F3-AMP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, IpAddress FROM SNMPv2-SMI TruthValue, RowStatus, StorageType, DisplayString, DateAndTime, VariablePointer, TEXTUAL-CONVENTION FROM SNMPv2-TC fsp150cm FROM ADVA-MIB VlanId FROM CM-COMMON-MIB IpSourceAddrType, IpManagementTunnelType, IpManagementTunnelEncapsulationType FROM CM-IP-MIB; f3AMPMIB MODULE-IDENTITY LAST-UPDATED "201209310000Z" ORGANIZATION "ADVA Optical Networking" CONTACT-INFO " Jakub Zalewski ADVA Optical Networking, Inc. Tel: +48 58 7716 411 E-mail: jzalewski@advaoptical.com Postal: ul. Slaska 35/37 81-310 Gdynia, Poland" DESCRIPTION "This module defines the Automatic Management Provisioning MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking." REVISION "201209300000Z" DESCRIPTION " Notes from release 201209300000Z, (1)MIB version ready for release FSP150CC 5.6CC." ::= {fsp150cm 24} -- -- Textual Conventions -- AMPRole ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Defines client or server role." SYNTAX INTEGER { client (1), server (2) } AMPStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Defines AMP Status." SYNTAX INTEGER { notAvailable (1), disabled (2), associatingActive (3), associatingPassive (4), associated (5), noPeer (6) } AMPConfigStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Defines AMP Configuration Status." SYNTAX INTEGER { none (1), -- none provision (2), -- provision request sent to Client noPeer (3), -- no EFM peer request (4), -- provisioning request received by Client configSuccess (5), -- configuration succeeded on Client configFail (6), -- congiguration failed on Client timeout (7) -- response timeout } AMPProtocol ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Defines protocol over which AMP messages are sent." SYNTAX INTEGER { efmOam (1) } AMPConfigAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Defines Actions available for f3AmpConfig object" SYNTAX INTEGER { noAction (1), clearStats (2) } -- -- OID definitions -- f3AmpConfigObjects OBJECT IDENTIFIER ::= {f3AMPMIB 1} f3AmpStatsObjects OBJECT IDENTIFIER ::= {f3AMPMIB 2} f3AmpConformance OBJECT IDENTIFIER ::= {f3AMPMIB 3} -- -- AMP Client/Server Configuration table -- f3AmpConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF F3AmpConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Automatic Management Provisioning configuration instance for configuration purposes." ::= { f3AmpConfigObjects 1 } f3AmpConfigEntry OBJECT-TYPE SYNTAX F3AmpConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3AmpConfigTable." INDEX { f3AmpConfigIndex } ::= { f3AmpConfigTable 1 } F3AmpConfigEntry ::= SEQUENCE { f3AmpConfigIndex Integer32, f3AmpConfigRole AMPRole, f3AmpConfigProtocol AMPProtocol, f3AmpConfigEnabled TruthValue, f3AmpConfigPort VariablePointer, f3AmpConfigStatus AMPStatus, f3AmpConfigRemSysName DisplayString, f3AmpConfigRemSysIpAddr IpAddress, f3AmpConfigRemSysIpMask IpAddress, f3AmpConfigRemSysDefGateway IpAddress, f3AmpConfigRemSysSNMPV1IfName DisplayString, f3AmpConfigRemSysSrcIpAddrType IpSourceAddrType, f3AmpConfigRemSysSrcIpAddrIfName DisplayString, f3AmpConfigRemTunnelIndex Integer32, f3AmpConfigRemTunnelName DisplayString, f3AmpConfigRemTunnelType IpManagementTunnelType, f3AmpConfigRemTunnelIpAddr IpAddress, f3AmpConfigRemTunnelIpMask IpAddress, f3AmpConfigRemTunnelVlanId VlanId, f3AmpConfigRemTunnelSVlanId VlanId, f3AmpConfigRemTunnelSVlanIdEnabled TruthValue, f3AmpConfigRemTunnelRip2PktsEnabled TruthValue, f3AmpConfigRemTunnelCOS Integer32, f3AmpConfigRemTunnelCIR Unsigned32, f3AmpConfigRemTunnelEIR Unsigned32, f3AmpConfigRemTunnelBufferSize Unsigned32, f3AmpConfigRemTunnelEncapType IpManagementTunnelEncapsulationType, f3AmpConfigRemTunnelMtu Integer32, f3AmpConfigAction AMPConfigAction, f3AmpConfigStorageType StorageType, f3AmpConfigRowStatus RowStatus } f3AmpConfigIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify this AMP Config within the System." ::= { f3AmpConfigEntry 1 } f3AmpConfigRole OBJECT-TYPE SYNTAX AMPRole MAX-ACCESS read-create STATUS current DESCRIPTION "Configures AMP instance to be either Client or Server." ::= { f3AmpConfigEntry 2 } f3AmpConfigProtocol OBJECT-TYPE SYNTAX AMPProtocol MAX-ACCESS read-create STATUS current DESCRIPTION "Configures protocol over which AMP message will be transported." ::= { f3AmpConfigEntry 3 } f3AmpConfigEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enables or Disables AMP on a Port." ::= { f3AmpConfigEntry 4 } f3AmpConfigPort OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "Port on which AMP Server or Client will operate. This port will transmit/receive AMP messages. The AMP can operate on Access Ports and Network Port and f3AmpConfigPort shall point to either cmEthernetAccPortIndex or cmEthernetNetPortIndex." ::= { f3AmpConfigEntry 5 } f3AmpConfigStatus OBJECT-TYPE SYNTAX AMPStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The Status of AMP." ::= { f3AmpConfigEntry 6 } f3AmpConfigRemSysName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies sysName which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the sysName value which was received from the AMP Server." ::= { f3AmpConfigEntry 7 } f3AmpConfigRemSysIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies System IP address which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the System IP address value which was received from the AMP Server." ::= { f3AmpConfigEntry 8 } f3AmpConfigRemSysIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies System IP mask which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the System IP mask value which was received from the AMP Server." ::= { f3AmpConfigEntry 9 } f3AmpConfigRemSysDefGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies System Default Gateway which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the System Default Gateway value which was received from the AMP Server." ::= { f3AmpConfigEntry 10 } f3AmpConfigRemSysSNMPV1IfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies System SNMPV1 Interface Name which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object shows the System SNMPV1 Interface Name value which was received from the AMP Server." ::= { f3AmpConfigEntry 11 } f3AmpConfigRemSysSrcIpAddrType OBJECT-TYPE SYNTAX IpSourceAddrType MAX-ACCESS read-only STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies System Source IP Address type which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the System Source IP Address Type value which was received from the AMP Server." ::= { f3AmpConfigEntry 12 } f3AmpConfigRemSysSrcIpAddrIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies System Source IP Interface name sent in an AMP message to be configured on an AMP Client device. When f3AmpConfigRole is 'client' this object shows the SystemSource IP Interface value which was received from the AMP Server." ::= { f3AmpConfigEntry 13 } f3AmpConfigRemTunnelIndex OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies index of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the index of a Management Tunnel which was received from the AMP Server." ::= { f3AmpConfigEntry 14 } f3AmpConfigRemTunnelName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies a Management Tunnel name which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the Management Tunnel name which was received from the AMP Server." ::= { f3AmpConfigEntry 15 } f3AmpConfigRemTunnelType OBJECT-TYPE SYNTAX IpManagementTunnelType MAX-ACCESS read-create STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies a Management Tunnel type value which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the Management Tunnel type value which was received from the AMP Server." ::= { f3AmpConfigEntry 16 } f3AmpConfigRemTunnelIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies IP Address of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the IP Address of a Management Tunnel which was received from the AMP Server." ::= { f3AmpConfigEntry 17 } f3AmpConfigRemTunnelIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies IP Mask of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the IP Mask of a Management Tunnel which was received from the AMP Server." ::= { f3AmpConfigEntry 18 } f3AmpConfigRemTunnelVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-create STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies VlanId of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the VlanId of a Management Tunnel which was received from the AMP Server." ::= { f3AmpConfigEntry 19 } f3AmpConfigRemTunnelSVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-create STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies S-TAG VlanId of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the S-TAG VlanId of a Management Tunnel which was received from the AMP Server." ::= { f3AmpConfigEntry 20 } f3AmpConfigRemTunnelSVlanIdEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies a Management Tunnel S-TAG VlanId Enable value which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the a Management Tunnel S-TAG VlanId Enabled value which was received from the AMP Server." ::= { f3AmpConfigEntry 21 } f3AmpConfigRemTunnelRip2PktsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies a Management Tunnel RIP2 Packates Enabled value which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the a Management Tunnel RIP2 Packates Enabled value which was received from the AMP Server." ::= { f3AmpConfigEntry 22 } f3AmpConfigRemTunnelCOS OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies COS of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the COS of a Management Tunnel which was received from the AMP Server." ::= { f3AmpConfigEntry 23 } f3AmpConfigRemTunnelCIR OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies CIR of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the CIR of a Management Tunnel which was received from the AMP Server." ::= { f3AmpConfigEntry 24 } f3AmpConfigRemTunnelEIR OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies EIR of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the EIR of a Management Tunnel which was received from the AMP Server." ::= { f3AmpConfigEntry 25 } f3AmpConfigRemTunnelBufferSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies Buffer Size of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the Buffer Size of a Management Tunnel which was received from the AMP Server." ::= { f3AmpConfigEntry 26 } f3AmpConfigRemTunnelEncapType OBJECT-TYPE SYNTAX IpManagementTunnelEncapsulationType MAX-ACCESS read-create STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies Encapsulation Type of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the Encapsulation Type of a Management Tunnel which was received from the AMP Server." ::= { f3AmpConfigEntry 27 } f3AmpConfigRemTunnelMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When f3AmpConfigRole is 'server' this object specifies MTU of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the MTU of a Management Tunnel which was received from the AMP Server." ::= { f3AmpConfigEntry 28 } f3AmpConfigAction OBJECT-TYPE SYNTAX AMPConfigAction MAX-ACCESS read-create STATUS current DESCRIPTION "This object may be used to initiate user action on this AMP Config instance." ::= { f3AmpConfigEntry 29 } f3AmpConfigStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3AmpConfigEntry 30 } f3AmpConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3AmpConfigRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3AmpConfigRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3AmpConfigEntry 31 } -- -- AMP Stats -- f3AmpStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF F3AmpStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Automatic Management Provisioning Statistics" ::= { f3AmpStatsObjects 1 } f3AmpStatsEntry OBJECT-TYPE SYNTAX F3AmpStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3AmpStatsTable." INDEX { f3AmpConfigIndex } ::= { f3AmpStatsTable 1 } F3AmpStatsEntry ::= SEQUENCE { f3AmpStatsProvDataTx Unsigned32, f3AmpStatsProvDataRx Unsigned32, f3AmpStatsProvRequestTx Unsigned32, f3AmpStatsProvRequestRx Unsigned32, f3AmpStatsConfigSuccessTx Unsigned32, f3AmpStatsConfigSuccessRx Unsigned32, f3AmpStatsConfigFailTx Unsigned32, f3AmpStatsConfigFailRx Unsigned32, f3AmpStatsSpuriousMessageRx Unsigned32, f3AmpStatsTimeoutRx Unsigned32, f3AmpStatsLastRxStatus AMPConfigStatus, f3AmpStatsRxTimeStamp DateAndTime, f3AmpStatsLastTxStatus AMPConfigStatus, f3AmpStatsTxTimeStamp DateAndTime } f3AmpStatsProvDataTx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Provisioning Data messages sent by AMP Server." ::= { f3AmpStatsEntry 1 } f3AmpStatsProvDataRx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Provisioning Data messages received by AMP Client." ::= { f3AmpStatsEntry 2 } f3AmpStatsProvRequestTx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Provisioning Request messages sent by AMP Client." ::= { f3AmpStatsEntry 3 } f3AmpStatsProvRequestRx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Provisioning Request received sent by AMP Server." ::= { f3AmpStatsEntry 4 } f3AmpStatsConfigSuccessTx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Configuration Success messages sent sent by AMP Client." ::= { f3AmpStatsEntry 5 } f3AmpStatsConfigSuccessRx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Configuration Success messages received by AMP Server." ::= { f3AmpStatsEntry 6 } f3AmpStatsConfigFailTx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Configuration Success messages received by AMP Client." ::= { f3AmpStatsEntry 7 } f3AmpStatsConfigFailRx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Configuration Success messages received by AMP Server." ::= { f3AmpStatsEntry 8 } f3AmpStatsSpuriousMessageRx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Spurious messages received by AMP Client or Server" ::= { f3AmpStatsEntry 9 } f3AmpStatsTimeoutRx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages which were not received within the time out value. AMP Client can time out while waiting for Prov Data message. AMP Server can time out while waiting for Config Fail or Config Success message." ::= { f3AmpStatsEntry 10 } f3AmpStatsLastRxStatus OBJECT-TYPE SYNTAX AMPConfigStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Last received Configuration Status." ::= { f3AmpStatsEntry 11 } f3AmpStatsRxTimeStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of last received Configuration Status." ::= { f3AmpStatsEntry 12 } f3AmpStatsLastTxStatus OBJECT-TYPE SYNTAX AMPConfigStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Last sent Configuration Status." ::= { f3AmpStatsEntry 13 } f3AmpStatsTxTimeStamp OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Time of last sent Configuration Status." ::= { f3AmpStatsEntry 14 } -- -- Conformance -- f3AmpCompliances OBJECT IDENTIFIER ::= {f3AmpConformance 1} f3AmpGroups OBJECT IDENTIFIER ::= {f3AmpConformance 2} f3AmpCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Describes the requirements for conformance to the F3-AMP-MIB compilance." MODULE -- this module MANDATORY-GROUPS { f3AmpConfigGroup, f3AmpStatsGroup } ::= { f3AmpCompliances 1 } f3AmpConfigGroup OBJECT-GROUP OBJECTS { f3AmpConfigRole, f3AmpConfigProtocol, f3AmpConfigEnabled, f3AmpConfigPort, f3AmpConfigStatus, f3AmpConfigRemSysName, f3AmpConfigRemSysIpAddr, f3AmpConfigRemSysIpMask, f3AmpConfigRemSysDefGateway, f3AmpConfigRemSysSNMPV1IfName, f3AmpConfigRemSysSrcIpAddrType, f3AmpConfigRemSysSrcIpAddrIfName, f3AmpConfigRemTunnelIndex, f3AmpConfigRemTunnelName, f3AmpConfigRemTunnelType, f3AmpConfigRemTunnelIpAddr, f3AmpConfigRemTunnelIpMask, f3AmpConfigRemTunnelVlanId, f3AmpConfigRemTunnelSVlanId, f3AmpConfigRemTunnelSVlanIdEnabled, f3AmpConfigRemTunnelRip2PktsEnabled, f3AmpConfigRemTunnelCOS, f3AmpConfigRemTunnelCIR, f3AmpConfigRemTunnelEIR, f3AmpConfigRemTunnelBufferSize, f3AmpConfigRemTunnelEncapType, f3AmpConfigRemTunnelMtu, f3AmpConfigAction, f3AmpConfigStorageType, f3AmpConfigRowStatus } STATUS current DESCRIPTION "A collection of objects used to manage the AMP Configuration." ::= { f3AmpGroups 1 } f3AmpStatsGroup OBJECT-GROUP OBJECTS { f3AmpStatsProvDataTx, f3AmpStatsProvDataRx, f3AmpStatsProvRequestTx, f3AmpStatsProvRequestRx, f3AmpStatsConfigSuccessTx, f3AmpStatsConfigSuccessRx, f3AmpStatsConfigFailTx, f3AmpStatsConfigFailRx, f3AmpStatsSpuriousMessageRx, f3AmpStatsTimeoutRx, f3AmpStatsLastRxStatus, f3AmpStatsRxTimeStamp, f3AmpStatsLastTxStatus, f3AmpStatsTxTimeStamp } STATUS current DESCRIPTION "A collection of objects used to manage the AMP Statistics." ::= { f3AmpGroups 2 } END