F3-L3-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, IpAddress, Counter64 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF DateAndTime, DisplayString, TruthValue, RowStatus, StorageType, MacAddress, VariablePointer, TEXTUAL-CONVENTION FROM SNMPv2-TC Ipv6Address FROM IPV6-TC InterfaceIndex, ifIndex FROM IF-MIB PhysicalIndex FROM ENTITY-MIB fsp150cm FROM ADVA-MIB AdminState, OperationalState, SecondaryState, VlanId, VlanPriority, F3DisplayString, IpVersion, TrafficDirection, CmPmIntervalType, CmPmBinAction, PerfCounter64, FlowSecState FROM CM-COMMON-MIB CmDhcpRole, DHCPHostNameType, DHCPCIDType, IpEntryType, IpMode FROM CM-IP-MIB neIndex, shelfIndex, slotIndex FROM CM-ENTITY-MIB PolicerAlgorithmType, PolicerColorMode, AclNoMatchDispositionType, ShapingType FROM CM-FACILITY-MIB; f3L3MIB MODULE-IDENTITY LAST-UPDATED "201810250000Z" ORGANIZATION "ADVA Optical Networking SE" CONTACT-INFO "Web URL: http://adva.com/ E-mail: support@adva.com Postal: ADVA Optical Networking SE Campus Martinsried Fraunhoferstrasse 9a 82152 Martinsried/Munich Germany Phone: +49 089 89 06 65 0 Fax: +49 089 89 06 65 199 " DESCRIPTION "This module defines the L3 MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA." REVISION "201810250000Z" DESCRIPTION " Notes from release 201908010000Z (1) Added new objects to f3L3TrafficIPInterfaceTable: f3L3TrafficIPIfMtu Notes from release 201810250000Z (1) Added new objects to cmL3FlowPointTable: cmL3FlowPointEgressShapingType Notes from release 201810240000Z (1) Added new objects to cmL3FlowPointTable: cmL3FlowPointWfqSegmentationCOS cmL3FlowPointWfqGroupCOS cmL3FlowPointWfqGroupEirLo cmL3FlowPointWfqGroupEirHi (2) Added new object to cmL3QosShaperTable: cmL3QosShaperWfqWeight Notes from release 201809060000Z (1) Added new table: f3L3TrafficIpv4AllRouteTable (2) Deprecated table: f3L3TrafficIpv4RouteTable Notes from release 201808010000Z (1) Added new attribute: f3L3TrafficBgpPeerLocalPreference f3L3TrafficBgpPeerRouteReflectorClient f3L3TrafficBgpPeerRouteReflectorClusterId Notes from release 201807130000Z (1) Added new attribute: f3VrfOspfRouterVersion Notes from release 201807130000Z (1) Depreceted attribute: f3L3TrafficOspfNeighborInterface (2) Added new attribute: f3L3TrafficOspfNeighborLocalInterfaceName Notes from release 201807120000Z (1) Depreceted attributes: f3L3TrafficBgpRouterConnectedRoutesRedistControl f3L3TrafficBgpRouterOspfRoutesRedistControl f3L3TrafficBgpRouterStaticRoutesRedistControl f3L3TrafficBgpRouterDhcpRoutesRedistControl Notes from release 201806260000Z (1) Added new table: f3L3TrafficBgpPeerAddressFamilyTable Notes from release 201806200000Z (1) Renamed OspfRole to TrafficOspfRole. (2) Renamed OspfAreaType to TrafficOspfAreaType. Notes from release 201802020000Z (1) Added new tables: f3L3TrafficBgpRouterTable, f3L3TrafficBgpRouteTable, f3L3TrafficBgpPeerTable, f3VrfOspfRouterTable, f3L3TrafficOspfAreaTable, f3L3TrafficOspfAreaIfMemberTable, f3VrfLoopbackInterfaceTable, f3L3TrafficOspfAsLsDbTable, f3L3TrafficOspfLsDbTable, f3L3TrafficOspfNeighborTable, f3L3TrafficIPInterfaceOspfTable, f3L3TrafficIPv6InterfaceTable, f3L3TrafficIPv6AddressTable, f3L3TrafficIPv6PrefixTable, f3L3TrafficIPv6NdpTable, f3L3TrafficIpv6RouteTable, f3DhcpV6RelayAgentTable, f3DhcpV6RelayAgentClientTrafficIpIfMemberTable (2) Deprecated f3VrfAction, added f3VrfActionX (3) Deprecated f3L3TrafficIpv4RouteStatus, added f3L3TrafficIpv4RouteStatusX (4) Deprecated f3L3TrafficIPIfAction, added f3L3TrafficIPIfActionX Notes from release 201712140000Z 1) added cmL3FlowPointThresholdCrossingAlert, cmL3QosPolicerThresholdCrossingAlert, cmL3QosShaperThresholdCrossingAlert 2) changed the range of f3L3TrafficIpInterfaceHistoryIndex from 1..4 to 1..65535 3) changed the range of f3L3AclRuleHistoryIndex from 1..4 to 1..65535 4) changed the range of cmL3FlowPointHistoryIndex from 1..4 to 1..65535 Notes from release 201711300000Z a) added cmL3FlowPointAclNoMatchDisposition to CML3FlowPointEntry Notes from release 201711270000Z a) added cmL3FlowPointStatsAclDropNoMatch to CML3FlowPointStatsEntry b) added cmL3FlowPointHistoryAclDropNoMatch to CML3FlowPointHistoryEntry Notes from release 201711130000Z a) added f3VrfActionIfName to f3VrfTable b) moved the action flushArpCache from TrafficIpInterfaceActionType to VrfActionType Notes from release 201711050000Z a) marked f3VrfAccIsolationControlEnabled obsolete b) added VrfActionType and deprecated VrfAction c) deprecaed f3VrfAction and added f3VrfActionX d) deprecated TrafficIpRouteStatus and added TrafficIpRouteStatusType e) deprecated AffectiveArpActionType and added TrafficIpInterfaceActionType f) mark f3L3TrafficIpv4RouteFlags obsolete g) deprecated f3L3TrafficIpv4RouteStatus and added f3L3TrafficIpv4RouteStatusX h) deprecated f3L3TrafficIPIfAction and added f3L3TrafficIPIfActionX Notes from release 201709200000Z a) change f3L3TrafficIPIfDhcpEnabled to read-write Notes from release 201709150000Z a) moved PointPolicingEnabled attribute from cmL3FlowPointTable to cmL3QosPolicerTable Notes from release 201708150000Z a) added the following tables to suport xgpro NIDs cmL3FlowPointTable cmL3QosPolicerTable cmL3QosShaperTable cmL3FlowPointStatsTable cmL3FlowPointHistoryTable cmL3FlowPointThresholdTable cmL3QosPolicerStatsTable cmL3QosPolicerHistoryTable cmL3QosPolicerThresholdTable cmL3QosShaperStatsTable cmL3QosShaperHistoryTable cmL3QosShaperThresholdTable Notes from release 201703220000Z (1) New f3L3AclRuleTable column: - f3L3AclRuleActive Notes from release 201409120000Z" ::= {fsp150cm 37} -- -- OID definitions -- f3L3Objects OBJECT IDENTIFIER ::= {f3L3MIB 1} f3L3Performance OBJECT IDENTIFIER ::= {f3L3MIB 2} f3L3Notifications OBJECT IDENTIFIER ::= {f3L3MIB 3} f3L3Conformance OBJECT IDENTIFIER ::= {f3L3MIB 4} cmL3Notifications OBJECT IDENTIFIER ::= {f3L3MIB 5} -- -- Textual Conventions -- BgpGracefulRestartControlType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "." SYNTAX INTEGER { notApplicable (0), enable (1), disable (2), helperOnly (3) } EcmpDistributionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "." SYNTAX INTEGER { notApplicable (0), l3 (1), l4 (2) } BgpUpdateSourceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type to update source IP." SYNTAX INTEGER { notApplicable (0), none (1), ipv4Address (2), ipv6Address (3), interfaceName (4) } BgpRouteFilterDirection ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Config parameters related to inbound or outbound route filter." SYNTAX INTEGER { notApplicable (0), in (1), out (2) } IpPrefixDispositionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "IP Prefix Disposition Type." SYNTAX INTEGER { notApplicable (0), permit (1), deny (2) } BgpRouterActionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the action on BGP Router." SYNTAX INTEGER { notApplicable (0), optimizeBgpRouteRetrieve (1), optimizeBgpInRouteRetrieve (2) } OspfRouterActionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the action on OSPF Router." SYNTAX INTEGER { notApplicable (0), optimizeOspfAsLsDbRetrieve (1), optimizeOspfLsDbRetrieve (2), optimizeOspfNeighborRetrieve (3), optimizeOspfLinkLsDbRetrieve (4) } Ipv6AddressAssignMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes IPv6 address assignment mode." SYNTAX INTEGER { notApplicable (0), manual (1), automatic (2), external (3) } TrafficIpRouteOriginType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The origin type of IP Route. bgp (1) -- From BGP. ospf (2) -- From OSPF. connected (3) -- Connected Route. static (4) -- Configured. dhcp (5) -- From DHCP Relay. slaac (6) -- From SLACC. dhcp-relay (7) -- From DHCP. isis (8) -- From ISIS. ti-lfa (9) -- From TI-LFA. " SYNTAX INTEGER { notApplicable (0), bgp (1), ospf (2), connected (3), static (4), dhcp (5), slaac (6), dhcp-relay (7), isis (8), ti-lfa (9) } NdpNeighborReachabilityState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Reachability state of NDP entry." SYNTAX INTEGER { notApplicable (0), incomplete (1), reachable (2), stale (3), delay (4), probe (5) } NdpRaDefaultRouterPreference ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes Router preference." SYNTAX INTEGER { notApplicable (0), none (1), high (2), medium (3), low (4) } Ipv6LinkLocalAddressMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "IPv6 address shall be first 64 bits as configured in IPv6 unicast address auto generation prefix followed by Interface ID." SYNTAX INTEGER { notApplicable (0), automatic (1), manual (2) } IpInterfaceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes IPv6 interface type." SYNTAX INTEGER { notApplicable (0), host (1), router (2) } OspfAuthType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This attribute is used to specify authentication type. Simple: 64-bits clear password inserted into OSPF packets header. None: No authentication is used. Cryptographic: a shared secret which enables the generation/verification of message digests which are appended to the OSPF protocol packets. none (1) -- No authentication. simple (2) -- 64-bits clear password inserted into OSPF packets header. cryptoGraphic (3) -- A shared secret which enables the generation/verification of message digests which are appended to the OSPF protocol packets. System level authentication key is used." SYNTAX INTEGER { notApplicable (0), none (1), simple (2), cryptoGraphic (3) } OspfInterfaceState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The OSPF state of interface. down (1) -- In this state, the lower-level protocols have indicated that the interface is unusable. loopback (2) -- The interface is looped back and unavailable for regular data traffic. waiting (3), -- In this state, the router is trying to determine the identity of the (Backup) Designated Router for the network. To do this, the router monitors the Hello Packets it receives. The router is not allowed to elect a Backup Designated Router nor a Designated Router until it transitions out of Waiting state. This prevents unnecessary changes of (Backup) Designated Router. pointToPoint (4), -- In this state, the interface is operational, and connects either to a physical point-to-point network or to a virtual link. Upon entering this state, the router attempts to form an adjacency with the neighboring router. Hello Packets are sent to the neighbor every HelloInterval seconds. drOther (5), -- The interface is to a broadcast or NBMA network on which another router has been selected to be the Designated Router. In this state, the router itself has not been selected Backup Designated Router either. The router forms adjacencies to both the Designated Router and the Backup Designated Router (if they exist). dr (6), -- In this state, this router itself is the Designated Router on the attached network. backup (7) -- In this state, the router itself is the Backup Designated Router on the attached network." SYNTAX INTEGER { notApplicable (0), down (1), loopback (2), waiting (3), pointToPoint (4), drOther (5), dr (6), backup (7) } OspfIfType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The network type connected by interface. broadcast (1) -- Broadcast. pointToPoint (2) -- Point to Point." SYNTAX INTEGER { notApplicable (0), broadcast (1), pointToPoint (2), loopback (3) } TrafficOspfRole ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The role of router. dr (1) -- Designated Router. bdr (2) -- Backup DR. drother (3) -- DR Other. pointToPoint(4) -- Point to point" SYNTAX INTEGER { notApplicable (0), dr (1), bdr (2), drother (3), pointToPoint (4) } OspfAdjacencyState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "OSPF Interface Adjacency State. down (1) -- Neighbor down state. attempt (2) -- Neighbor attempt state. init (3) -- Neighbor init state. twoWay (4) -- Neighbor 2-Way state. exStart (5) -- Neighbor exchange start state. exchange (6) -- Neighbor exchange state. loading (7) -- Neighbor loading state. full (8) -- Neighbor full state." SYNTAX INTEGER { notApplicable (0), down (1), attempt (2), init (3), twoWay (4), exStart (5), exchange (6), loading (7), full (8) } OspfAsLsaType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Type of LSA from external AS. asExternal (1) -- Autonomous system external LSA. asOpaque (2) -- OSPF AS (Autonomous System) Scope Opaque LSA." SYNTAX INTEGER { notApplicable (0), asExternal (1), asOpaque (2) } OspfLsaType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Type of LSA from external AS. router (1) -- Router LSA: The Router LSA is generated by each router for each area it is located. In the link-state ID you will find the originating router's ID. network (2) -- Network LSA: Network LSAs are generated by the DR. The link-state ID will be the router ID of the DR. summary (3) -- Summary LSA: The summary LSA is created by the ABR and flooded into other areas. asExternal (4) -- External LSA: Also known as autonomous system external LSA, the external LSAs are generated by the ASBR. areaOpaque (5) -- Packets are used to flood OSPF information through other area routers even if these routers do not process this information in order to extend OSPF functionality, this LSA is used for traffic engineering to advertise MPLS and other protocols." SYNTAX INTEGER { notApplicable (0), router (1), network (2), summary (3), asExternal (4), areaOpaque (5), summaryNet (6), summaryAsbr (7), multicast (8), nssaExternal (9), interAreaPrefix (10), interAreaRouter (11), link (12), intraAreaPrefix (13) } RoutesMetricType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Metric Type for routes exported from external autonomous system. e1 (1) -- Type 1 external metrics are equivalent to the link-state metric, where the cost is equal to the sum of the internal costs plus the external cost. This means that Type 1 external metrics include the external cost to the destination as well as the cost (metric) to reach the AS boundary router. e2 (2) -- Type 2 external metrics are greater than the cost of any path internal to the AS. Type 2 external metrics use only the external cost to the destination and ignore the cost (metric) to reach the AS boundary router." SYNTAX INTEGER { notApplicable (0), e1 (1), e2 (2) } TrafficOspfAreaType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Area Type." SYNTAX INTEGER { notApplicable (0), stub (1), normal (2) } BgpSessionStateType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Operational state of the BGP peer. idle (1) -- Neighbor is down, and in the Idle state of the FSM. connect (2) -- Neighbor is down, and the session is waiting for the underlying transport session to be established. active (3) -- Neighbor is down, and the local system is awaiting a conncetion from the remote peer. openSent (4) -- Neighbor is in the process of being established. The local system has sent an OPEN message. openConfirm (5) -- Neighbor is in the process of being established. The local system is awaiting a NOTIFICATION or KEEPALIVE message. established (6) -- Neighbor is up - the BGP session with the peer is established." SYNTAX INTEGER { notApplicable (0), idle (1), connect (2), active (3), openSent (4), openConfirm (5), established (6) } BgpNextHopUpdateType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "." SYNTAX INTEGER { notApplicable (0), default (1), self (2), ipv4 (3), ipv6 (4) } BgpPeerAddressFamilyNameType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "." SYNTAX INTEGER { notApplicable (0), ipv4-unicast (1), ipv6-unicast (2) } OspfVersion ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes version of a Ospf Router." SYNTAX INTEGER { notApplicable (0), ospfv2 (1), ospfv3 (2) } -- -- DEPRECATED -- VrfAction ::= TEXTUAL-CONVENTION STATUS deprecated DESCRIPTION "Describes the action on Vrf." SYNTAX INTEGER { notApplicable (0), ping (1), fluchARPCache(2), traceRoute(3), retrieveEffectiveRoutes(4) } -- -- replaces VrfAction -- VrfActionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the action on Vrf." SYNTAX INTEGER { notApplicable (0), ping (1), traceRoute(2), optimizeRouteRetrieve(3), flushArpCache (4), pingV6(5), traceRouteV6(6), optimizeIpv6RouteRetrieve(7), flushNDP (8), optimizeBfdSessionRetrieve(9) } IfIpAddressSourceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the Ip Interface adress source type." SYNTAX INTEGER { dhcp (1), static(2) } DhcpRelayInterfaceSide ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the DHCP relay interface side." SYNTAX INTEGER { client (1), server(2) } L3AclRuleOperation ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the acl rule operation." SYNTAX INTEGER { notApplicable (0), accept (1), deny (2) } AclRuleL2Side ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the acl rule l2 side." SYNTAX INTEGER { access(1), network(2) } -- -- DEPRECATED -- TrafficIpRouteStatus ::= TEXTUAL-CONVENTION STATUS deprecated DESCRIPTION "Describes the traffci ipv4 route status." SYNTAX INTEGER { active(1), nexthopUnresovled(2), interfaceOutage(3), noResources(4), standby(5), bfdSessDown(6) } RouteFlags ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the traffci ipv4 route flags." SYNTAX BITS { dDynamic(0), gUseGW(1), hFullMask(2), mModifiedByIcmp(3), oOutage(4), uNormal(5) } -- -- replaces TrafficIpRouteStatus -- TrafficIpRouteStatusType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the traffci ipv4 route status." SYNTAX INTEGER { active(1), nexthopUnresolved(2), interfaceOutage(3), noResources(4), standby(5), bfdSessDown(6) } -- -- DEPRECATED -- AffectiveArpActionType ::= TEXTUAL-CONVENTION STATUS deprecated DESCRIPTION "Describes the retrieve effective arp action." SYNTAX INTEGER { notApplicable (0), retrieveAffectiveArp (1) } -- -- replaces AffectiveArpActionType -- TrafficIpInterfaceActionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes interface action." SYNTAX INTEGER { notApplicable (0), optimizeArpRetrieve (1), optimizeNdpRetrieve (2), optimizeIPv6AddressEntryRetrieve (3) } TrafficIpv6InterfaceActionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes interface action." SYNTAX INTEGER { notApplicable (0), optimizeNdpRetrieve (1), optimizeIPv6AddressEntryRetrieve (2) } SrSidType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "SID Type." SYNTAX INTEGER { index (1), label (2), sid (3) } VrfTransportType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Transport Type." SYNTAX INTEGER { ip (1), sr (2) } TilfaProtectionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TI-LFA Protection Type." SYNTAX INTEGER { link-protection (1), node-protection (2) } -- -- DHCP Relay Agent Table -- f3DhcpRelayAgentTable OBJECT-TYPE SYNTAX SEQUENCE OF F3DhcpRelayAgentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the Dhcp Relay Agent." ::= { f3L3Objects 1 } f3DhcpRelayAgentEntry OBJECT-TYPE SYNTAX F3DhcpRelayAgentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3DhcpRelayAgentTable." INDEX { neIndex, f3DhcpRelayAgentIndex } ::= { f3DhcpRelayAgentTable 1 } F3DhcpRelayAgentEntry ::= SEQUENCE { f3DhcpRelayAgentIndex Integer32, f3DhcpRelayAgentAlias F3DisplayString, f3DhcpRelayAgentAdminState AdminState, f3DhcpRelayAgentSecondaryState SecondaryState, f3DhcpRelayAgentOperationalState OperationalState, f3DhcpRelayAgentIpVersion IpVersion, f3DhcpRelayAgentServerIpAddress IpAddress, f3DhcpRelayAgentOp82SubOp9ControlEnabled TruthValue, f3DhcpRelayAgentOp82SubOp9Value DisplayString, f3DhcpRelayAgentStorageType StorageType, f3DhcpRelayAgentRowStatus RowStatus } f3DhcpRelayAgentIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the DHCP relay agent entry." ::= { f3DhcpRelayAgentEntry 1 } f3DhcpRelayAgentAlias OBJECT-TYPE SYNTAX F3DisplayString (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The DHCP relay agent alias." ::= { f3DhcpRelayAgentEntry 2 } f3DhcpRelayAgentAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "The admin state of this DCHP relay agent." ::= { f3DhcpRelayAgentEntry 3 } f3DhcpRelayAgentSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "The secondary state of this DCHP relay agent." ::= { f3DhcpRelayAgentEntry 4 } f3DhcpRelayAgentOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "The operational state of this DCHP relay agent." ::= { f3DhcpRelayAgentEntry 5 } f3DhcpRelayAgentIpVersion OBJECT-TYPE SYNTAX IpVersion MAX-ACCESS read-write STATUS current DESCRIPTION "The Ip version of this DCHP relay agent." ::= { f3DhcpRelayAgentEntry 6 } f3DhcpRelayAgentServerIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Ipv4 address of this DCHP relay agent." ::= { f3DhcpRelayAgentEntry 7 } f3DhcpRelayAgentOp82SubOp9ControlEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the suboption9 of the option82 whether enabled." ::= { f3DhcpRelayAgentEntry 8 } f3DhcpRelayAgentOp82SubOp9Value OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the vendor string if the suboption9 enabled." ::= { f3DhcpRelayAgentEntry 9 } f3DhcpRelayAgentStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3DhcpRelayAgentEntry 10 } f3DhcpRelayAgentRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3DhcpRelayAgentRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3DhcpRelayAgentRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The f3DhcpRelayAgentRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3DhcpRelayAgentEntry 11 } -- -- VRF Table -- f3VrfTable OBJECT-TYPE SYNTAX SEQUENCE OF F3VrfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the VRF user." ::= { f3L3Objects 2 } f3VrfEntry OBJECT-TYPE SYNTAX F3VrfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3VrfTable." INDEX { neIndex, f3VrfIndex } ::= { f3VrfTable 1 } F3VrfEntry ::= SEQUENCE { f3VrfIndex Integer32, f3VrfAlias F3DisplayString, f3VrfAdminState AdminState, f3VrfSecondaryState SecondaryState, f3VrfOperationalState OperationalState, f3VrfAccIsolationControlEnabled TruthValue, f3VrfPingIpv4Destination IpAddress, f3VrfTraceRouteIpv4Destination IpAddress, f3VrfAction VrfAction, f3VrfPingResult F3DisplayString, f3VrfTraceRouteResult F3DisplayString, f3VrfStorageType StorageType, f3VrfRowStatus RowStatus, f3VrfDhcpRoutesControl TruthValue, f3VrfActionX VrfActionType, f3VrfActionIfName DisplayString, f3VrfIpVersion IpVersion, f3VrfPingIpv6Destination Ipv6Address, f3VrfTraceRouteIpv6Destination Ipv6Address, f3VrfMaxFwdTableEntries Integer32, f3VrfFwdTableFull TruthValue, f3VrfEcmpDistribution EcmpDistributionType, f3VrfEcmpStaticRoutesMaximumPaths Unsigned32, f3VrfTransportType VrfTransportType } f3VrfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vrf number." ::= { f3VrfEntry 1 } f3VrfAlias OBJECT-TYPE SYNTAX F3DisplayString (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the vrf alias." ::= { f3VrfEntry 2 } f3VrfAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the vrf admin state." ::= { f3VrfEntry 3 } f3VrfSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the vrf secondary state." ::= { f3VrfEntry 4 } f3VrfOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the vrf operational state." ::= { f3VrfEntry 5 } f3VrfAccIsolationControlEnabled OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This object is used to control traffic between L3 flowpoint on Acc port." ::= { f3VrfEntry 6 } f3VrfPingIpv4Destination OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to specify the IP Address to which ICMP Ping will be initiated." ::= { f3VrfEntry 7 } f3VrfTraceRouteIpv4Destination OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to specify the IP Address to which Trace Route will be initiated." ::= { f3VrfEntry 8 } f3VrfAction OBJECT-TYPE SYNTAX VrfAction MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The Vrf action, includes fluch ARP cache, ping, trace route. DEPRECATED and new variable to use is f3VrfActionX." ::= { f3VrfEntry 9 } f3VrfPingResult OBJECT-TYPE SYNTAX F3DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Ping action result." ::= { f3VrfEntry 10 } f3VrfTraceRouteResult OBJECT-TYPE SYNTAX F3DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The trace route action result." ::= { f3VrfEntry 11 } f3VrfStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3VrfEntry 12 } f3VrfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3VrfRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3VrfRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The f3VrfRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3VrfEntry 13 } f3VrfDhcpRoutesControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to control dynamic routes creation based on DHCP relay agent operation. if it is disabled, the vrf should not use host ip addresses assigned by means of DHCP relay agent for the dynamic routes creation." ::= { f3VrfEntry 14 } f3VrfActionX OBJECT-TYPE SYNTAX VrfActionType MAX-ACCESS read-write STATUS current DESCRIPTION "The Vrf action, includes ping, trace route and route retrieve" ::= { f3VrfEntry 15 } f3VrfActionIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Interface Name parameter for the VRF action. For example, to flush ARP cache for a particular interface this variable shall be set and then f3VrfActionX shall be set to flushArpCache." ::= { f3VrfEntry 16 } f3VrfIpVersion OBJECT-TYPE SYNTAX IpVersion MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes the vrf Ip version." ::= { f3VrfEntry 17 } f3VrfPingIpv6Destination OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to specify the IP Address to which ICMP Ping will be initiated." ::= { f3VrfEntry 18 } f3VrfTraceRouteIpv6Destination OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user to specify the IP Address to which Trace Route will be initiated." ::= { f3VrfEntry 19 } f3VrfMaxFwdTableEntries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the maximum forwarding table entries that can be used by the vrf" ::= { f3VrfEntry 20 } f3VrfFwdTableFull OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This is a status variable that indicates if the forwarding table for the vrf is full" ::= { f3VrfEntry 21 } f3VrfEcmpDistribution OBJECT-TYPE SYNTAX EcmpDistributionType MAX-ACCESS read-write STATUS current DESCRIPTION "The fields in IP Packets used in hash lookup." ::= { f3VrfEntry 22 } f3VrfEcmpStaticRoutesMaximumPaths OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of path used in ECMP for static routes." ::= { f3VrfEntry 23 } f3VrfTransportType OBJECT-TYPE SYNTAX VrfTransportType MAX-ACCESS read-create STATUS current DESCRIPTION "The transport type of this entry." ::= { f3VrfEntry 24 } -- -- L3 flowpoint Table -- f3L3FlowPointTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3FlowPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the L3 flowpoint." ::= { f3L3Objects 3 } f3L3FlowPointEntry OBJECT-TYPE SYNTAX F3L3FlowPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3FlowPointTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex } ::= { f3L3FlowPointTable 1 } F3L3FlowPointEntry ::= SEQUENCE { f3L3FlowPointPortTypeIndex Integer32, f3L3FlowPointPortIndex Integer32, f3L3FlowPointIndex Integer32, f3L3FlowPointAlias F3DisplayString, f3L3FlowPointAdminState AdminState, f3L3FlowPointSecondaryState SecondaryState, f3L3FlowPointOperationalState OperationalState, f3L3FlowPointMultiCOSEnabled TruthValue, f3L3FlowPointCOS Integer32, f3L3FlowPointUntaggedMemberShipEnabled TruthValue, f3L3FlowPointOuterTagMemberShipEnabled TruthValue, f3L3FlowPointOuterTagMemberShipVlanId VlanId, f3L3FlowPointInnerTagMemberShipEnabled TruthValue, f3L3FlowPointInnerTagMemberShipVlanId VlanId, f3L3FlowPointFragmentedPktsFwdEnabled TruthValue, f3L3FlowPointHCosMgmtEnabled TruthValue, f3L3FlowPointHCosGuaranteedBwHi Unsigned32, f3L3FlowPointHCosGuaranteedBwLo Unsigned32, f3L3FlowPointHCosMaximumBwHi Unsigned32, f3L3FlowPointHCosMaximumBwLo Unsigned32, f3L3FlowPointPolicingEnabled TruthValue, f3L3FlowPointStorageType StorageType, f3L3FlowPointRowStatus RowStatus, f3L3FlowPointDscpOverwriteControl TruthValue, f3L3FlowPointPriMapProfile VariablePointer, f3L3FlowPointRefConnectGuardFlow VariablePointer, f3L3FlowPointSecureState FlowSecState, f3L3FlowPointSecureBlockingEnabled TruthValue, f3L3FlowPointWfqSegmentationCOS Integer32, f3L3FlowPointWfqGroupCOS Integer32, f3L3FlowPointWfqGroupEirLo Unsigned32, f3L3FlowPointWfqGroupEirHi Unsigned32, f3L3FlowPointOuterVlanEthertype Integer32, f3L3FlowPointInnerVlanEthertype Integer32, f3L3FlowPointIpVersion IpVersion } f3L3FlowPointPortTypeIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "It specifies the port type, value 1 means Network Port, value 2 means Access Port, value 3 means Mobile Traffic Port." ::= { f3L3FlowPointEntry 1 } f3L3FlowPointPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port number value." ::= { f3L3FlowPointEntry 2 } f3L3FlowPointIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The L3 flow point number." ::= { f3L3FlowPointEntry 3 } f3L3FlowPointAlias OBJECT-TYPE SYNTAX F3DisplayString (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the L3 flow point alias." ::= { f3L3FlowPointEntry 4 } f3L3FlowPointAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the L3 flow point admin state." ::= { f3L3FlowPointEntry 5 } f3L3FlowPointSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the L3 flow point secondary state." ::= { f3L3FlowPointEntry 6 } f3L3FlowPointOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the L3 flow point operational state." ::= { f3L3FlowPointEntry 7 } f3L3FlowPointMultiCOSEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Control to enable or disable per-COS BWPs on a FlowPoint. ENABLED:per-COS BWPs (CIR, EIR, CBS, EBS, CM, CF) are applied as a policing function for all ingress frames of this flowpoint. DISABLED:per-Flow BWP (CIR, EIR, CBS, EBS, CM, CF) is applied as a policing function for all ingress frames of this flowpoint. User must independently enable each COS BWP when ENABLED." ::= { f3L3FlowPointEntry 8 } f3L3FlowPointCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies the internal COS applied to all ingress frames of the flowpoint." ::= { f3L3FlowPointEntry 9 } f3L3FlowPointUntaggedMemberShipEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls untagged frames membership for the Flowpoint. ENABLED: Ingress untagged frame matches Flowpoint membership. DISABLED: Ingress untagged frame does not match Flowpoint membership." ::= { f3L3FlowPointEntry 10 } f3L3FlowPointOuterTagMemberShipEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls outer tag membership for the Flowpoint whether enabled." ::= { f3L3FlowPointEntry 11 } f3L3FlowPointOuterTagMemberShipVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls outer tag VlanId membership for the Flowpoint." ::= { f3L3FlowPointEntry 12 } f3L3FlowPointInnerTagMemberShipEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls inner tag membership for the Flowpoint whether enabled." ::= { f3L3FlowPointEntry 13 } f3L3FlowPointInnerTagMemberShipVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls inner tag VlanId membership for the Flowpoint." ::= { f3L3FlowPointEntry 14 } f3L3FlowPointFragmentedPktsFwdEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies whether received IP Packets with More Fragments flag should be forwarded by the FlowPoint." ::= { f3L3FlowPointEntry 15 } f3L3FlowPointHCosMgmtEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies whether the Hierarchical COS shaping enabled for this flow point." ::= { f3L3FlowPointEntry 16 } f3L3FlowPointHCosGuaranteedBwHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the Hierarchical COS guarranteed bandwidth high 32 bits for this flow point." ::= { f3L3FlowPointEntry 17 } f3L3FlowPointHCosGuaranteedBwLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the Hierarchical COS guarranteed bandwidth low 32 bits for this flow point." ::= { f3L3FlowPointEntry 18 } f3L3FlowPointHCosMaximumBwHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the Hierarchical COS maximum bandwidth high 32 bits for this flow point." ::= { f3L3FlowPointEntry 19 } f3L3FlowPointHCosMaximumBwLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the Hierarchical COS maximum bandwidth low 32 bits for this flow point." ::= { f3L3FlowPointEntry 20 } f3L3FlowPointPolicingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute allows enable or disable policers of the flow point." ::= { f3L3FlowPointEntry 21 } f3L3FlowPointStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3L3FlowPointEntry 22 } f3L3FlowPointRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3FlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3FlowPointRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The f3L3FlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3FlowPointEntry 23 } f3L3FlowPointDscpOverwriteControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute allows enable dscp value overwrite." ::= { f3L3FlowPointEntry 24 } f3L3FlowPointPriMapProfile OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute allows specify the priority map profile." ::= { f3L3FlowPointEntry 25 } f3L3FlowPointRefConnectGuardFlow OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies Mac Sec flow object OID." ::= { f3L3FlowPointEntry 26 } f3L3FlowPointSecureState OBJECT-TYPE SYNTAX FlowSecState MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the secure state of this flow." ::= { f3L3FlowPointEntry 27 } f3L3FlowPointSecureBlockingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object can be used to enable/disable secure block." ::= { f3L3FlowPointEntry 28 } f3L3FlowPointWfqSegmentationCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object used to specify wfq segmentation COS value." ::= { f3L3FlowPointEntry 29 } f3L3FlowPointWfqGroupCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object used to specify wfq group COS value." ::= { f3L3FlowPointEntry 30 } f3L3FlowPointWfqGroupEirLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object used to specify wfq group EIR low 32 bits value." ::= { f3L3FlowPointEntry 31 } f3L3FlowPointWfqGroupEirHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object used to specify wfq group EIR high 32 bits value." ::= { f3L3FlowPointEntry 32 } f3L3FlowPointOuterVlanEthertype OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "." ::= { f3L3FlowPointEntry 33 } f3L3FlowPointInnerVlanEthertype OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "." ::= { f3L3FlowPointEntry 34 } f3L3FlowPointIpVersion OBJECT-TYPE SYNTAX IpVersion MAX-ACCESS read-create STATUS current DESCRIPTION "." ::= { f3L3FlowPointEntry 35 } -- -- L3 ACL Rule Table -- f3L3AclRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3AclRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the L3 ACL rule." ::= { f3L3Objects 4 } f3L3AclRuleEntry OBJECT-TYPE SYNTAX F3L3AclRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3AclRuleTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L3AclRuleParentIndex, f3L3AclRuleIndex } ::= { f3L3AclRuleTable 1 } F3L3AclRuleEntry ::= SEQUENCE { f3L3AclRuleParentIndex Integer32, f3L3AclRuleIndex Integer32, f3L3AclRuleAlias F3DisplayString, f3L3AclRuleSrcIpv4AddressControl TruthValue, f3L3AclRuleDynamicSrcIpControl TruthValue, f3L3AclRuleSrcIpv4AddressLowLimit IpAddress, f3L3AclRuleDstIpv4AddressControl TruthValue, f3L3AclRuleDstIpv4AddressLowLimit IpAddress, f3L3AclRuleIpv4PriorityControl TruthValue, f3L3AclRuleIpv4PriorityLowLimit Integer32, f3L3AclRuleProtocolControl TruthValue, f3L3AclRuleProtocolNumber Integer32, f3L3AclRuleSrcPortControl TruthValue, f3L3AclRuleSrcPortLowLimit Integer32, f3L3AclRuleSrcPortHighLimit Integer32, f3L3AclRuleDstPortControl TruthValue, f3L3AclRuleDstPortLowLimit Integer32, f3L3AclRuleDstPortHighLimit Integer32, f3L3AclRulePriority Integer32, f3L3AclRuleCOS Integer32, f3L3AclRuleOperation L3AclRuleOperation, f3L3AclRuleSummary F3DisplayString, f3L3AclRuleCosOverrideControl TruthValue, f3L3AclRuleSrcMacAddressControl TruthValue, f3L3AclRuleDynamicSrcMacAddressControl TruthValue, f3L3AclRuleSrcMacAddress MacAddress, f3L3AclRuleSrcMacAddressMask MacAddress, f3L3AclRuleDstMacAddressControl TruthValue, f3L3AclRuleDstMacAddress MacAddress, f3L3AclRuleDstMacAddressMask MacAddress, f3L3AclRuleOuterVlanVIDControl TruthValue, f3L3AclRuleOuterVlanVIDLowLimit VlanId, f3L3AclRuleOuterVlanVIDHighLimit VlanId, f3L3AclRuleInnerVlanVIDControl TruthValue, f3L3AclRuleInnerVlanVIDLowLimit VlanId, f3L3AclRuleInnerVlanVIDHighLimit VlanId, f3L3AclRuleOuterVlanPcpControl TruthValue, f3L3AclRuleOuterVlanPcpLowLimit VlanPriority, f3L3AclRuleOuterVlanPcpHighLimit VlanPriority, f3L3AclRuleInnerVlanPcpControl TruthValue, f3L3AclRuleInnerVlanPcpLowLimit VlanPriority, f3L3AclRuleInnerVlanPcpHighLimit VlanPriority, f3L3AclRuleOuterVlanDeiControl TruthValue, f3L3AclRuleOuterVlanDei Unsigned32, f3L3AclRuleEtherTypeControl TruthValue, f3L3AclRuleEtherType Integer32, f3L3AclRuleTcpFlagsControl TruthValue, f3L3AclRuleTcpFlags Integer32, f3L3AclRuleSrcIpv4AddressHighLimit IpAddress, f3L3AclRuleDstIpv4AddressHighLimit IpAddress, f3L3AclRuleIpv4PriorityHighLimit Integer32, f3L3AclRuleStorageType StorageType, f3L3AclRuleRowStatus RowStatus, f3L3AclRuleAdminState AdminState, f3L3AclRuleActive TruthValue, f3L3AclRuleSrcIpV6AddressControl TruthValue, f3L3AclRuleSrcIpV6Address Ipv6Address, f3L3AclRuleSrcIpV6AddressPrefixLen Integer32, f3L3AclRuleDstIpV6AddressControl TruthValue, f3L3AclRuleDstIpV6Address Ipv6Address, f3L3AclRuleDstIpV6AddressPrefixLen Integer32, f3L3AclRuleIpV6FlowLabelControl TruthValue, f3L3AclRuleIpV6FlowLabel Integer32, f3L3AclRulePriorityControl TruthValue, f3L3AclRulePriorityLowLimit Integer32, f3L3AclRulePriorityHighLimit Integer32 } f3L3AclRuleParentIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ACL rule parent number, it could be flow index or L3 flow point index." ::= { f3L3AclRuleEntry 1 } f3L3AclRuleIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ACL rule number." ::= { f3L3AclRuleEntry 2 } f3L3AclRuleAlias OBJECT-TYPE SYNTAX F3DisplayString (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule alias." ::= { f3L3AclRuleEntry 3 } f3L3AclRuleSrcIpv4AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source IPv4 Adress control whether enabled." ::= { f3L3AclRuleEntry 4 } f3L3AclRuleDynamicSrcIpControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic source IPv4 or IPv6 Adress control whether enabled." ::= { f3L3AclRuleEntry 5 } f3L3AclRuleSrcIpv4AddressLowLimit OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source IPv4 Adress low limit." ::= { f3L3AclRuleEntry 6 } f3L3AclRuleDstIpv4AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule Destination IPv4 Adress control whether enabled." ::= { f3L3AclRuleEntry 7 } f3L3AclRuleDstIpv4AddressLowLimit OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule Destination IPv4 Adress low limit." ::= { f3L3AclRuleEntry 8 } f3L3AclRuleIpv4PriorityControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The ACL rule IPv4 Priority control whether enabled." ::= { f3L3AclRuleEntry 9 } f3L3AclRuleIpv4PriorityLowLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The ACL rule IPv4 priority low limit." ::= { f3L3AclRuleEntry 10 } f3L3AclRuleProtocolControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule protocol control whether enabled." ::= { f3L3AclRuleEntry 11 } f3L3AclRuleProtocolNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule protocol number." ::= { f3L3AclRuleEntry 12 } f3L3AclRuleSrcPortControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source port whether enabled." ::= { f3L3AclRuleEntry 13 } f3L3AclRuleSrcPortLowLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source port low limit." ::= { f3L3AclRuleEntry 14 } f3L3AclRuleSrcPortHighLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source port low limit." ::= { f3L3AclRuleEntry 15 } f3L3AclRuleDstPortControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination port whether enabled." ::= { f3L3AclRuleEntry 16 } f3L3AclRuleDstPortLowLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination port low limit." ::= { f3L3AclRuleEntry 17 } f3L3AclRuleDstPortHighLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination port low limit." ::= { f3L3AclRuleEntry 18 } f3L3AclRulePriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule priority." ::= { f3L3AclRuleEntry 19 } f3L3AclRuleCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule class of service." ::= { f3L3AclRuleEntry 20 } f3L3AclRuleOperation OBJECT-TYPE SYNTAX L3AclRuleOperation MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule action." ::= { f3L3AclRuleEntry 21 } f3L3AclRuleSummary OBJECT-TYPE SYNTAX F3DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The ACL rule summary." ::= { f3L3AclRuleEntry 22 } f3L3AclRuleCosOverrideControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule COS Override control." ::= { f3L3AclRuleEntry 23 } f3L3AclRuleSrcMacAddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule Source MAC address control." ::= { f3L3AclRuleEntry 24 } f3L3AclRuleDynamicSrcMacAddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Source MAC address control." ::= { f3L3AclRuleEntry 25 } f3L3AclRuleSrcMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Source MAC address." ::= { f3L3AclRuleEntry 26 } f3L3AclRuleSrcMacAddressMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Source MAC address mask." ::= { f3L3AclRuleEntry 27 } f3L3AclRuleDstMacAddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Destination MAC address control." ::= { f3L3AclRuleEntry 28 } f3L3AclRuleDstMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Destination MAC address." ::= { f3L3AclRuleEntry 29 } f3L3AclRuleDstMacAddressMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Destination MAC address mask." ::= { f3L3AclRuleEntry 30 } f3L3AclRuleOuterVlanVIDControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer VID control." ::= { f3L3AclRuleEntry 31 } f3L3AclRuleOuterVlanVIDLowLimit OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer Vlan ID low limit." ::= { f3L3AclRuleEntry 32 } f3L3AclRuleOuterVlanVIDHighLimit OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer Vlan ID high limit." ::= { f3L3AclRuleEntry 33 } f3L3AclRuleInnerVlanVIDControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner VID control." ::= { f3L3AclRuleEntry 34 } f3L3AclRuleInnerVlanVIDLowLimit OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner Vlan ID low limit." ::= { f3L3AclRuleEntry 35 } f3L3AclRuleInnerVlanVIDHighLimit OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule Inner Vlan ID high limit." ::= { f3L3AclRuleEntry 36 } f3L3AclRuleOuterVlanPcpControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan PCP control." ::= { f3L3AclRuleEntry 37 } f3L3AclRuleOuterVlanPcpLowLimit OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan PCP priority low limit." ::= { f3L3AclRuleEntry 38 } f3L3AclRuleOuterVlanPcpHighLimit OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan PCP priority high limit." ::= { f3L3AclRuleEntry 39 } f3L3AclRuleInnerVlanPcpControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner vlan PCP control." ::= { f3L3AclRuleEntry 40 } f3L3AclRuleInnerVlanPcpLowLimit OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner vlan PCP priority low limit." ::= { f3L3AclRuleEntry 41 } f3L3AclRuleInnerVlanPcpHighLimit OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner vlan PCP priority high limit." ::= { f3L3AclRuleEntry 42 } f3L3AclRuleOuterVlanDeiControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan DEI control." ::= { f3L3AclRuleEntry 43 } f3L3AclRuleOuterVlanDei OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan DEI." ::= { f3L3AclRuleEntry 44 } f3L3AclRuleEtherTypeControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan ether type control." ::= { f3L3AclRuleEntry 45 } f3L3AclRuleEtherType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan ether type." ::= { f3L3AclRuleEntry 46 } f3L3AclRuleTcpFlagsControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan TCP flags control." ::= { f3L3AclRuleEntry 47 } f3L3AclRuleTcpFlags OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan TCP flags." ::= { f3L3AclRuleEntry 48 } f3L3AclRuleSrcIpv4AddressHighLimit OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source ipv4 adress high limit." ::= { f3L3AclRuleEntry 49 } f3L3AclRuleDstIpv4AddressHighLimit OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination ipv4 adress high limit." ::= { f3L3AclRuleEntry 50 } f3L3AclRuleIpv4PriorityHighLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The ACL rule ipv4 priority high limit." ::= { f3L3AclRuleEntry 51 } f3L3AclRuleStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3L3AclRuleEntry 52 } f3L3AclRuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3AclRuleRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3AclRuleRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3AclRuleRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3AclRuleEntry 53 } f3L3AclRuleAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user configure the Acl Rule in in-service or management state." ::= { f3L3AclRuleEntry 54 } f3L3AclRuleActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL Rule Active activates/deactivates ACL Rule." ::= { f3L3AclRuleEntry 55 } f3L3AclRuleSrcIpV6AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source ipv6 adress control." ::= { f3L3AclRuleEntry 56 } f3L3AclRuleSrcIpV6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source ipv6 adress." ::= { f3L3AclRuleEntry 57 } f3L3AclRuleSrcIpV6AddressPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source ipv6 adress prefix length." ::= { f3L3AclRuleEntry 58 } f3L3AclRuleDstIpV6AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination ipv6 adress control." ::= { f3L3AclRuleEntry 59 } f3L3AclRuleDstIpV6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination ipv6 adress." ::= { f3L3AclRuleEntry 60 } f3L3AclRuleDstIpV6AddressPrefixLen OBJECT-TYPE SYNTAX Integer32 (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination ipv6 adress prefix length." ::= { f3L3AclRuleEntry 61 } f3L3AclRuleIpV6FlowLabelControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule ipv6 Flow Label Control enables/disables Flow Label." ::= { f3L3AclRuleEntry 62 } f3L3AclRuleIpV6FlowLabel OBJECT-TYPE SYNTAX Integer32 (0..1048575) MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule ipv6 Flow Label." ::= { f3L3AclRuleEntry 63 } f3L3AclRulePriorityControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule Priority control whether enabled." ::= { f3L3AclRuleEntry 64 } f3L3AclRulePriorityLowLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule priority low limit." ::= { f3L3AclRuleEntry 65 } f3L3AclRulePriorityHighLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule priority high limit." ::= { f3L3AclRuleEntry 66 } -- -- L2 A2N ACL Rule Table -- f3L2A2NAclRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L2A2NAclRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the L2A2N ACL rule." ::= { f3L3Objects 5 } f3L2A2NAclRuleEntry OBJECT-TYPE SYNTAX F3L2A2NAclRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L2A2NAclRuleTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L2A2NAclRuleParentIndex, f3L2A2NAclRuleIndex } ::= { f3L2A2NAclRuleTable 1 } F3L2A2NAclRuleEntry ::= SEQUENCE { f3L2A2NAclRuleParentIndex Integer32, f3L2A2NAclRuleIndex Integer32, f3L2A2NAclRuleAlias F3DisplayString, f3L2A2NAclRuleSrcIpv4AddressControl TruthValue, f3L2A2NAclRuleDynamicSrcIpControl TruthValue, f3L2A2NAclRuleSrcIpv4AddressLowLimit IpAddress, f3L2A2NAclRuleDstIpv4AddressControl TruthValue, f3L2A2NAclRuleDstIpv4AddressLowLimit IpAddress, f3L2A2NAclRuleIpv4PriorityControl TruthValue, f3L2A2NAclRuleIpv4PriorityLowLimit Integer32, f3L2A2NAclRuleProtocolControl TruthValue, f3L2A2NAclRuleProtocolNumber Integer32, f3L2A2NAclRuleSrcPortControl TruthValue, f3L2A2NAclRuleSrcPortLowLimit Integer32, f3L2A2NAclRuleSrcPortHighLimit Integer32, f3L2A2NAclRuleDstPortControl TruthValue, f3L2A2NAclRuleDstPortLowLimit Integer32, f3L2A2NAclRuleDstPortHighLimit Integer32, f3L2A2NAclRulePriority Integer32, f3L2A2NAclRuleCOS Integer32, f3L2A2NAclRuleOperation L3AclRuleOperation, f3L2A2NAclRuleSummary F3DisplayString, f3L2A2NAclRuleCosOverrideControl TruthValue, f3L2A2NAclRuleSrcMacAddressControl TruthValue, f3L2A2NAclRuleDynamicSrcMacAddressControl TruthValue, f3L2A2NAclRuleSrcMacAddress MacAddress, f3L2A2NAclRuleSrcMacAddressMask MacAddress, f3L2A2NAclRuleDstMacAddressControl TruthValue, f3L2A2NAclRuleDstMacAddress MacAddress, f3L2A2NAclRuleDstMacAddressMask MacAddress, f3L2A2NAclRuleOuterVlanVIDControl TruthValue, f3L2A2NAclRuleOuterVlanVIDLowLimit VlanId, f3L2A2NAclRuleOuterVlanVIDHighLimit VlanId, f3L2A2NAclRuleInnerVlanVIDControl TruthValue, f3L2A2NAclRuleInnerVlanVIDLowLimit VlanId, f3L2A2NAclRuleInnerVlanVIDHighLimit VlanId, f3L2A2NAclRuleOuterVlanPcpControl TruthValue, f3L2A2NAclRuleOuterVlanPcpLowLimit VlanPriority, f3L2A2NAclRuleOuterVlanPcpHighLimit VlanPriority, f3L2A2NAclRuleInnerVlanPcpControl TruthValue, f3L2A2NAclRuleInnerVlanPcpLowLimit VlanPriority, f3L2A2NAclRuleInnerVlanPcpHighLimit VlanPriority, f3L2A2NAclRuleOuterVlanDeiControl TruthValue, f3L2A2NAclRuleOuterVlanDei Unsigned32, f3L2A2NAclRuleEtherTypeControl TruthValue, f3L2A2NAclRuleEtherType Integer32, f3L2A2NAclRuleTcpFlagsControl TruthValue, f3L2A2NAclRuleTcpFlags Integer32, f3L2A2NAclRuleSrcIpv4AddressHighLimit IpAddress, f3L2A2NAclRuleDstIpv4AddressHighLimit IpAddress, f3L2A2NAclRuleIpv4PriorityHighLimit Integer32, f3L2A2NAclRuleStorageType StorageType, f3L2A2NAclRuleRowStatus RowStatus, f3L2A2NAclRuleAdminState AdminState, f3L2A2NAclRuleActive TruthValue, f3L2A2NAclRuleSrcIpV6AddressControl TruthValue, f3L2A2NAclRuleSrcIpV6Address Ipv6Address, f3L2A2NAclRuleSrcIpV6AddressPrefixLen Integer32, f3L2A2NAclRuleDstIpV6AddressControl TruthValue, f3L2A2NAclRuleDstIpV6Address Ipv6Address, f3L2A2NAclRuleDstIpV6AddressPrefixLen Integer32, f3L2A2NAclRuleIpV6FlowLabelControl TruthValue, f3L2A2NAclRuleIpV6FlowLabel Integer32 } f3L2A2NAclRuleParentIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ACL rule parent number, it could be flow index" ::= { f3L2A2NAclRuleEntry 1 } f3L2A2NAclRuleIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ACL rule number." ::= { f3L2A2NAclRuleEntry 2 } f3L2A2NAclRuleAlias OBJECT-TYPE SYNTAX F3DisplayString (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule alias." ::= { f3L2A2NAclRuleEntry 3 } f3L2A2NAclRuleSrcIpv4AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source IPv4 Adress control whether enabled." ::= { f3L2A2NAclRuleEntry 4 } f3L2A2NAclRuleDynamicSrcIpControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic source IPv4 or IPv6 Adress control whether enabled." ::= { f3L2A2NAclRuleEntry 5 } f3L2A2NAclRuleSrcIpv4AddressLowLimit OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source IPv4 Adress low limit." ::= { f3L2A2NAclRuleEntry 6 } f3L2A2NAclRuleDstIpv4AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule Destination IPv4 Adress control whether enabled." ::= { f3L2A2NAclRuleEntry 7 } f3L2A2NAclRuleDstIpv4AddressLowLimit OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule Destination IPv4 Adress low limit." ::= { f3L2A2NAclRuleEntry 8 } f3L2A2NAclRuleIpv4PriorityControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule IPv4 Priority control whether enabled." ::= { f3L2A2NAclRuleEntry 9 } f3L2A2NAclRuleIpv4PriorityLowLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule IPv4 priority low limit." ::= { f3L2A2NAclRuleEntry 10 } f3L2A2NAclRuleProtocolControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule protocol control whether enabled." ::= { f3L2A2NAclRuleEntry 11 } f3L2A2NAclRuleProtocolNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule protocol number." ::= { f3L2A2NAclRuleEntry 12 } f3L2A2NAclRuleSrcPortControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source port whether enabled." ::= { f3L2A2NAclRuleEntry 13 } f3L2A2NAclRuleSrcPortLowLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source port low limit." ::= { f3L2A2NAclRuleEntry 14 } f3L2A2NAclRuleSrcPortHighLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source port low limit." ::= { f3L2A2NAclRuleEntry 15 } f3L2A2NAclRuleDstPortControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination port whether enabled." ::= { f3L2A2NAclRuleEntry 16 } f3L2A2NAclRuleDstPortLowLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination port low limit." ::= { f3L2A2NAclRuleEntry 17 } f3L2A2NAclRuleDstPortHighLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination port low limit." ::= { f3L2A2NAclRuleEntry 18 } f3L2A2NAclRulePriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule priority." ::= { f3L2A2NAclRuleEntry 19 } f3L2A2NAclRuleCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule class of service." ::= { f3L2A2NAclRuleEntry 20 } f3L2A2NAclRuleOperation OBJECT-TYPE SYNTAX L3AclRuleOperation MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule action." ::= { f3L2A2NAclRuleEntry 21 } f3L2A2NAclRuleSummary OBJECT-TYPE SYNTAX F3DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The ACL rule summary." ::= { f3L2A2NAclRuleEntry 22 } f3L2A2NAclRuleCosOverrideControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule COS Override control." ::= { f3L2A2NAclRuleEntry 23 } f3L2A2NAclRuleSrcMacAddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule Source MAC address control." ::= { f3L2A2NAclRuleEntry 24 } f3L2A2NAclRuleDynamicSrcMacAddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Source MAC address control." ::= { f3L2A2NAclRuleEntry 25 } f3L2A2NAclRuleSrcMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Source MAC address." ::= { f3L2A2NAclRuleEntry 26 } f3L2A2NAclRuleSrcMacAddressMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Source MAC address mask." ::= { f3L2A2NAclRuleEntry 27 } f3L2A2NAclRuleDstMacAddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Destination MAC address control." ::= { f3L2A2NAclRuleEntry 28 } f3L2A2NAclRuleDstMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Destination MAC address." ::= { f3L2A2NAclRuleEntry 29 } f3L2A2NAclRuleDstMacAddressMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Destination MAC address mask." ::= { f3L2A2NAclRuleEntry 30 } f3L2A2NAclRuleOuterVlanVIDControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer VID control." ::= { f3L2A2NAclRuleEntry 31 } f3L2A2NAclRuleOuterVlanVIDLowLimit OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer Vlan ID low limit." ::= { f3L2A2NAclRuleEntry 32 } f3L2A2NAclRuleOuterVlanVIDHighLimit OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer Vlan ID high limit." ::= { f3L2A2NAclRuleEntry 33 } f3L2A2NAclRuleInnerVlanVIDControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner VID control." ::= { f3L2A2NAclRuleEntry 34 } f3L2A2NAclRuleInnerVlanVIDLowLimit OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner Vlan ID low limit." ::= { f3L2A2NAclRuleEntry 35 } f3L2A2NAclRuleInnerVlanVIDHighLimit OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule Inner Vlan ID high limit." ::= { f3L2A2NAclRuleEntry 36 } f3L2A2NAclRuleOuterVlanPcpControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan PCP control." ::= { f3L2A2NAclRuleEntry 37 } f3L2A2NAclRuleOuterVlanPcpLowLimit OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan PCP priority low limit." ::= { f3L2A2NAclRuleEntry 38 } f3L2A2NAclRuleOuterVlanPcpHighLimit OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan PCP priority high limit." ::= { f3L2A2NAclRuleEntry 39 } f3L2A2NAclRuleInnerVlanPcpControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner vlan PCP control." ::= { f3L2A2NAclRuleEntry 40 } f3L2A2NAclRuleInnerVlanPcpLowLimit OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner vlan PCP priority low limit." ::= { f3L2A2NAclRuleEntry 41 } f3L2A2NAclRuleInnerVlanPcpHighLimit OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner vlan PCP priority high limit." ::= { f3L2A2NAclRuleEntry 42 } f3L2A2NAclRuleOuterVlanDeiControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan DEI control." ::= { f3L2A2NAclRuleEntry 43 } f3L2A2NAclRuleOuterVlanDei OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan DEI." ::= { f3L2A2NAclRuleEntry 44 } f3L2A2NAclRuleEtherTypeControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan ether type control." ::= { f3L2A2NAclRuleEntry 45 } f3L2A2NAclRuleEtherType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan ether type." ::= { f3L2A2NAclRuleEntry 46 } f3L2A2NAclRuleTcpFlagsControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan TCP flags control." ::= { f3L2A2NAclRuleEntry 47 } f3L2A2NAclRuleTcpFlags OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan TCP flags." ::= { f3L2A2NAclRuleEntry 48 } f3L2A2NAclRuleSrcIpv4AddressHighLimit OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source ipv4 adress high limit." ::= { f3L2A2NAclRuleEntry 49 } f3L2A2NAclRuleDstIpv4AddressHighLimit OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination ipv4 adress high limit." ::= { f3L2A2NAclRuleEntry 50 } f3L2A2NAclRuleIpv4PriorityHighLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule ipv4 priority high limit." ::= { f3L2A2NAclRuleEntry 51 } f3L2A2NAclRuleStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3L2A2NAclRuleEntry 52 } f3L2A2NAclRuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L2A2NAclRuleRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L2A2NAclRuleRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L2A2NAclRuleRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L2A2NAclRuleEntry 53 } f3L2A2NAclRuleAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user configure the Acl Rule in-service or management state." ::= { f3L2A2NAclRuleEntry 54 } f3L2A2NAclRuleActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule active control." ::= { f3L2A2NAclRuleEntry 55 } f3L2A2NAclRuleSrcIpV6AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source ipv6 adress control." ::= { f3L2A2NAclRuleEntry 56 } f3L2A2NAclRuleSrcIpV6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source ipv6 adress." ::= { f3L2A2NAclRuleEntry 57 } f3L2A2NAclRuleSrcIpV6AddressPrefixLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source ipv6 adress prefix length." ::= { f3L2A2NAclRuleEntry 58 } f3L2A2NAclRuleDstIpV6AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination ipv6 adress control." ::= { f3L2A2NAclRuleEntry 59 } f3L2A2NAclRuleDstIpV6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination ipv6 adress." ::= { f3L2A2NAclRuleEntry 60 } f3L2A2NAclRuleDstIpV6AddressPrefixLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination ipv6 adress prefix length." ::= { f3L2A2NAclRuleEntry 61 } f3L2A2NAclRuleIpV6FlowLabelControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule IPv6 flow lable control." ::= { f3L2A2NAclRuleEntry 62 } f3L2A2NAclRuleIpV6FlowLabel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule IPv6 flow lable." ::= { f3L2A2NAclRuleEntry 63 } -- -- L2 N2A ACL Rule Table -- f3L2N2AAclRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L2N2AAclRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the L2N2A ACL rule." ::= { f3L3Objects 6 } f3L2N2AAclRuleEntry OBJECT-TYPE SYNTAX F3L2N2AAclRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L2N2AAclRuleTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L2N2AAclRuleParentIndex, f3L2N2AAclRuleIndex } ::= { f3L2N2AAclRuleTable 1 } F3L2N2AAclRuleEntry ::= SEQUENCE { f3L2N2AAclRuleParentIndex Integer32, f3L2N2AAclRuleIndex Integer32, f3L2N2AAclRuleAlias F3DisplayString, f3L2N2AAclRuleSrcIpv4AddressControl TruthValue, f3L2N2AAclRuleDynamicSrcIpControl TruthValue, f3L2N2AAclRuleSrcIpv4AddressLowLimit IpAddress, f3L2N2AAclRuleDstIpv4AddressControl TruthValue, f3L2N2AAclRuleDstIpv4AddressLowLimit IpAddress, f3L2N2AAclRuleIpv4PriorityControl TruthValue, f3L2N2AAclRuleIpv4PriorityLowLimit Integer32, f3L2N2AAclRuleProtocolControl TruthValue, f3L2N2AAclRuleProtocolNumber Integer32, f3L2N2AAclRuleSrcPortControl TruthValue, f3L2N2AAclRuleSrcPortLowLimit Integer32, f3L2N2AAclRuleSrcPortHighLimit Integer32, f3L2N2AAclRuleDstPortControl TruthValue, f3L2N2AAclRuleDstPortLowLimit Integer32, f3L2N2AAclRuleDstPortHighLimit Integer32, f3L2N2AAclRulePriority Integer32, f3L2N2AAclRuleCOS Integer32, f3L2N2AAclRuleOperation L3AclRuleOperation, f3L2N2AAclRuleSummary F3DisplayString, f3L2N2AAclRuleCosOverrideControl TruthValue, f3L2N2AAclRuleSrcMacAddressControl TruthValue, f3L2N2AAclRuleDynamicSrcMacAddressControl TruthValue, f3L2N2AAclRuleSrcMacAddress MacAddress, f3L2N2AAclRuleSrcMacAddressMask MacAddress, f3L2N2AAclRuleDstMacAddressControl TruthValue, f3L2N2AAclRuleDstMacAddress MacAddress, f3L2N2AAclRuleDstMacAddressMask MacAddress, f3L2N2AAclRuleOuterVlanVIDControl TruthValue, f3L2N2AAclRuleOuterVlanVIDLowLimit VlanId, f3L2N2AAclRuleOuterVlanVIDHighLimit VlanId, f3L2N2AAclRuleInnerVlanVIDControl TruthValue, f3L2N2AAclRuleInnerVlanVIDLowLimit VlanId, f3L2N2AAclRuleInnerVlanVIDHighLimit VlanId, f3L2N2AAclRuleOuterVlanPcpControl TruthValue, f3L2N2AAclRuleOuterVlanPcpLowLimit VlanPriority, f3L2N2AAclRuleOuterVlanPcpHighLimit VlanPriority, f3L2N2AAclRuleInnerVlanPcpControl TruthValue, f3L2N2AAclRuleInnerVlanPcpLowLimit VlanPriority, f3L2N2AAclRuleInnerVlanPcpHighLimit VlanPriority, f3L2N2AAclRuleOuterVlanDeiControl TruthValue, f3L2N2AAclRuleOuterVlanDei Unsigned32, f3L2N2AAclRuleEtherTypeControl TruthValue, f3L2N2AAclRuleEtherType Integer32, f3L2N2AAclRuleTcpFlagsControl TruthValue, f3L2N2AAclRuleTcpFlags Integer32, f3L2N2AAclRuleSrcIpv4AddressHighLimit IpAddress, f3L2N2AAclRuleDstIpv4AddressHighLimit IpAddress, f3L2N2AAclRuleIpv4PriorityHighLimit Integer32, f3L2N2AAclRuleStorageType StorageType, f3L2N2AAclRuleRowStatus RowStatus, f3L2N2AAclRuleAdminState AdminState, f3L2N2AAclRuleActive TruthValue, f3L2N2AAclRuleSrcIpV6AddressControl TruthValue, f3L2N2AAclRuleSrcIpV6Address Ipv6Address, f3L2N2AAclRuleSrcIpV6AddressPrefixLen Integer32, f3L2N2AAclRuleDstIpV6AddressControl TruthValue, f3L2N2AAclRuleDstIpV6Address Ipv6Address, f3L2N2AAclRuleDstIpV6AddressPrefixLen Integer32, f3L2N2AAclRuleIpV6FlowLabelControl TruthValue, f3L2N2AAclRuleIpV6FlowLabel Integer32 } f3L2N2AAclRuleParentIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ACL rule parent number, it could be flow index" ::= { f3L2N2AAclRuleEntry 1 } f3L2N2AAclRuleIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ACL rule number." ::= { f3L2N2AAclRuleEntry 2 } f3L2N2AAclRuleAlias OBJECT-TYPE SYNTAX F3DisplayString (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule alias." ::= { f3L2N2AAclRuleEntry 3 } f3L2N2AAclRuleSrcIpv4AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source IPv4 Adress control whether enabled." ::= { f3L2N2AAclRuleEntry 4 } f3L2N2AAclRuleDynamicSrcIpControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic source IPv4 or IPv6 Adress control whether enabled." ::= { f3L2N2AAclRuleEntry 5 } f3L2N2AAclRuleSrcIpv4AddressLowLimit OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source IPv4 Adress low limit." ::= { f3L2N2AAclRuleEntry 6 } f3L2N2AAclRuleDstIpv4AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule Destination IPv4 Adress control whether enabled." ::= { f3L2N2AAclRuleEntry 7 } f3L2N2AAclRuleDstIpv4AddressLowLimit OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule Destination IPv4 Adress low limit." ::= { f3L2N2AAclRuleEntry 8 } f3L2N2AAclRuleIpv4PriorityControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule IPv4 Priority control whether enabled." ::= { f3L2N2AAclRuleEntry 9 } f3L2N2AAclRuleIpv4PriorityLowLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule IPv4 priority low limit." ::= { f3L2N2AAclRuleEntry 10 } f3L2N2AAclRuleProtocolControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule protocol control whether enabled." ::= { f3L2N2AAclRuleEntry 11 } f3L2N2AAclRuleProtocolNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule protocol number." ::= { f3L2N2AAclRuleEntry 12 } f3L2N2AAclRuleSrcPortControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source port whether enabled." ::= { f3L2N2AAclRuleEntry 13 } f3L2N2AAclRuleSrcPortLowLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source port low limit." ::= { f3L2N2AAclRuleEntry 14 } f3L2N2AAclRuleSrcPortHighLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source port low limit." ::= { f3L2N2AAclRuleEntry 15 } f3L2N2AAclRuleDstPortControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination port whether enabled." ::= { f3L2N2AAclRuleEntry 16 } f3L2N2AAclRuleDstPortLowLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination port low limit." ::= { f3L2N2AAclRuleEntry 17 } f3L2N2AAclRuleDstPortHighLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination port low limit." ::= { f3L2N2AAclRuleEntry 18 } f3L2N2AAclRulePriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule priority." ::= { f3L2N2AAclRuleEntry 19 } f3L2N2AAclRuleCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule class of service." ::= { f3L2N2AAclRuleEntry 20 } f3L2N2AAclRuleOperation OBJECT-TYPE SYNTAX L3AclRuleOperation MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule action." ::= { f3L2N2AAclRuleEntry 21 } f3L2N2AAclRuleSummary OBJECT-TYPE SYNTAX F3DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The ACL rule summary." ::= { f3L2N2AAclRuleEntry 22 } f3L2N2AAclRuleCosOverrideControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule COS Override control." ::= { f3L2N2AAclRuleEntry 23 } f3L2N2AAclRuleSrcMacAddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule Source MAC address control." ::= { f3L2N2AAclRuleEntry 24 } f3L2N2AAclRuleDynamicSrcMacAddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Source MAC address control." ::= { f3L2N2AAclRuleEntry 25 } f3L2N2AAclRuleSrcMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Source MAC address." ::= { f3L2N2AAclRuleEntry 26 } f3L2N2AAclRuleSrcMacAddressMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Source MAC address mask." ::= { f3L2N2AAclRuleEntry 27 } f3L2N2AAclRuleDstMacAddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Destination MAC address control." ::= { f3L2N2AAclRuleEntry 28 } f3L2N2AAclRuleDstMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Destination MAC address." ::= { f3L2N2AAclRuleEntry 29 } f3L2N2AAclRuleDstMacAddressMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule dynamic Destination MAC address mask." ::= { f3L2N2AAclRuleEntry 30 } f3L2N2AAclRuleOuterVlanVIDControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer VID control." ::= { f3L2N2AAclRuleEntry 31 } f3L2N2AAclRuleOuterVlanVIDLowLimit OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer Vlan ID low limit." ::= { f3L2N2AAclRuleEntry 32 } f3L2N2AAclRuleOuterVlanVIDHighLimit OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer Vlan ID high limit." ::= { f3L2N2AAclRuleEntry 33 } f3L2N2AAclRuleInnerVlanVIDControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner VID control." ::= { f3L2N2AAclRuleEntry 34 } f3L2N2AAclRuleInnerVlanVIDLowLimit OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner Vlan ID low limit." ::= { f3L2N2AAclRuleEntry 35 } f3L2N2AAclRuleInnerVlanVIDHighLimit OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule Inner Vlan ID high limit." ::= { f3L2N2AAclRuleEntry 36 } f3L2N2AAclRuleOuterVlanPcpControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan PCP control." ::= { f3L2N2AAclRuleEntry 37 } f3L2N2AAclRuleOuterVlanPcpLowLimit OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan PCP priority low limit." ::= { f3L2N2AAclRuleEntry 38 } f3L2N2AAclRuleOuterVlanPcpHighLimit OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan PCP priority high limit." ::= { f3L2N2AAclRuleEntry 39 } f3L2N2AAclRuleInnerVlanPcpControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner vlan PCP control." ::= { f3L2N2AAclRuleEntry 40 } f3L2N2AAclRuleInnerVlanPcpLowLimit OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner vlan PCP priority low limit." ::= { f3L2N2AAclRuleEntry 41 } f3L2N2AAclRuleInnerVlanPcpHighLimit OBJECT-TYPE SYNTAX VlanPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule inner vlan PCP priority high limit." ::= { f3L2N2AAclRuleEntry 42 } f3L2N2AAclRuleOuterVlanDeiControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan DEI control." ::= { f3L2N2AAclRuleEntry 43 } f3L2N2AAclRuleOuterVlanDei OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan DEI." ::= { f3L2N2AAclRuleEntry 44 } f3L2N2AAclRuleEtherTypeControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan ether type control." ::= { f3L2N2AAclRuleEntry 45 } f3L2N2AAclRuleEtherType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan ether type." ::= { f3L2N2AAclRuleEntry 46 } f3L2N2AAclRuleTcpFlagsControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan TCP flags control." ::= { f3L2N2AAclRuleEntry 47 } f3L2N2AAclRuleTcpFlags OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule outer vlan TCP flags." ::= { f3L2N2AAclRuleEntry 48 } f3L2N2AAclRuleSrcIpv4AddressHighLimit OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source ipv4 adress high limit." ::= { f3L2N2AAclRuleEntry 49 } f3L2N2AAclRuleDstIpv4AddressHighLimit OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination ipv4 adress high limit." ::= { f3L2N2AAclRuleEntry 50 } f3L2N2AAclRuleIpv4PriorityHighLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule ipv4 priority high limit." ::= { f3L2N2AAclRuleEntry 51 } f3L2N2AAclRuleStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3L2N2AAclRuleEntry 52 } f3L2N2AAclRuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L2N2AAclRuleRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L2N2AAclRuleRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L2N2AAclRuleRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L2N2AAclRuleEntry 53 } f3L2N2AAclRuleAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows user configure the Acl Rule in-service or management state." ::= { f3L2N2AAclRuleEntry 54 } f3L2N2AAclRuleActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule active control." ::= { f3L2N2AAclRuleEntry 55 } f3L2N2AAclRuleSrcIpV6AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source ipv6 adress control." ::= { f3L2N2AAclRuleEntry 56 } f3L2N2AAclRuleSrcIpV6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source ipv6 adress." ::= { f3L2N2AAclRuleEntry 57 } f3L2N2AAclRuleSrcIpV6AddressPrefixLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule source ipv6 adress prefix length." ::= { f3L2N2AAclRuleEntry 58 } f3L2N2AAclRuleDstIpV6AddressControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination ipv6 adress control." ::= { f3L2N2AAclRuleEntry 59 } f3L2N2AAclRuleDstIpV6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination ipv6 adress." ::= { f3L2N2AAclRuleEntry 60 } f3L2N2AAclRuleDstIpV6AddressPrefixLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule destination ipv6 adress prefix length." ::= { f3L2N2AAclRuleEntry 61 } f3L2N2AAclRuleIpV6FlowLabelControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule IPv6 flow lable control." ::= { f3L2N2AAclRuleEntry 62 } f3L2N2AAclRuleIpV6FlowLabel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The ACL rule IPv6 flow lable." ::= { f3L2N2AAclRuleEntry 63 } -- --L3 Policer. Used by Ge11x product -- f3L3QosPolicerTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3QosPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Quality of Service Policer for configuration purposes." ::= { f3L3Objects 7 } f3L3QosPolicerEntry OBJECT-TYPE SYNTAX F3L3QosPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3QosPolicerTable. These entries represent a Quality of Service Policer." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3QosPolicerIndex } ::= { f3L3QosPolicerTable 1 } F3L3QosPolicerEntry ::= SEQUENCE { f3L3QosPolicerIndex Integer32, -- State Management params f3L3QosPolicerAdminState AdminState, f3L3QosPolicerOperationalState OperationalState, f3L3QosPolicerSecondaryState SecondaryState, f3L3QosPolicerCIRLo Unsigned32, f3L3QosPolicerCIRHi Unsigned32, f3L3QosPolicerEIRLo Unsigned32, f3L3QosPolicerEIRHi Unsigned32, f3L3QosPolicerCBS Integer32, f3L3QosPolicerEBS Integer32, f3L3QosPolicerAlgorithm PolicerAlgorithmType, f3L3QosPolicerColorMode PolicerColorMode, f3L3QosPolicerCouplingFlag TruthValue, f3L3QosPolicerStorageType StorageType, f3L3QosPolicerRowStatus RowStatus , f3L3QosPolicerCIRMaxHi Unsigned32, f3L3QosPolicerCIRMaxLo Unsigned32, f3L3QosPolicerEIRMaxHi Unsigned32, f3L3QosPolicerEIRMaxLo Unsigned32, f3L3QosPolicerEnvelopeObject VariablePointer, f3L3QosPolicerRank Integer32, f3L3QosPolicerPolicingEnabled TruthValue } f3L3QosPolicerIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-create STATUS current DESCRIPTION "The Policer Index that represents the COS level. This is applicable in case of a Multi COS flow. Index 1 represents COS 0; Index 2 represents COS 1 and so on. In release 5.6CC the range is extended to 1..16 to support duplicate N2A policers on a Flow. The duplicate policers are created under a Flow if network interface of the Flow is ERP Group or Split Horizon Group. In case of multi-cos Flow indices 1..8 represent policers of COS 0..7 going from Network 1 port; indices 9..16 represent policers for COS 0..7 going from Network 2 port. In case of single-cos Flow index 1 represents policer going from Network 1 port; index 9 represents policer going from Network 2 port. " ::= { f3L3QosPolicerEntry 1 } -- State Management params f3L3QosPolicerAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the QOS Flow Policer." ::= { f3L3QosPolicerEntry 2 } f3L3QosPolicerOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the QOS Flow Policer." ::= { f3L3QosPolicerEntry 3 } f3L3QosPolicerSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the QOS Flow Policer." ::= { f3L3QosPolicerEntry 4 } f3L3QosPolicerCIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the lower 32 bits of the CIR." ::= { f3L3QosPolicerEntry 5 } f3L3QosPolicerCIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the upper 32 bits of the CIR." ::= { f3L3QosPolicerEntry 6 } f3L3QosPolicerEIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the lower 32 bits of the EIR." ::= { f3L3QosPolicerEntry 7 } f3L3QosPolicerEIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the upper 32 bits of the EIR." ::= { f3L3QosPolicerEntry 8 } f3L3QosPolicerCBS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Commited Burst Size (CBS) on Policer." ::= { f3L3QosPolicerEntry 9 } f3L3QosPolicerEBS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Excess Burst Size (EBS) on the Policer." ::= { f3L3QosPolicerEntry 10 } f3L3QosPolicerAlgorithm OBJECT-TYPE SYNTAX PolicerAlgorithmType MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows specification of Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking)." ::= { f3L3QosPolicerEntry 11 } f3L3QosPolicerColorMode OBJECT-TYPE SYNTAX PolicerColorMode MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'." ::= { f3L3QosPolicerEntry 12 } f3L3QosPolicerCouplingFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level." ::= { f3L3QosPolicerEntry 13 } f3L3QosPolicerStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3L3QosPolicerEntry 14 } f3L3QosPolicerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3QosPolicerRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3QosPolicerRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3QosPolicerRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3QosPolicerEntry 15 } f3L3QosPolicerCIRMaxHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the high 32 bits." ::= { f3L3QosPolicerEntry 16 } f3L3QosPolicerCIRMaxLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the lower 32 bits." ::= { f3L3QosPolicerEntry 17 } f3L3QosPolicerEIRMaxHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the high 32 bits." ::= { f3L3QosPolicerEntry 18 } f3L3QosPolicerEIRMaxLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the lower 32 bits." ::= { f3L3QosPolicerEntry 19 } f3L3QosPolicerEnvelopeObject OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of envelope object." ::= { f3L3QosPolicerEntry 20 } f3L3QosPolicerRank OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of rank value." ::= { f3L3QosPolicerEntry 21 } f3L3QosPolicerPolicingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes whether the policing is enabled." ::= { f3L3QosPolicerEntry 22 } -- -- L3 Port Quality of Service Shaper -- f3L3QosShaperTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3QosShaperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Access Port Quality of Service Shaper for configuration purposes. These shapers can be managed when the Access Port is in evpl mode and are relevant for traffic in the network to access direction." ::= { f3L3Objects 8 } f3L3QosShaperEntry OBJECT-TYPE SYNTAX F3L3QosShaperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3QosShaperTable. These entries represent a Quality of Service Shaper." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3QosShaperIndex } ::= { f3L3QosShaperTable 1 } F3L3QosShaperEntry ::= SEQUENCE { -- QOS Shaper Index/Id f3L3QosShaperIndex Integer32, -- State Management params f3L3QosShaperAdminState AdminState, f3L3QosShaperOperationalState OperationalState, f3L3QosShaperSecondaryState SecondaryState, -- QOS Shaper Properties f3L3QosShaperCIRLo Unsigned32, f3L3QosShaperCIRHi Unsigned32, f3L3QosShaperEIRLo Unsigned32, f3L3QosShaperEIRHi Unsigned32, f3L3QosShaperBufferSize Unsigned32, f3L3QosShaperCOS Integer32, --wred threshold f3L3QosShaperWredGreenMinQueueThreshold Unsigned32, f3L3QosShaperWredGreenMaxQueueThreshold Unsigned32, f3L3QosShaperWredGreenDropProbability Unsigned32, f3L3QosShaperWredYellowMinQueueThreshold Unsigned32, f3L3QosShaperWredYellowMaxQueueThreshold Unsigned32, f3L3QosShaperWredYellowDropProbability Unsigned32, f3L3QosShaperStorageType StorageType, f3L3QosShaperRowStatus RowStatus, f3L3QosShaperWfqWeight Integer32 } f3L3QosShaperIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The unique integer index value corresponding to a Quality of Service Shaper." ::= { f3L3QosShaperEntry 1 } -- State Management params f3L3QosShaperAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the QOS Shaper." ::= { f3L3QosShaperEntry 2 } f3L3QosShaperOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the QOS Shaper." ::= { f3L3QosShaperEntry 3 } f3L3QosShaperSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the QOS Shaper." ::= { f3L3QosShaperEntry 4 } f3L3QosShaperCIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Information Rate(CIR) (Lower 32 bits)of a Shaper." ::= { f3L3QosShaperEntry 5 } f3L3QosShaperCIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Information Rate(CIR) (Higher 32 bits) of a Shaper." ::= { f3L3QosShaperEntry 6 } f3L3QosShaperEIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper." ::= { f3L3QosShaperEntry 7 } f3L3QosShaperEIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper." ::= { f3L3QosShaperEntry 8 } f3L3QosShaperBufferSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Buffer Size of the Shaper." ::= { f3L3QosShaperEntry 9 } f3L3QosShaperCOS OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the COS (Class of Service) value for the QOS Shaper." ::= { f3L3QosShaperEntry 10 } f3L3QosShaperWredGreenMinQueueThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred green packet min queue threshold value." ::= { f3L3QosShaperEntry 11 } f3L3QosShaperWredGreenMaxQueueThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred green packet max queue threshold value." ::= { f3L3QosShaperEntry 12 } f3L3QosShaperWredGreenDropProbability OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred green packet drop probability." ::= { f3L3QosShaperEntry 13 } f3L3QosShaperWredYellowMinQueueThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred yellow packet min queue threshold value." ::= { f3L3QosShaperEntry 14 } f3L3QosShaperWredYellowMaxQueueThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred yellow packet max queue threshold value." ::= { f3L3QosShaperEntry 15 } f3L3QosShaperWredYellowDropProbability OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Wred yellow packet drop probability." ::= { f3L3QosShaperEntry 16 } f3L3QosShaperStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3L3QosShaperEntry 17 } f3L3QosShaperRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3QosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3QosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3QosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3QosShaperEntry 18 } f3L3QosShaperWfqWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents wfq weight value." ::= { f3L3QosShaperEntry 19 } -- -- L3 traffic ip interface Table -- f3L3TrafficIPInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIPInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the L3 Traffic IP Interface." ::= { f3L3Objects 9 } f3L3TrafficIPInterfaceEntry OBJECT-TYPE SYNTAX F3L3TrafficIPInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficIPInterfaceTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPIfIndex } ::= { f3L3TrafficIPInterfaceTable 1 } F3L3TrafficIPInterfaceEntry ::= SEQUENCE { f3L3TrafficIPIfIndex Integer32, f3L3TrafficIPIfName DisplayString, f3L3TrafficIPIfAdminState AdminState, f3L3TrafficIPIfSecondaryState SecondaryState, f3L3TrafficIPIfOperationalState OperationalState, f3L3TrafficIPIfProxyArpEnabled TruthValue, f3L3TrafficIPIfIpAddressSourceType IfIpAddressSourceType, f3L3TrafficIPIfMgmtUseEnable TruthValue, f3L3TrafficIPIfIpAddress IpAddress, f3L3TrafficIPIfMask IpAddress, f3L3TrafficIPIfDhcpRelayInterfaceSide DhcpRelayInterfaceSide, f3L3TrafficIPIfDhcpRelayVendorClassiDOpt60 DisplayString, f3L3TrafficIPIfDhcpRelayVendorClassiDOpt60Control TruthValue, f3L3TrafficIPIfDhcpRelayUserClassOpt77 DisplayString, f3L3TrafficIPIfDhcpRelayUserClassOpt77Control TruthValue, f3L3TrafficIPIfDhcpRelayInfoOpt82Sub1 DisplayString, f3L3TrafficIPIfDhcpRelayInfoOpt82Sub1Enabled TruthValue, f3L3TrafficIPIfDhcpRelayInfoOpt82Sub2 DisplayString, f3L3TrafficIPIfDhcpRelayInfoOpt82Sub2Enabled TruthValue, f3L3TrafficIPIfDhcpEnabled TruthValue, f3L3TrafficIPIfDhcpRole CmDhcpRole, f3L3TrafficIPIfDhcpClientIdEnabled TruthValue, f3L3TrafficIPIfDhcpClientId DisplayString, f3L3TrafficIPIfDhcpClassIdEnabled TruthValue, f3L3TrafficIPIfDhcpHostNameEnabled TruthValue, f3L3TrafficIPIfDhcpHostName DisplayString, f3L3TrafficIPIfDhcpClientIdType DHCPCIDType, f3L3TrafficIPIfDhcpHostNameType DHCPHostNameType, f3L3TrafficIPIfStorageType StorageType, f3L3TrafficIPIfRowStatus RowStatus, f3L3TrafficIPIfAction AffectiveArpActionType, f3L3TrafficIPIfActionX TrafficIpInterfaceActionType, f3L3TrafficIPIfUnnumberedControl TruthValue, f3L3TrafficIPIfBorrowedIntf DisplayString, f3L3TrafficIPIfIpMode IpMode, f3L3TrafficIPIfType IpInterfaceType, f3L3TrafficIPIfIpv6LinkLocalAddr Ipv6Address, f3L3TrafficIPIfIpv6LinkLocalAddrMode Ipv6LinkLocalAddressMode, f3L3TrafficIPIfIpv6StatelessAddrAutoconfigEnabled TruthValue, f3L3TrafficIPIfDefaultGateway Ipv6Address, f3L3TrafficIPIfIcmpErrorMsgRateLimit Integer32, f3L3TrafficIPIfDhcpv6Role CmDhcpRole, f3L3TrafficIPIfDhcpv6Enabled TruthValue, f3L3TrafficIPIfDhcpRapidCommitControlEnabled TruthValue, f3L3TrafficIPIfMaxRAInterval Unsigned32, f3L3TrafficIPIfMinRAInterval Unsigned32, f3L3TrafficIPIfRouterLifeTime Unsigned32, f3L3TrafficIPIfReachableTime Unsigned32, f3L3TrafficIPIfRaDhcpMoreConfigEnabled TruthValue, f3L3TrafficIPIfRaManagedAddressConfigEnabled TruthValue, f3L3TrafficIPIfRaRDNSSOptionEnabled TruthValue, f3L3TrafficIPIfRaRDNSSLifeTime Unsigned32, f3L3TrafficIPIfRaDNSSList DisplayString, f3L3TrafficIPIfRaDefaultRouterPreference NdpRaDefaultRouterPreference, f3L3TrafficIPIfDupAddrDetectControl TruthValue, f3L3TrafficIPIfDupAddrDetectTransmits Unsigned32, f3L3TrafficIPIfDupAddrDetectRetransTimer Unsigned32, f3L3TrafficIPIfMTU Integer32 } f3L3TrafficIPIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "It specifies the traffic IP interface number." ::= { f3L3TrafficIPInterfaceEntry 1 } f3L3TrafficIPIfName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "It specifies the traffic IP interface name." ::= { f3L3TrafficIPInterfaceEntry 2 } f3L3TrafficIPIfAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the interface." ::= { f3L3TrafficIPInterfaceEntry 3 } f3L3TrafficIPIfSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the interface." ::= { f3L3TrafficIPInterfaceEntry 4 } f3L3TrafficIPIfOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the interface." ::= { f3L3TrafficIPInterfaceEntry 5 } f3L3TrafficIPIfProxyArpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls poxy ARP on this interface." ::= { f3L3TrafficIPInterfaceEntry 6 } f3L3TrafficIPIfIpAddressSourceType OBJECT-TYPE SYNTAX IfIpAddressSourceType MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the IP address source type." ::= { f3L3TrafficIPInterfaceEntry 7 } f3L3TrafficIPIfMgmtUseEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used for controlling use of interface for management. If enabled the NE can be managed through this interface." ::= { f3L3TrafficIPInterfaceEntry 8 } f3L3TrafficIPIfIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address of the interface." ::= { f3L3TrafficIPInterfaceEntry 9 } f3L3TrafficIPIfMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address mask of the interface." ::= { f3L3TrafficIPInterfaceEntry 10 } f3L3TrafficIPIfDhcpRelayInterfaceSide OBJECT-TYPE SYNTAX DhcpRelayInterfaceSide MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents interface side." ::= { f3L3TrafficIPInterfaceEntry 11 } f3L3TrafficIPIfDhcpRelayVendorClassiDOpt60 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP Option 60 value used for association of received DHCP message with Traffic IP Interface." ::= { f3L3TrafficIPInterfaceEntry 12 } f3L3TrafficIPIfDhcpRelayVendorClassiDOpt60Control OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This Attribute is used to control inspection of DHCP option 60 presence in the DHCP messages received on Client Side Traffic IP Interface." ::= { f3L3TrafficIPInterfaceEntry 13 } f3L3TrafficIPIfDhcpRelayUserClassOpt77 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP Option 77 value used for association of received DHCP message with Traffic IP Interface ." ::= { f3L3TrafficIPInterfaceEntry 14 } f3L3TrafficIPIfDhcpRelayUserClassOpt77Control OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This Attribute is used to control inspection of DHCP option 77 presence in the DHCP messages received on Client Side Traffic IP Interface." ::= { f3L3TrafficIPInterfaceEntry 15 } f3L3TrafficIPIfDhcpRelayInfoOpt82Sub1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP Option 82 sub option 1 value." ::= { f3L3TrafficIPInterfaceEntry 16 } f3L3TrafficIPIfDhcpRelayInfoOpt82Sub1Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This Attribute is used to control inspection of DHCP option 82 sub option 1 presence in the DHCP messages received on Client Side Traffic IP Interface." ::= { f3L3TrafficIPInterfaceEntry 17 } f3L3TrafficIPIfDhcpRelayInfoOpt82Sub2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP Option 82 sub option 2 value." ::= { f3L3TrafficIPInterfaceEntry 18 } f3L3TrafficIPIfDhcpRelayInfoOpt82Sub2Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This Attribute is used to control inspection of DHCP option 82 sub option 2 presence in the DHCP messages received on Client Side Traffic IP Interface." ::= { f3L3TrafficIPInterfaceEntry 19 } f3L3TrafficIPIfDhcpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not DHCP is enabled on this interface." ::= { f3L3TrafficIPInterfaceEntry 20 } f3L3TrafficIPIfDhcpRole OBJECT-TYPE SYNTAX CmDhcpRole MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the DHCP role on this interface." ::= { f3L3TrafficIPInterfaceEntry 21 } f3L3TrafficIPIfDhcpClientIdEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not DHCP client id enabled." ::= { f3L3TrafficIPInterfaceEntry 22 } f3L3TrafficIPIfDhcpClientId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the DHCP Cliend ID value." ::= { f3L3TrafficIPInterfaceEntry 23 } f3L3TrafficIPIfDhcpClassIdEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not DHCP class id enabled." ::= { f3L3TrafficIPInterfaceEntry 24 } f3L3TrafficIPIfDhcpHostNameEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not DHCP host name enabled." ::= { f3L3TrafficIPInterfaceEntry 25 } f3L3TrafficIPIfDhcpHostName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP host name value." ::= { f3L3TrafficIPInterfaceEntry 26 } f3L3TrafficIPIfDhcpClientIdType OBJECT-TYPE SYNTAX DHCPCIDType MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether the dhcp cid type." ::= { f3L3TrafficIPInterfaceEntry 27 } f3L3TrafficIPIfDhcpHostNameType OBJECT-TYPE SYNTAX DHCPHostNameType MAX-ACCESS read-write STATUS current DESCRIPTION "This object describe whether the dhcp host name type." ::= { f3L3TrafficIPInterfaceEntry 28 } f3L3TrafficIPIfStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3L3TrafficIPInterfaceEntry 29 } f3L3TrafficIPIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIPIfRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIPIfRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIPIfRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficIPInterfaceEntry 30 } f3L3TrafficIPIfAction OBJECT-TYPE SYNTAX AffectiveArpActionType MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This objects describes action set on this traffic ip interface. DEPRECATED and new variable to use is f3L3TrafficIPIfActionX." ::= { f3L3TrafficIPInterfaceEntry 31 } f3L3TrafficIPIfActionX OBJECT-TYPE SYNTAX TrafficIpInterfaceActionType MAX-ACCESS read-write STATUS current DESCRIPTION "This objects describes action set on this traffic ip interface." ::= { f3L3TrafficIPInterfaceEntry 32 } f3L3TrafficIPIfUnnumberedControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specify IP interface whether is numbered." ::= { f3L3TrafficIPInterfaceEntry 33 } f3L3TrafficIPIfBorrowedIntf OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "This object specify IP interface name whose IP address is borrowed from currect object." ::= { f3L3TrafficIPInterfaceEntry 34 } f3L3TrafficIPIfIpMode OBJECT-TYPE SYNTAX IpMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the ip mode for the interface." ::= { f3L3TrafficIPInterfaceEntry 35 } f3L3TrafficIPIfType OBJECT-TYPE SYNTAX IpInterfaceType MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the type of the interface." ::= { f3L3TrafficIPInterfaceEntry 36 } f3L3TrafficIPIfIpv6LinkLocalAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "Link-local Address." ::= { f3L3TrafficIPInterfaceEntry 37 } f3L3TrafficIPIfIpv6LinkLocalAddrMode OBJECT-TYPE SYNTAX Ipv6LinkLocalAddressMode MAX-ACCESS read-write STATUS current DESCRIPTION "The assignment mode of IPv6 Link-Local Address, only manual and automatic are applicable." ::= { f3L3TrafficIPInterfaceEntry 38 } f3L3TrafficIPIfIpv6StatelessAddrAutoconfigEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This is the control to enable or disable stateless address auto configuration." ::= { f3L3TrafficIPInterfaceEntry 39 } f3L3TrafficIPIfDefaultGateway OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "indicates active default GW of the interface." ::= { f3L3TrafficIPInterfaceEntry 40 } f3L3TrafficIPIfIcmpErrorMsgRateLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "limit originated ICMP error messages rate in number of messages per second. The value 0xFFFF shall be used to indicate no error message limit." ::= { f3L3TrafficIPInterfaceEntry 41 } f3L3TrafficIPIfDhcpv6Role OBJECT-TYPE SYNTAX CmDhcpRole MAX-ACCESS read-write STATUS current DESCRIPTION "Allows setting the DHCPv6 role on this interface." ::= { f3L3TrafficIPInterfaceEntry 42 } f3L3TrafficIPIfDhcpv6Enabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allows enabling/disabling of DHCPv6 on this interface." ::= { f3L3TrafficIPInterfaceEntry 43 } f3L3TrafficIPIfDhcpRapidCommitControlEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This is the control to enable or disable DHCP rapid commit." ::= { f3L3TrafficIPInterfaceEntry 44 } f3L3TrafficIPIfMaxRAInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum time in seconds between generated RA messages." ::= { f3L3TrafficIPInterfaceEntry 45 } f3L3TrafficIPIfMinRAInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum time in seconds between generated RA messages, should be less than 0.75* max-ra-interval." ::= { f3L3TrafficIPInterfaceEntry 46 } f3L3TrafficIPIfRouterLifeTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Time in seconds the router can be used as a default router, should be larger than max-ra-interval." ::= { f3L3TrafficIPInterfaceEntry 47 } f3L3TrafficIPIfReachableTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "time in milliseconds, that a node assumes a neighbor is reachable after having received a reachability confirmation, 0 means unspecified." ::= { f3L3TrafficIPInterfaceEntry 48 } f3L3TrafficIPIfRaDhcpMoreConfigEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "RA More configurations via DHCP." ::= { f3L3TrafficIPInterfaceEntry 49 } f3L3TrafficIPIfRaManagedAddressConfigEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "RA Managed Address Config Control." ::= { f3L3TrafficIPInterfaceEntry 50 } f3L3TrafficIPIfRaRDNSSOptionEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Control Recursive DNS server option presence in the RA messages." ::= { f3L3TrafficIPInterfaceEntry 51 } f3L3TrafficIPIfRaRDNSSLifeTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set the Lifetime field of the RDNSS option." ::= { f3L3TrafficIPInterfaceEntry 52 } f3L3TrafficIPIfRaDNSSList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "list of IPv6 addresses of DNS servers." ::= { f3L3TrafficIPInterfaceEntry 53 } f3L3TrafficIPIfRaDefaultRouterPreference OBJECT-TYPE SYNTAX NdpRaDefaultRouterPreference MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies Default Router preference field in RA according to RFC4191." ::= { f3L3TrafficIPInterfaceEntry 54 } f3L3TrafficIPIfDupAddrDetectControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allows enabling/disabling of DAD on this interface." ::= { f3L3TrafficIPInterfaceEntry 55 } f3L3TrafficIPIfDupAddrDetectTransmits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specify number of consequent NS messages sent by this interface." ::= { f3L3TrafficIPInterfaceEntry 56 } f3L3TrafficIPIfDupAddrDetectRetransTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Interval in ms between consecutive NS messages and as well as the time a node waits after sending the last NS before ending the DAD." ::= { f3L3TrafficIPInterfaceEntry 57 } f3L3TrafficIPIfMTU OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "MTU of a L3 Traffic IP Interface in bytes." ::= { f3L3TrafficIPInterfaceEntry 58 } -- -- Dhcp Relay Agent Traffic Ip Interface Member Table -- f3DhcpRelayAgentTrafficIpIfMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF F3DhcpRelayAgentTrafficIpIfMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the Dhcp Relay Agent Traffic Ip Interface member." ::= { f3L3Objects 10 } f3DhcpRelayAgentTrafficIpIfMemberEntry OBJECT-TYPE SYNTAX F3DhcpRelayAgentTrafficIpIfMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3DhcpRelayAgentTrafficIpIfMemberTable." INDEX { neIndex, f3DhcpRelayAgentIndex, f3DhcpRelayAgentTrafficIpIfMemberObject } ::= { f3DhcpRelayAgentTrafficIpIfMemberTable 1 } F3DhcpRelayAgentTrafficIpIfMemberEntry ::= SEQUENCE { f3DhcpRelayAgentTrafficIpIfMemberObject VariablePointer, f3DhcpRelayAgentTrafficIpIfMemberStorageType StorageType, f3DhcpRelayAgentTrafficIpIfMemberRowStatus RowStatus } f3DhcpRelayAgentTrafficIpIfMemberObject OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object describes the traffic ip interface." ::= { f3DhcpRelayAgentTrafficIpIfMemberEntry 1 } f3DhcpRelayAgentTrafficIpIfMemberStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3DhcpRelayAgentTrafficIpIfMemberEntry 2 } f3DhcpRelayAgentTrafficIpIfMemberRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3DhcpRelayAgentTrafficIpIfMemberRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3DhcpRelayAgentTrafficIpIfMemberRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3DhcpRelayAgentTrafficIpIfMemberRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3DhcpRelayAgentTrafficIpIfMemberEntry 3 } --- --- --- f3VrfTrafficIpIfMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF F3VrfTrafficIpIfMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the Vrf Traffic Ip Interface member." ::= { f3L3Objects 11 } f3VrfTrafficIpIfMemberEntry OBJECT-TYPE SYNTAX F3VrfTrafficIpIfMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3DhcpRelayAgentTrafficIpIfMemberTable." INDEX { neIndex, f3VrfIndex, f3VrfTrafficIpIfMemberObject } ::= { f3VrfTrafficIpIfMemberTable 1 } F3VrfTrafficIpIfMemberEntry ::= SEQUENCE { f3VrfTrafficIpIfMemberObject VariablePointer, f3VrfTrafficIpIfMemberStorageType StorageType, f3VrfTrafficIpIfMemberRowStatus RowStatus } f3VrfTrafficIpIfMemberObject OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object describes the traffic ip interface." ::= { f3VrfTrafficIpIfMemberEntry 1 } f3VrfTrafficIpIfMemberStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3VrfTrafficIpIfMemberEntry 2 } f3VrfTrafficIpIfMemberRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3VrfTrafficIpIfMemberRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3VrfTrafficIpIfMemberRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3VrfTrafficIpIfMemberRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3VrfTrafficIpIfMemberEntry 3 } -- -- L3 taffic ipv4 route Table -- f3L3TrafficIpv4RouteTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIpv4RouteEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of entries for the L3 Traffic Ipv4 route. Must set f3VrfAction as retrieveEffectiveRoutes(4) before get data from this table." ::= { f3L3Objects 12 } f3L3TrafficIpv4RouteEntry OBJECT-TYPE SYNTAX F3L3TrafficIpv4RouteEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A conceptual row in the f3L3TrafficIpv4RouteTable." INDEX { neIndex, f3VrfIndex, f3L3TrafficIpv4RouteDest, f3L3TrafficIpv4RouteMask, f3L3TrafficIpv4RouteNextHop, f3L3TrafficIpv4RouteInterface } ::= { f3L3TrafficIpv4RouteTable 1 } F3L3TrafficIpv4RouteEntry ::= SEQUENCE { f3L3TrafficIpv4RouteDest IpAddress, f3L3TrafficIpv4RouteMask IpAddress, f3L3TrafficIpv4RouteNextHop IpAddress, f3L3TrafficIpv4RouteMetric Integer32, f3L3TrafficIpv4RouteInterface DisplayString, f3L3TrafficIpv4RouteAdvertise TruthValue, f3L3TrafficIpv4RouteStatus TrafficIpRouteStatus, f3L3TrafficIpv4RouteSourceForwardingEnable TruthValue, f3L3TrafficIpv4RouteFlags RouteFlags, f3L3TrafficIpv4RouteStorageType StorageType, f3L3TrafficIpv4RouteRowStatus RowStatus, f3L3TrafficIpv4RouteType IpEntryType, f3L3TrafficIpv4RouteStatusX TrafficIpRouteStatusType, f3L3TrafficIpv4RouteOrigin TrafficIpRouteOriginType } f3L3TrafficIpv4RouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "It specifies the traffic Ipv4 route destination." ::= { f3L3TrafficIpv4RouteEntry 1 } f3L3TrafficIpv4RouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "It specifies the traffic Ipv4 route mask." ::= { f3L3TrafficIpv4RouteEntry 2 } f3L3TrafficIpv4RouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "It specifies the traffic Ipv4 route next hop." ::= { f3L3TrafficIpv4RouteEntry 3 } f3L3TrafficIpv4RouteMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "It specifies the traffic Ipv4 route metric." ::= { f3L3TrafficIpv4RouteEntry 4 } f3L3TrafficIpv4RouteInterface OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS deprecated DESCRIPTION "It specifies the traffic Ipv4 route interface." ::= { f3L3TrafficIpv4RouteEntry 5 } f3L3TrafficIpv4RouteAdvertise OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "It specifies the traffic Ipv4 route advertise." ::= { f3L3TrafficIpv4RouteEntry 6 } f3L3TrafficIpv4RouteStatus OBJECT-TYPE SYNTAX TrafficIpRouteStatus MAX-ACCESS read-only STATUS deprecated DESCRIPTION "It specifies the traffic Ipv4 route status. DEPRECATED and new attribute to use is f3L3TrafficIpv4RouteStatusX." ::= { f3L3TrafficIpv4RouteEntry 7 } f3L3TrafficIpv4RouteSourceForwardingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "It specifies the traffic Ipv4 route source forwarding whether enabled." ::= { f3L3TrafficIpv4RouteEntry 8 } f3L3TrafficIpv4RouteFlags OBJECT-TYPE SYNTAX RouteFlags MAX-ACCESS read-only STATUS obsolete DESCRIPTION "It specifies the traffic Ipv4 route flags." ::= { f3L3TrafficIpv4RouteEntry 9 } f3L3TrafficIpv4RouteStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The type of storage configured for this entry." ::= { f3L3TrafficIpv4RouteEntry 10 } f3L3TrafficIpv4RouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIpv4RouteRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIpv4RouteRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIpv4RouteRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficIpv4RouteEntry 11 } f3L3TrafficIpv4RouteType OBJECT-TYPE SYNTAX IpEntryType MAX-ACCESS read-only STATUS deprecated DESCRIPTION "It specifies the route is dynamic or static." ::= { f3L3TrafficIpv4RouteEntry 12 } f3L3TrafficIpv4RouteStatusX OBJECT-TYPE SYNTAX TrafficIpRouteStatusType MAX-ACCESS read-only STATUS deprecated DESCRIPTION "It specifies the traffic Ipv4 route status." ::= { f3L3TrafficIpv4RouteEntry 13 } f3L3TrafficIpv4RouteOrigin OBJECT-TYPE SYNTAX TrafficIpRouteOriginType MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The origin of IP Route." ::= { f3L3TrafficIpv4RouteEntry 14 } -- -- L3 Traffic Arp Table -- f3L3TrafficArpTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Traffic ARP entries on the NIDs. Must set f3L3TrafficIPIfActionX as optimizeArpRetrieve (1) before getting data from this table." ::= { f3L3Objects 13 } f3L3TrafficArpEntry OBJECT-TYPE SYNTAX F3L3TrafficArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficArpTable. Entries can be created/deleted in this table by management application action." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPIfIndex, f3L3TrafficArpIPAddress } ::= { f3L3TrafficArpTable 1 } F3L3TrafficArpEntry ::= SEQUENCE { f3L3TrafficArpIPAddress IpAddress, f3L3TrafficArpMacAddress MacAddress, f3L3TrafficArpInterface DisplayString, f3L3TrafficArpEntryType IpEntryType, f3L3TrafficArpStorageType StorageType, f3L3TrafficArpRowStatus RowStatus } f3L3TrafficArpIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object allows configuration of the ARP Entry IP Address." ::= { f3L3TrafficArpEntry 1 } f3L3TrafficArpMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows management of the ARP Entry MAC Address." ::= { f3L3TrafficArpEntry 2 } f3L3TrafficArpInterface OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows management of the ARP Entry Interface." ::= { f3L3TrafficArpEntry 3 } f3L3TrafficArpEntryType OBJECT-TYPE SYNTAX IpEntryType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of ARP Entry. Note that static entries can be created." ::= { f3L3TrafficArpEntry 4 } f3L3TrafficArpStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3L3TrafficArpEntry 5 } f3L3TrafficArpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row. The f3L3TrafficArpRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3)." ::= { f3L3TrafficArpEntry 6 } -- -- L3 Traffic BGP Router Table -- f3L3TrafficBgpRouterTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficBgpRouterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Traffic BGP Router." ::= { f3L3Objects 14 } f3L3TrafficBgpRouterEntry OBJECT-TYPE SYNTAX F3L3TrafficBgpRouterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficBgpRouterTable. Entries can be created/deleted in this table by management application action." INDEX { neIndex, f3VrfIndex, f3L3TrafficBgpRouterIndex } ::= { f3L3TrafficBgpRouterTable 1 } F3L3TrafficBgpRouterEntry ::= SEQUENCE { f3L3TrafficBgpRouterIndex Unsigned32, f3L3TrafficBgpRouterAdminState AdminState, f3L3TrafficBgpRouterSecondaryState SecondaryState, f3L3TrafficBgpRouterOperationalState OperationalState, f3L3TrafficBgpRouterId IpAddress, f3L3TrafficBgpRouterAsNumber Unsigned32, f3L3TrafficBgpRouterConnectedRoutesRedistControl TruthValue, f3L3TrafficBgpRouterOspfRoutesRedistControl TruthValue, f3L3TrafficBgpRouterStaticRoutesRedistControl TruthValue, f3L3TrafficBgpRouterDhcpRoutesRedistControl TruthValue, f3L3TrafficBgpRouterStorageType StorageType, f3L3TrafficBgpRouterRowStatus RowStatus, f3L3TrafficBgpRouterAction BgpRouterActionType, f3L3TrafficBgpRouterIBgpAdminDistance Unsigned32, f3L3TrafficBgpRouterEBgpAdminDistance Unsigned32, f3L3TrafficBgpRouterEcmpMaximumPaths Unsigned32, f3L3TrafficBgpRouterRestartTime Unsigned32, f3L3TrafficBgpRouterStaleRoutesTime Unsigned32 } f3L3TrafficBgpRouterIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ID of BGP router." ::= { f3L3TrafficBgpRouterEntry 1 } f3L3TrafficBgpRouterAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the Traffic BGP Router." ::= { f3L3TrafficBgpRouterEntry 2 } f3L3TrafficBgpRouterSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Traffic BGP Router." ::= { f3L3TrafficBgpRouterEntry 3 } f3L3TrafficBgpRouterOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the Traffic BGP Router." ::= { f3L3TrafficBgpRouterEntry 4 } f3L3TrafficBgpRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "BGP Router Identifier." ::= { f3L3TrafficBgpRouterEntry 5 } f3L3TrafficBgpRouterAsNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Local autonomous system number of the router. Uses the 32-bit as-number type from the model in RFC 6991." ::= { f3L3TrafficBgpRouterEntry 6 } f3L3TrafficBgpRouterConnectedRoutesRedistControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute is used to control connected route redistribution into BGP." ::= { f3L3TrafficBgpRouterEntry 7 } f3L3TrafficBgpRouterOspfRoutesRedistControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute specifies OSPF route redistribution options False - OSPF routes are not redistributed to the BGP True - OSPF routes are redistributed to BGP." ::= { f3L3TrafficBgpRouterEntry 8 } f3L3TrafficBgpRouterStaticRoutesRedistControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute is used to control static route redistribution into BGP." ::= { f3L3TrafficBgpRouterEntry 9 } f3L3TrafficBgpRouterDhcpRoutesRedistControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute is used to control DHCP route redistribution into BGP." ::= { f3L3TrafficBgpRouterEntry 10 } f3L3TrafficBgpRouterStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3L3TrafficBgpRouterEntry 11 } f3L3TrafficBgpRouterRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficBgpRouterRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficBgpRouterRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficBgpRouterRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficBgpRouterEntry 12 } f3L3TrafficBgpRouterAction OBJECT-TYPE SYNTAX BgpRouterActionType MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes action set on this BGP Router." ::= { f3L3TrafficBgpRouterEntry 13 } f3L3TrafficBgpRouterIBgpAdminDistance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Administrative distance for routes learned from internal BGP (iBGP)." ::= { f3L3TrafficBgpRouterEntry 14 } f3L3TrafficBgpRouterEBgpAdminDistance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Administrative distance for routes learned from external BGP (eBGP)." ::= { f3L3TrafficBgpRouterEntry 15 } f3L3TrafficBgpRouterEcmpMaximumPaths OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of path used in ECMP for BGP routes." ::= { f3L3TrafficBgpRouterEntry 16 } f3L3TrafficBgpRouterRestartTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Estimated time (in seconds) for the local BGP speaker to restart a session.This value is advertise in the graceful restart BGP capability. This is a 12-bit value, referred to as Restart Time in RFC4724. Per RFC4724, the suggested default value is <= the hold-time value." ::= { f3L3TrafficBgpRouterEntry 17 } f3L3TrafficBgpRouterStaleRoutesTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "An upper-bound on the time that stale routes will be retained by a router after a session is restarted. If an End-of-RIB (EOR) marker is received prior to this timer expiring stale-routes will be flushed upon its receipt - if no EOR is received, then when this timer expires stale paths will be purged. This timer is referred to as the Selection_Deferral_Timer in FC4724." ::= { f3L3TrafficBgpRouterEntry 18 } -- -- L3 Traffic BGP Route Table -- f3L3TrafficBgpRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficBgpRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP routes. Must set f3L3TrafficBgpRouterAction as optimizeBgpRouteRetrieve(1) before get data from this table." ::= { f3L3Objects 15 } f3L3TrafficBgpRouteEntry OBJECT-TYPE SYNTAX F3L3TrafficBgpRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficBgpRouteTable. Entries can be created/deleted in this table by management application action." INDEX { neIndex, f3VrfIndex, f3L3TrafficBgpRouterIndex, f3L3TrafficBgpRouteNetwork, f3L3TrafficBgpRouteMetric, f3L3TrafficBgpRouteNextHop } ::= { f3L3TrafficBgpRouteTable 1 } F3L3TrafficBgpRouteEntry ::= SEQUENCE { f3L3TrafficBgpRouteNetwork IpAddress, f3L3TrafficBgpRouteMetric Unsigned32, f3L3TrafficBgpRouteNextHop IpAddress, f3L3TrafficBgpRoutePath DisplayString } f3L3TrafficBgpRouteNetwork OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Network of destination. Key of the table." ::= { f3L3TrafficBgpRouteEntry 1 } f3L3TrafficBgpRouteMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Metric value of this route. Key of the table." ::= { f3L3TrafficBgpRouteEntry 2 } f3L3TrafficBgpRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP address of next hop. Key of the table." ::= { f3L3TrafficBgpRouteEntry 3 } f3L3TrafficBgpRoutePath OBJECT-TYPE SYNTAX DisplayString (SIZE(0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "The list of AS numbers to the destination." ::= { f3L3TrafficBgpRouteEntry 4 } -- -- L3 Traffic BGP Peer Table -- f3L3TrafficBgpPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficBgpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Traffic BGP peer." ::= { f3L3Objects 16 } f3L3TrafficBgpPeerEntry OBJECT-TYPE SYNTAX F3L3TrafficBgpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficBgpPeerTable. Entries can be created/deleted in this table by management application action." INDEX { neIndex, f3VrfIndex, f3L3TrafficBgpRouterIndex, f3L3TrafficBgpPeerIndex } ::= { f3L3TrafficBgpPeerTable 1 } F3L3TrafficBgpPeerEntry ::= SEQUENCE { f3L3TrafficBgpPeerIndex Unsigned32, f3L3TrafficBgpPeerAdminState AdminState, f3L3TrafficBgpPeerSecondaryState SecondaryState, f3L3TrafficBgpPeerOperationalState OperationalState, f3L3TrafficBgpPeerIpv4Addr IpAddress, f3L3TrafficBgpPeerAsNumber Unsigned32, f3L3TrafficBgpPeerDescription DisplayString, f3L3TrafficBgpPeerBgpSessionState BgpSessionStateType, f3L3TrafficBgpPeerHoldTime Unsigned32, f3L3TrafficBgpPeerStartupHoldTime Unsigned32, f3L3TrafficBgpPeerKeepAliveTime Unsigned32, f3L3TrafficBgpPeerConnectRetryTime Unsigned32, f3L3TrafficBgpPeerUpdateSourceIp IpAddress, f3L3TrafficBgpPeerAuthenticationKey VariablePointer, f3L3TrafficBgpPeerTimeSinceUpTransition Unsigned32, f3L3TrafficBgpPeerTimeSinceDownTransition Unsigned32, f3L3TrafficBgpPeerStorageType StorageType, f3L3TrafficBgpPeerRowStatus RowStatus, f3L3TrafficBgpPeerIpVersion IpVersion, f3L3TrafficBgpPeerIpv6Address Ipv6Address, f3L3TrafficBgpPeerUpdateSourceIpv6 Ipv6Address, f3L3TrafficBgpPeerMultihopControl TruthValue, f3L3TrafficBgpPeerMultihopTtl Unsigned32, f3L3TrafficBgpPeerUpdateSourceInterface DisplayString, f3L3TrafficBgpPeerUpdateSourceType BgpUpdateSourceType, f3L3TrafficBgpPeerLocalPreference Unsigned32, f3L3TrafficBgpPeerRouteReflectorClient TruthValue, f3L3TrafficBgpPeerRouteReflectorClusterId IpAddress, f3L3TrafficBgpPeerBgpRouteInboundFilter DisplayString, f3L3TrafficBgpPeerBgpRouteOutboundFilter DisplayString, f3L3TrafficBgpPeerBgpGracefulRestart BgpGracefulRestartControlType, f3L3TrafficBgpPeerPeerRestartTime Unsigned32, f3L3TrafficBgpPeerPeerRestarting TruthValue } f3L3TrafficBgpPeerIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ID of BGP peer instance." ::= { f3L3TrafficBgpPeerEntry 1 } f3L3TrafficBgpPeerAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the Traffic BGP Peer." ::= { f3L3TrafficBgpPeerEntry 2 } f3L3TrafficBgpPeerSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Traffic BGP Peer." ::= { f3L3TrafficBgpPeerEntry 3 } f3L3TrafficBgpPeerOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the Traffic BGP Peer." ::= { f3L3TrafficBgpPeerEntry 4 } f3L3TrafficBgpPeerIpv4Addr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "BGP Neighbor IP address." ::= { f3L3TrafficBgpPeerEntry 5 } f3L3TrafficBgpPeerAsNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "AS number of the peer." ::= { f3L3TrafficBgpPeerEntry 6 } f3L3TrafficBgpPeerDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "An optional textual description intended primarily for use with a peer or group." ::= { f3L3TrafficBgpPeerEntry 7 } f3L3TrafficBgpPeerBgpSessionState OBJECT-TYPE SYNTAX BgpSessionStateType MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates BGP session state." ::= { f3L3TrafficBgpPeerEntry 8 } f3L3TrafficBgpPeerHoldTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval in seconds that a BGP session will be considered active in the absence of keepalive or other messages from the peer. The hold-time is typically set to 3x the keepalive-interval." ::= { f3L3TrafficBgpPeerEntry 9 } f3L3TrafficBgpPeerStartupHoldTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Value of the hold timer used before the routers have a chance to exchange open messages and agree on the real value." ::= { f3L3TrafficBgpPeerEntry 10 } f3L3TrafficBgpPeerKeepAliveTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval in seconds between transmission of keepalive messages to the neighbor. Typically set to 1/3 the hold-time." ::= { f3L3TrafficBgpPeerEntry 11 } f3L3TrafficBgpPeerConnectRetryTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Time interval in seconds between attempts to establish a session with the peer." ::= { f3L3TrafficBgpPeerEntry 12 } f3L3TrafficBgpPeerUpdateSourceIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address used to update the source IP of BGP message transmitted. Normally loopback interface IP may be used to support loadsharing/redundancy between local and peer. Default value 0.0.0.0 implies no update." ::= { f3L3TrafficBgpPeerEntry 13 } f3L3TrafficBgpPeerAuthenticationKey OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication Key used with neighboring devices." ::= { f3L3TrafficBgpPeerEntry 14 } f3L3TrafficBgpPeerTimeSinceUpTransition OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since last transition to Established state." ::= { f3L3TrafficBgpPeerEntry 15 } f3L3TrafficBgpPeerTimeSinceDownTransition OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of seconds since last transition out of Established state." ::= { f3L3TrafficBgpPeerEntry 16 } f3L3TrafficBgpPeerStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3L3TrafficBgpPeerEntry 17 } f3L3TrafficBgpPeerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficBgpPeerRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficBgpPeerRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficBgpPeerRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficBgpPeerEntry 18 } f3L3TrafficBgpPeerIpVersion OBJECT-TYPE SYNTAX IpVersion MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is supported on ge11x units." ::= { f3L3TrafficBgpPeerEntry 19 } f3L3TrafficBgpPeerIpv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is supported on ge11x units." ::= { f3L3TrafficBgpPeerEntry 20 } f3L3TrafficBgpPeerUpdateSourceIpv6 OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is supported on ge11x units." ::= { f3L3TrafficBgpPeerEntry 21 } f3L3TrafficBgpPeerMultihopControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is supported on ge11x units." ::= { f3L3TrafficBgpPeerEntry 22 } f3L3TrafficBgpPeerMultihopTtl OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is supported on ge11x units." ::= { f3L3TrafficBgpPeerEntry 23 } f3L3TrafficBgpPeerUpdateSourceInterface OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is supported on ge11x units." ::= { f3L3TrafficBgpPeerEntry 24 } f3L3TrafficBgpPeerUpdateSourceType OBJECT-TYPE SYNTAX BgpUpdateSourceType MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is supported on ge11x units." ::= { f3L3TrafficBgpPeerEntry 25 } f3L3TrafficBgpPeerLocalPreference OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is supported on ge11x/xgpro units." ::= { f3L3TrafficBgpPeerEntry 26 } f3L3TrafficBgpPeerRouteReflectorClient OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is supported on ge11x/xgpro units." ::= { f3L3TrafficBgpPeerEntry 27 } f3L3TrafficBgpPeerRouteReflectorClusterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is supported on ge11x/xgpro units." ::= { f3L3TrafficBgpPeerEntry 28 } f3L3TrafficBgpPeerBgpRouteInboundFilter OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This is the name of the IP Prefix List that is used as the filter for Inbound. This is a read-write value. A null string implies there is no filter." ::= { f3L3TrafficBgpPeerEntry 29 } f3L3TrafficBgpPeerBgpRouteOutboundFilter OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This is the name of the IP Prefix List that is used as the filter for Inbound. This is a read-write value. A null string implies there is no filter." ::= { f3L3TrafficBgpPeerEntry 30 } f3L3TrafficBgpPeerBgpGracefulRestart OBJECT-TYPE SYNTAX BgpGracefulRestartControlType MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the graceful restart capability. Helper_only means the router does not support local restarting, but able to assist remote peer's restart.." ::= { f3L3TrafficBgpPeerEntry 31 } f3L3TrafficBgpPeerPeerRestartTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The period of time (advertised by the peer) that the peer expects a restart of a BGP session to take.." ::= { f3L3TrafficBgpPeerEntry 32 } f3L3TrafficBgpPeerPeerRestarting OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This flag indicates whether the remote neighbor is currently in the process of restarting, and hence received routes are currently stale." ::= { f3L3TrafficBgpPeerEntry 33 } -- -- OSPF Router -- f3VrfOspfRouterTable OBJECT-TYPE SYNTAX SEQUENCE OF F3VrfOspfRouterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OSPF Router." ::= { f3L3Objects 17 } f3VrfOspfRouterEntry OBJECT-TYPE SYNTAX F3VrfOspfRouterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in f3VrfOspfRouterTable." INDEX { neIndex, f3VrfIndex, f3VrfOspfRouterIndex } ::= { f3VrfOspfRouterTable 1 } F3VrfOspfRouterEntry ::= SEQUENCE { f3VrfOspfRouterIndex Unsigned32, f3VrfOspfRouterAdminState AdminState, f3VrfOspfRouterSecondaryState SecondaryState, f3VrfOspfRouterOperationalState OperationalState, f3VrfOspfRouterId IpAddress, f3VrfOspfRouterDescription DisplayString, f3VrfOspfRouterBgpRoutesRedistributeToOspf TruthValue, f3VrfOspfRouterBgpRoutesMetricType RoutesMetricType, f3VrfOspfRouterBgpRoutesMetric Unsigned32, f3VrfOspfRouterStaticRoutesRedistributeToOspf TruthValue, f3VrfOspfRouterStaticRoutesMetricType RoutesMetricType, f3VrfOspfRouterStaticRoutesMetric Unsigned32, f3VrfOspfRouterConnectedRoutesRedistributeToOspf TruthValue, f3VrfOspfRouterConnectedRoutesMetricType RoutesMetricType, f3VrfOspfRouterConnectedRoutesMetric Unsigned32, f3VrfOspfRouterDhcpRoutesRedistributeToOspf TruthValue, f3VrfOspfRouterDhcpRoutesMetricType RoutesMetricType, f3VrfOspfRouterDhcpRoutesMetric Unsigned32, f3VrfOspfRouterIsAbr TruthValue, f3VrfOspfRouterIsAsbr TruthValue, f3VrfOspfRouterStorageType StorageType, f3VrfOspfRouterRowStatus RowStatus, f3VrfOspfRouterAction OspfRouterActionType, f3VrfOspfRouterVersion OspfVersion, f3VrfOspfRouterAdministrativeDistance Unsigned32, f3VrfOspfRouterSlaacRoutesRedistributeToOspf TruthValue, f3VrfOspfRouterSlaacRoutesMetricType RoutesMetricType, f3VrfOspfRouterSlaacRoutesMetric Unsigned32, f3VrfOspfRouterEcmpMaximumPaths Unsigned32, f3VrfOspfRouterSrControl TruthValue, f3VrfOspfRouterConvergenceTime Unsigned32 } f3VrfOspfRouterIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ID of OSPF Router instance." ::= { f3VrfOspfRouterEntry 1 } f3VrfOspfRouterAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the Traffic OSPF Router." ::= { f3VrfOspfRouterEntry 2 } f3VrfOspfRouterSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the Traffic OSPF Router." ::= { f3VrfOspfRouterEntry 3 } f3VrfOspfRouterOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the Traffic OSPF Router." ::= { f3VrfOspfRouterEntry 4 } f3VrfOspfRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address used as Router ID for the OSPF protocol." ::= { f3VrfOspfRouterEntry 5 } f3VrfOspfRouterDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The description of OSPF router." ::= { f3VrfOspfRouterEntry 6 } f3VrfOspfRouterBgpRoutesRedistributeToOspf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to control redistribution of dynamic routes learnt via BGP into OSPF." ::= { f3VrfOspfRouterEntry 7 } f3VrfOspfRouterBgpRoutesMetricType OBJECT-TYPE SYNTAX RoutesMetricType MAX-ACCESS read-write STATUS current DESCRIPTION "Metric type of the BGP routes redistributed to OSPF." ::= { f3VrfOspfRouterEntry 8 } f3VrfOspfRouterBgpRoutesMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Metric value of the BGP routes redistributed to OSPF." ::= { f3VrfOspfRouterEntry 9 } f3VrfOspfRouterStaticRoutesRedistributeToOspf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to control redistribution of static routes into OSPF." ::= { f3VrfOspfRouterEntry 10 } f3VrfOspfRouterStaticRoutesMetricType OBJECT-TYPE SYNTAX RoutesMetricType MAX-ACCESS read-write STATUS current DESCRIPTION "Metric type of the static routes redistributed to OSPF." ::= { f3VrfOspfRouterEntry 11 } f3VrfOspfRouterStaticRoutesMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Metric value of the static routes redistributed to OSPF." ::= { f3VrfOspfRouterEntry 12 } f3VrfOspfRouterConnectedRoutesRedistributeToOspf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to control redistribution of connected routes into OSPF." ::= { f3VrfOspfRouterEntry 13 } f3VrfOspfRouterConnectedRoutesMetricType OBJECT-TYPE SYNTAX RoutesMetricType MAX-ACCESS read-write STATUS current DESCRIPTION "Metric type of the connected routes redistributed to OSPF." ::= { f3VrfOspfRouterEntry 14 } f3VrfOspfRouterConnectedRoutesMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Metric value of the connected routes redistributed to OSPF." ::= { f3VrfOspfRouterEntry 15 } f3VrfOspfRouterDhcpRoutesRedistributeToOspf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to control redistribution of dynamic routes learnt via DHCP into OSPF." ::= { f3VrfOspfRouterEntry 16 } f3VrfOspfRouterDhcpRoutesMetricType OBJECT-TYPE SYNTAX RoutesMetricType MAX-ACCESS read-write STATUS current DESCRIPTION "Metric type of the DHCP routes redistributed to OSPF." ::= { f3VrfOspfRouterEntry 17 } f3VrfOspfRouterDhcpRoutesMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Metric value of the DHCP routes redistributed to OSPF." ::= { f3VrfOspfRouterEntry 18 } f3VrfOspfRouterIsAbr OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3VrfOspfRouterEntry 19 } f3VrfOspfRouterIsAsbr OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3VrfOspfRouterEntry 20 } f3VrfOspfRouterStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3VrfOspfRouterEntry 21 } f3VrfOspfRouterRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3VrfOspfRouterRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3VrfOspfRouterRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3VrfOspfRouterRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3VrfOspfRouterEntry 22 } f3VrfOspfRouterAction OBJECT-TYPE SYNTAX OspfRouterActionType MAX-ACCESS read-write STATUS current DESCRIPTION "The Ospf Router action." ::= { f3VrfOspfRouterEntry 23 } f3VrfOspfRouterVersion OBJECT-TYPE SYNTAX OspfVersion MAX-ACCESS read-write STATUS current DESCRIPTION "The version of the Ospf Router." ::= { f3VrfOspfRouterEntry 24 } f3VrfOspfRouterAdministrativeDistance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Administrative Distance of the Ospf Router." ::= { f3VrfOspfRouterEntry 25 } f3VrfOspfRouterSlaacRoutesRedistributeToOspf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to control redistribution of dynamic routes learnt via SLAAC into OSPF." ::= { f3VrfOspfRouterEntry 26 } f3VrfOspfRouterSlaacRoutesMetricType OBJECT-TYPE SYNTAX RoutesMetricType MAX-ACCESS read-write STATUS current DESCRIPTION "Metric type of the SLAAC routes redistributed to OSPF." ::= { f3VrfOspfRouterEntry 27 } f3VrfOspfRouterSlaacRoutesMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Metric value of the SLAAC routes redistributed to OSPF." ::= { f3VrfOspfRouterEntry 28 } f3VrfOspfRouterEcmpMaximumPaths OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of path used in ECMP for OSPF routes." ::= { f3VrfOspfRouterEntry 29 } f3VrfOspfRouterSrControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Segment Routing Control." ::= { f3VrfOspfRouterEntry 30 } f3VrfOspfRouterConvergenceTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Convergence Time." ::= { f3VrfOspfRouterEntry 31 } -- -- L3 Traffic OSPF Area -- f3L3TrafficOspfAreaTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficOspfAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Traffic OSPF Area." ::= { f3L3Objects 18 } f3L3TrafficOspfAreaEntry OBJECT-TYPE SYNTAX F3L3TrafficOspfAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in f3L3TrafficOspfAreaTable." INDEX { neIndex, f3VrfIndex, f3VrfOspfRouterIndex, f3L3TrafficOspfAreaIndex } ::= { f3L3TrafficOspfAreaTable 1 } F3L3TrafficOspfAreaEntry ::= SEQUENCE { f3L3TrafficOspfAreaIndex Unsigned32, f3L3TrafficOspfAreaType TrafficOspfAreaType, f3L3TrafficOspfAreaDefaultCost Unsigned32, f3L3TrafficOspfAreaId IpAddress, f3L3TrafficOspfAreaStorageType StorageType, f3L3TrafficOspfAreaRowStatus RowStatus, f3L3TrafficOspfAreaAuthType OspfAuthType, f3L3TrafficOspfAreaSimpleAuthKey DisplayString, f3L3TrafficOspfAreaCryptoKeyId VariablePointer } f3L3TrafficOspfAreaIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ID of OSPF Area instance." ::= { f3L3TrafficOspfAreaEntry 1 } f3L3TrafficOspfAreaType OBJECT-TYPE SYNTAX TrafficOspfAreaType MAX-ACCESS read-write STATUS current DESCRIPTION "OSPF Area Type." ::= { f3L3TrafficOspfAreaEntry 2 } f3L3TrafficOspfAreaDefaultCost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The cost of a default route propagated to stub area." ::= { f3L3TrafficOspfAreaEntry 3 } f3L3TrafficOspfAreaId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The 32-bit number identifying the area." ::= { f3L3TrafficOspfAreaEntry 4 } f3L3TrafficOspfAreaStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3L3TrafficOspfAreaEntry 5 } f3L3TrafficOspfAreaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficOspfAreaRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficOspfAreaRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficOspfAreaRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficOspfAreaEntry 6 } f3L3TrafficOspfAreaAuthType OBJECT-TYPE SYNTAX OspfAuthType MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to specify authentication type." ::= { f3L3TrafficOspfAreaEntry 7 } f3L3TrafficOspfAreaSimpleAuthKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The attribute is used to specify simple authentication key." ::= { f3L3TrafficOspfAreaEntry 8 } f3L3TrafficOspfAreaCryptoKeyId OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication Key Id." ::= { f3L3TrafficOspfAreaEntry 9 } -- -- L3 Traffic OSPF Area Interface Member List -- f3L3TrafficOspfAreaIfMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficOspfAreaIfMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OSPF Area Interface Member." ::= { f3L3Objects 19 } f3L3TrafficOspfAreaIfMemberEntry OBJECT-TYPE SYNTAX F3L3TrafficOspfAreaIfMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in f3L3TrafficOspfAreaIfMemberTable." INDEX { neIndex, f3VrfIndex, f3VrfOspfRouterIndex, f3L3TrafficOspfAreaIndex, f3L3TrafficOspfAreaIfMemberObject } ::= { f3L3TrafficOspfAreaIfMemberTable 1 } F3L3TrafficOspfAreaIfMemberEntry ::= SEQUENCE { f3L3TrafficOspfAreaIfMemberObject VariablePointer, f3L3TrafficOspfAreaIfMemberStorageType StorageType, f3L3TrafficOspfAreaIfMemberRowStatus RowStatus } f3L3TrafficOspfAreaIfMemberObject OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS not-accessible STATUS current DESCRIPTION "OSPF Area Interface Member." ::= { f3L3TrafficOspfAreaIfMemberEntry 1 } f3L3TrafficOspfAreaIfMemberStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3L3TrafficOspfAreaIfMemberEntry 2 } f3L3TrafficOspfAreaIfMemberRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficOspfAreaIfMemberRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficOspfAreaIfMemberRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficOspfAreaIfMemberRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficOspfAreaIfMemberEntry 3 } -- -- VRF Loopback Interface -- f3VrfLoopbackInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF F3VrfLoopbackInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." ::= { f3L3Objects 20 } f3VrfLoopbackInterfaceEntry OBJECT-TYPE SYNTAX F3VrfLoopbackInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in f3VrfLoopbackInterfaceTable." INDEX { neIndex, f3VrfIndex, f3VrfLoopbackInterfaceIndex } ::= { f3VrfLoopbackInterfaceTable 1 } F3VrfLoopbackInterfaceEntry ::= SEQUENCE { f3VrfLoopbackInterfaceIndex Unsigned32, f3VrfLoopbackInterfaceName DisplayString, f3VrfLoopbackInterfaceIpAddress IpAddress, f3VrfLoopbackInterfaceNetMask IpAddress, f3VrfLoopbackInterfaceCIRLo Unsigned32, f3VrfLoopbackInterfaceCIRHi Unsigned32, f3VrfLoopbackInterfaceStorageType StorageType, f3VrfLoopbackInterfaceRowStatus RowStatus, f3VrfLoopbackInterfaceIpMode IpMode, f3VrfLoopbackInterfaceIpv6Address Ipv6Address, f3VrfLoopbackInterfaceIpv6AddrPrefixLen Integer32 } f3VrfLoopbackInterfaceIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "." ::= { f3VrfLoopbackInterfaceEntry 1 } f3VrfLoopbackInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "." ::= { f3VrfLoopbackInterfaceEntry 2 } f3VrfLoopbackInterfaceIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "." ::= { f3VrfLoopbackInterfaceEntry 3 } f3VrfLoopbackInterfaceNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "." ::= { f3VrfLoopbackInterfaceEntry 4 } f3VrfLoopbackInterfaceCIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "." ::= { f3VrfLoopbackInterfaceEntry 5 } f3VrfLoopbackInterfaceCIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "." ::= { f3VrfLoopbackInterfaceEntry 6 } f3VrfLoopbackInterfaceStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3VrfLoopbackInterfaceEntry 7 } f3VrfLoopbackInterfaceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3VrfLoopbackInterfaceRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3VrfLoopbackInterfaceRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3VrfLoopbackInterfaceRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3VrfLoopbackInterfaceEntry 8 } f3VrfLoopbackInterfaceIpMode OBJECT-TYPE SYNTAX IpMode MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the ip mode for the interface." ::= { f3VrfLoopbackInterfaceEntry 9 } f3VrfLoopbackInterfaceIpv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the ipv6 address for the interface." ::= { f3VrfLoopbackInterfaceEntry 10 } f3VrfLoopbackInterfaceIpv6AddrPrefixLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object means the ipv6 address prefix length for the interface." ::= { f3VrfLoopbackInterfaceEntry 11 } -- -- L3 Traffic Ospf AS Link State Database -- f3L3TrafficOspfAsLsDbTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficOspfAsLsDbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OSPF AS Link State Database. Must set f3VrfOspfRouterAction as optimizeOspfAsLsDbRetrieve(1) before get data from this table." ::= { f3L3Objects 21 } f3L3TrafficOspfAsLsDbEntry OBJECT-TYPE SYNTAX F3L3TrafficOspfAsLsDbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficOspfAsLsDbTable. Entries can be created/deleted in this table by management application action." INDEX { neIndex, f3VrfIndex, f3VrfOspfRouterIndex, f3L3TrafficOspfAsLsDbType, f3L3TrafficOspfAsLsDbId, f3L3TrafficOspfAsLsDbRouterId } ::= { f3L3TrafficOspfAsLsDbTable 1 } F3L3TrafficOspfAsLsDbEntry ::= SEQUENCE { f3L3TrafficOspfAsLsDbType OspfAsLsaType, f3L3TrafficOspfAsLsDbId IpAddress, f3L3TrafficOspfAsLsDbRouterId IpAddress, f3L3TrafficOspfAsLsDbChecksum Unsigned32, f3L3TrafficOspfAsLsDbSeqNum Unsigned32, f3L3TrafficOspfAsLsDbAge Unsigned32 } f3L3TrafficOspfAsLsDbType OBJECT-TYPE SYNTAX OspfAsLsaType MAX-ACCESS not-accessible STATUS current DESCRIPTION "LSA Type." ::= { f3L3TrafficOspfAsLsDbEntry 1 } f3L3TrafficOspfAsLsDbId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Link State ID." ::= { f3L3TrafficOspfAsLsDbEntry 2 } f3L3TrafficOspfAsLsDbRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "LSA advertising router." ::= { f3L3TrafficOspfAsLsDbEntry 3 } f3L3TrafficOspfAsLsDbChecksum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The checksum associated with Link State Advertisement." ::= { f3L3TrafficOspfAsLsDbEntry 4 } f3L3TrafficOspfAsLsDbSeqNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Sequence Number associated with the last LSA." ::= { f3L3TrafficOspfAsLsDbEntry 5 } f3L3TrafficOspfAsLsDbAge OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The age, in seconds, since this LSA was last received." ::= { f3L3TrafficOspfAsLsDbEntry 6 } -- -- L3 Traffic Ospf Link State Database -- f3L3TrafficOspfLsDbTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficOspfLsDbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OSPF Link State database. Must set f3VrfOspfRouterAction as optimizeOspfLsDbRetrieve(2) before get data from this table." ::= { f3L3Objects 22 } f3L3TrafficOspfLsDbEntry OBJECT-TYPE SYNTAX F3L3TrafficOspfLsDbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficOspfLsDbTable. Entries can be created/deleted in this table by management application action." INDEX { neIndex, f3VrfIndex, f3VrfOspfRouterIndex, f3L3TrafficOspfLsDbType, f3L3TrafficOspfLsDbId, f3L3TrafficOspfLsDbRouterId, f3L3TrafficOspfLsDbAreaId } ::= { f3L3TrafficOspfLsDbTable 1 } F3L3TrafficOspfLsDbEntry ::= SEQUENCE { f3L3TrafficOspfLsDbType OspfLsaType, f3L3TrafficOspfLsDbId IpAddress, f3L3TrafficOspfLsDbRouterId IpAddress, f3L3TrafficOspfLsDbAreaId IpAddress, f3L3TrafficOspfLsDbChecksum Unsigned32, f3L3TrafficOspfLsDbSeqNum Unsigned32, f3L3TrafficOspfLsDbAge Unsigned32 } f3L3TrafficOspfLsDbType OBJECT-TYPE SYNTAX OspfLsaType MAX-ACCESS not-accessible STATUS current DESCRIPTION "LSA Type." ::= { f3L3TrafficOspfLsDbEntry 1 } f3L3TrafficOspfLsDbId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Link State ID." ::= { f3L3TrafficOspfLsDbEntry 2 } f3L3TrafficOspfLsDbRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Advertising Router ID." ::= { f3L3TrafficOspfLsDbEntry 3 } f3L3TrafficOspfLsDbAreaId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Area ID." ::= { f3L3TrafficOspfLsDbEntry 4 } f3L3TrafficOspfLsDbChecksum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The checksum associated with Link State Advertisement." ::= { f3L3TrafficOspfLsDbEntry 5 } f3L3TrafficOspfLsDbSeqNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Sequence Number associated with the last LSA." ::= { f3L3TrafficOspfLsDbEntry 6 } f3L3TrafficOspfLsDbAge OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The age, in seconds, since this LSA was last received." ::= { f3L3TrafficOspfLsDbEntry 7 } -- -- L3 Traffic Ospf Neighbor -- f3L3TrafficOspfNeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficOspfNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OSPF neighbor table. Must set f3VrfOspfRouterAction as optimizeOspfNeighborRetrieve(3) before get data from this table." ::= { f3L3Objects 23 } f3L3TrafficOspfNeighborEntry OBJECT-TYPE SYNTAX F3L3TrafficOspfNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficOspfNeighborTable. Entries can be created/deleted in this table by management application action." INDEX { neIndex, f3VrfIndex, f3VrfOspfRouterIndex, f3L3TrafficOspfNeighborIpAddress } ::= { f3L3TrafficOspfNeighborTable 1 } F3L3TrafficOspfNeighborEntry ::= SEQUENCE { f3L3TrafficOspfNeighborIpAddress IpAddress, f3L3TrafficOspfNeighborInterface VariablePointer, f3L3TrafficOspfNeighborRouterId IpAddress, f3L3TrafficOspfNeighborState OspfAdjacencyState, f3L3TrafficOspfNeighborRole TrafficOspfRole, f3L3TrafficOspfNeighborPriority Unsigned32, f3L3TrafficOspfNeighborDeadTime Unsigned32, f3L3TrafficOspfNeighborLocalInterfaceName DisplayString } f3L3TrafficOspfNeighborIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Address of interface of neighbor." ::= { f3L3TrafficOspfNeighborEntry 1 } f3L3TrafficOspfNeighborInterface OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The local interface which discovers the neighbor." ::= { f3L3TrafficOspfNeighborEntry 2 } f3L3TrafficOspfNeighborRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Router ID of the neighbor." ::= { f3L3TrafficOspfNeighborEntry 3 } f3L3TrafficOspfNeighborState OBJECT-TYPE SYNTAX OspfAdjacencyState MAX-ACCESS read-only STATUS current DESCRIPTION "State of Link State Database synchronization with the neighbor." ::= { f3L3TrafficOspfNeighborEntry 4 } f3L3TrafficOspfNeighborRole OBJECT-TYPE SYNTAX TrafficOspfRole MAX-ACCESS read-only STATUS current DESCRIPTION "Role of the neighbor. DR, DR other and Backup are applicable." ::= { f3L3TrafficOspfNeighborEntry 5 } f3L3TrafficOspfNeighborPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of the neighbor." ::= { f3L3TrafficOspfNeighborEntry 6 } f3L3TrafficOspfNeighborDeadTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Dead Time field indicates the amount of time remaining that the router waits to receive an OSPF hello packet from the neighbor before declaring the neighbor down." ::= { f3L3TrafficOspfNeighborEntry 7 } f3L3TrafficOspfNeighborLocalInterfaceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of local interface which discovers the neighbor." ::= { f3L3TrafficOspfNeighborEntry 8 } -- -- L3 traffic ip interface Ospf Table -- f3L3TrafficIPInterfaceOspfTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIPInterfaceOspfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OSPF Traffic IP Interface Attributes." ::= { f3L3Objects 25 } f3L3TrafficIPInterfaceOspfEntry OBJECT-TYPE SYNTAX F3L3TrafficIPInterfaceOspfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficIPInterfaceOspfTable." AUGMENTS { f3L3TrafficIPInterfaceEntry } ::= { f3L3TrafficIPInterfaceOspfTable 1 } F3L3TrafficIPInterfaceOspfEntry ::= SEQUENCE { f3L3TrafficIPIfOspfAreaId IpAddress, f3L3TrafficIPIfOspfCost Unsigned32, f3L3TrafficIPIfOspfIfType OspfIfType, f3L3TrafficIPIfOspfRtrPriority Unsigned32, f3L3TrafficIPIfOspfHelloInterval Unsigned32, f3L3TrafficIPIfOspfDeadInterval Unsigned32, f3L3TrafficIPIfOspfTransmitDelay Unsigned32, f3L3TrafficIPIfOspfRetransmitInterval Unsigned32, f3L3TrafficIPIfOspfState OspfInterfaceState, f3L3TrafficIPIfOspfDesignatedRouterId IpAddress, f3L3TrafficIPIfOspfBackupDesignatedRouterId IpAddress, f3L3TrafficIPIfOspfAuthType OspfAuthType, f3L3TrafficIPIfOspfSimpleAuthKey DisplayString, f3L3TrafficIPIfospfCryptoKeyId VariablePointer } f3L3TrafficIPIfOspfAreaId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A 32-bit number identifying the area." ::= { f3L3TrafficIPInterfaceOspfEntry 1 } f3L3TrafficIPIfOspfCost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The cost of the route during the SPF calculation." ::= { f3L3TrafficIPInterfaceOspfEntry 2 } f3L3TrafficIPIfOspfIfType OBJECT-TYPE SYNTAX OspfIfType MAX-ACCESS read-write STATUS current DESCRIPTION "Interface network type." ::= { f3L3TrafficIPInterfaceOspfEntry 3 } f3L3TrafficIPIfOspfRtrPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "An 8-bit unsigned integer, used for DR and BDR election, may be default. 0 means not to attend DR election." ::= { f3L3TrafficIPInterfaceOspfEntry 4 } f3L3TrafficIPIfOspfHelloInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The interval in seconds between Hello Packets that the router sends on the interface." ::= { f3L3TrafficIPInterfaceOspfEntry 5 } f3L3TrafficIPIfOspfDeadInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds before the router's neighbors will declare it down, when they stop hearing the router's Hello Packets." ::= { f3L3TrafficIPInterfaceOspfEntry 6 } f3L3TrafficIPIfOspfTransmitDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "2~65535 Default 2s The estimated number of seconds it takes to transmit a Link State Update Packet over this interface. LSAs contained in the Link State update packet will have their age incremented by this amount before transmission. This value should take into account transmission and propagation delays; it must be greater than 1." ::= { f3L3TrafficIPInterfaceOspfEntry 7 } f3L3TrafficIPIfOspfRetransmitInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds between LSA retransmissions, for adjacencies belonging to this interface. Also used when retransmitting Database Description and Link State Request Packets." ::= { f3L3TrafficIPInterfaceOspfEntry 8 } f3L3TrafficIPIfOspfState OBJECT-TYPE SYNTAX OspfInterfaceState MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF Interface state." ::= { f3L3TrafficIPInterfaceOspfEntry 9 } f3L3TrafficIPIfOspfDesignatedRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Designated Router IP interface on the Network." ::= { f3L3TrafficIPInterfaceOspfEntry 10 } f3L3TrafficIPIfOspfBackupDesignatedRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Backup Designated Router IP interface on the Network." ::= { f3L3TrafficIPInterfaceOspfEntry 11 } f3L3TrafficIPIfOspfAuthType OBJECT-TYPE SYNTAX OspfAuthType MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to specify authentication type. Simple: 64-bits clear password inserted into OSPF packets header. None: No authentication is used. Cryptographic: a shared secret which enables the generation/verification of message digests which are appended to the OSPF protocol packets." ::= { f3L3TrafficIPInterfaceOspfEntry 12 } f3L3TrafficIPIfOspfSimpleAuthKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication key." ::= { f3L3TrafficIPInterfaceOspfEntry 13 } f3L3TrafficIPIfospfCryptoKeyId OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "Crypto key Id." ::= { f3L3TrafficIPInterfaceOspfEntry 14 } -- -- L3 traffic ipv6 interface Table -- f3L3TrafficIPv6InterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIPv6InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the L3 Traffic IPv6 Interface." ::= { f3L3Objects 26 } f3L3TrafficIPv6InterfaceEntry OBJECT-TYPE SYNTAX F3L3TrafficIPv6InterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficIPv6InterfaceTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPv6IfIndex } ::= { f3L3TrafficIPv6InterfaceTable 1 } F3L3TrafficIPv6InterfaceEntry ::= SEQUENCE { f3L3TrafficIPv6IfIndex Integer32, f3L3TrafficIPv6IfName DisplayString, f3L3TrafficIPv6IfAdminState AdminState, f3L3TrafficIPv6IfSecondaryState SecondaryState, f3L3TrafficIPv6IfOperationalState OperationalState, f3L3TrafficIPv6IfType IpInterfaceType, f3L3TrafficIPv6IfLinkLocalAddr Ipv6Address, f3L3TrafficIPv6IfLinkLocalAddrMode Ipv6LinkLocalAddressMode, f3L3TrafficIPv6IfMtu Integer32, f3L3TrafficIPv6IfStatelessAddrAutoconfigEnabled TruthValue, f3L3TrafficIPv6IfDefaultGateway Ipv6Address, f3L3TrafficIPv6IfIcmpErrorMsgRateLimit Integer32, f3L3TrafficIPv6IfDhcpRole CmDhcpRole, f3L3TrafficIPv6IfDhcpEnabled TruthValue, f3L3TrafficIPv6IfDhcpRapidCommitControlEnabled TruthValue, f3L3TrafficIPv6IfMaxRAInterval Unsigned32, f3L3TrafficIPv6IfMinRAInterval Unsigned32, f3L3TrafficIPv6IfRouterLifeTime Unsigned32, f3L3TrafficIPv6IfReachableTime Unsigned32, f3L3TrafficIPv6IfRaDhcpMoreConfigEnabled TruthValue, f3L3TrafficIPv6IfRaManagedAddressConfigEnabled TruthValue, f3L3TrafficIPv6IfRaRDNSSOptionEnabled TruthValue, f3L3TrafficIPv6IfRaRDNSSLifeTime Unsigned32, f3L3TrafficIPv6IfRaDNSSList DisplayString, f3L3TrafficIPv6IfRaDefaultRouterPreference NdpRaDefaultRouterPreference, f3L3TrafficIPv6IfDupAddrDetectControl TruthValue, f3L3TrafficIPv6IfDupAddrDetectTransmits Unsigned32, f3L3TrafficIPv6IfDupAddrDetectRetransTimer Unsigned32, f3L3TrafficIPv6IfStorageType StorageType, f3L3TrafficIPv6IfRowStatus RowStatus, f3L3TrafficIPv6IfAction TrafficIpv6InterfaceActionType } f3L3TrafficIPv6IfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "It specifies the traffic IPv6 interface number." ::= { f3L3TrafficIPv6InterfaceEntry 1 } f3L3TrafficIPv6IfName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "It specifies the traffic IPv6 interface name." ::= { f3L3TrafficIPv6InterfaceEntry 2 } f3L3TrafficIPv6IfAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the interface." ::= { f3L3TrafficIPv6InterfaceEntry 3 } f3L3TrafficIPv6IfSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the interface." ::= { f3L3TrafficIPv6InterfaceEntry 4 } f3L3TrafficIPv6IfOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the interface." ::= { f3L3TrafficIPv6InterfaceEntry 5 } f3L3TrafficIPv6IfType OBJECT-TYPE SYNTAX IpInterfaceType MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the type of the interface." ::= { f3L3TrafficIPv6InterfaceEntry 6 } f3L3TrafficIPv6IfLinkLocalAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "Link-local Address." ::= { f3L3TrafficIPv6InterfaceEntry 7 } f3L3TrafficIPv6IfLinkLocalAddrMode OBJECT-TYPE SYNTAX Ipv6LinkLocalAddressMode MAX-ACCESS read-write STATUS current DESCRIPTION "The assignment mode of IPv6 Link-Local Address, only manual and automatic are applicable." ::= { f3L3TrafficIPv6InterfaceEntry 8 } f3L3TrafficIPv6IfMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the MTU for IPv6 Traffic interface." ::= { f3L3TrafficIPv6InterfaceEntry 9 } f3L3TrafficIPv6IfStatelessAddrAutoconfigEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This is the control to enable or disable stateless address auto configuration." ::= { f3L3TrafficIPv6InterfaceEntry 10 } f3L3TrafficIPv6IfDefaultGateway OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "indicates active default GW of the interface." ::= { f3L3TrafficIPv6InterfaceEntry 11 } f3L3TrafficIPv6IfIcmpErrorMsgRateLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "limit originated ICMP error messages rate in number of messages per second. The value 0xFFFF shall be used to indicate no error message limit." ::= { f3L3TrafficIPv6InterfaceEntry 12 } f3L3TrafficIPv6IfDhcpRole OBJECT-TYPE SYNTAX CmDhcpRole MAX-ACCESS read-write STATUS current DESCRIPTION "Allows setting the DHCPv6 role on this interface." ::= { f3L3TrafficIPv6InterfaceEntry 13 } f3L3TrafficIPv6IfDhcpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allows enabling/disabling of DHCPv6 on this interface." ::= { f3L3TrafficIPv6InterfaceEntry 14 } f3L3TrafficIPv6IfDhcpRapidCommitControlEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This is the control to enable or disable DHCP rapid commit." ::= { f3L3TrafficIPv6InterfaceEntry 15 } f3L3TrafficIPv6IfMaxRAInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum time in seconds between generated RA messages." ::= { f3L3TrafficIPv6InterfaceEntry 16 } f3L3TrafficIPv6IfMinRAInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum time in seconds between generated RA messages, should be less than 0.75* max-ra-interval." ::= { f3L3TrafficIPv6InterfaceEntry 17 } f3L3TrafficIPv6IfRouterLifeTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Time in seconds the router can be used as a default router, should be larger than max-ra-interval." ::= { f3L3TrafficIPv6InterfaceEntry 18 } f3L3TrafficIPv6IfReachableTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "time in milliseconds, that a node assumes a neighbor is reachable after having received a reachability confirmation, 0 means unspecified." ::= { f3L3TrafficIPv6InterfaceEntry 19 } f3L3TrafficIPv6IfRaDhcpMoreConfigEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "RA More configurations via DHCP." ::= { f3L3TrafficIPv6InterfaceEntry 20 } f3L3TrafficIPv6IfRaManagedAddressConfigEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "RA Managed Address Config Control." ::= { f3L3TrafficIPv6InterfaceEntry 21 } f3L3TrafficIPv6IfRaRDNSSOptionEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Control Recursive DNS server option presence in the RA messages." ::= { f3L3TrafficIPv6InterfaceEntry 22 } f3L3TrafficIPv6IfRaRDNSSLifeTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set the Lifetime field of the RDNSS option." ::= { f3L3TrafficIPv6InterfaceEntry 23 } f3L3TrafficIPv6IfRaDNSSList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "list of IPv6 addresses of DNS servers." ::= { f3L3TrafficIPv6InterfaceEntry 24 } f3L3TrafficIPv6IfRaDefaultRouterPreference OBJECT-TYPE SYNTAX NdpRaDefaultRouterPreference MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies Default Router preference field in RA according to RFC4191." ::= { f3L3TrafficIPv6InterfaceEntry 25 } f3L3TrafficIPv6IfDupAddrDetectControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Allows enabling/disabling of DAD on this interface." ::= { f3L3TrafficIPv6InterfaceEntry 26 } f3L3TrafficIPv6IfDupAddrDetectTransmits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specify number of consequent NS messages sent by this interface." ::= { f3L3TrafficIPv6InterfaceEntry 27 } f3L3TrafficIPv6IfDupAddrDetectRetransTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Interval in ms between consecutive NS messages and as well as the time a node waits after sending the last NS before ending the DAD." ::= { f3L3TrafficIPv6InterfaceEntry 28 } f3L3TrafficIPv6IfStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3L3TrafficIPv6InterfaceEntry 29 } f3L3TrafficIPv6IfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIPv6IfRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIPv6IfRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIPv6IfRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficIPv6InterfaceEntry 30 } f3L3TrafficIPv6IfAction OBJECT-TYPE SYNTAX TrafficIpv6InterfaceActionType MAX-ACCESS read-write STATUS current DESCRIPTION "This objects describes action set on this traffic ip interface." ::= { f3L3TrafficIPv6InterfaceEntry 31 } -- -- L3 traffic ipv6 Address Table -- f3L3TrafficIPv6AddressTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIPv6AddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Traffic IPv6 interface address table." ::= { f3L3Objects 27 } f3L3TrafficIPv6AddressEntry OBJECT-TYPE SYNTAX F3L3TrafficIPv6AddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficIPv6AddressTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPv6IfIndex, f3L3TrafficIPv6AddrIndex } ::= { f3L3TrafficIPv6AddressTable 1 } F3L3TrafficIPv6AddressEntry ::= SEQUENCE { f3L3TrafficIPv6AddrIndex Integer32, f3L3TrafficIPv6AddrAssignMode Ipv6AddressAssignMode, f3L3TrafficIPv6AddrUnicastAddr Ipv6Address, f3L3TrafficIPv6AddrUnicastAddrPrefixLength Integer32, f3L3TrafficIPv6AddrUnicastAddrAutoGenPrefix DisplayString, f3L3TrafficIPv6AddrStorageType StorageType, f3L3TrafficIPv6AddrRowStatus RowStatus } f3L3TrafficIPv6AddrIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique integer index value corresponding to a traffic ipv6 interface unicast address." ::= { f3L3TrafficIPv6AddressEntry 1 } f3L3TrafficIPv6AddrAssignMode OBJECT-TYPE SYNTAX Ipv6AddressAssignMode MAX-ACCESS read-write STATUS current DESCRIPTION "The assignment mode of IPv6 Unicast Address." ::= { f3L3TrafficIPv6AddressEntry 2 } f3L3TrafficIPv6AddrUnicastAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This is IPv6 Unicast Address." ::= { f3L3TrafficIPv6AddressEntry 3 } f3L3TrafficIPv6AddrUnicastAddrPrefixLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This is prefix length of the unicast address." ::= { f3L3TrafficIPv6AddressEntry 4 } f3L3TrafficIPv6AddrUnicastAddrAutoGenPrefix OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This is prefix of the unicast address in automatic address assignment mode." ::= { f3L3TrafficIPv6AddressEntry 5 } f3L3TrafficIPv6AddrStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3L3TrafficIPv6AddressEntry 6 } f3L3TrafficIPv6AddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIPv6AddrRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIPv6AddrRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIPv6AddrRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficIPv6AddressEntry 7 } -- -- L3 traffic ipv6 Prefix Table -- f3L3TrafficIPv6PrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIPv6PrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Traffic IPv6 RA prefix table." ::= { f3L3Objects 28 } f3L3TrafficIPv6PrefixEntry OBJECT-TYPE SYNTAX F3L3TrafficIPv6PrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in f3L3TrafficIPv6PrefixTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPv6IfIndex, f3L3TrafficIPv6PrefixIndex } ::= { f3L3TrafficIPv6PrefixTable 1 } F3L3TrafficIPv6PrefixEntry ::= SEQUENCE { f3L3TrafficIPv6PrefixIndex Integer32, f3L3TrafficIPv6PrefixRaPrefixAdvEnabled TruthValue, f3L3TrafficIPv6PrefixRaPrefix Ipv6Address, f3L3TrafficIPv6PrefixRaPrefixLength Integer32, f3L3TrafficIPv6PrefixValidLifeTime Unsigned32, f3L3TrafficIPv6PrefixPreferredLifeTime Unsigned32, f3L3TrafficIPv6PrefixStorageType StorageType, f3L3TrafficIPv6PrefixRowStatus RowStatus } f3L3TrafficIPv6PrefixIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique integer index value corresponding to a traffic ipv6 interface ra prefix." ::= { f3L3TrafficIPv6PrefixEntry 1 } f3L3TrafficIPv6PrefixRaPrefixAdvEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is to enable to Advertise prefix to link in router mode." ::= { f3L3TrafficIPv6PrefixEntry 2 } f3L3TrafficIPv6PrefixRaPrefix OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This is the IPv6 Prefix to be dispatched to the link in Router mode." ::= { f3L3TrafficIPv6PrefixEntry 3 } f3L3TrafficIPv6PrefixRaPrefixLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Prefix length." ::= { f3L3TrafficIPv6PrefixEntry 4 } f3L3TrafficIPv6PrefixValidLifeTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to specify fixed Valid lifetime of distributed prefix in seconds All ones may be set for unlimited lifetime." ::= { f3L3TrafficIPv6PrefixEntry 5 } f3L3TrafficIPv6PrefixPreferredLifeTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to specify fixed time interval for unrestricted use of prefix. When this time has been expired the address is considered as deprecated as specified in RFC4862 Preferred lifetime shall not be greater than the Valid Lifetime. All ones may be set for unlimited lifetime." ::= { f3L3TrafficIPv6PrefixEntry 6 } f3L3TrafficIPv6PrefixStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3L3TrafficIPv6PrefixEntry 7 } f3L3TrafficIPv6PrefixRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIPv6PrefixRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIPv6PrefixRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIPv6PrefixRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficIPv6PrefixEntry 8 } -- -- L3 traffic ipv6 Ndp Table -- f3L3TrafficIPv6NdpTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIPv6NdpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Traffic IPv6 NDP table." ::= { f3L3Objects 29 } f3L3TrafficIPv6NdpEntry OBJECT-TYPE SYNTAX F3L3TrafficIPv6NdpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in f3L3TrafficIPv6NdpTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPv6IfIndex, f3L3TrafficIPv6NdpIPv6Addr } ::= { f3L3TrafficIPv6NdpTable 1 } F3L3TrafficIPv6NdpEntry ::= SEQUENCE { f3L3TrafficIPv6NdpIPv6Addr Ipv6Address, f3L3TrafficIPv6NdpInterface DisplayString, f3L3TrafficIPv6NdpMacAddress MacAddress, f3L3TrafficIPv6NdpType IpEntryType, f3L3TrafficIPv6NdpReachabilityState NdpNeighborReachabilityState, f3L3TrafficIPv6NdpAge Integer32, f3L3TrafficIPv6NdpStorageType StorageType, f3L3TrafficIPv6NdpRowStatus RowStatus } f3L3TrafficIPv6NdpIPv6Addr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the IP address of the NDP Entry." ::= { f3L3TrafficIPv6NdpEntry 1 } f3L3TrafficIPv6NdpInterface OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the IP interface for the NDP Entry." ::= { f3L3TrafficIPv6NdpEntry 2 } f3L3TrafficIPv6NdpMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This is the MAC address of the NDP Entry." ::= { f3L3TrafficIPv6NdpEntry 3 } f3L3TrafficIPv6NdpType OBJECT-TYPE SYNTAX IpEntryType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of NDP Entry. Note that static entries can be created." ::= { f3L3TrafficIPv6NdpEntry 4 } f3L3TrafficIPv6NdpReachabilityState OBJECT-TYPE SYNTAX NdpNeighborReachabilityState MAX-ACCESS read-only STATUS current DESCRIPTION "This is the reachability state of the NDP Entry." ::= { f3L3TrafficIPv6NdpEntry 5 } f3L3TrafficIPv6NdpAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates entry age in seconds." ::= { f3L3TrafficIPv6NdpEntry 6 } f3L3TrafficIPv6NdpStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3L3TrafficIPv6NdpEntry 7 } f3L3TrafficIPv6NdpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIPv6NdpRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIPv6NdpRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIPv6NdpRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficIPv6NdpEntry 8 } -- -- L3 taffic ipv6 route Table -- f3L3TrafficIpv6RouteTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIpv6RouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the L3 Traffic Ipv6 route. Must set f3VrfActionX as optimizeIpv6RouteRetrieve(7) before get data from this table." ::= { f3L3Objects 30 } f3L3TrafficIpv6RouteEntry OBJECT-TYPE SYNTAX F3L3TrafficIpv6RouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficIpv6RouteTable." INDEX { neIndex, f3VrfIndex, f3L3TrafficIpv6RouteDest, f3L3TrafficIpv6RoutePrefixLength, f3L3TrafficIpv6RouteGateway, f3L3TrafficIpv6RouteInterface } ::= { f3L3TrafficIpv6RouteTable 1 } F3L3TrafficIpv6RouteEntry ::= SEQUENCE { f3L3TrafficIpv6RouteDest Ipv6Address, f3L3TrafficIpv6RoutePrefixLength Integer32, f3L3TrafficIpv6RouteGateway Ipv6Address, f3L3TrafficIpv6RouteInterface DisplayString, f3L3TrafficIpv6RouteMetric Integer32, f3L3TrafficIpv6RouteType IpEntryType, f3L3TrafficIpv6RouteAdvertise TruthValue, f3L3TrafficIpv6RouteStatus TrafficIpRouteStatus, f3L3TrafficIpv6RouteFlags RouteFlags, f3L3TrafficIpv6RouteOrigin TrafficIpRouteOriginType, f3L3TrafficIpv6RouteStorageType StorageType, f3L3TrafficIpv6RouteRowStatus RowStatus } f3L3TrafficIpv6RouteDest OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the static-route-mask attribute is not equal to x." ::= { f3L3TrafficIpv6RouteEntry 1 } f3L3TrafficIpv6RoutePrefixLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicate the mask to be logically ANDed with the destination address before being compared to the value in the cmStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the static route mask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical AND of x with the value of the corresponding instance of the static-route-dest attribute is not equal to static route destination." ::= { f3L3TrafficIpv6RouteEntry 2 } f3L3TrafficIpv6RouteGateway OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the next router en route." ::= { f3L3TrafficIpv6RouteEntry 3 } f3L3TrafficIpv6RouteInterface OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the IP interface for the interface static route." ::= { f3L3TrafficIpv6RouteEntry 4 } f3L3TrafficIpv6RouteMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's cmStaticRouteProto value. If this metric is not used, its value should be set to 1." ::= { f3L3TrafficIpv6RouteEntry 5 } f3L3TrafficIpv6RouteType OBJECT-TYPE SYNTAX IpEntryType MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates it is dynamic or static route." ::= { f3L3TrafficIpv6RouteEntry 6 } f3L3TrafficIpv6RouteAdvertise OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether this static route will be advertised via routing protocol." ::= { f3L3TrafficIpv6RouteEntry 7 } f3L3TrafficIpv6RouteStatus OBJECT-TYPE SYNTAX TrafficIpRouteStatus MAX-ACCESS read-only STATUS current DESCRIPTION "It specifies the traffic Ipv6 route status." ::= { f3L3TrafficIpv6RouteEntry 8 } f3L3TrafficIpv6RouteFlags OBJECT-TYPE SYNTAX RouteFlags MAX-ACCESS read-only STATUS current DESCRIPTION "It specifies the traffic Ipv6 route flags." ::= { f3L3TrafficIpv6RouteEntry 9 } f3L3TrafficIpv6RouteOrigin OBJECT-TYPE SYNTAX TrafficIpRouteOriginType MAX-ACCESS read-only STATUS current DESCRIPTION "The origin of IP Route." ::= { f3L3TrafficIpv6RouteEntry 10 } f3L3TrafficIpv6RouteStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3L3TrafficIpv6RouteEntry 11 } f3L3TrafficIpv6RouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIpv6RouteRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIpv6RouteRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIpv6RouteRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficIpv6RouteEntry 12 } -- -- DHCP V6 Relay Agent Table -- f3DhcpV6RelayAgentTable OBJECT-TYPE SYNTAX SEQUENCE OF F3DhcpV6RelayAgentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the Dhcp V6 Relay Agent." ::= { f3L3Objects 31 } f3DhcpV6RelayAgentEntry OBJECT-TYPE SYNTAX F3DhcpV6RelayAgentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3DhcpV6RelayAgentTable." INDEX { neIndex, f3DhcpV6RelayAgentIndex } ::= { f3DhcpV6RelayAgentTable 1 } F3DhcpV6RelayAgentEntry ::= SEQUENCE { f3DhcpV6RelayAgentIndex Integer32, f3DhcpV6RelayAgentAlias F3DisplayString, f3DhcpV6RelayAgentAdminState AdminState, f3DhcpV6RelayAgentSecondaryState SecondaryState, f3DhcpV6RelayAgentOperationalState OperationalState, f3DhcpV6RelayAgentServerIpAddress Ipv6Address, f3DhcpV6RelayAgentServerIpInteface VariablePointer, f3DhcpV6RelayAgentStorageType StorageType, f3DhcpV6RelayAgentRowStatus RowStatus } f3DhcpV6RelayAgentIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The integer index value describes the dhcp-relay-agent index." ::= { f3DhcpV6RelayAgentEntry 1 } f3DhcpV6RelayAgentAlias OBJECT-TYPE SYNTAX F3DisplayString (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The DHCP relay agent alias." ::= { f3DhcpV6RelayAgentEntry 2 } f3DhcpV6RelayAgentAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the agent." ::= { f3DhcpV6RelayAgentEntry 3 } f3DhcpV6RelayAgentSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the agent." ::= { f3DhcpV6RelayAgentEntry 4 } f3DhcpV6RelayAgentOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the agent." ::= { f3DhcpV6RelayAgentEntry 5 } f3DhcpV6RelayAgentServerIpAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "The Ipv6 address of this DCHP relay agent." ::= { f3DhcpV6RelayAgentEntry 6 } f3DhcpV6RelayAgentServerIpInteface OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the server Ip Interface." ::= { f3DhcpV6RelayAgentEntry 7 } f3DhcpV6RelayAgentStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3DhcpV6RelayAgentEntry 8 } f3DhcpV6RelayAgentRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3DhcpV6RelayAgentRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3DhcpV6RelayAgentRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3DhcpV6RelayAgentRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3DhcpV6RelayAgentEntry 9 } -- -- -- f3DhcpV6RelayAgentClientTrafficIpIfMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF F3DhcpV6RelayAgentClientTrafficIpIfMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the Dhcp V6 Relay Agent Client Traffic Ip Interface member." ::= { f3L3Objects 32 } f3DhcpV6RelayAgentClientTrafficIpIfMemberEntry OBJECT-TYPE SYNTAX F3DhcpV6RelayAgentClientTrafficIpIfMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3DhcpV6RelayAgentClientTrafficIpIfMemberTable." INDEX { neIndex, f3DhcpV6RelayAgentIndex, f3DhcpV6RelayAgentClientTrafficIpIfMemberObject } ::= { f3DhcpV6RelayAgentClientTrafficIpIfMemberTable 1 } F3DhcpV6RelayAgentClientTrafficIpIfMemberEntry ::= SEQUENCE { f3DhcpV6RelayAgentClientTrafficIpIfMemberObject VariablePointer, f3DhcpV6RelayAgentClientTrafficIpIfMemberStorageType StorageType, f3DhcpV6RelayAgentClientTrafficIpIfMemberRowStatus RowStatus } f3DhcpV6RelayAgentClientTrafficIpIfMemberObject OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object describes the Client traffic ip interface." ::= { f3DhcpV6RelayAgentClientTrafficIpIfMemberEntry 1 } f3DhcpV6RelayAgentClientTrafficIpIfMemberStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3DhcpV6RelayAgentClientTrafficIpIfMemberEntry 2 } f3DhcpV6RelayAgentClientTrafficIpIfMemberRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3DhcpV6RelayAgentClientTrafficIpIfMemberRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3DhcpV6RelayAgentClientTrafficIpIfMemberRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3DhcpV6RelayAgentClientTrafficIpIfMemberRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3DhcpV6RelayAgentClientTrafficIpIfMemberEntry 3 } -- -- cm L3 FlowPoint table. supported in XGPRO NIDs -- cmL3FlowPointTable OBJECT-TYPE SYNTAX SEQUENCE OF CML3FlowPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the L3 flowpoint." ::= { f3L3Objects 33 } cmL3FlowPointEntry OBJECT-TYPE SYNTAX CML3FlowPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmL3FlowPointTable." INDEX { neIndex, shelfIndex, slotIndex, cmL3FlowPointPortIndex, cmL3FlowPointIndex } ::= { cmL3FlowPointTable 1 } CML3FlowPointEntry ::= SEQUENCE { cmL3FlowPointPortIndex Integer32, cmL3FlowPointIndex Integer32, cmL3FlowPointAlias F3DisplayString, cmL3FlowPointAdminState AdminState, cmL3FlowPointSecondaryState SecondaryState, cmL3FlowPointOperationalState OperationalState, cmL3FlowPointMultiCOSEnabled TruthValue, cmL3FlowPointCOS Integer32, cmL3FlowPointUntaggedMemberShipEnabled TruthValue, cmL3FlowPointOuterTagMemberShipEnabled TruthValue, cmL3FlowPointOuterTagMemberShipVlanId VlanId, cmL3FlowPointInnerTagMemberShipEnabled TruthValue, cmL3FlowPointInnerTagMemberShipVlanId VlanId, cmL3FlowPointFragmentedPktsFwdEnabled TruthValue, cmL3FlowPointHCosMgmtEnabled TruthValue, cmL3FlowPointHCosGuaranteedBwHi Unsigned32, cmL3FlowPointHCosGuaranteedBwLo Unsigned32, cmL3FlowPointHCosMaximumBwHi Unsigned32, cmL3FlowPointHCosMaximumBwLo Unsigned32, cmL3FlowPointDscpOverwriteControl TruthValue, cmL3FlowPointPriMapProfile VariablePointer, cmL3FlowPointStorageType StorageType, cmL3FlowPointRowStatus RowStatus, cmL3FlowPointAclNoMatchDisposition AclNoMatchDispositionType, cmL3FlowPointWfqSegmentationCOS Integer32, cmL3FlowPointWfqGroupCOS Integer32, cmL3FlowPointWfqGroupEirLo Unsigned32, cmL3FlowPointWfqGroupEirHi Unsigned32, cmL3FlowPointEgressShapingType ShapingType } cmL3FlowPointPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port number value." ::= { cmL3FlowPointEntry 1 } cmL3FlowPointIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The L3 flow point number." ::= { cmL3FlowPointEntry 2 } cmL3FlowPointAlias OBJECT-TYPE SYNTAX F3DisplayString (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the L3 flow point alias." ::= { cmL3FlowPointEntry 3 } cmL3FlowPointAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object describes the L3 flow point admin state." ::= { cmL3FlowPointEntry 4 } cmL3FlowPointSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the L3 flow point secondary state." ::= { cmL3FlowPointEntry 5 } cmL3FlowPointOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the L3 flow point operational state." ::= { cmL3FlowPointEntry 6 } cmL3FlowPointMultiCOSEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Control to enable or disable per-COS BWPs on a FlowPoint. ENABLED:per-COS BWPs (CIR, EIR, CBS, EBS, CM, CF) are applied as a policing function for all ingress frames of this flowpoint. DISABLED:per-Flow BWP (CIR, EIR, CBS, EBS, CM, CF) is applied as a policing function for all ingress frames of this flowpoint. User must independently enable each COS BWP when ENABLED." ::= { cmL3FlowPointEntry 7 } cmL3FlowPointCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies the internal COS applied to all ingress frames of the flowpoint." ::= { cmL3FlowPointEntry 8 } cmL3FlowPointUntaggedMemberShipEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls untagged frames membership for the Flowpoint. ENABLED: Ingress untagged frame matches Flowpoint membership. DISABLED: Ingress untagged frame does not match Flowpoint membership." ::= { cmL3FlowPointEntry 9 } cmL3FlowPointOuterTagMemberShipEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls outer tag membership for the Flowpoint whether enabled." ::= { cmL3FlowPointEntry 10 } cmL3FlowPointOuterTagMemberShipVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls outer tag VlanId membership for the Flowpoint." ::= { cmL3FlowPointEntry 11 } cmL3FlowPointInnerTagMemberShipEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls inner tag membership for the Flowpoint whether enabled." ::= { cmL3FlowPointEntry 12 } cmL3FlowPointInnerTagMemberShipVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls inner tag VlanId membership for the Flowpoint." ::= { cmL3FlowPointEntry 13 } cmL3FlowPointFragmentedPktsFwdEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies whether received IP Packets with More Fragments flag should be forwarded by the FlowPoint." ::= { cmL3FlowPointEntry 14 } cmL3FlowPointHCosMgmtEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies whether the Hierarchical COS shaping enabled for this flow point." ::= { cmL3FlowPointEntry 15 } cmL3FlowPointHCosGuaranteedBwHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the Hierarchical COS guarranteed bandwidth high 32 bits for this flow point." ::= { cmL3FlowPointEntry 16 } cmL3FlowPointHCosGuaranteedBwLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the Hierarchical COS guarranteed bandwidth low 32 bits for this flow point." ::= { cmL3FlowPointEntry 17 } cmL3FlowPointHCosMaximumBwHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the Hierarchical COS maximum bandwidth high 32 bits for this flow point." ::= { cmL3FlowPointEntry 18 } cmL3FlowPointHCosMaximumBwLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute specifies the Hierarchical COS maximum bandwidth low 32 bits for this flow point." ::= { cmL3FlowPointEntry 19 } cmL3FlowPointDscpOverwriteControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute allows enable dscp value overwrite." ::= { cmL3FlowPointEntry 20 } cmL3FlowPointPriMapProfile OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute allows specify the priority map profile." ::= { cmL3FlowPointEntry 21 } cmL3FlowPointStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmL3FlowPointEntry 22 } cmL3FlowPointRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmL3FlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmL3FlowPointRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The cmL3FlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmL3FlowPointEntry 23 } cmL3FlowPointAclNoMatchDisposition OBJECT-TYPE SYNTAX AclNoMatchDispositionType MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute allows specify ACL no match disposition type" ::= { cmL3FlowPointEntry 24 } cmL3FlowPointWfqSegmentationCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify wfq segmentation COS value." ::= { cmL3FlowPointEntry 25 } cmL3FlowPointWfqGroupCOS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify wfq group COS value." ::= { cmL3FlowPointEntry 26 } cmL3FlowPointWfqGroupEirLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify wfq group EIR low 32 bits value." ::= { cmL3FlowPointEntry 27 } cmL3FlowPointWfqGroupEirHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to specify wfq group EIR high 32 bits value." ::= { cmL3FlowPointEntry 28 } cmL3FlowPointEgressShapingType OBJECT-TYPE SYNTAX ShapingType MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of Shaping Type for Flow Point" ::= { cmL3FlowPointEntry 29 } -- -- L3 Policer - used by Xgpro product line -- cmL3QosPolicerTable OBJECT-TYPE SYNTAX SEQUENCE OF CML3QosPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Quality of Service Policer for configuration purposes." ::= { f3L3Objects 34 } cmL3QosPolicerEntry OBJECT-TYPE SYNTAX CML3QosPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmL3QosPolicerTable. These entries represent a Quality of Service Policer." INDEX { neIndex, shelfIndex, slotIndex, cmL3FlowPointPortIndex, cmL3FlowPointIndex, cmL3QosPolicerIndex } ::= { cmL3QosPolicerTable 1 } CML3QosPolicerEntry ::= SEQUENCE { cmL3QosPolicerIndex Integer32, cmL3QosPolicerAdminState AdminState, cmL3QosPolicerOperationalState OperationalState, cmL3QosPolicerSecondaryState SecondaryState, cmL3QosPolicerCIRLo Unsigned32, cmL3QosPolicerCIRHi Unsigned32, cmL3QosPolicerEIRLo Unsigned32, cmL3QosPolicerEIRHi Unsigned32, cmL3QosPolicerCBS Integer32, cmL3QosPolicerEBS Integer32, cmL3QosPolicerAlgorithm PolicerAlgorithmType, cmL3QosPolicerColorMode PolicerColorMode, cmL3QosPolicerCouplingFlag TruthValue, cmL3QosPolicerCIRMaxHi Unsigned32, cmL3QosPolicerCIRMaxLo Unsigned32, cmL3QosPolicerEIRMaxHi Unsigned32, cmL3QosPolicerEIRMaxLo Unsigned32, cmL3QosPolicerEnvelopeObject VariablePointer, cmL3QosPolicerRank Integer32, cmL3QosPolicerPolicingEnabled TruthValue, cmL3QosPolicerStorageType StorageType, cmL3QosPolicerRowStatus RowStatus } cmL3QosPolicerIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-create STATUS current DESCRIPTION "The Policer Index that represents the COS level. This is applicable in case of a Multi COS flow. Index 1 represents COS 0; Index 2 represents COS 1 and so on. In release 5.6CC the range is extended to 1..16 to support duplicate N2A policers on a Flow. The duplicate policers are created under a Flow if network interface of the Flow is ERP Group or Split Horizon Group. In case of multi-cos Flow indices 1..8 represent policers of COS 0..7 going from Network 1 port; indices 9..16 represent policers for COS 0..7 going from Network 2 port. In case of single-cos Flow index 1 represents policer going from Network 1 port; index 9 represents policer going from Network 2 port. " ::= { cmL3QosPolicerEntry 1 } -- State Management params cmL3QosPolicerAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the QOS Flow Policer." ::= { cmL3QosPolicerEntry 2 } cmL3QosPolicerOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the QOS Flow Policer." ::= { cmL3QosPolicerEntry 3 } cmL3QosPolicerSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the QOS Flow Policer." ::= { cmL3QosPolicerEntry 4 } cmL3QosPolicerCIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the lower 32 bits of the CIR." ::= { cmL3QosPolicerEntry 5 } cmL3QosPolicerCIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the upper 32 bits of the CIR." ::= { cmL3QosPolicerEntry 6 } cmL3QosPolicerEIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the lower 32 bits of the EIR." ::= { cmL3QosPolicerEntry 7 } cmL3QosPolicerEIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the upper 32 bits of the EIR." ::= { cmL3QosPolicerEntry 8 } cmL3QosPolicerCBS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Commited Burst Size (CBS) on Policer." ::= { cmL3QosPolicerEntry 9 } cmL3QosPolicerEBS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of the Excess Burst Size (EBS) on the Policer." ::= { cmL3QosPolicerEntry 10 } cmL3QosPolicerAlgorithm OBJECT-TYPE SYNTAX PolicerAlgorithmType MAX-ACCESS read-only STATUS current DESCRIPTION "This object allows specification of Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking)." ::= { cmL3QosPolicerEntry 11 } cmL3QosPolicerColorMode OBJECT-TYPE SYNTAX PolicerColorMode MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'." ::= { cmL3QosPolicerEntry 12 } cmL3QosPolicerCouplingFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level." ::= { cmL3QosPolicerEntry 13 } cmL3QosPolicerCIRMaxHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the high 32 bits." ::= { cmL3QosPolicerEntry 14 } cmL3QosPolicerCIRMaxLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the lower 32 bits." ::= { cmL3QosPolicerEntry 15 } cmL3QosPolicerEIRMaxHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the high 32 bits." ::= { cmL3QosPolicerEntry 16 } cmL3QosPolicerEIRMaxLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the lower 32 bits." ::= { cmL3QosPolicerEntry 17 } cmL3QosPolicerEnvelopeObject OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of envelope object." ::= { cmL3QosPolicerEntry 18 } cmL3QosPolicerRank OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows specification of rank value." ::= { cmL3QosPolicerEntry 19 } cmL3QosPolicerPolicingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute allows enable or disable policers." ::= { cmL3QosPolicerEntry 20 } cmL3QosPolicerStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmL3QosPolicerEntry 21 } cmL3QosPolicerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmL3QosPolicerRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmL3QosPolicerRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmL3QosPolicerRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmL3QosPolicerEntry 22 } -- -- L3 Port Quality of Service Shaper -- cmL3QosShaperTable OBJECT-TYPE SYNTAX SEQUENCE OF CML3QosShaperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries corresponding to Ethernet Access Port Quality of Service Shaper for configuration purposes. These shapers can be managed when the Access Port is in evpl mode and are relevant for traffic in the network to access direction." ::= { f3L3Objects 35 } cmL3QosShaperEntry OBJECT-TYPE SYNTAX CML3QosShaperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmL3QosShaperTable. These entries represent a Quality of Service Shaper." INDEX { neIndex, shelfIndex, slotIndex, cmL3FlowPointPortIndex, cmL3FlowPointIndex, cmL3QosShaperIndex } ::= { cmL3QosShaperTable 1 } CML3QosShaperEntry ::= SEQUENCE { cmL3QosShaperIndex Integer32, cmL3QosShaperAdminState AdminState, cmL3QosShaperOperationalState OperationalState, cmL3QosShaperSecondaryState SecondaryState, cmL3QosShaperCIRLo Unsigned32, cmL3QosShaperCIRHi Unsigned32, cmL3QosShaperEIRLo Unsigned32, cmL3QosShaperEIRHi Unsigned32, cmL3QosShaperBufferSize Unsigned32, cmL3QosShaperCOS Integer32, cmL3QosShaperStorageType StorageType, cmL3QosShaperRowStatus RowStatus, cmL3QosShaperWfqWeight Integer32 } cmL3QosShaperIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The unique integer index value corresponding to a Quality of Service Shaper." ::= { cmL3QosShaperEntry 1 } -- State Management params cmL3QosShaperAdminState OBJECT-TYPE SYNTAX AdminState MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the Administrative State of the QOS Shaper." ::= { cmL3QosShaperEntry 2 } cmL3QosShaperOperationalState OBJECT-TYPE SYNTAX OperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Operational State of the QOS Shaper." ::= { cmL3QosShaperEntry 3 } cmL3QosShaperSecondaryState OBJECT-TYPE SYNTAX SecondaryState MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Secondary State of the QOS Shaper." ::= { cmL3QosShaperEntry 4 } cmL3QosShaperCIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Information Rate(CIR) (Lower 32 bits)of a Shaper." ::= { cmL3QosShaperEntry 5 } cmL3QosShaperCIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Commited Information Rate(CIR) (Higher 32 bits) of a Shaper." ::= { cmL3QosShaperEntry 6 } cmL3QosShaperEIRLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper." ::= { cmL3QosShaperEntry 7 } cmL3QosShaperEIRHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper." ::= { cmL3QosShaperEntry 8 } cmL3QosShaperBufferSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the Buffer Size of the Shaper." ::= { cmL3QosShaperEntry 9 } cmL3QosShaperCOS OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides the COS (Class of Service) value for the QOS Shaper." ::= { cmL3QosShaperEntry 10 } cmL3QosShaperStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { cmL3QosShaperEntry 11 } cmL3QosShaperRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmL3QosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmL3QosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmL3QosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { cmL3QosShaperEntry 12 } cmL3QosShaperWfqWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the wfq weight of the QoS Shaper." ::= { cmL3QosShaperEntry 13 } -- -- Traffic OSPF Interface Table -- f3L3TrafficOspfInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficOspfInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the Traffic OSPF Interface." ::= { f3L3Objects 36 } f3L3TrafficOspfInterfaceEntry OBJECT-TYPE SYNTAX F3L3TrafficOspfInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficOspfInterfaceTable." INDEX { neIndex, f3VrfIndex, f3VrfOspfRouterIndex, f3L3TrafficOspfAreaIndex, f3L3TrafficOspfInterfaceIndex } ::= { f3L3TrafficOspfInterfaceTable 1 } F3L3TrafficOspfInterfaceEntry ::= SEQUENCE { f3L3TrafficOspfInterfaceIndex Integer32, f3L3TrafficOspfInterfaceOspfCost Unsigned32, f3L3TrafficOspfInterfaceType OspfIfType, f3L3TrafficOspfInterfaceOspfRtrPriority Integer32, f3L3TrafficOspfInterfaceOspfHelloInterval Integer32, f3L3TrafficOspfInterfaceOspfDeadInterval Integer32, f3L3TrafficOspfInterfaceOspfTransmitDelay Integer32, f3L3TrafficOspfInterfaceOspfRetransmitInterval Integer32, f3L3TrafficOspfInterfaceState OspfInterfaceState, f3L3TrafficOspfInterfaceOspfDesignatedRouterId IpAddress, f3L3TrafficOspfInterfaceOspfBackupDesignatedRouterId IpAddress, f3L3TrafficOspfInterfaceOspfAuthType OspfAuthType, f3L3TrafficOspfInterfaceOspfSimpleAuthKey DisplayString, f3L3TrafficOspfInterfaceOspfCryptoKeyId VariablePointer, f3L3TrafficOspfInterfaceOspfInstanceId Unsigned32, f3L3TrafficOspfInterfaceId Unsigned32, f3L3TrafficOspfInterfaceLinkLsaSuppression TruthValue, f3L3TrafficOspfInterfacePassiveControl TruthValue, f3L3TrafficOspfInterfaceAssociatedIpInterface DisplayString, f3L3TrafficOspfInterfaceStorageType StorageType, f3L3TrafficOspfInterfaceRowStatus RowStatus, f3L3TrafficOspfInterfaceTilfaControl TruthValue, f3L3TrafficOspfInterfaceTilfaProtectionType TilfaProtectionType } f3L3TrafficOspfInterfaceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the Traffic OSPF Interface entry." ::= { f3L3TrafficOspfInterfaceEntry 1 } f3L3TrafficOspfInterfaceOspfCost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The cost of the route during the SPF calculation." ::= { f3L3TrafficOspfInterfaceEntry 2 } f3L3TrafficOspfInterfaceType OBJECT-TYPE SYNTAX OspfIfType MAX-ACCESS read-write STATUS current DESCRIPTION "Interface network type." ::= { f3L3TrafficOspfInterfaceEntry 3 } f3L3TrafficOspfInterfaceOspfRtrPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "An 8-bit unsigned integer, used for DR and BDR election, may be default. 0 means not to attend DR election." ::= { f3L3TrafficOspfInterfaceEntry 4 } f3L3TrafficOspfInterfaceOspfHelloInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The interval in seconds between Hello Packets that the router sends on the interface." ::= { f3L3TrafficOspfInterfaceEntry 5 } f3L3TrafficOspfInterfaceOspfDeadInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds before the router's neighbors will declare it down, when they stop hearing the router's Hello Packets." ::= { f3L3TrafficOspfInterfaceEntry 6 } f3L3TrafficOspfInterfaceOspfTransmitDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The estimated number of seconds it takes to transmit a Link State Update Packet over this interface. LSAs contained in the Link State update packet will have their age incremented by this amount before transmission. This value should take into account transmission and propagation delays; it must be greater than zero." ::= { f3L3TrafficOspfInterfaceEntry 7 } f3L3TrafficOspfInterfaceOspfRetransmitInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds between LSA retransmissions, for adjacencies belonging to this interface. Also used when retransmitting Database Description and Link State Request Packets." ::= { f3L3TrafficOspfInterfaceEntry 8 } f3L3TrafficOspfInterfaceState OBJECT-TYPE SYNTAX OspfInterfaceState MAX-ACCESS read-only STATUS current DESCRIPTION "The State of Interface in running OSPF protocol." ::= { f3L3TrafficOspfInterfaceEntry 9 } f3L3TrafficOspfInterfaceOspfDesignatedRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Designated Router IP interface on the Network." ::= { f3L3TrafficOspfInterfaceEntry 10 } f3L3TrafficOspfInterfaceOspfBackupDesignatedRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Backup Designated Router IP interface on the Network." ::= { f3L3TrafficOspfInterfaceEntry 11 } f3L3TrafficOspfInterfaceOspfAuthType OBJECT-TYPE SYNTAX OspfAuthType MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to specify authentication type. Simple: 64-bits clear password inserted into ospf packets header. None: No authentication is used. Cryptographic: a shared secret which enables the generation/verification of message digests which are appended to the OSPF protocol packets. IPsec: use IP layer's IPSec to support authentication, rather than OSPF header.." ::= { f3L3TrafficOspfInterfaceEntry 12 } f3L3TrafficOspfInterfaceOspfSimpleAuthKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Simple Authentication type authentication key (8 Bytes length)." ::= { f3L3TrafficOspfInterfaceEntry 13 } f3L3TrafficOspfInterfaceOspfCryptoKeyId OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-write STATUS current DESCRIPTION "Key id from the keys configured in the Authentication keys table. This key is used if Authentication Type is cryptographic." ::= { f3L3TrafficOspfInterfaceEntry 14 } f3L3TrafficOspfInterfaceOspfInstanceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "OSPFv3 Instance ID. Instance ID allows multiple OSPF protocol instances to be run on a single link. Default value is 0. It is only necessary to assign a value other than 0 on those links that will contain multiple separate communities of OSPF routers. Only Applicable to ospfv3." ::= { f3L3TrafficOspfInterfaceEntry 15 } f3L3TrafficOspfInterfaceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "32-bit number uniquely identifying this interface among the collection of this router's interfaces. Shall be unique per router. Default vlaue shall be the last number of EID. Only applicable to OSPFv3." ::= { f3L3TrafficOspfInterfaceEntry 16 } f3L3TrafficOspfInterfaceLinkLsaSuppression OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether or not origination of a link-LSA is suppressed. In OSPFv3, link LSAs are generated for each link, announcing link-local IPv6 address of the router to its local neighbors. These are useless on PtP or PtMP networks and this option allows to suppress the link LSA origination for such interfaces. The attribute is ignored on other than PtP or PtMP interfaces. Default value is disbaled. Only applicable to OSPFv3." ::= { f3L3TrafficOspfInterfaceEntry 17 } f3L3TrafficOspfInterfacePassiveControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable passive interface - a passive interface's prefix will be advertised but no neighbor adjacencies will be formed on the interface.." ::= { f3L3TrafficOspfInterfaceEntry 18 } f3L3TrafficOspfInterfaceAssociatedIpInterface OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The reference of Traffic IP Interface or loopback interface. It is the name of interface." ::= { f3L3TrafficOspfInterfaceEntry 19 } f3L3TrafficOspfInterfaceStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3L3TrafficOspfInterfaceEntry 20 } f3L3TrafficOspfInterfaceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficOspfInterfaceRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficOspfInterfaceRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficOspfInterfaceRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficOspfInterfaceEntry 21 } f3L3TrafficOspfInterfaceTilfaControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "TI-LFA Control." ::= { f3L3TrafficOspfInterfaceEntry 22 } f3L3TrafficOspfInterfaceTilfaProtectionType OBJECT-TYPE SYNTAX TilfaProtectionType MAX-ACCESS read-create STATUS current DESCRIPTION "TI-LFA Protection Type." ::= { f3L3TrafficOspfInterfaceEntry 23 } -- -- Traffic BGP Peer Address Family Table -- f3L3TrafficBgpPeerAddressFamilyTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficBgpPeerAddressFamilyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the Traffic BGP Peer Address Family." ::= { f3L3Objects 37 } f3L3TrafficBgpPeerAddressFamilyEntry OBJECT-TYPE SYNTAX F3L3TrafficBgpPeerAddressFamilyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficBgpPeerAddressFamilyTable." INDEX { neIndex, f3VrfIndex, f3L3TrafficBgpRouterIndex, f3L3TrafficBgpPeerIndex, f3L3TrafficBgpPeerAddressFamilyIndex } ::= { f3L3TrafficBgpPeerAddressFamilyTable 1 } F3L3TrafficBgpPeerAddressFamilyEntry ::= SEQUENCE { f3L3TrafficBgpPeerAddressFamilyIndex Integer32, f3L3TrafficBgpPeerAddressFamilyName BgpPeerAddressFamilyNameType, f3L3TrafficBgpPeerAddressFamilyRedistOspfRoute TruthValue, f3L3TrafficBgpPeerAddressFamilyRedistConnectedRoute TruthValue, f3L3TrafficBgpPeerAddressFamilyRedistStaticRoute TruthValue, f3L3TrafficBgpPeerAddressFamilyRedistDhcpRoute TruthValue, f3L3TrafficBgpPeerAddressFamilyRedistSlaacRoute TruthValue, f3L3TrafficBgpPeerAddressFamilySendDefaultRoute TruthValue, f3L3TrafficBgpPeerAddressFamilyNextHopType BgpNextHopUpdateType, f3L3TrafficBgpPeerAddressFamilyNextHopIpv4 IpAddress, f3L3TrafficBgpPeerAddressFamilyNextHopIpv6 Ipv6Address, f3L3TrafficBgpPeerAddressFamilyExtNextHopControl TruthValue, f3L3TrafficBgpPeerAddressFamilyStorageType StorageType, f3L3TrafficBgpPeerAddressFamilyRowStatus RowStatus } f3L3TrafficBgpPeerAddressFamilyIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the Traffic BGP Peer Address Family entry." ::= { f3L3TrafficBgpPeerAddressFamilyEntry 1 } f3L3TrafficBgpPeerAddressFamilyName OBJECT-TYPE SYNTAX BgpPeerAddressFamilyNameType MAX-ACCESS read-create STATUS current DESCRIPTION "Address Family Name." ::= { f3L3TrafficBgpPeerAddressFamilyEntry 2 } f3L3TrafficBgpPeerAddressFamilyRedistOspfRoute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to true, redistribute the connected route to the neighbour." ::= { f3L3TrafficBgpPeerAddressFamilyEntry 3 } f3L3TrafficBgpPeerAddressFamilyRedistConnectedRoute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to true, redistribute the connected route to the neighbour." ::= { f3L3TrafficBgpPeerAddressFamilyEntry 4 } f3L3TrafficBgpPeerAddressFamilyRedistStaticRoute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to true, redistribute the static route to the neighbour." ::= { f3L3TrafficBgpPeerAddressFamilyEntry 5 } f3L3TrafficBgpPeerAddressFamilyRedistDhcpRoute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to true, redistribute the dhcproute to the neighbour." ::= { f3L3TrafficBgpPeerAddressFamilyEntry 6 } f3L3TrafficBgpPeerAddressFamilyRedistSlaacRoute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to true, redistribute the default route to the neighbour. This attribute is only applicable to IPv6 address family." ::= { f3L3TrafficBgpPeerAddressFamilyEntry 7 } f3L3TrafficBgpPeerAddressFamilySendDefaultRoute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If set to true, send the default route to the neighbour." ::= { f3L3TrafficBgpPeerAddressFamilyEntry 8 } f3L3TrafficBgpPeerAddressFamilyNextHopType OBJECT-TYPE SYNTAX BgpNextHopUpdateType MAX-ACCESS read-write STATUS current DESCRIPTION "The mechanism to update NEXT HOP attribute in update message: 1. DEFAULT: Update next hop according the rules in RFC4271 2. SELF: Use transmitting interface's as the next hop 3. IPv4 Address: Configure IPv4 address as next hop explicitly 4. IPv6 Address: Configure IPv6 address as next hop explicitly" ::= { f3L3TrafficBgpPeerAddressFamilyEntry 9 } f3L3TrafficBgpPeerAddressFamilyNextHopIpv4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 address used to override NEXT HOP attribute." ::= { f3L3TrafficBgpPeerAddressFamilyEntry 10 } f3L3TrafficBgpPeerAddressFamilyNextHopIpv6 OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 address used to override NEXT HOP attribute." ::= { f3L3TrafficBgpPeerAddressFamilyEntry 11 } f3L3TrafficBgpPeerAddressFamilyExtNextHopControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether to support Extended Next Hop Encoding Capability. E.g Allowing advertising IPV4 route with a Next Hop address of IPv6.." ::= { f3L3TrafficBgpPeerAddressFamilyEntry 12 } f3L3TrafficBgpPeerAddressFamilyStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3L3TrafficBgpPeerAddressFamilyEntry 13 } f3L3TrafficBgpPeerAddressFamilyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficBgpPeerAddressFamilyRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficBgpPeerAddressFamilyRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficBgpPeerAddressFamilyRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficBgpPeerAddressFamilyEntry 14 } -- -- Traffic BGP RIB Route Table -- f3L3TrafficBgpRIBRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficBgpRIBRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the Traffic BGP RIB routes." ::= { f3L3Objects 38 } f3L3TrafficBgpRIBRouteEntry OBJECT-TYPE SYNTAX F3L3TrafficBgpRIBRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficBgpRouteTable." INDEX { neIndex, f3VrfIndex, f3L3TrafficBgpRouterIndex, f3L3TrafficBgpRIBRouteIndex } ::= { f3L3TrafficBgpRIBRouteTable 1 } F3L3TrafficBgpRIBRouteEntry ::= SEQUENCE { f3L3TrafficBgpRIBRouteIndex Integer32, f3L3TrafficBgpRIBRouteNetwork DisplayString, f3L3TrafficBgpRIBRouteNextHop DisplayString, f3L3TrafficBgpRIBRouteMetric Integer32, f3L3TrafficBgpRIBRoutePath DisplayString } f3L3TrafficBgpRIBRouteIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the Traffic BGP RIB Route entry." ::= { f3L3TrafficBgpRIBRouteEntry 1 } f3L3TrafficBgpRIBRouteNetwork OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Traffic BGP RIB Route's destination network address." ::= { f3L3TrafficBgpRIBRouteEntry 2 } f3L3TrafficBgpRIBRouteNextHop OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Traffic BGP RIB Route's next hop interface address." ::= { f3L3TrafficBgpRIBRouteEntry 3 } f3L3TrafficBgpRIBRouteMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "List of AS numbers in the path to route's destination network" ::= { f3L3TrafficBgpRIBRouteEntry 4 } f3L3TrafficBgpRIBRoutePath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the Traffic BGP RIB Route entry." ::= { f3L3TrafficBgpRIBRouteEntry 5 } -- -- L3 Traffic BGP In Route Table -- f3L3TrafficBgpInRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficBgpInRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP In routes. Must set f3L3TrafficBgpRouterAction as optimizeBgpInRouteRetrieve(2) before get data from this table." ::= { f3L3Objects 39 } f3L3TrafficBgpInRouteEntry OBJECT-TYPE SYNTAX F3L3TrafficBgpInRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficBgpInRouteTable. Entries can be created/deleted in this table by management application action." INDEX { neIndex, f3VrfIndex, f3L3TrafficBgpRouterIndex, f3L3TrafficBgpInRouteIndex } ::= { f3L3TrafficBgpInRouteTable 1 } F3L3TrafficBgpInRouteEntry ::= SEQUENCE { f3L3TrafficBgpInRouteIndex Unsigned32, f3L3TrafficBgpInRouteNetwork DisplayString, f3L3TrafficBgpInRouteNextHop DisplayString, f3L3TrafficBgpInRouteMetric Unsigned32, f3L3TrafficBgpInRoutePath DisplayString, f3L3TrafficBgpInRouteLocalPreference Unsigned32 } f3L3TrafficBgpInRouteIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this route. Key of the table." ::= { f3L3TrafficBgpInRouteEntry 1 } f3L3TrafficBgpInRouteNetwork OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Network of destination." ::= { f3L3TrafficBgpInRouteEntry 2 } f3L3TrafficBgpInRouteNextHop OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Address of next hop." ::= { f3L3TrafficBgpInRouteEntry 3 } f3L3TrafficBgpInRouteMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Metric value of this route." ::= { f3L3TrafficBgpInRouteEntry 4 } f3L3TrafficBgpInRoutePath OBJECT-TYPE SYNTAX DisplayString (SIZE(0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "The list of AS numbers to the destination." ::= { f3L3TrafficBgpInRouteEntry 5 } f3L3TrafficBgpInRouteLocalPreference OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Local Preference Value received from iBGP." ::= { f3L3TrafficBgpInRouteEntry 6 } -- -- L3 Traffic BGP Route V2 Table -- f3L3TrafficBgpRouteV2Table OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficBgpRouteV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BGP routes. Must set f3L3TrafficBgpRouterAction as optimizeBgpRouteRetrieve(1) before get data from this table." ::= { f3L3Objects 40 } f3L3TrafficBgpRouteV2Entry OBJECT-TYPE SYNTAX F3L3TrafficBgpRouteV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficBgpRouteV2Table. Entries can be created/deleted in this table by management application action." INDEX { neIndex, f3VrfIndex, f3L3TrafficBgpRouterIndex, f3L3TrafficBgpRouteV2Index } ::= { f3L3TrafficBgpRouteV2Table 1 } F3L3TrafficBgpRouteV2Entry ::= SEQUENCE { f3L3TrafficBgpRouteV2Index Unsigned32, f3L3TrafficBgpRouteV2Network DisplayString, f3L3TrafficBgpRouteV2NextHop DisplayString, f3L3TrafficBgpRouteV2Metric Unsigned32, f3L3TrafficBgpRouteV2Path DisplayString, f3L3TrafficBgpRouteV2LocalPreference Unsigned32 } f3L3TrafficBgpRouteV2Index OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of this route. Key of the table." ::= { f3L3TrafficBgpRouteV2Entry 1 } f3L3TrafficBgpRouteV2Network OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Network of destination." ::= { f3L3TrafficBgpRouteV2Entry 2 } f3L3TrafficBgpRouteV2NextHop OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Address of next hop." ::= { f3L3TrafficBgpRouteV2Entry 3 } f3L3TrafficBgpRouteV2Metric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Metric value of this route." ::= { f3L3TrafficBgpRouteV2Entry 4 } f3L3TrafficBgpRouteV2Path OBJECT-TYPE SYNTAX DisplayString (SIZE(0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "The list of AS numbers to the destination." ::= { f3L3TrafficBgpRouteV2Entry 5 } f3L3TrafficBgpRouteV2LocalPreference OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Local Preference Value received from iBGP." ::= { f3L3TrafficBgpRouteV2Entry 6 } -- -- L3 Traffic BGP Peer Address Family Advertising Prefix Table -- f3L3TrafficBgpPeerAddressFamilyAdvPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficBgpPeerAddressFamilyAdvPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Advertising Prefix of BGP Peer Address Family." ::= { f3L3Objects 41 } f3L3TrafficBgpPeerAddressFamilyAdvPrefixEntry OBJECT-TYPE SYNTAX F3L3TrafficBgpPeerAddressFamilyAdvPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficBgpPeerAddressFamilyAdvPrefixTable. Entries can be created/deleted in this table by management application action." INDEX { neIndex, f3VrfIndex, f3L3TrafficBgpRouterIndex, f3L3TrafficBgpPeerIndex, f3L3TrafficBgpPeerAddressFamilyIndex, f3L3TrafficBgpPeerAddressFamilyAdvPrefix } ::= { f3L3TrafficBgpPeerAddressFamilyAdvPrefixTable 1 } F3L3TrafficBgpPeerAddressFamilyAdvPrefixEntry ::= SEQUENCE { f3L3TrafficBgpPeerAddressFamilyAdvPrefix DisplayString, f3L3TrafficBgpPeerAddressFamilyAdvPrefixStorageType StorageType, f3L3TrafficBgpPeerAddressFamilyAdvPrefixRowStatus RowStatus } f3L3TrafficBgpPeerAddressFamilyAdvPrefix OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "Advertising Prefix of a BGP Peer Address Family. Key of the table." ::= { f3L3TrafficBgpPeerAddressFamilyAdvPrefixEntry 1 } f3L3TrafficBgpPeerAddressFamilyAdvPrefixStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3L3TrafficBgpPeerAddressFamilyAdvPrefixEntry 2 } f3L3TrafficBgpPeerAddressFamilyAdvPrefixRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficBgpPeerAddressFamilyAdvPrefixRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficBgpPeerAddressFamilyAdvPrefixRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficBgpPeerAddressFamilyAdvPrefixRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficBgpPeerAddressFamilyAdvPrefixEntry 3 } -- -- L3 Traffic Ospf v3 Neighbor -- f3L3TrafficOspfV3NeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficOspfV3NeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OSPF v3 neighbor table. Must set f3VrfOspfRouterAction as optimizeOspfNeighborRetrieve(3) before get data from this table." ::= { f3L3Objects 42 } f3L3TrafficOspfV3NeighborEntry OBJECT-TYPE SYNTAX F3L3TrafficOspfV3NeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficOspfV3NeighborTable. Entries can be created/deleted in this table by management application action." INDEX { neIndex, f3VrfIndex, f3VrfOspfRouterIndex, f3L3TrafficOspfV3NeighborRouterId, f3L3TrafficOspfV3NeighborInterfaceId } ::= { f3L3TrafficOspfV3NeighborTable 1 } F3L3TrafficOspfV3NeighborEntry ::= SEQUENCE { f3L3TrafficOspfV3NeighborRouterId IpAddress, f3L3TrafficOspfV3NeighborInterfaceId Unsigned32, f3L3TrafficOspfV3NeighborPriority Unsigned32, f3L3TrafficOspfV3NeighborDeadTime Unsigned32, f3L3TrafficOspfV3NeighborLocalInterfaceName DisplayString, f3L3TrafficOspfV3NeighborState OspfAdjacencyState, f3L3TrafficOspfV3NeighborRole TrafficOspfRole, f3L3TrafficOspfV3NeighborIpAddress DisplayString } f3L3TrafficOspfV3NeighborRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Router ID of the neighbor." ::= { f3L3TrafficOspfV3NeighborEntry 1 } f3L3TrafficOspfV3NeighborInterfaceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "ID of the interface of neighbor." ::= { f3L3TrafficOspfV3NeighborEntry 2 } f3L3TrafficOspfV3NeighborPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of the neighbor." ::= { f3L3TrafficOspfV3NeighborEntry 3 } f3L3TrafficOspfV3NeighborDeadTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Dead Time field indicates the amount of time remaining that the router waits to receive an OSPF hello packet from the neighbor before declaring the neighbor down." ::= { f3L3TrafficOspfV3NeighborEntry 4 } f3L3TrafficOspfV3NeighborLocalInterfaceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of local interface which discovers the neighbor." ::= { f3L3TrafficOspfV3NeighborEntry 5 } f3L3TrafficOspfV3NeighborState OBJECT-TYPE SYNTAX OspfAdjacencyState MAX-ACCESS read-only STATUS current DESCRIPTION "State of Link State Database synchronization with the neighbor." ::= { f3L3TrafficOspfV3NeighborEntry 6 } f3L3TrafficOspfV3NeighborRole OBJECT-TYPE SYNTAX TrafficOspfRole MAX-ACCESS read-only STATUS current DESCRIPTION "Role of the neighbor. DR, DR other and Backup are applicable." ::= { f3L3TrafficOspfV3NeighborEntry 7 } f3L3TrafficOspfV3NeighborIpAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Link-local Address of interface of neighbor." ::= { f3L3TrafficOspfV3NeighborEntry 8 } -- -- L3 Traffic Ospf Link Link State Database -- f3L3TrafficOspfLinkLsDbTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficOspfLinkLsDbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OSPF Link State database. Must set f3VrfOspfRouterAction as optimizeOspfLinkLinkLsDbRetrieve(4) before get data from this table." ::= { f3L3Objects 43 } f3L3TrafficOspfLinkLsDbEntry OBJECT-TYPE SYNTAX F3L3TrafficOspfLinkLsDbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficOspfLinkLsDbTable. Entries can be created/deleted in this table by management application action." INDEX { neIndex, f3VrfIndex, f3VrfOspfRouterIndex, f3L3TrafficOspfLinkLsDbType, f3L3TrafficOspfLinkLsDbId, f3L3TrafficOspfLinkLsDbAdvRouterId, f3L3TrafficOspfLinkLsDbInterfaceId, f3L3TrafficOspfLinkLsDbInterface } ::= { f3L3TrafficOspfLinkLsDbTable 1 } F3L3TrafficOspfLinkLsDbEntry ::= SEQUENCE { f3L3TrafficOspfLinkLsDbType OspfLsaType, f3L3TrafficOspfLinkLsDbId IpAddress, f3L3TrafficOspfLinkLsDbAdvRouterId IpAddress, f3L3TrafficOspfLinkLsDbInterfaceId Unsigned32, f3L3TrafficOspfLinkLsDbInterface DisplayString, f3L3TrafficOspfLinkLsDbAreaId IpAddress, f3L3TrafficOspfLinkLsDbChecksum Unsigned32, f3L3TrafficOspfLinkLsDbSeqNum Unsigned32, f3L3TrafficOspfLinkLsDbAge Unsigned32, f3L3TrafficOspfLinkLsDbRtrPriority Unsigned32, f3L3TrafficOspfLinkLsDbLinkLocalAddress DisplayString, f3L3TrafficOspfLinkLsDbPrefixList DisplayString } f3L3TrafficOspfLinkLsDbType OBJECT-TYPE SYNTAX OspfLsaType MAX-ACCESS not-accessible STATUS current DESCRIPTION "LSA Type." ::= { f3L3TrafficOspfLinkLsDbEntry 1 } f3L3TrafficOspfLinkLsDbId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Link State ID." ::= { f3L3TrafficOspfLinkLsDbEntry 2 } f3L3TrafficOspfLinkLsDbAdvRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Advertising Router ID." ::= { f3L3TrafficOspfLinkLsDbEntry 3 } f3L3TrafficOspfLinkLsDbInterfaceId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface id of the interface instance from which the LSA was received." ::= { f3L3TrafficOspfLinkLsDbEntry 4 } f3L3TrafficOspfLinkLsDbInterface OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "The local interface name from which the LSA was received." ::= { f3L3TrafficOspfLinkLsDbEntry 5 } f3L3TrafficOspfLinkLsDbAreaId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Area ID." ::= { f3L3TrafficOspfLinkLsDbEntry 6 } f3L3TrafficOspfLinkLsDbChecksum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The checksum associated with Link State Advertisement." ::= { f3L3TrafficOspfLinkLsDbEntry 7 } f3L3TrafficOspfLinkLsDbSeqNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Sequence Number associated with the last LSA." ::= { f3L3TrafficOspfLinkLsDbEntry 8 } f3L3TrafficOspfLinkLsDbAge OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The age, in seconds, since this LSA was last received." ::= { f3L3TrafficOspfLinkLsDbEntry 9 } f3L3TrafficOspfLinkLsDbRtrPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Router priority for the interface." ::= { f3L3TrafficOspfLinkLsDbEntry 10 } f3L3TrafficOspfLinkLsDbLinkLocalAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The originating router's linklocal interface address for the link." ::= { f3L3TrafficOspfLinkLsDbEntry 11 } f3L3TrafficOspfLinkLsDbPrefixList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "List of Prefixes associated with the link. In maximum, up to 16 prefixes are supported." ::= { f3L3TrafficOspfLinkLsDbEntry 12 } -- -- L3 traffic ipv4 static route Table -- f3L3TrafficIpv4StaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIpv4StaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the L3 Traffic Ipv4 Static route." ::= { f3L3Objects 44 } f3L3TrafficIpv4StaticRouteEntry OBJECT-TYPE SYNTAX F3L3TrafficIpv4StaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficIpv4StaticRouteTable." INDEX { neIndex, f3VrfIndex, f3L3TrafficIpv4StaticRouteDest, f3L3TrafficIpv4StaticRouteMask, f3L3TrafficIpv4StaticRouteNextHop, f3L3TrafficIpv4StaticRouteInterface } ::= { f3L3TrafficIpv4StaticRouteTable 1 } F3L3TrafficIpv4StaticRouteEntry ::= SEQUENCE { f3L3TrafficIpv4StaticRouteDest IpAddress, f3L3TrafficIpv4StaticRouteMask IpAddress, f3L3TrafficIpv4StaticRouteNextHop DisplayString, f3L3TrafficIpv4StaticRouteInterface DisplayString, f3L3TrafficIpv4StaticRouteMetric Integer32, f3L3TrafficIpv4StaticRouteSourceForwardingEnable TruthValue, f3L3TrafficIpv4StaticRouteStorageType StorageType, f3L3TrafficIpv4StaticRouteRowStatus RowStatus } f3L3TrafficIpv4StaticRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "It specifies the traffic Ipv4 Static route destination." ::= { f3L3TrafficIpv4StaticRouteEntry 1 } f3L3TrafficIpv4StaticRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "It specifies the traffic Ipv4 Static route mask." ::= { f3L3TrafficIpv4StaticRouteEntry 2 } f3L3TrafficIpv4StaticRouteNextHop OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "It specifies the traffic Ipv4 Static route next hop." ::= { f3L3TrafficIpv4StaticRouteEntry 3 } f3L3TrafficIpv4StaticRouteInterface OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "It specifies the traffic Ipv4 Static route interface." ::= { f3L3TrafficIpv4StaticRouteEntry 4 } f3L3TrafficIpv4StaticRouteMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "It specifies the traffic Ipv4 Static route metric." ::= { f3L3TrafficIpv4StaticRouteEntry 5 } f3L3TrafficIpv4StaticRouteSourceForwardingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "It specifies the traffic Ipv4 static route source forwarding whether enabled." ::= { f3L3TrafficIpv4StaticRouteEntry 6 } f3L3TrafficIpv4StaticRouteStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3L3TrafficIpv4StaticRouteEntry 7 } f3L3TrafficIpv4StaticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIpv4StaticRouteRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIpv4StaticRouteRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIpv4StaticRouteRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficIpv4StaticRouteEntry 8 } -- -- L3 taffic ipv4 all route Table -- f3L3TrafficIpv4AllRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIpv4AllRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the L3 Traffic Ipv4 route. Must set f3VrfActionX as optimizeRouteRetrieve(3) before get data from this table." ::= { f3L3Objects 45 } f3L3TrafficIpv4AllRouteEntry OBJECT-TYPE SYNTAX F3L3TrafficIpv4AllRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficIpv4AllRouteTable." INDEX { neIndex, f3VrfIndex, f3L3TrafficIpv4AllRouteDest, f3L3TrafficIpv4AllRouteMask, f3L3TrafficIpv4AllRouteNextHop, f3L3TrafficIpv4AllRouteInterface, f3L3TrafficIpv4AllRouteOrigin } ::= { f3L3TrafficIpv4AllRouteTable 1 } F3L3TrafficIpv4AllRouteEntry ::= SEQUENCE { f3L3TrafficIpv4AllRouteDest IpAddress, f3L3TrafficIpv4AllRouteMask IpAddress, f3L3TrafficIpv4AllRouteNextHop DisplayString, f3L3TrafficIpv4AllRouteInterface DisplayString, f3L3TrafficIpv4AllRouteOrigin TrafficIpRouteOriginType, f3L3TrafficIpv4AllRouteMetric Integer32, f3L3TrafficIpv4AllRouteSourceForwardingEnable TruthValue, f3L3TrafficIpv4AllRouteAdminDistance Unsigned32, f3L3TrafficIpv4AllRouteStatus TrafficIpRouteStatusType, f3L3TrafficIpv4AllRouteStorageType StorageType, f3L3TrafficIpv4AllRouteRowStatus RowStatus } f3L3TrafficIpv4AllRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "It specifies the traffic Ipv4 route destination." ::= { f3L3TrafficIpv4AllRouteEntry 1 } f3L3TrafficIpv4AllRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "It specifies the traffic Ipv4 route mask." ::= { f3L3TrafficIpv4AllRouteEntry 2 } f3L3TrafficIpv4AllRouteNextHop OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "It specifies the traffic Ipv4 route next hop." ::= { f3L3TrafficIpv4AllRouteEntry 3 } f3L3TrafficIpv4AllRouteInterface OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "It specifies the traffic Ipv4 route interface." ::= { f3L3TrafficIpv4AllRouteEntry 4 } f3L3TrafficIpv4AllRouteOrigin OBJECT-TYPE SYNTAX TrafficIpRouteOriginType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The origin of IP Route." ::= { f3L3TrafficIpv4AllRouteEntry 5 } f3L3TrafficIpv4AllRouteMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "It specifies the traffic Ipv4 route metric." ::= { f3L3TrafficIpv4AllRouteEntry 6 } f3L3TrafficIpv4AllRouteSourceForwardingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "It specifies the traffic Ipv4 route source forwarding whether enabled." ::= { f3L3TrafficIpv4AllRouteEntry 7 } f3L3TrafficIpv4AllRouteAdminDistance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Administrative Distance of IP Route." ::= { f3L3TrafficIpv4AllRouteEntry 8 } f3L3TrafficIpv4AllRouteStatus OBJECT-TYPE SYNTAX TrafficIpRouteStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "It specifies the traffic Ipv4 route status." ::= { f3L3TrafficIpv4AllRouteEntry 9 } f3L3TrafficIpv4AllRouteStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of storage configured for this entry." ::= { f3L3TrafficIpv4AllRouteEntry 10 } f3L3TrafficIpv4AllRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIpv4AllRouteRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIpv4AllRouteRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIpv4AllRouteRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficIpv4AllRouteEntry 11 } -- -- L3 taffic ipv6 static route Table -- f3L3TrafficIpv6StaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIpv6StaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the L3 Traffic Ipv6 static route." ::= { f3L3Objects 46 } f3L3TrafficIpv6StaticRouteEntry OBJECT-TYPE SYNTAX F3L3TrafficIpv6StaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficIpv6StaticRouteTable." INDEX { neIndex, f3VrfIndex, f3L3TrafficIpv6StaticRouteDest, f3L3TrafficIpv6StaticRoutePrefixLength, f3L3TrafficIpv6StaticRouteNextHop, f3L3TrafficIpv6StaticRouteInterface } ::= { f3L3TrafficIpv6StaticRouteTable 1 } F3L3TrafficIpv6StaticRouteEntry ::= SEQUENCE { f3L3TrafficIpv6StaticRouteDest Ipv6Address, f3L3TrafficIpv6StaticRoutePrefixLength Integer32, f3L3TrafficIpv6StaticRouteNextHop DisplayString, f3L3TrafficIpv6StaticRouteInterface DisplayString, f3L3TrafficIpv6StaticRouteMetric Integer32, f3L3TrafficIpv6StaticRouteStorageType StorageType, f3L3TrafficIpv6StaticRouteRowStatus RowStatus } f3L3TrafficIpv6StaticRouteDest OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the static-route-mask attribute is not equal to x." ::= { f3L3TrafficIpv6StaticRouteEntry 1 } f3L3TrafficIpv6StaticRoutePrefixLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicate the mask to be logically ANDed with the destination address before being compared to the value in the cmStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the static route mask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical AND of x with the value of the corresponding instance of the static-route-dest attribute is not equal to static route destination." ::= { f3L3TrafficIpv6StaticRouteEntry 2 } f3L3TrafficIpv6StaticRouteNextHop OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the next router en route." ::= { f3L3TrafficIpv6StaticRouteEntry 3 } f3L3TrafficIpv6StaticRouteInterface OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the IP interface for the interface static route." ::= { f3L3TrafficIpv6StaticRouteEntry 4 } f3L3TrafficIpv6StaticRouteMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's cmStaticRouteProto value. If this metric is not used, its value should be set to 1." ::= { f3L3TrafficIpv6StaticRouteEntry 5 } f3L3TrafficIpv6StaticRouteStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3L3TrafficIpv6StaticRouteEntry 6 } f3L3TrafficIpv6StaticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIpv6StaticRouteRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIpv6StaticRouteRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIpv6StaticRouteRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficIpv6StaticRouteEntry 7 } -- -- L3 taffic ipv6 all route Table -- f3L3TrafficIpv6AllRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIpv6AllRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entries for the L3 Traffic Ipv6 route. Must set f3VrfActionX as optimizeIpv6RouteRetrieve(7) before get data from this table." ::= { f3L3Objects 47 } f3L3TrafficIpv6AllRouteEntry OBJECT-TYPE SYNTAX F3L3TrafficIpv6AllRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficIpv6AllRouteTable." INDEX { neIndex, f3VrfIndex, f3L3TrafficIpv6AllRouteDest, f3L3TrafficIpv6AllRoutePrefixLength, f3L3TrafficIpv6AllRouteNextHop, f3L3TrafficIpv6AllRouteInterface, f3L3TrafficIpv6AllRouteOrigin } ::= { f3L3TrafficIpv6AllRouteTable 1 } F3L3TrafficIpv6AllRouteEntry ::= SEQUENCE { f3L3TrafficIpv6AllRouteDest Ipv6Address, f3L3TrafficIpv6AllRoutePrefixLength Integer32, f3L3TrafficIpv6AllRouteNextHop DisplayString, f3L3TrafficIpv6AllRouteInterface DisplayString, f3L3TrafficIpv6AllRouteOrigin TrafficIpRouteOriginType, f3L3TrafficIpv6AllRouteMetric Integer32, f3L3TrafficIpv6AllRouteAdminDistance Unsigned32, f3L3TrafficIpv6AllRouteStatus TrafficIpRouteStatus, f3L3TrafficIpv6AllRouteStorageType StorageType, f3L3TrafficIpv6AllRouteRowStatus RowStatus } f3L3TrafficIpv6AllRouteDest OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the static-route-mask attribute is not equal to x." ::= { f3L3TrafficIpv6AllRouteEntry 1 } f3L3TrafficIpv6AllRoutePrefixLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicate the mask to be logically ANDed with the destination address before being compared to the value in the cmStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the static route mask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical AND of x with the value of the corresponding instance of the static-route-dest attribute is not equal to static route destination." ::= { f3L3TrafficIpv6AllRouteEntry 2 } f3L3TrafficIpv6AllRouteNextHop OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the next router en route." ::= { f3L3TrafficIpv6AllRouteEntry 3 } f3L3TrafficIpv6AllRouteInterface OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the IP interface for the interface static route." ::= { f3L3TrafficIpv6AllRouteEntry 4 } f3L3TrafficIpv6AllRouteOrigin OBJECT-TYPE SYNTAX TrafficIpRouteOriginType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The origin of IP Route." ::= { f3L3TrafficIpv6AllRouteEntry 5 } f3L3TrafficIpv6AllRouteMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's cmStaticRouteProto value. If this metric is not used, its value should be set to 1." ::= { f3L3TrafficIpv6AllRouteEntry 6 } f3L3TrafficIpv6AllRouteAdminDistance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Administrative Distance of IP Route." ::= { f3L3TrafficIpv6AllRouteEntry 7 } f3L3TrafficIpv6AllRouteStatus OBJECT-TYPE SYNTAX TrafficIpRouteStatus MAX-ACCESS read-only STATUS current DESCRIPTION "It specifies the traffic Ipv6 route status." ::= { f3L3TrafficIpv6AllRouteEntry 8 } f3L3TrafficIpv6AllRouteStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3L3TrafficIpv6AllRouteEntry 9 } f3L3TrafficIpv6AllRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIpv6AllRouteRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIpv6AllRouteRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIpv6AllRouteRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficIpv6AllRouteEntry 10 } -- -- IP Prefix List Table -- f3IpPrefixListTable OBJECT-TYPE SYNTAX SEQUENCE OF F3IpPrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Prefix List table." ::= { f3L3Objects 48 } f3IpPrefixListEntry OBJECT-TYPE SYNTAX F3IpPrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3IpPrefixListTable. Entries can be created/deleted in this table by management application action." INDEX { neIndex, f3VrfIndex, f3IpPrefixListIndex } ::= { f3IpPrefixListTable 1 } F3IpPrefixListEntry ::= SEQUENCE { f3IpPrefixListIndex Integer32, f3IpPrefixListName DisplayString, f3IpPrefixListDefaultDisposition IpPrefixDispositionType, f3IpPrefixListStorageType StorageType, f3IpPrefixListRowStatus RowStatus } f3IpPrefixListIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify this IP Prefix List within a VRF." ::= { f3IpPrefixListEntry 1 } f3IpPrefixListName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The name of IP Prefix List." ::= { f3IpPrefixListEntry 2 } f3IpPrefixListDefaultDisposition OBJECT-TYPE SYNTAX IpPrefixDispositionType MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the default disposition for the prefix that does not match any prefix in the prefix list.." ::= { f3IpPrefixListEntry 3 } f3IpPrefixListStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3IpPrefixListEntry 4 } f3IpPrefixListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3IpPrefixListRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3IpPrefixListRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3IpPrefixListRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3IpPrefixListEntry 5 } -- -- IP Prefix Table -- f3IpPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF F3IpPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Prefix table." ::= { f3L3Objects 49 } f3IpPrefixEntry OBJECT-TYPE SYNTAX F3IpPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3IpPrefixTable. Entries can be created/deleted in this table by management application action." INDEX { neIndex, f3VrfIndex, f3IpPrefixListIndex, f3IpPrefixIndex } ::= { f3IpPrefixTable 1 } F3IpPrefixEntry ::= SEQUENCE { f3IpPrefixIndex Integer32, f3IpPrefix DisplayString, f3IpPrefixPriority Unsigned32, f3IpPrefixDisposition IpPrefixDispositionType, f3IpPrefixLessOrEqualPrefixLen Integer32, f3IpPrefixGreaterOrEqualPrefixLen Integer32, f3IpPrefixStorageType StorageType, f3IpPrefixRowStatus RowStatus } f3IpPrefixIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer index value used to uniquely identify this IP Prefix entry within a IP Prefix List." ::= { f3IpPrefixEntry 1 } f3IpPrefix OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The IP Prefix. The length is up to 64 characters." ::= { f3IpPrefixEntry 2 } f3IpPrefixPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This dictates the order in which this entry is applied relative to the IP Prefix List. These values need not be sequential and can have gaps. The priority of the IP Prefix Entry within a list shall be unique. Higher the value lower the priority." ::= { f3IpPrefixEntry 3 } f3IpPrefixDisposition OBJECT-TYPE SYNTAX IpPrefixDispositionType MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates whether to permit or deny the prefix." ::= { f3IpPrefixEntry 4 } f3IpPrefixLessOrEqualPrefixLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This allows specifying a prefix length which allows filtering networks with more specific prefixes within this Prefix attribute. For example, if this value is 16 and the Prefix attribute is <10.0.0.0/8>, then all the networks in 10.0.0.0/8 that have prefix that is 16 or less will be filtered. A specific value of Prefix 0.0.0.0/0 with a value of 32 for this attribute implies all the networks and it could be used for the rule with highest priority value (lowest priority) that permits all networks that have not been filtered by higher priority entries." ::= { f3IpPrefixEntry 5 } f3IpPrefixGreaterOrEqualPrefixLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This allows specifying a prefix length which allows filtering all networks in the specified Prefix that are at least the length specified for this attribute. This attribute value shall be greater than the Prefix Length of the Prefix attribute. For example, if this value is 16 and the Prefix attribute is <10.0.0.0/8>, then all the networks in 10.0.0.0/8 with a prefix greater than or equal to 16 are filtered." ::= { f3IpPrefixEntry 6 } f3IpPrefixStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3IpPrefixEntry 7 } f3IpPrefixRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3IpPrefixRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3IpPrefixRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3IpPrefixRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3IpPrefixEntry 8 } -- -- L3 Traffic IP Interface RAP Prefix Table -- f3L3TrafficIPInterfaceRAPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIPInterfaceRAPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Traffic IP interface RAP prefix table." ::= { f3L3Objects 50 } f3L3TrafficIPInterfaceRAPrefixEntry OBJECT-TYPE SYNTAX F3L3TrafficIPInterfaceRAPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in f3L3TrafficIPInterfaceRAPrefixTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPIfIndex, f3L3TrafficIPInterfaceRAPrefixIndex } ::= { f3L3TrafficIPInterfaceRAPrefixTable 1 } F3L3TrafficIPInterfaceRAPrefixEntry ::= SEQUENCE { f3L3TrafficIPInterfaceRAPrefixIndex Integer32, f3L3TrafficIPInterfaceRAPrefixAdvertiseEnabled TruthValue, f3L3TrafficIPInterfaceRAPrefix Ipv6Address, f3L3TrafficIPInterfaceRAPrefixLength Integer32, f3L3TrafficIPInterfaceRAPrefixValidLifeTime Unsigned32, f3L3TrafficIPInterfaceRAPrefixPreferredLifeTime Unsigned32, f3L3TrafficIPInterfaceRAPrefixStorageType StorageType, f3L3TrafficIPInterfaceRAPrefixRowStatus RowStatus } f3L3TrafficIPInterfaceRAPrefixIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique integer index value corresponding to a traffic IP interface RA prefix." ::= { f3L3TrafficIPInterfaceRAPrefixEntry 1 } f3L3TrafficIPInterfaceRAPrefixAdvertiseEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is to enable to Advertise prefix to link in router mode." ::= { f3L3TrafficIPInterfaceRAPrefixEntry 2 } f3L3TrafficIPInterfaceRAPrefix OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This is the IPv6 Prefix to be dispatched to the link in Router mode." ::= { f3L3TrafficIPInterfaceRAPrefixEntry 3 } f3L3TrafficIPInterfaceRAPrefixLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Prefix length." ::= { f3L3TrafficIPInterfaceRAPrefixEntry 4 } f3L3TrafficIPInterfaceRAPrefixValidLifeTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to specify fixed Valid lifetime of distributed prefix in seconds All ones may be set for unlimited lifetime." ::= { f3L3TrafficIPInterfaceRAPrefixEntry 5 } f3L3TrafficIPInterfaceRAPrefixPreferredLifeTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is used to specify fixed time interval for unrestricted use of prefix. When this time has been expired the address is considered as deprecated as specified in RFC4862 Preferred lifetime shall not be greater than the Valid Lifetime. All ones may be set for unlimited lifetime." ::= { f3L3TrafficIPInterfaceRAPrefixEntry 6 } f3L3TrafficIPInterfaceRAPrefixStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3L3TrafficIPInterfaceRAPrefixEntry 7 } f3L3TrafficIPInterfaceRAPrefixRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIPInterfaceRAPrefixRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIPInterfaceRAPrefixRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIPInterfaceRAPrefixRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficIPInterfaceRAPrefixEntry 8 } -- -- L3 traffic IP interface Ndp Table -- f3L3TrafficIPInterfaceNdpTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIPInterfaceNdpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Traffic IPv6 NDP table. Must set f3L3TrafficIPIfActionX as optimizeNdpRetrieve(2) before get data from this table." ::= { f3L3Objects 51 } f3L3TrafficIPInterfaceNdpEntry OBJECT-TYPE SYNTAX F3L3TrafficIPInterfaceNdpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in f3L3TrafficIPInterfaceNdpTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPv6IfIndex, f3L3TrafficIPv6NdpIPv6Addr } ::= { f3L3TrafficIPInterfaceNdpTable 1 } F3L3TrafficIPInterfaceNdpEntry ::= SEQUENCE { f3L3TrafficIPInterfaceNdpIPv6Addr Ipv6Address, f3L3TrafficIPInterfaceNdpInterface DisplayString, f3L3TrafficIPInterfaceNdpMacAddress MacAddress, f3L3TrafficIPInterfaceNdpType IpEntryType, f3L3TrafficIPInterfaceNdpReachabilityState NdpNeighborReachabilityState, f3L3TrafficIPInterfaceNdpAge Integer32, f3L3TrafficIPInterfaceNdpStorageType StorageType, f3L3TrafficIPInterfaceNdpRowStatus RowStatus } f3L3TrafficIPInterfaceNdpIPv6Addr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the IP address of the NDP Entry." ::= { f3L3TrafficIPInterfaceNdpEntry 1 } f3L3TrafficIPInterfaceNdpInterface OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the IP interface for the NDP Entry." ::= { f3L3TrafficIPInterfaceNdpEntry 2 } f3L3TrafficIPInterfaceNdpMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This is the MAC address of the NDP Entry." ::= { f3L3TrafficIPInterfaceNdpEntry 3 } f3L3TrafficIPInterfaceNdpType OBJECT-TYPE SYNTAX IpEntryType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of NDP Entry. Note that static entries can be created." ::= { f3L3TrafficIPInterfaceNdpEntry 4 } f3L3TrafficIPInterfaceNdpReachabilityState OBJECT-TYPE SYNTAX NdpNeighborReachabilityState MAX-ACCESS read-only STATUS current DESCRIPTION "This is the reachability state of the NDP Entry." ::= { f3L3TrafficIPInterfaceNdpEntry 5 } f3L3TrafficIPInterfaceNdpAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates entry age in seconds." ::= { f3L3TrafficIPInterfaceNdpEntry 6 } f3L3TrafficIPInterfaceNdpStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3L3TrafficIPInterfaceNdpEntry 7 } f3L3TrafficIPInterfaceNdpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIPInterfaceNdpRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIPInterfaceNdpRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIPInterfaceNdpRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficIPInterfaceNdpEntry 8 } -- -- L3 traffic IP interface IPv6 Address Table -- f3L3TrafficIPInterfaceIPv6AddressTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIPInterfaceIPv6AddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Traffic interface IPv6 address table. Must set f3L3TrafficIPIfActionX as optimizeIPv6AddressEntryRetrieve(3) before get data from this table." ::= { f3L3Objects 52 } f3L3TrafficIPInterfaceIPv6AddressEntry OBJECT-TYPE SYNTAX F3L3TrafficIPInterfaceIPv6AddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficIPInterfaceIPv6AddressTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPIfIndex, f3L3TrafficIPInterfaceIPv6AddressIndex } ::= { f3L3TrafficIPInterfaceIPv6AddressTable 1 } F3L3TrafficIPInterfaceIPv6AddressEntry ::= SEQUENCE { f3L3TrafficIPInterfaceIPv6AddressIndex Integer32, f3L3TrafficIPInterfaceIPv6AddressAssignMode Ipv6AddressAssignMode, f3L3TrafficIPInterfaceIPv6AddressUnicastAddr Ipv6Address, f3L3TrafficIPInterfaceIPv6AddressUnicastAddrPrefixLength Integer32, f3L3TrafficIPInterfaceIPv6AddressUnicastAddrAutoGenPrefix DisplayString, f3L3TrafficIPInterfaceIPv6AddressStorageType StorageType, f3L3TrafficIPInterfaceIPv6AddressRowStatus RowStatus } f3L3TrafficIPInterfaceIPv6AddressIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique integer index value corresponding to a traffic IP interface IPv6 unicast address." ::= { f3L3TrafficIPInterfaceIPv6AddressEntry 1 } f3L3TrafficIPInterfaceIPv6AddressAssignMode OBJECT-TYPE SYNTAX Ipv6AddressAssignMode MAX-ACCESS read-write STATUS current DESCRIPTION "The assignment mode of IPv6 Unicast Address." ::= { f3L3TrafficIPInterfaceIPv6AddressEntry 2 } f3L3TrafficIPInterfaceIPv6AddressUnicastAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "This is IPv6 Unicast Address." ::= { f3L3TrafficIPInterfaceIPv6AddressEntry 3 } f3L3TrafficIPInterfaceIPv6AddressUnicastAddrPrefixLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This is prefix length of the unicast address." ::= { f3L3TrafficIPInterfaceIPv6AddressEntry 4 } f3L3TrafficIPInterfaceIPv6AddressUnicastAddrAutoGenPrefix OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This is prefix of the unicast address in automatic address assignment mode." ::= { f3L3TrafficIPInterfaceIPv6AddressEntry 5 } f3L3TrafficIPInterfaceIPv6AddressStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." ::= { f3L3TrafficIPInterfaceIPv6AddressEntry 6 } f3L3TrafficIPInterfaceIPv6AddressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIPInterfaceIPv6AddressRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIPInterfaceIPv6AddressRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIPInterfaceIPv6AddressRowStatus object may be modified if the associated instance of this object is equal to active(1)." ::= { f3L3TrafficIPInterfaceIPv6AddressEntry 7 } -- -- L3 flow point Current Statistics Table -- f3L3FlowPointStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3FlowPointStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of L3 Flow Point related statistics. These reflect the current data." ::= { f3L3Performance 1 } f3L3FlowPointStatsEntry OBJECT-TYPE SYNTAX F3L3FlowPointStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3FlowPointStatsTable. Entries exist in this table for each L3 flow point." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3FlowPointStatsIndex } ::= { f3L3FlowPointStatsTable 1 } F3L3FlowPointStatsEntry ::= SEQUENCE { f3L3FlowPointStatsIndex Integer32, f3L3FlowPointStatsIntervalType CmPmIntervalType, f3L3FlowPointStatsValid TruthValue, f3L3FlowPointStatsAction CmPmBinAction, f3L3FlowPointStatsFMG PerfCounter64, f3L3FlowPointStatsFMY PerfCounter64, f3L3FlowPointStatsFMRD PerfCounter64, f3L3FlowPointStatsFTD PerfCounter64, f3L3FlowPointStatsFragmentedDropAcl PerfCounter64, f3L3FlowPointStatsAclRuleDrop PerfCounter64, f3L3FlowPointStatsTtlEqual1Drop PerfCounter64, f3L3FlowPointStatsFrameTx PerfCounter64, f3L3FlowPointStatsFrameRx PerfCounter64, f3L3FlowPointStatsNoRouteDrop PerfCounter64, f3L3FlowPointStatsHopLimitDrop PerfCounter64 } f3L3FlowPointStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min" ::= { f3L3FlowPointStatsEntry 1 } f3L3FlowPointStatsIntervalType OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "Interval over which Performance Monitoring data is collected." ::= { f3L3FlowPointStatsEntry 2 } f3L3FlowPointStatsValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { f3L3FlowPointStatsEntry 3 } f3L3FlowPointStatsAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { f3L3FlowPointStatsEntry 4 } f3L3FlowPointStatsFMG OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Frames Marked Green." ::= { f3L3FlowPointStatsEntry 5 } f3L3FlowPointStatsFMY OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Frames Marked Yellow." ::= { f3L3FlowPointStatsEntry 6 } f3L3FlowPointStatsFMRD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Frames Marked Red and Discarded." ::= { f3L3FlowPointStatsEntry 7 } f3L3FlowPointStatsFTD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Frames Tail Dropped." ::= { f3L3FlowPointStatsEntry 8 } f3L3FlowPointStatsFragmentedDropAcl OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of dropped fragmented packets." ::= { f3L3FlowPointStatsEntry 9 } f3L3FlowPointStatsAclRuleDrop OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of dropped packets due to ACL rule." ::= { f3L3FlowPointStatsEntry 10 } f3L3FlowPointStatsTtlEqual1Drop OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION " the number of dropped packets due to ttl's value is 1." ::= { f3L3FlowPointStatsEntry 11 } f3L3FlowPointStatsFrameTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of total transmitted frames." ::= { f3L3FlowPointStatsEntry 12 } f3L3FlowPointStatsFrameRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of total received frames." ::= { f3L3FlowPointStatsEntry 13 } f3L3FlowPointStatsNoRouteDrop OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of frames drop due to no route." ::= { f3L3FlowPointStatsEntry 14 } f3L3FlowPointStatsHopLimitDrop OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of frames drop due to hop limit." ::= { f3L3FlowPointStatsEntry 15 } -- -- L3 flow point history Statistics Table -- f3L3FlowPointHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3FlowPointHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of L3 Flow Point related statistics. These reflect the current data." ::= { f3L3Performance 2 } f3L3FlowPointHistoryEntry OBJECT-TYPE SYNTAX F3L3FlowPointHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3FlowPointHistoryTable. Entries exist in this table for each L3 flow point." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3FlowPointStatsIndex, f3L3FlowPointHistoryIndex } ::= { f3L3FlowPointHistoryTable 1 } F3L3FlowPointHistoryEntry ::= SEQUENCE { f3L3FlowPointHistoryIndex Integer32, f3L3FlowPointHistoryTime DateAndTime, f3L3FlowPointHistoryValid TruthValue, f3L3FlowPointHistoryAction CmPmBinAction, f3L3FlowPointHistoryFMG PerfCounter64, f3L3FlowPointHistoryFMY PerfCounter64, f3L3FlowPointHistoryFMRD PerfCounter64, f3L3FlowPointHistoryFTD PerfCounter64, f3L3FlowPointHistoryFragmentedDropAcl PerfCounter64, f3L3FlowPointHistoryAclRuleDrop PerfCounter64, f3L3FlowPointHistoryTtlEqual1Drop PerfCounter64, f3L3FlowPointHistoryFrameTx PerfCounter64, f3L3FlowPointHistoryFrameRx PerfCounter64, f3L3FlowPointHistoryNoRouteDrop PerfCounter64, f3L3FlowPointHistoryHopLimitDrop PerfCounter64 } f3L3FlowPointHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min" ::= { f3L3FlowPointHistoryEntry 1 } f3L3FlowPointHistoryTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time of history bin creation." ::= { f3L3FlowPointHistoryEntry 2 } f3L3FlowPointHistoryValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { f3L3FlowPointHistoryEntry 3 } f3L3FlowPointHistoryAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { f3L3FlowPointHistoryEntry 4 } f3L3FlowPointHistoryFMG OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Frames Marked Green." ::= { f3L3FlowPointHistoryEntry 5 } f3L3FlowPointHistoryFMY OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Frames Marked Yellow." ::= { f3L3FlowPointHistoryEntry 6 } f3L3FlowPointHistoryFMRD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Frames Marked Red and Discarded." ::= { f3L3FlowPointHistoryEntry 7 } f3L3FlowPointHistoryFTD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Frames Tail Dropped." ::= { f3L3FlowPointHistoryEntry 8 } f3L3FlowPointHistoryFragmentedDropAcl OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of dropped fragmented packets." ::= { f3L3FlowPointHistoryEntry 9 } f3L3FlowPointHistoryAclRuleDrop OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of dropped packets due to ACL rule." ::= { f3L3FlowPointHistoryEntry 10 } f3L3FlowPointHistoryTtlEqual1Drop OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION " the number of dropped packets due to ttl's value is 1." ::= { f3L3FlowPointHistoryEntry 11 } f3L3FlowPointHistoryFrameTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of total transmitted frames." ::= { f3L3FlowPointHistoryEntry 12 } f3L3FlowPointHistoryFrameRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION " the number of total recieved frames." ::= { f3L3FlowPointHistoryEntry 13 } f3L3FlowPointHistoryNoRouteDrop OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION " the number of frames dropped due to no route." ::= { f3L3FlowPointHistoryEntry 14 } f3L3FlowPointHistoryHopLimitDrop OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION " the number of frames dropped due to hop limit." ::= { f3L3FlowPointHistoryEntry 15 } -- -- L3 Flow Point Threshold Table -- f3L3FlowPointThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3FlowPointThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of entries that allow manageability of L3 Flow Point Thresholds." ::= { f3L3Performance 3 } f3L3FlowPointThresholdEntry OBJECT-TYPE SYNTAX F3L3FlowPointThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3FlowPointThresholdTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3FlowPointStatsIndex, f3L3FlowPointThresholdIndex } ::= { f3L3FlowPointThresholdTable 1 } F3L3FlowPointThresholdEntry ::= SEQUENCE { f3L3FlowPointThresholdIndex Integer32, f3L3FlowPointThresholdInterval CmPmIntervalType, f3L3FlowPointThresholdVariable VariablePointer, f3L3FlowPointThresholdValueLo Unsigned32, f3L3FlowPointThresholdValueHi Unsigned32, f3L3FlowPointThresholdMonValue Counter64 } f3L3FlowPointThresholdIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies an entry in the f3L3FlowPointThresholdTable." ::= { f3L3FlowPointThresholdEntry 1 } f3L3FlowPointThresholdInterval OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "The interval over which monitored value is sampled and compared with the specified threshold." ::= { f3L3FlowPointThresholdEntry 2 } f3L3FlowPointThresholdVariable OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "The object identifier of the particular variable to be sampled." ::= { f3L3FlowPointThresholdEntry 3 } f3L3FlowPointThresholdValueLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Lower 32 bits of the threshold value." ::= { f3L3FlowPointThresholdEntry 4 } f3L3FlowPointThresholdValueHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Higher 32 bits of the threshold value." ::= { f3L3FlowPointThresholdEntry 5 } f3L3FlowPointThresholdMonValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Monitored value corresponding to f3L3FlowPointThresholdVariable." ::= { f3L3FlowPointThresholdEntry 6 } -- -- L3 traffic ip interface Current Statistics Table -- f3L3TrafficIpInterfaceStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIpInterfaceStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of L3 traffic ip interface related statistics. These reflect the current data." ::= { f3L3Performance 4 } f3L3TrafficIpInterfaceStatsEntry OBJECT-TYPE SYNTAX F3L3TrafficIpInterfaceStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficIpInterfaceStatsTable. Entries exist in this table for each L3 traffic ip interface." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPIfIndex, f3L3TrafficIpInterfaceStatsIndex } ::= { f3L3TrafficIpInterfaceStatsTable 1 } F3L3TrafficIpInterfaceStatsEntry ::= SEQUENCE { f3L3TrafficIpInterfaceStatsIndex Integer32, f3L3TrafficIpInterfaceStatsIntervalType CmPmIntervalType, f3L3TrafficIpInterfaceStatsValid TruthValue, f3L3TrafficIpInterfaceStatsAction CmPmBinAction, f3L3TrafficIpInterfaceStatsDhcpTx PerfCounter64, f3L3TrafficIpInterfaceStatsDhcpRx PerfCounter64, f3L3TrafficIpInterfaceStatsIcmpTx PerfCounter64, f3L3TrafficIpInterfaceStatsIcmpRx PerfCounter64, f3L3TrafficIpInterfaceStatsArpReqTx PerfCounter64, f3L3TrafficIpInterfaceStatsArpReqRx PerfCounter64, f3L3TrafficIpInterfaceStatsArpReplyTx PerfCounter64, f3L3TrafficIpInterfaceStatsArpReplyRx PerfCounter64, f3L3TrafficIpInterfaceStatsDhcpV6Tx PerfCounter64, f3L3TrafficIpInterfaceStatsDhcpV6Rx PerfCounter64, f3L3TrafficIpInterfaceStatsIcmpV6WONdpTx PerfCounter64, f3L3TrafficIpInterfaceStatsIcmpV6WONdpRx PerfCounter64, f3L3TrafficIpInterfaceStatsNdpNSTx PerfCounter64, f3L3TrafficIpInterfaceStatsNdpNSRx PerfCounter64, f3L3TrafficIpInterfaceStatsNdpNATx PerfCounter64, f3L3TrafficIpInterfaceStatsNdpNARx PerfCounter64, f3L3TrafficIpInterfaceStatsNdpRATx PerfCounter64, f3L3TrafficIpInterfaceStatsNdpRARx PerfCounter64, f3L3TrafficIpInterfaceStatsNdpRSTx PerfCounter64, f3L3TrafficIpInterfaceStatsNdpRSRx PerfCounter64 } f3L3TrafficIpInterfaceStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min" ::= { f3L3TrafficIpInterfaceStatsEntry 1 } f3L3TrafficIpInterfaceStatsIntervalType OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "Interval over which Performance Monitoring data is collected." ::= { f3L3TrafficIpInterfaceStatsEntry 2 } f3L3TrafficIpInterfaceStatsValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { f3L3TrafficIpInterfaceStatsEntry 3 } f3L3TrafficIpInterfaceStatsAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { f3L3TrafficIpInterfaceStatsEntry 4 } f3L3TrafficIpInterfaceStatsDhcpTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets DHCP Transmit." ::= { f3L3TrafficIpInterfaceStatsEntry 5 } f3L3TrafficIpInterfaceStatsDhcpRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets DHCP Recieved." ::= { f3L3TrafficIpInterfaceStatsEntry 6 } f3L3TrafficIpInterfaceStatsIcmpTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets Icmp protocol transmit." ::= { f3L3TrafficIpInterfaceStatsEntry 7 } f3L3TrafficIpInterfaceStatsIcmpRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets Icmp protocol recieved." ::= { f3L3TrafficIpInterfaceStatsEntry 8 } f3L3TrafficIpInterfaceStatsArpReqTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmit packets due to ARP request." ::= { f3L3TrafficIpInterfaceStatsEntry 9 } f3L3TrafficIpInterfaceStatsArpReqRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of recieved packets due to ARP request." ::= { f3L3TrafficIpInterfaceStatsEntry 10 } f3L3TrafficIpInterfaceStatsArpReplyTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmit packets due to ARP reply." ::= { f3L3TrafficIpInterfaceStatsEntry 11 } f3L3TrafficIpInterfaceStatsArpReplyRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of recieved packets due to ARP reply." ::= { f3L3TrafficIpInterfaceStatsEntry 12 } f3L3TrafficIpInterfaceStatsDhcpV6Tx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets DHCPv6 Transmit." ::= { f3L3TrafficIpInterfaceStatsEntry 13 } f3L3TrafficIpInterfaceStatsDhcpV6Rx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets DHCPv6 Recieved." ::= { f3L3TrafficIpInterfaceStatsEntry 14 } f3L3TrafficIpInterfaceStatsIcmpV6WONdpTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets Icmpv6 protocol transmit." ::= { f3L3TrafficIpInterfaceStatsEntry 15 } f3L3TrafficIpInterfaceStatsIcmpV6WONdpRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets Icmpv6 protocol recieved." ::= { f3L3TrafficIpInterfaceStatsEntry 16 } f3L3TrafficIpInterfaceStatsNdpNSTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmit NS message." ::= { f3L3TrafficIpInterfaceStatsEntry 17 } f3L3TrafficIpInterfaceStatsNdpNSRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of recieved NS message." ::= { f3L3TrafficIpInterfaceStatsEntry 18 } f3L3TrafficIpInterfaceStatsNdpNATx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmit NA message." ::= { f3L3TrafficIpInterfaceStatsEntry 19 } f3L3TrafficIpInterfaceStatsNdpNARx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of recieved NA message." ::= { f3L3TrafficIpInterfaceStatsEntry 20 } f3L3TrafficIpInterfaceStatsNdpRATx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmit RA message." ::= { f3L3TrafficIpInterfaceStatsEntry 21 } f3L3TrafficIpInterfaceStatsNdpRARx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of recieved RA message." ::= { f3L3TrafficIpInterfaceStatsEntry 22 } f3L3TrafficIpInterfaceStatsNdpRSTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmit RS message." ::= { f3L3TrafficIpInterfaceStatsEntry 23 } f3L3TrafficIpInterfaceStatsNdpRSRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of recieved RS message." ::= { f3L3TrafficIpInterfaceStatsEntry 24 } -- -- L3 traffic ip interface history Statistics Table -- f3L3TrafficIpInterfaceHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIpInterfaceHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of L3 traffic ip interface related history statistics. These reflect the history data." ::= { f3L3Performance 5 } f3L3TrafficIpInterfaceHistoryEntry OBJECT-TYPE SYNTAX F3L3TrafficIpInterfaceHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficIpInterfaceHistoryTable. Entries exist in this table for each L3 traffic ip interface." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPIfIndex, f3L3TrafficIpInterfaceStatsIndex, f3L3TrafficIpInterfaceHistoryIndex } ::= { f3L3TrafficIpInterfaceHistoryTable 1 } F3L3TrafficIpInterfaceHistoryEntry ::= SEQUENCE { f3L3TrafficIpInterfaceHistoryIndex Integer32, f3L3TrafficIpInterfaceHistoryTime DateAndTime, f3L3TrafficIpInterfaceHistoryValid TruthValue, f3L3TrafficIpInterfaceHistoryAction CmPmBinAction, f3L3TrafficIpInterfaceHistoryDhcpTx PerfCounter64, f3L3TrafficIpInterfaceHistoryDhcpRx PerfCounter64, f3L3TrafficIpInterfaceHistoryIcmpTx PerfCounter64, f3L3TrafficIpInterfaceHistoryIcmpRx PerfCounter64, f3L3TrafficIpInterfaceHistoryArpReqTx PerfCounter64, f3L3TrafficIpInterfaceHistoryArpReqRx PerfCounter64, f3L3TrafficIpInterfaceHistoryArpReplyTx PerfCounter64, f3L3TrafficIpInterfaceHistoryArpReplyRx PerfCounter64, f3L3TrafficIpInterfaceHistoryDhcpV6Tx PerfCounter64, f3L3TrafficIpInterfaceHistoryDhcpV6Rx PerfCounter64, f3L3TrafficIpInterfaceHistoryIcmpV6WONdpTx PerfCounter64, f3L3TrafficIpInterfaceHistoryIcmpV6WONdpRx PerfCounter64, f3L3TrafficIpInterfaceHistoryNdpNSTx PerfCounter64, f3L3TrafficIpInterfaceHistoryNdpNSRx PerfCounter64, f3L3TrafficIpInterfaceHistoryNdpNATx PerfCounter64, f3L3TrafficIpInterfaceHistoryNdpNARx PerfCounter64, f3L3TrafficIpInterfaceHistoryNdpRATx PerfCounter64, f3L3TrafficIpInterfaceHistoryNdpRARx PerfCounter64, f3L3TrafficIpInterfaceHistoryNdpRSTx PerfCounter64, f3L3TrafficIpInterfaceHistoryNdpRSRx PerfCounter64 } f3L3TrafficIpInterfaceHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify the history bin" ::= { f3L3TrafficIpInterfaceHistoryEntry 1 } f3L3TrafficIpInterfaceHistoryTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time of history bin creation." ::= { f3L3TrafficIpInterfaceHistoryEntry 2 } f3L3TrafficIpInterfaceHistoryValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { f3L3TrafficIpInterfaceHistoryEntry 3 } f3L3TrafficIpInterfaceHistoryAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { f3L3TrafficIpInterfaceHistoryEntry 4 } f3L3TrafficIpInterfaceHistoryDhcpTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets DHCP Transmit." ::= { f3L3TrafficIpInterfaceHistoryEntry 5 } f3L3TrafficIpInterfaceHistoryDhcpRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets DHCP Recieved." ::= { f3L3TrafficIpInterfaceHistoryEntry 6 } f3L3TrafficIpInterfaceHistoryIcmpTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets Icmp protocol transmit." ::= { f3L3TrafficIpInterfaceHistoryEntry 7 } f3L3TrafficIpInterfaceHistoryIcmpRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets Icmp protocol recieved." ::= { f3L3TrafficIpInterfaceHistoryEntry 8 } f3L3TrafficIpInterfaceHistoryArpReqTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmit packets due to ARP request." ::= { f3L3TrafficIpInterfaceHistoryEntry 9 } f3L3TrafficIpInterfaceHistoryArpReqRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION " the number of recieved packets due to ARP request." ::= { f3L3TrafficIpInterfaceHistoryEntry 10 } f3L3TrafficIpInterfaceHistoryArpReplyTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmit packets due to ARP reply." ::= { f3L3TrafficIpInterfaceHistoryEntry 11 } f3L3TrafficIpInterfaceHistoryArpReplyRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION " the number of recieved packets due to ARP reply." ::= { f3L3TrafficIpInterfaceHistoryEntry 12 } f3L3TrafficIpInterfaceHistoryDhcpV6Tx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets DHCPv6 Transmit." ::= { f3L3TrafficIpInterfaceHistoryEntry 13 } f3L3TrafficIpInterfaceHistoryDhcpV6Rx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets DHCPv6 Recieved." ::= { f3L3TrafficIpInterfaceHistoryEntry 14 } f3L3TrafficIpInterfaceHistoryIcmpV6WONdpTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets Icmpv6 protocol transmit." ::= { f3L3TrafficIpInterfaceHistoryEntry 15 } f3L3TrafficIpInterfaceHistoryIcmpV6WONdpRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets Icmpv6 protocol recieved." ::= { f3L3TrafficIpInterfaceHistoryEntry 16 } f3L3TrafficIpInterfaceHistoryNdpNSTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmit NS message." ::= { f3L3TrafficIpInterfaceHistoryEntry 17 } f3L3TrafficIpInterfaceHistoryNdpNSRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of recieved NS message." ::= { f3L3TrafficIpInterfaceHistoryEntry 18 } f3L3TrafficIpInterfaceHistoryNdpNATx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmit NA message." ::= { f3L3TrafficIpInterfaceHistoryEntry 19 } f3L3TrafficIpInterfaceHistoryNdpNARx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of recieved NA message." ::= { f3L3TrafficIpInterfaceHistoryEntry 20 } f3L3TrafficIpInterfaceHistoryNdpRATx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmit RA message." ::= { f3L3TrafficIpInterfaceHistoryEntry 21 } f3L3TrafficIpInterfaceHistoryNdpRARx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of recieved RA message." ::= { f3L3TrafficIpInterfaceHistoryEntry 22 } f3L3TrafficIpInterfaceHistoryNdpRSTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmit RS message." ::= { f3L3TrafficIpInterfaceHistoryEntry 23 } f3L3TrafficIpInterfaceHistoryNdpRSRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of recieved RS message." ::= { f3L3TrafficIpInterfaceHistoryEntry 24 } -- -- L3 traffic ip interface Threshold Table -- f3L3TrafficIpInterfaceThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIpInterfaceThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of entries that allow manageability of L3 traffic ip interface Thresholds." ::= { f3L3Performance 6 } f3L3TrafficIpInterfaceThresholdEntry OBJECT-TYPE SYNTAX F3L3TrafficIpInterfaceThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficIpInterfaceThresholdTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPIfIndex, f3L3TrafficIpInterfaceStatsIndex, f3L3TrafficIpInterfaceThresholdIndex } ::= { f3L3TrafficIpInterfaceThresholdTable 1 } F3L3TrafficIpInterfaceThresholdEntry ::= SEQUENCE { f3L3TrafficIpInterfaceThresholdIndex Integer32, f3L3TrafficIpInterfaceThresholdInterval CmPmIntervalType, f3L3TrafficIpInterfaceThresholdVariable VariablePointer, f3L3TrafficIpInterfaceThresholdValueLo Unsigned32, f3L3TrafficIpInterfaceThresholdValueHi Unsigned32, f3L3TrafficIpInterfaceThresholdMonValue Counter64 } f3L3TrafficIpInterfaceThresholdIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies an entry in the f3L3TrafficIpInterfaceThresholdTable." ::= { f3L3TrafficIpInterfaceThresholdEntry 1 } f3L3TrafficIpInterfaceThresholdInterval OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "The interval over which monitored value is sampled and compared with the specified threshold." ::= { f3L3TrafficIpInterfaceThresholdEntry 2 } f3L3TrafficIpInterfaceThresholdVariable OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "The object identifier of the particular variable to be sampled." ::= { f3L3TrafficIpInterfaceThresholdEntry 3 } f3L3TrafficIpInterfaceThresholdValueLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Lower 32 bits of the threshold value." ::= { f3L3TrafficIpInterfaceThresholdEntry 4 } f3L3TrafficIpInterfaceThresholdValueHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Higher 32 bits of the threshold value." ::= { f3L3TrafficIpInterfaceThresholdEntry 5 } f3L3TrafficIpInterfaceThresholdMonValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Monitored value corresponding to f3L3TrafficIpInterfaceThresholdVariable." ::= { f3L3TrafficIpInterfaceThresholdEntry 6 } -- -- L3 acl rule Current Statistics Table -- f3L3AclRuleStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3AclRuleStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of L3 acl rule related statistics. These reflect the current data." ::= { f3L3Performance 7 } f3L3AclRuleStatsEntry OBJECT-TYPE SYNTAX F3L3AclRuleStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3AclRuleStatsTable. Entries exist in this table for each Acl rule." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L3AclRuleParentIndex, f3L3AclRuleIndex, f3L3AclRuleStatsIndex } ::= { f3L3AclRuleStatsTable 1 } F3L3AclRuleStatsEntry ::= SEQUENCE { f3L3AclRuleStatsIndex Integer32, f3L3AclRuleStatsIntervalType CmPmIntervalType, f3L3AclRuleStatsValid TruthValue, f3L3AclRuleStatsAction CmPmBinAction, f3L3AclRuleStatsRuleMatch PerfCounter64 } f3L3AclRuleStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min" ::= { f3L3AclRuleStatsEntry 1 } f3L3AclRuleStatsIntervalType OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "Interval over which Performance Monitoring data is collected." ::= { f3L3AclRuleStatsEntry 2 } f3L3AclRuleStatsValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { f3L3AclRuleStatsEntry 3 } f3L3AclRuleStatsAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { f3L3AclRuleStatsEntry 4 } f3L3AclRuleStatsRuleMatch OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets matching the ACL rule." ::= { f3L3AclRuleStatsEntry 5 } -- -- L3 acl rule history Statistics Table -- f3L3AclRuleHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3AclRuleHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of L3 acl rule related history statistics. These reflect the history data." ::= { f3L3Performance 8 } f3L3AclRuleHistoryEntry OBJECT-TYPE SYNTAX F3L3AclRuleHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3AclRuleHistoryTable. Entries exist in this table for each L3 acl rule." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L3AclRuleParentIndex, f3L3AclRuleIndex, f3L3AclRuleStatsIndex, f3L3AclRuleHistoryIndex } ::= { f3L3AclRuleHistoryTable 1 } F3L3AclRuleHistoryEntry ::= SEQUENCE { f3L3AclRuleHistoryIndex Integer32, f3L3AclRuleHistoryTime DateAndTime, f3L3AclRuleHistoryValid TruthValue, f3L3AclRuleHistoryAction CmPmBinAction, f3L3AclRuleHistoryRuleMatch PerfCounter64 } f3L3AclRuleHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify the history bin." ::= { f3L3AclRuleHistoryEntry 1 } f3L3AclRuleHistoryTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time of history bin creation." ::= { f3L3AclRuleHistoryEntry 2 } f3L3AclRuleHistoryValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { f3L3AclRuleHistoryEntry 3 } f3L3AclRuleHistoryAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { f3L3AclRuleHistoryEntry 4 } f3L3AclRuleHistoryRuleMatch OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets matching acl rule." ::= { f3L3AclRuleHistoryEntry 5 } -- -- L3 acl rule Threshold Table -- f3L3AclRuleThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3AclRuleThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of entries that allow manageability of L3 acl rule Thresholds." ::= { f3L3Performance 9 } f3L3AclRuleThresholdEntry OBJECT-TYPE SYNTAX F3L3AclRuleThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3AclRuleThresholdTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L3AclRuleParentIndex, f3L3AclRuleIndex, f3L3AclRuleStatsIndex, f3L3AclRuleThresholdIndex } ::= { f3L3AclRuleThresholdTable 1 } F3L3AclRuleThresholdEntry ::= SEQUENCE { f3L3AclRuleThresholdIndex Integer32, f3L3AclRuleThresholdInterval CmPmIntervalType, f3L3AclRuleThresholdVariable VariablePointer, f3L3AclRuleThresholdValueLo Unsigned32, f3L3AclRuleThresholdValueHi Unsigned32, f3L3AclRuleThresholdMonValue Counter64 } f3L3AclRuleThresholdIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies an entry in the f3L3AclRuleThresholdTable." ::= { f3L3AclRuleThresholdEntry 1 } f3L3AclRuleThresholdInterval OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "The interval over which monitored value is sampled and compared with the specified threshold." ::= { f3L3AclRuleThresholdEntry 2 } f3L3AclRuleThresholdVariable OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "The object identifier of the particular variable to be sampled." ::= { f3L3AclRuleThresholdEntry 3 } f3L3AclRuleThresholdValueLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Lower 32 bits of the threshold value." ::= { f3L3AclRuleThresholdEntry 4 } f3L3AclRuleThresholdValueHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Higher 32 bits of the threshold value." ::= { f3L3AclRuleThresholdEntry 5 } f3L3AclRuleThresholdMonValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Monitored value corresponding to f3L3AclRuleThresholdVariable." ::= { f3L3AclRuleThresholdEntry 6 } -- -- Quality of Service(QOS) Policer Current Statistics Table -- f3L3QosPolicerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3QosPolicerStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of QOS Policer statistics. These reflect the current data." ::= { f3L3Performance 10 } f3L3QosPolicerStatsEntry OBJECT-TYPE SYNTAX F3L3QosPolicerStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3QosPolicerStatsTable. Entries exist in this table for each l3 flow point policer." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3QosPolicerIndex, f3L3QosPolicerStatsIndex } ::= { f3L3QosPolicerStatsTable 1 } F3L3QosPolicerStatsEntry ::= SEQUENCE { f3L3QosPolicerStatsIndex Integer32, f3L3QosPolicerStatsIntervalType CmPmIntervalType, f3L3QosPolicerStatsValid TruthValue, f3L3QosPolicerStatsAction CmPmBinAction, f3L3QosPolicerStatsFMG PerfCounter64, f3L3QosPolicerStatsFMY PerfCounter64, f3L3QosPolicerStatsFMYD PerfCounter64, f3L3QosPolicerStatsFMRD PerfCounter64, f3L3QosPolicerStatsBytesIn PerfCounter64, f3L3QosPolicerStatsBytesOut PerfCounter64, f3L3QosPolicerStatsABR PerfCounter64 } f3L3QosPolicerStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this QOS Policer statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min" ::= { f3L3QosPolicerStatsEntry 1 } f3L3QosPolicerStatsIntervalType OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "Interval over which Performance Monitoring data is collected." ::= { f3L3QosPolicerStatsEntry 2 } f3L3QosPolicerStatsValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { f3L3QosPolicerStatsEntry 3 } f3L3QosPolicerStatsAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { f3L3QosPolicerStatsEntry 4 } f3L3QosPolicerStatsFMG OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Marked Green." ::= { f3L3QosPolicerStatsEntry 5 } f3L3QosPolicerStatsFMY OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Marked Yellow." ::= { f3L3QosPolicerStatsEntry 6 } f3L3QosPolicerStatsFMYD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Frames Marked Yellow and Dropped." ::= { f3L3QosPolicerStatsEntry 7 } f3L3QosPolicerStatsFMRD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Marked Red and Discarded." ::= { f3L3QosPolicerStatsEntry 8 } f3L3QosPolicerStatsBytesIn OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes received by the Policer." ::= { f3L3QosPolicerStatsEntry 9 } f3L3QosPolicerStatsBytesOut OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes transmitted by the Policer." ::= { f3L3QosPolicerStatsEntry 10 } f3L3QosPolicerStatsABR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average Bit Rate on the Policer." ::= { f3L3QosPolicerStatsEntry 11 } -- -- Quality of Service(QOS) Policer History Statistics Table -- f3L3QosPolicerHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3QosPolicerHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of QOS Policer statistics. These reflect the current data." ::= { f3L3Performance 11 } f3L3QosPolicerHistoryEntry OBJECT-TYPE SYNTAX F3L3QosPolicerHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3QosPolicerHistoryTable. Entries exist in this table for each flow point policer." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3QosPolicerIndex, f3L3QosPolicerStatsIndex, f3L3QosPolicerHistoryIndex } ::= { f3L3QosPolicerHistoryTable 1 } F3L3QosPolicerHistoryEntry ::= SEQUENCE { f3L3QosPolicerHistoryIndex Integer32, f3L3QosPolicerHistoryTime DateAndTime, f3L3QosPolicerHistoryValid TruthValue, f3L3QosPolicerHistoryAction CmPmBinAction, f3L3QosPolicerHistoryFMG PerfCounter64, f3L3QosPolicerHistoryFMY PerfCounter64, f3L3QosPolicerHistoryFMYD PerfCounter64, f3L3QosPolicerHistoryFMRD PerfCounter64, f3L3QosPolicerHistoryBytesIn PerfCounter64, f3L3QosPolicerHistoryBytesOut PerfCounter64, f3L3QosPolicerHistoryABR PerfCounter64 } f3L3QosPolicerHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this QOS Policer history entry." ::= { f3L3QosPolicerHistoryEntry 1 } f3L3QosPolicerHistoryTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time of history bin creation." ::= { f3L3QosPolicerHistoryEntry 2 } f3L3QosPolicerHistoryValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { f3L3QosPolicerHistoryEntry 3 } f3L3QosPolicerHistoryAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { f3L3QosPolicerHistoryEntry 4 } f3L3QosPolicerHistoryFMG OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Marked Green." ::= { f3L3QosPolicerHistoryEntry 5 } f3L3QosPolicerHistoryFMY OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Marked Yellow." ::= { f3L3QosPolicerHistoryEntry 6 } f3L3QosPolicerHistoryFMYD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Frames Marked Yellow and Dropped." ::= { f3L3QosPolicerHistoryEntry 7 } f3L3QosPolicerHistoryFMRD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Marked Red and Discarded." ::= { f3L3QosPolicerHistoryEntry 8 } f3L3QosPolicerHistoryBytesIn OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes received by the Policer." ::= { f3L3QosPolicerHistoryEntry 9 } f3L3QosPolicerHistoryBytesOut OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes transmitted by the Policer." ::= { f3L3QosPolicerHistoryEntry 10 } f3L3QosPolicerHistoryABR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average Bit Rate on the Policer." ::= { f3L3QosPolicerHistoryEntry 11 } -- -- QOS Policer Threshold Table -- f3L3QosPolicerThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3QosPolicerThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of entries that allow manageability of QOS Policer Thresholds." ::= { f3L3Performance 12 } f3L3QosPolicerThresholdEntry OBJECT-TYPE SYNTAX F3L3QosPolicerThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3QosPolicerThresholdTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3QosPolicerIndex, f3L3QosPolicerStatsIndex, f3L3QosPolicerThresholdIndex } ::= { f3L3QosPolicerThresholdTable 1 } F3L3QosPolicerThresholdEntry ::= SEQUENCE { f3L3QosPolicerThresholdIndex Integer32, f3L3QosPolicerThresholdInterval CmPmIntervalType, f3L3QosPolicerThresholdVariable VariablePointer, f3L3QosPolicerThresholdValueLo Unsigned32, f3L3QosPolicerThresholdValueHi Unsigned32, f3L3QosPolicerThresholdMonValue Counter64 } f3L3QosPolicerThresholdIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies an entry in the f3L3QosPolicerThresholdTable." ::= { f3L3QosPolicerThresholdEntry 1 } f3L3QosPolicerThresholdInterval OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "The interval over which monitored value is sampled and compared with the specified threshold." ::= { f3L3QosPolicerThresholdEntry 2 } f3L3QosPolicerThresholdVariable OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "The object identifier of the particular variable to be sampled." ::= { f3L3QosPolicerThresholdEntry 3 } f3L3QosPolicerThresholdValueLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Lower 32 bits of the threshold value." ::= { f3L3QosPolicerThresholdEntry 4 } f3L3QosPolicerThresholdValueHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Higher 32 bits of the threshold value." ::= { f3L3QosPolicerThresholdEntry 5 } f3L3QosPolicerThresholdMonValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Monitored value corresponding to f3L3QosPolicerThresholdVariable." ::= { f3L3QosPolicerThresholdEntry 6 } -- -- L3 flow point Level Quality of Service(QOS) Shaper Current Statistics Table -- f3L3QosShaperStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3QosShaperStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of L3 flow point Level QOS Shaper statistics. These reflect the current data." ::= { f3L3Performance 13 } f3L3QosShaperStatsEntry OBJECT-TYPE SYNTAX F3L3QosShaperStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3QosShaperStatsTable. Entries exist in this table for each QOS Shaper per L3 flow point." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3QosShaperIndex, f3L3QosShaperStatsIndex } ::= { f3L3QosShaperStatsTable 1 } F3L3QosShaperStatsEntry ::= SEQUENCE { f3L3QosShaperStatsIndex Integer32, f3L3QosShaperStatsIntervalType CmPmIntervalType, f3L3QosShaperStatsValid TruthValue, f3L3QosShaperStatsAction CmPmBinAction, f3L3QosShaperStatsBT PerfCounter64, f3L3QosShaperStatsBTD PerfCounter64, f3L3QosShaperStatsFD PerfCounter64, f3L3QosShaperStatsFTD PerfCounter64, f3L3QosShaperStatsBR PerfCounter64, f3L3QosShaperStatsFR PerfCounter64, f3L3QosShaperStatsABRRL PerfCounter64, f3L3QosShaperStatsABRRLR PerfCounter64, f3L3QosShaperStatsBREDD PerfCounter64, f3L3QosShaperStatsFREDD PerfCounter64 } f3L3QosShaperStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this QOS Shaper statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min" ::= { f3L3QosShaperStatsEntry 1 } f3L3QosShaperStatsIntervalType OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "Interval over which Performance Monitoring data is collected." ::= { f3L3QosShaperStatsEntry 2 } f3L3QosShaperStatsValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { f3L3QosShaperStatsEntry 3 } f3L3QosShaperStatsAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { f3L3QosShaperStatsEntry 4 } f3L3QosShaperStatsBT OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Transmitted." ::= { f3L3QosShaperStatsEntry 5 } f3L3QosShaperStatsBTD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Tail Dropped." ::= { f3L3QosShaperStatsEntry 6 } f3L3QosShaperStatsFD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Dequeued." ::= { f3L3QosShaperStatsEntry 7 } f3L3QosShaperStatsFTD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Tail Dropped." ::= { f3L3QosShaperStatsEntry 8 } f3L3QosShaperStatsBR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Replicated." ::= { f3L3QosShaperStatsEntry 9 } f3L3QosShaperStatsFR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Replicated." ::= { f3L3QosShaperStatsEntry 10 } f3L3QosShaperStatsABRRL OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average Bit Rate - Rate Limited." ::= { f3L3QosShaperStatsEntry 11 } f3L3QosShaperStatsABRRLR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average Bit Rate - Rate Limited, Replicated." ::= { f3L3QosShaperStatsEntry 12 } f3L3QosShaperStatsBREDD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Random Early Discard, Dropped." ::= { f3L3QosShaperStatsEntry 13 } f3L3QosShaperStatsFREDD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Random Early Discard, Dropped." ::= { f3L3QosShaperStatsEntry 14 } -- -- Quality of Service(QOS) Shaper History Statistics Table -- f3L3QosShaperHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3QosShaperHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of l3 flow point Level QOS Shaper statistics. These reflect the history data." ::= { f3L3Performance 14 } f3L3QosShaperHistoryEntry OBJECT-TYPE SYNTAX F3L3QosShaperHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3QosShaperHistoryTable. Entries exist in this table for each Shaper per l3 flow point." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3QosShaperIndex, f3L3QosShaperStatsIndex, f3L3QosShaperHistoryIndex } ::= { f3L3QosShaperHistoryTable 1 } F3L3QosShaperHistoryEntry ::= SEQUENCE { f3L3QosShaperHistoryIndex Integer32, f3L3QosShaperHistoryTime DateAndTime, f3L3QosShaperHistoryValid TruthValue, f3L3QosShaperHistoryAction CmPmBinAction, f3L3QosShaperHistoryBT PerfCounter64, f3L3QosShaperHistoryBTD PerfCounter64, f3L3QosShaperHistoryFD PerfCounter64, f3L3QosShaperHistoryFTD PerfCounter64, f3L3QosShaperHistoryBR PerfCounter64, f3L3QosShaperHistoryFR PerfCounter64, f3L3QosShaperHistoryABRRL PerfCounter64, f3L3QosShaperHistoryABRRLR PerfCounter64, f3L3QosShaperHistoryBREDD PerfCounter64, f3L3QosShaperHistoryFREDD PerfCounter64 } f3L3QosShaperHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this QOS Shaper statistics entry." ::= { f3L3QosShaperHistoryEntry 1 } f3L3QosShaperHistoryTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time of history bin creation." ::= { f3L3QosShaperHistoryEntry 2 } f3L3QosShaperHistoryValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { f3L3QosShaperHistoryEntry 3 } f3L3QosShaperHistoryAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { f3L3QosShaperHistoryEntry 4 } f3L3QosShaperHistoryBT OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Transmitted." ::= { f3L3QosShaperHistoryEntry 5 } f3L3QosShaperHistoryBTD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Tail Dropped." ::= { f3L3QosShaperHistoryEntry 6 } f3L3QosShaperHistoryFD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Dequeued." ::= { f3L3QosShaperHistoryEntry 7 } f3L3QosShaperHistoryFTD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Tail Dropped." ::= { f3L3QosShaperHistoryEntry 8 } f3L3QosShaperHistoryBR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Replicated." ::= { f3L3QosShaperHistoryEntry 9 } f3L3QosShaperHistoryFR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Replicated." ::= { f3L3QosShaperHistoryEntry 10 } f3L3QosShaperHistoryABRRL OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average Bit Rate - Rate Limited." ::= { f3L3QosShaperHistoryEntry 11 } f3L3QosShaperHistoryABRRLR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average Bit Rate - Rate Limited, Replicated." ::= { f3L3QosShaperHistoryEntry 12 } f3L3QosShaperHistoryBREDD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Random Early Discard, Dropped." ::= { f3L3QosShaperHistoryEntry 13 } f3L3QosShaperHistoryFREDD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Random Early Discard, Dropped." ::= { f3L3QosShaperHistoryEntry 14 } -- -- L3 flow point QOS Shaper Threshold Table -- f3L3QosShaperThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3QosShaperThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of entries that allow manageability of QOS Shaper Thresholds." ::= { f3L3Performance 15 } f3L3QosShaperThresholdEntry OBJECT-TYPE SYNTAX F3L3QosShaperThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3QosShaperThresholdTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortTypeIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3QosShaperIndex, f3L3QosShaperStatsIndex, f3L3QosShaperThresholdIndex } ::= { f3L3QosShaperThresholdTable 1 } F3L3QosShaperThresholdEntry ::= SEQUENCE { f3L3QosShaperThresholdIndex Integer32, f3L3QosShaperThresholdInterval CmPmIntervalType, f3L3QosShaperThresholdVariable VariablePointer, f3L3QosShaperThresholdValueLo Unsigned32, f3L3QosShaperThresholdValueHi Unsigned32, f3L3QosShaperThresholdMonValue Counter64 } f3L3QosShaperThresholdIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies an entry in the f3L3QosShaperThresholdTable." ::= { f3L3QosShaperThresholdEntry 1 } f3L3QosShaperThresholdInterval OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "The interval over which monitored value is sampled and compared with the specified threshold." ::= { f3L3QosShaperThresholdEntry 2 } f3L3QosShaperThresholdVariable OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "The object identifier of the particular variable to be sampled." ::= { f3L3QosShaperThresholdEntry 3 } f3L3QosShaperThresholdValueLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Lower 32 bits of the threshold value." ::= { f3L3QosShaperThresholdEntry 4 } f3L3QosShaperThresholdValueHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Higher 32 bits of the threshold value." ::= { f3L3QosShaperThresholdEntry 5 } f3L3QosShaperThresholdMonValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Monitored value corresponding to f3L3QosShaperThresholdVariable." ::= { f3L3QosShaperThresholdEntry 6 } -- -- L3 A2N acl rule Current Statistics Table -- f3L2A2NAclRuleStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L2A2NAclRuleStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of L3 acl rule related statistics. These reflect the current data." ::= { f3L3Performance 16 } f3L2A2NAclRuleStatsEntry OBJECT-TYPE SYNTAX F3L2A2NAclRuleStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L2A2NAclRuleStatsTable. Entries exist in this table for each Acl rule." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L2A2NAclRuleParentIndex, f3L2A2NAclRuleIndex, f3L2A2NAclRuleStatsIndex } ::= { f3L2A2NAclRuleStatsTable 1 } F3L2A2NAclRuleStatsEntry ::= SEQUENCE { f3L2A2NAclRuleStatsIndex Integer32, f3L2A2NAclRuleStatsIntervalType CmPmIntervalType, f3L2A2NAclRuleStatsValid TruthValue, f3L2A2NAclRuleStatsAction CmPmBinAction, f3L2A2NAclRuleStatsRuleMatch PerfCounter64 } f3L2A2NAclRuleStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min" ::= { f3L2A2NAclRuleStatsEntry 1 } f3L2A2NAclRuleStatsIntervalType OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "Interval over which Performance Monitoring data is collected." ::= { f3L2A2NAclRuleStatsEntry 2 } f3L2A2NAclRuleStatsValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { f3L2A2NAclRuleStatsEntry 3 } f3L2A2NAclRuleStatsAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { f3L2A2NAclRuleStatsEntry 4 } f3L2A2NAclRuleStatsRuleMatch OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets matching the ACL rule." ::= { f3L2A2NAclRuleStatsEntry 5 } -- -- L3 acl rule history Statistics Table -- f3L2A2NAclRuleHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L2A2NAclRuleHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of L3 acl rule related history statistics. These reflect the history data." ::= { f3L3Performance 17 } f3L2A2NAclRuleHistoryEntry OBJECT-TYPE SYNTAX F3L2A2NAclRuleHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L2A2NAclRuleHistoryTable. Entries exist in this table for each L3 acl rule." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L2A2NAclRuleParentIndex, f3L2A2NAclRuleIndex, f3L2A2NAclRuleStatsIndex, f3L2A2NAclRuleHistoryIndex } ::= { f3L2A2NAclRuleHistoryTable 1 } F3L2A2NAclRuleHistoryEntry ::= SEQUENCE { f3L2A2NAclRuleHistoryIndex Integer32, f3L2A2NAclRuleHistoryTime DateAndTime, f3L2A2NAclRuleHistoryValid TruthValue, f3L2A2NAclRuleHistoryAction CmPmBinAction, f3L2A2NAclRuleHistoryRuleMatch PerfCounter64 } f3L2A2NAclRuleHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min" ::= { f3L2A2NAclRuleHistoryEntry 1 } f3L2A2NAclRuleHistoryTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time of history bin creation." ::= { f3L2A2NAclRuleHistoryEntry 2 } f3L2A2NAclRuleHistoryValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { f3L2A2NAclRuleHistoryEntry 3 } f3L2A2NAclRuleHistoryAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { f3L2A2NAclRuleHistoryEntry 4 } f3L2A2NAclRuleHistoryRuleMatch OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets matching acl rule." ::= { f3L2A2NAclRuleHistoryEntry 5 } -- -- L3 acl rule Threshold Table -- f3L2A2NAclRuleThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L2A2NAclRuleThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of entries that allow manageability of L3 acl rule Thresholds." ::= { f3L3Performance 18 } f3L2A2NAclRuleThresholdEntry OBJECT-TYPE SYNTAX F3L2A2NAclRuleThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L2A2NAclRuleThresholdTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L2A2NAclRuleParentIndex, f3L2A2NAclRuleIndex, f3L2A2NAclRuleStatsIndex, f3L2A2NAclRuleThresholdIndex } ::= { f3L2A2NAclRuleThresholdTable 1 } F3L2A2NAclRuleThresholdEntry ::= SEQUENCE { f3L2A2NAclRuleThresholdIndex Integer32, f3L2A2NAclRuleThresholdInterval CmPmIntervalType, f3L2A2NAclRuleThresholdVariable VariablePointer, f3L2A2NAclRuleThresholdValueLo Unsigned32, f3L2A2NAclRuleThresholdValueHi Unsigned32, f3L2A2NAclRuleThresholdMonValue Counter64 } f3L2A2NAclRuleThresholdIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies an entry in the f3L2A2NAclRuleThresholdTable." ::= { f3L2A2NAclRuleThresholdEntry 1 } f3L2A2NAclRuleThresholdInterval OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "The interval over which monitored value is sampled and compared with the specified threshold." ::= { f3L2A2NAclRuleThresholdEntry 2 } f3L2A2NAclRuleThresholdVariable OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "The object identifier of the particular variable to be sampled." ::= { f3L2A2NAclRuleThresholdEntry 3 } f3L2A2NAclRuleThresholdValueLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Lower 32 bits of the threshold value." ::= { f3L2A2NAclRuleThresholdEntry 4 } f3L2A2NAclRuleThresholdValueHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Higher 32 bits of the threshold value." ::= { f3L2A2NAclRuleThresholdEntry 5 } f3L2A2NAclRuleThresholdMonValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Monitored value corresponding to f3L2A2NAclRuleThresholdVariable." ::= { f3L2A2NAclRuleThresholdEntry 6 } -- -- L3 N2A acl rule Current Statistics Table -- f3L2N2AAclRuleStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L2N2AAclRuleStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of L3 acl rule related statistics. These reflect the current data." ::= { f3L3Performance 19 } f3L2N2AAclRuleStatsEntry OBJECT-TYPE SYNTAX F3L2N2AAclRuleStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L2N2AAclRuleStatsTable. Entries exist in this table for each Acl rule." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L2N2AAclRuleParentIndex, f3L2N2AAclRuleIndex, f3L2N2AAclRuleStatsIndex } ::= { f3L2N2AAclRuleStatsTable 1 } F3L2N2AAclRuleStatsEntry ::= SEQUENCE { f3L2N2AAclRuleStatsIndex Integer32, f3L2N2AAclRuleStatsIntervalType CmPmIntervalType, f3L2N2AAclRuleStatsValid TruthValue, f3L2N2AAclRuleStatsAction CmPmBinAction, f3L2N2AAclRuleStatsRuleMatch PerfCounter64 } f3L2N2AAclRuleStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min" ::= { f3L2N2AAclRuleStatsEntry 1 } f3L2N2AAclRuleStatsIntervalType OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "Interval over which Performance Monitoring data is collected." ::= { f3L2N2AAclRuleStatsEntry 2 } f3L2N2AAclRuleStatsValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { f3L2N2AAclRuleStatsEntry 3 } f3L2N2AAclRuleStatsAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { f3L2N2AAclRuleStatsEntry 4 } f3L2N2AAclRuleStatsRuleMatch OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets matching the ACL rule." ::= { f3L2N2AAclRuleStatsEntry 5 } -- -- L3 acl rule history Statistics Table -- f3L2N2AAclRuleHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L2N2AAclRuleHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of L3 acl rule related history statistics. These reflect the history data." ::= { f3L3Performance 20 } f3L2N2AAclRuleHistoryEntry OBJECT-TYPE SYNTAX F3L2N2AAclRuleHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L2N2AAclRuleHistoryTable. Entries exist in this table for each L3 acl rule." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L2N2AAclRuleParentIndex, f3L2N2AAclRuleIndex, f3L2N2AAclRuleStatsIndex, f3L2N2AAclRuleHistoryIndex } ::= { f3L2N2AAclRuleHistoryTable 1 } F3L2N2AAclRuleHistoryEntry ::= SEQUENCE { f3L2N2AAclRuleHistoryIndex Integer32, f3L2N2AAclRuleHistoryTime DateAndTime, f3L2N2AAclRuleHistoryValid TruthValue, f3L2N2AAclRuleHistoryAction CmPmBinAction, f3L2N2AAclRuleHistoryRuleMatch PerfCounter64 } f3L2N2AAclRuleHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min" ::= { f3L2N2AAclRuleHistoryEntry 1 } f3L2N2AAclRuleHistoryTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time of history bin creation." ::= { f3L2N2AAclRuleHistoryEntry 2 } f3L2N2AAclRuleHistoryValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { f3L2N2AAclRuleHistoryEntry 3 } f3L2N2AAclRuleHistoryAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { f3L2N2AAclRuleHistoryEntry 4 } f3L2N2AAclRuleHistoryRuleMatch OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets matching acl rule." ::= { f3L2N2AAclRuleHistoryEntry 5 } -- -- L3 acl rule Threshold Table -- f3L2N2AAclRuleThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L2N2AAclRuleThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of entries that allow manageability of L3 acl rule Thresholds." ::= { f3L3Performance 21 } f3L2N2AAclRuleThresholdEntry OBJECT-TYPE SYNTAX F3L2N2AAclRuleThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L2N2AAclRuleThresholdTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L2N2AAclRuleParentIndex, f3L2N2AAclRuleIndex, f3L2N2AAclRuleStatsIndex, f3L2N2AAclRuleThresholdIndex } ::= { f3L2N2AAclRuleThresholdTable 1 } F3L2N2AAclRuleThresholdEntry ::= SEQUENCE { f3L2N2AAclRuleThresholdIndex Integer32, f3L2N2AAclRuleThresholdInterval CmPmIntervalType, f3L2N2AAclRuleThresholdVariable VariablePointer, f3L2N2AAclRuleThresholdValueLo Unsigned32, f3L2N2AAclRuleThresholdValueHi Unsigned32, f3L2N2AAclRuleThresholdMonValue Counter64 } f3L2N2AAclRuleThresholdIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies an entry in the f3L2N2AAclRuleThresholdTable." ::= { f3L2N2AAclRuleThresholdEntry 1 } f3L2N2AAclRuleThresholdInterval OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "The interval over which monitored value is sampled and compared with the specified threshold." ::= { f3L2N2AAclRuleThresholdEntry 2 } f3L2N2AAclRuleThresholdVariable OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "The object identifier of the particular variable to be sampled." ::= { f3L2N2AAclRuleThresholdEntry 3 } f3L2N2AAclRuleThresholdValueLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Lower 32 bits of the threshold value." ::= { f3L2N2AAclRuleThresholdEntry 4 } f3L2N2AAclRuleThresholdValueHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Higher 32 bits of the threshold value." ::= { f3L2N2AAclRuleThresholdEntry 5 } f3L2N2AAclRuleThresholdMonValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Monitored value corresponding to f3L2N2AAclRuleThresholdVariable." ::= { f3L2N2AAclRuleThresholdEntry 6 } -- -- L3 traffic ipv6 interface Current Statistics Table -- f3L3TrafficIPv6InterfaceStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIPv6InterfaceStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of L3 traffic ipv6 interface related statistics. These reflect the current data." ::= { f3L3Performance 22 } f3L3TrafficIPv6InterfaceStatsEntry OBJECT-TYPE SYNTAX F3L3TrafficIPv6InterfaceStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficIPv6InterfaceStatsTable. Entries exist in this table for each L3 traffic ipv6 interface." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPv6IfIndex, f3L3TrafficIPv6InterfaceStatsIndex } ::= { f3L3TrafficIPv6InterfaceStatsTable 1 } F3L3TrafficIPv6InterfaceStatsEntry ::= SEQUENCE { f3L3TrafficIPv6InterfaceStatsIndex Integer32, f3L3TrafficIPv6InterfaceStatsIntervalType CmPmIntervalType, f3L3TrafficIPv6InterfaceStatsValid TruthValue, f3L3TrafficIPv6InterfaceStatsAction CmPmBinAction, f3L3TrafficIPv6InterfaceStatsDhcpV6Tx PerfCounter64, f3L3TrafficIPv6InterfaceStatsDhcpV6Rx PerfCounter64, f3L3TrafficIPv6InterfaceStatsIcmpV6WONdpTx PerfCounter64, f3L3TrafficIPv6InterfaceStatsIcmpV6WONdpRx PerfCounter64, f3L3TrafficIPv6InterfaceStatsNdpNSTx PerfCounter64, f3L3TrafficIPv6InterfaceStatsNdpNSRx PerfCounter64, f3L3TrafficIPv6InterfaceStatsNdpNATx PerfCounter64, f3L3TrafficIPv6InterfaceStatsNdpNARx PerfCounter64, f3L3TrafficIPv6InterfaceStatsNdpRATx PerfCounter64, f3L3TrafficIPv6InterfaceStatsNdpRARx PerfCounter64, f3L3TrafficIPv6InterfaceStatsNdpRSTx PerfCounter64, f3L3TrafficIPv6InterfaceStatsNdpRSRx PerfCounter64 } f3L3TrafficIPv6InterfaceStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this L3 Traffic IPv6 interface statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min" ::= { f3L3TrafficIPv6InterfaceStatsEntry 1 } f3L3TrafficIPv6InterfaceStatsIntervalType OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "Interval over which Performance Monitoring data is collected." ::= { f3L3TrafficIPv6InterfaceStatsEntry 2 } f3L3TrafficIPv6InterfaceStatsValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { f3L3TrafficIPv6InterfaceStatsEntry 3 } f3L3TrafficIPv6InterfaceStatsAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { f3L3TrafficIPv6InterfaceStatsEntry 4 } f3L3TrafficIPv6InterfaceStatsDhcpV6Tx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceStatsEntry 5 } f3L3TrafficIPv6InterfaceStatsDhcpV6Rx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceStatsEntry 6 } f3L3TrafficIPv6InterfaceStatsIcmpV6WONdpTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceStatsEntry 7 } f3L3TrafficIPv6InterfaceStatsIcmpV6WONdpRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceStatsEntry 8 } f3L3TrafficIPv6InterfaceStatsNdpNSTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceStatsEntry 9 } f3L3TrafficIPv6InterfaceStatsNdpNSRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceStatsEntry 10 } f3L3TrafficIPv6InterfaceStatsNdpNATx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceStatsEntry 11 } f3L3TrafficIPv6InterfaceStatsNdpNARx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceStatsEntry 12 } f3L3TrafficIPv6InterfaceStatsNdpRATx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceStatsEntry 13 } f3L3TrafficIPv6InterfaceStatsNdpRARx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceStatsEntry 14 } f3L3TrafficIPv6InterfaceStatsNdpRSTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceStatsEntry 15 } f3L3TrafficIPv6InterfaceStatsNdpRSRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceStatsEntry 16 } -- -- L3 traffic ipv6 interface History Statistics Table -- f3L3TrafficIPv6InterfaceHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIPv6InterfaceHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of L3 traffic ipv6 interface related statistics. These reflect the current data." ::= { f3L3Performance 23 } f3L3TrafficIPv6InterfaceHistoryEntry OBJECT-TYPE SYNTAX F3L3TrafficIPv6InterfaceHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficIPv6InterfaceHistoryTable. Entries exist in this table for each L3 traffic ipv6 interface." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPv6IfIndex, f3L3TrafficIPv6InterfaceStatsIndex, f3L3TrafficIPv6InterfaceHistoryIndex } ::= { f3L3TrafficIPv6InterfaceHistoryTable 1 } F3L3TrafficIPv6InterfaceHistoryEntry ::= SEQUENCE { f3L3TrafficIPv6InterfaceHistoryIndex Integer32, f3L3TrafficIPv6InterfaceHistoryTime DateAndTime, f3L3TrafficIPv6InterfaceHistoryValid TruthValue, f3L3TrafficIPv6InterfaceHistoryAction CmPmBinAction, f3L3TrafficIPv6InterfaceHistoryDhcpV6Tx PerfCounter64, f3L3TrafficIPv6InterfaceHistoryDhcpV6Rx PerfCounter64, f3L3TrafficIPv6InterfaceHistoryIcmpV6WONdpTx PerfCounter64, f3L3TrafficIPv6InterfaceHistoryIcmpV6WONdpRx PerfCounter64, f3L3TrafficIPv6InterfaceHistoryNdpNSTx PerfCounter64, f3L3TrafficIPv6InterfaceHistoryNdpNSRx PerfCounter64, f3L3TrafficIPv6InterfaceHistoryNdpNATx PerfCounter64, f3L3TrafficIPv6InterfaceHistoryNdpNARx PerfCounter64, f3L3TrafficIPv6InterfaceHistoryNdpRATx PerfCounter64, f3L3TrafficIPv6InterfaceHistoryNdpRARx PerfCounter64, f3L3TrafficIPv6InterfaceHistoryNdpRSTx PerfCounter64, f3L3TrafficIPv6InterfaceHistoryNdpRSRx PerfCounter64 } f3L3TrafficIPv6InterfaceHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this L3 Traffic IPv6 interface statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min" ::= { f3L3TrafficIPv6InterfaceHistoryEntry 1 } f3L3TrafficIPv6InterfaceHistoryTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time of history bin creation." ::= { f3L3TrafficIPv6InterfaceHistoryEntry 2 } f3L3TrafficIPv6InterfaceHistoryValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { f3L3TrafficIPv6InterfaceHistoryEntry 3 } f3L3TrafficIPv6InterfaceHistoryAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { f3L3TrafficIPv6InterfaceHistoryEntry 4 } f3L3TrafficIPv6InterfaceHistoryDhcpV6Tx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceHistoryEntry 5 } f3L3TrafficIPv6InterfaceHistoryDhcpV6Rx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceHistoryEntry 6 } f3L3TrafficIPv6InterfaceHistoryIcmpV6WONdpTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceHistoryEntry 7 } f3L3TrafficIPv6InterfaceHistoryIcmpV6WONdpRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceHistoryEntry 8 } f3L3TrafficIPv6InterfaceHistoryNdpNSTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceHistoryEntry 9 } f3L3TrafficIPv6InterfaceHistoryNdpNSRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceHistoryEntry 10 } f3L3TrafficIPv6InterfaceHistoryNdpNATx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceHistoryEntry 11 } f3L3TrafficIPv6InterfaceHistoryNdpNARx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceHistoryEntry 12 } f3L3TrafficIPv6InterfaceHistoryNdpRATx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceHistoryEntry 13 } f3L3TrafficIPv6InterfaceHistoryNdpRARx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceHistoryEntry 14 } f3L3TrafficIPv6InterfaceHistoryNdpRSTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceHistoryEntry 15 } f3L3TrafficIPv6InterfaceHistoryNdpRSRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { f3L3TrafficIPv6InterfaceHistoryEntry 16 } -- -- L3 traffic ipv6 interface Threshold Table -- f3L3TrafficIPv6InterfaceThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF F3L3TrafficIPv6InterfaceThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of entries that allow manageability of L3 traffic ipv6 interface Thresholds." ::= { f3L3Performance 24 } f3L3TrafficIPv6InterfaceThresholdEntry OBJECT-TYPE SYNTAX F3L3TrafficIPv6InterfaceThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the f3L3TrafficIPv6InterfaceThresholdTable." INDEX { neIndex, shelfIndex, slotIndex, f3L3FlowPointPortIndex, f3L3FlowPointIndex, f3L3TrafficIPv6IfIndex, f3L3TrafficIPv6InterfaceStatsIndex, f3L3TrafficIPv6InterfaceThresholdIndex } ::= { f3L3TrafficIPv6InterfaceThresholdTable 1 } F3L3TrafficIPv6InterfaceThresholdEntry ::= SEQUENCE { f3L3TrafficIPv6InterfaceThresholdIndex Integer32, f3L3TrafficIPv6InterfaceThresholdInterval CmPmIntervalType, f3L3TrafficIPv6InterfaceThresholdVariable VariablePointer, f3L3TrafficIPv6InterfaceThresholdValueLo Unsigned32, f3L3TrafficIPv6InterfaceThresholdValueHi Unsigned32, f3L3TrafficIPv6InterfaceThresholdMonValue Counter64 } f3L3TrafficIPv6InterfaceThresholdIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies an entry in the f3L3TrafficIPv6InterfaceThresholdTable." ::= { f3L3TrafficIPv6InterfaceThresholdEntry 1 } f3L3TrafficIPv6InterfaceThresholdInterval OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "The interval over which monitored value is sampled and compared with the specified threshold." ::= { f3L3TrafficIPv6InterfaceThresholdEntry 2 } f3L3TrafficIPv6InterfaceThresholdVariable OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "The object identifier of the particular variable to be sampled." ::= { f3L3TrafficIPv6InterfaceThresholdEntry 3 } f3L3TrafficIPv6InterfaceThresholdValueLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Lower 32 bits of the threshold value." ::= { f3L3TrafficIPv6InterfaceThresholdEntry 4 } f3L3TrafficIPv6InterfaceThresholdValueHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Higher 32 bits of the threshold value." ::= { f3L3TrafficIPv6InterfaceThresholdEntry 5 } f3L3TrafficIPv6InterfaceThresholdMonValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Monitored value corresponding to f3L3TrafficIPv6InterfaceThresholdVariable." ::= { f3L3TrafficIPv6InterfaceThresholdEntry 6 } -- -- L3 flow point Current Statistics Table -- cmL3FlowPointStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CML3FlowPointStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of L3 Flow Point related statistics. These reflect the current data." ::= { f3L3Performance 25 } cmL3FlowPointStatsEntry OBJECT-TYPE SYNTAX CML3FlowPointStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmL3FlowPointStatsTable. Entries exist in this table for each L3 flow point." INDEX { neIndex, shelfIndex, slotIndex, cmL3FlowPointPortIndex, cmL3FlowPointIndex, cmL3FlowPointStatsIndex } ::= { cmL3FlowPointStatsTable 1 } CML3FlowPointStatsEntry ::= SEQUENCE { cmL3FlowPointStatsIndex Integer32, cmL3FlowPointStatsIntervalType CmPmIntervalType, cmL3FlowPointStatsValid TruthValue, cmL3FlowPointStatsAction CmPmBinAction, cmL3FlowPointStatsFMG PerfCounter64, cmL3FlowPointStatsFMY PerfCounter64, cmL3FlowPointStatsFMRD PerfCounter64, cmL3FlowPointStatsFTD PerfCounter64, cmL3FlowPointStatsFragmentedDropAcl PerfCounter64, cmL3FlowPointStatsAclRuleDrop PerfCounter64, cmL3FlowPointStatsTtlEqual1Drop PerfCounter64, cmL3FlowPointStatsFrameTx PerfCounter64, cmL3FlowPointStatsFrameRx PerfCounter64, cmL3FlowPointStatsNoRouteDrop PerfCounter64, cmL3FlowPointStatsAclDropNoMatch PerfCounter64 } cmL3FlowPointStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min" ::= { cmL3FlowPointStatsEntry 1 } cmL3FlowPointStatsIntervalType OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "Interval over which Performance Monitoring data is collected." ::= { cmL3FlowPointStatsEntry 2 } cmL3FlowPointStatsValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { cmL3FlowPointStatsEntry 3 } cmL3FlowPointStatsAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { cmL3FlowPointStatsEntry 4 } cmL3FlowPointStatsFMG OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Frames Marked Green." ::= { cmL3FlowPointStatsEntry 5 } cmL3FlowPointStatsFMY OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Frames Marked Yellow." ::= { cmL3FlowPointStatsEntry 6 } cmL3FlowPointStatsFMRD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Frames Marked Red and Discarded." ::= { cmL3FlowPointStatsEntry 7 } cmL3FlowPointStatsFTD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Frames Tail Dropped." ::= { cmL3FlowPointStatsEntry 8 } cmL3FlowPointStatsFragmentedDropAcl OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of dropped fragmented packets." ::= { cmL3FlowPointStatsEntry 9 } cmL3FlowPointStatsAclRuleDrop OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of dropped packets due to ACL rule." ::= { cmL3FlowPointStatsEntry 10 } cmL3FlowPointStatsTtlEqual1Drop OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION " the number of dropped packets due to ttl's value is 1." ::= { cmL3FlowPointStatsEntry 11 } cmL3FlowPointStatsFrameTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of total transmitted frames." ::= { cmL3FlowPointStatsEntry 12 } cmL3FlowPointStatsFrameRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of total received frames." ::= { cmL3FlowPointStatsEntry 13 } cmL3FlowPointStatsNoRouteDrop OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of frames drop due to no route." ::= { cmL3FlowPointStatsEntry 14 } cmL3FlowPointStatsAclDropNoMatch OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of dropped packets due to no match in ACL rule." ::= { cmL3FlowPointStatsEntry 15 } -- -- CM L3 flow point history Statistics Table -- cmL3FlowPointHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF CML3FlowPointHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of L3 Flow Point related statistics. These reflect the current data." ::= { f3L3Performance 26 } cmL3FlowPointHistoryEntry OBJECT-TYPE SYNTAX CML3FlowPointHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmL3FlowPointHistoryTable. Entries exist in this table for each L3 flow point." INDEX { neIndex, shelfIndex, slotIndex, cmL3FlowPointPortIndex, cmL3FlowPointIndex, cmL3FlowPointStatsIndex, cmL3FlowPointHistoryIndex } ::= { cmL3FlowPointHistoryTable 1 } CML3FlowPointHistoryEntry ::= SEQUENCE { cmL3FlowPointHistoryIndex Integer32, cmL3FlowPointHistoryTime DateAndTime, cmL3FlowPointHistoryValid TruthValue, cmL3FlowPointHistoryAction CmPmBinAction, cmL3FlowPointHistoryFMG PerfCounter64, cmL3FlowPointHistoryFMY PerfCounter64, cmL3FlowPointHistoryFMRD PerfCounter64, cmL3FlowPointHistoryFTD PerfCounter64, cmL3FlowPointHistoryFragmentedDropAcl PerfCounter64, cmL3FlowPointHistoryAclRuleDrop PerfCounter64, cmL3FlowPointHistoryTtlEqual1Drop PerfCounter64, cmL3FlowPointHistoryFrameTx PerfCounter64, cmL3FlowPointHistoryFrameRx PerfCounter64, cmL3FlowPointHistoryNoRouteDrop PerfCounter64, cmL3FlowPointHistoryAclDropNoMatch PerfCounter64 } cmL3FlowPointHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify the history bin." ::= { cmL3FlowPointHistoryEntry 1 } cmL3FlowPointHistoryTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time of history bin creation." ::= { cmL3FlowPointHistoryEntry 2 } cmL3FlowPointHistoryValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { cmL3FlowPointHistoryEntry 3 } cmL3FlowPointHistoryAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { cmL3FlowPointHistoryEntry 4 } cmL3FlowPointHistoryFMG OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Frames Marked Green." ::= { cmL3FlowPointHistoryEntry 5 } cmL3FlowPointHistoryFMY OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Frames Marked Yellow." ::= { cmL3FlowPointHistoryEntry 6 } cmL3FlowPointHistoryFMRD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Frames Marked Red and Discarded." ::= { cmL3FlowPointHistoryEntry 7 } cmL3FlowPointHistoryFTD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Frames Tail Dropped." ::= { cmL3FlowPointHistoryEntry 8 } cmL3FlowPointHistoryFragmentedDropAcl OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of dropped fragmented packets." ::= { cmL3FlowPointHistoryEntry 9 } cmL3FlowPointHistoryAclRuleDrop OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of dropped packets due to ACL rule." ::= { cmL3FlowPointHistoryEntry 10 } cmL3FlowPointHistoryTtlEqual1Drop OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION " the number of dropped packets due to ttl's value is 1." ::= { cmL3FlowPointHistoryEntry 11 } cmL3FlowPointHistoryFrameTx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of total transmitted frames." ::= { cmL3FlowPointHistoryEntry 12 } cmL3FlowPointHistoryFrameRx OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION " the number of total recieved frames." ::= { cmL3FlowPointHistoryEntry 13 } cmL3FlowPointHistoryNoRouteDrop OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION " the number of frames dropped due to no route." ::= { cmL3FlowPointHistoryEntry 14 } cmL3FlowPointHistoryAclDropNoMatch OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of dropped packets due to no match in ACL rule." ::= { cmL3FlowPointHistoryEntry 15 } -- -- CM L3 Flow Point Threshold Table -- cmL3FlowPointThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF CML3FlowPointThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of entries that allow manageability of L3 Flow Point Thresholds." ::= { f3L3Performance 27 } cmL3FlowPointThresholdEntry OBJECT-TYPE SYNTAX CML3FlowPointThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmL3FlowPointThresholdTable." INDEX { neIndex, shelfIndex, slotIndex, cmL3FlowPointPortIndex, cmL3FlowPointIndex, cmL3FlowPointStatsIndex, cmL3FlowPointThresholdIndex } ::= { cmL3FlowPointThresholdTable 1 } CML3FlowPointThresholdEntry ::= SEQUENCE { cmL3FlowPointThresholdIndex Integer32, cmL3FlowPointThresholdInterval CmPmIntervalType, cmL3FlowPointThresholdVariable VariablePointer, cmL3FlowPointThresholdValueLo Unsigned32, cmL3FlowPointThresholdValueHi Unsigned32, cmL3FlowPointThresholdMonValue Counter64 } cmL3FlowPointThresholdIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies an entry in the cmL3FlowPointThresholdTable." ::= { cmL3FlowPointThresholdEntry 1 } cmL3FlowPointThresholdInterval OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "The interval over which monitored value is sampled and compared with the specified threshold." ::= { cmL3FlowPointThresholdEntry 2 } cmL3FlowPointThresholdVariable OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "The object identifier of the particular variable to be sampled." ::= { cmL3FlowPointThresholdEntry 3 } cmL3FlowPointThresholdValueLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Lower 32 bits of the threshold value." ::= { cmL3FlowPointThresholdEntry 4 } cmL3FlowPointThresholdValueHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Higher 32 bits of the threshold value." ::= { cmL3FlowPointThresholdEntry 5 } cmL3FlowPointThresholdMonValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Monitored value corresponding to cmL3FlowPointThresholdVariable." ::= { cmL3FlowPointThresholdEntry 6 } -- -- Quality of Service(QOS) Policer Current Statistics Table -- cmL3QosPolicerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CML3QosPolicerStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of QOS Policer statistics. These reflect the current data." ::= { f3L3Performance 28 } cmL3QosPolicerStatsEntry OBJECT-TYPE SYNTAX CML3QosPolicerStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmL3QosPolicerStatsTable. Entries exist in this table for each l3 flow point policer." INDEX { neIndex, shelfIndex, slotIndex, cmL3FlowPointPortIndex, cmL3FlowPointIndex, cmL3QosPolicerIndex, cmL3QosPolicerStatsIndex } ::= { cmL3QosPolicerStatsTable 1 } CML3QosPolicerStatsEntry ::= SEQUENCE { cmL3QosPolicerStatsIndex Integer32, cmL3QosPolicerStatsIntervalType CmPmIntervalType, cmL3QosPolicerStatsValid TruthValue, cmL3QosPolicerStatsAction CmPmBinAction, cmL3QosPolicerStatsFMG PerfCounter64, cmL3QosPolicerStatsFMY PerfCounter64, cmL3QosPolicerStatsFMYD PerfCounter64, cmL3QosPolicerStatsFMRD PerfCounter64, cmL3QosPolicerStatsBytesIn PerfCounter64, cmL3QosPolicerStatsBytesOut PerfCounter64, cmL3QosPolicerStatsABR PerfCounter64 } cmL3QosPolicerStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An integer index value used to uniquely identify this QOS Policer statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min" ::= { cmL3QosPolicerStatsEntry 1 } cmL3QosPolicerStatsIntervalType OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "Interval over which Performance Monitoring data is collected." ::= { cmL3QosPolicerStatsEntry 2 } cmL3QosPolicerStatsValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { cmL3QosPolicerStatsEntry 3 } cmL3QosPolicerStatsAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { cmL3QosPolicerStatsEntry 4 } cmL3QosPolicerStatsFMG OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Marked Green." ::= { cmL3QosPolicerStatsEntry 5 } cmL3QosPolicerStatsFMY OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Marked Yellow." ::= { cmL3QosPolicerStatsEntry 6 } cmL3QosPolicerStatsFMYD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Frames Marked Yellow and Dropped." ::= { cmL3QosPolicerStatsEntry 7 } cmL3QosPolicerStatsFMRD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Marked Red and Discarded." ::= { cmL3QosPolicerStatsEntry 8 } cmL3QosPolicerStatsBytesIn OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes received by the Policer." ::= { cmL3QosPolicerStatsEntry 9 } cmL3QosPolicerStatsBytesOut OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes transmitted by the Policer." ::= { cmL3QosPolicerStatsEntry 10 } cmL3QosPolicerStatsABR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average Bit Rate on the Policer." ::= { cmL3QosPolicerStatsEntry 11 } -- -- Quality of Service(QOS) Policer History Statistics Table -- cmL3QosPolicerHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF CML3QosPolicerHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of QOS Policer statistics. These reflect the current data." ::= { f3L3Performance 29 } cmL3QosPolicerHistoryEntry OBJECT-TYPE SYNTAX CML3QosPolicerHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmL3QosPolicerHistoryTable. Entries exist in this table for each flow point policer." INDEX { neIndex, shelfIndex, slotIndex, cmL3FlowPointPortIndex, cmL3FlowPointIndex, cmL3QosPolicerIndex, cmL3QosPolicerStatsIndex, cmL3QosPolicerHistoryIndex } ::= { cmL3QosPolicerHistoryTable 1 } CML3QosPolicerHistoryEntry ::= SEQUENCE { cmL3QosPolicerHistoryIndex Integer32, cmL3QosPolicerHistoryTime DateAndTime, cmL3QosPolicerHistoryValid TruthValue, cmL3QosPolicerHistoryAction CmPmBinAction, cmL3QosPolicerHistoryFMG PerfCounter64, cmL3QosPolicerHistoryFMY PerfCounter64, cmL3QosPolicerHistoryFMYD PerfCounter64, cmL3QosPolicerHistoryFMRD PerfCounter64, cmL3QosPolicerHistoryBytesIn PerfCounter64, cmL3QosPolicerHistoryBytesOut PerfCounter64, cmL3QosPolicerHistoryABR PerfCounter64 } cmL3QosPolicerHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this QOS Policer history entry." ::= { cmL3QosPolicerHistoryEntry 1 } cmL3QosPolicerHistoryTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time of history bin creation." ::= { cmL3QosPolicerHistoryEntry 2 } cmL3QosPolicerHistoryValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { cmL3QosPolicerHistoryEntry 3 } cmL3QosPolicerHistoryAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { cmL3QosPolicerHistoryEntry 4 } cmL3QosPolicerHistoryFMG OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Marked Green." ::= { cmL3QosPolicerHistoryEntry 5 } cmL3QosPolicerHistoryFMY OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Marked Yellow." ::= { cmL3QosPolicerHistoryEntry 6 } cmL3QosPolicerHistoryFMYD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Frames Marked Yellow and Dropped." ::= { cmL3QosPolicerHistoryEntry 7 } cmL3QosPolicerHistoryFMRD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Marked Red and Discarded." ::= { cmL3QosPolicerHistoryEntry 8 } cmL3QosPolicerHistoryBytesIn OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes received by the Policer." ::= { cmL3QosPolicerHistoryEntry 9 } cmL3QosPolicerHistoryBytesOut OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes transmitted by the Policer." ::= { cmL3QosPolicerHistoryEntry 10 } cmL3QosPolicerHistoryABR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average Bit Rate on the Policer." ::= { cmL3QosPolicerHistoryEntry 11 } -- -- QOS Policer Threshold Table -- cmL3QosPolicerThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF CML3QosPolicerThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of entries that allow manageability of QOS Policer Thresholds." ::= { f3L3Performance 30 } cmL3QosPolicerThresholdEntry OBJECT-TYPE SYNTAX CML3QosPolicerThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmL3QosPolicerThresholdTable." INDEX { neIndex, shelfIndex, slotIndex, cmL3FlowPointPortIndex, cmL3FlowPointIndex, cmL3QosPolicerIndex, cmL3QosPolicerStatsIndex, cmL3QosPolicerThresholdIndex } ::= { cmL3QosPolicerThresholdTable 1 } CML3QosPolicerThresholdEntry ::= SEQUENCE { cmL3QosPolicerThresholdIndex Integer32, cmL3QosPolicerThresholdInterval CmPmIntervalType, cmL3QosPolicerThresholdVariable VariablePointer, cmL3QosPolicerThresholdValueLo Unsigned32, cmL3QosPolicerThresholdValueHi Unsigned32, cmL3QosPolicerThresholdMonValue Counter64 } cmL3QosPolicerThresholdIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies an entry in the cmL3QosPolicerThresholdTable." ::= { cmL3QosPolicerThresholdEntry 1 } cmL3QosPolicerThresholdInterval OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "The interval over which monitored value is sampled and compared with the specified threshold." ::= { cmL3QosPolicerThresholdEntry 2 } cmL3QosPolicerThresholdVariable OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "The object identifier of the particular variable to be sampled." ::= { cmL3QosPolicerThresholdEntry 3 } cmL3QosPolicerThresholdValueLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Lower 32 bits of the threshold value." ::= { cmL3QosPolicerThresholdEntry 4 } cmL3QosPolicerThresholdValueHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Higher 32 bits of the threshold value." ::= { cmL3QosPolicerThresholdEntry 5 } cmL3QosPolicerThresholdMonValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Monitored value corresponding to cmL3QosPolicerThresholdVariable." ::= { cmL3QosPolicerThresholdEntry 6 } -- -- L3 flow point Level Quality of Service(QOS) Shaper Current Statistics Table -- cmL3QosShaperStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CML3QosShaperStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of L3 flow point Level QOS Shaper statistics. These reflect the current data." ::= { f3L3Performance 31 } cmL3QosShaperStatsEntry OBJECT-TYPE SYNTAX CML3QosShaperStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmL3QosShaperStatsTable. Entries exist in this table for each QOS Shaper per L3 flow point." INDEX { neIndex, shelfIndex, slotIndex, cmL3FlowPointPortIndex, cmL3FlowPointIndex, cmL3QosShaperIndex, cmL3QosShaperStatsIndex } ::= { cmL3QosShaperStatsTable 1 } CML3QosShaperStatsEntry ::= SEQUENCE { cmL3QosShaperStatsIndex Integer32, cmL3QosShaperStatsIntervalType CmPmIntervalType, cmL3QosShaperStatsValid TruthValue, cmL3QosShaperStatsAction CmPmBinAction, cmL3QosShaperStatsBT PerfCounter64, cmL3QosShaperStatsBTD PerfCounter64, cmL3QosShaperStatsFD PerfCounter64, cmL3QosShaperStatsFTD PerfCounter64, cmL3QosShaperStatsBR PerfCounter64, cmL3QosShaperStatsFR PerfCounter64, cmL3QosShaperStatsABRRL PerfCounter64, cmL3QosShaperStatsABRRLR PerfCounter64, cmL3QosShaperStatsBREDD PerfCounter64, cmL3QosShaperStatsFREDD PerfCounter64 } cmL3QosShaperStatsIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this QOS Shaper statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min" ::= { cmL3QosShaperStatsEntry 1 } cmL3QosShaperStatsIntervalType OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "Interval over which Performance Monitoring data is collected." ::= { cmL3QosShaperStatsEntry 2 } cmL3QosShaperStatsValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { cmL3QosShaperStatsEntry 3 } cmL3QosShaperStatsAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { cmL3QosShaperStatsEntry 4 } cmL3QosShaperStatsBT OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Transmitted." ::= { cmL3QosShaperStatsEntry 5 } cmL3QosShaperStatsBTD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Tail Dropped." ::= { cmL3QosShaperStatsEntry 6 } cmL3QosShaperStatsFD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Dequeued." ::= { cmL3QosShaperStatsEntry 7 } cmL3QosShaperStatsFTD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Tail Dropped." ::= { cmL3QosShaperStatsEntry 8 } cmL3QosShaperStatsBR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Replicated." ::= { cmL3QosShaperStatsEntry 9 } cmL3QosShaperStatsFR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Replicated." ::= { cmL3QosShaperStatsEntry 10 } cmL3QosShaperStatsABRRL OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average Bit Rate - Rate Limited." ::= { cmL3QosShaperStatsEntry 11 } cmL3QosShaperStatsABRRLR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average Bit Rate - Rate Limited, Replicated." ::= { cmL3QosShaperStatsEntry 12 } cmL3QosShaperStatsBREDD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Random Early Discard, Dropped." ::= { cmL3QosShaperStatsEntry 13 } cmL3QosShaperStatsFREDD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Random Early Discard, Dropped." ::= { cmL3QosShaperStatsEntry 14 } -- -- Quality of Service(QOS) Shaper History Statistics Table -- cmL3QosShaperHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF CML3QosShaperHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A collection of l3 flow point Level QOS Shaper statistics. These reflect the history data." ::= { f3L3Performance 32 } cmL3QosShaperHistoryEntry OBJECT-TYPE SYNTAX CML3QosShaperHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmL3QosShaperHistoryTable. Entries exist in this table for each Shaper per l3 flow point." INDEX { neIndex, shelfIndex, slotIndex, cmL3FlowPointPortIndex, cmL3FlowPointIndex, cmL3QosShaperIndex, cmL3QosShaperStatsIndex, cmL3QosShaperHistoryIndex } ::= { cmL3QosShaperHistoryTable 1 } CML3QosShaperHistoryEntry ::= SEQUENCE { cmL3QosShaperHistoryIndex Integer32, cmL3QosShaperHistoryTime DateAndTime, cmL3QosShaperHistoryValid TruthValue, cmL3QosShaperHistoryAction CmPmBinAction, cmL3QosShaperHistoryBT PerfCounter64, cmL3QosShaperHistoryBTD PerfCounter64, cmL3QosShaperHistoryFD PerfCounter64, cmL3QosShaperHistoryFTD PerfCounter64, cmL3QosShaperHistoryBR PerfCounter64, cmL3QosShaperHistoryFR PerfCounter64, cmL3QosShaperHistoryABRRL PerfCounter64, cmL3QosShaperHistoryABRRLR PerfCounter64, cmL3QosShaperHistoryBREDD PerfCounter64, cmL3QosShaperHistoryFREDD PerfCounter64 } cmL3QosShaperHistoryIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An arbitrary integer index value used to uniquely identify this QOS Shaper statistics entry." ::= { cmL3QosShaperHistoryEntry 1 } cmL3QosShaperHistoryTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the time of history bin creation." ::= { cmL3QosShaperHistoryEntry 2 } cmL3QosShaperHistoryValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the validity of the bin." ::= { cmL3QosShaperHistoryEntry 3 } cmL3QosShaperHistoryAction OBJECT-TYPE SYNTAX CmPmBinAction MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the Manager to clear the bin." ::= { cmL3QosShaperHistoryEntry 4 } cmL3QosShaperHistoryBT OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Transmitted." ::= { cmL3QosShaperHistoryEntry 5 } cmL3QosShaperHistoryBTD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Tail Dropped." ::= { cmL3QosShaperHistoryEntry 6 } cmL3QosShaperHistoryFD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Dequeued." ::= { cmL3QosShaperHistoryEntry 7 } cmL3QosShaperHistoryFTD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Tail Dropped." ::= { cmL3QosShaperHistoryEntry 8 } cmL3QosShaperHistoryBR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Replicated." ::= { cmL3QosShaperHistoryEntry 9 } cmL3QosShaperHistoryFR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Replicated." ::= { cmL3QosShaperHistoryEntry 10 } cmL3QosShaperHistoryABRRL OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average Bit Rate - Rate Limited." ::= { cmL3QosShaperHistoryEntry 11 } cmL3QosShaperHistoryABRRLR OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Average Bit Rate - Rate Limited, Replicated." ::= { cmL3QosShaperHistoryEntry 12 } cmL3QosShaperHistoryBREDD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Random Early Discard, Dropped." ::= { cmL3QosShaperHistoryEntry 13 } cmL3QosShaperHistoryFREDD OBJECT-TYPE SYNTAX PerfCounter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Random Early Discard, Dropped." ::= { cmL3QosShaperHistoryEntry 14 } -- -- L3 flow point QOS Shaper Threshold Table -- cmL3QosShaperThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF CML3QosShaperThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of entries that allow manageability of QOS Shaper Thresholds." ::= { f3L3Performance 33 } cmL3QosShaperThresholdEntry OBJECT-TYPE SYNTAX CML3QosShaperThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cmL3QosShaperThresholdTable." INDEX { neIndex, shelfIndex, slotIndex, cmL3FlowPointPortIndex, cmL3FlowPointIndex, cmL3QosShaperIndex, cmL3QosShaperStatsIndex, cmL3QosShaperThresholdIndex } ::= { cmL3QosShaperThresholdTable 1 } CML3QosShaperThresholdEntry ::= SEQUENCE { cmL3QosShaperThresholdIndex Integer32, cmL3QosShaperThresholdInterval CmPmIntervalType, cmL3QosShaperThresholdVariable VariablePointer, cmL3QosShaperThresholdValueLo Unsigned32, cmL3QosShaperThresholdValueHi Unsigned32, cmL3QosShaperThresholdMonValue Counter64 } cmL3QosShaperThresholdIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies an entry in the cmL3QosShaperThresholdTable." ::= { cmL3QosShaperThresholdEntry 1 } cmL3QosShaperThresholdInterval OBJECT-TYPE SYNTAX CmPmIntervalType MAX-ACCESS read-only STATUS current DESCRIPTION "The interval over which monitored value is sampled and compared with the specified threshold." ::= { cmL3QosShaperThresholdEntry 2 } cmL3QosShaperThresholdVariable OBJECT-TYPE SYNTAX VariablePointer MAX-ACCESS read-only STATUS current DESCRIPTION "The object identifier of the particular variable to be sampled." ::= { cmL3QosShaperThresholdEntry 3 } cmL3QosShaperThresholdValueLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Lower 32 bits of the threshold value." ::= { cmL3QosShaperThresholdEntry 4 } cmL3QosShaperThresholdValueHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Higher 32 bits of the threshold value." ::= { cmL3QosShaperThresholdEntry 5 } cmL3QosShaperThresholdMonValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Monitored value corresponding to cmL3QosShaperThresholdVariable." ::= { cmL3QosShaperThresholdEntry 6 } --- ---Notifications --- f3L3FlowPointThresholdCrossingAlert NOTIFICATION-TYPE OBJECTS { f3L3FlowPointThresholdIndex, f3L3FlowPointThresholdInterval, f3L3FlowPointThresholdVariable, f3L3FlowPointThresholdValueLo, f3L3FlowPointThresholdValueHi, f3L3FlowPointThresholdMonValue } STATUS current DESCRIPTION "This trap is sent each time a threshold on a PM condition on an L3 flow point is crossed." ::= { f3L3Notifications 1 } f3L3QosPolicerThresholdCrossingAlert NOTIFICATION-TYPE OBJECTS { f3L3QosPolicerThresholdIndex, f3L3QosPolicerThresholdInterval, f3L3QosPolicerThresholdVariable, f3L3QosPolicerThresholdValueLo, f3L3QosPolicerThresholdValueHi, f3L3QosPolicerThresholdMonValue } STATUS current DESCRIPTION "This trap is sent each time a threshold on a PM condition on an L3 Qos Policer is crossed." ::= { f3L3Notifications 2 } f3L3QosShaperThresholdCrossingAlert NOTIFICATION-TYPE OBJECTS { f3L3QosShaperThresholdIndex, f3L3QosShaperThresholdInterval, f3L3QosShaperThresholdVariable, f3L3QosShaperThresholdValueLo, f3L3QosShaperThresholdValueHi, f3L3QosShaperThresholdMonValue } STATUS current DESCRIPTION "This trap is sent each time a threshold on a PM condition on an L3 Qos Shaper is crossed." ::= { f3L3Notifications 3 } f3L3TrafficIpInterfaceThresholdCrossingAlert NOTIFICATION-TYPE OBJECTS { f3L3TrafficIpInterfaceThresholdIndex, f3L3TrafficIpInterfaceThresholdInterval, f3L3TrafficIpInterfaceThresholdVariable, f3L3TrafficIpInterfaceThresholdValueLo, f3L3TrafficIpInterfaceThresholdValueHi, f3L3TrafficIpInterfaceThresholdMonValue } STATUS current DESCRIPTION "This trap is sent each time a threshold on a PM condition on an L3 traffic ip interface is crossed." ::= { f3L3Notifications 4 } f3L3AclRuleThresholdCrossingAlert NOTIFICATION-TYPE OBJECTS { f3L3AclRuleThresholdIndex, f3L3AclRuleThresholdInterval, f3L3AclRuleThresholdVariable, f3L3AclRuleThresholdValueLo, f3L3AclRuleThresholdValueHi, f3L3AclRuleThresholdMonValue } STATUS current DESCRIPTION "This trap is sent each time a threshold on a PM condition on an L3 acl rule is crossed." ::= { f3L3Notifications 5 } f3L2A2NAclRuleThresholdCrossingAlert NOTIFICATION-TYPE OBJECTS { f3L2A2NAclRuleThresholdIndex, f3L2A2NAclRuleThresholdInterval, f3L2A2NAclRuleThresholdVariable, f3L2A2NAclRuleThresholdValueLo, f3L2A2NAclRuleThresholdValueHi, f3L2A2NAclRuleThresholdMonValue } STATUS current DESCRIPTION "This trap is sent each time a threshold on a PM condition on an L2 A2N acl rule is crossed." ::= { f3L3Notifications 6 } f3L2N2AAclRuleThresholdCrossingAlert NOTIFICATION-TYPE OBJECTS { f3L2N2AAclRuleThresholdIndex, f3L2N2AAclRuleThresholdInterval, f3L2N2AAclRuleThresholdVariable, f3L2N2AAclRuleThresholdValueLo, f3L2N2AAclRuleThresholdValueHi, f3L2N2AAclRuleThresholdMonValue } STATUS current DESCRIPTION "This trap is sent each time a threshold on a PM condition on an L2 N2A acl rule is crossed." ::= { f3L3Notifications 7 } f3L3TrafficIPv6InterfaceThresholdCrossingAlert NOTIFICATION-TYPE OBJECTS { f3L3TrafficIPv6InterfaceThresholdIndex, f3L3TrafficIPv6InterfaceThresholdInterval, f3L3TrafficIPv6InterfaceThresholdVariable, f3L3TrafficIPv6InterfaceThresholdValueLo, f3L3TrafficIPv6InterfaceThresholdValueHi, f3L3TrafficIPv6InterfaceThresholdMonValue } STATUS current DESCRIPTION "This trap is sent each time a threshold on a PM condition on an L3 traffic ipv6 interface is crossed." ::= { f3L3Notifications 8 } cmL3FlowPointThresholdCrossingAlert NOTIFICATION-TYPE OBJECTS { cmL3FlowPointThresholdIndex, cmL3FlowPointThresholdInterval, cmL3FlowPointThresholdVariable, cmL3FlowPointThresholdValueLo, cmL3FlowPointThresholdValueHi, cmL3FlowPointThresholdMonValue } STATUS current DESCRIPTION "This trap is sent each time a threshold on a PM condition on an L3 flow point is crossed." ::= { cmL3Notifications 9 } cmL3QosPolicerThresholdCrossingAlert NOTIFICATION-TYPE OBJECTS { cmL3QosPolicerThresholdIndex, cmL3QosPolicerThresholdInterval, cmL3QosPolicerThresholdVariable, cmL3QosPolicerThresholdValueLo, cmL3QosPolicerThresholdValueHi, cmL3QosPolicerThresholdMonValue } STATUS current DESCRIPTION "This trap is sent each time a threshold on a PM condition on an L3 Qos Policer is crossed." ::= { cmL3Notifications 10 } cmL3QosShaperThresholdCrossingAlert NOTIFICATION-TYPE OBJECTS { cmL3QosShaperThresholdIndex, cmL3QosShaperThresholdInterval, cmL3QosShaperThresholdVariable, cmL3QosShaperThresholdValueLo, cmL3QosShaperThresholdValueHi, cmL3QosShaperThresholdMonValue } STATUS current DESCRIPTION "This trap is sent each time a threshold on a PM condition on an L3 Qos Shaper is crossed." ::= { cmL3Notifications 11 } -- -- Conformance -- f3L3Compliances OBJECT IDENTIFIER ::= {f3L3Conformance 1} f3L3Groups OBJECT IDENTIFIER ::= {f3L3Conformance 2} f3L3Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Describes the requirements for conformance to the L3." MODULE -- this module MANDATORY-GROUPS { f3L3ObjectsGroup, f3L3PerfGroup, f3L3TrafficOspfGroup, f3L3TrafficIPv6Group, f3L3TrafficBgpGroup } ::= { f3L3Compliances 1 } f3L3ObjectsGroup OBJECT-GROUP OBJECTS { f3DhcpRelayAgentIndex,f3DhcpRelayAgentAlias,f3DhcpRelayAgentAdminState, f3DhcpRelayAgentSecondaryState,f3DhcpRelayAgentOperationalState, f3DhcpRelayAgentIpVersion,f3DhcpRelayAgentServerIpAddress, f3DhcpRelayAgentOp82SubOp9ControlEnabled,f3DhcpRelayAgentOp82SubOp9Value, f3DhcpRelayAgentStorageType, f3DhcpRelayAgentRowStatus, f3VrfIndex,f3VrfAlias, f3VrfAdminState,f3VrfSecondaryState,f3VrfTraceRouteIpv4Destination, f3VrfOperationalState,f3VrfAccIsolationControlEnabled,f3VrfPingResult,f3VrfPingIpv4Destination, f3VrfTraceRouteResult,f3VrfAction,f3VrfStorageType,f3VrfTransportType,f3VrfRowStatus,f3VrfDhcpRoutesControl, f3VrfActionX,f3VrfActionIfName,f3VrfIpVersion,f3VrfPingIpv6Destination,f3VrfTraceRouteIpv6Destination, f3L3FlowPointPortTypeIndex,f3L3FlowPointPortIndex, f3L3FlowPointIndex,f3L3FlowPointAlias,f3L3FlowPointAdminState,f3L3FlowPointSecondaryState, f3L3FlowPointOperationalState,f3L3FlowPointMultiCOSEnabled,f3L3FlowPointCOS,f3L3FlowPointUntaggedMemberShipEnabled, f3L3FlowPointOuterTagMemberShipEnabled,f3L3FlowPointOuterTagMemberShipVlanId, f3L3FlowPointInnerTagMemberShipEnabled,f3L3FlowPointInnerTagMemberShipVlanId, f3L3FlowPointFragmentedPktsFwdEnabled, f3L3FlowPointHCosMgmtEnabled,f3L3FlowPointHCosGuaranteedBwHi,f3L3FlowPointHCosGuaranteedBwLo, f3L3FlowPointHCosMaximumBwHi,f3L3FlowPointHCosMaximumBwLo,f3L3FlowPointPolicingEnabled, f3L3FlowPointStorageType,f3L3FlowPointRowStatus, f3L3FlowPointDscpOverwriteControl, f3L3FlowPointPriMapProfile,f3L3FlowPointRefConnectGuardFlow, f3L3FlowPointSecureState,f3L3FlowPointSecureBlockingEnabled, f3L3FlowPointWfqSegmentationCOS, f3L3FlowPointWfqGroupCOS, f3L3FlowPointWfqGroupEirLo, f3L3FlowPointWfqGroupEirHi, f3L3FlowPointOuterVlanEthertype, f3L3FlowPointInnerVlanEthertype, f3L3FlowPointIpVersion, f3L3AclRuleParentIndex,f3L3AclRuleIndex,f3L3AclRuleAlias,f3L3AclRuleSrcIpv4AddressControl, f3L3AclRuleDynamicSrcIpControl,f3L3AclRuleSrcIpv4AddressLowLimit,f3L3AclRuleDstIpv4AddressControl, f3L3AclRuleDstIpv4AddressLowLimit,f3L3AclRuleIpv4PriorityControl,f3L3AclRuleIpv4PriorityLowLimit, f3L3AclRuleProtocolControl,f3L3AclRuleProtocolNumber,f3L3AclRuleSrcPortControl, f3L3AclRuleSrcPortLowLimit,f3L3AclRuleSrcPortHighLimit,f3L3AclRuleDstPortControl, f3L3AclRuleDstPortLowLimit,f3L3AclRuleDstPortHighLimit,f3L3AclRulePriority,f3L3AclRuleCOS, f3L3AclRuleOperation,f3L3AclRuleSummary,f3L3AclRuleCosOverrideControl, f3L3AclRuleSrcMacAddressControl,f3L3AclRuleDynamicSrcMacAddressControl, f3L3AclRuleSrcMacAddress,f3L3AclRuleSrcMacAddressMask,f3L3AclRuleDstMacAddressControl, f3L3AclRuleDstMacAddress,f3L3AclRuleDstMacAddressMask,f3L3AclRuleOuterVlanVIDControl, f3L3AclRuleOuterVlanVIDLowLimit,f3L3AclRuleOuterVlanVIDHighLimit, f3L3AclRuleInnerVlanVIDControl,f3L3AclRuleInnerVlanVIDLowLimit,f3L3AclRuleInnerVlanVIDHighLimit, f3L3AclRuleOuterVlanPcpControl,f3L3AclRuleOuterVlanPcpLowLimit,f3L3AclRuleOuterVlanPcpHighLimit, f3L3AclRuleInnerVlanPcpControl,f3L3AclRuleInnerVlanPcpLowLimit,f3L3AclRuleInnerVlanPcpHighLimit, f3L3AclRuleOuterVlanDeiControl,f3L3AclRuleOuterVlanDei,f3L3AclRuleEtherTypeControl, f3L3AclRuleEtherType,f3L3AclRuleTcpFlagsControl,f3L3AclRuleTcpFlags, f3L3AclRuleSrcIpv4AddressHighLimit,f3L3AclRuleDstIpv4AddressHighLimit,f3L3AclRuleIpv4PriorityHighLimit, f3L3AclRuleStorageType,f3L3AclRuleRowStatus,f3L3AclRuleAdminState, f3L3AclRuleActive,f3L3AclRuleSrcIpV6AddressControl,f3L3AclRuleSrcIpV6Address, f3L3AclRuleSrcIpV6AddressPrefixLen,f3L3AclRuleDstIpV6AddressControl,f3L3AclRuleDstIpV6Address, f3L3AclRuleDstIpV6AddressPrefixLen,f3L3AclRuleIpV6FlowLabelControl,f3L3AclRuleIpV6FlowLabel, f3L3AclRuleIpV6FlowLabel, f3L3AclRulePriorityControl, f3L3AclRulePriorityLowLimit, f3L3AclRulePriorityHighLimit, f3L2A2NAclRuleParentIndex,f3L2A2NAclRuleIndex,f3L2A2NAclRuleAlias,f3L2A2NAclRuleSrcIpv4AddressControl, f3L2A2NAclRuleDynamicSrcIpControl,f3L2A2NAclRuleSrcIpv4AddressLowLimit,f3L2A2NAclRuleDstIpv4AddressControl, f3L2A2NAclRuleDstIpv4AddressLowLimit,f3L2A2NAclRuleIpv4PriorityControl,f3L2A2NAclRuleIpv4PriorityLowLimit, f3L2A2NAclRuleProtocolControl,f3L2A2NAclRuleProtocolNumber,f3L2A2NAclRuleSrcPortControl,f3L2A2NAclRuleSrcPortLowLimit, f3L2A2NAclRuleSrcPortHighLimit,f3L2A2NAclRuleDstPortControl,f3L2A2NAclRuleDstPortLowLimit,f3L2A2NAclRuleDstPortHighLimit, f3L2A2NAclRulePriority,f3L2A2NAclRuleCOS,f3L2A2NAclRuleOperation,f3L2A2NAclRuleSummary,f3L2A2NAclRuleCosOverrideControl, f3L2A2NAclRuleSrcMacAddressControl,f3L2A2NAclRuleDynamicSrcMacAddressControl,f3L2A2NAclRuleSrcMacAddress, f3L2A2NAclRuleSrcMacAddressMask,f3L2A2NAclRuleDstMacAddressControl,f3L2A2NAclRuleDstMacAddress,f3L2A2NAclRuleDstMacAddressMask, f3L2A2NAclRuleOuterVlanVIDControl,f3L2A2NAclRuleOuterVlanVIDLowLimit,f3L2A2NAclRuleOuterVlanVIDHighLimit,f3L2A2NAclRuleInnerVlanVIDControl, f3L2A2NAclRuleInnerVlanVIDLowLimit,f3L2A2NAclRuleInnerVlanVIDHighLimit,f3L2A2NAclRuleOuterVlanPcpControl,f3L2A2NAclRuleOuterVlanPcpLowLimit, f3L2A2NAclRuleOuterVlanPcpHighLimit,f3L2A2NAclRuleInnerVlanPcpControl,f3L2A2NAclRuleInnerVlanPcpLowLimit,f3L2A2NAclRuleInnerVlanPcpHighLimit, f3L2A2NAclRuleOuterVlanDeiControl,f3L2A2NAclRuleOuterVlanDei,f3L2A2NAclRuleEtherTypeControl,f3L2A2NAclRuleEtherType, f3L2A2NAclRuleTcpFlagsControl,f3L2A2NAclRuleTcpFlags,f3L2A2NAclRuleSrcIpv4AddressHighLimit,f3L2A2NAclRuleDstIpv4AddressHighLimit, f3L2A2NAclRuleIpv4PriorityHighLimit,f3L2A2NAclRuleStorageType,f3L2A2NAclRuleRowStatus,f3L2A2NAclRuleAdminState, f3L2A2NAclRuleActive,f3L2A2NAclRuleSrcIpV6AddressControl,f3L2A2NAclRuleSrcIpV6Address,f3L2A2NAclRuleSrcIpV6AddressPrefixLen, f3L2A2NAclRuleDstIpV6AddressControl,f3L2A2NAclRuleDstIpV6Address,f3L2A2NAclRuleDstIpV6AddressPrefixLen, f3L2A2NAclRuleIpV6FlowLabelControl,f3L2A2NAclRuleIpV6FlowLabel, f3L2N2AAclRuleParentIndex,f3L2N2AAclRuleIndex,f3L2N2AAclRuleAlias,f3L2N2AAclRuleSrcIpv4AddressControl, f3L2N2AAclRuleDynamicSrcIpControl,f3L2N2AAclRuleSrcIpv4AddressLowLimit,f3L2N2AAclRuleDstIpv4AddressControl, f3L2N2AAclRuleDstIpv4AddressLowLimit,f3L2N2AAclRuleIpv4PriorityControl,f3L2N2AAclRuleIpv4PriorityLowLimit, f3L2N2AAclRuleProtocolControl,f3L2N2AAclRuleProtocolNumber,f3L2N2AAclRuleSrcPortControl,f3L2N2AAclRuleSrcPortLowLimit, f3L2N2AAclRuleSrcPortHighLimit,f3L2N2AAclRuleDstPortControl,f3L2N2AAclRuleDstPortLowLimit,f3L2N2AAclRuleDstPortHighLimit, f3L2N2AAclRulePriority,f3L2N2AAclRuleCOS,f3L2N2AAclRuleOperation,f3L2N2AAclRuleSummary,f3L2N2AAclRuleCosOverrideControl, f3L2N2AAclRuleSrcMacAddressControl,f3L2N2AAclRuleDynamicSrcMacAddressControl,f3L2N2AAclRuleSrcMacAddress, f3L2N2AAclRuleSrcMacAddressMask,f3L2N2AAclRuleDstMacAddressControl,f3L2N2AAclRuleDstMacAddress,f3L2N2AAclRuleDstMacAddressMask, f3L2N2AAclRuleOuterVlanVIDControl,f3L2N2AAclRuleOuterVlanVIDLowLimit,f3L2N2AAclRuleOuterVlanVIDHighLimit,f3L2N2AAclRuleInnerVlanVIDControl, f3L2N2AAclRuleInnerVlanVIDLowLimit,f3L2N2AAclRuleInnerVlanVIDHighLimit,f3L2N2AAclRuleOuterVlanPcpControl,f3L2N2AAclRuleOuterVlanPcpLowLimit, f3L2N2AAclRuleOuterVlanPcpHighLimit,f3L2N2AAclRuleInnerVlanPcpControl,f3L2N2AAclRuleInnerVlanPcpLowLimit,f3L2N2AAclRuleInnerVlanPcpHighLimit, f3L2N2AAclRuleOuterVlanDeiControl,f3L2N2AAclRuleOuterVlanDei,f3L2N2AAclRuleEtherTypeControl,f3L2N2AAclRuleEtherType, f3L2N2AAclRuleTcpFlagsControl,f3L2N2AAclRuleTcpFlags,f3L2N2AAclRuleSrcIpv4AddressHighLimit,f3L2N2AAclRuleDstIpv4AddressHighLimit, f3L2N2AAclRuleIpv4PriorityHighLimit,f3L2N2AAclRuleStorageType,f3L2N2AAclRuleRowStatus,f3L2N2AAclRuleAdminState, f3L2N2AAclRuleActive,f3L2N2AAclRuleSrcIpV6AddressControl,f3L2N2AAclRuleSrcIpV6Address,f3L2N2AAclRuleSrcIpV6AddressPrefixLen, f3L2N2AAclRuleDstIpV6AddressControl,f3L2N2AAclRuleDstIpV6Address,f3L2N2AAclRuleDstIpV6AddressPrefixLen, f3L3AclRuleIpV6FlowLabelControl,f3L3AclRuleIpV6FlowLabel, f3L3QosPolicerIndex,f3L3QosPolicerAdminState,f3L3QosPolicerOperationalState, f3L3QosPolicerSecondaryState,f3L3QosPolicerCIRLo,f3L3QosPolicerCIRHi,f3L3QosPolicerEIRLo, f3L3QosPolicerEIRHi,f3L3QosPolicerCBS,f3L3QosPolicerEBS,f3L3QosPolicerAlgorithm, f3L3QosPolicerColorMode,f3L3QosPolicerCouplingFlag, f3L3QosPolicerStorageType,f3L3QosPolicerRowStatus, f3L3QosPolicerCIRMaxHi, f3L3QosPolicerCIRMaxLo, f3L3QosPolicerEIRMaxHi, f3L3QosPolicerEIRMaxLo, f3L3QosPolicerEnvelopeObject, f3L3QosPolicerRank, f3L3QosPolicerPolicingEnabled, f3L3QosShaperIndex,f3L3QosShaperAdminState,f3L3QosShaperOperationalState, f3L3QosShaperSecondaryState,f3L3QosShaperCIRLo,f3L3QosShaperCIRHi,f3L3QosShaperEIRLo, f3L3QosShaperEIRHi,f3L3QosShaperBufferSize,f3L3QosShaperCOS, f3L3QosShaperWredGreenMinQueueThreshold,f3L3QosShaperWredGreenMaxQueueThreshold, f3L3QosShaperWredGreenDropProbability,f3L3QosShaperWredYellowMinQueueThreshold,f3L3QosShaperWredYellowMaxQueueThreshold, f3L3QosShaperWredYellowDropProbability,f3L3QosShaperStorageType,f3L3QosShaperRowStatus, f3L3QosShaperWfqWeight, f3L3TrafficIPIfIndex,f3L3TrafficIPIfName,f3L3TrafficIPIfAdminState,f3L3TrafficIPIfSecondaryState, f3L3TrafficIPIfOperationalState,f3L3TrafficIPIfProxyArpEnabled,f3L3TrafficIPIfIpAddressSourceType, f3L3TrafficIPIfMgmtUseEnable,f3L3TrafficIPIfIpAddress,f3L3TrafficIPIfMask, f3L3TrafficIPIfDhcpRelayInterfaceSide,f3L3TrafficIPIfDhcpRelayVendorClassiDOpt60, f3L3TrafficIPIfDhcpRelayVendorClassiDOpt60Control,f3L3TrafficIPIfDhcpRelayUserClassOpt77, f3L3TrafficIPIfDhcpRelayInfoOpt82Sub1,f3L3TrafficIPIfDhcpRelayUserClassOpt77Control, f3L3TrafficIPIfDhcpRelayInfoOpt82Sub1Enabled,f3L3TrafficIPIfDhcpRelayInfoOpt82Sub2, f3L3TrafficIPIfDhcpRelayInfoOpt82Sub2Enabled,f3L3TrafficIPIfDhcpEnabled,f3L3TrafficIPIfDhcpRole, f3L3TrafficIPIfDhcpClientIdEnabled,f3L3TrafficIPIfDhcpClientId,f3L3TrafficIPIfDhcpClassIdEnabled, f3L3TrafficIPIfDhcpHostNameEnabled,f3L3TrafficIPIfDhcpHostName, f3L3TrafficIPIfDhcpClientIdType,f3L3TrafficIPIfDhcpHostNameType, f3L3TrafficIPIfStorageType,f3L3TrafficIPIfRowStatus,f3L3TrafficIPIfAction, f3L3TrafficIPIfActionX, f3L3TrafficIPIfUnnumberedControl,f3L3TrafficIPIfBorrowedIntf, f3L3TrafficIPIfIpMode,f3L3TrafficIPIfType,f3L3TrafficIPIfIpv6LinkLocalAddr, f3L3TrafficIPIfIpv6LinkLocalAddrMode,f3L3TrafficIPIfIpv6StatelessAddrAutoconfigEnabled, f3L3TrafficIPIfDefaultGateway,f3L3TrafficIPIfIcmpErrorMsgRateLimit, f3L3TrafficIPIfDhcpv6Role,f3L3TrafficIPIfDhcpv6Enabled, f3L3TrafficIPIfDhcpRapidCommitControlEnabled,f3L3TrafficIPIfMaxRAInterval, f3L3TrafficIPIfMinRAInterval,f3L3TrafficIPIfRouterLifeTime,f3L3TrafficIPIfReachableTime, f3L3TrafficIPIfRaDhcpMoreConfigEnabled,f3L3TrafficIPIfRaManagedAddressConfigEnabled, f3L3TrafficIPIfRaRDNSSOptionEnabled,f3L3TrafficIPIfRaRDNSSLifeTime, f3L3TrafficIPIfRaDNSSList,f3L3TrafficIPIfRaDefaultRouterPreference, f3L3TrafficIPIfDupAddrDetectControl,f3L3TrafficIPIfDupAddrDetectTransmits, f3L3TrafficIPIfDupAddrDetectRetransTimer,f3L3TrafficIPIfMTU, f3VrfActionIfName, f3VrfIpVersion, f3VrfPingIpv6Destination, f3VrfTraceRouteIpv6Destination, f3VrfMaxFwdTableEntries, f3VrfFwdTableFull, f3VrfEcmpDistribution, f3VrfEcmpStaticRoutesMaximumPaths, f3DhcpRelayAgentTrafficIpIfMemberObject,f3DhcpRelayAgentTrafficIpIfMemberStorageType, f3DhcpRelayAgentTrafficIpIfMemberRowStatus, f3VrfTrafficIpIfMemberObject,f3VrfTrafficIpIfMemberStorageType,f3VrfTrafficIpIfMemberRowStatus, f3L3TrafficIpv4RouteDest, f3L3TrafficIpv4RouteMask,f3L3TrafficIpv4RouteNextHop,f3L3TrafficIpv4RouteMetric, f3L3TrafficIpv4RouteInterface,f3L3TrafficIpv4RouteAdvertise,f3L3TrafficIpv4RouteStatus, f3L3TrafficIpv4RouteStatusX, f3L3TrafficIpv4RouteSourceForwardingEnable,f3L3TrafficIpv4RouteFlags, f3L3TrafficIpv4RouteStorageType,f3L3TrafficIpv4RouteRowStatus,f3L3TrafficIpv4RouteType, f3L3TrafficIpv4RouteStatusX,f3L3TrafficIpv4RouteOrigin, f3L3TrafficArpIPAddress, f3L3TrafficArpMacAddress, f3L3TrafficArpInterface, f3L3TrafficArpEntryType, f3L3TrafficArpStorageType,f3L3TrafficArpRowStatus, cmL3FlowPointPortIndex, cmL3FlowPointIndex, cmL3FlowPointAlias, cmL3FlowPointAdminState, cmL3FlowPointSecondaryState, cmL3FlowPointOperationalState, cmL3FlowPointMultiCOSEnabled, cmL3FlowPointCOS, cmL3FlowPointUntaggedMemberShipEnabled, cmL3FlowPointOuterTagMemberShipEnabled, cmL3FlowPointOuterTagMemberShipVlanId, cmL3FlowPointInnerTagMemberShipEnabled, cmL3FlowPointInnerTagMemberShipVlanId, cmL3FlowPointFragmentedPktsFwdEnabled, cmL3FlowPointHCosMgmtEnabled, cmL3FlowPointHCosGuaranteedBwHi, cmL3FlowPointHCosGuaranteedBwLo, cmL3FlowPointHCosMaximumBwHi, cmL3FlowPointHCosMaximumBwLo, cmL3FlowPointDscpOverwriteControl, cmL3FlowPointPriMapProfile, cmL3FlowPointStorageType, cmL3FlowPointRowStatus, cmL3FlowPointAclNoMatchDisposition, cmL3FlowPointWfqSegmentationCOS, cmL3FlowPointWfqGroupCOS, cmL3FlowPointWfqGroupEirLo, cmL3FlowPointWfqGroupEirHi, cmL3FlowPointEgressShapingType, cmL3QosPolicerIndex, cmL3QosPolicerAdminState, cmL3QosPolicerOperationalState, cmL3QosPolicerSecondaryState, cmL3QosPolicerCIRLo, cmL3QosPolicerCIRHi, cmL3QosPolicerEIRLo, cmL3QosPolicerEIRHi, cmL3QosPolicerCBS, cmL3QosPolicerEBS, cmL3QosPolicerAlgorithm, cmL3QosPolicerColorMode, cmL3QosPolicerCouplingFlag, cmL3QosPolicerCIRMaxHi, cmL3QosPolicerCIRMaxLo, cmL3QosPolicerEIRMaxHi, cmL3QosPolicerEIRMaxLo, cmL3QosPolicerEnvelopeObject, cmL3QosPolicerRank, cmL3QosPolicerPolicingEnabled, cmL3QosPolicerStorageType, cmL3QosPolicerRowStatus, cmL3QosShaperIndex, cmL3QosShaperAdminState, cmL3QosShaperOperationalState, cmL3QosShaperSecondaryState, cmL3QosShaperCIRLo, cmL3QosShaperCIRHi, cmL3QosShaperEIRLo, cmL3QosShaperEIRHi, cmL3QosShaperBufferSize, cmL3QosShaperCOS, cmL3QosShaperStorageType, cmL3QosShaperRowStatus, cmL3QosShaperWfqWeight, f3L3TrafficIpv4StaticRouteDest, f3L3TrafficIpv4StaticRouteMask, f3L3TrafficIpv4StaticRouteNextHop, f3L3TrafficIpv4StaticRouteInterface, f3L3TrafficIpv4StaticRouteMetric, f3L3TrafficIpv4StaticRouteSourceForwardingEnable, f3L3TrafficIpv4StaticRouteStorageType, f3L3TrafficIpv4StaticRouteRowStatus, f3L3TrafficIpv4AllRouteDest, f3L3TrafficIpv4AllRouteMask, f3L3TrafficIpv4AllRouteNextHop, f3L3TrafficIpv4AllRouteInterface, f3L3TrafficIpv4AllRouteOrigin, f3L3TrafficIpv4AllRouteMetric, f3L3TrafficIpv4AllRouteSourceForwardingEnable, f3L3TrafficIpv4AllRouteAdminDistance, f3L3TrafficIpv4AllRouteStatus, f3L3TrafficIpv4AllRouteStorageType, f3L3TrafficIpv4AllRouteRowStatus, f3L3TrafficIpv6StaticRouteDest, f3L3TrafficIpv6StaticRoutePrefixLength, f3L3TrafficIpv6StaticRouteNextHop, f3L3TrafficIpv6StaticRouteInterface, f3L3TrafficIpv6StaticRouteMetric, f3L3TrafficIpv6StaticRouteStorageType, f3L3TrafficIpv6StaticRouteRowStatus, f3L3TrafficIpv6AllRouteDest, f3L3TrafficIpv6AllRoutePrefixLength, f3L3TrafficIpv6AllRouteNextHop, f3L3TrafficIpv6AllRouteInterface, f3L3TrafficIpv6AllRouteOrigin, f3L3TrafficIpv6AllRouteMetric, f3L3TrafficIpv6AllRouteAdminDistance, f3L3TrafficIpv6AllRouteStatus, f3L3TrafficIpv6AllRouteStorageType, f3L3TrafficIpv6AllRouteRowStatus, f3IpPrefixListIndex, f3IpPrefixListName, f3IpPrefixListDefaultDisposition, f3IpPrefixListStorageType, f3IpPrefixListRowStatus, f3IpPrefixIndex, f3IpPrefix, f3IpPrefixPriority, f3IpPrefixDisposition, f3IpPrefixLessOrEqualPrefixLen, f3IpPrefixGreaterOrEqualPrefixLen, f3IpPrefixStorageType, f3IpPrefixRowStatus } STATUS current DESCRIPTION "A collection of objects used to manage the L3 functionality." ::= { f3L3Groups 1 } f3L3PerfGroup OBJECT-GROUP OBJECTS { f3L3FlowPointStatsIndex,f3L3FlowPointStatsIntervalType,f3L3FlowPointStatsValid, f3L3FlowPointStatsAction,f3L3FlowPointStatsFMG,f3L3FlowPointStatsFMY,f3L3FlowPointStatsFMRD, f3L3FlowPointStatsFTD,f3L3FlowPointStatsFragmentedDropAcl,f3L3FlowPointStatsAclRuleDrop, f3L3FlowPointStatsTtlEqual1Drop,f3L3FlowPointStatsFrameTx,f3L3FlowPointStatsFrameRx, f3L3FlowPointStatsNoRouteDrop, f3L3FlowPointStatsHopLimitDrop, f3L3FlowPointHistoryIndex,f3L3FlowPointHistoryTime,f3L3FlowPointHistoryValid, f3L3FlowPointHistoryAction,f3L3FlowPointHistoryFMG,f3L3FlowPointHistoryFMY, f3L3FlowPointHistoryFMRD,f3L3FlowPointHistoryFTD,f3L3FlowPointHistoryFragmentedDropAcl, f3L3FlowPointHistoryAclRuleDrop,f3L3FlowPointHistoryTtlEqual1Drop,f3L3FlowPointHistoryFrameTx, f3L3FlowPointHistoryFrameRx,f3L3FlowPointHistoryNoRouteDrop, f3L3FlowPointHistoryHopLimitDrop, f3L3FlowPointThresholdIndex,f3L3FlowPointThresholdInterval,f3L3FlowPointThresholdVariable, f3L3FlowPointThresholdValueLo,f3L3FlowPointThresholdValueHi,f3L3FlowPointThresholdMonValue, f3L3TrafficIpInterfaceStatsIndex,f3L3TrafficIpInterfaceStatsIntervalType, f3L3TrafficIpInterfaceStatsValid,f3L3TrafficIpInterfaceStatsAction,f3L3TrafficIpInterfaceStatsDhcpTx, f3L3TrafficIpInterfaceStatsDhcpRx,f3L3TrafficIpInterfaceStatsIcmpTx, f3L3TrafficIpInterfaceStatsIcmpRx,f3L3TrafficIpInterfaceStatsArpReqTx,f3L3TrafficIpInterfaceStatsArpReqRx, f3L3TrafficIpInterfaceStatsArpReplyTx,f3L3TrafficIpInterfaceStatsArpReplyRx, f3L3TrafficIpInterfaceStatsDhcpV6Tx,f3L3TrafficIpInterfaceStatsDhcpV6Rx, f3L3TrafficIpInterfaceStatsIcmpV6WONdpTx,f3L3TrafficIpInterfaceStatsIcmpV6WONdpRx, f3L3TrafficIpInterfaceStatsNdpNSTx,f3L3TrafficIpInterfaceStatsNdpNSRx, f3L3TrafficIpInterfaceStatsNdpNATx,f3L3TrafficIpInterfaceStatsNdpNARx, f3L3TrafficIpInterfaceStatsNdpRATx,f3L3TrafficIpInterfaceStatsNdpRARx, f3L3TrafficIpInterfaceStatsNdpRSTx,f3L3TrafficIpInterfaceStatsNdpRSRx, f3L3TrafficIpInterfaceHistoryIndex,f3L3TrafficIpInterfaceHistoryTime,f3L3TrafficIpInterfaceHistoryValid, f3L3TrafficIpInterfaceHistoryAction,f3L3TrafficIpInterfaceHistoryDhcpTx,f3L3TrafficIpInterfaceHistoryDhcpRx, f3L3TrafficIpInterfaceHistoryIcmpTx,f3L3TrafficIpInterfaceHistoryIcmpRx, f3L3TrafficIpInterfaceHistoryArpReqTx,f3L3TrafficIpInterfaceHistoryArpReqRx,f3L3TrafficIpInterfaceHistoryArpReplyTx, f3L3TrafficIpInterfaceHistoryArpReplyRx,f3L3TrafficIpInterfaceHistoryDhcpV6Tx, f3L3TrafficIpInterfaceHistoryDhcpV6Rx,f3L3TrafficIpInterfaceHistoryIcmpV6WONdpTx, f3L3TrafficIpInterfaceHistoryIcmpV6WONdpRx,f3L3TrafficIpInterfaceHistoryNdpNSTx, f3L3TrafficIpInterfaceHistoryNdpNSRx,f3L3TrafficIpInterfaceHistoryNdpNATx, f3L3TrafficIpInterfaceHistoryNdpNARx,f3L3TrafficIpInterfaceHistoryNdpRATx, f3L3TrafficIpInterfaceHistoryNdpRARx,f3L3TrafficIpInterfaceHistoryNdpRSTx, f3L3TrafficIpInterfaceHistoryNdpRSRx, f3L3TrafficIpInterfaceThresholdIndex,f3L3TrafficIpInterfaceThresholdInterval,f3L3TrafficIpInterfaceThresholdVariable, f3L3TrafficIpInterfaceThresholdValueLo,f3L3TrafficIpInterfaceThresholdValueHi,f3L3TrafficIpInterfaceThresholdMonValue, f3L3AclRuleStatsIndex,f3L3AclRuleStatsIntervalType,f3L3AclRuleStatsValid,f3L3AclRuleStatsAction, f3L3AclRuleStatsRuleMatch, f3L3AclRuleHistoryIndex,f3L3AclRuleHistoryTime,f3L3AclRuleHistoryValid,f3L3AclRuleHistoryAction, f3L3AclRuleHistoryRuleMatch, f3L3AclRuleThresholdIndex,f3L3AclRuleThresholdInterval,f3L3AclRuleThresholdVariable, f3L3AclRuleThresholdValueLo,f3L3AclRuleThresholdValueHi,f3L3AclRuleThresholdMonValue, f3L2A2NAclRuleStatsIndex,f3L2A2NAclRuleStatsIntervalType,f3L2A2NAclRuleStatsValid,f3L2A2NAclRuleStatsAction, f3L2A2NAclRuleStatsRuleMatch, f3L2A2NAclRuleHistoryIndex,f3L2A2NAclRuleHistoryTime,f3L2A2NAclRuleHistoryValid,f3L2A2NAclRuleHistoryAction, f3L2A2NAclRuleHistoryRuleMatch, f3L2A2NAclRuleThresholdIndex,f3L2A2NAclRuleThresholdInterval,f3L2A2NAclRuleThresholdVariable, f3L2A2NAclRuleThresholdValueLo,f3L2A2NAclRuleThresholdValueHi,f3L2A2NAclRuleThresholdMonValue, f3L2N2AAclRuleStatsIndex,f3L2N2AAclRuleStatsIntervalType,f3L2N2AAclRuleStatsValid,f3L2N2AAclRuleStatsAction, f3L2N2AAclRuleStatsRuleMatch, f3L2N2AAclRuleHistoryIndex,f3L2N2AAclRuleHistoryTime,f3L2N2AAclRuleHistoryValid,f3L2N2AAclRuleHistoryAction, f3L2N2AAclRuleHistoryRuleMatch, f3L2N2AAclRuleThresholdIndex,f3L2N2AAclRuleThresholdInterval,f3L2N2AAclRuleThresholdVariable, f3L2N2AAclRuleThresholdValueLo,f3L2N2AAclRuleThresholdValueHi,f3L2N2AAclRuleThresholdMonValue, f3L3QosPolicerStatsIndex,f3L3QosPolicerStatsIntervalType,f3L3QosPolicerStatsValid, f3L3QosPolicerStatsAction,f3L3QosPolicerStatsFMG,f3L3QosPolicerStatsFMY, f3L3QosPolicerStatsFMYD,f3L3QosPolicerStatsFMRD,f3L3QosPolicerStatsBytesIn, f3L3QosPolicerStatsBytesOut,f3L3QosPolicerStatsABR, f3L3QosPolicerHistoryIndex,f3L3QosPolicerHistoryTime,f3L3QosPolicerHistoryValid, f3L3QosPolicerHistoryAction,f3L3QosPolicerHistoryFMG,f3L3QosPolicerHistoryFMY, f3L3QosPolicerHistoryFMYD,f3L3QosPolicerHistoryFMRD,f3L3QosPolicerHistoryBytesIn, f3L3QosPolicerHistoryBytesOut,f3L3QosPolicerHistoryABR, f3L3QosPolicerThresholdIndex, f3L3QosPolicerThresholdInterval,f3L3QosPolicerThresholdVariable,f3L3QosPolicerThresholdValueLo, f3L3QosPolicerThresholdValueHi,f3L3QosPolicerThresholdMonValue, f3L3QosShaperStatsIndex,f3L3QosShaperStatsIntervalType,f3L3QosShaperStatsValid, f3L3QosShaperStatsAction,f3L3QosShaperStatsBT,f3L3QosShaperStatsBTD,f3L3QosShaperStatsFD, f3L3QosShaperStatsFTD,f3L3QosShaperStatsBR,f3L3QosShaperStatsFR, f3L3QosShaperStatsABRRL,f3L3QosShaperStatsBREDD,f3L3QosShaperStatsFREDD, f3L3QosShaperHistoryIndex,f3L3QosShaperHistoryTime,f3L3QosShaperHistoryValid, f3L3QosShaperHistoryAction,f3L3QosShaperHistoryBT,f3L3QosShaperHistoryBTD, f3L3QosShaperHistoryFD,f3L3QosShaperHistoryFTD,f3L3QosShaperHistoryBR, f3L3QosShaperHistoryFR,f3L3QosShaperHistoryABRRL,f3L3QosShaperHistoryBREDD, f3L3QosShaperHistoryFREDD, f3L3QosShaperThresholdIndex,f3L3QosShaperThresholdInterval,f3L3QosShaperThresholdVariable, f3L3QosShaperThresholdValueLo,f3L3QosShaperThresholdValueHi,f3L3QosShaperThresholdMonValue, cmL3FlowPointStatsIndex, cmL3FlowPointStatsIntervalType, cmL3FlowPointStatsValid, cmL3FlowPointStatsAction, cmL3FlowPointStatsFMG, cmL3FlowPointStatsFMY, cmL3FlowPointStatsFMRD, cmL3FlowPointStatsFTD, cmL3FlowPointStatsFragmentedDropAcl, cmL3FlowPointStatsAclRuleDrop, cmL3FlowPointStatsTtlEqual1Drop, cmL3FlowPointStatsFrameTx, cmL3FlowPointStatsFrameRx, cmL3FlowPointStatsNoRouteDrop, cmL3FlowPointStatsAclDropNoMatch, cmL3FlowPointHistoryIndex, cmL3FlowPointHistoryTime, cmL3FlowPointHistoryValid, cmL3FlowPointHistoryAction, cmL3FlowPointHistoryFMG, cmL3FlowPointHistoryFMY, cmL3FlowPointHistoryFMRD, cmL3FlowPointHistoryFTD, cmL3FlowPointHistoryFragmentedDropAcl, cmL3FlowPointHistoryAclRuleDrop, cmL3FlowPointHistoryTtlEqual1Drop, cmL3FlowPointHistoryFrameTx, cmL3FlowPointHistoryFrameRx, cmL3FlowPointHistoryNoRouteDrop, cmL3FlowPointHistoryAclDropNoMatch, cmL3FlowPointThresholdIndex, cmL3FlowPointThresholdInterval, cmL3FlowPointThresholdVariable, cmL3FlowPointThresholdValueLo, cmL3FlowPointThresholdValueHi, cmL3FlowPointThresholdMonValue, cmL3QosPolicerStatsIndex, cmL3QosPolicerStatsIntervalType, cmL3QosPolicerStatsValid, cmL3QosPolicerStatsAction, cmL3QosPolicerStatsFMG, cmL3QosPolicerStatsFMY, cmL3QosPolicerStatsFMYD, cmL3QosPolicerStatsFMRD, cmL3QosPolicerStatsBytesIn, cmL3QosPolicerStatsBytesOut, cmL3QosPolicerStatsABR, cmL3QosPolicerHistoryIndex, cmL3QosPolicerHistoryTime, cmL3QosPolicerHistoryValid, cmL3QosPolicerHistoryAction, cmL3QosPolicerHistoryFMG, cmL3QosPolicerHistoryFMY, cmL3QosPolicerHistoryFMYD, cmL3QosPolicerHistoryFMRD, cmL3QosPolicerHistoryBytesIn, cmL3QosPolicerHistoryBytesOut, cmL3QosPolicerHistoryABR, cmL3QosPolicerThresholdIndex, cmL3QosPolicerThresholdInterval, cmL3QosPolicerThresholdVariable, cmL3QosPolicerThresholdValueLo, cmL3QosPolicerThresholdValueHi, cmL3QosPolicerThresholdMonValue, cmL3QosShaperStatsIndex, cmL3QosShaperStatsIntervalType, cmL3QosShaperStatsValid, cmL3QosShaperStatsAction, cmL3QosShaperStatsBT, cmL3QosShaperStatsBTD, cmL3QosShaperStatsFD, cmL3QosShaperStatsFTD, cmL3QosShaperStatsBR, cmL3QosShaperStatsFR, cmL3QosShaperStatsABRRL, cmL3QosShaperStatsABRRLR, cmL3QosShaperStatsBREDD, cmL3QosShaperStatsFREDD, cmL3QosShaperHistoryFTD, cmL3QosShaperHistoryBR, cmL3QosShaperHistoryFR, cmL3QosShaperHistoryABRRL, cmL3QosShaperHistoryABRRLR, cmL3QosShaperHistoryBREDD, cmL3QosShaperHistoryFREDD, cmL3QosShaperThresholdIndex, cmL3QosShaperThresholdInterval, cmL3QosShaperThresholdVariable, cmL3QosShaperThresholdValueLo, cmL3QosShaperThresholdValueHi, cmL3QosShaperThresholdMonValue } STATUS current DESCRIPTION "A collection of objects performance used to manage the L3 functionality." ::= { f3L3Groups 2 } f3L3TrafficOspfGroup OBJECT-GROUP OBJECTS { f3VrfOspfRouterIndex, f3VrfOspfRouterAdminState, f3VrfOspfRouterSecondaryState, f3VrfOspfRouterOperationalState, f3VrfOspfRouterId, f3VrfOspfRouterDescription, f3VrfOspfRouterBgpRoutesRedistributeToOspf, f3VrfOspfRouterBgpRoutesMetricType, f3VrfOspfRouterBgpRoutesMetric, f3VrfOspfRouterStaticRoutesRedistributeToOspf, f3VrfOspfRouterStaticRoutesMetricType, f3VrfOspfRouterStaticRoutesMetric, f3VrfOspfRouterConnectedRoutesRedistributeToOspf, f3VrfOspfRouterConnectedRoutesMetricType, f3VrfOspfRouterConnectedRoutesMetric, f3VrfOspfRouterDhcpRoutesRedistributeToOspf, f3VrfOspfRouterDhcpRoutesMetricType, f3VrfOspfRouterDhcpRoutesMetric, f3VrfOspfRouterStorageType, f3VrfOspfRouterRowStatus, f3VrfOspfRouterAction, f3VrfOspfRouterVersion, f3VrfOspfRouterAdministrativeDistance, f3VrfOspfRouterSlaacRoutesRedistributeToOspf, f3VrfOspfRouterSlaacRoutesMetricType, f3VrfOspfRouterSlaacRoutesMetric, f3VrfOspfRouterEcmpMaximumPaths, f3VrfOspfRouterSrControl, f3VrfOspfRouterConvergenceTime, f3L3TrafficOspfAreaIndex, f3L3TrafficOspfAreaType, f3L3TrafficOspfAreaDefaultCost, f3L3TrafficOspfAreaId, f3L3TrafficOspfAreaStorageType, f3L3TrafficOspfAreaRowStatus, f3L3TrafficOspfAreaAuthType, f3L3TrafficOspfAreaSimpleAuthKey, f3L3TrafficOspfAreaCryptoKeyId, f3L3TrafficOspfAreaIfMemberObject, f3L3TrafficOspfAreaIfMemberStorageType, f3L3TrafficOspfAreaIfMemberRowStatus, f3VrfLoopbackInterfaceIndex, f3VrfLoopbackInterfaceName, f3VrfLoopbackInterfaceIpAddress, f3VrfLoopbackInterfaceNetMask, f3VrfLoopbackInterfaceCIRLo, f3VrfLoopbackInterfaceCIRHi, f3VrfLoopbackInterfaceStorageType, f3VrfLoopbackInterfaceRowStatus, f3VrfLoopbackInterfaceIpMode, f3VrfLoopbackInterfaceIpv6Address, f3VrfLoopbackInterfaceIpv6AddrPrefixLen, f3L3TrafficOspfAsLsDbType, f3L3TrafficOspfAsLsDbId, f3L3TrafficOspfAsLsDbRouterId, f3L3TrafficOspfAsLsDbChecksum, f3L3TrafficOspfAsLsDbSeqNum, f3L3TrafficOspfAsLsDbAge, f3L3TrafficOspfLsDbType, f3L3TrafficOspfLsDbId, f3L3TrafficOspfLsDbRouterId, f3L3TrafficOspfLsDbAreaId, f3L3TrafficOspfLsDbChecksum, f3L3TrafficOspfLsDbSeqNum, f3L3TrafficOspfLsDbAge, f3L3TrafficOspfNeighborIpAddress, f3L3TrafficOspfNeighborInterface, f3L3TrafficOspfNeighborRouterId, f3L3TrafficOspfNeighborState, f3L3TrafficOspfNeighborRole, f3L3TrafficOspfNeighborPriority, f3L3TrafficOspfNeighborDeadTime, f3L3TrafficOspfNeighborLocalInterfaceName, f3L3TrafficIPIfOspfAreaId, f3L3TrafficIPIfOspfCost, f3L3TrafficIPIfOspfIfType, f3L3TrafficIPIfOspfRtrPriority, f3L3TrafficIPIfOspfHelloInterval, f3L3TrafficIPIfOspfDeadInterval, f3L3TrafficIPIfOspfTransmitDelay, f3L3TrafficIPIfOspfRetransmitInterval, f3L3TrafficIPIfOspfState, f3L3TrafficIPIfOspfDesignatedRouterId, f3L3TrafficIPIfOspfBackupDesignatedRouterId, f3L3TrafficIPIfOspfAuthType, f3L3TrafficIPIfOspfSimpleAuthKey, f3L3TrafficIPIfospfCryptoKeyId, f3L3TrafficOspfInterfaceIndex, f3L3TrafficOspfInterfaceOspfCost, f3L3TrafficOspfInterfaceType, f3L3TrafficOspfInterfaceOspfRtrPriority, f3L3TrafficOspfInterfaceOspfHelloInterval, f3L3TrafficOspfInterfaceOspfDeadInterval, f3L3TrafficOspfInterfaceOspfTransmitDelay, f3L3TrafficOspfInterfaceOspfRetransmitInterval, f3L3TrafficOspfInterfaceState, f3L3TrafficOspfInterfaceOspfDesignatedRouterId, f3L3TrafficOspfInterfaceOspfBackupDesignatedRouterId, f3L3TrafficOspfInterfaceOspfAuthType, f3L3TrafficOspfInterfaceOspfSimpleAuthKey, f3L3TrafficOspfInterfaceOspfCryptoKeyId, f3L3TrafficOspfInterfaceOspfInstanceId, f3L3TrafficOspfInterfaceId, f3L3TrafficOspfInterfaceLinkLsaSuppression, f3L3TrafficOspfInterfacePassiveControl, f3L3TrafficOspfInterfaceAssociatedIpInterface, f3L3TrafficOspfInterfaceStorageType, f3L3TrafficOspfInterfaceRowStatus, f3L3TrafficOspfInterfaceTilfaControl, f3L3TrafficOspfInterfaceTilfaProtectionType, f3L3TrafficOspfV3NeighborRouterId, f3L3TrafficOspfV3NeighborInterfaceId, f3L3TrafficOspfV3NeighborPriority, f3L3TrafficOspfV3NeighborDeadTime, f3L3TrafficOspfV3NeighborLocalInterfaceName, f3L3TrafficOspfV3NeighborState, f3L3TrafficOspfV3NeighborRole, f3L3TrafficOspfV3NeighborIpAddress, f3L3TrafficOspfLinkLsDbInterfaceId, f3L3TrafficOspfLinkLsDbInterface, f3L3TrafficOspfLinkLsDbType, f3L3TrafficOspfLinkLsDbId, f3L3TrafficOspfLinkLsDbAdvRouterId, f3L3TrafficOspfLinkLsDbAreaId, f3L3TrafficOspfLinkLsDbChecksum, f3L3TrafficOspfLinkLsDbSeqNum, f3L3TrafficOspfLinkLsDbAge, f3L3TrafficOspfLinkLsDbRtrPriority, f3L3TrafficOspfLinkLsDbLinkLocalAddress, f3L3TrafficOspfLinkLsDbPrefixList } STATUS current DESCRIPTION "A collection of objects used to manage the L3 Ospf functionality." ::= { f3L3Groups 3 } f3L3TrafficIPv6Group OBJECT-GROUP OBJECTS { f3L3TrafficIPv6IfIndex, f3L3TrafficIPv6IfName, f3L3TrafficIPv6IfAdminState, f3L3TrafficIPv6IfSecondaryState, f3L3TrafficIPv6IfOperationalState, f3L3TrafficIPv6IfType, f3L3TrafficIPv6IfLinkLocalAddr, f3L3TrafficIPv6IfLinkLocalAddrMode, f3L3TrafficIPv6IfMtu, f3L3TrafficIPv6IfStatelessAddrAutoconfigEnabled, f3L3TrafficIPv6IfDefaultGateway, f3L3TrafficIPv6IfIcmpErrorMsgRateLimit, f3L3TrafficIPv6IfDhcpRole, f3L3TrafficIPv6IfDhcpEnabled, f3L3TrafficIPv6IfDhcpRapidCommitControlEnabled, f3L3TrafficIPv6IfMaxRAInterval, f3L3TrafficIPv6IfMinRAInterval, f3L3TrafficIPv6IfRouterLifeTime, f3L3TrafficIPv6IfReachableTime, f3L3TrafficIPv6IfRaDhcpMoreConfigEnabled, f3L3TrafficIPv6IfRaManagedAddressConfigEnabled, f3L3TrafficIPv6IfRaRDNSSOptionEnabled, f3L3TrafficIPv6IfRaRDNSSLifeTime, f3L3TrafficIPv6IfRaDNSSList, f3L3TrafficIPv6IfRaDefaultRouterPreference, f3L3TrafficIPv6IfDupAddrDetectControl, f3L3TrafficIPv6IfDupAddrDetectTransmits, f3L3TrafficIPv6IfDupAddrDetectRetransTimer, f3L3TrafficIPv6IfStorageType, f3L3TrafficIPv6IfRowStatus, f3L3TrafficIPv6IfAction, f3L3TrafficIPv6AddrIndex, f3L3TrafficIPv6AddrAssignMode, f3L3TrafficIPv6AddrUnicastAddr, f3L3TrafficIPv6AddrUnicastAddrPrefixLength, f3L3TrafficIPv6AddrUnicastAddrAutoGenPrefix, f3L3TrafficIPv6AddrStorageType, f3L3TrafficIPv6AddrRowStatus, f3L3TrafficIPv6PrefixIndex, f3L3TrafficIPv6PrefixRaPrefixAdvEnabled, f3L3TrafficIPv6PrefixRaPrefix, f3L3TrafficIPv6PrefixRaPrefixLength, f3L3TrafficIPv6PrefixValidLifeTime, f3L3TrafficIPv6PrefixPreferredLifeTime, f3L3TrafficIPv6PrefixStorageType, f3L3TrafficIPv6PrefixRowStatus, f3L3TrafficIPv6NdpIPv6Addr, f3L3TrafficIPv6NdpInterface, f3L3TrafficIPv6NdpMacAddress, f3L3TrafficIPv6NdpType, f3L3TrafficIPv6NdpReachabilityState, f3L3TrafficIPv6NdpAge, f3L3TrafficIPv6NdpStorageType, f3L3TrafficIPv6NdpRowStatus, f3L3TrafficIpv6RouteDest, f3L3TrafficIpv6RoutePrefixLength, f3L3TrafficIpv6RouteGateway, f3L3TrafficIpv6RouteInterface, f3L3TrafficIpv6RouteMetric, f3L3TrafficIpv6RouteType, f3L3TrafficIpv6RouteAdvertise, f3L3TrafficIpv6RouteStatus, f3L3TrafficIpv6RouteFlags, f3L3TrafficIpv6RouteOrigin, f3L3TrafficIpv6RouteStorageType, f3L3TrafficIpv6RouteRowStatus, f3DhcpV6RelayAgentIndex, f3DhcpV6RelayAgentAlias, f3DhcpV6RelayAgentAdminState, f3DhcpV6RelayAgentSecondaryState, f3DhcpV6RelayAgentOperationalState, f3DhcpV6RelayAgentServerIpAddress, f3DhcpV6RelayAgentServerIpInteface, f3DhcpV6RelayAgentStorageType, f3DhcpV6RelayAgentRowStatus, f3DhcpV6RelayAgentClientTrafficIpIfMemberObject, f3DhcpV6RelayAgentClientTrafficIpIfMemberStorageType, f3DhcpV6RelayAgentClientTrafficIpIfMemberRowStatus, f3L3TrafficIPInterfaceIPv6AddressIndex, f3L3TrafficIPInterfaceIPv6AddressAssignMode, f3L3TrafficIPInterfaceIPv6AddressUnicastAddr, f3L3TrafficIPInterfaceIPv6AddressUnicastAddrPrefixLength, f3L3TrafficIPInterfaceIPv6AddressUnicastAddrAutoGenPrefix, f3L3TrafficIPInterfaceIPv6AddressStorageType, f3L3TrafficIPInterfaceIPv6AddressRowStatus, f3L3TrafficIPInterfaceRAPrefixIndex, f3L3TrafficIPInterfaceRAPrefixAdvertiseEnabled, f3L3TrafficIPInterfaceRAPrefix, f3L3TrafficIPInterfaceRAPrefixLength, f3L3TrafficIPInterfaceRAPrefixValidLifeTime, f3L3TrafficIPInterfaceRAPrefixPreferredLifeTime, f3L3TrafficIPInterfaceRAPrefixStorageType, f3L3TrafficIPInterfaceRAPrefixRowStatus, f3L3TrafficIPInterfaceNdpIPv6Addr, f3L3TrafficIPInterfaceNdpInterface, f3L3TrafficIPInterfaceNdpMacAddress, f3L3TrafficIPInterfaceNdpType, f3L3TrafficIPInterfaceNdpReachabilityState, f3L3TrafficIPInterfaceNdpAge, f3L3TrafficIPInterfaceNdpStorageType, f3L3TrafficIPInterfaceNdpRowStatus } STATUS current DESCRIPTION "A collection of objects used to manage the traffic ipv6 functionality." ::= { f3L3Groups 4 } f3L3TrafficBgpGroup OBJECT-GROUP OBJECTS { f3L3TrafficBgpRouterIndex, f3L3TrafficBgpRouterAdminState, f3L3TrafficBgpRouterSecondaryState, f3L3TrafficBgpRouterOperationalState, f3L3TrafficBgpRouterId, f3L3TrafficBgpRouterAsNumber, f3L3TrafficBgpRouterConnectedRoutesRedistControl, f3L3TrafficBgpRouterOspfRoutesRedistControl, f3L3TrafficBgpRouterStaticRoutesRedistControl, f3L3TrafficBgpRouterDhcpRoutesRedistControl, f3L3TrafficBgpRouterStorageType, f3L3TrafficBgpRouterRowStatus, f3L3TrafficBgpRouterAction, f3L3TrafficBgpRouterIBgpAdminDistance, f3L3TrafficBgpRouterEBgpAdminDistance, f3L3TrafficBgpRouterEcmpMaximumPaths, f3L3TrafficBgpRouterRestartTime, f3L3TrafficBgpRouterStaleRoutesTime, f3L3TrafficBgpRouteNetwork, f3L3TrafficBgpRouteMetric, f3L3TrafficBgpRouteNextHop, f3L3TrafficBgpRoutePath, f3L3TrafficBgpPeerIndex, f3L3TrafficBgpPeerAdminState, f3L3TrafficBgpPeerSecondaryState, f3L3TrafficBgpPeerOperationalState, f3L3TrafficBgpPeerIpv4Addr, f3L3TrafficBgpPeerAsNumber, f3L3TrafficBgpPeerDescription, f3L3TrafficBgpPeerBgpSessionState, f3L3TrafficBgpPeerHoldTime, f3L3TrafficBgpPeerStartupHoldTime, f3L3TrafficBgpPeerKeepAliveTime, f3L3TrafficBgpPeerConnectRetryTime, f3L3TrafficBgpPeerUpdateSourceIp, f3L3TrafficBgpPeerAuthenticationKey, f3L3TrafficBgpPeerTimeSinceUpTransition, f3L3TrafficBgpPeerTimeSinceDownTransition, f3L3TrafficBgpPeerStorageType, f3L3TrafficBgpPeerRowStatus, f3L3TrafficBgpPeerIpVersion, f3L3TrafficBgpPeerIpv6Address, f3L3TrafficBgpPeerUpdateSourceIpv6, f3L3TrafficBgpPeerMultihopControl, f3L3TrafficBgpPeerMultihopTtl, f3L3TrafficBgpPeerUpdateSourceInterface, f3L3TrafficBgpPeerUpdateSourceType, f3L3TrafficBgpPeerLocalPreference, f3L3TrafficBgpPeerRouteReflectorClient, f3L3TrafficBgpPeerRouteReflectorClusterId, f3L3TrafficBgpPeerBgpRouteInboundFilter, f3L3TrafficBgpPeerBgpRouteOutboundFilter, f3L3TrafficBgpPeerBgpGracefulRestart, f3L3TrafficBgpPeerPeerRestartTime, f3L3TrafficBgpPeerPeerRestarting, f3L3TrafficBgpPeerAddressFamilyIndex, f3L3TrafficBgpPeerAddressFamilyName, f3L3TrafficBgpPeerAddressFamilyRedistOspfRoute, f3L3TrafficBgpPeerAddressFamilyRedistConnectedRoute, f3L3TrafficBgpPeerAddressFamilyRedistStaticRoute, f3L3TrafficBgpPeerAddressFamilyRedistDhcpRoute, f3L3TrafficBgpPeerAddressFamilyRedistSlaacRoute, f3L3TrafficBgpPeerAddressFamilySendDefaultRoute, f3L3TrafficBgpPeerAddressFamilyNextHopType, f3L3TrafficBgpPeerAddressFamilyNextHopIpv4, f3L3TrafficBgpPeerAddressFamilyNextHopIpv6, f3L3TrafficBgpPeerAddressFamilyExtNextHopControl, f3L3TrafficBgpPeerAddressFamilyStorageType, f3L3TrafficBgpPeerAddressFamilyRowStatus, f3L3TrafficBgpRIBRouteIndex, f3L3TrafficBgpRIBRouteNetwork, f3L3TrafficBgpRIBRouteNextHop, f3L3TrafficBgpRIBRouteMetric, f3L3TrafficBgpRIBRoutePath, f3L3TrafficBgpRouteV2Network, f3L3TrafficBgpRouteV2NextHop, f3L3TrafficBgpRouteV2Metric, f3L3TrafficBgpRouteV2Path, f3L3TrafficBgpRouteV2LocalPreference, f3L3TrafficBgpPeerAddressFamilyAdvPrefix, f3L3TrafficBgpPeerAddressFamilyAdvPrefixStorageType, f3L3TrafficBgpPeerAddressFamilyAdvPrefixRowStatus, f3L3TrafficBgpInRouteIndex, f3L3TrafficBgpInRouteNetwork, f3L3TrafficBgpInRouteNextHop, f3L3TrafficBgpInRouteMetric, f3L3TrafficBgpInRoutePath, f3L3TrafficBgpInRouteLocalPreference } STATUS current DESCRIPTION "A collection of objects used to manage the traffic BGP functionality." ::= { f3L3Groups 5 } END