F3-OSPF-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-COMPLIANCE, OBJECT-GROUP 
             FROM SNMPv2-CONF
    MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32,
    Gauge32, Counter32
             FROM SNMPv2-SMI
    RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue,
    VariablePointer
             FROM SNMPv2-TC
    fsp150cm
             FROM ADVA-MIB
    RouterID, AreaID, HelloRange, DesignatedRouterPriority,
    OspfAuthenticationType, ospfNbrEntry
             FROM OSPF-MIB
    cmIpInterfaceEntry, ipManagementTunnelEntry
             FROM CM-IP-MIB
    F3DisplayString
             FROM CM-COMMON-MIB;

f3OspfMIB MODULE-IDENTITY
    LAST-UPDATED        "201802130000Z"
    ORGANIZATION    "ADVA Optical Networking SE"
    CONTACT-INFO
        "Web URL: http://adva.com/
        E-mail:  support@adva.com
        Postal:  ADVA Optical Networking SE
             Campus Martinsried
             Fraunhoferstrasse 9a
             82152 Martinsried/Munich
             Germany
        Phone: +49 089 89 06 65 0
        Fax:  +49 089 89 06 65 199 "
    DESCRIPTION
            "This module defines the OSPF MIB definitions 
             used by the F3 (FSP150CM/CC) product lines.  
             Copyright (C) ADVA."
    REVISION        "201802130000Z"
    DESCRIPTION
        "
         Notes from release 201802130000Z
         (1) added the following attributes to f3OspfRouterTable
             f3OspfRouterRipRedistributionEnabled,f3OspfRouterRipMetricType,f3OspfRouterRipMetric,
             f3OspfRouterAsbrStatus
         (2) obsoleted f3OspfRouterMetricType, f3OspfRouterMetric, f3OspfRouterRedistributionType
         (3) added the following attributes to f3OspfIpInterfaceExtTable
             f3OspfIpInterfaceExtOspfEnabled,f3OspfIpInterfaceExtOspfAreaId,f3OspfIpInterfaceExtPassiveEnabled
         (4) obsoleted f3OspfIpInterfaceExtStatus,f3OspfIpInterfaceExtAreaId
         (5) added the following attributes to f3OspfIpMgmtTunnelExtTable
             f3OspfIpMgmtTunnelExtOspfEnabled,f3OspfIpMgmtTunnelExtOspfAreaId,f3OspfIpMgmtTunnelExtPassiveEnabled
         (6) added two new tables: f3OspfLoopbackInterfaceExtTable, f3OspfAreaInterfaceTable
 
         Notes from release 201410060000Z,
         (1) MIB version ready for release FSP150CC 6.6.CC."

    ::= {fsp150cm 35}

OspfMetricType ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
          "The metric type can be specified to define
          how the cost of redistributed routes are to be
          calculated. A metric type of E1 means that 
          the redistribution cost plus the cost to the ASBR is          
          used for the route while a metric type of E2 means 
          that only the redistributed cost is used."
       SYNTAX       INTEGER {
                       e1 (1),
                       e2 (2)
                    }

OspfRedistributionType ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
          "Enables redistribution of routes of a specific
          protocol or kind into OSPF. The only supported
          type is RIP."
       SYNTAX       INTEGER {
                       none (1),
                       rip (2)
                    }
                    
OspfState ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
          "Allows user configuration of the behavior associated 
          with the OSPF interface. 
            ENABLED - OSPF is enabled and the interface 
            will send HELLOs and form adjacencies.
            DISABLED - the interface is not advertised 
            and does not participate in OSPF message exchanges.
            PASSIVE - the interface will be advertised as a stub 
            link but will not participate in OSPF message exchange."
       SYNTAX       INTEGER {
                       enabled (1),
                       disabled (2),
                       passive (3)
                    }
                    
OspfAreaType ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
          "The OSPF area type."
       SYNTAX       INTEGER {
                       normal (1),
                       stub (2)
                    }


OspfRole ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
          "The OSPF role of the neighbor router."
       SYNTAX       INTEGER {
                       bdr (1),
                       dr (2),
                       drother (3)   
                    }
              

-- 
-- OID definitions
-- 

f3OspfConfigObjects      OBJECT IDENTIFIER ::= {f3OspfMIB 1}
f3OspfConformance        OBJECT IDENTIFIER ::= {f3OspfMIB 2}

--
--  OSPF Router
--

f3OspfRouterTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF F3OspfRouterEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of entries corresponding to OSPF Router 
             instance for configuration purposes."
    ::= { f3OspfConfigObjects 1 }

f3OspfRouterEntry OBJECT-TYPE
    SYNTAX      F3OspfRouterEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the f3OspfRouterTable."
    INDEX { f3OspfRouterIndex }
    ::= { f3OspfRouterTable 1 }

F3OspfRouterEntry ::= SEQUENCE {
    f3OspfRouterIndex                       RouterID,
    f3OspfRouterMetricType                  OspfMetricType,    
    f3OspfRouterMetric                      Integer32,
    f3OspfRouterRedistributionType          OspfRedistributionType,
    f3OspfRouterNumAttachedAreas            Unsigned32,
    f3OspfRouterAreaBdrRtrStatus            TruthValue,
    f3OspfRouterStorageType                 StorageType,
    f3OspfRouterRowStatus                   RowStatus,
    f3OspfRouterRipRedistributionEnabled    TruthValue,
    f3OspfRouterRipMetricType               OspfMetricType,    
    f3OspfRouterRipMetric                   Integer32,
    f3OspfRouterAsbrStatus                  TruthValue
}

f3OspfRouterIndex OBJECT-TYPE
    SYNTAX        RouterID
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
         "A 32-bit integer uniquely identifying the 
         router in the Autonomous System.
         By convention, to ensure uniqueness, this
         should default to the value of one of the
         router's IP interface addresses."
    ::= { f3OspfRouterEntry 1 }

f3OspfRouterMetricType OBJECT-TYPE
    SYNTAX        OspfMetricType
    MAX-ACCESS    read-create
    STATUS        obsolete
    DESCRIPTION
         "The metric type can be specified to define how the cost of 
         redistributed routes are to be calculated. This attribute must 
         be set to zero if f3OspfRouterMetric has been specified."
    ::= { f3OspfRouterEntry 2 }

f3OspfRouterMetric OBJECT-TYPE
    SYNTAX        Integer32 (0..16777214)
    MAX-ACCESS    read-create
    STATUS        obsolete
    DESCRIPTION
         "The metric value to use as the default cost to be
         associated with any redistributed routes. This attribute must be set
         to zero if the f3OspfRouterMetricType has been specified"
    ::= { f3OspfRouterEntry 3 }
    
f3OspfRouterRedistributionType OBJECT-TYPE
    SYNTAX        OspfRedistributionType
    MAX-ACCESS    read-create
    STATUS        obsolete
    DESCRIPTION
         "The redistribution type is used to enable redistribution of routes of
         a specified protocol."
    ::= { f3OspfRouterEntry 4 }
    
f3OspfRouterNumAttachedAreas OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
         "Number of attached areas for the OSPF Router."
    ::= { f3OspfRouterEntry 5 }

f3OspfRouterAreaBdrRtrStatus OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "A flag to note whether this router is an Area
         Border Router."
    ::= { f3OspfRouterEntry 6 }
   
f3OspfRouterStorageType OBJECT-TYPE
    SYNTAX        StorageType
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "The type of storage configured for this entry."
    ::= { f3OspfRouterEntry 7 }
    
f3OspfRouterRowStatus OBJECT-TYPE
    SYNTAX        RowStatus
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "The status of this row.  An entry MUST NOT exist in the 
         active state unless all objects in the entry have an 
         appropriate value, as described
         in the description clause for each writable object.

         The values of f3OspfRouterRowStatus supported are
         createAndGo(4) and destroy(6).  All mandatory attributes
         must be specified in a single SNMP SET request with
         f3OspfRouterRowStatus value as createAndGo(4).
         Upon successful row creation, this object has a
         value of active(1).
         
         The f3OspfRouterRowStatus object may be modified if
         the associated instance of this object is equal to active(1)."
    ::= { f3OspfRouterEntry 8 }

f3OspfRouterRipRedistributionEnabled OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "The redistribution control is used to enable redistribution of RIP routes."
    ::= { f3OspfRouterEntry 9 }

f3OspfRouterRipMetricType OBJECT-TYPE
    SYNTAX        OspfMetricType
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "The metric type can be specified to define how the cost of 
         redistributed RIP routes are to be calculated. This attribute must 
         be set to zero if f3OspfRipRouterMetric has been specified."
    ::= { f3OspfRouterEntry 10 }

f3OspfRouterRipMetric OBJECT-TYPE
    SYNTAX        Integer32 (0..16777214)
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "The metric value to use as the default cost to be
         associated with any redistributed RIP routes. This attribute must be set
         to zero if the f3OspfRouterRipMetricType has been specified"
    ::= { f3OspfRouterEntry 11 }

f3OspfRouterAsbrStatus OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
         "A flag to note whether this router is an Autonomous System
         Border Router."
    ::= { f3OspfRouterEntry 12 }
    

--
--  OSPF Area Table
--

f3OspfAreaTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF F3OspfAreaEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of entries corresponding to OSPF Area
            configuration purposes."
    ::= { f3OspfConfigObjects 2 }

f3OspfAreaEntry OBJECT-TYPE
    SYNTAX      F3OspfAreaEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the f3OspfAreaTable."
    INDEX { f3OspfAreaId }
    ::= { f3OspfAreaTable 1 }

F3OspfAreaEntry ::= SEQUENCE {
    f3OspfAreaId                                AreaID,
    f3OspfAreaType                              OspfAreaType,
    f3OspfAreaAuthType                          OspfAuthenticationType,
    f3OspfAreaDefaultCost                       Unsigned32,
    f3OspfAreaSpfRuns                           Counter32,
    f3OspfAreaLsaCount                          Gauge32,
    f3OspfAreaStorageType                       StorageType,
    f3OspfAreaRowStatus                         RowStatus,
    f3OspfAreaInterfaceList                     F3DisplayString
}

f3OspfAreaId OBJECT-TYPE
    SYNTAX      AreaID
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A 32-bit integer uniquely identifying an area.
        Area ID 0.0.0.0 is used for the OSPF backbone."
    ::= { f3OspfAreaEntry 1 }

f3OspfAreaType OBJECT-TYPE
    SYNTAX      OspfAreaType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The type of an area."
    ::= { f3OspfAreaEntry 2 }

f3OspfAreaAuthType OBJECT-TYPE
    SYNTAX      OspfAuthenticationType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The authentication type specifies whether no authentication, simple 
        authentication, or MD5 authentication is required for this area.  Keying
        information must be configured on a per-interface basis.  This only 
        applies to non-stubby areas."
    ::= { f3OspfAreaEntry 3 }

f3OspfAreaDefaultCost OBJECT-TYPE
    SYNTAX      Unsigned32 (0..16777215)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The default cost for summary LSA's announced to stubby areas. This only
        applies to stubby areas."
    ::= { f3OspfAreaEntry 4 }
    
f3OspfAreaSpfRuns OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A count of the number of times the Shortest Path algorithm has been
        run for this area."
    ::= { f3OspfAreaEntry 5 }
    
f3OspfAreaLsaCount OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of link state advertisements
        in this area's link state database, excluding
        AS-external LSAs."
    ::= { f3OspfAreaEntry 6 }

f3OspfAreaStorageType OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The type of storage configured for this entry."
    ::= { f3OspfAreaEntry 7 }
    
f3OspfAreaRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this row.  An entry MUST NOT exist in the 
        active state unless all objects in the entry have an 
        appropriate value, as described
        in the description clause for each writable object.

        The values of f3OspfAreaRowStatus supported are
        createAndGo(4) and destroy(6).  All mandatory attributes
        must be specified in a single SNMP SET request with
        f3OspfAreaRowStatus value as createAndGo(4).  
        Upon successful row creation, this object has a
        value of active(1).
        
        The f3OspfAreaRowStatus object may be modified if
        the associated instance of this object is equal to active(1)."
    ::= { f3OspfAreaEntry 8 }

f3OspfAreaInterfaceList OBJECT-TYPE
    SYNTAX      F3DisplayString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "This object only used to display trap and interface list.
          Interfaces can be added via f3OspfAreaInterfaceTable." 
    ::= { f3OspfAreaEntry 9 }    

--
--  OSPF IP Interface Ext Table
--

f3OspfIpInterfaceExtTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF F3OspfIpInterfaceExtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of entries corresponding to OSPF Interface
            configuration purposes. This table extends cmIpInterfaceTable 
            from CM-IP-MIB."
    ::= { f3OspfConfigObjects 3 }

f3OspfIpInterfaceExtEntry OBJECT-TYPE
    SYNTAX      F3OspfIpInterfaceExtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the f3OspfIpInterfaceExtTable."
    AUGMENTS { cmIpInterfaceEntry }
    ::= { f3OspfIpInterfaceExtTable 1 }

F3OspfIpInterfaceExtEntry ::= SEQUENCE {
    f3OspfIpInterfaceExtStatus                     OspfState,
    f3OspfIpInterfaceExtAreaId                     AreaID,
    f3OspfIpInterfaceExtIfType                     INTEGER,
    f3OspfIpInterfaceExtHelloInterval              HelloRange,
    f3OspfIpInterfaceExtRtrDeadInterval            Integer32,
    f3OspfIpInterfaceExtRetransInterval            Integer32,
    f3OspfIpInterfaceExtRtrPriority                DesignatedRouterPriority,
    f3OspfIpInterfaceExtCost                       Integer32,
    f3OspfIpInterfaceExtAuthType                   OspfAuthenticationType,
    f3OspfIpInterfaceExtAuthKey                    OCTET STRING,
    f3OspfIpInterfaceExtOspfEnabled                TruthValue,
    f3OspfIpInterfaceExtOspfAreaId                 AreaID,
    f3OspfIpInterfaceExtPassiveEnabled             TruthValue
}
    
f3OspfIpInterfaceExtStatus OBJECT-TYPE
    SYNTAX      OspfState   
    MAX-ACCESS  read-write
    STATUS      obsolete
    DESCRIPTION
        "The OSPF admin status for the IP Interface."
    DEFVAL { enabled }
    ::= { f3OspfIpInterfaceExtEntry 1 }
 
f3OspfIpInterfaceExtAreaId OBJECT-TYPE
    SYNTAX      AreaID
    MAX-ACCESS  read-write
    STATUS      obsolete
    DESCRIPTION
        "The Area ID with which this IP Interface is associated."
    DEFVAL { '00000000'H }
    ::= { f3OspfIpInterfaceExtEntry 2 }
   
f3OspfIpInterfaceExtIfType OBJECT-TYPE
    SYNTAX       INTEGER {
                    broadcast (1),
                    nbma (2),
                    pointToPoint (3),
                    pointToMultipoint (5)
                    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The OSPF interface type for the IP Interface."
    ::= { f3OspfIpInterfaceExtEntry 3 }

f3OspfIpInterfaceExtHelloInterval OBJECT-TYPE
    SYNTAX      HelloRange
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The number of seconds between OSPF Hello packets for the IP Interface."
    DEFVAL { 10 }
    ::= { f3OspfIpInterfaceExtEntry 4 }
    
f3OspfIpInterfaceExtRtrDeadInterval OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)  
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The number of seconds that must pass from the last received Hello 
        packet before a neighbor router is declared down."
    DEFVAL { 40 }
    ::= { f3OspfIpInterfaceExtEntry 5 }
    
f3OspfIpInterfaceExtRetransInterval OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    UNITS       "seconds"    
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The number of seconds for the Retransmit Timer Interval value for 
        the IP Interface. The value is used when retransmitting Database 
        Description and Link State Request packets."
    DEFVAL { 5 }
    ::= { f3OspfIpInterfaceExtEntry 6 }
    
f3OspfIpInterfaceExtRtrPriority OBJECT-TYPE
    SYNTAX      DesignatedRouterPriority  
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The OSPF router priority for the IP Interface.  The router with the
        highest priority will be more eligible to become Designated Router.
        Setting the value to 0 makes the router ineligible to become the 
        Designated Router."
    DEFVAL { 1 }        
    ::= { f3OspfIpInterfaceExtEntry 7 }
    
f3OspfIpInterfaceExtCost OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The cost associated with the IP Interface for use in the Shortest
        Path calculations."
    ::= { f3OspfIpInterfaceExtEntry 8 }
    
f3OspfIpInterfaceExtAuthType OBJECT-TYPE
    SYNTAX      OspfAuthenticationType  
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The OSPF authentication type for the IP Interface.  This value 
        supersedes the authentication type defined for the Area."
    DEFVAL { none }
    ::= { f3OspfIpInterfaceExtEntry 9 }
    
f3OspfIpInterfaceExtAuthKey OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The OSPF authentication key for the IP Interface.  
        If the authentication type is Simple, the authentication key is 
        limited to 8 characters.  If the authentication type is MD5, the
        authentication key is up to 16 characters."
    DEFVAL { '0000000000000000'H }
    ::= { f3OspfIpInterfaceExtEntry 10 }

f3OspfIpInterfaceExtOspfEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The OSPF status for the IP Interface."
    ::= { f3OspfIpInterfaceExtEntry 11 }
 
f3OspfIpInterfaceExtOspfAreaId OBJECT-TYPE
    SYNTAX      AreaID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Area ID with which this IP Interface is associated."
    ::= { f3OspfIpInterfaceExtEntry 12 }

f3OspfIpInterfaceExtPassiveEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The OSPF status for the IP Interface."
    DEFVAL { false }
    ::= { f3OspfIpInterfaceExtEntry 13 }

--
--  OSPF IP Management Tunnel Ext Table
--

f3OspfIpMgmtTunnelExtTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF F3OspfIpMgmtTunnelExtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of entries corresponding to OSPF Interface
            configuration purposes. This table extends ipManagementTunnelTable 
            from CM-IP-MIB."
    ::= { f3OspfConfigObjects 4 }

f3OspfIpMgmtTunnelExtEntry OBJECT-TYPE
    SYNTAX      F3OspfIpMgmtTunnelExtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the f3OspfIpMgmtTunnelExtTable."
    AUGMENTS { ipManagementTunnelEntry }
    ::= { f3OspfIpMgmtTunnelExtTable 1 }

F3OspfIpMgmtTunnelExtEntry ::= SEQUENCE {
    f3OspfIpMgmtTunnelExtStatus                     OspfState,
    f3OspfIpMgmtTunnelExtAreaId                     AreaID,
    f3OspfIpMgmtTunnelExtIfType                     INTEGER,
    f3OspfIpMgmtTunnelExtHelloInterval              HelloRange,
    f3OspfIpMgmtTunnelExtRtrDeadInterval            Integer32,
    f3OspfIpMgmtTunnelExtRetransInterval            Integer32,
    f3OspfIpMgmtTunnelExtRtrPriority                DesignatedRouterPriority,
    f3OspfIpMgmtTunnelExtCost                       Integer32,
    f3OspfIpMgmtTunnelExtAuthType                   OspfAuthenticationType,
    f3OspfIpMgmtTunnelExtAuthKey                    OCTET STRING,
    f3OspfIpMgmtTunnelExtOspfEnabled                TruthValue,
    f3OspfIpMgmtTunnelExtOspfAreaId                 AreaID,
    f3OspfIpMgmtTunnelExtPassiveEnabled             TruthValue
}
    
f3OspfIpMgmtTunnelExtStatus OBJECT-TYPE
    SYNTAX      OspfState  
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The OSPF admin status for the IP Management Tunnel."
    DEFVAL { enabled }
    ::= { f3OspfIpMgmtTunnelExtEntry 1 }
 
f3OspfIpMgmtTunnelExtAreaId OBJECT-TYPE
    SYNTAX      AreaID
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The Area ID with which this IP Management Tunnel is associated."
    DEFVAL { '00000000'H }
    ::= { f3OspfIpMgmtTunnelExtEntry 2 }
   
f3OspfIpMgmtTunnelExtIfType OBJECT-TYPE
    SYNTAX       INTEGER {
                    broadcast (1),
                    nbma (2),
                    pointToPoint (3),
                    pointToMultipoint (5)
                    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The OSPF interface type for the IP Management Tunnel."
    ::= { f3OspfIpMgmtTunnelExtEntry 3 }

f3OspfIpMgmtTunnelExtHelloInterval OBJECT-TYPE
    SYNTAX      HelloRange
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The number of seconds between OSPF Hello packets
        for the IP Management Tunnel."
    DEFVAL { 10 }
    ::= { f3OspfIpMgmtTunnelExtEntry 4 }
    
f3OspfIpMgmtTunnelExtRtrDeadInterval OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The number of seconds that must pass from the last received Hello 
        packet before a neighbor router is declared down."
    DEFVAL { 40 }
    ::= { f3OspfIpMgmtTunnelExtEntry 5 }
    
f3OspfIpMgmtTunnelExtRetransInterval OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    UNITS       "seconds"    
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The number of seconds for the Retransmit Timer Interval value for 
        the IP Interface. The value is used when retransmitting Database 
        Description and Link State Request packets."
    DEFVAL { 5 }
    ::= { f3OspfIpMgmtTunnelExtEntry 6 }
    
f3OspfIpMgmtTunnelExtRtrPriority OBJECT-TYPE
    SYNTAX      DesignatedRouterPriority  
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The OSPF router priority for the IP Management Tunnel.
        The router with the highest priority will be more eligible 
        to become Designated Router. Setting the value to 0 makes 
        the router ineligible to become the Designated Router."
    DEFVAL { 1 }        
    ::= { f3OspfIpMgmtTunnelExtEntry 7 }
    
f3OspfIpMgmtTunnelExtCost OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The cost associated with the IP Management Tunnel for use in the 
        Shortest Path calculations."
    ::= { f3OspfIpMgmtTunnelExtEntry 8 }
    
f3OspfIpMgmtTunnelExtAuthType OBJECT-TYPE
    SYNTAX      OspfAuthenticationType  
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The OSPF authentication type for the IP Management Tunnel.  This value 
        supersedes the authentication type defined for the Area."
    DEFVAL { none }
    ::= { f3OspfIpMgmtTunnelExtEntry 9 }
    
f3OspfIpMgmtTunnelExtAuthKey OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The OSPF authentication key for the IP Management Tunnel.  
        If the authentication type is Simple, the authentication key is 
        limited to 8 characters.  If the authentication type is MD5, the
        authentication key is up to 16 characters."
    DEFVAL { '0000000000000000'H }
    ::= { f3OspfIpMgmtTunnelExtEntry 10 }

f3OspfIpMgmtTunnelExtOspfEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The OSPF status for the Management Tunnel."
    ::= { f3OspfIpMgmtTunnelExtEntry 11 }
 
f3OspfIpMgmtTunnelExtOspfAreaId OBJECT-TYPE
    SYNTAX      AreaID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Area ID with which this Management Tunnel is associated."
    ::= { f3OspfIpMgmtTunnelExtEntry 12 }

f3OspfIpMgmtTunnelExtPassiveEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The OSPF Passive mode for the Management Tunnel."
    DEFVAL { false }
    ::= { f3OspfIpMgmtTunnelExtEntry 13 }


--
--  OSPF Neighbor Ext Table
--

f3OspfNbrExtTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF F3OspfNbrExtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "This table extends ospfNbrTable from OSPF-MIB."
    ::= { f3OspfConfigObjects 5 }

f3OspfNbrExtEntry OBJECT-TYPE
    SYNTAX      F3OspfNbrExtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the f3OspfNbrExtTable."
    AUGMENTS { ospfNbrEntry }
    ::= { f3OspfNbrExtTable 1 }

F3OspfNbrExtEntry ::= SEQUENCE {
    f3OspfNbrExtRole                     OspfRole
}
    
f3OspfNbrExtRole OBJECT-TYPE
    SYNTAX      OspfRole  
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The OSPF role for this neighbor router."
    ::= { f3OspfNbrExtEntry 1 }

--
--  OSPF Loopback IP Interface Ext Table
--

f3OspfLoopbackInterfaceExtTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF F3OspfLoopbackInterfaceExtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of entries corresponding to OSPF Interface
            configuration purposes. This table extends cmIpInterfaceTable 
            from CM-IP-MIB."
    ::= { f3OspfConfigObjects 6 }

f3OspfLoopbackInterfaceExtEntry OBJECT-TYPE
    SYNTAX      F3OspfLoopbackInterfaceExtEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the f3OspfLoopbackInterfaceExtTable."
    AUGMENTS { ipLoopbackInterfaceEntry }
    ::= { f3OspfLoopbackInterfaceExtTable 1 }

F3OspfLoopbackInterfaceExtEntry ::= SEQUENCE {
    f3OspfLoopbackInterfaceExtStatus    TruthValue,
    f3OspfLoopbackInterfaceExtAreaId    AreaID
}

f3OspfLoopbackInterfaceExtStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The OSPF admin status for the Loopback Interface."
    ::= { f3OspfLoopbackInterfaceExtEntry 1 }
 
f3OspfLoopbackInterfaceExtAreaId OBJECT-TYPE
    SYNTAX      AreaID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The Area ID with which this Loopback Interface is associated."
    ::= { f3OspfLoopbackInterfaceExtEntry 2 }

--
--  OSPF Area Interface List Table
--

f3OspfAreaInterfaceTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF F3OspfAreaInterfaceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A list of entries corresponding to Interfaces associated
             with an OSPF Area."
    ::= { f3OspfConfigObjects 7 }

f3OspfAreaInterfaceEntry OBJECT-TYPE
    SYNTAX      F3OspfAreaInterfaceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the f3OspfAreaInterfaceTable."
    INDEX { f3OspfAreaId, f3OspfAreaInterface }
    ::= { f3OspfAreaInterfaceTable 1 }

F3OspfAreaInterfaceEntry ::= SEQUENCE {
    f3OspfAreaInterface                         VariablePointer,
    f3OspfAreaInterfaceStorageType              StorageType,
    f3OspfAreaInterfaceRowStatus                RowStatus
}

f3OspfAreaInterface OBJECT-TYPE
    SYNTAX      VariablePointer
    MAX-ACCESS  not-accessible 
    STATUS      current
    DESCRIPTION
        "The interface associated with the OSPF area."
    ::= { f3OspfAreaInterfaceEntry 1}

f3OspfAreaInterfaceStorageType OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "The type of storage configured for this entry."
    ::= { f3OspfAreaInterfaceEntry 2 }

f3OspfAreaInterfaceRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "The status of this row.
          	An entry MUST NOT exist in the active state unless all
          	objects in the entry have an appropriate value, as described
          	in the description clause for each writable object.

          	The values of f3VrfTrafficIpIfMemberRowStatus supported are
          	createAndGo(4) and destroy(6).  All mandatory attributes
          	must be specified in a single SNMP SET request with
          	f3VrfTrafficIpIfMemberRowStatus value as createAndGo(4).
          	Upon successful row creation, this object has a
          	value of active(1).

          	The f3OspfAreaInterfaceRowStatus object may be modified if
          	the associated instance of this object is equal to active(1)."
    ::= { f3OspfAreaInterfaceEntry 3 }


--
-- Conformance
--
f3OspfCompliances OBJECT IDENTIFIER ::= {f3OspfConformance 1}
f3OspfGroups    OBJECT IDENTIFIER ::= {f3OspfConformance 2}

f3OspfCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "Describes the requirements for conformance to the F3-OSPF-MIB compilance."
    MODULE  -- this module
        MANDATORY-GROUPS {
              f3OspfRouterGroup, f3OspfAreaGroup,
              f3OspfIpInterfaceExtGroup, f3OspfIpMgmtTunnelExtGroup,
              f3OspfNbrExtGroup, f3OspfLoopbackInterfaceExtGroup,
              f3OspfAreaInterfaceGroup
        }
    ::= { f3OspfCompliances 1 }

f3OspfRouterGroup OBJECT-GROUP
    OBJECTS {
        f3OspfRouterMetricType,
        f3OspfRouterMetric,
        f3OspfRouterRedistributionType,
        f3OspfRouterNumAttachedAreas,
        f3OspfRouterAreaBdrRtrStatus,
        f3OspfRouterStorageType,
        f3OspfRouterRowStatus,
        f3OspfRouterRipRedistributionEnabled,
        f3OspfRouterRipMetricType,
        f3OspfRouterRipMetric,
        f3OspfRouterAsbrStatus
    }
    STATUS  current
    DESCRIPTION
             "A collection of objects used to manage the OSPF Router."
    ::= { f3OspfGroups 1 }

f3OspfAreaGroup OBJECT-GROUP
    OBJECTS {
        f3OspfAreaId,
        f3OspfAreaType,
        f3OspfAreaAuthType,
        f3OspfAreaDefaultCost,
        f3OspfAreaSpfRuns,
        f3OspfAreaLsaCount,
        f3OspfAreaStorageType,
        f3OspfAreaRowStatus,
        f3OspfAreaInterfaceList
    }
    STATUS  current
    DESCRIPTION
             "A collection of objects used to manage the OSPF Area."
    ::= { f3OspfGroups 2 }

f3OspfIpInterfaceExtGroup OBJECT-GROUP
    OBJECTS {
        f3OspfIpInterfaceExtStatus,
        f3OspfIpInterfaceExtAreaId,
        f3OspfIpInterfaceExtIfType,
        f3OspfIpInterfaceExtHelloInterval,
        f3OspfIpInterfaceExtRtrDeadInterval,
        f3OspfIpInterfaceExtRetransInterval,
        f3OspfIpInterfaceExtRtrPriority,
        f3OspfIpInterfaceExtCost,
        f3OspfIpInterfaceExtAuthType,
        f3OspfIpInterfaceExtAuthKey,
        f3OspfIpInterfaceExtOspfEnabled,
        f3OspfIpInterfaceExtOspfAreaId,
        f3OspfIpInterfaceExtPassiveEnabled
    }
    STATUS  current
    DESCRIPTION
             "A collection of objects used to manage OSPF configuration
              of IP Interface."
    ::= { f3OspfGroups 3 }

f3OspfIpMgmtTunnelExtGroup OBJECT-GROUP
    OBJECTS {
        f3OspfIpMgmtTunnelExtStatus,
        f3OspfIpMgmtTunnelExtAreaId,
        f3OspfIpMgmtTunnelExtIfType,
        f3OspfIpMgmtTunnelExtHelloInterval,
        f3OspfIpMgmtTunnelExtRtrDeadInterval,
        f3OspfIpMgmtTunnelExtRetransInterval,
        f3OspfIpMgmtTunnelExtRtrPriority,
        f3OspfIpMgmtTunnelExtCost,
        f3OspfIpMgmtTunnelExtAuthType,
        f3OspfIpMgmtTunnelExtAuthKey,
        f3OspfIpMgmtTunnelExtOspfEnabled,
        f3OspfIpMgmtTunnelExtOspfAreaId,
        f3OspfIpMgmtTunnelExtPassiveEnabled
    }
    STATUS  current
    DESCRIPTION
             "A collection of objects used to manage OSPF configuration
              of IP Management Tunnel."
    ::= { f3OspfGroups 4 }

f3OspfNbrExtGroup OBJECT-GROUP
    OBJECTS {
        f3OspfNbrExtRole
    }
    STATUS  current
    DESCRIPTION
             "A collection of objects used to manage OSPF configuration
              of OSPF Neighbor."
    ::= { f3OspfGroups 5 }

f3OspfLoopbackInterfaceExtGroup OBJECT-GROUP
    OBJECTS {
        f3OspfLoopbackInterfaceExtStatus,
        f3OspfLoopbackInterfaceExtAreaId
    }
    STATUS  current
    DESCRIPTION
             "A collection of objects used to manage OSPF configuration
              of IP loopback interface"
    ::= { f3OspfGroups 6 }

f3OspfAreaInterfaceGroup OBJECT-GROUP
    OBJECTS {
        f3OspfAreaInterface,
        f3OspfAreaInterfaceStorageType,
        f3OspfAreaInterfaceRowStatus
    }
    STATUS  current
    DESCRIPTION
             "A collection of objects used to manage configuration
              of OSPF area interfaces"
    ::= { f3OspfGroups 7 }

END