CM-IP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Integer32, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MacAddress, RowStatus, StorageType, DisplayString, VariablePointer, TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC VlanId, IpVersion FROM CM-COMMON-MIB Ipv6Address FROM IPV6-TC fsp150cm FROM ADVA-MIB; cmIPMIB MODULE-IDENTITY LAST-UPDATED "201903140000Z" ORGANIZATION "ADVA Optical Networking SE" CONTACT-INFO "Web URL: http://adva.com/ E-mail: support@adva.com Postal: ADVA Optical Networking SE Campus Martinsried Fraunhoferstrasse 9a 82152 Martinsried/Munich Germany Phone: +49 089 89 06 65 0 Fax: +49 089 89 06 65 199 " DESCRIPTION "This module defines the IP MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA." REVISION "201903140000Z" DESCRIPTION " Notes from release 201903140000Z (1) Added cmIpInterfaceGateway to cmIpInterfaceTable (2) Added cmIpv6InterfaceGateway to cmIpv6InterfaceTable Notes from release 201904050000Z (1) chaned cmStaticRouteNextHop to RO (2) chaned cmIpv6StaticRouteNextHop to RO Notes from release 201902030000Z (1) added cmIpTraceRouteInterface (2) added cmIpv6TraceRouteInterface Notes from release 201901300000Z (1) added cmPingInterface Notes from release 201901070000Z (1) Modified cmStaticRouteNextHop: MAX-ACCESS read-write instead read-only (2) Modified cmIpv6StaticRouteNextHop: MAX-ACCESS read-write instead not-accessible Notes from release 201802130000Z (1) added ipLoopbackInterfaceTable Notes from release 201802020000Z, (1) Added cmIpInterfaceDhcpVendorInfoHideControl to cmIpInterfaceTable (2) Added ipManagementTunnelDhcpVendorInfoHideControl to ipManagementTunnelTable Notes from release 201407180000Z, (1) Added new IpManagementTunnelType literals: - gcc0based, - gcc1based, - gcc2based. Notes from release 201012080000Z, (1)Added cmIpManagementTrafficBridgingSecurityEnabled scalar for the Bridged Management LAN feature on GE20x devices for Release 5.1CC. Notes from release 201010230000Z, (1)Added cmIpManagementTrafficBridgingEnabled scalar for the Bridged Management LAN feature on GE20x devices for Release 5.1CC. Notes from release 200904200000Z, (1)MIB version ready for release FSP150CC 4.1. (a)Added new table IpManagementTunnel (b)Added attribute cmIpInterfaceRIPv2Enabled (c)Added attribute cmARPEntryType (d)Added attribute cmStaticRouteInterface, cmStaticRouteAdvertise Notes from release 200803030000Z, (1)MIB version ready for release FSP150CM 3.1." ::= {fsp150cm 11} -- -- OID definitions -- cmIpObjects OBJECT IDENTIFIER ::= {cmIPMIB 1} cmIpConformance OBJECT IDENTIFIER ::= {cmIPMIB 2} cmIpScalars OBJECT IDENTIFIER ::= {cmIPMIB 3} -- -- Textual Conventions -- CmDhcpRole ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "DHCP role when DHCP is enabled on an interface." SYNTAX INTEGER { dhcp-client(1), dhcp-server(2) } IpManagementTunnelType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "IP Management Tunnel type." SYNTAX INTEGER { macbased(1), vlanbased(2), itagbased(3), gcc0based(4), gcc1based(5), gcc2based(6) } IpManagementTunnelEncapsulationType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "IP Management Tunnel Encapsulation type." SYNTAX INTEGER { ethernet(1), ppp(2) } IpEntryType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "IP Entry type." SYNTAX INTEGER { static(1), dynamic(2) } IpSourceAddrType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "IP Source Address type." SYNTAX INTEGER { systemipaddr(1), outipinterfaceaddr(2) } IpActionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "." SYNTAX INTEGER { not-applicable(0), initiate (1) } Ipv6OverIpv4TunnelType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "include four types." SYNTAX INTEGER { sixToFour (1), ipv4-compatible (2), isatap (3), static-config (4), gre (5), ipv6-6rd (6) } IpMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "include 3 types." SYNTAX INTEGER { ipv4-only (0), ipv6-only (1), ipv4-and-ipv6(2) } DHCPCIDType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "DHCP Client ID Type." SYNTAX INTEGER { notApplicable(1), sysName(2), macAddr(3), userDefined(4), serialNumber(5) } DHCPHostNameType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "DHCP Hostname Type." SYNTAX INTEGER { notApplicable(1), sysName(2), userDefined(3) } PtpArpActionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "." SYNTAX INTEGER { not-applicable(0), retrieve (1) } DHCPVendorInfoType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "DHCP Vendor Info Type." SYNTAX INTEGER { notApplicable(1), sysName(2), userDefined(3) } -- Scalars cmIpSystemScalars OBJECT IDENTIFIER ::= {cmIpScalars 1} cmIpSourceAddrScalars OBJECT IDENTIFIER ::= {cmIpScalars 2} cmIpFlushARPCacheAction OBJECT-TYPE SYNTAX IpActionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to initiate Flush ARP action." ::= { cmIpSystemScalars 1 } cmIpProxyARPEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to enable/disable Proxy ARP." ::= { cmIpSystemScalars 2 } cmIpPingDestination OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to specify the IP Address to which ICMP Ping will be initiated." ::= { cmIpSystemScalars 3 } cmIpInitiatePingAction OBJECT-TYPE SYNTAX IpActionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to initiate ICMP Ping on cmIpPingDestination." ::= { cmIpSystemScalars 4 } cmIpPingResult OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the results of a previous ICMP Ping Action." ::= { cmIpSystemScalars 5 } cmIpTraceRouteDestination OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to specify the IP Address to which Trace Route will be initiated." ::= { cmIpSystemScalars 6 } cmIpInitiateTraceRouteAction OBJECT-TYPE SYNTAX IpActionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to initiate TraceRoute on cmIpTraceRouteDestination." ::= { cmIpSystemScalars 7 } cmIpTraceRouteResult OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the results of a previous TraceRoute Action." ::= { cmIpSystemScalars 8 } cmIpManagementTrafficBridgingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the user to control the IP Management Traffic Bridging feature. When enabled, the system is managed using the IP address specified at the Management LAN port. All IP packets that are not terminated at the node will be bridged over the Management LAN." ::= { cmIpSystemScalars 9 } cmIpManagementTrafficBridgingSecurityEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the user to control the IP Management Traffic Bridging feature's security. When enables, the system supports a secure Management Traffic Bridge." ::= { cmIpSystemScalars 10 } cmIpv6PingInterface OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to specify the IPV6 Address related interface." ::= { cmIpSystemScalars 11 } cmIpv6PingDestination OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to specify the IPV6 Address to which ICMP Ping will be initiated." ::= { cmIpSystemScalars 12 } cmIpv6InitiatePingAction OBJECT-TYPE SYNTAX IpActionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to initiate ICMP Ping on cmIpv6PingDestination." ::= { cmIpSystemScalars 13 } cmIpv6TraceRouteDestination OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to specify the IPV6 Address to which Trace Route will be initiated." ::= { cmIpSystemScalars 14 } cmIpv6InitiateTraceRouteAction OBJECT-TYPE SYNTAX IpActionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to initiate TraceRoute on cmIpv6TraceRouteDestination." ::= { cmIpSystemScalars 15 } cmIpv6ProxyNDPEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object whether enabled proxy NDP." ::= { cmIpSystemScalars 16 } cmIpv6FwdEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object whether NE works in router mode or host mode. Forwarding enable:router mode, forwarding disable: host mode." ::= { cmIpSystemScalars 17 } cmIpFlushNDPCacheAction OBJECT-TYPE SYNTAX IpActionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to initiate Flush NDP action." ::= { cmIpSystemScalars 18 } cmIpPtpArpRtrvAction OBJECT-TYPE SYNTAX PtpArpActionType MAX-ACCESS read-write STATUS current DESCRIPTION "If user want to get PTP arp from cmARPEntry, user need to configure this object first." ::= { cmIpSystemScalars 19 } cmIpManagementTrafficDscpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls whether the DSCP value is modified for the transmitted management traffic whether it is locally generated or routed." ::= { cmIpSystemScalars 20 } cmIpManagementTrafficDscp OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the DSCP value and it is applicable when cmIpManagementTrafficDscpEnabled is enabled." ::= { cmIpSystemScalars 21 } cmIpManagementTrafficBridgingInterface OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the user to specify the name of the IP interface the IP address of which shall be used as the IP address of the Management Bridge." ::= { cmIpSystemScalars 22 } cmIpManagementTrafficBridgingIpv4Gateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the user to specify the IPv4 default gateway for the Management Bridge." ::= { cmIpSystemScalars 23 } cmIpManagementTrafficBridgingIpv6Gateway OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the user to specify the IPv6 default gateway for the Management Bridge." ::= { cmIpSystemScalars 24 } cmPingInterface OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to specify the IPV4 Address related interface." ::= { cmIpSystemScalars 25 } cmIpTraceRouteInterface OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to specify the IPV4 Address related interface." ::= { cmIpSystemScalars 26 } cmIpv6TraceRouteInterface OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to specify the IPV6 Address related interface." ::= { cmIpSystemScalars 27 } cmIpSNMPv1InterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the user to specify the IP interface name, which will be used in the SNMPv1 TRAP PDUs as the Agent's IP Address." ::= { cmIpSourceAddrScalars 1 } cmIpSourceAddressType OBJECT-TYPE SYNTAX IpSourceAddrType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the user to specify whether the System IP Address or the Outgoing IP Interface's Address should be used in outgoing IP PDUs." ::= { cmIpSourceAddrScalars 2 } cmIpSourceAddressInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the user to specify the IP interface name when cmIpSourceAddressType is 'systemipaddr'. The IP Address associated with the IP interface name is set as the source IP Address in outgoing PDUs." ::= { cmIpSourceAddrScalars 3 } -- FSP150 CM IP Interface Configuration Table cmIpInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF CmIpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "User managed IP Address Table." ::= { cmIpObjects 1 } cmIpInterfaceEntry OBJECT-TYPE SYNTAX CmIpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Allows management of IP Interfaces." INDEX { cmIpInterfaceName } ::= { cmIpInterfaceTable 1 } CmIpInterfaceEntry ::= SEQUENCE { cmIpInterfaceName DisplayString, cmIpInterface IpAddress, cmIpInterfaceMask IpAddress, cmIpInterfaceDhcpEnabled TruthValue, cmIpInterfaceMTU Integer32, cmIpInterfaceDhcpRole CmDhcpRole, cmIpInterfacePhysicalAddress DisplayString, cmIpInterfaceRIPv2Enabled TruthValue, cmIpInterfaceDHCPClientIdEnabled TruthValue, cmIpInterfaceDHCPClientId DisplayString, cmIpInterfaceIpMode IpMode, cmIpInterfaceDhcpClassIdEnabled TruthValue, cmIpInterfaceDhcpHostNameEnabled TruthValue, cmIpInterfaceDhcpHostName DisplayString, cmIpInterfaceDhcpLogServerEnabled TruthValue, cmIpInterfaceDhcpNTPServerEnabled TruthValue, cmIpInterfaceDhcpClientIdType DHCPCIDType, cmIpInterfaceDhcpHostNameType DHCPHostNameType, cmIpInterfaceDhcpVendorInfoEnabled TruthValue, cmIpInterfaceDhcpVendorInfoType DHCPVendorInfoType, cmIpInterfaceDhcpVendorInfo DisplayString, cmIpInterfaceDhcpVendorInfoHideControl TruthValue, cmIpInterfaceGateway IpAddress } cmIpInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the IP interface." ::= { cmIpInterfaceEntry 1 } cmIpInterface OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address of the interface." ::= { cmIpInterfaceEntry 2 } cmIpInterfaceMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Mask of the interface." ::= { cmIpInterfaceEntry 3 } cmIpInterfaceDhcpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not DHCP is enabled on this interface." ::= { cmIpInterfaceEntry 4 } cmIpInterfaceMTU OBJECT-TYPE SYNTAX Integer32 (0..1500) MAX-ACCESS read-write STATUS current DESCRIPTION "IP Interface MTU." DEFVAL { 1 } ::= { cmIpInterfaceEntry 5 } cmIpInterfaceDhcpRole OBJECT-TYPE SYNTAX CmDhcpRole MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the DHCP role on this interface." ::= { cmIpInterfaceEntry 6 } cmIpInterfacePhysicalAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Physical Address associated with the IP Address." ::= { cmIpInterfaceEntry 7 } cmIpInterfaceRIPv2Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to enable/disable RIPv2 on the IP Interface." ::= { cmIpInterfaceEntry 8 } cmIpInterfaceDHCPClientIdEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables DHCP Option 61 on the IP interface. This object is only applicable when DHCP client is enabled." ::= { cmIpInterfaceEntry 9 } cmIpInterfaceDHCPClientId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is applicable when cmIpInterfaceDHCPClientIdEnabled is set to TRUE. It allows users to specify the DHCP Client Id as a DisplayString - instead of the MAC address." ::= { cmIpInterfaceEntry 10 } cmIpInterfaceIpMode OBJECT-TYPE SYNTAX IpMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the ipmode for the interface." ::= { cmIpInterfaceEntry 11 } cmIpInterfaceDhcpClassIdEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether class id editable enabled." ::= { cmIpInterfaceEntry 12 } cmIpInterfaceDhcpHostNameEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether host name editable enabled." ::= { cmIpInterfaceEntry 13 } cmIpInterfaceDhcpHostName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe the host name." ::= { cmIpInterfaceEntry 14 } cmIpInterfaceDhcpLogServerEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether the dhcp log server enabled." ::= { cmIpInterfaceEntry 15 } cmIpInterfaceDhcpNTPServerEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether the dhcp ntp server enabled." ::= { cmIpInterfaceEntry 16 } cmIpInterfaceDhcpClientIdType OBJECT-TYPE SYNTAX DHCPCIDType MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether the dhcp cid type." ::= { cmIpInterfaceEntry 17 } cmIpInterfaceDhcpHostNameType OBJECT-TYPE SYNTAX DHCPHostNameType MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether the dhcp host name type." ::= { cmIpInterfaceEntry 18 } cmIpInterfaceDhcpVendorInfoEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the vendor information whether enabled." ::= { cmIpInterfaceEntry 19 } cmIpInterfaceDhcpVendorInfoType OBJECT-TYPE SYNTAX DHCPVendorInfoType MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether the dhcp vendor information type." ::= { cmIpInterfaceEntry 20 } cmIpInterfaceDhcpVendorInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe the vendor information." ::= { cmIpInterfaceEntry 21 } cmIpInterfaceDhcpVendorInfoHideControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether the dhcp vendor info is hidden or not" ::= { cmIpInterfaceEntry 22 } cmIpInterfaceGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object desribes the IPv4 Gateway Address of the management interface on OSA540X." ::= { cmIpInterfaceEntry 23 } -- FSP150 CM Static Routes Configuration Table cmStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF CmStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's user configured Static IP Routing table." ::= { cmIpObjects 2 } cmStaticRouteEntry OBJECT-TYPE SYNTAX CmStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular route to a particular destina- tion, under a particular policy." INDEX { cmStaticRouteDest, cmStaticRouteMask, cmStaticRouteNextHop, cmStaticRouteInterface } ::= { cmStaticRouteTable 1 } CmStaticRouteEntry ::= SEQUENCE { cmStaticRouteDest IpAddress, cmStaticRouteMask IpAddress, cmStaticRouteNextHop IpAddress, cmStaticRouteMetric Integer32, cmStaticRouteRowStatus RowStatus, cmStaticRouteInterface DisplayString, cmStaticRouteAdvertise TruthValue } cmStaticRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the cmStaticRouteMask object is not equal to x." ::= { cmStaticRouteEntry 1 } cmStaticRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the cmStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the cmStaticRouteMask by reference to the IP Ad- dress Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the cmStaticRouteDest object is not equal to cmStaticRouteDest." ::= { cmStaticRouteEntry 2 } cmStaticRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0." ::= { cmStaticRouteEntry 3 } cmStaticRouteMetric OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's cmStaticRouteProto value. If this metric is not used, its value should be set to 1." DEFVAL { 1 } ::= { cmStaticRouteEntry 4 } cmStaticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { cmStaticRouteEntry 5 } cmStaticRouteInterface OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the IP interface for the interface static route." ::= { cmStaticRouteEntry 6 } cmStaticRouteAdvertise OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether this static route will be advertised via routing protocol." ::= { cmStaticRouteEntry 7 } -- -- FSP150 CM IP ARP Table -- cmARPTable OBJECT-TYPE SYNTAX SEQUENCE OF CmARPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of ARP entries on the NIDs." ::= { cmIpObjects 3 } cmARPEntry OBJECT-TYPE SYNTAX CmARPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmARPTable. Entries can be created/deleted in this table by management application action." INDEX { cmARPInterface, cmARPIPAddress } ::= { cmARPTable 1 } CmARPEntry ::= SEQUENCE { cmARPIndex Integer32, cmARPIPAddress IpAddress, cmARPMacAddress MacAddress, cmARPInterface DisplayString, cmARPStorageType StorageType, cmARPRowStatus RowStatus, cmARPEntryType IpEntryType } cmARPIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "An integer index value used to uniquely identify this ARP Entry in the cmARPTable." ::= { cmARPEntry 1 } cmARPIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows configuration of the ARP Entry IP Address." ::= { cmARPEntry 2 } cmARPMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows management of the ARP Entry MAC Address." ::= { cmARPEntry 3 } cmARPInterface OBJECT-TYPE SYNTAX DisplayString (SIZE (1..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows management of the ARP Entry Interface." ::= { cmARPEntry 4 } cmARPStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmARPEntry 5 } cmARPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row. The cmARPRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3)." ::= { cmARPEntry 6 } cmARPEntryType OBJECT-TYPE SYNTAX IpEntryType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of ARP Entry. Note that static entries can be created." ::= { cmARPEntry 7 } -- -- FSP150 CM Proxy ARP Table -- cmProxyARPTable OBJECT-TYPE SYNTAX SEQUENCE OF CmProxyARPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Proxy ARP entries on the NIDs. This table is not supported in GE206 Release 4.1CC." ::= { cmIpObjects 4 } cmProxyARPEntry OBJECT-TYPE SYNTAX CmProxyARPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmProxyARPTable. Entries can be created/deleted in this table by management application action." INDEX { cmProxyARPInterface, cmProxyARPIPAddress, cmProxyARPSubnetMask } ::= { cmProxyARPTable 1 } CmProxyARPEntry ::= SEQUENCE { cmProxyARPIndex Integer32, cmProxyARPIPAddress IpAddress, cmProxyARPSubnetMask IpAddress, cmProxyARPInterface DisplayString, cmProxyARPStorageType StorageType, cmProxyARPRowStatus RowStatus } cmProxyARPIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "An integer index value used to uniquely identify this Proxy ARP Entry in the cmProxyARPTable." ::= { cmProxyARPEntry 1 } cmProxyARPIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows configuration of the ProxyARP Entry IP Address." ::= { cmProxyARPEntry 2 } cmProxyARPSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows management of the Proxy ARP Entry Subnet Mask." ::= { cmProxyARPEntry 3 } cmProxyARPInterface OBJECT-TYPE SYNTAX DisplayString (SIZE (1..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows management of the Proxy ARP Entry Interface." ::= { cmProxyARPEntry 4 } cmProxyARPStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmProxyARPEntry 5 } cmProxyARPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row. The cmProxyARPRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3)." ::= { cmProxyARPEntry 6 } -- -- FSP150 IP Management Tunnel Table -- ipManagementTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF IpManagementTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of IP Management Tunnel entries on the fsp150 family of products." ::= { cmIpObjects 5 } ipManagementTunnelEntry OBJECT-TYPE SYNTAX IpManagementTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the ipManagementTunnelTable. Entries can be created/deleted in this table by management application action." INDEX { ipManagementTunnelIndex } ::= { ipManagementTunnelTable 1 } IpManagementTunnelEntry ::= SEQUENCE { ipManagementTunnelIndex Integer32, ipManagementTunnelAssociatedPort VariablePointer, ipManagementTunnelName DisplayString, ipManagementTunnelType IpManagementTunnelType, ipManagementTunnelMTU Integer32, ipManagementTunnelEncapsulationType IpManagementTunnelEncapsulationType, ipManagementTunnelIpAddress IpAddress, ipManagementTunnelSubnetMask IpAddress, ipManagementTunnelVlanId VlanId, ipManagementTunnelSVlanEnabled TruthValue, ipManagementTunnelSVlanId VlanId, ipManagementTunnelDhcpEnabled TruthValue, ipManagementTunnelRip2PktsEnabled TruthValue, ipManagementTunnelPhysicalAddress DisplayString, ipManagementTunnelCOS Integer32, ipManagementTunnelCIR Unsigned32, ipManagementTunnelEIR Unsigned32, ipManagementTunnelBufferSize Unsigned32, ipManagementTunnelStorageType StorageType, ipManagementTunnelRowStatus RowStatus, ipManagementTunnelDHCPClientIdEnabled TruthValue, ipManagementTunnelDHCPClientId DisplayString, ipManagementTunnelQosQueueProfile VariablePointer, ipManagementTunnelCVlanEnabled TruthValue, ipManagementTunnelDHCPv6Enabled TruthValue, ipManagementTunnelIpv6Address Ipv6Address, ipManagementTunnelIpv6AddrPrefixLen Integer32, ipManagementTunnelIpv6StateAddrAutoConfigEnabled TruthValue, ipManagementTunnellinkLocIpv6Addr Ipv6Address, ipManagementTunnellinkLocIpv6AddrPrefixLen Integer32, ipManagementTunnelIpv6PrefixAdvertiseEnabled TruthValue, ipManagementTunnelIpv6Prefix Ipv6Address, ipManagementTunnelIpv6PrefixLen Integer32, ipManagementTunnelIpMode IpMode, ipManagementTunnelIpv6RipngEnabled TruthValue, ipManagementTunnelDhcpClassIdEnabled TruthValue, ipManagementTunnelDhcpHostNameEnabled TruthValue, ipManagementTunnelDhcpHostName DisplayString, ipManagementTunnelDhcpLogServerEnabled TruthValue, ipManagementTunnelDhcpNTPServerEnabled TruthValue, ipManagementTunnelDhcpClientIdType DHCPCIDType, ipManagementTunnelDhcpHostNameType DHCPHostNameType, ipManagementTunnelDhcpVendorInfoEnabled TruthValue, ipManagementTunnelDhcpVendorInfoType DHCPVendorInfoType, ipManagementTunnelDhcpVendorInfo DisplayString, ipManagementTunnelDhcpVendorInfoHideControl TruthValue, ipManagementTunnelSharedVim TruthValue } ipManagementTunnelIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "A unique integer index value used to uniquely identify a Management Tunnel Entry in the ipManagementTunnelTable." ::= { ipManagementTunnelEntry 1 } ipManagementTunnelAssociatedPort OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This allows specification of the associated physical port on the device, to which the Management Tunnel is attached." ::= { ipManagementTunnelEntry 2 } ipManagementTunnelName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "This allows specification of a unique name which is also used as the name of the IP interface, to which the Management Tunnel is attached." ::= { ipManagementTunnelEntry 3 } ipManagementTunnelType OBJECT-TYPE SYNTAX IpManagementTunnelType MAX-ACCESS read-create STATUS current DESCRIPTION "This allows specification of the type of management tunnel, whether it is a VLAN based tunnel or a MAC based tunnel." ::= { ipManagementTunnelEntry 4 } ipManagementTunnelMTU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This provides the MTU of the Management Tunnel." ::= { ipManagementTunnelEntry 5 } ipManagementTunnelEncapsulationType OBJECT-TYPE SYNTAX IpManagementTunnelEncapsulationType MAX-ACCESS read-create STATUS current DESCRIPTION "This allows specification of the encapsulation type of management tunnel. Only Ethernet encapsulation is currently supported." ::= { ipManagementTunnelEntry 6 } ipManagementTunnelIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows configuration of the Management Tunnel IP Address." ::= { ipManagementTunnelEntry 7 } ipManagementTunnelSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows management of the Management Tunnel Subnet Mask." ::= { ipManagementTunnelEntry 8 } ipManagementTunnelVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the VLAN Id in the case of a VLAN management tunnel. This object is not relevant for a MAC based management tunnel." ::= { ipManagementTunnelEntry 9 } ipManagementTunnelSVlanEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of whether or not the S-TAG is enabled on the IP Management Tunnel. This object is not relevant for a MAC based management tunnel." ::= { ipManagementTunnelEntry 10 } ipManagementTunnelSVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the S-TAG VLAN Id in the case of a VLAN management tunnel, when S-TAG is also enabled. This object is not relevant for a MAC based management tunnel, as well as when the ipManagementTunnelSVlanEnabled is set to false." ::= { ipManagementTunnelEntry 11 } ipManagementTunnelDhcpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of whether or not DHCP is enabled on the IP Management Tunnel." ::= { ipManagementTunnelEntry 12 } ipManagementTunnelRip2PktsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of whether or not RIP2 is enabled on the IP Management Tunnel." ::= { ipManagementTunnelEntry 13 } ipManagementTunnelPhysicalAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the physical address (MAC Address) associated with the IP Management Tunnel." ::= { ipManagementTunnelEntry 14 } ipManagementTunnelCOS OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Class of Service associated with the IP Management Tunnel. This value is also used in the p-bits of the VLAN based management tunnels (for both VLANs in case S-TAG is enabled)." ::= { ipManagementTunnelEntry 15 } ipManagementTunnelCIR OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Management Tunnel CIR." ::= { ipManagementTunnelEntry 16 } ipManagementTunnelEIR OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Management Tunnel EIR." ::= { ipManagementTunnelEntry 17 } ipManagementTunnelBufferSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Management Tunnel Buffer Size." ::= { ipManagementTunnelEntry 18 } ipManagementTunnelStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { ipManagementTunnelEntry 19 } ipManagementTunnelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row. The ipManagementTunnelRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3)." ::= { ipManagementTunnelEntry 20 } ipManagementTunnelDHCPClientIdEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables DHCP Option 61 on the Management Tunnel. This object is only applicable when DHCP client is enabled." ::= { ipManagementTunnelEntry 21 } ipManagementTunnelDHCPClientId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is applicable when ipManagementTunnelDHCPClientIdEnabled is set to TRUE. It allows users to specify the DHCP Client Id as a DisplayString - instead of the MAC address." ::= { ipManagementTunnelEntry 22 } ipManagementTunnelQosQueueProfile OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the OID of cmQosQueueProfileIndex in the cmQosQueueProfileTable." ::= { ipManagementTunnelEntry 23 } ipManagementTunnelCVlanEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object CTAG whether enabled, By default it is enabled." ::= { ipManagementTunnelEntry 24 } ipManagementTunnelDHCPv6Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object DHCPv6 whether enabled, By default it is enabled." ::= { ipManagementTunnelEntry 25 } ipManagementTunnelIpv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the unicast ipv6 address." ::= { ipManagementTunnelEntry 26 } ipManagementTunnelIpv6AddrPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the unicast ipv6 address prefix length." ::= { ipManagementTunnelEntry 27 } ipManagementTunnelIpv6StateAddrAutoConfigEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object Ipv6StateAddrAutoConfig whether enabled, By default it is enabled." ::= { ipManagementTunnelEntry 28 } ipManagementTunnellinkLocIpv6Addr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "This object means the link local ipv6 address." ::= { ipManagementTunnelEntry 29 } ipManagementTunnellinkLocIpv6AddrPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "This object means the link local ipv6 address prefix length." ::= { ipManagementTunnelEntry 30 } ipManagementTunnelIpv6PrefixAdvertiseEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the prefix advertise whether enabled." ::= { ipManagementTunnelEntry 31 } ipManagementTunnelIpv6Prefix OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the prefix ipv6 address." ::= { ipManagementTunnelEntry 32 } ipManagementTunnelIpv6PrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the link local ipv6 address prefix length." ::= { ipManagementTunnelEntry 33 } ipManagementTunnelIpMode OBJECT-TYPE SYNTAX IpMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the ip mode for the management tunnel." ::= { ipManagementTunnelEntry 34 } ipManagementTunnelIpv6RipngEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the ipv6's Ripng whether enabled." ::= { ipManagementTunnelEntry 35 } ipManagementTunnelDhcpClassIdEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the class id whether enabled." ::= { ipManagementTunnelEntry 36 } ipManagementTunnelDhcpHostNameEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the host name whether enabled." ::= { ipManagementTunnelEntry 37 } ipManagementTunnelDhcpHostName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe the host name." ::= { ipManagementTunnelEntry 38 } ipManagementTunnelDhcpLogServerEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether the dhcp log server enabled." ::= { ipManagementTunnelEntry 39 } ipManagementTunnelDhcpNTPServerEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether the dhcp ntp server enabled." ::= { ipManagementTunnelEntry 40 } ipManagementTunnelDhcpClientIdType OBJECT-TYPE SYNTAX DHCPCIDType MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether the dhcp cid type." ::= { ipManagementTunnelEntry 41 } ipManagementTunnelDhcpHostNameType OBJECT-TYPE SYNTAX DHCPHostNameType MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether the dhcp host name type." ::= { ipManagementTunnelEntry 42 } ipManagementTunnelDhcpVendorInfoEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the vendor information whether enabled." ::= { ipManagementTunnelEntry 43 } ipManagementTunnelDhcpVendorInfoType OBJECT-TYPE SYNTAX DHCPVendorInfoType MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether the dhcp vendor information type." ::= { ipManagementTunnelEntry 44 } ipManagementTunnelDhcpVendorInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe the vendor information." ::= { ipManagementTunnelEntry 45 } ipManagementTunnelDhcpVendorInfoHideControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether the dhcp vendor info is hidden or not." ::= { ipManagementTunnelEntry 46 } ipManagementTunnelSharedVim OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes if tunnel share vlan with vim tunnel." ::= { ipManagementTunnelEntry 47 } cmIpv6InterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF CmIpv6InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "User managed IPv6 Address Table." ::= { cmIpObjects 6 } cmIpv6InterfaceEntry OBJECT-TYPE SYNTAX CmIpv6InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Allows management of IPv6 Interfaces." AUGMENTS { cmIpInterfaceEntry } ::= { cmIpv6InterfaceTable 1 } CmIpv6InterfaceEntry ::= SEQUENCE { cmIpv6InterfaceMTU Integer32, cmIpv6UnicastAddr Ipv6Address, cmIpv6UnicastAddrPrefixLen Integer32, cmIpv6PrefixAdvertiseEnabled TruthValue, cmIpv6RAPrefix Ipv6Address, cmIpv6RAPrefixLength Integer32, cmIpv6StateAddrAutoConfigEnabled TruthValue, cmIpv6DhcpEnabled TruthValue, cmIpv6DhcpRole CmDhcpRole, cmIpv6RIPngEnabled TruthValue, cmIpv6LinkLocAddr Ipv6Address, cmIpv6LinkLocAddrPrefixLen Integer32, cmIpv6InterfaceGateway Ipv6Address } cmIpv6InterfaceMTU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe the MTU for ipv6 address interface." ::= { cmIpv6InterfaceEntry 1 } cmIpv6UnicastAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe IPv6 Unicast Address together with Prefix." ::= { cmIpv6InterfaceEntry 2 } cmIpv6UnicastAddrPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe prefix length of unicast address." ::= { cmIpv6InterfaceEntry 3 } cmIpv6PrefixAdvertiseEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether to advertise prefix to link in router mode." ::= { cmIpv6InterfaceEntry 4 } cmIpv6RAPrefix OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe the IPv6 Prefix to be dispatched to link in Router mode." ::= { cmIpv6InterfaceEntry 5 } cmIpv6RAPrefixLength OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe Length of RA prefix." ::= { cmIpv6InterfaceEntry 6 } cmIpv6StateAddrAutoConfigEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether enable or disable stateless address auto configuration." ::= { cmIpv6InterfaceEntry 7 } cmIpv6DhcpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether dhcp is enabled on the ipv6 interface." ::= { cmIpv6InterfaceEntry 8 } cmIpv6DhcpRole OBJECT-TYPE SYNTAX CmDhcpRole MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe the dhcp role." ::= { cmIpv6InterfaceEntry 9 } cmIpv6RIPngEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe RIPng whether enabled." ::= { cmIpv6InterfaceEntry 10 } cmIpv6LinkLocAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "This object describe Automatically generated Link-local Address." ::= { cmIpv6InterfaceEntry 11} cmIpv6LinkLocAddrPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-only STATUS current DESCRIPTION "This object describe Length of link local IPv6 address prefix." ::= { cmIpv6InterfaceEntry 12 } cmIpv6InterfaceGateway OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the IPv6 Gateway address for the management interface on OSA540X." ::= { cmIpv6InterfaceEntry 13 } -- FSP150 CM IPv6 Static Routes Configuration Table cmIpv6StaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF CmIpv6StaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's user configured Static Ipv6 Routing table." ::= { cmIpObjects 7 } cmIpv6StaticRouteEntry OBJECT-TYPE SYNTAX CmIpv6StaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular route to a particular destina- tion, under a particular policy." INDEX { cmIpv6StaticRouteDest, cmIpv6StaticRoutePrefixLen, cmIpv6StaticRouteNextHop, cmIpv6StaticRouteInterface } ::= { cmIpv6StaticRouteTable 1 } CmIpv6StaticRouteEntry ::= SEQUENCE { cmIpv6StaticRouteDest Ipv6Address, cmIpv6StaticRoutePrefixLen Integer32, cmIpv6StaticRouteNextHop Ipv6Address, cmIpv6StaticRouteMetric Integer32, cmIpv6StaticRouteRowStatus RowStatus, cmIpv6StaticRouteInterface DisplayString, cmIpv6StaticRouteAdvertise TruthValue } cmIpv6StaticRouteDest OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination Ipv6 address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the cmIpv6StaticRouteMask object is not equal to x." ::= { cmIpv6StaticRouteEntry 1 } cmIpv6StaticRoutePrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the cmIpv6StaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the cmIpv6StaticRoutePrefixLen by reference to the IP Ad- dress Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the cmIpv6StaticRouteDest object is not equal to cmIpv6StaticRouteDest." ::= { cmIpv6StaticRouteEntry 2 } cmIpv6StaticRouteNextHop OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0." ::= { cmIpv6StaticRouteEntry 3 } cmIpv6StaticRouteMetric OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's cmIpv6StaticRouteProto value. If this metric is not used, its value should be set to 1." DEFVAL { 1 } ::= { cmIpv6StaticRouteEntry 4 } cmIpv6StaticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { cmIpv6StaticRouteEntry 5 } cmIpv6StaticRouteInterface OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the Ipv6 interface for the interface static route." ::= { cmIpv6StaticRouteEntry 6 } cmIpv6StaticRouteAdvertise OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Whether this static route will be advertised via routing protocol." ::= { cmIpv6StaticRouteEntry 7 } -- -- FSP150 CM IPV6 NDP Table -- cmNDPTable OBJECT-TYPE SYNTAX SEQUENCE OF CmNDPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of NDP entries on the NIDs." ::= { cmIpObjects 8 } cmNDPEntry OBJECT-TYPE SYNTAX CmNDPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmNDPTable. Entries can be created/deleted in this table by management application action." INDEX { cmNDPInterface, cmNDPIpv6Address } ::= { cmNDPTable 1 } CmNDPEntry ::= SEQUENCE { cmNDPIpv6Address Ipv6Address, cmNDPMacAddress MacAddress, cmNDPInterface DisplayString, cmNDPStorageType StorageType, cmNDPRowStatus RowStatus, cmNDPEntryType IpEntryType } cmNDPIpv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object allows configuration of the NDP Entry IP Address." ::= { cmNDPEntry 1 } cmNDPMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows management of the NDP Entry MAC Address." ::= { cmNDPEntry 2 } cmNDPInterface OBJECT-TYPE SYNTAX DisplayString (SIZE (1..15)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object allows management of the NDP Entry Interface." ::= { cmNDPEntry 3 } cmNDPStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmNDPEntry 4 } cmNDPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row. The cmNDPRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3)." ::= { cmNDPEntry 5 } cmNDPEntryType OBJECT-TYPE SYNTAX IpEntryType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of NDP Entry. Note that static entries can be created." ::= { cmNDPEntry 6 } -- -- FSP150 CM Proxy NDP Table -- cmProxyNDPTable OBJECT-TYPE SYNTAX SEQUENCE OF CmProxyNDPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Proxy NDP entries on the NIDs. This table is not supported in GE206 Release 4.1CC." ::= { cmIpObjects 9 } cmProxyNDPEntry OBJECT-TYPE SYNTAX CmProxyNDPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmProxyNDPTable. Entries can be created/deleted in this table by management application action." INDEX { cmProxyNDPInterface, cmProxyNDPIpv6Address, cmProxyNDPIpv6PrefixLen } ::= { cmProxyNDPTable 1 } CmProxyNDPEntry ::= SEQUENCE { cmProxyNDPIpv6Address Ipv6Address, cmProxyNDPIpv6PrefixLen Integer32, cmProxyNDPInterface DisplayString, cmProxyNDPStorageType StorageType, cmProxyNDPRowStatus RowStatus } cmProxyNDPIpv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object allows configuration of the ProxyNDP Entry IP Address." ::= { cmProxyNDPEntry 1 } cmProxyNDPIpv6PrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object allows management of the Proxy NDP Entry Subnet Mask." ::= { cmProxyNDPEntry 2 } cmProxyNDPInterface OBJECT-TYPE SYNTAX DisplayString (SIZE (1..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows management of the Proxy NDP Entry Interface." ::= { cmProxyNDPEntry 3 } cmProxyNDPStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmProxyNDPEntry 4 } cmProxyNDPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row. The cmProxyNDPRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3)." ::= { cmProxyNDPEntry 5 } -- -- FSP150 CM IPV6 OVER IPV4 TUNNEL Table -- cmIpv6OverIpv4TunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF CmIpv6OverIpv4TunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Ipv6OverIpv4Tunnel entries on the NIDs." ::= { cmIpObjects 10 } cmIpv6OverIpv4TunnelEntry OBJECT-TYPE SYNTAX CmIpv6OverIpv4TunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmIpv6OverIpv4TunnelTable. Entries can be created/deleted in this table by management application action." INDEX { cmIpv6OverIpv4TunnelIndex } ::= { cmIpv6OverIpv4TunnelTable 1 } CmIpv6OverIpv4TunnelEntry ::= SEQUENCE { cmIpv6OverIpv4TunnelIndex Integer32, cmIpv6OverIpv4TunnelName DisplayString, cmIpv6OverIpv4TunnelType Ipv6OverIpv4TunnelType, cmIpv6OverIpv4TunnelDestIpv4Addr IpAddress, cmIpv6OverIpv4TunnelIpv6UnicastAddress Ipv6Address, cmIpv6OverIpv4TunnelIpv6UnicastAddrPrefixLen Integer32, cmIpv6OverIpv4TunnelLinkLocalAddress Ipv6Address, cmIpv60verIpv4TunnelLinkLocalAddrPrefixLen Integer32, cmIpv6OverIpv4TunnelAssociatedIpv4Interface VariablePointer, cmIpv6OverIpv4TunnelStorageType StorageType, cmIpv6OverIpv4TunnelRowStatus RowStatus, cmIpv6OverIpv4PotentialRouterList DisplayString } cmIpv6OverIpv4TunnelIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify this Ipv6OverIpv4TunnelEntry in the cmIpv6OverIpv4TunnelTable." ::= { cmIpv6OverIpv4TunnelEntry 1 } cmIpv6OverIpv4TunnelName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe the tunnel name." ::= { cmIpv6OverIpv4TunnelEntry 2 } cmIpv6OverIpv4TunnelType OBJECT-TYPE SYNTAX Ipv6OverIpv4TunnelType MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe the tunnel type." ::= { cmIpv6OverIpv4TunnelEntry 3 } cmIpv6OverIpv4TunnelDestIpv4Addr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe Destination IPv4 address. Only applicable for configured tunnel." ::= { cmIpv6OverIpv4TunnelEntry 4 } cmIpv6OverIpv4TunnelIpv6UnicastAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe Source IPv6 address used to transmit IPv6 packets on tunnel. Only writable for Configured Tunnel, read-only for other types of Tunnels." ::= { cmIpv6OverIpv4TunnelEntry 5 } cmIpv6OverIpv4TunnelIpv6UnicastAddrPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe the prefix length for the unicast ipv6 address." ::= { cmIpv6OverIpv4TunnelEntry 6 } cmIpv6OverIpv4TunnelLinkLocalAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "This object describe the link local adderss." ::= { cmIpv6OverIpv4TunnelEntry 7 } cmIpv60verIpv4TunnelLinkLocalAddrPrefixLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object describe the prefix length for link local address." ::= { cmIpv6OverIpv4TunnelEntry 8 } cmIpv6OverIpv4TunnelAssociatedIpv4Interface OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "the IPv4 Interface that Tunnel is created on, which could be DCN or Management tunnel." ::= { cmIpv6OverIpv4TunnelEntry 9 } cmIpv6OverIpv4TunnelStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmIpv6OverIpv4TunnelEntry 10 } cmIpv6OverIpv4TunnelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row. The cmIpv6OverIpv4TunnelRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3)." ::= { cmIpv6OverIpv4TunnelEntry 11 } cmIpv6OverIpv4PotentialRouterList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "This object describe the potential router list. And its format should be like 'a.b.c.d,e.f.g.h', split by ',' and no breakspace there." ::= { cmIpv6OverIpv4TunnelEntry 12 } -- -- FSP150 IP loopback interface Table -- ipLoopbackInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF IpLoopbackInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of loopback interace entries in the management plane." ::= { cmIpObjects 11 } ipLoopbackInterfaceEntry OBJECT-TYPE SYNTAX IpLoopbackInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the ipLoopbackInterfaceTable. Entries can be created/deleted in this table by management application action." INDEX { ipLoopbackInterfaceIndex } ::= { ipLoopbackInterfaceTable 1 } IpLoopbackInterfaceEntry ::= SEQUENCE { ipLoopbackInterfaceIndex Integer32, ipLoopbackInterfaceName DisplayString, ipLoopbackInterfaceIpAddress IpAddress, ipLoopbackInterfaceMask IpAddress, ipLoopbackInterfaceStorageType StorageType, ipLoopbackInterfaceRowStatus RowStatus, ipLoopbackInterfaceIpMode IpMode, ipLoopbackInterfaceIpv6Address Ipv6Address, ipLoopbackInterfaceIpv6AddrPrefixLen Integer32 } ipLoopbackInterfaceIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique integer index value used to uniquely identify a Loopback Interface Entry in the ipLoopbackInterfaceTable." ::= { ipLoopbackInterfaceEntry 1 } ipLoopbackInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "This allows specification of a unique name which is also used as the name of the IP interface." ::= { ipLoopbackInterfaceEntry 2 } ipLoopbackInterfaceIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to specify the IP Address of the interface." ::= { ipLoopbackInterfaceEntry 3 } ipLoopbackInterfaceMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to specify the IP mask of the interface." ::= { ipLoopbackInterfaceEntry 4 } ipLoopbackInterfaceStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { ipLoopbackInterfaceEntry 5 } ipLoopbackInterfaceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ipLoopbackInterfaceRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ipLoopbackInterfaceRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ipLoopbackInterfaceRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { ipLoopbackInterfaceEntry 6 } ipLoopbackInterfaceIpMode OBJECT-TYPE SYNTAX IpMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the ip mode for the interface." ::= { ipLoopbackInterfaceEntry 7 } ipLoopbackInterfaceIpv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the ipv6 address for the interface." ::= { ipLoopbackInterfaceEntry 8 } ipLoopbackInterfaceIpv6AddrPrefixLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the ipv6 address prefix length for the interface." ::= { ipLoopbackInterfaceEntry 9 } -- -- Conformance Section -- ipCompliances OBJECT IDENTIFIER ::= { cmIpConformance 1 } ipGroups OBJECT IDENTIFIER ::= { cmIpConformance 2 } ipCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Describes the requirements for compliance to the IP Module." MODULE -- this module MANDATORY-GROUPS { ipGroup } ::= { ipCompliances 1 } ipGroup OBJECT-GROUP OBJECTS { cmIpFlushARPCacheAction, cmIpProxyARPEnabled, cmIpPingDestination, cmIpInitiatePingAction, cmIpPingResult, cmPingInterface, cmIpTraceRouteDestination, cmIpInitiateTraceRouteAction, cmIpTraceRouteResult, cmIpTraceRouteInterface, cmIpSNMPv1InterfaceName, cmIpSourceAddressType, cmIpSourceAddressInterfaceName, cmIpManagementTrafficBridgingEnabled, cmIpManagementTrafficBridgingSecurityEnabled, cmIpInterfaceName, cmIpInterface, cmIpInterfaceMask, cmIpInterfaceDhcpEnabled, cmIpInterfaceMTU, cmIpInterfaceDhcpRole, cmIpInterfacePhysicalAddress, cmIpInterfaceRIPv2Enabled, cmIpInterfaceDHCPClientIdEnabled, cmIpInterfaceDHCPClientId, cmIpInterfaceIpMode, cmIpInterfaceDhcpClassIdEnabled, cmIpInterfaceDhcpHostNameEnabled, cmIpInterfaceDhcpHostName, cmIpInterfaceDhcpLogServerEnabled, cmIpInterfaceDhcpNTPServerEnabled, cmIpInterfaceDhcpClientIdType, cmIpInterfaceDhcpHostNameType, cmIpInterfaceDhcpVendorInfoEnabled, cmIpInterfaceDhcpVendorInfoType, cmIpInterfaceDhcpVendorInfo, cmIpInterfaceDhcpVendorInfoHideControl, cmIpInterfaceGateway, cmStaticRouteDest, cmStaticRouteMask, cmStaticRouteNextHop, cmStaticRouteMetric, cmStaticRouteRowStatus, cmStaticRouteInterface, cmStaticRouteAdvertise, cmARPIndex, cmARPIPAddress, cmARPMacAddress, cmARPInterface, cmARPStorageType, cmARPRowStatus, cmARPEntryType, cmProxyARPIndex, cmProxyARPIPAddress, cmProxyARPSubnetMask, cmProxyARPInterface, cmProxyARPStorageType, cmProxyARPRowStatus, ipManagementTunnelIndex, ipManagementTunnelAssociatedPort, ipManagementTunnelName, ipManagementTunnelType, ipManagementTunnelMTU, ipManagementTunnelEncapsulationType, ipManagementTunnelIpAddress, ipManagementTunnelSubnetMask, ipManagementTunnelVlanId, ipManagementTunnelSVlanEnabled, ipManagementTunnelSVlanId, ipManagementTunnelDhcpEnabled, ipManagementTunnelRip2PktsEnabled, ipManagementTunnelPhysicalAddress, ipManagementTunnelCOS, ipManagementTunnelCIR, ipManagementTunnelEIR, ipManagementTunnelBufferSize, ipManagementTunnelStorageType, ipManagementTunnelRowStatus, ipManagementTunnelQosQueueProfile, ipManagementTunnelDHCPClientIdEnabled, ipManagementTunnelDHCPClientId, ipManagementTunnelCVlanEnabled, ipManagementTunnelIpMode, ipManagementTunnelDhcpClassIdEnabled, ipManagementTunnelDhcpHostNameEnabled, ipManagementTunnelDhcpHostName, ipManagementTunnelDhcpLogServerEnabled, ipManagementTunnelDhcpNTPServerEnabled, ipManagementTunnelDhcpClientIdType, ipManagementTunnelDhcpHostNameType, cmIpManagementTrafficDscpEnabled, cmIpManagementTrafficDscp, cmIpManagementTrafficBridgingInterface, cmIpManagementTrafficBridgingIpv4Gateway, cmIpManagementTrafficBridgingIpv6Gateway, ipManagementTunnelDhcpVendorInfoEnabled, ipManagementTunnelDhcpVendorInfoType, ipManagementTunnelDhcpVendorInfo, ipManagementTunnelDhcpVendorInfoHideControl, ipManagementTunnelSharedVim } STATUS current DESCRIPTION "A collection of objects used to manage the FSP150CM IP Services." ::= { ipGroups 1 } ipv6Group OBJECT-GROUP OBJECTS { ipManagementTunnelDHCPv6Enabled, ipManagementTunnelIpv6Address, ipManagementTunnelIpv6AddrPrefixLen, ipManagementTunnelIpv6StateAddrAutoConfigEnabled, ipManagementTunnellinkLocIpv6Addr, ipManagementTunnellinkLocIpv6AddrPrefixLen, ipManagementTunnelIpv6PrefixAdvertiseEnabled, ipManagementTunnelIpv6Prefix, ipManagementTunnelIpv6PrefixLen, ipManagementTunnelIpv6RipngEnabled, cmIpv6InterfaceMTU, cmIpv6UnicastAddr, cmIpv6UnicastAddrPrefixLen, cmIpv6PrefixAdvertiseEnabled, cmIpv6RAPrefix, cmIpv6RAPrefixLength, cmIpv6StateAddrAutoConfigEnabled, cmIpv6DhcpEnabled, cmIpv6DhcpRole, cmIpv6RIPngEnabled, cmIpv6LinkLocAddr, cmIpv6LinkLocAddrPrefixLen, cmIpv6InterfaceGateway, cmIpv6StaticRouteDest, cmIpv6StaticRoutePrefixLen, cmIpv6StaticRouteNextHop, cmIpv6StaticRouteMetric, cmIpv6StaticRouteRowStatus, cmIpv6StaticRouteInterface, cmIpv6StaticRouteAdvertise, cmNDPIpv6Address, cmNDPMacAddress, cmNDPInterface, cmNDPStorageType, cmNDPRowStatus, cmNDPEntryType, cmProxyNDPIpv6Address, cmProxyNDPIpv6PrefixLen, cmProxyNDPInterface, cmProxyNDPStorageType, cmProxyNDPRowStatus, cmIpv6OverIpv4TunnelIndex, cmIpv6OverIpv4TunnelName, cmIpv6OverIpv4TunnelType, cmIpv6OverIpv4TunnelDestIpv4Addr, cmIpv6OverIpv4TunnelIpv6UnicastAddress, cmIpv6OverIpv4TunnelAssociatedIpv4Interface, cmIpv6OverIpv4TunnelStorageType, cmIpv6OverIpv4TunnelRowStatus, cmIpv6InitiatePingAction, cmIpv6InitiatePingAction, cmIpv6TraceRouteDestination, cmIpv6InitiateTraceRouteAction, cmIpv6PingInterface, cmIpv6OverIpv4TunnelIpv6UnicastAddrPrefixLen, cmIpv6OverIpv4TunnelLinkLocalAddress, cmIpv60verIpv4TunnelLinkLocalAddrPrefixLen, cmIpv6OverIpv4PotentialRouterList, cmIpv6FwdEnabled, cmIpv6ProxyNDPEnabled, cmIpFlushNDPCacheAction, cmIpPtpArpRtrvAction, ipLoopbackInterfaceIndex,ipLoopbackInterfaceName,ipLoopbackInterfaceIpAddress, ipLoopbackInterfaceMask,ipLoopbackInterfaceStorageType,ipLoopbackInterfaceRowStatus, ipLoopbackInterfaceIpMode,ipLoopbackInterfaceIpv6Address, ipLoopbackInterfaceIpv6AddrPrefixLen } STATUS current DESCRIPTION "A collection of objects used to manage the FSP150CM IPv6 Services." ::= { ipGroups 2 } END