--
-- Copyright (c) 2006-2013. Aerohive Netowrks, Inc
-- All rights reserved.

AH-INTERFACE-MIB DEFINITIONS ::= BEGIN

--
-- Imports
--

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE, IpAddress
		FROM SNMPv2-SMI
	TruthValue 
	        FROM SNMPv2-TC
	ahAPInterface, AhString, AhNodeID, AhInterfaceMode, AhInterfaceType, AhMACProtocol
		FROM AH-SMI-MIB
	ifIndex, ifEntry
		FROM IF-MIB;

ahInterface MODULE-IDENTITY
         LAST-UPDATED  "201608310000Z"  --  Aug 31, 2016
         ORGANIZATION  "Aerohive Networks, Inc"
         CONTACT-INFO  "info@aerohive.com
                        1011 McCarthy Boulevard
                        
                        Milpitas, CA 95035"
         DESCRIPTION   "This module contains the MIB definition of 
			interface related information."
	 
	 ::=  {  ahAPInterface  1  }



AhAuthenticationMethod ::= TEXTUAL-CONVENTION
   STATUS        current
   DESCRIPTION   "Authentication method supported within Aerohive AP"
   SYNTAX        INTEGER {
   	                   cwp          (0), 
	                   open         (1), 
	                   wep-open     (2),                   
	                   wep-shared   (3),  
	                   wpa-psk      (4),
	                   wpa2-psk     (5),
	                   wpa-8021x    (6),
	                   wpa2-8021X   (7),                  
	                   wpa-auto-psk   (8),
	                   wpa-auto-8021x (9),
	                   dynamic-wep	(10)                
                 }

AhEncrytionMethod ::= TEXTUAL-CONVENTION
   STATUS        current
   DESCRIPTION   "Encryption method supported within Aerohive AP"
   SYNTAX        INTEGER {
                   AES        (0), 
                   TKIP       (1),
                   WEP        (2),
                   Non        (3)
                 }


--
-- Aerohive Extension to ifTable
--         interfaceName
--         SSIDName
--         interfaceMode
-- 

ahXIfTable	OBJECT-TYPE
	SYNTAX      SEQUENCE  OF  AhXIfEntry
	MAX-ACCESS  not-accessible
	STATUS      current
	DESCRIPTION "Table of all the Interface/SSID info 
			not covered by the rfc 2863"
	::=  {  ahInterface  1  }

ahXIfEntry	OBJECT-TYPE
	SYNTAX		AhXIfEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Individual entry of Interface/SSID table"
	AUGMENTS	{ ifEntry }
	::=  {  ahXIfTable  1  }

AhXIfEntry  ::=  SEQUENCE {
	ahIfName	AhString,
	ahSSIDName      AhString,
	ahIfPromiscuous TruthValue,
	ahIfType	AhInterfaceType,
	ahIfMode	AhInterfaceMode,
	ahIfConfMode	AhInterfaceMode
	}


ahIfName OBJECT-TYPE	
        SYNTAX	    AhString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "Name - uniquely identifies an AP Interface."
	::=  {  ahXIfEntry  1  }


ahSSIDName OBJECT-TYPE	
        SYNTAX	    AhString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "Name - identifies a wireless interface with Access mode.
			If the interface is not a wireless interface with Access mode, the 
			SSIDName should be set N/A"
	::=  {  ahXIfEntry  2  }

ahIfPromiscuous OBJECT-TYPE	
        SYNTAX	    TruthValue
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "Indicates whether an interface is in promiscuous 
			mode or not."
	::=  {  ahXIfEntry  3  }

ahIfType OBJECT-TYPE	
        SYNTAX	    AhInterfaceType
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "Indicates whether an interface is a physical 
			or virtual one."
	::=  {  ahXIfEntry  4  }

ahIfMode OBJECT-TYPE	
        SYNTAX	    AhInterfaceMode
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "Indicates whether an interface is used for Access
			or Backhaul currently."
	::=  {  ahXIfEntry  5  }

ahIfConfMode OBJECT-TYPE	
        SYNTAX	    AhInterfaceMode
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "Indicates whether an interface is configured for Access
			or Backhaul."
	::=  {  ahXIfEntry  6  }

--
-- AssociationTable
--         ClientMac
--         RSSI
--         linkUpTime
--
-- Association are attached to wireless interface with Access mode only
--

ahAssociationTable	OBJECT-TYPE
	SYNTAX      SEQUENCE  OF  AhAssociationEntry
	MAX-ACCESS  not-accessible
	STATUS      current
	DESCRIPTION "Table of directly connected APs"
	::=  {  ahInterface  2  }

ahAssociationEntry	OBJECT-TYPE
	SYNTAX		AhAssociationEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Individual entry of client table"
	INDEX		{  ifIndex, ahClientMac }
	::=  {  ahAssociationTable  1  }

AhAssociationEntry  ::=  SEQUENCE {
	ahClientMac						AhNodeID,
	ahClientIP						IpAddress,
	ahClientHostname				AhString,
	ahClientRSSI					Integer32,
	ahClientLinkUptime				Counter32,
	ahClientCWPUsed					TruthValue,
   	ahClientAuthMethod      		AhAuthenticationMethod,
  	ahClientEncryptionMethod 		AhEncrytionMethod,
  	ahClientMACProtocol     		AhMACProtocol,
  	ahClientSSID            		AhString,
  	ahClientVLAN            		Integer32,
  	ahClientUserProfId      		Integer32,
  	ahClientChannel         		Integer32,
 	ahClientLastTxRate      		Integer32,
	ahClientUsername				AhString,
 	ahClientRxDataFrames    		Counter32,
 	ahClientRxDataOctets    		Counter32,
 	ahClientRxMgtFrames				Counter32,
  	ahClientRxUnicastFrames			Counter32,
  	ahClientRxMICFailures			Counter32,
  	ahClientLastRxRate      		Integer32,        
  	ahClientTxDataFrames			Counter32,
  	ahClientTxBeDataFrames			Counter32,
  	ahClientTxBgDataFrames			Counter32,
  	ahClientTxViDataFrames			Counter32,
  	ahClientTxVoDataFrames			Counter32,
  	ahClientTxMgtFrames				Counter32,
  	ahClientTxDataOctets			Counter32,
  	ahClientTxUnicastFrames			Counter32,
  	ahClientTxMulticastFrames		Counter32,
  	ahClientTxBroadcastFrames		Counter32,
  	ahClientTxAirtime               Counter64,
  	ahClientRxAirtime			 	Counter64,
  	ahClientAssociationTime			Counter32,
  	ahClientBSSID					AhNodeID
}

ahClientMac OBJECT-TYPE	
        SYNTAX	    AhNodeID
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "Uniquely identifies a client."
	::=  {  ahAssociationEntry  1  }

ahClientIP OBJECT-TYPE	
        SYNTAX	    IpAddress
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The IP address of the client if known. Otherwise, this
			field should be 0"
	::=  {  ahAssociationEntry  2  }

ahClientHostname OBJECT-TYPE	
        SYNTAX	    AhString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The host name of the client if known. Otherwise, this
			field should be empty"
	::=  {  ahAssociationEntry  3  }

ahClientRSSI OBJECT-TYPE	
        SYNTAX	    Integer32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "An indicator for the RSSI of the client 
			derived from last communication"
	::=  {  ahAssociationEntry  4  }

ahClientLinkUptime OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "Link up time in second"
	::=  {  ahAssociationEntry  5  }
	
ahClientCWPUsed OBJECT-TYPE	
    SYNTAX	    TruthValue
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The boolean indicating whether Captive Web Portal
			is used."
	::=  {  ahAssociationEntry  6 }

ahClientAuthMethod OBJECT-TYPE	
        SYNTAX	    AhAuthenticationMethod
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The authentication method the client uses to communicated
			with AP"
	::=  {  ahAssociationEntry  7  }

ahClientEncryptionMethod OBJECT-TYPE	
        SYNTAX	    AhEncrytionMethod
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The encryption method the client uses to communicated
			with AP"
	::=  {  ahAssociationEntry  8  }

ahClientMACProtocol OBJECT-TYPE	
        SYNTAX	    AhMACProtocol
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The radio mode the client uses to communicated
			with AP"
	::=  {  ahAssociationEntry  9  }

ahClientSSID OBJECT-TYPE	
        SYNTAX	    AhString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The SSID used by client to communicated
			with AP"
	::=  {  ahAssociationEntry  10 }

ahClientVLAN OBJECT-TYPE	
        SYNTAX	    Integer32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The VLAN used by client to communicated
			with AP"
	::=  {  ahAssociationEntry  11 }


ahClientUserProfId OBJECT-TYPE	
        SYNTAX	    Integer32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The user profile id used by client to communicated
			with AP"
	::=  {  ahAssociationEntry  12 }

ahClientChannel OBJECT-TYPE	
        SYNTAX	    Integer32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The radio channel used by client to communicated
			with AP"
	::=  {  ahAssociationEntry  13 }

ahClientLastTxRate OBJECT-TYPE	
        SYNTAX	    Integer32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The rate (KBPS) of last transmitting frame to the client."
	::=  {  ahAssociationEntry  14 }

ahClientUsername OBJECT-TYPE	
        SYNTAX	    AhString
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The client user name to login to the network.
			It contain empty string if the authentication
			method is other than EAP (802.1x)."
	::=  {  ahAssociationEntry  15 }

ahClientRxDataFrames OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of data frames received from client
			to AP"
	::=  {  ahAssociationEntry  16 }

ahClientRxDataOctets OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of data octets received from client
			to AP"
	::=  {  ahAssociationEntry  17 }

ahClientRxMgtFrames OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of mgt frames received from client
			to AP"
	::=  {  ahAssociationEntry  18 }

ahClientRxUnicastFrames OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of unitcast frames received from client
			to AP"
	::=  {  ahAssociationEntry  19 }

ahClientRxMulticastFrames OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of multicast frames received
			from client to AP."
	::=  {  ahAssociationEntry  20 }

ahClientRxBroadcastFrames OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of broadcast frames received
			from client to AP."
	::=  {  ahAssociationEntry  21 }

ahClientRxMICFailures OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of frames dropped due to Message
			Integrity Check failure from client to AP."
	::=  {  ahAssociationEntry  22 }

ahClientTxDataFrames OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted data frames
			from ."
	::=  {  ahAssociationEntry  23 }

ahClientTxMgtFrames OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted management frames
			from ."
	::=  {  ahAssociationEntry  24 }

ahClientTxDataOctets OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted data in octets
			from ."
	::=  {  ahAssociationEntry  25 }

ahClientTxUnicastFrames OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of unitcast frames transmitted from client
			to AP"
	::=  {  ahAssociationEntry  26 }

ahClientTxMulticastFrames OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of multicast frames transmitted from client
			to AP"
	::=  {  ahAssociationEntry  27 }

ahClientTxBroadcastFrames OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of broadcast frames transmitted from client
			to AP"
	::=  {  ahAssociationEntry  28 }

ahClientLastRxRate OBJECT-TYPE	
        SYNTAX	    Integer32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The rate (KBPS) of last received frame from client."
	::=  {  ahAssociationEntry  29 }

ahClientTxBeDataFrames OBJECT-TYPE	
    SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted best effort priority data frames
			from AP to client."
	::=  {  ahAssociationEntry  30 }
	
ahClientTxBgDataFrames OBJECT-TYPE	
    SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted back ground priority data frames
			from AP to client."
	::=  {  ahAssociationEntry  31 }
	
ahClientTxViDataFrames OBJECT-TYPE	
    SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted video priority data frames
			from AP to client."
	::=  {  ahAssociationEntry  32 }
	
ahClientTxVoDataFrames OBJECT-TYPE	
    SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted voice priority data frames
			from AP to client."
	::=  {  ahAssociationEntry  33 }

ahClientTxAirtime OBJECT-TYPE	
    SYNTAX	    Counter64
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The accumulative transmit time in microseconds ()
			from AP to client."
	::=  {  ahAssociationEntry  34 }

ahClientRxAirtime OBJECT-TYPE	
    SYNTAX	    Counter64
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The accumulative receive time in microseconds (us)
			from client to AP."
	::=  {  ahAssociationEntry  35 }
	
ahClientAssociationTime OBJECT-TYPE	
    SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The association time(s) of client connect to AP."
	::=  {  ahAssociationEntry  36 }
	
ahClientBSSID OBJECT-TYPE	
	    SYNTAX	    AhNodeID
		MAX-ACCESS  read-only
		STATUS	    current
		DESCRIPTION "It is the basic service set identifier of the client."
		::=  {  ahAssociationEntry  37 }
--
-- ahIfRadioStatsTable
--
-- Statistics for Aerohive HiveAP Radio interfaces.
--

ahRadioStatsTable	OBJECT-TYPE
	SYNTAX      SEQUENCE  OF  AhRadioStatsEntry
	MAX-ACCESS  not-accessible
	STATUS      current
	DESCRIPTION "Table of radio interface statistics."
	::=  {  ahInterface  3  }

ahRadioStatsEntry	OBJECT-TYPE
	SYNTAX		AhRadioStatsEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Individual entry of client table"
	INDEX		{  ifIndex }
	::=  {  ahRadioStatsTable 1  }

AhRadioStatsEntry ::=  SEQUENCE {
	ahRadioTxDataFrames						Counter32,
	ahRadioTxBeDataFrames					Counter32,
  	ahRadioTxBgDataFrames					Counter32,
  	ahRadioTxViDataFrames					Counter32,
  	ahRadioTxVoDataFrames					Counter32,
	ahRadioTxUnicastDataFrames 				Counter32,
	ahRadioTxMulticastDataFrames 			Counter32,
	ahRadioTxBroadcastDataFrames 			Counter32,
	ahRadioTxNonBeaconMgtFrames				Counter32,	
	ahRadioTxBeaconFrames					Counter32,
	ahRadioTxTotalRetries					Counter32,	
	ahRadioTxTotalFramesDropped				Counter32,	
	ahRadioTxTotalFrameErrors				Counter32,
	ahRadioTxFEForExcessiveHWRetries		Counter32,
	ahRadioTXRTSFailures					Counter32,	
	ahRadioRxTotalDataFrames				Counter32,
	ahRadioRxUnicastDataFrames  			Counter32,
	ahRadioRxMulticastDataFrames  			Counter32,
	ahRadioRxBroadcastDataFrames  			Counter32,
	ahRadioRxMgtFrames						Counter32,	
	ahRadioRxTotalFrameDropped				Counter32,
	ahRadioTxAirtime						Counter64,
	ahRadioRxAirtime						Counter64
}

ahRadioTxDataFrames OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmit data frames for the given
			interface."
	::=  {  ahRadioStatsEntry 1 }
	
ahRadioTxUnicastDataFrames  OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted unicast frames   
			 for the given interface."
	::=  {  ahRadioStatsEntry 2 }
	
ahRadioTxMulticastDataFrames  OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted multicast frames   
			 for the given interface."
	::=  {  ahRadioStatsEntry 3 }
	
ahRadioTxBroadcastDataFrames  OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted broadcast frames   
			 for the given interface."
	::=  {  ahRadioStatsEntry 4 }

ahRadioTxNonBeaconMgtFrames OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmit management frames
			other than beacon for the given interface."
	::=  {  ahRadioStatsEntry 5 }

ahRadioTxBeaconFrames OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmit beacon frames for the given 
			interface."
	::=  {  ahRadioStatsEntry 6 }

ahRadioTxTotalRetries OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The total number of transmit retries for the given 
			interface."
	::=  {  ahRadioStatsEntry 7 }
	
ahRadioTxTotalFramesDropped  OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmit frames dropped
			for the given interface."
	::=  {  ahRadioStatsEntry 8 }
	
ahRadioTxTotalFrameErrors  OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The total number of transmit frames in error
			 for the given interface."
	::=  {  ahRadioStatsEntry 9 }

ahRadioTxFEForExcessiveHWRetries  OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmit frames in error due to 
			excessive hardware retries for the given interface."
	::=  {  ahRadioStatsEntry 10 }

ahRadioRxTotalDataFrames  OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The total number of received data frames 
			for the given interface."
	::=  {  ahRadioStatsEntry 11 }
	
ahRadioRxUnicastDataFrames  OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of received unicast frames   
			 for the given interface."
	::=  {  ahRadioStatsEntry 12 }
	
ahRadioRxMulticastDataFrames  OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of received multicast frames   
			 for the given interface."
	::=  {  ahRadioStatsEntry 13 }
	
ahRadioRxBroadcastDataFrames  OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of received broadcast frames   
			 for the given interface."
	::=  {  ahRadioStatsEntry 14 }
	
ahRadioRxMgtFrames  OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of received management frames 
			for the given interface."
	::=  {  ahRadioStatsEntry 15 }
	
ahRadioRxTotalFrameDropped  OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The total number of dropped received frames   
			for the given interface."
	::=  {  ahRadioStatsEntry 16 }

ahRadioTxBeDataFrames OBJECT-TYPE	
    SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted best effort priority data frames
			from the radio."
	::=  {  ahRadioStatsEntry  17 }
	
ahRadioTxBgDataFrames OBJECT-TYPE	
    SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted back ground priority data frames
			from the radio."
	::=  {  ahRadioStatsEntry  18 }
	
ahRadioTxViDataFrames OBJECT-TYPE	
    SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted video priority data frames
			from the radio."
	::=  {  ahRadioStatsEntry  19 }
	
ahRadioTxVoDataFrames OBJECT-TYPE	
    SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted voice priority data frames
			from the radio."
	::=  {  ahRadioStatsEntry  20 }

ahRadioTXRTSFailures OBJECT-TYPE	
    SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted RTS failures
			from the Radio."
	::=  {  ahRadioStatsEntry  21 }

ahRadioTxAirtime OBJECT-TYPE	
    SYNTAX	    Counter64
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The accumulative transmit time in microseconds (us)
			from the given Radio."
	::=  {  ahRadioStatsEntry  22 }

ahRadioRxAirtime OBJECT-TYPE	
    SYNTAX	    Counter64
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The accumulative receive time in microseconds (us)
			to the given radio."
	::=  {  ahRadioStatsEntry  23 }
	
--
-- ahVIfStatsTable
--
-- Statistics for Aerohive HiveAP Virtual Interfaces (VIf).
--

ahVIfStatsTable	OBJECT-TYPE
	SYNTAX      SEQUENCE  OF  AhVIfStatsEntry
	MAX-ACCESS  not-accessible
	STATUS      current
	DESCRIPTION "Table of virtual interface (vif) statistics."
	::=  {  ahInterface  4  }

ahVIfStatsEntry	OBJECT-TYPE
	SYNTAX		AhVIfStatsEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Individual entry of VIf statistics"
	INDEX		{  ifIndex }
	::=  {  ahVIfStatsTable 1  }

AhVIfStatsEntry ::=  SEQUENCE {
	ahVIfRxDataFrames				Counter32,
	ahVIfRxUnicastDataFrames		Counter32,
	ahVIfRxMulticastDataFrames		Counter32,
	ahVIfRxBroadcastDataFrames		Counter32,
	ahVIfRxErrorFrames				Counter32,
	ahVIfRxDroppedFrames			Counter32,
	ahVIfTxDataFrames				Counter32,
	ahVIfTxBeDataFrames				Counter32,
  	ahVIfTxBgDataFrames				Counter32,
  	ahVIfTxViDataFrames				Counter32,
  	ahVIfTxVoDataFrames				Counter32,
	ahVIfTxUnicastDataFrames		Counter32,
	ahVIfTxMulticastDataFrames		Counter32,
	ahVIfTxBroadcastDataFrames		Counter32,
	ahVIfTxErrorFrames				Counter32,
	ahVIfTxDroppedFrames			Counter32,
	ahVifTxAirtime					Counter64,
	ahVifRxAirtime					Counter64
}

ahVIfRxDataFrames OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of received data frames for the given
			virtual interface."
	::=  {  ahVIfStatsEntry 1 }
	
ahVIfRxUnicastDataFrames  OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of received unicast data frames   
			 for the given virtual interface."
	::=  {  ahVIfStatsEntry 2 }
	
ahVIfRxMulticastDataFrames  OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of received multicast data frames   
			 for the given virtual interface."
	::=  {  ahVIfStatsEntry 3 }
	
ahVIfRxBroadcastDataFrames  OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of received broadcast data frames   
			 for the given virtual interface."
	::=  {  ahVIfStatsEntry 4 }
	
ahVIfRxErrorFrames OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of received error frames for the given
			virtual interface."
	::=  {  ahVIfStatsEntry 5 }

ahVIfRxDroppedFrames OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of received dropped frames for the given
			virtual interface."
	::=  {  ahVIfStatsEntry 6 }
	
ahVIfTxDataFrames OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of trasmitted data frames 
			for the given virtual interface."
	::=  {  ahVIfStatsEntry 7 }

ahVIfTxUnicastDataFrames  OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted unicast data frames   
			 for the given virtual interface."
	::=  {  ahVIfStatsEntry 8 }
	
ahVIfTxMulticastDataFrames  OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted multicast data frames   
			 for the given virtual interface."
	::=  {  ahVIfStatsEntry 9 }
	
ahVIfTxBroadcastDataFrames  OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted broadcast data frames   
			 for the given virtual interface."
	::=  {  ahVIfStatsEntry 10 }
	
ahVIfTxErrorFrames OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of trasmitted frames encontered error 
			for the given virtual interface."
	::=  {  ahVIfStatsEntry 11 }
	
ahVIfTxDroppedFrames OBJECT-TYPE	
        SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of trasmitted frames dropped due to error  
			condition for the given virtual interface."
	::=  {  ahVIfStatsEntry 12 }

ahVIfTxBeDataFrames OBJECT-TYPE	
    SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted best effort priority data frames
			from the virtual interface."
	::=  {  ahVIfStatsEntry  13 }
	
ahVIfTxBgDataFrames OBJECT-TYPE	
    SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted back ground priority data frames
			from the virtual interface."
	::=  {  ahVIfStatsEntry  14 }
	
ahVIfTxViDataFrames OBJECT-TYPE	
    SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted video priority data frames
			from the virtual interface."
	::=  {  ahVIfStatsEntry  15 }
	
ahVIfTxVoDataFrames OBJECT-TYPE	
    SYNTAX	    Counter32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The number of transmitted voice priority data frames
			from the virtual interface."
	::=  {  ahVIfStatsEntry  16 }

ahVifTxAirtime OBJECT-TYPE	
    SYNTAX	    Counter64
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The accumulative transmit time in microseconds (us)
			from the given SSID."
	::=  {  ahVIfStatsEntry  17 }

ahVifRxAirtime OBJECT-TYPE	
    SYNTAX	    Counter64
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The accumulative receive time in microseconds (us)
			to the given SSID."
	::=  {  ahVIfStatsEntry  18 }
	
--
-- ahIfRadioAttributeTable
--
-- Attribute for Aerohive HiveAP Radio interfaces.
--

ahRadioAttributeTable	OBJECT-TYPE
	SYNTAX      SEQUENCE  OF  AhRadioAttributeEntry
	MAX-ACCESS  not-accessible
	STATUS      current
	DESCRIPTION "Table of radio interface statistics."
	::=  {  ahInterface  5  }

ahRadioAttributeEntry	OBJECT-TYPE
	SYNTAX		AhRadioAttributeEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Individual entry for each Radio"
	INDEX		{  ifIndex }
	::=  {  ahRadioAttributeTable 1  }

AhRadioAttributeEntry ::=  SEQUENCE {
	ahRadioChannel			Integer32,
	ahRadioTxPower  	    Integer32,
	ahRadioNoiseFloor        Integer32
	}
	
ahRadioChannel  OBJECT-TYPE	
    SYNTAX	    Integer32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The channel number currently in use for this radio."
	::=  {  ahRadioAttributeEntry 1 }
	
ahRadioTxPower  OBJECT-TYPE	
    SYNTAX	    Integer32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The transmit power currently for the radio in dbm. The range 
				is 0 to 20 dBm"
	::=  {  ahRadioAttributeEntry 2 }

ahRadioNoiseFloor  OBJECT-TYPE	
    SYNTAX	    Integer32
	MAX-ACCESS  read-only
	STATUS	    current
	DESCRIPTION "The noise floor for the radio dbm. The range is 0 to 256 dBm.
				The value of this variable is the actual value plus 256 dBm."
	::=  {  ahRadioAttributeEntry 3 }
		
END