuration purposes." ::= { cmFacilityObjects 6 } cmQosShaperEntry OBJECT-TYPE SYNTAX CmQosShaperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmQosShaperTable. These entries represent a Quality of Service Shaper." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetAccPortIndex, cmFlowIndex, cmQosShaperTypeIndex, cmQosShaperIndex } ::= { cmQosShaperTable 1 } CmQosShaperEntry ::= SEQUENCE { -- QOS Shaper Index/Id cmQosShaperTypeIndex Integer32, cmQosShaperIndex Integer32, cmQosShaperDirection TrafficDirection, -- State Management params cmQosShaperAdminState AdminState, cmQosShaperOperationalState OperationalState, cmQosShaperSecondaryState SecondaryState, -- QOS Shaper Properties cmQosShaperCIR Unsigned32, cmQosShaperCBS Unsigned32, cmQosShaperEIR Unsigned32, cmQosShaperEBS Unsigned32, cmQosShaperBufferSize Unsigned32, --SNMP row creation cmQosShaperStorageType StorageType, cmQosShaperRowStatus RowStatus, --New objects available with FSP150CC GE206 device (Release 4.1CC) cmQosShaperCOS Integer32, cmQosShaperCIRHi Unsigned32, cmQosShaperEIRHi Unsigned32, cmQosShaperSoamCIRLo Unsigned32, cmQosShaperSoamCIRHi Unsigned32, cmQosShaperSoamEIRLo Unsigned32, cmQosShaperSoamEIRHi Unsigned32, -- wred threshold cmQosShaperWredGreenMinQueueThreshold Unsigned32, cmQosShaperWredGreenMaxQueueThreshold Unsigned32, cmQosShaperWredGreenDropProbability Unsigned32, cmQosShaperWredYellowMinQueueThreshold Unsigned32, cmQosShaperWredYellowMaxQueueThreshold Unsigned32, cmQosShaperWredYellowDropProbability Unsigned32, cmQosShaperAvgFrameSizeBeforeFragment Integer32, cmQosShaperWfqWeight Integer32 } cmQosShaperTypeIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-create STATUS current DESCRIPTION "The unique index value corresponding to a Quality of Service Shaper's direction. Values 1 and 2 are applicable to the Access Flow Shaper: - value of 1 stands for A2N direction, - value of 2 stands for N2A direction. Values 3 and 4 are applicable to Pass-thru Flow Shaper (new in 5.6CC release): - value of 3 stands for N1toN2 direction - value of 4 stands for N2toN1 direction " ::= { cmQosShaperEntry 1 } cmQosShaperIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-create STATUS current DESCRIPTION "The unique integer index value corresponding to a Quality of Service Shaper. In release 5.6CC the range is extended to 1..16 to support duplicate A2N shapers on a Flow. The duplicate shapers are created under a Flow if network interface of the Flow is ERP Group or Split Horizon Group. In case of multi-cos Flow indices 1..8 represent shapers of COS 0..7 going to Network 1 port; indices 9..16 represent shapers for COS 0..7 going to Network 2 port. In case of single-cos Flow index 1 represents shaper going to Network 1 port; index 9 represents shaper going to Network 2 port. " ::= { cmQosShaperEntry 2 } cmQosShaperDirection OBJECT-TYPE SYNTAX TrafficDirection MAX-ACCESS read-only STATUS current DESCRIPTION "The direction of the Quality of Service Shaper." ::= { cmQosShaperEntry 3 } -- State Management params cmQosShaperAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the QOS Shaper." ::= { cmQosShaperEntry 4 } cmQosShaperOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the QOS Shaper." ::= { cmQosShaperEntry 5 } cmQosShaperSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the QOS Shaper." ::= { cmQosShaperEntry 6 } cmQosShaperCIR OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Information Rate(CIR) (Lower 32 bits)of a Shaper." ::= { cmQosShaperEntry 7 } cmQosShaperCBS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Burst Size (CBS) of the Shaper." ::= { cmQosShaperEntry 8 } cmQosShaperEIR OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Information Rate(EIR) (Lower 32 bits) of a Shaper." ::= { cmQosShaperEntry 9 } cmQosShaperEBS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Burst Size (EBS) of the Shaper." ::= { cmQosShaperEntry 10 } cmQosShaperBufferSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Buffer Size of the Shaper." ::= { cmQosShaperEntry 11 } cmQosShaperStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmQosShaperEntry 12 } cmQosShaperRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmQosShaperEntry 13 } cmQosShaperCOS OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the COS (Class of Service) value for the QOS Shaper." ::= { cmQosShaperEntry 14 } cmQosShaperCIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Information Rate(CIR) (Higher 32 bits) of a Shaper." ::= { cmQosShaperEntry 15 } cmQosShaperEIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper." ::= { cmQosShaperEntry 16 } cmQosShaperSoamCIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Soam Commited Information Rate(SOAM-CIR) (Lower 32 bits) of a Shaper." ::= { cmQosShaperEntry 17 } cmQosShaperSoamCIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Soam Commited Information Rate(SOAM-CIR) (Higher 32 bits) on the Shaper." ::= { cmQosShaperEntry 18 } cmQosShaperSoamEIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Soam Excess Information Rate(SOAM-EIR) (Lower 32 bits) of a Shaper." ::= { cmQosShaperEntry 19 } cmQosShaperSoamEIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper." ::= { cmQosShaperEntry 20 } cmQosShaperWredGreenMinQueueThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred green packet min queue threshold value." ::= { cmQosShaperEntry 21 } cmQosShaperWredGreenMaxQueueThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred green packet max queue threshold value." ::= { cmQosShaperEntry 22 } cmQosShaperWredGreenDropProbability OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred green packet drop probability." ::= { cmQosShaperEntry 23 } cmQosShaperWredYellowMinQueueThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred yellow packet min queue threshold value." ::= { cmQosShaperEntry 24 } cmQosShaperWredYellowMaxQueueThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred yellow packet max queue threshold value." ::= { cmQosShaperEntry 25 } cmQosShaperWredYellowDropProbability OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred yellow packet drop probability." ::= { cmQosShaperEntry 26 } cmQosShaperAvgFrameSizeBeforeFragment OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the average frame size before fragmentation." ::= { cmQosShaperEntry 27 } cmQosShaperWfqWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the wfq weight value." ::= { cmQosShaperEntry 28 } -- -- Ethernet Network Port -- cmEthernetNetPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetNetPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Network Port Facilities for configuration purposes." ::= { cmFacilityObjects 7 } cmEthernetNetPortEntry OBJECT-TYPE SYNTAX CmEthernetNetPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetNetPortTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex } ::= { cmEthernetNetPortTable 1 } CmEthernetNetPortEntry ::= SEQUENCE { -- Port Indices cmEthernetNetPortIndex Integer32, cmEthernetNetPortIfIndex InterfaceIndex, cmEthernetNetPortEntityIndex PhysicalIndex, -- State Management params cmEthernetNetPortAdminState AdminState, cmEthernetNetPortOperationalState OperationalState, cmEthernetNetPortSecondaryState SecondaryState, -- Generic Port params cmEthernetNetPortMTU Integer32, -- Generic Ethernet Port params cmEthernetNetPortMediaType EthernetMediaType, cmEthernetNetPortConfigSpeed EthernetPortSpeed, cmEthernetNetPortNegotiatedSpeed EthernetPortSpeed, cmEthernetNetPortMDIXType CmEthernetMDIXType, cmEthernetNetPortJumboFramesEnabled TruthValue, cmEthernetNetPortSfpVendorName DisplayString, cmEthernetNetPortSfpPartNumber DisplayString, cmEthernetNetPortSfpSerialNumber DisplayString, cmEthernetNetPortSfpDateOfManufacture DateAndTime, cmEthernetNetPortSfpConnectorValue SfpConnectorValue, -- EtherJack Diagnosis params cmEthernetNetPortInitiateDiag CmEthernetDiagAction, cmEthernetNetPortDiagnosePair1Cond CmDiagCableCondType, cmEthernetNetPortDiagnosePair2Cond CmDiagCableCondType, cmEthernetNetPortDiagnosePair3Cond CmDiagCableCondType, cmEthernetNetPortDiagnosePair4Cond CmDiagCableCondType, cmEthernetNetPortDiagnoseAutoNegCond CmDiagAutoNegCondType, cmEthernetNetPortDiagnoseLpbkCond CmDiagLpbkCondType, cmEthernetNetPortDiagnoseEfmLpbkCond CmDiagEfmOamLpbkCondType, cmEthernetNetPortDiagnoseResult DisplayString, cmEthernetNetPortDiagnoseTestStatus CmDiagTestStatus, cmEthernetNetPortDiagnoseTestTime DateAndTime, -- Ethernet Loopback params cmEthernetNetPortLoopbackConfig CmLoopbackType, cmEthernetNetPortLoopbackStatus CmLoopbackType, cmEthernetNetPortLoopbackTime Integer32, cmEthernetNetPortLoopbackSwapSADA CmSwapSADAType, cmEthernetNetPortOuterVlanLoopbackMask INTEGER, cmEthernetNetPortOuterVlanLoopback1 DisplayString, cmEthernetNetPortOuterVlanLoopback2 DisplayString, cmEthernetNetPortOuterVlanLoopback3 DisplayString, cmEthernetNetPortInnerVlanLoopbackMask INTEGER, cmEthernetNetPortInnerVlanLoopback1 DisplayString, cmEthernetNetPortInnerVlanLoopback2 DisplayString, cmEthernetNetPortInnerVlanLoopback3 DisplayString, -- Link Loss Forwarding params cmEthernetNetPortLinkLossFwdEnabled TruthValue, cmEthernetNetPortLinkLossFwdSignalType CmLinkLossFwdSignalType, cmEthernetNetPortLinkLossFwdTriggerTypes CmLinkLossFwdTriggerTypes, cmEthernetNetPortLinkLossFwdDelay Integer32, cmEthernetNetPortLinkLossFwdActive TruthValue, cmEthernetNetPortLinkLossFwdPartnerEnabled TruthValue, cmEthernetNetPortLinkLossFwdLocalLinkId Integer32, cmEthernetNetPortLinkLossFwdRemoteLinkIds CmRemoteLinkIds, -- OAM params cmEthernetNetPortOamId Integer32, cmEthernetNetPortOamAdminDisposition CmControlProtocolDispType, cmEthernetNetPortOamDiscoveryState CmOamDiscoveryState, cmEthernetNetPortOamLocalVarRtrvsEnabled TruthValue, cmEthernetNetPortOamLocalLinkEventsEnabled TruthValue, cmEthernetNetPortOamLocalOamLoopbacksSupported TruthValue, cmEthernetNetPortOamLocalUnidirSupportEnabled TruthValue, cmEthernetNetPortOamLocalMaxPDUSize Integer32, cmEthernetNetPortOamLocalMode CmOamMode, cmEthernetNetPortOamRemoteMacAddress MacAddress, cmEthernetNetPortOamRemoteVarRtrvsEnabled TruthValue, cmEthernetNetPortOamRemoteLinkEventsEnabled TruthValue, cmEthernetNetPortOamRemoteOamLoopbacksSupported TruthValue, cmEthernetNetPortOamRemoteUnidirSupportEnabled TruthValue, cmEthernetNetPortOamRemoteMaxPDUSize Integer32, cmEthernetNetPortOamRemoteMode CmOamMode, -- Ethernet Port Traffic params cmEthernetNetPortRxPauseDisposition CmControlProtocolDispType, cmEthernetNetPortTxPauseEnabled TruthValue, cmEthernetNetPortAfpType CmAfpType, --New objects available with FSP150CC GE206 device (Release 4.1CC) -- Generic Ethernet Port params cmEthernetNetPortMDIXStatus CmEthernetMDIXType, cmEthernetNetPortSfpReach Integer32, cmEthernetNetPortSfpLaserWaveLength Integer32, cmEthernetNetPortSfpMediaType SfpMediaType, -- EFM OAM params cmEthernetNetPortOamEnabled TruthValue, cmEthernetNetPortOamAdminState CmOamAdminState, -- Ethernet Port Traffic params cmEthernetNetPortShapingEnabled TruthValue, cmEthernetNetPortShapedSpeedLo Unsigned32, cmEthernetNetPortShapedSpeedHi Unsigned32, cmEthernetNetPortQinQEtherType Unsigned32, -- LLF params cmEthernetNetPortLinkLossFwdTxActionType CmLinkLossFwdTxActionType, cmEthernetNetPortLinkLossFwdRxRLDLinkIds CmRemoteLinkIds, -- EtherJack Diagnosis params cmEthernetNetPortAutoDiagEnabled TruthValue, --Synchronous Port params cmEthernetNetPortSyncEEnabled TruthValue, cmEthernetNetPortQLModeEnabled TruthValue, cmEthernetNetPortExpectedQL SSMQualityLevel, cmEthernetNetPortAssumedQL SSMQualityLevel, cmEthernetNetPortReceivedQL SSMQualityLevel, cmEthernetNetPortTransmitQL SSMQualityLevel, --Network Port Priority Mapping Mode cmEthernetNetPortPrioMapMode PriorityMapMode, --PCP DE Pairs cmEthernetNetPortDeiEnable TruthValue, cmEthernetNetPortPcpDEEncType PcpDEEncType, cmEthernetNetPortPcpDEPairsAction PcpDEPairsAction, cmEthernetNetPortSSMRemoteMacAddress MacAddress, --XG params cmEthernetNetPortXgePhyType XgePhyType, --Mac Loopback Params cmEthernetNetPortLoopbackSourceMacControlEnabled TruthValue, cmEthernetNetPortLoopbackDestMacControlEnabled TruthValue, cmEthernetNetPortLoopbackSourceMacAddress MacAddress, cmEthernetNetPortLoopbackDestMacAddress MacAddress, cmEthernetNetPortLoopbackBlockingEnabled TruthValue, -- Ethernet Port Traffic params cmEthernetNetPortRxDeiAction RxDeiAction, cmEthernetNetPortTxDeiAction TxDeiAction, cmEthernetNetPortRxDeiOuterTagType DeiOuterTagType, cmEthernetNetPortTxDeiOuterTagType DeiOuterTagType, -- XFP params cmEthernetNetPortLaserWDMChannel SfpChannelIdentifier, cmEthernetNetPortLaserIsTunable TruthValue, cmEthernetNetPortLaserFrequency Unsigned32, -- Generic Ethernet Port params - added in R6.5 cmEthernetNetPortMediaTypeAutoSelected EthernetMediaType, -- Ethernet Port Traffic params - added in R6.5 cmEthernetNetPortLowLatencyQueuingEnabled TruthValue, cmEthernetNetPortDiagnosticMacAddress MacAddress, cmEthernetNetPortIngressCOSPriority VlanTagType, cmEthernetNetPortDefaultCOS Integer32, cmEthernetNetPortTrafficModel EthernetPortTrafficModel, cmEthernetNetPortIndependentShaperBW TruthValue, cmEthernetNetPortExpDEEncType PcpDEEncType, cmEthernetNetPortExpDEPairsAction PcpDEPairsAction, cmEthernetNetPortIpPrecDEEncType PcpDEEncType, cmEthernetNetPortIpPrecDEPairsAction PcpDEPairsAction, cmEthernetNetPortEncapPcpDEEncodingType PcpDEEncType, cmEthernetNetPortEncapPcpDEPairsAction PcpDEPairsAction, cmEthernetNetPortJdsuLoopbackSrcIp IpAddress, cmEthernetNetPortWfqSegmentationCOS Integer32, cmEthernetNetPortWfqGroupCOS Integer32, cmEthernetNetPortWfqGroupEirLo Unsigned32, cmEthernetNetPortWfqGroupEirHi Unsigned32, cmEthernetNetPortSilentStartControl TruthValue, cmEthernetNetPortSfpLinkLength Integer32, -- Ethernet Port Traffic params cmEthernetNetPortOuterTagTpidOverride TruthValue, cmEthernetNetPortOuterTagTpid Unsigned32, -- Ethernet Port SFP params cmEthernetNetPortSfpName DisplayString, cmEthernetNetPortSfpHardwareRevision DisplayString, -- Persistent Loopback Control cmEthernetNetPortPersistentLoopbackControl TruthValue, -- Ethernet Port Loopback Test Reflector params cmEthernetNetPortLoopbackTestReflectorIPv4AddressControl TruthValue, cmEthernetNetPortLoopbackTestReflectorIPv4Address IpAddress, cmEthernetNetPortLoopbackTestReflectorIPv6AddressControl TruthValue, cmEthernetNetPortLoopbackTestReflectorIPv6Address Ipv6Address, -- Ethernet Port SFP params cmEthernetNetPortSfpIdentifierValue SfpIdentifierValue } -- Port Indices cmEthernetNetPortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this Ethernet Network Port within a card. Note that each Ethernet Network Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex." ::= { cmEthernetNetPortEntry 1 } cmEthernetNetPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the same value as ifIndex for Ethernet Network Port. An integer index value used to uniquely identify this Ethernet Network Port." ::= { cmEthernetNetPortEntry 2 } cmEthernetNetPortEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Entity Index from ENTITY-MIB for this port." ::= { cmEthernetNetPortEntry 3 } -- State Management params cmEthernetNetPortAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the Ethernet Network Port." ::= { cmEthernetNetPortEntry 4 } cmEthernetNetPortOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the Ethernet Network Port." ::= { cmEthernetNetPortEntry 5 } cmEthernetNetPortSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Ethernet Network Port." ::= { cmEthernetNetPortEntry 6 } -- Generic Port params cmEthernetNetPortMTU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the MTU on the Ethernet Network Port." ::= { cmEthernetNetPortEntry 7 } cmEthernetNetPortMediaType OBJECT-TYPE SYNTAX EthernetMediaType MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the type of Ethernet Media on the Ethernet Network Port." ::= { cmEthernetNetPortEntry 8 } cmEthernetNetPortConfigSpeed OBJECT-TYPE SYNTAX EthernetPortSpeed MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to configure the speed of the Ethernet Network Port." ::= { cmEthernetNetPortEntry 9 } cmEthernetNetPortNegotiatedSpeed OBJECT-TYPE SYNTAX EthernetPortSpeed MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the negotiated speed of the Ethernet Network Port." ::= { cmEthernetNetPortEntry 10 } cmEthernetNetPortMDIXType OBJECT-TYPE SYNTAX CmEthernetMDIXType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows management of MDIX property on Ethernet Network Port." ::= { cmEthernetNetPortEntry 11 } cmEthernetNetPortJumboFramesEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows enabling/disabling jumbo frames support on the Ethernet Network Port. This object is only applicable for Ethernet Network Port on R3.1CM NTU Card." ::= { cmEthernetNetPortEntry 12 } cmEthernetNetPortSfpVendorName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the vendor name of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp." ::= { cmEthernetNetPortEntry 13 } cmEthernetNetPortSfpPartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the part number of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp." ::= { cmEthernetNetPortEntry 14 } cmEthernetNetPortSfpSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the serial number of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp." ::= { cmEthernetNetPortEntry 15 } cmEthernetNetPortSfpDateOfManufacture OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the date of manufacture of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp." ::= { cmEthernetNetPortEntry 16 } cmEthernetNetPortSfpConnectorValue OBJECT-TYPE SYNTAX SfpConnectorValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP connector value. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp." ::= { cmEthernetNetPortEntry 17 } -- EtherJack Diagnosis params cmEthernetNetPortInitiateDiag OBJECT-TYPE SYNTAX CmEthernetDiagAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to initiate Etherjack diagnosis on the Ethernet Network Port." ::= { cmEthernetNetPortEntry 18 } cmEthernetNetPortDiagnosePair1Cond OBJECT-TYPE SYNTAX CmDiagCableCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides diagnosis results for the cable Pair 1 on Ethernet Network Port." ::= { cmEthernetNetPortEntry 19 } cmEthernetNetPortDiagnosePair2Cond OBJECT-TYPE SYNTAX CmDiagCableCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides diagnosis results for the cable Pair 2 on Ethernet Network Port." ::= { cmEthernetNetPortEntry 20 } cmEthernetNetPortDiagnosePair3Cond OBJECT-TYPE SYNTAX CmDiagCableCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides diagnosis results for the cable Pair 3 on Ethernet Network Port." ::= { cmEthernetNetPortEntry 21 } cmEthernetNetPortDiagnosePair4Cond OBJECT-TYPE SYNTAX CmDiagCableCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides diagnosis results for the cable Pair 4 on Ethernet Network Port." ::= { cmEthernetNetPortEntry 22 } cmEthernetNetPortDiagnoseAutoNegCond OBJECT-TYPE SYNTAX CmDiagAutoNegCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides auto negotiation results of the diagnosis test on Ethernet Network Port." ::= { cmEthernetNetPortEntry 23 } cmEthernetNetPortDiagnoseLpbkCond OBJECT-TYPE SYNTAX CmDiagLpbkCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides port loopback results of the diagnosis test on Ethernet Network Port." ::= { cmEthernetNetPortEntry 24 } cmEthernetNetPortDiagnoseEfmLpbkCond OBJECT-TYPE SYNTAX CmDiagEfmOamLpbkCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides remote EFM loopback results of the diagnosis test on Ethernet Network Port." ::= { cmEthernetNetPortEntry 25 } cmEthernetNetPortDiagnoseResult OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides results of the diagnosis test in string form on Ethernet Network Port." ::= { cmEthernetNetPortEntry 26 } cmEthernetNetPortDiagnoseTestStatus OBJECT-TYPE SYNTAX CmDiagTestStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the current status of the diagnosis test on Ethernet Access Port." ::= { cmEthernetNetPortEntry 27 } cmEthernetNetPortDiagnoseTestTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the time when diagnosis test was last executed." ::= { cmEthernetNetPortEntry 28 } -- Ethernet Loopback params cmEthernetNetPortLoopbackConfig OBJECT-TYPE SYNTAX CmLoopbackType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to initiate loopbacks on on the Ethernet Network Port." ::= { cmEthernetNetPortEntry 29 } cmEthernetNetPortLoopbackStatus OBJECT-TYPE SYNTAX CmLoopbackType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides status of the current loopback on the Ethernet Network Port." ::= { cmEthernetNetPortEntry 30 } cmEthernetNetPortLoopbackTime OBJECT-TYPE SYNTAX Integer32 (2..300) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify time for timed-loopbacks on on the Ethernet Network Port." ::= { cmEthernetNetPortEntry 31 } cmEthernetNetPortLoopbackSwapSADA OBJECT-TYPE SYNTAX CmSwapSADAType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify whether or not the loopbacked frame will have the Source Address and Destination Address swapped." ::= { cmEthernetNetPortEntry 32 } cmEthernetNetPortOuterVlanLoopbackMask OBJECT-TYPE SYNTAX INTEGER (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the outer VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Outer VLAN 1 Loopback Enabled 2 Outer VLAN 2 Loopback Enabled 4 Outer VLAN 3 Loopback Enabled Value of 0 means that no VLANs are enabled." ::= { cmEthernetNetPortEntry 33 } cmEthernetNetPortOuterVlanLoopback1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the outer VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetNetPortEntry 34 } cmEthernetNetPortOuterVlanLoopback2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the outer VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetNetPortEntry 35 } cmEthernetNetPortOuterVlanLoopback3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the outer VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetNetPortEntry 36 } cmEthernetNetPortInnerVlanLoopbackMask OBJECT-TYPE SYNTAX INTEGER (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the inner VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Inner VLAN 1 Loopback Enabled 2 Inner VLAN 2 Loopback Enabled 4 Inner VLAN 3 Loopback Enabled Value of 0 means that no VLANs are enabled." ::= { cmEthernetNetPortEntry 37 } cmEthernetNetPortInnerVlanLoopback1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the inner VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetNetPortEntry 38 } cmEthernetNetPortInnerVlanLoopback2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the inner VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetNetPortEntry 39 } cmEthernetNetPortInnerVlanLoopback3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the inner VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetNetPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetNetPortEntry 40 } -- Link Loss Forwarding params cmEthernetNetPortLinkLossFwdEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows enabling/disabling link loss forwarding on the Ethernet Network Port." ::= { cmEthernetNetPortEntry 41 } cmEthernetNetPortLinkLossFwdSignalType OBJECT-TYPE SYNTAX CmLinkLossFwdSignalType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object allows definition of the link loss forwarding signalling type. This is applicable only if cmEthernetNetPortLinkLossFwdEnabled is enabled. This object is only valid for FSP150CM Release 3.1. This object is deprecated henceforth. Link Loss signalling will be supported using the object cmEthernetAccPortLinkLossFwdTxActionType." ::= { cmEthernetNetPortEntry 42 } cmEthernetNetPortLinkLossFwdTriggerTypes OBJECT-TYPE SYNTAX CmLinkLossFwdTriggerTypes MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows definition of the link loss forwarding trigger types. This is applicable only if cmEthernetAccPortLinkLossFwdEnabled is enabled." ::= { cmEthernetNetPortEntry 43 } cmEthernetNetPortLinkLossFwdDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the delay between detection of link loss and signalling of link loss forwarding. Time specified is in seconds." ::= { cmEthernetNetPortEntry 44 } cmEthernetNetPortLinkLossFwdActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the link loss forwarding status indicating if link loss forwarding is currently being signaled via the port." ::= { cmEthernetNetPortEntry 45 } cmEthernetNetPortLinkLossFwdPartnerEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the indication of a link partners ability to support link loss forwarding via EFM, i.e. from received organization specific OAMPDUs." ::= { cmEthernetNetPortEntry 46 } cmEthernetNetPortLinkLossFwdLocalLinkId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows configuration of the Local Link Id on Ethernet Network port." ::= { cmEthernetNetPortEntry 47 } cmEthernetNetPortLinkLossFwdRemoteLinkIds OBJECT-TYPE SYNTAX CmRemoteLinkIds MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows enabling/disabling Remote Link Ids on Ethernet Network port. By setting the appropriate bit positions, the Ethernet Network port is able to distinguish the remote side client ports from the Remote Link Down PDUs coming from remote end." ::= { cmEthernetNetPortEntry 48 } -- OAM params cmEthernetNetPortOamId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OAM Id. This is unique EFM OAM sublayer port id." ::= { cmEthernetNetPortEntry 49 } cmEthernetNetPortOamAdminDisposition OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Ethernet Network Port's EFM OAM Administrative Disposition. This object is applicable only for FSP150CM Release 3.1. This object is deprecated henceforth. With FSP150CC Release 4.1, this property is managed using the Control Protocol Disposition tables." ::= { cmEthernetNetPortEntry 50 } cmEthernetNetPortOamDiscoveryState OBJECT-TYPE SYNTAX CmOamDiscoveryState MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Network Port's OAM discovery state." ::= { cmEthernetNetPortEntry 51 } cmEthernetNetPortOamLocalVarRtrvsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows specification of whether the Ethernet Network Port supports sending variable response OAMPDUs." ::= { cmEthernetNetPortEntry 52 } cmEthernetNetPortOamLocalLinkEventsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows specification of whether the Ethernet Network Port supports interpreting Link Events." ::= { cmEthernetNetPortEntry 53 } cmEthernetNetPortOamLocalOamLoopbacksSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of whether the Ethernet Network Port is capable of OAM remote loopback mode." ::= { cmEthernetNetPortEntry 54 } cmEthernetNetPortOamLocalUnidirSupportEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows specification of whether the Ethernet Network Port is capable of sending OAMPDUs when the receive path is non-operational." ::= { cmEthernetNetPortEntry 55 } cmEthernetNetPortOamLocalMaxPDUSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the largest OAMPDU, in octets, supported by the Ethernet Network Port. This value is compared to the remote Maximum PDU Size and the smaller of the two is used." ::= { cmEthernetNetPortEntry 56 } cmEthernetNetPortOamLocalMode OBJECT-TYPE SYNTAX CmOamMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to configure the OAM sublayer entity in either Active or Passive mode." ::= { cmEthernetNetPortEntry 57 } cmEthernetNetPortOamRemoteMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of the Remote Mac Address." ::= { cmEthernetNetPortEntry 58 } cmEthernetNetPortOamRemoteVarRtrvsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of whether the remote OAM entity supports sending variable response OAMPDUs." ::= { cmEthernetNetPortEntry 59 } cmEthernetNetPortOamRemoteLinkEventsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of whether the remote OAM entity supports interpreting Link Events." ::= { cmEthernetNetPortEntry 60 } cmEthernetNetPortOamRemoteOamLoopbacksSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of whether the remote OAM entity supports OAM remote loopback mode." ::= { cmEthernetNetPortEntry 61 } cmEthernetNetPortOamRemoteUnidirSupportEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of whether the remote OAM entity is capable of sending OAMPDUs when the receive path is non-operational." ::= { cmEthernetNetPortEntry 62 } cmEthernetNetPortOamRemoteMaxPDUSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of the remote OAM entity maximum OAMPDU size." ::= { cmEthernetNetPortEntry 63 } cmEthernetNetPortOamRemoteMode OBJECT-TYPE SYNTAX CmOamMode MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows to retrieve whether the remote OAM sublayer entity is either in Active or Passive mode." ::= { cmEthernetNetPortEntry 64 } -- Ethernet Port Traffic params cmEthernetNetPortRxPauseDisposition OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows enabling/disabling receive pause frames on Ethernet Network port. This object is not applicable for FSP150CC Release 4.1 products." ::= { cmEthernetNetPortEntry 65 } cmEthernetNetPortTxPauseEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows enabling/disabling transmit pause frames on Ethernet Network port. This object is not applicable for FSP150CC Release 4.1 products." ::= { cmEthernetNetPortEntry 66 } cmEthernetNetPortAfpType OBJECT-TYPE SYNTAX CmAfpType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Acceptable Frame Policy on Ethernet Network port. Users can specify whether the port supports only tagged frames, only untagged frames or both tagged and untagged frames. This object is not applicable for FSP150CC Release 4.1 products." ::= { cmEthernetNetPortEntry 67 } -- Generic Ethernet Port params cmEthernetNetPortMDIXStatus OBJECT-TYPE SYNTAX CmEthernetMDIXType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the current MDIX status of the Ethernet Network port." ::= { cmEthernetNetPortEntry 68 } cmEthernetNetPortSfpReach OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP Reach in meters. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp." ::= { cmEthernetNetPortEntry 69 } cmEthernetNetPortSfpLaserWaveLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP Laser Wave Length in nano meters. This is applicable only when cmEthernetNetPortMediaType is fiber." ::= { cmEthernetNetPortEntry 70 } cmEthernetNetPortSfpMediaType OBJECT-TYPE SYNTAX SfpMediaType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP Media Type. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp." ::= { cmEthernetNetPortEntry 71 } cmEthernetNetPortOamEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the EFM OAM on Ethernet Network Port." ::= { cmEthernetNetPortEntry 72 } cmEthernetNetPortOamAdminState OBJECT-TYPE SYNTAX CmOamAdminState MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the EFM OAM Admin State." ::= { cmEthernetNetPortEntry 73 } -- Ethernet Port Traffic params cmEthernetNetPortShapingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the Network Port Shaping. When enabled, values in cmEthernetNetPortShapedSpeedLo and cmEthernetNetPortShapedSpeedHi are applicable." ::= { cmEthernetNetPortEntry 74 } cmEthernetNetPortShapedSpeedLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the lower 32 bits of the Network Port Shaped speed. This value is applicable when cmEthernetNetPortShapingEnabled is enabled." ::= { cmEthernetNetPortEntry 75 } cmEthernetNetPortShapedSpeedHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the higher 32 bits of the Network Port Shaped speed. This value is applicable when cmEthernetNetPortShapingEnabled is enabled." ::= { cmEthernetNetPortEntry 76 } cmEthernetNetPortQinQEtherType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Q-in-Q Ether Type on the Network Port. Setting this value to 0 will disable the Q-in-Q override on the Network Port." ::= { cmEthernetNetPortEntry 77 } -- Link Loss Forwarding params cmEthernetNetPortLinkLossFwdTxActionType OBJECT-TYPE SYNTAX CmLinkLossFwdTxActionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Network Port's behavior when link loss forwarding trigger events occur on the Access Port." ::= { cmEthernetNetPortEntry 78 } cmEthernetNetPortLinkLossFwdRxRLDLinkIds OBJECT-TYPE SYNTAX CmRemoteLinkIds MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the received Remote Link IDs in EFM RLD messages on the Network Port." ::= { cmEthernetNetPortEntry 79 } -- EtherJack Diagnosis params cmEthernetNetPortAutoDiagEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to enable or disable the automatic Cable Diagnostic tests when the cable is removed from the port." ::= { cmEthernetNetPortEntry 80 } --Synchronous Port params cmEthernetNetPortSyncEEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify whether the Ethernet Network Port can be enabled/disabled for Synchronous Ethernet. This object is only applicable for Synchronous Ethernet capable ports. When enabled, on receive side -port can extract the frequency of its input signal and pass the recovered clock to the system clock -port processes the ESMC(Ethernet Synchronization Messaging Channel) and extracts the QL (when also QL enabled) -port is eligible to be selected as a system clock reference When enabled, on transmit side -port's transmit clock is locked to the system clock -port generates an ESMC to generate a QL (when also QL enabled) When disabled, on receive side, -port does not pass the recovered clock to the system clock -port does not process the ESMC (if present) -port is not eligible to be selected as a system clock reference When disabled, on transmit side -port's output frequency may be synchronized to the system clock -port does not generate an ESMC." ::= { cmEthernetNetPortEntry 81 } cmEthernetNetPortQLModeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify whether the Ethernet Network Port can be enabled/disabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetNetPortQLModeEnabled is set to true. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs." ::= { cmEthernetNetPortEntry 82 } cmEthernetNetPortExpectedQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the expected QL when the Ethernet Network Port is enabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetNetPortQLModeEnabled is set to true. This object allows the user to set a minimum expected received Quality Level on the port. The valid values depend upon the SYNC entity's Network Clock Type. A value of None represents that a minimum Quality Level is not expected. The default value shall be None." ::= { cmEthernetNetPortEntry 83 } cmEthernetNetPortAssumedQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the assumed QL on the Ethernet Network Port. This object is only applicable for Synchronous Ethernet capable ports. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port's QL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference." ::= { cmEthernetNetPortEntry 84 } cmEthernetNetPortReceivedQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Received QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable.This object is only applicable for Synchronous Ethernet capable ports." ::= { cmEthernetNetPortEntry 85 } cmEthernetNetPortTransmitQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Transmitted QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable. This object is only applicable for Synchronous Ethernet capable ports." ::= { cmEthernetNetPortEntry 86 } cmEthernetNetPortPrioMapMode OBJECT-TYPE SYNTAX PriorityMapMode MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Priority Mapping Mode used for classification of frames." ::= { cmEthernetNetPortEntry 87 } cmEthernetNetPortDeiEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This is a port level control to reset the DEI (Drop Eligibility Indicator) bit in the S-Tag, if the downstream equipment supports S-Tag TPID (EtherType) but cannot handle DEI bit set. In the receive direction, it uses the S-TAG DEI when enabled, else ignores it. The following comment is NOT relevant to OSA8.1.1, since this object is still supported by OSA8.1.1. The object has been deprecated. The respective configuration should be managed by following objects: cmEthernetNetPortRxDeiAction, cmEthernetNetPortTxDeiAction, cmEthernetNetPortRxDeiOuterTagType, cmEthernetNetPortTxDeiOuterTagType." ::= { cmEthernetNetPortEntry 88 } cmEthernetNetPortPcpDEEncType OBJECT-TYPE SYNTAX PcpDEEncType MAX-ACCESS read-write STATUS current DESCRIPTION "This is a port level control that specifies the mode of drop eligibility encoding in PCP bits of the VLAN tag." ::= { cmEthernetNetPortEntry 89 } cmEthernetNetPortPcpDEPairsAction OBJECT-TYPE SYNTAX PcpDEPairsAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetNetPortPcpDEEncType is of type 7p1d, 6p2d, 5p3d, the cmNetPortPcpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility." ::= { cmEthernetNetPortEntry 90 } cmEthernetNetPortSSMRemoteMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of the Remote Mac Address, when the port is peering using SSM." ::= { cmEthernetNetPortEntry 91 } cmEthernetNetPortXgePhyType OBJECT-TYPE SYNTAX XgePhyType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the PHY type of 10G Ethernet Port. 10G ports can operate in LAN-PHY or WAN-PHY mode. The default mode is LAN-PHY and port rate in this mode is 10Gbps. In WAN-PHY mode the port rate is 9.29Gbps. This attribute is only applicable for ports configured to work at speed-10G-full. For other speeds the value of this object must be 'not-applicable' and cannot be changed. " ::= { cmEthernetNetPortEntry 92 } cmEthernetNetPortLoopbackSourceMacControlEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to Enable/Disable the Net Port Source MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed." ::= { cmEthernetNetPortEntry 93 } cmEthernetNetPortLoopbackDestMacControlEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to Enable/Disable the Net Port Destination MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed." ::= { cmEthernetNetPortEntry 94 } cmEthernetNetPortLoopbackSourceMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set Net Port Source MAC Address for frame matching when Net Port Source MAC Control is enabled." ::= { cmEthernetNetPortEntry 95 } cmEthernetNetPortLoopbackDestMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set Net Port Destination MAC Address for frame matching when Net Port Destination MAC Control is enabled." ::= { cmEthernetNetPortEntry 96 } cmEthernetNetPortLoopbackBlockingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows frame blocking when loopback is active. - True: Blocks frames in the non-loopback direction that match the PORT or VLAN received in the non-loopback direction. Discards frames in the loopback direction that match the PORT or VLAN, but do not match the MAC address criteria, - False: No blocking of frames." ::= { cmEthernetNetPortEntry 97 } cmEthernetNetPortRxDeiAction OBJECT-TYPE SYNTAX RxDeiAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Receive DEI Action." ::= { cmEthernetNetPortEntry 98 } cmEthernetNetPortTxDeiAction OBJECT-TYPE SYNTAX TxDeiAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Transmit DEI Action." ::= { cmEthernetNetPortEntry 99 } cmEthernetNetPortRxDeiOuterTagType OBJECT-TYPE SYNTAX DeiOuterTagType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Receive DEI Outer Tag Type." ::= { cmEthernetNetPortEntry 100 } cmEthernetNetPortTxDeiOuterTagType OBJECT-TYPE SYNTAX DeiOuterTagType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Transmit DEI Outer Tag Type." ::= { cmEthernetNetPortEntry 101 } cmEthernetNetPortLaserWDMChannel OBJECT-TYPE SYNTAX SfpChannelIdentifier MAX-ACCESS read-write STATUS current DESCRIPTION "Channel number of WDM tunable XFP setting." ::= { cmEthernetNetPortEntry 102 } cmEthernetNetPortLaserIsTunable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Channel number of WDM tunable XFP setting." ::= { cmEthernetNetPortEntry 103 } cmEthernetNetPortLaserFrequency OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Channel number of WDM tunable XFP setting." ::= { cmEthernetNetPortEntry 104 } cmEthernetNetPortMediaTypeAutoSelected OBJECT-TYPE SYNTAX EthernetMediaType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the auto selected Ethernet Media of the Ethernet Network Port." ::= { cmEthernetNetPortEntry 105 } cmEthernetNetPortLowLatencyQueuingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to Enable/Disable the Low Latency Queuing on the Ethernet Network Port." ::= { cmEthernetNetPortEntry 106 } cmEthernetNetPortDiagnosticMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc." ::= { cmEthernetNetPortEntry 107 } cmEthernetNetPortIngressCOSPriority OBJECT-TYPE SYNTAX VlanTagType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates the VLAN tag to use for PCP Priority to COS mapping when the port Priority Map Mode is 802.1p. Supported values are inner-vlantag and outer-vlantag. This attribute is only applicable on products when Flowpoint Model is supported. inner-vlantag: The inner VLAN tag PCP Priority of a frame is used for ingress COS mapping. A frame with no inner VLAN tag (untagged or single-tagged) will have a COS equal to the default COS of the port. outer-vlantag: The outer VLAN tag PCP Priority of a frame is used for ingress COS mapping. A frame with no outer VLAN tag (untagged) will have a COS equal to the default COS of the port. This attribute has been deprecated and is not supported. Now, the Priority Map Mode indicates whether it is inner or outer. Use priomap-8021p(4) for outer and priomap-8021p-inner(5) for inner. " DEFVAL { outer-vlantag } ::= { cmEthernetNetPortEntry 108 } cmEthernetNetPortDefaultCOS OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The COS assigned to a frame that does not have a valid COS identifier for the Priority Map Mode of the port. This attribute is only applicable on products when Flowpoint Model is supported. This value is assigned to a frame received on a port when: - the cmEthernetNetPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag; and the frame is untagged - the cmEthernetNetPortPrioMapMode=priomap-8021p, ingressCOSPriority=inner-vlantag; and the frame has a single VLAN tag - the cmEthernetNetPortPrioMapMode=priomap-8021p, ingressCOSPriority=outer-vlantag; and the frame is untagged - the cmEthernetNetPortPrioMapMode=priomap-dscp; and the frame does not have an IP ethertype - the cmEthernetNetPortPrioMapMode=priomap-tos; and the frame does not have an IP ethertype. This attribute has been deprecated and is not supported. The Default COS is determined from the flowpoint's associated Priority Mapping Profle." DEFVAL { 0 } ::= { cmEthernetNetPortEntry 109 } cmEthernetNetPortTrafficModel OBJECT-TYPE SYNTAX EthernetPortTrafficModel MAX-ACCESS read-write STATUS current DESCRIPTION "The Traffic Management connection model available for the port. - accessFlow: NID Traffic Connection model. - flowpoint: Multipoint and Aggregation Traffic Connection model." DEFVAL { accessFlow } ::= { cmEthernetNetPortEntry 110 } cmEthernetNetPortIndependentShaperBW OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the shaper BW whether independent." ::= { cmEthernetNetPortEntry 111 } cmEthernetNetPortExpDEEncType OBJECT-TYPE SYNTAX PcpDEEncType MAX-ACCESS read-write STATUS current DESCRIPTION "This is a port level control that specifies the mode of drop eligibility encoding in exp bits of the VLAN tag." ::= { cmEthernetNetPortEntry 112 } cmEthernetNetPortExpDEPairsAction OBJECT-TYPE SYNTAX PcpDEPairsAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetNetPortExpDEEncType is of type 7p1d, 6p2d, 5p3d, the cmNetPortExpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility." ::= { cmEthernetNetPortEntry 113 } cmEthernetNetPortIpPrecDEEncType OBJECT-TYPE SYNTAX PcpDEEncType MAX-ACCESS read-write STATUS current DESCRIPTION "This is a port level control that specifies the mode of drop eligibility encoding in Ip Prec bits of the VLAN tag." ::= { cmEthernetNetPortEntry 114 } cmEthernetNetPortIpPrecDEPairsAction OBJECT-TYPE SYNTAX PcpDEPairsAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the SNMP user to manage the Ip Prec Drop Eligibility Pairs. When the cmEthernetNetPortIpPrecDEEncType is of type 7p1d, 6p2d, 5p3d, the cmNetPortIpPrecDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility." ::= { cmEthernetNetPortEntry 115 } cmEthernetNetPortEncapPcpDEEncodingType OBJECT-TYPE SYNTAX PcpDEEncType MAX-ACCESS read-write STATUS current DESCRIPTION "This is a port level control the mode of drop eligibility encoding in PCP bits of the VLAN tag in encapsulation header." ::= { cmEthernetNetPortEntry 116 } cmEthernetNetPortEncapPcpDEPairsAction OBJECT-TYPE SYNTAX PcpDEPairsAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetNetPortEncapPcpDEEncodingType is of type 7p1d, 6p2d, 5p3d, the cmNetPortEncapPcpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility." ::= { cmEthernetNetPortEntry 117 } cmEthernetNetPortJdsuLoopbackSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object is applicable when there is jdsu l3 loopback." ::= { cmEthernetNetPortEntry 118 } cmEthernetNetPortWfqSegmentationCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify the wfq segmentation COS value." ::= { cmEthernetNetPortEntry 119 } cmEthernetNetPortWfqGroupCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify the wfq group COS value." ::= { cmEthernetNetPortEntry 120 } cmEthernetNetPortWfqGroupEirLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify the wfq group eir low 32 bits value." ::= { cmEthernetNetPortEntry 121 } cmEthernetNetPortWfqGroupEirHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify the wfq group eir high 32 bits value." ::= { cmEthernetNetPortEntry 122 } cmEthernetNetPortSilentStartControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allows enabling/disabling of silent start." ::= { cmEthernetNetPortEntry 123 } cmEthernetNetPortSfpLinkLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP Link Length. This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp." ::= { cmEthernetNetPortEntry 124 } cmEthernetNetPortOuterTagTpidOverride OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows enabling/disabling of Outer Tag TPID override. When enabled, values in Outer Tag TPID is applicable on egress Ethernet Network Port." ::= { cmEthernetNetPortEntry 125 } cmEthernetNetPortOuterTagTpid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the egress Outer Tag TPID on the Ethernet Network Port." ::= { cmEthernetNetPortEntry 126 } -- Ethernet Port SFP params cmEthernetNetPortSfpName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the official name of the SFP." ::= { cmEthernetNetPortEntry 127 } cmEthernetNetPortSfpHardwareRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the hardware revision of the SFP." ::= { cmEthernetNetPortEntry 128 } cmEthernetNetPortPersistentLoopbackControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows enabling/disabling of Persistent Loopback Control. The loopback configuration parameters do not survive restart as typically maintenance actions are not persist. Setting this attribute to true shall persist the loopback configuration parameters. When it is set to false the loopback configuration parameters shall not survive a restart." ::= { cmEthernetNetPortEntry 129 } cmEthernetNetPortLoopbackTestReflectorIPv4AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Control that enables/disables Test Reflector IPv4 Address to be used for Test Reflector IP Interface." ::= { cmEthernetNetPortEntry 130 } cmEthernetNetPortLoopbackTestReflectorIPv4Address OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This is the Test Reflector Interface IPv4 address." ::= { cmEthernetNetPortEntry 131 } cmEthernetNetPortLoopbackTestReflectorIPv6AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Control that enables/disables Test Reflector IPv6 Address to be used for Test Reflector IP Interface." ::= { cmEthernetNetPortEntry 132 } cmEthernetNetPortLoopbackTestReflectorIPv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This is the Test Reflector Interface IPv6 address." ::= { cmEthernetNetPortEntry 133 } -- Ethernet Port SFP params cmEthernetNetPortSfpIdentifierValue OBJECT-TYPE SYNTAX SfpIdentifierValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP identifier value." ::= { cmEthernetNetPortEntry 134 } -- -- Ethernet Network Port Control Protocol Disposition -- cmEthernetNetPortCpdTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetNetPortCpdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Network Port Control Protocol Disposition. This table is only applicable for FSP150CM Hub Shelf Release 3.x." ::= { cmFacilityObjects 8 } cmEthernetNetPortCpdEntry OBJECT-TYPE SYNTAX CmEthernetNetPortCpdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetNetPortCpdTable. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Network Port." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex, cmEthernetNetPortCpdIndex } ::= { cmEthernetNetPortCpdTable 1 } CmEthernetNetPortCpdEntry ::= SEQUENCE { -- Index cmEthernetNetPortCpdIndex Integer32, -- CPD Filter Params cmEthernetNetPortCpdFilterType CmControlProtocolFilterType, cmEthernetNetPortCpdFilterDescr DisplayString, cmEthernetNetPortCpdDispType CmControlProtocolDispType, cmEthernetNetPortCpdMacAddressMatch MacAddress, cmEthernetNetPortCpdMacAddressMask MacAddress, cmEthernetNetPortCpdEthertype Integer32, cmEthernetNetPortCpdEthertypeMask Integer32, cmEthernetNetPortCpdSubtype Integer32, cmEthernetNetPortCpdSubtypeMask Integer32 } cmEthernetNetPortCpdIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this CPD Service Entry." ::= { cmEthernetNetPortCpdEntry 1 } cmEthernetNetPortCpdFilterType OBJECT-TYPE SYNTAX CmControlProtocolFilterType MAX-ACCESS read-only STATUS current DESCRIPTION "This enables specification of type of CPD Filter." ::= { cmEthernetNetPortCpdEntry 2 } cmEthernetNetPortCpdFilterDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This provides description of CPD Filter." ::= { cmEthernetNetPortCpdEntry 3 } cmEthernetNetPortCpdDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "This enables specification of disposion type of CPD Filter." ::= { cmEthernetNetPortCpdEntry 4 } cmEthernetNetPortCpdMacAddressMatch OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This enables provides the Filter MAC Address to match." ::= { cmEthernetNetPortCpdEntry 5 } cmEthernetNetPortCpdMacAddressMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This enables provides the Filter MAC Address Mask to match." ::= { cmEthernetNetPortCpdEntry 6 } cmEthernetNetPortCpdEthertype OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This enables provides the Filter Ethertype to match." ::= { cmEthernetNetPortCpdEntry 7 } cmEthernetNetPortCpdEthertypeMask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This enables provides the Filter Ethertype Mask to match." ::= { cmEthernetNetPortCpdEntry 8 } cmEthernetNetPortCpdSubtype OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This enables provides the Filter Subtype to match." ::= { cmEthernetNetPortCpdEntry 9 } cmEthernetNetPortCpdSubtypeMask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This enables provides the Filter Subtype Mask to match." ::= { cmEthernetNetPortCpdEntry 10 } -- -- Ethernet Management Port -- cmEthernetMgmtPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetMgmtPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Management Port Facilities for configuration purposes." ::= { cmFacilityObjects 9 } cmEthernetMgmtPortEntry OBJECT-TYPE SYNTAX CmEthernetMgmtPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetMgmtPortTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetMgmtPortIndex } ::= { cmEthernetMgmtPortTable 1 } CmEthernetMgmtPortEntry ::= SEQUENCE { -- Port Indices cmEthernetMgmtPortIndex Integer32, cmEthernetMgmtPortEntityIndex PhysicalIndex, -- State Management params cmEthernetMgmtPortAdminState AdminState, cmEthernetMgmtPortOperationalState OperationalState, cmEthernetMgmtPortSecondaryState SecondaryState, -- Generic Port params cmEthernetMgmtPortMTU Integer32, -- Generic Ethernet Port params cmEthernetMgmtPortConfigSpeed EthernetPortSpeed, cmEthernetMgmtPortNegotiatedSpeed EthernetPortSpeed, cmEthernetMgmtPortMDIXType CmEthernetMDIXType, --New objects available with FSP150CC GE206 device (Release 4.1CC) cmEthernetMgmtPortMDIXStatus CmEthernetMDIXType, cmEthernetMgmtPortMediaType EthernetMediaType } -- Port Indices cmEthernetMgmtPortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this Ethernet Management Port within a card. Note that each Ethernet Management Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, cmEthernetMgmtPortIndex." ::= { cmEthernetMgmtPortEntry 1 } cmEthernetMgmtPortEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Entity Index from ENTITY-MIB for this port." ::= { cmEthernetMgmtPortEntry 2 } -- State Management params cmEthernetMgmtPortAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the Ethernet Management Port." ::= { cmEthernetMgmtPortEntry 3 } cmEthernetMgmtPortOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the Ethernet Management Port." ::= { cmEthernetMgmtPortEntry 4 } cmEthernetMgmtPortSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Ethernet Management Port." ::= { cmEthernetMgmtPortEntry 5 } -- Generic Port params cmEthernetMgmtPortMTU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the MTU on the Ethernet Management Port." ::= { cmEthernetMgmtPortEntry 6 } cmEthernetMgmtPortConfigSpeed OBJECT-TYPE SYNTAX EthernetPortSpeed MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to configure the speed of the Ethernet Management Port." ::= { cmEthernetMgmtPortEntry 7 } cmEthernetMgmtPortNegotiatedSpeed OBJECT-TYPE SYNTAX EthernetPortSpeed MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the negotiated speed of the Ethernet Management Port." ::= { cmEthernetMgmtPortEntry 8 } cmEthernetMgmtPortMDIXType OBJECT-TYPE SYNTAX CmEthernetMDIXType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows management of MDIX property on Ethernet Management Port." ::= { cmEthernetMgmtPortEntry 9 } cmEthernetMgmtPortMDIXStatus OBJECT-TYPE SYNTAX CmEthernetMDIXType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the current MDIX status of the Ethernet Management port." ::= { cmEthernetMgmtPortEntry 10 } cmEthernetMgmtPortMediaType OBJECT-TYPE SYNTAX EthernetMediaType MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the type of Ethernet Media on the Ethernet Management Port." ::= { cmEthernetMgmtPortEntry 11 } --Priority Mapping cmPrioMapTable OBJECT-TYPE SYNTAX SEQUENCE OF CmPrioMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Priority Mappings in multi Class of Service (COS) mode. This table is applicable only when the Access Port is in connection-oriented evpl mode." ::= { cmFacilityObjects 10 } cmPrioMapEntry OBJECT-TYPE SYNTAX CmPrioMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmPrioMapTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetAccPortIndex, cmPrioMapIndex } ::= { cmPrioMapTable 1 } CmPrioMapEntry ::= SEQUENCE { cmPrioMapIndex Integer32, cmPrioMapInPriority Integer32, cmPrioMapXTagControl PrioMapControlType, cmPrioMapXTagPriority VlanPriority, cmPrioMapCOS Integer32, cmPrioMapOuterTagPriority VlanPriority, cmPrioMapInnerTagPriority VlanPriority } cmPrioMapIndex OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "The integer index value corresponding to a priority value based on the cmEthernetAccPortPrioMapMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of DSCP, valid indices are 1 to 64." ::= { cmPrioMapEntry 1 } cmPrioMapInPriority OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The integer index value corresponding to a priority value based on the cmEthernetAccPortPrioMapMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of DSCP, valid indices are 0 to 63." ::= { cmPrioMapEntry 2 } cmPrioMapXTagControl OBJECT-TYPE SYNTAX PrioMapControlType MAX-ACCESS read-write STATUS current DESCRIPTION "This allows specification of whether the priority of incoming X-TAG should be swapped with cmPrioMapXTagPriority." ::= { cmPrioMapEntry 3 } cmPrioMapXTagPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This allows specification of the VLAN priority that will replace the incoming X-TAG's priority. This is applicable with cmPrioMapXTagControl as 'swap'." ::= { cmPrioMapEntry 4 } cmPrioMapCOS OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow." ::= { cmPrioMapEntry 5 } cmPrioMapOuterTagPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This allows specification of the VLAN priority that will replace the outgoing (A2N direction) outer-tag's priority. Note that, each flow participates or not in outer-tag priority mapping, using the object 'cmFlowOuterTagPrioEnabled'." ::= { cmPrioMapEntry 6 } cmPrioMapInnerTagPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This allows specification of the VLAN priority that will replace the outgoing (A2N direction) inner-tag's (i.e. second tag) priority. Note that, each flow participates or not in inner-tag priority mapping, using the object 'cmFlowInnerTagPrioEnabled'." ::= { cmPrioMapEntry 7 } --Flow Policer cmQosFlowPolicerTable OBJECT-TYPE SYNTAX SEQUENCE OF CmQosFlowPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Quality of Service Policer for configuration purposes." ::= { cmFacilityObjects 11 } cmQosFlowPolicerEntry OBJECT-TYPE SYNTAX CmQosFlowPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmQosFlowPolicerTable. These entries represent a Quality of Service Policer." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetAccPortIndex, cmFlowIndex, cmQosFlowPolicerTypeIndex, cmQosFlowPolicerIndex } ::= { cmQosFlowPolicerTable 1 } CmQosFlowPolicerEntry ::= SEQUENCE { cmQosFlowPolicerTypeIndex Integer32, cmQosFlowPolicerIndex Integer32, cmQosFlowPolicerDirection TrafficDirection, -- State Management params cmQosFlowPolicerAdminState AdminState, cmQosFlowPolicerOperationalState OperationalState, cmQosFlowPolicerSecondaryState SecondaryState, cmQosFlowPolicerCIRLo Unsigned32, cmQosFlowPolicerCIRHi Unsigned32, cmQosFlowPolicerEIRLo Unsigned32, cmQosFlowPolicerEIRHi Unsigned32, cmQosFlowPolicerCBS Integer32, cmQosFlowPolicerEBS Integer32, cmQosFlowPolicerAlgorithm PolicerAlgorithmType, cmQosFlowPolicerColorMode PolicerColorMode, cmQosFlowPolicerColorMarkingFlag TruthValue, cmQosFlowPolicerCouplingFlag TruthValue, cmQosFlowPolicerAssociatedShaper VariablePointer, cmQosFlowPolicerStorageType StorageType, cmQosFlowPolicerRowStatus RowStatus, cmQosFlowPolicerCIRMaxHi Unsigned32, cmQosFlowPolicerCIRMaxLo Unsigned32, cmQosFlowPolicerEIRMaxHi Unsigned32, cmQosFlowPolicerEIRMaxLo Unsigned32, cmQosFlowPolicerEnvelopeObject VariablePointer, cmQosFlowPolicerRank Integer32, cmQosFlowPolicerPolicingEnabled TruthValue } cmQosFlowPolicerTypeIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-create STATUS current DESCRIPTION "The unique index value corresponding to a Quality of Service Policer's direction. Values 1 and 2 are applicable to the Access Flow Policer - value of 1 stands for A2N direction, - value of 2 stands for N2A direction. Values 3 and 4 are applicable to Pass-thru Flow Policer (new in 5.6CC release): - value of 3 stands for N1toN2 direction - value of 4 stands for N2toN1 direction " ::= { cmQosFlowPolicerEntry 1 } cmQosFlowPolicerIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-create STATUS current DESCRIPTION "The Policer Index that represents the COS level. This is applicable in case of a Multi COS flow. Index 1 represents COS 0; Index 2 represents COS 1 and so on. In release 5.6CC the range is extended to 1..16 to support duplicate N2A policers on a Flow. The duplicate policers are created under a Flow if network interface of the Flow is ERP Group or Split Horizon Group. In case of multi-cos Flow indices 1..8 represent policers of COS 0..7 going from Network 1 port; indices 9..16 represent policers for COS 0..7 going from Network 2 port. In case of single-cos Flow index 1 represents policer going from Network 1 port; index 9 represents policer going from Network 2 port. " ::= { cmQosFlowPolicerEntry 2 } cmQosFlowPolicerDirection OBJECT-TYPE SYNTAX TrafficDirection MAX-ACCESS read-create STATUS current DESCRIPTION "This object is allows specification of Policer direction as 'a2n' or 'n2a'." ::= { cmQosFlowPolicerEntry 3 } -- State Management params cmQosFlowPolicerAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the QOS Flow Policer." ::= { cmQosFlowPolicerEntry 4 } cmQosFlowPolicerOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the QOS Flow Policer." ::= { cmQosFlowPolicerEntry 5 } cmQosFlowPolicerSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the QOS Flow Policer." ::= { cmQosFlowPolicerEntry 6 } cmQosFlowPolicerCIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the lower 32 bits of the CIR." ::= { cmQosFlowPolicerEntry 7 } cmQosFlowPolicerCIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the upper 32 bits of the CIR." ::= { cmQosFlowPolicerEntry 8 } cmQosFlowPolicerEIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the lower 32 bits of the EIR." ::= { cmQosFlowPolicerEntry 9 } cmQosFlowPolicerEIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the upper 32 bits of the EIR." ::= { cmQosFlowPolicerEntry 10 } cmQosFlowPolicerCBS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Commited Burst Size (CBS) on Policer." ::= { cmQosFlowPolicerEntry 11 } cmQosFlowPolicerEBS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Excess Burst Size (EBS) on the Policer." ::= { cmQosFlowPolicerEntry 12 } cmQosFlowPolicerAlgorithm OBJECT-TYPE SYNTAX PolicerAlgorithmType MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows specification of Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking)." ::= { cmQosFlowPolicerEntry 13 } cmQosFlowPolicerColorMode OBJECT-TYPE SYNTAX PolicerColorMode MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'." ::= { cmQosFlowPolicerEntry 14 } cmQosFlowPolicerColorMarkingFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object allows specification of Policer Color Marking Flag. The policer will set/clear the DEI (Drop Eligibility Indication) bit of the frame on an S-TAG if this flag is enabled. This object is not supported - setting any value will not have effect on the System." ::= { cmQosFlowPolicerEntry 15 } cmQosFlowPolicerCouplingFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level." ::= { cmQosFlowPolicerEntry 16 } cmQosFlowPolicerAssociatedShaper OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the QOS Shaper associated with this Policer. Multiple Policers can map to single Shaper. The corresponding row with the specified QOS value must exist in cmQosShaperTable when this value is specified." ::= { cmQosFlowPolicerEntry 17 } cmQosFlowPolicerStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmQosFlowPolicerEntry 18 } cmQosFlowPolicerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosFlowPolicerRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosFlowPolicerRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosFlowPolicerRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmQosFlowPolicerEntry 19 } cmQosFlowPolicerCIRMaxHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the high 32 bits." ::= { cmQosFlowPolicerEntry 20 } cmQosFlowPolicerCIRMaxLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the lower 32 bits." ::= { cmQosFlowPolicerEntry 21 } cmQosFlowPolicerEIRMaxHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the high 32 bits." ::= { cmQosFlowPolicerEntry 22 } cmQosFlowPolicerEIRMaxLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the lower 32 bits." ::= { cmQosFlowPolicerEntry 23 } cmQosFlowPolicerEnvelopeObject OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of envelope object." ::= { cmQosFlowPolicerEntry 24 } cmQosFlowPolicerRank OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of rank value." ::= { cmQosFlowPolicerEntry 25 } cmQosFlowPolicerPolicingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes whether the policing is enabled." ::= { cmQosFlowPolicerEntry 26 } -- -- Ethernet Access Port Quality of Service Shaper -- cmAccPortQosShaperTable OBJECT-TYPE SYNTAX SEQUENCE OF CmAccPortQosShaperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Access Port Quality of Service Shaper for configuration purposes. These shapers can be managed when the Access Port is in evpl mode and are relevant for traffic in the network to access direction." ::= { cmFacilityObjects 12 } cmAccPortQosShaperEntry OBJECT-TYPE SYNTAX CmAccPortQosShaperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmAccPortQosShaperTable. These entries represent a Quality of Service Shaper." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetAccPortIndex, cmAccPortQosShaperIndex } ::= { cmAccPortQosShaperTable 1 } CmAccPortQosShaperEntry ::= SEQUENCE { -- QOS Shaper Index/Id cmAccPortQosShaperIndex Integer32, cmAccPortQosShaperDirection TrafficDirection, -- State Management params cmAccPortQosShaperAdminState AdminState, cmAccPortQosShaperOperationalState OperationalState, cmAccPortQosShaperSecondaryState SecondaryState, -- QOS Shaper Properties cmAccPortQosShaperCIRLo Unsigned32, cmAccPortQosShaperCIRHi Unsigned32, cmAccPortQosShaperEIRLo Unsigned32, cmAccPortQosShaperEIRHi Unsigned32, cmAccPortQosShaperCBS Unsigned32, cmAccPortQosShaperEBS Unsigned32, cmAccPortQosShaperBufferSize Unsigned32, cmAccPortQosShaperCOS Integer32, cmAccPortQosShaperSoamCIRLo Unsigned32, cmAccPortQosShaperSoamCIRHi Unsigned32, cmAccPortQosShaperSoamEIRLo Unsigned32, cmAccPortQosShaperSoamEIRHi Unsigned32, --wred threshold cmAccPortQosShaperWredGreenMinQueueThreshold Unsigned32, cmAccPortQosShaperWredGreenMaxQueueThreshold Unsigned32, cmAccPortQosShaperWredGreenDropProbability Unsigned32, cmAccPortQosShaperWredYellowMinQueueThreshold Unsigned32, cmAccPortQosShaperWredYellowMaxQueueThreshold Unsigned32, cmAccPortQosShaperWredYellowDropProbability Unsigned32, cmAccPortQosShaperAvgFrameSizeBeforeFragment Integer32, cmAccPortQosShaperWfqWeight Integer32 } cmAccPortQosShaperIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The unique integer index value corresponding to a Quality of Service Shaper." ::= { cmAccPortQosShaperEntry 1 } cmAccPortQosShaperDirection OBJECT-TYPE SYNTAX TrafficDirection MAX-ACCESS read-only STATUS current DESCRIPTION "The direction of the Quality of Service Shaper." ::= { cmAccPortQosShaperEntry 2 } -- State Management params cmAccPortQosShaperAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the QOS Shaper." ::= { cmAccPortQosShaperEntry 3 } cmAccPortQosShaperOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the QOS Shaper." ::= { cmAccPortQosShaperEntry 4 } cmAccPortQosShaperSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the QOS Shaper." ::= { cmAccPortQosShaperEntry 5 } cmAccPortQosShaperCIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Information Rate(CIR) (Lower 32 bits)of a Shaper." ::= { cmAccPortQosShaperEntry 6 } cmAccPortQosShaperCIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Information Rate(CIR) (Higher 32 bits) of a Shaper." ::= { cmAccPortQosShaperEntry 7 } cmAccPortQosShaperEIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper." ::= { cmAccPortQosShaperEntry 8 } cmAccPortQosShaperEIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper." ::= { cmAccPortQosShaperEntry 9 } cmAccPortQosShaperCBS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Burst Size (CBS) of the Shaper." ::= { cmAccPortQosShaperEntry 10 } cmAccPortQosShaperEBS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Burst Size (EBS) of the Shaper." ::= { cmAccPortQosShaperEntry 11 } cmAccPortQosShaperBufferSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Buffer Size of the Shaper." ::= { cmAccPortQosShaperEntry 12 } cmAccPortQosShaperCOS OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the COS (Class of Service) value for the QOS Shaper." ::= { cmAccPortQosShaperEntry 13 } cmAccPortQosShaperSoamCIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Soam Commited Information Rate(SOAM-CIR) (Lower 32 bits)of a Shaper." ::= { cmAccPortQosShaperEntry 14 } cmAccPortQosShaperSoamCIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Soam Commited Information Rate(SOAM-CIR) (Higher 32 bits) of a Shaper." ::= { cmAccPortQosShaperEntry 15 } cmAccPortQosShaperSoamEIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper." ::= { cmAccPortQosShaperEntry 16 } cmAccPortQosShaperSoamEIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper." ::= { cmAccPortQosShaperEntry 17 } cmAccPortQosShaperWredGreenMinQueueThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred green packet min queue threshold value." ::= { cmAccPortQosShaperEntry 18 } cmAccPortQosShaperWredGreenMaxQueueThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred green packet max queue threshold value." ::= { cmAccPortQosShaperEntry 19 } cmAccPortQosShaperWredGreenDropProbability OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred green packet drop probability." ::= { cmAccPortQosShaperEntry 20 } cmAccPortQosShaperWredYellowMinQueueThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred yellow packet min queue threshold value." ::= { cmAccPortQosShaperEntry 21 } cmAccPortQosShaperWredYellowMaxQueueThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred yellow packet max queue threshold value." ::= { cmAccPortQosShaperEntry 22 } cmAccPortQosShaperWredYellowDropProbability OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred yellow packet drop probability." ::= { cmAccPortQosShaperEntry 23 } cmAccPortQosShaperAvgFrameSizeBeforeFragment OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the average frame size before fragmentation." ::= { cmAccPortQosShaperEntry 24 } cmAccPortQosShaperWfqWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the wfq weight value." ::= { cmAccPortQosShaperEntry 25 } -- -- -- Ethernet Access Port Control Protocol Disposition V2 -- cmEthernetAccPortCpdV2Table OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetAccPortCpdV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Access Port Control Protocol Disposition (CPD) V2. This support of CPD is provided on the GE206/GE201 device." ::= { cmFacilityObjects 13 } cmEthernetAccPortCpdV2Entry OBJECT-TYPE SYNTAX CmEthernetAccPortCpdV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetAccPortCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Access Port." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetAccPortIndex, cmEthernetAccPortCpdV2Index } ::= { cmEthernetAccPortCpdV2Table 1 } CmEthernetAccPortCpdV2Entry ::= SEQUENCE { -- Index cmEthernetAccPortCpdV2Index Integer32, -- Filtering Criteria cmEthernetAccPortCpdV2CiscoGroupDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2IslDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2PagpDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2UdldDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2CdpDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2VtpDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2DtpDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2PvstpPlusDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2UplinkFastDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2VlanBridgeDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2L2PTDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2BridgeGroupDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2BPDUDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2PauseDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2LACPDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2LACPMarkerDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2EfmOamDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2SSMDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2PortAuthenDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2BridgeReservedDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2LANBridgesDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2GARPGroupDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2GMRPDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2GVRPDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2GARPDispType CmControlProtocolDispType, -- cmEthernetAccPortCpdV2LLDPDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2ELMIDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2L2PTTunnelMac MacAddress, -- cmEthernetAccPortCpdV2Mac00DispType CmControlProtocolDispType, cmEthernetAccPortCpdV2Mac01DispType CmControlProtocolDispType, cmEthernetAccPortCpdV2Mac02DispType CmControlProtocolDispType, cmEthernetAccPortCpdV2Mac03DispType CmControlProtocolDispType, cmEthernetAccPortCpdV2Mac04DispType CmControlProtocolDispType, cmEthernetAccPortCpdV2Mac05DispType CmControlProtocolDispType, cmEthernetAccPortCpdV2Mac06DispType CmControlProtocolDispType, cmEthernetAccPortCpdV2Mac07DispType CmControlProtocolDispType, cmEthernetAccPortCpdV2Mac08DispType CmControlProtocolDispType, cmEthernetAccPortCpdV2Mac09DispType CmControlProtocolDispType, cmEthernetAccPortCpdV2Mac0ADispType CmControlProtocolDispType, cmEthernetAccPortCpdV2Mac0BDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2Mac0CDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2Mac0DDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2Mac0EDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2Mac0FDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2NearestLLDPDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2NonTpmrLLDPDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2CustomerLLDPDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2PtpUntaggedDispType CmControlProtocolDispType, cmEthernetAccPortCpdV2PtpTaggedDispType CmControlProtocolDispType } cmEthernetAccPortCpdV2Index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unique Index value to access the CPD row." ::= { cmEthernetAccPortCpdV2Entry 1 } cmEthernetAccPortCpdV2CiscoGroupDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting." ::= { cmEthernetAccPortCpdV2Entry 2 } cmEthernetAccPortCpdV2IslDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00)." ::= { cmEthernetAccPortCpdV2Entry 3 } cmEthernetAccPortCpdV2PagpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104)." ::= { cmEthernetAccPortCpdV2Entry 4 } cmEthernetAccPortCpdV2UdldDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111)." ::= { cmEthernetAccPortCpdV2Entry 5 } cmEthernetAccPortCpdV2CdpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000)." ::= { cmEthernetAccPortCpdV2Entry 6 } cmEthernetAccPortCpdV2VtpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003)." ::= { cmEthernetAccPortCpdV2Entry 7 } cmEthernetAccPortCpdV2DtpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004)." ::= { cmEthernetAccPortCpdV2Entry 8 } cmEthernetAccPortCpdV2PvstpPlusDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B)." ::= { cmEthernetAccPortCpdV2Entry 9 } cmEthernetAccPortCpdV2UplinkFastDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A)." ::= { cmEthernetAccPortCpdV2Entry 10 } cmEthernetAccPortCpdV2VlanBridgeDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C)." ::= { cmEthernetAccPortCpdV2Entry 11 } cmEthernetAccPortCpdV2L2PTDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0)." ::= { cmEthernetAccPortCpdV2Entry 12 } cmEthernetAccPortCpdV2BridgeGroupDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F." ::= { cmEthernetAccPortCpdV2Entry 13 } cmEthernetAccPortCpdV2BPDUDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00)." ::= { cmEthernetAccPortCpdV2Entry 14 } cmEthernetAccPortCpdV2PauseDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames)." ::= { cmEthernetAccPortCpdV2Entry 15 } cmEthernetAccPortCpdV2LACPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01)." ::= { cmEthernetAccPortCpdV2Entry 16 } cmEthernetAccPortCpdV2LACPMarkerDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02)." ::= { cmEthernetAccPortCpdV2Entry 17 } cmEthernetAccPortCpdV2EfmOamDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03)." ::= { cmEthernetAccPortCpdV2Entry 18 } cmEthernetAccPortCpdV2SSMDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A)." ::= { cmEthernetAccPortCpdV2Entry 19 } cmEthernetAccPortCpdV2PortAuthenDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E)." ::= { cmEthernetAccPortCpdV2Entry 20 } cmEthernetAccPortCpdV2BridgeReservedDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F." ::= { cmEthernetAccPortCpdV2Entry 21 } cmEthernetAccPortCpdV2LANBridgesDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10)." ::= { cmEthernetAccPortCpdV2Entry 22 } cmEthernetAccPortCpdV2GARPGroupDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F." ::= { cmEthernetAccPortCpdV2Entry 23 } cmEthernetAccPortCpdV2GMRPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20)." ::= { cmEthernetAccPortCpdV2Entry 24 } cmEthernetAccPortCpdV2GVRPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21)." ::= { cmEthernetAccPortCpdV2Entry 25 } cmEthernetAccPortCpdV2GARPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F." ::= { cmEthernetAccPortCpdV2Entry 26 } cmEthernetAccPortCpdV2LLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - each LLDP MAC protocol has its own disposition. LLDP (Link Layer Discovery Protocol) Disposition type. MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or 01:80:C2:00:00:00." ::= { cmEthernetAccPortCpdV2Entry 27 } cmEthernetAccPortCpdV2ELMIDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE." ::= { cmEthernetAccPortCpdV2Entry 28 } cmEthernetAccPortCpdV2L2PTTunnelMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Configurable Layer 2 Protocol Tunneling MAC Address. For protocols STP, CDP and VTP, with control protocol disposition as pass-thru-l2pt, this configured MAC address replaces the DA, upon encapsulation. For decapsulation, protocol signature and this configured MAC address are matched and the MAC address is replaced with the protocol's inferred MAC address." ::= { cmEthernetAccPortCpdV2Entry 29 } cmEthernetAccPortCpdV2Mac00DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:00 Disposition type." ::= { cmEthernetAccPortCpdV2Entry 30 } cmEthernetAccPortCpdV2Mac01DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:01 Disposition type." ::= { cmEthernetAccPortCpdV2Entry 31 } cmEthernetAccPortCpdV2Mac02DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:02 Disposition type." ::= { cmEthernetAccPortCpdV2Entry 32 } cmEthernetAccPortCpdV2Mac03DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:03 Disposition type." ::= { cmEthernetAccPortCpdV2Entry 33 } cmEthernetAccPortCpdV2Mac04DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:04 Disposition type." ::= { cmEthernetAccPortCpdV2Entry 34 } cmEthernetAccPortCpdV2Mac05DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:05 Disposition type." ::= { cmEthernetAccPortCpdV2Entry 35 } cmEthernetAccPortCpdV2Mac06DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:06 Disposition type." ::= { cmEthernetAccPortCpdV2Entry 36 } cmEthernetAccPortCpdV2Mac07DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:07 Disposition type." ::= { cmEthernetAccPortCpdV2Entry 37 } cmEthernetAccPortCpdV2Mac08DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:08 Disposition type." ::= { cmEthernetAccPortCpdV2Entry 38 } cmEthernetAccPortCpdV2Mac09DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:09 Disposition type." ::= { cmEthernetAccPortCpdV2Entry 39 } cmEthernetAccPortCpdV2Mac0ADispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0A Disposition type." ::= { cmEthernetAccPortCpdV2Entry 40 } cmEthernetAccPortCpdV2Mac0BDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0B Disposition type." ::= { cmEthernetAccPortCpdV2Entry 41 } cmEthernetAccPortCpdV2Mac0CDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0C Disposition type." ::= { cmEthernetAccPortCpdV2Entry 42 } cmEthernetAccPortCpdV2Mac0DDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0D Disposition type." ::= { cmEthernetAccPortCpdV2Entry 43 } cmEthernetAccPortCpdV2Mac0EDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0E Disposition type." ::= { cmEthernetAccPortCpdV2Entry 44 } cmEthernetAccPortCpdV2Mac0FDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0F Disposition type." ::= { cmEthernetAccPortCpdV2Entry 45 } cmEthernetAccPortCpdV2NearestLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type." ::= { cmEthernetAccPortCpdV2Entry 46 } cmEthernetAccPortCpdV2NonTpmrLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type." ::= { cmEthernetAccPortCpdV2Entry 47 } cmEthernetAccPortCpdV2CustomerLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type." ::= { cmEthernetAccPortCpdV2Entry 48 } cmEthernetAccPortCpdV2PtpUntaggedDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "PTP untagged frame Disposition type." ::= { cmEthernetAccPortCpdV2Entry 49 } cmEthernetAccPortCpdV2PtpTaggedDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "PTP tagged frame Disposition type." ::= { cmEthernetAccPortCpdV2Entry 50 } --Flow CPDv2 cmFlowCpdV2Table OBJECT-TYPE SYNTAX SEQUENCE OF CmFlowCpdV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Flow Control Protocol Disposition V2. This table is supported for the GE206/GE201 devices." ::= { cmFacilityObjects 14 } cmFlowCpdV2Entry OBJECT-TYPE SYNTAX CmFlowCpdV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmFlowCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Flow." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetAccPortIndex, cmFlowIndex, cmFlowCpdV2Index } ::= { cmFlowCpdV2Table 1 } CmFlowCpdV2Entry ::= SEQUENCE { -- Index cmFlowCpdV2Index Integer32, -- Filtering Criteria cmFlowCpdV2CiscoGroupDispType CmControlProtocolDispType, cmFlowCpdV2IslDispType CmControlProtocolDispType, cmFlowCpdV2PagpDispType CmControlProtocolDispType, cmFlowCpdV2UdldDispType CmControlProtocolDispType, cmFlowCpdV2CdpDispType CmControlProtocolDispType, cmFlowCpdV2VtpDispType CmControlProtocolDispType, cmFlowCpdV2DtpDispType CmControlProtocolDispType, cmFlowCpdV2PvstpPlusDispType CmControlProtocolDispType, cmFlowCpdV2UplinkFastDispType CmControlProtocolDispType, cmFlowCpdV2VlanBridgeDispType CmControlProtocolDispType, cmFlowCpdV2L2PTDispType CmControlProtocolDispType, cmFlowCpdV2BridgeGroupDispType CmControlProtocolDispType, cmFlowCpdV2BPDUDispType CmControlProtocolDispType, cmFlowCpdV2PauseDispType CmControlProtocolDispType, cmFlowCpdV2LACPDispType CmControlProtocolDispType, cmFlowCpdV2LACPMarkerDispType CmControlProtocolDispType, cmFlowCpdV2EfmOamDispType CmControlProtocolDispType, cmFlowCpdV2SSMDispType CmControlProtocolDispType, cmFlowCpdV2PortAuthenDispType CmControlProtocolDispType, cmFlowCpdV2BridgeReservedDispType CmControlProtocolDispType, cmFlowCpdV2LANBridgesDispType CmControlProtocolDispType, cmFlowCpdV2GARPGroupDispType CmControlProtocolDispType, cmFlowCpdV2GMRPDispType CmControlProtocolDispType, cmFlowCpdV2GVRPDispType CmControlProtocolDispType, cmFlowCpdV2GARPDispType CmControlProtocolDispType, cmFlowCpdV2ActiveControlProtocols CmActiveControlProtocolsType, -- cmFlowCpdV2LLDPDispType CmControlProtocolDispType, cmFlowCpdV2ELMIDispType CmControlProtocolDispType, -- cmFlowCpdV2Mac00DispType CmControlProtocolDispType, cmFlowCpdV2Mac01DispType CmControlProtocolDispType, cmFlowCpdV2Mac02DispType CmControlProtocolDispType, cmFlowCpdV2Mac03DispType CmControlProtocolDispType, cmFlowCpdV2Mac04DispType CmControlProtocolDispType, cmFlowCpdV2Mac05DispType CmControlProtocolDispType, cmFlowCpdV2Mac06DispType CmControlProtocolDispType, cmFlowCpdV2Mac07DispType CmControlProtocolDispType, cmFlowCpdV2Mac08DispType CmControlProtocolDispType, cmFlowCpdV2Mac09DispType CmControlProtocolDispType, cmFlowCpdV2Mac0ADispType CmControlProtocolDispType, cmFlowCpdV2Mac0BDispType CmControlProtocolDispType, cmFlowCpdV2Mac0CDispType CmControlProtocolDispType, cmFlowCpdV2Mac0DDispType CmControlProtocolDispType, cmFlowCpdV2Mac0EDispType CmControlProtocolDispType, cmFlowCpdV2Mac0FDispType CmControlProtocolDispType, cmFlowCpdV2NearestLLDPDispType CmControlProtocolDispType, cmFlowCpdV2NonTpmrLLDPDispType CmControlProtocolDispType, cmFlowCpdV2CustomerLLDPDispType CmControlProtocolDispType } cmFlowCpdV2Index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unique Index value to access the CPD row." ::= { cmFlowCpdV2Entry 1 } cmFlowCpdV2CiscoGroupDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting." ::= { cmFlowCpdV2Entry 2 } cmFlowCpdV2IslDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00)." ::= { cmFlowCpdV2Entry 3 } cmFlowCpdV2PagpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104)." ::= { cmFlowCpdV2Entry 4 } cmFlowCpdV2UdldDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111)." ::= { cmFlowCpdV2Entry 5 } cmFlowCpdV2CdpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000)." ::= { cmFlowCpdV2Entry 6 } cmFlowCpdV2VtpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003)." ::= { cmFlowCpdV2Entry 7 } cmFlowCpdV2DtpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004)." ::= { cmFlowCpdV2Entry 8 } cmFlowCpdV2PvstpPlusDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B)." ::= { cmFlowCpdV2Entry 9 } cmFlowCpdV2UplinkFastDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A)." ::= { cmFlowCpdV2Entry 10 } cmFlowCpdV2VlanBridgeDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C)." ::= { cmFlowCpdV2Entry 11 } cmFlowCpdV2L2PTDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0)." ::= { cmFlowCpdV2Entry 12 } cmFlowCpdV2BridgeGroupDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F." ::= { cmFlowCpdV2Entry 13 } cmFlowCpdV2BPDUDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00)." ::= { cmFlowCpdV2Entry 14 } cmFlowCpdV2PauseDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames)." ::= { cmFlowCpdV2Entry 15 } cmFlowCpdV2LACPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01)." ::= { cmFlowCpdV2Entry 16 } cmFlowCpdV2LACPMarkerDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02)." ::= { cmFlowCpdV2Entry 17 } cmFlowCpdV2EfmOamDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03)." ::= { cmFlowCpdV2Entry 18 } cmFlowCpdV2SSMDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A)." ::= { cmFlowCpdV2Entry 19 } cmFlowCpdV2PortAuthenDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E)." ::= { cmFlowCpdV2Entry 20 } cmFlowCpdV2BridgeReservedDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F." ::= { cmFlowCpdV2Entry 21 } cmFlowCpdV2LANBridgesDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10)." ::= { cmFlowCpdV2Entry 22 } cmFlowCpdV2GARPGroupDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F." ::= { cmFlowCpdV2Entry 23 } cmFlowCpdV2GMRPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20)." ::= { cmFlowCpdV2Entry 24 } cmFlowCpdV2GVRPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21)." ::= { cmFlowCpdV2Entry 25 } cmFlowCpdV2GARPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F." ::= { cmFlowCpdV2Entry 26 } cmFlowCpdV2ActiveControlProtocols OBJECT-TYPE SYNTAX CmActiveControlProtocolsType MAX-ACCESS read-only STATUS current DESCRIPTION "List of Active Control Protocol Dispositions. Note that if the Port Level Disposition control is set to PEER or DISCARD, the flow level disposition is no longer active. This object provides information on all the active dispositions." ::= { cmFlowCpdV2Entry 27 } cmFlowCpdV2LLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - each LLDP MAC protocol has its own disposition. LLDP (Link Layer Discovery Protocol) Disposition type. MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or 01:80:C2:00:00:00." ::= { cmFlowCpdV2Entry 28 } cmFlowCpdV2ELMIDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE." ::= { cmFlowCpdV2Entry 29 } cmFlowCpdV2Mac00DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:00 Disposition type." ::= { cmFlowCpdV2Entry 30 } cmFlowCpdV2Mac01DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:01 Disposition type." ::= { cmFlowCpdV2Entry 31 } cmFlowCpdV2Mac02DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:02 Disposition type." ::= { cmFlowCpdV2Entry 32 } cmFlowCpdV2Mac03DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:03 Disposition type." ::= { cmFlowCpdV2Entry 33 } cmFlowCpdV2Mac04DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:04 Disposition type." ::= { cmFlowCpdV2Entry 34 } cmFlowCpdV2Mac05DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:05 Disposition type." ::= { cmFlowCpdV2Entry 35 } cmFlowCpdV2Mac06DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:06 Disposition type." ::= { cmFlowCpdV2Entry 36 } cmFlowCpdV2Mac07DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:07 Disposition type." ::= { cmFlowCpdV2Entry 37 } cmFlowCpdV2Mac08DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:08 Disposition type." ::= { cmFlowCpdV2Entry 38 } cmFlowCpdV2Mac09DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:09 Disposition type." ::= { cmFlowCpdV2Entry 39 } cmFlowCpdV2Mac0ADispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0A Disposition type." ::= { cmFlowCpdV2Entry 40 } cmFlowCpdV2Mac0BDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0B Disposition type." ::= { cmFlowCpdV2Entry 41 } cmFlowCpdV2Mac0CDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0C Disposition type." ::= { cmFlowCpdV2Entry 42 } cmFlowCpdV2Mac0DDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0D Disposition type." ::= { cmFlowCpdV2Entry 43 } cmFlowCpdV2Mac0EDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0E Disposition type." ::= { cmFlowCpdV2Entry 44 } cmFlowCpdV2Mac0FDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0F Disposition type." ::= { cmFlowCpdV2Entry 45 } cmFlowCpdV2NearestLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type." ::= { cmFlowCpdV2Entry 46 } cmFlowCpdV2NonTpmrLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type." ::= { cmFlowCpdV2Entry 47 } cmFlowCpdV2CustomerLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type." ::= { cmFlowCpdV2Entry 48 } -- -- Ethernet Network Port Control Protocol Disposition V2 -- cmEthernetNetPortCpdV2Table OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetNetPortCpdV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Network Port Control Protocol Disposition V2. This table is supported for the GE206/GE201 devices." ::= { cmFacilityObjects 15 } cmEthernetNetPortCpdV2Entry OBJECT-TYPE SYNTAX CmEthernetNetPortCpdV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetNetPortCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Network Port." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex, cmEthernetNetPortCpdV2Index } ::= { cmEthernetNetPortCpdV2Table 1 } CmEthernetNetPortCpdV2Entry ::= SEQUENCE { -- Index cmEthernetNetPortCpdV2Index Integer32, -- Filtering Criteria cmEthernetNetPortCpdV2CiscoGroupDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2IslDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2PagpDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2UdldDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2CdpDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2VtpDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2DtpDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2PvstpPlusDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2UplinkFastDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2VlanBridgeDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2L2PTDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2BridgeGroupDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2BPDUDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2PauseDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2LACPDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2LACPMarkerDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2EfmOamDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2SSMDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2PortAuthenDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2BridgeReservedDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2LANBridgesDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2GARPGroupDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2GMRPDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2GVRPDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2GARPDispType CmControlProtocolDispType, -- cmEthernetNetPortCpdV2LLDPDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2ELMIDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2L2PTTunnelMac MacAddress, -- cmEthernetNetPortCpdV2Mac00DispType CmControlProtocolDispType, cmEthernetNetPortCpdV2Mac01DispType CmControlProtocolDispType, cmEthernetNetPortCpdV2Mac02DispType CmControlProtocolDispType, cmEthernetNetPortCpdV2Mac03DispType CmControlProtocolDispType, cmEthernetNetPortCpdV2Mac04DispType CmControlProtocolDispType, cmEthernetNetPortCpdV2Mac05DispType CmControlProtocolDispType, cmEthernetNetPortCpdV2Mac06DispType CmControlProtocolDispType, cmEthernetNetPortCpdV2Mac07DispType CmControlProtocolDispType, cmEthernetNetPortCpdV2Mac08DispType CmControlProtocolDispType, cmEthernetNetPortCpdV2Mac09DispType CmControlProtocolDispType, cmEthernetNetPortCpdV2Mac0ADispType CmControlProtocolDispType, cmEthernetNetPortCpdV2Mac0BDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2Mac0CDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2Mac0DDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2Mac0EDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2Mac0FDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2NearestLLDPDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2NonTpmrLLDPDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2CustomerLLDPDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2PtpUntaggedDispType CmControlProtocolDispType, cmEthernetNetPortCpdV2PtpTaggedDispType CmControlProtocolDispType } cmEthernetNetPortCpdV2Index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unique Index value to access the CPD row." ::= { cmEthernetNetPortCpdV2Entry 1 } cmEthernetNetPortCpdV2CiscoGroupDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting." ::= { cmEthernetNetPortCpdV2Entry 2 } cmEthernetNetPortCpdV2IslDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00)." ::= { cmEthernetNetPortCpdV2Entry 3 } cmEthernetNetPortCpdV2PagpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104)." ::= { cmEthernetNetPortCpdV2Entry 4 } cmEthernetNetPortCpdV2UdldDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111)." ::= { cmEthernetNetPortCpdV2Entry 5 } cmEthernetNetPortCpdV2CdpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000)." ::= { cmEthernetNetPortCpdV2Entry 6 } cmEthernetNetPortCpdV2VtpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003)." ::= { cmEthernetNetPortCpdV2Entry 7 } cmEthernetNetPortCpdV2DtpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004)." ::= { cmEthernetNetPortCpdV2Entry 8 } cmEthernetNetPortCpdV2PvstpPlusDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B)." ::= { cmEthernetNetPortCpdV2Entry 9 } cmEthernetNetPortCpdV2UplinkFastDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A)." ::= { cmEthernetNetPortCpdV2Entry 10 } cmEthernetNetPortCpdV2VlanBridgeDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C)." ::= { cmEthernetNetPortCpdV2Entry 11 } cmEthernetNetPortCpdV2L2PTDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0)." ::= { cmEthernetNetPortCpdV2Entry 12 } cmEthernetNetPortCpdV2BridgeGroupDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F." ::= { cmEthernetNetPortCpdV2Entry 13 } cmEthernetNetPortCpdV2BPDUDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00)." ::= { cmEthernetNetPortCpdV2Entry 14 } cmEthernetNetPortCpdV2PauseDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames)." ::= { cmEthernetNetPortCpdV2Entry 15 } cmEthernetNetPortCpdV2LACPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01)." ::= { cmEthernetNetPortCpdV2Entry 16 } cmEthernetNetPortCpdV2LACPMarkerDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02)." ::= { cmEthernetNetPortCpdV2Entry 17 } cmEthernetNetPortCpdV2EfmOamDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03)." ::= { cmEthernetNetPortCpdV2Entry 18 } cmEthernetNetPortCpdV2SSMDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A)." ::= { cmEthernetNetPortCpdV2Entry 19 } cmEthernetNetPortCpdV2PortAuthenDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E)." ::= { cmEthernetNetPortCpdV2Entry 20 } cmEthernetNetPortCpdV2BridgeReservedDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F." ::= { cmEthernetNetPortCpdV2Entry 21 } cmEthernetNetPortCpdV2LANBridgesDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10)." ::= { cmEthernetNetPortCpdV2Entry 22 } cmEthernetNetPortCpdV2GARPGroupDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F." ::= { cmEthernetNetPortCpdV2Entry 23 } cmEthernetNetPortCpdV2GMRPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20)." ::= { cmEthernetNetPortCpdV2Entry 24 } cmEthernetNetPortCpdV2GVRPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21)." ::= { cmEthernetNetPortCpdV2Entry 25 } cmEthernetNetPortCpdV2GARPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F." ::= { cmEthernetNetPortCpdV2Entry 26 } cmEthernetNetPortCpdV2LLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - each LLDP MAC protocol has its own disposition. LLDP (Link Layer Discovery Protocol) Disposition type. MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or 01:80:C2:00:00:00." ::= { cmEthernetNetPortCpdV2Entry 27 } cmEthernetNetPortCpdV2ELMIDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE." ::= { cmEthernetNetPortCpdV2Entry 28 } cmEthernetNetPortCpdV2L2PTTunnelMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Configurable Layer 2 Protocol Tunneling MAC Address. For protocols STP, CDP and VTP, with control protocol disposition as pass-thru-l2pt, this configured MAC address replaces the DA, upon encapsulation. For decapsulation, protocol signature and this configured MAC address are matched and the MAC address is replaced with the protocol's inferred MAC address." ::= { cmEthernetNetPortCpdV2Entry 29 } cmEthernetNetPortCpdV2Mac00DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:00 Disposition type." ::= { cmEthernetNetPortCpdV2Entry 30 } cmEthernetNetPortCpdV2Mac01DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:01 Disposition type." ::= { cmEthernetNetPortCpdV2Entry 31 } cmEthernetNetPortCpdV2Mac02DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:02 Disposition type." ::= { cmEthernetNetPortCpdV2Entry 32 } cmEthernetNetPortCpdV2Mac03DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:03 Disposition type." ::= { cmEthernetNetPortCpdV2Entry 33 } cmEthernetNetPortCpdV2Mac04DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:04 Disposition type." ::= { cmEthernetNetPortCpdV2Entry 34 } cmEthernetNetPortCpdV2Mac05DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:05 Disposition type." ::= { cmEthernetNetPortCpdV2Entry 35 } cmEthernetNetPortCpdV2Mac06DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:06 Disposition type." ::= { cmEthernetNetPortCpdV2Entry 36 } cmEthernetNetPortCpdV2Mac07DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:07 Disposition type." ::= { cmEthernetNetPortCpdV2Entry 37 } cmEthernetNetPortCpdV2Mac08DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:08 Disposition type." ::= { cmEthernetNetPortCpdV2Entry 38 } cmEthernetNetPortCpdV2Mac09DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:09 Disposition type." ::= { cmEthernetNetPortCpdV2Entry 39 } cmEthernetNetPortCpdV2Mac0ADispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0A Disposition type." ::= { cmEthernetNetPortCpdV2Entry 40 } cmEthernetNetPortCpdV2Mac0BDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0B Disposition type." ::= { cmEthernetNetPortCpdV2Entry 41 } cmEthernetNetPortCpdV2Mac0CDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0C Disposition type." ::= { cmEthernetNetPortCpdV2Entry 42 } cmEthernetNetPortCpdV2Mac0DDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0D Disposition type." ::= { cmEthernetNetPortCpdV2Entry 43 } cmEthernetNetPortCpdV2Mac0EDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0E Disposition type." ::= { cmEthernetNetPortCpdV2Entry 44 } cmEthernetNetPortCpdV2Mac0FDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0F Disposition type." ::= { cmEthernetNetPortCpdV2Entry 45 } cmEthernetNetPortCpdV2NearestLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type." ::= { cmEthernetNetPortCpdV2Entry 46 } cmEthernetNetPortCpdV2NonTpmrLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type." ::= { cmEthernetNetPortCpdV2Entry 47 } cmEthernetNetPortCpdV2CustomerLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type." ::= { cmEthernetNetPortCpdV2Entry 48 } cmEthernetNetPortCpdV2PtpUntaggedDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "PTP non forwarding untagged frame Disposition type." ::= { cmEthernetNetPortCpdV2Entry 49 } cmEthernetNetPortCpdV2PtpTaggedDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "PTP tagged frame Disposition type." ::= { cmEthernetNetPortCpdV2Entry 50 } -- -- BITS (Building Integrated Timing System) Port -- bitsPortTable OBJECT-TYPE SYNTAX SEQUENCE OF BitsPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to BITS Port Facilities for configuration purposes." ::= { cmFacilityObjects 16 } bitsPortEntry OBJECT-TYPE SYNTAX BitsPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the bitsPortTable." INDEX { neIndex, shelfIndex, slotIndex, bitsPortTypeIndex, bitsPortIndex } ::= { bitsPortTable 1 } BitsPortEntry ::= SEQUENCE { -- Port Indices bitsPortTypeIndex Integer32, bitsPortIndex Integer32, bitsPortIfIndex InterfaceIndex, bitsPortEntityIndex PhysicalIndex, -- State Management params bitsPortAdminState AdminState, bitsPortOperationalState OperationalState, bitsPortSecondaryState SecondaryState, -- bits port specific params bitsPortType BitsPortType, bitsPortLineType BitsPortLineType, bitsPortLineCode BitsPortLineCode, bitsPortFrameFormat BitsFrameFormat, bitsPortSaBitDesignation SaBitDesignation, --Synchronous Port params bitsPortQLModeEnabled TruthValue, bitsPortExpectedQL SSMQualityLevel, bitsPortAssumedQL SSMQualityLevel, bitsPortReceivedQL SSMQualityLevel, bitsPortTransmitQL SSMQualityLevel, bitsPortSquelchQL SSMQualityLevel, bitsPortLineBuildOut LineBuildOut, bitsPortImpedance BitsPortImpedanceMode, bitsPortCrc4 TruthValue, bitsPortIdleCode INTEGER, bitsPortAis TruthValue, bitsPortSaBitsAdminState SaBitsState, bitsPortSquelchControl SquelchControl, bitsPortSignalShape SignalShape, bitsPortSignalFrequency SignalFrequency } -- Port Indices bitsPortTypeIndex OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this BITS Port within the card. Value 1 stands for BITS-IN, 2 for BITS-OUT." ::= { bitsPortEntry 1 } bitsPortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this BITS Port within the card. Note that each BITs Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, bitsPortIndex." ::= { bitsPortEntry 2 } bitsPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the same value as ifIndex for Bits Port. An integer index value used to uniquely identify this Bits Port." ::= { bitsPortEntry 3 } bitsPortEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Entity Index from ENTITY-MIB for this port." ::= { bitsPortEntry 4 } -- State Management params bitsPortAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the BITS Port." ::= { bitsPortEntry 5 } bitsPortOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the BITS Port." ::= { bitsPortEntry 6 } bitsPortSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the BITS Port." ::= { bitsPortEntry 7 } bitsPortType OBJECT-TYPE SYNTAX BitsPortType MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the BITS Port Type." ::= { bitsPortEntry 8 } bitsPortLineType OBJECT-TYPE SYNTAX BitsPortLineType MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the BITS Port Line Type. Determines whether the T1/E1 BITS port operates in T1, E1, or 2048kHz mode." ::= { bitsPortEntry 9 } bitsPortLineCode OBJECT-TYPE SYNTAX BitsPortLineCode MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the BITS Port Line Code. When the port is configured for a Line Type of T1, the valid values are t1-b8zs and t1-ami and the default value is t1-b8zs. When the port is configured for a Line Type of E1, the valid values are e1-hdb3 and e1-ami and the default value is e1-hdb3. When the port is configured for a Line Type of 2048kHz, the value is none." ::= { bitsPortEntry 10 } bitsPortFrameFormat OBJECT-TYPE SYNTAX BitsFrameFormat MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the BITS Port Frame Format. When the port is configured for a Line Type of T1, the valid values are t1-sf and t1-esf and the default value is t1-esf. When the port is configured for a Line Type of E1, the valid values are e1-unframed, e1-crc4, and e1-dualFrame and the default value is e1-crc4. When the port is configured for a Line Type of 2048kHz, the value is none. R4.1CC and R4.3CC do not support e1-unframed." ::= { bitsPortEntry 11 } bitsPortSaBitDesignation OBJECT-TYPE SYNTAX SaBitDesignation MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the BITS Port Sa Bit Designation. Determines which E1 Sa Bit is used to transmit/receive the SSM. For T1 and 2048khz Line Types, the only allowed value is None. For E1 Line Type, the default value is bit4 and it can only have a value of None if QL Mode is disabled, otherwise, None is an invalid value." ::= { bitsPortEntry 12 } bitsPortQLModeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify whether the BITS Port can be enabled/disabled for QL Mode. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs." ::= { bitsPortEntry 13 } bitsPortExpectedQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the expected QL when the BITS Port is enabled for QL Mode. This object allows the user to set a minimum expected received Quality Level on the port. The default value shall be None." ::= { bitsPortEntry 14 } bitsPortAssumedQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the assumed QL on the BITS Port. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port's QL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference." ::= { bitsPortEntry 15 } bitsPortReceivedQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Received QL value for the BITS port. If the BITS port's QL Mode is disabled, then the received QL value is not applicable." ::= { bitsPortEntry 16 } bitsPortTransmitQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Transmitted QL value for the BITS port. If the BITS port's QL Mode is disabled, then the received QL value is not applicable." ::= { bitsPortEntry 17 } bitsPortSquelchQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set the Squelch QL for the BITS-OUT port. The Squelch QL is only meaningful if the QL Mode is Enabled. The Squelch QL is used to determine whether or not to squelch the output of the BITS-OUT port. If the system's QL is lower than the Squelch QL, the output is squelched. If the BITS port's QL Mode is disabled, then the received QL value is not applicable." ::= { bitsPortEntry 18 } bitsPortLineBuildOut OBJECT-TYPE SYNTAX LineBuildOut MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the line build out on the BITS-OUT port when the Line Type is T1." ::= { bitsPortEntry 19 } bitsPortImpedance OBJECT-TYPE SYNTAX BitsPortImpedanceMode MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the impedance mode for the BITS-OUT port." ::= { bitsPortEntry 20 } bitsPortCrc4 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to include or not the CRC to the signal of the BITS-OUT port." ::= { bitsPortEntry 21 } bitsPortIdleCode OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the Idle Code for the BITS-OUT port." ::= { bitsPortEntry 22 } bitsPortAis OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set the AIS signal for the BITS-OUT port." ::= { bitsPortEntry 23 } bitsPortSaBitsAdminState OBJECT-TYPE SYNTAX SaBitsState MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the five Sa Bit values, from bit4 to bit8, for the BITS-OUT port. The object value is a BIT string that concatenate the Sa Bit values. The Sa Bit values are applied to each of the five Sa Bits of the output signal except to the one that carries SSM information when QL Mode is enabled." ::= { bitsPortEntry 24 } bitsPortSquelchControl OBJECT-TYPE SYNTAX SquelchControl MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Squelch Control for the port. The Squelch Control determines the type of squelch control used to squelch an output of the port." ::= { bitsPortEntry 25 } bitsPortSignalShape OBJECT-TYPE SYNTAX SignalShape MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Port Signal Shape. Indicates whether the signal has a sine or a square shape." ::= { bitsPortEntry 26 } bitsPortSignalFrequency OBJECT-TYPE SYNTAX SignalFrequency MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the signal frequency of the port. Possible value are 100 kHz, 1 MHz, 1544 kHz, 2048 kHz, 5 MHz, 25 Mhz or 50 MHz. It can be set only to a port that is dedicated to yield a variety of frequencies." ::= { bitsPortEntry 27 } -- -- IEEE 1588 EthernetPort -- ieee1588EthernetPortTable OBJECT-TYPE SYNTAX SEQUENCE OF IEEE1588EthernetPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to IEEE Ethernet Port Facilities for configuration purposes." ::= { cmFacilityObjects 17 } ieee1588EthernetPortEntry OBJECT-TYPE SYNTAX IEEE1588EthernetPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the IEEE Ethernet Port Table." INDEX { neIndex, shelfIndex, slotIndex, ieee1588EthernetPortIndex } ::= { ieee1588EthernetPortTable 1 } IEEE1588EthernetPortEntry ::= SEQUENCE { -- Port Indices ieee1588EthernetPortIndex Integer32, ieee1588EthernetPortIfIndex InterfaceIndex, ieee1588EthernetPortEntityIndex PhysicalIndex, -- State Management params ieee1588EthernetPortAdminState AdminState, ieee1588EthernetPortOperationalState OperationalState, ieee1588EthernetPortSecondaryState SecondaryState, -- Port specific params ieee1588EthernetPortMTU Integer32, -- Generic Ethernet Port params ieee1588EthernetPortMediaType EthernetMediaType, ieee1588EthernetPortConfigSpeed EthernetPortSpeed, ieee1588EthernetPortNegotiatedSpeed EthernetPortSpeed, ieee1588EthernetPortMDIXType CmEthernetMDIXType } -- Port Indices ieee1588EthernetPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify the IEEE Ethernet Port." ::= { ieee1588EthernetPortEntry 1 } ieee1588EthernetPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the same value as ifIndex for the IEEE Ethernet Port." ::= { ieee1588EthernetPortEntry 2 } ieee1588EthernetPortEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Entity Index from ENTITY-MIB for this port." ::= { ieee1588EthernetPortEntry 3 } -- State Management params ieee1588EthernetPortAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the Port." ::= { ieee1588EthernetPortEntry 4 } ieee1588EthernetPortOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the Port." ::= { ieee1588EthernetPortEntry 5 } ieee1588EthernetPortSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Port." ::= { ieee1588EthernetPortEntry 6 } ieee1588EthernetPortMTU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the MTU on the Port." ::= { ieee1588EthernetPortEntry 7 } ieee1588EthernetPortMediaType OBJECT-TYPE SYNTAX EthernetMediaType MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the type of Media." ::= { ieee1588EthernetPortEntry 8 } ieee1588EthernetPortConfigSpeed OBJECT-TYPE SYNTAX EthernetPortSpeed MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to configure the speed of the Port." ::= { ieee1588EthernetPortEntry 9 } ieee1588EthernetPortNegotiatedSpeed OBJECT-TYPE SYNTAX EthernetPortSpeed MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the negotiated speed of the Port." ::= { ieee1588EthernetPortEntry 10 } ieee1588EthernetPortMDIXType OBJECT-TYPE SYNTAX CmEthernetMDIXType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows management of MDIX property on Port." ::= { ieee1588EthernetPortEntry 11 } -- -- GPS 10MHz Port -- gps10MHzPortTable OBJECT-TYPE SYNTAX SEQUENCE OF GPS10MHzPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to GPS 10MHz Facilities for configuration purposes." ::= { cmFacilityObjects 18 } gps10MHzPortEntry OBJECT-TYPE SYNTAX GPS10MHzPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the GPS 10MHz Port Table." INDEX { neIndex, shelfIndex, slotIndex, gps10MHzPortIndex } ::= { gps10MHzPortTable 1 } GPS10MHzPortEntry ::= SEQUENCE { -- Port Indices gps10MHzPortIndex Integer32, gps10MHzPortIfIndex InterfaceIndex, gps10MHzPortEntityIndex PhysicalIndex, -- State Management params gps10MHzPortAdminState AdminState, gps10MHzPortOperationalState OperationalState, gps10MHzPortSecondaryState SecondaryState, gps10MHzPortSignalDirection SignalDirectionType, gps10MHzPortSquelchControl SquelchControl, gps10MHzPortSquelchQL SSMQualityLevel, gps10MHzPortFrequencySource VariablePointer, gps10MHzPortClockClass Unsigned32, -- deprecated, should not be in this group. gps10MHzPortClockAccuracy Unsigned32, -- deprecated, should not be in this group. gps10MHzPortTimeSource TimeSource, -- deprecated, should not be in this group. gps10MHzPortAssumedQL SSMQualityLevel, gps10MHzPortAlias DisplayString, gps10MHzPortInputSignalType ClkSignalType } -- Port Indices gps10MHzPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify the IEEE Ethernet Port." ::= { gps10MHzPortEntry 1 } gps10MHzPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the same value as ifIndex for the IEEE Ethernet Port." ::= { gps10MHzPortEntry 2 } gps10MHzPortEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Entity Index from ENTITY-MIB for this port." ::= { gps10MHzPortEntry 3 } -- State Management params gps10MHzPortAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the Port." ::= { gps10MHzPortEntry 4 } gps10MHzPortOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the Port." ::= { gps10MHzPortEntry 5 } gps10MHzPortSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Port." ::= { gps10MHzPortEntry 6 } gps10MHzPortSignalDirection OBJECT-TYPE SYNTAX SignalDirectionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the signal type (i.e. input or output)." ::= { gps10MHzPortEntry 7 } gps10MHzPortSquelchControl OBJECT-TYPE SYNTAX SquelchControl MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set the Squelch Control for the 10MHz port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port. Only option supported is squelch-ql." ::= { gps10MHzPortEntry 8 } gps10MHzPortSquelchQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set the Squelch QL for the 10MHz port. This value is used when f310MHzClockPortSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched." ::= { gps10MHzPortEntry 9 } gps10MHzPortFrequencySource OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set the Frequency Source for the Port." ::= { gps10MHzPortEntry 10 } gps10MHzPortClockClass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specify GPS port clock class." ::= { gps10MHzPortEntry 11 } gps10MHzPortClockAccuracy OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specify GPS port clock accuracy." ::= { gps10MHzPortEntry 12 } gps10MHzPortTimeSource OBJECT-TYPE SYNTAX TimeSource MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specify GPS port time source." ::= { gps10MHzPortEntry 13 } gps10MHzPortAssumedQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the assumed QL on the GPS Port. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port's QL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference." ::= { gps10MHzPortEntry 14 } gps10MHzPortAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows SNMP management entities to provide an alias to the gps 10MHz Port entity." ::= { gps10MHzPortEntry 15 } gps10MHzPortInputSignalType OBJECT-TYPE SYNTAX ClkSignalType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the input signal type (i.e. 10mhz or 2048khz)." ::= { gps10MHzPortEntry 16 } -- -- Ethernet Network Port Cable Length Benchmark -- cmEthernetNetPortClbTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetNetPortClbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Network Port Cable Length Benchmark." ::= { cmFacilityObjects 19 } cmEthernetNetPortClbEntry OBJECT-TYPE SYNTAX CmEthernetNetPortClbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetNetPortClbTable. These entries represent Cable Length Benchmarks on the Ethernet Network Port." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex, cmEthernetNetPortClbIndex } ::= { cmEthernetNetPortClbTable 1 } CmEthernetNetPortClbEntry ::= SEQUENCE { cmEthernetNetPortClbIndex Integer32, cmEthernetNetPortClbEnabled TruthValue, cmEthernetNetPortClbLength DisplayString, cmEthernetNetPortClbDescr DisplayString } cmEthernetNetPortClbIndex OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this Cable Length Benchmark Entry specification." ::= { cmEthernetNetPortClbEntry 1 } cmEthernetNetPortClbEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This enables specification of Cable Length Benchmark entry." ::= { cmEthernetNetPortClbEntry 2 } cmEthernetNetPortClbLength OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Cable length of Cable Points Entry. The cable length is of the form XXX[.YY] where XX can be any integer value and YY allows precision of 2 decimals after the floating point. Note that .YY is optional." ::= { cmEthernetNetPortClbEntry 3 } cmEthernetNetPortClbDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "A textual string containing description of cable span." ::= { cmEthernetNetPortClbEntry 4 } --Network Port Priority Mapping cmNetPortPrioMapTable OBJECT-TYPE SYNTAX SEQUENCE OF CmNetPortPrioMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Network Port Priority Mappings in multi Class of Service (COS) mode." ::= { cmFacilityObjects 20 } cmNetPortPrioMapEntry OBJECT-TYPE SYNTAX CmNetPortPrioMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmNetPortPrioMapTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex, cmNetPortPrioMapIndex } ::= { cmNetPortPrioMapTable 1 } CmNetPortPrioMapEntry ::= SEQUENCE { cmNetPortPrioMapIndex Integer32, cmNetPortPrioMapInPriority Integer32, cmNetPortPrioMapCOS Integer32, cmNetPortPrioMapOuterTagPriority VlanPriority } cmNetPortPrioMapIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The integer index value corresponding to a priority value." ::= { cmNetPortPrioMapEntry 1 } cmNetPortPrioMapInPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The integer index value corresponding to a priority value." ::= { cmNetPortPrioMapEntry 2 } cmNetPortPrioMapCOS OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow." ::= { cmNetPortPrioMapEntry 3 } cmNetPortPrioMapOuterTagPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This allows specification of the VLAN priority that will replace the outgoing (N2A direction) outer-tag's priority. Note that, each flow participates or not in outer-tag priority mapping, using the object 'cmFlowN2AOuterTagPrioEnabled'." ::= { cmNetPortPrioMapEntry 4 } -- -- Access Port PCP encoding table -- cmAccPortPcpDEEncTable OBJECT-TYPE SYNTAX SEQUENCE OF CmAccPortPcpDEEncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Access Port PCP drop eligibility encoding table. This is applied to a frame that is egressing at the Access port." ::= { cmFacilityObjects 21 } cmAccPortPcpDEEncEntry OBJECT-TYPE SYNTAX CmAccPortPcpDEEncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the ethernetPBPcpDEEncPortTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetAccPortIndex, cmAccPortPcpDEEncIndex } ::= { cmAccPortPcpDEEncTable 1 } CmAccPortPcpDEEncEntry ::= SEQUENCE { cmAccPortPcpDEEncIndex Integer32, cmAccPortPcpDEEncInPriority VlanPriority, cmAccPortPcpDEEncDropIneligiblePrio VlanPriority, cmAccPortPcpDEEncDropEligiblePrio VlanPriority } cmAccPortPcpDEEncIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the PCP drop eligible encoding table." ::= { cmAccPortPcpDEEncEntry 1 } cmAccPortPcpDEEncInPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority." ::= { cmAccPortPcpDEEncEntry 2 } cmAccPortPcpDEEncDropIneligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the PCP value that has a priority value with implicit drop ineligibility encoded into it." ::= { cmAccPortPcpDEEncEntry 3 } cmAccPortPcpDEEncDropEligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the PCP value that has a priority value with implicit drop eligibility encoded into it." ::= { cmAccPortPcpDEEncEntry 4 } -- -- Access Port PCP decoding table -- cmAccPortPcpDEDecTable OBJECT-TYPE SYNTAX SEQUENCE OF CmAccPortPcpDEDecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Access Port PCP drop eligibility decoding table. This is applied to a frame that is ingressing at a port." ::= { cmFacilityObjects 22 } cmAccPortPcpDEDecEntry OBJECT-TYPE SYNTAX CmAccPortPcpDEDecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the ethernetPBPcpDEDecPortTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetAccPortIndex, cmAccPortPcpDEDecIndex } ::= { cmAccPortPcpDEDecTable 1 } CmAccPortPcpDEDecEntry ::= SEQUENCE { cmAccPortPcpDEDecIndex Integer32, cmAccPortPcpDEDecInPriority VlanPriority, cmAccPortPcpDEDecOutPriority VlanPriority, cmAccPortPcpDEDecDropEligible TruthValue } cmAccPortPcpDEDecIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the PCP drop eligible decoding table." ::= { cmAccPortPcpDEDecEntry 1 } cmAccPortPcpDEDecInPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the input priority that is decoded to get priority and the drop eligibility of a frame." ::= { cmAccPortPcpDEDecEntry 2 } cmAccPortPcpDEDecOutPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the priority value decoded from a incoming PCP value." ::= { cmAccPortPcpDEDecEntry 3 } cmAccPortPcpDEDecDropEligible OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop eligibility decoded from a incoming PCP value." ::= { cmAccPortPcpDEDecEntry 4 } -- -- Access Port PCP pair table -- cmAccPortPcpDEPairTable OBJECT-TYPE SYNTAX SEQUENCE OF CmAccPortPcpDEPairEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Access Port PCP drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the PCP DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D." ::= { cmFacilityObjects 23 } cmAccPortPcpDEPairEntry OBJECT-TYPE SYNTAX CmAccPortPcpDEPairEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmAccPortPcpDEPairEntry." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetAccPortIndex, cmAccPortPcpDEPairIndex } ::= { cmAccPortPcpDEPairTable 1 } CmAccPortPcpDEPairEntry ::= SEQUENCE { cmAccPortPcpDEPairIndex Integer32, cmAccPortPcpDEDropIneligiblePrio VlanPriority, cmAccPortPcpDEDropEligiblePrio VlanPriority } cmAccPortPcpDEPairIndex OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the PCP drop eligible priority pair table." ::= { cmAccPortPcpDEPairEntry 1 } cmAccPortPcpDEDropIneligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop ineligible priority." ::= { cmAccPortPcpDEPairEntry 2 } cmAccPortPcpDEDropEligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop eligible priority." ::= { cmAccPortPcpDEPairEntry 3 } -- -- Network Port PCP encoding table -- cmNetPortPcpDEEncTable OBJECT-TYPE SYNTAX SEQUENCE OF CmNetPortPcpDEEncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Network Port PCP drop eligibility encoding table. This is applied to a frame that is egressing at the Network port." ::= { cmFacilityObjects 24 } cmNetPortPcpDEEncEntry OBJECT-TYPE SYNTAX CmNetPortPcpDEEncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the ethernetPBPcpDEEncPortTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex, cmNetPortPcpDEEncIndex } ::= { cmNetPortPcpDEEncTable 1 } CmNetPortPcpDEEncEntry ::= SEQUENCE { cmNetPortPcpDEEncIndex Integer32, cmNetPortPcpDEEncInPriority VlanPriority, cmNetPortPcpDEEncDropIneligiblePrio VlanPriority, cmNetPortPcpDEEncDropEligiblePrio VlanPriority } cmNetPortPcpDEEncIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the PCP drop eligible encoding table." ::= { cmNetPortPcpDEEncEntry 1 } cmNetPortPcpDEEncInPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority." ::= { cmNetPortPcpDEEncEntry 2 } cmNetPortPcpDEEncDropIneligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the PCP value that has a priority value with implicit drop ineligibility encoded into it." ::= { cmNetPortPcpDEEncEntry 3 } cmNetPortPcpDEEncDropEligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the PCP value that has a priority value with implicit drop eligibility encoded into it." ::= { cmNetPortPcpDEEncEntry 4 } -- -- Network Port PCP decoding table -- cmNetPortPcpDEDecTable OBJECT-TYPE SYNTAX SEQUENCE OF CmNetPortPcpDEDecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Network Port PCP drop eligibility decoding table. This is applied to a frame that is ingressing at a port." ::= { cmFacilityObjects 25 } cmNetPortPcpDEDecEntry OBJECT-TYPE SYNTAX CmNetPortPcpDEDecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the ethernetPBPcpDEDecPortTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex, cmNetPortPcpDEDecIndex } ::= { cmNetPortPcpDEDecTable 1 } CmNetPortPcpDEDecEntry ::= SEQUENCE { cmNetPortPcpDEDecIndex Integer32, cmNetPortPcpDEDecInPriority VlanPriority, cmNetPortPcpDEDecOutPriority VlanPriority, cmNetPortPcpDEDecDropEligible TruthValue } cmNetPortPcpDEDecIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the PCP drop eligible decoding table." ::= { cmNetPortPcpDEDecEntry 1 } cmNetPortPcpDEDecInPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the input priority that is decoded to get priority and the drop eligibility of a frame." ::= { cmNetPortPcpDEDecEntry 2 } cmNetPortPcpDEDecOutPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the priority value decoded from a incoming PCP value." ::= { cmNetPortPcpDEDecEntry 3 } cmNetPortPcpDEDecDropEligible OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop eligibility decoded from a incoming PCP value." ::= { cmNetPortPcpDEDecEntry 4 } -- -- Network Port PCP pair table -- cmNetPortPcpDEPairTable OBJECT-TYPE SYNTAX SEQUENCE OF CmNetPortPcpDEPairEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Network Port PCP drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the PCP DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D." ::= { cmFacilityObjects 26 } cmNetPortPcpDEPairEntry OBJECT-TYPE SYNTAX CmNetPortPcpDEPairEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmNetPortPcpDEPairEntry." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex, cmNetPortPcpDEPairIndex } ::= { cmNetPortPcpDEPairTable 1 } CmNetPortPcpDEPairEntry ::= SEQUENCE { cmNetPortPcpDEPairIndex Integer32, cmNetPortPcpDEDropIneligiblePrio VlanPriority, cmNetPortPcpDEDropEligiblePrio VlanPriority } cmNetPortPcpDEPairIndex OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the PCP drop eligible priority pair table." ::= { cmNetPortPcpDEPairEntry 1 } cmNetPortPcpDEDropIneligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop ineligible priority." ::= { cmNetPortPcpDEPairEntry 2 } cmNetPortPcpDEDropEligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop eligible priority." ::= { cmNetPortPcpDEPairEntry 3 } -- -- Agg Ethernet Port -- cmEthernetTrafficPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetTrafficPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Facilities for configuration purposes." ::= { cmFacilityObjects 27} cmEthernetTrafficPortEntry OBJECT-TYPE SYNTAX CmEthernetTrafficPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetTrafficPortTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex } ::= { cmEthernetTrafficPortTable 1 } CmEthernetTrafficPortEntry ::= SEQUENCE { -- Port Indices cmEthernetTrafficPortIndex Integer32, cmEthernetTrafficPortIfIndex InterfaceIndex, cmEthernetTrafficPortEntityIndex PhysicalIndex, -- State Management params cmEthernetTrafficPortAdminState AdminState, cmEthernetTrafficPortOperationalState OperationalState, cmEthernetTrafficPortSecondaryState SecondaryState, -- Generic Port params cmEthernetTrafficPortMTU Integer32, -- Generic Ethernet Port params cmEthernetTrafficPortMediaType EthernetMediaType, cmEthernetTrafficPortConfigSpeed EthernetPortSpeed, cmEthernetTrafficPortNegotiatedSpeed EthernetPortSpeed, cmEthernetTrafficPortMDIXType CmEthernetMDIXType, cmEthernetTrafficPortMDIXStatus CmEthernetMDIXType, cmEthernetTrafficPortSfpVendorName DisplayString, cmEthernetTrafficPortSfpPartNumber DisplayString, cmEthernetTrafficPortSfpSerialNumber DisplayString, cmEthernetTrafficPortSfpDateOfManufacture DateAndTime, cmEthernetTrafficPortSfpConnectorValue SfpConnectorValue, cmEthernetTrafficPortSfpLinkLength Integer32, cmEthernetTrafficPortSfpLaserWaveLength Integer32, cmEthernetTrafficPortSfpMediaType SfpMediaType, -- Ethernet Loopback params cmEthernetTrafficPortLoopbackConfig CmLoopbackType, cmEthernetTrafficPortLoopbackStatus CmLoopbackType, cmEthernetTrafficPortLoopbackTime Integer32, cmEthernetTrafficPortLoopbackSwapSADA CmSwapSADAType, cmEthernetTrafficPortOuterVlanLoopbackMask INTEGER, cmEthernetTrafficPortOuterVlanLoopback1 DisplayString, cmEthernetTrafficPortOuterVlanLoopback2 DisplayString, cmEthernetTrafficPortOuterVlanLoopback3 DisplayString, -- Link Loss Forwarding params cmEthernetTrafficPortLinkLossFwdEnabled TruthValue, cmEthernetTrafficPortLinkLossFwdSignalType CmLinkLossFwdSignalType, cmEthernetTrafficPortLinkLossFwdTriggerTypes CmLinkLossFwdTriggerTypes, cmEthernetTrafficPortLinkLossFwdDelay Integer32, cmEthernetTrafficPortLinkLossFwdActive TruthValue, cmEthernetTrafficPortLinkLossFwdPartnerEnabled TruthValue, cmEthernetTrafficPortLinkLossFwdLocalLinkId Integer32, cmEthernetTrafficPortLinkLossFwdRemoteLinkIds DisplayString, cmEthernetTrafficPortLinkLossFwdTxActionType CmLinkLossFwdTxActionType, cmEthernetTrafficPortLinkLossFwdRxRLDLinkIds DisplayString, -- OAM params cmEthernetTrafficPortOamId Integer32, cmEthernetTrafficPortOamDiscoveryState CmOamDiscoveryState, cmEthernetTrafficPortOamLocalVarRtrvsEnabled TruthValue, cmEthernetTrafficPortOamLocalLinkEventsEnabled TruthValue, cmEthernetTrafficPortOamLocalOamLoopbacksSupported TruthValue, cmEthernetTrafficPortOamLocalUnidirSupportEnabled TruthValue, cmEthernetTrafficPortOamLocalMaxPDUSize Integer32, cmEthernetTrafficPortOamLocalMode CmOamMode, cmEthernetTrafficPortOamRemoteMacAddress MacAddress, cmEthernetTrafficPortOamRemoteVarRtrvsEnabled TruthValue, cmEthernetTrafficPortOamRemoteLinkEventsEnabled TruthValue, cmEthernetTrafficPortOamRemoteOamLoopbacksSupported TruthValue, cmEthernetTrafficPortOamRemoteUnidirSupportEnabled TruthValue, cmEthernetTrafficPortOamRemoteMaxPDUSize Integer32, cmEthernetTrafficPortOamRemoteMode CmOamMode, cmEthernetTrafficPortOamEnabled TruthValue, cmEthernetTrafficPortOamAdminState CmOamAdminState, -- Ethernet Port Service params cmEthernetTrafficPortSvcType CmEthernetTrafficSvcType, -- Ethernet Port Traffic params cmEthernetTrafficPortRxPauseEnabled TruthValue, cmEthernetTrafficPortTxPauseEnabled TruthValue, cmEthernetTrafficPortAfpType CmAfpType, -- Ethernet Port Traffic params cmEthernetTrafficPortShapingEnabled TruthValue, cmEthernetTrafficPortShapedSpeedLo Unsigned32, cmEthernetTrafficPortShapedSpeedHi Unsigned32, cmEthernetTrafficPortQinQEtherType Unsigned32, --Ethernet Port Services params cmEthernetTrafficPortTagFrameControl AfpTagControl, cmEthernetTrafficPortEgressVlanTrunkingEnabled TruthValue, cmEthernetTrafficPortIngressPushPVIDEnabled TruthValue, cmEthernetTrafficPortEgressPopPVIDEnabled TruthValue, cmEthernetTrafficPortEgressPopPriorityVidEnabled TruthValue, cmEthernetTrafficPortPortVlanId VlanId, cmEthernetTrafficPortPortVlanPriority VlanPriority, cmEthernetTrafficPortPriorityVlanId VlanId, cmEthernetTrafficPortIngressPrioMapMode PriorityMapMode, cmEthernetTrafficPortIngressCOSPriority VlanTagType, --Synchronous Port params cmEthernetTrafficPortSyncEEnabled TruthValue, cmEthernetTrafficPortQLModeEnabled TruthValue, cmEthernetTrafficPortExpectedQL SSMQualityLevel, cmEthernetTrafficPortAssumedQL SSMQualityLevel, cmEthernetTrafficPortReceivedQL SSMQualityLevel, cmEthernetTrafficPortTransmitQL SSMQualityLevel, cmEthernetTrafficPortPhyType XgePhyType, cmEthernetTrafficPortSfpLaserWaveLengthPicometer Unsigned32, cmEthernetTrafficPortRowStatus RowStatus, cmEthernetTrafficPortSSMRemoteMacAddress MacAddress, cmEthernetTrafficPortInnerVlanLoopbackMask INTEGER, cmEthernetTrafficPortInnerVlanLoopback1 DisplayString, cmEthernetTrafficPortInnerVlanLoopback2 DisplayString, cmEthernetTrafficPortInnerVlanLoopback3 DisplayString, cmEthernetTrafficPortLaserWDMChannel SfpChannelIdentifier, cmEthernetTrafficPortLaserIsTunable TruthValue, cmEthernetTrafficPortLaserFrequency Unsigned32, cmEthernetTrafficPortDeiEnable TruthValue, cmEthernetTrafficPortPcpDEEncType PcpDEEncType, cmEthernetTrafficPortPcpDEPairsAction PcpDEPairsAction, cmEthernetTrafficPortInitiateDiag CmEthernetDiagAction, cmEthernetTrafficPortDiagnosePair1Cond CmDiagCableCondType, cmEthernetTrafficPortDiagnosePair2Cond CmDiagCableCondType, cmEthernetTrafficPortDiagnosePair3Cond CmDiagCableCondType, cmEthernetTrafficPortDiagnosePair4Cond CmDiagCableCondType, cmEthernetTrafficPortDiagnoseAutoNegCond CmDiagAutoNegCondType, cmEthernetTrafficPortDiagnoseLpbkCond CmDiagLpbkCondType, cmEthernetTrafficPortDiagnoseEfmLpbkCond CmDiagEfmOamLpbkCondType, cmEthernetTrafficPortDiagnoseResult DisplayString, cmEthernetTrafficPortDiagnoseTestStatus CmDiagTestStatus, cmEthernetTrafficPortDiagnoseTestTime DateAndTime, cmEthernetTrafficPortAutoDiagEnabled TruthValue, cmEthernetTrafficPortDeleteEntitiesAction TrafficPortDeleteEntitiesAction, cmEthernetTrafficPortMaxMpFpNum Integer32, cmEthernetTrafficPortJdsuLoopbackEnabled TruthValue, cmEthernetTrafficPortJdsuLoopbackVlanId VlanId, cmEthernetTrafficPortIngressPopPriorityVidEnabled TruthValue, cmEthernetTrafficPortRxDeiAction RxDeiAction, cmEthernetTrafficPortTxDeiAction TxDeiAction, cmEthernetTrafficPortRxDeiOuterTagType DeiOuterTagType, cmEthernetTrafficPortTxDeiOuterTagType DeiOuterTagType, -- 9.1.1 XGPRO release new columns cmEthernetTrafficPortMode CmEthernetSvcPortMode, cmEthernetTrafficPortServiceType CmEthernetSvcType, cmEthernetTrafficPortLoopbackSourceMacControlEnabled TruthValue, cmEthernetTrafficPortLoopbackDestMacControlEnabled TruthValue, cmEthernetTrafficPortLoopbackSourceMacAddress MacAddress, cmEthernetTrafficPortLoopbackDestMacAddress MacAddress, cmEthernetTrafficPortLoopbackBlockingEnabled TruthValue, cmEthernetTrafficPortMediaTypeAutoSelected EthernetMediaType, cmEthernetTrafficPortLowLatencyQueuingEnabled TruthValue, cmEthernetTrafficPortDiagnosticMacAddress MacAddress, cmEthernetTrafficPortIngressSwapPriorityVIDEnabled TruthValue, cmEthernetTrafficPortEgressSwapPriorityVIDEnabled TruthValue, cmEthernetTrafficPortSwapPriorityVID VlanId, cmEthernetTrafficPortExpDEEncType PcpDEEncType, cmEthernetTrafficPortExpDEPairsAction PcpDEPairsAction, cmEthernetTrafficPortJdsuLoopbackSrcIp IpAddress, -- 540X Additional SyncE Attribute cmEthernetTrafficPortTxSsm ToggleValue, cmEthernetTrafficPortRxSsmQL SynceRxSsmQl, cmEthernetTrafficPortSyncEMode SynceMode, cmEthernetTrafficPortSyncEServiceAvailableTime Unsigned32, cmEthernetTrafficPortSyncEServiceUnavailableTime Unsigned32, cmEthernetTrafficPortSyncEServiceAvailablePercentage DisplayString, cmEthernetTrafficPortWfqSegmentationCOS Integer32, cmEthernetTrafficPortWfqGroupCOS Integer32, cmEthernetTrafficPortWfqGroupEirLo Unsigned32, cmEthernetTrafficPortWfqGroupEirHi Unsigned32, -- Ethernet Port Traffic params cmEthernetTrafficPortOuterTagTpidOverride TruthValue, cmEthernetTrafficPortOuterTagTpid Unsigned32, -- Ethernet Port Power Level params cmEthernetTrafficPortSfpTxPowerLevel DisplayString, cmEthernetTrafficPortSfpRxPowerLevel DisplayString, cmEthernetTrafficPortBwResourcePort VariablePointer, -- Ethernet Port SFP params cmEthernetTrafficPortSfpName DisplayString, cmEthernetTrafficPortSfpHardwareRevision DisplayString, -- Ethernet Port Loopback Test Reflector params cmEthernetTrafficPortLoopbackTestReflectorIPv4AddressControl TruthValue, cmEthernetTrafficPortLoopbackTestReflectorIPv4Address IpAddress, cmEthernetTrafficPortLoopbackTestReflectorIPv6AddressControl TruthValue, cmEthernetTrafficPortLoopbackTestReflectorIPv6Address Ipv6Address, -- Ethernet Port SFP params cmEthernetTrafficPortSfpIdentifierValue SfpIdentifierValue, -- Ethernet Port Plug params cmEthernetTrafficPortPlugType PlugType, cmEthernetTrafficPortPlugMode PlugMode, cmEthernetTrafficPortPlugGMetroAutoTuningMode GMetroAutoTuningMode, cmEthernetTrafficPortPlugChannelType ChannelType, cmEthernetTrafficPortPlugITUCbandChannel ITUCBandChannelIdentifier, cmEthernetTrafficPortPlugRelativeChannel RelativeChannelIdentifier, cmEthernetTrafficPortPlugFrequency FrequencyIdentifier, cmEthernetTrafficPortPlugOutOfBandChannelStatus OutOfBandChannelStatus, -- Ethernet Port Remote Plug params cmEthernetTrafficPortRemotePlugITUCbandChannel ITUCBandChannelIdentifier, cmEthernetTrafficPortRemotePlugRelativeChannel RelativeChannelIdentifier, cmEthernetTrafficPortRemotePlugFrequency FrequencyIdentifier, -- Ethernet Port Remote SFP params cmEthernetTrafficPortRemoteSfpVendorName DisplayString, cmEthernetTrafficPortRemoteSfpName DisplayString, cmEthernetTrafficPortRemoteSfpPartNumber DisplayString, cmEthernetTrafficPortRemoteSfpHardwareRevision DisplayString, cmEthernetTrafficPortRemoteSfpSerialNumber DisplayString, cmEthernetTrafficPortRemoteSfpDateOfManufacture DateAndTime, cmEthernetTrafficPortRemoteSfpLinkLength Integer32, cmEthernetTrafficPortRemoteSfpLaserWaveLength Integer32, cmEthernetTrafficPortRemoteSfpLaserFrequency Unsigned32, cmEthernetTrafficPortRemoteSfpMediaType SfpMediaType, cmEthernetTrafficPortRemoteSfpConnectorValue SfpConnectorValue, cmEthernetTrafficPortRemoteSfpIdentifierValue SfpIdentifierValue } -- Port Indices cmEthernetTrafficPortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this Ethernet Port within a card. Note that each Ethernet Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex." ::= { cmEthernetTrafficPortEntry 1 } cmEthernetTrafficPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the same value as ifIndex for Ethernet Port. An integer index value used to uniquely identify this Ethernet Port." ::= { cmEthernetTrafficPortEntry 2 } cmEthernetTrafficPortEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Entity Index from ENTITY-MIB for this port." ::= { cmEthernetTrafficPortEntry 3 } -- State Management params cmEthernetTrafficPortAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the Ethernet Port." ::= { cmEthernetTrafficPortEntry 4 } cmEthernetTrafficPortOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the Ethernet Port." ::= { cmEthernetTrafficPortEntry 5 } cmEthernetTrafficPortSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Ethernet Port." ::= { cmEthernetTrafficPortEntry 6 } -- Generic Port params cmEthernetTrafficPortMTU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the MTU on the Ethernet Port. The object is made read-write for FSP150CC devices." ::= { cmEthernetTrafficPortEntry 7 } cmEthernetTrafficPortMediaType OBJECT-TYPE SYNTAX EthernetMediaType MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the type of Ethernet Media on the Ethernet Port. The media type includes, copper (1) fiber (2) coppersfp (3) CM Aggregation Product doesn't support copper." ::= { cmEthernetTrafficPortEntry 8 } cmEthernetTrafficPortConfigSpeed OBJECT-TYPE SYNTAX EthernetPortSpeed MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to configure the speed of the Ethernet Port." ::= { cmEthernetTrafficPortEntry 9 } cmEthernetTrafficPortNegotiatedSpeed OBJECT-TYPE SYNTAX EthernetPortSpeed MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the negotiated speed of the Ethernet Port." ::= { cmEthernetTrafficPortEntry 10 } cmEthernetTrafficPortMDIXType OBJECT-TYPE SYNTAX CmEthernetMDIXType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows management of MDIX property on Ethernet Port." ::= { cmEthernetTrafficPortEntry 11 } cmEthernetTrafficPortMDIXStatus OBJECT-TYPE SYNTAX CmEthernetMDIXType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the current MDIX status of the Ethernet port." ::= { cmEthernetTrafficPortEntry 12 } cmEthernetTrafficPortSfpVendorName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the vendor name of the SFP. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp." ::= { cmEthernetTrafficPortEntry 13 } cmEthernetTrafficPortSfpPartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the part number of the SFP. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp." ::= { cmEthernetTrafficPortEntry 14 } cmEthernetTrafficPortSfpSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the serial number of the SFP. This is shown only when cmEthernetTrafficPortMediaType is fiber." ::= { cmEthernetTrafficPortEntry 15 } cmEthernetTrafficPortSfpDateOfManufacture OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the date of manufacture of the SFP. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp." ::= { cmEthernetTrafficPortEntry 16 } cmEthernetTrafficPortSfpConnectorValue OBJECT-TYPE SYNTAX SfpConnectorValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP connector value. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp." ::= { cmEthernetTrafficPortEntry 17 } -- Generic Ethernet Port params cmEthernetTrafficPortSfpLinkLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP Link Length. This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp." ::= { cmEthernetTrafficPortEntry 18 } cmEthernetTrafficPortSfpLaserWaveLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP Laser Wave Length in nano meters. This is applicable only when cmEthernetTrafficPortMediaType is fiber." ::= { cmEthernetTrafficPortEntry 19 } cmEthernetTrafficPortSfpMediaType OBJECT-TYPE SYNTAX SfpMediaType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP Media Type. This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp." ::= { cmEthernetTrafficPortEntry 20 } -- Ethernet Loopback params cmEthernetTrafficPortLoopbackConfig OBJECT-TYPE SYNTAX CmLoopbackType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to initiate loopbacks on on the Ethernet Port." ::= { cmEthernetTrafficPortEntry 21 } cmEthernetTrafficPortLoopbackStatus OBJECT-TYPE SYNTAX CmLoopbackType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides status of the current loopback on the Ethernet Port." ::= { cmEthernetTrafficPortEntry 22 } cmEthernetTrafficPortLoopbackTime OBJECT-TYPE SYNTAX Integer32 (2..300) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify time for timed-loopbacks on on the Ethernet Port." ::= { cmEthernetTrafficPortEntry 23 } cmEthernetTrafficPortLoopbackSwapSADA OBJECT-TYPE SYNTAX CmSwapSADAType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify whether or not the loopbacked frame will have the Source Address and Destination Address swapped." ::= { cmEthernetTrafficPortEntry 24 } cmEthernetTrafficPortOuterVlanLoopbackMask OBJECT-TYPE SYNTAX INTEGER (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the outer VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Outer VLAN 1 Loopback Enabled 2 Outer VLAN 2 Loopback Enabled 4 Outer VLAN 3 Loopback Enabled" ::= { cmEthernetTrafficPortEntry 25 } cmEthernetTrafficPortOuterVlanLoopback1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the outer VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetTrafficPortEntry 26 } cmEthernetTrafficPortOuterVlanLoopback2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the outer VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetTrafficPortEntry 27 } cmEthernetTrafficPortOuterVlanLoopback3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the outer VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortOuterVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetTrafficPortEntry 28 } -- Link Loss Forwarding params cmEthernetTrafficPortLinkLossFwdEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows enabling/disabling link loss forwarding on the Ethernet Port." ::= { cmEthernetTrafficPortEntry 29 } cmEthernetTrafficPortLinkLossFwdSignalType OBJECT-TYPE SYNTAX CmLinkLossFwdSignalType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows definition of the link loss forwarding signalling type. This is applicable only if cmEthernetTrafficPortLinkLossFwdEnabled is enabled." ::= { cmEthernetTrafficPortEntry 30 } cmEthernetTrafficPortLinkLossFwdTriggerTypes OBJECT-TYPE SYNTAX CmLinkLossFwdTriggerTypes MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows definition of the link loss forwarding trigger types. This is applicable only if cmEthernetTrafficPortLinkLossFwdEnabled is enabled." ::= { cmEthernetTrafficPortEntry 31 } cmEthernetTrafficPortLinkLossFwdDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the delay between detection of link loss and signalling of link loss forwarding. Time specified is in seconds." ::= { cmEthernetTrafficPortEntry 32 } cmEthernetTrafficPortLinkLossFwdActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the link loss forwarding status indicating if link loss forwarding is currently being signaled via the port." ::= { cmEthernetTrafficPortEntry 33 } cmEthernetTrafficPortLinkLossFwdPartnerEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the indication of a link partners ability to support link loss forwarding via EFM, i.e. from received organization specific OAMPDUs." ::= { cmEthernetTrafficPortEntry 34 } cmEthernetTrafficPortLinkLossFwdLocalLinkId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows configuration of the Local Link Id on Ethernet port." ::= { cmEthernetTrafficPortEntry 35 } cmEthernetTrafficPortLinkLossFwdRemoteLinkIds OBJECT-TYPE SYNTAX DisplayString (SIZE (0..512)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows enabling/disabling Remote Link Ids on Ethernet port. The Ethernet port is able to distinguish the remote side client ports from the Remote Link Down PDUs coming from remote end. Input format allows multiple Remote Link Ids seperated by comma (e.g. 1,2,3,10,20...). Number range is product-specific (for EGX8.1, max value is 554). Empty string clears the configuration." ::= { cmEthernetTrafficPortEntry 36 } cmEthernetTrafficPortLinkLossFwdTxActionType OBJECT-TYPE SYNTAX CmLinkLossFwdTxActionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Ethernet Port's behavior when link loss forwarding trigger events occur on the Port. This provides ability to configure per Ethernet port LLF behavior." ::= { cmEthernetTrafficPortEntry 37 } cmEthernetTrafficPortLinkLossFwdRxRLDLinkIds OBJECT-TYPE SYNTAX DisplayString (SIZE (0..512)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the received Remote Link IDs in EFM RLD messages on the Ethernet Port." ::= { cmEthernetTrafficPortEntry 38 } -- OAM params cmEthernetTrafficPortOamId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "OAM Id. This is unique EFM OAM sublayer port id." ::= { cmEthernetTrafficPortEntry 39 } cmEthernetTrafficPortOamDiscoveryState OBJECT-TYPE SYNTAX CmOamDiscoveryState MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Port's OAM discovery state." ::= { cmEthernetTrafficPortEntry 40 } cmEthernetTrafficPortOamLocalVarRtrvsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows specification of whether the Ethernet Port supports sending variable response OAMPDUs." ::= { cmEthernetTrafficPortEntry 41 } cmEthernetTrafficPortOamLocalLinkEventsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows specification of whether the Ethernet Port supports interpreting Link Events." ::= { cmEthernetTrafficPortEntry 42 } cmEthernetTrafficPortOamLocalOamLoopbacksSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of whether the Ethernet Port is capable of OAM remote loopback mode." ::= { cmEthernetTrafficPortEntry 43 } cmEthernetTrafficPortOamLocalUnidirSupportEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows specification of whether the Ethernet Port is capable of sending OAMPDUs when the receive path is non-operational." ::= { cmEthernetTrafficPortEntry 44 } cmEthernetTrafficPortOamLocalMaxPDUSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the largest OAMPDU, in octets, supported by the Ethernet Port. This value is compared to the remote Maximum PDU Size and the smaller of the two is used." ::= { cmEthernetTrafficPortEntry 45 } cmEthernetTrafficPortOamLocalMode OBJECT-TYPE SYNTAX CmOamMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to configure the OAM sublayer entity in either Active or Passive mode." ::= { cmEthernetTrafficPortEntry 46 } cmEthernetTrafficPortOamRemoteMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of the Remote Mac Address." ::= { cmEthernetTrafficPortEntry 47 } cmEthernetTrafficPortOamRemoteVarRtrvsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of whether the remote OAM entity supports sending variable response OAMPDUs." ::= { cmEthernetTrafficPortEntry 48 } cmEthernetTrafficPortOamRemoteLinkEventsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of whether the remote OAM entity supports interpreting Link Events." ::= { cmEthernetTrafficPortEntry 49 } cmEthernetTrafficPortOamRemoteOamLoopbacksSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of whether the remote OAM entity supports OAM remote loopback mode." ::= { cmEthernetTrafficPortEntry 50 } cmEthernetTrafficPortOamRemoteUnidirSupportEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of whether the remote OAM entity is capable of sending OAMPDUs when the receive path is non-operational." ::= { cmEthernetTrafficPortEntry 51 } cmEthernetTrafficPortOamRemoteMaxPDUSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of the remote OAM entity maximum OAMPDU size." ::= { cmEthernetTrafficPortEntry 52 } cmEthernetTrafficPortOamRemoteMode OBJECT-TYPE SYNTAX CmOamMode MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows to retrieve whether the remote OAM sublayer entity is either in Active or Passive mode." ::= { cmEthernetTrafficPortEntry 53 } cmEthernetTrafficPortOamEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the EFM OAM on Ethernet Traffic Port." ::= { cmEthernetTrafficPortEntry 54 } cmEthernetTrafficPortOamAdminState OBJECT-TYPE SYNTAX CmOamAdminState MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the EFM OAM Admin State." ::= { cmEthernetTrafficPortEntry 55 } -- Ethernet Port Service params cmEthernetTrafficPortSvcType OBJECT-TYPE SYNTAX CmEthernetTrafficSvcType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of whether the Ethernet Port is port based or vlan based." ::= { cmEthernetTrafficPortEntry 56 } -- Ethernet Port Traffic params cmEthernetTrafficPortRxPauseEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the RxPause enable or disable of the port." ::= { cmEthernetTrafficPortEntry 57 } cmEthernetTrafficPortTxPauseEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows enabling/disabling transmit pause frames on Ethernet port." ::= { cmEthernetTrafficPortEntry 58 } cmEthernetTrafficPortAfpType OBJECT-TYPE SYNTAX CmAfpType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Acceptable Frame Policy on Ethernet port. Users can specify whether the port supports only tagged frames, only untagged frames or both tagged and untagged frames." ::= { cmEthernetTrafficPortEntry 59 } -- Ethernet Port Traffic params cmEthernetTrafficPortShapingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the Ethernet Port Shaping. When enabled, values in cmEthernetTrafficPortShapedSpeedLo and cmEthernetTrafficPortShapedSpeedHi are applicable." ::= { cmEthernetTrafficPortEntry 60 } cmEthernetTrafficPortShapedSpeedLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the lower 32 bits of the Ethernet Port Shaped speed. This value is applicable when cmEthernetTrafficPortShapingEnabled is enabled." ::= { cmEthernetTrafficPortEntry 61 } cmEthernetTrafficPortShapedSpeedHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the higher 32 bits of the Port Shaped speed. This value is applicable when cmEthernetTrafficPortShapingEnabled is enabled." ::= { cmEthernetTrafficPortEntry 62 } cmEthernetTrafficPortQinQEtherType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Q-in-Q Ether Type on the Port." ::= { cmEthernetTrafficPortEntry 63 } --Ethernet Port Services params cmEthernetTrafficPortTagFrameControl OBJECT-TYPE SYNTAX AfpTagControl MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines if c-tag/s-tag frame is allowed to pass through, available only when AFP is set to Tagged." ::= { cmEthernetTrafficPortEntry 64 } cmEthernetTrafficPortEgressVlanTrunkingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to enable or disable the VLAN trunking on Ethernet port. Disabling VLAN trunking removes all VLAN tags before transmitting traffic out of the port. This object is only applicable for connection-oriented, evpl service type." ::= { cmEthernetTrafficPortEntry 65 } cmEthernetTrafficPortIngressPushPVIDEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify whether cmEthernetTrafficPortPortVlanId value will be PUSHed on untagged frames or not in the ingress direction. This object is only applicable for connection-oriented, evpl service type." ::= { cmEthernetTrafficPortEntry 66 } cmEthernetTrafficPortEgressPopPVIDEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify whether cmEthernetTrafficPortPortVlanId value will be POPed in the egress direction. This object is only applicable for connection-oriented, evpl service type." ::= { cmEthernetTrafficPortEntry 67 } cmEthernetTrafficPortEgressPopPriorityVidEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the egress PopPriorityVid enable or disable of the port. If it is enabled, the outgoing packets with VID=Priority VLAN ID will be swapped back to VID=0. This attribute has been deprecated and is supported only on EG-X. Please use cmEthernetTrafficPortEgressSwapPriorityVIDEnabled" ::= { cmEthernetTrafficPortEntry 68 } cmEthernetTrafficPortPortVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Ethernet Port VLAN Id to PUSH on untagged frames in the to Network direction. This object is only applicable for connection-oriented, evpl service type, when cmEthernetTrafficPortIngressPushPVIDEnabled is set to true." ::= { cmEthernetTrafficPortEntry 69 } cmEthernetTrafficPortPortVlanPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Ethernet Port VLAN Priority for the PUSHed VLAN tag (specified by cmEthernetTrafficPortPortVlanId) on untagged frames in the ingress direction. This object is only applicable for connection-oriented, evpl service type, when cmEthernetTrafficPortIngressPushPVIDEnabled is set to true." ::= { cmEthernetTrafficPortEntry 70 } cmEthernetTrafficPortPriorityVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object allows to specify the Ethernet Priority VLAN Id to replace the null-tagged or priority tagged frames in the to ingress direction. This object is only applicable for connection-oriented, evpl service type. This attribute has been deprecated and is supported only on EG-X. Please use cmEthernetTrafficPortSwapPriorityVID" ::= { cmEthernetTrafficPortEntry 71 } cmEthernetTrafficPortIngressPrioMapMode OBJECT-TYPE SYNTAX PriorityMapMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Ethernet Port Priority Mapping Mode used for classification of frames. This object is only applicable for connection-oriented, evpl service type." ::= { cmEthernetTrafficPortEntry 72 } cmEthernetTrafficPortIngressCOSPriority OBJECT-TYPE SYNTAX VlanTagType MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object is used to specify whether the EthernetTrafficPort uses the inner-tag or the outer-tag in determining the COS (Class of Service). This attribute has been deprecated and is not supported. Now, the Priority Map Mode indicates whether it is inner or outer. Use priomap-8021p(4) for outer and priomap-8021p-inner(5) for inner." ::= { cmEthernetTrafficPortEntry 73 } --Synchronous Port params cmEthernetTrafficPortSyncEEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify whether the Ethernet Port can be enabled/disabled for Synchronous Ethernet. This object is only applicable for Synchronous Ethernet capable ports. When enabled, on receive side -port can extract the frequency of its input signal and pass the recovered clock to the system clock -port processes the ESMC(Ethernet Synchronization Messaging Channel) and extracts the QL (when also QL enabled) -port is eligible to be selected as a system clock reference When enabled, on transmit side -port's transmit clock is locked to the system clock -port generates an ESMC to generate a QL (when also QL enabled) When disabled, on receive side, -port does not pass the recovered clock to the system clock -port does not process the ESMC (if present) -port is not eligible to be selected as a system clock reference When disabled, on transmit side -port's output frequency may be synchronized to the system clock -port does not generate an ESMC." ::= { cmEthernetTrafficPortEntry 74 } cmEthernetTrafficPortQLModeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify whether the Ethernet Port can be enabled/disabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetTrafficPortQLModeEnabled is set to true. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs." ::= { cmEthernetTrafficPortEntry 75 } cmEthernetTrafficPortExpectedQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the expected QL when the Ethernet Port is enabled for QL Mode. This object is only applicable for Synchronous Ethernet capable ports, when cmEthernetTrafficPortQLModeEnabled is set to true. This object allows the user to set a minimum expected received Quality Level on the port. The valid values depend upon the SYNC entity Network Clock Type. A value of None represents that a minimum Quality Level is not expected. The default value shall be None." ::= { cmEthernetTrafficPortEntry 76 } cmEthernetTrafficPortAssumedQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the assumed QL on the Ethernet Port. This object is only applicable for Synchronous Ethernet capable ports. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port TransmitQL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference." ::= { cmEthernetTrafficPortEntry 77 } cmEthernetTrafficPortReceivedQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Received QL value for the Ethernet port. If the Ethernet port TransmitQL Mode is disabled, then the received QL value is not applicable.This object is only applicable for Synchronous Ethernet capable ports." ::= { cmEthernetTrafficPortEntry 78 } cmEthernetTrafficPortTransmitQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Transmitted QL value for the Ethernet port. If the Ethernet port TransmitQL Mode is disabled, then the received QL value is not applicable. This object is only applicable for Synchronous Ethernet capable ports." ::= { cmEthernetTrafficPortEntry 79 } cmEthernetTrafficPortPhyType OBJECT-TYPE SYNTAX XgePhyType MAX-ACCESS read-write STATUS current DESCRIPTION "This object is valid only to XGE card. And the value should be LAN or WAN when it is XGE card." ::= { cmEthernetTrafficPortEntry 80 } cmEthernetTrafficPortSfpLaserWaveLengthPicometer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provide laser wavelength pico value. For example, laser wavelength is 1510.01, then cmEthernetTrafficPortSfpLaserWaveLength=1510 and cmTrafficPortSfpLaserWaveLengthPicometer=10." ::= { cmEthernetTrafficPortEntry 81 } cmEthernetTrafficPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmEthernetTrafficPortRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmEthernetTrafficPortRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmEthernetTrafficPortEntry 82 } cmEthernetTrafficPortSSMRemoteMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows retrieval of the Remote Mac Address, when the port is peering using SSM." ::= { cmEthernetTrafficPortEntry 83 } cmEthernetTrafficPortInnerVlanLoopbackMask OBJECT-TYPE SYNTAX INTEGER (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the inner VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be specified for vlan loopback. The various bit positions are: 1 Inner VLAN 1 Loopback Enabled 2 Inner VLAN 2 Loopback Enabled 4 Inner VLAN 3 Loopback Enabled" ::= { cmEthernetTrafficPortEntry 84 } cmEthernetTrafficPortInnerVlanLoopback1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the inner VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetTrafficPortEntry 85 } cmEthernetTrafficPortInnerVlanLoopback2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the inner VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetTrafficPortEntry 86 } cmEthernetTrafficPortInnerVlanLoopback3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the inner VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in cmEthernetTrafficPortInnerVlanLoopbackMask is set. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetTrafficPortEntry 87 } cmEthernetTrafficPortLaserWDMChannel OBJECT-TYPE SYNTAX SfpChannelIdentifier MAX-ACCESS read-write STATUS current DESCRIPTION "Channel number of WDM tunable XFP setting." ::= { cmEthernetTrafficPortEntry 88 } cmEthernetTrafficPortLaserIsTunable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object means this module whether tunnable." ::= { cmEthernetTrafficPortEntry 89 } cmEthernetTrafficPortLaserFrequency OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes this module's frequency, and the step is 1GHZ." ::= { cmEthernetTrafficPortEntry 90 } cmEthernetTrafficPortDeiEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object describes whether use DEI bit in S-tag to recognize Drop Eligibility Parameter for ingress S-tag packets or Set DEI bit for egress S-tag Packets. This object is still supported by OSA8.1.1" ::= { cmEthernetTrafficPortEntry 91 } cmEthernetTrafficPortPcpDEEncType OBJECT-TYPE SYNTAX PcpDEEncType MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the PCP encoding mode for egress packets and the PCP decoding mode for ingress packets on this port." ::= { cmEthernetTrafficPortEntry 92 } cmEthernetTrafficPortPcpDEPairsAction OBJECT-TYPE SYNTAX PcpDEPairsAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes this port pcp de pairs action." ::= { cmEthernetTrafficPortEntry 93 } -- EtherJack Diagnosis params cmEthernetTrafficPortInitiateDiag OBJECT-TYPE SYNTAX CmEthernetDiagAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to initiate Etherjack diagnosis on the Ethernet Traffic Port." ::= { cmEthernetTrafficPortEntry 94 } cmEthernetTrafficPortDiagnosePair1Cond OBJECT-TYPE SYNTAX CmDiagCableCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides diagnosis results for the cable Pair 1 on Ethernet Traffic Port." ::= { cmEthernetTrafficPortEntry 95 } cmEthernetTrafficPortDiagnosePair2Cond OBJECT-TYPE SYNTAX CmDiagCableCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides diagnosis results for the cable Pair 2 on Ethernet Traffic Port." ::= { cmEthernetTrafficPortEntry 96 } cmEthernetTrafficPortDiagnosePair3Cond OBJECT-TYPE SYNTAX CmDiagCableCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides diagnosis results for the cable Pair 3 on Ethernet Traffic Port." ::= { cmEthernetTrafficPortEntry 97 } cmEthernetTrafficPortDiagnosePair4Cond OBJECT-TYPE SYNTAX CmDiagCableCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides diagnosis results for the cable Pair 4 on Ethernet Traffic Port." ::= { cmEthernetTrafficPortEntry 98 } cmEthernetTrafficPortDiagnoseAutoNegCond OBJECT-TYPE SYNTAX CmDiagAutoNegCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides auto negotiation results of the diagnosis test on Ethernet Traffic Port." ::= { cmEthernetTrafficPortEntry 99 } cmEthernetTrafficPortDiagnoseLpbkCond OBJECT-TYPE SYNTAX CmDiagLpbkCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides port loopback results of the diagnosis test on Ethernet Traffic Port." ::= { cmEthernetTrafficPortEntry 100 } cmEthernetTrafficPortDiagnoseEfmLpbkCond OBJECT-TYPE SYNTAX CmDiagEfmOamLpbkCondType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides remote EFM loopback results of the diagnosis test on Ethernet Traffic Port." ::= { cmEthernetTrafficPortEntry 101 } cmEthernetTrafficPortDiagnoseResult OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides results of the diagnosis test in string form on Ethernet Traffic Port." ::= { cmEthernetTrafficPortEntry 102 } cmEthernetTrafficPortDiagnoseTestStatus OBJECT-TYPE SYNTAX CmDiagTestStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the current status of the diagnosis test on Ethernet Traffic Port." ::= { cmEthernetTrafficPortEntry 103 } cmEthernetTrafficPortDiagnoseTestTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the time when diagnosis test was last executed." ::= { cmEthernetTrafficPortEntry 104 } cmEthernetTrafficPortAutoDiagEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to enable or disable the automatic Cable Diagnostic tests when the cable is removed from the port." ::= { cmEthernetTrafficPortEntry 105 } cmEthernetTrafficPortDeleteEntitiesAction OBJECT-TYPE SYNTAX TrafficPortDeleteEntitiesAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to delete esa entities relate this port and Cfm entities relate this port." ::= { cmEthernetTrafficPortEntry 106 } cmEthernetTrafficPortMaxMpFpNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set the mpflow max fp number, and now only the ports on ethernet10x1GCard, ethernet1x10GCard, ethernet1x10GHighPerCard, ethernet10x1GHighPerCard support this attribute. for others, cann't be set and will return 0." ::= { cmEthernetTrafficPortEntry 107 } cmEthernetTrafficPortJdsuLoopbackEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object allows to enable or disable jdsu loopback on this port. Note: This object is deprecated." ::= { cmEthernetTrafficPortEntry 108 } cmEthernetTrafficPortJdsuLoopbackVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object allows to set the jdsu loopback vlan. if status is jdsu-terminal-port-tailend(19) or jdsu-facility-port-tailend(21), then VID is 0 means not applicable. Note: This object is deprecated." ::= { cmEthernetTrafficPortEntry 109 } cmEthernetTrafficPortIngressPopPriorityVidEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the Ingress PopPriorityVid enable or disable of the port. If it is enabled, then incoming priority tagged packet's VID is swapped to Priority VLAN ID. This attribute has been deprecated and is supported only on EG-X. Please use cmEthernetTrafficPortIngressSwapPriorityVIDEnabled" ::= { cmEthernetTrafficPortEntry 110 } cmEthernetTrafficPortRxDeiAction OBJECT-TYPE SYNTAX RxDeiAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Receive DEI Action." ::= { cmEthernetTrafficPortEntry 111 } cmEthernetTrafficPortTxDeiAction OBJECT-TYPE SYNTAX TxDeiAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Transmit DEI Action." ::= { cmEthernetTrafficPortEntry 112 } cmEthernetTrafficPortRxDeiOuterTagType OBJECT-TYPE SYNTAX DeiOuterTagType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Receive DEI Outer Tag Type." ::= { cmEthernetTrafficPortEntry 113 } cmEthernetTrafficPortTxDeiOuterTagType OBJECT-TYPE SYNTAX DeiOuterTagType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Transmit DEI Outer Tag Type." ::= { cmEthernetTrafficPortEntry 114 } -- 9.1.1 XGPRO release new columns cmEthernetTrafficPortMode OBJECT-TYPE SYNTAX CmEthernetSvcPortMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of whether the Ethernet Traffic Port is in a connection-oriented (offering VLAN based services) mode or connection-less (offering MAC based services) mode." ::= { cmEthernetTrafficPortEntry 115 } cmEthernetTrafficPortServiceType OBJECT-TYPE SYNTAX CmEthernetSvcType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of whether the Ethernet Traffic Port provides transparent port based services, or multi-flow VLAN based services." ::= { cmEthernetTrafficPortEntry 116 } cmEthernetTrafficPortLoopbackSourceMacControlEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to Enable/Disable the Traffic Port Source MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed." ::= { cmEthernetTrafficPortEntry 117 } cmEthernetTrafficPortLoopbackDestMacControlEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to Enable/Disable the Traffic Port Destination MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remote-timed." ::= { cmEthernetTrafficPortEntry 118 } cmEthernetTrafficPortLoopbackSourceMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set Traffic Port Source MAC Address for frame matching when Traffic Port Source MAC Control is enabled." ::= { cmEthernetTrafficPortEntry 119 } cmEthernetTrafficPortLoopbackDestMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set Traffic Port Destination MAC Address for frame matching when Traffic Port Destination MAC Control is enabled." ::= { cmEthernetTrafficPortEntry 120 } cmEthernetTrafficPortLoopbackBlockingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows frame blocking when loopback is active. - True: Blocks frames in the non-loopback direction that match the PORT or VLAN received in the non-loopback direction. Discards frames in the loopback direction that match the PORT or VLAN, but do not match the MAC address criteria, - False: No blocking of frames." ::= { cmEthernetTrafficPortEntry 121 } cmEthernetTrafficPortMediaTypeAutoSelected OBJECT-TYPE SYNTAX EthernetMediaType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the auto selected Ethernet Media of the Ethernet Traffic Port." ::= { cmEthernetTrafficPortEntry 122 } cmEthernetTrafficPortLowLatencyQueuingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to Enable/Disable the Low Latency Queuing on the Ethernet Traffic Port." ::= { cmEthernetTrafficPortEntry 123 } cmEthernetTrafficPortDiagnosticMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc." ::= { cmEthernetTrafficPortEntry 124 } cmEthernetTrafficPortIngressSwapPriorityVIDEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the Ingress Swap Priority Vid enable or disable of the port. If it is enabled, then incoming priority tagged packet's VID is swapped to Priority VLAN ID." ::= { cmEthernetTrafficPortEntry 125 } cmEthernetTrafficPortEgressSwapPriorityVIDEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the egress Swap Priority Vid enable or disable of the port. If it is enabled, the outgoing packets with VID=Priority VLAN ID will be swapped back to VID=0." ::= { cmEthernetTrafficPortEntry 126 } cmEthernetTrafficPortSwapPriorityVID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the Ethernet Priority VLAN Id to replace the null-tagged or priority tagged frames in the to ingress direction. This object is only applicable for connection-oriented, evpl service type." ::= { cmEthernetTrafficPortEntry 127 } cmEthernetTrafficPortExpDEEncType OBJECT-TYPE SYNTAX PcpDEEncType MAX-ACCESS read-write STATUS current DESCRIPTION "This is a port level control that specifies the mode of drop eligibility encoding in exp bits of the VLAN tag." ::= { cmEthernetTrafficPortEntry 128 } cmEthernetTrafficPortExpDEPairsAction OBJECT-TYPE SYNTAX PcpDEPairsAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetTrafficPortExpDEEncType is of type 7p1d, 6p2d, 5p3d, the cmEthernetTrafficPortExpDEPairTable can be used to specify alternate pairs of priorities to specify drop eligibility/ ineligibility." ::= { cmEthernetTrafficPortEntry 129 } cmEthernetTrafficPortJdsuLoopbackSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object is applicable when there is jdsu l3 loopback." ::= { cmEthernetTrafficPortEntry 130 } cmEthernetTrafficPortTxSsm OBJECT-TYPE SYNTAX ToggleValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage (enable/disable) TX SMM on OSA540X ethernet port." ::= { cmEthernetTrafficPortEntry 131 } cmEthernetTrafficPortRxSsmQL OBJECT-TYPE SYNTAX SynceRxSsmQl MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage how RX quality level is utilized on OSA540X ethernet port." ::= { cmEthernetTrafficPortEntry 132 } cmEthernetTrafficPortSyncEMode OBJECT-TYPE SYNTAX SynceMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage SyncE mode (master or slave) on OSA540X ethernet port." ::= { cmEthernetTrafficPortEntry 133 } cmEthernetTrafficPortSyncEServiceAvailableTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows to manage service available time (seconds) for SYNCE." ::= { cmEthernetTrafficPortEntry 134 } cmEthernetTrafficPortSyncEServiceUnavailableTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows to manage service unavailable time (seconds) for SYNCE." ::= { cmEthernetTrafficPortEntry 135 } cmEthernetTrafficPortSyncEServiceAvailablePercentage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows to manage service available in percentage [XXX.YY%] for SYNCE." ::= { cmEthernetTrafficPortEntry 136 } cmEthernetTrafficPortWfqSegmentationCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify the wfq segmentation cos value." ::= { cmEthernetTrafficPortEntry 137 } cmEthernetTrafficPortWfqGroupCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify the wfq group cos value." ::= { cmEthernetTrafficPortEntry 138 } cmEthernetTrafficPortWfqGroupEirLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify the wfq group eir low 32 bits value." ::= { cmEthernetTrafficPortEntry 139 } cmEthernetTrafficPortWfqGroupEirHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify the wfq group eir high 32 bits value." ::= { cmEthernetTrafficPortEntry 140 } cmEthernetTrafficPortOuterTagTpidOverride OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows enabling/disabling of Outer Tag TPID override. When enabled, values in Outer Tag TPID is applicable on egress Ethernet Traffic Port." ::= { cmEthernetTrafficPortEntry 141 } cmEthernetTrafficPortOuterTagTpid OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the egress Outer Tag TPID on the Ethernet Traffic Port." ::= { cmEthernetTrafficPortEntry 142 } cmEthernetTrafficPortSfpTxPowerLevel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP TX power level in dBm. The format would be [+/-]XX.YYYY. Note: the sign [+/-] and the decimal point (.YYYY) are optional." ::= { cmEthernetTrafficPortEntry 143 } cmEthernetTrafficPortSfpRxPowerLevel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP TX power level in dBm. The format would be [+/-]XX.YYYY. Note: the sign [+/-] and the decimal point (.YYYY) are optional." ::= { cmEthernetTrafficPortEntry 144 } cmEthernetTrafficPortBwResourcePort OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies a port whose bandwidth resources will be used. This object is applicable only for VM Server ports." ::= { cmEthernetTrafficPortEntry 145 } -- Ethernet Port SFP params cmEthernetTrafficPortSfpName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the official name of the SFP." ::= { cmEthernetTrafficPortEntry 146 } cmEthernetTrafficPortSfpHardwareRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the hardware revision of the SFP." ::= { cmEthernetTrafficPortEntry 147 } cmEthernetTrafficPortLoopbackTestReflectorIPv4AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Control that enables/disables Test Reflector IPv4 Address to be used for Test Reflector IP Interface." ::= { cmEthernetTrafficPortEntry 148 } cmEthernetTrafficPortLoopbackTestReflectorIPv4Address OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This is the Test Reflector Interface IPv4 address." ::= { cmEthernetTrafficPortEntry 149 } cmEthernetTrafficPortLoopbackTestReflectorIPv6AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Control that enables/disables Test Reflector IPv6 Address to be used for Test Reflector IP Interface." ::= { cmEthernetTrafficPortEntry 150 } cmEthernetTrafficPortLoopbackTestReflectorIPv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This is the Test Reflector Interface IPv6 address." ::= { cmEthernetTrafficPortEntry 151 } cmEthernetTrafficPortSfpIdentifierValue OBJECT-TYPE SYNTAX SfpIdentifierValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP identifier value." ::= { cmEthernetTrafficPortEntry 152 } -- Ethernet Port Plug params cmEthernetTrafficPortPlugType OBJECT-TYPE SYNTAX PlugType MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the port's plug type." ::= { cmEthernetTrafficPortEntry 153 } cmEthernetTrafficPortPlugMode OBJECT-TYPE SYNTAX PlugMode MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies if the plug is acting as head-end or tail-end." ::= { cmEthernetTrafficPortEntry 154 } cmEthernetTrafficPortPlugGMetroAutoTuningMode OBJECT-TYPE SYNTAX GMetroAutoTuningMode MAX-ACCESS read-write STATUS current DESCRIPTION "This is tuning mode for G.Metro plug." ::= { cmEthernetTrafficPortEntry 155 } cmEthernetTrafficPortPlugChannelType OBJECT-TYPE SYNTAX ChannelType MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies plug's type channel configuration." ::= { cmEthernetTrafficPortEntry 156 } cmEthernetTrafficPortPlugITUCbandChannel OBJECT-TYPE SYNTAX ITUCBandChannelIdentifier MAX-ACCESS read-write STATUS current DESCRIPTION "If Channel Type is ITU-CBAND, this is the local plug's ITU C-band channel." ::= { cmEthernetTrafficPortEntry 157 } cmEthernetTrafficPortPlugRelativeChannel OBJECT-TYPE SYNTAX RelativeChannelIdentifier MAX-ACCESS read-write STATUS current DESCRIPTION "If Channel Type is RELATIVE-CHANNEL-NUMBER, this is the local plug's relative channel." ::= { cmEthernetTrafficPortEntry 158 } cmEthernetTrafficPortPlugFrequency OBJECT-TYPE SYNTAX FrequencyIdentifier MAX-ACCESS read-write STATUS current DESCRIPTION "If Channel Type is FREQUENCY, this is the local plug's frequency." ::= { cmEthernetTrafficPortEntry 159 } cmEthernetTrafficPortPlugOutOfBandChannelStatus OBJECT-TYPE SYNTAX OutOfBandChannelStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the out of band channel between the local and remote plug." ::= { cmEthernetTrafficPortEntry 160 } -- Ethernet Port Remote Plug params cmEthernetTrafficPortRemotePlugITUCbandChannel OBJECT-TYPE SYNTAX ITUCBandChannelIdentifier MAX-ACCESS read-write STATUS current DESCRIPTION "If Channel Type is ITU-CBAND, this is the remote plug's ITU C-band channel." ::= { cmEthernetTrafficPortEntry 161 } cmEthernetTrafficPortRemotePlugRelativeChannel OBJECT-TYPE SYNTAX RelativeChannelIdentifier MAX-ACCESS read-write STATUS current DESCRIPTION "If Channel Type is RELATIVE-CHANNEL-NUMBER, this is the remote plug's relative channel." ::= { cmEthernetTrafficPortEntry 162 } cmEthernetTrafficPortRemotePlugFrequency OBJECT-TYPE SYNTAX FrequencyIdentifier MAX-ACCESS read-write STATUS current DESCRIPTION "If Channel Type is FREQUENCY, this is the remote plug's frequency." ::= { cmEthernetTrafficPortEntry 163 } -- Ethernet Port Remote SFP params cmEthernetTrafficPortRemoteSfpVendorName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the vendor name of the Remote SFP." ::= { cmEthernetTrafficPortEntry 164 } cmEthernetTrafficPortRemoteSfpName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the official name of the Remote SFP." ::= { cmEthernetTrafficPortEntry 165 } cmEthernetTrafficPortRemoteSfpPartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the part number of the Remote SFP." ::= { cmEthernetTrafficPortEntry 166 } cmEthernetTrafficPortRemoteSfpHardwareRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the hardware revision of the Remote SFP." ::= { cmEthernetTrafficPortEntry 167 } cmEthernetTrafficPortRemoteSfpSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the serial number of the Remote SFP." ::= { cmEthernetTrafficPortEntry 168 } cmEthernetTrafficPortRemoteSfpDateOfManufacture OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the date of manufacture of the Remote SFP." ::= { cmEthernetTrafficPortEntry 169 } cmEthernetTrafficPortRemoteSfpLinkLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides Link Length of the Remote SFP." ::= { cmEthernetTrafficPortEntry 170 } cmEthernetTrafficPortRemoteSfpLaserWaveLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides Laser Wave Length in nano meters of the Remote SFP." ::= { cmEthernetTrafficPortEntry 171 } cmEthernetTrafficPortRemoteSfpLaserFrequency OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides frequency of the Remote SFP, the step is 1GHZ." ::= { cmEthernetTrafficPortEntry 172 } cmEthernetTrafficPortRemoteSfpMediaType OBJECT-TYPE SYNTAX SfpMediaType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides Media Type of the Remote SFP." ::= { cmEthernetTrafficPortEntry 173 } cmEthernetTrafficPortRemoteSfpConnectorValue OBJECT-TYPE SYNTAX SfpConnectorValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides Connector Type of the Remote SFP." ::= { cmEthernetTrafficPortEntry 174 } cmEthernetTrafficPortRemoteSfpIdentifierValue OBJECT-TYPE SYNTAX SfpIdentifierValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Remote SFP identifier value." ::= { cmEthernetTrafficPortEntry 175 } -- -- Agg Flow Table -- cmElineFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF CmElineFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Flows for configuration purposes." ::= { cmFacilityObjects 28 } cmElineFlowEntry OBJECT-TYPE SYNTAX CmElineFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmElineFlowTable. These entries represent an Flow." INDEX { neIndex, cmElineFlowIndex } ::= { cmElineFlowTable 1 } CmElineFlowEntry ::= SEQUENCE { -- Flow Index/Id cmElineFlowIndex Integer32, cmElineFlowCircuitName DisplayString, -- State Management params cmElineFlowAdminState AdminState, cmElineFlowOperationalState OperationalState, cmElineFlowSecondaryState SecondaryState, -- flow attributes cmElineFlowFP1 VariablePointer, cmElineFlowFP2 VariablePointer, --SNMP row creation cmElineFlowStorageType StorageType, cmElineFlowRowStatus RowStatus } cmElineFlowIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The integer index value corresponding to an Flow." ::= { cmElineFlowEntry 1 } cmElineFlowCircuitName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows SNMP management entities to provide a circuit identifier with the Flow." ::= { cmElineFlowEntry 2 } -- State Management params cmElineFlowAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the Flow." ::= { cmElineFlowEntry 3 } cmElineFlowOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the Flow." ::= { cmElineFlowEntry 4 } cmElineFlowSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Flow." ::= { cmElineFlowEntry 5 } cmElineFlowFP1 OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows SNMP management entities to provide a flowpoint with the Flow." ::= { cmElineFlowEntry 6 } cmElineFlowFP2 OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows SNMP management entities to provide another flowpoint with the Flow." ::= { cmElineFlowEntry 7 } cmElineFlowStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmElineFlowEntry 8 } cmElineFlowRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmElineFlowRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmElineFlowRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmElineFlowRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmElineFlowEntry 9 } -- -- Agg FlowPoint -- cmFlowPointTable OBJECT-TYPE SYNTAX SEQUENCE OF CmFlowPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to FlowPoint for configuration purposes." ::= { cmFacilityObjects 29 } cmFlowPointEntry OBJECT-TYPE SYNTAX CmFlowPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmFlowPointTable. These entries represent an FlowPoint. If the flowpoint attached to a lag, the slotIndex should be 255(255 is used to identify the flowpoint belongs to lag), and the cmEthernetTrafficPortIndex should be the f3LagIndex." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, cmFlowPointIndex } ::= { cmFlowPointTable 1 } CmFlowPointEntry ::= SEQUENCE { -- FlowPoint Index/Id cmFlowPointIndex Integer32, cmFlowPointCircuitName DisplayString, -- State Management params cmFlowPointAdminState AdminState, cmFlowPointOperationalState OperationalState, cmFlowPointSecondaryState SecondaryState, cmFlowPointAssociatedFlowId VariablePointer, cmFlowPointIngressMultiCOS TruthValue, cmFlowPointIngressCOS Integer32, --flowpoint membership cmFlowPointIngressVlanMemberList DisplayString, cmFlowPointVlanMemberAction FlowVlanActionType, cmFlowPointVlanMemberActionVlan DisplayString, cmFlowPointIngressUntaggedFrameEnabled TruthValue, --flowpoint tag management cmFlowPointCTagControl FlowTagControl, cmFlowPointCTagVlanId VlanId, cmFlowPointCTagVlanPriority VlanPriority, cmFlowPointSTagControl FlowTagControl, cmFlowPointSTagVlanId VlanId, cmFlowPointSTagVlanPriority VlanPriority, cmFlowPointEgressOuterTagPrioMapEnabled TruthValue, cmFlowPointColorMarkingSupported TruthValue, cmFlowPointAssociatedAclProfile VariablePointer, cmFlowPointSESFramesLossThresholdRatio Integer32, cmFlowPointStorageType StorageType, cmFlowPointRowStatus RowStatus, cmFlowPointDefaultMemberEnabled TruthValue, cmFlowPointMcastRateLimitEnabled TruthValue, cmFlowPointMcastRateLimitSpeedLo Unsigned32, cmFlowPointMcastRateLimitSpeedHi Unsigned32, cmFlowPointBcastRateLimitEnabled TruthValue, cmFlowPointBcastRateLimitSpeedLo Unsigned32, cmFlowPointBcastRateLimitSpeedHi Unsigned32, cmFlowPointSplitHorizonGroupOID VariablePointer, cmFlowPointLoopAvoidance VariablePointer, cmFlowPointHierarchicalCosEnabled TruthValue, cmFlowPointWfqQid Integer32, cmFlowPointWfqOutPriority Integer32, cmFlowPointMaximumBWLo Unsigned32, cmFlowPointMaximumBWHi Unsigned32, cmFlowPointGuaranteedBWLo Unsigned32, cmFlowPointGuaranteedBWHi Unsigned32, cmFlowPointRefPrioMapProfile VariablePointer, cmFlowPointMcastAndBcastRateLimitEnabled TruthValue, cmFlowPointMcastAndBcastRateLimitSpeedLo Unsigned32, cmFlowPointMcastAndBcastRateLimitSpeedHi Unsigned32, -- new 9.1.1 xgpro release columns cmFlowPointEgressShapingType ShapingType, cmFlowPointEgressInnerTagPrioMapEnabled TruthValue, cmFlowPointAutoBandwidthConfigEnabled TruthValue, cmFlowPointAutoCIRPercentage Integer32, cmFlowPointFrameFwdEnabled TruthValue, cmFlowPointUsePortPrioMapProfile TruthValue, cmFlowPointRefEoMplsPwObject VariablePointer, cmFlowPointElmiEvcIdentifier DisplayString, cmFlowPointRefElpObject VariablePointer, cmFlowPointEfEnabled TruthValue, cmFlowPointEfIdentificationType EfIdentificationType, cmFlowPointEfRateThresholdLo Unsigned32, cmFlowPointEfRateThresholdHi Unsigned32, cmFlowPointAclNoMatchDisposition AclNoMatchDispositionType, cmFlowPointEfIdentificationFields EfIdentificationFieldType, cmFlowPointWfqSegmentationCOS Integer32, cmFlowPointWfqGroupCOS Integer32, cmFlowPointWfqGroupEirLo Unsigned32, cmFlowPointWfqGroupEirHi Unsigned32 } cmFlowPointIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The integer index value corresponding to an FlowPoint." ::= { cmFlowPointEntry 1 } cmFlowPointCircuitName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows SNMP management entities to provide a circuit identifier with the FlowPoint." ::= { cmFlowPointEntry 2 } -- State Management params cmFlowPointAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the FlowPoint." ::= { cmFlowPointEntry 3 } cmFlowPointOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the FlowPoint." ::= { cmFlowPointEntry 4 } cmFlowPointSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the FlowPoint." ::= { cmFlowPointEntry 5 } cmFlowPointAssociatedFlowId OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the association of an Flow with an FlowPoint." ::= { cmFlowPointEntry 6 } cmFlowPointIngressMultiCOS OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of ingress multiple COS (Class of Service) FlowPoint." ::= { cmFlowPointEntry 7 } cmFlowPointIngressCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of ingress COS (Class of Service) FlowPoint." ::= { cmFlowPointEntry 8 } cmFlowPointIngressVlanMemberList OBJECT-TYPE SYNTAX DisplayString (SIZE (0..512)) MAX-ACCESS read-create STATUS current DESCRIPTION "It allows specification of VLAN members of the FlowPoint. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* or X (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. Once the flowpoint is created, this attribute can only be updated using cmFlowPointVlanMemberAction and cmFlowPointVlanMemberActionVlan objects." ::= { cmFlowPointEntry 9 } cmFlowPointVlanMemberAction OBJECT-TYPE SYNTAX FlowVlanActionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to add or remove the VLAN members specified by cmFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in the object cmFlowPointVlanMemberActionVlan and then should specify cmFlowPointVlanMemberAction on whether to add/remove the specified VLAN member." ::= { cmFlowPointEntry 10 } cmFlowPointVlanMemberActionVlan OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows adding/removing VLAN members to a flowpoint. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. In order to add/remove VLAN member to a flow, user must specify this object with appropriate VLAN and then invoke cmFlowPointVlanMemberAction." ::= { cmFlowPointEntry 11 } cmFlowPointIngressUntaggedFrameEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows to specify whether or not the flowpoint supports untagged frame." ::= { cmFlowPointEntry 12 } --flowpoint tag management cmFlowPointCTagControl OBJECT-TYPE SYNTAX FlowTagControl MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (cmFlowPointCTagVlanId) and priority (cmFlowPointCTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified cmFlowPointCTagVlanId and cmFlowPointCTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified cmFlowPointCTagVlanId; if the type is 'none', no C-TAG management is performed." ::= { cmFlowPointEntry 13 } cmFlowPointCTagVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the VLAN Id to be pushed or swapped, based on the value of cmFlowPointIngressCTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types." ::= { cmFlowPointEntry 14 } cmFlowPointCTagVlanPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of cmFlowPointIngressCTagControl. It is applicable for 'push' and 'swaptag' control types." ::= { cmFlowPointEntry 15 } cmFlowPointSTagControl OBJECT-TYPE SYNTAX FlowTagControl MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (cmFlowPointSTagVlanId) and priority (cmFlowPointSTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified cmFlowPointSTagVlanId and cmFlowPointSTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified cmFlowPointSTagVlanId; if the type is 'none', no S-TAG management is performed." ::= { cmFlowPointEntry 16 } cmFlowPointSTagVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the VLAN Id to be pushed or swapped, based on the value of cmFlowPointIngressSTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types." ::= { cmFlowPointEntry 17 } cmFlowPointSTagVlanPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of cmFlowPointIngressSTagControl. It is applicable for 'push' and 'swaptag' control types." ::= { cmFlowPointEntry 18 } cmFlowPointEgressOuterTagPrioMapEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag. When Enabled,it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled,the EgressPrioMapTable operations are ignored for specified Flow COS." ::= { cmFlowPointEntry 19 } cmFlowPointColorMarkingSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the egress color marking. If set to Enabled, the DEI bit of S-tag pushed will be remarked according the meter result. If set to Disabled, the DEI bit is forced to 0." ::= { cmFlowPointEntry 20 } cmFlowPointAssociatedAclProfile OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This object provides the association of an Flow with an ACL profile." ::= { cmFlowPointEntry 21 } cmFlowPointSESFramesLossThresholdRatio OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the flowpoint. This functionality is applicable if the flowpoint is monitored using the Y.1731 ESA functionality." ::= { cmFlowPointEntry 22 } cmFlowPointStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmFlowPointEntry 23 } cmFlowPointRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmFlowPointRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmFlowPointEntry 24 } cmFlowPointDefaultMemberEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "defaultMemberEnabled with enabled means that on this FP, the membership is all the tag packets without match any other membership associated to the port. Untagged means untagged flow. Default only care tagged flow." ::= { cmFlowPointEntry 25 } cmFlowPointMcastRateLimitEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether multicast packets need be limited per FP." ::= { cmFlowPointEntry 26 } cmFlowPointMcastRateLimitSpeedLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for multicast packets per FP When cmFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits." ::= { cmFlowPointEntry 27 } cmFlowPointMcastRateLimitSpeedHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for multicast packets per FP When cmFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits." ::= { cmFlowPointEntry 28 } cmFlowPointBcastRateLimitEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether broadcast packets need be limited per FP." ::= { cmFlowPointEntry 29 } cmFlowPointBcastRateLimitSpeedLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for broadcast packets per FP When cmFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits." ::= { cmFlowPointEntry 30 } cmFlowPointBcastRateLimitSpeedHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for broadcast packets per FP When cmFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits." ::= { cmFlowPointEntry 31 } cmFlowPointSplitHorizonGroupOID OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Split-Horizon Group EID. If there is no SHG, the value is none." ::= { cmFlowPointEntry 32 } cmFlowPointLoopAvoidance OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "EID of this associated Loop Avoidance protocol entity. A value of NONE indicates there is no loop avoidance protocol. Currently ERP EID is filled when ELAN service is created." ::= { cmFlowPointEntry 33 } cmFlowPointHierarchicalCosEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or Disable Hierarchical COS shaping (flow shaping)." ::= { cmFlowPointEntry 34 } cmFlowPointWfqQid OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute description the WFQ Qid." ::= { cmFlowPointEntry 35 } cmFlowPointWfqOutPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute description the WFQ out priority." ::= { cmFlowPointEntry 36 } cmFlowPointMaximumBWLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute description the flow point maximum bandwidth. This objects only represents low 32 bits." ::= { cmFlowPointEntry 37 } cmFlowPointMaximumBWHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute description the flow point maximum bandwidth. This objects only represents high 32 bits." ::= { cmFlowPointEntry 38 } cmFlowPointGuaranteedBWLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute description the flow point guaranteed bandwidth. This objects only represents low 32 bits." ::= { cmFlowPointEntry 39 } cmFlowPointGuaranteedBWHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute description the flow point guaranteed bandwidth. This objects only represents high 32 bits." ::= { cmFlowPointEntry 40 } cmFlowPointRefPrioMapProfile OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set priority map profile." ::= { cmFlowPointEntry 41 } cmFlowPointMcastAndBcastRateLimitEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether multicast packets and broadcast packets need be limited per FP." ::= { cmFlowPointEntry 42 } cmFlowPointMcastAndBcastRateLimitSpeedLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for multicast packets and broadcast packets per FP When cmFlowPointMcastAndBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits." ::= { cmFlowPointEntry 43 } cmFlowPointMcastAndBcastRateLimitSpeedHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for multicast packets and broadcast packets per FP When cmFlowPointMcastAndBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits." ::= { cmFlowPointEntry 44 } cmFlowPointEgressShapingType OBJECT-TYPE SYNTAX ShapingType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of Shaping Type for Flow Point. For 8.1.1 release, only flow-based Shaping Type is supported." ::= { cmFlowPointEntry 45 } cmFlowPointEgressInnerTagPrioMapEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines whether to use the Egress Prio Mapping to swap the priority of inner tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled, the EgressPrioMapTable operations are ignored for specified Flow COS." ::= { cmFlowPointEntry 46 } cmFlowPointAutoBandwidthConfigEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the shaper bandwidth is automatically adjusted by the system. For a single COS Flow Point, the shaper EIR bandwidth is set to the maximum port bandwidth; the shaper CIR is set to the available port bandwidth multiplied by the value of the cmFlowPointAutoCIRPercentage object. For a Hierarchical-COS Flow Point, the cmFlowPointMaximumBWLo and cmFlowPointMaximumBWHi are set to the maximum port bandwidth; the cmFlowPointGuaranteedBWLo and cmFlowPointGuaranteedBWHi are set to the available port bandwidth multiplied by the value of the cmFlowPointAutoCIRPercentage object. The value of this object must be FALSE when cmFlowPointIngressMultiCOSEnabled is TRUE and cmFlowPointHierarchicalCOSEnabled is FALSE." ::= { cmFlowPointEntry 47 } cmFlowPointAutoCIRPercentage OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the percentage of available shaper CIR to be assigned to this Flow Point when cmFlowPointAutoBandwidthConfigEnabled is TRUE." ::= { cmFlowPointEntry 48 } cmFlowPointFrameFwdEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When enabled Flow Point will forward frames it receives. When disabled, the Flow Point will not forward frames it receives." ::= { cmFlowPointEntry 49 } cmFlowPointUsePortPrioMapProfile OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates whether the flow point is using, if true, the port's Priority Mapping Profile or, if false, is using its own Priority Mapping Profile." ::= { cmFlowPointEntry 50 } cmFlowPointRefEoMplsPwObject OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies EoMpls Pw object OID." ::= { cmFlowPointEntry 51 } cmFlowPointElmiEvcIdentifier OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies FlowPoint Evc Identifier required for E-LMI feature." ::= { cmFlowPointEntry 52 } cmFlowPointRefElpObject OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies ELP object OID." ::= { cmFlowPointEntry 53 } cmFlowPointEfEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When enabled FlowPoint is configured to monitor elephant(large) flows. When disabled, elephant flow management is not supported on the FlowPoint." ::= { cmFlowPointEntry 54 } cmFlowPointEfIdentificationType OBJECT-TYPE SYNTAX EfIdentificationType MAX-ACCESS read-write STATUS current DESCRIPTION "The Elephant Flows are identified per flowpoint. This object specifies the type of Elephant Flow identification based on specific fields in the L2-L4 headers. The five-tuple identification includes the Source MAC Address, Destination MAC Address, Source IP Address, Destination IP Address and IP Protocol. The seven-tuple identification includes the five-tuple fields as well as Source Port and Destination Port. For Source and Destination ports, the supported protocols are TCP, UDP and SCTP." ::= { cmFlowPointEntry 55 } cmFlowPointEfRateThresholdLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the threshold for the rate to declare a flow as an Elephant Flow. If cmFlowPointEfEnabled is enabled and this is set to 0, it is same as cmFlowPointEfEnabled control being disabled. This object only represents lower-order 32 bits." ::= { cmFlowPointEntry 56 } cmFlowPointEfRateThresholdHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the threshold for the rate to declare a flow as an Elephant Flow. If cmFlowPointEfEnabled is enabled and this is set to 0, it is same as cmFlowPointEfEnabled control being disabled. This object only represents higher-order 32 bits." ::= { cmFlowPointEntry 57 } cmFlowPointAclNoMatchDisposition OBJECT-TYPE SYNTAX AclNoMatchDispositionType MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute allows specify ACL no match disposition type" ::= { cmFlowPointEntry 58 } cmFlowPointEfIdentificationFields OBJECT-TYPE SYNTAX EfIdentificationFieldType MAX-ACCESS read-write STATUS current DESCRIPTION "The Elephant Flows are identified per flowpoint. This object specifies the type of Elephant Flow identification based on specific fields in the L2-L4 headers. The identification includes the Source MAC Address, Destination MAC Address, Source IP Address, Destination IP Address, IP Protocol, Source Port and Destination Port. For Source and Destination ports, the supported protocols are TCP, UDP and SCTP." ::= { cmFlowPointEntry 59 } cmFlowPointWfqSegmentationCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify wfq segmentation COS value." ::= { cmFlowPointEntry 60 } cmFlowPointWfqGroupCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify wfq group COS value." ::= { cmFlowPointEntry 61 } cmFlowPointWfqGroupEirLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify wfq group EIR low 32 bits value." ::= { cmFlowPointEntry 62 } cmFlowPointWfqGroupEirHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify wfq group EIR high 32 bits value." ::= { cmFlowPointEntry 63 } -- -- Agg OAM FlowPoint -- cmOAMFlowPointTable OBJECT-TYPE SYNTAX SEQUENCE OF CmOAMFlowPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to OAMFlowPoint for configuration purposes." ::= { cmFacilityObjects 30 } cmOAMFlowPointEntry OBJECT-TYPE SYNTAX CmOAMFlowPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmOAMFlowPointTable. These entries represent an FlowPoint. If the oam flowpoint attached to a lag, the slotIndex should be 255(255 is used to identify the oam flowpoint belongs to lag), and the cmEthernetTrafficPortIndex should be the f3LagIndex." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, cmOAMFlowPointIndex } ::= { cmOAMFlowPointTable 1 } --OAM FlowPoint CmOAMFlowPointEntry ::= SEQUENCE { -- FlowPoint Index/Id cmOAMFlowPointIndex Integer32, cmOAMFlowPointCircuitName DisplayString, -- State Management params cmOAMFlowPointAdminState AdminState, cmOAMFlowPointOperationalState OperationalState, cmOAMFlowPointSecondaryState SecondaryState, --OAM flowpoint membership cmOAMFlowPointIngressVlanMemberList DisplayString, cmOAMFlowPointVlanMemberAction FlowVlanActionType, cmOAMFlowPointVlanMemberActionVlan DisplayString, cmOAMFlowPointIngressUntaggedFrameSupported TruthValue, cmOAMFlowPointSESFramesLossThresholdRatio Integer32, cmOAMFlowPointStorageType StorageType, cmOAMFlowPointRowStatus RowStatus } cmOAMFlowPointIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The integer index value corresponding to an OAMFlowPoint." ::= { cmOAMFlowPointEntry 1 } cmOAMFlowPointCircuitName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows SNMP management entities to provide a circuit identifier with the OAMFlowPoint." ::= { cmOAMFlowPointEntry 2 } -- State Management params cmOAMFlowPointAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the OAMFlowPoint." ::= { cmOAMFlowPointEntry 3 } cmOAMFlowPointOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the OAMFlowPoint." ::= { cmOAMFlowPointEntry 4 } cmOAMFlowPointSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the OAMFlowPoint." ::= { cmOAMFlowPointEntry 5 } cmOAMFlowPointIngressVlanMemberList OBJECT-TYPE SYNTAX DisplayString (SIZE (0..512)) MAX-ACCESS read-create STATUS current DESCRIPTION "It allows specification of VLAN members of the OAMFlowPoint. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* or X (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. Once the flowpoint is created, this attribute can only be updated using cmOAMFlowPointVlanMemberAction and cmOAMFlowPointVlanMemberActionVlan objects." ::= { cmOAMFlowPointEntry 6 } cmOAMFlowPointVlanMemberAction OBJECT-TYPE SYNTAX FlowVlanActionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to add or remove the VLAN members specified by cmOAMFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in the object cmOAMFlowPointVlanMemberActionVlan and then should specify cmOAMFlowPointVlanMemberAction on whether to add/remove the specified VLAN member." ::= { cmOAMFlowPointEntry 7 } cmOAMFlowPointVlanMemberActionVlan OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows adding/removing VLAN members to a oam flowpoint. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* (vlan X with all priorities), *-Y (all vlans with priority Y), and X1:X2 (range of vlans from X1 to X2, all priorities). Members with specific VLAN Id and specific VLAN Priority are not supported. In order to add/remove VLAN member to a flow, user must specify this object with appropriate VLAN and then invoke cmOAMFlowPointVlanMemberAction." ::= { cmOAMFlowPointEntry 8 } cmOAMFlowPointIngressUntaggedFrameSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows to specify whether or not the OAMFlowPoint supports untagged frame." ::= { cmOAMFlowPointEntry 9 } cmOAMFlowPointSESFramesLossThresholdRatio OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the oam flowpoint. This functionality is applicable if the oam flowpoint is monitored using the Y.1731 ESA functionality." ::= { cmOAMFlowPointEntry 10 } cmOAMFlowPointStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmOAMFlowPointEntry 11 } cmOAMFlowPointRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmOAMFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmOAMFlowPointRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmOAMFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmOAMFlowPointEntry 12 } -- --Agg Ingress Map Table -- cmIngressPrioMapTable OBJECT-TYPE SYNTAX SEQUENCE OF CmIngressPrioMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ingress Priority Mapping for configuration purposes." ::= { cmFacilityObjects 31 } cmIngressPrioMapEntry OBJECT-TYPE SYNTAX CmIngressPrioMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmIngressPrioMapTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, cmIngressPrioMapIndex } ::= { cmIngressPrioMapTable 1 } CmIngressPrioMapEntry ::= SEQUENCE { -- Flow Index/Id cmIngressPrioMapIndex Integer32, cmIngressPrioMapInPriority Integer32, cmIngressPrioMapCOS Integer32 } cmIngressPrioMapIndex OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS read-only STATUS current DESCRIPTION "The integer index value corresponding to a priority value based on the cmEthernetTrafficPortPrioMapMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of DSCP, valid indices are 1 to 64." ::= { cmIngressPrioMapEntry 1 } cmIngressPrioMapInPriority OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The integer index value corresponding to a priority value based on the cmEthernetTrafficPortIngressPrioMapMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of DSCP, valid indices are 0 to 63." ::= { cmIngressPrioMapEntry 2 } cmIngressPrioMapCOS OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow." ::= { cmIngressPrioMapEntry 3 } -- --Agg Egress Map Table -- cmEgressPrioMapTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEgressPrioMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Egress Priority Mapping for configuration purposes." ::= { cmFacilityObjects 32 } cmEgressPrioMapEntry OBJECT-TYPE SYNTAX CmEgressPrioMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEgressPrioMapTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, cmEgressCOSIndex } ::= { cmEgressPrioMapTable 1 } CmEgressPrioMapEntry ::= SEQUENCE { -- Flow Index/Id cmEgressCOSIndex Integer32, cmEgressCOS Integer32, cmEgressOuterTagCtrl PrioMapControlType, cmEgressOuterTagPriority VlanPriority } cmEgressCOSIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "The integer index used to uniquely identify this Egress Priority Map Entry " ::= { cmEgressPrioMapEntry 1 } cmEgressCOS OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow." ::= { cmEgressPrioMapEntry 2 } cmEgressOuterTagCtrl OBJECT-TYPE SYNTAX PrioMapControlType MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the behavior of the Priority portion of the frame transmit out. If NONE is selected, the outgoing priority bits are left unchanged. If SWAP is selected, the priority bits are changed by the value specified in the Outer-Tag Priority parameter." ::= { cmEgressPrioMapEntry 3 } cmEgressOuterTagPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the new priority bits to be used, it is available only if Outer-Tag PRIOCTL is set to SWAP." ::= { cmEgressPrioMapEntry 4 } -- -- Port Control Protocol Disposition V3 profile Table -- cmPortCpdProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF CmPortCpdProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to System Control Protocol Disposition V3 profile." ::= { cmFacilityObjects 33 } cmPortCpdProfileEntry OBJECT-TYPE SYNTAX CmPortCpdProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmPortCpdProfileTable. These entries represent a Control Protocol Disposition of a port filtering criteria of the System." INDEX { cmPortCpdProfileIndex } ::= { cmPortCpdProfileTable 1 } CmPortCpdProfileEntry ::= SEQUENCE { -- Index cmPortCpdProfileIndex Integer32, cmPortCpdProfileName DisplayString, -- Filtering Criteria cmPortCpdProfileCiscoGroupDispType CmControlProtocolDispType, cmPortCpdProfileIslDispType CmControlProtocolDispType, cmPortCpdProfilePagpDispType CmControlProtocolDispType, cmPortCpdProfileUdldDispType CmControlProtocolDispType, cmPortCpdProfileCdpDispType CmControlProtocolDispType, cmPortCpdProfileVtpDispType CmControlProtocolDispType, cmPortCpdProfileDtpDispType CmControlProtocolDispType, cmPortCpdProfilePvstpPlusDispType CmControlProtocolDispType, cmPortCpdProfileUplinkFastDispType CmControlProtocolDispType, cmPortCpdProfileVlanBridgeDispType CmControlProtocolDispType, cmPortCpdProfileL2PTDispType CmControlProtocolDispType, cmPortCpdProfileBridgeGroupDispType CmControlProtocolDispType, cmPortCpdProfileBPDUDispType CmControlProtocolDispType, cmPortCpdProfilePauseDispType CmControlProtocolDispType, cmPortCpdProfileLACPDispType CmControlProtocolDispType, cmPortCpdProfileLACPMarkerDispType CmControlProtocolDispType, cmPortCpdProfileEfmOamDispType CmControlProtocolDispType, cmPortCpdProfileSSMDispType CmControlProtocolDispType, cmPortCpdProfilePortAuthenDispType CmControlProtocolDispType, cmPortCpdProfileBridgeReservedDispType CmControlProtocolDispType, cmPortCpdProfileLANBridgesDispType CmControlProtocolDispType, cmPortCpdProfileGARPGroupDispType CmControlProtocolDispType, cmPortCpdProfileGMRPDispType CmControlProtocolDispType, cmPortCpdProfileGVRPDispType CmControlProtocolDispType, cmPortCpdProfileGARPDispType CmControlProtocolDispType, cmPortCpdProfileLldpDispType CmControlProtocolDispType, cmPortCpdProfileStorageType StorageType, cmPortCpdProfileRowStatus RowStatus, cmPortCpdProfileMac00DispType CmControlProtocolDispType, cmPortCpdProfileMac01DispType CmControlProtocolDispType, cmPortCpdProfileMac02DispType CmControlProtocolDispType, cmPortCpdProfileMac03DispType CmControlProtocolDispType, cmPortCpdProfileMac04DispType CmControlProtocolDispType, cmPortCpdProfileMac05DispType CmControlProtocolDispType, cmPortCpdProfileMac06DispType CmControlProtocolDispType, cmPortCpdProfileMac07DispType CmControlProtocolDispType, cmPortCpdProfileMac08DispType CmControlProtocolDispType, cmPortCpdProfileMac09DispType CmControlProtocolDispType, cmPortCpdProfileMac0ADispType CmControlProtocolDispType, cmPortCpdProfileMac0BDispType CmControlProtocolDispType, cmPortCpdProfileMac0CDispType CmControlProtocolDispType, cmPortCpdProfileMac0DDispType CmControlProtocolDispType, cmPortCpdProfileMac0EDispType CmControlProtocolDispType, cmPortCpdProfileMac0FDispType CmControlProtocolDispType, cmPortCpdProfileNearestLLDPDispType CmControlProtocolDispType, cmPortCpdProfileNonTpmrLLDPDispType CmControlProtocolDispType, cmPortCpdProfileCustomerLLDPDispType CmControlProtocolDispType, cmPortCpdProfileELMIDispType CmControlProtocolDispType } cmPortCpdProfileIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Unique Index value to access the CPD profile row." ::= { cmPortCpdProfileEntry 1 } cmPortCpdProfileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the alias of the cpd V3 profile entry." ::= { cmPortCpdProfileEntry 2 } cmPortCpdProfileCiscoGroupDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting." ::= { cmPortCpdProfileEntry 3 } cmPortCpdProfileIslDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00)." ::= { cmPortCpdProfileEntry 4 } cmPortCpdProfilePagpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104)." ::= { cmPortCpdProfileEntry 5 } cmPortCpdProfileUdldDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111)." ::= { cmPortCpdProfileEntry 6 } cmPortCpdProfileCdpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000)." ::= { cmPortCpdProfileEntry 7 } cmPortCpdProfileVtpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003)." ::= { cmPortCpdProfileEntry 8 } cmPortCpdProfileDtpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004)." ::= { cmPortCpdProfileEntry 9 } cmPortCpdProfilePvstpPlusDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B)." ::= { cmPortCpdProfileEntry 10 } cmPortCpdProfileUplinkFastDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A)." ::= { cmPortCpdProfileEntry 11 } cmPortCpdProfileVlanBridgeDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C)." ::= { cmPortCpdProfileEntry 12 } cmPortCpdProfileL2PTDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0)." ::= { cmPortCpdProfileEntry 13 } cmPortCpdProfileBridgeGroupDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F." ::= { cmPortCpdProfileEntry 14 } cmPortCpdProfileBPDUDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00)." ::= { cmPortCpdProfileEntry 15 } cmPortCpdProfilePauseDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames)." ::= { cmPortCpdProfileEntry 16 } cmPortCpdProfileLACPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01)." ::= { cmPortCpdProfileEntry 17 } cmPortCpdProfileLACPMarkerDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02)." ::= { cmPortCpdProfileEntry 18 } cmPortCpdProfileEfmOamDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03)." ::= { cmPortCpdProfileEntry 19 } cmPortCpdProfileSSMDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A)." ::= { cmPortCpdProfileEntry 20 } cmPortCpdProfilePortAuthenDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E)." ::= { cmPortCpdProfileEntry 21 } cmPortCpdProfileBridgeReservedDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F." ::= { cmPortCpdProfileEntry 22 } cmPortCpdProfileLANBridgesDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10)." ::= { cmPortCpdProfileEntry 23 } cmPortCpdProfileGARPGroupDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F." ::= { cmPortCpdProfileEntry 24 } cmPortCpdProfileGMRPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20)." ::= { cmPortCpdProfileEntry 25 } cmPortCpdProfileGVRPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:22)." ::= { cmPortCpdProfileEntry 26 } cmPortCpdProfileGARPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F." ::= { cmPortCpdProfileEntry 27 } cmPortCpdProfileLldpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - each LLDP MAC protocol has its own disposition. Control Protocol Disposition for LLDP." ::= { cmPortCpdProfileEntry 28 } cmPortCpdProfileStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmPortCpdProfileEntry 29 } cmPortCpdProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmCpdProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmCpdProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmCpdProfileRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmPortCpdProfileEntry 30 } cmPortCpdProfileMac00DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:00 Disposition type." ::= { cmPortCpdProfileEntry 31 } cmPortCpdProfileMac01DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:01 Disposition type." ::= { cmPortCpdProfileEntry 32 } cmPortCpdProfileMac02DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:02 Disposition type." ::= { cmPortCpdProfileEntry 33 } cmPortCpdProfileMac03DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:03 Disposition type." ::= { cmPortCpdProfileEntry 34 } cmPortCpdProfileMac04DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:04 Disposition type." ::= { cmPortCpdProfileEntry 35 } cmPortCpdProfileMac05DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:05 Disposition type." ::= { cmPortCpdProfileEntry 36 } cmPortCpdProfileMac06DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:06 Disposition type." ::= { cmPortCpdProfileEntry 37 } cmPortCpdProfileMac07DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:07 Disposition type." ::= { cmPortCpdProfileEntry 38 } cmPortCpdProfileMac08DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:08 Disposition type." ::= { cmPortCpdProfileEntry 39 } cmPortCpdProfileMac09DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:09 Disposition type." ::= { cmPortCpdProfileEntry 40 } cmPortCpdProfileMac0ADispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0A Disposition type." ::= { cmPortCpdProfileEntry 41 } cmPortCpdProfileMac0BDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0B Disposition type." ::= { cmPortCpdProfileEntry 42 } cmPortCpdProfileMac0CDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0C Disposition type." ::= { cmPortCpdProfileEntry 43 } cmPortCpdProfileMac0DDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0D Disposition type." ::= { cmPortCpdProfileEntry 44 } cmPortCpdProfileMac0EDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0E Disposition type." ::= { cmPortCpdProfileEntry 45 } cmPortCpdProfileMac0FDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0F Disposition type." ::= { cmPortCpdProfileEntry 46 } cmPortCpdProfileNearestLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "The nearest lldp Disposition type." ::= { cmPortCpdProfileEntry 47 } cmPortCpdProfileNonTpmrLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "The non tp mr lldp Disposition type." ::= { cmPortCpdProfileEntry 48 } cmPortCpdProfileCustomerLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "The customer lldp Disposition type." ::= { cmPortCpdProfileEntry 49 } cmPortCpdProfileELMIDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "The ELMI Disposition type." ::= { cmPortCpdProfileEntry 50 } -- -- Flow Point Control Protocol Disposition profile Table -- cmFlowPointCpdProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF CmFlowPointCpdProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to System Control Protocol Disposition V3 profile." ::= { cmFacilityObjects 34 } cmFlowPointCpdProfileEntry OBJECT-TYPE SYNTAX CmFlowPointCpdProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmFlowPointCpdProfileTable. These entries represent a Control Protocol Disposition of a flow point filtering criteria of the System." INDEX { cmFlowPointCpdProfileIndex } ::= { cmFlowPointCpdProfileTable 1 } CmFlowPointCpdProfileEntry ::= SEQUENCE { -- Index cmFlowPointCpdProfileIndex Integer32, cmFlowPointCpdProfileName DisplayString, -- Filtering Criteria cmFlowPointCpdProfileCiscoGroupDispType CmControlProtocolDispType, cmFlowPointCpdProfileIslDispType CmControlProtocolDispType, cmFlowPointCpdProfilePagpDispType CmControlProtocolDispType, cmFlowPointCpdProfileUdldDispType CmControlProtocolDispType, cmFlowPointCpdProfileCdpDispType CmControlProtocolDispType, cmFlowPointCpdProfileVtpDispType CmControlProtocolDispType, cmFlowPointCpdProfileDtpDispType CmControlProtocolDispType, cmFlowPointCpdProfilePvstpPlusDispType CmControlProtocolDispType, cmFlowPointCpdProfileUplinkFastDispType CmControlProtocolDispType, cmFlowPointCpdProfileVlanBridgeDispType CmControlProtocolDispType, cmFlowPointCpdProfileL2PTDispType CmControlProtocolDispType, cmFlowPointCpdProfileBridgeGroupDispType CmControlProtocolDispType, cmFlowPointCpdProfileBPDUDispType CmControlProtocolDispType, cmFlowPointCpdProfilePauseDispType CmControlProtocolDispType, cmFlowPointCpdProfileLACPDispType CmControlProtocolDispType, cmFlowPointCpdProfileLACPMarkerDispType CmControlProtocolDispType, cmFlowPointCpdProfileEfmOamDispType CmControlProtocolDispType, cmFlowPointCpdProfileSSMDispType CmControlProtocolDispType, cmFlowPointCpdProfilePortAuthenDispType CmControlProtocolDispType, cmFlowPointCpdProfileBridgeReservedDispType CmControlProtocolDispType, cmFlowPointCpdProfileLANBridgesDispType CmControlProtocolDispType, cmFlowPointCpdProfileGARPGroupDispType CmControlProtocolDispType, cmFlowPointCpdProfileGMRPDispType CmControlProtocolDispType, cmFlowPointCpdProfileGVRPDispType CmControlProtocolDispType, cmFlowPointCpdProfileGARPDispType CmControlProtocolDispType, cmFlowPointCpdProfileLldpDispType CmControlProtocolDispType, cmFlowPointCpdProfileStorageType StorageType, cmFlowPointCpdProfileRowStatus RowStatus, cmFlowPointCpdProfileMac00DispType CmControlProtocolDispType, cmFlowPointCpdProfileMac01DispType CmControlProtocolDispType, cmFlowPointCpdProfileMac02DispType CmControlProtocolDispType, cmFlowPointCpdProfileMac03DispType CmControlProtocolDispType, cmFlowPointCpdProfileMac04DispType CmControlProtocolDispType, cmFlowPointCpdProfileMac05DispType CmControlProtocolDispType, cmFlowPointCpdProfileMac06DispType CmControlProtocolDispType, cmFlowPointCpdProfileMac07DispType CmControlProtocolDispType, cmFlowPointCpdProfileMac08DispType CmControlProtocolDispType, cmFlowPointCpdProfileMac09DispType CmControlProtocolDispType, cmFlowPointCpdProfileMac0ADispType CmControlProtocolDispType, cmFlowPointCpdProfileMac0BDispType CmControlProtocolDispType, cmFlowPointCpdProfileMac0CDispType CmControlProtocolDispType, cmFlowPointCpdProfileMac0DDispType CmControlProtocolDispType, cmFlowPointCpdProfileMac0EDispType CmControlProtocolDispType, cmFlowPointCpdProfileMac0FDispType CmControlProtocolDispType, cmFlowPointCpdProfileNearestLLDPDispType CmControlProtocolDispType, cmFlowPointCpdProfileNonTpmrLLDPDispType CmControlProtocolDispType, cmFlowPointCpdProfileCustomerLLDPDispType CmControlProtocolDispType, cmFlowPointCpdProfileELMIDispType CmControlProtocolDispType } cmFlowPointCpdProfileIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Unique Index value to access the CPD profile row." ::= { cmFlowPointCpdProfileEntry 1 } cmFlowPointCpdProfileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the alias of the cpd V3 profile entry." ::= { cmFlowPointCpdProfileEntry 2 } cmFlowPointCpdProfileCiscoGroupDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting." ::= { cmFlowPointCpdProfileEntry 3 } cmFlowPointCpdProfileIslDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00)." ::= { cmFlowPointCpdProfileEntry 4 } cmFlowPointCpdProfilePagpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104)." ::= { cmFlowPointCpdProfileEntry 5 } cmFlowPointCpdProfileUdldDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111)." ::= { cmFlowPointCpdProfileEntry 6 } cmFlowPointCpdProfileCdpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000)." ::= { cmFlowPointCpdProfileEntry 7 } cmFlowPointCpdProfileVtpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003)." ::= { cmFlowPointCpdProfileEntry 8 } cmFlowPointCpdProfileDtpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004)." ::= { cmFlowPointCpdProfileEntry 9 } cmFlowPointCpdProfilePvstpPlusDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B)." ::= { cmFlowPointCpdProfileEntry 10 } cmFlowPointCpdProfileUplinkFastDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A)." ::= { cmFlowPointCpdProfileEntry 11 } cmFlowPointCpdProfileVlanBridgeDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C)." ::= { cmFlowPointCpdProfileEntry 12 } cmFlowPointCpdProfileL2PTDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0)." ::= { cmFlowPointCpdProfileEntry 13 } cmFlowPointCpdProfileBridgeGroupDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F." ::= { cmFlowPointCpdProfileEntry 14 } cmFlowPointCpdProfileBPDUDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00)." ::= { cmFlowPointCpdProfileEntry 15 } cmFlowPointCpdProfilePauseDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames)." ::= { cmFlowPointCpdProfileEntry 16 } cmFlowPointCpdProfileLACPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01)." ::= { cmFlowPointCpdProfileEntry 17 } cmFlowPointCpdProfileLACPMarkerDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02)." ::= { cmFlowPointCpdProfileEntry 18 } cmFlowPointCpdProfileEfmOamDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03)." ::= { cmFlowPointCpdProfileEntry 19 } cmFlowPointCpdProfileSSMDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A)." ::= { cmFlowPointCpdProfileEntry 20 } cmFlowPointCpdProfilePortAuthenDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E)." ::= { cmFlowPointCpdProfileEntry 21 } cmFlowPointCpdProfileBridgeReservedDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F." ::= { cmFlowPointCpdProfileEntry 22 } cmFlowPointCpdProfileLANBridgesDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10)." ::= { cmFlowPointCpdProfileEntry 23 } cmFlowPointCpdProfileGARPGroupDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F." ::= { cmFlowPointCpdProfileEntry 24 } cmFlowPointCpdProfileGMRPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20)." ::= { cmFlowPointCpdProfileEntry 25 } cmFlowPointCpdProfileGVRPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:22)." ::= { cmFlowPointCpdProfileEntry 26 } cmFlowPointCpdProfileGARPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F." ::= { cmFlowPointCpdProfileEntry 27 } cmFlowPointCpdProfileLldpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - each LLDP MAC protocol has its own disposition. Control Protocol Disposition for LLDP." ::= { cmFlowPointCpdProfileEntry 28 } cmFlowPointCpdProfileStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmFlowPointCpdProfileEntry 29 } cmFlowPointCpdProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmCpdProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmCpdProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmCpdProfileRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmFlowPointCpdProfileEntry 30 } cmFlowPointCpdProfileMac00DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:00 Disposition type." ::= { cmFlowPointCpdProfileEntry 31 } cmFlowPointCpdProfileMac01DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:01 Disposition type." ::= { cmFlowPointCpdProfileEntry 32 } cmFlowPointCpdProfileMac02DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:02 Disposition type." ::= { cmFlowPointCpdProfileEntry 33 } cmFlowPointCpdProfileMac03DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:03 Disposition type." ::= { cmFlowPointCpdProfileEntry 34 } cmFlowPointCpdProfileMac04DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:04 Disposition type." ::= { cmFlowPointCpdProfileEntry 35 } cmFlowPointCpdProfileMac05DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:05 Disposition type." ::= { cmFlowPointCpdProfileEntry 36 } cmFlowPointCpdProfileMac06DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:06 Disposition type." ::= { cmFlowPointCpdProfileEntry 37 } cmFlowPointCpdProfileMac07DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:07 Disposition type." ::= { cmFlowPointCpdProfileEntry 38 } cmFlowPointCpdProfileMac08DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:08 Disposition type." ::= { cmFlowPointCpdProfileEntry 39 } cmFlowPointCpdProfileMac09DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:09 Disposition type." ::= { cmFlowPointCpdProfileEntry 40 } cmFlowPointCpdProfileMac0ADispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0A Disposition type." ::= { cmFlowPointCpdProfileEntry 41 } cmFlowPointCpdProfileMac0BDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0B Disposition type." ::= { cmFlowPointCpdProfileEntry 42 } cmFlowPointCpdProfileMac0CDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0C Disposition type." ::= { cmFlowPointCpdProfileEntry 43 } cmFlowPointCpdProfileMac0DDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0D Disposition type." ::= { cmFlowPointCpdProfileEntry 44 } cmFlowPointCpdProfileMac0EDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0E Disposition type." ::= { cmFlowPointCpdProfileEntry 45 } cmFlowPointCpdProfileMac0FDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0F Disposition type." ::= { cmFlowPointCpdProfileEntry 46 } cmFlowPointCpdProfileNearestLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "The nearest lldp Disposition type." ::= { cmFlowPointCpdProfileEntry 47 } cmFlowPointCpdProfileNonTpmrLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "The non tp mr lldp Disposition type." ::= { cmFlowPointCpdProfileEntry 48 } cmFlowPointCpdProfileCustomerLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "The customer lldp Disposition type." ::= { cmFlowPointCpdProfileEntry 49 } cmFlowPointCpdProfileELMIDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "The ELMI Disposition type." ::= { cmFlowPointCpdProfileEntry 50 } -- -- Ethernet Agg Port CPD Table -- cmEthernetTrafficPortCpdTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetTrafficPortCpdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Port CPD for configuration purposes." ::= { cmFacilityObjects 35 } cmEthernetTrafficPortCpdEntry OBJECT-TYPE SYNTAX CmEthernetTrafficPortCpdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetTrafficPortCpdTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, cmEthernetTrafficPortCpdIndex } ::= { cmEthernetTrafficPortCpdTable 1 } CmEthernetTrafficPortCpdEntry ::= SEQUENCE { -- Port Indices cmEthernetTrafficPortCpdIndex Integer32, cmEthernetTrafficPortAssociatedCpdProfile VariablePointer } cmEthernetTrafficPortCpdIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this CPD Service Entry." ::= { cmEthernetTrafficPortCpdEntry 1 } cmEthernetTrafficPortAssociatedCpdProfile OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "An integer index value used to apply cmCpdProfile configure, corresponding to cmCpdProfileIndex." ::= { cmEthernetTrafficPortCpdEntry 2 } -- -- Ethernet Flow Point CPD Table -- cmEthernetFlowPointCpdTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetFlowPointCpdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Flow Point CPD for configuration purposes." ::= { cmFacilityObjects 36 } cmEthernetFlowPointCpdEntry OBJECT-TYPE SYNTAX CmEthernetFlowPointCpdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetFlowPointCpdTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, cmFlowPointIndex, cmEthernetFlowPointCpdIndex } ::= { cmEthernetFlowPointCpdTable 1 } CmEthernetFlowPointCpdEntry ::= SEQUENCE { -- Port Indices cmEthernetFlowPointCpdIndex Integer32, cmEthernetFlowPointAssociatedCpdProfile VariablePointer } cmEthernetFlowPointCpdIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this CPD Service Entry." ::= { cmEthernetFlowPointCpdEntry 1 } cmEthernetFlowPointAssociatedCpdProfile OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "An integer index value used to apply cmCpdProfile configure, corresponding to cmCpdProfileIndex." ::= { cmEthernetFlowPointCpdEntry 2 } -- Traffic ACL Profile Table cmTrafficAclProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF CmTrafficAclProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to the Traffic Profile Rules Entry. It provides upto 4000 Traffic ACL Rules to be configured." ::= { cmFacilityObjects 37 } cmTrafficAclProfileEntry OBJECT-TYPE SYNTAX CmTrafficAclProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information applicable to a system ACL Profile that can be configured." INDEX { cmTrafficAclProfileIndex } ::= { cmTrafficAclProfileTable 1 } CmTrafficAclProfileEntry ::= SEQUENCE { cmTrafficAclProfileIndex Integer32, cmTrafficAclProfileName DisplayString, cmTrafficAclProfileStorageType StorageType, cmTrafficAclProfileRowStatus RowStatus } cmTrafficAclProfileIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify Traffic ACL profile entry." ::= { cmTrafficAclProfileEntry 1 } cmTrafficAclProfileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the alias of the Acl profile entry." ::= { cmTrafficAclProfileEntry 2 } cmTrafficAclProfileStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmTrafficAclProfileEntry 3 } cmTrafficAclProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmTrafficAclProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmTrafficAclProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmTrafficAclProfileRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmTrafficAclProfileEntry 4 } -- Traffic ACL Rules Table cmTrafficAclRulesTable OBJECT-TYPE SYNTAX SEQUENCE OF CmTrafficAclRulesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to the Traffic ACL Rules Entry." ::= { cmFacilityObjects 38 } cmTrafficAclRulesEntry OBJECT-TYPE SYNTAX CmTrafficAclRulesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information applicable to a system ACL Rules that can be configured." INDEX { cmTrafficAclProfileIndex, cmTrafficAclRulesIndex } ::= { cmTrafficAclRulesTable 1 } CmTrafficAclRulesEntry ::= SEQUENCE { cmTrafficAclRulesIndex Integer32, cmTrafficAclFilterAction CmTrafficAclFilterActionType, cmTrafficAclFilterType CmTrafficAclFilterType, cmTrafficAclEnabled TruthValue, cmTrafficAclSrcMacAddr MacAddress, cmTrafficAclSrcMacAddrEnabled TruthValue, cmTrafficAclDstMacAddr MacAddress, cmTrafficAclDstMacAddrEnabled TruthValue, cmTrafficAclSrcIpFilterEnabled TruthValue, cmTrafficAclDstIpFilterEnabled TruthValue, cmTrafficAclSrcIpV4Addr IpAddress, cmTrafficAclSrcIpV4AddrMask IpAddress, cmTrafficAclDstIpV4Addr IpAddress, cmTrafficAclDstIpV4AddrMask IpAddress, cmTrafficAclSrcIpV6Addr Ipv6Address, cmTrafficAclSrcIpV6AddrMask Ipv6Address, cmTrafficAclDstIpV6Addr Ipv6Address, cmTrafficAclDstIpV6AddrMask Ipv6Address, cmTrafficAclTcpUdpSrcPortNum Integer32, cmTrafficAclTcpUdpSrcPortMask Integer32, cmTrafficAclTcpUdpSrcPortEnabled TruthValue, cmTrafficAclTcpUdpDstPortNum Integer32, cmTrafficAclTcpUdpDstPortMask Integer32, cmTrafficAclTcpUdpDstPortEnabled TruthValue, cmTrafficAclIpQosType CmTrafficACLPriorityType, cmTrafficAclIpQosValue Integer32, cmTrafficAclIpQosTypeEnabled TruthValue, cmTrafficAclVlanId VlanId, cmTrafficAclVlanIdEnabled TruthValue, cmTrafficAclVlanPriority Integer32, cmTrafficAclVlanPriorityEnabled TruthValue, cmTrafficAclProtocolType CmTrafficAclProtocolType, cmTrafficAclProtocolTypeEnabled TruthValue, cmTrafficAclStorageType StorageType, cmTrafficAclRowStatus RowStatus } cmTrafficAclRulesIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify Traffic ACL profile entry. The manager may not assume any particular semantics or meaning to this index, except that it identifies a logical row in the table." ::= { cmTrafficAclRulesEntry 1 } cmTrafficAclFilterAction OBJECT-TYPE SYNTAX CmTrafficAclFilterActionType MAX-ACCESS read-write STATUS current DESCRIPTION "Currently, 'permit' and 'deny' are supported." ::= { cmTrafficAclRulesEntry 2 } cmTrafficAclFilterType OBJECT-TYPE SYNTAX CmTrafficAclFilterType MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the Acl filter type." ::= { cmTrafficAclRulesEntry 3 } cmTrafficAclEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables/disables the Acl entity." ::= { cmTrafficAclRulesEntry 4 } cmTrafficAclSrcMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The source mac address of Acl entry." ::= { cmTrafficAclRulesEntry 5 } cmTrafficAclSrcMacAddrEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables/disables source MAC address of Acl entry." ::= { cmTrafficAclRulesEntry 6 } cmTrafficAclDstMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The destination MAC address of Acl entry." ::= { cmTrafficAclRulesEntry 7 } cmTrafficAclDstMacAddrEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables/disables destination MAC address of Acl entry." ::= { cmTrafficAclRulesEntry 8 } cmTrafficAclSrcIpFilterEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enable/disable Source IPV4 or IPV6 address filter criteria." ::= { cmTrafficAclRulesEntry 9 } cmTrafficAclDstIpFilterEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enable/disable Destination IPV4 or IPV6 address filter criteria." ::= { cmTrafficAclRulesEntry 10 } cmTrafficAclSrcIpV4Addr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The source IP address of Acl entry." ::= { cmTrafficAclRulesEntry 11 } cmTrafficAclSrcIpV4AddrMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The source IP mask of Acl entry." ::= { cmTrafficAclRulesEntry 12 } cmTrafficAclDstIpV4Addr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The destination IP address of Acl entry." ::= { cmTrafficAclRulesEntry 13 } cmTrafficAclDstIpV4AddrMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The destination IP mask of Acl entry." ::= { cmTrafficAclRulesEntry 14 } cmTrafficAclSrcIpV6Addr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "The source IPV6 address of Acl entry." ::= { cmTrafficAclRulesEntry 15 } cmTrafficAclSrcIpV6AddrMask OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "The source IPV6 mask of Acl entry." ::= { cmTrafficAclRulesEntry 16 } cmTrafficAclDstIpV6Addr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "The destination IPV6 address of Acl entry." ::= { cmTrafficAclRulesEntry 17 } cmTrafficAclDstIpV6AddrMask OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "The destination IPV6 mask of Acl entry." ::= { cmTrafficAclRulesEntry 18 } cmTrafficAclTcpUdpSrcPortNum OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes TCP/UDP minimum source port number of Acl entry." ::= { cmTrafficAclRulesEntry 19 } cmTrafficAclTcpUdpSrcPortMask OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes TCP/UDP maximum source port number of Acl entry." ::= { cmTrafficAclRulesEntry 20 } cmTrafficAclTcpUdpSrcPortEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables/disables TCP/UDP source port of Acl entry." ::= { cmTrafficAclRulesEntry 21 } cmTrafficAclTcpUdpDstPortNum OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes TCP/UDP minimum destination port number of Acl entry." ::= { cmTrafficAclRulesEntry 22 } cmTrafficAclTcpUdpDstPortMask OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes TCP/UDP maximum destination port number of Acl entry." ::= { cmTrafficAclRulesEntry 23 } cmTrafficAclTcpUdpDstPortEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables/disables TCP/UDP destination port of Acl entry." ::= { cmTrafficAclRulesEntry 24 } cmTrafficAclIpQosType OBJECT-TYPE SYNTAX CmTrafficACLPriorityType MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes QosType Acl entry." ::= { cmTrafficAclRulesEntry 25 } cmTrafficAclIpQosValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes QOS value of Acl entry." ::= { cmTrafficAclRulesEntry 26 } cmTrafficAclIpQosTypeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables/disables qos type of acl entry." ::= { cmTrafficAclRulesEntry 27 } cmTrafficAclVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the vlan Id of Acl entry." ::= { cmTrafficAclRulesEntry 28 } cmTrafficAclVlanIdEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables/disables Vlan Id of Acl entry." ::= { cmTrafficAclRulesEntry 29 } cmTrafficAclVlanPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the Vlan Priority of Acl entry." ::= { cmTrafficAclRulesEntry 30 } cmTrafficAclVlanPriorityEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables/disables Vlan Priority of Acl entry." ::= { cmTrafficAclRulesEntry 31 } cmTrafficAclProtocolType OBJECT-TYPE SYNTAX CmTrafficAclProtocolType MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes protocol type of Acl entry." ::= { cmTrafficAclRulesEntry 32 } cmTrafficAclProtocolTypeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables/disables protocol type of Acl entry." ::= { cmTrafficAclRulesEntry 33 } cmTrafficAclStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmTrafficAclRulesEntry 34 } cmTrafficAclRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmTrafficAclRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmTrafficAclRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmTrafficAclRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmTrafficAclRulesEntry 35 } --Qos Policer V2 Profile cmQosPolicerProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF CmQosPolicerProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Quality of Service Policer for configuration purposes." ::= { cmFacilityObjects 39 } cmQosPolicerProfileEntry OBJECT-TYPE SYNTAX CmQosPolicerProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmQosPolicerProfileTable. These entries represent a Quality of Service Policer." INDEX { cmQosPolicerProfileIndex } ::= { cmQosPolicerProfileTable 1 } CmQosPolicerProfileEntry ::= SEQUENCE { cmQosPolicerProfileIndex Integer32, cmQosPolicerProfileName DisplayString, cmQosPolicerProfileCIRLo Unsigned32, cmQosPolicerProfileCIRHi Unsigned32, cmQosPolicerProfileEIRLo Unsigned32, cmQosPolicerProfileEIRHi Unsigned32, cmQosPolicerProfileCBS Integer32, cmQosPolicerProfileEBS Integer32, cmQosPolicerProfileColorMode PolicerColorMode, cmQosPolicerProfileCouplingFlag TruthValue, cmQosPolicerProfileStorageType StorageType, cmQosPolicerProfileRowStatus RowStatus } cmQosPolicerProfileIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the Policer profile ID. Up to 1000 profiles can be specified per system." ::= { cmQosPolicerProfileEntry 1 } cmQosPolicerProfileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the alias for this profile" ::= { cmQosPolicerProfileEntry 2 } cmQosPolicerProfileCIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Commited Information Rate(CIR) on Policer Profile. This represents the lower 32 bits of the CIR." ::= { cmQosPolicerProfileEntry 3 } cmQosPolicerProfileCIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Commited Information Rate(CIR) on Policer Profile. This represents the upper 32 bits of the CIR." ::= { cmQosPolicerProfileEntry 4 } cmQosPolicerProfileEIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Excess Information Rate(EIR) on the Policer Profile. This represents the lower 32 bits of the EIR." ::= { cmQosPolicerProfileEntry 5 } cmQosPolicerProfileEIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Excess Information Rate(EIR) on the Policer Profile. This represents the upper 32 bits of the EIR." ::= { cmQosPolicerProfileEntry 6 } cmQosPolicerProfileCBS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Commited Burst Size (CBS) on Policer Profile." ::= { cmQosPolicerProfileEntry 7 } cmQosPolicerProfileEBS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Excess Burst Size (EBS) on the Policer Profile." ::= { cmQosPolicerProfileEntry 8 } cmQosPolicerProfileColorMode OBJECT-TYPE SYNTAX PolicerColorMode MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'." ::= { cmQosPolicerProfileEntry 9 } cmQosPolicerProfileCouplingFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow, which is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level." ::= { cmQosPolicerProfileEntry 10 } cmQosPolicerProfileStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmQosPolicerProfileEntry 11 } cmQosPolicerProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosPolicerProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosPolicerProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosPolicerProfileRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmQosPolicerProfileEntry 12 } --Qos Queue Profile cmQosQueueProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF CmQosQueueProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Quality of Service Queue for configuration purposes." ::= { cmFacilityObjects 40 } cmQosQueueProfileEntry OBJECT-TYPE SYNTAX CmQosQueueProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmQosQueueProfileTable. These entries represent a Quality of Service Queue." INDEX { cmQosQueueProfileIndex } ::= { cmQosQueueProfileTable 1 } CmQosQueueProfileEntry ::= SEQUENCE { cmQosQueueProfileIndex Integer32, cmQosQueueProfileName DisplayString, cmQosQueueProfileBufferSize Integer32, cmQosQueueProfileREDEnabled TruthValue, cmQosQueueProfileStorageType StorageType, cmQosQueueProfileRowStatus RowStatus } cmQosQueueProfileIndex OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the Queue profile ID. Up to 64 profiles can be specified per system." ::= { cmQosQueueProfileEntry 1 } cmQosQueueProfileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the alias for this profile" ::= { cmQosQueueProfileEntry 2 } cmQosQueueProfileBufferSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the buffer size of the selected queues." ::= { cmQosQueueProfileEntry 3 } cmQosQueueProfileREDEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines whether the WRED is enabled as congestion algorithm or not. If disabled, then the following RED parameters (cmQueueProfileWREDDp0MinTh, cmQueueProfileWREDDp0MaxTh and cmQueueProfileWREDDp0MaxProb) must not be specified." ::= { cmQosQueueProfileEntry 4 } cmQosQueueProfileStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmQosQueueProfileEntry 5 } cmQosQueueProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosQueueProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosQueueProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosQueueProfileRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmQosQueueProfileEntry 6 } --FlowPoint Policer cmQosPolicerV2Table OBJECT-TYPE SYNTAX SEQUENCE OF CmQosPolicerV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Quality of Service Policer for configuration purposes." ::= { cmFacilityObjects 41 } cmQosPolicerV2Entry OBJECT-TYPE SYNTAX CmQosPolicerV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmQosPolicerV2Table. These entries represent a Quality of Service Policer." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, cmFlowPointIndex, cmQosPolicerV2Index } ::= { cmQosPolicerV2Table 1 } CmQosPolicerV2Entry ::= SEQUENCE { cmQosPolicerV2Index Integer32, -- State Management params cmQosPolicerV2AdminState AdminState, cmQosPolicerV2OperationalState OperationalState, cmQosPolicerV2SecondaryState SecondaryState, cmQosPolicerV2ColorMarkingEnabled TruthValue, cmQosPolicerV2AssociatedProfile VariablePointer, cmQosPolicerV2StorageType StorageType, cmQosPolicerV2RowStatus RowStatus, cmQosPolicerV2PolicingEnabled TruthValue } cmQosPolicerV2Index OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The Policer Index that represents the COS level. Index 1 represents COS 0; Index 2 represents COS 1 and so on." ::= { cmQosPolicerV2Entry 1 } -- State Management params cmQosPolicerV2AdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the QOS Policer." ::= { cmQosPolicerV2Entry 2 } cmQosPolicerV2OperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the QOS Policer." ::= { cmQosPolicerV2Entry 3 } cmQosPolicerV2SecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the QOS Policer." ::= { cmQosPolicerV2Entry 4 } cmQosPolicerV2ColorMarkingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the colorMarking state of the QOS Policer." ::= { cmQosPolicerV2Entry 5 } cmQosPolicerV2AssociatedProfile OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This object define the queue profile ID to be used, it is associated with the cmQosPolicerProfileIndex." ::= { cmQosPolicerV2Entry 6 } cmQosPolicerV2StorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmQosPolicerV2Entry 7 } cmQosPolicerV2RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosPolicerV2RowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosPolicerV2RowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosPolicerV2RowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmQosPolicerV2Entry 8 } cmQosPolicerV2PolicingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether enable or disable the functionality of policing for this COS." ::= { cmQosPolicerV2Entry 9 } --FlowPoint Queue cmQosShaperV2Table OBJECT-TYPE SYNTAX SEQUENCE OF CmQosShaperV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Quality of Service ShaperV2 for configuration purposes." ::= { cmFacilityObjects 42 } cmQosShaperV2Entry OBJECT-TYPE SYNTAX CmQosShaperV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmQosShaperV2Table. These entries represent a Quality of Service Shaper." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, cmFlowPointIndex, cmQosShaperV2Index } ::= { cmQosShaperV2Table 1 } CmQosShaperV2Entry ::= SEQUENCE { cmQosShaperV2Index Integer32, -- State Management params cmQosShaperV2AdminState AdminState, cmQosShaperV2OperationalState OperationalState, cmQosShaperV2SecondaryState SecondaryState, cmQosShaperV2AssociatedQueueProfile VariablePointer, --cmQosShaperV2BufferSize Integer32, cmQosShaperV2CIRLo Unsigned32, cmQosShaperV2CIRHi Unsigned32, cmQosShaperV2EIRLo Unsigned32, cmQosShaperV2EIRHi Unsigned32, -- cmQosShaperV2REDEnabled TruthValue, cmQosShaperV2IngressAverageFrameSize Integer32, cmQosShaperV2StorageType StorageType, cmQosShaperV2RowStatus RowStatus, cmQosShaperV2AdditionalCIRLo Unsigned32, cmQosShaperV2AdditionalCIRHi Unsigned32, cmQosShaperV2WFQWeight Integer32, cmQosShaperV2ActualCIR Counter64, cmQosShaperV2ActualEIR Counter64, cmQosShaperV2LowLatencyControl TruthValue } cmQosShaperV2Index OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The ShaperV2 Index that represents the COS level. Index 1 represents COS 0; Index 2 represents COS 1 and so on." ::= { cmQosShaperV2Entry 1 } -- State Management params cmQosShaperV2AdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the QOS Shaper." ::= { cmQosShaperV2Entry 2 } cmQosShaperV2OperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the QOS ShaperV2." ::= { cmQosShaperV2Entry 3 } cmQosShaperV2SecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the QOS QosShaperV2." ::= { cmQosShaperV2Entry 4 } cmQosShaperV2AssociatedQueueProfile OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the queue profile ID to be used, it is associated with the cmQosQueueProfileIndex." ::= { cmQosShaperV2Entry 5 } --cmQosShaperV2BufferSize OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "This object defines the buffer size of ShaperV2." -- ::= { cmQosShaperV2Entry 6 } cmQosShaperV2CIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Lower 32 bits of CIR." ::= { cmQosShaperV2Entry 6 } cmQosShaperV2CIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Higher 32 bits of CIR." ::= { cmQosShaperV2Entry 7 } cmQosShaperV2EIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Lower 32 bits of EIR." ::= { cmQosShaperV2Entry 8 } cmQosShaperV2EIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Higher 32 bits of EIR." ::= { cmQosShaperV2Entry 9 } cmQosShaperV2IngressAverageFrameSize OBJECT-TYPE SYNTAX Integer32 (64..9600) MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the average frame size for accounting for Meter/Shaping." ::= { cmQosShaperV2Entry 10 } --cmQosShaperV2REDEnabled OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "This object specifies RED of ShaperV2." -- ::= { cmQosShaperV2Entry 11 } cmQosShaperV2StorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmQosShaperV2Entry 11 } cmQosShaperV2RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmQosShaperV2RowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmQosShaperV2RowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmQosShaperV2RowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmQosShaperV2Entry 12 } cmQosShaperV2AdditionalCIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Lower 32 bits of additional CIR." ::= { cmQosShaperV2Entry 13 } cmQosShaperV2AdditionalCIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Higher 32 bits of additional CIR." ::= { cmQosShaperV2Entry 14 } cmQosShaperV2WFQWeight OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS read-write STATUS current DESCRIPTION "Weight of queue to be scheduled by WFQ mechanism." ::= { cmQosShaperV2Entry 15 } cmQosShaperV2ActualCIR OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the actual CIR." ::= { cmQosShaperV2Entry 16 } cmQosShaperV2ActualEIR OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the actual EIR." ::= { cmQosShaperV2Entry 17 } cmQosShaperV2LowLatencyControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies low latency control whether enabled." ::= { cmQosShaperV2Entry 18 } --Lag Shaper cmTrafficPortQosShaperTable OBJECT-TYPE SYNTAX SEQUENCE OF CmTrafficPortQosShaperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Quality of Service Shaper for configuration purposes." ::= { cmFacilityObjects 43 } cmTrafficPortQosShaperEntry OBJECT-TYPE SYNTAX CmTrafficPortQosShaperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmTrafficPortQosShaperTable. These entries represent a Quality of Service Shaper." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, cmTrafficPortQosShaperIndex } ::= { cmTrafficPortQosShaperTable 1 } CmTrafficPortQosShaperEntry ::= SEQUENCE { cmTrafficPortQosShaperIndex Integer32, -- State Management params cmTrafficPortQosShaperAdminState AdminState, cmTrafficPortQosShaperOperationalState OperationalState, cmTrafficPortQosShaperSecondaryState SecondaryState, cmTrafficPortQosShaperAssociatedQueueProfile VariablePointer, cmTrafficPortQosShaperBufferSize Integer32, cmTrafficPortQosShaperCIRLo Unsigned32, cmTrafficPortQosShaperCIRHi Unsigned32, cmTrafficPortQosShaperEIRLo Unsigned32, cmTrafficPortQosShaperEIRHi Unsigned32, --cmTrafficPortQosShaperREDEnabled TruthValue, cmTrafficPortQosShaperStorageType StorageType, cmTrafficPortQosShaperRowStatus RowStatus, cmTrafficPortQosShaperIngressAverageFrameSize Integer32, cmTrafficPortQosShaperAdditionalCIRLo Unsigned32, cmTrafficPortQosShaperAdditionalCIRHi Unsigned32, cmTrafficPortQosShaperWfqWeight Integer32 } cmTrafficPortQosShaperIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The ShaperV2 Index that represents the COS level. Index 1 represents COS 0; Index 2 represents COS 1 and so on." ::= { cmTrafficPortQosShaperEntry 1 } -- State Management params cmTrafficPortQosShaperAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the QOS Shaper." ::= { cmTrafficPortQosShaperEntry 2 } cmTrafficPortQosShaperOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the QOS ShaperV2." ::= { cmTrafficPortQosShaperEntry 3 } cmTrafficPortQosShaperSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the QOS LagQosShaper." ::= { cmTrafficPortQosShaperEntry 4 } cmTrafficPortQosShaperAssociatedQueueProfile OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the queue profile ID to be used, it is associated with the cmQosQueueProfileIndex." ::= { cmTrafficPortQosShaperEntry 5 } cmTrafficPortQosShaperBufferSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the buffer size of Shaper." ::= { cmTrafficPortQosShaperEntry 6 } cmTrafficPortQosShaperCIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Lower 32 bits of CIR." ::= { cmTrafficPortQosShaperEntry 7 } cmTrafficPortQosShaperCIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Higher 32 bits of CIR." ::= { cmTrafficPortQosShaperEntry 8 } cmTrafficPortQosShaperEIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Lower 32 bits of EIR." ::= { cmTrafficPortQosShaperEntry 9 } cmTrafficPortQosShaperEIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Higher 32 bits of EIR." ::= { cmTrafficPortQosShaperEntry 10 } --cmTrafficPortQosShaperREDEnabled OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "This object specifies RED of Port Shaper." -- ::= { cmTrafficPortQosShaperEntry 11 } cmTrafficPortQosShaperStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmTrafficPortQosShaperEntry 11 } cmTrafficPortQosShaperRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmTrafficPortQosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmTrafficPortQosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmTrafficPortQosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmTrafficPortQosShaperEntry 12 } cmTrafficPortQosShaperIngressAverageFrameSize OBJECT-TYPE SYNTAX Integer32 (64..9600) MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the average frame size for accounting for Meter/Shaping." ::= { cmTrafficPortQosShaperEntry 13 } cmTrafficPortQosShaperAdditionalCIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Lower 32 bits of additional CIR." ::= { cmTrafficPortQosShaperEntry 14 } cmTrafficPortQosShaperAdditionalCIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the Higher 32 bits of additional CIR." ::= { cmTrafficPortQosShaperEntry 15 } cmTrafficPortQosShaperWfqWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the wfq weight value of the QoS shaper." ::= { cmTrafficPortQosShaperEntry 16 } cmTrafficAclRscAllocation OBJECT-TYPE SYNTAX CmAclConfiguration MAX-ACCESS read-write STATUS current DESCRIPTION "This object is defined to set traffic acl resource allocation. Supported actions are: all-bk-l2(1) - all bank allocated to l2. all-bk-l2-ipv4(2) - all bank allocated to l2/ipv4. two-bk-l2-ipv4(3) - two thirds allocated to l2/ipv4, the left belongs to ipv6. one-bk-l2-ipv4(4) - one thirds allocated to l2/ipv4, the left belongs to ipv6. none-bk-l2-ipv4(5) - all bank allocated to ipv6. " ::= { cmFacilityObjects 44 } -- -- Ethernet Network Port Quality of Service Shaper -- f3NetPortQosShaperTable OBJECT-TYPE SYNTAX SEQUENCE OF F3NetPortQosShaperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Network Port Quality of Service Shaper for configuration purposes. These shapers can be managed when the Network Port is in evpl mode and are relevant for traffic in the access to network direction." ::= { cmFacilityObjects 45 } f3NetPortQosShaperEntry OBJECT-TYPE SYNTAX F3NetPortQosShaperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3NetPortQosShaperTable. These entries represent a Quality of Service Shaper." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex, f3NetPortQosShaperIndex } ::= { f3NetPortQosShaperTable 1 } F3NetPortQosShaperEntry ::= SEQUENCE { -- QOS Shaper Index/Id f3NetPortQosShaperIndex Integer32, f3NetPortQosShaperDirection TrafficDirection, -- State Management params f3NetPortQosShaperAdminState AdminState, f3NetPortQosShaperOperationalState OperationalState, f3NetPortQosShaperSecondaryState SecondaryState, -- QOS Shaper Properties f3NetPortQosShaperCIRLo Unsigned32, f3NetPortQosShaperCIRHi Unsigned32, f3NetPortQosShaperEIRLo Unsigned32, f3NetPortQosShaperEIRHi Unsigned32, f3NetPortQosShaperCBS Unsigned32, f3NetPortQosShaperEBS Unsigned32, f3NetPortQosShaperBufferSize Unsigned32, f3NetPortQosShaperCOS Integer32, f3NetPortQosShaperSoamCIRLo Unsigned32, f3NetPortQosShaperSoamCIRHi Unsigned32, f3NetPortQosShaperSoamEIRLo Unsigned32, f3NetPortQosShaperSoamEIRHi Unsigned32, --wred threshold f3NetPortQosShaperWredGreenMinQueueThreshold Unsigned32, f3NetPortQosShaperWredGreenMaxQueueThreshold Unsigned32, f3NetPortQosShaperWredGreenDropProbability Unsigned32, f3NetPortQosShaperWredYellowMinQueueThreshold Unsigned32, f3NetPortQosShaperWredYellowMaxQueueThreshold Unsigned32, f3NetPortQosShaperWredYellowDropProbability Unsigned32, f3NetPortQosShaperAvgFrameSizeBeforeFragment Integer32, f3NetPortQosShaperWfqWeight Integer32 } f3NetPortQosShaperIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The unique integer index value corresponding to a Quality of Service Shaper." ::= { f3NetPortQosShaperEntry 1 } f3NetPortQosShaperDirection OBJECT-TYPE SYNTAX TrafficDirection MAX-ACCESS read-only STATUS current DESCRIPTION "The direction of the Quality of Service Shaper." ::= { f3NetPortQosShaperEntry 2 } -- State Management params f3NetPortQosShaperAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the QOS Shaper." ::= { f3NetPortQosShaperEntry 3 } f3NetPortQosShaperOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the QOS Shaper." ::= { f3NetPortQosShaperEntry 4 } f3NetPortQosShaperSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the QOS Shaper." ::= { f3NetPortQosShaperEntry 5 } f3NetPortQosShaperCIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Information Rate(CIR) (Lower 32 bits)of a Shaper." ::= { f3NetPortQosShaperEntry 6 } f3NetPortQosShaperCIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Information Rate(CIR) (Higher 32 bits) of a Shaper." ::= { f3NetPortQosShaperEntry 7 } f3NetPortQosShaperEIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper." ::= { f3NetPortQosShaperEntry 8 } f3NetPortQosShaperEIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper." ::= { f3NetPortQosShaperEntry 9 } f3NetPortQosShaperCBS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Burst Size (CBS) of the Shaper." ::= { f3NetPortQosShaperEntry 10 } f3NetPortQosShaperEBS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Burst Size (EBS) of the Shaper." ::= { f3NetPortQosShaperEntry 11 } f3NetPortQosShaperBufferSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Buffer Size of the Shaper." ::= { f3NetPortQosShaperEntry 12 } f3NetPortQosShaperCOS OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the COS (Class of Service) value for the QOS Shaper." ::= { f3NetPortQosShaperEntry 13 } f3NetPortQosShaperSoamCIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Soam Commited Information Rate(SOAM-CIR) (Lower 32 bits)of a Shaper." ::= { f3NetPortQosShaperEntry 14 } f3NetPortQosShaperSoamCIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Soam Commited Information Rate(SOAM-CIR) (Higher 32 bits) of a Shaper." ::= { f3NetPortQosShaperEntry 15 } f3NetPortQosShaperSoamEIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper." ::= { f3NetPortQosShaperEntry 16 } f3NetPortQosShaperSoamEIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper." ::= { f3NetPortQosShaperEntry 17 } f3NetPortQosShaperWredGreenMinQueueThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred green packet min queue threshold value." ::= { f3NetPortQosShaperEntry 18 } f3NetPortQosShaperWredGreenMaxQueueThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred green packet max queue threshold value." ::= { f3NetPortQosShaperEntry 19 } f3NetPortQosShaperWredGreenDropProbability OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred green packet drop probability." ::= { f3NetPortQosShaperEntry 20 } f3NetPortQosShaperWredYellowMinQueueThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred yellow packet min queue threshold value." ::= { f3NetPortQosShaperEntry 21 } f3NetPortQosShaperWredYellowMaxQueueThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred yellow packet max queue threshold value." ::= { f3NetPortQosShaperEntry 22 } f3NetPortQosShaperWredYellowDropProbability OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred yellow packet drop probability." ::= { f3NetPortQosShaperEntry 23 } f3NetPortQosShaperAvgFrameSizeBeforeFragment OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the average frame size before fragmentation." ::= { f3NetPortQosShaperEntry 24 } f3NetPortQosShaperWfqWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the wfq weight value." ::= { f3NetPortQosShaperEntry 25 } -- -- ge dcn port table -- f3Usb3GDCNPortTable OBJECT-TYPE SYNTAX SEQUENCE OF F3Usb3GDCNPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "3G DCN Port table. The table contains parameters of 3G USB modem." ::= { cmFacilityObjects 46 } f3Usb3GDCNPortEntry OBJECT-TYPE SYNTAX F3Usb3GDCNPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3Usb3GDCNPortTable." INDEX { neIndex, shelfIndex, slotIndex, f3UsbHostIndex } ::= { f3Usb3GDCNPortTable 1 } F3Usb3GDCNPortEntry ::= SEQUENCE { f3Usb3GDCNPortIndex Integer32, f3Usb3GDCNPortIfIndex InterfaceIndex, f3Usb3GDCNPortEntityIndex PhysicalIndex, f3Usb3GDCNPortAdminState AdminState, f3Usb3GDCNPortOperationalState OperationalState, f3Usb3GDCNPortSecondaryState SecondaryState, f3Usb3GDCNPortVendorName DisplayString, f3Usb3GDCNPortModel DisplayString, f3Usb3GDCNPortFSN DisplayString, f3Usb3GDCNPortIMEI DisplayString, f3Usb3GDCNPortHardwareVersion DisplayString, f3Usb3GDCNPortFirmwareVersion DisplayString, f3Usb3GDCNPortSIMStatus F3Usb3GSimCardState, f3Usb3GDCNPortPINLeftChances Integer32, f3Usb3GDCNPortPUKLeftChances Integer32, f3Usb3GDCNPortConnectionStatus F3Usb3GNetworkConnectionState, f3Usb3GDCNPortRSSI F3Usb3GRecvSignalStrengthInd, f3Usb3GDCNPortSpeed Integer32, f3Usb3GDCNPortMTU Integer32, f3Usb3GDCNPortProviderName DisplayString, f3Usb3GDCNPortDNS1 IpAddress, f3Usb3GDCNPortDNS2 IpAddress, f3Usb3GDCNPortAPN DisplayString, f3Usb3GDCNPortUserName DisplayString, f3Usb3GDCNPortPassword DisplayString, f3Usb3GDCNPortDailNumber DisplayString, f3Usb3GDCNPortRedialTimer Integer32, f3Usb3GDCNPortCurrentPinCode DisplayString, f3Usb3GDCNPortNewPinCode DisplayString, f3Usb3GDCNPortConfirmPinCode DisplayString, f3Usb3GDCNPortCurrentPukCode DisplayString, f3Usb3GDCNPINCodeAction F3Usb3GDCNPINCodeActionType, f3Usb3GDCNPortStorageType StorageType, f3Usb3GDCNPortRowStatus RowStatus, f3Usb3GDCNPortIMSI DisplayString, f3Usb3GDCNPortPINStatus G3AuthStatus, f3UsbDCNPortMobileNetworkType UsbDCNMobileNetworkType, f3Usb3GDCNMuxOperationalMode UsbOperationalMode, f3Usb3GDCNPortIpAddress IpAddress, f3Usb3GDCNPortNetMask IpAddress } f3Usb3GDCNPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this Ethernet Access Port within a card. Note that each Ethernet Access Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, f3Usb3GDCNPortIndex" ::= { f3Usb3GDCNPortEntry 1 } f3Usb3GDCNPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the same value as ifIndex for G3 DCN Port. An integer index value used to uniquely identify this G3 DCN Port." ::= { f3Usb3GDCNPortEntry 2 } f3Usb3GDCNPortEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Entity Index from ENTITY-MIB for this port." ::= { f3Usb3GDCNPortEntry 3 } f3Usb3GDCNPortAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 4 } f3Usb3GDCNPortOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 5 } f3Usb3GDCNPortSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 6 } f3Usb3GDCNPortVendorName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Vendor Name of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 7 } f3Usb3GDCNPortModel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Model of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 8 } f3Usb3GDCNPortFSN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Factory Serial Number of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 9 } f3Usb3GDCNPortIMEI OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the International Mobile Equipment Identity of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 10 } f3Usb3GDCNPortHardwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Hardware Version of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 11 } f3Usb3GDCNPortFirmwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Firmware Version of the G3 DCN Port.." ::= { f3Usb3GDCNPortEntry 12 } f3Usb3GDCNPortSIMStatus OBJECT-TYPE SYNTAX F3Usb3GSimCardState MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SIM card Status of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 13 } f3Usb3GDCNPortPINLeftChances OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Left Chances for PIN input of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 14 } f3Usb3GDCNPortPUKLeftChances OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Left Chances for PUK input of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 15 } f3Usb3GDCNPortConnectionStatus OBJECT-TYPE SYNTAX F3Usb3GNetworkConnectionState MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Wirless Connection Status of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 16 } f3Usb3GDCNPortRSSI OBJECT-TYPE SYNTAX F3Usb3GRecvSignalStrengthInd MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Received Signal Strength Indication of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 17 } f3Usb3GDCNPortSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Connection Speed of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 18 } f3Usb3GDCNPortMTU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the MTU of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 19 } f3Usb3GDCNPortProviderName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Wireless Service Provider Name of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 20 } f3Usb3GDCNPortDNS1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This first DNS of the interface." ::= { f3Usb3GDCNPortEntry 21 } f3Usb3GDCNPortDNS2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This second DNS of the interface." ::= { f3Usb3GDCNPortEntry 22 } f3Usb3GDCNPortAPN OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows configure the Access Point Name of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 23 } f3Usb3GDCNPortUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows configure the User Name of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 24 } f3Usb3GDCNPortPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows configure the Password of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 25 } f3Usb3GDCNPortDailNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows configure the Dail Number of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 26 } f3Usb3GDCNPortRedialTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows configure the Retail Timer of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 27 } f3Usb3GDCNPortCurrentPinCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is the Current Pin Code." ::= { f3Usb3GDCNPortEntry 28 } f3Usb3GDCNPortNewPinCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is the New Pin code." ::= { f3Usb3GDCNPortEntry 29 } f3Usb3GDCNPortConfirmPinCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is the Confirm Pin Code." ::= { f3Usb3GDCNPortEntry 30 } f3Usb3GDCNPortCurrentPukCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object is the Current Puk Code." ::= { f3Usb3GDCNPortEntry 31 } f3Usb3GDCNPINCodeAction OBJECT-TYPE SYNTAX F3Usb3GDCNPINCodeActionType MAX-ACCESS read-create STATUS current DESCRIPTION "This Action is for PIN code operation." ::= { f3Usb3GDCNPortEntry 32 } f3Usb3GDCNPortStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3Usb3GDCNPortEntry 33 } f3Usb3GDCNPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row. The f3Usb3GDCNPortRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3)." ::= { f3Usb3GDCNPortEntry 34 } f3Usb3GDCNPortIMSI OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the International Mobile Subscriber Identity of the G3 DCN Port." ::= { f3Usb3GDCNPortEntry 35 } f3Usb3GDCNPortPINStatus OBJECT-TYPE SYNTAX G3AuthStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This status of PIN/PUK" ::= { f3Usb3GDCNPortEntry 36 } f3UsbDCNPortMobileNetworkType OBJECT-TYPE SYNTAX UsbDCNMobileNetworkType MAX-ACCESS read-only STATUS current DESCRIPTION "This object describe the mobile network type." ::= { f3Usb3GDCNPortEntry 37 } f3Usb3GDCNMuxOperationalMode OBJECT-TYPE SYNTAX UsbOperationalMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe the USB operatioan mode." ::= { f3Usb3GDCNPortEntry 38 } f3Usb3GDCNPortIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of this port." ::= { f3Usb3GDCNPortEntry 39 } f3Usb3GDCNPortNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP subnet mask of this port." ::= { f3Usb3GDCNPortEntry 40 } -- -- For tdm tables -- -- -- OCn/STM Table -- ocnStmTable OBJECT-TYPE SYNTAX SEQUENCE OF OcnStmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to OCn/STM interface." ::= { cmFacilityObjects 47 } ocnStmEntry OBJECT-TYPE SYNTAX OcnStmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the ocnStmTable." INDEX { neIndex, shelfIndex, slotIndex, ocnStmIndex } ::= { ocnStmTable 1 } OcnStmEntry ::= SEQUENCE { ocnStmIndex Integer32, ocnStmIfIndex InterfaceIndex, ocnStmEntityIndex PhysicalIndex, ocnStmAdminState AdminState, ocnStmOperationalState OperationalState, ocnStmSecondaryState SecondaryState, ocnStmSfpVendorName DisplayString, ocnStmSfpPartNumber DisplayString, ocnStmSfpSerialNumber DisplayString, ocnStmSfpDateOfManufacture DateAndTime, ocnStmSfpConnectorValue SfpConnectorValue, ocnStmSfpLinkLength Integer32, ocnStmSfpLaserWaveLength Integer32, ocnStmSfpLaserWaveLengthPicometer Unsigned32, ocnStmSfpMediaType SfpMediaType, ocnStmMultiplexingStructures MultiplexingStructure, ocnStmEoTDMMode EoTDMMode, ocnStmLoopbackConfig CmLoopbackType, ocnStmLoopbackStatus CmLoopbackType, ocnStmLoopbackTime Integer32, ocnStmInsertingAIS TruthValue, ocnStmBerExcThreshold BitErrRate, ocnStmBerDegThreshold BitErrRate, ocnStmRxTrailTrace DisplayString, ocnStmTxTrailTrace DisplayString, ocnStmExpectedTrailTrace DisplayString, ocnStmTrailTraceFormat TrailTraceFormat, ocnStmQLModeEnabled TruthValue, ocnStmExpectedQL SSMQualityLevel, ocnStmAssumedQL SSMQualityLevel, ocnStmReceivedQL SSMQualityLevel, ocnStmTransmitQL SSMQualityLevel, ocnStmPortType OCNSTMPortType, ocnStmFreqSourceType TDMFrequencySourceType, ocnStmHighOrderPathType TDMPathType, ocnStmSfpName DisplayString, ocnStmSfpHardwareRevision DisplayString } ocnStmIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique index value associated with the OCn/STM interface." ::= { ocnStmEntry 1 } ocnStmIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the same value as ifIndex for OCn/STM interface. An integer index value used to uniquely identify this OCn/STM interface." ::= { ocnStmEntry 2 } ocnStmEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Entity Index from ENTITY-MIB for this OCn/STM interface." ::= { ocnStmEntry 3 } ocnStmAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the OCn/STM interface." ::= { ocnStmEntry 4 } ocnStmOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the OCn/STM interface." ::= { ocnStmEntry 5 } ocnStmSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the OCn/STM interface." ::= { ocnStmEntry 6 } ocnStmSfpVendorName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the vendor name of the SFP." ::= { ocnStmEntry 7 } ocnStmSfpPartNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the part number of the SFP." ::= { ocnStmEntry 8 } ocnStmSfpSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the serial number of the SFP." ::= { ocnStmEntry 9 } ocnStmSfpDateOfManufacture OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the date of manufacture of the SFP." ::= { ocnStmEntry 10 } ocnStmSfpConnectorValue OBJECT-TYPE SYNTAX SfpConnectorValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP connector value." ::= { ocnStmEntry 11 } ocnStmSfpLinkLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP Link Length." ::= { ocnStmEntry 12 } ocnStmSfpLaserWaveLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP Laser Wave Length in nano meters." ::= { ocnStmEntry 13 } ocnStmSfpLaserWaveLengthPicometer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provide laser wavelength pico value. For example, laser wavelength is 1510.01, then ocnStmSfpLaserWaveLength=1510 and ocnStmSfpLaserWaveLengthPicometer=10." ::= { ocnStmEntry 14 } ocnStmSfpMediaType OBJECT-TYPE SYNTAX SfpMediaType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the SFP Media Type." ::= { ocnStmEntry 15 } ocnStmMultiplexingStructures OBJECT-TYPE SYNTAX MultiplexingStructure MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the TDM Multiplexing Structure base on OCn/STM interface." ::= { ocnStmEntry 16 } ocnStmEoTDMMode OBJECT-TYPE SYNTAX EoTDMMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the TDM Mode base on OCn/STM interface. EoPDH means VCG container is PDH; EoTDM means VCG container is VC of SDH/SONET" ::= { ocnStmEntry 17 } ocnStmLoopbackConfig OBJECT-TYPE SYNTAX CmLoopbackType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to initiate loopbacks on on the OCn/STM interface." ::= { ocnStmEntry 18 } ocnStmLoopbackStatus OBJECT-TYPE SYNTAX CmLoopbackType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides status of the current loopback on the OCn/STM interface." ::= { ocnStmEntry 19 } ocnStmLoopbackTime OBJECT-TYPE SYNTAX Integer32 (2..300) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify time for timed-loopbacks on on the OCn/STM interface." ::= { ocnStmEntry 20 } ocnStmInsertingAIS OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to insert AIS-L out from OCn/STM interface when it is in maintenance state." ::= { ocnStmEntry 21 } ocnStmBerExcThreshold OBJECT-TYPE SYNTAX BitErrRate MAX-ACCESS read-write STATUS current DESCRIPTION "This object provide the threshold of B2EXC." ::= { ocnStmEntry 22 } ocnStmBerDegThreshold OBJECT-TYPE SYNTAX BitErrRate MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the threshold of B2DEG." ::= { ocnStmEntry 23 } ocnStmRxTrailTrace OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the recevied J0 on the OCn/STM interface." ::= { ocnStmEntry 24 } ocnStmTxTrailTrace OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the transmit J0 on the OCn/STM interface." ::= { ocnStmEntry 25 } ocnStmExpectedTrailTrace OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the expected J0 on the OCn/STM interface." ::= { ocnStmEntry 26 } ocnStmTrailTraceFormat OBJECT-TYPE SYNTAX TrailTraceFormat MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the J0 length mode on the OCn/STM interface." ::= { ocnStmEntry 27 } ocnStmQLModeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify whether the OCn/STM interface can be enabled/disabled for QL Mode. This object is only applicable for Synchronous OCn/STM interface, when ocnStmQLModeEnabled is set to true. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs." ::= { ocnStmEntry 28 } ocnStmExpectedQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the expected QL when the OCn/STM interface is enabled for QL Mode. This object is only applicable for Synchronous OCn/STM interface, when ocnStmQLModeEnabled is set to true. This object allows the user to set a minimum expected received Quality Level on the port. The valid values depend upon the SYNC entity Network Clock Type. A value of None represents that a minimum Quality Level is not expected. The default value shall be None." ::= { ocnStmEntry 29 } ocnStmAssumedQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify the assumed QL on the OCn/STM interface. This object is only applicable for Synchronous OCn/STM interface. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 and the port TransmitQL Mode is disabled and the port is being used as an input reference source. Under these conditions, the specified QL value is assumed to be the Quality Level of the non-failed reference." ::= { ocnStmEntry 30 } ocnStmReceivedQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Received QL value for the OCn/STM interface. If the OCn/STM interface TransmitQL Mode is disabled, then the received QL value is not applicable.This object is only applicable for Synchronous OCn/STM interface." ::= { ocnStmEntry 31 } ocnStmTransmitQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Transmitted QL value for the OCn/STM interface. If the OCn/STM interface TransmitQL Mode is disabled, then the received QL value is not applicable. This object is only applicable for Synchronous OCn/STM interface." ::= { ocnStmEntry 32 } ocnStmPortType OBJECT-TYPE SYNTAX OCNSTMPortType MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the OCN/STM Port Type. Determines whether the OCN/STM port operates in OC or STM mode." ::= { ocnStmEntry 33 } ocnStmFreqSourceType OBJECT-TYPE SYNTAX TDMFrequencySourceType MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the TDM Frequency source of OCN/STM port." ::= { ocnStmEntry 34 } ocnStmHighOrderPathType OBJECT-TYPE SYNTAX TDMPathType MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the High Order Path Type of the OCn/STM interface." ::= { ocnStmEntry 35 } ocnStmSfpName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the official name of the SFP." ::= { ocnStmEntry 36 } ocnStmSfpHardwareRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the hardware revision of the SFP." ::= { ocnStmEntry 37 } -- -- OCn Path Table -- stsVcPathTable OBJECT-TYPE SYNTAX SEQUENCE OF StsVcPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to OCn Path." ::= { cmFacilityObjects 48 } stsVcPathEntry OBJECT-TYPE SYNTAX StsVcPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the stsVcPathTable." INDEX { neIndex, shelfIndex, slotIndex, ocnStmIndex, stsVcPathParentIfIndex, stsVcPathIndex } ::= { stsVcPathTable 1 } StsVcPathEntry ::= SEQUENCE { stsVcPathParentIfIndex InterfaceIndex, stsVcPathIndex Unsigned32, stsVcPathIfIndex InterfaceIndex, stsVcPathAdminState AdminState, stsVcPathOperationalState OperationalState, stsVcPathSecondaryState SecondaryState, stsVcPathLoopbackConfig CmLoopbackType, stsVcPathLoopbackStatus CmLoopbackType, stsVcPathLoopbackTime Integer32, stsVcPathInsertingAIS TruthValue, stsVcPathBerExcThreshold BitErrRate, stsVcPathBerDegThreshold BitErrRate, stsVcPathTrailTraceFormat TrailTraceFormat, stsVcPathRxTrailTrace DisplayString, stsVcPathTxTrailTrace DisplayString, stsVcPathExpectedTrailTrace DisplayString, stsVcPathRxSignalLabel Unsigned32, stsVcPathTxSignalLabel Unsigned32, stsVcPathExpectedSignalLabel Unsigned32, stsVcPathRowStatus RowStatus, stsVcPathLowOrderPathType TDMPathType } stsVcPathParentIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is its parent's ifindex. Based on the Multiplexing hierarchy, this object points to the container's interface index." ::= { stsVcPathEntry 1 } stsVcPathIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is his index." ::= { stsVcPathEntry 2 } stsVcPathIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the same value as ifIndex for OCn Path. An integer index value used to uniquely identify this OCn Path interface." ::= { stsVcPathEntry 3 } stsVcPathAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the OCn Path." ::= { stsVcPathEntry 4 } stsVcPathOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the OCn Path." ::= { stsVcPathEntry 5 } stsVcPathSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the OCn Path." ::= { stsVcPathEntry 6 } stsVcPathLoopbackConfig OBJECT-TYPE SYNTAX CmLoopbackType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to initiate loopbacks on on the OCn Path." ::= { stsVcPathEntry 7 } stsVcPathLoopbackStatus OBJECT-TYPE SYNTAX CmLoopbackType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides status of the current loopback on the OCn Path." ::= { stsVcPathEntry 8 } stsVcPathLoopbackTime OBJECT-TYPE SYNTAX Integer32 (2..300) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify time for timed-loopbacks on on the OCn Path." ::= { stsVcPathEntry 9 } stsVcPathInsertingAIS OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to insert AIS-P out from OCn Path when it is in maintenance state." ::= { stsVcPathEntry 10 } stsVcPathBerExcThreshold OBJECT-TYPE SYNTAX BitErrRate MAX-ACCESS read-write STATUS current DESCRIPTION "This object provide the threshold of B3EXC." ::= { stsVcPathEntry 11 } stsVcPathBerDegThreshold OBJECT-TYPE SYNTAX BitErrRate MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the threshold of B3DEG." ::= { stsVcPathEntry 12 } stsVcPathTrailTraceFormat OBJECT-TYPE SYNTAX TrailTraceFormat MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the J1 length mode on the OCn Path." ::= { stsVcPathEntry 13 } stsVcPathRxTrailTrace OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the recevied J1 on the OCn Path." ::= { stsVcPathEntry 14 } stsVcPathTxTrailTrace OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the transmit J1 on the OCn Path." ::= { stsVcPathEntry 15 } stsVcPathExpectedTrailTrace OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the expected J1 on the OCn Path." ::= { stsVcPathEntry 16 } stsVcPathRxSignalLabel OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the recevied C2 on the OCn Path." ::= { stsVcPathEntry 17 } stsVcPathTxSignalLabel OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the transmit C2 on the OCn Path." ::= { stsVcPathEntry 18 } stsVcPathExpectedSignalLabel OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the expected C2 on the OCn Path." ::= { stsVcPathEntry 19 } stsVcPathRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of stsVcPathRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with stsVcPathRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The stsVcPathRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { stsVcPathEntry 20 } stsVcPathLowOrderPathType OBJECT-TYPE SYNTAX TDMPathType MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the low Order Path Type of the sts vc interface." ::= { stsVcPathEntry 21 } -- -- VT/VC Table -- vtVcPathTable OBJECT-TYPE SYNTAX SEQUENCE OF VtVcPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to VT1.5/VC12. These represent the lower order path (LOP) entities." ::= { cmFacilityObjects 49 } vtVcPathEntry OBJECT-TYPE SYNTAX VtVcPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the vtVcPathTable." INDEX { neIndex, shelfIndex, slotIndex, ocnStmIndex, vtVcPathParentIfIndex, vtVcPathIndex } ::= { vtVcPathTable 1 } VtVcPathEntry ::= SEQUENCE { vtVcPathParentIfIndex InterfaceIndex, vtVcPathIndex Unsigned32, vtVcPathIfIndex InterfaceIndex, vtVcPathAdminState AdminState, vtVcPathOperationalState OperationalState, vtVcPathSecondaryState SecondaryState, vtVcPathLoopbackConfig CmLoopbackType, vtVcPathLoopbackStatus CmLoopbackType, vtVcPathLoopbackTime Integer32, vtVcPathInsertingAIS TruthValue, vtVcPathBerExcThreshold BitErrRate, vtVcPathBerDegThreshold BitErrRate, vtVcPathTrailTraceFormat TrailTraceFormat, vtVcPathRxTrailTrace DisplayString, vtVcPathTxTrailTrace DisplayString, vtVcPathExpectedTrailTrace DisplayString, vtVcPathRxSignalLabel Unsigned32, vtVcPathTxSignalLabel Unsigned32, vtVcPathExpectedSignalLabel Unsigned32, vtVcPathRowStatus RowStatus } vtVcPathParentIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is its parent's ifindex." ::= { vtVcPathEntry 1 } vtVcPathIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the unique number of the Path within the parent container represented by vtvcPathParentIfIndex." ::= { vtVcPathEntry 2 } vtVcPathIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the same value as ifIndex for OCn VT1.5/VC12. An integer index value used to uniquely identify this OCn VT1.5/VC12 interface." ::= { vtVcPathEntry 3 } vtVcPathAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the OCn VT1.5/VC12." ::= { vtVcPathEntry 4 } vtVcPathOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the OCn VT1.5/VC12." ::= { vtVcPathEntry 5 } vtVcPathSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the OCn VT1.5/VC12." ::= { vtVcPathEntry 6 } vtVcPathLoopbackConfig OBJECT-TYPE SYNTAX CmLoopbackType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to initiate loopbacks on on the OCn VT1.5/VC12." ::= { vtVcPathEntry 7 } vtVcPathLoopbackStatus OBJECT-TYPE SYNTAX CmLoopbackType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides status of the current loopback on the OCn VT1.5/VC12." ::= { vtVcPathEntry 8 } vtVcPathLoopbackTime OBJECT-TYPE SYNTAX Integer32 (2..300) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify time for timed-loopbacks on on the OCn VT1.5/VC12." ::= { vtVcPathEntry 9 } vtVcPathInsertingAIS OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to insert AIS-P out from OCn VT1.5/VC12 when it is in maintenance state." ::= { vtVcPathEntry 10 } vtVcPathBerExcThreshold OBJECT-TYPE SYNTAX BitErrRate MAX-ACCESS read-write STATUS current DESCRIPTION "This object provide the threshold of BEREXC." ::= { vtVcPathEntry 11 } vtVcPathBerDegThreshold OBJECT-TYPE SYNTAX BitErrRate MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the threshold of BERDEG." ::= { vtVcPathEntry 12 } vtVcPathTrailTraceFormat OBJECT-TYPE SYNTAX TrailTraceFormat MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the J2 length mode on the OCn VT1.5/VC12." ::= { vtVcPathEntry 13 } vtVcPathRxTrailTrace OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the recevied J2 on the OCn VT1.5/VC12." ::= { vtVcPathEntry 14 } vtVcPathTxTrailTrace OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the transmit J2 on the OCn VT1.5/VC12." ::= { vtVcPathEntry 15 } vtVcPathExpectedTrailTrace OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the expected J2 on the OCn VT1.5/VC12." ::= { vtVcPathEntry 16 } vtVcPathRxSignalLabel OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the recevied V5 byte(b5-b7) on the OCn VT1.5/VC12." ::= { vtVcPathEntry 17 } vtVcPathTxSignalLabel OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the transmit V5 byte(b5-b7) on the OCn VT1.5/VC12." ::= { vtVcPathEntry 18 } vtVcPathExpectedSignalLabel OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the expected V5 byte(b5-b7) on the OCn VT1.5/VC12." ::= { vtVcPathEntry 19 } vtVcPathRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of vtVcPathRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with vtVcPathRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The vtVcPathRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { vtVcPathEntry 20 } -- -- OCn E1T1 Table -- e1t1Table OBJECT-TYPE SYNTAX SEQUENCE OF E1T1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to E1/T1." ::= { cmFacilityObjects 50 } e1t1Entry OBJECT-TYPE SYNTAX E1T1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the e1t1Table." INDEX { neIndex, shelfIndex, slotIndex, e1t1ParentIfIndex, e1t1Index } ::= { e1t1Table 1 } E1T1Entry ::= SEQUENCE { e1t1ParentIfIndex InterfaceIndex, e1t1Index Unsigned32, e1t1IfIndex InterfaceIndex, e1t1EntityIndex PhysicalIndex, e1t1AdminState AdminState, e1t1OperationalState OperationalState, e1t1SecondaryState SecondaryState, e1t1LoopbackConfig CmLoopbackType, e1t1LoopbackStatus CmLoopbackType, e1t1LoopbackTime Integer32, e1t1RemoteLoopbackRequest TruthValue, e1t1InsertingAIS TruthValue, e1t1RowStatus RowStatus, e1t1LineType E1T1LineType, e1t1LineCode E1T1LineCode, e1t1FrameFormat E1T1FrameFormat, e1t1LineBuildOut LineBuildOut, e1t1TimingDomain VariablePointer, e1t1RcvSensitivity E1T1RcvSensitivity, e1t1IdlePatternProfile VariablePointer, e1t1LoopbackProfile VariablePointer, e1t1RelatedContainerId VariablePointer, e1t1PatternLpbkControl TruthValue } e1t1ParentIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the parent (container) object's interface index. In the case when parent of E1T1Entry does not have a InterfaceIndex then the e1t1ParentIfIndex shall have the value of 2147483647, e.g. if parent of E1T1Entry is a card represented in pseudoWireE1T1CardTable." ::= { e1t1Entry 1 } e1t1Index OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index value used to uniquely identify this E1/T1 interface, within the parent container specified by e1t1ParentIfIndex." ::= { e1t1Entry 2 } e1t1IfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the same value as ifIndex for E1/T1. An integer index value used to uniquely identify this E1/T1 interface." ::= { e1t1Entry 3 } e1t1EntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Entity Index from ENTITY-MIB for this port." ::= { e1t1Entry 4 } e1t1AdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the E1/T1." ::= { e1t1Entry 5 } e1t1OperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the E1/T1." ::= { e1t1Entry 6 } e1t1SecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the E1/T1." ::= { e1t1Entry 7 } e1t1LoopbackConfig OBJECT-TYPE SYNTAX CmLoopbackType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to initiate loopbacks on on the E1/T1." ::= { e1t1Entry 8 } e1t1LoopbackStatus OBJECT-TYPE SYNTAX CmLoopbackType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides status of the current loopback on the E1/T1." ::= { e1t1Entry 9 } e1t1LoopbackTime OBJECT-TYPE SYNTAX Integer32 (2..300) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify time for timed-loopbacks on on the E1/T1." ::= { e1t1Entry 10 } e1t1RemoteLoopbackRequest OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify to repond the remote loopback request or not." ::= { e1t1Entry 11 } e1t1InsertingAIS OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to insert AIS out from E1/T1 when it is in maintenance state." ::= { e1t1Entry 12 } e1t1RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of e1t1RowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with e1t1RowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The e1t1RowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { e1t1Entry 13 } e1t1LineType OBJECT-TYPE SYNTAX E1T1LineType MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the E1/T1 Line Type. Determines whether the E1/T1 interface operates in T1 or E1 mode." ::= { e1t1Entry 14 } e1t1LineCode OBJECT-TYPE SYNTAX E1T1LineCode MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the E1/T1 Port Line Code. When the port is configured for a Line Type of T1, the valid values are t1-b8zs and t1-ami and the default value is t1-b8zs. When the port is configured for a Line Type of E1, the valid values are e1-hdb3 and e1-ami and the default value is e1-hdb3." ::= { e1t1Entry 15 } e1t1FrameFormat OBJECT-TYPE SYNTAX E1T1FrameFormat MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the E1/T1 Port Frame Format. When the port is configured for a Line Type of T1, the valid values are t1-sf, t1-esf and t1-unframed and the default value is t1-unframed. When the port is configured for a Line Type of E1, the valid values are e1-unframed, e1-crc4, and e1-dualFrame and the default value is e1-crc4. R5.4CC supports only t1-unframed for T1 Line type." ::= { e1t1Entry 16 } e1t1LineBuildOut OBJECT-TYPE SYNTAX LineBuildOut MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents Line Build Out on E1/T1 port." ::= { e1t1Entry 17 } e1t1TimingDomain OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents Timing Domain that the E1/T1 interface uses as timing source. The Timing Domain is a Synchronization Entity represented by an object in the f3SyncTable" ::= { e1t1Entry 18 } e1t1RcvSensitivity OBJECT-TYPE SYNTAX E1T1RcvSensitivity MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows configuring the reciever sensitivity based on expected signal strength" ::= { e1t1Entry 19 } e1t1IdlePatternProfile OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows selecting Idle Pattern Profile for the E1/T1 interface. Idle Patter Profile is represented by an object in the f3Pwe3IdlePatternProfileTable" ::= { e1t1Entry 20 } e1t1LoopbackProfile OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows selecting Loopback Profile for the E1/T1 interface. Loopback Profile is represented by an object in the f3Pwe3LoopbackProfileTable" ::= { e1t1Entry 21 } e1t1RelatedContainerId OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the related container VCG." ::= { e1t1Entry 22 } e1t1PatternLpbkControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to enable or disable Pattern Loopback on a E1 port." ::= { e1t1Entry 23 } -- -- OCn E3T3 Table -- E3T3Type ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the type of the E3/T3." SYNTAX INTEGER { none (0), e3 (1), t3 (2) } PortState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Port states for the eight 16xbits card ports." SYNTAX BITS { port1(0), port2(1), port3(2), port4(3), port5(4), port6(5), port7(6), port8(7) } e3t3Table OBJECT-TYPE SYNTAX SEQUENCE OF E3T3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to E3/T3." ::= { cmFacilityObjects 51 } e3t3Entry OBJECT-TYPE SYNTAX E3T3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the e3t3Table." INDEX { neIndex, shelfIndex, slotIndex, e3t3ParentIfIndex, e3t3Index } ::= { e3t3Table 1 } E3T3Entry ::= SEQUENCE { e3t3ParentIfIndex InterfaceIndex, e3t3Index Unsigned32, e3t3IfIndex InterfaceIndex, e3t3EntityIndex PhysicalIndex, e3t3AdminState AdminState, e3t3OperationalState OperationalState, e3t3SecondaryState SecondaryState, e3t3LoopbackConfig CmLoopbackType, e3t3LoopbackStatus CmLoopbackType, e3t3LoopbackTime Integer32, e3t3RemoteLoopbackRequest TruthValue, e3t3InsertingAIS TruthValue, e3t3CBitEnable TruthValue, e3t3T3Channelized TruthValue, e3t3RowStatus RowStatus, e3t3FrameFormat E3T3FrameFormat, e3t3RelatedContainerId VariablePointer } e3t3ParentIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is its parent's ifindex." ::= { e3t3Entry 1 } e3t3Index OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is his index." ::= { e3t3Entry 2 } e3t3IfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the same value as ifIndex for E3/T3. An integer index value used to uniquely identify this E3/T3 interface." ::= { e3t3Entry 3 } e3t3EntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Entity Index from ENTITY-MIB for this port." ::= { e3t3Entry 4 } e3t3AdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the E3/T3." ::= { e3t3Entry 5 } e3t3OperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the E3/T3." ::= { e3t3Entry 6 } e3t3SecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the E3/T3." ::= { e3t3Entry 7 } e3t3LoopbackConfig OBJECT-TYPE SYNTAX CmLoopbackType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to initiate loopbacks on on the E3/T3." ::= { e3t3Entry 8 } e3t3LoopbackStatus OBJECT-TYPE SYNTAX CmLoopbackType MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides status of the current loopback on the E3/T3." ::= { e3t3Entry 9 } e3t3LoopbackTime OBJECT-TYPE SYNTAX Integer32 (2..300) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify time for timed-loopbacks on on the E3/T3." ::= { e3t3Entry 10 } e3t3RemoteLoopbackRequest OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify to repond the remote loopback request or not." ::= { e3t3Entry 11 } e3t3InsertingAIS OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to insert AIS out from E3/T3 when it is in maintenance state." ::= { e3t3Entry 12 } e3t3CBitEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The object provides whether C-Bit Parity is enabled/disabled." ::= { e3t3Entry 13 } e3t3T3Channelized OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The object provides whether the T3 tunnel is channlized with T1." ::= { e3t3Entry 14 } e3t3RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of e3t3RowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with e3t3RowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The e3t3RowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { e3t3Entry 15 } e3t3FrameFormat OBJECT-TYPE SYNTAX E3T3FrameFormat MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Frame Format of the E3/T3." ::= { e3t3Entry 16 } e3t3RelatedContainerId OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "This object describe the related contained VCG." ::= { e3t3Entry 17 } -- -- traffic port extense Table -- cmEthernetTrafficPortExtTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetTrafficPortExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Facilities for configuration purposes." ::= { cmFacilityObjects 52 } cmEthernetTrafficPortExtEntry OBJECT-TYPE SYNTAX CmEthernetTrafficPortExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetTrafficPortExtTable." AUGMENTS { cmEthernetTrafficPortEntry } ::= { cmEthernetTrafficPortExtTable 1 } CmEthernetTrafficPortExtEntry ::= SEQUENCE { cmEthernetTrafficPortTDMEncapsulation GFPEncapsulationType, cmEthernetTrafficPortRelatedVCG VariablePointer, -- new 9.1.1 xgpro release columns cmEthernetTrafficPortMcastRateLimitEnabled TruthValue, cmEthernetTrafficPortMcastRateLimitSpeedLo Unsigned32, cmEthernetTrafficPortMcastRateLimitSpeedHi Unsigned32, cmEthernetTrafficPortBcastRateLimitEnabled TruthValue, cmEthernetTrafficPortBcastRateLimitSpeedLo Unsigned32, cmEthernetTrafficPortBcastRateLimitSpeedHi Unsigned32, cmEthernetTrafficPortCombinedRateLimitEnabled TruthValue, cmEthernetTrafficPortCombinedRateLimitSpeedLo Unsigned32, cmEthernetTrafficPortCombinedRateLimitSpeedHi Unsigned32, cmEthernetTrafficPortRefPrioMapProfile VariablePointer } cmEthernetTrafficPortTDMEncapsulation OBJECT-TYPE SYNTAX GFPEncapsulationType MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the GFP Encapsulation type of the traffic port." ::= { cmEthernetTrafficPortExtEntry 1 } cmEthernetTrafficPortRelatedVCG OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the related VCG of the traffic port." ::= { cmEthernetTrafficPortExtEntry 2 } cmEthernetTrafficPortMcastRateLimitEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether multicast packets need be limited on this port." ::= { cmEthernetTrafficPortExtEntry 3 } cmEthernetTrafficPortMcastRateLimitSpeedLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for multicast packets per port When cmEthernetTrafficPortMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits." ::= { cmEthernetTrafficPortExtEntry 4 } cmEthernetTrafficPortMcastRateLimitSpeedHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for multicast packets per port When cmEthernetTrafficPortMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits." ::= { cmEthernetTrafficPortExtEntry 5 } cmEthernetTrafficPortBcastRateLimitEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether broadcast packets need be limited per port." ::= { cmEthernetTrafficPortExtEntry 6 } cmEthernetTrafficPortBcastRateLimitSpeedLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for broadcast packets per port When cmEthernetTrafficPortBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits." ::= { cmEthernetTrafficPortExtEntry 7 } cmEthernetTrafficPortBcastRateLimitSpeedHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for broadcast packets per port When cmEthernetTrafficPortBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits." ::= { cmEthernetTrafficPortExtEntry 8 } cmEthernetTrafficPortCombinedRateLimitEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether multicast and broadcast packets need be limited per port." ::= { cmEthernetTrafficPortExtEntry 9 } cmEthernetTrafficPortCombinedRateLimitSpeedLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for multicast and broadcast packets per port. This objects only represents low 32 bits." ::= { cmEthernetTrafficPortExtEntry 10 } cmEthernetTrafficPortCombinedRateLimitSpeedHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for multicast and broadcast packets per port. This objects only represents high 32 bits." ::= { cmEthernetTrafficPortExtEntry 11 } cmEthernetTrafficPortRefPrioMapProfile OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set priority map profile." ::= { cmEthernetTrafficPortExtEntry 12 } -- -- Pulse Per Second Port -- f3PulsePerSecondPortTable OBJECT-TYPE SYNTAX SEQUENCE OF F3PulsePerSecondPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Pulse Per Second Port Facilities." ::= { cmFacilityObjects 53 } f3PulsePerSecondPortEntry OBJECT-TYPE SYNTAX F3PulsePerSecondPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3PulsePerSecondPortTable." INDEX { neIndex, shelfIndex, slotIndex, f3PulsePerSecondPortIndex } ::= { f3PulsePerSecondPortTable 1 } F3PulsePerSecondPortEntry ::= SEQUENCE { -- Port Indices f3PulsePerSecondPortIndex Integer32, f3PulsePerSecondPortIfIndex InterfaceIndex, f3PulsePerSecondPortEntityIndex PhysicalIndex, -- State Management params f3PulsePerSecondPortAdminState AdminState, f3PulsePerSecondPortOperationalState OperationalState, f3PulsePerSecondPortSecondaryState SecondaryState, -- port specific params f3PulsePerSecondPortSquelchControl SquelchControl, f3PulsePerSecondPortSquelchQL SSMQualityLevel, f3PulsePerSecondPortTODSource VariablePointer, f3PulsePerSecondPortDirection SignalDirectionType, f3PulsePerSecondPortInputRate PPSInputRate, f3PulsePerSecondPortDelayCompensation Integer32, f3PulsePerSecondPortClockClass Unsigned32, f3PulsePerSecondPortClockAccuracy Unsigned32, f3PulsePerSecondPortTimeSource TimeSource, f3PulsePerSecondPortPhyInterfaceType PPSPhyInterfaceType, f3PulsePerSecondPortOutputDelay Unsigned32, f3PulsePerSecondPortWidth Unsigned32, f3PulsePerSecondPortPolarity PpsPolarity, f3PulsePerSecondPortImpedance PpsPortImpedanceMode, f3PulsePerSecondPortAlias DisplayString, f3PulsePerSecondPortAssumedClockClass Unsigned32 } f3PulsePerSecondPortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify this Pulse Per Second Port within the card." ::= { f3PulsePerSecondPortEntry 1 } f3PulsePerSecondPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the same value as ifIndex for Pulse Per Second Port. An integer index value used to uniquely identify this Pulse Per Second Port." ::= { f3PulsePerSecondPortEntry 2 } f3PulsePerSecondPortEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Entity Index from ENTITY-MIB for this port." ::= { f3PulsePerSecondPortEntry 3 } -- State Management params f3PulsePerSecondPortAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the Pulse Per Second Port." ::= { f3PulsePerSecondPortEntry 4 } f3PulsePerSecondPortOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the Pulse Per Second Port." ::= { f3PulsePerSecondPortEntry 5 } f3PulsePerSecondPortSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Pulse Per Second Port." ::= { f3PulsePerSecondPortEntry 6 } f3PulsePerSecondPortSquelchControl OBJECT-TYPE SYNTAX SquelchControl MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set the Squelch Control for the Pulse Per Second port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port." ::= { f3PulsePerSecondPortEntry 7 } f3PulsePerSecondPortSquelchQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set the Squelch QL for the Pulse Per Second port. This value is used when f3PulsePerSecondPortSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched." ::= { f3PulsePerSecondPortEntry 8 } f3PulsePerSecondPortTODSource OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set the Pulse Per Second Source for the Port." ::= { f3PulsePerSecondPortEntry 9 } f3PulsePerSecondPortDirection OBJECT-TYPE SYNTAX SignalDirectionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the signal type (i.e. input or output)." ::= { f3PulsePerSecondPortEntry 10 } f3PulsePerSecondPortInputRate OBJECT-TYPE SYNTAX PPSInputRate MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the PPS Input Rate." ::= { f3PulsePerSecondPortEntry 11 } f3PulsePerSecondPortDelayCompensation OBJECT-TYPE SYNTAX Integer32 (-5000000..5000000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the PPS external Delay Compensation in nanoseconds in 8 nanoseconds steps. For input port, that is with input Signal Direction, the valid values are -5000000 to 5000000. Whereas for output port, the valid values are 0 to 90. Values which are not multiple of 8 will be automatically rounded up to the next multiple of 8." ::= { f3PulsePerSecondPortEntry 12 } f3PulsePerSecondPortClockClass OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specify PPS port clock class." ::= { f3PulsePerSecondPortEntry 13 } f3PulsePerSecondPortClockAccuracy OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specify PPS port clock accuracy." ::= { f3PulsePerSecondPortEntry 14 } f3PulsePerSecondPortTimeSource OBJECT-TYPE SYNTAX TimeSource MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specify PPS port time source." ::= { f3PulsePerSecondPortEntry 15 } f3PulsePerSecondPortPhyInterfaceType OBJECT-TYPE SYNTAX PPSPhyInterfaceType MAX-ACCESS read-write STATUS current DESCRIPTION "This object specify PPS physical interface type." ::= { f3PulsePerSecondPortEntry 16 } f3PulsePerSecondPortOutputDelay OBJECT-TYPE SYNTAX Unsigned32 (0..999999999) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the PPS Output Delay in nanoseconds. The valid values are 0 to 999999999 in 10 nanoseconds steps. Values which are not multiple of 10 will be automatically rounded up to the next multiple of 10." ::= { f3PulsePerSecondPortEntry 17 } f3PulsePerSecondPortWidth OBJECT-TYPE SYNTAX Unsigned32 (0..250000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Width of the PPS signal on the PPS Port. The valid values are 0 to 250000 in 1 microsecond unit." ::= { f3PulsePerSecondPortEntry 18 } f3PulsePerSecondPortPolarity OBJECT-TYPE SYNTAX PpsPolarity MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Polarity of the PPS signal on the PPS Port." ::= { f3PulsePerSecondPortEntry 19 } f3PulsePerSecondPortImpedance OBJECT-TYPE SYNTAX PpsPortImpedanceMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the impedance mode for an input PPS port. It is only an indication and cannot be set for an output PPS Port." ::= { f3PulsePerSecondPortEntry 20 } f3PulsePerSecondPortAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows SNMP management entities to provide an alias to the PPS port." ::= { f3PulsePerSecondPortEntry 21 } f3PulsePerSecondPortAssumedClockClass OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Assumed Clock Class for an input PPS port. It is only an indication and cannot be set for an output PPS Port." ::= { f3PulsePerSecondPortEntry 22 } -- -- Time Of Day Port -- f3TimeOfDayPortTable OBJECT-TYPE SYNTAX SEQUENCE OF F3TimeOfDayPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Time Of Day Port Facilities." ::= { cmFacilityObjects 55 } f3TimeOfDayPortEntry OBJECT-TYPE SYNTAX F3TimeOfDayPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3TimeOfDayPortTable." INDEX { neIndex, shelfIndex, slotIndex, f3TimeOfDayPortIndex } ::= { f3TimeOfDayPortTable 1 } F3TimeOfDayPortEntry ::= SEQUENCE { -- Port Indices f3TimeOfDayPortIndex Integer32, f3TimeOfDayPortIfIndex InterfaceIndex, f3TimeOfDayPortEntityIndex PhysicalIndex, -- State Management params f3TimeOfDayPortAdminState AdminState, f3TimeOfDayPortOperationalState OperationalState, f3TimeOfDayPortSecondaryState SecondaryState, -- port specific params f3TimeOfDayPortSquelchControl SquelchControl, f3TimeOfDayPortSquelchQL SSMQualityLevel, f3TimeOfDayPortTODSource VariablePointer, f3TimeOfDayPortOutputFormat TODOutputFormat, f3TimeOfDayPortSignalDirection SignalDirectionType, f3TimeOfDayPortInputRate PPSInputRate, f3TimeOfDayPortDelayCompensation Integer32, f3TimeOfDayPortAlias DisplayString, f3TimeOfDayPortAssumedClockClass Unsigned32 } f3TimeOfDayPortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify this Time Of Day Port within the card." ::= { f3TimeOfDayPortEntry 1 } f3TimeOfDayPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the same value as ifIndex for Time Of Day Port. An integer index value used to uniquely identify this Time Of Day Port." ::= { f3TimeOfDayPortEntry 2 } f3TimeOfDayPortEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Entity Index from ENTITY-MIB for this port." ::= { f3TimeOfDayPortEntry 3 } -- State Management params f3TimeOfDayPortAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the Time Of Day Port." ::= { f3TimeOfDayPortEntry 4 } f3TimeOfDayPortOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the Time Of Day Port." ::= { f3TimeOfDayPortEntry 5 } f3TimeOfDayPortSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Time Of Day Port." ::= { f3TimeOfDayPortEntry 6 } f3TimeOfDayPortSquelchControl OBJECT-TYPE SYNTAX SquelchControl MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set the Squelch Control for the Time Of Day port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port." ::= { f3TimeOfDayPortEntry 7 } f3TimeOfDayPortSquelchQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set the Squelch QL for the Time Of Day port. This value is used when f3TimeOfDayPortSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched." ::= { f3TimeOfDayPortEntry 8 } f3TimeOfDayPortTODSource OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set the Time Of Day Source for the Port." ::= { f3TimeOfDayPortEntry 9 } f3TimeOfDayPortOutputFormat OBJECT-TYPE SYNTAX TODOutputFormat MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set the Output Format for the Time Of Day port. The Output Format is used to determine the type of output format of the TOD port." ::= { f3TimeOfDayPortEntry 10 } f3TimeOfDayPortSignalDirection OBJECT-TYPE SYNTAX SignalDirectionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the signal direction type (i.e. input or output)." ::= { f3TimeOfDayPortEntry 11 } f3TimeOfDayPortInputRate OBJECT-TYPE SYNTAX PPSInputRate MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Time Of Day Input Rate." ::= { f3TimeOfDayPortEntry 12 } f3TimeOfDayPortDelayCompensation OBJECT-TYPE SYNTAX Integer32 (-5000000..5000000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the TOD external Delay Compensation in nanoseconds. For input port, that is with input Signal Direction, the valid values are -5000000 to 5000000 in 8 nanoseconds steps. Values which are not multiple of 8 will be automatically rounded up to the next multiple of 8." ::= { f3TimeOfDayPortEntry 13 } f3TimeOfDayPortAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows SNMP management entities to provide an alias to the Time Of Day port." ::= { f3TimeOfDayPortEntry 14 } f3TimeOfDayPortAssumedClockClass OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Assumed Clock Class for an input TOD port. It is only an indication and cannot be set for an output TOD Port." ::= { f3TimeOfDayPortEntry 15 } -- -- network port extense Table -- cmEthernetNetPortExtTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetNetPortExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Network Port Facilities for configuration purposes." ::= { cmFacilityObjects 56 } cmEthernetNetPortExtEntry OBJECT-TYPE SYNTAX CmEthernetNetPortExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetNetPortExtTable." AUGMENTS { cmEthernetNetPortEntry } ::= { cmEthernetNetPortExtTable 1 } CmEthernetNetPortExtEntry ::= SEQUENCE { cmEthernetNetPortTDMEncapsulation GFPEncapsulationType, cmEthernetNetPortAssociatedTdmEntity VariablePointer, cmEthernetNetPortInsertingAIS TruthValue } cmEthernetNetPortTDMEncapsulation OBJECT-TYPE SYNTAX GFPEncapsulationType MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the GFP Encapsulation type of the TDM network port." ::= { cmEthernetNetPortExtEntry 1 } cmEthernetNetPortAssociatedTdmEntity OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the associated working path of TDM network port." ::= { cmEthernetNetPortExtEntry 2 } cmEthernetNetPortInsertingAIS OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to insert AIS out from TDM network port when it is in maintenance state." ::= { cmEthernetNetPortExtEntry 3 } -- -- GPS Receiver Port -- f3GPSReceiverPortTable OBJECT-TYPE SYNTAX SEQUENCE OF F3GPSReceiverPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to the GPS Receiver Port Facilities." ::= { cmFacilityObjects 57 } f3GPSReceiverPortEntry OBJECT-TYPE SYNTAX F3GPSReceiverPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3GPSReceiverPortTable." INDEX { neIndex, shelfIndex, slotIndex, f3GPSReceiverPortIndex } ::= { f3GPSReceiverPortTable 1 } F3GPSReceiverPortEntry ::= SEQUENCE { -- Port Indices f3GPSReceiverPortIndex Integer32, f3GPSReceiverPortIfIndex InterfaceIndex, f3GPSReceiverPortEntityIndex PhysicalIndex, -- State Management params f3GPSReceiverPortAdminState AdminState, f3GPSReceiverPortOperationalState OperationalState, f3GPSReceiverPortSecondaryState SecondaryState, -- port specific params f3GPSReceiverPortPPSGenCondition PPSGenCondition, f3GPSReceiverPortAntennaCableLength Unsigned32, f3GPSReceiverPortAntennaStatus GPSAntennaStatus, f3GPSReceiverPortSatellitesUsableFlag TruthValue, f3GPSReceiverPortNumTrackingSatellites Unsigned32, f3GPSReceiverPortSelfSurveyProgress Unsigned32, f3GPSReceiverPortPPSGeneratedFlag TruthValue, f3GPSReceiverPortGnssSystem ConstellationType, f3GPSReceiverPortInstallationType InstallationType, f3GPSReceiverPortGnssTOD DateAndTime, f3GPSReceiverPortGnssSystemsBitMap ConstellationTypesBitMap, f3GPSReceiverPortAlias DisplayString, f3GPSReceiverPortAntennaDelayValue Integer32, f3GPSReceiverPortAntennaDelayType DelayOption, f3GPSReceiverPortCNOMask Unsigned32, f3GPSReceiverPortElevationMask Unsigned32, f3GPSReceiverPortCoordinateLatitude DisplayString, f3GPSReceiverPortCoordinateLongitude DisplayString, f3GPSReceiverPortCoordinateAltitude Unsigned32, f3GPSReceiverPortFirmwareUpgradePercent Integer32, f3GPSReceiverPortPDOPMask Unsigned32, f3GPSReceiverPortSelfSurveyPeriod Unsigned32, f3GPSReceiverPortSatMin1Threshold Unsigned32, f3GPSReceiverPortSatMin2Threshold Unsigned32, f3GPSReceiverPortPDOP Unsigned32, f3GPSReceiverPortSelfSurveyControl ToggleValue, f3GPSReceiverPortCoordinateStringAltitude DisplayString, f3GPSReceiverPortLocationMode LocationMode, f3GPSReceiverPortTimeAdvanceMode TimeAdvanceMode, f3GPSReceiverPortTimeAdvanceValue Integer32, f3GPSReceiverPortForcedAntennaConnected ToggleValue, f3GPSReceiverPortServiceAvailableTime Unsigned32, f3GPSReceiverPortServiceUnavailableTime Unsigned32, f3GPSReceiverPortServiceAvailablePercentage DisplayString, f3GPSReceiverPortAGC Integer32, f3GPSReceiverPortSelfSurveyPositionAccuracy Unsigned32, f3GPSReceiverPortHorizontalAccuracy Unsigned32, f3GPSReceiverPortVerticalAccuracy Unsigned32, f3GPSReceiverPortTDOP Unsigned32, f3GPSReceiverPortHDOP Unsigned32, f3GPSReceiverPortVDOP Unsigned32, f3GPSReceiverPortFailureSuspendTime Unsigned32, f3GPSReceiverPortSpoofingPpsThreshold Unsigned32, f3GPSReceiverPortSpoofingPpsDifference Unsigned32, f3GPSReceiverPortSpoofingLocationThreshold Unsigned32, f3GPSReceiverPortSpoofingLocationDifference Unsigned32, f3GPSReceiverPortGnssDynamicModel DynamicModelType } f3GPSReceiverPortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify this GPS Receiver Port within the card." ::= { f3GPSReceiverPortEntry 1 } f3GPSReceiverPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the same value as ifIndex for Time Of Day Port. An integer index value used to uniquely identify this GPS Receiver Port." ::= { f3GPSReceiverPortEntry 2 } f3GPSReceiverPortEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Entity Index from ENTITY-MIB for this port." ::= { f3GPSReceiverPortEntry 3 } -- State Management params f3GPSReceiverPortAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the GPS Receiver Port." ::= { f3GPSReceiverPortEntry 4 } f3GPSReceiverPortOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the GPS Receiver Port." ::= { f3GPSReceiverPortEntry 5 } f3GPSReceiverPortSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the GPS Receiver Port." ::= { f3GPSReceiverPortEntry 6 } f3GPSReceiverPortPPSGenCondition OBJECT-TYPE SYNTAX PPSGenCondition MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows for configuration of the PPS generation condition. PPS is generated when at least one satellite is tracked or when at least three satellites are tracked." ::= { f3GPSReceiverPortEntry 7 } f3GPSReceiverPortAntennaCableLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object allows for configuration of the GPS Antenna cable length in meters. This object is deprecated and replaced by f3GPSReceiverPortAntennaDelayValue." ::= { f3GPSReceiverPortEntry 8 } f3GPSReceiverPortAntennaStatus OBJECT-TYPE SYNTAX GPSAntennaStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the GPS Receiver Port Antenna status." ::= { f3GPSReceiverPortEntry 9 } f3GPSReceiverPortSatellitesUsableFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides information on whether the satellites are usable. It is set to TRUE, when ephemeris and health data for at least one satellite is available." ::= { f3GPSReceiverPortEntry 10 } f3GPSReceiverPortNumTrackingSatellites OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides information on the number of tracking satellites." ::= { f3GPSReceiverPortEntry 11 } f3GPSReceiverPortSelfSurveyProgress OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides information on the percentage of fixes collected so far." ::= { f3GPSReceiverPortEntry 12 } f3GPSReceiverPortPPSGeneratedFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether there are enough usable satellites to provide accurate PPS output." ::= { f3GPSReceiverPortEntry 13 } f3GPSReceiverPortGnssSystem OBJECT-TYPE SYNTAX ConstellationType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object configure Constellation Type of the GPS Antenna." ::= { f3GPSReceiverPortEntry 14 } f3GPSReceiverPortInstallationType OBJECT-TYPE SYNTAX InstallationType MAX-ACCESS read-write STATUS current DESCRIPTION "This object configure Installation Type of the GPS Antenna." ::= { f3GPSReceiverPortEntry 15 } f3GPSReceiverPortGnssTOD OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the last time was executed." ::= { f3GPSReceiverPortEntry 16 } f3GPSReceiverPortGnssSystemsBitMap OBJECT-TYPE SYNTAX ConstellationTypesBitMap MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures GNSS constellation types supported by a GNSS Receiver Port" ::= { f3GPSReceiverPortEntry 17 } f3GPSReceiverPortAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object provides an alias to the GPS port" ::= { f3GPSReceiverPortEntry 18 } f3GPSReceiverPortAntennaDelayValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures GNSS antenna cable delay used by the GNSS Receiver Port, in units determined by f3GPSReceiverPortAntennaDelayType object." ::= { f3GPSReceiverPortEntry 19 } f3GPSReceiverPortAntennaDelayType OBJECT-TYPE SYNTAX DelayOption MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures GNSS antenna cable delay type (units)" ::= { f3GPSReceiverPortEntry 20 } f3GPSReceiverPortCNOMask OBJECT-TYPE SYNTAX Unsigned32 (0..55) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the C/No mask in dB-Hz units, used by the GNSS Receiver Port." ::= { f3GPSReceiverPortEntry 21 } f3GPSReceiverPortElevationMask OBJECT-TYPE SYNTAX Unsigned32 (0..90) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the elevation mask in degrees, used by the GNSS Receiver Port." ::= { f3GPSReceiverPortEntry 22 } f3GPSReceiverPortCoordinateLatitude OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the GNSS Receiver Port coordinate latitude in the following format: N|Sddd:mm:ss.sss (d=degrees, m=minutes, s=seconds) e.g. N37:22:44.123." ::= { f3GPSReceiverPortEntry 23 } f3GPSReceiverPortCoordinateLongitude OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the GNSS Receiver Port coordinate longitude in the following format: E|Wddd:mm:ss.sss (d=degrees, m=minutes, s=seconds) e.g. E157:53:33.456." ::= { f3GPSReceiverPortEntry 24 } f3GPSReceiverPortCoordinateAltitude OBJECT-TYPE SYNTAX Unsigned32 (0..99999) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the GNSS Receiver Port coordinate altitude in meters." ::= { f3GPSReceiverPortEntry 25 } f3GPSReceiverPortFirmwareUpgradePercent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the firmware upgrade percent value. Note: value 255 means NA." ::= { f3GPSReceiverPortEntry 26 } f3GPSReceiverPortPDOPMask OBJECT-TYPE SYNTAX Unsigned32 (200..1200) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures PDOP Mask used by the GNSS Receiver. The mask value is expressed in hundredth of the PDOP definition value and it is rounded to the nearest multiple of hundreds. For instance, a value of 200 means that GNSS Receiver stops collecting data when f3GPSReceiverPortPDOP value exceeds 200." ::= { f3GPSReceiverPortEntry 27 } f3GPSReceiverPortSelfSurveyPeriod OBJECT-TYPE SYNTAX Unsigned32 (1..500000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the Self Survey Period used by the GNSS Receiver." ::= { f3GPSReceiverPortEntry 28 } f3GPSReceiverPortSatMin1Threshold OBJECT-TYPE SYNTAX Unsigned32 (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the first threshold for the minimum of satellites used by the GNSS Receiver. SatMin1 must be stricly greater than SatMin2." ::= { f3GPSReceiverPortEntry 29 } f3GPSReceiverPortSatMin2Threshold OBJECT-TYPE SYNTAX Unsigned32 (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the second threshold for the minimum of satellites used by the GNSS Receiver. SatMin1 must be stricly greater than SatMin2." ::= { f3GPSReceiverPortEntry 30 } f3GPSReceiverPortPDOP OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the dimensionless PDOP value calculated by the GNSS Receiver while GNSS Receiver Survey Pogress is not complete yet. The value is expressed in hundredth of the PDOP definition. For instance, a value of 153 means that PDOP calculated by GNSS Receiver is 1.53. When the value cannot be evaluated by the GNSS Receiver or when Survey Progress is complete, the value is shown with the maximum range value 4095." ::= { f3GPSReceiverPortEntry 31 } f3GPSReceiverPortSelfSurveyControl OBJECT-TYPE SYNTAX ToggleValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to enable or disable the automatic location control. When it is enabled, the location of the equipment is evaluated by GNSS Receiver. When it is disabled the position is given by Coordinate Lattitude, Coordinate Longitude, and Altitude." ::= { f3GPSReceiverPortEntry 32 } f3GPSReceiverPortCoordinateStringAltitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "When Self Survey Control is disabled, this object configures the GNSS Receiver Port altitude in meters. The altitude is of the form [+/-]XXXXX[.Y] where XXXXX can be any between -400 and 10000 value and Y allows precision of 1 decimal after the floating point. Note that the sign and .Y are optional. When Self Survey Control is enabled, this object is not configurable and displays the GNSS Receiver Port altitude in meters." ::= { f3GPSReceiverPortEntry 33 } f3GPSReceiverPortLocationMode OBJECT-TYPE SYNTAX LocationMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage location mode for the GNSS receiver on OSA540X." ::= { f3GPSReceiverPortEntry 34 } f3GPSReceiverPortTimeAdvanceMode OBJECT-TYPE SYNTAX TimeAdvanceMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage time advance mode for the GNSS on OSA540X." ::= { f3GPSReceiverPortEntry 35 } f3GPSReceiverPortTimeAdvanceValue OBJECT-TYPE SYNTAX Integer32 (1..200) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to configure time advance value (ns) for the GNSS on OSA540X." ::= { f3GPSReceiverPortEntry 36 } f3GPSReceiverPortForcedAntennaConnected OBJECT-TYPE SYNTAX ToggleValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the antenna connected mode on OSA540X." ::= { f3GPSReceiverPortEntry 37 } f3GPSReceiverPortServiceAvailableTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows to manage service available time (seconds) for GNSS." ::= { f3GPSReceiverPortEntry 38 } f3GPSReceiverPortServiceUnavailableTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows to manage service unavailable time (seconds) for GNSS." ::= { f3GPSReceiverPortEntry 39 } f3GPSReceiverPortServiceAvailablePercentage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows to manage service available in percentage [XXX.YY%] for GNSS." ::= { f3GPSReceiverPortEntry 40 } f3GPSReceiverPortAGC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Automatic Gain Control (AGC) level for the GNSS receiver." ::= { f3GPSReceiverPortEntry 41 } f3GPSReceiverPortSelfSurveyPositionAccuracy OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the Self Survey Position accuracy threshold (in millimeters) used by the GNSS Receiver." ::= { f3GPSReceiverPortEntry 42 } f3GPSReceiverPortHorizontalAccuracy OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the horizontal accuracy (in millimeters) of the position fix determined by the GNSS receiver." ::= { f3GPSReceiverPortEntry 43 } f3GPSReceiverPortVerticalAccuracy OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the vertical accuracy (in millimeters) of the position fix determined by the GNSS receiver." ::= { f3GPSReceiverPortEntry 44 } f3GPSReceiverPortTDOP OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the dimensionless TDOP value calculated by the GNSS Receiver. The value is expressed in hundredth of the TDOP definition. For instance, a value of 153 means that TDOP calculated by GNSS Receiver is 1.53. When the value cannot be evaluated by the GNSS Receiver, the value is shown with the minimum range value 0." ::= { f3GPSReceiverPortEntry 45 } f3GPSReceiverPortHDOP OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the dimensionless HDOP value calculated by the GNSS Receiver while GNSS Receiver Survey Pogress is not complete yet or the receiver is in navigation mode. The value is expressed in hundredth of the HDOP definition. For instance, a value of 153 means that HDOP calculated by GNSS Receiver is 1.53. When the value cannot be evaluated by the GNSS Receiver or when Survey Progress is complete, the value is shown with the minimum range value 0." ::= { f3GPSReceiverPortEntry 46 } f3GPSReceiverPortVDOP OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the dimensionless VDOP value calculated by the GNSS Receiver while GNSS Receiver Survey Pogress is not complete yet or the receiver is in navigation mode. The value is expressed in hundredth of the VDOP definition. For instance, a value of 153 means that VDOP calculated by GNSS Receiver is 1.53. When the value cannot be evaluated by the GNSS Receiver or when Survey Progress is complete, the value is shown with the minimum range value 0." ::= { f3GPSReceiverPortEntry 47 } f3GPSReceiverPortFailureSuspendTime OBJECT-TYPE SYNTAX Unsigned32 (3..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Failure Suspend Time for the GNSS receiver." ::= { f3GPSReceiverPortEntry 48 } f3GPSReceiverPortSpoofingPpsThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the threshold (in nanoseconds ) for generating PPS spoofing alarm in 5405." ::= { f3GPSReceiverPortEntry 49 } f3GPSReceiverPortSpoofingPpsDifference OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the calculated PPS difference (in nanoseconds ) provided by default and secondary GNSS receivers in 5405." ::= { f3GPSReceiverPortEntry 50 } f3GPSReceiverPortSpoofingLocationThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..500) MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the threshold (in meters) for generating Location spoofing alarm in 5405." ::= { f3GPSReceiverPortEntry 51 } f3GPSReceiverPortSpoofingLocationDifference OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the calculated Location difference (in meters) based on position information provided by default and secondary GNSS receivers in 5405." ::= { f3GPSReceiverPortEntry 52 } f3GPSReceiverPortGnssDynamicModel OBJECT-TYPE SYNTAX DynamicModelType MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the dynamic model of GNSS. For example, whether the GNSS receiver is stationary, automotive etc. " ::= { f3GPSReceiverPortEntry 53 } cmPethPsePortExtTable OBJECT-TYPE SYNTAX SEQUENCE OF CmPethPsePortExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to PsePortExtEntry." ::= { cmFacilityObjects 58 } cmPethPsePortExtEntry OBJECT-TYPE SYNTAX CmPethPsePortExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmPethPsePortExtEntry." INDEX { cmPethPsePortExtGroupIndex, cmPethPsePortExtIndex } ::= { cmPethPsePortExtTable 1 } CmPethPsePortExtEntry ::= SEQUENCE { cmPethPsePortExtGroupIndex Integer32, cmPethPsePortExtIndex Integer32, cmPethPsePortExtAssociatedPort VariablePointer, pethPsePortExtPowerConsumption Unsigned32, pethPsePortExtAvailablePowerLevel PsePowerLevel } cmPethPsePortExtGroupIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object has the same value with the group index in pethPsePortTalbe." ::= { cmPethPsePortExtEntry 1 } cmPethPsePortExtIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object has the same value with the port index in pethPsePortTalbe." ::= { cmPethPsePortExtEntry 2 } cmPethPsePortExtAssociatedPort OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the oid of associated physical port." ::= { cmPethPsePortExtEntry 3 } pethPsePortExtPowerConsumption OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object means the power consumption of each port in mWatts." ::= { cmPethPsePortExtEntry 4 } pethPsePortExtAvailablePowerLevel OBJECT-TYPE SYNTAX PsePowerLevel MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the pse port available power level." ::= { cmPethPsePortExtEntry 5 } pethMainPseEXTTable OBJECT-TYPE SYNTAX SEQUENCE OF PethMainPseEXTEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to PethMainPseEXTEntry." ::= { cmFacilityObjects 59 } pethMainPseEXTEntry OBJECT-TYPE SYNTAX PethMainPseEXTEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the pethMainPseEXTEntry." INDEX { pethMainPseExtGroupIndex } ::= { pethMainPseEXTTable 1 } PethMainPseEXTEntry ::= SEQUENCE { pethMainPseExtGroupIndex Integer32, pethMainPseExtNonStandardPD PSENonStandardPD } pethMainPseExtGroupIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object has the same value with the group index in pethMainPseEXTTable." ::= { pethMainPseEXTEntry 1 } pethMainPseExtNonStandardPD OBJECT-TYPE SYNTAX PSENonStandardPD MAX-ACCESS read-write STATUS current DESCRIPTION "disabled: don't support non-standard PD, enabled: support non-standard PD" ::= { pethMainPseEXTEntry 2 } -- -- MPFlow Table -- cmMPFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF CmMPFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to MPFlow." ::= { cmFacilityObjects 60 } cmMPFlowEntry OBJECT-TYPE SYNTAX CmMPFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmMPFlowTable." INDEX { neIndex, cmMPFlowIndex } ::= { cmMPFlowTable 1 } CmMPFlowEntry ::= SEQUENCE { cmMPFlowIndex Integer32, cmMPFlowCircuitName F3DisplayString, cmMPFlowAdminState AdminState, cmMPFlowOperationalState OperationalState, cmMPFlowSecondaryState SecondaryState, cmMPFlowLearningEnabled TruthValue, cmMPFlowAgingTimer Integer32, cmMPFlowFwdTableSizeProfileID VariablePointer, cmMPFlowtableFullAction LearningAction, cmMPFlowStorageType StorageType, cmMPFlowRowStatus RowStatus, cmMPFlowLearningConfigAction LearningConfigAction, cmMPFlowFPList F3DisplayString } cmMPFlowIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify this MultiPointFlow." ::= { cmMPFlowEntry 1 } cmMPFlowCircuitName OBJECT-TYPE SYNTAX F3DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows SNMP management entities to provide a circuit identifier with the MPFlow." ::= { cmMPFlowEntry 2 } cmMPFlowAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the Flow." ::= { cmMPFlowEntry 3 } cmMPFlowOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the Flow." ::= { cmMPFlowEntry 4 } cmMPFlowSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Flow." ::= { cmMPFlowEntry 5 } cmMPFlowLearningEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "DISABLED: The forwarding function of the Flow does not dynamically learn MAC address to flowpoint mapping. ENABLED: The forwarding function of the Flow dynamically learns MAC address to flowpoint mapping based on ingress flowpoing and source MAC address." ::= { cmMPFlowEntry 6 } cmMPFlowAgingTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Table Entry will be removed from the forwarding table after an inactivity time represented by this entry. Not used in EG-X." ::= { cmMPFlowEntry 7 } cmMPFlowFwdTableSizeProfileID OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "Profile ID for Maximum number of MAC Table Entries for the flow" ::= { cmMPFlowEntry 8 } cmMPFlowtableFullAction OBJECT-TYPE SYNTAX LearningAction MAX-ACCESS read-write STATUS current DESCRIPTION "Action on ingress frames when the number of MAC Table entires has reached the maximum defined by tableSize. BLOCK: A frame with a Source MAC address not in the MAC Table will be discarded. FORWARD: A frame with a Source MAC address not in the MAC table will not be learned and will be flooded to other flowpoints." ::= { cmMPFlowEntry 9 } cmMPFlowStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmMPFlowEntry 10 } cmMPFlowRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmMPFlowRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmFlowRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmMPFlowRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode." ::= { cmMPFlowEntry 11 } cmMPFlowLearningConfigAction OBJECT-TYPE SYNTAX LearningConfigAction MAX-ACCESS read-write STATUS current DESCRIPTION "This objects allows performing user action on Learning Table." ::= { cmMPFlowEntry 12 } cmMPFlowFPList OBJECT-TYPE SYNTAX F3DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object only used to display trap and Flow point list. Fp will be add in the cmMPFlowMemberTable." ::= { cmMPFlowEntry 13 } -- -- MP Flow Member Table -- cmMPFlowMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF CmMPFlowMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to MPFlowMember." ::= { cmFacilityObjects 61 } cmMPFlowMemberEntry OBJECT-TYPE SYNTAX CmMPFlowMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmMPFlowMemberTable." INDEX { neIndex, cmMPFlowIndex, cmMPFlowMemberFPIndex } ::= { cmMPFlowMemberTable 1 } CmMPFlowMemberEntry ::= SEQUENCE { cmMPFlowMemberFPIndex VariablePointer, cmMPFlowPointRowStatus RowStatus } cmMPFlowMemberFPIndex OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object describes the relate Flow point." ::= { cmMPFlowMemberEntry 1 } cmMPFlowPointRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmMPFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmFlowRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmMPFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode." ::= { cmMPFlowMemberEntry 2 } -- -- EthernetTraffic Port PCP encoding table -- cmEthernetTrafficPortPcpDEEncTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetTrafficPortPcpDEEncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "EthernetTraffic Port PCP drop eligibility encoding table. This is applied to a frame that is egressing at the EthernetTraffic port." ::= { cmFacilityObjects 62 } cmEthernetTrafficPortPcpDEEncEntry OBJECT-TYPE SYNTAX CmEthernetTrafficPortPcpDEEncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the ethernetPBPcpDEEncPortTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, cmEthernetTrafficPortPcpDEEncIndex } ::= { cmEthernetTrafficPortPcpDEEncTable 1 } CmEthernetTrafficPortPcpDEEncEntry ::= SEQUENCE { cmEthernetTrafficPortPcpDEEncIndex Integer32, cmEthernetTrafficPortPcpDEEncInPriority VlanPriority, cmEthernetTrafficPortPcpDEEncDropIneligiblePrio VlanPriority, cmEthernetTrafficPortPcpDEEncDropEligiblePrio VlanPriority } cmEthernetTrafficPortPcpDEEncIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the PCP drop eligible encoding table." ::= { cmEthernetTrafficPortPcpDEEncEntry 1 } cmEthernetTrafficPortPcpDEEncInPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority." ::= { cmEthernetTrafficPortPcpDEEncEntry 2 } cmEthernetTrafficPortPcpDEEncDropIneligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the PCP value that has a priority value with implicit drop ineligibility encoded into it." ::= { cmEthernetTrafficPortPcpDEEncEntry 3 } cmEthernetTrafficPortPcpDEEncDropEligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the PCP value that has a priority value with implicit drop eligibility encoded into it." ::= { cmEthernetTrafficPortPcpDEEncEntry 4 } -- -- EthernetTraffic Port PCP decoding table -- cmEthernetTrafficPortPcpDEDecTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetTrafficPortPcpDEDecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "EthernetTraffic Port PCP drop eligibility decoding table. This is applied to a frame that is ingressing at a port." ::= { cmFacilityObjects 63 } cmEthernetTrafficPortPcpDEDecEntry OBJECT-TYPE SYNTAX CmEthernetTrafficPortPcpDEDecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the ethernetPBPcpDEDecPortTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, cmEthernetTrafficPortPcpDEDecIndex } ::= { cmEthernetTrafficPortPcpDEDecTable 1 } CmEthernetTrafficPortPcpDEDecEntry ::= SEQUENCE { cmEthernetTrafficPortPcpDEDecIndex Integer32, cmEthernetTrafficPortPcpDEDecInPriority VlanPriority, cmEthernetTrafficPortPcpDEDecOutPriority VlanPriority, cmEthernetTrafficPortPcpDEDecDropEligible TruthValue } cmEthernetTrafficPortPcpDEDecIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the PCP drop eligible decoding table." ::= { cmEthernetTrafficPortPcpDEDecEntry 1 } cmEthernetTrafficPortPcpDEDecInPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the input priority that is decoded to get priority and the drop eligibility of a frame." ::= { cmEthernetTrafficPortPcpDEDecEntry 2 } cmEthernetTrafficPortPcpDEDecOutPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the priority value decoded from a incoming PCP value." ::= { cmEthernetTrafficPortPcpDEDecEntry 3 } cmEthernetTrafficPortPcpDEDecDropEligible OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop eligibility decoded from a incoming PCP value." ::= { cmEthernetTrafficPortPcpDEDecEntry 4 } -- -- EthernetTraffic Port PCP pair table -- cmEthernetTrafficPortPcpDEPairTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetTrafficPortPcpDEPairEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "EthernetTraffic Port PCP drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the PCP DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D." ::= { cmFacilityObjects 64 } cmEthernetTrafficPortPcpDEPairEntry OBJECT-TYPE SYNTAX CmEthernetTrafficPortPcpDEPairEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmAccPortPcpDEPairEntry." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, cmEthernetTrafficPortPcpDEPairIndex } ::= { cmEthernetTrafficPortPcpDEPairTable 1 } CmEthernetTrafficPortPcpDEPairEntry ::= SEQUENCE { cmEthernetTrafficPortPcpDEPairIndex Integer32, cmEthernetTrafficPortPcpDEDropIneligiblePrio VlanPriority, cmEthernetTrafficPortPcpDEDropEligiblePrio VlanPriority } cmEthernetTrafficPortPcpDEPairIndex OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the PCP drop eligible priority pair table." ::= { cmEthernetTrafficPortPcpDEPairEntry 1 } cmEthernetTrafficPortPcpDEDropIneligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop ineligible priority." ::= { cmEthernetTrafficPortPcpDEPairEntry 2 } cmEthernetTrafficPortPcpDEDropEligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop eligible priority." ::= { cmEthernetTrafficPortPcpDEPairEntry 3 } -- -- Ethernet Traffic Port Cable Length Benchmark -- cmEthernetTrafficPortClbTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetTrafficPortClbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Traffic Port Cable Length Benchmark." ::= { cmFacilityObjects 65 } cmEthernetTrafficPortClbEntry OBJECT-TYPE SYNTAX CmEthernetTrafficPortClbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetTrafficPortClbTable. These entries represent Cable Length Benchmarks on the Ethernet Traffic Port." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, cmEthernetTrafficPortClbIndex } ::= { cmEthernetTrafficPortClbTable 1 } CmEthernetTrafficPortClbEntry ::= SEQUENCE { cmEthernetTrafficPortClbIndex Integer32, cmEthernetTrafficPortClbEnabled TruthValue, cmEthernetTrafficPortClbLength DisplayString, cmEthernetTrafficPortClbDescr DisplayString } cmEthernetTrafficPortClbIndex OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this Cable Length Benchmark Entry specification." ::= { cmEthernetTrafficPortClbEntry 1 } cmEthernetTrafficPortClbEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This enables specification of Cable Length Benchmark entry." ::= { cmEthernetTrafficPortClbEntry 2 } cmEthernetTrafficPortClbLength OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Cable length of Cable Points Entry. The cable length is of the form XXX[.YY] where XX can be any integer value and YY allows precision of 2 decimals after the floating point. Note that .YY is optional." ::= { cmEthernetTrafficPortClbEntry 3 } cmEthernetTrafficPortClbDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "A textual string containing description of cable span." ::= { cmEthernetTrafficPortClbEntry 4 } -- -- cmNeTrafficElementTable -- networkElementTMParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF NetworkElementTMParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries may be auto discovered, or can be explicitly created by SNMP Manager. Each remotely discovered shelf is represented as a row in this table." ::= { cmFacilityObjects 66 } networkElementTMParamsEntry OBJECT-TYPE SYNTAX NetworkElementTMParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the networkElementTMParamsTable." AUGMENTS { networkElementEntry } ::= { networkElementTMParamsTable 1 } NetworkElementTMParamsEntry ::= SEQUENCE { neTMParamsBandwidthProfileMode BandwidthProfileMode, neTMParamsAgingtime Integer32 } neTMParamsBandwidthProfileMode OBJECT-TYPE SYNTAX BandwidthProfileMode MAX-ACCESS read-create STATUS current DESCRIPTION "A Network Element level Bandwidth Profile Mode shall be supported which will indicate if the CIR/EIR is interpreted as Information Rate (IR) or Line Rate (LR). In IR mode BWP is enforced based on number of bytes beginning with DA and ending with FCS as it was received at a port which is called the Service Frame in MEF terminology. In LR mode the BWP is enforced based on the whole frame including IFG, Preamble and SFD." ::= { networkElementTMParamsEntry 1 } neTMParamsAgingtime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The object describe the system aging time." ::= { networkElementTMParamsEntry 2 } -- -- Access Port JDSU Ext Table -- cmEthernetAccPortJdsuExtTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetAccPortJdsuExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Access Port Facilities for JDSU configuration purposes." ::= { cmFacilityObjects 67 } cmEthernetAccPortJdsuExtEntry OBJECT-TYPE SYNTAX CmEthernetAccPortJdsuExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetAccPortJdsuExtTable." AUGMENTS { cmEthernetAccPortEntry } ::= { cmEthernetAccPortJdsuExtTable 1 } CmEthernetAccPortJdsuExtEntry ::= SEQUENCE { cmEthernetAccPortJDSUControlFramesSnoopingEnabled TruthValue, cmEthernetAccPortJDSULoopbackVlan VlanId, cmEthernetAccPortJDSULoopbackVlanList DisplayString } cmEthernetAccPortJDSUControlFramesSnoopingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests. FPGA shall not filter the JDSU control frames to processor. From enabled to disabled, if there is already a JDSU loopback on the port, release current loopback. JDSU loopback doesn't need port in maintenance state." ::= { cmEthernetAccPortJdsuExtEntry 1 } cmEthernetAccPortJDSULoopbackVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-only STATUS current DESCRIPTION "Applicable when port in JDSU VLAN loopback." ::= { cmEthernetAccPortJdsuExtEntry 2 } cmEthernetAccPortJDSULoopbackVlanList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The format is like 'OuterVid1-OuterPri1;InnerVid1-InnerPri1, OuterVid2-OuterPri2, OuterVid3-OuterPri3;InnerVid3-InnerPri3'('1-*;2-*, 3-*, 4-*;5-*')." ::= { cmEthernetAccPortJdsuExtEntry 3 } -- -- Network Port JDSU Ext Table -- cmEthernetNetPortJdsuExtTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetNetPortJdsuExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Network Port Facilities for JDSU configuration purposes." ::= { cmFacilityObjects 68 } cmEthernetNetPortJdsuExtEntry OBJECT-TYPE SYNTAX CmEthernetNetPortJdsuExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetNetPortJdsuExtTable." AUGMENTS { cmEthernetNetPortEntry } ::= { cmEthernetNetPortJdsuExtTable 1 } CmEthernetNetPortJdsuExtEntry ::= SEQUENCE { cmEthernetNetPortJDSUControlFramesSnoopingEnabled TruthValue, cmEthernetNetPortJDSULoopbackVlan VlanId, cmEthernetNetPortJDSULoopbackVlanList DisplayString } cmEthernetNetPortJDSUControlFramesSnoopingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests. FPGA shall not filter the JDSU control frames to processor. From enabled to disabled, if there is already a JDSU loopback on the port, release current loopback. JDSU loopback doesn't need port in maintenance state." ::= { cmEthernetNetPortJdsuExtEntry 1 } cmEthernetNetPortJDSULoopbackVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-only STATUS current DESCRIPTION "Applicable when port in JDSU VLAN loopback." ::= { cmEthernetNetPortJdsuExtEntry 2 } cmEthernetNetPortJDSULoopbackVlanList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The format is like 'OuterVid1-OuterPri1;InnerVid1-InnerPri1, OuterVid2-OuterPri2, OuterVid3-OuterPri3;InnerVid3-InnerPri3'('1-*;2-*, 3-*, 4-*;5-*')." ::= { cmEthernetNetPortJdsuExtEntry 3 } -- -- Ethernet Traffic Port LPBK entry -- cmEthernetTrafficPortLpbkTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetTrafficPortLpbkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Vlan loopback on Ethernet Traffic Port." ::= { cmFacilityObjects 69 } cmEthernetTrafficPortLpbkEntry OBJECT-TYPE SYNTAX CmEthernetTrafficPortLpbkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetTrafficPortLpbkTable. These entries represent Vlan loopback on the Ethernet Traffic Port." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, cmEthernetTrafficPortLpbkIndex } ::= { cmEthernetTrafficPortLpbkTable 1 } CmEthernetTrafficPortLpbkEntry ::= SEQUENCE { cmEthernetTrafficPortLpbkIndex Integer32, cmEthernetTrafficPortLpbkInnerVlanEnabled TruthValue, cmEthernetTrafficPortLpbkInnerVlanTag DisplayString, cmEthernetTrafficPortLpbkOuterVlanEnabled TruthValue, cmEthernetTrafficPortLpbkOuterVlanTag DisplayString, cmEthernetTrafficPortLpbkTime Integer32, cmEthernetTrafficPortLpbkStatus CmLoopbackType, cmEthernetTrafficPortLpbkConfig CmLoopbackType } cmEthernetTrafficPortLpbkIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify this vlan loopback entry." ::= { cmEthernetTrafficPortLpbkEntry 1 } cmEthernetTrafficPortLpbkInnerVlanEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object represent the inner vlan whether enabled." ::= { cmEthernetTrafficPortLpbkEntry 2 } cmEthernetTrafficPortLpbkInnerVlanTag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object represent the inner vlanid value and priority value. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetTrafficPortLpbkEntry 3 } cmEthernetTrafficPortLpbkOuterVlanEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object represent the outter vlan whether enabled." ::= { cmEthernetTrafficPortLpbkEntry 4 } cmEthernetTrafficPortLpbkOuterVlanTag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object represent the outter vlanid value and priority value. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back." ::= { cmEthernetTrafficPortLpbkEntry 5 } cmEthernetTrafficPortLpbkTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represent the vlan loopback time." ::= { cmEthernetTrafficPortLpbkEntry 6 } cmEthernetTrafficPortLpbkStatus OBJECT-TYPE SYNTAX CmLoopbackType MAX-ACCESS read-only STATUS current DESCRIPTION "This object represent the vlan loopback status." ::= { cmEthernetTrafficPortLpbkEntry 7 } cmEthernetTrafficPortLpbkConfig OBJECT-TYPE SYNTAX CmLoopbackType MAX-ACCESS read-write STATUS current DESCRIPTION "This object represent the vlan loopback action." ::= { cmEthernetTrafficPortLpbkEntry 8 } -- --Priority Mapping Profile Table -- cmPrioMapV2ProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF CmPrioMapV2ProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Priority Mappings V2 Profile." ::= { cmFacilityObjects 70 } cmPrioMapV2ProfileEntry OBJECT-TYPE SYNTAX CmPrioMapV2ProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmPrioMapV2ProfileTable." INDEX { cmPrioMapV2ProfileIndex } ::= { cmPrioMapV2ProfileTable 1 } CmPrioMapV2ProfileEntry ::= SEQUENCE { cmPrioMapV2ProfileIndex Integer32, cmPrioMapV2ProfileAlias DisplayString, cmPrioMapV2ProfileMapModeType PriorityMapMode, cmPrioMapV2ProfileStorageType StorageType, cmPrioMapV2ProfileRowStatus RowStatus, cmPrioMapV2ProfileIngressCosPriority VlanTagType, cmPrioMapV2ProfileCosMapModeType CosMappingMode, cmPrioMapV2ProfileCosMapControl TruthValue, cmPrioMapV2ProfileDefaultCos Unsigned32, cmPrioMapV2ProfileEgressCos Unsigned32 } cmPrioMapV2ProfileIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The integer index value describes the profile index." ::= { cmPrioMapV2ProfileEntry 1 } cmPrioMapV2ProfileAlias OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The integer index value describes the profile alias." ::= { cmPrioMapV2ProfileEntry 2 } cmPrioMapV2ProfileMapModeType OBJECT-TYPE SYNTAX PriorityMapMode MAX-ACCESS read-write STATUS current DESCRIPTION "The integer index value describes the profile PriorityMapMode." ::= { cmPrioMapV2ProfileEntry 3 } cmPrioMapV2ProfileStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmPrioMapV2ProfileEntry 4 } cmPrioMapV2ProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmPrioMapV2ProfileStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmPrioMapV2ProfileRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmPrioMapV2ProfileRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmPrioMapV2ProfileEntry 5 } cmPrioMapV2ProfileIngressCosPriority OBJECT-TYPE SYNTAX VlanTagType MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object is used to specify whether the profile uses the inner-tag or the outer-tag in determining the COS (Class of Service)." ::= { cmPrioMapV2ProfileEntry 6 } cmPrioMapV2ProfileCosMapModeType OBJECT-TYPE SYNTAX CosMappingMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify Cos mapping mode type." ::= { cmPrioMapV2ProfileEntry 7 } cmPrioMapV2ProfileCosMapControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to control whether has cmPrioMapV2PrioMappingCOSTable in profile." ::= { cmPrioMapV2ProfileEntry 8 } cmPrioMapV2ProfileDefaultCos OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify the Default COS to be used when the Ingress Priority Mapping function does not match." ::= { cmPrioMapV2ProfileEntry 9 } cmPrioMapV2ProfileEgressCos OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify the Default COS to be used when the Egress Priority Mapping function does not match." ::= { cmPrioMapV2ProfileEntry 10 } -- --Priority Mapping V2 Table -- cmPrioMapV2IngressPrioMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF CmPrioMapV2IngressPrioMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Priority Mappings." ::= { cmFacilityObjects 71 } cmPrioMapV2IngressPrioMappingEntry OBJECT-TYPE SYNTAX CmPrioMapV2IngressPrioMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmPrioMapV2IngressPrioMappingTable." INDEX { cmPrioMapV2ProfileIndex, cmPrioMapV2IngressPrioMappingIndex } ::= { cmPrioMapV2IngressPrioMappingTable 1 } CmPrioMapV2IngressPrioMappingEntry ::= SEQUENCE { cmPrioMapV2IngressPrioMappingIndex Integer32, cmPrioMapV2IngressPrioMappingInPriority Integer32, cmPrioMapV2IngressPrioMappingCOS Integer32 } cmPrioMapV2IngressPrioMappingIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of DSCP, valid indices are 1 to 64." ::= { cmPrioMapV2IngressPrioMappingEntry 1 } cmPrioMapV2IngressPrioMappingInPriority OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of DSCP, valid indices are 0 to 63." ::= { cmPrioMapV2IngressPrioMappingEntry 2 } cmPrioMapV2IngressPrioMappingCOS OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow." ::= { cmPrioMapV2IngressPrioMappingEntry 3 } -- --Priority Mapping V2 Table -- cmPrioMapV2PrioMappingCOSTable OBJECT-TYPE SYNTAX SEQUENCE OF CmPrioMapV2PrioMappingCOSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Priority Mappings." ::= { cmFacilityObjects 72 } cmPrioMapV2PrioMappingCOSEntry OBJECT-TYPE SYNTAX CmPrioMapV2PrioMappingCOSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmPrioMapV2PrioMappingCOSTable." INDEX { cmPrioMapV2ProfileIndex, cmPrioMapV2PrioMappingCOSIndex } ::= { cmPrioMapV2PrioMappingCOSTable 1 } CmPrioMapV2PrioMappingCOSEntry ::= SEQUENCE { cmPrioMapV2PrioMappingCOSIndex Integer32, cmPrioMapV2PrioMappingCOSValue Integer32, cmPrioMapV2PrioMappingCOSOuterTagPri Integer32, cmPrioMapV2PrioMappingCOSInnerTagPri Integer32, cmPrioMapV2PrioMappingEncapOuterTagPriority Integer32, cmPrioMapV2PrioMappingEncapInnerTagPriority Integer32, cmPrioMapV2PrioMappingEncapOuterDscpValue Integer32, cmPrioMapV2PrioMappingDscpValue Integer32 } cmPrioMapV2PrioMappingCOSIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of this entry." ::= { cmPrioMapV2PrioMappingCOSEntry 1 } cmPrioMapV2PrioMappingCOSValue OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "This allows specification of the COS Value, i.e. this helps in determining the appropriate COS Policer for the Flow." ::= { cmPrioMapV2PrioMappingCOSEntry 2 } cmPrioMapV2PrioMappingCOSOuterTagPri OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This allows specification of the VLAN priority that will replace the outgoing (A2N direction) outer-tag's priority." ::= { cmPrioMapV2PrioMappingCOSEntry 3 } cmPrioMapV2PrioMappingCOSInnerTagPri OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This allows specification of the VLAN priority that will replace the outgoing (A2N direction) inner-tag's (i.e. second tag) priority." ::= { cmPrioMapV2PrioMappingCOSEntry 4 } cmPrioMapV2PrioMappingEncapOuterTagPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows configuring encapsulation outer tag priority value of ingress cos mapping." ::= { cmPrioMapV2PrioMappingCOSEntry 5 } cmPrioMapV2PrioMappingEncapInnerTagPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows configuring encapsulation inner tag priority value of ingress cos mapping." ::= { cmPrioMapV2PrioMappingCOSEntry 6 } cmPrioMapV2PrioMappingEncapOuterDscpValue OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows configuring encapsulation outer DSCP value of ingress cos mapping." ::= { cmPrioMapV2PrioMappingCOSEntry 7 } cmPrioMapV2PrioMappingDscpValue OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows configuring DSCP value of ingress cos mapping." ::= { cmPrioMapV2PrioMappingCOSEntry 8 } -- --Priority Mapping V2 Table -- cmPrioMapV2PrioMappingPriTable OBJECT-TYPE SYNTAX SEQUENCE OF CmPrioMapV2PrioMappingPriEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Priority Mappings." ::= { cmFacilityObjects 73 } cmPrioMapV2PrioMappingPriEntry OBJECT-TYPE SYNTAX CmPrioMapV2PrioMappingPriEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmPrioMapV2PrioMappingPriTable." INDEX { cmPrioMapV2ProfileIndex, cmPrioMapV2PrioMappingPriIndex } ::= { cmPrioMapV2PrioMappingPriTable 1 } CmPrioMapV2PrioMappingPriEntry ::= SEQUENCE { cmPrioMapV2PrioMappingPriIndex Integer32, cmPrioMapV2PrioMappingPriInPrio Integer32, cmPrioMapV2PrioMappingPriPrioControl PrioMapControlType, cmPrioMapV2PrioMappingPriXTagPrio Integer32, cmPrioMapV2PrioMappingPriCOS Integer32 } cmPrioMapV2PrioMappingPriIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of DSCP, valid indices are 1 to 64." ::= { cmPrioMapV2PrioMappingPriEntry 1 } cmPrioMapV2PrioMappingPriInPrio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of DSCP, valid indices are 0 to 63." ::= { cmPrioMapV2PrioMappingPriEntry 2 } cmPrioMapV2PrioMappingPriPrioControl OBJECT-TYPE SYNTAX PrioMapControlType MAX-ACCESS read-write STATUS current DESCRIPTION "This allows specification of whether the priority of incoming X-TAG should be swapped with cmPrioMapV2XTagPriority." ::= { cmPrioMapV2PrioMappingPriEntry 3 } cmPrioMapV2PrioMappingPriXTagPrio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This allows specification of the VLAN priority that will replace the incoming X-TAG's priority. This is applicable with cmPrioMapV2XTagControl as 'swap'." ::= { cmPrioMapV2PrioMappingPriEntry 4 } cmPrioMapV2PrioMappingPriCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow." ::= { cmPrioMapV2PrioMappingPriEntry 5 } -- --cmPrioMapV2ProfileAppliedObjTable -- cmPrioMapV2ProfileAppliedObjTable OBJECT-TYPE SYNTAX SEQUENCE OF CmPrioMapV2ProfileAppliedObjEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Priority Mappings V2 Profile AppliedObj." ::= { cmFacilityObjects 74 } cmPrioMapV2ProfileAppliedObjEntry OBJECT-TYPE SYNTAX CmPrioMapV2ProfileAppliedObjEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmPrioMapV2ProfileAppliedObjTable." INDEX { cmPrioMapV2ProfileIndex, cmPrioMapV2ProfileAppliedObj } ::= { cmPrioMapV2ProfileAppliedObjTable 1 } CmPrioMapV2ProfileAppliedObjEntry ::= SEQUENCE { cmPrioMapV2ProfileAppliedObj VariablePointer } cmPrioMapV2ProfileAppliedObj OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "The object describe the profile Applied to. It maybe the access port or network port or flow etc." ::= { cmPrioMapV2ProfileAppliedObjEntry 1 } -- -- access port extension Table -- cmAccPortExtTable OBJECT-TYPE SYNTAX SEQUENCE OF CmAccPortExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Access Port for configuration purposes." ::= { cmFacilityObjects 75 } cmAccPortExtEntry OBJECT-TYPE SYNTAX CmAccPortExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmAccPortExtTable." AUGMENTS { cmEthernetAccPortEntry } ::= { cmAccPortExtTable 1 } CmAccPortExtEntry ::= SEQUENCE { cmAccPortExtMcastRateLimitEnabled TruthValue, cmAccPortExtMcastRateLimitSpeedLo Unsigned32, cmAccPortExtMcastRateLimitSpeedHi Unsigned32, cmAccPortExtBcastRateLimitEnabled TruthValue, cmAccPortExtBcastRateLimitSpeedLo Unsigned32, cmAccPortExtBcastRateLimitSpeedHi Unsigned32, cmAccPortExtCombinedRateLimitEnabled TruthValue, cmAccPortExtCombinedRateLimitSpeedLo Unsigned32, cmAccPortExtCombinedRateLimitSpeedHi Unsigned32, cmAccPortExtRefPrioMapProfile VariablePointer } cmAccPortExtMcastRateLimitEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether multicast packets need be limited on this port." ::= { cmAccPortExtEntry 1 } cmAccPortExtMcastRateLimitSpeedLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for multicast packets per port When cmAccPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits." ::= { cmAccPortExtEntry 2 } cmAccPortExtMcastRateLimitSpeedHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for multicast packets per port When cmAccPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits." ::= { cmAccPortExtEntry 3 } cmAccPortExtBcastRateLimitEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether broadcast packets need be limited per port." ::= { cmAccPortExtEntry 4 } cmAccPortExtBcastRateLimitSpeedLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for broadcast packets per port When cmAccPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits." ::= { cmAccPortExtEntry 5 } cmAccPortExtBcastRateLimitSpeedHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for broadcast packets per port When cmAccPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits." ::= { cmAccPortExtEntry 6 } cmAccPortExtCombinedRateLimitEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether multicast and broadcast packets need be limited per port." ::= { cmAccPortExtEntry 7 } cmAccPortExtCombinedRateLimitSpeedLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for multicast and broadcast packets per port. This objects only represents low 32 bits." ::= { cmAccPortExtEntry 8 } cmAccPortExtCombinedRateLimitSpeedHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for multicast and broadcast packets per port. This objects only represents high 32 bits." ::= { cmAccPortExtEntry 9 } cmAccPortExtRefPrioMapProfile OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set priority map profile." ::= { cmAccPortExtEntry 10 } -- -- Network port extension Table -- cmNetPortExtTable OBJECT-TYPE SYNTAX SEQUENCE OF CmNetPortExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Network Port for configuration purposes." ::= { cmFacilityObjects 76 } cmNetPortExtEntry OBJECT-TYPE SYNTAX CmNetPortExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmNetPortExtTable." AUGMENTS { cmEthernetNetPortEntry } ::= { cmNetPortExtTable 1 } CmNetPortExtEntry ::= SEQUENCE { cmNetPortExtMcastRateLimitEnabled TruthValue, cmNetPortExtMcastRateLimitSpeedLo Unsigned32, cmNetPortExtMcastRateLimitSpeedHi Unsigned32, cmNetPortExtBcastRateLimitEnabled TruthValue, cmNetPortExtBcastRateLimitSpeedLo Unsigned32, cmNetPortExtBcastRateLimitSpeedHi Unsigned32, cmNetPortExtCombinedRateLimitEnabled TruthValue, cmNetPortExtCombinedRateLimitSpeedLo Unsigned32, cmNetPortExtCombinedRateLimitSpeedHi Unsigned32, cmNetPortExtRefPrioMapProfile VariablePointer } cmNetPortExtMcastRateLimitEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether multicast packets need be limited on this port." ::= { cmNetPortExtEntry 1 } cmNetPortExtMcastRateLimitSpeedLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for multicast packets per port When cmNetPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits." ::= { cmNetPortExtEntry 2 } cmNetPortExtMcastRateLimitSpeedHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for multicast packets per port When cmNetPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits." ::= { cmNetPortExtEntry 3 } cmNetPortExtBcastRateLimitEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether broadcast packets need be limited per port." ::= { cmNetPortExtEntry 4 } cmNetPortExtBcastRateLimitSpeedLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for broadcast packets per port When cmNetPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits." ::= { cmNetPortExtEntry 5 } cmNetPortExtBcastRateLimitSpeedHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for broadcast packets per port When cmNetPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits." ::= { cmNetPortExtEntry 6 } cmNetPortExtCombinedRateLimitEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether multicast and broadcast packets need be limited per port." ::= { cmNetPortExtEntry 7 } cmNetPortExtCombinedRateLimitSpeedLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for multicast and broadcast packets per port. This objects only represents low 32 bits." ::= { cmNetPortExtEntry 8 } cmNetPortExtCombinedRateLimitSpeedHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiting for multicast and broadcast packets per port. This objects only represents high 32 bits." ::= { cmNetPortExtEntry 9 } cmNetPortExtRefPrioMapProfile OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set priority map profile." ::= { cmNetPortExtEntry 10 } -- -- usb WIFI dongle port Table -- f3UsbWIFIDonglePortTable OBJECT-TYPE SYNTAX SEQUENCE OF F3UsbWIFIDonglePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to wifi dongle Port for configuration purposes." ::= { cmFacilityObjects 77 } f3UsbWIFIDonglePortEntry OBJECT-TYPE SYNTAX F3UsbWIFIDonglePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3UsbWIFIDonglePortTable." INDEX { neIndex, shelfIndex, slotIndex, f3UsbHostIndex } ::= { f3UsbWIFIDonglePortTable 1 } F3UsbWIFIDonglePortEntry ::= SEQUENCE { f3UsbWIFIDonglePortIndex Integer32, f3UsbWIFIDonglePortIfIndex InterfaceIndex, f3UsbWIFIDonglePortEntityIndex PhysicalIndex, f3UsbWIFIDonglePortAdminState AdminState, f3UsbWIFIDonglePortOperationalState OperationalState, f3UsbWIFIDonglePortSecondaryState SecondaryState, f3UsbWIFIDonglePortSSID DisplayString, f3UsbWIFIDonglePortPassword DisplayString, f3UsbWIFIDonglePortEncryption WIFIEncryptionType, f3UsbWIFIDonglePortIPAddress IpAddress, f3UsbWIFIDonglePortwWIFIIPNetMask IpAddress, f3UsbWIFIDonglePortWIFIDHCPRole DHCPType, f3UsbWIFIDonglePortWIFIAllocatedIPFrom IpAddress, f3UsbWIFIDonglePortWIFIAllocatedIPEnd IpAddress, f3UsbWIFIDonglePortStorageType StorageType, f3UsbWIFIDonglePortRowStatus RowStatus, f3UsbWIFIDonglePortAccessdUsers DisplayString, f3UsbWIFIDonglePortName DisplayString } f3UsbWIFIDonglePortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify WIFI dongle port." ::= { f3UsbWIFIDonglePortEntry 1 } f3UsbWIFIDonglePortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the same value as ifIndex for WIFI dongle Port. An integer index value used to uniquely identify this Port" ::= { f3UsbWIFIDonglePortEntry 2 } f3UsbWIFIDonglePortEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Entity Index from ENTITY-MIB for this port." ::= { f3UsbWIFIDonglePortEntry 3 } f3UsbWIFIDonglePortAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of this Port." ::= { f3UsbWIFIDonglePortEntry 4 } f3UsbWIFIDonglePortOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of this Port." ::= { f3UsbWIFIDonglePortEntry 5 } f3UsbWIFIDonglePortSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of this Port." ::= { f3UsbWIFIDonglePortEntry 6 } f3UsbWIFIDonglePortSSID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the SSID value of this port." ::= { f3UsbWIFIDonglePortEntry 7 } f3UsbWIFIDonglePortPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the password value of this SSID." ::= { f3UsbWIFIDonglePortEntry 8 } f3UsbWIFIDonglePortEncryption OBJECT-TYPE SYNTAX WIFIEncryptionType MAX-ACCESS read-write STATUS current DESCRIPTION "The encryption type of this port." ::= { f3UsbWIFIDonglePortEntry 9 } f3UsbWIFIDonglePortIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of this port." ::= { f3UsbWIFIDonglePortEntry 10 } f3UsbWIFIDonglePortwWIFIIPNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address mask of this port." ::= { f3UsbWIFIDonglePortEntry 11 } f3UsbWIFIDonglePortWIFIDHCPRole OBJECT-TYPE SYNTAX DHCPType MAX-ACCESS read-only STATUS current DESCRIPTION "The DHCP role type of this port." ::= { f3UsbWIFIDonglePortEntry 12 } f3UsbWIFIDonglePortWIFIAllocatedIPFrom OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The start IP address could be allocated." ::= { f3UsbWIFIDonglePortEntry 13 } f3UsbWIFIDonglePortWIFIAllocatedIPEnd OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The last IP address could be allocated." ::= { f3UsbWIFIDonglePortEntry 14 } f3UsbWIFIDonglePortStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3UsbWIFIDonglePortEntry 15 } f3UsbWIFIDonglePortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3UsbWIFIDonglePortRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3UsbWIFIDonglePortRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3UsbWIFIDonglePortRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode." ::= { f3UsbWIFIDonglePortEntry 16 } f3UsbWIFIDonglePortAccessdUsers OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The users list of accessed via WIFI dongle port." ::= { f3UsbWIFIDonglePortEntry 17 } f3UsbWIFIDonglePortName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The WIFI dongle port name." ::= { f3UsbWIFIDonglePortEntry 18 } -- -- BITS 8 PORT GROUP (Building Integrated Timing System) Port -- bits8PortGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF Bits8PortGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to BITS 8 Port Group Facilities for configuration purposes." ::= { cmFacilityObjects 78 } bits8PortGroupEntry OBJECT-TYPE SYNTAX Bits8PortGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the bits8PortGroupTable." INDEX { neIndex, shelfIndex, slotIndex, bits8PortGroupIndex } ::= { bits8PortGroupTable 1 } Bits8PortGroupEntry ::= SEQUENCE { -- Port Indices bits8PortGroupIndex Integer32, bits8PortGroupIfIndex InterfaceIndex, -- State Management params bits8PortGroupAdminState AdminState, bits8PortGroupOperationalState OperationalState, bits8PortGroupSecondaryState SecondaryState, -- bits port specific params bits8PortGroupLineType BitsPortLineType, bits8PortGroupLineCode BitsPortLineCode, bits8PortGroupFrameFormat BitsFrameFormat, bits8PortGroupSaBitDesignation SaBitDesignation, --Synchronous Port params bits8PortGroupQLModeEnabled TruthValue, bits8PortGroupTransmitQL SSMQualityLevel, bits8PortGroupSquelchQL SSMQualityLevel, bits8PortGroupLineBuildOut LineBuildOut, bits8PortGroupImpedance BitsPortImpedanceMode, bits8PortGroupRowStatus RowStatus, bits8PortGroupActivePorts PortState, bits8PortGroupClkIfEnabledPorts PortState } -- bits8PortGroup Indices bits8PortGroupIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this BITS Port within the card. Note that each BITs Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, portIndex, bits8PortGroupIndex." ::= { bits8PortGroupEntry 1 } bits8PortGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this BITS Port within the card. Note that each BITs Port is uniquely identified by the indices neIndex, shelfIndex, slotIndex, bits8PortGroupIndex, bits8PortGroupIfIndex. " ::= { bits8PortGroupEntry 2 } -- State Management params bits8PortGroupAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the BITS 8 Port Group." ::= { bits8PortGroupEntry 3 } bits8PortGroupOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the BITS 8 Port Group." ::= { bits8PortGroupEntry 4 } bits8PortGroupSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the BITS 8 Port Group." ::= { bits8PortGroupEntry 5 } bits8PortGroupLineType OBJECT-TYPE SYNTAX BitsPortLineType MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the BITS 8 Port Group Line Type. Determines whether the T1/E1 BITS port operates in T1, E1, or 2048kHz mode." ::= { bits8PortGroupEntry 6 } bits8PortGroupLineCode OBJECT-TYPE SYNTAX BitsPortLineCode MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the BITS 8 Port Group Line Code. When the group is configured for a Line Type of T1, the valid values are t1-b8zs and t1-ami and the default value is t1-b8zs. When the group is configured for a Line Type of E1, the valid values are e1-hdb3 and e1-ami and the default value is e1-hdb3. When the group is configured for a Line Type of 2048kHz, the value is none." ::= { bits8PortGroupEntry 7 } bits8PortGroupFrameFormat OBJECT-TYPE SYNTAX BitsFrameFormat MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the BITS 8 Port Group Frame Format. When the group is configured for a Line Type of T1, the valid values are t1-sf and t1-esf and the default value is t1-esf. When the group is configured for a Line Type of E1, the valid values are e1-unframed, e1-crc4, and e1-dualFrame and the default value is e1-crc4. When the group is configured for a Line Type of 2048kHz, the value is none. R4.1CC and R4.3CC do not support e1-unframed." ::= { bits8PortGroupEntry 8 } bits8PortGroupSaBitDesignation OBJECT-TYPE SYNTAX SaBitDesignation MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the BITS 8 Port Group Sa Bit Designation. Determines which E1 Sa Bit is used to transmit/receive the SSM. For T1 and 2048khz Line Types, the only allowed value is None. For E1 Line Type, the default value is bit4 and it can only have a value of None if QL Mode is disabled, otherwise, None is an invalid value." ::= { bits8PortGroupEntry 9 } bits8PortGroupQLModeEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to specify whether the BITS 8 Port Group can be enabled/disabled for QL Mode. When enabled, on receive side -port shall PEER the SSM (Sync Status Messages) slow protocol PDUs and take appropriate action When enabled, on transmit side -port shall periodically (once a second) transmit QL TLV information PDUs When disabled, on receive side, -port shall terminate and discard any SSM slow protocol PDUs When disabled, on transmit side -port shall not transmit any SSM slow protocol PDUs." ::= { bits8PortGroupEntry 10 } bits8PortGroupTransmitQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the Transmitted QL value for the BITS 8 Port Group. If the BITS group's QL Mode is disabled, then the received QL value is not applicable." ::= { bits8PortGroupEntry 11 } bits8PortGroupSquelchQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set the Squelch QL for the BITS 8 Port Group. The Squelch QL is only meaningful if the QL Mode is Enabled. The Squelch QL is used to determine whether or not to squelch the output of the BITS 8 Port Group. If the system's QL is lower than the Squelch QL, the output is squelched. If the BITS group's QL Mode is disabled, then the received QL value is not applicable." ::= { bits8PortGroupEntry 12 } bits8PortGroupLineBuildOut OBJECT-TYPE SYNTAX LineBuildOut MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the line build out on the BITS 8 Port Group when the Line Type is T1." ::= { bits8PortGroupEntry 13 } bits8PortGroupImpedance OBJECT-TYPE SYNTAX BitsPortImpedanceMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the line impedance mode for the BITS 8 Port Group." ::= { bits8PortGroupEntry 14 } bits8PortGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of bits8PortGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with bits8PortGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The bits8PortGroupRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { bits8PortGroupEntry 15 } bits8PortGroupActivePorts OBJECT-TYPE SYNTAX PortState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Active State for each port of the BITS 8 Port Group." ::= { bits8PortGroupEntry 16 } bits8PortGroupClkIfEnabledPorts OBJECT-TYPE SYNTAX PortState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Clock Enabling State for each port of the BITS 8 Port Group." ::= { bits8PortGroupEntry 17 } -- -- PPS 16 port group -- pps16PortGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF Pps16PortGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Pulse Per Second Port Facilities." ::= { cmFacilityObjects 79 } pps16PortGroupEntry OBJECT-TYPE SYNTAX Pps16PortGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the pps16PortGroupTable." INDEX { neIndex, shelfIndex, slotIndex, pps16PortGroupIndex } ::= { pps16PortGroupTable 1 } Pps16PortGroupEntry ::= SEQUENCE { -- Port Indices pps16PortGroupIndex Integer32, pps16PortGroupIfIndex InterfaceIndex, -- State Management params pps16PortGroupAdminState AdminState, pps16PortGroupOperationalState OperationalState, pps16PortGroupSecondaryState SecondaryState, pps16PortGroupAlias DisplayString, -- port specific params pps16PortGroupSquelchControl SquelchControl, pps16PortGroupTODSource VariablePointer, pps16PortGroupDirection SignalDirectionType, pps16PortGroupDelayCompensation Integer32, pps16PortGroupRowStatus RowStatus -- pps16PortGroupOutputType PPSPhyInterfaceType } pps16PortGroupIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this Pulse Per Second Port within the card." ::= { pps16PortGroupEntry 1 } pps16PortGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the same value as ifIndex for Pulse Per Second Port. An integer index value used to uniquely identify this Pulse Per Second Port." ::= { pps16PortGroupEntry 2 } -- State Management params pps16PortGroupAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Administrative State of the Pulse Per Second Port." ::= { pps16PortGroupEntry 3 } pps16PortGroupOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the Pulse Per Second Port." ::= { pps16PortGroupEntry 4 } pps16PortGroupSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Pulse Per Second Port." ::= { pps16PortGroupEntry 5 } pps16PortGroupAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows SNMP management entities to provide an alias to the gps 10MHz Port entity." ::= { pps16PortGroupEntry 6 } pps16PortGroupSquelchControl OBJECT-TYPE SYNTAX SquelchControl MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows to set the Squelch Control for the Pulse Per Second port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port." ::= { pps16PortGroupEntry 7 } pps16PortGroupTODSource OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows to set the Pulse Per Second Source for the Port." ::= { pps16PortGroupEntry 8 } pps16PortGroupDirection OBJECT-TYPE SYNTAX SignalDirectionType MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows specification of the signal type (i.e. input or output)." ::= { pps16PortGroupEntry 9 } pps16PortGroupDelayCompensation OBJECT-TYPE SYNTAX Integer32 (0..90) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the PPS external Delay Compensation in nanoseconds. The valid values are 0 to 96 in 8 nanoseconds steps. Values which are not multiple of 8 will be automatically rounded up to the next multiple of 8." ::= { pps16PortGroupEntry 10 } pps16PortGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of pps16PortGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with pps16PortGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The pps16PortGroupRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { pps16PortGroupEntry 11 } --pps16PortGroupOutputType OBJECT-TYPE -- SYNTAX PPSPhyInterfaceType -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object specify PPS physical interface type." -- ::= { pps16PortGroupEntry 11 } -- -- CLK 16 port group -- clk16PortGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF Clk16PortGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Pulse Per Second Port Facilities." ::= { cmFacilityObjects 80 } clk16PortGroupEntry OBJECT-TYPE SYNTAX Clk16PortGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the clk16PortGroupTable." INDEX { neIndex, shelfIndex, slotIndex, clk16PortGroupIndex } ::= { clk16PortGroupTable 1 } Clk16PortGroupEntry ::= SEQUENCE { -- Port Indices clk16PortGroupIndex Integer32, clk16PortGroupIfIndex InterfaceIndex, -- State Management params clk16PortGroupAdminState AdminState, clk16PortGroupOperationalState OperationalState, clk16PortGroupSecondaryState SecondaryState, clk16PortGroupAlias DisplayString, -- port specific params clk16PortGroupDirection SignalDirectionType, clk16PortGroupSquelchControl SquelchControl, clk16PortGroupSquelchQL SSMQualityLevel, clk16PortGroupRowStatus RowStatus } clk16PortGroupIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this Pulse Per Second Port within the card." ::= { clk16PortGroupEntry 1 } clk16PortGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the same value as ifIndex for Pulse Per Second Port. An integer index value used to uniquely identify this Pulse Per Second Port." ::= { clk16PortGroupEntry 2 } -- State Management params clk16PortGroupAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Administrative State of the Pulse Per Second Port." ::= { clk16PortGroupEntry 3 } clk16PortGroupOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the Pulse Per Second Port." ::= { clk16PortGroupEntry 4 } clk16PortGroupSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Pulse Per Second Port." ::= { clk16PortGroupEntry 5 } clk16PortGroupAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows SNMP management entities to provide an alias to the gps 10MHz Port entity." ::= { clk16PortGroupEntry 6 } clk16PortGroupDirection OBJECT-TYPE SYNTAX SignalDirectionType MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows specification of the signal type (i.e. input or output)." ::= { clk16PortGroupEntry 7 } clk16PortGroupSquelchControl OBJECT-TYPE SYNTAX SquelchControl MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows to set the Squelch Control for the Pulse Per Second port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port." ::= { clk16PortGroupEntry 8 } clk16PortGroupSquelchQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows to set the Squelch QL for the 10MHz port. This value is used when f310MHzClockPortSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched." ::= { clk16PortGroupEntry 9 } clk16PortGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of clk16PortGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with clk16PortGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The clk16PortGroupRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { clk16PortGroupEntry 10 } -- -- TodPps 16 Port -- todPps16PortGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF TodPps16PortGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Time Of Day Port Facilities." ::= { cmFacilityObjects 81 } todPps16PortGroupEntry OBJECT-TYPE SYNTAX TodPps16PortGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the todPps16PortGroupTable." INDEX { neIndex, shelfIndex, slotIndex, todPps16PortGroupIndex } ::= { todPps16PortGroupTable 1 } TodPps16PortGroupEntry ::= SEQUENCE { -- Port Indices todPps16PortGroupIndex Integer32, todPps16PortGroupIfIndex InterfaceIndex, -- State Management params todPps16PortGroupAdminState AdminState, todPps16PortGroupOperationalState OperationalState, todPps16PortGroupSecondaryState SecondaryState, todPps16PortGroupAlias DisplayString, -- port specific params todPps16PortGroupSquelchControl SquelchControl, todPps16PortGroupSquelchQL SSMQualityLevel, todPps16PortGroupTODSource VariablePointer, todPps16PortGroupOutputFormat TODOutputFormat, todPps16PortGroupDelayCompensation Integer32, todPps16PortGroupRowStatus RowStatus } todPps16PortGroupIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this Time Of Day Port within the card." ::= { todPps16PortGroupEntry 1 } todPps16PortGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object has the same value as ifIndex for Time Of Day Port. An integer index value used to uniquely identify this Time Of Day Port." ::= { todPps16PortGroupEntry 2 } -- State Management params todPps16PortGroupAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Administrative State of the Time Of Day Port." ::= { todPps16PortGroupEntry 3 } todPps16PortGroupOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the Time Of Day Port." ::= { todPps16PortGroupEntry 4 } todPps16PortGroupSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Time Of Day Port." ::= { todPps16PortGroupEntry 5 } todPps16PortGroupAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows SNMP management entities to provide an alias to the gps 10MHz Port entity." ::= { todPps16PortGroupEntry 6 } todPps16PortGroupSquelchControl OBJECT-TYPE SYNTAX SquelchControl MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows to set the Squelch Control for the Time Of Day port. The Squelch Control is used to determine the type of squelch control used to squelch the output of the TOD port." ::= { todPps16PortGroupEntry 7 } todPps16PortGroupSquelchQL OBJECT-TYPE SYNTAX SSMQualityLevel MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows to set the Squelch QL for the Time Of Day port. This value is used when todPps16PortGroupSquelchControl is squelch-ql. The Squelch QL is used to determine whether or not to squelch the output of the TOD port. If the system's QL is lower than the Squelch QL, the output is squelched." ::= { todPps16PortGroupEntry 8 } todPps16PortGroupTODSource OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows to set the Time Of Day Source for the Port." ::= { todPps16PortGroupEntry 9 } todPps16PortGroupOutputFormat OBJECT-TYPE SYNTAX TODOutputFormat MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows to set the Output Format for the Time Of Day port. The Output Format is used to determine the type of output format of the TOD port." ::= { todPps16PortGroupEntry 10 } todPps16PortGroupDelayCompensation OBJECT-TYPE SYNTAX Integer32 (0..90) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the PPS external Delay Compensation in nanoseconds. The valid values are 0 to 96 in 8 nanoseconds steps. Values which are not multiple of 8 will be automatically rounded up to the next multiple of 8." ::= { todPps16PortGroupEntry 11 } todPps16PortGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of clk16PortGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with todPps16PortGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The clk16PortGroupRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { todPps16PortGroupEntry 12 } -- -- Policer Envelope Table -- f3PolicerEnvelopeTable OBJECT-TYPE SYNTAX SEQUENCE OF F3PolicerEnvelopeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to policer envelope for configuration purposes." ::= { cmFacilityObjects 82 } f3PolicerEnvelopeEntry OBJECT-TYPE SYNTAX F3PolicerEnvelopeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3PolicerEnvelopeTable." INDEX { neIndex, f3PolicerEnvelopeIndex } ::= { f3PolicerEnvelopeTable 1 } F3PolicerEnvelopeEntry ::= SEQUENCE { f3PolicerEnvelopeIndex Integer32, f3PolicerEnvelopeCouplingFlag TruthValue, f3PolicerEnvelopeStorageType StorageType, f3PolicerEnvelopeRowStatus RowStatus } f3PolicerEnvelopeIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify policer envelope." ::= { f3PolicerEnvelopeEntry 1 } f3PolicerEnvelopeCouplingFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of Policer Envelope Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow, which is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level" ::= { f3PolicerEnvelopeEntry 2 } f3PolicerEnvelopeStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3PolicerEnvelopeEntry 3 } f3PolicerEnvelopeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3PolicerEnvelopeRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3UsbWIFIDonglePortRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3PolicerEnvelopeRowStatus object may be modified if the associated instance of this object is equal to active(1). Note that flow creation and deletion is only supported with access port in connection-oriented evpl mode." ::= { f3PolicerEnvelopeEntry 4 } -- -- Envelope Assoc Policer Flows -- f3EnvelopeAssocPolicerTable OBJECT-TYPE SYNTAX SEQUENCE OF F3EnvelopeAssocPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Flows which are envelope associated policers instance" ::= { cmFacilityObjects 83 } f3EnvelopeAssocPolicerEntry OBJECT-TYPE SYNTAX F3EnvelopeAssocPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3EnvelopeAssocPolicerTable." INDEX { neIndex, f3PolicerEnvelopeIndex, f3EnvelopeAssocPolicer } ::= { f3EnvelopeAssocPolicerTable 1 } F3EnvelopeAssocPolicerEntry ::= SEQUENCE { f3EnvelopeAssocPolicer VariablePointer } f3EnvelopeAssocPolicer OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "Pointer to a policer instance which is associated with envelope." ::= { f3EnvelopeAssocPolicerEntry 1 } -- -- Network Port Exp encoding table -- cmNetPortExpDEEncTable OBJECT-TYPE SYNTAX SEQUENCE OF CmNetPortExpDEEncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Network Port Exp drop eligibility encoding table. This is applied to a frame that is egressing at the Network port." ::= { cmFacilityObjects 84 } cmNetPortExpDEEncEntry OBJECT-TYPE SYNTAX CmNetPortExpDEEncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmNetPortExpDEEncTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex, cmNetPortExpDEEncIndex } ::= { cmNetPortExpDEEncTable 1 } CmNetPortExpDEEncEntry ::= SEQUENCE { cmNetPortExpDEEncIndex Integer32, cmNetPortExpDEEncInPriority VlanPriority, cmNetPortExpDEEncDropIneligiblePrio VlanPriority, cmNetPortExpDEEncDropEligiblePrio VlanPriority } cmNetPortExpDEEncIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the Exp drop eligible encoding table." ::= { cmNetPortExpDEEncEntry 1 } cmNetPortExpDEEncInPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority." ::= { cmNetPortExpDEEncEntry 2 } cmNetPortExpDEEncDropIneligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the Exp value that has a priority value with implicit drop ineligibility encoded into it." ::= { cmNetPortExpDEEncEntry 3 } cmNetPortExpDEEncDropEligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the Exp value that has a priority value with implicit drop eligibility encoded into it." ::= { cmNetPortExpDEEncEntry 4 } -- -- Network Port Exp decoding table -- cmNetPortExpDEDecTable OBJECT-TYPE SYNTAX SEQUENCE OF CmNetPortExpDEDecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Network Port Exp drop eligibility decoding table. This is applied to a frame that is ingressing at a port." ::= { cmFacilityObjects 85 } cmNetPortExpDEDecEntry OBJECT-TYPE SYNTAX CmNetPortExpDEDecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmNetPortExpDEDecTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex, cmNetPortExpDEDecIndex } ::= { cmNetPortExpDEDecTable 1 } CmNetPortExpDEDecEntry ::= SEQUENCE { cmNetPortExpDEDecIndex Integer32, cmNetPortExpDEDecInPriority VlanPriority, cmNetPortExpDEDecOutPriority VlanPriority, cmNetPortExpDEDecDropEligible TruthValue } cmNetPortExpDEDecIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the Exp drop eligible decoding table." ::= { cmNetPortExpDEDecEntry 1 } cmNetPortExpDEDecInPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the input priority that is decoded to get priority and the drop eligibility of a frame." ::= { cmNetPortExpDEDecEntry 2 } cmNetPortExpDEDecOutPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the priority value decoded from a incoming Exp value." ::= { cmNetPortExpDEDecEntry 3 } cmNetPortExpDEDecDropEligible OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop eligibility decoded from a incoming Exp value." ::= { cmNetPortExpDEDecEntry 4 } -- -- Network Port Exp pair table -- cmNetPortExpDEPairTable OBJECT-TYPE SYNTAX SEQUENCE OF CmNetPortExpDEPairEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Network Port Exp drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the Exp DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D." ::= { cmFacilityObjects 86 } cmNetPortExpDEPairEntry OBJECT-TYPE SYNTAX CmNetPortExpDEPairEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmNetPortExpDEPairEntry." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex, cmNetPortExpDEPairIndex } ::= { cmNetPortExpDEPairTable 1 } CmNetPortExpDEPairEntry ::= SEQUENCE { cmNetPortExpDEPairIndex Integer32, cmNetPortExpDEDropIneligiblePrio VlanPriority, cmNetPortExpDEDropEligiblePrio VlanPriority } cmNetPortExpDEPairIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the Exp drop eligible priority pair table." ::= { cmNetPortExpDEPairEntry 1 } cmNetPortExpDEDropIneligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop ineligible priority." ::= { cmNetPortExpDEPairEntry 2 } cmNetPortExpDEDropEligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop eligible priority." ::= { cmNetPortExpDEPairEntry 3 } -- -- Network Port IpPrec encoding table -- cmNetPortIpPrecDEEncTable OBJECT-TYPE SYNTAX SEQUENCE OF CmNetPortIpPrecDEEncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Network Port IpPrec drop eligibility encoding table. This is applied to a frame that is egressing at the Network port." ::= { cmFacilityObjects 87 } cmNetPortIpPrecDEEncEntry OBJECT-TYPE SYNTAX CmNetPortIpPrecDEEncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmNetPortIpPrecDEEncTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex, cmNetPortIpPrecDEEncIndex } ::= { cmNetPortIpPrecDEEncTable 1 } CmNetPortIpPrecDEEncEntry ::= SEQUENCE { cmNetPortIpPrecDEEncIndex Integer32, cmNetPortIpPrecDEEncInPriority VlanPriority, cmNetPortIpPrecDEEncDropIneligiblePrio VlanPriority, cmNetPortIpPrecDEEncDropEligiblePrio VlanPriority } cmNetPortIpPrecDEEncIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the IpPrec drop eligible encoding table." ::= { cmNetPortIpPrecDEEncEntry 1 } cmNetPortIpPrecDEEncInPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority." ::= { cmNetPortIpPrecDEEncEntry 2 } cmNetPortIpPrecDEEncDropIneligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the IpPrec value that has a priority value with implicit drop ineligibility encoded into it." ::= { cmNetPortIpPrecDEEncEntry 3 } cmNetPortIpPrecDEEncDropEligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the IpPrec value that has a priority value with implicit drop eligibility encoded into it." ::= { cmNetPortIpPrecDEEncEntry 4 } -- -- Network Port IpPrec decoding table -- cmNetPortIpPrecDEDecTable OBJECT-TYPE SYNTAX SEQUENCE OF CmNetPortIpPrecDEDecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Network Port IpPrec drop eligibility decoding table. This is applied to a frame that is ingressing at a port." ::= { cmFacilityObjects 88 } cmNetPortIpPrecDEDecEntry OBJECT-TYPE SYNTAX CmNetPortIpPrecDEDecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmNetPortIpPrecDEDecTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex, cmNetPortIpPrecDEDecIndex } ::= { cmNetPortIpPrecDEDecTable 1 } CmNetPortIpPrecDEDecEntry ::= SEQUENCE { cmNetPortIpPrecDEDecIndex Integer32, cmNetPortIpPrecDEDecInPriority VlanPriority, cmNetPortIpPrecDEDecOutPriority VlanPriority, cmNetPortIpPrecDEDecDropEligible TruthValue } cmNetPortIpPrecDEDecIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the IpPrec drop eligible decoding table." ::= { cmNetPortIpPrecDEDecEntry 1 } cmNetPortIpPrecDEDecInPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the input priority that is decoded to get priority and the drop eligibility of a frame." ::= { cmNetPortIpPrecDEDecEntry 2 } cmNetPortIpPrecDEDecOutPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the priority value decoded from a incoming IpPrec value." ::= { cmNetPortIpPrecDEDecEntry 3 } cmNetPortIpPrecDEDecDropEligible OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop eligibility decoded from a incoming IpPrec value." ::= { cmNetPortIpPrecDEDecEntry 4 } -- -- Network Port IpPrec pair table -- cmNetPortIpPrecDEPairTable OBJECT-TYPE SYNTAX SEQUENCE OF CmNetPortIpPrecDEPairEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Network Port IpPrec drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the IpPrec DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D." ::= { cmFacilityObjects 89 } cmNetPortIpPrecDEPairEntry OBJECT-TYPE SYNTAX CmNetPortIpPrecDEPairEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmNetPortIpPrecDEPairEntry." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex, cmNetPortIpPrecDEPairIndex } ::= { cmNetPortIpPrecDEPairTable 1 } CmNetPortIpPrecDEPairEntry ::= SEQUENCE { cmNetPortIpPrecDEPairIndex Integer32, cmNetPortIpPrecDEDropIneligiblePrio VlanPriority, cmNetPortIpPrecDEDropEligiblePrio VlanPriority } cmNetPortIpPrecDEPairIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the IpPrec drop eligible priority pair table." ::= { cmNetPortIpPrecDEPairEntry 1 } cmNetPortIpPrecDEDropIneligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop ineligible priority." ::= { cmNetPortIpPrecDEPairEntry 2 } cmNetPortIpPrecDEDropEligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop eligible priority." ::= { cmNetPortIpPrecDEPairEntry 3 } -- -- Network Port EncapPcp encoding table -- cmNetPortEncapPcpDEEncTable OBJECT-TYPE SYNTAX SEQUENCE OF CmNetPortEncapPcpDEEncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Network Port EncapPcp drop eligibility encoding table. This is applied to a frame that is egressing at the Network port." ::= { cmFacilityObjects 90 } cmNetPortEncapPcpDEEncEntry OBJECT-TYPE SYNTAX CmNetPortEncapPcpDEEncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmNetPortEncapPcpDEEncTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex, cmNetPortEncapPcpDEEncIndex } ::= { cmNetPortEncapPcpDEEncTable 1 } CmNetPortEncapPcpDEEncEntry ::= SEQUENCE { cmNetPortEncapPcpDEEncIndex Integer32, cmNetPortEncapPcpDEEncInPriority VlanPriority, cmNetPortEncapPcpDEEncDropIneligiblePrio VlanPriority, cmNetPortEncapPcpDEEncDropEligiblePrio VlanPriority } cmNetPortEncapPcpDEEncIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the EncapPcp drop eligible encoding table." ::= { cmNetPortEncapPcpDEEncEntry 1 } cmNetPortEncapPcpDEEncInPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority." ::= { cmNetPortEncapPcpDEEncEntry 2 } cmNetPortEncapPcpDEEncDropIneligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the EncapPcp value that has a priority value with implicit drop ineligibility encoded into it." ::= { cmNetPortEncapPcpDEEncEntry 3 } cmNetPortEncapPcpDEEncDropEligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the EncapPcp value that has a priority value with implicit drop eligibility encoded into it." ::= { cmNetPortEncapPcpDEEncEntry 4 } -- -- Network Port EncapPcp decoding table -- cmNetPortEncapPcpDEDecTable OBJECT-TYPE SYNTAX SEQUENCE OF CmNetPortEncapPcpDEDecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Network Port EncapPcp drop eligibility decoding table. This is applied to a frame that is ingressing at a port." ::= { cmFacilityObjects 91 } cmNetPortEncapPcpDEDecEntry OBJECT-TYPE SYNTAX CmNetPortEncapPcpDEDecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmNetPortEncapPcpDEDecTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex, cmNetPortEncapPcpDEDecIndex } ::= { cmNetPortEncapPcpDEDecTable 1 } CmNetPortEncapPcpDEDecEntry ::= SEQUENCE { cmNetPortEncapPcpDEDecIndex Integer32, cmNetPortEncapPcpDEDecInPriority VlanPriority, cmNetPortEncapPcpDEDecOutPriority VlanPriority, cmNetPortEncapPcpDEDecDropEligible TruthValue } cmNetPortEncapPcpDEDecIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the EncapPcp drop eligible decoding table." ::= { cmNetPortEncapPcpDEDecEntry 1 } cmNetPortEncapPcpDEDecInPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the input priority that is decoded to get priority and the drop eligibility of a frame." ::= { cmNetPortEncapPcpDEDecEntry 2 } cmNetPortEncapPcpDEDecOutPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the priority value decoded from a incoming EncapPcp value." ::= { cmNetPortEncapPcpDEDecEntry 3 } cmNetPortEncapPcpDEDecDropEligible OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop eligibility decoded from a incoming EncapPcp value." ::= { cmNetPortEncapPcpDEDecEntry 4 } -- -- Network Port EncapPcp pair table -- cmNetPortEncapPcpDEPairTable OBJECT-TYPE SYNTAX SEQUENCE OF CmNetPortEncapPcpDEPairEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Network Port EncapPcp drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the EncapPcp DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D." ::= { cmFacilityObjects 92 } cmNetPortEncapPcpDEPairEntry OBJECT-TYPE SYNTAX CmNetPortEncapPcpDEPairEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmNetPortEncapPcpDEPairEntry." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetNetPortIndex, cmNetPortEncapPcpDEPairIndex } ::= { cmNetPortEncapPcpDEPairTable 1 } CmNetPortEncapPcpDEPairEntry ::= SEQUENCE { cmNetPortEncapPcpDEPairIndex Integer32, cmNetPortEncapPcpDEDropIneligiblePrio VlanPriority, cmNetPortEncapPcpDEDropEligiblePrio VlanPriority } cmNetPortEncapPcpDEPairIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the EncapPcp drop eligible priority pair table." ::= { cmNetPortEncapPcpDEPairEntry 1 } cmNetPortEncapPcpDEDropIneligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop ineligible priority." ::= { cmNetPortEncapPcpDEPairEntry 2 } cmNetPortEncapPcpDEDropEligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop eligible priority." ::= { cmNetPortEncapPcpDEPairEntry 3 } f3SatelliteTable OBJECT-TYPE SYNTAX SEQUENCE OF F3SatelliteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of GNSS Satellite entries on the NIDs." ::= { cmFacilityObjects 93 } f3SatelliteEntry OBJECT-TYPE SYNTAX F3SatelliteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3SatelliteTable Entries can be created/deleted in this table by management application action." INDEX { f3SatelliteIndex } ::= { f3SatelliteTable 1 } F3SatelliteEntry ::= SEQUENCE { f3SatelliteIndex Unsigned32, f3SatelliteSV Unsigned32, f3SatelliteInUse TruthValue, f3SatelliteSVType ConstellationTypesBitMap, f3SatelliteCNO Unsigned32, f3SatelliteHealth SatelliteHealth, f3SatelliteAzimuth Unsigned32, f3SatelliteElevation Unsigned32, f3SatelliteGnssReceiverPort VariablePointer } f3SatelliteIndex OBJECT-TYPE SYNTAX Unsigned32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify this Satellite Entry in the f3SatelliteTable." ::= { f3SatelliteEntry 1 } f3SatelliteInUse OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the Satellite Entry been used by GNSS receiver. It is supported only on OSA542x devices." ::= { f3SatelliteEntry 2 } f3SatelliteSV OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Satellite Entry SV PRN number." ::= { f3SatelliteEntry 3 } f3SatelliteSVType OBJECT-TYPE SYNTAX ConstellationTypesBitMap MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Satellite Entry Constellation Type." ::= { f3SatelliteEntry 4 } f3SatelliteCNO OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Satellite Entry Signal Level (Carrier-to-Noise power ratio) in dB-Hz units." ::= { f3SatelliteEntry 5 } f3SatelliteHealth OBJECT-TYPE SYNTAX SatelliteHealth MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Satellite Entry Health." ::= { f3SatelliteEntry 6 } f3SatelliteAzimuth OBJECT-TYPE SYNTAX Unsigned32 (0..360) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Satellite Entry Azimuth Angle in degrees." ::= { f3SatelliteEntry 7 } f3SatelliteElevation OBJECT-TYPE SYNTAX Unsigned32 (0..90) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Satellite Entry Elevation Angle in degrees." ::= { f3SatelliteEntry 8 } f3SatelliteGnssReceiverPort OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the GNSS Receiver Port OID related to this Satellite Entry." ::= { f3SatelliteEntry 9 } -- -- Traffic Port JDSU Ext Table -- cmEthernetTrafficPortJdsuExtTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetTrafficPortJdsuExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Traffic Port Facilities for JDSU configuration purposes." ::= { cmFacilityObjects 94 } cmEthernetTrafficPortJdsuExtEntry OBJECT-TYPE SYNTAX CmEthernetTrafficPortJdsuExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetTrafficPortJdsuExtTable." AUGMENTS { cmEthernetTrafficPortEntry } ::= { cmEthernetTrafficPortJdsuExtTable 1 } CmEthernetTrafficPortJdsuExtEntry ::= SEQUENCE { cmEthernetTrafficPortJDSUControlFramesSnoopingEnabled TruthValue, cmEthernetTrafficPortJDSULoopbackVlan VlanId, cmEthernetTrafficPortJDSULoopbackVlanList DisplayString } cmEthernetTrafficPortJDSUControlFramesSnoopingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests. FPGA shall not filter the JDSU control frames to processor. From enabled to disabled, if there is already a JDSU loopback on the port, release current loopback. JDSU loopback doesn't need port in maintenance state." ::= { cmEthernetTrafficPortJdsuExtEntry 1 } cmEthernetTrafficPortJDSULoopbackVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-only STATUS current DESCRIPTION "Applicable when port in JDSU VLAN loopback." ::= { cmEthernetTrafficPortJdsuExtEntry 2 } cmEthernetTrafficPortJDSULoopbackVlanList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The format is like 'OuterVid1-OuterPri1;InnerVid1-InnerPri1, OuterVid2-OuterPri2, OuterVid3-OuterPri3;InnerVid3-InnerPri3'('1-*;2-*, 3-*, 4-*;5-*')." ::= { cmEthernetTrafficPortJdsuExtEntry 3 } -- -- Flow Point QoS Shaper -- f3FpQosShaperTable OBJECT-TYPE SYNTAX SEQUENCE OF F3FpQosShaperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Flow Point Quality of Service Shaper for configuration purposes." ::= { cmFacilityObjects 95 } f3FpQosShaperEntry OBJECT-TYPE SYNTAX F3FpQosShaperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3FpQosShaperTable. These entries represent an Flow Point Quality of Service Shaper." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, cmFlowPointIndex, f3FpQosShaperIndex } ::= { f3FpQosShaperTable 1 } F3FpQosShaperEntry ::= SEQUENCE { f3FpQosShaperIndex Integer32, f3FpQosShaperAdminState AdminState, f3FpQosShaperOperationalState OperationalState, f3FpQosShaperSecondaryState SecondaryState, f3FpQosShaperCIRLo Unsigned32, f3FpQosShaperCIRHi Unsigned32, f3FpQosShaperEIRLo Unsigned32, f3FpQosShaperEIRHi Unsigned32, f3FpQosShaperCBS Unsigned32, f3FpQosShaperEBS Unsigned32, f3FpQosShaperBufferSize Unsigned32, f3FpQosShaperCOS Integer32, f3FpQosShaperStorageType StorageType, f3FpQosShaperRowStatus RowStatus, f3FpQosShaperWfqWeight Integer32 } f3FpQosShaperIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique integer index value corresponding to a Quality of Service Shaper." ::= { f3FpQosShaperEntry 1 } f3FpQosShaperAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Administrative State of a Shaper." ::= { f3FpQosShaperEntry 2 } f3FpQosShaperOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of a Shaper." ::= { f3FpQosShaperEntry 3 } f3FpQosShaperSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Shaper." ::= { f3FpQosShaperEntry 4 } f3FpQosShaperCIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Shaper." ::= { f3FpQosShaperEntry 5 } f3FpQosShaperCIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Shaper." ::= { f3FpQosShaperEntry 6 } f3FpQosShaperEIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper." ::= { f3FpQosShaperEntry 7 } f3FpQosShaperEIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper." ::= { f3FpQosShaperEntry 8 } f3FpQosShaperCBS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Burst Size (CBS) of a Shaper." ::= { f3FpQosShaperEntry 9 } f3FpQosShaperEBS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Burst Size (EBS) of a Shaper." ::= { f3FpQosShaperEntry 10 } f3FpQosShaperBufferSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Buffer Size of the Shaper." ::= { f3FpQosShaperEntry 11 } f3FpQosShaperCOS OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the COS (Class of Service) value for the QOS Shaper." ::= { f3FpQosShaperEntry 12 } f3FpQosShaperStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3FpQosShaperEntry 13 } f3FpQosShaperRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3FpQosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3FpQosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3FpQosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3FpQosShaperEntry 14 } f3FpQosShaperWfqWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the wfq weight of the QoS Shaper." ::= { f3FpQosShaperEntry 15 } -- -- Flow Point QoS Policer -- f3FpQosPolicerTable OBJECT-TYPE SYNTAX SEQUENCE OF F3FpQosPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Flow Point Quality of Service Policer for configuration purposes." ::= { cmFacilityObjects 96 } f3FpQosPolicerEntry OBJECT-TYPE SYNTAX F3FpQosPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3FpQosPolicerTable. These entries represent an Flow Point Quality of Service Policer." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, cmFlowPointIndex, f3FpQosPolicerIndex } ::= { f3FpQosPolicerTable 1 } F3FpQosPolicerEntry ::= SEQUENCE { f3FpQosPolicerIndex Integer32, f3FpQosPolicerAdminState AdminState, f3FpQosPolicerOperationalState OperationalState, f3FpQosPolicerSecondaryState SecondaryState, f3FpQosPolicerCIRLo Unsigned32, f3FpQosPolicerCIRHi Unsigned32, f3FpQosPolicerEIRLo Unsigned32, f3FpQosPolicerEIRHi Unsigned32, f3FpQosPolicerCBS Integer32, f3FpQosPolicerEBS Integer32, f3FpQosPolicerAlgorithm PolicerAlgorithmType, f3FpQosPolicerColorMode PolicerColorMode, f3FpQosPolicerCouplingFlag TruthValue, f3FpQosPolicerPolicingEnabled TruthValue, f3FpQosPolicerStorageType StorageType, f3FpQosPolicerRowStatus RowStatus, f3FpQosPolicerCIRMaxHi Unsigned32, f3FpQosPolicerCIRMaxLo Unsigned32, f3FpQosPolicerEIRMaxHi Unsigned32, f3FpQosPolicerEIRMaxLo Unsigned32, f3FpQosPolicerEnvelopeObject VariablePointer, f3FpQosPolicerRank Integer32 } f3FpQosPolicerIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique integer index value corresponding to a Quality of Service Policer. The Policer Index represents the COS level. This is applicable in case of a Multi COS Flow Point. Index 1 represents COS 0; Index 2 represents COS 1 and so on." ::= { f3FpQosPolicerEntry 1 } f3FpQosPolicerAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Administrative State of a Policer." ::= { f3FpQosPolicerEntry 2 } f3FpQosPolicerOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of a Policer." ::= { f3FpQosPolicerEntry 3 } f3FpQosPolicerSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of a Policer." ::= { f3FpQosPolicerEntry 4 } f3FpQosPolicerCIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Policer." ::= { f3FpQosPolicerEntry 5 } f3FpQosPolicerCIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Policer." ::= { f3FpQosPolicerEntry 6 } f3FpQosPolicerEIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer." ::= { f3FpQosPolicerEntry 7 } f3FpQosPolicerEIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer." ::= { f3FpQosPolicerEntry 8 } f3FpQosPolicerCBS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Burst Size (CBS) of a Policer." ::= { f3FpQosPolicerEntry 9 } f3FpQosPolicerEBS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Burst Size (EBS) of a Policer." ::= { f3FpQosPolicerEntry 10 } f3FpQosPolicerAlgorithm OBJECT-TYPE SYNTAX PolicerAlgorithmType MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking)." ::= { f3FpQosPolicerEntry 11 } f3FpQosPolicerColorMode OBJECT-TYPE SYNTAX PolicerColorMode MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'." ::= { f3FpQosPolicerEntry 12 } f3FpQosPolicerCouplingFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level." ::= { f3FpQosPolicerEntry 13 } f3FpQosPolicerPolicingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of Policer Policing. When Policing is disabled, traffic policing is bypassed. When Policing is enabled, traffic policing is applied." ::= { f3FpQosPolicerEntry 14 } f3FpQosPolicerStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3FpQosPolicerEntry 15 } f3FpQosPolicerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3FpQosPolicerRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3FpQosPolicerRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3FpQosPolicerRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3FpQosPolicerEntry 16 } f3FpQosPolicerCIRMaxHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the high 32 bits." ::= { f3FpQosPolicerEntry 17 } f3FpQosPolicerCIRMaxLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the lower 32 bits." ::= { f3FpQosPolicerEntry 18 } f3FpQosPolicerEIRMaxHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the high 32 bits." ::= { f3FpQosPolicerEntry 19 } f3FpQosPolicerEIRMaxLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the lower 32 bits." ::= { f3FpQosPolicerEntry 20 } f3FpQosPolicerEnvelopeObject OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of envelope object." ::= { f3FpQosPolicerEntry 21 } f3FpQosPolicerRank OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of rank value." ::= { f3FpQosPolicerEntry 22 } -- -- -- Ethernet Traffic Port Control Protocol Disposition V2 -- cmEthernetTrafficPortCpdV2Table OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetTrafficPortCpdV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Traffic Port Control Protocol Disposition (CPD) V2. This support of CPD is provided on the GE206/GE201 device." ::= { cmFacilityObjects 97 } cmEthernetTrafficPortCpdV2Entry OBJECT-TYPE SYNTAX CmEthernetTrafficPortCpdV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetTrafficPortCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Traffic Port." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, cmEthernetTrafficPortCpdV2Index } ::= { cmEthernetTrafficPortCpdV2Table 1 } CmEthernetTrafficPortCpdV2Entry ::= SEQUENCE { -- Index cmEthernetTrafficPortCpdV2Index Integer32, -- Filtering Criteria cmEthernetTrafficPortCpdV2CiscoGroupDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2IslDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2PagpDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2UdldDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2CdpDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2VtpDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2DtpDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2PvstpPlusDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2UplinkFastDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2VlanBridgeDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2L2PTDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2BridgeGroupDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2BPDUDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2PauseDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2LACPDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2LACPMarkerDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2EfmOamDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2SSMDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2PortAuthenDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2BridgeReservedDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2LANBridgesDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2GARPGroupDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2GMRPDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2GVRPDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2GARPDispType CmControlProtocolDispType, -- cmEthernetTrafficPortCpdV2LLDPDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2ELMIDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2L2PTTunnelMac MacAddress, -- cmEthernetTrafficPortCpdV2Mac00DispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2Mac01DispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2Mac02DispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2Mac03DispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2Mac04DispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2Mac05DispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2Mac06DispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2Mac07DispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2Mac08DispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2Mac09DispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2Mac0ADispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2Mac0BDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2Mac0CDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2Mac0DDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2Mac0EDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2Mac0FDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2NearestLLDPDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2NonTpmrLLDPDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2CustomerLLDPDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2PtpUntaggedDispType CmControlProtocolDispType, cmEthernetTrafficPortCpdV2PtpTaggedDispType CmControlProtocolDispType } cmEthernetTrafficPortCpdV2Index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unique Index value to access the CPD row." ::= { cmEthernetTrafficPortCpdV2Entry 1 } cmEthernetTrafficPortCpdV2CiscoGroupDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, UplinkFast, VLAN Bridge, L2PT. Note that a specific protocol filter overrides the group setting." ::= { cmEthernetTrafficPortCpdV2Entry 2 } cmEthernetTrafficPortCpdV2IslDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00)." ::= { cmEthernetTrafficPortCpdV2Entry 3 } cmEthernetTrafficPortCpdV2PagpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104)." ::= { cmEthernetTrafficPortCpdV2Entry 4 } cmEthernetTrafficPortCpdV2UdldDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111)." ::= { cmEthernetTrafficPortCpdV2Entry 5 } cmEthernetTrafficPortCpdV2CdpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000)." ::= { cmEthernetTrafficPortCpdV2Entry 6 } cmEthernetTrafficPortCpdV2VtpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003)." ::= { cmEthernetTrafficPortCpdV2Entry 7 } cmEthernetTrafficPortCpdV2DtpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004)." ::= { cmEthernetTrafficPortCpdV2Entry 8 } cmEthernetTrafficPortCpdV2PvstpPlusDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B)." ::= { cmEthernetTrafficPortCpdV2Entry 9 } cmEthernetTrafficPortCpdV2UplinkFastDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A)." ::= { cmEthernetTrafficPortCpdV2Entry 10 } cmEthernetTrafficPortCpdV2VlanBridgeDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C)." ::= { cmEthernetTrafficPortCpdV2Entry 11 } cmEthernetTrafficPortCpdV2L2PTDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0)." ::= { cmEthernetTrafficPortCpdV2Entry 12 } cmEthernetTrafficPortCpdV2BridgeGroupDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Control), LACP (Link Aggregation), LACP Marker (Marker), EFM OAM (IEEE 802.3 ah) and IEEE 802.1x Port Authentication, besides reserved MAC addresses from 01:80:C2:00:00:04 thru 01:80:C2:00:00:0F." ::= { cmEthernetTrafficPortCpdV2Entry 13 } cmEthernetTrafficPortCpdV2BPDUDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00)." ::= { cmEthernetTrafficPortCpdV2Entry 14 } cmEthernetTrafficPortCpdV2PauseDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames)." ::= { cmEthernetTrafficPortCpdV2Entry 15 } cmEthernetTrafficPortCpdV2LACPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01)." ::= { cmEthernetTrafficPortCpdV2Entry 16 } cmEthernetTrafficPortCpdV2LACPMarkerDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02)." ::= { cmEthernetTrafficPortCpdV2Entry 17 } cmEthernetTrafficPortCpdV2EfmOamDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03)." ::= { cmEthernetTrafficPortCpdV2Entry 18 } cmEthernetTrafficPortCpdV2SSMDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A)." ::= { cmEthernetTrafficPortCpdV2Entry 19 } cmEthernetTrafficPortCpdV2PortAuthenDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E)." ::= { cmEthernetTrafficPortCpdV2Entry 20 } cmEthernetTrafficPortCpdV2BridgeReservedDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0F." ::= { cmEthernetTrafficPortCpdV2Entry 21 } cmEthernetTrafficPortCpdV2LANBridgesDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10)." ::= { cmEthernetTrafficPortCpdV2Entry 22 } cmEthernetTrafficPortCpdV2GARPGroupDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F." ::= { cmEthernetTrafficPortCpdV2Entry 23 } cmEthernetTrafficPortCpdV2GMRPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20)." ::= { cmEthernetTrafficPortCpdV2Entry 24 } cmEthernetTrafficPortCpdV2GVRPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21)." ::= { cmEthernetTrafficPortCpdV2Entry 25 } cmEthernetTrafficPortCpdV2GARPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F." ::= { cmEthernetTrafficPortCpdV2Entry 26 } cmEthernetTrafficPortCpdV2LLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Deprecated - each LLDP MAC protocol has its own disposition. LLDP (Link Layer Discovery Protocol) Disposition type. MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:00:03, or 01:80:C2:00:00:00." ::= { cmEthernetTrafficPortCpdV2Entry 27 } cmEthernetTrafficPortCpdV2ELMIDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE." ::= { cmEthernetTrafficPortCpdV2Entry 28 } cmEthernetTrafficPortCpdV2L2PTTunnelMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Configurable Layer 2 Protocol Tunneling MAC Address. For protocols STP, CDP and VTP, with control protocol disposition as pass-thru-l2pt, this configured MAC address replaces the DA, upon encapsulation. For decapsulation, protocol signature and this configured MAC address are matched and the MAC address is replaced with the protocol's inferred MAC address." ::= { cmEthernetTrafficPortCpdV2Entry 29 } cmEthernetTrafficPortCpdV2Mac00DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:00 Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 30 } cmEthernetTrafficPortCpdV2Mac01DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:01 Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 31 } cmEthernetTrafficPortCpdV2Mac02DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:02 Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 32 } cmEthernetTrafficPortCpdV2Mac03DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:03 Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 33 } cmEthernetTrafficPortCpdV2Mac04DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:04 Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 34 } cmEthernetTrafficPortCpdV2Mac05DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:05 Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 35 } cmEthernetTrafficPortCpdV2Mac06DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:06 Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 36 } cmEthernetTrafficPortCpdV2Mac07DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:07 Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 37 } cmEthernetTrafficPortCpdV2Mac08DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:08 Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 38 } cmEthernetTrafficPortCpdV2Mac09DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:09 Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 39 } cmEthernetTrafficPortCpdV2Mac0ADispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0A Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 40 } cmEthernetTrafficPortCpdV2Mac0BDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0B Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 41 } cmEthernetTrafficPortCpdV2Mac0CDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0C Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 42 } cmEthernetTrafficPortCpdV2Mac0DDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0D Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 43 } cmEthernetTrafficPortCpdV2Mac0EDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0E Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 44 } cmEthernetTrafficPortCpdV2Mac0FDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0F Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 45 } cmEthernetTrafficPortCpdV2NearestLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 46 } cmEthernetTrafficPortCpdV2NonTpmrLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 47 } cmEthernetTrafficPortCpdV2CustomerLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 48 } cmEthernetTrafficPortCpdV2PtpUntaggedDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "PTP untagged frame Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 49 } cmEthernetTrafficPortCpdV2PtpTaggedDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "PTP tagged frame Disposition type." ::= { cmEthernetTrafficPortCpdV2Entry 50 } -- -- Flow Point Control Protocol Disposition -- f3FlowPointCpdV2Table OBJECT-TYPE SYNTAX SEQUENCE OF F3FlowPointCpdV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Flow Point Control Protocol Disposition V2." ::= { cmFacilityObjects 98 } f3FlowPointCpdV2Entry OBJECT-TYPE SYNTAX F3FlowPointCpdV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3FlowPointCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Flow Point." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, cmFlowPointIndex, f3FlowPointCpdV2Index } ::= { f3FlowPointCpdV2Table 1 } F3FlowPointCpdV2Entry ::= SEQUENCE { f3FlowPointCpdV2Index Integer32, f3FlowPointCpdV2IslDispType CmControlProtocolDispType, f3FlowPointCpdV2PagpDispType CmControlProtocolDispType, f3FlowPointCpdV2UdldDispType CmControlProtocolDispType, f3FlowPointCpdV2CdpDispType CmControlProtocolDispType, f3FlowPointCpdV2VtpDispType CmControlProtocolDispType, f3FlowPointCpdV2DtpDispType CmControlProtocolDispType, f3FlowPointCpdV2PvstpPlusDispType CmControlProtocolDispType, f3FlowPointCpdV2UplinkFastDispType CmControlProtocolDispType, f3FlowPointCpdV2VlanBridgeDispType CmControlProtocolDispType, f3FlowPointCpdV2L2PTDispType CmControlProtocolDispType, f3FlowPointCpdV2BPDUDispType CmControlProtocolDispType, f3FlowPointCpdV2PauseDispType CmControlProtocolDispType, f3FlowPointCpdV2LACPDispType CmControlProtocolDispType, f3FlowPointCpdV2LACPMarkerDispType CmControlProtocolDispType, f3FlowPointCpdV2EfmOamDispType CmControlProtocolDispType, f3FlowPointCpdV2SSMDispType CmControlProtocolDispType, f3FlowPointCpdV2PortAuthenDispType CmControlProtocolDispType, f3FlowPointCpdV2LANBridgesDispType CmControlProtocolDispType, f3FlowPointCpdV2GMRPDispType CmControlProtocolDispType, f3FlowPointCpdV2GVRPDispType CmControlProtocolDispType, f3FlowPointCpdV2GARPDispType CmControlProtocolDispType, f3FlowPointCpdV2ActiveControlProtocols CmActiveControlProtocolsType, f3FlowPointCpdV2ELMIDispType CmControlProtocolDispType, f3FlowPointCpdV2Mac00DispType CmControlProtocolDispType, f3FlowPointCpdV2Mac01DispType CmControlProtocolDispType, f3FlowPointCpdV2Mac02DispType CmControlProtocolDispType, f3FlowPointCpdV2Mac03DispType CmControlProtocolDispType, f3FlowPointCpdV2Mac04DispType CmControlProtocolDispType, f3FlowPointCpdV2Mac05DispType CmControlProtocolDispType, f3FlowPointCpdV2Mac06DispType CmControlProtocolDispType, f3FlowPointCpdV2Mac07DispType CmControlProtocolDispType, f3FlowPointCpdV2Mac08DispType CmControlProtocolDispType, f3FlowPointCpdV2Mac09DispType CmControlProtocolDispType, f3FlowPointCpdV2Mac0ADispType CmControlProtocolDispType, f3FlowPointCpdV2Mac0BDispType CmControlProtocolDispType, f3FlowPointCpdV2Mac0CDispType CmControlProtocolDispType, f3FlowPointCpdV2Mac0DDispType CmControlProtocolDispType, f3FlowPointCpdV2Mac0EDispType CmControlProtocolDispType, f3FlowPointCpdV2Mac0FDispType CmControlProtocolDispType, f3FlowPointCpdV2NearestLLDPDispType CmControlProtocolDispType, f3FlowPointCpdV2NonTpmrLLDPDispType CmControlProtocolDispType, f3FlowPointCpdV2CustomerLLDPDispType CmControlProtocolDispType } f3FlowPointCpdV2Index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique Index value to access the CPD row." ::= { f3FlowPointCpdV2Entry 1 } f3FlowPointCpdV2IslDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00)." ::= { f3FlowPointCpdV2Entry 2 } f3FlowPointCpdV2PagpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104)." ::= { f3FlowPointCpdV2Entry 3 } f3FlowPointCpdV2UdldDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111)." ::= { f3FlowPointCpdV2Entry 4 } f3FlowPointCpdV2CdpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000)." ::= { f3FlowPointCpdV2Entry 5 } f3FlowPointCpdV2VtpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003)." ::= { f3FlowPointCpdV2Entry 6 } f3FlowPointCpdV2DtpDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004)." ::= { f3FlowPointCpdV2Entry 7 } f3FlowPointCpdV2PvstpPlusDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B)." ::= { f3FlowPointCpdV2Entry 8 } f3FlowPointCpdV2UplinkFastDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A)." ::= { f3FlowPointCpdV2Entry 9 } f3FlowPointCpdV2VlanBridgeDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C)." ::= { f3FlowPointCpdV2Entry 10 } f3FlowPointCpdV2L2PTDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0)." ::= { f3FlowPointCpdV2Entry 11 } f3FlowPointCpdV2BPDUDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00)." ::= { f3FlowPointCpdV2Entry 12 } f3FlowPointCpdV2PauseDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames)." ::= { f3FlowPointCpdV2Entry 13 } f3FlowPointCpdV2LACPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01)." ::= { f3FlowPointCpdV2Entry 14 } f3FlowPointCpdV2LACPMarkerDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02)." ::= { f3FlowPointCpdV2Entry 15 } f3FlowPointCpdV2EfmOamDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03)." ::= { f3FlowPointCpdV2Entry 16 } f3FlowPointCpdV2SSMDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A)." ::= { f3FlowPointCpdV2Entry 17 } f3FlowPointCpdV2PortAuthenDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E)." ::= { f3FlowPointCpdV2Entry 18 } f3FlowPointCpdV2LANBridgesDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10)." ::= { f3FlowPointCpdV2Entry 19 } f3FlowPointCpdV2GMRPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20)." ::= { f3FlowPointCpdV2Entry 20 } f3FlowPointCpdV2GVRPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21)." ::= { f3FlowPointCpdV2Entry 21 } f3FlowPointCpdV2GARPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F." ::= { f3FlowPointCpdV2Entry 22 } f3FlowPointCpdV2ActiveControlProtocols OBJECT-TYPE SYNTAX CmActiveControlProtocolsType MAX-ACCESS read-only STATUS current DESCRIPTION "List of Active Control Protocol Dispositions. Note that if the Port Level Disposition control is set to PEER or DISCARD, the flow level disposition is no longer active. This object provides information on all the active dispositions." ::= { f3FlowPointCpdV2Entry 23 } f3FlowPointCpdV2ELMIDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE." ::= { f3FlowPointCpdV2Entry 24 } f3FlowPointCpdV2Mac00DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:00 Disposition type." ::= { f3FlowPointCpdV2Entry 25 } f3FlowPointCpdV2Mac01DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:01 Disposition type." ::= { f3FlowPointCpdV2Entry 26 } f3FlowPointCpdV2Mac02DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:02 Disposition type." ::= { f3FlowPointCpdV2Entry 27 } f3FlowPointCpdV2Mac03DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:03 Disposition type." ::= { f3FlowPointCpdV2Entry 28 } f3FlowPointCpdV2Mac04DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:04 Disposition type." ::= { f3FlowPointCpdV2Entry 29 } f3FlowPointCpdV2Mac05DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:05 Disposition type." ::= { f3FlowPointCpdV2Entry 30 } f3FlowPointCpdV2Mac06DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:06 Disposition type." ::= { f3FlowPointCpdV2Entry 31 } f3FlowPointCpdV2Mac07DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:07 Disposition type." ::= { f3FlowPointCpdV2Entry 32 } f3FlowPointCpdV2Mac08DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:08 Disposition type." ::= { f3FlowPointCpdV2Entry 33 } f3FlowPointCpdV2Mac09DispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:09 Disposition type." ::= { f3FlowPointCpdV2Entry 34 } f3FlowPointCpdV2Mac0ADispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0A Disposition type." ::= { f3FlowPointCpdV2Entry 35 } f3FlowPointCpdV2Mac0BDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0B Disposition type." ::= { f3FlowPointCpdV2Entry 36 } f3FlowPointCpdV2Mac0CDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0C Disposition type." ::= { f3FlowPointCpdV2Entry 37 } f3FlowPointCpdV2Mac0DDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0D Disposition type." ::= { f3FlowPointCpdV2Entry 38 } f3FlowPointCpdV2Mac0EDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0E Disposition type." ::= { f3FlowPointCpdV2Entry 39 } f3FlowPointCpdV2Mac0FDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address 01:80:C2:00:00:0F Disposition type." ::= { f3FlowPointCpdV2Entry 40 } f3FlowPointCpdV2NearestLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type." ::= { f3FlowPointCpdV2Entry 41 } f3FlowPointCpdV2NonTpmrLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type." ::= { f3FlowPointCpdV2Entry 42 } f3FlowPointCpdV2CustomerLLDPDispType OBJECT-TYPE SYNTAX CmControlProtocolDispType MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type." ::= { f3FlowPointCpdV2Entry 43 } -- -- L2 ACL Rule Table -- f3AclRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF F3AclRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the L2 ACL rule." ::= { cmFacilityObjects 99 } f3AclRuleEntry OBJECT-TYPE SYNTAX F3AclRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3AclRuleTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, cmFlowPointIndex, f3AclRuleIndex } ::= { f3AclRuleTable 1 } F3AclRuleEntry ::= SEQUENCE { f3AclRuleIndex Integer32, f3AclRuleAdminState AdminState, f3AclRuleAlias F3DisplayString, f3AclRulePriority Integer32, f3AclRuleOperation AclRuleOperation, f3AclRuleCosOverrideControl TruthValue, f3AclRuleCOS Integer32, -- L2 attributes f3AclRuleSrcMacAddressControl TruthValue, f3AclRuleSrcMacAddress MacAddress, f3AclRuleSrcMacAddressMask MacAddress, f3AclRuleDstMacAddressControl TruthValue, f3AclRuleDstMacAddress MacAddress, f3AclRuleDstMacAddressMask MacAddress, f3AclRuleOuterVlanVIDControl TruthValue, f3AclRuleOuterVlanVIDLowLimit VlanId, f3AclRuleOuterVlanVIDHighLimit VlanId, f3AclRuleInnerVlanVIDControl TruthValue, f3AclRuleInnerVlanVIDLowLimit VlanId, f3AclRuleInnerVlanVIDHighLimit VlanId, f3AclRuleOuterVlanPcpControl TruthValue, f3AclRuleOuterVlanPcpLowLimit VlanPriority, f3AclRuleOuterVlanPcpHighLimit VlanPriority, f3AclRuleInnerVlanPcpControl TruthValue, f3AclRuleInnerVlanPcpLowLimit VlanPriority, f3AclRuleInnerVlanPcpHighLimit VlanPriority, f3AclRuleOuterVlanDeiControl TruthValue, f3AclRuleOuterVlanDei Unsigned32, f3AclRuleEtherTypeControl TruthValue, f3AclRuleEtherType Integer32, -- L3 attributes f3AclRuleIpv4PriorityControl TruthValue, f3AclRuleIpv4PriorityLowLimit Integer32, f3AclRuleIpv4PriorityHighLimit Integer32, f3AclRuleProtocolControl TruthValue, f3AclRuleProtocolNumber Integer32, f3AclRuleSrcIpv4AddressControl TruthValue, f3AclRuleSrcIpv4AddressLowLimit IpAddress, f3AclRuleSrcIpv4AddressHighLimit IpAddress, f3AclRuleDstIpv4AddressControl TruthValue, f3AclRuleDstIpv4AddressLowLimit IpAddress, f3AclRuleDstIpv4AddressHighLimit IpAddress, -- L4 attributes f3AclRuleSrcPortControl TruthValue, f3AclRuleSrcPortLowLimit Integer32, f3AclRuleSrcPortHighLimit Integer32, f3AclRuleDstPortControl TruthValue, f3AclRuleDstPortLowLimit Integer32, f3AclRuleDstPortHighLimit Integer32, f3AclRuleTcpFlagsControl TruthValue, f3AclRuleTcpFlags Integer32, f3AclRuleStorageType StorageType, f3AclRuleRowStatus RowStatus, f3AclRuleActive TruthValue, f3AclRuleSrcIpv6AddressControl TruthValue, f3AclRuleSrcIpv6Address Ipv6Address, f3AclRuleSrcIpv6AddressPrefixLen Integer32, f3AclRuleDstIpv6AddressControl TruthValue, f3AclRuleDstIpv6Address Ipv6Address, f3AclRuleDstIpv6AddressPrefixLen Integer32, f3AclRuleIpV6FlowLabelControl TruthValue, f3AclRuleIpV6FlowLabel Integer32, f3AclRulePriorityControl TruthValue, f3AclRulePriorityLowLimit Integer32, f3AclRulePriorityHighLimit Integer32 } f3AclRuleIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ACL rule number." ::= { f3AclRuleEntry 1 } f3AclRuleAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user configure the Acl Rule in-service or management state." ::= { f3AclRuleEntry 2 } f3AclRuleAlias OBJECT-TYPE SYNTAX F3DisplayString (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule alias." ::= { f3AclRuleEntry 3 } f3AclRulePriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule priority." ::= { f3AclRuleEntry 4 } f3AclRuleOperation OBJECT-TYPE SYNTAX AclRuleOperation MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule action." ::= { f3AclRuleEntry 5 } f3AclRuleCosOverrideControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule COS Override control." ::= { f3AclRuleEntry 6 } f3AclRuleCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule class of service." ::= { f3AclRuleEntry 7 } f3AclRuleSrcMacAddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule Source MAC address control." ::= { f3AclRuleEntry 8 } f3AclRuleSrcMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Source MAC address." ::= { f3AclRuleEntry 9 } f3AclRuleSrcMacAddressMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Source MAC address mask." ::= { f3AclRuleEntry 10 } f3AclRuleDstMacAddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Destination MAC address control." ::= { f3AclRuleEntry 11 } f3AclRuleDstMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Destination MAC address." ::= { f3AclRuleEntry 12 } f3AclRuleDstMacAddressMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Destination MAC address mask." ::= { f3AclRuleEntry 13 } f3AclRuleOuterVlanVIDControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer VID control." ::= { f3AclRuleEntry 14 } f3AclRuleOuterVlanVIDLowLimit OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer Vlan ID low limit." ::= { f3AclRuleEntry 15 } f3AclRuleOuterVlanVIDHighLimit OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer Vlan ID high limit." ::= { f3AclRuleEntry 16 } f3AclRuleInnerVlanVIDControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner VID control." ::= { f3AclRuleEntry 17 } f3AclRuleInnerVlanVIDLowLimit OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner Vlan ID low limit." ::= { f3AclRuleEntry 18 } f3AclRuleInnerVlanVIDHighLimit OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule Inner Vlan ID high limit." ::= { f3AclRuleEntry 19 } f3AclRuleOuterVlanPcpControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan PCP control." ::= { f3AclRuleEntry 20 } f3AclRuleOuterVlanPcpLowLimit OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan PCP priority low limit." ::= { f3AclRuleEntry 21 } f3AclRuleOuterVlanPcpHighLimit OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan PCP priority high limit." ::= { f3AclRuleEntry 22 } f3AclRuleInnerVlanPcpControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner vlan PCP control." ::= { f3AclRuleEntry 23 } f3AclRuleInnerVlanPcpLowLimit OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner vlan PCP priority low limit." ::= { f3AclRuleEntry 24 } f3AclRuleInnerVlanPcpHighLimit OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner vlan PCP priority high limit." ::= { f3AclRuleEntry 25 } f3AclRuleOuterVlanDeiControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan DEI control." ::= { f3AclRuleEntry 26 } f3AclRuleOuterVlanDei OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan DEI." ::= { f3AclRuleEntry 27 } f3AclRuleEtherTypeControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan ether type control." ::= { f3AclRuleEntry 28 } f3AclRuleEtherType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan ether type." ::= { f3AclRuleEntry 29 } f3AclRuleIpv4PriorityControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The ACL rule IPv4 Priority control whether enabled." ::= { f3AclRuleEntry 30 } f3AclRuleIpv4PriorityLowLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The ACL rule IPv4 priority low limit." ::= { f3AclRuleEntry 31 } f3AclRuleIpv4PriorityHighLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The ACL rule ipv4 priority high limit." ::= { f3AclRuleEntry 32 } f3AclRuleProtocolControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule protocol control whether enabled." ::= { f3AclRuleEntry 33 } f3AclRuleProtocolNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule protocol number." ::= { f3AclRuleEntry 34 } f3AclRuleSrcIpv4AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source IPv4 Adress control whether enabled." ::= { f3AclRuleEntry 35 } f3AclRuleSrcIpv4AddressLowLimit OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source IPv4 Adress low limit." ::= { f3AclRuleEntry 36 } f3AclRuleSrcIpv4AddressHighLimit OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source ipv4 adress high limit." ::= { f3AclRuleEntry 37 } f3AclRuleDstIpv4AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule Destination IPv4 Adress control whether enabled." ::= { f3AclRuleEntry 38 } f3AclRuleDstIpv4AddressLowLimit OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule Destination IPv4 Adress low limit." ::= { f3AclRuleEntry 39 } f3AclRuleDstIpv4AddressHighLimit OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination ipv4 adress high limit." ::= { f3AclRuleEntry 40 } f3AclRuleSrcPortControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source port whether enabled." ::= { f3AclRuleEntry 41 } f3AclRuleSrcPortLowLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source port low limit." ::= { f3AclRuleEntry 42 } f3AclRuleSrcPortHighLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source port low limit." ::= { f3AclRuleEntry 43 } f3AclRuleDstPortControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination port whether enabled." ::= { f3AclRuleEntry 44 } f3AclRuleDstPortLowLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination port low limit." ::= { f3AclRuleEntry 45 } f3AclRuleDstPortHighLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination port low limit." ::= { f3AclRuleEntry 46 } f3AclRuleTcpFlagsControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan TCP flags control." ::= { f3AclRuleEntry 47 } f3AclRuleTcpFlags OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan TCP flags." ::= { f3AclRuleEntry 48 } f3AclRuleStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3AclRuleEntry 49 } f3AclRuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3AclRuleRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3AclRuleRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3AclRuleRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3AclRuleEntry 50 } f3AclRuleActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL Rule Active activates/deactivates ACL Rule." ::= { f3AclRuleEntry 51 } f3AclRuleSrcIpv6AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source ipv6 adress is control enabled." ::= { f3AclRuleEntry 52 } f3AclRuleSrcIpv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source ipv6 adress high limit." ::= { f3AclRuleEntry 53 } f3AclRuleSrcIpv6AddressPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source ipv6 prefix length." ::= { f3AclRuleEntry 54 } f3AclRuleDstIpv6AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination ipv6 Adress is control enabled." ::= { f3AclRuleEntry 55 } f3AclRuleDstIpv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination ipv6 adress." ::= { f3AclRuleEntry 56 } f3AclRuleDstIpv6AddressPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination ipv6 prefix length." ::= { f3AclRuleEntry 57 } f3AclRuleIpV6FlowLabelControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule ipv6 Flow Label Control enables/disables Flow Label." ::= { f3AclRuleEntry 58 } f3AclRuleIpV6FlowLabel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule ipv6 Flow Label." ::= { f3AclRuleEntry 59 } f3AclRulePriorityControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The ACL rule Priority control whether enabled." ::= { f3AclRuleEntry 60 } f3AclRulePriorityLowLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The ACL rule priority low limit." ::= { f3AclRuleEntry 61 } f3AclRulePriorityHighLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The ACL rule priority high limit." ::= { f3AclRuleEntry 62 } -- -- Ethernet Traffic Port Exp Encoding Table -- f3EthernetTrafficPortExpDEEncTable OBJECT-TYPE SYNTAX SEQUENCE OF F3EthernetTrafficPortExpDEEncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Traffic Port Exp drop eligibility encoding table. This is applied to a frame that is egressing at the Traffic Port." ::= { cmFacilityObjects 100 } f3EthernetTrafficPortExpDEEncEntry OBJECT-TYPE SYNTAX F3EthernetTrafficPortExpDEEncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3EthernetTrafficPortExpDEEncTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, f3EthernetTrafficPortExpDEEncIndex } ::= { f3EthernetTrafficPortExpDEEncTable 1 } F3EthernetTrafficPortExpDEEncEntry ::= SEQUENCE { f3EthernetTrafficPortExpDEEncIndex Integer32, f3EthernetTrafficPortExpDEEncInPriority VlanPriority, f3EthernetTrafficPortExpDEEncDropIneligiblePrio VlanPriority, f3EthernetTrafficPortExpDEEncDropEligiblePrio VlanPriority } f3EthernetTrafficPortExpDEEncIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the Exp drop eligible encoding table." ::= { f3EthernetTrafficPortExpDEEncEntry 1 } f3EthernetTrafficPortExpDEEncInPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority." ::= { f3EthernetTrafficPortExpDEEncEntry 2 } f3EthernetTrafficPortExpDEEncDropIneligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the Exp value that has a priority value with implicit drop ineligibility encoded into it." ::= { f3EthernetTrafficPortExpDEEncEntry 3 } f3EthernetTrafficPortExpDEEncDropEligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the Exp value that has a priority value with implicit drop eligibility encoded into it." ::= { f3EthernetTrafficPortExpDEEncEntry 4 } -- -- Ethernet Traffic Port Exp Decoding Table -- f3EthernetTrafficPortExpDEDecTable OBJECT-TYPE SYNTAX SEQUENCE OF F3EthernetTrafficPortExpDEDecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Traffic Port Exp drop eligibility decoding table. This is applied to a frame that is ingressing at a port." ::= { cmFacilityObjects 101 } f3EthernetTrafficPortExpDEDecEntry OBJECT-TYPE SYNTAX F3EthernetTrafficPortExpDEDecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3EthernetTrafficPortExpDEDecTable." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, f3EthernetTrafficPortExpDEDecIndex } ::= { f3EthernetTrafficPortExpDEDecTable 1 } F3EthernetTrafficPortExpDEDecEntry ::= SEQUENCE { f3EthernetTrafficPortExpDEDecIndex Integer32, f3EthernetTrafficPortExpDEDecInPriority VlanPriority, f3EthernetTrafficPortExpDEDecOutPriority VlanPriority, f3EthernetTrafficPortExpDEDecDropEligible TruthValue } f3EthernetTrafficPortExpDEDecIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the Exp drop eligible decoding table." ::= { f3EthernetTrafficPortExpDEDecEntry 1 } f3EthernetTrafficPortExpDEDecInPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the input priority that is decoded to get priority and the drop eligibility of a frame." ::= { f3EthernetTrafficPortExpDEDecEntry 2 } f3EthernetTrafficPortExpDEDecOutPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the priority value decoded from a incoming Exp value." ::= { f3EthernetTrafficPortExpDEDecEntry 3 } f3EthernetTrafficPortExpDEDecDropEligible OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop eligibility decoded from a incoming Exp value." ::= { f3EthernetTrafficPortExpDEDecEntry 4 } -- -- Ethernet Traffic Port Exp Pair Table -- f3EthernetTrafficPortExpDEPairTable OBJECT-TYPE SYNTAX SEQUENCE OF F3EthernetTrafficPortExpDEPairEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet Traffic Port Exp drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending on the Exp DE Enc/Dec mode there can be upto 3 pairs in the table. There will one pair for 7P1D, two pairs for 6P2D and three pairs for 5P3D." ::= { cmFacilityObjects 102 } f3EthernetTrafficPortExpDEPairEntry OBJECT-TYPE SYNTAX F3EthernetTrafficPortExpDEPairEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3EthernetTrafficPortExpDEPairEntry." INDEX { neIndex, shelfIndex, slotIndex, cmEthernetTrafficPortIndex, f3EthernetTrafficPortExpDEPairIndex } ::= { f3EthernetTrafficPortExpDEPairTable 1 } F3EthernetTrafficPortExpDEPairEntry ::= SEQUENCE { f3EthernetTrafficPortExpDEPairIndex Integer32, f3EthernetTrafficPortExpDEDropIneligiblePrio VlanPriority, f3EthernetTrafficPortExpDEDropEligiblePrio VlanPriority } f3EthernetTrafficPortExpDEPairIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify a row in the Exp drop eligible priority pair table." ::= { f3EthernetTrafficPortExpDEPairEntry 1 } f3EthernetTrafficPortExpDEDropIneligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop ineligible priority." ::= { f3EthernetTrafficPortExpDEPairEntry 2 } f3EthernetTrafficPortExpDEDropEligiblePrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the drop eligible priority." ::= { f3EthernetTrafficPortExpDEPairEntry 3 } -- -- Ethernet Network Port PPPoE Parameter -- cmEthernetNetPortPppoeParamTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetNetPortPppoeParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Network Port PPPoE Parameters for configuration purposes." ::= { cmFacilityObjects 103 } cmEthernetNetPortPppoeParamEntry OBJECT-TYPE SYNTAX CmEthernetNetPortPppoeParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetNetPortPppoeParamTable." AUGMENTS { cmEthernetNetPortEntry } ::= { cmEthernetNetPortPppoeParamTable 1 } CmEthernetNetPortPppoeParamEntry ::= SEQUENCE { cmEthernetNetPortPppoeOuterVlanControl TruthValue, cmEthernetNetPortPppoeOuterVlanEtherType Unsigned32, cmEthernetNetPortPppoeOuterVlanId VlanId, cmEthernetNetPortPppoeOuterVlanPriority VlanPriority, cmEthernetNetPortPppoeInnerVlanControl TruthValue, cmEthernetNetPortPppoeInnerVlanEtherType Unsigned32, cmEthernetNetPortPppoeInnerVlanId VlanId, cmEthernetNetPortPppoeInnerVlanPriority VlanPriority, cmEthernetNetPortPppoeServiceName DisplayString, cmEthernetNetPortPppoeLcpKeepAlivePeriod Unsigned32, cmEthernetNetPortPppoeLcpRetryThreshold Unsigned32, cmEthernetNetPortPppoeRxAcName DisplayString, cmEthernetNetPortPppoeRxServiceName DisplayString, cmEthernetNetPortPppoeSessionId Unsigned32, cmEthernetNetPortPppoeConnStatus PPPoEConnectionStatus } cmEthernetNetPortPppoeOuterVlanControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specify outer vlan whether enabled." ::= { cmEthernetNetPortPppoeParamEntry 1 } cmEthernetNetPortPppoeOuterVlanEtherType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specify outer vlan ether type value." ::= { cmEthernetNetPortPppoeParamEntry 2 } cmEthernetNetPortPppoeOuterVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object specify vlan id of outer tag." ::= { cmEthernetNetPortPppoeParamEntry 3 } cmEthernetNetPortPppoeOuterVlanPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object specify vlan priority of outer tag." ::= { cmEthernetNetPortPppoeParamEntry 4 } cmEthernetNetPortPppoeInnerVlanControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specify inner vlan whether enabled." ::= { cmEthernetNetPortPppoeParamEntry 5 } cmEthernetNetPortPppoeInnerVlanEtherType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specify inner vlan ether type value." ::= { cmEthernetNetPortPppoeParamEntry 6 } cmEthernetNetPortPppoeInnerVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object specify vlan id of inner tag." ::= { cmEthernetNetPortPppoeParamEntry 7 } cmEthernetNetPortPppoeInnerVlanPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This object specify vlan priority of inner tag." ::= { cmEthernetNetPortPppoeParamEntry 8 } cmEthernetNetPortPppoeServiceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The service name requested." ::= { cmEthernetNetPortPppoeParamEntry 9 } cmEthernetNetPortPppoeLcpKeepAlivePeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The service name requested." ::= { cmEthernetNetPortPppoeParamEntry 10 } cmEthernetNetPortPppoeLcpRetryThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specify the lcp retry threshold." ::= { cmEthernetNetPortPppoeParamEntry 11 } cmEthernetNetPortPppoeRxAcName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The ac name received." ::= { cmEthernetNetPortPppoeParamEntry 12 } cmEthernetNetPortPppoeRxServiceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The service names received." ::= { cmEthernetNetPortPppoeParamEntry 13 } cmEthernetNetPortPppoeSessionId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "pppoe session id." ::= { cmEthernetNetPortPppoeParamEntry 14 } cmEthernetNetPortPppoeConnStatus OBJECT-TYPE SYNTAX PPPoEConnectionStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the connection status of pppoe connection." ::= { cmEthernetNetPortPppoeParamEntry 15 } -- -- Ethernet Network Port XDSL Parameter -- cmEthernetNetPortXdslParamTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEthernetNetPortXdslParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Network Port XDSL Parameters for configuration purposes." ::= { cmFacilityObjects 104 } cmEthernetNetPortXdslParamEntry OBJECT-TYPE SYNTAX CmEthernetNetPortXdslParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEthernetNetPortXdslParamTable." AUGMENTS { cmEthernetNetPortEntry } ::= { cmEthernetNetPortXdslParamTable 1 } CmEthernetNetPortXdslParamEntry ::= SEQUENCE { cmEthernetNetPortXdslConnControl TruthValue, cmEthernetNetPortXdslModulationMode XDSLModulationMode, cmEthernetNetPortXdslBitSwapEnabled TruthValue, cmEthernetNetPortXdslGvectorEnabled TruthValue, cmEthernetNetPortXdslVdslProfile VDSLProfileFields, cmEthernetNetPortXdslStatus XDSLStatus, cmEthernetNetPortXdslCurVdslProfile VDSLProfileField, cmEthernetNetPortXdslActualLinkRateUpStream Unsigned32, cmEthernetNetPortXdslActualLinkRateDownStream Unsigned32, cmEthernetNetPortXdslControlChannel XDSLControlChannel, cmEthernetNetPortXdslCarrierSet XDSLCarrierSet, cmEthernetNetPortXdslMode XDSLMode, cmEthernetNetPortXdslAnnex XDSLAnnex, cmEthernetNetPortXdslDsSNRMargin Integer32, cmEthernetNetPortXdslUsSNRMargin Integer32, cmEthernetNetPortXdslDsSignalAttenuation Integer32, cmEthernetNetPortXdslDsLineAttenuation Integer32, cmEthernetNetPortXdslDsTxPower Integer32, cmEthernetNetPortXdslUsTxPower Integer32, cmEthernetNetPortXdslDsAttainableRate Unsigned32, cmEthernetNetPortXdslUsAttainableRate Unsigned32 } cmEthernetNetPortXdslConnControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enable/disable xdsl link." ::= { cmEthernetNetPortXdslParamEntry 1 } cmEthernetNetPortXdslModulationMode OBJECT-TYPE SYNTAX XDSLModulationMode MAX-ACCESS read-write STATUS current DESCRIPTION "Xdsl modulation." ::= { cmEthernetNetPortXdslParamEntry 2 } cmEthernetNetPortXdslBitSwapEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable bitswap." ::= { cmEthernetNetPortXdslParamEntry 3 } cmEthernetNetPortXdslGvectorEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable G.vector." ::= { cmEthernetNetPortXdslParamEntry 4 } cmEthernetNetPortXdslVdslProfile OBJECT-TYPE SYNTAX VDSLProfileFields MAX-ACCESS read-write STATUS current DESCRIPTION "Selected vdsl profile." ::= { cmEthernetNetPortXdslParamEntry 5 } cmEthernetNetPortXdslStatus OBJECT-TYPE SYNTAX XDSLStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Xdsl link status." ::= { cmEthernetNetPortXdslParamEntry 6 } cmEthernetNetPortXdslCurVdslProfile OBJECT-TYPE SYNTAX VDSLProfileField MAX-ACCESS read-only STATUS current DESCRIPTION "Selected vdsl profile." ::= { cmEthernetNetPortXdslParamEntry 7 } cmEthernetNetPortXdslActualLinkRateUpStream OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual link rate upstream." ::= { cmEthernetNetPortXdslParamEntry 8 } cmEthernetNetPortXdslActualLinkRateDownStream OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual link rate downstream." ::= { cmEthernetNetPortXdslParamEntry 9 } cmEthernetNetPortXdslControlChannel OBJECT-TYPE SYNTAX XDSLControlChannel MAX-ACCESS read-write STATUS current DESCRIPTION "Actual link rate downstream." ::= { cmEthernetNetPortXdslParamEntry 10 } cmEthernetNetPortXdslCarrierSet OBJECT-TYPE SYNTAX XDSLCarrierSet MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the carrier set." ::= { cmEthernetNetPortXdslParamEntry 11 } cmEthernetNetPortXdslMode OBJECT-TYPE SYNTAX XDSLMode MAX-ACCESS read-only STATUS current DESCRIPTION "Xdsl mode after handshake." ::= { cmEthernetNetPortXdslParamEntry 12 } cmEthernetNetPortXdslAnnex OBJECT-TYPE SYNTAX XDSLAnnex MAX-ACCESS read-only STATUS current DESCRIPTION "Annex version after handshake." ::= { cmEthernetNetPortXdslParamEntry 13 } cmEthernetNetPortXdslDsSNRMargin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Downstream SNR margin." ::= { cmEthernetNetPortXdslParamEntry 14 } cmEthernetNetPortXdslUsSNRMargin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upstream SNR margin." ::= { cmEthernetNetPortXdslParamEntry 15 } cmEthernetNetPortXdslDsSignalAttenuation OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Downstream signal attenuation." ::= { cmEthernetNetPortXdslParamEntry 16 } cmEthernetNetPortXdslDsLineAttenuation OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Downstream line attenuation." ::= { cmEthernetNetPortXdslParamEntry 17 } cmEthernetNetPortXdslDsTxPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Downstream transmit power." ::= { cmEthernetNetPortXdslParamEntry 18 } cmEthernetNetPortXdslUsTxPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Upstream transmit power." ::= { cmEthernetNetPortXdslParamEntry 19 } cmEthernetNetPortXdslDsAttainableRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Attainable link rate downstream." ::= { cmEthernetNetPortXdslParamEntry 20 } cmEthernetNetPortXdslUsAttainableRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "attainable link rate upstream." ::= { cmEthernetNetPortXdslParamEntry 21 } -- -- SCI Port -- sciPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SciPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to SCI Port Facilities for configuration purposes." ::= { cmFacilityObjects 105 } sciPortEntry OBJECT-TYPE SYNTAX SciPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the sciPortTable." INDEX { neIndex, shelfIndex, slotIndex, sciPortIndex } ::= { sciPortTable 1 } SciPortEntry ::= SEQUENCE { -- Port Indices sciPortIndex Integer32, -- State Management params sciPortAdminState AdminState, sciPortOperationalState OperationalState, -- SCI port specific params sciPortSignalMode SciSignalMode, sciPortSignalDirection SciSignalDirection, sciPortRxSsmQL SciRxSsmQL } -- Port Indices sciPortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this SCI Port." ::= { sciPortEntry 1 } -- State Management params sciPortAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the SCI Port." ::= { sciPortEntry 2 } sciPortOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the SCI Port." ::= { sciPortEntry 3 } -- SCI port specific params sciPortSignalMode OBJECT-TYPE SYNTAX SciSignalMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the signal mode of the SCI port." ::= { sciPortEntry 4 } sciPortSignalDirection OBJECT-TYPE SYNTAX SciSignalDirection MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the signal direction of the SCI port." ::= { sciPortEntry 5 } sciPortRxSsmQL OBJECT-TYPE SYNTAX SciRxSsmQL MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the RX QL of the SCI port." ::= { sciPortEntry 6 } -- -- IRIG RS422 Output Port -- f3IrigRs422OutputPortTable OBJECT-TYPE SYNTAX SEQUENCE OF IrigRs422OutputPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to IRIG RS422 output ports." ::= { cmFacilityObjects 106 } f3IrigRs422OutputPortEntry OBJECT-TYPE SYNTAX IrigRs422OutputPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3IrigRs422OutputPortTable." INDEX { neIndex, shelfIndex, slotIndex, f3IrigRs422OutputPortIndex } ::= { f3IrigRs422OutputPortTable 1 } IrigRs422OutputPortEntry ::= SEQUENCE { -- Port Indices f3IrigRs422OutputPortIndex Integer32, f3IrigRs422OutputPortIfIndex InterfaceIndex, f3IrigRs422OutputPortEntityIndex PhysicalIndex, -- Alias f3IrigRs422OutputPortAlias DisplayString, -- State Management f3IrigRs422OutputPortAdminState AdminState, f3IrigRs422OutputPortOperationalState OperationalState, f3IrigRs422OutputPortSecondaryState SecondaryState, -- IRIG RS422 Output Port specific attributes f3IrigRs422OutputPortTimeCode IrigTimeCode, f3IrigRs422OutputPortControlField IrigControlField } -- Port Indices f3IrigRs422OutputPortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify this IRIG RS422 output port in its parent card." ::= { f3IrigRs422OutputPortEntry 1 } f3IrigRs422OutputPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value." ::= { f3IrigRs422OutputPortEntry 2 } f3IrigRs422OutputPortEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value." ::= { f3IrigRs422OutputPortEntry 3 } -- Alias f3IrigRs422OutputPortAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows SNMP management entities to provide an alias to the output port entity." ::= { f3IrigRs422OutputPortEntry 4 } -- State Management f3IrigRs422OutputPortAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the administrative state of the IRIG output port." ::= { f3IrigRs422OutputPortEntry 5 } f3IrigRs422OutputPortOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the operational state of the IRIG output port." ::= { f3IrigRs422OutputPortEntry 6 } f3IrigRs422OutputPortSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the IRIG output port." ::= { f3IrigRs422OutputPortEntry 7 } -- IRIG RS422 Output Port specific attributes f3IrigRs422OutputPortTimeCode OBJECT-TYPE SYNTAX IrigTimeCode MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the Time Code of the IRIG output port." ::= { f3IrigRs422OutputPortEntry 8 } f3IrigRs422OutputPortControlField OBJECT-TYPE SYNTAX IrigControlField MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the Control field of the IRIG output port." ::= { f3IrigRs422OutputPortEntry 9 } -- -- IRIG Optical Output Port -- f3IrigOpticalOutputPortTable OBJECT-TYPE SYNTAX SEQUENCE OF IrigOpticalOutputPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to IRIG Optical output ports." ::= { cmFacilityObjects 107 } f3IrigOpticalOutputPortEntry OBJECT-TYPE SYNTAX IrigOpticalOutputPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3IrigOpticalOutputPortTable." INDEX { neIndex, shelfIndex, slotIndex, f3IrigOpticalOutputPortIndex } ::= { f3IrigOpticalOutputPortTable 1 } IrigOpticalOutputPortEntry ::= SEQUENCE { -- Port Indices f3IrigOpticalOutputPortIndex Integer32, f3IrigOpticalOutputPortIfIndex InterfaceIndex, f3IrigOpticalOutputPortEntityIndex PhysicalIndex, -- Alias f3IrigOpticalOutputPortAlias DisplayString, -- State Management f3IrigOpticalOutputPortAdminState AdminState, f3IrigOpticalOutputPortOperationalState OperationalState, f3IrigOpticalOutputPortSecondaryState SecondaryState, -- IRIG Optical Output Port specific attributes f3IrigOpticalOutputPortTimeCode IrigTimeCode, f3IrigOpticalOutputPortControlField IrigControlField } -- Port Indices f3IrigOpticalOutputPortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify this IRIG optical output port in it parent card." ::= { f3IrigOpticalOutputPortEntry 1 } f3IrigOpticalOutputPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value." ::= { f3IrigOpticalOutputPortEntry 2 } f3IrigOpticalOutputPortEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value." ::= { f3IrigOpticalOutputPortEntry 3 } -- Alias f3IrigOpticalOutputPortAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows SNMP management entities to provide an alias to the output port entity." ::= { f3IrigOpticalOutputPortEntry 4 } -- State Management f3IrigOpticalOutputPortAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the administrative state of the IRIG output port." ::= { f3IrigOpticalOutputPortEntry 5 } f3IrigOpticalOutputPortOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the operational state of the IRIG output port." ::= { f3IrigOpticalOutputPortEntry 6 } f3IrigOpticalOutputPortSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the IRIG output port." ::= { f3IrigOpticalOutputPortEntry 7 } -- IRIG Optical Output port specific attributes f3IrigOpticalOutputPortTimeCode OBJECT-TYPE SYNTAX IrigTimeCode MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the Time Code of the IRIG output port." ::= { f3IrigOpticalOutputPortEntry 8 } f3IrigOpticalOutputPortControlField OBJECT-TYPE SYNTAX IrigControlField MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the Control field of the IRIG output port." ::= { f3IrigOpticalOutputPortEntry 9 } -- -- IRIG Time Relay Output Port -- f3IrigRelayOutputPortTable OBJECT-TYPE SYNTAX SEQUENCE OF IrigRelayOutputPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to IRIG time relay output ports." ::= { cmFacilityObjects 108 } f3IrigRelayOutputPortEntry OBJECT-TYPE SYNTAX IrigRelayOutputPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3IrigRelayOutputPortTable." INDEX { neIndex, shelfIndex, slotIndex, f3IrigRelayOutputPortIndex } ::= { f3IrigRelayOutputPortTable 1 } IrigRelayOutputPortEntry ::= SEQUENCE { -- Port Indices f3IrigRelayOutputPortIndex Integer32, f3IrigRelayOutputPortIfIndex InterfaceIndex, f3IrigRelayOutputPortEntityIndex PhysicalIndex, -- Alias f3IrigRelayOutputPortAlias DisplayString, -- State Management f3IrigRelayOutputPortAdminState AdminState, f3IrigRelayOutputPortOperationalState OperationalState, f3IrigRelayOutputPortSecondaryState SecondaryState, -- IRIG Time Relay Output Port specific attributes f3IrigRelayOutputPortRelayOperation IrigRelayOperation } -- Port Indices f3IrigRelayOutputPortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify this IRIG time relay output port in its parent card." ::= { f3IrigRelayOutputPortEntry 1 } f3IrigRelayOutputPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value." ::= { f3IrigRelayOutputPortEntry 2 } f3IrigRelayOutputPortEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value." ::= { f3IrigRelayOutputPortEntry 3 } -- Alias f3IrigRelayOutputPortAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows SNMP management entities to provide an alias to the output port entity." ::= { f3IrigRelayOutputPortEntry 4 } -- State Management f3IrigRelayOutputPortAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the administrative state of the IRIG output port." ::= { f3IrigRelayOutputPortEntry 5 } f3IrigRelayOutputPortOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the operational state of the IRIG output port." ::= { f3IrigRelayOutputPortEntry 6 } f3IrigRelayOutputPortSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the IRIG output port." ::= { f3IrigRelayOutputPortEntry 7 } -- IRIG Time Relay Output Port specific attributes f3IrigRelayOutputPortRelayOperation OBJECT-TYPE SYNTAX IrigRelayOperation MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the relay operation of the IRIG output port." ::= { f3IrigRelayOutputPortEntry 8 } -- -- IRIG Output Group -- f3IrigOutputGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF IrigOutputGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to output groups." ::= { cmFacilityObjects 109 } f3IrigOutputGroupEntry OBJECT-TYPE SYNTAX IrigOutputGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3IrigOutputGroupTable." INDEX { neIndex, shelfIndex, slotIndex, f3IrigOutputGroupIndex } ::= { f3IrigOutputGroupTable 1 } IrigOutputGroupEntry ::= SEQUENCE { -- Group Index f3IrigOutputGroupIndex Integer32, f3IrigOutputGroupIfIndex InterfaceIndex, f3IrigOutputGroupEntityIndex PhysicalIndex, -- Alias f3IrigOutputGroupAlias DisplayString, -- IRIG Output Group specific attributes f3IrigOutputGroupExtensionType IrigGroupExtensionType, f3IrigOutputGroupExtensionDetection TruthValue } -- Group Index f3IrigOutputGroupIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify this IRIG output group in its parent card." ::= { f3IrigOutputGroupEntry 1 } f3IrigOutputGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value." ::= { f3IrigOutputGroupEntry 2 } f3IrigOutputGroupEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value." ::= { f3IrigOutputGroupEntry 3 } -- Alias f3IrigOutputGroupAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows SNMP management entities to provide an alias to the output group entity." ::= { f3IrigOutputGroupEntry 4 } -- IRIG Output Group specific attributes f3IrigOutputGroupExtensionType OBJECT-TYPE SYNTAX IrigGroupExtensionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the Time Code of the IRIG output group." ::= { f3IrigOutputGroupEntry 5 } f3IrigOutputGroupExtensionDetection OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows to manage the Control field of the IRIG output group." ::= { f3IrigOutputGroupEntry 6 } -- -- IRIG Output Unit Port -- f3IrigOutputUnitPortTable OBJECT-TYPE SYNTAX SEQUENCE OF IrigOutputUnitPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to IRIG output unit ports in IRIG output groups for management purposes." ::= { cmFacilityObjects 110 } f3IrigOutputUnitPortEntry OBJECT-TYPE SYNTAX IrigOutputUnitPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3IrigOutputUnitPortTable." INDEX { neIndex, shelfIndex, slotIndex, f3IrigOutputGroupIndex, f3IrigOutputUnitPortIndex } ::= { f3IrigOutputUnitPortTable 1 } IrigOutputUnitPortEntry ::= SEQUENCE { -- Port Indices f3IrigOutputUnitPortIndex Integer32, f3IrigOutputUnitPortIfIndex InterfaceIndex, f3IrigOutputUnitPortEntityIndex PhysicalIndex, -- Alias f3IrigOutputUnitPortAlias DisplayString, -- State Management f3IrigOutputUnitPortAdminState AdminState, f3IrigOutputUnitPortOperationalState OperationalState, f3IrigOutputUnitPortSecondaryState SecondaryState, -- IRIG Output port specific attributes f3IrigOutputUnitPortTimeCode IrigTimeCode, f3IrigOutputUnitPortControlField IrigControlField, f3IrigOutputUnitPortType IrigOutputType, f3IrigOutputUnitPortDigitalVoltage IrigDigitalSignalVoltage } -- Port Indices f3IrigOutputUnitPortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify this IRIG output unit port in its output group." ::= { f3IrigOutputUnitPortEntry 1 } f3IrigOutputUnitPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this output port as an interface in ifTable entries with ifIndex value." ::= { f3IrigOutputUnitPortEntry 2 } f3IrigOutputUnitPortEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this output port as an entity in entityPhysical entries with entPhysicalIndex value." ::= { f3IrigOutputUnitPortEntry 3 } -- Alias f3IrigOutputUnitPortAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows SNMP management entities to provide an alias to the output port entity." ::= { f3IrigOutputUnitPortEntry 4 } -- State Management f3IrigOutputUnitPortAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the administrative state of the IRIG output port." ::= { f3IrigOutputUnitPortEntry 5 } f3IrigOutputUnitPortOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the operational state of the IRIG output port." ::= { f3IrigOutputUnitPortEntry 6 } f3IrigOutputUnitPortSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the IRIG output port." ::= { f3IrigOutputUnitPortEntry 7 } -- IRIG Output port specific attributes f3IrigOutputUnitPortTimeCode OBJECT-TYPE SYNTAX IrigTimeCode MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the Time Code of the IRIG output port." ::= { f3IrigOutputUnitPortEntry 8 } f3IrigOutputUnitPortControlField OBJECT-TYPE SYNTAX IrigControlField MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the Control field of the IRIG output port." ::= { f3IrigOutputUnitPortEntry 9 } f3IrigOutputUnitPortType OBJECT-TYPE SYNTAX IrigOutputType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage the output type, digital or analogous, of the IRIG output port." ::= { f3IrigOutputUnitPortEntry 10 } f3IrigOutputUnitPortDigitalVoltage OBJECT-TYPE SYNTAX IrigDigitalSignalVoltage MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to manage, for digital output type only, the voltage of the IRIG output port." ::= { f3IrigOutputUnitPortEntry 11 } -- -- CC Card Input port -- ccInputPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CcInputPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Composite input Port Facilities for configuration purposes." ::= { cmFacilityObjects 111 } ccInputPortEntry OBJECT-TYPE SYNTAX CcInputPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the ccInputPortTable." INDEX { neIndex, shelfIndex, slotIndex, ccInputPortIndex } ::= { ccInputPortTable 1 } CcInputPortEntry ::= SEQUENCE { -- Port Indices ccInputPortIndex Integer32, ccInputPortIfIndex InterfaceIndex, ccInputPortEntityIndex PhysicalIndex, -- Alias ccInputPortAlias DisplayString, -- State Management params ccInputPortAdminState AdminState, ccInputPortOperationalState OperationalState, ccInputPortSecondaryState SecondaryState -- ccInputPort port specific params } -- Port Indices ccInputPortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this CC input Port." ::= { ccInputPortEntry 1 } ccInputPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this input port as an interface in ifTable entries with ifIndex value." ::= { ccInputPortEntry 2 } ccInputPortEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this input port as an entity in entityPhysical entries with entPhysicalIndex value." ::= { ccInputPortEntry 3 } -- Alias ccInputPortAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows SNMP management entities to provide an alias to the input port entity." ::= { ccInputPortEntry 4 } -- State Management params ccInputPortAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the CC input Port." ::= { ccInputPortEntry 5 } ccInputPortOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the CC input Port." ::= { ccInputPortEntry 6 } ccInputPortSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the CC input port." ::= { ccInputPortEntry 7 } -- ccInputPort port specific params -- -- CC Card Input port -- ccGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF CcGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Composite group output Facilities for configuration purposes." ::= { cmFacilityObjects 112 } ccGroupEntry OBJECT-TYPE SYNTAX CcGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the ccGroupTable." INDEX { neIndex, shelfIndex, slotIndex, ccGroupIndex } ::= { ccGroupTable 1 } CcGroupEntry ::= SEQUENCE { -- Port Indices ccGroupIndex Integer32, ccGroupIfIndex InterfaceIndex, ccGroupEntityIndex PhysicalIndex, -- Alias ccGroupAlias DisplayString, -- ccGroup port specific params ccGroupActivePorts CcActivePortState, ccGroupPhaseAdjust Integer32, ccGroupDutyCycle CcPortDutyCycle } -- Port Indices ccGroupIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this CC Group." ::= { ccGroupEntry 1 } ccGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this group as an interface in ifTable entries with ifIndex value." ::= { ccGroupEntry 2 } ccGroupEntityIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this input port as an entity in entityPhysical entries with entPhysicalIndex value." ::= { ccGroupEntry 3 } -- Alias ccGroupAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows SNMP management entities to provide an alias to the group entity." ::= { ccGroupEntry 4 } -- ccGroup port specific params ccGroupActivePorts OBJECT-TYPE SYNTAX CcActivePortState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Active State for each port of the CC 10 output port Group." ::= { ccGroupEntry 5 } ccGroupPhaseAdjust OBJECT-TYPE SYNTAX Integer32 (0..249999) MAX-ACCESS read-write STATUS current DESCRIPTION "The delay of CC output. This value is duplicated to all the CC outputs of all the CC cards in the same 54x0. This value is usually derived from a phase measurement of the CC input. It could also use a different method to derive the CC Phase Adjust.." ::= { ccGroupEntry 6 } ccGroupDutyCycle OBJECT-TYPE SYNTAX CcPortDutyCycle MAX-ACCESS read-write STATUS current DESCRIPTION "63/37 or 50/50 duty cycles." ::= { ccGroupEntry 7 } -- -- Encap FlowPoint -- cmEncapFlowPointTable OBJECT-TYPE SYNTAX SEQUENCE OF CmEncapFlowPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Encap FlowPoint for configuration purposes." ::= { cmFacilityObjects 113 } cmEncapFlowPointEntry OBJECT-TYPE SYNTAX CmEncapFlowPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmEncapFlowPointTable. These entries represent an Encap FlowPoint." INDEX { neIndex, cmEncapFlowPointIndex } ::= { cmEncapFlowPointTable 1 } CmEncapFlowPointEntry ::= SEQUENCE { -- EncapFlowPoint Index/Id cmEncapFlowPointIndex Integer32, cmEncapFlowPointCircuitName DisplayString, cmEncapFlowPointAssociatedFlowId VariablePointer, cmEncapFlowPointRefEoMplsPwObject VariablePointer, cmEncapFlowPointCTagControl FlowTagControl, cmEncapFlowPointCTagVlanId VlanId, cmEncapFlowPointCTagVlanPriority VlanPriority, cmEncapFlowPointSTagControl FlowTagControl, cmEncapFlowPointSTagVlanId VlanId, cmEncapFlowPointSTagVlanPriority VlanPriority, cmEncapFlowPointEgressOuterTagPrioMapEnabled TruthValue, cmEncapFlowPointEgressInnerTagPrioMapEnabled TruthValue, cmEncapFlowPointRefPrioMapProfile VariablePointer, cmEncapFlowPointStorageType StorageType, cmEncapFlowPointRowStatus RowStatus } cmEncapFlowPointIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The integer index value corresponding to an Encap FlowPoint." ::= { cmEncapFlowPointEntry 1 } cmEncapFlowPointCircuitName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows SNMP management entities to provide a circuit identifier with the FlowPoint." ::= { cmEncapFlowPointEntry 2 } cmEncapFlowPointAssociatedFlowId OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the association of an Flow with an Encap FlowPoint." ::= { cmEncapFlowPointEntry 3 } cmEncapFlowPointRefEoMplsPwObject OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies EoMpls Pw object OID." ::= { cmEncapFlowPointEntry 4 } cmEncapFlowPointCTagControl OBJECT-TYPE SYNTAX FlowTagControl MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3EncapFlowPointCTagVlanId) and priority (f3EncapFlowPointCTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified f3EncapFlowPointCTagVlanId and f3EncapFlowPointCTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified f3EncapFlowPointCTagVlanId; if the type is 'none', no C-TAG management is performed." ::= { cmEncapFlowPointEntry 5 } cmEncapFlowPointCTagVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3EncapFlowPointIngressCTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types." ::= { cmEncapFlowPointEntry 6 } cmEncapFlowPointCTagVlanPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3EncapFlowPointIngressCTagControl. It is applicable for 'push' and 'swaptag' control types." ::= { cmEncapFlowPointEntry 7 } cmEncapFlowPointSTagControl OBJECT-TYPE SYNTAX FlowTagControl MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3EncapFlowPointSTagVlanId) and priority (f3EncapFlowPointSTagVlanPriority) are pushed onto the frame; if the type is 'pushvid', only the VLAN Id (12 bits) is pushed, the Priority is copied from incoming tag's priority; if the type is 'swaptag', both VLAN Id and Priority (15 bits) are swapped with the specified f3EncapFlowPointSTagVlanId and f3EncapFlowPointSTagVlanPriority; if the type is 'swapvid', only the VLAN Id (12 bits) are swapped with the specified f3EncapFlowPointSTagVlanId; if the type is 'none', no S-TAG management is performed." ::= { cmEncapFlowPointEntry 8 } cmEncapFlowPointSTagVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3EncapFlowPointIngressSTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types." ::= { cmEncapFlowPointEntry 9 } cmEncapFlowPointSTagVlanPriority OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3EncapFlowPointIngressSTagControl. It is applicable for 'push' and 'swaptag' control types." ::= { cmEncapFlowPointEntry 10 } cmEncapFlowPointEgressOuterTagPrioMapEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled,the EgressPrioMapTable operations are ignored for specified Flow COS." ::= { cmEncapFlowPointEntry 11 } cmEncapFlowPointEgressInnerTagPrioMapEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines whether to use the Egress Prio Mapping to swap the priority of inner tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS. When Disabled, the EgressPrioMapTable operations are ignored for specified Flow COS." ::= { cmEncapFlowPointEntry 12 } cmEncapFlowPointRefPrioMapProfile OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to set priority map profile." ::= { cmEncapFlowPointEntry 13 } cmEncapFlowPointStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmEncapFlowPointEntry 14 } cmEncapFlowPointRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmEncapFlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmEncapFlowPointRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmEncapFlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmEncapFlowPointEntry 15 } -- -- Conformance -- cmFacilityCompliances OBJECT IDENTIFIER ::= {cmFacilityConformance 1} cmFacilityGroups OBJECT IDENTIFIER ::= {cmFacilityConformance 2} cmFacilityCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Describes the requirements for conformance to the CM Facility group." MODULE -- this module MANDATORY-GROUPS { cmFacilityObjectGroup, ethernetAccessPortGroup, ethernetNetworkPortGroup, ethernetMgmtPortGroup, bitsPortGroup, trafficGroup, prioMapGroup, pcpEncodeGroup, cpdV2Group, trafficGroupCmHub, ocnStmGroup, stsVcPathGroup, vtVcPathGroup, e1t1InterfaceGroup, e3t3InterfaceGroup, f3PulsePerSecondPortGroup, f3TimeOfDayPortGroup, f3Gps10MhzPortGroup, neTMParamsGroup, cmEthernetTrafficPortJdsuExtGroup, f3FpQosShaperGroup, f3FpQosPolicerGroup, cpdV2TrafficPortGroup, f3AclRuleGroup } ::= { cmFacilityCompliances 1 } cmFacilityObjectGroup OBJECT-GROUP OBJECTS { cmEthernetAccPortIndex, cmEthernetAccPortIfIndex, cmEthernetAccPortOperationalState, cmEthernetAccPortSecondaryState, cmEthernetAccPortMTU, cmEthernetAccPortMediaType, cmEthernetAccPortConfigSpeed, cmEthernetAccPortNegotiatedSpeed, cmEthernetAccPortMDIXType, cmEthernetAccPortJumboFramesEnabled, cmEthernetAccPortSfpVendorName, cmEthernetAccPortSfpPartNumber, cmEthernetAccPortSfpSerialNumber, cmEthernetAccPortSfpDateOfManufacture, cmEthernetAccPortSfpConnectorValue, cmEthernetAccPortInitiateDiag, cmEthernetAccPortDiagnosePair1Cond, cmEthernetAccPortDiagnosePair2Cond, cmEthernetAccPortDiagnosePair3Cond, cmEthernetAccPortDiagnosePair4Cond, cmEthernetAccPortDiagnoseAutoNegCond, cmEthernetAccPortDiagnoseLpbkCond, cmEthernetAccPortDiagnoseEfmLpbkCond, cmEthernetAccPortDiagnoseResult,cmEthernetAccPortDiagnoseTestStatus, cmEthernetAccPortDiagnoseTestTime, cmEthernetAccPortLoopbackConfig, cmEthernetAccPortLoopbackStatus, cmEthernetAccPortLoopbackTime, cmEthernetAccPortLoopbackSwapSADA, cmEthernetAccPortOuterVlanLoopbackMask, cmEthernetAccPortOuterVlanLoopback1, cmEthernetAccPortOuterVlanLoopback2, cmEthernetAccPortOuterVlanLoopback3, cmEthernetAccPortInnerVlanLoopbackMask, cmEthernetAccPortInnerVlanLoopback1, cmEthernetAccPortInnerVlanLoopback2, cmEthernetAccPortInnerVlanLoopback3, cmEthernetAccPortLinkLossFwdEnabled, cmEthernetAccPortLinkLossFwdSignalType, cmEthernetAccPortLinkLossFwdTriggerTypes, cmEthernetAccPortLinkLossFwdDelay, cmEthernetAccPortLinkLossFwdActive, cmEthernetAccPortLinkLossFwdPartnerEnabled, cmEthernetAccPortLinkLossFwdLocalLinkId, cmEthernetAccPortLinkLossFwdRemoteLinkIds, cmEthernetAccPortOamId, cmEthernetAccPortOamAdminDisposition, cmEthernetAccPortOamDiscoveryState, cmEthernetAccPortOamLocalVarRtrvsEnabled, cmEthernetAccPortOamLocalLinkEventsEnabled, cmEthernetAccPortOamLocalOamLoopbacksSupported, cmEthernetAccPortOamLocalUnidirSupportEnabled, cmEthernetAccPortOamLocalMaxPDUSize, cmEthernetAccPortOamLocalMode, cmEthernetAccPortOamRemoteMacAddress, cmEthernetAccPortOamRemoteVarRtrvsEnabled, cmEthernetAccPortOamRemoteLinkEventsEnabled, cmEthernetAccPortOamRemoteOamLoopbacksSupported, cmEthernetAccPortOamRemoteUnidirSupportEnabled, cmEthernetAccPortOamRemoteMaxPDUSize, cmEthernetAccPortOamRemoteMode, cmEthernetAccPortMode, cmEthernetAccPortSvcType, cmEthernetAccPortRxPauseDisposition, cmEthernetAccPortTxPauseEnabled, cmEthernetAccPortAfpType, cmEthernetAccPortCpdIndex, cmEthernetAccPortCpdFilterType, cmEthernetAccPortCpdFilterDescr, cmEthernetAccPortCpdDispType, cmEthernetAccPortCpdMacAddressMatch, cmEthernetAccPortCpdMacAddressMask, cmEthernetAccPortCpdEthertype, cmEthernetAccPortCpdEthertypeMask, cmEthernetAccPortCpdSubtype, cmEthernetAccPortCpdSubtypeMask, cmEthernetAccPortClbIndex, cmEthernetAccPortClbEnabled, cmEthernetAccPortClbLength, cmEthernetAccPortClbDescr, cmEthernetAccPortMDIXStatus, cmEthernetAccPortSfpReach, cmEthernetAccPortSfpLaserWaveLength, cmEthernetAccPortSfpMediaType, cmEthernetAccPortOamEnabled, cmEthernetAccPortOamAdminState, cmEthernetAccPortShapingEnabled, cmEthernetAccPortShapedSpeedLo, cmEthernetAccPortShapedSpeedHi, cmEthernetAccPortQinQEtherType, cmEthernetAccPortRxPauseEnabled, cmEthernetAccPortAutoDiagEnabled, cmEthernetAccPortLinkLossFwdTxActionType, cmEthernetAccPortLinkLossFwdRxRLDLinkIds, cmEthernetAccPortN2AVlanTrunkingEnabled, cmEthernetAccPortA2NPushPVIDEnabled, cmEthernetAccPortN2APopPVIDEnabled, cmEthernetAccPortPortVlanId, cmEthernetAccPortPortVlanPriority, cmEthernetAccPortPrioMapMode, cmEthernetAccPortSyncEEnabled, cmEthernetAccPortQLModeEnabled, cmEthernetAccPortExpectedQL, cmEthernetAccPortAssumedQL, cmEthernetAccPortReceivedQL, cmEthernetAccPortTransmitQL, cmEthernetAccPortSfpName, cmEthernetAccPortSfpHardwareRevision, cmFlowIndex, cmFlowCircuitName, cmFlowAdminState, cmFlowOperationalState, cmFlowSecondaryState, cmFlowType, cmFlowMultiCOS, cmFlowA2NCIR, cmFlowA2NEIR, cmFlowN2ARateLimitingEnabled, cmFlowN2ACIR, cmFlowN2AEIR, cmFlowStorageType, cmFlowRowStatus, cmFlowTrafficType, cmFlowCOS, cmFlowVlanMemberList, cmFlowAction, cmFlowActionVlan, cmFlowUntaggedMemberEnabled, cmFlowA2NCIRHi, cmFlowA2NEIRHi, cmFlowN2ACIRHi, cmFlowN2AEIRHi, cmFlowHCOSMgmtEnabled, cmFlowGuaranteedA2NBandwidthLo, cmFlowGuaranteedA2NBandwidthHi, cmFlowMaximumA2NBandwidthLo, cmFlowMaximumA2NBandwidthHi, cmFlowCTagControl, cmFlowCTagVlanId, cmFlowCTagVlanPriority, cmFlowCTagMatchRxPrio, cmFlowSTagControl, cmFlowSTagVlanId, cmFlowSTagVlanPriority, cmFlowOuterTagPrioEnabled, cmFlowN2ACOSPriorityTagType, cmFlowESFramesLossThreshold, cmFlowSESFramesLossThresholdRatio, cmFlowPolicingEnabled, cmFlowPreserveSTagProperties, cmFlowInnerTagPrioEnabled, cmFlowN2AOuterTagPrioEnabled, cmFlowCpdIndex, cmFlowCpdFilterType, cmFlowCpdFilterDescr, cmFlowCpdDispType, cmFlowCpdMacAddressMatch, cmFlowCpdMacAddressMask, cmFlowCpdEthertype, cmFlowCpdEthertypeMask, cmFlowCpdSubtype, cmFlowCpdSubtypeMask, cmQosShaperTypeIndex, cmQosShaperIndex, cmQosShaperDirection, cmQosShaperAdminState, cmQosShaperOperationalState,cmQosShaperSecondaryState, cmQosShaperCIR, cmQosShaperCBS, cmQosShaperEIR, cmQosShaperEBS, cmQosShaperBufferSize, cmQosShaperStorageType, cmQosShaperRowStatus, cmQosShaperCOS, cmQosShaperCIRHi, cmQosShaperEIRHi, cmEthernetNetPortIndex, cmEthernetNetPortIfIndex, cmEthernetNetPortEntityIndex, cmEthernetNetPortAdminState, cmEthernetNetPortOperationalState, cmEthernetNetPortSecondaryState, cmEthernetNetPortMTU, cmEthernetNetPortMediaType, cmEthernetNetPortConfigSpeed, cmEthernetNetPortNegotiatedSpeed, cmEthernetNetPortMDIXType, cmEthernetNetPortJumboFramesEnabled, cmEthernetNetPortSfpVendorName, cmEthernetNetPortSfpPartNumber, cmEthernetNetPortSfpSerialNumber, cmEthernetNetPortSfpDateOfManufacture, cmEthernetNetPortSfpConnectorValue, cmEthernetNetPortInitiateDiag, cmEthernetNetPortDiagnosePair1Cond, cmEthernetNetPortDiagnosePair2Cond, cmEthernetNetPortDiagnosePair3Cond, cmEthernetNetPortDiagnosePair4Cond, cmEthernetNetPortDiagnoseAutoNegCond, cmEthernetNetPortDiagnoseLpbkCond, cmEthernetNetPortDiagnoseEfmLpbkCond, cmEthernetNetPortDiagnoseResult,cmEthernetNetPortDiagnoseTestStatus, cmEthernetNetPortDiagnoseTestTime, cmEthernetNetPortLoopbackConfig, cmEthernetNetPortLoopbackStatus, cmEthernetNetPortLoopbackTime, cmEthernetNetPortLoopbackSwapSADA, cmEthernetNetPortOuterVlanLoopbackMask, cmEthernetNetPortOuterVlanLoopback1, cmEthernetNetPortOuterVlanLoopback2, cmEthernetNetPortOuterVlanLoopback3, cmEthernetNetPortInnerVlanLoopbackMask, cmEthernetNetPortInnerVlanLoopback1, cmEthernetNetPortInnerVlanLoopback2, cmEthernetNetPortInnerVlanLoopback3, cmEthernetNetPortLinkLossFwdEnabled, cmEthernetNetPortLinkLossFwdSignalType, cmEthernetNetPortLinkLossFwdTriggerTypes,cmEthernetNetPortLinkLossFwdDelay, cmEthernetNetPortLinkLossFwdActive, cmEthernetNetPortLinkLossFwdPartnerEnabled, cmEthernetNetPortLinkLossFwdLocalLinkId, cmEthernetNetPortLinkLossFwdRemoteLinkIds, cmEthernetNetPortOamId, cmEthernetNetPortOamAdminDisposition, cmEthernetNetPortOamDiscoveryState, cmEthernetNetPortOamLocalVarRtrvsEnabled, cmEthernetNetPortOamLocalLinkEventsEnabled, cmEthernetNetPortOamLocalOamLoopbacksSupported, cmEthernetNetPortOamLocalUnidirSupportEnabled, cmEthernetNetPortOamLocalMaxPDUSize, cmEthernetNetPortOamLocalMode, cmEthernetNetPortOamRemoteMacAddress, cmEthernetNetPortOamRemoteVarRtrvsEnabled, cmEthernetNetPortOamRemoteLinkEventsEnabled, cmEthernetNetPortOamRemoteOamLoopbacksSupported, cmEthernetNetPortOamRemoteUnidirSupportEnabled, cmEthernetNetPortOamRemoteMaxPDUSize, cmEthernetNetPortOamRemoteMode, cmEthernetNetPortRxPauseDisposition, cmEthernetNetPortTxPauseEnabled, cmEthernetNetPortAfpType, cmEthernetNetPortSfpName, cmEthernetNetPortSfpHardwareRevision, cmEthernetNetPortMDIXStatus, cmEthernetNetPortSfpReach, cmEthernetNetPortSfpLaserWaveLength, cmEthernetNetPortSfpMediaType, cmEthernetNetPortOamEnabled, cmEthernetNetPortOamAdminState, cmEthernetNetPortShapingEnabled, cmEthernetNetPortShapedSpeedLo, cmEthernetNetPortShapedSpeedHi, cmEthernetNetPortQinQEtherType, cmEthernetNetPortLinkLossFwdTxActionType, cmEthernetNetPortLinkLossFwdRxRLDLinkIds, cmEthernetNetPortAutoDiagEnabled, cmEthernetNetPortSyncEEnabled, cmEthernetNetPortQLModeEnabled, cmEthernetNetPortExpectedQL, cmEthernetNetPortAssumedQL, cmEthernetNetPortReceivedQL, cmEthernetNetPortTransmitQL, cmEthernetNetPortCpdIndex, cmEthernetNetPortCpdFilterType, cmEthernetNetPortCpdFilterDescr, cmEthernetNetPortCpdDispType, cmEthernetNetPortCpdMacAddressMatch, cmEthernetNetPortCpdMacAddressMask, cmEthernetNetPortCpdEthertype, cmEthernetNetPortCpdEthertypeMask, cmEthernetNetPortCpdSubtype, cmEthernetNetPortCpdSubtypeMask, cmEthernetMgmtPortIndex, cmEthernetMgmtPortEntityIndex, cmEthernetMgmtPortAdminState, cmEthernetMgmtPortOperationalState, cmEthernetMgmtPortSecondaryState, cmEthernetMgmtPortMTU, cmEthernetMgmtPortConfigSpeed, cmEthernetMgmtPortNegotiatedSpeed, cmEthernetMgmtPortMDIXType, cmEthernetMgmtPortMDIXStatus, cmPrioMapIndex, cmPrioMapInPriority, cmPrioMapXTagControl, cmPrioMapXTagPriority, cmPrioMapCOS, cmPrioMapOuterTagPriority, cmPrioMapInnerTagPriority, cmQosFlowPolicerTypeIndex, cmQosFlowPolicerIndex, cmQosFlowPolicerDirection, cmQosFlowPolicerAdminState, cmQosFlowPolicerOperationalState, cmQosFlowPolicerSecondaryState, cmQosFlowPolicerCIRLo, cmQosFlowPolicerCIRHi, cmQosFlowPolicerEIRLo, cmQosFlowPolicerEIRHi, cmQosFlowPolicerCBS, cmQosFlowPolicerEBS, cmQosFlowPolicerAlgorithm, cmQosFlowPolicerColorMode, cmQosFlowPolicerColorMarkingFlag, cmQosFlowPolicerCouplingFlag, cmQosFlowPolicerAssociatedShaper, cmQosFlowPolicerStorageType, cmQosFlowPolicerRowStatus, cmAccPortQosShaperIndex, cmAccPortQosShaperDirection, cmAccPortQosShaperAdminState, cmAccPortQosShaperOperationalState, cmAccPortQosShaperSecondaryState, cmAccPortQosShaperCIRLo, cmAccPortQosShaperCIRHi, cmAccPortQosShaperEIRLo, cmAccPortQosShaperEIRHi, cmAccPortQosShaperCBS, cmAccPortQosShaperEBS, cmAccPortQosShaperBufferSize, cmAccPortQosShaperCOS, cmEthernetAccPortCpdV2Index, cmEthernetAccPortCpdV2CiscoGroupDispType, cmEthernetAccPortCpdV2IslDispType, cmEthernetAccPortCpdV2PagpDispType, cmEthernetAccPortCpdV2UdldDispType, cmEthernetAccPortCpdV2CdpDispType, cmEthernetAccPortCpdV2VtpDispType, cmEthernetAccPortCpdV2DtpDispType, cmEthernetAccPortCpdV2PvstpPlusDispType, cmEthernetAccPortCpdV2UplinkFastDispType, cmEthernetAccPortCpdV2VlanBridgeDispType, cmEthernetAccPortCpdV2L2PTDispType, cmEthernetAccPortCpdV2BridgeGroupDispType, cmEthernetAccPortCpdV2BPDUDispType, cmEthernetAccPortCpdV2PauseDispType, cmEthernetAccPortCpdV2LACPDispType, cmEthernetAccPortCpdV2LACPMarkerDispType, cmEthernetAccPortCpdV2EfmOamDispType, cmEthernetAccPortCpdV2SSMDispType, cmEthernetAccPortCpdV2PortAuthenDispType, cmEthernetAccPortCpdV2BridgeReservedDispType, cmEthernetAccPortCpdV2LANBridgesDispType, cmEthernetAccPortCpdV2GARPGroupDispType, cmEthernetAccPortCpdV2GMRPDispType, cmEthernetAccPortCpdV2GVRPDispType, cmEthernetAccPortCpdV2GARPDispType, cmFlowCpdV2Index, cmFlowCpdV2CiscoGroupDispType, cmFlowCpdV2IslDispType, cmFlowCpdV2PagpDispType, cmFlowCpdV2UdldDispType, cmFlowCpdV2CdpDispType, cmFlowCpdV2VtpDispType, cmFlowCpdV2DtpDispType, cmFlowCpdV2PvstpPlusDispType, cmFlowCpdV2UplinkFastDispType, cmFlowCpdV2VlanBridgeDispType, cmFlowCpdV2L2PTDispType, cmFlowCpdV2BridgeGroupDispType, cmFlowCpdV2BPDUDispType, cmFlowCpdV2PauseDispType, cmFlowCpdV2LACPDispType, cmFlowCpdV2LACPMarkerDispType, cmFlowCpdV2EfmOamDispType, cmFlowCpdV2SSMDispType, cmFlowCpdV2PortAuthenDispType, cmFlowCpdV2BridgeReservedDispType, cmFlowCpdV2LANBridgesDispType, cmFlowCpdV2GARPGroupDispType, cmFlowCpdV2GMRPDispType, cmFlowCpdV2GVRPDispType, cmFlowCpdV2GARPDispType, cmFlowCpdV2ActiveControlProtocols, cmEthernetNetPortCpdV2Index, cmEthernetNetPortCpdV2CiscoGroupDispType, cmEthernetNetPortCpdV2IslDispType, cmEthernetNetPortCpdV2PagpDispType, cmEthernetNetPortCpdV2UdldDispType, cmEthernetNetPortCpdV2CdpDispType, cmEthernetNetPortCpdV2VtpDispType, cmEthernetNetPortCpdV2DtpDispType, cmEthernetNetPortCpdV2PvstpPlusDispType, cmEthernetNetPortCpdV2UplinkFastDispType, cmEthernetNetPortCpdV2VlanBridgeDispType, cmEthernetNetPortCpdV2L2PTDispType, cmEthernetNetPortCpdV2BridgeGroupDispType, cmEthernetNetPortCpdV2BPDUDispType, cmEthernetNetPortCpdV2PauseDispType, cmEthernetNetPortCpdV2LACPDispType, cmEthernetNetPortCpdV2LACPMarkerDispType, cmEthernetNetPortCpdV2EfmOamDispType, cmEthernetNetPortCpdV2SSMDispType, cmEthernetNetPortCpdV2PortAuthenDispType, cmEthernetNetPortCpdV2BridgeReservedDispType, cmEthernetNetPortCpdV2LANBridgesDispType, cmEthernetNetPortCpdV2GARPGroupDispType, cmEthernetNetPortCpdV2GMRPDispType, cmEthernetNetPortCpdV2GVRPDispType, cmEthernetNetPortCpdV2GARPDispType, bitsPortTypeIndex, bitsPortIndex, bitsPortIfIndex, bitsPortEntityIndex, bitsPortAdminState, bitsPortOperationalState, bitsPortSecondaryState, bitsPortType, bitsPortLineType, bitsPortLineCode, bitsPortFrameFormat, bitsPortSaBitDesignation, bitsPortQLModeEnabled, bitsPortExpectedQL, bitsPortAssumedQL, bitsPortReceivedQL, bitsPortTransmitQL, bitsPortSquelchQL, bitsPortLineBuildOut, bitsPortImpedance, bitsPortCrc4, bitsPortIdleCode, bitsPortAis, bitsPortSaBitsAdminState, bitsPortSquelchControl, bitsPortSignalShape, bitsPortSignalFrequency, ieee1588EthernetPortIndex, ieee1588EthernetPortIfIndex, ieee1588EthernetPortEntityIndex, ieee1588EthernetPortAdminState, ieee1588EthernetPortOperationalState, ieee1588EthernetPortSecondaryState, ieee1588EthernetPortMTU, ieee1588EthernetPortMediaType, ieee1588EthernetPortConfigSpeed, ieee1588EthernetPortNegotiatedSpeed, ieee1588EthernetPortMDIXType, gps10MHzPortIndex, gps10MHzPortIfIndex, gps10MHzPortEntityIndex, gps10MHzPortAdminState, gps10MHzPortOperationalState, gps10MHzPortSecondaryState, gps10MHzPortSignalDirection, gps10MHzPortSquelchControl, gps10MHzPortSquelchQL, gps10MHzPortFrequencySource, gps10MHzPortClockClass, gps10MHzPortClockAccuracy, gps10MHzPortTimeSource, gps10MHzPortAssumedQL,gps10MHzPortAlias, gps10MHzPortInputSignalType, cmEthernetNetPortClbIndex, cmEthernetNetPortClbEnabled, cmEthernetNetPortClbLength, cmEthernetNetPortClbDescr, cmNetPortPrioMapIndex, cmNetPortPrioMapInPriority, cmNetPortPrioMapCOS, cmNetPortPrioMapOuterTagPriority, cmAccPortPcpDEEncIndex, cmAccPortPcpDEEncInPriority, cmAccPortPcpDEEncDropIneligiblePrio, cmAccPortPcpDEEncDropEligiblePrio, cmAccPortPcpDEDecIndex, cmAccPortPcpDEDecInPriority, cmAccPortPcpDEDecOutPriority, cmAccPortPcpDEDecDropEligible, cmAccPortPcpDEPairIndex, cmAccPortPcpDEDropIneligiblePrio, cmAccPortPcpDEDropEligiblePrio, cmNetPortPcpDEEncIndex, cmNetPortPcpDEEncInPriority, cmNetPortPcpDEEncDropIneligiblePrio, cmNetPortPcpDEEncDropEligiblePrio, cmNetPortPcpDEDecIndex, cmNetPortPcpDEDecInPriority, cmNetPortPcpDEDecOutPriority, cmNetPortPcpDEDecDropEligible, cmNetPortPcpDEPairIndex, cmNetPortPcpDEDropIneligiblePrio, cmNetPortPcpDEDropEligiblePrio, cmPortCpdProfileIndex, cmPortCpdProfileName, cmPortCpdProfileCiscoGroupDispType, cmPortCpdProfileIslDispType, cmPortCpdProfilePagpDispType, cmPortCpdProfileUdldDispType, cmPortCpdProfileCdpDispType, cmPortCpdProfileVtpDispType, cmPortCpdProfileDtpDispType, cmPortCpdProfilePvstpPlusDispType, cmPortCpdProfileUplinkFastDispType, cmPortCpdProfileVlanBridgeDispType, cmPortCpdProfileL2PTDispType, cmPortCpdProfileBridgeGroupDispType, cmPortCpdProfileBPDUDispType, cmPortCpdProfilePauseDispType, cmPortCpdProfileLACPDispType, cmPortCpdProfileLACPMarkerDispType, cmPortCpdProfileEfmOamDispType, cmPortCpdProfileSSMDispType, cmPortCpdProfilePortAuthenDispType, cmPortCpdProfileBridgeReservedDispType, cmPortCpdProfileLANBridgesDispType, cmPortCpdProfileGARPGroupDispType, cmPortCpdProfileGMRPDispType, cmPortCpdProfileGVRPDispType, cmPortCpdProfileGARPDispType, cmPortCpdProfileLldpDispType, cmPortCpdProfileStorageType,cmPortCpdProfileRowStatus, cmPortCpdProfileMac00DispType, cmPortCpdProfileMac01DispType, cmPortCpdProfileMac02DispType, cmPortCpdProfileMac03DispType, cmPortCpdProfileMac04DispType, cmPortCpdProfileMac05DispType, cmPortCpdProfileMac06DispType, cmPortCpdProfileMac07DispType, cmPortCpdProfileMac08DispType, cmPortCpdProfileMac09DispType, cmPortCpdProfileMac0ADispType, cmPortCpdProfileMac0BDispType, cmPortCpdProfileMac0CDispType, cmPortCpdProfileMac0DDispType, cmPortCpdProfileMac0EDispType, cmPortCpdProfileMac0FDispType, cmPortCpdProfileNearestLLDPDispType, cmPortCpdProfileNonTpmrLLDPDispType, cmPortCpdProfileCustomerLLDPDispType, cmPortCpdProfileELMIDispType, cmFlowPointCpdProfileIndex, cmFlowPointCpdProfileName, cmFlowPointCpdProfileCiscoGroupDispType, cmFlowPointCpdProfileIslDispType, cmFlowPointCpdProfilePagpDispType, cmFlowPointCpdProfileUdldDispType, cmFlowPointCpdProfileCdpDispType, cmFlowPointCpdProfileVtpDispType, cmFlowPointCpdProfileDtpDispType, cmFlowPointCpdProfilePvstpPlusDispType, cmFlowPointCpdProfileUplinkFastDispType, cmFlowPointCpdProfileVlanBridgeDispType, cmFlowPointCpdProfileL2PTDispType, cmFlowPointCpdProfileBridgeGroupDispType, cmFlowPointCpdProfileBPDUDispType, cmFlowPointCpdProfilePauseDispType, cmFlowPointCpdProfileLACPDispType, cmFlowPointCpdProfileLACPMarkerDispType, cmFlowPointCpdProfileEfmOamDispType, cmFlowPointCpdProfileSSMDispType, cmFlowPointCpdProfilePortAuthenDispType, cmFlowPointCpdProfileBridgeReservedDispType, cmFlowPointCpdProfileLANBridgesDispType, cmFlowPointCpdProfileGARPGroupDispType, cmFlowPointCpdProfileGMRPDispType, cmFlowPointCpdProfileGVRPDispType, cmFlowPointCpdProfileGARPDispType, cmFlowPointCpdProfileLldpDispType, cmFlowPointCpdProfileStorageType,cmFlowPointCpdProfileRowStatus, cmFlowPointCpdProfileMac00DispType, cmFlowPointCpdProfileMac01DispType, cmFlowPointCpdProfileMac02DispType, cmFlowPointCpdProfileMac03DispType, cmFlowPointCpdProfileMac04DispType, cmFlowPointCpdProfileMac05DispType, cmFlowPointCpdProfileMac06DispType, cmFlowPointCpdProfileMac07DispType, cmFlowPointCpdProfileMac08DispType, cmFlowPointCpdProfileMac09DispType, cmFlowPointCpdProfileMac0ADispType, cmFlowPointCpdProfileMac0BDispType, cmFlowPointCpdProfileMac0CDispType, cmFlowPointCpdProfileMac0DDispType, cmFlowPointCpdProfileMac0EDispType, cmFlowPointCpdProfileMac0FDispType, cmFlowPointCpdProfileNearestLLDPDispType, cmFlowPointCpdProfileNonTpmrLLDPDispType, cmFlowPointCpdProfileCustomerLLDPDispType, cmFlowPointCpdProfileELMIDispType, cmEthernetTrafficPortCpdIndex,cmEthernetTrafficPortAssociatedCpdProfile, cmEthernetFlowPointCpdIndex,cmEthernetFlowPointAssociatedCpdProfile, cmEthernetTrafficPortIndex,cmEthernetTrafficPortIfIndex, cmEthernetTrafficPortEntityIndex,cmEthernetTrafficPortAdminState, cmEthernetTrafficPortOperationalState,cmEthernetTrafficPortSecondaryState, cmEthernetTrafficPortMTU,cmEthernetTrafficPortMediaType, cmEthernetTrafficPortConfigSpeed,cmEthernetTrafficPortNegotiatedSpeed, cmEthernetTrafficPortMDIXType,cmEthernetTrafficPortMDIXStatus, cmEthernetTrafficPortSfpVendorName,cmEthernetTrafficPortSfpPartNumber, cmEthernetTrafficPortSfpSerialNumber,cmEthernetTrafficPortSfpDateOfManufacture, cmEthernetTrafficPortSfpConnectorValue, cmEthernetTrafficPortSfpLinkLength,cmEthernetTrafficPortSfpLaserWaveLength, cmEthernetTrafficPortSfpMediaType,cmEthernetTrafficPortLoopbackConfig, cmEthernetTrafficPortLoopbackStatus,cmEthernetTrafficPortLoopbackTime, cmEthernetTrafficPortLoopbackSwapSADA,cmEthernetTrafficPortOuterVlanLoopbackMask, cmEthernetTrafficPortOuterVlanLoopback1,cmEthernetTrafficPortOuterVlanLoopback2, cmEthernetTrafficPortOuterVlanLoopback3,cmEthernetTrafficPortLinkLossFwdEnabled, cmEthernetTrafficPortLinkLossFwdSignalType,cmEthernetTrafficPortLinkLossFwdTriggerTypes, cmEthernetTrafficPortLinkLossFwdDelay,cmEthernetTrafficPortLinkLossFwdActive, cmEthernetTrafficPortLinkLossFwdPartnerEnabled,cmEthernetTrafficPortLinkLossFwdLocalLinkId, cmEthernetTrafficPortLinkLossFwdRemoteLinkIds,cmEthernetTrafficPortLinkLossFwdTxActionType, cmEthernetTrafficPortLinkLossFwdRxRLDLinkIds,cmEthernetTrafficPortOamId, cmEthernetTrafficPortOamDiscoveryState, cmEthernetTrafficPortOamLocalVarRtrvsEnabled,cmEthernetTrafficPortOamLocalLinkEventsEnabled, cmEthernetTrafficPortOamLocalOamLoopbacksSupported,cmEthernetTrafficPortOamLocalUnidirSupportEnabled, cmEthernetTrafficPortOamLocalMaxPDUSize,cmEthernetTrafficPortOamLocalMode, cmEthernetTrafficPortOamRemoteMacAddress,cmEthernetTrafficPortOamRemoteVarRtrvsEnabled, cmEthernetTrafficPortOamRemoteLinkEventsEnabled,cmEthernetTrafficPortOamRemoteOamLoopbacksSupported, cmEthernetTrafficPortOamRemoteUnidirSupportEnabled,cmEthernetTrafficPortOamRemoteMaxPDUSize, cmEthernetTrafficPortOamRemoteMode,cmEthernetTrafficPortOamEnabled, cmEthernetTrafficPortOamAdminState, cmEthernetTrafficPortSvcType, cmEthernetTrafficPortTxPauseEnabled,cmEthernetTrafficPortAfpType, cmEthernetTrafficPortShapingEnabled,cmEthernetTrafficPortShapedSpeedLo, cmEthernetTrafficPortShapedSpeedHi,cmEthernetTrafficPortQinQEtherType, cmEthernetTrafficPortEgressVlanTrunkingEnabled,cmEthernetTrafficPortIngressPushPVIDEnabled, cmEthernetTrafficPortEgressPopPVIDEnabled,cmEthernetTrafficPortPortVlanId, cmEthernetTrafficPortPortVlanPriority,cmEthernetTrafficPortPriorityVlanId, cmEthernetTrafficPortIngressPrioMapMode,cmEthernetTrafficPortIngressCOSPriority, cmEthernetTrafficPortEgressPopPriorityVidEnabled, cmEthernetTrafficPortSyncEEnabled, cmEthernetTrafficPortQLModeEnabled,cmEthernetTrafficPortExpectedQL, cmEthernetTrafficPortAssumedQL,cmEthernetTrafficPortReceivedQL, cmEthernetTrafficPortTransmitQL,cmEthernetTrafficPortTagFrameControl, cmEthernetTrafficPortRxPauseEnabled, cmEthernetTrafficPortPhyType, cmEthernetTrafficPortSfpLaserWaveLengthPicometer, cmEthernetTrafficPortRowStatus, cmEthernetTrafficPortSSMRemoteMacAddress, cmEthernetTrafficPortInnerVlanLoopbackMask, cmEthernetTrafficPortInnerVlanLoopback1, cmEthernetTrafficPortInnerVlanLoopback2, cmEthernetTrafficPortInnerVlanLoopback3, cmEthernetTrafficPortSfpName, cmEthernetTrafficPortSfpHardwareRevision, cmEthernetTrafficPortPlugType, cmEthernetTrafficPortPlugMode, cmEthernetTrafficPortPlugGMetroAutoTuningMode, cmEthernetTrafficPortPlugChannelType, cmEthernetTrafficPortPlugITUCbandChannel, cmEthernetTrafficPortPlugRelativeChannel, cmEthernetTrafficPortPlugFrequency, cmEthernetTrafficPortPlugOutOfBandChannelStatus, cmEthernetTrafficPortRemotePlugITUCbandChannel, cmEthernetTrafficPortRemotePlugRelativeChannel, cmEthernetTrafficPortRemotePlugFrequency, cmEthernetTrafficPortRemoteSfpVendorName, cmEthernetTrafficPortRemoteSfpName, cmEthernetTrafficPortRemoteSfpPartNumber, cmEthernetTrafficPortRemoteSfpHardwareRevision, cmEthernetTrafficPortRemoteSfpSerialNumber, cmEthernetTrafficPortRemoteSfpDateOfManufacture, cmEthernetTrafficPortRemoteSfpLinkLength, cmEthernetTrafficPortRemoteSfpLaserWaveLength, cmEthernetTrafficPortRemoteSfpLaserFrequency, cmEthernetTrafficPortRemoteSfpMediaType, cmEthernetTrafficPortRemoteSfpConnectorValue, cmIngressPrioMapIndex, cmIngressPrioMapInPriority,cmIngressPrioMapCOS, cmEgressCOSIndex, cmEgressOuterTagCtrl, cmEgressCOS,cmEgressOuterTagPriority, cmElineFlowIndex,cmElineFlowCircuitName, cmElineFlowAdminState, cmElineFlowOperationalState, cmElineFlowSecondaryState,cmElineFlowFP1,cmElineFlowFP2, cmElineFlowStorageType,cmElineFlowRowStatus, cmFlowPointIndex,cmFlowPointCircuitName, cmFlowPointAdminState,cmFlowPointOperationalState, cmFlowPointSecondaryState,cmFlowPointAssociatedFlowId, cmFlowPointIngressMultiCOS,cmFlowPointIngressCOS, cmFlowPointIngressVlanMemberList,cmFlowPointVlanMemberAction, cmFlowPointAssociatedAclProfile,cmFlowPointSESFramesLossThresholdRatio, cmFlowPointVlanMemberActionVlan,cmFlowPointIngressUntaggedFrameEnabled, cmFlowPointCTagControl,cmFlowPointCTagVlanId, cmFlowPointCTagVlanPriority,cmFlowPointSTagControl, cmFlowPointSTagVlanId,cmFlowPointSTagVlanPriority, cmFlowPointEgressOuterTagPrioMapEnabled,cmFlowPointColorMarkingSupported, cmFlowPointStorageType, cmFlowPointRowStatus, cmQosPolicerV2Index,cmQosPolicerV2AdminState, cmQosPolicerV2OperationalState,cmQosPolicerV2SecondaryState, cmQosPolicerV2ColorMarkingEnabled,cmQosPolicerV2AssociatedProfile, cmQosPolicerV2StorageType,cmQosPolicerV2RowStatus, cmQosShaperV2Index, cmQosShaperV2AdminState, cmQosShaperV2OperationalState, cmQosShaperV2SecondaryState, cmQosShaperV2AssociatedQueueProfile, cmQosShaperV2CIRLo, cmQosShaperV2CIRHi, cmQosShaperV2EIRLo, cmQosShaperV2EIRHi,cmQosShaperV2IngressAverageFrameSize, cmQosShaperV2StorageType, cmQosShaperV2RowStatus, cmQosShaperV2AdditionalCIRLo, cmQosShaperV2AdditionalCIRHi, cmQosShaperV2ActualCIR, cmQosShaperV2ActualEIR, cmQosShaperV2WFQWeight, cmQosShaperV2LowLatencyControl, cmTrafficPortQosShaperIndex, cmTrafficPortQosShaperAdminState, cmTrafficPortQosShaperOperationalState, cmTrafficPortQosShaperSecondaryState, cmTrafficPortQosShaperAssociatedQueueProfile, cmTrafficPortQosShaperBufferSize, cmTrafficPortQosShaperCIRLo, cmTrafficPortQosShaperCIRHi, cmTrafficPortQosShaperEIRLo, cmTrafficPortQosShaperEIRHi, cmTrafficPortQosShaperStorageType, cmTrafficPortQosShaperRowStatus, cmTrafficPortQosShaperIngressAverageFrameSize, cmTrafficPortQosShaperAdditionalCIRLo, cmTrafficPortQosShaperAdditionalCIRHi, cmTrafficPortQosShaperWfqWeight, cmQosPolicerProfileIndex,cmQosPolicerProfileName, cmQosPolicerProfileCIRLo,cmQosPolicerProfileCIRHi, cmQosPolicerProfileEIRLo,cmQosPolicerProfileEIRHi, cmQosPolicerProfileCBS,cmQosPolicerProfileEBS, cmQosPolicerProfileColorMode, cmQosPolicerProfileCouplingFlag, cmQosPolicerProfileStorageType,cmQosPolicerProfileRowStatus, cmQosQueueProfileIndex,cmQosQueueProfileName, cmQosQueueProfileBufferSize,cmQosQueueProfileREDEnabled, cmQosQueueProfileStorageType,cmQosQueueProfileRowStatus, cmOAMFlowPointIndex,cmOAMFlowPointCircuitName, cmOAMFlowPointAdminState,cmOAMFlowPointOperationalState, cmOAMFlowPointSecondaryState,cmOAMFlowPointIngressVlanMemberList, cmOAMFlowPointVlanMemberAction,cmOAMFlowPointIngressUntaggedFrameSupported, cmOAMFlowPointSESFramesLossThresholdRatio, cmOAMFlowPointStorageType,cmOAMFlowPointRowStatus, cmTrafficAclRulesIndex, cmTrafficAclFilterAction, cmTrafficAclFilterType, cmTrafficAclEnabled, cmTrafficAclSrcMacAddr, cmTrafficAclSrcMacAddrEnabled, cmTrafficAclDstMacAddr, cmTrafficAclDstMacAddrEnabled, cmTrafficAclSrcIpFilterEnabled, cmTrafficAclDstIpFilterEnabled, cmTrafficAclSrcIpV4Addr, cmTrafficAclSrcIpV4AddrMask, cmTrafficAclDstIpV4Addr, cmTrafficAclDstIpV4AddrMask, cmTrafficAclSrcIpV6Addr, cmTrafficAclSrcIpV6AddrMask, cmTrafficAclDstIpV6Addr, cmTrafficAclDstIpV6AddrMask, cmTrafficAclTcpUdpSrcPortNum, cmTrafficAclTcpUdpSrcPortMask, cmTrafficAclTcpUdpSrcPortEnabled, cmTrafficAclTcpUdpDstPortNum, cmTrafficAclTcpUdpDstPortMask, cmTrafficAclTcpUdpDstPortEnabled, cmTrafficAclIpQosType, cmTrafficAclIpQosValue, cmTrafficAclIpQosTypeEnabled, cmTrafficAclVlanId , cmTrafficAclVlanIdEnabled, cmTrafficAclVlanPriority, cmTrafficAclVlanPriorityEnabled, cmTrafficAclProtocolType, cmTrafficAclProtocolTypeEnabled, cmTrafficAclStorageType, cmTrafficAclRowStatus, f3NetPortQosShaperIndex, f3NetPortQosShaperDirection, f3NetPortQosShaperAdminState, f3NetPortQosShaperOperationalState, f3NetPortQosShaperSecondaryState, f3NetPortQosShaperCIRLo, f3NetPortQosShaperCIRHi, f3NetPortQosShaperEIRLo, f3NetPortQosShaperEIRHi, f3NetPortQosShaperCBS, f3NetPortQosShaperEBS, f3NetPortQosShaperBufferSize, f3NetPortQosShaperCOS, f3NetPortQosShaperSoamCIRLo, f3NetPortQosShaperSoamCIRHi, f3NetPortQosShaperSoamEIRLo, f3NetPortQosShaperSoamEIRHi, f3Usb3GDCNPortIndex, f3Usb3GDCNPortIfIndex, f3Usb3GDCNPortEntityIndex, f3Usb3GDCNPortAdminState, f3Usb3GDCNPortOperationalState, f3Usb3GDCNPortSecondaryState, f3Usb3GDCNPortVendorName, f3Usb3GDCNPortModel, f3Usb3GDCNPortFSN, f3Usb3GDCNPortIMEI, f3Usb3GDCNPortHardwareVersion, f3Usb3GDCNPortFirmwareVersion, f3Usb3GDCNPortSIMStatus, f3Usb3GDCNPortPINLeftChances, f3Usb3GDCNPortPUKLeftChances, f3Usb3GDCNPortConnectionStatus, f3Usb3GDCNPortRSSI, f3Usb3GDCNPortSpeed, f3Usb3GDCNPortMTU, f3Usb3GDCNPortProviderName, f3Usb3GDCNPortDNS1, f3Usb3GDCNPortDNS2, f3Usb3GDCNPortAPN, f3Usb3GDCNPortUserName, f3Usb3GDCNPortPassword, f3Usb3GDCNPortDailNumber, f3Usb3GDCNPortRedialTimer, f3Usb3GDCNPortCurrentPinCode, f3Usb3GDCNPortNewPinCode, f3Usb3GDCNPortConfirmPinCode, f3Usb3GDCNPortCurrentPukCode, f3Usb3GDCNPINCodeAction, f3Usb3GDCNPortStorageType, f3Usb3GDCNPortRowStatus, f3Usb3GDCNPortIMSI, f3Usb3GDCNPortPINStatus, f3UsbDCNPortMobileNetworkType, f3Usb3GDCNMuxOperationalMode, f3Usb3GDCNPortIpAddress, f3Usb3GDCNPortNetMask, ocnStmIndex, ocnStmIfIndex, ocnStmEntityIndex, ocnStmAdminState, ocnStmOperationalState, ocnStmSecondaryState, ocnStmSfpVendorName, ocnStmSfpPartNumber, ocnStmSfpSerialNumber, ocnStmSfpDateOfManufacture, ocnStmSfpConnectorValue, ocnStmSfpLinkLength, ocnStmSfpLaserWaveLength, ocnStmSfpLaserWaveLengthPicometer, ocnStmSfpMediaType, ocnStmMultiplexingStructures, ocnStmEoTDMMode, ocnStmLoopbackConfig, ocnStmLoopbackStatus, ocnStmLoopbackTime, ocnStmInsertingAIS, ocnStmBerExcThreshold, ocnStmBerDegThreshold, ocnStmRxTrailTrace, ocnStmTxTrailTrace, ocnStmExpectedTrailTrace, ocnStmTrailTraceFormat, ocnStmQLModeEnabled, ocnStmExpectedQL, ocnStmAssumedQL, ocnStmReceivedQL, ocnStmTransmitQL, ocnStmSfpName, ocnStmSfpHardwareRevision, stsVcPathParentIfIndex, stsVcPathIndex, stsVcPathIfIndex, stsVcPathAdminState, stsVcPathOperationalState, stsVcPathSecondaryState, stsVcPathLoopbackConfig, stsVcPathLoopbackStatus, stsVcPathLoopbackTime, stsVcPathInsertingAIS, stsVcPathBerExcThreshold, stsVcPathBerDegThreshold, stsVcPathTrailTraceFormat, stsVcPathRxTrailTrace, stsVcPathTxTrailTrace, stsVcPathExpectedTrailTrace, stsVcPathRxSignalLabel, stsVcPathTxSignalLabel, stsVcPathExpectedSignalLabel, stsVcPathRowStatus, vtVcPathRowStatus, vtVcPathParentIfIndex, vtVcPathIndex, vtVcPathIfIndex, vtVcPathAdminState, vtVcPathOperationalState, vtVcPathSecondaryState, vtVcPathLoopbackConfig, vtVcPathLoopbackStatus, vtVcPathLoopbackTime, vtVcPathInsertingAIS, vtVcPathBerExcThreshold, vtVcPathBerDegThreshold, vtVcPathTrailTraceFormat, vtVcPathRxTrailTrace, vtVcPathTxTrailTrace, vtVcPathExpectedTrailTrace, vtVcPathRxSignalLabel, vtVcPathTxSignalLabel, vtVcPathExpectedSignalLabel, e1t1ParentIfIndex, e1t1Index, e1t1IfIndex, e1t1AdminState, e1t1OperationalState, e1t1SecondaryState, e1t1LoopbackConfig, e1t1LoopbackStatus, e1t1LoopbackTime, e1t1RemoteLoopbackRequest, e1t1InsertingAIS, e1t1RowStatus, e3t3ParentIfIndex, e3t3Index, e3t3IfIndex, e3t3EntityIndex, e3t3AdminState, e3t3OperationalState, e3t3SecondaryState, e3t3LoopbackConfig, e3t3LoopbackStatus, e3t3LoopbackTime, e3t3RemoteLoopbackRequest, e3t3InsertingAIS, e3t3CBitEnable, e3t3T3Channelized, e3t3RowStatus, cmEthernetTrafficPortTDMEncapsulation, cmEthernetTrafficPortRelatedVCG, bits8PortGroupIndex, bits8PortGroupIfIndex, bits8PortGroupAdminState, bits8PortGroupOperationalState, bits8PortGroupSecondaryState, bits8PortGroupLineType, bits8PortGroupLineCode, bits8PortGroupFrameFormat, bits8PortGroupSaBitDesignation, bits8PortGroupQLModeEnabled, bits8PortGroupTransmitQL, bits8PortGroupSquelchQL, bits8PortGroupLineBuildOut, bits8PortGroupImpedance, bits8PortGroupRowStatus, bits8PortGroupActivePorts, bits8PortGroupClkIfEnabledPorts, pps16PortGroupIndex,pps16PortGroupIfIndex,pps16PortGroupAdminState,pps16PortGroupOperationalState, pps16PortGroupSecondaryState,pps16PortGroupAlias,pps16PortGroupSquelchControl,pps16PortGroupTODSource, pps16PortGroupDirection, pps16PortGroupDelayCompensation,pps16PortGroupRowStatus, --pps16PortGroupOutputType clk16PortGroupIndex,clk16PortGroupIfIndex, clk16PortGroupAdminState, clk16PortGroupOperationalState, clk16PortGroupSecondaryState, clk16PortGroupAlias,clk16PortGroupDirection,clk16PortGroupSquelchControl, clk16PortGroupSquelchQL,clk16PortGroupRowStatus, todPps16PortGroupIndex,todPps16PortGroupIfIndex,todPps16PortGroupAdminState , todPps16PortGroupOperationalState, todPps16PortGroupSecondaryState,todPps16PortGroupAlias , todPps16PortGroupSquelchControl, todPps16PortGroupSquelchQL, todPps16PortGroupTODSource,todPps16PortGroupOutputFormat, todPps16PortGroupDelayCompensation,todPps16PortGroupRowStatus, -- f3IrigRs422OutputPortTable columns f3IrigRs422OutputPortIndex, f3IrigRs422OutputPortIfIndex, f3IrigRs422OutputPortEntityIndex, f3IrigRs422OutputPortAlias, f3IrigRs422OutputPortAdminState, f3IrigRs422OutputPortOperationalState, f3IrigRs422OutputPortSecondaryState, f3IrigRs422OutputPortTimeCode, f3IrigRs422OutputPortControlField, -- f3IrigOpticalOutputPortTable columns f3IrigOpticalOutputPortIndex, f3IrigOpticalOutputPortIfIndex, f3IrigOpticalOutputPortEntityIndex, f3IrigOpticalOutputPortAlias, f3IrigOpticalOutputPortAdminState, f3IrigOpticalOutputPortOperationalState, f3IrigOpticalOutputPortSecondaryState, f3IrigOpticalOutputPortTimeCode, f3IrigOpticalOutputPortControlField, -- f3IrigRelayOutputPortTable columns f3IrigRelayOutputPortIndex, f3IrigRelayOutputPortIfIndex, f3IrigRelayOutputPortEntityIndex, f3IrigRelayOutputPortAlias, f3IrigRelayOutputPortAdminState, f3IrigRelayOutputPortOperationalState, f3IrigRelayOutputPortSecondaryState, f3IrigRelayOutputPortRelayOperation, -- f3IrigOutputGroupTable columns f3IrigOutputGroupIndex, f3IrigOutputGroupIfIndex, f3IrigOutputGroupEntityIndex, f3IrigOutputGroupAlias, f3IrigOutputGroupExtensionType, f3IrigOutputGroupExtensionDetection, -- f3IrigOutputUnitPortTable columns f3IrigOutputUnitPortIndex, f3IrigOutputUnitPortIfIndex, f3IrigOutputUnitPortEntityIndex, f3IrigOutputUnitPortAlias, f3IrigOutputUnitPortAdminState, f3IrigOutputUnitPortOperationalState, f3IrigOutputUnitPortSecondaryState, f3IrigOutputUnitPortTimeCode, f3IrigOutputUnitPortControlField, f3IrigOutputUnitPortType, f3IrigOutputUnitPortDigitalVoltage, ccInputPortIndex, ccInputPortIfIndex, ccInputPortEntityIndex, ccInputPortAlias, ccInputPortAdminState, ccInputPortOperationalState, ccInputPortSecondaryState, ccGroupIndex, ccGroupIfIndex, ccGroupEntityIndex, ccGroupAlias, ccGroupActivePorts, ccGroupPhaseAdjust, ccGroupDutyCycle } STATUS deprecated DESCRIPTION "*********************THIS GROUP IS NOW DEPRECATED ********************* A collection of objects used to manage the CM Facility group." ::= { cmFacilityGroups 1 } ethernetAccessPortGroup OBJECT-GROUP OBJECTS { cmEthernetAccPortIndex, cmEthernetAccPortIfIndex, cmEthernetAccPortOperationalState, cmEthernetAccPortSecondaryState, cmEthernetAccPortMTU, cmEthernetAccPortMediaType, cmEthernetAccPortConfigSpeed, cmEthernetAccPortNegotiatedSpeed, cmEthernetAccPortMDIXType, cmEthernetAccPortJumboFramesEnabled, cmEthernetAccPortSfpVendorName, cmEthernetAccPortSfpPartNumber, cmEthernetAccPortSfpSerialNumber, cmEthernetAccPortSfpDateOfManufacture, cmEthernetAccPortSfpConnectorValue, cmEthernetAccPortInitiateDiag, cmEthernetAccPortDiagnosePair1Cond, cmEthernetAccPortDiagnosePair2Cond, cmEthernetAccPortDiagnosePair3Cond, cmEthernetAccPortDiagnosePair4Cond, cmEthernetAccPortDiagnoseAutoNegCond, cmEthernetAccPortDiagnoseLpbkCond, cmEthernetAccPortDiagnoseEfmLpbkCond, cmEthernetAccPortDiagnoseResult,cmEthernetAccPortDiagnoseTestStatus, cmEthernetAccPortDiagnoseTestTime, cmEthernetAccPortLoopbackConfig, cmEthernetAccPortLoopbackStatus, cmEthernetAccPortLoopbackTime, cmEthernetAccPortLoopbackSwapSADA, cmEthernetAccPortOuterVlanLoopbackMask, cmEthernetAccPortOuterVlanLoopback1, cmEthernetAccPortOuterVlanLoopback2, cmEthernetAccPortOuterVlanLoopback3, cmEthernetAccPortInnerVlanLoopbackMask, cmEthernetAccPortInnerVlanLoopback1, cmEthernetAccPortInnerVlanLoopback2, cmEthernetAccPortInnerVlanLoopback3, cmEthernetAccPortLinkLossFwdEnabled, cmEthernetAccPortLinkLossFwdSignalType, cmEthernetAccPortLinkLossFwdTriggerTypes, cmEthernetAccPortLinkLossFwdDelay, cmEthernetAccPortLinkLossFwdActive, cmEthernetAccPortLinkLossFwdPartnerEnabled, cmEthernetAccPortLinkLossFwdLocalLinkId, cmEthernetAccPortLinkLossFwdRemoteLinkIds, cmEthernetAccPortOamId, cmEthernetAccPortOamAdminDisposition, cmEthernetAccPortOamDiscoveryState, cmEthernetAccPortOamLocalVarRtrvsEnabled, cmEthernetAccPortOamLocalLinkEventsEnabled, cmEthernetAccPortOamLocalOamLoopbacksSupported, cmEthernetAccPortOamLocalUnidirSupportEnabled, cmEthernetAccPortOamLocalMaxPDUSize, cmEthernetAccPortOamLocalMode, cmEthernetAccPortOamRemoteMacAddress, cmEthernetAccPortOamRemoteVarRtrvsEnabled, cmEthernetAccPortOamRemoteLinkEventsEnabled, cmEthernetAccPortOamRemoteOamLoopbacksSupported, cmEthernetAccPortOamRemoteUnidirSupportEnabled, cmEthernetAccPortOamRemoteMaxPDUSize, cmEthernetAccPortOamRemoteMode, cmEthernetAccPortMode, cmEthernetAccPortSvcType, cmEthernetAccPortRxPauseDisposition, cmEthernetAccPortTxPauseEnabled, cmEthernetAccPortAfpType, cmEthernetAccPortMDIXStatus, cmEthernetAccPortSfpReach, cmEthernetAccPortSfpLaserWaveLength, cmEthernetAccPortSfpMediaType, cmEthernetAccPortOamEnabled, cmEthernetAccPortOamAdminState, cmEthernetAccPortShapingEnabled, cmEthernetAccPortShapedSpeedLo, cmEthernetAccPortShapedSpeedHi, cmEthernetAccPortQinQEtherType, cmEthernetAccPortRxPauseEnabled, cmEthernetAccPortAutoDiagEnabled, cmEthernetAccPortLinkLossFwdTxActionType, cmEthernetAccPortLinkLossFwdRxRLDLinkIds, cmEthernetAccPortN2AVlanTrunkingEnabled, cmEthernetAccPortA2NPushPVIDEnabled, cmEthernetAccPortN2APopPVIDEnabled, cmEthernetAccPortPortVlanId, cmEthernetAccPortPortVlanPriority, cmEthernetAccPortPrioMapMode, cmEthernetAccPortSyncEEnabled, cmEthernetAccPortQLModeEnabled, cmEthernetAccPortExpectedQL, cmEthernetAccPortAssumedQL, cmEthernetAccPortReceivedQL, cmEthernetAccPortTransmitQL,cmEthernetAccPortDeiEnable, cmEthernetAccPortPcpDEEncType,cmEthernetAccPortPcpDEPairsAction, cmEthernetAccPortClbIndex, cmEthernetAccPortClbEnabled, cmEthernetAccPortClbLength, cmEthernetAccPortClbDescr, cmEthernetAccPortSSMRemoteMacAddress, cmEthernetAccPortXgePhyType, cmEthernetAccPortLoopbackSourceMacControlEnabled, cmEthernetAccPortLoopbackDestMacControlEnabled, cmEthernetAccPortLoopbackSourceMacAddress, cmEthernetAccPortLoopbackDestMacAddress, cmEthernetAccPortLoopbackBlockingEnabled, cmEthernetAccPortRxDeiAction, cmEthernetAccPortTxDeiAction, cmEthernetAccPortRxDeiOuterTagType, cmEthernetAccPortTxDeiOuterTagType, cmEthernetAccPortLaserWDMChannel, cmEthernetAccPortLaserIsTunable, cmEthernetAccPortLaserFrequency, cmEthernetAccPortMediaTypeAutoSelected, cmEthernetAccPortLowLatencyQueuingEnabled, cmEthernetAccPortA2nSwapPriorityVIDEnabled, cmEthernetAccPortN2aSwapPriorityVIDEnabled, cmEthernetAccPortSwapPriorityVID, cmEthernetAccPortDiagnosticMacAddress, cmEthernetAccPortIngressCOSPriority, cmEthernetAccPortDefaultCOS, cmEthernetAccPortTrafficModel, cmEthernetAccPortIndependentShaperBW, cmEthernetAccPortJdsuLoopbackSrcIp, cmEthernetAccPortWfqSegmentationCOS, cmEthernetAccPortWfqGroupCOS, cmEthernetAccPortWfqGroupEirLo, cmEthernetAccPortWfqGroupEirHi, cmEthernetAccPortSilentStartControl, cmEthernetAccPortSfpLinkLength, cmEthernetAccPortOuterTagTpidOverride, cmEthernetAccPortOuterTagTpid, cmEthernetAccPortSfpName, cmEthernetAccPortSfpHardwareRevision, cmEthernetAccPortPersistentLoopbackControl, cmEthernetAccPortLoopbackTestReflectorIPv4AddressControl, cmEthernetAccPortLoopbackTestReflectorIPv4Address, cmEthernetAccPortLoopbackTestReflectorIPv6AddressControl, cmEthernetAccPortLoopbackTestReflectorIPv6Address, cmEthernetAccPortPowerdDeviceDetection, cmEthernetAccPortPoEStatus, cmEthernetAccPortSfpIdentifierValue } STATUS current DESCRIPTION "A collection of objects used to manage the F3 Ethernet Access Port function." ::= { cmFacilityGroups 2 } ethernetNetworkPortGroup OBJECT-GROUP OBJECTS { cmEthernetNetPortIndex, cmEthernetNetPortIfIndex, cmEthernetNetPortEntityIndex, cmEthernetNetPortAdminState, cmEthernetNetPortOperationalState, cmEthernetNetPortSecondaryState, cmEthernetNetPortMTU, cmEthernetNetPortMediaType, cmEthernetNetPortConfigSpeed, cmEthernetNetPortNegotiatedSpeed, cmEthernetNetPortMDIXType, cmEthernetNetPortJumboFramesEnabled, cmEthernetNetPortSfpVendorName, cmEthernetNetPortSfpPartNumber, cmEthernetNetPortSfpSerialNumber, cmEthernetNetPortSfpDateOfManufacture, cmEthernetNetPortSfpConnectorValue, cmEthernetNetPortInitiateDiag, cmEthernetNetPortDiagnosePair1Cond, cmEthernetNetPortDiagnosePair2Cond, cmEthernetNetPortDiagnosePair3Cond, cmEthernetNetPortDiagnosePair4Cond, cmEthernetNetPortDiagnoseAutoNegCond, cmEthernetNetPortDiagnoseLpbkCond, cmEthernetNetPortDiagnoseEfmLpbkCond, cmEthernetNetPortDiagnoseResult,cmEthernetNetPortDiagnoseTestStatus, cmEthernetNetPortDiagnoseTestTime, cmEthernetNetPortLoopbackConfig, cmEthernetNetPortLoopbackStatus, cmEthernetNetPortLoopbackTime, cmEthernetNetPortLoopbackSwapSADA, cmEthernetNetPortOuterVlanLoopbackMask, cmEthernetNetPortOuterVlanLoopback1, cmEthernetNetPortOuterVlanLoopback2, cmEthernetNetPortOuterVlanLoopback3, cmEthernetNetPortInnerVlanLoopbackMask, cmEthernetNetPortInnerVlanLoopback1, cmEthernetNetPortInnerVlanLoopback2, cmEthernetNetPortInnerVlanLoopback3, cmEthernetNetPortLinkLossFwdEnabled, cmEthernetNetPortLinkLossFwdSignalType, cmEthernetNetPortLinkLossFwdTriggerTypes,cmEthernetNetPortLinkLossFwdDelay, cmEthernetNetPortLinkLossFwdActive, cmEthernetNetPortLinkLossFwdPartnerEnabled, cmEthernetNetPortLinkLossFwdLocalLinkId, cmEthernetNetPortLinkLossFwdRemoteLinkIds, cmEthernetNetPortOamId, cmEthernetNetPortOamAdminDisposition, cmEthernetNetPortOamDiscoveryState, cmEthernetNetPortOamLocalVarRtrvsEnabled, cmEthernetNetPortOamLocalLinkEventsEnabled, cmEthernetNetPortOamLocalOamLoopbacksSupported, cmEthernetNetPortOamLocalUnidirSupportEnabled, cmEthernetNetPortOamLocalMaxPDUSize, cmEthernetNetPortOamLocalMode, cmEthernetNetPortOamRemoteMacAddress, cmEthernetNetPortOamRemoteVarRtrvsEnabled, cmEthernetNetPortOamRemoteLinkEventsEnabled, cmEthernetNetPortOamRemoteOamLoopbacksSupported, cmEthernetNetPortOamRemoteUnidirSupportEnabled, cmEthernetNetPortOamRemoteMaxPDUSize, cmEthernetNetPortOamRemoteMode, cmEthernetNetPortRxPauseDisposition, cmEthernetNetPortTxPauseEnabled, cmEthernetNetPortAfpType, cmEthernetNetPortMDIXStatus, cmEthernetNetPortSfpReach, cmEthernetNetPortSfpLaserWaveLength, cmEthernetNetPortSfpMediaType, cmEthernetNetPortOamEnabled, cmEthernetNetPortOamAdminState, cmEthernetNetPortShapingEnabled, cmEthernetNetPortShapedSpeedLo, cmEthernetNetPortShapedSpeedHi, cmEthernetNetPortQinQEtherType, cmEthernetNetPortLinkLossFwdTxActionType, cmEthernetNetPortLinkLossFwdRxRLDLinkIds, cmEthernetNetPortAutoDiagEnabled, cmEthernetNetPortSyncEEnabled, cmEthernetNetPortQLModeEnabled, cmEthernetNetPortExpectedQL, cmEthernetNetPortAssumedQL, cmEthernetNetPortReceivedQL, cmEthernetNetPortTransmitQL, cmEthernetNetPortDeiEnable, cmEthernetNetPortPcpDEEncType, cmEthernetNetPortPcpDEPairsAction,cmEthernetNetPortClbIndex, cmEthernetNetPortClbEnabled, cmEthernetNetPortClbLength, cmEthernetNetPortClbDescr, cmEthernetNetPortSSMRemoteMacAddress, cmEthernetNetPortXgePhyType, cmEthernetNetPortLoopbackSourceMacControlEnabled, cmEthernetNetPortLoopbackDestMacControlEnabled, cmEthernetNetPortLoopbackSourceMacAddress, cmEthernetNetPortLoopbackDestMacAddress, cmEthernetNetPortLoopbackBlockingEnabled, cmEthernetNetPortRxDeiAction, cmEthernetNetPortTxDeiAction, cmEthernetNetPortRxDeiOuterTagType, cmEthernetNetPortTxDeiOuterTagType, cmEthernetNetPortLaserWDMChannel, cmEthernetNetPortLaserIsTunable, cmEthernetNetPortLaserFrequency, cmEthernetNetPortMediaTypeAutoSelected, cmEthernetNetPortLowLatencyQueuingEnabled, cmEthernetNetPortDiagnosticMacAddress, cmEthernetNetPortIngressCOSPriority, cmEthernetNetPortDefaultCOS, cmEthernetNetPortTrafficModel, cmEthernetNetPortIndependentShaperBW, cmEthernetNetPortExpDEEncType, cmEthernetNetPortExpDEPairsAction, cmEthernetNetPortIpPrecDEEncType, cmEthernetNetPortIpPrecDEPairsAction, cmEthernetNetPortEncapPcpDEEncodingType, cmEthernetNetPortEncapPcpDEPairsAction, cmEthernetNetPortJdsuLoopbackSrcIp, cmEthernetNetPortWfqSegmentationCOS, cmEthernetNetPortWfqGroupCOS, cmEthernetNetPortWfqGroupEirLo, cmEthernetNetPortWfqGroupEirHi, cmEthernetNetPortSilentStartControl, cmEthernetNetPortSfpLinkLength, cmEthernetNetPortOuterTagTpidOverride, cmEthernetNetPortOuterTagTpid, cmEthernetNetPortSfpName, cmEthernetNetPortSfpHardwareRevision, cmEthernetNetPortPersistentLoopbackControl, cmEthernetNetPortLoopbackTestReflectorIPv4AddressControl, cmEthernetNetPortLoopbackTestReflectorIPv4Address, cmEthernetNetPortLoopbackTestReflectorIPv6AddressControl, cmEthernetNetPortLoopbackTestReflectorIPv6Address, cmEthernetNetPortSfpIdentifierValue } STATUS current DESCRIPTION " A collection of objects used to manage the F3 Ethernet Network Port function." ::= { cmFacilityGroups 3 } ethernetMgmtPortGroup OBJECT-GROUP OBJECTS { cmEthernetMgmtPortIndex, cmEthernetMgmtPortEntityIndex, cmEthernetMgmtPortAdminState, cmEthernetMgmtPortOperationalState, cmEthernetMgmtPortSecondaryState, cmEthernetMgmtPortMTU, cmEthernetMgmtPortConfigSpeed, cmEthernetMgmtPortNegotiatedSpeed, cmEthernetMgmtPortMDIXType, cmEthernetMgmtPortMDIXStatus, cmEthernetMgmtPortMediaType } STATUS current DESCRIPTION "A collection of objects used to manage the F3 Ethernet Management Port function." ::= { cmFacilityGroups 4 } bitsPortGroup OBJECT-GROUP OBJECTS { bitsPortTypeIndex, bitsPortIndex, bitsPortIfIndex, bitsPortEntityIndex, bitsPortAdminState, bitsPortOperationalState, bitsPortSecondaryState, bitsPortType, bitsPortLineType, bitsPortLineCode, bitsPortFrameFormat, bitsPortSaBitDesignation, bitsPortQLModeEnabled, bitsPortExpectedQL, bitsPortAssumedQL, bitsPortReceivedQL, bitsPortTransmitQL, bitsPortSquelchQL, bitsPortLineBuildOut } STATUS current DESCRIPTION "A collection of objects used to manage the F3 Bits Port function." ::= { cmFacilityGroups 5 } trafficGroup OBJECT-GROUP OBJECTS { cmFlowIndex, cmFlowCircuitName, cmFlowAdminState, cmFlowOperationalState, cmFlowSecondaryState, cmFlowType, cmFlowMultiCOS, cmFlowA2NCIR, cmFlowA2NEIR, cmFlowN2ARateLimitingEnabled, cmFlowN2ACIR, cmFlowN2AEIR, cmFlowStorageType, cmFlowRowStatus, cmFlowTrafficType, cmFlowCOS, cmFlowVlanMemberList, cmFlowAction, cmFlowActionVlan, cmFlowUntaggedMemberEnabled, cmFlowA2NCIRHi, cmFlowA2NEIRHi, cmFlowN2ACIRHi, cmFlowN2AEIRHi, cmFlowHCOSMgmtEnabled, cmFlowGuaranteedA2NBandwidthLo, cmFlowGuaranteedA2NBandwidthHi, cmFlowMaximumA2NBandwidthLo, cmFlowMaximumA2NBandwidthHi, cmFlowCTagControl, cmFlowCTagVlanId, cmFlowCTagVlanPriority, cmFlowCTagMatchRxPrio, cmFlowSTagControl, cmFlowSTagVlanId, cmFlowSTagVlanPriority, cmFlowOuterTagPrioEnabled, cmFlowN2ACOSPriorityTagType, cmFlowESFramesLossThreshold, cmFlowSESFramesLossThresholdRatio, cmFlowPolicingEnabled, cmFlowPreserveSTagProperties, cmFlowInnerTagPrioEnabled, cmFlowA2NShapingType, cmFlowN2AShapingType, cmFlowN2AOuterTagPrioEnabled, cmFlowSTagMatchRxPrio, cmFlowAutoBandwidthConfigEnabled, cmFlowPort1, cmFlowPort2, cmFlowPolicingControl, cmFlowAutoCIRPercentage, cmFlowLoopAvoidanceObject, cmFlowConfigType, cmFlowN2NForwardingEnabled, cmFlowA2NMulticastRateLimitControl, cmFlowA2NMulticastRateLimitLo, cmFlowA2NMulticastRateLimitHi, cmFlowA2NBroadcastRateLimitControl, cmFlowA2NBroadcastRateLimitLo, cmFlowA2NBroadcastRateLimitHi, cmFlowA2NCombinedRateLimitControl, cmFlowA2NCombinedRateLimitLo, cmFlowA2NCombinedRateLimitHi, cmFlowRefPrioMapProfile, cmFlowRefEoMplsPwObject, cmFlowRefN2APrioMapProfile, cmFlowSecureBlockingEnabled, cmFlowRefConnectGuardFlowList, cmFlowSecureStateList, cmFlowIndependentA2NShaperBW, cmFlowWfqSegmentationCOS, cmFlowWfqGroupCOS, cmFlowWfqGroupEirLo, cmFlowWfqGroupEirHi, cmQosShaperTypeIndex, cmQosShaperIndex, cmQosShaperDirection, cmQosShaperAdminState, cmQosShaperOperationalState,cmQosShaperSecondaryState, cmQosShaperCIR, cmQosShaperCBS, cmQosShaperEIR, cmQosShaperEBS, cmQosShaperBufferSize, cmQosShaperStorageType, cmQosShaperRowStatus, cmQosShaperSoamCIRLo, cmQosShaperSoamCIRHi, cmQosShaperSoamEIRLo, cmQosShaperSoamEIRHi, cmQosShaperWredGreenMinQueueThreshold, cmQosShaperWredGreenMaxQueueThreshold, cmQosShaperWredGreenDropProbability, cmQosShaperWredYellowMinQueueThreshold, cmQosShaperWredYellowMaxQueueThreshold, cmQosShaperWredYellowDropProbability, cmQosShaperAvgFrameSizeBeforeFragment, cmQosShaperWfqWeight, cmQosShaperCOS, cmQosShaperCIRHi, cmQosShaperEIRHi, cmQosFlowPolicerTypeIndex, cmQosFlowPolicerIndex, cmQosFlowPolicerDirection, cmQosFlowPolicerAdminState, cmQosFlowPolicerOperationalState, cmQosFlowPolicerSecondaryState, cmQosFlowPolicerCIRLo, cmQosFlowPolicerCIRHi, cmQosFlowPolicerEIRLo, cmQosFlowPolicerEIRHi, cmQosFlowPolicerCBS, cmQosFlowPolicerEBS, cmQosFlowPolicerAlgorithm, cmQosFlowPolicerColorMode, cmQosFlowPolicerColorMarkingFlag, cmQosFlowPolicerCouplingFlag, cmQosFlowPolicerAssociatedShaper, cmQosFlowPolicerStorageType, cmQosFlowPolicerRowStatus, cmQosFlowPolicerCIRMaxHi, cmQosFlowPolicerCIRMaxLo, cmQosFlowPolicerEIRMaxHi, cmQosFlowPolicerEIRMaxLo, cmQosFlowPolicerEnvelopeObject, cmQosFlowPolicerRank, cmQosFlowPolicerPolicingEnabled, cmAccPortQosShaperIndex, cmAccPortQosShaperDirection, cmAccPortQosShaperAdminState, cmAccPortQosShaperOperationalState, cmAccPortQosShaperSecondaryState, cmAccPortQosShaperCIRLo, cmAccPortQosShaperCIRHi, cmAccPortQosShaperEIRLo, cmAccPortQosShaperEIRHi, cmAccPortQosShaperCBS, cmAccPortQosShaperEBS, cmAccPortQosShaperBufferSize, cmAccPortQosShaperCOS, cmAccPortQosShaperSoamCIRLo, cmAccPortQosShaperSoamCIRHi, cmAccPortQosShaperSoamEIRLo, cmAccPortQosShaperSoamEIRHi, cmAccPortQosShaperWredGreenMinQueueThreshold, cmAccPortQosShaperWredGreenMaxQueueThreshold, cmAccPortQosShaperWredGreenDropProbability, cmAccPortQosShaperWredYellowMinQueueThreshold, cmAccPortQosShaperWredYellowMaxQueueThreshold, cmAccPortQosShaperWredYellowDropProbability, cmAccPortQosShaperAvgFrameSizeBeforeFragment, cmAccPortQosShaperWfqWeight, f3NetPortQosShaperIndex, f3NetPortQosShaperDirection, f3NetPortQosShaperAdminState, f3NetPortQosShaperOperationalState, f3NetPortQosShaperSecondaryState, f3NetPortQosShaperCIRLo, f3NetPortQosShaperCIRHi, f3NetPortQosShaperEIRLo, f3NetPortQosShaperEIRHi, f3NetPortQosShaperCBS, f3NetPortQosShaperEBS, f3NetPortQosShaperBufferSize, f3NetPortQosShaperCOS, f3NetPortQosShaperSoamCIRLo, f3NetPortQosShaperSoamCIRHi, f3NetPortQosShaperSoamEIRLo, f3NetPortQosShaperSoamEIRHi, f3NetPortQosShaperWredGreenMinQueueThreshold, f3NetPortQosShaperWredGreenMaxQueueThreshold, f3NetPortQosShaperWredGreenDropProbability, f3NetPortQosShaperWredYellowMinQueueThreshold, f3NetPortQosShaperWredYellowMaxQueueThreshold, f3NetPortQosShaperWredYellowDropProbability, f3NetPortQosShaperAvgFrameSizeBeforeFragment, f3NetPortQosShaperWfqWeight } STATUS current DESCRIPTION "A collection of objects used to manage the F3 traffic path, consists of Flows, Policers and Shapers." ::= { cmFacilityGroups 6 } prioMapGroup OBJECT-GROUP OBJECTS { cmPrioMapIndex, cmPrioMapInPriority, cmPrioMapXTagControl, cmPrioMapXTagPriority, cmPrioMapCOS, cmPrioMapOuterTagPriority, cmPrioMapInnerTagPriority, cmNetPortPrioMapIndex, cmNetPortPrioMapInPriority, cmNetPortPrioMapCOS, cmNetPortPrioMapOuterTagPriority } STATUS current DESCRIPTION "A collection of objects used to manage the F3 Priority Mapping function." ::= { cmFacilityGroups 7 } pcpEncodeGroup OBJECT-GROUP OBJECTS { cmAccPortPcpDEEncIndex, cmAccPortPcpDEEncInPriority, cmAccPortPcpDEEncDropIneligiblePrio, cmAccPortPcpDEEncDropEligiblePrio, cmAccPortPcpDEDecIndex, cmAccPortPcpDEDecInPriority, cmAccPortPcpDEDecOutPriority, cmAccPortPcpDEDecDropEligible, cmAccPortPcpDEPairIndex, cmAccPortPcpDEDropIneligiblePrio, cmAccPortPcpDEDropEligiblePrio, cmNetPortPcpDEEncIndex, cmNetPortPcpDEEncInPriority, cmNetPortPcpDEEncDropIneligiblePrio, cmNetPortPcpDEEncDropEligiblePrio, cmNetPortPcpDEDecIndex, cmNetPortPcpDEDecInPriority, cmNetPortPcpDEDecOutPriority, cmNetPortPcpDEDecDropEligible, cmNetPortPcpDEPairIndex, cmNetPortPcpDEDropIneligiblePrio, cmNetPortPcpDEDropEligiblePrio } STATUS current DESCRIPTION "A collection of objects used to manage the F3 Priority Mapping function." ::= { cmFacilityGroups 8 } cpdV2Group OBJECT-GROUP OBJECTS { cmEthernetAccPortCpdV2Index, cmEthernetAccPortCpdV2CiscoGroupDispType, cmEthernetAccPortCpdV2IslDispType, cmEthernetAccPortCpdV2PagpDispType, cmEthernetAccPortCpdV2UdldDispType, cmEthernetAccPortCpdV2CdpDispType, cmEthernetAccPortCpdV2VtpDispType, cmEthernetAccPortCpdV2DtpDispType, cmEthernetAccPortCpdV2PvstpPlusDispType, cmEthernetAccPortCpdV2UplinkFastDispType, cmEthernetAccPortCpdV2VlanBridgeDispType, cmEthernetAccPortCpdV2L2PTDispType, cmEthernetAccPortCpdV2BridgeGroupDispType, cmEthernetAccPortCpdV2BPDUDispType, cmEthernetAccPortCpdV2PauseDispType, cmEthernetAccPortCpdV2LACPDispType, cmEthernetAccPortCpdV2LACPMarkerDispType, cmEthernetAccPortCpdV2EfmOamDispType, cmEthernetAccPortCpdV2SSMDispType, cmEthernetAccPortCpdV2PortAuthenDispType, cmEthernetAccPortCpdV2BridgeReservedDispType, cmEthernetAccPortCpdV2LANBridgesDispType, cmEthernetAccPortCpdV2GARPGroupDispType, cmEthernetAccPortCpdV2GMRPDispType, cmEthernetAccPortCpdV2GVRPDispType, cmEthernetAccPortCpdV2GARPDispType, cmEthernetAccPortCpdV2Mac00DispType, cmEthernetAccPortCpdV2Mac01DispType, cmEthernetAccPortCpdV2Mac02DispType, cmEthernetAccPortCpdV2Mac03DispType, cmEthernetAccPortCpdV2Mac04DispType, cmEthernetAccPortCpdV2Mac05DispType, cmEthernetAccPortCpdV2Mac06DispType, cmEthernetAccPortCpdV2Mac07DispType, cmEthernetAccPortCpdV2Mac08DispType, cmEthernetAccPortCpdV2Mac09DispType, cmEthernetAccPortCpdV2Mac0ADispType, cmEthernetAccPortCpdV2Mac0BDispType, cmEthernetAccPortCpdV2Mac0CDispType, cmEthernetAccPortCpdV2Mac0DDispType, cmEthernetAccPortCpdV2Mac0EDispType, cmEthernetAccPortCpdV2Mac0FDispType, cmEthernetAccPortCpdV2NearestLLDPDispType, cmEthernetAccPortCpdV2NonTpmrLLDPDispType, cmEthernetAccPortCpdV2CustomerLLDPDispType, cmEthernetAccPortCpdV2PtpUntaggedDispType, cmEthernetAccPortCpdV2PtpTaggedDispType, cmFlowCpdV2Index, cmFlowCpdV2CiscoGroupDispType, cmFlowCpdV2IslDispType, cmFlowCpdV2PagpDispType, cmFlowCpdV2UdldDispType, cmFlowCpdV2CdpDispType, cmFlowCpdV2VtpDispType, cmFlowCpdV2DtpDispType, cmFlowCpdV2PvstpPlusDispType, cmFlowCpdV2UplinkFastDispType, cmFlowCpdV2VlanBridgeDispType, cmFlowCpdV2L2PTDispType, cmFlowCpdV2BridgeGroupDispType, cmFlowCpdV2BPDUDispType, cmFlowCpdV2PauseDispType, cmFlowCpdV2LACPDispType, cmFlowCpdV2LACPMarkerDispType, cmFlowCpdV2EfmOamDispType, cmFlowCpdV2SSMDispType, cmFlowCpdV2PortAuthenDispType, cmFlowCpdV2BridgeReservedDispType, cmFlowCpdV2LANBridgesDispType, cmFlowCpdV2GARPGroupDispType, cmFlowCpdV2GMRPDispType, cmFlowCpdV2GVRPDispType, cmFlowCpdV2GARPDispType, cmFlowCpdV2ActiveControlProtocols, cmFlowCpdV2Mac00DispType, cmFlowCpdV2Mac01DispType, cmFlowCpdV2Mac02DispType, cmFlowCpdV2Mac03DispType, cmFlowCpdV2Mac04DispType, cmFlowCpdV2Mac05DispType, cmFlowCpdV2Mac06DispType, cmFlowCpdV2Mac07DispType, cmFlowCpdV2Mac08DispType, cmFlowCpdV2Mac09DispType, cmFlowCpdV2Mac0ADispType, cmFlowCpdV2Mac0BDispType, cmFlowCpdV2Mac0CDispType, cmFlowCpdV2Mac0DDispType, cmFlowCpdV2Mac0EDispType, cmFlowCpdV2Mac0FDispType, cmFlowCpdV2NearestLLDPDispType, cmFlowCpdV2NonTpmrLLDPDispType, cmFlowCpdV2CustomerLLDPDispType, cmEthernetNetPortCpdV2Index, cmEthernetNetPortCpdV2CiscoGroupDispType, cmEthernetNetPortCpdV2IslDispType, cmEthernetNetPortCpdV2PagpDispType, cmEthernetNetPortCpdV2UdldDispType, cmEthernetNetPortCpdV2CdpDispType, cmEthernetNetPortCpdV2VtpDispType, cmEthernetNetPortCpdV2DtpDispType, cmEthernetNetPortCpdV2PvstpPlusDispType, cmEthernetNetPortCpdV2UplinkFastDispType, cmEthernetNetPortCpdV2VlanBridgeDispType, cmEthernetNetPortCpdV2L2PTDispType, cmEthernetNetPortCpdV2BridgeGroupDispType, cmEthernetNetPortCpdV2BPDUDispType, cmEthernetNetPortCpdV2PauseDispType, cmEthernetNetPortCpdV2LACPDispType, cmEthernetNetPortCpdV2LACPMarkerDispType, cmEthernetNetPortCpdV2EfmOamDispType, cmEthernetNetPortCpdV2SSMDispType, cmEthernetNetPortCpdV2PortAuthenDispType, cmEthernetNetPortCpdV2BridgeReservedDispType, cmEthernetNetPortCpdV2LANBridgesDispType, cmEthernetNetPortCpdV2GARPGroupDispType, cmEthernetNetPortCpdV2GMRPDispType, cmEthernetNetPortCpdV2GVRPDispType, cmEthernetNetPortCpdV2GARPDispType, cmEthernetNetPortCpdV2Mac00DispType, cmEthernetNetPortCpdV2Mac01DispType, cmEthernetNetPortCpdV2Mac02DispType, cmEthernetNetPortCpdV2Mac03DispType, cmEthernetNetPortCpdV2Mac04DispType, cmEthernetNetPortCpdV2Mac05DispType, cmEthernetNetPortCpdV2Mac06DispType, cmEthernetNetPortCpdV2Mac07DispType, cmEthernetNetPortCpdV2Mac08DispType, cmEthernetNetPortCpdV2Mac09DispType, cmEthernetNetPortCpdV2Mac0ADispType, cmEthernetNetPortCpdV2Mac0BDispType, cmEthernetNetPortCpdV2Mac0CDispType, cmEthernetNetPortCpdV2Mac0DDispType, cmEthernetNetPortCpdV2Mac0EDispType, cmEthernetNetPortCpdV2Mac0FDispType, cmEthernetNetPortCpdV2NearestLLDPDispType, cmEthernetNetPortCpdV2NonTpmrLLDPDispType, cmEthernetNetPortCpdV2CustomerLLDPDispType, cmEthernetNetPortCpdV2PtpUntaggedDispType, cmEthernetNetPortCpdV2PtpTaggedDispType } STATUS current DESCRIPTION "A collection of objects used to manage the Control Protocol Disposition version 2 function." ::= { cmFacilityGroups 9 } trafficGroupCmHub OBJECT-GROUP OBJECTS { cmFlowIndex, cmFlowCircuitName, cmFlowAdminState, cmFlowOperationalState, cmFlowSecondaryState, cmFlowType, cmFlowMultiCOS, cmFlowA2NCIR, cmFlowA2NEIR, cmFlowN2ARateLimitingEnabled, cmFlowN2ACIR, cmFlowN2AEIR, cmFlowStorageType, cmFlowRowStatus, cmFlowTrafficType, cmFlowCOS, cmFlowVlanMemberList, cmFlowAction, cmFlowActionVlan, cmFlowUntaggedMemberEnabled, cmFlowA2NCIRHi, cmFlowA2NEIRHi, cmFlowN2ACIRHi, cmFlowN2AEIRHi, cmFlowHCOSMgmtEnabled, cmFlowGuaranteedA2NBandwidthLo, cmFlowGuaranteedA2NBandwidthHi, cmFlowMaximumA2NBandwidthLo, cmFlowMaximumA2NBandwidthHi, cmFlowCTagControl, cmFlowCTagVlanId, cmFlowCTagVlanPriority, cmFlowCTagMatchRxPrio, cmFlowSTagControl, cmFlowSTagVlanId, cmFlowSTagVlanPriority, cmFlowOuterTagPrioEnabled, cmFlowN2ACOSPriorityTagType, cmFlowESFramesLossThreshold, cmFlowSESFramesLossThresholdRatio, cmFlowPolicingEnabled, cmFlowPreserveSTagProperties, cmFlowInnerTagPrioEnabled, cmFlowA2NShapingType, cmFlowN2AShapingType, cmFlowN2AOuterTagPrioEnabled, cmFlowSTagMatchRxPrio, cmQosShaperTypeIndex, cmQosShaperIndex, cmQosShaperDirection, cmQosShaperAdminState, cmQosShaperOperationalState,cmQosShaperSecondaryState, cmQosShaperCIR, cmQosShaperCBS, cmQosShaperEIR, cmQosShaperEBS, cmQosShaperBufferSize, cmQosShaperStorageType, cmQosShaperRowStatus, cmQosShaperCOS, cmQosShaperCIRHi, cmQosShaperEIRHi } STATUS current DESCRIPTION "A collection of objects used to manage the F3 traffic path, consists of Flows, Policers and Shapers." ::= { cmFacilityGroups 10 } ocnStmGroup OBJECT-GROUP OBJECTS { ocnStmIndex, ocnStmIfIndex, ocnStmEntityIndex, ocnStmAdminState, ocnStmOperationalState, ocnStmSecondaryState, ocnStmSfpVendorName, ocnStmSfpPartNumber, ocnStmSfpSerialNumber, ocnStmSfpDateOfManufacture, ocnStmMultiplexingStructures, ocnStmEoTDMMode, ocnStmLoopbackConfig, ocnStmLoopbackStatus, ocnStmLoopbackTime, ocnStmInsertingAIS, ocnStmBerExcThreshold, ocnStmBerDegThreshold, ocnStmRxTrailTrace, ocnStmTxTrailTrace, ocnStmExpectedTrailTrace, ocnStmTrailTraceFormat, ocnStmQLModeEnabled, ocnStmExpectedQL, ocnStmAssumedQL, ocnStmReceivedQL, ocnStmTransmitQL, ocnStmPortType, ocnStmFreqSourceType, ocnStmSfpName, ocnStmSfpHardwareRevision } STATUS current DESCRIPTION "A collection of objects used to manage the OCN/STM Line." ::= { cmFacilityGroups 11 } stsVcPathGroup OBJECT-GROUP OBJECTS { stsVcPathParentIfIndex, stsVcPathIndex, stsVcPathIfIndex, stsVcPathAdminState, stsVcPathOperationalState, stsVcPathSecondaryState, stsVcPathLoopbackConfig, stsVcPathLoopbackStatus, stsVcPathLoopbackTime, stsVcPathInsertingAIS, stsVcPathBerExcThreshold, stsVcPathBerDegThreshold, stsVcPathTrailTraceFormat, stsVcPathRxTrailTrace, stsVcPathTxTrailTrace, stsVcPathExpectedTrailTrace, stsVcPathRxSignalLabel, stsVcPathTxSignalLabel, stsVcPathExpectedSignalLabel, stsVcPathRowStatus, stsVcPathLowOrderPathType } STATUS current DESCRIPTION "A collection of objects used to manage the STS/VC Higher Order Path." ::= { cmFacilityGroups 12 } vtVcPathGroup OBJECT-GROUP OBJECTS { vtVcPathParentIfIndex, vtVcPathIndex, vtVcPathIfIndex, vtVcPathAdminState, vtVcPathOperationalState, vtVcPathSecondaryState, vtVcPathLoopbackConfig, vtVcPathLoopbackStatus, vtVcPathLoopbackTime, vtVcPathInsertingAIS, vtVcPathBerExcThreshold, vtVcPathBerDegThreshold, vtVcPathTrailTraceFormat, vtVcPathRxTrailTrace, vtVcPathTxTrailTrace, vtVcPathExpectedTrailTrace, vtVcPathRxSignalLabel, vtVcPathTxSignalLabel, vtVcPathExpectedSignalLabel, vtVcPathRowStatus } STATUS current DESCRIPTION "A collection of objects used to manage the VT/VC Lower Order Path." ::= { cmFacilityGroups 13 } e1t1InterfaceGroup OBJECT-GROUP OBJECTS { e1t1ParentIfIndex, e1t1Index, e1t1IfIndex, e1t1EntityIndex, e1t1AdminState, e1t1OperationalState, e1t1SecondaryState, e1t1LoopbackConfig, e1t1LoopbackStatus, e1t1LoopbackTime, e1t1RemoteLoopbackRequest, e1t1InsertingAIS, e1t1RowStatus, e1t1LineType, e1t1LineCode, e1t1FrameFormat, e1t1LineBuildOut, e1t1TimingDomain, e1t1RcvSensitivity, e1t1IdlePatternProfile, e1t1LoopbackProfile, e1t1RelatedContainerId, e1t1PatternLpbkControl } STATUS current DESCRIPTION "A collection of objects used to manage the E1/T1 Interface Group." ::= { cmFacilityGroups 14 } e3t3InterfaceGroup OBJECT-GROUP OBJECTS { e3t3ParentIfIndex, e3t3Index, e3t3IfIndex, e3t3EntityIndex, e3t3AdminState, e3t3OperationalState, e3t3SecondaryState, e3t3LoopbackConfig, e3t3LoopbackStatus, e3t3LoopbackTime, e3t3RemoteLoopbackRequest, e3t3InsertingAIS, e3t3CBitEnable, e3t3T3Channelized, e3t3RowStatus, e3t3FrameFormat, e3t3RelatedContainerId } STATUS current DESCRIPTION "A collection of objects used to manage the E3/T3 Interface Group." ::= { cmFacilityGroups 15 } f3PulsePerSecondPortGroup OBJECT-GROUP OBJECTS { f3PulsePerSecondPortIndex, f3PulsePerSecondPortIfIndex, f3PulsePerSecondPortEntityIndex, f3PulsePerSecondPortAdminState, f3PulsePerSecondPortOperationalState, f3PulsePerSecondPortSecondaryState, f3PulsePerSecondPortSquelchControl, f3PulsePerSecondPortSquelchQL, f3PulsePerSecondPortTODSource, f3PulsePerSecondPortDirection, f3PulsePerSecondPortInputRate, f3PulsePerSecondPortDelayCompensation, f3PulsePerSecondPortClockClass, f3PulsePerSecondPortClockAccuracy, f3PulsePerSecondPortTimeSource, f3PulsePerSecondPortPhyInterfaceType, f3PulsePerSecondPortOutputDelay, f3PulsePerSecondPortWidth, f3PulsePerSecondPortPolarity, f3PulsePerSecondPortImpedance, f3PulsePerSecondPortAlias, f3PulsePerSecondPortAssumedClockClass } STATUS current DESCRIPTION "A collection of objects used to manage the F3 Pulse Per Second Group." ::= { cmFacilityGroups 16 } f3TimeOfDayPortGroup OBJECT-GROUP OBJECTS { f3TimeOfDayPortIndex, f3TimeOfDayPortIfIndex, f3TimeOfDayPortEntityIndex, f3TimeOfDayPortAdminState, f3TimeOfDayPortOperationalState, f3TimeOfDayPortSecondaryState, f3TimeOfDayPortSquelchControl, f3TimeOfDayPortSquelchQL, f3TimeOfDayPortTODSource, f3TimeOfDayPortOutputFormat, f3TimeOfDayPortSignalDirection, f3TimeOfDayPortInputRate, f3TimeOfDayPortDelayCompensation, f3TimeOfDayPortAlias,f3TimeOfDayPortAssumedClockClass } STATUS current DESCRIPTION "A collection of objects used to manage the F3 Time of Day Port Group." ::= { cmFacilityGroups 17 } f3Gps10MhzPortGroup OBJECT-GROUP OBJECTS { gps10MHzPortIndex, gps10MHzPortIfIndex, gps10MHzPortEntityIndex, gps10MHzPortAdminState, gps10MHzPortOperationalState, gps10MHzPortSecondaryState, gps10MHzPortSignalDirection, gps10MHzPortSquelchControl, gps10MHzPortSquelchQL, gps10MHzPortFrequencySource, gps10MHzPortClockClass, gps10MHzPortClockAccuracy, gps10MHzPortTimeSource, gps10MHzPortAssumedQL,gps10MHzPortAlias, gps10MHzPortInputSignalType } STATUS current DESCRIPTION "A collection of objects used to manage the F3 GPS 10 Mhz Port Group." ::= { cmFacilityGroups 18 } ethernetNetworkPortExtGroup OBJECT-GROUP OBJECTS { cmEthernetNetPortTDMEncapsulation, cmEthernetNetPortAssociatedTdmEntity, cmEthernetNetPortInsertingAIS } STATUS current DESCRIPTION " A collection of objects used to manage the F3 Ethernet Network Port extense function." ::= { cmFacilityGroups 19 } f3GPSReceiverPortGroup OBJECT-GROUP OBJECTS { f3GPSReceiverPortIndex, f3GPSReceiverPortIfIndex, f3GPSReceiverPortEntityIndex, f3GPSReceiverPortAdminState, f3GPSReceiverPortOperationalState, f3GPSReceiverPortSecondaryState, f3GPSReceiverPortPPSGenCondition, f3GPSReceiverPortAntennaCableLength, f3GPSReceiverPortAntennaStatus, f3GPSReceiverPortSatellitesUsableFlag, f3GPSReceiverPortNumTrackingSatellites, f3GPSReceiverPortSelfSurveyProgress, f3GPSReceiverPortPPSGeneratedFlag, f3GPSReceiverPortGnssSystem, f3GPSReceiverPortInstallationType, f3GPSReceiverPortGnssTOD, f3GPSReceiverPortGnssSystemsBitMap, f3GPSReceiverPortAlias, f3GPSReceiverPortAntennaDelayValue, f3GPSReceiverPortAntennaDelayType, f3GPSReceiverPortCNOMask, f3GPSReceiverPortElevationMask, f3GPSReceiverPortCoordinateLatitude, f3GPSReceiverPortCoordinateLongitude, f3GPSReceiverPortCoordinateAltitude, f3GPSReceiverPortFirmwareUpgradePercent, f3GPSReceiverPortPDOPMask, f3GPSReceiverPortSelfSurveyPeriod, f3GPSReceiverPortSatMin1Threshold, f3GPSReceiverPortSatMin2Threshold, f3GPSReceiverPortPDOP, f3GPSReceiverPortSelfSurveyControl, f3GPSReceiverPortCoordinateStringAltitude, f3GPSReceiverPortLocationMode, f3GPSReceiverPortTimeAdvanceMode, f3GPSReceiverPortTimeAdvanceValue, f3GPSReceiverPortForcedAntennaConnected, f3GPSReceiverPortServiceAvailableTime, f3GPSReceiverPortServiceUnavailableTime, f3GPSReceiverPortServiceAvailablePercentage, f3GPSReceiverPortAGC, f3GPSReceiverPortSelfSurveyPositionAccuracy, f3GPSReceiverPortHorizontalAccuracy, f3GPSReceiverPortVerticalAccuracy, f3GPSReceiverPortTDOP, f3GPSReceiverPortHDOP, f3GPSReceiverPortVDOP, f3GPSReceiverPortFailureSuspendTime } STATUS current DESCRIPTION "A collection of objects used to manage the F3 GPS Receiver Port Group." ::= { cmFacilityGroups 20 } cmPsePortGroup OBJECT-GROUP OBJECTS{ cmPethPsePortExtGroupIndex, cmPethPsePortExtIndex, cmPethPsePortExtAssociatedPort, pethPsePortExtPowerConsumption, pethPsePortExtAvailablePowerLevel } STATUS current DESCRIPTION "A collection of objects used to manage the pse port ext entry Group." ::= { cmFacilityGroups 21 } cmPseEXTGroup OBJECT-GROUP OBJECTS{ pethMainPseExtGroupIndex, pethMainPseExtNonStandardPD } STATUS current DESCRIPTION "A collection of objects used to manage the pse group ext entry Group." ::= { cmFacilityGroups 22 } cmMPFlowGroup OBJECT-GROUP OBJECTS{ cmMPFlowIndex, cmMPFlowCircuitName, cmMPFlowAdminState, cmMPFlowOperationalState, cmMPFlowSecondaryState, cmMPFlowLearningEnabled, cmMPFlowAgingTimer, cmMPFlowFwdTableSizeProfileID, cmMPFlowtableFullAction, cmMPFlowStorageType, cmMPFlowRowStatus, cmMPFlowLearningConfigAction, cmMPFlowFPList } STATUS current DESCRIPTION "A collection of objects used to manage the MP flow entry Group." ::= { cmFacilityGroups 23 } cmMPFlowMemberGroup OBJECT-GROUP OBJECTS{ cmMPFlowMemberFPIndex, cmMPFlowPointRowStatus } STATUS current DESCRIPTION "A collection of objects used to manage the MP flow Member entry Group." ::= { cmFacilityGroups 24 } cmEthernetTrafficPortPcpGroup OBJECT-GROUP OBJECTS{ cmEthernetTrafficPortPcpDEEncIndex, cmEthernetTrafficPortPcpDEEncInPriority, cmEthernetTrafficPortPcpDEEncDropIneligiblePrio, cmEthernetTrafficPortPcpDEEncDropEligiblePrio, cmEthernetTrafficPortPcpDEDecIndex, cmEthernetTrafficPortPcpDEDecInPriority, cmEthernetTrafficPortPcpDEDecOutPriority, cmEthernetTrafficPortPcpDEDecDropEligible, cmEthernetTrafficPortPcpDEPairIndex, cmEthernetTrafficPortPcpDEDropIneligiblePrio, cmEthernetTrafficPortPcpDEDropEligiblePrio, cmEthernetTrafficPortClbIndex, cmEthernetTrafficPortClbEnabled, cmEthernetTrafficPortClbLength, cmEthernetTrafficPortClbDescr } STATUS current DESCRIPTION "A collection of objects used to manage the traffic port pcp Group." ::= { cmFacilityGroups 25 } neTMParamsGroup OBJECT-GROUP OBJECTS{ neTMParamsBandwidthProfileMode, neTMParamsAgingtime } STATUS current DESCRIPTION "A collection of objects used to manage the ne facility entry Group." ::= { cmFacilityGroups 26 } cmEthernetTrafficPortGroup OBJECT-GROUP OBJECTS{ cmEthernetTrafficPortIndex,cmEthernetTrafficPortIfIndex, cmEthernetTrafficPortEntityIndex,cmEthernetTrafficPortAdminState, cmEthernetTrafficPortOperationalState,cmEthernetTrafficPortSecondaryState, cmEthernetTrafficPortMTU,cmEthernetTrafficPortMediaType, cmEthernetTrafficPortConfigSpeed,cmEthernetTrafficPortNegotiatedSpeed, cmEthernetTrafficPortMDIXType,cmEthernetTrafficPortMDIXStatus, cmEthernetTrafficPortSfpVendorName,cmEthernetTrafficPortSfpPartNumber, cmEthernetTrafficPortSfpSerialNumber,cmEthernetTrafficPortSfpDateOfManufacture, cmEthernetTrafficPortSfpConnectorValue, cmEthernetTrafficPortSfpLinkLength,cmEthernetTrafficPortSfpLaserWaveLength, cmEthernetTrafficPortSfpMediaType,cmEthernetTrafficPortLoopbackConfig, cmEthernetTrafficPortLoopbackStatus,cmEthernetTrafficPortLoopbackTime, cmEthernetTrafficPortLoopbackSwapSADA,cmEthernetTrafficPortOuterVlanLoopbackMask, cmEthernetTrafficPortOuterVlanLoopback1,cmEthernetTrafficPortOuterVlanLoopback2, cmEthernetTrafficPortOuterVlanLoopback3,cmEthernetTrafficPortLinkLossFwdEnabled, cmEthernetTrafficPortLinkLossFwdSignalType,cmEthernetTrafficPortLinkLossFwdTriggerTypes, cmEthernetTrafficPortLinkLossFwdDelay,cmEthernetTrafficPortLinkLossFwdActive, cmEthernetTrafficPortLinkLossFwdPartnerEnabled,cmEthernetTrafficPortLinkLossFwdLocalLinkId, cmEthernetTrafficPortLinkLossFwdRemoteLinkIds,cmEthernetTrafficPortLinkLossFwdTxActionType, cmEthernetTrafficPortLinkLossFwdRxRLDLinkIds,cmEthernetTrafficPortOamId, cmEthernetTrafficPortOamDiscoveryState, cmEthernetTrafficPortOamLocalVarRtrvsEnabled,cmEthernetTrafficPortOamLocalLinkEventsEnabled, cmEthernetTrafficPortOamLocalOamLoopbacksSupported,cmEthernetTrafficPortOamLocalUnidirSupportEnabled, cmEthernetTrafficPortOamLocalMaxPDUSize,cmEthernetTrafficPortOamLocalMode, cmEthernetTrafficPortOamRemoteMacAddress,cmEthernetTrafficPortOamRemoteVarRtrvsEnabled, cmEthernetTrafficPortOamRemoteLinkEventsEnabled,cmEthernetTrafficPortOamRemoteOamLoopbacksSupported, cmEthernetTrafficPortOamRemoteUnidirSupportEnabled,cmEthernetTrafficPortOamRemoteMaxPDUSize, cmEthernetTrafficPortOamRemoteMode,cmEthernetTrafficPortOamEnabled, cmEthernetTrafficPortOamAdminState, cmEthernetTrafficPortSvcType, cmEthernetTrafficPortTxPauseEnabled,cmEthernetTrafficPortAfpType, cmEthernetTrafficPortShapingEnabled,cmEthernetTrafficPortShapedSpeedLo, cmEthernetTrafficPortShapedSpeedHi,cmEthernetTrafficPortQinQEtherType, cmEthernetTrafficPortEgressVlanTrunkingEnabled,cmEthernetTrafficPortIngressPushPVIDEnabled, cmEthernetTrafficPortEgressPopPVIDEnabled,cmEthernetTrafficPortPortVlanId, cmEthernetTrafficPortPortVlanPriority,cmEthernetTrafficPortPriorityVlanId, cmEthernetTrafficPortIngressPrioMapMode,cmEthernetTrafficPortIngressCOSPriority, cmEthernetTrafficPortEgressPopPriorityVidEnabled, cmEthernetTrafficPortSyncEEnabled, cmEthernetTrafficPortQLModeEnabled,cmEthernetTrafficPortExpectedQL, cmEthernetTrafficPortAssumedQL,cmEthernetTrafficPortReceivedQL, cmEthernetTrafficPortTransmitQL,cmEthernetTrafficPortTagFrameControl, cmEthernetTrafficPortRxPauseEnabled, cmEthernetTrafficPortPhyType, cmEthernetTrafficPortSfpLaserWaveLengthPicometer, cmEthernetTrafficPortRowStatus, cmEthernetTrafficPortSSMRemoteMacAddress, cmEthernetTrafficPortInnerVlanLoopbackMask, cmEthernetTrafficPortInnerVlanLoopback1, cmEthernetTrafficPortInnerVlanLoopback2, cmEthernetTrafficPortInnerVlanLoopback3, cmEthernetTrafficPortLaserWDMChannel, cmEthernetTrafficPortLaserIsTunable, cmEthernetTrafficPortLaserFrequency, cmEthernetTrafficPortDeiEnable, cmEthernetTrafficPortPcpDEEncType, cmEthernetTrafficPortPcpDEPairsAction, cmEthernetTrafficPortInitiateDiag, cmEthernetTrafficPortDiagnosePair1Cond, cmEthernetTrafficPortDiagnosePair2Cond, cmEthernetTrafficPortDiagnosePair3Cond, cmEthernetTrafficPortDiagnosePair4Cond, cmEthernetTrafficPortDiagnoseAutoNegCond, cmEthernetTrafficPortDiagnoseLpbkCond, cmEthernetTrafficPortDiagnoseEfmLpbkCond, cmEthernetTrafficPortDiagnoseResult, cmEthernetTrafficPortDiagnoseTestStatus, cmEthernetTrafficPortDiagnoseTestTime, cmEthernetTrafficPortAutoDiagEnabled, cmEthernetTrafficPortDeleteEntitiesAction, cmEthernetTrafficPortMaxMpFpNum, cmEthernetTrafficPortJdsuLoopbackEnabled, cmEthernetTrafficPortJdsuLoopbackVlanId, cmEthernetTrafficPortIngressPopPriorityVidEnabled, cmEthernetTrafficPortRxDeiAction, cmEthernetTrafficPortTxDeiAction, cmEthernetTrafficPortRxDeiOuterTagType, cmEthernetTrafficPortTxDeiOuterTagType, cmEthernetTrafficPortMode, cmEthernetTrafficPortServiceType, cmEthernetTrafficPortLoopbackSourceMacControlEnabled, cmEthernetTrafficPortLoopbackDestMacControlEnabled, cmEthernetTrafficPortLoopbackSourceMacAddress, cmEthernetTrafficPortLoopbackDestMacAddress, cmEthernetTrafficPortLoopbackBlockingEnabled, cmEthernetTrafficPortMediaTypeAutoSelected, cmEthernetTrafficPortLowLatencyQueuingEnabled, cmEthernetTrafficPortDiagnosticMacAddress, cmEthernetTrafficPortMcastRateLimitSpeedHi, cmEthernetTrafficPortBcastRateLimitEnabled, cmEthernetTrafficPortBcastRateLimitSpeedLo, cmEthernetTrafficPortBcastRateLimitSpeedHi, cmEthernetTrafficPortCombinedRateLimitEnabled, cmEthernetTrafficPortCombinedRateLimitSpeedLo, cmEthernetTrafficPortCombinedRateLimitSpeedHi, cmEthernetTrafficPortRefPrioMapProfile, cmEthernetTrafficPortIngressSwapPriorityVIDEnabled, cmEthernetTrafficPortEgressSwapPriorityVIDEnabled, cmEthernetTrafficPortSwapPriorityVID, cmEthernetTrafficPortExpDEEncType, cmEthernetTrafficPortExpDEPairsAction, cmEthernetTrafficPortJdsuLoopbackSrcIp, cmEthernetTrafficPortTxSsm, cmEthernetTrafficPortRxSsmQL, cmEthernetTrafficPortSyncEMode, cmEthernetTrafficPortSyncEServiceAvailableTime, cmEthernetTrafficPortSyncEServiceUnavailableTime, cmEthernetTrafficPortSyncEServiceAvailablePercentage, cmEthernetTrafficPortWfqSegmentationCOS, cmEthernetTrafficPortWfqGroupCOS, cmEthernetTrafficPortWfqGroupEirLo, cmEthernetTrafficPortWfqGroupEirHi, cmEthernetTrafficPortOuterTagTpidOverride, cmEthernetTrafficPortOuterTagTpid, cmEthernetTrafficPortSfpTxPowerLevel, cmEthernetTrafficPortSfpRxPowerLevel, cmEthernetTrafficPortBwResourcePort, cmEthernetTrafficPortSfpName, cmEthernetTrafficPortSfpHardwareRevision, cmEthernetTrafficPortLoopbackTestReflectorIPv4AddressControl, cmEthernetTrafficPortLoopbackTestReflectorIPv4Address, cmEthernetTrafficPortLoopbackTestReflectorIPv6AddressControl, cmEthernetTrafficPortLoopbackTestReflectorIPv6Address, cmEthernetTrafficPortSfpIdentifierValue, cmEthernetTrafficPortPlugType, cmEthernetTrafficPortPlugMode, cmEthernetTrafficPortPlugGMetroAutoTuningMode, cmEthernetTrafficPortPlugChannelType, cmEthernetTrafficPortPlugITUCbandChannel, cmEthernetTrafficPortPlugRelativeChannel, cmEthernetTrafficPortPlugFrequency, cmEthernetTrafficPortPlugOutOfBandChannelStatus, cmEthernetTrafficPortRemotePlugITUCbandChannel, cmEthernetTrafficPortRemotePlugRelativeChannel, cmEthernetTrafficPortRemotePlugFrequency, cmEthernetTrafficPortRemoteSfpVendorName, cmEthernetTrafficPortRemoteSfpName, cmEthernetTrafficPortRemoteSfpPartNumber, cmEthernetTrafficPortRemoteSfpHardwareRevision, cmEthernetTrafficPortRemoteSfpSerialNumber, cmEthernetTrafficPortRemoteSfpDateOfManufacture, cmEthernetTrafficPortRemoteSfpLinkLength, cmEthernetTrafficPortRemoteSfpLaserWaveLength, cmEthernetTrafficPortRemoteSfpLaserFrequency, cmEthernetTrafficPortRemoteSfpMediaType, cmEthernetTrafficPortRemoteSfpConnectorValue, cmEthernetTrafficPortRemoteSfpIdentifierValue } STATUS current DESCRIPTION "A collection of objects used to manage the traffic port entry Group." ::= { cmFacilityGroups 27 } cmFlowPointGroup OBJECT-GROUP OBJECTS{ cmFlowPointIndex,cmFlowPointCircuitName, cmFlowPointAdminState,cmFlowPointOperationalState, cmFlowPointSecondaryState,cmFlowPointAssociatedFlowId, cmFlowPointIngressMultiCOS,cmFlowPointIngressCOS, cmFlowPointIngressVlanMemberList,cmFlowPointVlanMemberAction, cmFlowPointAssociatedAclProfile,cmFlowPointSESFramesLossThresholdRatio, cmFlowPointVlanMemberActionVlan,cmFlowPointIngressUntaggedFrameEnabled, cmFlowPointCTagControl,cmFlowPointCTagVlanId, cmFlowPointCTagVlanPriority,cmFlowPointSTagControl, cmFlowPointSTagVlanId,cmFlowPointSTagVlanPriority, cmFlowPointEgressOuterTagPrioMapEnabled,cmFlowPointColorMarkingSupported, cmFlowPointStorageType, cmFlowPointRowStatus, cmFlowPointDefaultMemberEnabled, cmFlowPointMcastRateLimitEnabled, cmFlowPointMcastRateLimitSpeedLo, cmFlowPointMcastRateLimitSpeedHi, cmFlowPointBcastRateLimitEnabled, cmFlowPointBcastRateLimitSpeedLo, cmFlowPointBcastRateLimitSpeedHi, cmFlowPointSplitHorizonGroupOID, cmFlowPointLoopAvoidance, cmFlowPointHierarchicalCosEnabled, cmFlowPointWfqQid, cmFlowPointWfqOutPriority, cmFlowPointMaximumBWLo, cmFlowPointGuaranteedBWLo, cmFlowPointMaximumBWHi, cmFlowPointGuaranteedBWHi, cmFlowPointRefPrioMapProfile, cmFlowPointMcastAndBcastRateLimitEnabled, cmFlowPointMcastAndBcastRateLimitSpeedLo, cmFlowPointMcastAndBcastRateLimitSpeedHi, cmFlowPointEgressShapingType, cmFlowPointEgressInnerTagPrioMapEnabled, cmFlowPointAutoBandwidthConfigEnabled, cmFlowPointAutoCIRPercentage, cmFlowPointFrameFwdEnabled, cmFlowPointUsePortPrioMapProfile, cmFlowPointRefEoMplsPwObject, cmFlowPointElmiEvcIdentifier, cmFlowPointRefElpObject, cmFlowPointEfEnabled, cmFlowPointEfIdentificationType, cmFlowPointEfRateThresholdLo, cmFlowPointEfRateThresholdHi, cmFlowPointAclNoMatchDisposition, cmFlowPointEfIdentificationFields, cmFlowPointWfqSegmentationCOS, cmFlowPointWfqGroupCOS, cmFlowPointWfqGroupEirLo, cmFlowPointWfqGroupEirHi } STATUS current DESCRIPTION "A collection of objects used to manage the flow point entry Group." ::= { cmFacilityGroups 28 } ethernetAccessPortJdsuExtGroup OBJECT-GROUP OBJECTS { cmEthernetAccPortJDSUControlFramesSnoopingEnabled, cmEthernetAccPortJDSULoopbackVlan, cmEthernetAccPortJDSULoopbackVlanList } STATUS current DESCRIPTION " A collection of objects used to manage the F3 Ethernet Access Port JDSU extense function." ::= { cmFacilityGroups 29 } ethernetNetworkPortJdsuExtGroup OBJECT-GROUP OBJECTS { cmEthernetNetPortJDSUControlFramesSnoopingEnabled, cmEthernetNetPortJDSULoopbackVlan, cmEthernetNetPortJDSULoopbackVlanList } STATUS current DESCRIPTION " A collection of objects used to manage the F3 Ethernet Network Port JDSU extense function." ::= { cmFacilityGroups 30 } cmTrafficPortLpbkGroup OBJECT-GROUP OBJECTS{ cmEthernetTrafficPortLpbkIndex, cmEthernetTrafficPortLpbkInnerVlanEnabled, cmEthernetTrafficPortLpbkInnerVlanTag, cmEthernetTrafficPortLpbkOuterVlanEnabled, cmEthernetTrafficPortLpbkOuterVlanTag, cmEthernetTrafficPortLpbkTime, cmEthernetTrafficPortLpbkStatus, cmEthernetTrafficPortLpbkConfig } STATUS current DESCRIPTION "A collection of objects used to manage the traffic port lpbk group." ::= { cmFacilityGroups 31 } cmPrioMapV2ProfileGroup OBJECT-GROUP OBJECTS{ cmPrioMapV2ProfileIndex, cmPrioMapV2ProfileAlias, cmPrioMapV2ProfileMapModeType, cmPrioMapV2ProfileStorageType, cmPrioMapV2ProfileRowStatus, cmPrioMapV2ProfileIngressCosPriority } STATUS current DESCRIPTION "A collection of objects used to manage the priority map profile group." ::= { cmFacilityGroups 32 } cmPrioMapV2IngressPrioMappingGroup OBJECT-GROUP OBJECTS{ cmPrioMapV2IngressPrioMappingIndex, cmPrioMapV2IngressPrioMappingInPriority, cmPrioMapV2IngressPrioMappingCOS } STATUS current DESCRIPTION "A collection of objects used to manage the priority map group." ::= { cmFacilityGroups 33 } bits8PortGroupGroup OBJECT-GROUP OBJECTS { bits8PortGroupIndex, bits8PortGroupIfIndex, bits8PortGroupAdminState, bits8PortGroupOperationalState, bits8PortGroupSecondaryState, bits8PortGroupLineType, bits8PortGroupLineCode, bits8PortGroupFrameFormat, bits8PortGroupSaBitDesignation, bits8PortGroupQLModeEnabled, bits8PortGroupTransmitQL, bits8PortGroupSquelchQL, bits8PortGroupLineBuildOut,bits8PortGroupImpedance, bits8PortGroupRowStatus, bits8PortGroupActivePorts, bits8PortGroupClkIfEnabledPorts } STATUS current DESCRIPTION "A collection of objects used to manage the Bits 8 Port Group function." ::= { cmFacilityGroups 34 } pps16PortGroupGroup OBJECT-GROUP OBJECTS { pps16PortGroupIndex,pps16PortGroupIfIndex,pps16PortGroupAdminState,pps16PortGroupOperationalState, pps16PortGroupSecondaryState,pps16PortGroupAlias,pps16PortGroupSquelchControl,pps16PortGroupTODSource, pps16PortGroupDirection, pps16PortGroupDelayCompensation,pps16PortGroupRowStatus --,pps16PortGroupOutputType } STATUS current DESCRIPTION "A collection of objects used to manage the Pps 16 port card Group function." ::= { cmFacilityGroups 35 } clk16PortGroupGroup OBJECT-GROUP OBJECTS { clk16PortGroupIndex,clk16PortGroupIfIndex, clk16PortGroupAdminState, clk16PortGroupOperationalState, clk16PortGroupSecondaryState, clk16PortGroupAlias,clk16PortGroupDirection,clk16PortGroupSquelchControl, clk16PortGroupSquelchQL,clk16PortGroupRowStatus } STATUS current DESCRIPTION "A collection of objects used to manage the CLK 16 port card Group function." ::= { cmFacilityGroups 36 } todPps16PortGroupGroup OBJECT-GROUP OBJECTS { todPps16PortGroupIndex,todPps16PortGroupIfIndex,todPps16PortGroupAdminState , todPps16PortGroupOperationalState, todPps16PortGroupSecondaryState,todPps16PortGroupAlias , todPps16PortGroupSquelchControl, todPps16PortGroupSquelchQL, todPps16PortGroupTODSource,todPps16PortGroupOutputFormat, todPps16PortGroupDelayCompensation,todPps16PortGroupRowStatus } STATUS current DESCRIPTION "A collection of objects used to manage the TOD and PPS 16 port card Group function." ::= { cmFacilityGroups 37 } f3PolicerEnvelopeGroup OBJECT-GROUP OBJECTS { f3PolicerEnvelopeIndex,f3PolicerEnvelopeCouplingFlag, f3PolicerEnvelopeStorageType,f3PolicerEnvelopeRowStatus, f3EnvelopeAssocPolicer } STATUS current DESCRIPTION "A collection of objects used to manage the policer envelope group function." ::= { cmFacilityGroups 38 } cmNetPortExpDeGroup OBJECT-GROUP OBJECTS { cmNetPortExpDEEncIndex, cmNetPortExpDEEncInPriority, cmNetPortExpDEEncDropIneligiblePrio, cmNetPortExpDEEncDropEligiblePrio, cmNetPortExpDEDecIndex, cmNetPortExpDEDecInPriority, cmNetPortExpDEDecOutPriority, cmNetPortExpDEDecDropEligible, cmNetPortExpDEPairIndex, cmNetPortExpDEDropIneligiblePrio, cmNetPortExpDEDropEligiblePrio } STATUS current DESCRIPTION "A collection of objects used to manage the exp de decoding and encoding group function." ::= { cmFacilityGroups 39 } cmNetPortIpPrecDeGroup OBJECT-GROUP OBJECTS { cmNetPortIpPrecDEEncIndex, cmNetPortIpPrecDEEncInPriority, cmNetPortIpPrecDEEncDropIneligiblePrio, cmNetPortIpPrecDEEncDropEligiblePrio, cmNetPortIpPrecDEDecIndex, cmNetPortIpPrecDEDecInPriority, cmNetPortIpPrecDEDecOutPriority, cmNetPortIpPrecDEDecDropEligible, cmNetPortIpPrecDEPairIndex, cmNetPortIpPrecDEDropIneligiblePrio, cmNetPortIpPrecDEDropEligiblePrio } STATUS current DESCRIPTION "A collection of objects used to manage the ip prec de decoding and encoding group function." ::= { cmFacilityGroups 40 } cmNetPortEncapPcpDeGroup OBJECT-GROUP OBJECTS { cmNetPortEncapPcpDEEncIndex, cmNetPortEncapPcpDEEncInPriority, cmNetPortEncapPcpDEEncDropIneligiblePrio, cmNetPortEncapPcpDEEncDropEligiblePrio, cmNetPortEncapPcpDEDecIndex, cmNetPortEncapPcpDEDecInPriority, cmNetPortEncapPcpDEDecOutPriority, cmNetPortEncapPcpDEDecDropEligible, cmNetPortEncapPcpDEPairIndex, cmNetPortEncapPcpDEDropIneligiblePrio, cmNetPortEncapPcpDEDropEligiblePrio } STATUS current DESCRIPTION "A collection of objects used to manage the encap PCP de decoding and encoding group function." ::= { cmFacilityGroups 41 } f3SatelliteGroup OBJECT-GROUP OBJECTS { f3SatelliteIndex, f3SatelliteSV, f3SatelliteInUse, f3SatelliteSVType, f3SatelliteCNO, f3SatelliteHealth, f3SatelliteAzimuth, f3SatelliteElevation, f3SatelliteGnssReceiverPort } STATUS current DESCRIPTION "A collection of objects used to manage the GNSS satellite group function." ::= { cmFacilityGroups 42 } cmEthernetTrafficPortJdsuExtGroup OBJECT-GROUP OBJECTS{ cmEthernetTrafficPortJDSUControlFramesSnoopingEnabled, cmEthernetTrafficPortJDSULoopbackVlan, cmEthernetTrafficPortJDSULoopbackVlanList } STATUS current DESCRIPTION "A collection of objects used to manage the F3 Ethernet Traffic Port JDSU extense function." ::= { cmFacilityGroups 43 } f3FpQosShaperGroup OBJECT-GROUP OBJECTS{ f3FpQosShaperIndex, f3FpQosShaperAdminState, f3FpQosShaperOperationalState, f3FpQosShaperSecondaryState, f3FpQosShaperCIRLo, f3FpQosShaperCIRHi, f3FpQosShaperEIRLo, f3FpQosShaperEIRHi, f3FpQosShaperCBS, f3FpQosShaperEBS, f3FpQosShaperBufferSize, f3FpQosShaperCOS, f3FpQosShaperStorageType, f3FpQosShaperRowStatus, f3FpQosShaperWfqWeight } STATUS current DESCRIPTION "A collection of objects used to manage the F3 Ethernet Traffic Port FlowPoint Shaper." ::= { cmFacilityGroups 44 } f3FpQosPolicerGroup OBJECT-GROUP OBJECTS{ f3FpQosPolicerIndex, f3FpQosPolicerAdminState, f3FpQosPolicerOperationalState, f3FpQosPolicerSecondaryState, f3FpQosPolicerCIRLo, f3FpQosPolicerCIRHi, f3FpQosPolicerEIRLo, f3FpQosPolicerEIRHi, f3FpQosPolicerCBS, f3FpQosPolicerEBS, f3FpQosPolicerAlgorithm, f3FpQosPolicerColorMode, f3FpQosPolicerCouplingFlag, f3FpQosPolicerPolicingEnabled, f3FpQosPolicerStorageType, f3FpQosPolicerRowStatus, f3FpQosPolicerCIRMaxHi, f3FpQosPolicerCIRMaxLo, f3FpQosPolicerEIRMaxHi, f3FpQosPolicerEIRMaxLo, f3FpQosPolicerEnvelopeObject, f3FpQosPolicerRank } STATUS current DESCRIPTION "A collection of objects used to manage the F3 Ethernet Traffic Port FlowPoint Policer." ::= { cmFacilityGroups 45 } cpdV2TrafficPortGroup OBJECT-GROUP OBJECTS { cmEthernetTrafficPortCpdV2Index, cmEthernetTrafficPortCpdV2CiscoGroupDispType, cmEthernetTrafficPortCpdV2IslDispType, cmEthernetTrafficPortCpdV2PagpDispType, cmEthernetTrafficPortCpdV2UdldDispType, cmEthernetTrafficPortCpdV2CdpDispType, cmEthernetTrafficPortCpdV2VtpDispType, cmEthernetTrafficPortCpdV2DtpDispType, cmEthernetTrafficPortCpdV2PvstpPlusDispType, cmEthernetTrafficPortCpdV2UplinkFastDispType, cmEthernetTrafficPortCpdV2VlanBridgeDispType, cmEthernetTrafficPortCpdV2L2PTDispType, cmEthernetTrafficPortCpdV2BridgeGroupDispType, cmEthernetTrafficPortCpdV2BPDUDispType, cmEthernetTrafficPortCpdV2PauseDispType, cmEthernetTrafficPortCpdV2LACPDispType, cmEthernetTrafficPortCpdV2LACPMarkerDispType, cmEthernetTrafficPortCpdV2EfmOamDispType, cmEthernetTrafficPortCpdV2SSMDispType, cmEthernetTrafficPortCpdV2PortAuthenDispType, cmEthernetTrafficPortCpdV2BridgeReservedDispType, cmEthernetTrafficPortCpdV2LANBridgesDispType, cmEthernetTrafficPortCpdV2GARPGroupDispType, cmEthernetTrafficPortCpdV2GMRPDispType, cmEthernetTrafficPortCpdV2GVRPDispType, cmEthernetTrafficPortCpdV2GARPDispType, cmEthernetTrafficPortCpdV2Mac00DispType, cmEthernetTrafficPortCpdV2Mac01DispType, cmEthernetTrafficPortCpdV2Mac02DispType, cmEthernetTrafficPortCpdV2Mac03DispType, cmEthernetTrafficPortCpdV2Mac04DispType, cmEthernetTrafficPortCpdV2Mac05DispType, cmEthernetTrafficPortCpdV2Mac06DispType, cmEthernetTrafficPortCpdV2Mac07DispType, cmEthernetTrafficPortCpdV2Mac08DispType, cmEthernetTrafficPortCpdV2Mac09DispType, cmEthernetTrafficPortCpdV2Mac0ADispType, cmEthernetTrafficPortCpdV2Mac0BDispType, cmEthernetTrafficPortCpdV2Mac0CDispType, cmEthernetTrafficPortCpdV2Mac0DDispType, cmEthernetTrafficPortCpdV2Mac0EDispType, cmEthernetTrafficPortCpdV2Mac0FDispType, cmEthernetTrafficPortCpdV2NearestLLDPDispType, cmEthernetTrafficPortCpdV2NonTpmrLLDPDispType, cmEthernetTrafficPortCpdV2CustomerLLDPDispType, cmEthernetTrafficPortCpdV2PtpUntaggedDispType, cmEthernetTrafficPortCpdV2PtpTaggedDispType, f3FlowPointCpdV2Index, f3FlowPointCpdV2IslDispType, f3FlowPointCpdV2PagpDispType, f3FlowPointCpdV2UdldDispType, f3FlowPointCpdV2CdpDispType, f3FlowPointCpdV2VtpDispType, f3FlowPointCpdV2DtpDispType, f3FlowPointCpdV2PvstpPlusDispType, f3FlowPointCpdV2UplinkFastDispType, f3FlowPointCpdV2VlanBridgeDispType, f3FlowPointCpdV2L2PTDispType, f3FlowPointCpdV2BPDUDispType, f3FlowPointCpdV2PauseDispType, f3FlowPointCpdV2LACPDispType, f3FlowPointCpdV2LACPMarkerDispType, f3FlowPointCpdV2EfmOamDispType, f3FlowPointCpdV2SSMDispType, f3FlowPointCpdV2PortAuthenDispType, f3FlowPointCpdV2LANBridgesDispType, f3FlowPointCpdV2GMRPDispType, f3FlowPointCpdV2GVRPDispType, f3FlowPointCpdV2GARPDispType, f3FlowPointCpdV2ActiveControlProtocols, f3FlowPointCpdV2ELMIDispType, f3FlowPointCpdV2Mac00DispType, f3FlowPointCpdV2Mac01DispType, f3FlowPointCpdV2Mac02DispType, f3FlowPointCpdV2Mac03DispType, f3FlowPointCpdV2Mac04DispType, f3FlowPointCpdV2Mac05DispType, f3FlowPointCpdV2Mac06DispType, f3FlowPointCpdV2Mac07DispType, f3FlowPointCpdV2Mac08DispType, f3FlowPointCpdV2Mac09DispType, f3FlowPointCpdV2Mac0ADispType, f3FlowPointCpdV2Mac0BDispType, f3FlowPointCpdV2Mac0CDispType, f3FlowPointCpdV2Mac0DDispType, f3FlowPointCpdV2Mac0EDispType, f3FlowPointCpdV2Mac0FDispType, f3FlowPointCpdV2NearestLLDPDispType, f3FlowPointCpdV2NonTpmrLLDPDispType, f3FlowPointCpdV2CustomerLLDPDispType } STATUS current DESCRIPTION "A collection of objects used to manage the Control Protocol Disposition version 2 function." ::= { cmFacilityGroups 46 } f3AclRuleGroup OBJECT-GROUP OBJECTS{ f3AclRuleIndex, f3AclRuleAdminState, f3AclRuleAlias, f3AclRulePriority, f3AclRuleOperation, f3AclRuleCosOverrideControl, f3AclRuleCOS, f3AclRuleSrcMacAddressControl, f3AclRuleSrcMacAddress, f3AclRuleSrcMacAddressMask, f3AclRuleDstMacAddressControl, f3AclRuleDstMacAddress, f3AclRuleDstMacAddressMask, f3AclRuleOuterVlanVIDControl, f3AclRuleOuterVlanVIDLowLimit, f3AclRuleOuterVlanVIDHighLimit, f3AclRuleInnerVlanVIDControl, f3AclRuleInnerVlanVIDLowLimit, f3AclRuleInnerVlanVIDHighLimit, f3AclRuleOuterVlanPcpControl, f3AclRuleOuterVlanPcpLowLimit, f3AclRuleOuterVlanPcpHighLimit, f3AclRuleInnerVlanPcpControl, f3AclRuleInnerVlanPcpLowLimit, f3AclRuleInnerVlanPcpHighLimit, f3AclRuleOuterVlanDeiControl, f3AclRuleOuterVlanDei, f3AclRuleEtherTypeControl, f3AclRuleEtherType, f3AclRuleIpv4PriorityControl, f3AclRuleIpv4PriorityLowLimit, f3AclRuleIpv4PriorityHighLimit, f3AclRuleProtocolControl, f3AclRuleProtocolNumber, f3AclRuleSrcIpv4AddressControl, f3AclRuleSrcIpv4AddressLowLimit, f3AclRuleSrcIpv4AddressHighLimit, f3AclRuleDstIpv4AddressControl, f3AclRuleDstIpv4AddressLowLimit, f3AclRuleDstIpv4AddressHighLimit, f3AclRuleSrcPortControl, f3AclRuleSrcPortLowLimit, f3AclRuleSrcPortHighLimit, f3AclRuleDstPortControl, f3AclRuleDstPortLowLimit, f3AclRuleDstPortHighLimit, f3AclRuleTcpFlagsControl, f3AclRuleTcpFlags, f3AclRuleStorageType, f3AclRuleRowStatus, f3AclRuleActive, f3AclRuleSrcIpv6AddressControl, f3AclRuleSrcIpv6Address, f3AclRuleSrcIpv6AddressPrefixLen, f3AclRuleDstIpv6AddressControl, f3AclRuleDstIpv6Address, f3AclRuleDstIpv6AddressPrefixLen, f3AclRuleIpV6FlowLabelControl, f3AclRuleIpV6FlowLabel, f3AclRulePriorityControl, f3AclRulePriorityLowLimit, f3AclRulePriorityHighLimit } STATUS current DESCRIPTION "A collection of objects used to manage the F3 Ethernet Traffic Port FlowPoint ACL Rule." ::= { cmFacilityGroups 47 } f3EthernetTrafficPortExpDeGroup OBJECT-GROUP OBJECTS { f3EthernetTrafficPortExpDEEncIndex, f3EthernetTrafficPortExpDEEncInPriority, f3EthernetTrafficPortExpDEEncDropIneligiblePrio, f3EthernetTrafficPortExpDEEncDropEligiblePrio, f3EthernetTrafficPortExpDEDecIndex, f3EthernetTrafficPortExpDEDecInPriority, f3EthernetTrafficPortExpDEDecOutPriority, f3EthernetTrafficPortExpDEDecDropEligible, f3EthernetTrafficPortExpDEPairIndex, f3EthernetTrafficPortExpDEDropIneligiblePrio, f3EthernetTrafficPortExpDEDropEligiblePrio } STATUS current DESCRIPTION "A collection of objects used to manage the F3 Ethernet Traffic Port Exp De Decoding/Encoding group function." ::= { cmFacilityGroups 48 } f3XdslAndPpppoeParamGroup OBJECT-GROUP OBJECTS { cmEthernetNetPortXdslConnControl, cmEthernetNetPortXdslModulationMode, cmEthernetNetPortXdslBitSwapEnabled, cmEthernetNetPortXdslGvectorEnabled, cmEthernetNetPortXdslVdslProfile, cmEthernetNetPortXdslStatus, cmEthernetNetPortXdslCurVdslProfile, cmEthernetNetPortXdslActualLinkRateUpStream, cmEthernetNetPortXdslActualLinkRateDownStream, cmEthernetNetPortXdslControlChannel, cmEthernetNetPortXdslCarrierSet, cmEthernetNetPortXdslMode, cmEthernetNetPortXdslAnnex, cmEthernetNetPortXdslDsSNRMargin, cmEthernetNetPortXdslUsSNRMargin, cmEthernetNetPortXdslDsSignalAttenuation, cmEthernetNetPortXdslDsLineAttenuation, cmEthernetNetPortXdslDsTxPower, cmEthernetNetPortXdslUsTxPower, cmEthernetNetPortXdslDsAttainableRate, cmEthernetNetPortXdslUsAttainableRate, cmEthernetNetPortPppoeOuterVlanControl, cmEthernetNetPortPppoeOuterVlanEtherType, cmEthernetNetPortPppoeOuterVlanId, cmEthernetNetPortPppoeOuterVlanPriority, cmEthernetNetPortPppoeInnerVlanControl, cmEthernetNetPortPppoeInnerVlanEtherType, cmEthernetNetPortPppoeInnerVlanId, cmEthernetNetPortPppoeInnerVlanPriority, cmEthernetNetPortPppoeServiceName, cmEthernetNetPortPppoeLcpKeepAlivePeriod, cmEthernetNetPortPppoeLcpRetryThreshold, cmEthernetNetPortPppoeRxAcName, cmEthernetNetPortPppoeRxServiceName, cmEthernetNetPortPppoeSessionId, cmEthernetNetPortPppoeConnStatus } STATUS current DESCRIPTION "A collection of objects used to manage the F3 Ethernet Traffic Port XDSL Parameter." ::= { cmFacilityGroups 49 } sciPortGroup OBJECT-GROUP OBJECTS { sciPortIndex, sciPortAdminState, sciPortOperationalState, sciPortSignalMode, sciPortSignalDirection, sciPortRxSsmQL } STATUS current DESCRIPTION "A collection of objects used to manage the SCI port." ::= { cmFacilityGroups 50 } cmTrafficPortQosShaperGroup OBJECT-GROUP OBJECTS { cmTrafficPortQosShaperIndex, cmTrafficPortQosShaperAdminState, cmTrafficPortQosShaperOperationalState, cmTrafficPortQosShaperSecondaryState, cmTrafficPortQosShaperAssociatedQueueProfile, cmTrafficPortQosShaperBufferSize, cmTrafficPortQosShaperCIRLo, cmTrafficPortQosShaperCIRHi, cmTrafficPortQosShaperEIRLo, cmTrafficPortQosShaperEIRHi, cmTrafficPortQosShaperStorageType, cmTrafficPortQosShaperRowStatus, cmTrafficPortQosShaperIngressAverageFrameSize, cmTrafficPortQosShaperAdditionalCIRLo, cmTrafficPortQosShaperAdditionalCIRHi, cmTrafficPortQosShaperWfqWeight } STATUS current DESCRIPTION "A collection of objects used to manage the Ethernet Traffic Port QOS Shaper." ::= { cmFacilityGroups 51 } f3IrigPortGroup OBJECT-GROUP OBJECTS { -- f3IrigRs422OutputPortTable columns f3IrigRs422OutputPortIndex, f3IrigRs422OutputPortIfIndex, f3IrigRs422OutputPortEntityIndex, f3IrigRs422OutputPortAlias, f3IrigRs422OutputPortAdminState, f3IrigRs422OutputPortOperationalState, f3IrigRs422OutputPortSecondaryState, f3IrigRs422OutputPortTimeCode, f3IrigRs422OutputPortControlField, -- f3IrigOpticalOutputPortTable columns f3IrigOpticalOutputPortIndex, f3IrigOpticalOutputPortIfIndex, f3IrigOpticalOutputPortEntityIndex, f3IrigOpticalOutputPortAlias, f3IrigOpticalOutputPortAdminState, f3IrigOpticalOutputPortOperationalState, f3IrigOpticalOutputPortSecondaryState, f3IrigOpticalOutputPortTimeCode, f3IrigOpticalOutputPortControlField, -- f3IrigRelayOutputPortTable columns f3IrigRelayOutputPortIndex, f3IrigRelayOutputPortIfIndex, f3IrigRelayOutputPortEntityIndex, f3IrigRelayOutputPortAlias, f3IrigRelayOutputPortAdminState, f3IrigRelayOutputPortOperationalState, f3IrigRelayOutputPortSecondaryState, f3IrigRelayOutputPortRelayOperation, -- f3IrigOutputGroupTable columns f3IrigOutputGroupIndex, f3IrigOutputGroupIfIndex, f3IrigOutputGroupEntityIndex, f3IrigOutputGroupAlias, f3IrigOutputGroupExtensionType, f3IrigOutputGroupExtensionDetection, -- f3IrigOutputUnitPortTable columns f3IrigOutputUnitPortIndex, f3IrigOutputUnitPortIfIndex, f3IrigOutputUnitPortEntityIndex, f3IrigOutputUnitPortAlias, f3IrigOutputUnitPortAdminState, f3IrigOutputUnitPortOperationalState, f3IrigOutputUnitPortSecondaryState, f3IrigOutputUnitPortTimeCode, f3IrigOutputUnitPortControlField, f3IrigOutputUnitPortType, f3IrigOutputUnitPortDigitalVoltage } STATUS current DESCRIPTION "A collection of objects used to manage IRIG Card and Port." ::= { cmFacilityGroups 52 } ccGroup OBJECT-GROUP OBJECTS { -- ccInputPortTable ccInputPortIndex, ccInputPortIfIndex, ccInputPortEntityIndex, ccInputPortAlias, ccInputPortAdminState, ccInputPortOperationalState, ccInputPortSecondaryState, -- ccGroupPortTable ccGroupIndex, ccGroupIfIndex, ccGroupEntityIndex, ccGroupAlias, ccGroupActivePorts, ccGroupPhaseAdjust, ccGroupDutyCycle } STATUS current DESCRIPTION "A collection of objects used to manage the CC Card." ::= { cmFacilityGroups 53 } cmEncapFlowPointGroup OBJECT-GROUP OBJECTS{ cmEncapFlowPointIndex, cmEncapFlowPointCircuitName, cmEncapFlowPointAssociatedFlowId, cmEncapFlowPointRefEoMplsPwObject, cmEncapFlowPointCTagControl, cmEncapFlowPointCTagVlanId, cmEncapFlowPointCTagVlanPriority, cmEncapFlowPointSTagControl, cmEncapFlowPointSTagVlanId, cmEncapFlowPointSTagVlanPriority, cmEncapFlowPointEgressOuterTagPrioMapEnabled, cmEncapFlowPointEgressInnerTagPrioMapEnabled, cmEncapFlowPointRefPrioMapProfile, cmEncapFlowPointStorageType, cmEncapFlowPointRowStatus } STATUS current DESCRIPTION "A collection of objects used to manage the encap flow point entry Group." ::= { cmFacilityGroups 54 } END