--
-- ALPINE-GEN-CARD-TDCM-MIB.mib
-- 

	ALPINE-GEN-CARD-TDCM-MIB DEFINITIONS ::= BEGIN
 
		IMPORTS
			alpineGeneric			
				FROM ALPINE-ROOT			
			Integer32, OBJECT-TYPE			
				FROM SNMPv2-SMI;
	
	
--
-- Node definitions
--
	
		-- 1.3.6.1.4.1.52326.1.2
		alpineGenCardTdcm OBJECT IDENTIFIER ::= { alpineGeneric 2 }

		
		-- 1.3.6.1.4.1.52326.1.2.1
		alpineGenCardTdcmInfosTable OBJECT-TYPE
			SYNTAX SEQUENCE OF AlpineGenCardTdcmInfosEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"Description."
			::= { alpineGenCardTdcm 1 }

		
		-- 1.3.6.1.4.1.52326.1.2.1.1
		alpineGenCardTdcmInfosEntry OBJECT-TYPE
			SYNTAX AlpineGenCardTdcmInfosEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"Description."
			INDEX { gctiSlotNum }
			::= { alpineGenCardTdcmInfosTable 1 }

		
		AlpineGenCardTdcmInfosEntry ::=
			SEQUENCE { 
				gctiSlotNum
					Integer32,
				gctiWorkMode
					Integer32,
				gctiDefaultDispersion
					Integer32,
				gctiCurrentDispersion
					Integer32,
				gctiAutoModeSwitch
					Integer32,
				gctiSaveConfig
					Integer32
			 }

		-- 1.3.6.1.4.1.52326.1.2.1.1.1
		gctiSlotNum OBJECT-TYPE
			SYNTAX Integer32 (1..2)
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"Slot number."
			::= { alpineGenCardTdcmInfosEntry 1 }

		
		-- 1.3.6.1.4.1.52326.1.2.1.1.2
		gctiWorkMode OBJECT-TYPE
			SYNTAX Integer32 (1..2)
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Work mode of TDCM.
				1. Manual Mode.
				2. Auto Mode."
			::= { alpineGenCardTdcmInfosEntry 2 }

		
		-- 1.3.6.1.4.1.52326.1.2.1.1.3
		gctiDefaultDispersion OBJECT-TYPE
			SYNTAX Integer32
			UNITS "ps/nm*km"
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"The default dipersion value for line card startup."
			::= { alpineGenCardTdcmInfosEntry 3 }

		
		-- 1.3.6.1.4.1.52326.1.2.1.1.4
		gctiCurrentDispersion OBJECT-TYPE
			SYNTAX Integer32
			UNITS "ps/nm*km"
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"Current dispersion setting."
			::= { alpineGenCardTdcmInfosEntry 4 }

		
		-- 1.3.6.1.4.1.52326.1.2.1.1.5
		gctiAutoModeSwitch OBJECT-TYPE
			SYNTAX Integer32 (1..2)
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Turn on/off auto engine when current work mode is auto.
				1. Turn on auto monitor and tunning for current monitor fiber.
				2. Turn off auto monitor and tunning.
				Note, this value is only available when current work mode 'gctiWorkMode' is auto."
			::= { alpineGenCardTdcmInfosEntry 5 }

		
		-- 1.3.6.1.4.1.52326.1.2.1.1.6
		gctiSaveConfig OBJECT-TYPE
			SYNTAX Integer32 (0..2)
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Save current configuration into flash for non-valatile setting.
				0: Idle/Save Done.
				1: Issue save command.
				2: Saving.
				Only value 1 can be accepted in snmp set."
			::= { alpineGenCardTdcmInfosEntry 6 }

		
	
	END

--
-- ALPINE-GEN-CARD-TDCM-MIB.mib
--