CM-REDUNDANCY-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MODULE-IDENTITY, OBJECT-TYPE, Counter32, TimeTicks, Integer32 FROM SNMPv2-SMI DisplayString, TruthValue, RowStatus, StorageType, VariablePointer, TEXTUAL-CONVENTION FROM SNMPv2-TC fsp150cm FROM ADVA-MIB PhysicalIndex FROM ENTITY-MIB neIndex, CardType FROM CM-ENTITY-MIB; cmRedundancyMIB MODULE-IDENTITY LAST-UPDATED "200902240000Z" ORGANIZATION "ADVA Optical Networking" CONTACT-INFO " Raghav Trivedi ADVA Optical Networking, Inc. Tel: +1 972 759-1239 E-mail: rtrivedi@advaoptical.com Postal: 2301 N. Greenville Ave. #300 Richardson, TX USA 75082" DESCRIPTION "This module defines the Redundancy MIB definitions used by the FSP150CM product line. Copyright (C) ADVA Optical Networking." REVISION "200902240000Z" DESCRIPTION "Notes from release 200902240000Z, (1)MIB version ready for release FSP150CM 5.1." ::= {fsp150cm 15} -- -- OID definitions -- cmRedundancyObjects OBJECT IDENTIFIER ::= {cmRedundancyMIB 1} cmRedundancyNotifications OBJECT IDENTIFIER ::= {cmRedundancyMIB 2} cmRedundancyConformance OBJECT IDENTIFIER ::= {cmRedundancyMIB 3} -- -- Textual Conventions -- CmRedundancyArch ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for Redundancy Architecture. loadbalance, activestandby" SYNTAX INTEGER { loadbalance (1), activestandby (2) } CmRedundancyStandbyMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for Redundancy Mode. coldStandby(1) A method of redundancy in which the secondary (i.e., backup) system is only called upon when the primary system fails. The system on cold standby receives scheduled data backups, but less frequently than a warm standby. warmStandby(2) A method of redundancy in which the secondary (i.e., backup) system runs in the background of the primary system. Data is mirrored to the secondary server at regular intervals, which means that there are times when both servers do not contain the exact same data.. hotStandby(3) A method of redundancy in which the primary and secondary (i.e., backup) systems run simultaneously. The data is mirrored to the secondary server in real time so that both systems contain identical information. " SYNTAX INTEGER { cold (1), warm (2), hot (3) } CmRedundancyState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for Redundancy State." SYNTAX INTEGER { disabled (1), enabled (2) } CmRedundancySyncStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for synchronization status." SYNTAX INTEGER { none (1), out-of-synchronize (2), bulk-synchronize (3), incremental-synchronize (4) } CmRedundancySwitchOverReason ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for Redundancy Last Switch Over Reason." SYNTAX INTEGER { unknown (1), latestUpdatedData (2), userTrigger (3), cardReset (4), cardRemoval (5), softwareFailure (6), hardwareFailure (7) } CmRedundancySyncMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for Redundancy Synchronization Mode. automatically - Active card automatically propagates config data to its peer manually - User needs to manually copy config data to standby card and apply it. " SYNTAX INTEGER { automatically (1), manually(2) } CmRedundancyAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for User initiated Redundancy Switch Action. force - Force Switch from Active Card manual - Manual Switch from Active Card releasefore - Release Force switch from Active Card " SYNTAX INTEGER { notApplicable (0), force (1), manual (2), releaseforce (3) } CmRedundancyUnitState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumerations for Redundancy Unit State. none - no state normal - normal state maintenance - maintenance state faultisolation - faultisolation " SYNTAX INTEGER { none (1), normal (2), maintenance(3), faultisolation(4), lock(5), extracted(6), init(7), stanbdby(8) } -- -- Entity Redundancy Group Table -- cmRedundancyGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF CmRedundancyGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to the Redundancy Groups. " ::= { cmRedundancyObjects 1 } cmRedundancyGroupEntry OBJECT-TYPE SYNTAX CmRedundancyGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information applicable to a particular Redundancy Group." INDEX { neIndex, cmRedundancyGroupIndex } ::= { cmRedundancyGroupTable 1 } CmRedundancyGroupEntry ::= SEQUENCE { cmRedundancyGroupIndex Integer32, cmRedundancyGroupUserLabel DisplayString, cmRedundancyGroupType CardType, cmRedundancyGroupSyncEnabled TruthValue, cmRedundancyGroupActiveCard VariablePointer, cmRedundancyGroupActiveCardState CmRedundancyUnitState, cmRedundancyGroupStandbyCard VariablePointer, cmRedundancyGroupStandbyCardState CmRedundancyUnitState, cmRedundancyGroupLastSwitchOverTime TimeTicks, cmRedundancyGroupLastSwitchOverReason CmRedundancySwitchOverReason, cmRedundancyGroupState CmRedundancyState, cmRedundancyGroupSyncStatus CmRedundancySyncStatus, cmRedundancyGroupAction CmRedundancyAction } cmRedundancyGroupIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unique index value associated with the Redundancy Group." ::= { cmRedundancyGroupEntry 1 } cmRedundancyGroupUserLabel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "User Label associated with the Reduandancy Group." ::= { cmRedundancyGroupEntry 2 } cmRedundancyGroupType OBJECT-TYPE SYNTAX CardType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of card who belongs to the Redundancy Group." ::= { cmRedundancyGroupEntry 3 } cmRedundancyGroupSyncEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The way of the synchronization in Redundancy Group." ::= { cmRedundancyGroupEntry 4 } cmRedundancyGroupActiveCard OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "The corresponding OID of the Active/Primary Card in the Redundancy Group." ::= { cmRedundancyGroupEntry 5 } cmRedundancyGroupActiveCardState OBJECT-TYPE SYNTAX CmRedundancyUnitState MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the Active Card in the Redundancy Group." ::= { cmRedundancyGroupEntry 6 } cmRedundancyGroupStandbyCard OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "The corresponding OID of the Standby/Secondary Card in the Redundancy Group." ::= { cmRedundancyGroupEntry 7 } cmRedundancyGroupStandbyCardState OBJECT-TYPE SYNTAX CmRedundancyUnitState MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the Standby Card in the Redundancy Group." ::= { cmRedundancyGroupEntry 8 } cmRedundancyGroupLastSwitchOverTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when last switch over occurred." ::= { cmRedundancyGroupEntry 9 } cmRedundancyGroupLastSwitchOverReason OBJECT-TYPE SYNTAX CmRedundancySwitchOverReason MAX-ACCESS read-only STATUS current DESCRIPTION "The reason for last switch over in the Redundancy Group." ::= { cmRedundancyGroupEntry 10 } cmRedundancyGroupState OBJECT-TYPE SYNTAX CmRedundancyState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the Redundancy Group." ::= { cmRedundancyGroupEntry 11 } cmRedundancyGroupSyncStatus OBJECT-TYPE SYNTAX CmRedundancySyncStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current sync state of the Redundancy Group." ::= { cmRedundancyGroupEntry 12 } cmRedundancyGroupAction OBJECT-TYPE SYNTAX CmRedundancyAction MAX-ACCESS read-write STATUS current DESCRIPTION "User initiated switch action of the Redundancy Group." ::= { cmRedundancyGroupEntry 13 } -- -- Notification -- -- -- Conformance -- cmRedundancyCompliances OBJECT IDENTIFIER ::= {cmRedundancyConformance 1} cmRedundancyGroups OBJECT IDENTIFIER ::= {cmRedundancyConformance 2} cmRedundancyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Describes the requirements for conformance to the CM Redundancy group." MODULE -- this module MANDATORY-GROUPS { cmRedundancyObjectGroup } ::= { cmRedundancyCompliances 1 } cmRedundancyObjectGroup OBJECT-GROUP OBJECTS { cmRedundancyGroupIndex, cmRedundancyGroupUserLabel, cmRedundancyGroupType, cmRedundancyGroupSyncEnabled, cmRedundancyGroupActiveCard, cmRedundancyGroupActiveCardState, cmRedundancyGroupStandbyCard, cmRedundancyGroupStandbyCardState, cmRedundancyGroupLastSwitchOverTime, cmRedundancyGroupLastSwitchOverReason, cmRedundancyGroupState, cmRedundancyGroupSyncStatus, cmRedundancyGroupAction } STATUS current DESCRIPTION "A collection of objects used to manage the CM Redundancy Object group." ::= { cmRedundancyGroups 1 } END