F3-ERP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI TruthValue, RowStatus, StorageType, DisplayString, MacAddress, VariablePointer, TEXTUAL-CONVENTION FROM SNMPv2-TC neIndex FROM CM-ENTITY-MIB fsp150cm FROM ADVA-MIB AdminState, OperationalState, SecondaryState, VlanId, VlanPriority, VlanEthertype FROM CM-COMMON-MIB Dot1agCfmMDLevel FROM IEEE8021-CFM-MIB CmProtUnitType, CmProtUnitState FROM CM-PROTECTION-MIB; f3ErpMIB MODULE-IDENTITY LAST-UPDATED "201209130000Z" ORGANIZATION "ADVA Optical Networking" CONTACT-INFO " Jakub Zalewski ADVA Optical Networking, Inc. Tel: +48 58 7716 411 E-mail: jzalewski@advaoptical.com Postal: ul. Slaska 35/37 81-310 Gdynia, Poland" DESCRIPTION "This module defines the G.8032 Ethernet Ring Protection MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking." REVISION "201209130000Z" DESCRIPTION " Notes from release 201209130000Z, (1)MIB version ready for release FSP150CC 5.6CC." ::= {fsp150cm 25} -- -- Textual Conventions -- G8032Version ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Version of G.8032 ERP protocol" SYNTAX INTEGER { v1 (1), v2 (2) } RPLRole ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Ring Protocol Link role" SYNTAX INTEGER { none (1), neighbor (2), owner (3) } RingPortStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Status of Ring Port" SYNTAX INTEGER { unblocked (1), unblockedSF (2), unblockedSD (3), blockedRPL (4), blockedSF (5), blockedSD (6), blockedMS (7), blockedFS (8), blockedPending (9), subringInterConnect (10), subringInterConnectSF (11) } RingNodeState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "State of Ring Port" SYNTAX INTEGER { idle (1), protection (2), manual (3), forced (4), pending (5) } RAPSRequest ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Ring Automatic Protection Switch Request" SYNTAX INTEGER { noRequest (1), manual (2), forced (3), signailFail (4), signailDegrade (5), notApplicable (6) } ERPGroupAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "User action initiated on ERP group" SYNTAX INTEGER { noAction (1), forcedSwitch (2), manualSwitch (3), clearSwitch (4), resetStats (5) } RapsInterconnectionNode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Role of the sub-ring interconnection node" SYNTAX INTEGER { none (1), primary (2), secondary (3) } RapsMultipleFailure ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the interconnection node that has to perform the Manual Switch for minimizing interconnected ring segmentation" SYNTAX INTEGER { disabled (1), primary (2), secondary (3) } -- -- OID definitions -- f3ErpConfigObjects OBJECT IDENTIFIER ::= {f3ErpMIB 1} f3ErpStatsObjects OBJECT IDENTIFIER ::= {f3ErpMIB 2} f3ErpConformance OBJECT IDENTIFIER ::= {f3ErpMIB 3} -- -- Ethernet Ring Protection Group -- f3ErpGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF F3ErpGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Ring Protection instance for configuration purposes." ::= { f3ErpConfigObjects 1 } f3ErpGroupEntry OBJECT-TYPE SYNTAX F3ErpGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3ErpGroupTable." INDEX { neIndex, f3ErpGroupIndex } ::= { f3ErpGroupTable 1 } F3ErpGroupEntry ::= SEQUENCE { f3ErpGroupIndex Integer32, f3ErpGroupAdminState AdminState, f3ErpGroupOperationalState OperationalState, f3ErpGroupSecondaryState SecondaryState, f3ErpGroupRapsRingId Integer32, f3ErpGroupRapsNodeId MacAddress, f3ErpGroupRapsVlanId VlanId, f3ErpGroupRapsVlanPrio VlanPriority, f3ErpGroupRapsVlanEtherType Unsigned32, f3ErpGroupRapsMdLevel Dot1agCfmMDLevel, f3ErpGroupCompatibleVersion G8032Version, f3ErpGroupRevertive TruthValue, f3ErpGroupSubRingWithoutVirtChan TruthValue, f3ErpGroupGuardTime Integer32, f3ErpGroupWaitToRestore Integer32, f3ErpGroupHoldOffTime Integer32, f3ErpGroupRingPort0 VariablePointer, f3ErpGroupRingPort0MEP VariablePointer, f3ErpGroupRingPort0Role RPLRole, f3ErpGroupRingPort1 VariablePointer, f3ErpGroupRingPort1MEP VariablePointer, f3ErpGroupRingPort1Role RPLRole, f3ErpGroupProtectMgmtTunnel TruthValue, f3ErpGroupNodeState RingNodeState, f3ErpGroupWTRRemainingTime Integer32, f3ErpGroupTxRapsRequest RAPSRequest, f3ErpGroupTxRapsRplBlocked TruthValue, f3ErpGroupTxRapsDNF TruthValue, f3ErpGroupTxRapsBPR Integer32, f3ErpGroupAction ERPGroupAction, f3ErpGroupActionObject VariablePointer, f3ErpGroupUserLabel DisplayString, f3ErpGroupStorageType StorageType, f3ErpGroupRowStatus RowStatus, f3ErpGroupInterconnectionErp VariablePointer, f3ErpGroupInterconnectPropagateTc TruthValue, f3ErpGroupRapsVirtualChannelMep VariablePointer, f3ErpGroupMaxFpNum Integer32, f3ErpGroupRapsInterconnectionNode RapsInterconnectionNode, f3ErpGroupRapsMultipleFailure RapsMultipleFailure } f3ErpGroupIndex OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify this ERP Group within Network Element." ::= { f3ErpGroupEntry 1 } f3ErpGroupAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-create STATUS current DESCRIPTION "Administrative State of this ERP instance. INSERVICE is normal operation. MANAGEMENT suppresses alarms. DISABLED initiates blocking on ring port 0 and stops all RAPS processing and forwarding. The ERP instance must be in the MANAGEMENT or DISABLED state when modifying the following ERP instance attributes: rapsVID, ringPort0, ringPort1, ringPort0RPLRole, ringPort1RPLRole, rapsRingId, rapsMdLevel, subRingWithoutVirtualChannel, compatibleVersion." ::= { f3ErpGroupEntry 2 } f3ErpGroupOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "Operational State of this ERP instance. The ERP operational state is outage when there is an equipment failure causing the ERP to be non-functional; otherwise the operational state is normal." ::= { f3ErpGroupEntry 3 } f3ErpGroupSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "Secondary State of this ERP instance. The ERP secondary state is supporting entity outage (SGEO) when there is an equipment failure causing the ERP to be non-functional; otherwise the sescondary state is active." ::= { f3ErpGroupEntry 4 } f3ErpGroupRapsRingId OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Ring ID of this ERP instance. The value is used in the destination address of the RAPS PDU." ::= { f3ErpGroupEntry 5 } f3ErpGroupRapsNodeId OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Node ID of the local system for this ERP instance. The value is used as the Node ID in the RAPS PDU." ::= { f3ErpGroupEntry 6 } f3ErpGroupRapsVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-create STATUS current DESCRIPTION "VID value of the VLAN tag for transmitted/received RAPS PDUs for this ERP instance." ::= { f3ErpGroupEntry 7 } f3ErpGroupRapsVlanPrio OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-create STATUS current DESCRIPTION "P-bit value of the VLAN tag for transmitted RAPS PDUs for this ERP instance." ::= { f3ErpGroupEntry 8 } f3ErpGroupRapsVlanEtherType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "VID value of the VLAN tag for transmitted/received RAPS PDUs for this ERP instance." ::= { f3ErpGroupEntry 9 } f3ErpGroupRapsMdLevel OBJECT-TYPE SYNTAX Dot1agCfmMDLevel MAX-ACCESS read-create STATUS current DESCRIPTION "MD (or MEG) level of the transmitted/received RAPS PDUs for this ERP instance." ::= { f3ErpGroupEntry 10 } f3ErpGroupCompatibleVersion OBJECT-TYPE SYNTAX G8032Version MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates compatability with a version of G.8032 for this ring instance." ::= { f3ErpGroupEntry 11 } f3ErpGroupRevertive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Revertive control for the ring. Only applicable on the RPL Owner node." ::= { f3ErpGroupEntry 12 } f3ErpGroupSubRingWithoutVirtChan OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether R-APS channel forms a closed loop around the ring ENABLED: no RAPS Virtual Channel (i.e., open ring) DISABLED: RAPS forms a closed loop (major ring or sub-ring with virtual channel)" ::= { f3ErpGroupEntry 13 } f3ErpGroupGuardTime OBJECT-TYPE SYNTAX Integer32 (10..2000) MAX-ACCESS read-create STATUS current DESCRIPTION "The Guard Time value in milliseconds for this ERP instance." ::= { f3ErpGroupEntry 14 } f3ErpGroupWaitToRestore OBJECT-TYPE SYNTAX Integer32 (1..12) MAX-ACCESS read-create STATUS current DESCRIPTION "The Wait-to-Restore time value in minutes for this ERP instance." ::= { f3ErpGroupEntry 15 } f3ErpGroupHoldOffTime OBJECT-TYPE SYNTAX Integer32 (0..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "The Hold-off Time value in milliseconds for this ERP instance." ::= { f3ErpGroupEntry 16 } f3ErpGroupRingPort0 OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "Pointer to a Port instance which represents Ring Port 0 in the ERP Group. The pointer must be set to cmEthernetAccPortIndex instance if the Ring Port is an Access Port or to cmEthernetNetPortIndex if the Ring Port is a Network Port." ::= { f3ErpGroupEntry 17 } f3ErpGroupRingPort0MEP OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "Pointer to a CFM MEP instance monitoring Ring Port 0 for this ERP instance. The pointer must be set to dot1agCfmMepIfIndex instance." ::= { f3ErpGroupEntry 18 } f3ErpGroupRingPort0Role OBJECT-TYPE SYNTAX RPLRole MAX-ACCESS read-create STATUS current DESCRIPTION "RPL Role of Ring Port 0. When f3ErpGroupRingPort1Role is NEIGHBOR or OWNER, this value MUST be NONE." ::= { f3ErpGroupEntry 19 } f3ErpGroupRingPort1 OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "Pointer to a Port instance which represents Ring Port 1 in the ERP Group. The pointer must be set to cmEthernetAccPortIndex instance if the Ring Port is an Access Port or to cmEthernetNetPortIndex if the Ring Port is a Network Port." ::= { f3ErpGroupEntry 20 } f3ErpGroupRingPort1MEP OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "Pointer to a CFM MEP instance monitoring Ring Port 1 for this ERP instance. The pointer must be set to dot1agCfmMepIfIndex instance." ::= { f3ErpGroupEntry 21 } f3ErpGroupRingPort1Role OBJECT-TYPE SYNTAX RPLRole MAX-ACCESS read-create STATUS current DESCRIPTION "RPL Role of Ring Port 1. When f3ErpGroupRingPort0Role is NEIGHBOR or OWNER, this value MUST be NONE." ::= { f3ErpGroupEntry 22 } f3ErpGroupProtectMgmtTunnel OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indication of whether this ERP instance is protecting management Tunnels on the ring ports." ::= { f3ErpGroupEntry 23 } f3ErpGroupNodeState OBJECT-TYPE SYNTAX RingNodeState MAX-ACCESS read-only STATUS current DESCRIPTION "ERP Node state." ::= { f3ErpGroupEntry 24 } f3ErpGroupWTRRemainingTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining (in seconds) for this ERP instance to wait to restore." ::= { f3ErpGroupEntry 25 } f3ErpGroupTxRapsRequest OBJECT-TYPE SYNTAX RAPSRequest MAX-ACCESS read-only STATUS current DESCRIPTION "Request/State field fo the last generated R-APS message on the Ring Ports. Valid when the node is blocking." ::= { f3ErpGroupEntry 26 } f3ErpGroupTxRapsRplBlocked OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "RPL Blocked field fo the last generated R-APS message on the Ring Ports. Valid when the node is blocking." ::= { f3ErpGroupEntry 27 } f3ErpGroupTxRapsDNF OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Do Not Flush field fo the last generated R-APS message on the Ring Ports. Valid when the node is blocking." ::= { f3ErpGroupEntry 28 } f3ErpGroupTxRapsBPR OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Blocked Port Reference field fo the last generated R-APS message on the Ring Ports. Valid when the node is blocking." ::= { f3ErpGroupEntry 29 } f3ErpGroupAction OBJECT-TYPE SYNTAX ERPGroupAction MAX-ACCESS read-write STATUS current DESCRIPTION "User action performed on this ERP instance. For manualSwitch and forcedSwitch actions f3ErpGroupActionObject has to be specified prior to settng this object." ::= { f3ErpGroupEntry 30 } f3ErpGroupActionObject OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "Object identfier used to specify the OID of a port on which f3ErpGroupAction should occur. Applicable for manualSwitch and forcedSwitch actions. The pointer must be set to cmEthernetAccPortIndex instance if the Ring Port is an Access Port or to cmEthernetNetPortIndex if the Ring Port a Network Port." ::= { f3ErpGroupEntry 31} f3ErpGroupUserLabel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "User Label associated with the ERP Group." ::= { f3ErpGroupEntry 32 } f3ErpGroupStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3ErpGroupEntry 33 } f3ErpGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3ErpGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3ErpGroupRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3ErpGroupEntry 34 } f3ErpGroupInterconnectionErp OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "Oid of the associated Loop Avoidance instance at an interconnect node. Current only ERP instances are supported for this; in the future, STP instances may be as well." ::= { f3ErpGroupEntry 35 } f3ErpGroupInterconnectPropagateTc OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allows for propgation of Topology Change information in the protocol of the associated Loop Avoidance instance at an interconnect node. Derived from MI_RAPS_Propagate_TC in [G8032]" ::= { f3ErpGroupEntry 36 } f3ErpGroupRapsVirtualChannelMep OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "ID of MEP monitoring an UP MEP Monitoring the R-APS VID." ::= { f3ErpGroupEntry 37 } f3ErpGroupMaxFpNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The max number of flow point which the erp supports. This object is not supported - setting its value will not have any effect on the System." ::= { f3ErpGroupEntry 38 } f3ErpGroupRapsInterconnectionNode OBJECT-TYPE SYNTAX RapsInterconnectionNode MAX-ACCESS read-create STATUS current DESCRIPTION "Type of sub-ring interconnection node. PRIMARY/SECONDARY role for minimizing interconnected ring segmentation." ::= { f3ErpGroupEntry 39 } f3ErpGroupRapsMultipleFailure OBJECT-TYPE SYNTAX RapsMultipleFailure MAX-ACCESS read-create STATUS current DESCRIPTION "Sub-ring interconnection node that is designated to perform the Manual Switch for minimizing interconnected ring segmentation." ::= { f3ErpGroupEntry 40 } -- -- Ethernet Ring Protection Protected Flows -- f3ErpGroupProtectedFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF F3ErpGroupProtectedFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Flows which are protected by an ERP group instance. These flows can be access flows or multipoint flows depending on the traffic model of the ERP Ring Port." ::= { f3ErpConfigObjects 2 } f3ErpGroupProtectedFlowEntry OBJECT-TYPE SYNTAX F3ErpGroupProtectedFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3ErpGroupProtectedFlowsTable." INDEX { neIndex, f3ErpGroupIndex, f3ErpGroupProtectedFlow } ::= { f3ErpGroupProtectedFlowTable 1 } F3ErpGroupProtectedFlowEntry ::= SEQUENCE { f3ErpGroupProtectedFlow VariablePointer } f3ErpGroupProtectedFlow OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "Pointer to a Flow instance which is protected by an ERP instance. The pointer must be set to cmFlowIndex or cmMPFlowIndex instance." ::= { f3ErpGroupProtectedFlowEntry 1 } -- -- Ethernet Ring Protection Unit -- f3ErpUnitTable OBJECT-TYPE SYNTAX SEQUENCE OF F3ErpUnitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Ring Protection Unit" ::= { f3ErpConfigObjects 3 } f3ErpUnitEntry OBJECT-TYPE SYNTAX F3ErpUnitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3ErpUnitTable." INDEX { neIndex, f3ErpGroupIndex, f3ErpUnitIndex } ::= { f3ErpUnitTable 1 } F3ErpUnitEntry ::= SEQUENCE { f3ErpUnitIndex Integer32, f3ErpUnitPort VariablePointer, f3ErpUnitPortMEP VariablePointer, f3ErpUnitPortRole RPLRole, f3ErpUnitPortStatus RingPortStatus, f3ErpUnitPortRxRapsRequest RAPSRequest, f3ErpUnitPortRxRapsRplBlocked TruthValue, f3ErpUnitPortRxRapsDNF TruthValue, f3ErpUnitPortRxRapsBPR Integer32, f3ErpUnitPortRxRapsNodeId MacAddress, f3ErpUnitPortRapsFp VariablePointer } f3ErpUnitIndex OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify this ERP Unit within ERP Group." ::= { f3ErpUnitEntry 1 } f3ErpUnitPort OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "ERP Unit's points to a facility (port). This object represents the facility Network Element port." ::= { f3ErpUnitEntry 2 } f3ErpUnitPortMEP OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "Pointer to a CFM MEP instance monitoring Ring Port." ::= { f3ErpUnitEntry 3 } f3ErpUnitPortRole OBJECT-TYPE SYNTAX RPLRole MAX-ACCESS read-only STATUS current DESCRIPTION "RPL Role of Ring Port 1. When f3ErpGroupRingPort2Role is NEIGHBOR or OWNER, this value MUST be NONE." ::= { f3ErpUnitEntry 4 } f3ErpUnitPortStatus OBJECT-TYPE SYNTAX RingPortStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Status of Ring Port." ::= { f3ErpUnitEntry 5 } f3ErpUnitPortRxRapsRequest OBJECT-TYPE SYNTAX RAPSRequest MAX-ACCESS read-only STATUS current DESCRIPTION "Request/State field fo the last received R-APS message on Ring Port." ::= { f3ErpUnitEntry 6 } f3ErpUnitPortRxRapsRplBlocked OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "RPL Blocked field fo the last received R-APS message on Ring Port." ::= { f3ErpUnitEntry 7 } f3ErpUnitPortRxRapsDNF OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Do Not Flush field fo the last received R-APS message on Ring Port." ::= { f3ErpUnitEntry 8 } f3ErpUnitPortRxRapsBPR OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "Blocked Port Reference field fo the last received R-APS message on Ring Port." ::= { f3ErpUnitEntry 9 } f3ErpUnitPortRxRapsNodeId OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Node ID of the local system for this ERP instance. The value is used as the Node ID in the RAPS PDU." ::= { f3ErpUnitEntry 10 } f3ErpUnitPortRapsFp OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "Pointer to a R-APS FlowPoint associated with this Ring Port." ::= { f3ErpUnitEntry 11 } -- -- Ethernet Ring Protection Unit Stats -- f3ErpUnitStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF F3ErpUnitStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Ring Protection Unit Statistics" ::= { f3ErpStatsObjects 1 } f3ErpUnitStatsEntry OBJECT-TYPE SYNTAX F3ErpUnitStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3ErpUnitStatsTable." INDEX { neIndex, f3ErpGroupIndex, f3ErpUnitIndex } ::= { f3ErpUnitStatsTable 1 } F3ErpUnitStatsEntry ::= SEQUENCE { f3ErpUnitNumBlockedStateTrans Unsigned32, f3ErpUnitRapsPDUsTx Unsigned32, f3ErpUnitRapsPDUsRx Unsigned32, f3ErpUnitRapsPDUsDiscarded Unsigned32, f3ErpUnitRapsNoReqPDUsTx Unsigned32, f3ErpUnitRapsNoReqRBPDUsTx Unsigned32, f3ErpUnitRapsSignalFailPDUsTx Unsigned32, f3ErpUnitRapsManualSwitchPDUsTx Unsigned32, f3ErpUnitRapsForcedSwitchPDUsTx Unsigned32, f3ErpUnitRapsEventPDUsTx Unsigned32, f3ErpUnitRapsNoReqPDUsRx Unsigned32, f3ErpUnitRapsNoReqRBPDUsRx Unsigned32, f3ErpUnitRapsSignalFailPDUsRx Unsigned32, f3ErpUnitRapsManualSwitchPDUsRx Unsigned32, f3ErpUnitRapsForcedSwitchPDUsRx Unsigned32, f3ErpUnitRapsEventPDUsRx Unsigned32, f3ErpUnitRapsInvalidOamVersionPDUsRx Unsigned32, f3ErpUnitRapsRsvdRequestPDUsRx Unsigned32, f3ErpUnitRapsRsvdEventSubcode Unsigned32 } f3ErpUnitNumBlockedStateTrans OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of transitions into a blocking state for Ring Port." ::= { f3ErpUnitStatsEntry 1 } f3ErpUnitRapsPDUsTx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all RAPS PDUs transmitted on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance." ::= { f3ErpUnitStatsEntry 2 } f3ErpUnitRapsPDUsRx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all RAPS PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance." ::= { f3ErpUnitStatsEntry 3 } f3ErpUnitRapsPDUsDiscarded OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all RAPS PDUs received on the port and discarded where the PDU contains the MEG Level, Ring ID and VID for the ERP instance." ::= { f3ErpUnitStatsEntry 4 } f3ErpUnitRapsNoReqPDUsTx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of No Request RAPS PDUs transmitted on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance." ::= { f3ErpUnitStatsEntry 5 } f3ErpUnitRapsNoReqRBPDUsTx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of No Request, RPL Blocked RAPS PDUs transmitted on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance." ::= { f3ErpUnitStatsEntry 6 } f3ErpUnitRapsSignalFailPDUsTx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Signal Fail RAPS PDUs transmitted on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance." ::= { f3ErpUnitStatsEntry 7 } f3ErpUnitRapsManualSwitchPDUsTx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Manual Switch RAPS PDUs transmitted on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance." ::= { f3ErpUnitStatsEntry 8 } f3ErpUnitRapsForcedSwitchPDUsTx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Forced Switch RAPS PDUs transmitted on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance." ::= { f3ErpUnitStatsEntry 9 } f3ErpUnitRapsEventPDUsTx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Event RAPS PDUs transmitted on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance." ::= { f3ErpUnitStatsEntry 10 } f3ErpUnitRapsNoReqPDUsRx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of No Request RAPS PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance." ::= { f3ErpUnitStatsEntry 11 } f3ErpUnitRapsNoReqRBPDUsRx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of No Request, RPL Blocked RAPS PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance." ::= { f3ErpUnitStatsEntry 12 } f3ErpUnitRapsSignalFailPDUsRx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Signal Fail RAPS PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance." ::= { f3ErpUnitStatsEntry 13 } f3ErpUnitRapsManualSwitchPDUsRx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Manual Switch RAPS PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance." ::= { f3ErpUnitStatsEntry 14 } f3ErpUnitRapsForcedSwitchPDUsRx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Forced Switch RAPS PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance." ::= { f3ErpUnitStatsEntry 15 } f3ErpUnitRapsEventPDUsRx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Event RAPS PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance." ::= { f3ErpUnitStatsEntry 16 } f3ErpUnitRapsInvalidOamVersionPDUsRx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of OAM PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance and an OAM Version field other than 0 or 1." ::= { f3ErpUnitStatsEntry 17 } f3ErpUnitRapsRsvdRequestPDUsRx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of OAM PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance." ::= { f3ErpUnitStatsEntry 18 } f3ErpUnitRapsRsvdEventSubcode OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of OAM PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance, an OAM Opcode field of 40 (R-APS), a request/state value of 14 (EVT) and a sub-code value that is not 0." ::= { f3ErpUnitStatsEntry 19 } -- -- Conformance -- f3ErpCompliances OBJECT IDENTIFIER ::= {f3ErpConformance 1} f3ErpGroups OBJECT IDENTIFIER ::= {f3ErpConformance 2} f3ErpCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Describes the requirements for conformance to the F3-ERP-MIB compilance." MODULE -- this module MANDATORY-GROUPS { f3ErpGroupGroup, f3ErpUnitGroup, f3ErpUnitStatsGroup } ::= { f3ErpCompliances 1 } f3ErpGroupGroup OBJECT-GROUP OBJECTS { f3ErpGroupAdminState, f3ErpGroupOperationalState, f3ErpGroupSecondaryState, f3ErpGroupRapsRingId, f3ErpGroupRapsNodeId, f3ErpGroupRapsVlanId, f3ErpGroupRapsVlanPrio, f3ErpGroupRapsVlanEtherType, f3ErpGroupRapsMdLevel, f3ErpGroupCompatibleVersion, f3ErpGroupRevertive, f3ErpGroupSubRingWithoutVirtChan, f3ErpGroupGuardTime, f3ErpGroupWaitToRestore, f3ErpGroupHoldOffTime, f3ErpGroupRingPort0, f3ErpGroupRingPort0MEP, f3ErpGroupRingPort0Role, f3ErpGroupRingPort1, f3ErpGroupRingPort1MEP, f3ErpGroupRingPort1Role, f3ErpGroupProtectMgmtTunnel, f3ErpGroupNodeState, f3ErpGroupWTRRemainingTime, f3ErpGroupTxRapsRequest, f3ErpGroupTxRapsRplBlocked, f3ErpGroupTxRapsDNF, f3ErpGroupTxRapsBPR, f3ErpGroupAction, f3ErpGroupActionObject, f3ErpGroupUserLabel, f3ErpGroupStorageType, f3ErpGroupRowStatus, f3ErpGroupProtectedFlow, f3ErpGroupInterconnectionErp, f3ErpGroupInterconnectPropagateTc, f3ErpGroupRapsVirtualChannelMep, f3ErpGroupMaxFpNum, f3ErpGroupRapsInterconnectionNode, f3ErpGroupRapsMultipleFailure } STATUS current DESCRIPTION "A collection of objects used to manage the ERP Group." ::= { f3ErpGroups 1 } f3ErpUnitGroup OBJECT-GROUP OBJECTS { f3ErpUnitPort, f3ErpUnitPortMEP, f3ErpUnitPortRole, f3ErpUnitPortStatus, f3ErpUnitPortRxRapsRequest, f3ErpUnitPortRxRapsRplBlocked, f3ErpUnitPortRxRapsDNF, f3ErpUnitPortRxRapsBPR, f3ErpUnitPortRxRapsNodeId, f3ErpUnitPortRapsFp } STATUS current DESCRIPTION "A collection of objects used to manage the ERP Unit." ::= { f3ErpGroups 2 } f3ErpUnitStatsGroup OBJECT-GROUP OBJECTS { f3ErpUnitNumBlockedStateTrans, f3ErpUnitRapsPDUsTx, f3ErpUnitRapsPDUsRx, f3ErpUnitRapsPDUsDiscarded, f3ErpUnitRapsNoReqPDUsTx, f3ErpUnitRapsNoReqRBPDUsTx, f3ErpUnitRapsSignalFailPDUsTx, f3ErpUnitRapsManualSwitchPDUsTx, f3ErpUnitRapsForcedSwitchPDUsTx, f3ErpUnitRapsEventPDUsTx, f3ErpUnitRapsNoReqPDUsRx, f3ErpUnitRapsNoReqRBPDUsRx, f3ErpUnitRapsSignalFailPDUsRx, f3ErpUnitRapsManualSwitchPDUsRx, f3ErpUnitRapsForcedSwitchPDUsRx, f3ErpUnitRapsEventPDUsRx, f3ErpUnitRapsInvalidOamVersionPDUsRx, f3ErpUnitRapsRsvdRequestPDUsRx, f3ErpUnitRapsRsvdEventSubcode } STATUS current DESCRIPTION "A collection of objects used to manage the ERP Unit Statistics." ::= { f3ErpGroups 3 } END