CM-SA-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, IpAddress, Unsigned32, Counter64 FROM SNMPv2-SMI DateAndTime, DisplayString, TruthValue, RowStatus, StorageType, MacAddress, VariablePointer, TEXTUAL-CONVENTION FROM SNMPv2-TC Ipv6Address FROM IPV6-TC fsp150cm FROM ADVA-MIB TrafficDirection, VlanId, VlanPriority, IpVersion, IpPriorityMapMode, ScheduleType, ClassOfServiceType, CmPmBinAction FROM CM-COMMON-MIB neIndex, shelfIndex, slotIndex FROM CM-ENTITY-MIB BitErrRate, PolicerColorMode FROM CM-FACILITY-MIB AdminState, OperationalState, SecondaryState, PerfCounter64, PerfCounter32, ScheduleType, SchedActivityStatus, MepDestinationType, ClassOfServiceType FROM CM-COMMON-MIB Dot1agCfmMepIdOrZero FROM IEEE8021-CFM-MIB; cmServiceAssuranceMIB MODULE-IDENTITY LAST-UPDATED "201912010000Z" ORGANIZATION "ADVA Optical Networking SE" CONTACT-INFO "Web URL: http://adva.com/ E-mail: support@adva.com Postal: ADVA Optical Networking SE Campus Martinsried Fraunhoferstrasse 9a 82152 Martinsried/Munich Germany Phone: +49 089 89 06 65 0 Fax: +49 089 89 06 65 199 " DESCRIPTION "This module defines the Service Assurance MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA." REVISION "201912010000Z" DESCRIPTION " Notes from release 201912010000Z (1) Added ecpaControlMonitorPortType Notes from release 201607310000Z (1)Added the following objects for EsaProbeCOSConfigEntry: - esaProbeCOSConfigSoamPmExtAvailFlrThreshold - esaProbeCOSConfigSoamPmExtFlrDeltaTNumLmPdus - esaProbeCOSConfigSoamPmExtConDeltaTsForAvail Notes from release 201509200000Z (1)Added new objects to ecpaControlTable: - ecpaControlEcpaType (2)Added new objects to ecpaConfigStreamTable: - ecpaConfigStreamUdpControl - ecpaConfigStreamUdpSrcPort - ecpaConfigStreamUdpDstPort (3)Added new objects to ecpaTestStreamTable: - ecpaTestStreamUdpControl - ecpaTestStreamUdpSrcPort - ecpaTestStreamUdpDstPort (3)Added new enumeration: - EcpaType Notes from release 201302130000Z (i)Added the following objects: - esaProbeAlias - esaReflectorAlias Notes from release 201111220000Z (i)Added the following objects to support ESA Probes and Reflectors on pluggable cards: -esaProbeAdminState, esaProbeOperationalState, esaProbeSecondaryState -esaReflectorAdminState, esaReflectorOperationalState, esaReflectorSecondaryState Notes from release 201105260000Z (i)Formalized the compliance groups in the MIBs Notes from release 201006220000Z (i)Updated range of ecpaControlNumFrames to (0..2147483647), (ii)Removed redundant column ecpaTestStreamRxBitRate Notes from release 201006100000Z (i)Updated range of esaProbeHistoryBins and esaProbeDistHistoryBins to include 0 - since it is possible that some ESA Probes will not have history bins (ii)Changed ecpaControlStatus occurrences to ecpaControlTestStatus (iii)Changed EcpaTestType TC literal continous to continuous Notes from release 201003250000Z, (1)Added new objects for ecpaTestStreamRxBitRate, ecpaConfigStreamUsePortSourceMAC (1)ecpaControlDuration now has a max range of 72 hours (259200 seconds) instead of 1 hour (3600 seconds) Notes from release 201002110000Z This release is applicable to the FSP150CC Release 4.3 device GE201, GE201-SE and FSP150CM Release 4.1. (1)Added new objects to ecpaConfigStreamTable ecpaConfigStreamInnerVlan2Enabled, ecpaConfigStreamInnerVlan2Id, ecpaConfigStreamInnerVlan2Prio, ecpaConfigStreamInnerVlan2EtherType, ecpaConfigStreamDestIpV4Address, ecpaConfigStreamDestIpV6Address (2)Added new objects to ecpaTestStreamTable ecpaTestStreamInnerVlan2Enabled, ecpaTestStreamInnerVlan2Id, ecpaTestStreamInnerVlan2Prio, ecpaTestStreamInnerVlan2EtherType, ecpaTestStreamDestIpV4Address, ecpaTestStreamDestIpV6Address, ecpaTestStreamChanged (3)Added new objects to esaProbeTable esaProbeMultiCOSEnabled, esaProbeSLAMonitorType, esaProbeCOSType, esaProbeSLMMulticastMACEnabled, esaProbeSOAMInterval, esaProbeSOAMPktSize (4)Added new tables : esaProbeCOSConfigTable, esaProbeMultiDestinationTable Notes from release 200904150000Z This release is applicable to the FSP150CC Release 4.1 devices GE101 and GE206. Following new tables are added, esaProbeTable, esaProbeScheduleGroupTable, esaReflectorTable, esaProbeStatsTable, esaProbeHistoryTable, esaProbeDistStatsConfigTable, esaProbeDistStatsTable, esaProbeDistStatsBinTable, esaProbeDistHistoryTable, esaProbeDistHistoryBinTable, esaProbeStatsThresholdTable Following notification is added, esaProbeThresholdCrossingAlert Notes from release 200803030000Z, (1)MIB version ready for release FSP150CM 3.1. Notes from release 201603150000Z This release is applicable to the FSP150CC Release 7.1.1 device GE206V, XG210 (1) Following new extension tables are added, f3EsaProbeStatsSoamPmExtTable, f3EsaProbeHistorySoamPmExtTable, f3EsaProbeCOSConfigSoamPmExtTable." ::= {fsp150cm 8} -- -- OID definitions -- cmServAssuranceObjects OBJECT IDENTIFIER ::= {cmServiceAssuranceMIB 1} cmServAssuranceNotifications OBJECT IDENTIFIER ::= {cmServiceAssuranceMIB 2} cmServAssuranceConformance OBJECT IDENTIFIER ::= {cmServiceAssuranceMIB 3} -- -- Textual Conventions -- EcpaTestStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "ECPA Test Status." SYNTAX INTEGER { initial (1), in-progress (2), stopped (3), completed (4), aborted (5) } EcpaPayloadType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "ECPA Payload Type." SYNTAX INTEGER { fixed (1), random (2) } EcpaTestType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "ECPA Control Test Type." SYNTAX INTEGER { duration(1), numframes(2), continuous(3) } EcpaType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "ECPA Type." SYNTAX INTEGER { regular(1), enhanced(2) } EcpaMonitorPortType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "ECPA Monitor Port Type." SYNTAX INTEGER { any(1), source(2) } EcpaControlAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "ECPA Control Action." SYNTAX INTEGER { not-applicable(0), start(1), stop(2) } EsaProbeProtocol ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "ESA Probe Protocol Types." SYNTAX INTEGER { icmpEcho(1), udpEcho(2), icmpTimestamp(3), y1731(4), -- this is the Y.1731 LM/DM protocol y1731-slm-slr(5), -- this is the Y.1731 SLM/SLR protocol y1731-slm-dmm(6) } EsaProbeDirection ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "ESA Probe Direction." SYNTAX INTEGER { up(1), -- towards the bridge down(2) -- away from the bridge } EsaReflectorDirection ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "ESA Reflector Direction." SYNTAX INTEGER { up(1), -- towards the bridge down(2) -- away from the bridge } EsaProbePmIntervalType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "ESA Probe PM Interval Types." SYNTAX INTEGER { current(1), -- current pm rollover(2) -- rollover } EsaProbeHistoryIntervalType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "ESA Probe Y1731 History Interval Types." SYNTAX INTEGER { interval-1min(1), -- 1 min interval-5min(2), -- 5 mins interval-10min(3), -- 10 mins interval-15min(4), -- 15 mins interval-60min(5) -- 60 mins } EsaProbeDistStatsType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the ESA Probe Statistics Distribution Type." SYNTAX INTEGER { roundtrip-delay(1), oneway-p2r-delay(2), oneway-r2p-delay(3), oneway-p2r-jitter(4), oneway-r2p-jitter(5), oneway-p2r-absjitter(6), oneway-r2p-absjitter(7), roundtrip-absjitter(8), oneway-p2r-fdr(9), oneway-r2p-fdr(10), roundtrip-fdr(11) } EsaAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "ESA Scheduled Group/Reflector Action." SYNTAX INTEGER { not-applicable(0), suspend(1), resume(2), addEsaProbe(3), removeEsaProbe(4) } EsaProbePktIntervalType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Interval Type used for LMM and DMM messages." SYNTAX INTEGER { not-applicable(0), interval-10ms(1),--applicable for DMM interval-100ms(2),--applicable for DMM interval-1sec(3), -- applicable for LMM and DMM interval-10sec(4), -- applicable for LMM and DMM interval-1min(5) -- applicable for LMM and DMM } EsaProbeSLAMonitorType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "ESA Probe SLA Monitor Type." SYNTAX INTEGER { not-applicable(0), point-to-point(1),-- point2point point-to-multipoint(2)--point2multipoint } BerTestStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "BER Test Status." SYNTAX INTEGER { not-applicable(0), running (1), not-running (2) } BerTestMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "BER Test Control Test Mode." SYNTAX INTEGER { not-applicable(0), generator(1), monitor(2), singleend(3) } BertControlAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "BER Test Control Action." SYNTAX INTEGER { not-applicable(0), start(1), stop(2) } BertPattern ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "BERT Tx Pattern." SYNTAX INTEGER { not-applicable(0), all-0(1), all-1(2), alt-1100(3), bit-1in8(4), bit-3in24(5), bit-2exp20-qrss(6), bit-2exp11-prbs(7), bit-2exp15-prbs(8), bit-2exp23-prbs(9), userdefined(10) } BertUserPatternLength ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "BERT Error Rate." SYNTAX INTEGER { not-applicable(0), length-1byte(1), length-2byte(2), length-3byte(3), length-4byte(4) } BertSyncState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "BERT Sync State." SYNTAX INTEGER { not-applicable(0), sync(1), outofsync(2) } -- -- Etherjack Connection Performance Analyzer Control Table -- ecpaControlTable OBJECT-TYPE SYNTAX SEQUENCE OF EcpaControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the control of Etherjack Connection Performance Analyzer Streams. Upto 12 ECPA streams can be configured per test head; 3 ECPA streams can be simultaneously executed." ::= { cmServAssuranceObjects 1 } ecpaControlEntry OBJECT-TYPE SYNTAX EcpaControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the ecpaControlTable." INDEX { neIndex, shelfIndex, slotIndex, ecpaControlIndex } ::= { ecpaControlTable 1 } EcpaControlEntry ::= SEQUENCE { ecpaControlIndex Integer32, ecpaControlSourcePort VariablePointer, ecpaControlTestType EcpaTestType, ecpaControlNumFrames Integer32, ecpaControlDuration Integer32, ecpaControlInjectorDirection TrafficDirection, ecpaControlMonitorDirection TrafficDirection, ecpaControlStream1 Integer32, ecpaControlStream2 Integer32, ecpaControlStream3 Integer32, ecpaControlAction EcpaControlAction, ecpaControlTestStatus EcpaTestStatus, ecpaControlStorageType StorageType, ecpaControlRowStatus RowStatus, ecpaControlEcpaType EcpaType, ecpaControlMonitorPortType EcpaMonitorPortType } ecpaControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this Etherjack Connection Performance Analyzer Control Test head. There is only one test head per card." ::= { ecpaControlEntry 1 } ecpaControlSourcePort OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "Pointer to the Access or Network Port on which the ECPA test will be started within a card." ::= { ecpaControlEntry 2 } ecpaControlTestType OBJECT-TYPE SYNTAX EcpaTestType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of ECPA test to be performed. When 'duration' test is specified, ECPA test is run for 'ecpaControlDuration' time. When 'numFrames' test is specified, ECPA test is run for 'ecpaControlNumFrames', when 'continous' test is specified, ECPA test is run until an explicit 'ecpaControlAction' of 'stop' of received." ::= { ecpaControlEntry 3 } ecpaControlNumFrames OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of the number of frames for traffic generation. Traffic Generation will be completed after the specified number of frames are transmitted." ::= { ecpaControlEntry 4 } ecpaControlDuration OBJECT-TYPE SYNTAX Integer32 (0..259200) MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of the time in seconds for traffic generation. Traffic Generation will be stopped after the specified time interval is exhausted." ::= { ecpaControlEntry 5 } ecpaControlInjectorDirection OBJECT-TYPE SYNTAX TrafficDirection MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of the direction of traffic generation. This value must be specified if the interface is used for traffic generation. Both of ecpaControlInjectorDirection and ecpaControlMonitorDirection must be specified." ::= { ecpaControlEntry 6 } ecpaControlMonitorDirection OBJECT-TYPE SYNTAX TrafficDirection MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of the direction of receival of generated traffic. This value must be specified if the interface is used for receiving/monitoring generated traffic. Both of ecpaControlInjectorDirection and ecpaControlMonitorDirection must be specified." ::= { ecpaControlEntry 7 } ecpaControlStream1 OBJECT-TYPE SYNTAX Integer32 (0..48) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies which stream should be included in the ECPA execution. Value of 0 indicates that no streams is selected by ecpaControlStream1. Non 0 value indicates the selected ECPA stream." ::= { ecpaControlEntry 8 } ecpaControlStream2 OBJECT-TYPE SYNTAX Integer32 (0..48) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies which stream should be included in the ECPA execution. Value of 0 indicates that no streams is selected by ecpaControlStream2. Non 0 value indicates the selected ECPA stream." ::= { ecpaControlEntry 9 } ecpaControlStream3 OBJECT-TYPE SYNTAX Integer32 (0..48) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies which stream should be included in the ECPA execution. Value of 0 indicates that no streams is selected by ecpaControlStream3. Non 0 value indicates the selected ECPA stream." ::= { ecpaControlEntry 10 } ecpaControlAction OBJECT-TYPE SYNTAX EcpaControlAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables starting/stopping of traffic generation as well as resetting of monitored streams. This object may not be specified at configuration creation time - in this case it will take the value of `none'. This allows manager to explicitly control the start and stop of traffic generation/monitoring activity. Value of `stop' is invalid if the activity is specified but not started. Value of `start' is valid during creation time, as well as when activity is already stopped. Specification of `reset' resets the specified streams to default values, as well as clears the control specification. Get on this variable gives the most recent SNMP set specification." ::= { ecpaControlEntry 11 } ecpaControlTestStatus OBJECT-TYPE SYNTAX EcpaTestStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the current status of test set configuration entry. Upon creation, the status has a value of `initial'; the status changes to `in-progress' upon ecpaControlAction indicating `start'; the status changes to `completed' upon ecpaControlAction indicating stop, as well as when the specified test generation completes autonomously upon completion of number of frames or completion of specified time interval." ::= { ecpaControlEntry 12 } ecpaControlStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { ecpaControlEntry 13 } ecpaControlRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ecpaControlRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ecpaControlRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ecpaControlRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { ecpaControlEntry 14 } ecpaControlEcpaType OBJECT-TYPE SYNTAX EcpaType MAX-ACCESS read-write STATUS current DESCRIPTION "ECPA test can run in a regular mode(1) or enhaced mode (2)." ::= { ecpaControlEntry 15 } ecpaControlMonitorPortType OBJECT-TYPE SYNTAX EcpaMonitorPortType MAX-ACCESS read-create STATUS current DESCRIPTION "ECPA monitor port type." ::= { ecpaControlEntry 16 } -- -- Etherjack Connection Performance Analyzer Stream Table -- ecpaConfigStreamTable OBJECT-TYPE SYNTAX SEQUENCE OF EcpaConfigStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the configuration of Etherjack Connection Performance Analyzer Stream Specifications." ::= { cmServAssuranceObjects 2 } ecpaConfigStreamEntry OBJECT-TYPE SYNTAX EcpaConfigStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the ecpaConfigStreamTable." INDEX { ecpaConfigStreamIndex } ::= { ecpaConfigStreamTable 1 } EcpaConfigStreamEntry ::= SEQUENCE { ecpaConfigStreamIndex Integer32, ecpaConfigStreamName DisplayString, ecpaConfigStreamFrameSize Integer32, ecpaConfigStreamRate Unsigned32, ecpaConfigStreamPayloadType EcpaPayloadType, ecpaConfigStreamSignature DisplayString, ecpaConfigStreamDestinationMAC MacAddress, ecpaConfigStreamSourceMAC MacAddress, ecpaConfigStreamOuterVlanEnabled TruthValue, ecpaConfigStreamOuterVlanId VlanId, ecpaConfigStreamOuterVlanPrio VlanPriority, ecpaConfigStreamOuterVlanEtherType Integer32, ecpaConfigStreamInnerVlanEnabled TruthValue, ecpaConfigStreamInnerVlanId VlanId, ecpaConfigStreamInnerVlanPrio VlanPriority, ecpaConfigStreamInnerVlanEtherType Integer32, ecpaConfigStreamIpVersion IpVersion, ecpaConfigStreamIpV4Address IpAddress, ecpaConfigStreamIpV6Address Ipv6Address, ecpaConfigStreamPrioMapMode IpPriorityMapMode, ecpaConfigStreamPrioVal Integer32, ecpaConfigStreamInnerVlan2Enabled TruthValue, ecpaConfigStreamInnerVlan2Id VlanId, ecpaConfigStreamInnerVlan2Prio VlanPriority, ecpaConfigStreamInnerVlan2EtherType Integer32, ecpaConfigStreamDestIpV4Address IpAddress, ecpaConfigStreamDestIpV6Address Ipv6Address, ecpaConfigStreamUsePortSourceMAC TruthValue, ecpaConfigStreamRateHi Unsigned32, ecpaConfigStreamUdpControl TruthValue, ecpaConfigStreamUdpSrcPort Integer32, ecpaConfigStreamUdpDstPort Integer32 } ecpaConfigStreamIndex OBJECT-TYPE SYNTAX Integer32 (1..48) MAX-ACCESS read-write STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this Etherjack Connection Performance Analyzer." ::= { ecpaConfigStreamEntry 1 } ecpaConfigStreamName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Symbolic Stream Name that can be associated with an ECPA stream." ::= { ecpaConfigStreamEntry 2 } ecpaConfigStreamFrameSize OBJECT-TYPE SYNTAX Integer32 (64..9612) MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of fixed length frame size in bytes for traffic generation. If not specified, default value of 64 bytes is used. CM Aggregation Product limits the upper range value to 9600." ::= { ecpaConfigStreamEntry 3 } ecpaConfigStreamRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The object enables specification of the traffic generation rate." ::= { ecpaConfigStreamEntry 4 } ecpaConfigStreamPayloadType OBJECT-TYPE SYNTAX EcpaPayloadType MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of type of payload to generate `fixed' type indicates a generation pattern of 5A, A5, 5A, A5 bytes. `random' type indicates traffic generation with pseudo-random pattern." ::= { ecpaConfigStreamEntry 5 } ecpaConfigStreamSignature OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates an 8-byte signature specified by the user in hexadecimal or ASCII format. This signature is currently used by the FSP150Mx products for test frame recognition and will be appended directly after the ECPA Signature in the test frame and be 4-byte aligned. This will allow the F3 ECPA feature to interoperate with the existing FSP150Mx products. Hexadecimal signature must be prefixed with 0x/0X." ::= { ecpaConfigStreamEntry 6 } ecpaConfigStreamDestinationMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Allows specification of destination MAC in the generated traffic." ::= { ecpaConfigStreamEntry 7 } ecpaConfigStreamSourceMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Allows specification of source MAC in the generated traffic." ::= { ecpaConfigStreamEntry 8 } ecpaConfigStreamOuterVlanEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allows specification of a VLAN tagged ECPA stream. This variable enables the outer VLAN specification, in the case of a doubly tagged ECPA stream. If a singly tagged ECPA stream is desired, this specification is mandatory." ::= { ecpaConfigStreamEntry 9 } ecpaConfigStreamOuterVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "Outer VLAN Id associated with the ECPA stream. Valid only if ecpaConfigStreamOuterVlanEnabled is enabled." ::= { ecpaConfigStreamEntry 10 } ecpaConfigStreamOuterVlanPrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "Outer VLAN Priority associated with the ECPA stream. Valid only if ecpaConfigStreamOuterVlanEnabled is enabled." ::= { ecpaConfigStreamEntry 11 } ecpaConfigStreamOuterVlanEtherType OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "EtherType associated with the Outer VLAN Tag. Valid only if ecpaConfigStreamOuterVlanEnabled is enabled." ::= { ecpaConfigStreamEntry 12 } ecpaConfigStreamInnerVlanEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allows specification of a VLAN tagged ECPA stream. This variable enables the outer VLAN specification, in the case of a doubly tagged ECPA stream. If a singly tagged ECPA stream is desired, this specification is mandatory." ::= { ecpaConfigStreamEntry 13 } ecpaConfigStreamInnerVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "Inner VLAN Id associated with the ECPA stream. Valid only if ecpaConfigStreamInnerVlanEnabled is enabled." ::= { ecpaConfigStreamEntry 14 } ecpaConfigStreamInnerVlanPrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "Inner VLAN Priority associated with the ECPA stream. Valid only if ecpaConfigStreamInnerVlanEnabled is enabled." ::= { ecpaConfigStreamEntry 15 } ecpaConfigStreamInnerVlanEtherType OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "EtherType associated with the Inner VLAN Tag. Valid only if ecpaConfigStreamInnerVlanEnabled is enabled." ::= { ecpaConfigStreamEntry 16 } ecpaConfigStreamIpVersion OBJECT-TYPE SYNTAX IpVersion MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of IP data in the generated test traffic. Value of `ipv4' allows test data to be IP v4 compatible. Value of `ipv6' allows test data to be IP v6 compatible." ::= { ecpaConfigStreamEntry 17 } ecpaConfigStreamIpV4Address OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of ipv4 IP Address for the test stream.This is used when ecpaConfigStreamIpVersion is ipv4." ::= { ecpaConfigStreamEntry 18 } ecpaConfigStreamIpV6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of ipv6 IP Address for the test stream.This is used when ecpaConfigStreamIpVersion is ipv6." ::= { ecpaConfigStreamEntry 19 } ecpaConfigStreamPrioMapMode OBJECT-TYPE SYNTAX IpPriorityMapMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of Priority Mapping Mode for the test stream." ::= { ecpaConfigStreamEntry 20 } ecpaConfigStreamPrioVal OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of Priority Value for ecpaConfigStreamPrioMapMode as TOS/DSCP." ::= { ecpaConfigStreamEntry 21 } ecpaConfigStreamInnerVlan2Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allows specification of a VLAN tagged ECPA stream. This variable enables the second(inner) VLAN specification, in the case of a 3-tagged ECPA stream. If a three tagged ECPA stream is desired, this specification is mandatory." ::= { ecpaConfigStreamEntry 22 } ecpaConfigStreamInnerVlan2Id OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "Inner (second) VLAN Id associated with the ECPA stream. Valid only if ecpaConfigStreamInnerVlan2Enabled is enabled." ::= { ecpaConfigStreamEntry 23 } ecpaConfigStreamInnerVlan2Prio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "Inner (second) VLAN Priority associated with the ECPA stream. Valid only if ecpaConfigStreamInnerVlan2Enabled is enabled." ::= { ecpaConfigStreamEntry 24 } ecpaConfigStreamInnerVlan2EtherType OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "EtherType associated with the Inner (second) VLAN Tag. Valid only if ecpaConfigStreamInnerVlan2Enabled is enabled." ::= { ecpaConfigStreamEntry 25 } ecpaConfigStreamDestIpV4Address OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of destination ipv4 IP Address for the test stream.This is used when ecpaConfigStreamIpVersion is ipv4." ::= { ecpaConfigStreamEntry 26 } ecpaConfigStreamDestIpV6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of destination ipv6 IP Address for the test stream.This is used when ecpaConfigStreamIpVersion is ipv6." ::= { ecpaConfigStreamEntry 27 } ecpaConfigStreamUsePortSourceMAC OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object when not enabled indicates that MAC Address specified by ecpaConfigStreamSourceMAC as the source MAC Address of the ECPA test stream. For EGX, if enabled indicates that the corresponding ECPA test stream will use the associated Source Port's MAC Address. For GE110 products and CC products, if enabled indicates that the corresponding ECPA test stream will use the associated Source Port's Diagnostic MAC Address." ::= { ecpaConfigStreamEntry 28 } ecpaConfigStreamRateHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The object enables specification of the higher 32 bits of the traffic generation rate." ::= { ecpaConfigStreamEntry 29 } ecpaConfigStreamUdpControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables or disables UDP header." ::= { ecpaConfigStreamEntry 30 } ecpaConfigStreamUdpSrcPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "When UDP control is enabled, this object provides the UDP source port. Otherwize it is ignored." ::= { ecpaConfigStreamEntry 31 } ecpaConfigStreamUdpDstPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "When UDP control is enabled, this object provides the UDP destination port. Otherwize it is ignored." ::= { ecpaConfigStreamEntry 32 } --- ECPA Test Streams Table ecpaTestStreamTable OBJECT-TYPE SYNTAX SEQUENCE OF EcpaTestStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries containing results of a previous test." ::= { cmServAssuranceObjects 3 } ecpaTestStreamEntry OBJECT-TYPE SYNTAX EcpaTestStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the ecpaTestStreamTable. Entries in this table show results of the current ECPA test." INDEX { neIndex, shelfIndex, slotIndex, ecpaControlIndex, ecpaTestStreamIndex } ::= { ecpaTestStreamTable 1 } EcpaTestStreamEntry ::= SEQUENCE { ecpaTestStreamIndex Integer32, ecpaTestStreamSourcePort VariablePointer, ecpaTestStreamName DisplayString, ecpaTestStreamFrameSize Integer32, ecpaTestStreamRate Unsigned32, ecpaTestStreamPayloadType EcpaPayloadType, ecpaTestStreamSignature DisplayString, ecpaTestStreamDestinationMAC MacAddress, ecpaTestStreamSourceMAC MacAddress, ecpaTestStreamOuterVlanEnabled TruthValue, ecpaTestStreamOuterVlanId VlanId, ecpaTestStreamOuterVlanPrio VlanPriority, ecpaTestStreamOuterVlanEtherType Integer32, ecpaTestStreamInnerVlanEnabled TruthValue, ecpaTestStreamInnerVlanId VlanId, ecpaTestStreamInnerVlanPrio VlanPriority, ecpaTestStreamInnerVlanEtherType Integer32, ecpaTestStreamIpVersion IpVersion, ecpaTestStreamIpV4Address IpAddress, ecpaTestStreamIpV6Address Ipv6Address, ecpaTestStreamPrioMapMode IpPriorityMapMode, ecpaTestStreamPrioVal Integer32, ecpaTestStreamMonStartTime DateAndTime, ecpaTestStreamMonEndTime DateAndTime, ecpaTestStreamMonElapsedTime Integer32, ecpaTestStreamMonTxFrames PerfCounter64, ecpaTestStreamMonRxFrames PerfCounter64, ecpaTestStreamMonRxPercentSuccess Integer32, ecpaTestStreamMonRxOutOfSeqErrs PerfCounter64, ecpaTestStreamMonRxSeqGaps PerfCounter64, ecpaTestStreamMonRxNonEcpaFrames PerfCounter64, ecpaTestStreamMonRxMinDelay Unsigned32, ecpaTestStreamMonRxMaxDelay Unsigned32, ecpaTestStreamMonRxAvgDelay Unsigned32, ecpaTestStreamMonRx1stFrameSize Integer32, ecpaTestStreamMonRx1stFrame1Octets DisplayString, ecpaTestStreamMonRx1stFrame2Octets DisplayString, ecpaTestStreamMonRx1stFrame3Octets DisplayString, ecpaTestStreamMonRx1stFrame4Octets DisplayString, ecpaTestStreamMonRx1stFrame5Octets DisplayString, ecpaTestStreamMonRx1stFrame6Octets DisplayString, ecpaTestStreamMonRx1stFrame7Octets DisplayString, ecpaTestStreamMonRx1stFrame8Octets DisplayString, ecpaTestStreamMonRx1stFrame9Octets DisplayString, ecpaTestStreamMonRx1stFrame10Octets DisplayString, ecpaTestStreamMonRxBitRate PerfCounter64, --added for EG-X product ecpaTestStreamInnerVlan2Enabled TruthValue, ecpaTestStreamInnerVlan2Id VlanId, ecpaTestStreamInnerVlan2Prio VlanPriority, ecpaTestStreamInnerVlan2EtherType Integer32, ecpaTestStreamDestIpV4Address IpAddress, ecpaTestStreamDestIpV6Address Ipv6Address, ecpaTestStreamConfigChanged TruthValue, ecpaTestStreamRateHi Unsigned32, ecpaTestStreamUdpControl TruthValue, ecpaTestStreamUdpSrcPort Integer32, ecpaTestStreamUdpDstPort Integer32 } ecpaTestStreamIndex OBJECT-TYPE SYNTAX Integer32 (1..3) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value corresponding to the stream index for which the ECPA test was initiated." ::= { ecpaTestStreamEntry 1 } ecpaTestStreamSourcePort OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value corresponding to the ifIndex for which the ECPA test was initiated." ::= { ecpaTestStreamEntry 2 } ecpaTestStreamName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Symbolic Stream Name that can be associated with an ECPA stream." ::= { ecpaTestStreamEntry 3 } ecpaTestStreamFrameSize OBJECT-TYPE SYNTAX Integer32 (64..9612) MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of fixed length frame size in bytes for traffic generation. If not specified, default value of 64 bytes is used." ::= { ecpaTestStreamEntry 4 } ecpaTestStreamRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The object enables specification of the traffic generation rate." ::= { ecpaTestStreamEntry 5 } ecpaTestStreamPayloadType OBJECT-TYPE SYNTAX EcpaPayloadType MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of type of payload to generate `fixed' type indicates a generation pattern of 5A, A5, 5A, A5 bytes. `random' type indicates traffic generation with pseudo-random pattern." ::= { ecpaTestStreamEntry 6 } ecpaTestStreamSignature OBJECT-TYPE SYNTAX DisplayString (SIZE (10)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates an 8-byte signature specified by the user in hexadecimal or ASCII format. This signature is currently used by the FSP150Mx products for test frame recognition and will be appended directly after the ECPA Signature in the test frame and be 4-byte aligned. This will allow the F3 ECPA feature to interoperate with the existing FSP150Mx products. Hexadecimal signature must be prefixed with 0x/0X." ::= { ecpaTestStreamEntry 7 } ecpaTestStreamDestinationMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Allows specification of destination MAC in the generated traffic." ::= { ecpaTestStreamEntry 8 } ecpaTestStreamSourceMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Allows specification of source MAC in the generated traffic." ::= { ecpaTestStreamEntry 9 } ecpaTestStreamOuterVlanEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allows specification of a VLAN tagged ECPA stream. This variable enables the outer VLAN specification, in the case of a doubly tagged ECPA stream. If a singly tagged ECPA stream is desired, this specification is mandatory." ::= { ecpaTestStreamEntry 10 } ecpaTestStreamOuterVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "Outer VLAN Id associated with the ECPA stream. Valid only if ecpaTestStreamOuterVlanEnabled is enabled." ::= { ecpaTestStreamEntry 11 } ecpaTestStreamOuterVlanPrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "Outer VLAN Priority associated with the ECPA stream. Valid only if ecpaTestStreamOuterVlanEnabled is enabled." ::= { ecpaTestStreamEntry 12 } ecpaTestStreamOuterVlanEtherType OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "EtherType associated with the Outer VLAN Tag. Valid only if ecpaTestStreamOuterVlanEnabled is enabled." ::= { ecpaTestStreamEntry 13 } ecpaTestStreamInnerVlanEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allows specification of a VLAN tagged ECPA stream. This variable enables the outer VLAN specification, in the case of a doubly tagged ECPA stream. If a singly tagged ECPA stream is desired, this specification is mandatory." ::= { ecpaTestStreamEntry 14 } ecpaTestStreamInnerVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "Inner VLAN Id associated with the ECPA stream. Valid only if ecpaTestStreamInnerVlanEnabled is enabled." ::= { ecpaTestStreamEntry 15 } ecpaTestStreamInnerVlanPrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "Inner VLAN Priority associated with the ECPA stream. Valid only if ecpaTestStreamInnerVlanEnabled is enabled." ::= { ecpaTestStreamEntry 16 } ecpaTestStreamInnerVlanEtherType OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "EtherType associated with the Inner VLAN Tag. Valid only if ecpaTestStreamInnerVlanEnabled is enabled." ::= { ecpaTestStreamEntry 17 } ecpaTestStreamIpVersion OBJECT-TYPE SYNTAX IpVersion MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of IP data in the generated test traffic. Value of `ipv4' allows test data to be IP v4 compatible. Value of `ipv6' allows test data to be IP v6 compatible." ::= { ecpaTestStreamEntry 18 } ecpaTestStreamIpV4Address OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of ipv4 IP Address for the test stream.This is used when ecpaTestStreamIpVersion is ipv4." ::= { ecpaTestStreamEntry 19 } ecpaTestStreamIpV6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of ipv6 IP Address for the test stream.This is used when ecpaTestStreamIpVersion is ipv6." ::= { ecpaTestStreamEntry 20 } ecpaTestStreamPrioMapMode OBJECT-TYPE SYNTAX IpPriorityMapMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of Priority Mapping Mode for the test stream." ::= { ecpaTestStreamEntry 21 } ecpaTestStreamPrioVal OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of Priority Value for ecpaTestStreamPrioMapMode as TOS/DSCP." ::= { ecpaTestStreamEntry 22 } ecpaTestStreamMonStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The start time of the ECPA test for this stream." ::= { ecpaTestStreamEntry 23 } ecpaTestStreamMonEndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The end time of the ECPA test for this stream." ::= { ecpaTestStreamEntry 24 } ecpaTestStreamMonElapsedTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The elapsed time of ECPA test for this stream in seconds." ::= { ecpaTestStreamEntry 25 } ecpaTestStreamMonTxFrames OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames transmitted(generated) so far. This object does not exist if the ecpaControlTestStatus indicates initial state." ::= { ecpaTestStreamEntry 26 } ecpaTestStreamMonRxFrames OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames received so far. This object does not exist if the ecpaControlTestStatus indicates initial state." ::= { ecpaTestStreamEntry 27 } ecpaTestStreamMonRxPercentSuccess OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received frames as a percentage of transmitted frames. This object does not exist if the ecpaControlTestStatus indicates initial state." ::= { ecpaTestStreamEntry 28 } ecpaTestStreamMonRxOutOfSeqErrs OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of out of sequence errors received so far. This object does not exist if the ecpaControlTestStatus indicates initial state." ::= { ecpaTestStreamEntry 29 } ecpaTestStreamMonRxSeqGaps OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of sequence gaps received so far. This object does not exist if the ecpaControlTestStatus indicates initial state." ::= { ecpaTestStreamEntry 30 } ecpaTestStreamMonRxNonEcpaFrames OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of non ECPA frames received during the execution." ::= { ecpaTestStreamEntry 31 } ecpaTestStreamMonRxMinDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum delay (in microseconds) across all frames received so far. This object does not exist if the ecpaControlTestStatus indicates initial state." ::= { ecpaTestStreamEntry 32 } ecpaTestStreamMonRxMaxDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum delay (in microseconds) across all frames received so far. This object does not exist if the ecpaControlTestStatus indicates initial state." ::= { ecpaTestStreamEntry 33 } ecpaTestStreamMonRxAvgDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average delay (in microseconds) across all frames received so far. This object does not exist if the ecpaControlTestStatus indicates initial state." ::= { ecpaTestStreamEntry 34 } ecpaTestStreamMonRx1stFrameSize OBJECT-TYPE SYNTAX Integer32 (64..9612) MAX-ACCESS read-only STATUS current DESCRIPTION "Frame size of the Monitored First Frame." ::= { ecpaTestStreamEntry 35 } ecpaTestStreamMonRx1stFrame1Octets OBJECT-TYPE SYNTAX DisplayString (SIZE (1..2048)) MAX-ACCESS read-only STATUS current DESCRIPTION "The frame contents of the first received frame - first 1024 bytes. This object does not exist if the ecpaControlTestStatus indicates initial state." ::= { ecpaTestStreamEntry 36 } ecpaTestStreamMonRx1stFrame2Octets OBJECT-TYPE SYNTAX DisplayString (SIZE (1..2048)) MAX-ACCESS read-only STATUS current DESCRIPTION "The frame contents of the first received frame - next 1024 bytes. This object does not exist if the ecpaControlTestStatus indicates initial state." ::= { ecpaTestStreamEntry 37 } ecpaTestStreamMonRx1stFrame3Octets OBJECT-TYPE SYNTAX DisplayString (SIZE (1..2048)) MAX-ACCESS read-only STATUS current DESCRIPTION "The frame contents of the first received frame - next 1024 bytes. This object does not exist if the ecpaControlTestStatus indicates initial state." ::= { ecpaTestStreamEntry 38 } ecpaTestStreamMonRx1stFrame4Octets OBJECT-TYPE SYNTAX DisplayString (SIZE (1..2048)) MAX-ACCESS read-only STATUS current DESCRIPTION "The frame contents of the first received frame - next 1024 bytes. This object does not exist if the ecpaControlTestStatus indicates initial state." ::= { ecpaTestStreamEntry 39 } ecpaTestStreamMonRx1stFrame5Octets OBJECT-TYPE SYNTAX DisplayString (SIZE (1..2048)) MAX-ACCESS read-only STATUS current DESCRIPTION "The frame contents of the first received frame - next 1024 bytes. This object does not exist if the ecpaControlTestStatus indicates initial state." ::= { ecpaTestStreamEntry 40 } ecpaTestStreamMonRx1stFrame6Octets OBJECT-TYPE SYNTAX DisplayString (SIZE (1..2048)) MAX-ACCESS read-only STATUS current DESCRIPTION "The frame contents of the first received frame - next 1024 bytes. This object does not exist if the ecpaControlTestStatus indicates initial state." ::= { ecpaTestStreamEntry 41 } ecpaTestStreamMonRx1stFrame7Octets OBJECT-TYPE SYNTAX DisplayString (SIZE (1..2048)) MAX-ACCESS read-only STATUS current DESCRIPTION "The frame contents of the first received frame - next 1024 bytes. This object does not exist if the ecpaControlTestStatus indicates initial state." ::= { ecpaTestStreamEntry 42 } ecpaTestStreamMonRx1stFrame8Octets OBJECT-TYPE SYNTAX DisplayString (SIZE (1..2048)) MAX-ACCESS read-only STATUS current DESCRIPTION "The frame contents of the first received frame - next 1024 bytes. This object does not exist if the ecpaControlTestStatus indicates initial state." ::= { ecpaTestStreamEntry 43 } ecpaTestStreamMonRx1stFrame9Octets OBJECT-TYPE SYNTAX DisplayString (SIZE (1..2048)) MAX-ACCESS read-only STATUS current DESCRIPTION "The frame contents of the first received frame - next 1024 bytes. This object does not exist if the ecpaControlTestStatus indicates initial state." ::= { ecpaTestStreamEntry 44 } ecpaTestStreamMonRx1stFrame10Octets OBJECT-TYPE SYNTAX DisplayString (SIZE (1..2048)) MAX-ACCESS read-only STATUS current DESCRIPTION "The frame contents of the first received frame - next 1024 bytes. This object does not exist if the ecpaControlTestStatus indicates initial state." ::= { ecpaTestStreamEntry 45 } ecpaTestStreamMonRxBitRate OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The object provides the average bit rate on the ECPA test stream." ::= { ecpaTestStreamEntry 46 } ecpaTestStreamInnerVlan2Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the second(inner) VLAN specification, in the case of a 3-tagged ECPA stream. If a three tagged ECPA stream is desired, this indicates true." ::= { ecpaTestStreamEntry 47 } ecpaTestStreamInnerVlan2Id OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-only STATUS current DESCRIPTION "This variable provides the Inner (second) VLAN Id associated with the ECPA stream. Valid only if ecpaTestStreamInnerVlan2Enabled is enabled." ::= { ecpaTestStreamEntry 48 } ecpaTestStreamInnerVlan2Prio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-only STATUS current DESCRIPTION "This variable provides the Inner (second) VLAN Priority associated with the ECPA stream. Valid only if ecpaTestStreamInnerVlan2Enabled is enabled." ::= { ecpaTestStreamEntry 49 } ecpaTestStreamInnerVlan2EtherType OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable provides the EtherType associated with the Inner (second) VLAN Tag. Valid only if ecpaTestStreamInnerVlan2Enabled is enabled." ::= { ecpaTestStreamEntry 50 } ecpaTestStreamDestIpV4Address OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the destination ipv4 IP Address for the test stream. This is valid when ecpaTestStreamIpVersion is ipv4." ::= { ecpaTestStreamEntry 51 } ecpaTestStreamDestIpV6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the destination ipv6 IP Address for the test stream. This is valid when ecpaTestStreamIpVersion is ipv6." ::= { ecpaTestStreamEntry 52 } ecpaTestStreamConfigChanged OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides information on whether the associated ecpaConfigStream is changed." ::= { ecpaTestStreamEntry 53 } ecpaTestStreamRateHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The object enables specification of the higher 32 bits of the traffic generation rate." ::= { ecpaTestStreamEntry 54 } ecpaTestStreamUdpControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables or disables UDP header." ::= { ecpaTestStreamEntry 55 } ecpaTestStreamUdpSrcPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "When UDP control is enabled, this object provides the UDP source port. Otherwize it is ignored." ::= { ecpaTestStreamEntry 56 } ecpaTestStreamUdpDstPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "When UDP control is enabled, this object provides the UDP destination port. Otherwize it is ignored." ::= { ecpaTestStreamEntry 57 } -- -- ESA Probe Table -- esaProbeTable OBJECT-TYPE SYNTAX SEQUENCE OF EsaProbeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to ESA Probes." ::= { cmServAssuranceObjects 4 } esaProbeEntry OBJECT-TYPE SYNTAX EsaProbeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the esaProbeTable. Entries can be created in this table by management application action. The slotIndex should be 255 if the product is cm5.1." INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex } ::= { esaProbeTable 1 } EsaProbeEntry ::= SEQUENCE { -- identification esaProbeIndex Integer32, esaProbeName DisplayString, esaProbeSourcePort VariablePointer, esaProbeAssocSchedGroup VariablePointer, esaProbeDirection EsaProbeDirection, -- protocol, end-points esaProbeProtocol EsaProbeProtocol, esaProbeSrcIpAddress IpAddress, esaProbeSrcSubnetMask IpAddress, esaProbeDestIpAddress IpAddress, esaProbeSrcMep VariablePointer, esaProbeDestMepType MepDestinationType, esaProbeDestMepMacAddr MacAddress, esaProbeDestMepId Dot1agCfmMepIdOrZero, -- service params esaProbeVlanTagEnabled TruthValue, esaProbeVlanTagEtherType Unsigned32, esaProbeVlanId VlanId, esaProbeVlanPrio VlanPriority, esaProbeInnerVlanTagEnabled TruthValue, esaProbeInnerVlanTagEtherType Unsigned32, esaProbeInnerVlanId VlanId, esaProbeInnerVlanPrio VlanPriority, esaProbeIpPrioMapMode IpPriorityMapMode, esaProbeIpPriority Integer32, --sched params esaProbePktsPerSample Integer32, esaProbePktSize Integer32, esaProbeInterPktGap Integer32, esaProbePktDeadInterval Integer32, esaProbeResponseTimeout Integer32, esaProbeY1731DmmPktSize Integer32, esaProbeY1731LmmInterval EsaProbePktIntervalType, esaProbeY1731DmmInterval EsaProbePktIntervalType, --history config esaProbeHistoryBins Integer32, esaProbeHistoryInterval EsaProbeHistoryIntervalType, esaProbeDistHistoryBins Integer32, esaProbeDistHistoryInterval EsaProbeHistoryIntervalType, --general params esaProbeCreationTime DateAndTime, -- probe creation params esaProbeStorageType StorageType, esaProbeRowStatus RowStatus, -- multi-cos, multi-dest params esaProbeMultiCOSEnabled TruthValue, esaProbeSLAMonitorType EsaProbeSLAMonitorType, esaProbeCOSType ClassOfServiceType, esaProbeSLMMulticastMACEnabled TruthValue, esaProbeSOAMInterval EsaProbePktIntervalType, esaProbeSOAMPktSize Integer32, --added for cm5.1 esaProbeInner2VlanTagEnabled TruthValue, esaProbeInner2VlanTagEtherType Unsigned32, esaProbeInner2VlanId VlanId, esaProbeInner2VlanPrio VlanPriority, -- State Management params esaProbeAdminState AdminState, esaProbeOperationalState OperationalState, esaProbeSecondaryState SecondaryState, esaProbeMacAddress MacAddress, esaProbeAlias DisplayString } esaProbeIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this ESA Probe within a Card." ::= { esaProbeEntry 1 } esaProbeName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "A unique identifier used by the Manager to distinguish the ESA Probe." ::= { esaProbeEntry 2 } esaProbeSourcePort OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This object points to the Port to which the ESA Probe is attached, i.e.on which the service to be monitored resides." ::= { esaProbeEntry 3 } esaProbeAssocSchedGroup OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "This object points to the probe's associated Scheduled Group. Initially, when the probe is not associated with a Group, this object's value is set to {0.0}." ::= { esaProbeEntry 4 } esaProbeDirection OBJECT-TYPE SYNTAX EsaProbeDirection MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows to specify the direction of Probe traffic generation." ::= { esaProbeEntry 5 } esaProbeProtocol OBJECT-TYPE SYNTAX EsaProbeProtocol MAX-ACCESS read-create STATUS current DESCRIPTION "Protocol to be used in ESA Probe messages. 'icmpTimestamp', 'icmpEcho', 'udpEcho' protocols support layer-3 ethernet service assurance. If the remote reflector is an ADVA equipment based on CM family of products, one-way loss measurement, one-way delay measurement, round-trip delay measurement and one-way jitter measurements are computed. Else, only round-trip delay measurements are applicable. 'y1731' protocol can be used for layer-2 ethernet service assurance. One-way loss measurement, one-way and round-trip delay measurement, and one-way jitter measurements are available for this protocol. 'y1731-slm-slr' protocol can be used for layer-2 ethernet service assurance using Synthetic Loss Measurement messages. One-way loss measurement, one-way and round-trip delay measurement, and one-way jitter measurements are available for this protocol." ::= { esaProbeEntry 6 } esaProbeSrcIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Variable that allows specification of the Probe's source IP Address. This IP Address is used in the IP header of the ESA Probe generated packets, as source address. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 7 } esaProbeSrcSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Variable that allows specification of the Probe's source IP Subnet Mask. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 8 } esaProbeDestIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Variable that allows specification of the Reflector's destination IP Address. This IP Address is used in the IP header of the ESA Probe generated packets, as destination address. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 9 } esaProbeSrcMep OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is applicable only for Y.1731 probes. It identifies the source MEP that initiates the Y.1731 LMMs and DMMs." ::= { esaProbeEntry 10 } esaProbeDestMepType OBJECT-TYPE SYNTAX MepDestinationType MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is applicable only for Y.1731 probes. This indicates if the destination MEP is specified using the MEP ID object esaProbeDestMepId." ::= { esaProbeEntry 11 } esaProbeDestMepMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is applicable only for Y.1731 probes. It identifies the destination MEP that responds to the LMMs and DMMs. This MAC address will be the destination MAC address for LMM and DMM frames if esaProbeY1731DestMepType is 'macaddress'. If CC protocol is not enabled between source and destination MEP then this is the only choice to identify the remote MEP." ::= { esaProbeEntry 12 } esaProbeDestMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is applicable only for Y.1731 probes. It identifies the destination MEP that responds to the LMMs and DMMs. The MAC address of this RMEP ID from RMEP database will be the destination MAC address for LMM and DMM. This value is used only if the esaProbeY1731DestMepType is 'mepid'. CC protocol must be enabled between source and destination MEP if the RMEP ID is used to identify the Remote MEP." ::= { esaProbeEntry 13 } esaProbeVlanTagEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Ability to specify whether or not to use VLAN tagged or untagged ESA traffic generation on the Probe. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 14 } esaProbeVlanTagEtherType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable allows the user to specify the monitored service's VLAN tag Ether Type. Valid if 'esaProbeVlanTagEnabled' is specified as TRUE. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 15 } esaProbeVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This variable allows the user to specify the monitored service's VLAN tag. Valid if 'esaProbeVlanTagEnabled' is specified as TRUE. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 16 } esaProbeVlanPrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This variable allows the user to specify the monitored service's VLAN priority. Valid if 'esaProbeVlanTagEnabled' is specified as TRUE. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 17 } esaProbeInnerVlanTagEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Ability to specify whether or not to use Inner VLAN tag. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 18 } esaProbeInnerVlanTagEtherType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable allows the user to specify the monitored service's Inner VLAN tag Ether Type. Valid if 'esaProbeInnerVlanTagEnabled' is specified as TRUE. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 19 } esaProbeInnerVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This variable allows the user to specify the monitored service's Inner VLAN tag. Valid if 'esaProbeInnerVlanTagEnabled' is specified as TRUE. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 20 } esaProbeInnerVlanPrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This variable allows the user to specify the monitored service's Inner VLAN priority. Valid if 'esaProbeInnerVlanTagEnabled' is specified as TRUE. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 21 } esaProbeIpPrioMapMode OBJECT-TYPE SYNTAX IpPriorityMapMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of Priority Mapping Mode for the ESA Probe. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 22 } esaProbeIpPriority OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of Priority Value for esaProbePrioMapMode as priomap-tos,priomap-dscp. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 23 } esaProbePktsPerSample OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of number of packets within a sample run for ESA traffic generation. A non-zero value must be specified. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 24 } esaProbePktSize OBJECT-TYPE SYNTAX Integer32 (0|64..2000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of fixed length frame size in bytes for ESA traffic generation. If not specified, default value of 104 bytes is used. NOTE: This attribute is not available to Y.1731 probes." ::= { esaProbeEntry 25 } esaProbeInterPktGap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of interval in milliseconds between packet generation. A non-zero value must be specified. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 26 } esaProbePktDeadInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of the dead interval in seconds after 'esaProbePktsPerSample' have been generated within the sample. This allows for settling time of the ESA traffic. A non-zero value must be specified. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 27 } esaProbeResponseTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the timeout value to determine lost packets. Time specified in seconds. NOTE: This attribute is not applicable to Y.1731 probes. This object is applicable to Layer 3 and SLM/SLR Probes." ::= { esaProbeEntry 28 } esaProbeY1731DmmPktSize OBJECT-TYPE SYNTAX Integer32 (0|64..9600) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is only applicable to Y.1731 probes. This object enables specification of the TLV size for Delay Measurement Frames (DMMs). Value of 0 is a read-only value when the Probe protocol is not y1731. GE206 Release 4.4.x supports 2000 bytes" ::= { esaProbeEntry 29 } esaProbeY1731LmmInterval OBJECT-TYPE SYNTAX EsaProbePktIntervalType MAX-ACCESS read-create STATUS current DESCRIPTION "LMM frame transmission period. For Loss Measurement Frames, only interval-1sec is supported. This attribute is only applicable to Y.1731 probes." DEFVAL { interval-1sec } ::= { esaProbeEntry 30 } esaProbeY1731DmmInterval OBJECT-TYPE SYNTAX EsaProbePktIntervalType MAX-ACCESS read-create STATUS current DESCRIPTION "DMM frame transmission period. This attribute is only applicable to Y.1731 probes." DEFVAL { interval-100ms } ::= { esaProbeEntry 31 } esaProbeHistoryBins OBJECT-TYPE SYNTAX Integer32 (0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of number of history bins. This is the total history data that will be maintained for an ESA Probe run, at any instance." ::= { esaProbeEntry 32 } esaProbeHistoryInterval OBJECT-TYPE SYNTAX EsaProbeHistoryIntervalType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the history interval period." ::= { esaProbeEntry 33 } esaProbeDistHistoryBins OBJECT-TYPE SYNTAX Integer32 (0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of number of distribution history bins. This is the total history distribution data that will be maintained for an ESA Probe run, at any instance." ::= { esaProbeEntry 34 } esaProbeDistHistoryInterval OBJECT-TYPE SYNTAX EsaProbeHistoryIntervalType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the history distribution interval period." ::= { esaProbeEntry 35 } esaProbeCreationTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the creation time of the ESA Probe." ::= { esaProbeEntry 36 } esaProbeStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { esaProbeEntry 37 } esaProbeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of esaProbeRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with esaProbeRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The esaProbeRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { esaProbeEntry 38 } esaProbeMultiCOSEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is introduced for FSP150CC Release 4.3. This object is only applicable for Y.1731 and SLM-SLR Probe Protocol Types. This object can be used to specify the multiple class of services (COS) for each ESA Probe." ::= { esaProbeEntry 39 } esaProbeSLAMonitorType OBJECT-TYPE SYNTAX EsaProbeSLAMonitorType MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the Probe is a point-to-point type or a point-to-multipoint type. Only SLM-SLR probes can be point-to-multipoint." ::= { esaProbeEntry 40 } esaProbeCOSType OBJECT-TYPE SYNTAX ClassOfServiceType MAX-ACCESS read-create STATUS current DESCRIPTION "This object can be used to specify the first Class of Service associated with the Y.1731/SLM-SLR ESA Probe. In the case of a multiCOS Probe, this object has no semantics when multiple COS levels exist. This object is only valid for Y.1731/SLM-SLR ESA Probes." ::= { esaProbeEntry 41 } esaProbeSLMMulticastMACEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object can be used to specify whether the SLM/SLR protocol Probe will use multicast MAC address in SLM (Synthetic Loss Measurement) messages. This object is only valid for SLM-SLR ESA Probes." ::= { esaProbeEntry 42 } esaProbeSOAMInterval OBJECT-TYPE SYNTAX EsaProbePktIntervalType MAX-ACCESS read-create STATUS current DESCRIPTION "This object can be used to specify the packet interval type for Y.1731 LM/DM and SLM/SLR based ESA Probes, for the first Class of Service. In the case of a multiCOS Probe, this object has no semantics when multiple COS levels exist. This attribute is applicable for Y.1731 LM/DM and SLM/SLR based probes." ::= { esaProbeEntry 43 } esaProbeSOAMPktSize OBJECT-TYPE SYNTAX Integer32 (0|64..9612) MAX-ACCESS read-write STATUS current DESCRIPTION "This object can be used to specify the packet size for SLM-SLR based ESA Probes, for the first Class of Service. In the case of multiCOS Probe, this object has no semantics when multiple COS levels exist. In such cases this will return a value of 0." ::= { esaProbeEntry 44 } esaProbeInner2VlanTagEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Ability to specify whether or not to use Inner2 VLAN tag. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 45 } esaProbeInner2VlanTagEtherType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable allows the user to specify the monitored service's Inner2 VLAN tag Ether Type. Valid if 'esaProbeInner2VlanTagEnabled' is specified as TRUE. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 46 } esaProbeInner2VlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This variable allows the user to specify the monitored service's Inner2 VLAN tag. Valid if 'esaProbeInner2VlanTagEnabled' is specified as TRUE. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 47 } esaProbeInner2VlanPrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "This variable allows the user to specify the monitored service's Inner2 VLAN priority. Valid if 'esaProbeInner2VlanTagEnabled' is specified as TRUE. NOTE: This attribute is not applicable to Y.1731 probes." ::= { esaProbeEntry 48 } -- State Management params esaProbeAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Administrative State of the ESA Probe. This is not externally managed." ::= { esaProbeEntry 49 } esaProbeOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the ESA Probe." ::= { esaProbeEntry 50 } esaProbeSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the ESA Probe." ::= { esaProbeEntry 51 } esaProbeMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is applicable only for Y.1731 probes. It identifies the destination MacAddress which esa using " ::= { esaProbeEntry 52 } esaProbeAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows SNMP management entities to provide an alias for an ESA Probe." ::= { esaProbeEntry 53 } -- -- ESA Probe Schedule Group Table -- esaProbeScheduleGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF EsaProbeScheduleGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries that allow groups of ESA Probes to be scheduled." ::= { cmServAssuranceObjects 5 } esaProbeScheduleGroupEntry OBJECT-TYPE SYNTAX EsaProbeScheduleGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in esaProbeScheduleGroupTable. Entries are created in this table by management application action." INDEX { neIndex, shelfIndex, slotIndex, esaProbeScheduleGroupIndex } ::= { esaProbeScheduleGroupTable 1 } EsaProbeScheduleGroupEntry ::= SEQUENCE { esaProbeScheduleGroupIndex Integer32, esaProbeScheduleGroupDescr DisplayString, esaProbeScheduleGroupProbeList DisplayString, esaProbeScheduleGroupType ScheduleType, esaProbeScheduleGroupStartTime DateAndTime, esaProbeScheduleGroupDuration Unsigned32, esaProbeScheduleGroupInterval Unsigned32, esaProbeScheduleGroupAction EsaAction, esaProbeScheduleGroupStatus SchedActivityStatus, esaProbeScheduleGroupStorageType StorageType, esaProbeScheduleGroupRowStatus RowStatus, esaProbeScheduleGroupActionProbeList DisplayString } esaProbeScheduleGroupIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "A unique index to distinguish the ESA Probe Schedule Group." ::= { esaProbeScheduleGroupEntry 1 } esaProbeScheduleGroupDescr OBJECT-TYPE SYNTAX DisplayString (SIZE(1..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "Description of the probe schedule group." ::= { esaProbeScheduleGroupEntry 2 } esaProbeScheduleGroupProbeList OBJECT-TYPE SYNTAX DisplayString (SIZE(1..512)) MAX-ACCESS read-create STATUS current DESCRIPTION "A comma separated list of esaProbeName's, that will have the same schedule." ::= { esaProbeScheduleGroupEntry 3 } esaProbeScheduleGroupType OBJECT-TYPE SYNTAX ScheduleType MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows to specify whether the ESA probe group schedule is 'one-shot' or 'periodic'. A 'one-shot' schedule executes only once and then stops. A 'periodic' schedule reoccurs every 'esaProbeScheduleGroupInterval' seconds and continues until explicitly stopped." ::= { esaProbeScheduleGroupEntry 4 } esaProbeScheduleGroupStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the start time of the ESA Probe Group. Value of time less than current system time will equate to current time. When the system time reaches this configured time, the ESA Probe Group will be activated." ::= { esaProbeScheduleGroupEntry 5 } esaProbeScheduleGroupDuration OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the duration in 'seconds' for ESA Probe Group run. Note that a value of 4294967295 means Duration as FOREVER. FOREVER value is only applicable to schedule type oneshot. The value 4294967295 cannot be used if schedule type is periodic." ::= { esaProbeScheduleGroupEntry 6 } esaProbeScheduleGroupInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the interval in 'seconds' between successive runs for ESA Probe Group. This variable is only valid if the 'esaProbeScheduleGroupType' is 'periodic'." ::= { esaProbeScheduleGroupEntry 7 } esaProbeScheduleGroupAction OBJECT-TYPE SYNTAX EsaAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to suspend/resume the ESA scheduled group." ::= { esaProbeScheduleGroupEntry 8 } esaProbeScheduleGroupStatus OBJECT-TYPE SYNTAX SchedActivityStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current status of the ESA Probe Group." ::= { esaProbeScheduleGroupEntry 9 } esaProbeScheduleGroupStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { esaProbeScheduleGroupEntry 10 } esaProbeScheduleGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of esaProbeScheduleGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with esaProbeRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The esaProbeScheduleGroupRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { esaProbeScheduleGroupEntry 11 } esaProbeScheduleGroupActionProbeList OBJECT-TYPE SYNTAX DisplayString (SIZE(1..512)) MAX-ACCESS read-write STATUS current DESCRIPTION "A comma separated list of esaProbeName's, if set esaProbeScheduleGroupAction as add or remove, they will be add or remove from esaProbeScheduleGroupProbeList." ::= { esaProbeScheduleGroupEntry 12 } -- -- ESA Reflector Table -- esaReflectorTable OBJECT-TYPE SYNTAX SEQUENCE OF EsaReflectorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to ESA Reflectors. NOTE: There is no need to create reflectors for Y.1731 probes as the MEPs will respond by default." ::= { cmServAssuranceObjects 6 } esaReflectorEntry OBJECT-TYPE SYNTAX EsaReflectorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the esaReflectorTable. Entries can be created in this table by management application action." INDEX { neIndex, shelfIndex, slotIndex, esaReflectorIndex } ::= { esaReflectorTable 1 } EsaReflectorEntry ::= SEQUENCE { esaReflectorIndex Integer32, esaReflectorName DisplayString, esaReflectorIpAddress IpAddress, esaReflectorSubnetMask IpAddress, esaReflectorSourcePort VariablePointer, esaReflectorIpPrioMapMode IpPriorityMapMode, esaReflectorIpPriority Integer32, esaReflectorAction EsaAction, esaReflectorSuspended TruthValue, esaReflectorCreationTime DateAndTime, esaReflectorStorageType StorageType, esaReflectorRowStatus RowStatus, esaReflectorDirection EsaReflectorDirection, esaReflectorAdminState AdminState, esaReflectorOperationalState OperationalState, esaReflectorSecondaryState SecondaryState, esaReflectorMacAddress MacAddress, esaReflectorAlias DisplayString } esaReflectorIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "A unique index to distinguish the ESA Reflector." ::= { esaReflectorEntry 1 } esaReflectorName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "A unique identifier to distinguish the ESA Reflector." ::= { esaReflectorEntry 2 } esaReflectorIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Reflector's IP Address. Reflector listens for packets destined at this IP Address." ::= { esaReflectorEntry 3 } esaReflectorSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Reflector's IP Subnet mask." ::= { esaReflectorEntry 4 } esaReflectorSourcePort OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This object points to the Port to which the ESA Reflector is attached, i.e.on which the service to be monitored resides." ::= { esaReflectorEntry 5 } esaReflectorIpPrioMapMode OBJECT-TYPE SYNTAX IpPriorityMapMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of Priority Mapping Mode for the ESA Reflector." ::= { esaReflectorEntry 6 } esaReflectorIpPriority OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of Priority Value for esaReflectorPrioMapMode as priomap-tos,priomap-dscp." ::= { esaReflectorEntry 7 } esaReflectorAction OBJECT-TYPE SYNTAX EsaAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows to suspend/resume the ESA reflector." ::= { esaReflectorEntry 8 } esaReflectorSuspended OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the ESA Reflector is active or suspended." ::= { esaReflectorEntry 9 } esaReflectorCreationTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the creation time of the ESA Reflector." ::= { esaReflectorEntry 10 } esaReflectorStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { esaReflectorEntry 11 } esaReflectorRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of esaReflectorRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with esaReflectorRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The esaReflectorRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { esaReflectorEntry 12 } esaReflectorDirection OBJECT-TYPE SYNTAX EsaReflectorDirection MAX-ACCESS read-create STATUS current DESCRIPTION "This object provides the direction of the ESA Reflector." ::= { esaReflectorEntry 13 } -- State Management params esaReflectorAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Administrative State of the ESA Reflector. This is not externally managed." ::= { esaReflectorEntry 14 } esaReflectorOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the ESA Reflector." ::= { esaReflectorEntry 15 } esaReflectorSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the ESA Reflector." ::= { esaReflectorEntry 16 } esaReflectorMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is applicable only for Y.1731 probes. It identifies the destination MacAddress which esa using " ::= { esaReflectorEntry 17 } esaReflectorAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows SNMP management entities to provide an alias for an ESA Reflector." ::= { esaReflectorEntry 18 } -- -- ESA Probe Current Statistics Table -- esaProbeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF EsaProbeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of ESA Probe related statistics kept for a particular ESA Probe entity. These reflect the current data." ::= { cmServAssuranceObjects 7 } esaProbeStatsEntry OBJECT-TYPE SYNTAX EsaProbeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the esaProbeStatsTable. An entry exists in this table for each ESA Probe." INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex, esaProbeStatsDestinationIndex, esaProbeStatsCOSIndex, esaProbeStatsIndex } ::= { esaProbeStatsTable 1 } EsaProbeStatsEntry ::= SEQUENCE { esaProbeStatsDestinationIndex Integer32, esaProbeStatsCOSIndex Integer32, esaProbeStatsIndex Integer32, esaProbeStatsIntervalType EsaProbePmIntervalType, esaProbeStatsCOS ClassOfServiceType, esaProbeStatsValid TruthValue, esaProbeStatsAction CmPmBinAction, esaProbeStatsP2RPkts PerfCounter64, esaProbeStatsP2RErredPkts PerfCounter64, esaProbeStatsP2RSyncErrs PerfCounter64, esaProbeStatsP2RLostPkts PerfCounter64, esaProbeStatsR2PPkts PerfCounter64, esaProbeStatsR2PErredPkts PerfCounter64, esaProbeStatsR2PSyncErrs PerfCounter64, esaProbeStatsR2PLostPkts PerfCounter64, esaProbeStatsLostPkts PerfCounter64, esaProbeStatsSeqGaps PerfCounter64, esaProbeStatsOutOfSeqErrs PerfCounter64, esaProbeStatsMinRoundTripDelay Unsigned32, esaProbeStatsMaxRoundTripDelay Unsigned32, esaProbeStatsAvgRoundTripDelay Unsigned32, esaProbeStatsSumRoundTripDelay PerfCounter64, esaProbeStatsSumOfSqRoundTripDelay PerfCounter64, esaProbeStatsMinOnewayP2RDelay Unsigned32, esaProbeStatsMaxOnewayP2RDelay Unsigned32, esaProbeStatsAvgOnewayP2RDelay Unsigned32, esaProbeStatsSumOnewayP2RDelay PerfCounter64, esaProbeStatsSumOfSqOnewayP2RDelay PerfCounter64, esaProbeStatsMinOnewayR2PDelay Unsigned32, esaProbeStatsMaxOnewayR2PDelay Unsigned32, esaProbeStatsAvgOnewayR2PDelay Unsigned32, esaProbeStatsSumOnewayR2PDelay PerfCounter64, esaProbeStatsSumOfSqOnewayR2PDelay PerfCounter64, esaProbeStatsMinPosP2RJitter Unsigned32, esaProbeStatsMaxPosP2RJitter Unsigned32, esaProbeStatsNumPosP2RJitter PerfCounter64, esaProbeStatsSumPosP2RJitter PerfCounter64, esaProbeStatsSumOfSqPosP2RJitter PerfCounter64, esaProbeStatsMinNegP2RJitter Unsigned32, esaProbeStatsMaxNegP2RJitter Unsigned32, esaProbeStatsNumNegP2RJitter PerfCounter64, esaProbeStatsSumNegP2RJitter PerfCounter64, esaProbeStatsSumOfSqNegP2RJitter PerfCounter64, esaProbeStatsMinPosR2PJitter Unsigned32, esaProbeStatsMaxPosR2PJitter Unsigned32, esaProbeStatsNumPosR2PJitter PerfCounter64, esaProbeStatsSumPosR2PJitter PerfCounter64, esaProbeStatsSumOfSqPosR2PJitter PerfCounter64, esaProbeStatsMinNegR2PJitter Unsigned32, esaProbeStatsMaxNegR2PJitter Unsigned32, esaProbeStatsNumNegR2PJitter PerfCounter64, esaProbeStatsSumNegR2PJitter PerfCounter64, esaProbeStatsSumOfSqNegR2PJitter PerfCounter64, esaProbeStatsY1731P2RNegLossOccurrences PerfCounter64, esaProbeStatsY1731R2PNegLossOccurrences PerfCounter64, esaProbeStatsY1731RxLmSamples TruthValue, esaProbeStatsY1731RxDmSamples TruthValue, esaProbeStatsY1731P2RFrames PerfCounter64, esaProbeStatsY1731R2PFrames PerfCounter64, -- following introduced in R4.4CC esaProbeStatsAvgAbsP2RJitter Unsigned32, esaProbeStatsAvgAbsR2PJitter Unsigned32, esaProbeStatsMaxAbsP2RJitter Unsigned32, esaProbeStatsMaxAbsR2PJitter Unsigned32, esaProbeStatsMinAbsP2RJitter Unsigned32, esaProbeStatsMinAbsR2PJitter Unsigned32, esaProbeStatsNumAbsP2RJitter PerfCounter64, esaProbeStatsNumAbsR2PJitter PerfCounter64, esaProbeStatsSumAbsP2RJitter PerfCounter64, esaProbeStatsSumAbsR2PJitter PerfCounter64, esaProbeStatsSumOfSqAbsP2RJitter PerfCounter64, esaProbeStatsSumOfSqAbsR2PJitter PerfCounter64 } esaProbeStatsDestinationIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify a destination (Reflector) Index, in a point-to-multi point SLA. For Release 4.1 GE206, this value is 1, since only point-to-point SLA is supported." ::= { esaProbeStatsEntry 1 } esaProbeStatsCOSIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify SLA for a specific Class of Service. For Release 4.1 GE206, this value is 1, since the COS is explicitly specified in the Probe parameters." ::= { esaProbeStatsEntry 2 } esaProbeStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this ESA Probe statistics entry. Index 1 corresponds to current and index 2 to rollover." ::= { esaProbeStatsEntry 3 } esaProbeStatsIntervalType OBJECT-TYPE SYNTAX EsaProbePmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the type of collection, i.e. whether it is current, or rollover." ::= { esaProbeStatsEntry 4 } esaProbeStatsCOS OBJECT-TYPE SYNTAX ClassOfServiceType MAX-ACCESS read-only STATUS current DESCRIPTION "The Class of Service. For Release 4.1 GE206, this value is cos-not-applicable, since multi COS SLA is not supported." ::= { esaProbeStatsEntry 5 } esaProbeStatsValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { esaProbeStatsEntry 6 } esaProbeStatsAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { esaProbeStatsEntry 7 } esaProbeStatsP2RPkts OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Transmitted Packets in the current interval. In the case of Y.1731 probes, this reflects the number of DMRs (Delay Measurement Replies) received and this will always be the same as the esaProbeStatsR2PPkts." ::= { esaProbeStatsEntry 8 } esaProbeStatsP2RErredPkts OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Packets in the current interval, for which there was a problem in transmission. This error is counted when there is a failure in packet transmission due to resource limitations (buffers). This can happen if the Probe Configuration was changed to send in a large number of packets in a time interval. NOTE: This is not applicable for Y.1731 probes." ::= { esaProbeStatsEntry 9 } esaProbeStatsP2RSyncErrs OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of (time) Synchronization Errors from probe to reflector in the current interval." ::= { esaProbeStatsEntry 10 } esaProbeStatsP2RLostPkts OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Lost Pkts from probe to reflector in the current interval. For Y.1731 probes, these are the actual data frames lost." ::= { esaProbeStatsEntry 11 } esaProbeStatsR2PPkts OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Received Packets in the current interval. In the case of Y.1731 probes, this reflects the number of DMRs (Delay Measurement Replies) received and this will always be the same as the esaProbeStatsP2RPkts." ::= { esaProbeStatsEntry 12 } esaProbeStatsR2PErredPkts OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Received Packets in the current interval, which had errors such as length of received packet is less than the protocol header length, packet was received after it was marked as lost (i.e.beyond timeout). NOTE: This is not applicable for Y.1731 probes." ::= { esaProbeStatsEntry 13 } esaProbeStatsR2PSyncErrs OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of (time) Synchronization Errors from reflector to probe in the current interval." ::= { esaProbeStatsEntry 14 } esaProbeStatsR2PLostPkts OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Lost Pkts from reflector to probe in the current interval. For Y.1731 probes, these are the actual data frames lost." ::= { esaProbeStatsEntry 15 } esaProbeStatsLostPkts OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Lost Packets in the current interval. Packets which are not received from the reflector end beyond the configured timeout value are termed as lost. NOTE: This is not applicable for Y.1731 probes." ::= { esaProbeStatsEntry 16 } esaProbeStatsSeqGaps OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of sequence gaps across all packets received in the current interval. If (Received Seq Number) is greater than or equal to (Last Received Seq Number + 2)) it is termed as a sequence gap. NOTE: This is not applicable for Y.1731 probes." ::= { esaProbeStatsEntry 17 } esaProbeStatsOutOfSeqErrs OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of out of sequence errors across all packets received in the current interval. If (Received Seq Number) is less than or equal to (Last Received Seq Number), it is termed as out of sequence error. NOTE: This is not applicable for Y.1731 probes." ::= { esaProbeStatsEntry 18 } esaProbeStatsMinRoundTripDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum round-trip delay(in microseconds) across all packets received in the current interval. The reflector's processing time is excluded from the value." ::= { esaProbeStatsEntry 19 } esaProbeStatsMaxRoundTripDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum round-trip delay(in microseconds) across all packets received in the current interval. The reflector's processing time is excluded from the value." ::= { esaProbeStatsEntry 20 } esaProbeStatsAvgRoundTripDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average round-trip delay(in microseconds) across all packets received in the current interval. The reflector's processing time is excluded from the value." ::= { esaProbeStatsEntry 21 } esaProbeStatsSumRoundTripDelay OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total sum of round trip delay(in microseconds) in the current interval. The reflector's processing time is excluded from the value." ::= { esaProbeStatsEntry 22 } esaProbeStatsSumOfSqRoundTripDelay OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of square of round trip delays in the current interval." ::= { esaProbeStatsEntry 23 } esaProbeStatsMinOnewayP2RDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum one-way source to destination delay(in microseconds) across all packets received in the current interval." ::= { esaProbeStatsEntry 24 } esaProbeStatsMaxOnewayP2RDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum one-way source to destination delay(in microseconds) across all packets received in the current interval." ::= { esaProbeStatsEntry 25 } esaProbeStatsAvgOnewayP2RDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average one-way source to destination delay(in microseconds) across all packets received in the current interval." ::= { esaProbeStatsEntry 26 } esaProbeStatsSumOnewayP2RDelay OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total sum of one-way delay from source to destination in the current interval." ::= { esaProbeStatsEntry 27 } esaProbeStatsSumOfSqOnewayP2RDelay OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of square of one-way delay from source to destination in the current interval." ::= { esaProbeStatsEntry 28 } esaProbeStatsMinOnewayR2PDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum one-way destination to source delay(in microseconds) across all packets received in the current interval." ::= { esaProbeStatsEntry 29 } esaProbeStatsMaxOnewayR2PDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum one-way destination to source delay(in microseconds) across all packets received in the current interval." ::= { esaProbeStatsEntry 30 } esaProbeStatsAvgOnewayR2PDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average one-way destination to source delay(in microseconds) across all packets received in the current interval." ::= { esaProbeStatsEntry 31 } esaProbeStatsSumOnewayR2PDelay OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total sum of one-way delay from destination to source in the current interval." ::= { esaProbeStatsEntry 32 } esaProbeStatsSumOfSqOnewayR2PDelay OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of square of one-way delay from destination to source in the current interval." ::= { esaProbeStatsEntry 33 } esaProbeStatsMinPosP2RJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum positive one-way jitter from source to destination in the current interval." ::= { esaProbeStatsEntry 34 } esaProbeStatsMaxPosP2RJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum positive one-way jitter from source to destination in the current interval." ::= { esaProbeStatsEntry 35 } esaProbeStatsNumPosP2RJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of positive one-way jitters from source to destination in the current interval." ::= { esaProbeStatsEntry 36 } esaProbeStatsSumPosP2RJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total sum of positive one-way jitters from source to destination in the current interval." ::= { esaProbeStatsEntry 37 } esaProbeStatsSumOfSqPosP2RJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of square of positive one-way jitters from source to destination in the current interval." ::= { esaProbeStatsEntry 38 } esaProbeStatsMinNegP2RJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum negative one-way jitter from source to destination in the current interval." ::= { esaProbeStatsEntry 39 } esaProbeStatsMaxNegP2RJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum negative one-way jitter from source to destination in the current interval." ::= { esaProbeStatsEntry 40 } esaProbeStatsNumNegP2RJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of negative one-way jitters from source to destination in the current interval." ::= { esaProbeStatsEntry 41 } esaProbeStatsSumNegP2RJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total sum of negative one-way jitters from source to destination in the current interval." ::= { esaProbeStatsEntry 42 } esaProbeStatsSumOfSqNegP2RJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of square of negative one-way jitters from source to destination in the current interval." ::= { esaProbeStatsEntry 43 } esaProbeStatsMinPosR2PJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum positive one-way jitter from destination to source in the current interval." ::= { esaProbeStatsEntry 44 } esaProbeStatsMaxPosR2PJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum positive one-way jitter from destination to source in the current interval." ::= { esaProbeStatsEntry 45 } esaProbeStatsNumPosR2PJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of positive one-way jitters from destination to source in the current interval." ::= { esaProbeStatsEntry 46 } esaProbeStatsSumPosR2PJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total sum of positive one-way jitters from destination to source in the current interval." ::= { esaProbeStatsEntry 47 } esaProbeStatsSumOfSqPosR2PJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of square of positive one-way jitters from destination to source in the current interval." ::= { esaProbeStatsEntry 48 } esaProbeStatsMinNegR2PJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum negative one-way jitter from destination to source in the current interval." ::= { esaProbeStatsEntry 49 } esaProbeStatsMaxNegR2PJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum negative one-way jitter from destination to source in the current interval." ::= { esaProbeStatsEntry 50 } esaProbeStatsNumNegR2PJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of negative one-way jitters from destination to source in the current interval." ::= { esaProbeStatsEntry 51 } esaProbeStatsSumNegR2PJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total sum of negative one-way jitters from destination to source in the current interval." ::= { esaProbeStatsEntry 52 } esaProbeStatsSumOfSqNegR2PJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of square of negative one-way jitters from destination to source in the current interval." ::= { esaProbeStatsEntry 53 } esaProbeStatsY1731P2RNegLossOccurrences OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Y.1731 probes. This is the number of occurences of negative frame loss from Source MEP (Probe) to Destination MEP (Reflector). If these counts are non-zero then there could be some kind of provisioning mismatch between the Probe MEP and Reflector MEP. Here are some scenarios this can happen: - Probe MEP is configured to count in-profile frames only and the Reflector MEP is configured to count all frames with a mismatch in value for the attribute cfmMepLmCountInProfileFrames. - Probe MEP is configured to count data frames for specific VLAN priority and the Reflector MEP is configured to count data frames for all the priorities with a mismatch in values for the attributes cfmMepLmTxCountAllPrios or cfmMepLmRxCountAllPrios. NOTE: This could possibly happen due to reasons not related to configuration such as frame reordering in the network." ::= { esaProbeStatsEntry 54 } esaProbeStatsY1731R2PNegLossOccurrences OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Y.1731 probes. This is the number of occurences of negative frame loss from to Destination MEP (Reflector) to Source MEP (Probe). If these counts are non-zero then there could be some kind of provisioning mismatch between the Probe MEP and Reflector MEP. Here are some scenarios this can happen: - Probe MEP is configured to count in-profile frames only and the Reflector MEP is configured to count all frames with a mismatch in value for the attribute cfmMepLmCountInProfileFrames. - Probe MEP is configured to count data frames for specific VLAN priority and the Reflector MEP is configured to count data frames for all the priorities with a mismatch in values for the attributes cfmMepLmTxCountAllPrios or cfmMepLmRxCountAllPrios. NOTE: This could possibly happen due to reasons not related to configuration such as frame reordering in the network." ::= { esaProbeStatsEntry 55 } esaProbeStatsY1731RxLmSamples OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Y.1731 probes. This flag indicates that at least one loss measurement sample was received for this bin period (LMRs received). This is used by the user to differentiate between valid zero frame loss and not receiving any LMRs." ::= { esaProbeStatsEntry 56 } esaProbeStatsY1731RxDmSamples OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Y.1731 probes. This flag indicates that at least one delay measurement sample was received for this bin period (DMRs received)." ::= { esaProbeStatsEntry 57 } esaProbeStatsY1731P2RFrames OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Y.1731 probes. This is the number of data frames counted by the Source MEP (Probe) that are transmitted towards the Destination MEP (Reflector). Based on the configuration the MEP counts the data frames with: - MEP's LM TX priority or all the priorities - All the VLAN IDs belonging the MEP's MA VID list." ::= { esaProbeStatsEntry 58 } esaProbeStatsY1731R2PFrames OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Y.1731 probes. This is the number of data frames counted by the Destination MEP (Reflector) that are transmitted towards the Source MEP (Probe). Based on the configuration the MEP counts the data frames with: - MEP's LM RX priority or all the priorities - All the VLAN IDs belonging the MEP's MA VID list." ::= { esaProbeStatsEntry 59 } esaProbeStatsAvgAbsP2RJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the average absolute P2R Jitter value. ." ::= { esaProbeStatsEntry 60 } esaProbeStatsAvgAbsR2PJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the average absolute R2P Jitter value. ." ::= { esaProbeStatsEntry 61 } esaProbeStatsMinAbsP2RJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the minimum absolute P2R Jitter value. ." ::= { esaProbeStatsEntry 62 } esaProbeStatsMinAbsR2PJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the minimum absolute R2P Jitter value. ." ::= { esaProbeStatsEntry 63 } esaProbeStatsMaxAbsP2RJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the maximum absolute P2R Jitter value. ." ::= { esaProbeStatsEntry 64 } esaProbeStatsMaxAbsR2PJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the maximum absolute R2P Jitter value. ." ::= { esaProbeStatsEntry 65 } esaProbeStatsNumAbsP2RJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the number of absolute P2R Jitters." ::= { esaProbeStatsEntry 66 } esaProbeStatsNumAbsR2PJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the number of absolute R2P Jitters." ::= { esaProbeStatsEntry 67 } esaProbeStatsSumAbsP2RJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the sum of absolute P2R Jitter values." ::= { esaProbeStatsEntry 68 } esaProbeStatsSumAbsR2PJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the sum of absolute R2P Jitter values." ::= { esaProbeStatsEntry 69 } esaProbeStatsSumOfSqAbsP2RJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the sum of squares of absolute P2R Jitter values." ::= { esaProbeStatsEntry 70 } esaProbeStatsSumOfSqAbsR2PJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the sum of squares of absolute R2P Jitter values." ::= { esaProbeStatsEntry 71 } -- -- ESA Probe Current Statistics Table -- esaProbeHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF EsaProbeHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of ESA Probe related history kept for a particular ESA Probe entity. These reflect the current data." ::= { cmServAssuranceObjects 8 } esaProbeHistoryEntry OBJECT-TYPE SYNTAX EsaProbeHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the esaProbeHistoryTable. An entry exists in this table for each ESA Probe." INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex, esaProbeHistoryDestinationIndex, esaProbeHistoryCOSIndex, esaProbeHistoryIndex } ::= { esaProbeHistoryTable 1 } EsaProbeHistoryEntry ::= SEQUENCE { esaProbeHistoryDestinationIndex Integer32, esaProbeHistoryCOSIndex Integer32, esaProbeHistoryIndex Integer32, esaProbeHistoryTime DateAndTime, esaProbeHistoryValid TruthValue, esaProbeHistoryAction CmPmBinAction, esaProbeHistoryCOS ClassOfServiceType, esaProbeHistoryP2RPkts PerfCounter64, esaProbeHistoryP2RErredPkts PerfCounter64, esaProbeHistoryP2RSyncErrs PerfCounter64, esaProbeHistoryP2RLostPkts PerfCounter64, esaProbeHistoryR2PPkts PerfCounter64, esaProbeHistoryR2PErredPkts PerfCounter64, esaProbeHistoryR2PSyncErrs PerfCounter64, esaProbeHistoryR2PLostPkts PerfCounter64, esaProbeHistoryLostPkts PerfCounter64, esaProbeHistorySeqGaps PerfCounter64, esaProbeHistoryOutOfSeqErrs PerfCounter64, esaProbeHistoryMinRoundTripDelay Unsigned32, esaProbeHistoryMaxRoundTripDelay Unsigned32, esaProbeHistoryAvgRoundTripDelay Unsigned32, esaProbeHistorySumRoundTripDelay PerfCounter64, esaProbeHistorySumOfSqRoundTripDelay PerfCounter64, esaProbeHistoryMinOnewayP2RDelay Unsigned32, esaProbeHistoryMaxOnewayP2RDelay Unsigned32, esaProbeHistoryAvgOnewayP2RDelay Unsigned32, esaProbeHistorySumOnewayP2RDelay PerfCounter64, esaProbeHistorySumOfSqOnewayP2RDelay PerfCounter64, esaProbeHistoryMinOnewayR2PDelay Unsigned32, esaProbeHistoryMaxOnewayR2PDelay Unsigned32, esaProbeHistoryAvgOnewayR2PDelay Unsigned32, esaProbeHistorySumOnewayR2PDelay PerfCounter64, esaProbeHistorySumOfSqOnewayR2PDelay PerfCounter64, esaProbeHistoryMinPosP2RJitter Unsigned32, esaProbeHistoryMaxPosP2RJitter Unsigned32, esaProbeHistoryNumPosP2RJitter PerfCounter64, esaProbeHistorySumPosP2RJitter PerfCounter64, esaProbeHistorySumOfSqPosP2RJitter PerfCounter64, esaProbeHistoryMinNegP2RJitter Unsigned32, esaProbeHistoryMaxNegP2RJitter Unsigned32, esaProbeHistoryNumNegP2RJitter PerfCounter64, esaProbeHistorySumNegP2RJitter PerfCounter64, esaProbeHistorySumOfSqNegP2RJitter PerfCounter64, esaProbeHistoryMinPosR2PJitter Unsigned32, esaProbeHistoryMaxPosR2PJitter Unsigned32, esaProbeHistoryNumPosR2PJitter PerfCounter64, esaProbeHistorySumPosR2PJitter PerfCounter64, esaProbeHistorySumOfSqPosR2PJitter PerfCounter64, esaProbeHistoryMinNegR2PJitter Unsigned32, esaProbeHistoryMaxNegR2PJitter Unsigned32, esaProbeHistoryNumNegR2PJitter PerfCounter64, esaProbeHistorySumNegR2PJitter PerfCounter64, esaProbeHistorySumOfSqNegR2PJitter PerfCounter64, esaProbeHistoryY1731P2RNegLossOccurrences PerfCounter64, esaProbeHistoryY1731R2PNegLossOccurrences PerfCounter64, esaProbeHistoryY1731RxLmSamples TruthValue, esaProbeHistoryY1731RxDmSamples TruthValue, esaProbeHistoryY1731P2RFrames PerfCounter64, esaProbeHistoryY1731R2PFrames PerfCounter64, esaProbeHistoryAvgAbsP2RJitter Unsigned32, esaProbeHistoryAvgAbsR2PJitter Unsigned32, esaProbeHistoryMaxAbsP2RJitter Unsigned32, esaProbeHistoryMaxAbsR2PJitter Unsigned32, esaProbeHistoryMinAbsP2RJitter Unsigned32, esaProbeHistoryMinAbsR2PJitter Unsigned32, esaProbeHistoryNumAbsP2RJitter PerfCounter64, esaProbeHistoryNumAbsR2PJitter PerfCounter64, esaProbeHistorySumAbsP2RJitter PerfCounter64, esaProbeHistorySumAbsR2PJitter PerfCounter64, esaProbeHistorySumOfSqAbsP2RJitter PerfCounter64, esaProbeHistorySumOfSqAbsR2PJitter PerfCounter64 } esaProbeHistoryDestinationIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify a destination (Reflector) Index, in a point-to-multi point SLA. For Release 4.1 GE206, this value is 1, since only point-to-point SLA is supported." ::= { esaProbeHistoryEntry 1 } esaProbeHistoryCOSIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify SLA for a specific Class of Service. For Release 4.1 GE206, this value is 1, since the COS is explicitly specified in the Probe parameters." ::= { esaProbeHistoryEntry 2 } esaProbeHistoryIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this ESA Probe statistics history entry." ::= { esaProbeHistoryEntry 3 } esaProbeHistoryTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time of history bin creation." ::= { esaProbeHistoryEntry 4 } esaProbeHistoryValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { esaProbeHistoryEntry 5 } esaProbeHistoryAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { esaProbeHistoryEntry 6 } esaProbeHistoryCOS OBJECT-TYPE SYNTAX ClassOfServiceType MAX-ACCESS read-only STATUS current DESCRIPTION "The Class of Service. For Release 4.1 GE206, this value is cos-not-applicable, since multi COS SLA is not supported." ::= { esaProbeHistoryEntry 7 } esaProbeHistoryP2RPkts OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Transmitted Packets in the current interval. In the case of Y.1731 probes, this reflects the number of DMRs (Delay Measurement Replies) received and this will always be the same as the esaProbeHistoryR2PPkts." ::= { esaProbeHistoryEntry 8 } esaProbeHistoryP2RErredPkts OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Packets in the current interval, for which there was a problem in transmission. This error is counted when there is a failure in packet transmission due to resource limitations (buffers). This can happen if the Probe Configuration was changed to send in a large number of packets in a time interval. NOTE: This is not applicable for Y.1731 probes." ::= { esaProbeHistoryEntry 9 } esaProbeHistoryP2RSyncErrs OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of (time) Synchronization Errors from probe to reflector in the current interval." ::= { esaProbeHistoryEntry 10 } esaProbeHistoryP2RLostPkts OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Lost Pkts from probe to reflector in the current interval. For Y.1731 probes, these are the actual data frames lost." ::= { esaProbeHistoryEntry 11 } esaProbeHistoryR2PPkts OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Received Packets in the current interval. In the case of Y.1731 probes, this reflects the number of DMRs (Delay Measurement Replies) received and this will always be the same as the esaProbeHistoryP2RPkts." ::= { esaProbeHistoryEntry 12 } esaProbeHistoryR2PErredPkts OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Received Packets in the current interval, which had errors such as length of received packet is less than the protocol header length, packet was received after it was marked as lost (i.e.beyond timeout). NOTE: This is not applicable for Y.1731 probes." ::= { esaProbeHistoryEntry 13 } esaProbeHistoryR2PSyncErrs OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of (time) Synchronization Errors from reflector to probe in the current interval." ::= { esaProbeHistoryEntry 14 } esaProbeHistoryR2PLostPkts OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Lost Pkts from reflector to probe in the current interval. For Y.1731 probes, these are the actual data frames lost." ::= { esaProbeHistoryEntry 15 } esaProbeHistoryLostPkts OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Lost Packets in the current interval. Packets which are not received from the reflector end beyond the configured timeout value are termed as lost. NOTE: This is not applicable for Y.1731 probes." ::= { esaProbeHistoryEntry 16 } esaProbeHistorySeqGaps OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of sequence gaps across all packets received in the current interval. If (Received Seq Number) is greater than or equal to (Last Received Seq Number + 2)) it is termed as a sequence gap. NOTE: This is not applicable for Y.1731 probes." ::= { esaProbeHistoryEntry 17 } esaProbeHistoryOutOfSeqErrs OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of out of sequence errors across all packets received in the current interval. If (Received Seq Number) is less than or equal to (Last Received Seq Number), it is termed as out of sequence error. NOTE: This is not applicable for Y.1731 probes." ::= { esaProbeHistoryEntry 18 } esaProbeHistoryMinRoundTripDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum round-trip delay(in microseconds) across all packets received in the current interval. The reflector's processing time is excluded from the value." ::= { esaProbeHistoryEntry 19 } esaProbeHistoryMaxRoundTripDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum round-trip delay(in microseconds) across all packets received in the current interval. The reflector's processing time is excluded from the value." ::= { esaProbeHistoryEntry 20 } esaProbeHistoryAvgRoundTripDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average round-trip delay(in microseconds) across all packets received in the current interval. The reflector's processing time is excluded from the value." ::= { esaProbeHistoryEntry 21 } esaProbeHistorySumRoundTripDelay OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total sum of round trip delay(in microseconds) in the current interval. The reflector's processing time is excluded from the value." ::= { esaProbeHistoryEntry 22 } esaProbeHistorySumOfSqRoundTripDelay OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of square of round trip delays in the current interval." ::= { esaProbeHistoryEntry 23 } esaProbeHistoryMinOnewayP2RDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum one-way source to destination delay(in microseconds) across all packets received in the current interval." ::= { esaProbeHistoryEntry 24 } esaProbeHistoryMaxOnewayP2RDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum one-way source to destination delay(in microseconds) across all packets received in the current interval." ::= { esaProbeHistoryEntry 25 } esaProbeHistoryAvgOnewayP2RDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average one-way source to destination delay(in microseconds) across all packets received in the current interval." ::= { esaProbeHistoryEntry 26 } esaProbeHistorySumOnewayP2RDelay OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total sum of one-way delay from source to destination in the current interval." ::= { esaProbeHistoryEntry 27 } esaProbeHistorySumOfSqOnewayP2RDelay OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of square of one-way delay from source to destination in the current interval." ::= { esaProbeHistoryEntry 28 } esaProbeHistoryMinOnewayR2PDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum one-way destination to source delay(in microseconds) across all packets received in the current interval." ::= { esaProbeHistoryEntry 29 } esaProbeHistoryMaxOnewayR2PDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum one-way destination to source delay(in microseconds) across all packets received in the current interval." ::= { esaProbeHistoryEntry 30 } esaProbeHistoryAvgOnewayR2PDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average one-way destination to source delay(in microseconds) across all packets received in the current interval." ::= { esaProbeHistoryEntry 31 } esaProbeHistorySumOnewayR2PDelay OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total sum of one-way delay from destination to source in the current interval." ::= { esaProbeHistoryEntry 32 } esaProbeHistorySumOfSqOnewayR2PDelay OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of square of one-way delay from destination to source in the current interval." ::= { esaProbeHistoryEntry 33 } esaProbeHistoryMinPosP2RJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum positive one-way jitter from source to destination in the current interval." ::= { esaProbeHistoryEntry 34 } esaProbeHistoryMaxPosP2RJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum positive one-way jitter from source to destination in the current interval." ::= { esaProbeHistoryEntry 35 } esaProbeHistoryNumPosP2RJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of positive one-way jitters from source to destination in the current interval." ::= { esaProbeHistoryEntry 36 } esaProbeHistorySumPosP2RJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total sum of positive one-way jitters from source to destination in the current interval." ::= { esaProbeHistoryEntry 37 } esaProbeHistorySumOfSqPosP2RJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of square of positive one-way jitters from source to destination in the current interval." ::= { esaProbeHistoryEntry 38 } esaProbeHistoryMinNegP2RJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum negative one-way jitter from source to destination in the current interval." ::= { esaProbeHistoryEntry 39 } esaProbeHistoryMaxNegP2RJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum negative one-way jitter from source to destination in the current interval." ::= { esaProbeHistoryEntry 40 } esaProbeHistoryNumNegP2RJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of negative one-way jitters from source to destination in the current interval." ::= { esaProbeHistoryEntry 41 } esaProbeHistorySumNegP2RJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total sum of negative one-way jitters from source to destination in the current interval." ::= { esaProbeHistoryEntry 42 } esaProbeHistorySumOfSqNegP2RJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of square of negative one-way jitters from source to destination in the current interval." ::= { esaProbeHistoryEntry 43 } esaProbeHistoryMinPosR2PJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum positive one-way jitter from destination to source in the current interval." ::= { esaProbeHistoryEntry 44 } esaProbeHistoryMaxPosR2PJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum positive one-way jitter from destination to source in the current interval." ::= { esaProbeHistoryEntry 45 } esaProbeHistoryNumPosR2PJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of positive one-way jitters from destination to source in the current interval." ::= { esaProbeHistoryEntry 46 } esaProbeHistorySumPosR2PJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total sum of positive one-way jitters from destination to source in the current interval." ::= { esaProbeHistoryEntry 47 } esaProbeHistorySumOfSqPosR2PJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of square of positive one-way jitters from destination to source in the current interval." ::= { esaProbeHistoryEntry 48 } esaProbeHistoryMinNegR2PJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum negative one-way jitter from destination to source in the current interval." ::= { esaProbeHistoryEntry 49 } esaProbeHistoryMaxNegR2PJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum negative one-way jitter from destination to source in the current interval." ::= { esaProbeHistoryEntry 50 } esaProbeHistoryNumNegR2PJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of negative one-way jitters from destination to source in the current interval." ::= { esaProbeHistoryEntry 51 } esaProbeHistorySumNegR2PJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total sum of negative one-way jitters from destination to source in the current interval." ::= { esaProbeHistoryEntry 52 } esaProbeHistorySumOfSqNegR2PJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of square of negative one-way jitters from destination to source in the current interval." ::= { esaProbeHistoryEntry 53 } esaProbeHistoryY1731P2RNegLossOccurrences OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Y.1731 probes. This is the number of occurences of negative frame loss from Source MEP (Probe) to Destination MEP (Reflector). If these counts are non-zero then there could be some kind of provisioning mismatch between the Probe MEP and Reflector MEP. Here are some scenarios this can happen: - Probe MEP is configured to count in-profile frames only and the Reflector MEP is configured to count all frames with a mismatch in value for the attribute cfmMepLmCountInProfileFrames. - Probe MEP is configured to count data frames for specific VLAN priority and the Reflector MEP is configured to count data frames for all the priorities with a mismatch in values for the attributes cfmMepLmTxCountAllPrios or cfmMepLmRxCountAllPrios. NOTE: This could possibly happen due to reasons not related to configuration such as frame reordering in the network." ::= { esaProbeHistoryEntry 54 } esaProbeHistoryY1731R2PNegLossOccurrences OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Y.1731 probes. This is the number of occurences of negative frame loss from to Destination MEP (Reflector) to Source MEP (Probe). If these counts are non-zero then there could be some kind of provisioning mismatch between the Probe MEP and Reflector MEP. Here are some scenarios this can happen: - Probe MEP is configured to count in-profile frames only and the Reflector MEP is configured to count all frames with a mismatch in value for the attribute cfmMepLmCountInProfileFrames. - Probe MEP is configured to count data frames for specific VLAN priority and the Reflector MEP is configured to count data frames for all the priorities with a mismatch in values for the attributes cfmMepLmTxCountAllPrios or cfmMepLmRxCountAllPrios. NOTE: This could possibly happen due to reasons not related to configuration such as frame reordering in the network." ::= { esaProbeHistoryEntry 55 } esaProbeHistoryY1731RxLmSamples OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Y.1731 probes. This flag indicates that at least one loss measurement sample was received for this bin period (LMRs received). This is used by the user to differentiate between valid zero frame loss and not receiving any LMRs." ::= { esaProbeHistoryEntry 56 } esaProbeHistoryY1731RxDmSamples OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Y.1731 probes. This flag indicates that at least one delay measurement sample was received for this bin period (DMRs received)." ::= { esaProbeHistoryEntry 57 } esaProbeHistoryY1731P2RFrames OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Y.1731 probes. This is the number of data frames counted by the Source MEP (Probe) that are transmitted towards the Destination MEP (Reflector). Based on the configuration the MEP counts the data frames with: - MEP's LM TX priority or all the priorities - All the VLAN IDs belonging the MEP's MA VID list." ::= { esaProbeHistoryEntry 58 } esaProbeHistoryY1731R2PFrames OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Y.1731 probes. This is the number of data frames counted by the Destination MEP (Reflector) that are transmitted towards the Source MEP (Probe). Based on the configuration the MEP counts the data frames with: - MEP's LM RX priority or all the priorities - All the VLAN IDs belonging the MEP's MA VID list." ::= { esaProbeHistoryEntry 59 } esaProbeHistoryAvgAbsP2RJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the average absolute P2R Jitter value. ." ::= { esaProbeHistoryEntry 60 } esaProbeHistoryAvgAbsR2PJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the average absolute R2P Jitter value. ." ::= { esaProbeHistoryEntry 61 } esaProbeHistoryMinAbsP2RJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the minimum absolute P2R Jitter value. ." ::= { esaProbeHistoryEntry 62 } esaProbeHistoryMinAbsR2PJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the minimum absolute R2P Jitter value. ." ::= { esaProbeHistoryEntry 63 } esaProbeHistoryMaxAbsP2RJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the maximum absolute P2R Jitter value. ." ::= { esaProbeHistoryEntry 64 } esaProbeHistoryMaxAbsR2PJitter OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the maximum absolute R2P Jitter value. ." ::= { esaProbeHistoryEntry 65 } esaProbeHistoryNumAbsP2RJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the number of absolute P2R Jitters." ::= { esaProbeHistoryEntry 66 } esaProbeHistoryNumAbsR2PJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the number of absolute R2P Jitters." ::= { esaProbeHistoryEntry 67 } esaProbeHistorySumAbsP2RJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the sum of absolute P2R Jitter values." ::= { esaProbeHistoryEntry 68 } esaProbeHistorySumAbsR2PJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the sum of absolute R2P Jitter values." ::= { esaProbeHistoryEntry 69 } esaProbeHistorySumOfSqAbsP2RJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the sum of squares of absolute P2R Jitter values." ::= { esaProbeHistoryEntry 70 } esaProbeHistorySumOfSqAbsR2PJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the sum of squares of absolute R2P Jitter values." ::= { esaProbeHistoryEntry 71 } -- -- ESA Probe Statistics Distribution Config Table -- esaProbeDistStatsConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF EsaProbeDistStatsConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries that need to be configured in order to obtain statistical distribution of ESA Probe collected data." ::= { cmServAssuranceObjects 9 } esaProbeDistStatsConfigEntry OBJECT-TYPE SYNTAX EsaProbeDistStatsConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the esaProbeDistStatsConfigTable." INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex, esaProbeDistStatsConfigIndex } ::= { esaProbeDistStatsConfigTable 1 } EsaProbeDistStatsConfigEntry ::= SEQUENCE { esaProbeDistStatsConfigIndex Integer32, esaProbeDistStatsConfigType EsaProbeDistStatsType, esaProbeDistStatsConfigMinVal Integer32, esaProbeDistStatsConfigMaxVal Integer32, esaProbeDistStatsConfigNumBins Unsigned32, esaProbeDistStatsConfigLowBoundOfBin1 Integer32, esaProbeDistStatsConfigLowBoundOfBin2 Integer32, esaProbeDistStatsConfigLowBoundOfBin3 Integer32, esaProbeDistStatsConfigLowBoundOfBin4 Integer32, esaProbeDistStatsConfigLowBoundOfBin5 Integer32, esaProbeDistStatsConfigLowBoundOfBin6 Integer32, esaProbeDistStatsConfigLowBoundOfBin7 Integer32, esaProbeDistStatsConfigLowBoundOfBin8 Integer32, esaProbeDistStatsConfigLowBoundOfBin9 Integer32 } esaProbeDistStatsConfigIndex OBJECT-TYPE SYNTAX Integer32 (1..11) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique index for each row. Each row corresponds to each enumeration type specified in EsaProbeDistStatsType." ::= { esaProbeDistStatsConfigEntry 1 } esaProbeDistStatsConfigType OBJECT-TYPE SYNTAX EsaProbeDistStatsType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the statistical distribution is for round-trip delay (rt-delay), one-way probe to reflector delay (oneway-p2rdelay), one-way reflector to probe delay(oneway-r2pdelay), probe to reflector jitter (oneway-p2rjitter) or one-way reflector to probe jitter (oneway-r2pjitter)." ::= { esaProbeDistStatsConfigEntry 2 } esaProbeDistStatsConfigMinVal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum sample value in distribution." ::= { esaProbeDistStatsConfigEntry 3 } esaProbeDistStatsConfigMaxVal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum sample value in distribution." ::= { esaProbeDistStatsConfigEntry 4 } esaProbeDistStatsConfigNumBins OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of distribution bins." ::= { esaProbeDistStatsConfigEntry 5 } esaProbeDistStatsConfigLowBoundOfBin1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of the 1st bin." ::= { esaProbeDistStatsConfigEntry 6 } esaProbeDistStatsConfigLowBoundOfBin2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of the 2nd bin." ::= { esaProbeDistStatsConfigEntry 7 } esaProbeDistStatsConfigLowBoundOfBin3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of the 3rd bin." ::= { esaProbeDistStatsConfigEntry 8 } esaProbeDistStatsConfigLowBoundOfBin4 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of the 4th bin." ::= { esaProbeDistStatsConfigEntry 9 } esaProbeDistStatsConfigLowBoundOfBin5 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of the 5th bin." ::= { esaProbeDistStatsConfigEntry 10 } esaProbeDistStatsConfigLowBoundOfBin6 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of the 6th bin." ::= { esaProbeDistStatsConfigEntry 11 } esaProbeDistStatsConfigLowBoundOfBin7 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of the 7th bin." ::= { esaProbeDistStatsConfigEntry 12 } esaProbeDistStatsConfigLowBoundOfBin8 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of the 8th bin." ::= { esaProbeDistStatsConfigEntry 13 } esaProbeDistStatsConfigLowBoundOfBin9 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bound of the 9th bin." ::= { esaProbeDistStatsConfigEntry 14 } -- -- ESA Probe Statistics Current Distribution Results Table -- esaProbeDistStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF EsaProbeDistStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries that provide statistical distribution of ESA Probe collected data." ::= { cmServAssuranceObjects 10 } esaProbeDistStatsEntry OBJECT-TYPE SYNTAX EsaProbeDistStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the esaProbeDistStatsTable." INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex, esaProbeDistStatsConfigIndex, esaProbeDistStatsDestinationIndex, esaProbeDistStatsCOSIndex } ::= { esaProbeDistStatsTable 1 } EsaProbeDistStatsEntry ::= SEQUENCE { esaProbeDistStatsDestinationIndex Integer32, esaProbeDistStatsCOSIndex Integer32, esaProbeDistStatsAction CmPmBinAction, esaProbeDistStatsCOS ClassOfServiceType, esaProbeDistStatsNumBins Integer32, esaProbeDistStatsLTMin PerfCounter64, esaProbeDistStatsGTMax PerfCounter64 } esaProbeDistStatsDestinationIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify a destination (Reflector) Index, in a point-to-multi point SLA. For Release 4.1 GE206, this value is 1, since only point-to-point SLA is supported." ::= { esaProbeDistStatsEntry 1 } esaProbeDistStatsCOSIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify SLA for a specific Class of Service. For Release 4.1 GE206, this value is 1, since the COS is explicitly specified in the Probe parameters." ::= { esaProbeDistStatsEntry 2 } esaProbeDistStatsAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { esaProbeDistStatsEntry 3 } esaProbeDistStatsCOS OBJECT-TYPE SYNTAX ClassOfServiceType MAX-ACCESS read-only STATUS current DESCRIPTION "The Class of Service. For Release 4.1 GE206, this value is cos-not-applicable, since multi COS SLA is not supported." ::= { esaProbeDistStatsEntry 4 } esaProbeDistStatsNumBins OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bins over which the statistical data is distributed." ::= { esaProbeDistStatsEntry 5 } esaProbeDistStatsLTMin OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sample data points which are less than the minimum value specified." ::= { esaProbeDistStatsEntry 6 } esaProbeDistStatsGTMax OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sample data points which are greater than the maximum value specified." ::= { esaProbeDistStatsEntry 7 } -- -- ESA Probe Statistics Current Distribution Results BIN Table -- esaProbeDistStatsBinTable OBJECT-TYPE SYNTAX SEQUENCE OF EsaProbeDistStatsBinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries that provide statistical distribution of ESA Probe collected data for specific BINs." ::= { cmServAssuranceObjects 11 } esaProbeDistStatsBinEntry OBJECT-TYPE SYNTAX EsaProbeDistStatsBinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the esaProbeDistStatsBinTable." INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex, esaProbeDistStatsConfigIndex, esaProbeDistStatsDestinationIndex, esaProbeDistStatsCOSIndex, esaProbeDistStatsBinIndex } ::= { esaProbeDistStatsBinTable 1 } EsaProbeDistStatsBinEntry ::= SEQUENCE { esaProbeDistStatsBinIndex Integer32, esaProbeDistStatsBinLower Integer32, esaProbeDistStatsBinUpper Integer32, esaProbeDistStatsBinNumSamples PerfCounter64 } esaProbeDistStatsBinIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An index for each row that uniquely provides statistical data for a range." ::= { esaProbeDistStatsBinEntry 1 } esaProbeDistStatsBinLower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The lower limit of values collected in this bin." ::= { esaProbeDistStatsBinEntry 2 } esaProbeDistStatsBinUpper OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The upper limit of values collected in this bin." ::= { esaProbeDistStatsBinEntry 3 } esaProbeDistStatsBinNumSamples OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sample data points which fall between the lower and upper limits." ::= { esaProbeDistStatsBinEntry 4 } -- -- ESA Probe Statistics History Distribution Results Table -- esaProbeDistHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF EsaProbeDistHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries that provide statistical distribution history of ESA Probe collected data." ::= { cmServAssuranceObjects 12 } esaProbeDistHistoryEntry OBJECT-TYPE SYNTAX EsaProbeDistHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the esaProbeDistHistoryTable." INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex, esaProbeDistStatsConfigIndex, esaProbeDistHistoryDestinationIndex, esaProbeDistHistoryCOSIndex, esaProbeDistHistoryIndex } ::= { esaProbeDistHistoryTable 1 } EsaProbeDistHistoryEntry ::= SEQUENCE { esaProbeDistHistoryDestinationIndex Integer32, esaProbeDistHistoryCOSIndex Integer32, esaProbeDistHistoryIndex Integer32, esaProbeDistHistoryTime DateAndTime, esaProbeDistHistoryAction CmPmBinAction, esaProbeDistHistoryCOS ClassOfServiceType, esaProbeDistHistoryNumBins Integer32, esaProbeDistHistoryLTMin PerfCounter64, esaProbeDistHistoryGTMax PerfCounter64 } esaProbeDistHistoryDestinationIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify a destination (Reflector) Index, in a point-to-multi point SLA. For Release 4.1 GE206, this value is 1, since only point-to-point SLA is supported." ::= { esaProbeDistHistoryEntry 1 } esaProbeDistHistoryCOSIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify SLA for a specific Class of Service. For Release 4.1 GE206, this value is 1, since the COS is explicitly specified in the Probe parameters." ::= { esaProbeDistHistoryEntry 2 } esaProbeDistHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this ESA Probe Distribution History entry." ::= { esaProbeDistHistoryEntry 3 } esaProbeDistHistoryTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time of history bin creation." ::= { esaProbeDistHistoryEntry 4 } esaProbeDistHistoryAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { esaProbeDistHistoryEntry 5 } esaProbeDistHistoryCOS OBJECT-TYPE SYNTAX ClassOfServiceType MAX-ACCESS read-only STATUS current DESCRIPTION "The Class of Service. For Release 4.1 GE206, this value is cos-not-applicable, since multi COS SLA is not supported." ::= { esaProbeDistHistoryEntry 6 } esaProbeDistHistoryNumBins OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bins over which the statistical data is distributed." ::= { esaProbeDistHistoryEntry 7 } esaProbeDistHistoryLTMin OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sample data points which are less than the minimum value specified." ::= { esaProbeDistHistoryEntry 8 } esaProbeDistHistoryGTMax OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sample data points which are greater than the maximum value specified." ::= { esaProbeDistHistoryEntry 9 } -- -- ESA Probe Statistics History Distribution Results BIN Table -- esaProbeDistHistoryBinTable OBJECT-TYPE SYNTAX SEQUENCE OF EsaProbeDistHistoryBinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries that provide historical statistical distribution of ESA Probe collected data for specific BINs." ::= { cmServAssuranceObjects 13 } esaProbeDistHistoryBinEntry OBJECT-TYPE SYNTAX EsaProbeDistHistoryBinEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the esaProbeDistHistoryBinTable." INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex, esaProbeDistStatsConfigIndex, esaProbeDistHistoryDestinationIndex, esaProbeDistHistoryCOSIndex, esaProbeDistHistoryIndex, esaProbeDistHistoryBinIndex } ::= { esaProbeDistHistoryBinTable 1 } EsaProbeDistHistoryBinEntry ::= SEQUENCE { esaProbeDistHistoryBinIndex Integer32, esaProbeDistHistoryBinLower Integer32, esaProbeDistHistoryBinUpper Integer32, esaProbeDistHistoryBinNumSamples PerfCounter64 } esaProbeDistHistoryBinIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An index for each row that uniquely provides statistical data for a range." ::= { esaProbeDistHistoryBinEntry 1 } esaProbeDistHistoryBinLower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The lower limit of values collected in this bin." ::= { esaProbeDistHistoryBinEntry 2 } esaProbeDistHistoryBinUpper OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The upper limit of values collected in this bin." ::= { esaProbeDistHistoryBinEntry 3 } esaProbeDistHistoryBinNumSamples OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sample data points which fall between the lower and upper limits." ::= { esaProbeDistHistoryBinEntry 4 } ---ESA Probe Threshold Table esaProbeStatsThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF EsaProbeStatsThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of entries that allow manageability of ESA Probe Thresholds." ::= { cmServAssuranceObjects 14 } esaProbeStatsThresholdEntry OBJECT-TYPE SYNTAX EsaProbeStatsThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the esaProbeStatsThresholdTable." INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex, esaProbeStatsThresholdIndex } ::= { esaProbeStatsThresholdTable 1 } EsaProbeStatsThresholdEntry ::= SEQUENCE { esaProbeStatsThresholdIndex Integer32, esaProbeStatsThresholdVariable VariablePointer, esaProbeStatsThresholdAbsValueLo Unsigned32, esaProbeStatsThresholdAbsValueHi Unsigned32, esaProbeStatsThresholdMonValue PerfCounter64 } esaProbeStatsThresholdIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies an entry in the esaProbeStatsThresholdTable." ::= { esaProbeStatsThresholdEntry 1 } esaProbeStatsThresholdVariable OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "The object identifier of the particular variable to be sampled. Objects of the esaProbeStatsTable table are monitored. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32, Counter32, PerfCounter64, Gauge, or TimeTicks) may be sampled." ::= { esaProbeStatsThresholdEntry 2 } esaProbeStatsThresholdAbsValueLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Lower 32 bits of the absolute value of the threshold." ::= { esaProbeStatsThresholdEntry 3 } esaProbeStatsThresholdAbsValueHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Higher 32 bits of the absolute value of the threshold." ::= { esaProbeStatsThresholdEntry 4 } esaProbeStatsThresholdMonValue OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Monitored value corresponding to esaProbeStatsThresholdVariable." ::= { esaProbeStatsThresholdEntry 5 } -- -- ESA Probe COS Configuration Table -- esaProbeCOSConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF EsaProbeCOSConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to ESA Probes COS Configuration Levels." ::= { cmServAssuranceObjects 15 } esaProbeCOSConfigEntry OBJECT-TYPE SYNTAX EsaProbeCOSConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the esaProbeCOSConfigTable. Entries can be created in this table by management application action." INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex, esaProbeCOSConfigIndex } ::= { esaProbeCOSConfigTable 1 } EsaProbeCOSConfigEntry ::= SEQUENCE { -- identification esaProbeCOSConfigIndex Integer32, esaProbeCOSConfigType ClassOfServiceType, esaProbeCOSConfigInterval EsaProbePktIntervalType, esaProbeCOSConfigPktSize Integer32, esaProbeCOSConfigStorageType StorageType, esaProbeCOSConfigRowStatus RowStatus, esaProbeCOSConfigslmInterval EsaProbePktIntervalType, esaProbeCOSConfigslmPktSize Integer32, esaProbeCOSConfigSoamPmExtAvailFlrThreshold Unsigned32, esaProbeCOSConfigSoamPmExtFlrDeltaTNumLmPdus Unsigned32, esaProbeCOSConfigSoamPmExtConDeltaTsForAvail Unsigned32 } esaProbeCOSConfigIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "An integer index value used to uniquely identify SLA (Service Level Agreement) for a specific Class of Service. Index 1 is associated with cos-0, index 2 with cos-1, index 3 with cos-2 and so on." ::= { esaProbeCOSConfigEntry 1 } esaProbeCOSConfigType OBJECT-TYPE SYNTAX ClassOfServiceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is the Class of Service Type for Y.1731/SLM-SLR Probes, associated with the row." ::= { esaProbeCOSConfigEntry 2 } esaProbeCOSConfigInterval OBJECT-TYPE SYNTAX EsaProbePktIntervalType MAX-ACCESS read-create STATUS current DESCRIPTION "This is the Class of Service Y.1731/SLM-SLR packet interval type." ::= { esaProbeCOSConfigEntry 3 } esaProbeCOSConfigPktSize OBJECT-TYPE SYNTAX Integer32 (64..9612) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the Class of Service Y.1731/SLM-SLR Packet Size. This object enables specification of the TLV size for Delay Measurement Measures(DMMs) as well as Synthetic Loss Measurement Frames (SLMs)." ::= { esaProbeCOSConfigEntry 4 } esaProbeCOSConfigStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { esaProbeCOSConfigEntry 5 } esaProbeCOSConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of esaProbeCOSConfigRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with esaProbeCOSConfigRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The esaProbeCOSConfigRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { esaProbeCOSConfigEntry 6 } esaProbeCOSConfigslmInterval OBJECT-TYPE SYNTAX EsaProbePktIntervalType MAX-ACCESS read-create STATUS current DESCRIPTION "This allows specification of the interval between subsequent SLM packets." ::= { esaProbeCOSConfigEntry 7 } esaProbeCOSConfigslmPktSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This allows specification of the SLM Packet Size." ::= { esaProbeCOSConfigEntry 8 } esaProbeCOSConfigSoamPmExtAvailFlrThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-write STATUS current DESCRIPTION "Frame loss ratio threshold for Availability (m%)." ::= { esaProbeCOSConfigEntry 9 } esaProbeCOSConfigSoamPmExtFlrDeltaTNumLmPdus OBJECT-TYPE SYNTAX Unsigned32 (1..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the number of loss measurement PDUs. delta_t is this attribute multiplied by the loss measurement message period. For example, if SLM message period is 100ms and this attribute is 10, then the delta_t is 1second." ::= { esaProbeCOSConfigEntry 10 } esaProbeCOSConfigSoamPmExtConDeltaTsForAvail OBJECT-TYPE SYNTAX Unsigned32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the number of consecutive delta_ts used in the computation of availability/unavailability (n)." ::= { esaProbeCOSConfigEntry 11 } -- -- ESA Probe Destination Configuration Table -- esaProbeMultiDestinationTable OBJECT-TYPE SYNTAX SEQUENCE OF EsaProbeMultiDestinationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to ESA Probes Multi Destinations." ::= { cmServAssuranceObjects 16 } esaProbeMultiDestinationEntry OBJECT-TYPE SYNTAX EsaProbeMultiDestinationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the esaProbeMultiDestinationTable. Entries can be created in this table by management application action. Entries in this table represent destinations in a point-to-multipoint ESA Probe." INDEX { neIndex, shelfIndex, slotIndex, esaProbeIndex, esaProbeDestinationIndex } ::= { esaProbeMultiDestinationTable 1 } EsaProbeMultiDestinationEntry ::= SEQUENCE { -- identification esaProbeDestinationIndex Integer32, esaProbeDestinationMepType MepDestinationType, esaProbeDestinationMepMacAddr MacAddress, esaProbeDestinationMepId Dot1agCfmMepIdOrZero, esaProbeDestinationStorageType StorageType, esaProbeDestinationRowStatus RowStatus } esaProbeDestinationIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "An integer index value used to uniquely identify a destination." ::= { esaProbeMultiDestinationEntry 1 } esaProbeDestinationMepType OBJECT-TYPE SYNTAX MepDestinationType MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is applicable only for point-to-multipoint probes. This indicates if the destination MEP is specified using the MEP ID object esaProbeDestinationMepId." ::= { esaProbeMultiDestinationEntry 2 } esaProbeDestinationMepMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is applicable only for point-to-multipoint probes. It identifies the destination MEP. This MAC address will be the destination MAC address for frames if esaProbeDestinationMepType is 'macaddress'. If CC protocol is not enabled between source and destination MEP then this is the only choice to identify the remote MEP." ::= { esaProbeMultiDestinationEntry 3 } esaProbeDestinationMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute is applicable only for point-to-multipoint probes. It identifies the destination MEP. The MAC address of this RMEP ID from RMEP database will be the destination MAC address. This value is used only if the esaProbeDestinationMepType is 'mepid'. CC protocol must be enabled between source and destination MEP if the RMEP ID is used to identify the Remote MEP." ::= { esaProbeMultiDestinationEntry 4 } esaProbeDestinationStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { esaProbeMultiDestinationEntry 5 } esaProbeDestinationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of esaProbeDestinationRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with esaProbeDestinationRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The esaProbeDestinationRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { esaProbeMultiDestinationEntry 6 } -- -- BERT Control Table -- bertControlTable OBJECT-TYPE SYNTAX SEQUENCE OF BertControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the control of BERT Streams." ::= { cmServAssuranceObjects 17 } bertControlEntry OBJECT-TYPE SYNTAX BertControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the bertControlTable." INDEX { neIndex, shelfIndex, slotIndex, ecpaControlIndex } ::= { bertControlTable 1 } BertControlEntry ::= SEQUENCE { bertControlIndex Integer32, bertControlSourceEntity VariablePointer, bertControlTestMode BerTestMode, bertControlDuration Integer32, bertControlStream Integer32, bertControlAction BertControlAction, bertControlTestStatus BerTestStatus } bertControlIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this BERT Control." ::= { bertControlEntry 1 } bertControlSourceEntity OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "Pointer to the entity on which the BERT will be started within a card." ::= { bertControlEntry 2 } bertControlTestMode OBJECT-TYPE SYNTAX BerTestMode MAX-ACCESS read-write STATUS current DESCRIPTION "The mode of BERT to be performed." ::= { bertControlEntry 3 } bertControlDuration OBJECT-TYPE SYNTAX Integer32 (0..259200) MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables specification of the time in seconds for BERT. BERT will be stopped after the specified time interval is exhausted." ::= { bertControlEntry 4 } bertControlStream OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies which stream should be included in the BERT execution. Value of 0 indicates that no streams is selected by bertControlStream. Non 0 value indicates the selected BERT stream." ::= { bertControlEntry 5 } bertControlAction OBJECT-TYPE SYNTAX BertControlAction MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables starting/stopping of traffic generation as well as resetting of monitored streams. This object may not be specified at configuration creation time - in this case it will take the value of `none'. This allows manager to explicitly control the start and stop of traffic generation/monitoring activity. Value of `stop' is invalid if the activity is specified but not started. Value of `start' is valid during creation time, as well as when activity is already stopped. Specification of `reset' resets the specified streams to default values, as well as clears the control specification. Get on this variable gives the most recent SNMP set specification." ::= { bertControlEntry 6 } bertControlTestStatus OBJECT-TYPE SYNTAX BerTestStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the current status of test set configuration entry. Upon creation, the status has a value of `initial'; the status changes to `in-progress' upon ecpaControlAction indicating `start'; the status changes to `completed' upon ecpaControlAction indicating stop, as well as when the specified test generation completes autonomously upon completion of number of frames or completion of specified time interval." ::= { bertControlEntry 7 } -- -- BERT Config Stream Table -- bertConfigStreamTable OBJECT-TYPE SYNTAX SEQUENCE OF BertConfigStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the configuration of BERT Config Stream Specifications." ::= { cmServAssuranceObjects 18 } bertConfigStreamEntry OBJECT-TYPE SYNTAX BertConfigStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the bertConfigStreamTable." INDEX { bertConfigStreamIndex } ::= { bertConfigStreamTable 1 } BertConfigStreamEntry ::= SEQUENCE { bertConfigStreamIndex Integer32, bertConfigStreamName DisplayString, bertConfigStreamTxPattern BertPattern, bertConfigStreamErrInjectEnabled TruthValue, bertConfigStreamErrInjectRate BitErrRate, bertConfigStreamErrInjectRateMultiplier Integer32, bertConfigStreamUserPatternLength BertUserPatternLength, bertConfigStreamUserPattern DisplayString } bertConfigStreamIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this BERT configStream." ::= { bertConfigStreamEntry 1 } bertConfigStreamName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Symbolic Stream Name that can be associated with an BERT Config stream." ::= { bertConfigStreamEntry 2 } bertConfigStreamTxPattern OBJECT-TYPE SYNTAX BertPattern MAX-ACCESS read-write STATUS current DESCRIPTION "Allows specification of the Tx pattern of this BERT Config stream." ::= { bertConfigStreamEntry 3 } bertConfigStreamErrInjectEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of whether Bit Error be injected." ::= { bertConfigStreamEntry 4 } bertConfigStreamErrInjectRate OBJECT-TYPE SYNTAX BitErrRate MAX-ACCESS read-write STATUS current DESCRIPTION "Bit Error Rate, applicable when Error Injection is enabled." ::= { bertConfigStreamEntry 5 } bertConfigStreamErrInjectRateMultiplier OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "BER value with 0.1 Step, in this release is fixed 10, only applicable when Error Injection is enabled." ::= { bertConfigStreamEntry 6 } bertConfigStreamUserPatternLength OBJECT-TYPE SYNTAX BertUserPatternLength MAX-ACCESS read-write STATUS current DESCRIPTION "User defined testing pattern length." ::= { bertConfigStreamEntry 7 } bertConfigStreamUserPattern OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User defined testing pattern in a HEX format display string, applicable when test pattern is user defined." ::= { bertConfigStreamEntry 8 } --- BERT Test Streams Table bertTestStreamTable OBJECT-TYPE SYNTAX SEQUENCE OF BertTestStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries containing results of a previous test." ::= { cmServAssuranceObjects 19 } bertTestStreamEntry OBJECT-TYPE SYNTAX BertTestStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the bertTestStreamTable. Entries in this table show results of the current BERT." INDEX { neIndex, shelfIndex, slotIndex, bertControlIndex, bertTestStreamIndex } ::= { bertTestStreamTable 1 } BertTestStreamEntry ::= SEQUENCE { bertTestStreamIndex Integer32, bertTestStreamName DisplayString, bertTestStreamTxPattern BertPattern, bertTestStreamErrInjectEnabled TruthValue, bertTestStreamErrInjectRate BitErrRate, bertTestStreamErrInjectRateMultiplier Integer32, bertTestStreamUserPatternLength BertUserPatternLength, bertTestStreamUserPattern DisplayString, bertTestStreamMonStartTime DateAndTime, bertTestStreamMonEndTime DateAndTime, bertTestStreamMonElapsedTime Integer32, bertTestStreamMonSyncState BertSyncState, bertTestStreamMonRxPattern BertPattern, bertTestStreamMonSyncCounts Unsigned32, bertTestStreamMonRxBitErrsSinceStart PerfCounter64, bertTestStreamMonRxBitsSinceStart PerfCounter64, bertTestStreamMonRxESsSinceStart Unsigned32, bertTestStreamMonRxErrRateSinceStart BitErrRate, bertTestStreamMonRxErrRateMultiplierSinceStart Integer32, bertTestStreamMonRxBitErrsSinceLastSync PerfCounter64, bertTestStreamMonRxBitsSinceLastSync PerfCounter64, bertTestStreamMonRxESsSinceLastSync Unsigned32, bertTestStreamMonRxErrRateSinceLastSync BitErrRate, bertTestStreamMonRxErrRateMultiplierSinceLastSync Unsigned32, bertTestStreamConfigChangedFlag TruthValue, bertTestStreamMonOOSSsSinceStart Unsigned32 } bertTestStreamIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value corresponding to the stream index for which the BERT was initiated." ::= { bertTestStreamEntry 1 } bertTestStreamName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Symbolic Stream Name that can be associated with an BERT stream." ::= { bertTestStreamEntry 2 } bertTestStreamTxPattern OBJECT-TYPE SYNTAX BertPattern MAX-ACCESS read-only STATUS current DESCRIPTION "Allows specification of the Tx pattern of this BERT Test stream." ::= { bertTestStreamEntry 3 } bertTestStreamErrInjectEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows specification of whether Bit Error be injected." ::= { bertTestStreamEntry 4 } bertTestStreamErrInjectRate OBJECT-TYPE SYNTAX BitErrRate MAX-ACCESS read-only STATUS current DESCRIPTION "Bit Error Rate, applicable when Error Injection is enabled." ::= { bertTestStreamEntry 5 } bertTestStreamErrInjectRateMultiplier OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "BER value with 0.1 Step, in this release is fixed 10, only applicable when Error Injection is enabled." ::= { bertTestStreamEntry 6 } bertTestStreamUserPatternLength OBJECT-TYPE SYNTAX BertUserPatternLength MAX-ACCESS read-only STATUS current DESCRIPTION "User defined testing pattern length." ::= { bertTestStreamEntry 7 } bertTestStreamUserPattern OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "User defined testing pattern in a HEX format display string, applicable when test pattern is user defined." ::= { bertTestStreamEntry 8 } bertTestStreamMonStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The start time of the BERT for this stream." ::= { bertTestStreamEntry 9 } bertTestStreamMonEndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The end time of the BERT for this stream." ::= { bertTestStreamEntry 10 } bertTestStreamMonElapsedTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The elapsed time of BERT for this stream in seconds." ::= { bertTestStreamEntry 11 } bertTestStreamMonSyncState OBJECT-TYPE SYNTAX BertSyncState MAX-ACCESS read-only STATUS current DESCRIPTION "The Sync State of the BERT." ::= { bertTestStreamEntry 12 } bertTestStreamMonRxPattern OBJECT-TYPE SYNTAX BertPattern MAX-ACCESS read-only STATUS current DESCRIPTION "Allows specification of the Rx pattern of this BERT Test stream." ::= { bertTestStreamEntry 13 } bertTestStreamMonSyncCounts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Allows specification of the Sync counts from test start." ::= { bertTestStreamEntry 14 } bertTestStreamMonRxBitErrsSinceStart OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Allows specification of the Received Errors since test start." ::= { bertTestStreamEntry 15 } bertTestStreamMonRxBitsSinceStart OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Allows specification of the Received Bits since test start." ::= { bertTestStreamEntry 16 } bertTestStreamMonRxESsSinceStart OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Allows specification of the Error seconds since test start." ::= { bertTestStreamEntry 17 } bertTestStreamMonRxErrRateSinceStart OBJECT-TYPE SYNTAX BitErrRate MAX-ACCESS read-only STATUS current DESCRIPTION "Allows specification of the Received BER Unit since test start." ::= { bertTestStreamEntry 18 } bertTestStreamMonRxErrRateMultiplierSinceStart OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Allows specification of the Received BER value with 0.1 Step since test start." ::= { bertTestStreamEntry 19 } bertTestStreamMonRxBitErrsSinceLastSync OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Allows specification of the Received Errors since last sync." ::= { bertTestStreamEntry 20 } bertTestStreamMonRxBitsSinceLastSync OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Allows specification of the Received Bits since last sync." ::= { bertTestStreamEntry 21 } bertTestStreamMonRxESsSinceLastSync OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Allows specification of the Received Error seconds since last sync." ::= { bertTestStreamEntry 22 } bertTestStreamMonRxErrRateSinceLastSync OBJECT-TYPE SYNTAX BitErrRate MAX-ACCESS read-only STATUS current DESCRIPTION "Allows specification of the Received BER Unit since last sync." ::= { bertTestStreamEntry 23 } bertTestStreamMonRxErrRateMultiplierSinceLastSync OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Allows specification of the Received BER value with 0.1 Step since last sync." ::= { bertTestStreamEntry 24 } bertTestStreamConfigChangedFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides information on whether the associated bertConfigStream is changed." ::= { bertTestStreamEntry 25 } bertTestStreamMonOOSSsSinceStart OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object means the Out of Sync Seconds since start." ::= { bertTestStreamEntry 26 } -- -- Esa Probe Cos Configuration Soam Pm Ext Table -- f3EsaProbeCOSConfigSoamPmExtTable OBJECT-TYPE SYNTAX SEQUENCE OF F3EsaProbeCOSConfigSoamPmExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to ESA Probe Cos Configurations MEF 35." ::= { cmServAssuranceObjects 20 } f3EsaProbeCOSConfigSoamPmExtEntry OBJECT-TYPE SYNTAX F3EsaProbeCOSConfigSoamPmExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the esaProbeCOSConfigTable MEF 35. Entries can be created in this table by management application action." AUGMENTS { esaProbeCOSConfigEntry } ::= { f3EsaProbeCOSConfigSoamPmExtTable 1 } F3EsaProbeCOSConfigSoamPmExtEntry ::= SEQUENCE { f3EsaProbeCOSConfigSoamPmExtAvailFlrThreshold Unsigned32, f3EsaProbeCOSConfigSoamPmExtFlrDeltaTNumLmPdus Unsigned32, f3EsaProbeCOSConfigSoamPmExtConDeltaTsForAvail Unsigned32 } f3EsaProbeCOSConfigSoamPmExtAvailFlrThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100000) MAX-ACCESS read-write STATUS current DESCRIPTION "Frame loss ratio threshold for Availability (m%)." ::= { f3EsaProbeCOSConfigSoamPmExtEntry 1 } f3EsaProbeCOSConfigSoamPmExtFlrDeltaTNumLmPdus OBJECT-TYPE SYNTAX Unsigned32 (1..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the number of loss measurement PDUs. delta_t is this attribute multiplied by the loss measurement message period. For example, if SLM message period is 100ms and this attribute is 10, then the delta_t is 1second." ::= { f3EsaProbeCOSConfigSoamPmExtEntry 2 } f3EsaProbeCOSConfigSoamPmExtConDeltaTsForAvail OBJECT-TYPE SYNTAX Unsigned32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the number of consecutive delta_ts used in the computation of availability/unavailability (n)." ::= { f3EsaProbeCOSConfigSoamPmExtEntry 3 } -- -- Esa Probe Stats Soam Pm Ext Table -- f3EsaProbeStatsSoamPmExtTable OBJECT-TYPE SYNTAX SEQUENCE OF F3EsaProbeStatsSoamPmExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of ESA Probe MEF 35 related statistics kept for a particular ESA Probe entity. These reflect the current data." ::= { cmServAssuranceObjects 21 } f3EsaProbeStatsSoamPmExtEntry OBJECT-TYPE SYNTAX F3EsaProbeStatsSoamPmExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3EsaProbeStatsSoamPmExtTable." AUGMENTS { esaProbeStatsEntry } ::= { f3EsaProbeStatsSoamPmExtTable 1 } F3EsaProbeStatsSoamPmExtEntry ::= SEQUENCE { f3EsaProbeStatsSoamPmExtMinP2RFlr PerfCounter64, f3EsaProbeStatsSoamPmExtMaxP2RFlr PerfCounter64, f3EsaProbeStatsSoamPmExtAvgP2RFlr PerfCounter64, f3EsaProbeStatsSoamPmExtMinR2PFlr PerfCounter64, f3EsaProbeStatsSoamPmExtMaxR2PFlr PerfCounter64, f3EsaProbeStatsSoamPmExtAvgR2PFlr PerfCounter64, f3EsaProbeStatsSoamPmExtP2rSeverelyErroredDeltaTs PerfCounter64, f3EsaProbeStatsSoamPmExtR2PSeverelyErroredDeltaTs PerfCounter64, f3EsaProbeStatsSoamPmExtP2rAvailableTime PerfCounter64, f3EsaProbeStatsSoamPmExtR2PAvailableTime PerfCounter64, f3EsaProbeStatsSoamPmExtP2rUnavailableTime PerfCounter64, f3EsaProbeStatsSoamPmExtR2PUnavailableTime PerfCounter64, f3EsaProbeStatsSoamPmExtMinAbsRTJitter PerfCounter64, f3EsaProbeStatsSoamPmExtMaxAbsRTJitter PerfCounter64, f3EsaProbeStatsSoamPmExtAvgAbsRTJitter PerfCounter64, f3EsaProbeStatsSoamPmExtNumAbsRTJitter PerfCounter64, f3EsaProbeStatsSoamPmExtSumAbsRTJitter PerfCounter64, f3EsaProbeStatsSoamPmExtSumOfSqAbsRTJitter PerfCounter64, f3EsaProbeStatsSoamPmExtMaxP2RFDR PerfCounter64, f3EsaProbeStatsSoamPmExtAvgP2RFDR PerfCounter64, f3EsaProbeStatsSoamPmExtNumP2RFDR PerfCounter64, f3EsaProbeStatsSoamPmExtSumP2RFDR PerfCounter64, f3EsaProbeStatsSoamPmExtSumOfSqP2RFDR PerfCounter64, f3EsaProbeStatsSoamPmExtMaxR2PFDR PerfCounter64, f3EsaProbeStatsSoamPmExtAvgR2PFDR PerfCounter64, f3EsaProbeStatsSoamPmExtNumR2PFDR PerfCounter64, f3EsaProbeStatsSoamPmExtSumR2PFDR PerfCounter64, f3EsaProbeStatsSoamPmExtSumOfSqR2PFDR PerfCounter64, f3EsaProbeStatsSoamPmExtMaxRTFDR PerfCounter64, f3EsaProbeStatsSoamPmExtAvgRTFDR PerfCounter64, f3EsaProbeStatsSoamPmExtNumRTFDR PerfCounter64, f3EsaProbeStatsSoamPmExtSumRTFDR PerfCounter64, f3EsaProbeStatsSoamPmExtSumOfSqRTFDR PerfCounter64, f3EsaProbeStatsSoamPmExtP2rAvailableDeltaTs PerfCounter64, f3EsaProbeStatsSoamPmExtR2pAvailableDeltaTs PerfCounter64, f3EsaProbeStatsSoamPmExtP2rUnavailableDeltaTs PerfCounter64, f3EsaProbeStatsSoamPmExtR2pUnavailableDeltaTs PerfCounter64, f3EsaProbeStatsSoamPmExtElapsedTime PerfCounter64 } f3EsaProbeStatsSoamPmExtMinP2RFlr OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the minimum probe to reflector FLR (m%)." ::= { f3EsaProbeStatsSoamPmExtEntry 1 } f3EsaProbeStatsSoamPmExtMaxP2RFlr OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the maximum probe to reflector FLR (m%)." ::= { f3EsaProbeStatsSoamPmExtEntry 2 } f3EsaProbeStatsSoamPmExtAvgP2RFlr OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the average probe to reflector FLR (m%)." ::= { f3EsaProbeStatsSoamPmExtEntry 3 } f3EsaProbeStatsSoamPmExtMinR2PFlr OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the minimum reflector to probe FLR (m%)." ::= { f3EsaProbeStatsSoamPmExtEntry 4 } f3EsaProbeStatsSoamPmExtMaxR2PFlr OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the maximum reflector to probe FLR (m%)." ::= { f3EsaProbeStatsSoamPmExtEntry 5 } f3EsaProbeStatsSoamPmExtAvgR2PFlr OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the average reflector to probe FLR (m%)." ::= { f3EsaProbeStatsSoamPmExtEntry 6 } f3EsaProbeStatsSoamPmExtP2rSeverelyErroredDeltaTs OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of delta_ts in which the FLR is greater than availability threshold in the probe to reflector direction." ::= { f3EsaProbeStatsSoamPmExtEntry 7 } f3EsaProbeStatsSoamPmExtR2PSeverelyErroredDeltaTs OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of delta_ts in which the FLR is greater than availability threshold in the reflector to probe direction." ::= { f3EsaProbeStatsSoamPmExtEntry 8 } f3EsaProbeStatsSoamPmExtP2rAvailableTime OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the probe to reflector available delta_ts which begins to increment when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts. It is incremented until FLR is greater than availability threshold for 'n' consecutive delta_ts." ::= { f3EsaProbeStatsSoamPmExtEntry 9 } f3EsaProbeStatsSoamPmExtR2PAvailableTime OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the reflector to probe available delta_ts which begins to increment when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts. It is incremented until FLR is greater than availability threshold for 'n' consecutive delta_ts." ::= { f3EsaProbeStatsSoamPmExtEntry 10 } f3EsaProbeStatsSoamPmExtP2rUnavailableTime OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the probe to reflector unavailable delta_ts which begins to increment when FLR is greater than availability threshold for 'n' consecutive delta_ts. It is incremented until FLR is less than or equal to availability threshold for 'n' consecutive delta_ts." ::= { f3EsaProbeStatsSoamPmExtEntry 11 } f3EsaProbeStatsSoamPmExtR2PUnavailableTime OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the reflector to probe unavailable delta_ts which begins to increment when FLR is greater than availability threshold for 'n' consecutive delta_ts. It is incremented until FLR is less than or equal to availability threshold for 'n' consecutive delta_ts." ::= { f3EsaProbeStatsSoamPmExtEntry 12 } f3EsaProbeStatsSoamPmExtMinAbsRTJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum absolute round-trip (two-way) jitter in a measurement interval (microseconds)." ::= { f3EsaProbeStatsSoamPmExtEntry 13 } f3EsaProbeStatsSoamPmExtMaxAbsRTJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum absolute round-trip (two-way) jitter in a measurement interval (microseconds)." ::= { f3EsaProbeStatsSoamPmExtEntry 14 } f3EsaProbeStatsSoamPmExtAvgAbsRTJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average absolute round-trip (two-way) jitter in a measurement interval (microseconds)." ::= { f3EsaProbeStatsSoamPmExtEntry 15 } f3EsaProbeStatsSoamPmExtNumAbsRTJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of absolute round-trip (two-way) jitter samples (microseconds)." ::= { f3EsaProbeStatsSoamPmExtEntry 16 } f3EsaProbeStatsSoamPmExtSumAbsRTJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sum of absolute round-trip (two-way) jitter samples (microseconds)." ::= { f3EsaProbeStatsSoamPmExtEntry 17 } f3EsaProbeStatsSoamPmExtSumOfSqAbsRTJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sum of squares of absolute round-trip (two-way) jitter samples (microseconds^2)." ::= { f3EsaProbeStatsSoamPmExtEntry 18 } f3EsaProbeStatsSoamPmExtMaxP2RFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum P2R (Forward) FDR in a measurement interval (microseconds)." ::= { f3EsaProbeStatsSoamPmExtEntry 19 } f3EsaProbeStatsSoamPmExtAvgP2RFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average P2R (Forward) FDR in a measurement interval (microseconds)." ::= { f3EsaProbeStatsSoamPmExtEntry 20 } f3EsaProbeStatsSoamPmExtNumP2RFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of P2R (Forward) FDR samples (microseconds)." ::= { f3EsaProbeStatsSoamPmExtEntry 21 } f3EsaProbeStatsSoamPmExtSumP2RFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sum of P2R (Forward) FDR samples (microseconds)." ::= { f3EsaProbeStatsSoamPmExtEntry 22 } f3EsaProbeStatsSoamPmExtSumOfSqP2RFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sum of squares of P2R (Forward) FDR samples (microseconds^2)." ::= { f3EsaProbeStatsSoamPmExtEntry 23 } f3EsaProbeStatsSoamPmExtMaxR2PFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum R2P (Backward) FDR in a measurement interval (microseconds)." ::= { f3EsaProbeStatsSoamPmExtEntry 24 } f3EsaProbeStatsSoamPmExtAvgR2PFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average R2P (Backward) FDR in a measurement interval (microseconds)." ::= { f3EsaProbeStatsSoamPmExtEntry 25 } f3EsaProbeStatsSoamPmExtNumR2PFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of R2P (Backward) FDR samples (microseconds)." ::= { f3EsaProbeStatsSoamPmExtEntry 26 } f3EsaProbeStatsSoamPmExtSumR2PFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sum of R2P (Backward) FDR samples (microseconds)." ::= { f3EsaProbeStatsSoamPmExtEntry 27 } f3EsaProbeStatsSoamPmExtSumOfSqR2PFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sum of squares of R2P (Backward) FDR samples (microseconds^2)." ::= { f3EsaProbeStatsSoamPmExtEntry 28 } f3EsaProbeStatsSoamPmExtMaxRTFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum round-trip (two-way) FDR in a measurement interval (microseconds)." ::= { f3EsaProbeStatsSoamPmExtEntry 29 } f3EsaProbeStatsSoamPmExtAvgRTFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average round-trip (two-way) FDR in a measurement interval (microseconds)." ::= { f3EsaProbeStatsSoamPmExtEntry 30 } f3EsaProbeStatsSoamPmExtNumRTFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of round-trip (two-way) FDR samples (microseconds)." ::= { f3EsaProbeStatsSoamPmExtEntry 31 } f3EsaProbeStatsSoamPmExtSumRTFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sum of round-trip (two-way) FDR samples (microseconds)." ::= { f3EsaProbeStatsSoamPmExtEntry 32 } f3EsaProbeStatsSoamPmExtSumOfSqRTFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sum of squares of round-trip (two-way) FDR samples (microseconds^2)." ::= { f3EsaProbeStatsSoamPmExtEntry 33 } f3EsaProbeStatsSoamPmExtP2rAvailableDeltaTs OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Probe to reflector available delta_ts which begins to increment when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts." ::= { f3EsaProbeStatsSoamPmExtEntry 34 } f3EsaProbeStatsSoamPmExtR2pAvailableDeltaTs OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Reflector to probe available delta_ts which begins to increment when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts." ::= { f3EsaProbeStatsSoamPmExtEntry 35 } f3EsaProbeStatsSoamPmExtP2rUnavailableDeltaTs OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Probe to reflector unavailable delta_ts which begins to increment when FLR is greater than availability threshold for 'n' consecutive delta_ts." ::= { f3EsaProbeStatsSoamPmExtEntry 36 } f3EsaProbeStatsSoamPmExtR2pUnavailableDeltaTs OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Reflector to probe unavailable delta_ts which begins to increment when FLR is greater than availability threshold for 'n' consecutive delta_ts." ::= { f3EsaProbeStatsSoamPmExtEntry 37 } f3EsaProbeStatsSoamPmExtElapsedTime OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The elapsed time (monotonic time) for the interval which could be less or more than measurement interval based on which the Time of Day was moved forward or backwards respectively (miliseconds)." ::= { f3EsaProbeStatsSoamPmExtEntry 38 } -- -- Esa Probe History Soam Pm Ext Table -- f3EsaProbeHistorySoamPmExtTable OBJECT-TYPE SYNTAX SEQUENCE OF F3EsaProbeHistorySoamPmExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of ESA Probe MEF 35 related history kept for a particular ESA Probe entity. These reflect the history data." ::= { cmServAssuranceObjects 22 } f3EsaProbeHistorySoamPmExtEntry OBJECT-TYPE SYNTAX F3EsaProbeHistorySoamPmExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3EsaProbeHistorySoamPmExtTable." AUGMENTS { esaProbeHistoryEntry } ::= { f3EsaProbeHistorySoamPmExtTable 1 } F3EsaProbeHistorySoamPmExtEntry ::= SEQUENCE { f3EsaProbeHistorySoamPmExtMinP2RFlr PerfCounter64, f3EsaProbeHistorySoamPmExtMaxP2RFlr PerfCounter64, f3EsaProbeHistorySoamPmExtAvgP2RFlr PerfCounter64, f3EsaProbeHistorySoamPmExtMinR2PFlr PerfCounter64, f3EsaProbeHistorySoamPmExtMaxR2PFlr PerfCounter64, f3EsaProbeHistorySoamPmExtAvgR2PFlr PerfCounter64, f3EsaProbeHistorySoamPmExtP2rSeverelyErroredDeltaTs PerfCounter64, f3EsaProbeHistorySoamPmExtR2PSeverelyErroredDeltaTs PerfCounter64, f3EsaProbeHistorySoamPmExtP2rAvailableTime PerfCounter64, f3EsaProbeHistorySoamPmExtR2PAvailableTime PerfCounter64, f3EsaProbeHistorySoamPmExtP2rUnavailableTime PerfCounter64, f3EsaProbeHistorySoamPmExtR2PUnavailableTime PerfCounter64, f3EsaProbeHistorySoamPmExtMinAbsRTJitter PerfCounter64, f3EsaProbeHistorySoamPmExtMaxAbsRTJitter PerfCounter64, f3EsaProbeHistorySoamPmExtAvgAbsRTJitter PerfCounter64, f3EsaProbeHistorySoamPmExtNumAbsRTJitter PerfCounter64, f3EsaProbeHistorySoamPmExtSumAbsRTJitter PerfCounter64, f3EsaProbeHistorySoamPmExtSumOfSqAbsRTJitter PerfCounter64, f3EsaProbeHistorySoamPmExtMaxP2RFDR PerfCounter64, f3EsaProbeHistorySoamPmExtAvgP2RFDR PerfCounter64, f3EsaProbeHistorySoamPmExtNumP2RFDR PerfCounter64, f3EsaProbeHistorySoamPmExtSumP2RFDR PerfCounter64, f3EsaProbeHistorySoamPmExtSumOfSqP2RFDR PerfCounter64, f3EsaProbeHistorySoamPmExtMaxR2PFDR PerfCounter64, f3EsaProbeHistorySoamPmExtAvgR2PFDR PerfCounter64, f3EsaProbeHistorySoamPmExtNumR2PFDR PerfCounter64, f3EsaProbeHistorySoamPmExtSumR2PFDR PerfCounter64, f3EsaProbeHistorySoamPmExtSumOfSqR2PFDR PerfCounter64, f3EsaProbeHistorySoamPmExtMaxRTFDR PerfCounter64, f3EsaProbeHistorySoamPmExtAvgRTFDR PerfCounter64, f3EsaProbeHistorySoamPmExtNumRTFDR PerfCounter64, f3EsaProbeHistorySoamPmExtSumRTFDR PerfCounter64, f3EsaProbeHistorySoamPmExtSumOfSqRTFDR PerfCounter64, f3EsaProbeHistorySoamPmExtP2rAvailableDeltaTs PerfCounter64, f3EsaProbeHistorySoamPmExtR2pAvailableDeltaTs PerfCounter64, f3EsaProbeHistorySoamPmExtP2rUnavailableDeltaTs PerfCounter64, f3EsaProbeHistorySoamPmExtR2pUnavailableDeltaTs PerfCounter64, f3EsaProbeHistorySoamPmExtElapsedTime PerfCounter64 } f3EsaProbeHistorySoamPmExtMinP2RFlr OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the minimum probe to reflector FLR." ::= { f3EsaProbeHistorySoamPmExtEntry 1 } f3EsaProbeHistorySoamPmExtMaxP2RFlr OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the maximum probe to reflector FLR." ::= { f3EsaProbeHistorySoamPmExtEntry 2 } f3EsaProbeHistorySoamPmExtAvgP2RFlr OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the average probe to reflector FLR." ::= { f3EsaProbeHistorySoamPmExtEntry 3 } f3EsaProbeHistorySoamPmExtMinR2PFlr OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the minimum reflector to probe FLR." ::= { f3EsaProbeHistorySoamPmExtEntry 4 } f3EsaProbeHistorySoamPmExtMaxR2PFlr OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the maximum reflector to probe FLR." ::= { f3EsaProbeHistorySoamPmExtEntry 5 } f3EsaProbeHistorySoamPmExtAvgR2PFlr OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the average reflector to probe FLR." ::= { f3EsaProbeHistorySoamPmExtEntry 6 } f3EsaProbeHistorySoamPmExtP2rSeverelyErroredDeltaTs OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of delta_ts in which the FLR is greater than availability threshold in the probe to reflector direction." ::= { f3EsaProbeHistorySoamPmExtEntry 7 } f3EsaProbeHistorySoamPmExtR2PSeverelyErroredDeltaTs OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of delta_ts in which the FLR is greater than availability threshold in the reflector to probe direction." ::= { f3EsaProbeHistorySoamPmExtEntry 8 } f3EsaProbeHistorySoamPmExtP2rAvailableTime OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the probe to reflector available delta_ts which begins to increment when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts. It is incremented until FLR is greater than availability threshold for 'n' consecutive delta_ts." ::= { f3EsaProbeHistorySoamPmExtEntry 9 } f3EsaProbeHistorySoamPmExtR2PAvailableTime OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the reflector to probe available delta_ts which begins to increment when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts. It is incremented until FLR is greater than availability threshold for 'n' consecutive delta_ts." ::= { f3EsaProbeHistorySoamPmExtEntry 10 } f3EsaProbeHistorySoamPmExtP2rUnavailableTime OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the probe to reflector unavailable delta_ts which begins to increment when FLR is greater than availability threshold for 'n' consecutive delta_ts. It is incremented until FLR is less than or equal to availability threshold for 'n' consecutive delta_ts." ::= { f3EsaProbeHistorySoamPmExtEntry 11 } f3EsaProbeHistorySoamPmExtR2PUnavailableTime OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the reflector to probe unavailable delta_ts which begins to increment when FLR is greater than availability threshold for 'n' consecutive delta_ts. It is incremented until FLR is less than or equal to availability threshold for 'n' consecutive delta_ts." ::= { f3EsaProbeHistorySoamPmExtEntry 12 } f3EsaProbeHistorySoamPmExtMinAbsRTJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum absolute round-trip (two-way) jitter in a measurement interval." ::= { f3EsaProbeHistorySoamPmExtEntry 13 } f3EsaProbeHistorySoamPmExtMaxAbsRTJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum absolute round-trip (two-way) jitter in a measurement interval." ::= { f3EsaProbeHistorySoamPmExtEntry 14 } f3EsaProbeHistorySoamPmExtAvgAbsRTJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average absolute round-trip (two-way) jitter in a measurement interval." ::= { f3EsaProbeHistorySoamPmExtEntry 15 } f3EsaProbeHistorySoamPmExtNumAbsRTJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of absolute round-trip (two-way) jitter samples." ::= { f3EsaProbeHistorySoamPmExtEntry 16 } f3EsaProbeHistorySoamPmExtSumAbsRTJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sum of absolute round-trip (two-way) jitter samples." ::= { f3EsaProbeHistorySoamPmExtEntry 17 } f3EsaProbeHistorySoamPmExtSumOfSqAbsRTJitter OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sum of squares of absolute round-trip (two-way) jitter samples." ::= { f3EsaProbeHistorySoamPmExtEntry 18 } f3EsaProbeHistorySoamPmExtMaxP2RFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum P2R (Forward) FDR in a measurement interval." ::= { f3EsaProbeHistorySoamPmExtEntry 19 } f3EsaProbeHistorySoamPmExtAvgP2RFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average P2R (Forward) FDR in a measurement interval." ::= { f3EsaProbeHistorySoamPmExtEntry 20 } f3EsaProbeHistorySoamPmExtNumP2RFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of P2R (Forward) FDR samples." ::= { f3EsaProbeHistorySoamPmExtEntry 21 } f3EsaProbeHistorySoamPmExtSumP2RFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sum of P2R (Forward) FDR samples." ::= { f3EsaProbeHistorySoamPmExtEntry 22 } f3EsaProbeHistorySoamPmExtSumOfSqP2RFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sum of squares of P2R (Forward) FDR samples." ::= { f3EsaProbeHistorySoamPmExtEntry 23 } f3EsaProbeHistorySoamPmExtMaxR2PFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum R2P (Backward) FDR in a measurement interval." ::= { f3EsaProbeHistorySoamPmExtEntry 24 } f3EsaProbeHistorySoamPmExtAvgR2PFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average R2P (Backward) FDR in a measurement interval." ::= { f3EsaProbeHistorySoamPmExtEntry 25 } f3EsaProbeHistorySoamPmExtNumR2PFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of R2P (Backward) FDR samples." ::= { f3EsaProbeHistorySoamPmExtEntry 26 } f3EsaProbeHistorySoamPmExtSumR2PFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sum of R2P (Backward) FDR samples." ::= { f3EsaProbeHistorySoamPmExtEntry 27 } f3EsaProbeHistorySoamPmExtSumOfSqR2PFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sum of squares of R2P (Backward) FDR samples." ::= { f3EsaProbeHistorySoamPmExtEntry 28 } f3EsaProbeHistorySoamPmExtMaxRTFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum round-trip (two-way) FDR in a measurement interval." ::= { f3EsaProbeHistorySoamPmExtEntry 29 } f3EsaProbeHistorySoamPmExtAvgRTFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average round-trip (two-way) FDR in a measurement interval." ::= { f3EsaProbeHistorySoamPmExtEntry 30 } f3EsaProbeHistorySoamPmExtNumRTFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of round-trip (two-way) FDR samples." ::= { f3EsaProbeHistorySoamPmExtEntry 31 } f3EsaProbeHistorySoamPmExtSumRTFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sum of round-trip (two-way) FDR samples." ::= { f3EsaProbeHistorySoamPmExtEntry 32 } f3EsaProbeHistorySoamPmExtSumOfSqRTFDR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Sum of squares of round-trip (two-way) FDR samples." ::= { f3EsaProbeHistorySoamPmExtEntry 33 } f3EsaProbeHistorySoamPmExtP2rAvailableDeltaTs OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Probe to reflector available delta_ts which begins to increment when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts." ::= { f3EsaProbeHistorySoamPmExtEntry 34 } f3EsaProbeHistorySoamPmExtR2pAvailableDeltaTs OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Reflector to probe available delta_ts which begins to increment when FLR is less than or equal to availability threshold for 'n' consecutive delta_ts." ::= { f3EsaProbeHistorySoamPmExtEntry 35 } f3EsaProbeHistorySoamPmExtP2rUnavailableDeltaTs OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Probe to reflector unavailable delta_ts which begins to increment when FLR is greater than availability threshold for 'n' consecutive delta_ts." ::= { f3EsaProbeHistorySoamPmExtEntry 36 } f3EsaProbeHistorySoamPmExtR2pUnavailableDeltaTs OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Reflector to probe unavailable delta_ts which begins to increment when FLR is greater than availability threshold for 'n' consecutive delta_ts." ::= { f3EsaProbeHistorySoamPmExtEntry 37 } f3EsaProbeHistorySoamPmExtElapsedTime OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The elapsed time (monotonic time) for the interval which could be less or more than measurement interval based on which the Time of Day was moved forward or backwards respectively (miliseconds)." ::= { f3EsaProbeHistorySoamPmExtEntry 38 } -- -- Notifications, i.e., traps. -- -- -- Operate Loopback event -- cmOperateLoopbackTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "This is the Operate Loopback Notification sent by the agent. The actual attribute value is sent by the agent in the form of a varbind list, as additional objects, as per SMIv2 (RFC2578, Section 8.1)." ::= { cmServAssuranceNotifications 1 } -- -- Release Loopback event -- cmReleaseLoopbackTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "This is the Release Loopback Notification sent by the agent. The actual attribute value is sent by the agent in the form of a varbind list, as additional objects, as per SMIv2 (RFC2578, Section 8.1)." ::= { cmServAssuranceNotifications 2 } -- -- ESA Threshold Crossing Alerts -- esaProbeThresholdCrossingAlert NOTIFICATION-TYPE OBJECTS { esaProbeStatsThresholdIndex, esaProbeStatsThresholdVariable, esaProbeStatsThresholdAbsValueLo, esaProbeStatsThresholdAbsValueHi, esaProbeStatsThresholdMonValue } STATUS current DESCRIPTION "This trap is sent each time a threshold on a PM condition on ESA Probe is crossed." ::= { cmServAssuranceNotifications 3 } -- -- Conformance -- cmServAssuranceCompliances OBJECT IDENTIFIER ::= {cmServAssuranceConformance 1} cmServAssuranceGroups OBJECT IDENTIFIER ::= {cmServAssuranceConformance 2} cmServAssuranceCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Describes the requirements for conformance to the CM ServAssurance group." MODULE -- this module MANDATORY-GROUPS { cmServAssuranceObjectGroup, cmServAssuranceNotifGroup, cmEcpaGroup, cmEsaGroup, cmServAssuranceGenNotifGroup, cmServAssuranceEsaNotifGroup } ::= { cmServAssuranceCompliances 1 } cmServAssuranceObjectGroup OBJECT-GROUP OBJECTS { ecpaControlIndex, ecpaControlSourcePort, ecpaControlTestType, ecpaControlNumFrames, ecpaControlDuration, ecpaControlInjectorDirection, ecpaControlMonitorDirection, ecpaControlStream1, ecpaControlStream2, ecpaControlStream3, ecpaControlAction, ecpaControlTestStatus, ecpaControlEcpaType, ecpaControlMonitorPortType, ecpaConfigStreamIndex, ecpaConfigStreamName, ecpaConfigStreamFrameSize, ecpaConfigStreamRate, ecpaConfigStreamPayloadType, ecpaConfigStreamSignature, ecpaConfigStreamDestinationMAC, ecpaConfigStreamSourceMAC, ecpaConfigStreamOuterVlanEnabled, ecpaConfigStreamOuterVlanId, ecpaConfigStreamOuterVlanPrio, ecpaConfigStreamOuterVlanEtherType, ecpaConfigStreamInnerVlanEnabled, ecpaConfigStreamInnerVlanId, ecpaConfigStreamInnerVlanPrio, ecpaConfigStreamInnerVlanEtherType, ecpaConfigStreamIpVersion, ecpaConfigStreamIpV4Address, ecpaConfigStreamIpV6Address, ecpaConfigStreamPrioMapMode, ecpaConfigStreamPrioVal, ecpaConfigStreamInnerVlan2Enabled, ecpaConfigStreamInnerVlan2Id, ecpaConfigStreamInnerVlan2Prio, ecpaConfigStreamInnerVlan2EtherType, ecpaConfigStreamDestIpV4Address, ecpaConfigStreamDestIpV6Address, ecpaConfigStreamUsePortSourceMAC, ecpaConfigStreamRateHi, ecpaConfigStreamUdpControl, ecpaConfigStreamUdpSrcPort, ecpaConfigStreamUdpDstPort, ecpaTestStreamIndex, ecpaTestStreamSourcePort, ecpaTestStreamName, ecpaTestStreamFrameSize, ecpaTestStreamRate, ecpaTestStreamPayloadType, ecpaTestStreamSignature, ecpaTestStreamDestinationMAC, ecpaTestStreamSourceMAC, ecpaTestStreamOuterVlanEnabled, ecpaTestStreamOuterVlanId, ecpaTestStreamOuterVlanPrio, ecpaTestStreamOuterVlanEtherType, ecpaTestStreamInnerVlanEnabled, ecpaTestStreamInnerVlanId, ecpaTestStreamInnerVlanPrio, ecpaTestStreamInnerVlanEtherType, ecpaTestStreamIpVersion, ecpaTestStreamIpV4Address, ecpaTestStreamIpV6Address, ecpaTestStreamPrioMapMode, ecpaTestStreamPrioVal, ecpaTestStreamMonStartTime, ecpaTestStreamMonEndTime, ecpaTestStreamMonElapsedTime, ecpaTestStreamMonTxFrames, ecpaTestStreamMonRxFrames, ecpaTestStreamMonRxPercentSuccess, ecpaTestStreamMonRxOutOfSeqErrs, ecpaTestStreamMonRxSeqGaps, ecpaTestStreamMonRxNonEcpaFrames, ecpaTestStreamMonRxMinDelay, ecpaTestStreamMonRxMaxDelay, ecpaTestStreamMonRxAvgDelay, ecpaTestStreamMonRx1stFrameSize, ecpaTestStreamMonRx1stFrame1Octets, ecpaTestStreamMonRx1stFrame2Octets, ecpaTestStreamMonRx1stFrame3Octets, ecpaTestStreamMonRx1stFrame4Octets, ecpaTestStreamMonRx1stFrame5Octets, ecpaTestStreamMonRx1stFrame6Octets, ecpaTestStreamMonRx1stFrame7Octets, ecpaTestStreamMonRx1stFrame8Octets, ecpaTestStreamMonRx1stFrame9Octets, ecpaTestStreamMonRx1stFrame10Octets, ecpaTestStreamMonRxBitRate, ecpaTestStreamInnerVlan2Enabled, ecpaTestStreamInnerVlan2Id, ecpaTestStreamInnerVlan2Prio, ecpaTestStreamInnerVlan2EtherType, ecpaTestStreamDestIpV4Address, ecpaTestStreamDestIpV6Address, ecpaTestStreamConfigChanged, ecpaTestStreamRateHi, ecpaTestStreamUdpControl, ecpaTestStreamUdpSrcPort, ecpaTestStreamUdpDstPort, esaProbeIndex, esaProbeName, esaProbeSourcePort, esaProbeAssocSchedGroup, esaProbeDirection, esaProbeProtocol, esaProbeSrcIpAddress, esaProbeSrcSubnetMask, esaProbeDestIpAddress, esaProbeSrcMep, esaProbeDestMepType, esaProbeDestMepMacAddr, esaProbeDestMepId, esaProbeVlanTagEnabled, esaProbeVlanTagEtherType, esaProbeVlanId, esaProbeVlanPrio, esaProbeInnerVlanTagEnabled, esaProbeInnerVlanTagEtherType, esaProbeInnerVlanId, esaProbeInnerVlanPrio, esaProbeIpPrioMapMode, esaProbeIpPriority, esaProbePktsPerSample, esaProbePktSize, esaProbeInterPktGap, esaProbePktDeadInterval, esaProbeResponseTimeout, esaProbeY1731DmmPktSize, esaProbeY1731LmmInterval, esaProbeY1731DmmInterval, esaProbeHistoryBins, esaProbeHistoryInterval, esaProbeDistHistoryBins, esaProbeDistHistoryInterval, esaProbeCreationTime, esaProbeStorageType, esaProbeRowStatus, esaProbeInner2VlanTagEnabled, esaProbeInner2VlanTagEtherType, esaProbeInner2VlanId, esaProbeInner2VlanPrio, esaProbeAdminState, esaProbeOperationalState, esaProbeSecondaryState, esaProbeScheduleGroupIndex, esaProbeScheduleGroupDescr, esaProbeScheduleGroupProbeList, esaProbeScheduleGroupType, esaProbeScheduleGroupStartTime, esaProbeScheduleGroupDuration, esaProbeScheduleGroupInterval, esaProbeScheduleGroupAction, esaProbeScheduleGroupStatus, esaProbeScheduleGroupStorageType, esaProbeScheduleGroupRowStatus, esaProbeScheduleGroupActionProbeList, esaReflectorIndex, esaReflectorName, esaReflectorIpAddress, esaReflectorSubnetMask, esaReflectorSourcePort, esaReflectorIpPrioMapMode, esaReflectorIpPriority, esaReflectorAction, esaReflectorSuspended, esaReflectorCreationTime, esaReflectorStorageType, esaReflectorRowStatus,esaReflectorDirection, esaReflectorAdminState, esaReflectorOperationalState, esaReflectorSecondaryState, esaProbeStatsDestinationIndex, esaProbeStatsCOSIndex, esaProbeStatsIndex, esaProbeStatsIntervalType, esaProbeStatsCOS, esaProbeStatsValid, esaProbeStatsAction, esaProbeStatsP2RPkts, esaProbeStatsP2RErredPkts, esaProbeStatsP2RSyncErrs, esaProbeStatsP2RLostPkts, esaProbeStatsR2PPkts, esaProbeStatsR2PErredPkts, esaProbeStatsR2PSyncErrs, esaProbeStatsR2PLostPkts, esaProbeStatsLostPkts, esaProbeStatsSeqGaps, esaProbeStatsOutOfSeqErrs, esaProbeStatsMinRoundTripDelay, esaProbeStatsMaxRoundTripDelay, esaProbeStatsAvgRoundTripDelay, esaProbeStatsSumRoundTripDelay, esaProbeStatsSumOfSqRoundTripDelay, esaProbeStatsMinOnewayP2RDelay, esaProbeStatsMaxOnewayP2RDelay, esaProbeStatsAvgOnewayP2RDelay, esaProbeStatsSumOnewayP2RDelay, esaProbeStatsSumOfSqOnewayP2RDelay, esaProbeStatsMinOnewayR2PDelay, esaProbeStatsMaxOnewayR2PDelay, esaProbeStatsAvgOnewayR2PDelay, esaProbeStatsSumOnewayR2PDelay, esaProbeStatsSumOfSqOnewayR2PDelay, esaProbeStatsMinPosP2RJitter, esaProbeStatsMaxPosP2RJitter, esaProbeStatsNumPosP2RJitter, esaProbeStatsSumPosP2RJitter, esaProbeStatsSumOfSqPosP2RJitter, esaProbeStatsMinNegP2RJitter, esaProbeStatsMaxNegP2RJitter, esaProbeStatsNumNegP2RJitter, esaProbeStatsSumNegP2RJitter, esaProbeStatsSumOfSqNegP2RJitter, esaProbeStatsMinPosR2PJitter, esaProbeStatsMaxPosR2PJitter, esaProbeStatsNumPosR2PJitter, esaProbeStatsSumPosR2PJitter, esaProbeStatsSumOfSqPosR2PJitter, esaProbeStatsMinNegR2PJitter, esaProbeStatsMaxNegR2PJitter, esaProbeStatsNumNegR2PJitter, esaProbeStatsSumNegR2PJitter, esaProbeStatsSumOfSqNegR2PJitter, esaProbeStatsY1731P2RNegLossOccurrences, esaProbeStatsY1731R2PNegLossOccurrences, esaProbeStatsY1731RxLmSamples, esaProbeStatsY1731RxDmSamples, esaProbeStatsY1731P2RFrames, esaProbeStatsY1731R2PFrames, esaProbeStatsAvgAbsP2RJitter, esaProbeStatsAvgAbsR2PJitter, esaProbeStatsMaxAbsP2RJitter, esaProbeStatsMaxAbsR2PJitter, esaProbeStatsMinAbsP2RJitter, esaProbeStatsMinAbsR2PJitter, esaProbeStatsNumAbsP2RJitter, esaProbeStatsNumAbsR2PJitter, esaProbeStatsSumAbsP2RJitter, esaProbeStatsSumAbsR2PJitter, esaProbeStatsSumOfSqAbsP2RJitter, esaProbeStatsSumOfSqAbsR2PJitter, esaProbeHistoryDestinationIndex, esaProbeHistoryCOSIndex, esaProbeHistoryIndex, esaProbeHistoryTime, esaProbeHistoryValid, esaProbeHistoryAction, esaProbeHistoryCOS, esaProbeHistoryP2RPkts, esaProbeHistoryP2RErredPkts, esaProbeHistoryP2RSyncErrs, esaProbeHistoryP2RLostPkts, esaProbeHistoryR2PPkts, esaProbeHistoryR2PErredPkts, esaProbeHistoryR2PSyncErrs, esaProbeHistoryR2PLostPkts, esaProbeHistoryLostPkts, esaProbeHistorySeqGaps, esaProbeHistoryOutOfSeqErrs, esaProbeHistoryMinRoundTripDelay, esaProbeHistoryMaxRoundTripDelay, esaProbeHistoryAvgRoundTripDelay, esaProbeHistorySumRoundTripDelay, esaProbeHistorySumOfSqRoundTripDelay, esaProbeHistoryMinOnewayP2RDelay, esaProbeHistoryMaxOnewayP2RDelay, esaProbeHistoryAvgOnewayP2RDelay, esaProbeHistorySumOnewayP2RDelay, esaProbeHistorySumOfSqOnewayP2RDelay, esaProbeHistoryMinOnewayR2PDelay, esaProbeHistoryMaxOnewayR2PDelay, esaProbeHistoryAvgOnewayR2PDelay, esaProbeHistorySumOnewayR2PDelay, esaProbeHistorySumOfSqOnewayR2PDelay, esaProbeHistoryMinPosP2RJitter, esaProbeHistoryMaxPosP2RJitter, esaProbeHistoryNumPosP2RJitter, esaProbeHistorySumPosP2RJitter, esaProbeHistorySumOfSqPosP2RJitter, esaProbeHistoryMinNegP2RJitter, esaProbeHistoryMaxNegP2RJitter, esaProbeHistoryNumNegP2RJitter, esaProbeHistorySumNegP2RJitter, esaProbeHistorySumOfSqNegP2RJitter, esaProbeHistoryMinPosR2PJitter, esaProbeHistoryMaxPosR2PJitter, esaProbeHistoryNumPosR2PJitter, esaProbeHistorySumPosR2PJitter, esaProbeHistorySumOfSqPosR2PJitter, esaProbeHistoryMinNegR2PJitter, esaProbeHistoryMaxNegR2PJitter, esaProbeHistoryNumNegR2PJitter, esaProbeHistorySumNegR2PJitter, esaProbeHistorySumOfSqNegR2PJitter, esaProbeHistoryY1731P2RNegLossOccurrences, esaProbeHistoryY1731R2PNegLossOccurrences, esaProbeHistoryY1731RxLmSamples, esaProbeHistoryY1731RxDmSamples, esaProbeHistoryY1731P2RFrames, esaProbeHistoryY1731R2PFrames, esaProbeHistoryAvgAbsP2RJitter, esaProbeHistoryAvgAbsR2PJitter, esaProbeHistoryMaxAbsP2RJitter, esaProbeHistoryMaxAbsR2PJitter, esaProbeHistoryMinAbsP2RJitter, esaProbeHistoryMinAbsR2PJitter, esaProbeHistoryNumAbsP2RJitter, esaProbeHistoryNumAbsR2PJitter, esaProbeHistorySumAbsP2RJitter, esaProbeHistorySumAbsR2PJitter, esaProbeHistorySumOfSqAbsP2RJitter, esaProbeHistorySumOfSqAbsR2PJitter, esaProbeDistStatsConfigIndex, esaProbeDistStatsConfigType, esaProbeDistStatsConfigMinVal, esaProbeDistStatsConfigMaxVal, esaProbeDistStatsConfigNumBins, esaProbeDistStatsDestinationIndex, esaProbeDistStatsCOSIndex, esaProbeDistStatsCOS, esaProbeDistStatsNumBins, esaProbeDistStatsLTMin, esaProbeDistStatsGTMax, esaProbeDistStatsBinIndex, esaProbeDistStatsBinLower, esaProbeDistStatsBinUpper, esaProbeDistStatsBinNumSamples, esaProbeDistHistoryDestinationIndex, esaProbeDistHistoryCOSIndex, esaProbeDistHistoryCOS, esaProbeDistHistoryIndex, esaProbeDistHistoryTime, esaProbeDistHistoryAction, esaProbeDistHistoryNumBins, esaProbeDistHistoryLTMin, esaProbeDistHistoryGTMax, esaProbeDistHistoryBinIndex, esaProbeDistHistoryBinLower, esaProbeDistHistoryBinUpper, esaProbeDistHistoryBinNumSamples, esaProbeStatsThresholdIndex, esaProbeStatsThresholdVariable, esaProbeStatsThresholdAbsValueLo, esaProbeStatsThresholdAbsValueHi, esaProbeStatsThresholdMonValue, esaProbeCOSConfigIndex, esaProbeCOSConfigType, esaProbeCOSConfigInterval, esaProbeCOSConfigPktSize, esaProbeCOSConfigStorageType, esaProbeCOSConfigRowStatus, esaProbeDestinationIndex, esaProbeDestinationMepType, esaProbeDestinationMepMacAddr, esaProbeDestinationMepId, esaProbeDestinationStorageType, esaProbeDestinationRowStatus } STATUS deprecated DESCRIPTION "***************** THIS OBJECT GROUP IS NOW DEPRECATED *************** A collection of objects used to manage the CM ServAssurance group." ::= { cmServAssuranceGroups 1 } cmServAssuranceNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { cmOperateLoopbackTrap, cmReleaseLoopbackTrap, esaProbeThresholdCrossingAlert } STATUS deprecated DESCRIPTION "***************** THIS OBJECT GROUP IS NOW DEPRECATED ****************** A collection of notifications used in the CM ServAssurance group." ::= { cmServAssuranceGroups 2 } cmEcpaGroup OBJECT-GROUP OBJECTS { ecpaControlIndex, ecpaControlSourcePort, ecpaControlTestType, ecpaControlNumFrames, ecpaControlDuration, ecpaControlInjectorDirection, ecpaControlMonitorDirection, ecpaControlStream1, ecpaControlStream2, ecpaControlStream3, ecpaControlAction, ecpaControlTestStatus, ecpaControlStorageType, ecpaControlRowStatus, ecpaControlEcpaType, ecpaConfigStreamIndex, ecpaConfigStreamName, ecpaConfigStreamFrameSize, ecpaConfigStreamRate, ecpaConfigStreamPayloadType, ecpaConfigStreamSignature, ecpaConfigStreamDestinationMAC, ecpaConfigStreamSourceMAC, ecpaConfigStreamOuterVlanEnabled, ecpaConfigStreamOuterVlanId, ecpaConfigStreamOuterVlanPrio, ecpaConfigStreamOuterVlanEtherType, ecpaConfigStreamInnerVlanEnabled, ecpaConfigStreamInnerVlanId, ecpaConfigStreamInnerVlanPrio, ecpaConfigStreamInnerVlanEtherType, ecpaConfigStreamIpVersion, ecpaConfigStreamIpV4Address, ecpaConfigStreamIpV6Address, ecpaConfigStreamPrioMapMode, ecpaConfigStreamPrioVal, ecpaConfigStreamInnerVlan2Enabled, ecpaConfigStreamInnerVlan2Id, ecpaConfigStreamInnerVlan2Prio, ecpaConfigStreamInnerVlan2EtherType, ecpaConfigStreamDestIpV4Address, ecpaConfigStreamDestIpV6Address, ecpaConfigStreamUsePortSourceMAC, ecpaConfigStreamRateHi, ecpaConfigStreamUdpControl, ecpaConfigStreamUdpSrcPort, ecpaConfigStreamUdpDstPort, ecpaTestStreamIndex, ecpaTestStreamSourcePort, ecpaTestStreamName, ecpaTestStreamFrameSize, ecpaTestStreamRate, ecpaTestStreamPayloadType, ecpaTestStreamSignature, ecpaTestStreamDestinationMAC, ecpaTestStreamSourceMAC, ecpaTestStreamOuterVlanEnabled, ecpaTestStreamOuterVlanId, ecpaTestStreamOuterVlanPrio, ecpaTestStreamOuterVlanEtherType, ecpaTestStreamInnerVlanEnabled, ecpaTestStreamInnerVlanId, ecpaTestStreamInnerVlanPrio, ecpaTestStreamInnerVlanEtherType, ecpaTestStreamIpVersion, ecpaTestStreamIpV4Address, ecpaTestStreamIpV6Address, ecpaTestStreamPrioMapMode, ecpaTestStreamPrioVal, ecpaTestStreamMonStartTime, ecpaTestStreamMonEndTime, ecpaTestStreamMonElapsedTime, ecpaTestStreamMonTxFrames, ecpaTestStreamMonRxFrames, ecpaTestStreamMonRxPercentSuccess, ecpaTestStreamMonRxOutOfSeqErrs, ecpaTestStreamMonRxSeqGaps, ecpaTestStreamMonRxNonEcpaFrames, ecpaTestStreamMonRxMinDelay, ecpaTestStreamMonRxMaxDelay, ecpaTestStreamMonRxAvgDelay, ecpaTestStreamMonRx1stFrameSize, ecpaTestStreamMonRx1stFrame1Octets, ecpaTestStreamMonRx1stFrame2Octets, ecpaTestStreamMonRx1stFrame3Octets, ecpaTestStreamMonRx1stFrame4Octets, ecpaTestStreamMonRx1stFrame5Octets, ecpaTestStreamMonRx1stFrame6Octets, ecpaTestStreamMonRx1stFrame7Octets, ecpaTestStreamMonRx1stFrame8Octets, ecpaTestStreamMonRx1stFrame9Octets, ecpaTestStreamMonRx1stFrame10Octets, ecpaTestStreamMonRxBitRate, ecpaTestStreamInnerVlan2Enabled, ecpaTestStreamInnerVlan2Id, ecpaTestStreamInnerVlan2Prio, ecpaTestStreamInnerVlan2EtherType, ecpaTestStreamDestIpV4Address, ecpaTestStreamDestIpV6Address, ecpaTestStreamConfigChanged, ecpaTestStreamRateHi, ecpaTestStreamUdpControl, ecpaTestStreamUdpSrcPort, ecpaTestStreamUdpDstPort } STATUS current DESCRIPTION "A collection of objects used to manage the CM ServAssurance ECPA functionality." ::= { cmServAssuranceGroups 3 } cmEsaGroup OBJECT-GROUP OBJECTS { esaProbeIndex, esaProbeName, esaProbeSourcePort, esaProbeAssocSchedGroup, esaProbeDirection, esaProbeProtocol, esaProbeSrcIpAddress, esaProbeSrcSubnetMask, esaProbeDestIpAddress, esaProbeSrcMep, esaProbeDestMepType, esaProbeDestMepMacAddr, esaProbeDestMepId, esaProbeVlanTagEnabled, esaProbeVlanTagEtherType, esaProbeVlanId, esaProbeVlanPrio, esaProbeInnerVlanTagEnabled, esaProbeInnerVlanTagEtherType, esaProbeInnerVlanId, esaProbeInnerVlanPrio, esaProbeIpPrioMapMode, esaProbeIpPriority, esaProbePktsPerSample, esaProbePktSize, esaProbeInterPktGap, esaProbePktDeadInterval, esaProbeResponseTimeout, esaProbeY1731DmmPktSize, esaProbeY1731LmmInterval, esaProbeY1731DmmInterval, esaProbeHistoryBins, esaProbeHistoryInterval, esaProbeDistHistoryBins, esaProbeDistHistoryInterval, esaProbeCreationTime, esaProbeStorageType, esaProbeRowStatus, esaProbeMultiCOSEnabled, esaProbeSLAMonitorType, esaProbeCOSType, esaProbeSLMMulticastMACEnabled, esaProbeSOAMInterval, esaProbeSOAMPktSize, esaProbeAdminState, esaProbeOperationalState, esaProbeSecondaryState, esaProbeAlias, esaProbeScheduleGroupIndex, esaProbeScheduleGroupDescr, esaProbeScheduleGroupProbeList, esaProbeScheduleGroupType, esaProbeScheduleGroupStartTime, esaProbeScheduleGroupDuration, esaProbeScheduleGroupInterval, esaProbeScheduleGroupAction, esaProbeScheduleGroupStatus, esaProbeScheduleGroupStorageType, esaProbeScheduleGroupRowStatus, esaReflectorIndex, esaReflectorName, esaReflectorIpAddress, esaReflectorSubnetMask, esaReflectorSourcePort, esaReflectorIpPrioMapMode, esaReflectorIpPriority, esaReflectorAction, esaReflectorSuspended, esaReflectorCreationTime, esaReflectorStorageType, esaReflectorRowStatus, esaReflectorDirection, esaReflectorAdminState, esaReflectorOperationalState, esaReflectorSecondaryState, esaReflectorAlias, esaProbeStatsDestinationIndex, esaProbeStatsCOSIndex, esaProbeStatsIndex, esaProbeStatsIntervalType, esaProbeStatsCOS, esaProbeStatsValid, esaProbeStatsAction, esaProbeStatsP2RPkts, esaProbeStatsP2RErredPkts, esaProbeStatsP2RSyncErrs, esaProbeStatsP2RLostPkts, esaProbeStatsR2PPkts, esaProbeStatsR2PErredPkts, esaProbeStatsR2PSyncErrs, esaProbeStatsR2PLostPkts, esaProbeStatsLostPkts, esaProbeStatsSeqGaps, esaProbeStatsOutOfSeqErrs, esaProbeStatsMinRoundTripDelay, esaProbeStatsMaxRoundTripDelay, esaProbeStatsAvgRoundTripDelay, esaProbeStatsSumRoundTripDelay, esaProbeStatsSumOfSqRoundTripDelay, esaProbeStatsMinOnewayP2RDelay, esaProbeStatsMaxOnewayP2RDelay, esaProbeStatsAvgOnewayP2RDelay, esaProbeStatsSumOnewayP2RDelay, esaProbeStatsSumOfSqOnewayP2RDelay, esaProbeStatsMinOnewayR2PDelay, esaProbeStatsMaxOnewayR2PDelay, esaProbeStatsAvgOnewayR2PDelay, esaProbeStatsSumOnewayR2PDelay, esaProbeStatsSumOfSqOnewayR2PDelay, esaProbeStatsMinPosP2RJitter, esaProbeStatsMaxPosP2RJitter, esaProbeStatsNumPosP2RJitter, esaProbeStatsSumPosP2RJitter, esaProbeStatsSumOfSqPosP2RJitter, esaProbeStatsMinNegP2RJitter, esaProbeStatsMaxNegP2RJitter, esaProbeStatsNumNegP2RJitter, esaProbeStatsSumNegP2RJitter, esaProbeStatsSumOfSqNegP2RJitter, esaProbeStatsMinPosR2PJitter, esaProbeStatsMaxPosR2PJitter, esaProbeStatsNumPosR2PJitter, esaProbeStatsSumPosR2PJitter, esaProbeStatsSumOfSqPosR2PJitter, esaProbeStatsMinNegR2PJitter, esaProbeStatsMaxNegR2PJitter, esaProbeStatsNumNegR2PJitter, esaProbeStatsSumNegR2PJitter, esaProbeStatsSumOfSqNegR2PJitter, esaProbeStatsY1731P2RNegLossOccurrences, esaProbeStatsY1731R2PNegLossOccurrences, esaProbeStatsY1731RxLmSamples, esaProbeStatsY1731RxDmSamples, esaProbeStatsY1731P2RFrames, esaProbeStatsY1731R2PFrames, esaProbeStatsAvgAbsP2RJitter, esaProbeStatsAvgAbsR2PJitter, esaProbeStatsMaxAbsP2RJitter, esaProbeStatsMaxAbsR2PJitter, esaProbeStatsMinAbsP2RJitter, esaProbeStatsMinAbsR2PJitter, esaProbeStatsNumAbsP2RJitter, esaProbeStatsNumAbsR2PJitter, esaProbeStatsSumAbsP2RJitter, esaProbeStatsSumAbsR2PJitter, esaProbeStatsSumOfSqAbsP2RJitter, esaProbeStatsSumOfSqAbsR2PJitter, esaProbeHistoryDestinationIndex, esaProbeHistoryCOSIndex, esaProbeHistoryIndex, esaProbeHistoryTime, esaProbeHistoryValid, esaProbeHistoryAction, esaProbeHistoryCOS, esaProbeHistoryP2RPkts, esaProbeHistoryP2RErredPkts, esaProbeHistoryP2RSyncErrs, esaProbeHistoryP2RLostPkts, esaProbeHistoryR2PPkts, esaProbeHistoryR2PErredPkts, esaProbeHistoryR2PSyncErrs, esaProbeHistoryR2PLostPkts, esaProbeHistoryLostPkts, esaProbeHistorySeqGaps, esaProbeHistoryOutOfSeqErrs, esaProbeHistoryMinRoundTripDelay, esaProbeHistoryMaxRoundTripDelay, esaProbeHistoryAvgRoundTripDelay, esaProbeHistorySumRoundTripDelay, esaProbeHistorySumOfSqRoundTripDelay, esaProbeHistoryMinOnewayP2RDelay, esaProbeHistoryMaxOnewayP2RDelay, esaProbeHistoryAvgOnewayP2RDelay, esaProbeHistorySumOnewayP2RDelay, esaProbeHistorySumOfSqOnewayP2RDelay, esaProbeHistoryMinOnewayR2PDelay, esaProbeHistoryMaxOnewayR2PDelay, esaProbeHistoryAvgOnewayR2PDelay, esaProbeHistorySumOnewayR2PDelay, esaProbeHistorySumOfSqOnewayR2PDelay, esaProbeHistoryMinPosP2RJitter, esaProbeHistoryMaxPosP2RJitter, esaProbeHistoryNumPosP2RJitter, esaProbeHistorySumPosP2RJitter, esaProbeHistorySumOfSqPosP2RJitter, esaProbeHistoryMinNegP2RJitter, esaProbeHistoryMaxNegP2RJitter, esaProbeHistoryNumNegP2RJitter, esaProbeHistorySumNegP2RJitter, esaProbeHistorySumOfSqNegP2RJitter, esaProbeHistoryMinPosR2PJitter, esaProbeHistoryMaxPosR2PJitter, esaProbeHistoryNumPosR2PJitter, esaProbeHistorySumPosR2PJitter, esaProbeHistorySumOfSqPosR2PJitter, esaProbeHistoryMinNegR2PJitter, esaProbeHistoryMaxNegR2PJitter, esaProbeHistoryNumNegR2PJitter, esaProbeHistorySumNegR2PJitter, esaProbeHistorySumOfSqNegR2PJitter, esaProbeHistoryY1731P2RNegLossOccurrences, esaProbeHistoryY1731R2PNegLossOccurrences, esaProbeHistoryY1731RxLmSamples, esaProbeHistoryY1731RxDmSamples, esaProbeHistoryY1731P2RFrames, esaProbeHistoryY1731R2PFrames, esaProbeHistoryAvgAbsP2RJitter, esaProbeHistoryAvgAbsR2PJitter, esaProbeHistoryMaxAbsP2RJitter, esaProbeHistoryMaxAbsR2PJitter, esaProbeHistoryMinAbsP2RJitter, esaProbeHistoryMinAbsR2PJitter, esaProbeHistoryNumAbsP2RJitter, esaProbeHistoryNumAbsR2PJitter, esaProbeHistorySumAbsP2RJitter, esaProbeHistorySumAbsR2PJitter, esaProbeHistorySumOfSqAbsP2RJitter, esaProbeHistorySumOfSqAbsR2PJitter, esaProbeDistStatsConfigIndex, esaProbeDistStatsConfigType, esaProbeDistStatsConfigMinVal, esaProbeDistStatsConfigMaxVal, esaProbeDistStatsConfigNumBins, esaProbeDistStatsDestinationIndex, esaProbeDistStatsCOSIndex, esaProbeDistStatsCOS, esaProbeDistStatsNumBins, esaProbeDistStatsLTMin, esaProbeDistStatsGTMax, esaProbeDistStatsBinIndex, esaProbeDistStatsBinLower, esaProbeDistStatsBinUpper, esaProbeDistStatsBinNumSamples, esaProbeDistHistoryDestinationIndex, esaProbeDistHistoryCOSIndex, esaProbeDistHistoryCOS, esaProbeDistHistoryIndex, esaProbeDistHistoryTime, esaProbeDistHistoryAction, esaProbeDistHistoryNumBins, esaProbeDistHistoryLTMin, esaProbeDistHistoryGTMax, esaProbeDistHistoryBinIndex, esaProbeDistHistoryBinLower, esaProbeDistHistoryBinUpper, esaProbeDistHistoryBinNumSamples, esaProbeStatsThresholdIndex, esaProbeStatsThresholdVariable, esaProbeStatsThresholdAbsValueLo, esaProbeStatsThresholdAbsValueHi, esaProbeStatsThresholdMonValue, esaProbeCOSConfigIndex, esaProbeCOSConfigType, esaProbeCOSConfigInterval, esaProbeCOSConfigPktSize, esaProbeCOSConfigStorageType, esaProbeCOSConfigRowStatus, esaProbeCOSConfigslmInterval, esaProbeCOSConfigslmPktSize, esaProbeCOSConfigSoamPmExtAvailFlrThreshold, esaProbeCOSConfigSoamPmExtFlrDeltaTNumLmPdus, esaProbeCOSConfigSoamPmExtConDeltaTsForAvail, esaProbeDestinationIndex,esaProbeDestinationMepType, esaProbeDestinationMepMacAddr, esaProbeDestinationMepId,esaProbeDestinationStorageType,esaProbeDestinationRowStatus, f3EsaProbeCOSConfigSoamPmExtAvailFlrThreshold, f3EsaProbeCOSConfigSoamPmExtFlrDeltaTNumLmPdus, f3EsaProbeCOSConfigSoamPmExtConDeltaTsForAvail, f3EsaProbeStatsSoamPmExtMinP2RFlr, f3EsaProbeStatsSoamPmExtMaxP2RFlr, f3EsaProbeStatsSoamPmExtAvgP2RFlr, f3EsaProbeStatsSoamPmExtMinR2PFlr, f3EsaProbeStatsSoamPmExtMaxR2PFlr, f3EsaProbeStatsSoamPmExtAvgR2PFlr, f3EsaProbeStatsSoamPmExtP2rSeverelyErroredDeltaTs, f3EsaProbeStatsSoamPmExtR2PSeverelyErroredDeltaTs, f3EsaProbeStatsSoamPmExtP2rAvailableTime, f3EsaProbeStatsSoamPmExtR2PAvailableTime, f3EsaProbeStatsSoamPmExtP2rUnavailableTime, f3EsaProbeStatsSoamPmExtR2PUnavailableTime, f3EsaProbeStatsSoamPmExtMinAbsRTJitter, f3EsaProbeStatsSoamPmExtMaxAbsRTJitter, f3EsaProbeStatsSoamPmExtAvgAbsRTJitter, f3EsaProbeStatsSoamPmExtNumAbsRTJitter, f3EsaProbeStatsSoamPmExtSumAbsRTJitter, f3EsaProbeStatsSoamPmExtSumOfSqAbsRTJitter, f3EsaProbeStatsSoamPmExtMaxP2RFDR, f3EsaProbeStatsSoamPmExtAvgP2RFDR, f3EsaProbeStatsSoamPmExtNumP2RFDR, f3EsaProbeStatsSoamPmExtSumP2RFDR, f3EsaProbeStatsSoamPmExtSumOfSqP2RFDR, f3EsaProbeStatsSoamPmExtMaxR2PFDR, f3EsaProbeStatsSoamPmExtAvgR2PFDR, f3EsaProbeStatsSoamPmExtNumR2PFDR, f3EsaProbeStatsSoamPmExtSumR2PFDR, f3EsaProbeStatsSoamPmExtSumOfSqR2PFDR, f3EsaProbeStatsSoamPmExtMaxRTFDR, f3EsaProbeStatsSoamPmExtAvgRTFDR, f3EsaProbeStatsSoamPmExtNumRTFDR, f3EsaProbeStatsSoamPmExtSumRTFDR, f3EsaProbeStatsSoamPmExtSumOfSqRTFDR, f3EsaProbeStatsSoamPmExtP2rAvailableDeltaTs, f3EsaProbeStatsSoamPmExtR2pAvailableDeltaTs, f3EsaProbeStatsSoamPmExtP2rUnavailableDeltaTs, f3EsaProbeStatsSoamPmExtR2pUnavailableDeltaTs, f3EsaProbeStatsSoamPmExtElapsedTime, f3EsaProbeHistorySoamPmExtMinP2RFlr, f3EsaProbeHistorySoamPmExtMaxP2RFlr, f3EsaProbeHistorySoamPmExtAvgP2RFlr, f3EsaProbeHistorySoamPmExtMinR2PFlr, f3EsaProbeHistorySoamPmExtMaxR2PFlr, f3EsaProbeHistorySoamPmExtAvgR2PFlr, f3EsaProbeHistorySoamPmExtP2rSeverelyErroredDeltaTs, f3EsaProbeHistorySoamPmExtR2PSeverelyErroredDeltaTs, f3EsaProbeHistorySoamPmExtP2rAvailableTime, f3EsaProbeHistorySoamPmExtR2PAvailableTime, f3EsaProbeHistorySoamPmExtP2rUnavailableTime, f3EsaProbeHistorySoamPmExtR2PUnavailableTime, f3EsaProbeHistorySoamPmExtMinAbsRTJitter, f3EsaProbeHistorySoamPmExtMaxAbsRTJitter, f3EsaProbeHistorySoamPmExtAvgAbsRTJitter, f3EsaProbeHistorySoamPmExtNumAbsRTJitter, f3EsaProbeHistorySoamPmExtSumAbsRTJitter, f3EsaProbeHistorySoamPmExtSumOfSqAbsRTJitter, f3EsaProbeHistorySoamPmExtMaxP2RFDR, f3EsaProbeHistorySoamPmExtAvgP2RFDR, f3EsaProbeHistorySoamPmExtNumP2RFDR, f3EsaProbeHistorySoamPmExtSumP2RFDR, f3EsaProbeHistorySoamPmExtSumOfSqP2RFDR, f3EsaProbeHistorySoamPmExtMaxR2PFDR, f3EsaProbeHistorySoamPmExtAvgR2PFDR, f3EsaProbeHistorySoamPmExtNumR2PFDR, f3EsaProbeHistorySoamPmExtSumR2PFDR, f3EsaProbeHistorySoamPmExtSumOfSqR2PFDR, f3EsaProbeHistorySoamPmExtMaxRTFDR, f3EsaProbeHistorySoamPmExtAvgRTFDR, f3EsaProbeHistorySoamPmExtNumRTFDR, f3EsaProbeHistorySoamPmExtSumRTFDR, f3EsaProbeHistorySoamPmExtSumOfSqRTFDR, f3EsaProbeHistorySoamPmExtP2rAvailableDeltaTs, f3EsaProbeHistorySoamPmExtR2pAvailableDeltaTs, f3EsaProbeHistorySoamPmExtP2rUnavailableDeltaTs, f3EsaProbeHistorySoamPmExtR2pUnavailableDeltaTs, f3EsaProbeHistorySoamPmExtElapsedTime } STATUS current DESCRIPTION "A collection of objects used to manage the CM ServAssurance ESA functionality." ::= { cmServAssuranceGroups 4 } cmServAssuranceGenNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { cmOperateLoopbackTrap, cmReleaseLoopbackTrap } STATUS current DESCRIPTION "A collection of notifications used in the generic CM ServAssurance functionality." ::= { cmServAssuranceGroups 5 } cmServAssuranceEsaNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { esaProbeThresholdCrossingAlert } STATUS current DESCRIPTION "A collection of notifications used in the CM ServAssurance ESA functionality." ::= { cmServAssuranceGroups 6 } cmBertGroup OBJECT-GROUP OBJECTS { bertControlIndex, bertControlSourceEntity, bertControlTestMode, bertControlDuration, bertControlStream, bertControlAction, bertControlTestStatus, bertConfigStreamIndex, bertConfigStreamName, bertConfigStreamTxPattern, bertConfigStreamErrInjectEnabled, bertConfigStreamErrInjectRate, bertConfigStreamErrInjectRateMultiplier, bertConfigStreamUserPatternLength, bertConfigStreamUserPattern, bertTestStreamIndex, bertTestStreamName, bertTestStreamTxPattern, bertTestStreamErrInjectEnabled, bertTestStreamErrInjectRate, bertTestStreamErrInjectRateMultiplier, bertTestStreamUserPatternLength, bertTestStreamUserPattern, bertTestStreamMonStartTime, bertTestStreamMonEndTime, bertTestStreamMonElapsedTime, bertTestStreamMonSyncState, bertTestStreamMonRxPattern, bertTestStreamMonSyncCounts, bertTestStreamMonRxBitErrsSinceStart, bertTestStreamMonRxBitsSinceStart, bertTestStreamMonRxESsSinceStart, bertTestStreamMonRxErrRateSinceStart, bertTestStreamMonRxErrRateMultiplierSinceStart, bertTestStreamMonRxBitErrsSinceLastSync, bertTestStreamMonRxBitsSinceLastSync, bertTestStreamMonRxESsSinceLastSync, bertTestStreamMonRxErrRateSinceLastSync, bertTestStreamMonRxErrRateMultiplierSinceLastSync, bertTestStreamConfigChangedFlag, bertTestStreamMonOOSSsSinceStart } STATUS current DESCRIPTION "A collection of objects used to manage the CM ServAssurance BERT functionality." ::= { cmServAssuranceGroups 7 } END