F3-PWE3-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
             FROM SNMPv2-CONF
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    IpAddress, Integer32, Unsigned32, Counter64
             FROM SNMPv2-SMI
    DisplayString, TruthValue, RowStatus, StorageType, VariablePointer,
    MacAddress, DateAndTime, TEXTUAL-CONVENTION
             FROM SNMPv2-TC
    neIndex, shelfIndex, slotIndex
             FROM  CM-ENTITY-MIB
    cmEthernetAccPortIndex, cmEthernetNetPortIndex
             FROM  CM-FACILITY-MIB
    IpVersion, CmPmIntervalType, CmPmBinAction, VlanId, VlanPriority
             FROM  CM-COMMON-MIB
    fsp150cm
             FROM  ADVA-MIB
    AdminState, OperationalState, SecondaryState, PerfCounter64, 
         IpPriorityMapMode FROM  CM-COMMON-MIB;

f3Pwe3MIB MODULE-IDENTITY
    LAST-UPDATED    "201204030000Z"
    ORGANIZATION    "ADVA Optical Networking"
    CONTACT-INFO
            "        Raghav Trivedi
                     ADVA Optical Networking, Inc.
                Tel: +1 972 759-1239
             E-mail: rtrivedi@advaoptical.com
             Postal: 2301 N. Greenville Ave. #300
                     Richardson, TX USA 75082"
    DESCRIPTION
            "This module provides the F3 Pseudo Wire definitions used by 
             the F3 (FSP150CM/CC) product lines.  
             Copyright (C) ADVA Optical Networking."
    REVISION        "201204030000Z"
    DESCRIPTION
         "
          Notes from release 201204030000Z
            (i)Initial version
         ." 
    ::= {fsp150cm 19}    

-- 
-- OID definitions
-- 
f3Pwe3ConfigObjects            OBJECT IDENTIFIER ::= {f3Pwe3MIB 1}
f3Pwe3PerformanceObjects       OBJECT IDENTIFIER ::= {f3Pwe3MIB 2}
f3Pwe3PerformanceNotifications OBJECT IDENTIFIER ::= {f3Pwe3MIB 3}
f3Pwe3Conformance              OBJECT IDENTIFIER ::= {f3Pwe3MIB 4}

-- 
-- Textual Conventions 
-- 
PWE3SatopDiscoveryType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
          "Enumerations for PWE3 SATop Discovery Type."
    SYNTAX   INTEGER {
               dynamic(1),
               static(2)
             }

PWE3SatopEncapsulationType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
          "Enumerations for PWE3 SATop Encapsulation Type."
    SYNTAX   INTEGER {
               vlan-one-mpls-label(1),
               vlan-two-mpls-label(2),
               novlan-two-mpls-label(3)
             }

PWE3SatopRTPTSUpdateFreqType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
          "Enumerations for PWE3 SATop RTP Update Frequency."
    SYNTAX   INTEGER {
               freq-8kHz (1),
               freq-16kHz (2),
               freq-32kHz (3),
               freq-64kHz (4),
               freq-128kHz (5),
               freq-256kHz (6),
               freq-512kHz (7),
               freq-1024kHz (8)
             }

PWE3SatopTransportMode ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
          "Enumerations for PWE3 SATop Transport Mode."
    SYNTAX   INTEGER {
               satop-e1 (1),
               satop-t1 (2),
               satop-octetalignt1 (3)
             }

MplsLabel ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
          "Definition of MPLS Label.  
           The bits in network order (left-to-right) are, 

           Label(20-bits):QOS(3-bits):Bottom-of-Stack(1-bit):TTL(8-bits)

           These constitute the 32-bit unsigned integer."
    SYNTAX   Unsigned32 

--
-- CONFIGURATION 
--

--
-- PWE3 Profiles
--
-- PWE3 Idle Pattern Profile
--
f3Pwe3IdlePatternProfileTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF F3Pwe3IdlePatternProfileEntry 
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "A list of entries corresponding to the PWE3 Idle Pattern 
        Profile entities."
    ::= { f3Pwe3ConfigObjects 1 }

f3Pwe3IdlePatternProfileEntry OBJECT-TYPE
    SYNTAX     F3Pwe3IdlePatternProfileEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
          "An entry containing information applicable to a particular
           PWE3 Idle Pattern Profile Entity.  These profiles are used
           by PWE3 SAToP entities."
    INDEX { f3Pwe3IdlePatternProfileIndex }
    ::= { f3Pwe3IdlePatternProfileTable 1 }


F3Pwe3IdlePatternProfileEntry ::= SEQUENCE {
    f3Pwe3IdlePatternProfileIndex  Integer32,
    f3Pwe3IdlePatternProfileByte   Unsigned32
}

f3Pwe3IdlePatternProfileIndex OBJECT-TYPE
    SYNTAX     Integer32
    MAX-ACCESS not-accessible 
    STATUS     current
    DESCRIPTION
         "Unique index value associated with the PWE3 Idle Pattern Profile."
     ::= { f3Pwe3IdlePatternProfileEntry 1 }

f3Pwe3IdlePatternProfileByte    OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "This object allows SNMP management entities to specify the 
           Idle Pattern Profile information."
     ::= { f3Pwe3IdlePatternProfileEntry 2 }

--
--
-- PWE3 Resync Profile 
--
f3Pwe3ResyncProfileTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF F3Pwe3ResyncProfileEntry 
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "A list of entries corresponding to the PWE3 Resync Profile entities."
    ::= { f3Pwe3ConfigObjects 2 }

f3Pwe3ResyncProfileEntry OBJECT-TYPE
    SYNTAX     F3Pwe3ResyncProfileEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
          "An entry containing information applicable to a particular
           PWE3 Resync Profile Entity.  These profiles are used
           by PWE3 SAToP entities."
    INDEX { f3Pwe3ResyncProfileIndex }
    ::= { f3Pwe3ResyncProfileTable 1 }


F3Pwe3ResyncProfileEntry ::= SEQUENCE {
    f3Pwe3ResyncProfileIndex            Integer32,
    f3Pwe3ResyncProfileIncreaseFactor   Unsigned32,
    f3Pwe3ResyncProfileDecreaseFactor   Unsigned32,
    f3Pwe3ResyncProfileResyncThreshold  Unsigned32
}

f3Pwe3ResyncProfileIndex OBJECT-TYPE
    SYNTAX     Integer32
    MAX-ACCESS not-accessible 
    STATUS     current
    DESCRIPTION
         "Unique index value associated with the PWE3 Resync Profile."
     ::= { f3Pwe3ResyncProfileEntry 1 }

f3Pwe3ResyncProfileIncreaseFactor    OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "This object allows SNMP management entities to specify the 
           PWE3 Resync Profile Increase Factor.  This is used to define
           the fill rate of the leaky bucket algorithm associated with the
           Resync mechanism."
     ::= { f3Pwe3ResyncProfileEntry 2 }

f3Pwe3ResyncProfileDecreaseFactor    OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "This object allows SNMP management entities to specify the 
           PWE3 Resync Profile Decrease Factor.  This is used to define
           the leak rate for the leaky bucket algorithm associated with
           the Resync mechanism."
     ::= { f3Pwe3ResyncProfileEntry 3 }

f3Pwe3ResyncProfileResyncThreshold    OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "This object allows SNMP management entities to specify the 
           PWE3 Resync Profile Resync Threshold.  This is the threshold value
           at which point the pseudo-wire connection is deemed out of 
           synchronization state."
     ::= { f3Pwe3ResyncProfileEntry 4 }

--
--
-- PWE3 Loopback Profile 
--
f3Pwe3LoopbackProfileTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF F3Pwe3LoopbackProfileEntry 
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "A list of entries corresponding to the PWE3 Loopback Profile entities."
    ::= { f3Pwe3ConfigObjects 3 }

f3Pwe3LoopbackProfileEntry OBJECT-TYPE
    SYNTAX     F3Pwe3LoopbackProfileEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
          "An entry containing information applicable to a particular
           PWE3 Loopback Profile Entity.  These profiles are used
           by PWE3 T1/E1 interfaces."
    INDEX { f3Pwe3LoopbackProfileIndex }
    ::= { f3Pwe3LoopbackProfileTable 1 }

F3Pwe3LoopbackProfileEntry ::= SEQUENCE {
    f3Pwe3LoopbackProfileIndex         Integer32,
    f3Pwe3LoopbackProfileLength        Unsigned32,
    f3Pwe3LoopbackProfilePattern       Unsigned32,
    f3Pwe3LoopbackProfileRepeatTime    Unsigned32,
    f3Pwe3LoopbackProfileClearLength   Unsigned32,
    f3Pwe3LoopbackProfileClearPattern  Unsigned32
}

f3Pwe3LoopbackProfileIndex OBJECT-TYPE
    SYNTAX     Integer32
    MAX-ACCESS not-accessible 
    STATUS     current
    DESCRIPTION
         "Unique index value associated with the PWE3 Loopback Profile."
     ::= { f3Pwe3LoopbackProfileEntry 1 }

f3Pwe3LoopbackProfileLength  OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "This object allows SNMP management entities to specify the 
           PWE3 Loopback Length."
     ::= { f3Pwe3LoopbackProfileEntry 2 }

f3Pwe3LoopbackProfilePattern  OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "This object allows SNMP management entities to specify the 
           PWE3 Loopback Pattern."
     ::= { f3Pwe3LoopbackProfileEntry 3 }

f3Pwe3LoopbackProfileRepeatTime  OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "This object allows SNMP management entities to specify the 
           PWE3 Loopback Profile Repeat Time (Duration)."
     ::= { f3Pwe3LoopbackProfileEntry 4 }

f3Pwe3LoopbackProfileClearLength  OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "This object allows SNMP management entities to specify the 
           Loopback PWE3 Clear Length."
     ::= { f3Pwe3LoopbackProfileEntry 5 }

f3Pwe3LoopbackProfileClearPattern  OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "This object allows SNMP management entities to specify the 
           PWE3 Loopback Clear Pattern."
     ::= { f3Pwe3LoopbackProfileEntry 6 }

--
--
-- PWE3 Loss Profile 
--
f3Pwe3LossProfileTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF F3Pwe3LossProfileEntry 
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "A list of entries corresponding to the PWE3 Loss Profile entities."
    ::= { f3Pwe3ConfigObjects 4 }

f3Pwe3LossProfileEntry OBJECT-TYPE
    SYNTAX     F3Pwe3LossProfileEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
          "An entry containing information applicable to a particular
           PWE3 Loss Profile Entity.  These profiles are used
           by PWE3 SAToP entities."
    INDEX { f3Pwe3LossProfileIndex }
    ::= { f3Pwe3LossProfileTable 1 }

F3Pwe3LossProfileEntry ::= SEQUENCE {
    f3Pwe3LossProfileIndex               Integer32,
    f3Pwe3LossProfileLossStateEnterTime  Unsigned32,
    f3Pwe3LossProfileLossStateExitTime   Unsigned32
}

f3Pwe3LossProfileIndex OBJECT-TYPE
    SYNTAX     Integer32
    MAX-ACCESS not-accessible 
    STATUS     current
    DESCRIPTION
         "Unique index value associated with the PWE3 Loss Profile."
     ::= { f3Pwe3LossProfileEntry 1 }

f3Pwe3LossProfileLossStateEnterTime    OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "This object allows SNMP management entities to specify the 
           holdoff time that will be applied prior to the SAToP 
           instance entering a Loss State."
     ::= { f3Pwe3LossProfileEntry 2 }

f3Pwe3LossProfileLossStateExitTime    OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "This object allows SNMP management entities to specify the 
           holdon time that will be applied when the conditon causing 
           the loss state clears."
     ::= { f3Pwe3LossProfileEntry 3 }

--
--
-- PWE3 AIS Stabilization Profile 
--
f3Pwe3AisStabilizationProfileTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF F3Pwe3AisStabilizationProfileEntry 
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "A list of entries corresponding to the PWE3 AisStabilization 
        Profile entities."
    ::= { f3Pwe3ConfigObjects 5 }

f3Pwe3AisStabilizationProfileEntry OBJECT-TYPE
    SYNTAX     F3Pwe3AisStabilizationProfileEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
          "An entry containing information applicable to a particular
           PWE3 AisStabilization Profile Entity.  These profiles are used
           by PWE3 SAToP entities."
    INDEX { f3Pwe3AisStabilizationProfileIndex }
    ::= { f3Pwe3AisStabilizationProfileTable 1 }

F3Pwe3AisStabilizationProfileEntry ::= SEQUENCE {
    f3Pwe3AisStabilizationProfileIndex      Integer32,
    f3Pwe3AisStabilizationProfileEnterTime  Unsigned32,
    f3Pwe3AisStabilizationProfileExitTime   Unsigned32
}

f3Pwe3AisStabilizationProfileIndex OBJECT-TYPE
    SYNTAX     Integer32
    MAX-ACCESS not-accessible 
    STATUS     current
    DESCRIPTION
         "Unique index value associated with the PWE3 AIS 
          Stabilization Profile."
     ::= { f3Pwe3AisStabilizationProfileEntry 1 }

f3Pwe3AisStabilizationProfileEnterTime    OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "This object allows SNMP management entities to specify the 
           time (in hundreds of milliseconds) that will be applied on a 
           LOS event, before the SAToP instance transmits all 1s pattern 
           downstream (AIS).  
           Range 0 to 3 seconds in 100 millisecond increments."
     ::= { f3Pwe3AisStabilizationProfileEntry 2 }

f3Pwe3AisStabilizationProfileExitTime    OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "This object allows SNMP management entities to specify the 
           holdon time that will be applied when leaving the AIS 
           Stabilization period.
           Range 0 to 3 seconds in 100 milliseconds increments 
           (e.g. parameter range is 0 to 30)."
     ::= { f3Pwe3AisStabilizationProfileEntry 3 }

--
-- SAToP (Structure Agnostic TDM over Packet) Table 
--
f3Pwe3SatopTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF F3Pwe3SatopEntry 
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
       "A list of entries corresponding to the PWE3 SAToP entities."
    ::= { f3Pwe3ConfigObjects 6 }

f3Pwe3SatopEntry OBJECT-TYPE
    SYNTAX     F3Pwe3SatopEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
          "An entry containing information applicable to a particular
           PWE3 SAToP Entity."
    INDEX { neIndex, shelfIndex, slotIndex, f3Pwe3SatopIndex }
    ::= { f3Pwe3SatopTable 1 }


F3Pwe3SatopEntry ::= SEQUENCE {
-- index related/alias
    f3Pwe3SatopIndex                    Integer32,
    f3Pwe3SatopAlias                    DisplayString,

-- state management
    f3Pwe3SatopAdminState               AdminState,
    f3Pwe3SatopOperationalState         OperationalState,
    f3Pwe3SatopSecondaryState           SecondaryState,

-- Associated TDM entity 
    f3Pwe3SatopTDMEntity                VariablePointer,  

-- Discovery type
    f3Pwe3SatopDiscoveryType            PWE3SatopDiscoveryType,

-- SATOP header  related
    f3Pwe3SatopRemoteIpAddress          IpAddress,
    f3Pwe3SatopRemoteMacAddress         MacAddress,
    f3Pwe3SatopEncapsulationType        PWE3SatopEncapsulationType,
    f3Pwe3SatopRTPEnabled               TruthValue,
    f3Pwe3SatopRTPUpdateFrequency       PWE3SatopRTPTSUpdateFreqType,
    f3Pwe3SatopControlWordEnabled       TruthValue,
    f3Pwe3SatopJitterBufferSize         Unsigned32,
    f3Pwe3SatopPayloadSize              Unsigned32,
    f3Pwe3SatopVlanId                   VlanId,
    f3Pwe3SatopVlanPriority             VlanPriority,
    f3Pwe3SatopRxMplsLabel1             MplsLabel,
    f3Pwe3SatopRxMplsLabel2             MplsLabel,
    f3Pwe3SatopTxMplsLabel1             MplsLabel,
    f3Pwe3SatopTxMplsLabel2             MplsLabel,

-- associated profiles 
    f3Pwe3SatopAisStabilizationProfile  VariablePointer,
    f3Pwe3SatopResyncProfile            VariablePointer,
    f3Pwe3SatopLossProfile              VariablePointer,
    f3Pwe3SatopTransportMode            PWE3SatopTransportMode,

-- creation/deletion
    f3Pwe3SatopStorageType              StorageType,
    f3Pwe3SatopRowStatus                RowStatus
}

f3Pwe3SatopIndex OBJECT-TYPE
    SYNTAX     Integer32
    MAX-ACCESS not-accessible 
    STATUS     current
    DESCRIPTION
         "Unique index value associated with the SAToP Entity."
     ::= { f3Pwe3SatopEntry 1 }

f3Pwe3SatopAlias    OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(0..256))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
         "This object allows SNMP management entities to provide an 
          alias to the PWE3 SAToP entity."
     ::= { f3Pwe3SatopEntry 2 }

f3Pwe3SatopAdminState OBJECT-TYPE
    SYNTAX      AdminState 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
          "This object represents the Administrative State of the PWE3 
           SAToP entity."
    ::= { f3Pwe3SatopEntry 3 }

f3Pwe3SatopOperationalState   OBJECT-TYPE
    SYNTAX      OperationalState 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
          "This object represents the Operational State of the PWE3 
           SAToP entity." 
    ::= { f3Pwe3SatopEntry 4 }

f3Pwe3SatopSecondaryState     OBJECT-TYPE
    SYNTAX      SecondaryState 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
           "This object represents the Secondary State of the PWE3 
            SAToP entity."
    ::= { f3Pwe3SatopEntry 5 }

f3Pwe3SatopTDMEntity     OBJECT-TYPE
    SYNTAX      VariablePointer 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "This object allows specification of the T1/E1 entity
            associated with the SAToP.  This is only used at
            SATop creation time. Result of get operation on this object
            will result with zeroDotZero since one Satop could have more
            then one associated TDM entity. Subsequently, the associated
            TDM entities are managed via f3Pwe3SatopTDMEntityTable.
           "
    ::= { f3Pwe3SatopEntry 6 }

f3Pwe3SatopDiscoveryType     OBJECT-TYPE
    SYNTAX      PWE3SatopDiscoveryType 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "This object allows ability to statically/dynamically 
            determine the MAC address of the remote IP Address 
            associated with the SAToP. In the case of static discovery
            type, f3Pwe3SatopRemoteMacAddress must be explicitly specified.
            In the case of dynamic discovery, the system will use
            ARP mechanism to obtain the remote Layer 2 MAC address." 
    ::= { f3Pwe3SatopEntry 7 }

f3Pwe3SatopRemoteIpAddress     OBJECT-TYPE
    SYNTAX      IpAddress 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "This object allows ability to specify the remote IP 
            Address. This is used in the PWE payload." 
    ::= { f3Pwe3SatopEntry 8 }

f3Pwe3SatopRemoteMacAddress     OBJECT-TYPE
    SYNTAX      MacAddress 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "This object allows ability to specify the remote Layer 2 
            MAC Address. This must be specified in case of
            f3Pwe3SatopDiscoveryType as static.  This is derived
            dynamically (via ARP) if f3Pwe3SatopDiscoveryType is dynamic,
            i.e. it does not have to be specified."
    ::= { f3Pwe3SatopEntry 9 }

f3Pwe3SatopEncapsulationType     OBJECT-TYPE
    SYNTAX      PWE3SatopEncapsulationType 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "This object allows ability to specify the encapsulation 
            type of the SATop.  It can be encapsulated with
            VLAN and single MPLS label(vlan-one-mpls-label), 
            VLAN and two MPLS labels (vlan-two-mpls-label),
            untagged and two MPLS labels (novlan-two-mpls-label)
           ."
    ::= { f3Pwe3SatopEntry 10 }

f3Pwe3SatopRTPEnabled     OBJECT-TYPE
    SYNTAX      TruthValue 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "This object enables/disables RTP header for this SATop instance." 
    ::= { f3Pwe3SatopEntry 11 }

f3Pwe3SatopRTPUpdateFrequency     OBJECT-TYPE
    SYNTAX      PWE3SatopRTPTSUpdateFreqType 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "When f3Pwe3SatopRTPEnabled is true, this object allows
            specification of the RTP clock update frequency." 
    ::= { f3Pwe3SatopEntry 12 }

f3Pwe3SatopControlWordEnabled     OBJECT-TYPE
    SYNTAX      TruthValue 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "This object is used for 3rd party interoperability, since
            earlier versions of PWE do not support control-word." 
    ::= { f3Pwe3SatopEntry 13 }

f3Pwe3SatopJitterBufferSize     OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "This object allows definition of size of the jitter buffer
            in microseconds for this SATop instance." 
    ::= { f3Pwe3SatopEntry 14 }

f3Pwe3SatopPayloadSize     OBJECT-TYPE
    SYNTAX      Unsigned32 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "This object allows specification of the SATop payload size." 
    ::= { f3Pwe3SatopEntry 15 }

f3Pwe3SatopVlanId     OBJECT-TYPE
    SYNTAX      VlanId 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "This object allows specification of the SATop VLAN Id.
            Applicable for vlan based encapsulation types." 
    ::= { f3Pwe3SatopEntry 16 }

f3Pwe3SatopVlanPriority     OBJECT-TYPE
    SYNTAX      VlanPriority 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "This object allows specification of the SATop VLAN Priority.
            Applicable for vlan based encapsulation types." 
    ::= { f3Pwe3SatopEntry 17 }

f3Pwe3SatopRxMplsLabel1     OBJECT-TYPE
    SYNTAX      MplsLabel 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "This object allows specification of the expected
            receive MPLS Label.  
            Applicable for single MPLS label encapsulation type." 
    ::= { f3Pwe3SatopEntry 18 }

f3Pwe3SatopRxMplsLabel2     OBJECT-TYPE
    SYNTAX      MplsLabel 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "This object allows specification of the expected
            receive MPLS Label.  
            Applicable for dual MPLS label encapsulation types." 
    ::= { f3Pwe3SatopEntry 19 }

f3Pwe3SatopTxMplsLabel1     OBJECT-TYPE
    SYNTAX      MplsLabel 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "This object allows specification of the transmitted
            MPLS Label, used for multiplexing.  
            Applicable for single MPLS label encapsulation type." 
    ::= { f3Pwe3SatopEntry 20 }

f3Pwe3SatopTxMplsLabel2     OBJECT-TYPE
    SYNTAX      MplsLabel 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "This object allows specification of the transmitted 
            MPLS Label, used for multiplexing.  
            Applicable for dual MPLS label encapsulation type." 
    ::= { f3Pwe3SatopEntry 21 }

f3Pwe3SatopAisStabilizationProfile     OBJECT-TYPE
    SYNTAX      VariablePointer 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "This object allows specification of the AIS stabilization 
            Profile object. If no profile is associated, this value should be
            0.0." 
    ::= { f3Pwe3SatopEntry 22 }

f3Pwe3SatopResyncProfile     OBJECT-TYPE
    SYNTAX      VariablePointer 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "This object allows specification of the Resync 
            Profile object.  If no profile is associated, this value
            should be 0.0." 
    ::= { f3Pwe3SatopEntry 23 }

f3Pwe3SatopLossProfile     OBJECT-TYPE
    SYNTAX      VariablePointer 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "This object allows specification of the Loss 
            Profile object.  If no profile is associated, this value
            should be 0.0." 
    ::= { f3Pwe3SatopEntry 24 }

f3Pwe3SatopTransportMode     OBJECT-TYPE
    SYNTAX      PWE3SatopTransportMode 
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "This object allows specification of the SATop transport mode." 
    ::= { f3Pwe3SatopEntry 25 }

f3Pwe3SatopStorageType OBJECT-TYPE
    SYNTAX     StorageType
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The type of storage configured for this entry."
    ::= { f3Pwe3SatopEntry 26 }

f3Pwe3SatopRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "The status of this row.  An entry MUST NOT exist in the 
            active state unless all objects in the entry have an 
            appropriate value, as described
            in the description clause for each writable object.

            The values of f3Pwe3SatopRowStatus supported are
            createAndGo(4) and destroy(6).  All mandatory attributes
            must be specified in a single SNMP SET request with
            f3Pwe3SatopRowStatus value as createAndGo(4).
            Upon successful row creation, this object has a
            value of active(1).

            The f3Pwe3SatopRowStatus object may be modified if
            the associated instance of this object is equal to active(1)."
    ::= { f3Pwe3SatopEntry 27 }


--
-- PWE3 SATop TDM Entities Table 
--
f3Pwe3SatopTDMEntitiesTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF F3Pwe3SatopTDMEntitiesEntry 
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
         "A list of entries corresponding to the PWE3 SATop TDM entities 
          ."
    ::= { f3Pwe3ConfigObjects 7 }

f3Pwe3SatopTDMEntitiesEntry OBJECT-TYPE
    SYNTAX     F3Pwe3SatopTDMEntitiesEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
          "An entry containing information applicable to a particular
           PWE3 SATop TDM entity."
    INDEX { neIndex, shelfIndex, slotIndex, f3Pwe3SatopIndex, f3Pwe3SatopTDMEntityIndex}
    ::= { f3Pwe3SatopTDMEntitiesTable 1 }

F3Pwe3SatopTDMEntitiesEntry ::= SEQUENCE {
    f3Pwe3SatopTDMEntityIndex            Integer32,

    f3Pwe3SatopTDMEntityObject           VariablePointer,

    f3Pwe3SatopTDMEntityStorageType      StorageType,
    f3Pwe3SatopTDMEntityRowStatus        RowStatus
}

f3Pwe3SatopTDMEntityIndex OBJECT-TYPE
    SYNTAX     Integer32
    MAX-ACCESS not-accessible 
    STATUS     current
    DESCRIPTION
         "Unique index value associated with the PWE3 SATOP TDM Entity."
     ::= { f3Pwe3SatopTDMEntitiesEntry 1 }

f3Pwe3SatopTDMEntityObject OBJECT-TYPE
    SYNTAX     VariablePointer 
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
         "This object points to the PWE3 SATOP TDM Entity.  This is
          OID of the actual T1/E1 interface."
     ::= { f3Pwe3SatopTDMEntitiesEntry 2 }

f3Pwe3SatopTDMEntityStorageType OBJECT-TYPE
    SYNTAX     StorageType
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The type of storage configured for this entry."
    ::= { f3Pwe3SatopTDMEntitiesEntry 3 }

f3Pwe3SatopTDMEntityRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
           "The status of this row.  An entry MUST NOT exist in the 
            active state unless all objects in the entry have an 
            appropriate value, as described
            in the description clause for each writable object.

            The values of f3Pwe3SatopTDMEntityRowStatus supported are
            createAndGo(4) and destroy(6).  All mandatory attributes
            must be specified in a single SNMP SET request with
            f3Pwe3SatopTDMEntityRowStatus value as createAndGo(4).
            Upon successful row creation, this object has a
            value of active(1).

            The f3Pwe3SatopTDMEntityRowStatus object may be modified if
            the associated instance of this object is equal to active(1)."
    ::= { f3Pwe3SatopTDMEntitiesEntry 4 }

--
-- Performance Tables
--
-- PWE3 SATOP Stats (Current) Table
--
f3Pwe3SatopStatsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF F3Pwe3SatopStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "The PWE3 SATop Current data."
    ::= { f3Pwe3PerformanceObjects 1 }

f3Pwe3SatopStatsEntry OBJECT-TYPE
    SYNTAX      F3Pwe3SatopStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the f3Pwe3SatopStatsTable."
    INDEX { neIndex, shelfIndex, slotIndex, f3Pwe3SatopIndex, f3Pwe3SatopStatsIndex }
    ::= { f3Pwe3SatopStatsTable 1 }

F3Pwe3SatopStatsEntry ::= SEQUENCE {
    f3Pwe3SatopStatsIndex                 Integer32,
    f3Pwe3SatopStatsIntervalType          CmPmIntervalType,
    f3Pwe3SatopStatsValid                 TruthValue,
    f3Pwe3SatopStatsAction                CmPmBinAction,
    f3Pwe3SatopStatsESs                   PerfCounter64,
    f3Pwe3SatopStatsSESs                  PerfCounter64,
    f3Pwe3SatopStatsEBs                   PerfCounter64,
    f3Pwe3SatopStatsResyncs               PerfCounter64,
    f3Pwe3SatopStatsMaxJitter             Unsigned32,
    f3Pwe3SatopStatsFramesTx              PerfCounter64,
    f3Pwe3SatopStatsPayloadOctetsTx       PerfCounter64,
    f3Pwe3SatopStatsFramesRx              PerfCounter64,
    f3Pwe3SatopStatsPayloadOctetsRx       PerfCounter64,
    f3Pwe3SatopStatsOutOfSeqFramesRx      PerfCounter64,
    f3Pwe3SatopStatsLostFrames            PerfCounter64,
    f3Pwe3SatopStatsLostFramesStateTrans  PerfCounter64,
    f3Pwe3SatopStatsMalformedFramesRx     PerfCounter64,
    f3Pwe3SatopStatsJitterBufferLateFrames PerfCounter64
}

f3Pwe3SatopStatsIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    MAX-ACCESS  not-accessible 
    STATUS      current
    DESCRIPTION
            "An index of the SATop current bin."
    ::= { f3Pwe3SatopStatsEntry 1 }

f3Pwe3SatopStatsIntervalType OBJECT-TYPE
    SYNTAX      CmPmIntervalType
    MAX-ACCESS  read-only 
    STATUS      current
    DESCRIPTION
            "Indicates the type of collection, i.e. whether it is
             15 Min, 1 Day."
    ::= { f3Pwe3SatopStatsEntry 2 }

f3Pwe3SatopStatsValid OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Indicates the validity of the bin."
    ::= { f3Pwe3SatopStatsEntry 3 }

f3Pwe3SatopStatsAction OBJECT-TYPE
    SYNTAX      CmPmBinAction
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "Allows the Manager to clear the bin."
    ::= { f3Pwe3SatopStatsEntry 4 }


f3Pwe3SatopStatsESs OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
            "The counter associated with the number 
            of Errored Seconds encountered by the 
            SATop in the current bin."
     ::= { f3Pwe3SatopStatsEntry 5 }

f3Pwe3SatopStatsSESs OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Severely Errored Seconds encountered by the 
         SATop in the current bin."
     ::= { f3Pwe3SatopStatsEntry 6 }

f3Pwe3SatopStatsEBs OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Errored Blocsk encountered by the SATop
         in the current bin."
     ::= { f3Pwe3SatopStatsEntry 7 }

f3Pwe3SatopStatsResyncs OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Resync count events encountered by the 
         SATop in the current bin."
     ::= { f3Pwe3SatopStatsEntry 8 }

f3Pwe3SatopStatsMaxJitter OBJECT-TYPE
     SYNTAX     Unsigned32
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The maximum absolute jitter on SATop in the current bin." 
     ::= { f3Pwe3SatopStatsEntry 9 }

f3Pwe3SatopStatsFramesTx OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Frames Transmitted in the current bin." 
     ::= { f3Pwe3SatopStatsEntry 10 }

f3Pwe3SatopStatsPayloadOctetsTx OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Payload Octets Transmitted in the current bin." 
     ::= { f3Pwe3SatopStatsEntry 11 }

f3Pwe3SatopStatsFramesRx OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Frames Received in the current bin." 
     ::= { f3Pwe3SatopStatsEntry 12 }

f3Pwe3SatopStatsPayloadOctetsRx OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Payload Octets Received in the current bin." 
     ::= { f3Pwe3SatopStatsEntry 13 }

f3Pwe3SatopStatsOutOfSeqFramesRx OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Out of Sequence Frames Received in the current bin." 
     ::= { f3Pwe3SatopStatsEntry 14 }

f3Pwe3SatopStatsLostFrames OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Lost Frames detected in the current bin." 
     ::= { f3Pwe3SatopStatsEntry 15 }

f3Pwe3SatopStatsLostFramesStateTrans OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of transitions to
         Lost Frame State detected in the current bin." 
     ::= { f3Pwe3SatopStatsEntry 16 }

f3Pwe3SatopStatsMalformedFramesRx OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Malformed Frames received in the current bin." 
     ::= { f3Pwe3SatopStatsEntry 17 }

f3Pwe3SatopStatsJitterBufferLateFrames OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Jitter Buffer Late Frames in the current bin." 
     ::= { f3Pwe3SatopStatsEntry 18 }

--
-- PWE3 SATOP History Table
--
f3Pwe3SatopHistoryTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF F3Pwe3SatopHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "The PWE3 SATop History data."
    ::= { f3Pwe3PerformanceObjects 2 }

f3Pwe3SatopHistoryEntry OBJECT-TYPE
    SYNTAX      F3Pwe3SatopHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the f3Pwe3SatopHistoryTable."
    INDEX { neIndex, shelfIndex, slotIndex, f3Pwe3SatopIndex, f3Pwe3SatopStatsIndex, 
            f3Pwe3SatopHistoryIndex }
    ::= { f3Pwe3SatopHistoryTable 1 }

F3Pwe3SatopHistoryEntry ::= SEQUENCE {
    f3Pwe3SatopHistoryIndex                 Integer32,
    f3Pwe3SatopHistoryTime                  DateAndTime,
    f3Pwe3SatopHistoryValid                 TruthValue,
    f3Pwe3SatopHistoryAction                CmPmBinAction,
    f3Pwe3SatopHistoryESs                   PerfCounter64,
    f3Pwe3SatopHistorySESs                  PerfCounter64,
    f3Pwe3SatopHistoryEBs                   PerfCounter64,
    f3Pwe3SatopHistoryResyncs               PerfCounter64,
    f3Pwe3SatopHistoryMaxJitter             Unsigned32,
    f3Pwe3SatopHistoryFramesTx              PerfCounter64,
    f3Pwe3SatopHistoryPayloadOctetsTx       PerfCounter64,
    f3Pwe3SatopHistoryFramesRx              PerfCounter64,
    f3Pwe3SatopHistoryPayloadOctetsRx       PerfCounter64,
    f3Pwe3SatopHistoryOutOfSeqFramesRx      PerfCounter64,
    f3Pwe3SatopHistoryLostFrames            PerfCounter64,
    f3Pwe3SatopHistoryLostFramesStateTrans  PerfCounter64,
    f3Pwe3SatopHistoryMalformedFramesRx     PerfCounter64,
    f3Pwe3SatopHistoryJitterBufferLateFrames PerfCounter64
}

f3Pwe3SatopHistoryIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    MAX-ACCESS  not-accessible 
    STATUS      current
    DESCRIPTION
            "An index of the SATop current bin."
    ::= { f3Pwe3SatopHistoryEntry 1 }

f3Pwe3SatopHistoryTime OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only 
    STATUS      current
    DESCRIPTION
            "Indicates the time of history bin creation."
    ::= { f3Pwe3SatopHistoryEntry 2 }

f3Pwe3SatopHistoryValid OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "Indicates the validity of the bin."
    ::= { f3Pwe3SatopHistoryEntry 3 }

f3Pwe3SatopHistoryAction OBJECT-TYPE
    SYNTAX      CmPmBinAction
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "Allows the Manager to clear the bin."
    ::= { f3Pwe3SatopHistoryEntry 4 }

f3Pwe3SatopHistoryESs OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
            "The counter associated with the number 
            of Errored Seconds encountered by the 
            SATop in the current bin."
     ::= { f3Pwe3SatopHistoryEntry 5 }

f3Pwe3SatopHistorySESs OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Severely Errored Seconds encountered by the 
         SATop in the current bin."
     ::= { f3Pwe3SatopHistoryEntry 6 }

f3Pwe3SatopHistoryEBs OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Errored Blocsk encountered by the SATop
         in the current bin."
     ::= { f3Pwe3SatopHistoryEntry 7 }

f3Pwe3SatopHistoryResyncs OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Resync count events encountered by the 
         SATop in the current bin."
     ::= { f3Pwe3SatopHistoryEntry 8 }

f3Pwe3SatopHistoryMaxJitter OBJECT-TYPE
     SYNTAX     Unsigned32
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The maximum absolute jitter on SATop in the current bin." 
     ::= { f3Pwe3SatopHistoryEntry 9 }

f3Pwe3SatopHistoryFramesTx OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Frames Transmitted in the current bin." 
     ::= { f3Pwe3SatopHistoryEntry 10 }

f3Pwe3SatopHistoryPayloadOctetsTx OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Payload Octets Transmitted in the current bin." 
     ::= { f3Pwe3SatopHistoryEntry 11 }

f3Pwe3SatopHistoryFramesRx OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Frames Received in the current bin." 
     ::= { f3Pwe3SatopHistoryEntry 12 }

f3Pwe3SatopHistoryPayloadOctetsRx OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Payload Octets Received in the current bin." 
     ::= { f3Pwe3SatopHistoryEntry 13 }

f3Pwe3SatopHistoryOutOfSeqFramesRx OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Out of Sequence Frames Received in the current bin." 
     ::= { f3Pwe3SatopHistoryEntry 14 }

f3Pwe3SatopHistoryLostFrames OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Lost Frames detected in the current bin." 
     ::= { f3Pwe3SatopHistoryEntry 15 }

f3Pwe3SatopHistoryLostFramesStateTrans OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of transitions to
         Lost Frame State detected in the current bin." 
     ::= { f3Pwe3SatopHistoryEntry 16 }

f3Pwe3SatopHistoryMalformedFramesRx OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Malformed Frames received in the current bin." 
     ::= { f3Pwe3SatopHistoryEntry 17 }

f3Pwe3SatopHistoryJitterBufferLateFrames OBJECT-TYPE
     SYNTAX     PerfCounter64
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The counter associated with the number of 
         Jitter Buffer Overruns in the current bin." 
     ::= { f3Pwe3SatopHistoryEntry 18 }

--
-- PWE3 SATop Threshold Table
--
f3Pwe3SatopThresholdTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF F3Pwe3SatopThresholdEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A table of entries that allow manageability of SATop 
             Thresholds."
    ::= { f3Pwe3PerformanceObjects 3 }

f3Pwe3SatopThresholdEntry OBJECT-TYPE
    SYNTAX      F3Pwe3SatopThresholdEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "A conceptual row in the f3Pwe3SatopThresholdTable."
    INDEX {  neIndex, shelfIndex, slotIndex, f3Pwe3SatopIndex, f3Pwe3SatopStatsIndex, 
            f3Pwe3SatopThresholdIndex }
    ::= { f3Pwe3SatopThresholdTable 1 }

F3Pwe3SatopThresholdEntry ::= SEQUENCE {
    f3Pwe3SatopThresholdIndex       Integer32,
    f3Pwe3SatopThresholdInterval    CmPmIntervalType,
    f3Pwe3SatopThresholdVariable    VariablePointer,
    f3Pwe3SatopThresholdValueLo     Unsigned32,
    f3Pwe3SatopThresholdValueHi     Unsigned32,
    f3Pwe3SatopThresholdMonValue    Counter64
}

f3Pwe3SatopThresholdIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS  not-accessible 
    STATUS     current
    DESCRIPTION
        "An index that uniquely identifies an entry in the
        f3Pwe3SatopThresholdTable."
    ::= { f3Pwe3SatopThresholdEntry 1 }

f3Pwe3SatopThresholdInterval OBJECT-TYPE
    SYNTAX     CmPmIntervalType
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The interval over which monitored value is
        sampled and compared with the specified threshold."
    ::= { f3Pwe3SatopThresholdEntry 2 }

f3Pwe3SatopThresholdVariable OBJECT-TYPE
    SYNTAX     VariablePointer
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The object identifier of the particular variable to be
        sampled."
    ::= { f3Pwe3SatopThresholdEntry 3 }

f3Pwe3SatopThresholdValueLo OBJECT-TYPE
    SYNTAX     Unsigned32
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Lower 32 bits of the threshold value."
    ::= { f3Pwe3SatopThresholdEntry 4 }

f3Pwe3SatopThresholdValueHi OBJECT-TYPE
    SYNTAX     Unsigned32
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Higher 32 bits of the threshold value."
    ::= { f3Pwe3SatopThresholdEntry 5 }

f3Pwe3SatopThresholdMonValue OBJECT-TYPE
    SYNTAX     Counter64
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "Monitored value corresponding to f3Pwe3SatopThresholdVariable."
    ::= { f3Pwe3SatopThresholdEntry 6 }

---
---Notifications
---
f3Pwe3SatopThresholdCrossingAlert NOTIFICATION-TYPE
    OBJECTS {
        f3Pwe3SatopThresholdIndex,
        f3Pwe3SatopThresholdInterval,
        f3Pwe3SatopThresholdVariable,
        f3Pwe3SatopThresholdValueLo,
        f3Pwe3SatopThresholdValueHi,
        f3Pwe3SatopThresholdMonValue
    }
    STATUS  current
    DESCRIPTION
            "This trap is sent each time a threshold on a PM condition
             on an PWE3 SATop is crossed."
  ::= { f3Pwe3PerformanceNotifications 1 }

--
-- CONFORMANCE
--
f3Pwe3Compliances OBJECT IDENTIFIER ::= {f3Pwe3Conformance 1}
f3Pwe3Groups      OBJECT IDENTIFIER ::= {f3Pwe3Conformance 2}

f3Pwe3Compliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "Describes the requirements for conformance to the F3 PWE3
             group."
    MODULE  -- this module
        MANDATORY-GROUPS {
              f3Pwe3ObjectGroup, f3Pwe3PerfObjectGroup, f3Pwe3PerfNotifGroup
        }
    ::= { f3Pwe3Compliances 1 }

f3Pwe3ObjectGroup OBJECT-GROUP
    OBJECTS {
        f3Pwe3IdlePatternProfileIndex, f3Pwe3IdlePatternProfileByte, 
        f3Pwe3ResyncProfileIndex, f3Pwe3ResyncProfileIncreaseFactor,
        f3Pwe3ResyncProfileDecreaseFactor, f3Pwe3ResyncProfileResyncThreshold,
        f3Pwe3LoopbackProfileIndex, f3Pwe3LoopbackProfileLength,
        f3Pwe3LoopbackProfilePattern, f3Pwe3LoopbackProfileRepeatTime,
        f3Pwe3LoopbackProfileClearLength, f3Pwe3LoopbackProfileClearPattern, 
        f3Pwe3LossProfileIndex, f3Pwe3LossProfileLossStateEnterTime,
        f3Pwe3LossProfileLossStateExitTime,
        f3Pwe3AisStabilizationProfileIndex, 
        f3Pwe3AisStabilizationProfileEnterTime,
        f3Pwe3AisStabilizationProfileExitTime,

        f3Pwe3SatopIndex, f3Pwe3SatopAlias,
        f3Pwe3SatopAdminState, f3Pwe3SatopOperationalState,
        f3Pwe3SatopSecondaryState, f3Pwe3SatopTDMEntity,  
        f3Pwe3SatopDiscoveryType, f3Pwe3SatopRemoteIpAddress,
        f3Pwe3SatopRemoteMacAddress, f3Pwe3SatopEncapsulationType,
        f3Pwe3SatopRTPEnabled, f3Pwe3SatopRTPUpdateFrequency,
        f3Pwe3SatopControlWordEnabled, f3Pwe3SatopJitterBufferSize,
        f3Pwe3SatopPayloadSize, f3Pwe3SatopVlanId, f3Pwe3SatopVlanPriority,
        f3Pwe3SatopRxMplsLabel1, f3Pwe3SatopRxMplsLabel2,
        f3Pwe3SatopTxMplsLabel1, f3Pwe3SatopTxMplsLabel2,
        f3Pwe3SatopAisStabilizationProfile, f3Pwe3SatopResyncProfile,
        f3Pwe3SatopLossProfile, f3Pwe3SatopTransportMode,
        f3Pwe3SatopStorageType, f3Pwe3SatopRowStatus,

        f3Pwe3SatopTDMEntityIndex, f3Pwe3SatopTDMEntityObject, 
        f3Pwe3SatopTDMEntityStorageType, f3Pwe3SatopTDMEntityRowStatus
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects used to manage the F3 PWE3 Configuration data."
    ::= { f3Pwe3Groups 1 }

f3Pwe3PerfObjectGroup OBJECT-GROUP
    OBJECTS {
        f3Pwe3SatopStatsIndex, f3Pwe3SatopStatsIntervalType,
        f3Pwe3SatopStatsValid, f3Pwe3SatopStatsAction,
        f3Pwe3SatopStatsESs, f3Pwe3SatopStatsSESs,
        f3Pwe3SatopStatsEBs,
        f3Pwe3SatopStatsResyncs, f3Pwe3SatopStatsMaxJitter,
        f3Pwe3SatopStatsFramesTx, f3Pwe3SatopStatsPayloadOctetsTx,
        f3Pwe3SatopStatsFramesRx, f3Pwe3SatopStatsPayloadOctetsRx,
        f3Pwe3SatopStatsOutOfSeqFramesRx, f3Pwe3SatopStatsLostFrames,
        f3Pwe3SatopStatsLostFramesStateTrans, 
        f3Pwe3SatopStatsMalformedFramesRx, 
        f3Pwe3SatopStatsJitterBufferLateFrames, 

        f3Pwe3SatopHistoryIndex, f3Pwe3SatopHistoryTime,
        f3Pwe3SatopHistoryValid, f3Pwe3SatopHistoryAction,
        f3Pwe3SatopHistoryESs, f3Pwe3SatopHistorySESs,
        f3Pwe3SatopHistoryEBs,
        f3Pwe3SatopHistoryResyncs, f3Pwe3SatopHistoryMaxJitter,
        f3Pwe3SatopHistoryFramesTx, f3Pwe3SatopHistoryPayloadOctetsTx,
        f3Pwe3SatopHistoryFramesRx, f3Pwe3SatopHistoryPayloadOctetsRx,
        f3Pwe3SatopHistoryOutOfSeqFramesRx, f3Pwe3SatopHistoryLostFrames,
        f3Pwe3SatopHistoryLostFramesStateTrans, 
        f3Pwe3SatopHistoryMalformedFramesRx, 
        f3Pwe3SatopHistoryJitterBufferLateFrames,

        f3Pwe3SatopThresholdIndex, f3Pwe3SatopThresholdInterval,
        f3Pwe3SatopThresholdVariable, f3Pwe3SatopThresholdValueLo,
        f3Pwe3SatopThresholdValueHi, f3Pwe3SatopThresholdMonValue
    }
    STATUS  current
    DESCRIPTION
        "A collection of objects used to manage the F3 PWE3 Performance data."
    ::= { f3Pwe3Groups 2 }

f3Pwe3PerfNotifGroup NOTIFICATION-GROUP
    NOTIFICATIONS {
        f3Pwe3SatopThresholdCrossingAlert
    }
    STATUS  current
    DESCRIPTION
         "A collection of notifications related to F3 PWE3 Threshold Crossing 
          Alerts."
    ::= { f3Pwe3Groups 3 }
END