-- COPYRIGHT NOTICE -- Copyright (c) Radware Ltd. 2009 -- All rights reserved ALTEON-CHEETAH-SWITCH-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Gauge32, Counter64, IpAddress, TimeTicks FROM SNMPv2-SMI DisplayString, PhysAddress FROM SNMPv2-TC aws-switch FROM ALTEON-ROOT-MIB ipAddrEntry FROM RFC1213-MIB ; FeatureStatus ::= INTEGER { enable(1), disable(2) } agent MODULE-IDENTITY LAST-UPDATED "200908050000Z" -- 5 August, 2009 ORGANIZATION "Radware Ltd." CONTACT-INFO "Lobby 1 (Visitors) and Lobby 2 (Deliveries) 575 Corporate Drive Mahwah, NJ 07430 support@radware.com" DESCRIPTION "The MIB module for the Alteon OS Switch." REVISION "200908050000Z" -- 5 August, 2009 DESCRIPTION "Added revision clause for SMIv2 compliance." ::= { aws-switch 1 } agentConfig OBJECT IDENTIFIER ::= { agent 1 } agentStats OBJECT IDENTIFIER ::= { agent 2 } agentInfo OBJECT IDENTIFIER ::= { agent 3 } agentOper OBJECT IDENTIFIER ::= { agent 4 } agSystem OBJECT IDENTIFIER ::= { agentConfig 1 } agPortConfig OBJECT IDENTIFIER ::= { agentConfig 2 } agRadiusConfig OBJECT IDENTIFIER ::= { agentConfig 3 } agNTP OBJECT IDENTIFIER ::= { agentConfig 4 } agSyslog OBJECT IDENTIFIER ::= { agentConfig 5 } agTrapHost OBJECT IDENTIFIER ::= { agentConfig 6 } agTftp OBJECT IDENTIFIER ::= { agentConfig 7 } agApply OBJECT IDENTIFIER ::= { agentConfig 8 } agMgmt OBJECT IDENTIFIER ::= { agentConfig 9 } agSslproc OBJECT IDENTIFIER ::= { agentConfig 10 } agTacacsConfig OBJECT IDENTIFIER ::= { agentConfig 11 } agMgmtNetConfig OBJECT IDENTIFIER ::= { agentConfig 12 } agSecurity OBJECT IDENTIFIER ::= { agentConfig 14 } agPortAccessCfg OBJECT IDENTIFIER ::= { agentConfig 16 } agSave OBJECT IDENTIFIER ::= { agentConfig 17 } agFileTransfer OBJECT IDENTIFIER ::= { agentConfig 18 } agAccess OBJECT IDENTIFIER ::= { agentConfig 19 } agSnmpSetFail OBJECT IDENTIFIER ::= { agentConfig 22 } agAlertThreshold OBJECT IDENTIFIER ::= { agentConfig 23 } agVLANAccessCfg OBJECT IDENTIFIER ::= { agentConfig 24 } agPgroup OBJECT IDENTIFIER ::= { agSecurity 1 } ipAclCfg OBJECT IDENTIFIER ::= { agSecurity 3 } udpBlastCfg OBJECT IDENTIFIER ::= { agSecurity 4 } secGeneralCfg OBJECT IDENTIFIER ::= { agSecurity 5 } dosAttackPrevCfg OBJECT IDENTIFIER ::= { agSecurity 6 } ipDstAclCfg OBJECT IDENTIFIER ::= { agSecurity 7 } bogonCfg OBJECT IDENTIFIER ::= { agSecurity 9 } pktStats OBJECT IDENTIFIER ::= { agentStats 1 } mpCpuStats OBJECT IDENTIFIER ::= { agentStats 2 } portStats OBJECT IDENTIFIER ::= { agentStats 3 } spStats OBJECT IDENTIFIER ::= { agentStats 4 } mgmtStats OBJECT IDENTIFIER ::= { agentStats 5 } securityStats OBJECT IDENTIFIER ::= { agentStats 6 } agClearStats OBJECT IDENTIFIER ::= { agentStats 7 } mpMemStats OBJECT IDENTIFIER ::= { agentStats 8 } ntpStats OBJECT IDENTIFIER ::= { agentStats 9 } portMirrorStats OBJECT IDENTIFIER ::= { agentStats 11 } capacityUsageStats OBJECT IDENTIFIER ::= { agentStats 12 } spGAStats OBJECT IDENTIFIER ::= { agentStats 13 } hardware OBJECT IDENTIFIER ::= { agentInfo 1 } portInfo OBJECT IDENTIFIER ::= { agentInfo 2 } swKeyInfo OBJECT IDENTIFIER ::= { agentInfo 3 } agDiff OBJECT IDENTIFIER ::= { agentInfo 4 } agCfgDump OBJECT IDENTIFIER ::= { agentInfo 5 } mgmtInfo OBJECT IDENTIFIER ::= { agentInfo 6 } securityInfo OBJECT IDENTIFIER ::= { agentInfo 7 } capacityInfo OBJECT IDENTIFIER ::= { agentInfo 9 } agNTPOper OBJECT IDENTIFIER ::= { agentOper 2 } agLicenseInfo OBJECT IDENTIFIER ::= { agentInfo 10 } agLicenseOper OBJECT IDENTIFIER ::= { agentOper 3 } agLicenseConfig OBJECT IDENTIFIER ::= { agentConfig 21 } agSysPeerConfig OBJECT IDENTIFIER ::= { agentConfig 25 } agSecIpAclOper OBJECT IDENTIFIER ::= { agentOper 4 } agUserPasswdOper OBJECT IDENTIFIER ::= { agentOper 5 } agSyslogOper OBJECT IDENTIFIER ::= { agentOper 6 } agPeerSyncOper OBJECT IDENTIFIER ::= { agentOper 8 } -- There are two configuration blocks for Alteon switches. -- The "current_config" reflects the configuration parameters that the -- switch is operating on and it is read-only. The objects with "CurCfg" -- in the name are reflect to this configuration block. -- -- The "new_config" accepts user configurations on set. The objects with -- "NewCfg" in the name are reflect to this configuration block. -- -- The newly set configurations will not take effect until a "apply" -- command has been issued (See agApplyConfiguration object defined in -- ALTEON-PRIVATE-MIBS). -- -- The newly set configurations will not be saved through next restarting -- of the switch unless a "save" command has been issued (See -- agSaveConfiguration object defined in ALTEON-PRIVATE-MIBS). -- Hardware Information hwTemperatureStatus OBJECT-TYPE SYNTAX INTEGER { ok(1), exceed(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the temperature sensor." ::= { hardware 3 } hwFanStatus OBJECT-TYPE SYNTAX INTEGER { ok(1), fail(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the fan." ::= { hardware 4 } switchCapL2Info OBJECT IDENTIFIER ::= { capacityInfo 1 } switchCapL3Info OBJECT IDENTIFIER ::= { capacityInfo 2 } switchCapSlbInfo OBJECT IDENTIFIER ::= { capacityInfo 3 } switchCapSlbPortInfo OBJECT IDENTIFIER ::= { capacityInfo 4 } switchCapBwmInfo OBJECT IDENTIFIER ::= { capacityInfo 5 } switchCapSecInfo OBJECT IDENTIFIER ::= { capacityInfo 6 } switchCapGeneralInfo OBJECT IDENTIFIER ::= { capacityInfo 7 } switchCapFDBMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for FDB in device." ::= { switchCapL2Info 1 } switchCapFDBCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for FDB in device." ::= { switchCapL2Info 2 } switchCapFDBPerSPMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximun number of entries for FDB per SP in device." ::= { switchCapL2Info 3 } switchCapVlanMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for vlan in device." ::= { switchCapL2Info 4 } switchCapVlanCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for vlan in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapL2Info 5 } switchCapStaticTrunkGrpsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for static trunk groups in device." ::= { switchCapL2Info 6 } switchCapStaticTrunkGrpsCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for static trunk groups in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapL2Info 7 } switchCapLACPTrunkGRs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "LACP Trunk groups in device." ::= { switchCapL2Info 8 } switchCapTrunksperTrunkGR OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Trunks per trunk group in device." ::= { switchCapL2Info 9 } switchCapSTGsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for STG in device." ::= { switchCapL2Info 10 } switchCapSTGsCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for STG in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapL2Info 11 } switchCapPortTeamsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for port teams in device." ::= { switchCapL2Info 12 } switchCapPortTeamsCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for port teams in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapL2Info 13 } switchCapMonitorPorts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of monitor ports." ::= { switchCapL2Info 14 } switchCapIpIntfMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for interfaces in device." ::= { switchCapL3Info 1 } switchCapIpIntfCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for interfaces in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapL3Info 2 } switchCapIpGWMaxEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for gateways in device, the value is in the form x+y where 'x' indicates number of default gateways and 'y' indicates number of VLAN gateways." ::= { switchCapL3Info 3 } switchCapIpGWCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for gateways in device, the value is in the form x+y(a+b) where 'x' indicates number of current default gateways, 'y' indicates number of current VLAN gateways, 'a' indicates number of enabled default gateways, 'b' indicates number of enabled VLAN gateways only." ::= { switchCapL3Info 4 } switchCapIpRoutesMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for routes in device." ::= { switchCapL3Info 5 } switchCapIpRoutesCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for routes in device." ::= { switchCapL3Info 6 } switchCapIpStaticRoutesMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for static routes in device." ::= { switchCapL3Info 7 } switchCapIpStaticRoutesCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for static routes in device." ::= { switchCapL3Info 8 } switchCapIpARPMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for ARP in device." ::= { switchCapL3Info 9 } switchCapIpARPCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for ARP in device." ::= { switchCapL3Info 10 } switchCapIpStaticARPMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for static ARP in device." ::= { switchCapL3Info 11 } switchCapIpStaticARPCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for static ARP in device." ::= { switchCapL3Info 12 } switchCapLocNetsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for local nets in device." ::= { switchCapL3Info 13 } switchCapLocNetsCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for local nets in device." ::= { switchCapL3Info 14 } switchCapDNSSerMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for DNS servers in device." ::= { switchCapL3Info 15 } switchCapDNSSerCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for DNS servers in device." ::= { switchCapL3Info 16 } switchCapBootpSerMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for BOOTP servers in device." ::= { switchCapL3Info 17 } switchCapBootpSerCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for BOOTP servers in device." ::= { switchCapL3Info 18 } switchCapRIPIntfMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries of RIP interfaces in device." ::= { switchCapL3Info 19 } switchCapRIPIntfCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries of RIP interfaces in device." ::= { switchCapL3Info 20 } switchCapOSPFIntfMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for OSPF interfaces in device." ::= { switchCapL3Info 21 } switchCapOSPFIntfCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for OSPF interfaces in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapL3Info 22 } switchCapOSPFAreasMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for OSPF areas in device." ::= { switchCapL3Info 23} switchCapOSPFAreasCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for OSPF areas in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapL3Info 24 } switchCapOSPFSummaryRangesMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for OSPF summary ranges in device." ::= { switchCapL3Info 25 } switchCapOSPFSummaryRangesCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for OSPF summary ranges in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapL3Info 26 } switchCapOSPFVirtLinksMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for OSPF virtual links in device." ::= { switchCapL3Info 27 } switchCapOSPFVirtLinksCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for OSPF virtual links in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapL3Info 28 } switchCapOSPFHostsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for OSPF hosts in device." ::= { switchCapL3Info 29 } switchCapOSPFHostsCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for OSPF hosts in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapL3Info 30 } switchCapLSDBLimit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "LSDB limit in device." ::= { switchCapL3Info 31 } switchCapBGPPeersMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for BGP peers in device." ::= { switchCapL3Info 32 } switchCapBGPPeersCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for BGP peers in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapL3Info 33 } switchCapBGPRouteAggrsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for BGP route aggregators in device." ::= { switchCapL3Info 34 } switchCapBGPRouteAggrsCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for BGP route aggregators in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapL3Info 35 } switchCapRouteMapsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for route maps in device." ::= { switchCapL3Info 36 } switchCapRouteMapsCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for route maps in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapL3Info 37 } switchCapNwkFltsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for network filters in device." ::= { switchCapL3Info 38 } switchCapNwkFltsCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for network filters in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapL3Info 39 } switchCapASFlts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for AS filters in device." ::= { switchCapL3Info 40 } switchCapVRRPRtrsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for VRRP routers in device." ::= { switchCapL3Info 41 } switchCapVRRPRtrsCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for VRRP routers in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapL3Info 42 } switchCapVRRPRtrGRsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for VRRP router groups in device." ::= { switchCapL3Info 43 } switchCapVRRPRtrGRsCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for VRRP router groups in device,the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapL3Info 44 } switchCapVRRPIntfsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for VRRP interfaces in device." ::= { switchCapL3Info 45 } switchCapVRRPIntfsCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for VRRP interfaces in device." ::= { switchCapL3Info 46 } switchCapRealSersMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for real servers in device." ::= { switchCapSlbInfo 1 } switchCapRealSersCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for real servers in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapSlbInfo 2 } switchCapSerGRsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for real server groups in device." ::= { switchCapSlbInfo 3 } switchCapSerGRsCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for real server groups in device." ::= { switchCapSlbInfo 4 } switchCapVirtSersMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for virtual servers in device." ::= { switchCapSlbInfo 5 } switchCapVirtSersCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for virtual servers in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapSlbInfo 6 } switchCapVirtServicesEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for virtual services in device." ::= { switchCapSlbInfo 7 } switchCapRealServicesEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for real services in device." ::= { switchCapSlbInfo 8 } switchCapRealIDSSer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for real IDS servers." ::= { switchCapSlbInfo 9 } switchCapIDSSerGRs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for IDS server groups." ::= { switchCapSlbInfo 10 } switchCapGSLBDomainsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for global SLB domains in device." ::= { switchCapSlbInfo 11 } switchCapGSLBDomainsCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for global SLB domains in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapSlbInfo 12 } switchCapGSLBServicesMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for global SLB services in device." ::= { switchCapSlbInfo 13 } switchCapGSLBServicesCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for global SLB services in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapSlbInfo 14 } switchCapGSLBLocSersMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for global SLB local servers in device." ::= { switchCapSlbInfo 15 } switchCapGSLBLocSersCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for global SLB local servers in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapSlbInfo 16 } switchCapGSLBRemSersMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for global SLB remote servers in device." ::= { switchCapSlbInfo 17 } switchCapGSLBRemSersCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for global SLB remote servers in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapSlbInfo 18 } switchCapGSLBRemSitesMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for global SLB sites in device." ::= { switchCapSlbInfo 19 } switchCapGSLBRemSitesCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for global SLB sites in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapSlbInfo 20 } switchCapGSLBFailoversPerRemSiteMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for global SLB failovers per site in device." ::= { switchCapSlbInfo 21 } switchCapGSLBFailoversPerRemSiteCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for global SLB failovers per site in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapSlbInfo 22 } switchCapGSLBNetworksMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for global SLB networks in device." ::= { switchCapSlbInfo 23 } switchCapGSLBNetworksCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for global SLB networks in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapSlbInfo 24 } switchCapGSLBGeographicalRegionsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for global geographical regions in device." ::= { switchCapSlbInfo 25 } switchCapGSLBGeographicalRegionsCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for global geographical regions in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapSlbInfo 26 } switchCapGSLBRulesMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for global SLB rules in device." ::= { switchCapSlbInfo 27 } switchCapGSLBRulesCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for global SLB rules in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapSlbInfo 28 } switchCapGSLBMetricsPerRuleMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for global SLB metrics per rule in device." ::= { switchCapSlbInfo 29 } switchCapGSLBMetricPerRuleCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for global SLB metrics per rule in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapSlbInfo 30 } switchCapGSLBDNSPersCacheMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for global SLB DNS persistence cache in device." ::= { switchCapSlbInfo 31 } switchCapGSLBDNSPersCacheCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for global SLB DNS persistence cache in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapSlbInfo 32 } switchCapFltsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for filters in device." ::= { switchCapSlbInfo 33 } switchCapFltsCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for filters in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapSlbInfo 34 } switchCapPIPsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for PIPs in device." ::= { switchCapSlbInfo 35 } switchCapPIPsCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for pips in device." ::= { switchCapSlbInfo 36 } switchCapScriptHealthChecksMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for scriptable health checks in device." ::= { switchCapSlbInfo 37 } switchCapScriptHealthChecksCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for scriptable health checks in device." ::= { switchCapSlbInfo 38 } switchCapSNMPHealthChecksMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for SNMP health checks in device." ::= { switchCapSlbInfo 39 } switchCapSNMPHealthChecksCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for snmp health checks in device." ::= { switchCapSlbInfo 40 } switchCapRulesforURLParsingMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for rules for URL parsing in device." ::= { switchCapSlbInfo 41 } switchCapRulesforURLParsingCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for rules for URL parsing in device." ::= { switchCapSlbInfo 42 } switchCapSLBSessionsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for SLB sessions in device." ::= { switchCapSlbInfo 43 } switchCapSLBSessionsCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for SLB sessions in device." ::= { switchCapSlbInfo 44 } switchCapNumofRportstoVport OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of rports to vport." ::= { switchCapSlbInfo 45 } switchCapDomianRecordsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for domain records in device." ::= { switchCapSlbInfo 46 } switchCapDomainRecordsCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for domain records in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapSlbInfo 47 } switchCapMappingPerDomainrecord OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for mapping per domain record in device." ::= { switchCapSlbInfo 48 } switchCapNetworkClassesMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for network classes in device." ::= { switchCapSlbInfo 49 } switchCapNetworkClassesCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for network classes in device." ::= { switchCapSlbInfo 50 } switchCapNetworkElementsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for network elements in device." ::= { switchCapSlbInfo 51 } switchCapNetworkElementsCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for network elements in device." ::= { switchCapSlbInfo 52 } switchCapSlbPortInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwitchCapSlbPortInfoTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of slb port information." ::= { switchCapSlbPortInfo 1 } switchCapSlbPortInfoTableEntry OBJECT-TYPE SYNTAX SwitchCapSlbPortInfoTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the slb port information table." INDEX { switchCapSlbPortInfoIndx} ::= { switchCapSlbPortInfoTable 1 } SwitchCapSlbPortInfoTableEntry ::= SEQUENCE { switchCapSlbPortInfoIndx Integer32, switchCapSlbPortClientState INTEGER, switchCapSlbPortSerState INTEGER, switchCapSlbPortFltState DisplayString, switchCapSlbPortRTSState INTEGER } switchCapSlbPortInfoIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index of switch port." ::= { switchCapSlbPortInfoTableEntry 1 } switchCapSlbPortClientState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Client state on the switch port." ::= { switchCapSlbPortInfoTableEntry 2 } switchCapSlbPortSerState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Server state on the switch port." ::= { switchCapSlbPortInfoTableEntry 3 } switchCapSlbPortFltState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "It is in the form E(x) where filter is enabled on the port and x is the number of filters configured for port. Otherwise disable." ::= { switchCapSlbPortInfoTableEntry 4 } switchCapSlbPortRTSState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "RTS processing state on the switch port." ::= { switchCapSlbPortInfoTableEntry 5 } bwmPoliciesMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for bwm policies in device ." ::= { switchCapBwmInfo 1 } bwmPoliciesCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for bwm policies in device." ::= { switchCapBwmInfo 2 } bwmContsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for bwm contracts in device." ::= { switchCapBwmInfo 3 } bwmContsCurrEnt OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for bwm contracts in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only." ::= { switchCapBwmInfo 4 } bwmGRsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for bwm groups in device." ::= { switchCapBwmInfo 5 } bwmGRsCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for bwm groups in device." ::= { switchCapBwmInfo 6 } bwmContsPerGRs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for bwm contracts per group in device." ::= { switchCapBwmInfo 7 } bwmTimePoliciesPerCont OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for bwm time policies per contract." ::= { switchCapBwmInfo 8 } configSrcIPACLsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for configuration source IP ACLs." ::= { switchCapSecInfo 1 } configSrcIPACLsCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for configuration source IP ACLs." ::= { switchCapSecInfo 2 } bogonSrcIPACLsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for bogon source IP ACLs." ::= { switchCapSecInfo 3 } bogonSrcIPACLsCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for bogon source IP ACLs." ::= { switchCapSecInfo 4 } operSrcIPACLsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for operation source IP ACLs." ::= { switchCapSecInfo 5 } operSrcIPACLsCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for operaion source IP ACLs." ::= { switchCapSecInfo 6 } totalSrcIPACLsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for total source IP ACLs." ::= { switchCapSecInfo 7 } totalSrcIPACLsCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for total source IP ACLs." ::= { switchCapSecInfo 8 } configDstIPACLsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for configuration destination IP ACLs." ::= { switchCapSecInfo 9 } configDstIPACLsCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for configuration destination IP ACLs." ::= { switchCapSecInfo 10 } operDstIPACLsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for operation destination IP ACLs." ::= { switchCapSecInfo 11 } operDstIPACLsCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for operaion destination IP ACLs." ::= { switchCapSecInfo 12 } totalDstIPACLsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for total destination IP ACLs." ::= { switchCapSecInfo 13 } totalDstIPACLsCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for total destination IP ACLs." ::= { switchCapSecInfo 14 } ipDosAtkPrevention OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for IP DOS attack prevention." ::= { switchCapSecInfo 15 } tcpDosAtkPrevention OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for TCP DOS attack prevention." ::= { switchCapSecInfo 16 } udpDosAtkPrevention OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for UDP DOS attack prevention." ::= { switchCapSecInfo 17 } icmpDosAtkPrevention OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for ICMP DOS attack prevention." ::= { switchCapSecInfo 18 } igmpDosAtkPrevention OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for IGMP DOS attack prevention." ::= { switchCapSecInfo 19 } arpDosAtkPrevention OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for ARP DOS attack prevention." ::= { switchCapSecInfo 20 } ipv6DosAtkPrevention OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for ipv6 DOS attack prevention." ::= { switchCapSecInfo 21 } totalDosAtkPrevention OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of entries for DOS attack preventions." ::= { switchCapSecInfo 22 } udpBlastProtection OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies UDP ports for UDP blast protection." ::= { switchCapSecInfo 23 } syslogHostMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for syslog hosts in device." ::= { switchCapGeneralInfo 1 } syslogHostCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for syslog hosts in device." ::= { switchCapGeneralInfo 2 } radiusSerMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for radius servers in device ." ::= { switchCapGeneralInfo 3 } radiusSerCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for radius servers in device." ::= { switchCapGeneralInfo 4 } tacacsSerMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for tacacs+ server in device." ::= { switchCapGeneralInfo 5 } tacacsSerCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for tacacs+ server in device." ::= { switchCapGeneralInfo 6 } ntpSerMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for ntp servers in device ." ::= { switchCapGeneralInfo 7 } ntpSerCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for ntp servers in device." ::= { switchCapGeneralInfo 8 } smtpHostsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for smtp hosts in device." ::= { switchCapGeneralInfo 9 } smtpHostsCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for smtp hosts in device." ::= { switchCapGeneralInfo 10 } mgmtNetworksMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for management networks in device ." ::= { switchCapGeneralInfo 11 } mgmtNetworksCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for management networks in device." ::= { switchCapGeneralInfo 12 } endUsers OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for end users in device." ::= { switchCapGeneralInfo 13 } panicDumps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum panic dumps in device." ::= { switchCapGeneralInfo 14 } snmpv3UsersMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for snmpv3 users in device." ::= { switchCapGeneralInfo 17 } snmpv3UsersCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for snmpv3 users in device." ::= { switchCapGeneralInfo 18 } snmpv3ViewsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for snmpv3 views in device." ::= { switchCapGeneralInfo 19 } snmpv3ViewsCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for snmpv3 views in device." ::= { switchCapGeneralInfo 20 } snmpv3AccessGRsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for snmpv3 access groups in device." ::= { switchCapGeneralInfo 21 } snmpv3AccessGRsCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for snmpv3 access groups in device." ::= { switchCapGeneralInfo 22 } snmpv3TargetAddrMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for snmpv3 target addresses in device." ::= { switchCapGeneralInfo 23 } snmpv3TargetAddrCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for snmpv3 target addresses in device." ::= { switchCapGeneralInfo 24 } snmpv3TargetParamsMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries for snmpv3 target parameters in device." ::= { switchCapGeneralInfo 25 } snmpv3TargetParamsCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries for snmpv3 target parameters in device." ::= { switchCapGeneralInfo 26 } ramSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "RAM Size (GB)." ::= { switchCapGeneralInfo 27 } hardDiskMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Hard Disk Maximum Capicity (GB)." ::= { switchCapGeneralInfo 28 } hardDiskCur OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Hard Disk In Use (GB)." ::= { switchCapGeneralInfo 29 } cacheUsageMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Cache available in MB." ::= { switchCapGeneralInfo 30 } cacheUsageCurrEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Cache Usage in MB." ::= { switchCapGeneralInfo 31 } agLicenseInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AgLicenseInfoTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of license Information." ::= { agLicenseInfo 1 } agLicenseInfoTableEntry OBJECT-TYPE SYNTAX AgLicenseInfoTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the license Information table." INDEX { licenseInfoIdx } ::= { agLicenseInfoTable 1 } AgLicenseInfoTableEntry ::= SEQUENCE { licenseInfoIdx Integer32, softwareKey DisplayString, licenseType INTEGER, remainingDays INTEGER, remainingDaysLeft DisplayString, licenseSize Integer32, licenseAllocated Integer32 } licenseInfoIdx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The license index." ::= { agLicenseInfoTableEntry 1 } softwareKey OBJECT-TYPE SYNTAX DisplayString(SIZE(0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Sofware Key." ::= { agLicenseInfoTableEntry 2 } licenseType OBJECT-TYPE SYNTAX INTEGER { permanent(1), temporary(2), removed(3), expired(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The License Type information." ::= { agLicenseInfoTableEntry 3 } remainingDays OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of days left for temporary license." ::= { agLicenseInfoTableEntry 4 } remainingDaysLeft OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of days/hours left for temporary license." ::= { agLicenseInfoTableEntry 5 } licenseSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The available size of license. Value -1 defines unlimited license." ::= { agLicenseInfoTableEntry 6 } licenseAllocated OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The totally allocated license to vADC's. Value -1 defines unlimited license" ::= { agLicenseInfoTableEntry 7 } agLicenseInfoConvStatus OBJECT-TYPE SYNTAX INTEGER { licConvDone(0), licCookieConvPending(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when read, gives the information to the user whether auto conversion is needed or not." ::= { agLicenseInfo 2 } agLicenseCapacityInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AgLicenseCapacityInfoTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of license Capacity Information." ::= { agLicenseInfo 3 } agLicenseCapacityInfoTableEntry OBJECT-TYPE SYNTAX AgLicenseCapacityInfoTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the license Capacity Information table." INDEX { licenseCapacityInfoIdx } ::= { agLicenseCapacityInfoTable 1 } AgLicenseCapacityInfoTableEntry ::= SEQUENCE { licenseCapacityInfoIdx Integer32, licenseCapacitySize Integer32, licenseCapacityAllocated Integer32 } licenseCapacityInfoIdx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The capacity license table index." ::= { agLicenseCapacityInfoTableEntry 1 } licenseCapacitySize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The available size of license. Value -1 defines unlimited license" ::= { agLicenseCapacityInfoTableEntry 2 } licenseCapacityAllocated OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The totally allocated license to vADC's. Value -1 defines unlimited license" ::= { agLicenseCapacityInfoTableEntry 3 } licenseKey OBJECT-TYPE SYNTAX DisplayString(SIZE(0..108)) MAX-ACCESS read-write STATUS current DESCRIPTION "Current License key." ::= {agLicenseOper 1} licenseDelete OBJECT-TYPE SYNTAX INTEGER { deleteGlobal(1), deleteBwm(2), deleteSecurity(4), deleteLlb(5), deleteItm(6), deleteCookie(7), deleteSymantec(8), deleteSlb(9), other(10), deleteServices(11), deletevADC(12) } MAX-ACCESS read-create STATUS current DESCRIPTION "This is an action object to delete specific feature license other(10) is returned always when read." ::= {agLicenseOper 2} automaticConvType OBJECT-TYPE SYNTAX INTEGER { other(1), automatic(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "License- Conversion type Automatic." ::= {agLicenseOper 3} automaticConvStatus OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Automatic License Conversion status." ::= {agLicenseOper 4} throPutLicenseKey OBJECT-TYPE SYNTAX DisplayString(SIZE(0..108)) MAX-ACCESS read-only STATUS current DESCRIPTION "Throughput License key." ::= {agLicenseOper 5 } sslLicenseKey OBJECT-TYPE SYNTAX DisplayString(SIZE(0..108)) MAX-ACCESS read-only STATUS current DESCRIPTION "SSL License key." ::= {agLicenseOper 6 } compressionLicenseKey OBJECT-TYPE SYNTAX DisplayString(SIZE(0..108)) MAX-ACCESS read-only STATUS current DESCRIPTION "Compression License key." ::= {agLicenseOper 7 } vADCLicenseKey OBJECT-TYPE SYNTAX DisplayString(SIZE(1..108)) MAX-ACCESS read-only STATUS current DESCRIPTION "vADC License key." ::= {agLicenseOper 9 } agUserNewPasswdOper OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Enter New User Password." ::= { agUserPasswdOper 1 } --IP ACL Oper agSecIpAclOperAdd OBJECT IDENTIFIER ::= { agSecIpAclOper 1 } agSecIpAclOperRem OBJECT IDENTIFIER ::= { agSecIpAclOper 2 } agSecIpAclOperRemAll OBJECT-TYPE SYNTAX INTEGER { ok(1), remove(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to Remove all operations source IP Address/Mask. When set to a value of remove(2) it removes All source IPACL entries. ok(1) is returned when the object is read." ::= { agSecIpAclOper 3 } agSecIpAclOperDestAdd OBJECT IDENTIFIER ::= { agSecIpAclOper 4 } agSecIpAclOperDestRem OBJECT IDENTIFIER ::= { agSecIpAclOper 5 } agSecIpAclOperDestRemAll OBJECT-TYPE SYNTAX INTEGER { ok(1), remove(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to Remove all destination IP Address/Mask. When set to a value of remove(2) it removes All destination IPACL entries. ok(1) is returned when the object is read." ::= { agSecIpAclOper 6 } agSecIpAclOperList OBJECT IDENTIFIER ::= { agSecIpAclOper 7 } agSecIpAclOperAddSrcIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Add IP ACL source IP Address" ::= { agSecIpAclOperAdd 1 } agSecIpAclOperAddMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Add IP ACL source Netmask." ::= { agSecIpAclOperAdd 2 } agSecIpAclOperAddTimeOut OBJECT-TYPE SYNTAX INTEGER (1..10080) MAX-ACCESS read-write STATUS current DESCRIPTION "timeout in minutes" ::= { agSecIpAclOperAdd 3 } agSecIpAclOperAddIp OBJECT-TYPE SYNTAX INTEGER { ok(1), add(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object ,when set to a value of add(2), it Add operations source IP Address/Mask.Ok(1) is returned when object is read." ::= { agSecIpAclOperAdd 4 } agSecIpAclOperRemIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Enter source IP Address for Remove operations" ::= { agSecIpAclOperRem 1 } agSecIpAclOperRemMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Enter source Netmask for Remove operations." ::= { agSecIpAclOperRem 2 } agSecIpAclOperRemove OBJECT-TYPE SYNTAX INTEGER { ok(1), remove(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object ,when set to a value of remove(2), it Remove operations source IP Address/Mask. Ok(1) is returned when object is read." ::= { agSecIpAclOperRem 3 } agSecIpAclOperDestAddIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Add IP ACL Operations destination IP Address" ::= { agSecIpAclOperDestAdd 1 } agSecIpAclOperDestAddMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Add IP ACL Operations destination Netmask." ::= { agSecIpAclOperDestAdd 2 } agSecIpAclOperDestAddTimeOut OBJECT-TYPE SYNTAX INTEGER (1..10080) MAX-ACCESS read-write STATUS current DESCRIPTION "destination timeout in minutes" ::= { agSecIpAclOperDestAdd 3 } agSecIpAclOperDestAddIp OBJECT-TYPE SYNTAX INTEGER { ok(1), add(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object ,when set to a value of add(2), it Add operations destination IP Address/Mask.Ok(1) is returned when object is read." ::= { agSecIpAclOperDestAdd 4 } agSecIpAclOperDestRemIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Enter destination IP Address for Remove operations" ::= { agSecIpAclOperDestRem 1 } agSecIpAclOperDestRemMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Enter destination IP Netmask for Remove operations." ::= { agSecIpAclOperDestRem 2 } agSecIpAclOperDestRemove OBJECT-TYPE SYNTAX INTEGER { ok(1), remove(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object ,when set to a value of add(2), it remove operations destination IP Address/Mask. Ok(1) is returned when object is read." ::= { agSecIpAclOperDestRem 4 } agSecIpAclOperListSumm OBJECT IDENTIFIER ::= { agSecIpAclOperList 1 } agSecIpAclOperListSummCfgSrc OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Configuration source IP ACL Summary." ::= { agSecIpAclOperListSumm 1 } agSecIpAclOperListSummCfgDst OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Configuration Destination IP ACL Summary." ::= { agSecIpAclOperListSumm 2 } agSecIpAclOperListSummOperSrc OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Operations source IP ACL Summary." ::= { agSecIpAclOperListSumm 3 } agSecIpAclOperListSummOperDst OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Operations Destination IP ACL Summary." ::= { agSecIpAclOperListSumm 4 } agSecIpAclOperListSummBogonSrc OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bogon source IP ACL Summary." ::= { agSecIpAclOperListSumm 5 } agSecIpAclOperListSummTotSrc OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total source IP ACL Summary." ::= { agSecIpAclOperListSumm 6 } agSecIpAclOperListSummTotDst OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Destination IP ACL Summary." ::= { agSecIpAclOperListSumm 7 } --Ip Acl Oper Src Ip Table agSecIpAclOperSrcTable OBJECT-TYPE SYNTAX SEQUENCE OF AgSecIpAclOperListSrcTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP ACL Oper Config Source Ip." ::= { agSecIpAclOperList 2 } agSecIpAclOperSrcTableEntry OBJECT-TYPE SYNTAX AgSecIpAclOperListSrcTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the agSecIpAclOperSrcTable table." INDEX { agSecIpAclOperListSrcIndx } ::= { agSecIpAclOperSrcTable 1 } AgSecIpAclOperListSrcTableEntry ::= SEQUENCE { agSecIpAclOperListSrcIndx Integer32, agSecIpAclOperListSrcAddr IpAddress, agSecIpAclOperListSrcMask IpAddress, agSecIpAclOperListSrcTimeOut Integer32 } agSecIpAclOperListSrcIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IP ACL Oper Config Source Group index." ::= { agSecIpAclOperSrcTableEntry 1 } agSecIpAclOperListSrcAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Oper IP ACL Config Source IP Address." ::= { agSecIpAclOperSrcTableEntry 2 } agSecIpAclOperListSrcMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Oper IP ACL Config Source NetMask." ::= { agSecIpAclOperSrcTableEntry 3 } agSecIpAclOperListSrcTimeOut OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Config Source Ip Timeout." ::= { agSecIpAclOperSrcTableEntry 4 } --Ip ACL Oper Destination IP Table agSecIpAclOperDstTable OBJECT-TYPE SYNTAX SEQUENCE OF AgSecIpAclOperDstTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Operations Source IP ACL." ::= { agSecIpAclOperList 3 } agSecIpAclOperDstTableEntry OBJECT-TYPE SYNTAX AgSecIpAclOperDstTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the agSecIpAclOperDstTable table." INDEX { agSecIpAclOperDstIndx } ::= { agSecIpAclOperDstTable 1 } AgSecIpAclOperDstTableEntry ::= SEQUENCE { agSecIpAclOperDstIndx Integer32, agSecIpAclOperDstAddr IpAddress, agSecIpAclOperDstMask IpAddress, agSecIpAclOperDstTimeout Integer32 } agSecIpAclOperDstIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IP ACL Oper Destination IP Group index." ::= { agSecIpAclOperDstTableEntry 1 } agSecIpAclOperDstAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP ACL Operations Destination IP Address." ::= { agSecIpAclOperDstTableEntry 2 } agSecIpAclOperDstMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP ACL Operations Destination NetMask." ::= { agSecIpAclOperDstTableEntry 3 } agSecIpAclOperDstTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "IP ACL Operations Destination Ip Timeout." ::= { agSecIpAclOperDstTableEntry 4 } --Displaying syslog messages to telnet/ssh sessions agSyslogOperDispLog OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This an action object which is used to enable/disable displaying syslog messages to telnet/ssh sessions." ::= { agSyslogOper 1 } -- Port operation table agPortOperTable OBJECT-TYPE SYNTAX SEQUENCE OF AgPortOperTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of port operations." ::= { agentOper 1 } agPortOperTableEntry OBJECT-TYPE SYNTAX AgPortOperTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the port operations table." INDEX { portOperIdx } ::= { agPortOperTable 1 } AgPortOperTableEntry ::= SEQUENCE { portOperIdx Integer32, portOperRmon INTEGER, portOperState INTEGER } portOperIdx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port index." ::= { agPortOperTableEntry 1 } portOperState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable port." ::= { agPortOperTableEntry 2 } portOperRmon OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable RMON for port." ::= { agPortOperTableEntry 3 } agClearAppLog OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object.When set to a value of clear(2) application services trace Logs will be cleared. ok(1) is returned when read." ::= { agentOper 7 } ntpOperSendReq OBJECT-TYPE SYNTAX INTEGER { no(1), yes(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the user to send requests to the NTP server." ::= { agNTPOper 1 } agPeerSyncConfigOper OBJECT-TYPE SYNTAX INTEGER { other(1), sync(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the user to send oper sync requests." ::= { agPeerSyncOper 1 } -- Port information table portInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF PortInfoTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of port information." ::= { portInfo 1 } portInfoTableEntry OBJECT-TYPE SYNTAX PortInfoTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the port information table." INDEX { portInfoIndx } ::= { portInfoTable 1 } PortInfoTableEntry ::= SEQUENCE { portInfoIndx Integer32, portInfoSpeed INTEGER, portInfoMode INTEGER, portInfoFlowCtrl INTEGER, portInfoLink INTEGER, portInfoPhyIfDescr DisplayString, portInfoPhyIfType INTEGER, portInfoPhyIfMtu Integer32, portInfoPhyIfPhysAddress PhysAddress, portInfoPhyIfOperStatus INTEGER, portInfoPhyIfLastChange TimeTicks, portInfoPhyConnType INTEGER, portInfoPreferred INTEGER, portInfoBackup INTEGER, portInfoSFPName DisplayString, portInfoSFPType INTEGER, portInfoShared INTEGER, portInfoVADC INTEGER } portInfoIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port index." ::= { portInfoTableEntry 1 } portInfoSpeed OBJECT-TYPE SYNTAX INTEGER { mbs10(2), mbs100(3), mbs1000(4), any(5) ,mbs10000(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational speed of the port." ::= { portInfoTableEntry 2 } portInfoMode OBJECT-TYPE SYNTAX INTEGER { full-duplex(2), half-duplex(3), any(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational mode of the port." ::= { portInfoTableEntry 3 } portInfoFlowCtrl OBJECT-TYPE SYNTAX INTEGER { transmit(2), receive(3), both(4), none(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational flow control of the port." ::= { portInfoTableEntry 4 } portInfoLink OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), disabled(3), inoperative(4) -- unrecognized PCI device } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational link status of the port." ::= { portInfoTableEntry 5 } portInfoPhyIfDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface." ::= { portInfoTableEntry 6 } portInfoPhyIfType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following regular1822(2), hdh1822(3), ddn-x25(4), rfc877-x25(5), ethernet-csmacd(6), iso88023-csmacd(7), iso88024-tokenBus(8), iso88025-tokenRing(9), iso88026-man(10), starLan(11), proteon-10Mbit(12), proteon-80Mbit(13), hyperchannel(14), fddi(15), lapb(16), sdlc(17), ds1(18), -- T-1 e1(19), -- european equiv. of T-1 basicISDN(20), primaryISDN(21), -- proprietary serial propPointToPointSerial(22), ppp(23), softwareLoopback(24), eon(25), -- CLNP over IP [11] ethernet-3Mbit(26), nsip(27), -- XNS over IP slip(28), -- generic SLIP ultra(29), -- ULTRA technologies ds3(30), -- T-3 sip(31), -- SMDS frame-relay(32) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack." ::= { portInfoTableEntry 7 } portInfoPhyIfMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface." ::= { portInfoTableEntry 8 } portInfoPhyIfPhysAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length." ::= { portInfoTableEntry 9 } portInfoPhyIfOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready to pass packets down(2), testing(3) -- in some test mode } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed." ::= { portInfoTableEntry 10 } portInfoPhyIfLastChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value." ::= { portInfoTableEntry 11 } portInfoPhyConnType OBJECT-TYPE SYNTAX INTEGER { feCopper(1), geCopper(2), geSFP(3), unknown(4), xGeSFP(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The physical connection type, i.e. copper or SFP port." ::= { portInfoTableEntry 12 } portInfoPreferred OBJECT-TYPE SYNTAX INTEGER { invalid(1), copper(2), sfp(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The port preferred connection type. For dual ports only" ::= { portInfoTableEntry 13 } portInfoBackup OBJECT-TYPE SYNTAX INTEGER { invalid(1), none(2), copper(3), sfp(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The port backup setting. For dual ports only" ::= { portInfoTableEntry 14 } portInfoSFPName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing information about the SFP manufacturer. For valid ports only." ::= { portInfoTableEntry 15 } portInfoSFPType OBJECT-TYPE SYNTAX INTEGER { invalid(1), sfpTypeSX(2), sfpTypeLX(3), sfpTypeCX(4), sfpTypeCopper(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The inserted SFP type. For valid ports only." ::= { portInfoTableEntry 17 } portInfoShared OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the port is shared or not." ::= { portInfoTableEntry 18 } portInfoVADC OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " The vADC number that the port belongs to." ::= { portInfoTableEntry 19 } agEnabledSwFeatures OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The software features that are enabled on the switch." ::= { swKeyInfo 1 } agEnabledGslbKey OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Query if software key Global slb enabled on switch." ::= { swKeyInfo 2 } agEnabledBwmKey OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Query if software key Bandwidth Mgmt. enabled on switch." ::= { swKeyInfo 3 } agEnabledSecurityKey OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Query if software key Security enabled on switch." ::= { swKeyInfo 4 } agEnabledLinklbKey OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Query if software key Inbound Linklb is enabled on switch." ::= { swKeyInfo 6 } -- Agent System Group -- This group of objects take effect on the 'SET' request. -- There is no need to 'apply' or 'save'. agApplyConfiguration OBJECT-TYPE SYNTAX INTEGER { other(1), apply(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply are written to the new_config block. other(1) is returned when this object ie read. " ::= { agSystem 2 } agSavePending OBJECT-TYPE SYNTAX INTEGER { saveNeeded(1), noSaveNeeded(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash." ::= { agSystem 3 } agSaveConfiguration OBJECT-TYPE SYNTAX INTEGER { ok(1), saveActive(2), notSaveActive(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to backup in flash and then the new configuration is saved to the active configuration in flash. When issued with notSaveActive, the active configuration is NOT saved to the flash and the active configuration is overwritten with the new configuration. ok(1) is returned always when read." ::= { agSystem 4 } agRevert OBJECT-TYPE SYNTAX INTEGER { other(1), revert(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied changes will be reverted. This action will copy the current_config to the new_config block. other(1) is returned when this object is read. " ::= { agSystem 5 } agRevertApply OBJECT-TYPE SYNTAX INTEGER { other(1), revertApply(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes will be reverted. other(1) is returned when this object is read. " ::= { agSystem 6 } agReset OBJECT-TYPE SYNTAX INTEGER { other(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to reboot the agent. other(1) is returned always when read." ::= { agSystem 7 } agConfigForNxtReset OBJECT-TYPE SYNTAX INTEGER { active(2), backup(3), default(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuration block backup(3)...backup configuration block default(4)..default configuration block" ::= { agSystem 8 } agImageForNxtReset OBJECT-TYPE SYNTAX INTEGER (2..11) MAX-ACCESS read-write STATUS current DESCRIPTION "The software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2 ..." ::= { agSystem 9 } agSoftwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if version is not available." ::= { agSystem 10 } agBootVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available." ::= { agSystem 11 } agImage1Ver OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image." ::= { agSystem 12 } agImage2Ver OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image." ::= { agSystem 13 } agRtcDate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available." ::= { agSystem 14 } agRtcTime OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available." ::= { agSystem 15 } agLastSetErrorReason OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The error reason of the last SET failure." ::= { agSystem 16 } agCurCfgHttpServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The TCP port number that the HTTP server is listening to in the current_configuration block." ::= { agSystem 17 } agNewCfgHttpServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP port number that the HTTP server is listening to in the new_configuration block." ::= { agSystem 18 } agCurCfgLoginBanner OBJECT-TYPE SYNTAX DisplayString (SIZE(0..79)) MAX-ACCESS read-only STATUS current DESCRIPTION "The user defined login banner." ::= { agSystem 19 } agNewCfgLoginBanner OBJECT-TYPE SYNTAX DisplayString (SIZE(0..79)) MAX-ACCESS read-write STATUS current DESCRIPTION "The user defined login banner." ::= { agSystem 20 } agCurCfgSmtpHost OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "The user defined SMTP host." ::= { agSystem 21 } agNewCfgSmtpHost OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "The user defined SMTP host. If it is a host name than please configure agNewCfgSmtpHostIPVersion. By default IPv4 version will be choosen. If IPv4 or Ipv6 address is configured than no need to configure agNewCfgSmtpHostIPVersion, this will be filled accordingly. " ::= { agSystem 22 } agCurCfgConsole OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable console output of syslog messages." ::= { agSystem 23 } agNewCfgConsole OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable console output of syslog messages." ::= { agSystem 24 } agCurCfgBootp OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the use of BootP, as currently configured in the current_configuration block." ::= { agSystem 29 } agNewCfgBootp OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the use of BootP, in the new_configuration block." ::= { agSystem 30 } agCurCfgSnmpTimeout OBJECT-TYPE SYNTAX INTEGER (1..30) MAX-ACCESS read-only STATUS current DESCRIPTION "Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user." ::= { agSystem 32 } agNewCfgSnmpTimeout OBJECT-TYPE SYNTAX INTEGER (1..30) MAX-ACCESS read-write STATUS current DESCRIPTION "Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user." ::= { agSystem 33 } agCurCfgTelnetServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The TCP port number that the telnet server listens for telnet sessions." ::= { agSystem 34 } agNewCfgTelnetServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP port number that the telnet server listens for telnet sessions." ::= { agSystem 35 } agClearFlashDump OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to clear the FLASH dump. ok(1) is returned when this object is read. " ::= { agSystem 36 } agCurCfgTrapSrcIf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SNMP trap source interface number." ::= { agSystem 39 } agNewCfgTrapSrcIf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP trap source interface number." ::= { agSystem 40 } agCurCfgARPMaxRate OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum allowed rate of MP-destined ARP packets." ::= { agSystem 41 } agNewCfgARPMaxRate OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum allowed rate of MP-destined ARP packets." ::= { agSystem 42 } agCurCfgICMPMaxRate OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum allowed rate of MP-destined ICMP packets." ::= { agSystem 43 } agNewCfgICMPMaxRate OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum allowed rate of MP-destined ICMP packets." ::= { agSystem 44 } agCurCfgTCPMaxRate OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum allowed rate of MP-destined TCP packets." ::= { agSystem 45 } agNewCfgTCPMaxRate OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum allowed rate of MP-destined TCP packets." ::= { agSystem 46 } agCurCfgUDPMaxRate OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum allowed rate of MP-destined UDP packets." ::= { agSystem 47 } agNewCfgUDPMaxRate OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum allowed rate of MP-destined UDP packets." ::= { agSystem 48 } agCurCfgHttpsServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The TCP port number that the HTTPS server is listening to in the current_configuration block." ::= { agSystem 49 } agNewCfgHttpsServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP port number that the HTTPS server is listening to in the new_configuration block." ::= { agSystem 50 } agCurDaylightSavings OBJECT-TYPE SYNTAX INTEGER { none(0), africa-Algeria(1), africa-Angola(2), africa-Benin(3), africa-Botswana(4), africa-Burkina-Faso(5), africa-Burundi(6), africa-Cameroon(7), africa-Central-African-Rep(8), africa-Chad(9), africa-Congo-WestDemRepCongo(10), africa-Congo-EastDemRepCongo(11), africa-Congo-Rep(12), africa-Cote-dIvoire(13), africa-Djibouti(14), africa-Egypt(15), africa-Equatorial-Guinea(16), africa-Eritrea(17), africa-Ethiopia(18), africa-Gabon(19), africa-Gambia(20), africa-Ghana(21), africa-Guinea(22), africa-Guinea-Bissau(23), africa-Kenya(24), africa-Lesotho(25), africa-Liberia(26), africa-Libya(27), africa-Malawi(28), africa-Mali-SouthWestMali(29), africa-Mali-NorthEastMali(30), africa-Mauritania(31), africa-Morocco(32), africa-Mozambique(33), africa-Namibia(34), africa-Niger(35), africa-Nigeria(36), africa-Rwanda(37), africa-SaoTome-And-Principe(38), africa-Senegal(39), africa-SierraLeone(40), africa-Somalia(41), africa-SouthAfrica(42), africa-Spain-Mainland(43), africa-Spain-CeutaMelilla(44), africa-Spain-CanaryIslands(45), africa-Sudan(46), africa-Swaziland(47), africa-Tanzania(48), africa-Togo(49), africa-Tunisia(50), africa-Uganda(51), africa-Western-Sahara(52), africa-Zambia(53), africa-Zimbabwe(54), americas-Anguilla(55), americas-Antigua-Barbuda(56), americas-Argentina-EArgentina(57), americas-Argentina-MostLocations(58), americas-Argentina-Jujuy(59), americas-Argentina-Catamarca(60), americas-Argentina-Mendoza(61), americas-Aruba(62), americas-Bahamas(63), americas-Barbados(64), americas-Belize(65), americas-Bolivia(66), americas-Brazil-AtlanticIslands(67), americas-Brazil-AmapaEPara(68), americas-Brazil-NEBrazil(69), americas-Brazil-Pernambuco(70), americas-Brazil-Tocantins(71), americas-Brazil-AlagoasSergipe(72), americas-Brazil-SSEBrazil(73), americas-Brazil-MatoGrossoDoSul(74), americas-Brazil-WParaRondonia(75), americas-Brazil-Roraima(76), americas-Brazil-EAmazonas(77), americas-Brazil-WAmazonas(78), americas-Brazil-Acre(79), americas-Canada-NewfoundlandIsland(80), americas-Canada-AtlanTime-NovaScotia(81), americas-Canada-AtlanTime-ELabrador(82), americas-Canada-EastTime-OntarioMostlocation(83), americas-Canada-EastTime-ThunderBay(84), americas-Canada-EastStdTime-PangnirtungNunavut(85), americas-Canada-EastStdTime-EastNunavut(86), americas-Canada-EastStdTime-CenNunavut(87), americas-Canada-CenTime-ManitobaWestOntario(88), americas-Canada-CenTime-RainyRiver(89), americas-Canada-CenTime-WestNunavut(90), americas-Canada-CenStdTime-SaskatchewanMostlocation(91), americas-Canada-CenStdTime-SaskatchewanMidwest(92), americas-Canada-MountTime-AlbertaEastBritishColumbia(93), americas-Canada-MountTime-CentralNorthwestTerritories(94), americas-Canada-MountTime-WestNorthwestTerritories(95), americas-Canada-MountStdTime-DawsonCrkStJohnBritColumbia(96), americas-Canada-PacificTime-WestBritishColumbia(97), americas-Canada-PacificTime-SouthYukon(98), americas-Canada-PacificTime-NorthYukon(99), americas-CaymanIslands(100), americas-Chile-MostLocation(101), americas-Chile-EasterIsland(102), americas-Colombia(103), americas-CostaRica(104), americas-Cuba(105), americas-Dominica(106), americas-DominicanRepublic (107), americas-Ecuador(108), americas-ElSalvado(109), americas-FrenchGuiana(110), americas-Greenland-MostLocation(111), americas-Greenland-EastCoastNorthScoresbysund(112), americas-Greenland-ScoresbysundIttoqqortoormiit(113), americas-Greenland-ThulePituffik(114), americas-Grenada(115), americas-Guadeloupe(116), americas-Guatemala(117), americas-Guyana(118), americas-Haiti(119), americas-Honduras(120), americas-Jamaica(121), americas-Martinique(122), americas-Mexico-CentTime-Mostlocations(123), americas-Mexico-CentTime-QuintanaRoo(124), americas-Mexico-CentTime-CampecheYucatan(125), americas-Mexico-CTime-CoahuilaDurangoNuevoLeonTamaulipas(126), americas-Mexico-MountTime-SBajaNayaritSinaloa(127), americas-Mexico-MountTime-Chihuahua(128), americas-Mexico-MountStdTime-Sonora(129), americas-Mexico-PacificTime(130), americas-Montserrat(131), americas-NetherlandsAntilles(132), americas-Nicaragua(133), americas-Panama(134), americas-Paraguay(135), americas-Peru(136), americas-PuertoRico(137), americas-StKittsAndNevis(138), americas-StLucia(139), americas-StPierreAndMiquelon(140), americas-StVincent(141), americas-Suriname(142), americas-TrinidadAndTobago(143), americas-TurksAndCaicosIs(144), americas-USA-EastTime(145), americas-USA-EastTime-MichiganMostLocation(146), americas-USA-EastTime-KentuckyLouisvilleArea(147), americas-USA-EastTime-KentuckyWayneCounty(148), americas-USA-EastStdTime-IndianaMostLocations(149), americas-USA-EastStdTime-IndianaCrawfordCounty(150), americas-USA-EastStdTime-IndianaStarkeCounty(151), americas-USA-EastStdTime-IndianaSwitzerlandCounty(152), americas-USA-CentTime(153), americas-USA-CentTime-MichiganWisconsinborder(154), americas-USA-CentTime-NorthDakotaOliverCounty(155), americas-USA-MountTime(156), americas-USA-MountTime-SouthIdahoAndEastOregon(157), americas-USA-MountTime-Navajo(158), americas-USA-MountStdTime-Arizona(159), americas-USA-PacificTime(160), americas-USA-AlaskaTime(161), americas-USA-AlaskaTime-AlaskaPanhandle(162), americas-USA-AlaskaTime-AlaskaPanhandleNeck(163), americas-USA-AlaskaTime-WestAlaska(164), americas-USA-AleutianIslands(165), americas-USA-Hawaii(166), americas-Uruguay(167), americas-Venezuela(168), americas-VirginIslands-UK(169), americas-VirginIslands-US(170), antarctica-McMurdoStationRossIsland(171), antarctica-Amundsen-ScottStationSouthPole(172), antarctica-PalmerStationAnversIsland(173), antarctica-MawsonStationHolmeBay(174), antarctica-DavisStationVestfoldHills(175), antarctica-CaseyStationBaileyPeninsula(176), antarctica-VostokStationSMagneticPole(177), antarctica-Dumont-dUrvilleBaseTerreAdelie(178), antarctica-SyowaStationEOngulI(179), arcticOcean-Svalbard(180), arcticOcean-JanMayen(181), asia-Afghanistan(182), asia-Armenia(183), asia-Azerbaijan(184), asia-Bahrain(185), asia-Bangladesh(186), asia-Bhutan(187), asia-Brunei(188), asia-Cambodia(189), asia-China-EastChinaBeijingGuangdongShanghai(190), asia-China-Heilongjiang(191), asia-China-CentralChinaGansuGuizhouSichuanYunnan(192), asia-China-TibetmostofXinjiangUyghur(193), asia-China-SouthwestXinjiangUyghur(194), asia-Cyprus(195), asia-EastTimor(196), asia-Georgia(197), asia-HongKong(198), asia-India(199), asia-Indonesia-JavaAndSumatra(200), asia-Indonesia-WestCentralBorneo(201), asia-Indonesia-EstSthBorneoCelebsBaliNusaTengaraWstTimor(202), asia-Indonesia-IrianJayaAndMoluccas(203), asia-Iran(204), asia-Iraq(205), asia-Israel(206), asia-Japan(207), asia-Jordan(208), asia-Kazakhstan-MostLocations(209), asia-Kazakhstan-QyzylordaKyzylorda(210), asia-Kazakhstan-Aqtobe(211), asia-Kazakhstan-AtyrauMangghystau(212), asia-Kazakhstan-WestKazakhstan(213), asia-Korea-North(214), asia-Korea-South(215), asia-Kuwait(216), asia-Kyrgyzstan(217), asia-Laos(218), asia-Lebanon(219), asia-Macau(220), asia-Malaysia-PeninsularMalaysia(221), asia-Malaysia-SabahSarawak(222), asia-Mongolia-MostLocations(223), asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan(224), asia-Mongolia-DornodSukhbaatar(225), asia-Myanmar(226), asia-Nepal(227), asia-Oman(228), asia-Pakistan(229), asia-Palestine(230), asia-Philippines(231), asia-Qatar(232), asia-Russia-Moscow-01Kaliningrad(233), asia-Russia-Moscow00WestRussia(234), asia-Russia-Moscow01CaspianSea(235), asia-Russia-Moscow02Urals(236), asia-Russia-Moscow03WestSiberia(237), asia-Russia-Moscow03Novosibirsk(238), asia-Russia-Moscow04YeniseiRiver(239), asia-Russia-Moscow05LakeBaikal(240), asia-Russia-Moscow06LenaRiver(241), asia-Russia-Moscow07AmurRiver(242), asia-Russia-Moscow07SakhalinIsland(243), asia-Russia-Moscow08Magadan(244), asia-Russia-Moscow09Kamchatka(245), asia-Russia-Moscow10BeringSea(246), asia-SaudiArabia(247), asia-Singapore(248), asia-SriLanka(249), asia-Syria(250), asia-Taiwan(251), asia-Tajikistan(252), asia-Thailand(253), asia-Turkmenistan(254), asia-UnitedArabEmirates(255), asia-Uzbekistan-WestUzbekistan(256), asia-Uzbekistan-EastUzbekistan(257), asia-Vietnam(258), asia-Yemen(259), atlanticOcean-Bermuda(260), atlanticOcean-CapeVerde(261), atlanticOcean-FaeroeIslands(262), atlanticOcean-FalklandIslands(263), atlanticOcean-Iceland(264), atlanticOcean-Portugal-Mainland(265), atlanticOcean-Portugal-MadeiraIslands(266), atlanticOcean-Portugal-Azores(267), atlanticOcean-SouthGeorgia-SouthSandwichIslands(268), atlanticOcean-Spain-Mainland(269), atlanticOcean-Spain-CeutaMelilla(270), atlanticOcean-Spain-CanaryIslands(271), atlanticOcean-StHelena(272), atlanticOcean-Svalbard-JanMayen(273), australia-LordHoweIsland(274), australia-Tasmania(275), australia-Victoria(276), australia-NewSouthWales-MostLocations(277), australia-NewSouthWales-Yancowinna(278), australia-Queensland-MostLocations(279), australia-Queensland-HolidayIslands(280), australia-SouthAustralia(281), australia-NorthernTerritory(282), australia-WesternAustralia(283), europe-Albania(284), europe-Andorra(285), europe-Austria(286), europe-Belarus(287), europe-Belgium(288), europe-BosniaHerzegovina(289), europe-Britain-UKGreatBritain(290), europe-Britain-UKNorthernIreland(291), europe-Bulgaria(292), europe-Croatia(293), europe-CzechRepublic(294), europe-Denmark(295), europe-Estonia(296), europe-Finland(297), europe-France(298), europe-Germany(299), europe-Gibraltar(300), europe-Greece(301), europe-Hungary(302), europe-Ireland(303), europe-Italy(304), europe-Latvia(305), europe-Liechtenstein(306), europe-Lithuania(307), europe-Luxembourg(308), europe-Macedonia(309), europe-Malta(310), europe-Moldova(311), europe-Monaco(312), europe-Netherlands(313), europe-Norway(314), europe-Poland(315), europe-Portugal-Mainland(316), europe-Portugal-MadeiraIslands(317), europe-Portugal-Azores(318), europe-Romania(319), europe-Russia-Moscow-01Kaliningrad(320), europe-Russia-Moscow00WestRussia(321), europe-Russia-Moscow01CaspianSea(322), europe-Russia-Moscow02Urals(323), europe-Russia-Moscow03WestSiberia(324), europe-Russia-Moscow03Novosibirsk(325), europe-Russia-Moscow04YeniseiRiver(326), europe-Russia-Moscow05LakeBaikal(327), europe-Russia-Moscow06LenaRiver(328), europe-Russia-Moscow07AmurRiver(329), europe-Russia-Moscow07SakhalinIsland(330), europe-Russia-Moscow08Magadan(331), europe-Russia-Moscow09Kamchatka(332), europe-Russia-Moscow10BeringSea(333), europe-SanMarino(334), europe-Slovakia(335), europe-Slovenia(336), europe-Spain-Mainland(337), europe-Spain-CeutaAndMelilla(338), europe-Spain-CanaryIslands(339), europe-Sweden(340), europe-Switzerland(341), europe-Turkey(342), europe-Ukraine-MostLocations(343), europe-Ukraine-Ruthenia(344), europe-Ukraine-Zaporozhye-ELugansk(345), europe-Ukraine-CentralCrimea(346), europe-VaticanCity(347), europe-Yugoslavia(348), indianOcean-BritishIndianOceanTerritory(349), indianOcean-ChristmasIsland(350), indianOcean-CocosOrKeelingIslands(351), indianOcean-Comoros(352), indianOcean-FrenchSouthernAndAntarcticLands(353), indianOcean-Madagascar(354), indianOcean-Maldives(355), indianOcean-Mauritius(356), indianOcean-Mayotte(357), indianOcean-Reunion(358), indianOcean-Seychelles(359), pacificOcean-Chile-MostLocations(360), pacificOcean-Chile-EasterIslandSalayGomez(361), pacificOcean-CookIslands(362), pacificOcean-Ecuador(363), pacificOcean-Fiji(364), pacificOcean-FrenchPolynesia-SocietyIslands(365), pacificOcean-FrenchPolynesia-MarquesasIslands(366), pacificOcean-FrenchPolynesia-GambierIslands(367), pacificOcean-Guam(368), pacificOcean-Kiribati-GilbertIslands(369), pacificOcean-Kiribati-PhoenixIslands(370), pacificOcean-Kiribati-LineIslands(371), pacificOcean-MarshallIslands-MostLocations(372), pacificOcean-MarshallIslands-Kwajalein(373), pacificOcean-Micronesia-Yap(374), pacificOcean-Micronesia-TrukOrChuuk(375), pacificOcean-Micronesia-PonapeOrPohnpei(376), pacificOcean-Micronesia-Kosrae(377), pacificOcean-Nauru(378), pacificOcean-NewCaledonia(379), pacificOcean-NewZealand-MostLocations(380), pacificOcean-NewZealand-ChathamIslands(381), pacificOcean-Niue(382), pacificOcean-NorfolkIsland(383), pacificOcean-NorthernMarianaIslands(384), pacificOcean-Palau(385), pacificOcean-PapuaNewGuinea(386), pacificOcean-Pitcairn(387), pacificOcean-SamoaAmerican(388), pacificOcean-SamoaWestern(389), pacificOcean-SolomonIslands(390), pacificOcean-Tokelau(391), pacificOcean-Tonga(392), pacificOcean-Tuvalu(393), pacificOceanUSA-EastTime(394), pacificOceanUSA-EastTime-MichiganMostLocations(395), pacificOceanUSA-EastTime-KentuckyLouisvilleArea(396), pacificOceanUSA-EastTime-KentuckyWayneCounty(397), pacificOceanUSA-EastStdTime-IndianaMostLocations(398), pacificOceanUSA-EastStdTime-IndianaCrawfordCounty(399), pacificOceanUSA-EastStdTime-IndianaStarkeCounty(400), pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty(401), pacificOceanUSA-CentTime(402), pacificOceanUSA-CentTime-MichiganWisconsinborder(403), pacificOceanUSA-CentTime-NorthDakotaOliverCounty(404), pacificOceanUSA-MountTime(405), pacificOceanUSA-MountTime-SouthIdahoAndEastOregon(406), pacificOceanUSA-MountTime-Navajo(407), pacificOceanUSA-MountStdTime-Arizona(408), pacificOceanUSA-PacificTime(409), pacificOceanUSA-AlaskaTime(410), pacificOceanUSA-AlaskaTime-AlaskaPanhandle(411), pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck(412), pacificOceanUSA-AlaskaTime-WestAlaska(413), pacificOceanUSA-AleutianIslands(414), pacificOceanUSA-Hawaii(415), pacificOcean-USMinorOutlyingIslands-JohnstonAtoll(416), pacificOcean-USMinorOutlyingIslands-MidwayIslands(417), pacificOcean-USMinorOutlyingIslands-WakeIsland(418), pacificOcean-Vanuatu(419), pacificOcean-WallisAndFutuna(420) } MAX-ACCESS read-only STATUS current DESCRIPTION "The daylight savings location." ::= { agSystem 55 } agNewDaylightSavings OBJECT-TYPE SYNTAX INTEGER { none(0), africa-Algeria(1), africa-Angola(2), africa-Benin(3), africa-Botswana(4), africa-Burkina-Faso(5), africa-Burundi(6), africa-Cameroon(7), africa-Central-African-Rep(8), africa-Chad(9), africa-Congo-WestDemRepCongo(10), africa-Congo-EastDemRepCongo(11), africa-Congo-Rep(12), africa-Cote-dIvoire(13), africa-Djibouti(14), africa-Egypt(15), africa-Equatorial-Guinea(16), africa-Eritrea(17), africa-Ethiopia(18), africa-Gabon(19), africa-Gambia(20), africa-Ghana(21), africa-Guinea(22), africa-Guinea-Bissau(23), africa-Kenya(24), africa-Lesotho(25), africa-Liberia(26), africa-Libya(27), africa-Malawi(28), africa-Mali-SouthWestMali(29), africa-Mali-NorthEastMali(30), africa-Mauritania(31), africa-Morocco(32), africa-Mozambique(33), africa-Namibia(34), africa-Niger(35), africa-Nigeria(36), africa-Rwanda(37), africa-SaoTome-And-Principe(38), africa-Senegal(39), africa-SierraLeone(40), africa-Somalia(41), africa-SouthAfrica(42), africa-Spain-Mainland(43), africa-Spain-CeutaMelilla(44), africa-Spain-CanaryIslands(45), africa-Sudan(46), africa-Swaziland(47), africa-Tanzania(48), africa-Togo(49), africa-Tunisia(50), africa-Uganda(51), africa-Western-Sahara(52), africa-Zambia(53), africa-Zimbabwe(54), americas-Anguilla(55), americas-Antigua-Barbuda(56), americas-Argentina-EArgentina(57), americas-Argentina-MostLocations(58), americas-Argentina-Jujuy(59), americas-Argentina-Catamarca(60), americas-Argentina-Mendoza(61), americas-Aruba(62), americas-Bahamas(63), americas-Barbados(64), americas-Belize(65), americas-Bolivia(66), americas-Brazil-AtlanticIslands(67), americas-Brazil-AmapaEPara(68), americas-Brazil-NEBrazil(69), americas-Brazil-Pernambuco(70), americas-Brazil-Tocantins(71), americas-Brazil-AlagoasSergipe(72), americas-Brazil-SSEBrazil(73), americas-Brazil-MatoGrossoDoSul(74), americas-Brazil-WParaRondonia(75), americas-Brazil-Roraima(76), americas-Brazil-EAmazonas(77), americas-Brazil-WAmazonas(78), americas-Brazil-Acre(79), americas-Canada-NewfoundlandIsland(80), americas-Canada-AtlanTime-NovaScotia(81), americas-Canada-AtlanTime-ELabrador(82), americas-Canada-EastTime-OntarioMostlocation(83), americas-Canada-EastTime-ThunderBay(84), americas-Canada-EastStdTime-PangnirtungNunavut(85), americas-Canada-EastStdTime-EastNunavut(86), americas-Canada-EastStdTime-CenNunavut(87), americas-Canada-CenTime-ManitobaWestOntario(88), americas-Canada-CenTime-RainyRiver(89), americas-Canada-CenTime-WestNunavut(90), americas-Canada-CenStdTime-SaskatchewanMostlocation(91), americas-Canada-CenStdTime-SaskatchewanMidwest(92), americas-Canada-MountTime-AlbertaEastBritishColumbia(93), americas-Canada-MountTime-CentralNorthwestTerritories(94), americas-Canada-MountTime-WestNorthwestTerritories(95), americas-Canada-MountStdTime-DawsonCrkStJohnBritColumbia(96), americas-Canada-PacificTime-WestBritishColumbia(97), americas-Canada-PacificTime-SouthYukon(98), americas-Canada-PacificTime-NorthYukon(99), americas-CaymanIslands(100), americas-Chile-MostLocation(101), americas-Chile-EasterIsland(102), americas-Colombia(103), americas-CostaRica(104), americas-Cuba(105), americas-Dominica(106), americas-DominicanRepublic (107), americas-Ecuador(108), americas-ElSalvado(109), americas-FrenchGuiana(110), americas-Greenland-MostLocation(111), americas-Greenland-EastCoastNorthScoresbysund(112), americas-Greenland-ScoresbysundIttoqqortoormiit(113), americas-Greenland-ThulePituffik(114), americas-Grenada(115), americas-Guadeloupe(116), americas-Guatemala(117), americas-Guyana(118), americas-Haiti(119), americas-Honduras(120), americas-Jamaica(121), americas-Martinique(122), americas-Mexico-CentTime-Mostlocations(123), americas-Mexico-CentTime-QuintanaRoo(124), americas-Mexico-CentTime-CampecheYucatan(125), americas-Mexico-CTime-CoahuilaDurangoNuevoLeonTamaulipas(126), americas-Mexico-MountTime-SBajaNayaritSinaloa(127), americas-Mexico-MountTime-Chihuahua(128), americas-Mexico-MountStdTime-Sonora(129), americas-Mexico-PacificTime(130), americas-Montserrat(131), americas-NetherlandsAntilles(132), americas-Nicaragua(133), americas-Panama(134), americas-Paraguay(135), americas-Peru(136), americas-PuertoRico(137), americas-StKittsAndNevis(138), americas-StLucia(139), americas-StPierreAndMiquelon(140), americas-StVincent(141), americas-Suriname(142), americas-TrinidadAndTobago(143), americas-TurksAndCaicosIs(144), americas-USA-EastTime(145), americas-USA-EastTime-MichiganMostLocation(146), americas-USA-EastTime-KentuckyLouisvilleArea(147), americas-USA-EastTime-KentuckyWayneCounty(148), americas-USA-EastStdTime-IndianaMostLocations(149), americas-USA-EastStdTime-IndianaCrawfordCounty(150), americas-USA-EastStdTime-IndianaStarkeCounty(151), americas-USA-EastStdTime-IndianaSwitzerlandCounty(152), americas-USA-CentTime(153), americas-USA-CentTime-MichiganWisconsinborder(154), americas-USA-CentTime-NorthDakotaOliverCounty(155), americas-USA-MountTime(156), americas-USA-MountTime-SouthIdahoAndEastOregon(157), americas-USA-MountTime-Navajo(158), americas-USA-MountStdTime-Arizona(159), americas-USA-PacificTime(160), americas-USA-AlaskaTime(161), americas-USA-AlaskaTime-AlaskaPanhandle(162), americas-USA-AlaskaTime-AlaskaPanhandleNeck(163), americas-USA-AlaskaTime-WestAlaska(164), americas-USA-AleutianIslands(165), americas-USA-Hawaii(166), americas-Uruguay(167), americas-Venezuela(168), americas-VirginIslands-UK(169), americas-VirginIslands-US(170), antarctica-McMurdoStationRossIsland(171), antarctica-Amundsen-ScottStationSouthPole(172), antarctica-PalmerStationAnversIsland(173), antarctica-MawsonStationHolmeBay(174), antarctica-DavisStationVestfoldHills(175), antarctica-CaseyStationBaileyPeninsula(176), antarctica-VostokStationSMagneticPole(177), antarctica-Dumont-dUrvilleBaseTerreAdelie(178), antarctica-SyowaStationEOngulI(179), arcticOcean-Svalbard(180), arcticOcean-JanMayen(181), asia-Afghanistan(182), asia-Armenia(183), asia-Azerbaijan(184), asia-Bahrain(185), asia-Bangladesh(186), asia-Bhutan(187), asia-Brunei(188), asia-Cambodia(189), asia-China-EastChinaBeijingGuangdongShanghai(190), asia-China-Heilongjiang(191), asia-China-CentralChinaGansuGuizhouSichuanYunnan(192), asia-China-TibetmostofXinjiangUyghur(193), asia-China-SouthwestXinjiangUyghur(194), asia-Cyprus(195), asia-EastTimor(196), asia-Georgia(197), asia-HongKong(198), asia-India(199), asia-Indonesia-JavaAndSumatra(200), asia-Indonesia-WestCentralBorneo(201), asia-Indonesia-EstSthBorneoCelebsBaliNusaTengaraWstTimor(202), asia-Indonesia-IrianJayaAndMoluccas(203), asia-Iran(204), asia-Iraq(205), asia-Israel(206), asia-Japan(207), asia-Jordan(208), asia-Kazakhstan-MostLocations(209), asia-Kazakhstan-QyzylordaKyzylorda(210), asia-Kazakhstan-Aqtobe(211), asia-Kazakhstan-AtyrauMangghystau(212), asia-Kazakhstan-WestKazakhstan(213), asia-Korea-North(214), asia-Korea-South(215), asia-Kuwait(216), asia-Kyrgyzstan(217), asia-Laos(218), asia-Lebanon(219), asia-Macau(220), asia-Malaysia-PeninsularMalaysia(221), asia-Malaysia-SabahSarawak(222), asia-Mongolia-MostLocations(223), asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan(224), asia-Mongolia-DornodSukhbaatar(225), asia-Myanmar(226), asia-Nepal(227), asia-Oman(228), asia-Pakistan(229), asia-Palestine(230), asia-Philippines(231), asia-Qatar(232), asia-Russia-Moscow-01Kaliningrad(233), asia-Russia-Moscow00WestRussia(234), asia-Russia-Moscow01CaspianSea(235), asia-Russia-Moscow02Urals(236), asia-Russia-Moscow03WestSiberia(237), asia-Russia-Moscow03Novosibirsk(238), asia-Russia-Moscow04YeniseiRiver(239), asia-Russia-Moscow05LakeBaikal(240), asia-Russia-Moscow06LenaRiver(241), asia-Russia-Moscow07AmurRiver(242), asia-Russia-Moscow07SakhalinIsland(243), asia-Russia-Moscow08Magadan(244), asia-Russia-Moscow09Kamchatka(245), asia-Russia-Moscow10BeringSea(246), asia-SaudiArabia(247), asia-Singapore(248), asia-SriLanka(249), asia-Syria(250), asia-Taiwan(251), asia-Tajikistan(252), asia-Thailand(253), asia-Turkmenistan(254), asia-UnitedArabEmirates(255), asia-Uzbekistan-WestUzbekistan(256), asia-Uzbekistan-EastUzbekistan(257), asia-Vietnam(258), asia-Yemen(259), atlanticOcean-Bermuda(260), atlanticOcean-CapeVerde(261), atlanticOcean-FaeroeIslands(262), atlanticOcean-FalklandIslands(263), atlanticOcean-Iceland(264), atlanticOcean-Portugal-Mainland(265), atlanticOcean-Portugal-MadeiraIslands(266), atlanticOcean-Portugal-Azores(267), atlanticOcean-SouthGeorgia-SouthSandwichIslands(268), atlanticOcean-Spain-Mainland(269), atlanticOcean-Spain-CeutaMelilla(270), atlanticOcean-Spain-CanaryIslands(271), atlanticOcean-StHelena(272), atlanticOcean-Svalbard-JanMayen(273), australia-LordHoweIsland(274), australia-Tasmania(275), australia-Victoria(276), australia-NewSouthWales-MostLocations(277), australia-NewSouthWales-Yancowinna(278), australia-Queensland-MostLocations(279), australia-Queensland-HolidayIslands(280), australia-SouthAustralia(281), australia-NorthernTerritory(282), australia-WesternAustralia(283), europe-Albania(284), europe-Andorra(285), europe-Austria(286), europe-Belarus(287), europe-Belgium(288), europe-BosniaHerzegovina(289), europe-Britain-UKGreatBritain(290), europe-Britain-UKNorthernIreland(291), europe-Bulgaria(292), europe-Croatia(293), europe-CzechRepublic(294), europe-Denmark(295), europe-Estonia(296), europe-Finland(297), europe-France(298), europe-Germany(299), europe-Gibraltar(300), europe-Greece(301), europe-Hungary(302), europe-Ireland(303), europe-Italy(304), europe-Latvia(305), europe-Liechtenstein(306), europe-Lithuania(307), europe-Luxembourg(308), europe-Macedonia(309), europe-Malta(310), europe-Moldova(311), europe-Monaco(312), europe-Netherlands(313), europe-Norway(314), europe-Poland(315), europe-Portugal-Mainland(316), europe-Portugal-MadeiraIslands(317), europe-Portugal-Azores(318), europe-Romania(319), europe-Russia-Moscow-01Kaliningrad(320), europe-Russia-Moscow00WestRussia(321), europe-Russia-Moscow01CaspianSea(322), europe-Russia-Moscow02Urals(323), europe-Russia-Moscow03WestSiberia(324), europe-Russia-Moscow03Novosibirsk(325), europe-Russia-Moscow04YeniseiRiver(326), europe-Russia-Moscow05LakeBaikal(327), europe-Russia-Moscow06LenaRiver(328), europe-Russia-Moscow07AmurRiver(329), europe-Russia-Moscow07SakhalinIsland(330), europe-Russia-Moscow08Magadan(331), europe-Russia-Moscow09Kamchatka(332), europe-Russia-Moscow10BeringSea(333), europe-SanMarino(334), europe-Slovakia(335), europe-Slovenia(336), europe-Spain-Mainland(337), europe-Spain-CeutaAndMelilla(338), europe-Spain-CanaryIslands(339), europe-Sweden(340), europe-Switzerland(341), europe-Turkey(342), europe-Ukraine-MostLocations(343), europe-Ukraine-Ruthenia(344), europe-Ukraine-Zaporozhye-ELugansk(345), europe-Ukraine-CentralCrimea(346), europe-VaticanCity(347), europe-Yugoslavia(348), indianOcean-BritishIndianOceanTerritory(349), indianOcean-ChristmasIsland(350), indianOcean-CocosOrKeelingIslands(351), indianOcean-Comoros(352), indianOcean-FrenchSouthernAndAntarcticLands(353), indianOcean-Madagascar(354), indianOcean-Maldives(355), indianOcean-Mauritius(356), indianOcean-Mayotte(357), indianOcean-Reunion(358), indianOcean-Seychelles(359), pacificOcean-Chile-MostLocations(360), pacificOcean-Chile-EasterIslandSalayGomez(361), pacificOcean-CookIslands(362), pacificOcean-Ecuador(363), pacificOcean-Fiji(364), pacificOcean-FrenchPolynesia-SocietyIslands(365), pacificOcean-FrenchPolynesia-MarquesasIslands(366), pacificOcean-FrenchPolynesia-GambierIslands(367), pacificOcean-Guam(368), pacificOcean-Kiribati-GilbertIslands(369), pacificOcean-Kiribati-PhoenixIslands(370), pacificOcean-Kiribati-LineIslands(371), pacificOcean-MarshallIslands-MostLocations(372), pacificOcean-MarshallIslands-Kwajalein(373), pacificOcean-Micronesia-Yap(374), pacificOcean-Micronesia-TrukOrChuuk(375), pacificOcean-Micronesia-PonapeOrPohnpei(376), pacificOcean-Micronesia-Kosrae(377), pacificOcean-Nauru(378), pacificOcean-NewCaledonia(379), pacificOcean-NewZealand-MostLocations(380), pacificOcean-NewZealand-ChathamIslands(381), pacificOcean-Niue(382), pacificOcean-NorfolkIsland(383), pacificOcean-NorthernMarianaIslands(384), pacificOcean-Palau(385), pacificOcean-PapuaNewGuinea(386), pacificOcean-Pitcairn(387), pacificOcean-SamoaAmerican(388), pacificOcean-SamoaWestern(389), pacificOcean-SolomonIslands(390), pacificOcean-Tokelau(391), pacificOcean-Tonga(392), pacificOcean-Tuvalu(393), pacificOceanUSA-EastTime(394), pacificOceanUSA-EastTime-MichiganMostLocations(395), pacificOceanUSA-EastTime-KentuckyLouisvilleArea(396), pacificOceanUSA-EastTime-KentuckyWayneCounty(397), pacificOceanUSA-EastStdTime-IndianaMostLocations(398), pacificOceanUSA-EastStdTime-IndianaCrawfordCounty(399), pacificOceanUSA-EastStdTime-IndianaStarkeCounty(400), pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty(401), pacificOceanUSA-CentTime(402), pacificOceanUSA-CentTime-MichiganWisconsinborder(403), pacificOceanUSA-CentTime-NorthDakotaOliverCounty(404), pacificOceanUSA-MountTime(405), pacificOceanUSA-MountTime-SouthIdahoAndEastOregon(406), pacificOceanUSA-MountTime-Navajo(407), pacificOceanUSA-MountStdTime-Arizona(408), pacificOceanUSA-PacificTime(409), pacificOceanUSA-AlaskaTime(410), pacificOceanUSA-AlaskaTime-AlaskaPanhandle(411), pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck(412), pacificOceanUSA-AlaskaTime-WestAlaska(413), pacificOceanUSA-AleutianIslands(414), pacificOceanUSA-Hawaii(415), pacificOcean-USMinorOutlyingIslands-JohnstonAtoll(416), pacificOcean-USMinorOutlyingIslands-MidwayIslands(417), pacificOcean-USMinorOutlyingIslands-WakeIsland(418), pacificOcean-Vanuatu(419), pacificOceanWallisAndFutuna(420) } MAX-ACCESS read-write STATUS current DESCRIPTION "The daylight savings location." ::= { agSystem 56 } agCurCfgIdleCLITimeout OBJECT-TYPE SYNTAX INTEGER (1..10080) MAX-ACCESS read-only STATUS current DESCRIPTION "Set idle CLI sessions timeout." ::= { agSystem 57 } agNewCfgIdleCLITimeout OBJECT-TYPE SYNTAX INTEGER (1..10080) MAX-ACCESS read-write STATUS current DESCRIPTION "Set idle CLI sessions timeout." ::= { agSystem 58 } agCurCfgXMLCfgServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The TCP port number that the XML config server is listening to in the current_configuration block. If HTTPS is also enabled then the port numbers should be the same" ::= { agSystem 59 } agNewCfgXMLCfgServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The TCP port number that the XML config server is listening to in the new_configuration block. If HTTPS is also enabled then the port numbers should be the same" ::= { agSystem 60 } agCurCfgLoginNotice OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The user defined login notice." ::= { agSystem 75 } agNewCfgLoginNotice OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The user defined login notice." ::= { agSystem 76 } agPlatformIdentifier OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "An administratively-assigned value that identifies managed device platform." ::= { agSystem 77 } agFormFactor OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "An administratively-assigned value that identifies managed device form-factor." ::= { agSystem 78 } agCurCfgTputInterval OBJECT-TYPE SYNTAX INTEGER (1..60) MAX-ACCESS read-only STATUS current DESCRIPTION "Set throughput interval." ::= { agSystem 62 } agNewCfgTputInterval OBJECT-TYPE SYNTAX INTEGER (1..60) MAX-ACCESS read-write STATUS current DESCRIPTION "Set throughput interval." ::= { agSystem 63 } agCurCfgTputThreshold OBJECT-TYPE SYNTAX INTEGER (0..99) MAX-ACCESS read-only STATUS current DESCRIPTION "Set throughput threshold." ::= { agSystem 64 } agNewCfgTputThreshold OBJECT-TYPE SYNTAX INTEGER (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Set throughput threshold." ::= { agSystem 65 } agCurCfgBootVAID OBJECT-TYPE SYNTAX INTEGER (1..1024) MAX-ACCESS read-only STATUS current DESCRIPTION "Alteon unique VA identifier is used to set its traffic virtual MAC." ::= { agSystem 67 } agNewCfgCfgBootVAID OBJECT-TYPE SYNTAX INTEGER (1..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "Alteon unique VA identifier is used to set its traffic virtual MAC. To avoid MAC collisions, it is required to set a unique identifier on each VA on a network. SET will fail if the old_vaid is same as new_vaid." ::= { agSystem 68 } agCurCfgPrompt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the hostname display in CLI." ::= { agSystem 69 } agNewCfgPrompt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the TCP health services." ::= { agSystem 70 } agCurCfgHCTCPServState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the TCP health services." ::= { agSystem 73 } agNewCfgHCTCPServState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the TCP health services." ::= { agSystem 74 } agCfgHcTcpPortNxtIdx OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "The next free TCP port index.It returns 0 when all 10 ports are configured." ::= { agSystem 79 } agHcTcpPortTable OBJECT IDENTIFIER ::= { agSystem 80 } agCurCfgHcTcpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AgCurCfgHcTcpPortTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of TCP services listen for health check in the current config block." ::= { agHcTcpPortTable 1 } agCurCfgHcTcpPortTableEntry OBJECT-TYPE SYNTAX AgCurCfgHcTcpPortTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the table of TCP services listen for health check." INDEX { agCurCfgHcTcpPortIndx } ::= { agCurCfgHcTcpPortTable 1 } AgCurCfgHcTcpPortTableEntry ::= SEQUENCE { agCurCfgHcTcpPortIndx Integer32, agCurCfgHcTcpPortNum INTEGER } agCurCfgHcTcpPortIndx OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "The Health check TCP Services table index." ::= { agCurCfgHcTcpPortTableEntry 1 } agCurCfgHcTcpPortNum OBJECT-TYPE SYNTAX INTEGER (2..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The TCP Port number which listen for health check." ::= { agCurCfgHcTcpPortTableEntry 2 } agNewCfgHcTcpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AgNewCfgHcTcpPortTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of TCP services listen for health check in the new config block." ::= { agHcTcpPortTable 2 } agNewCfgHcTcpPortTableEntry OBJECT-TYPE SYNTAX AgNewCfgHcTcpPortTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the table of TCP services listen for health check." INDEX { agNewCfgHcTcpPortIndx } ::= { agNewCfgHcTcpPortTable 1 } AgNewCfgHcTcpPortTableEntry ::= SEQUENCE { agNewCfgHcTcpPortIndx Integer32, agNewCfgHcTcpPortNum INTEGER, agNewCfgHcTcpPortNumDelete INTEGER } agNewCfgHcTcpPortIndx OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "The Health check TCP Services table index." ::= { agNewCfgHcTcpPortTableEntry 1 } agNewCfgHcTcpPortNum OBJECT-TYPE SYNTAX INTEGER (2..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The TCP Port number which listen for health check." ::= { agNewCfgHcTcpPortTableEntry 2 } agNewCfgHcTcpPortNumDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned." ::= { agNewCfgHcTcpPortTableEntry 3 } agImageTables OBJECT IDENTIFIER ::= { agSystem 82 } agImageAdcTable OBJECT-TYPE SYNTAX SEQUENCE OF AgImageAdcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of ADC Software Images" ::= { agImageTables 1 } agImageAdcEntry OBJECT-TYPE SYNTAX AgImageAdcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the ADC Software Image table" INDEX { agImageAdcIndex } ::= { agImageAdcTable 1 } AgImageAdcEntry ::= SEQUENCE { agImageAdcIndex INTEGER, agImageAdcVersion DisplayString, agImageAdcDownloadTime DisplayString, agImageAdcAssignedVadcs OCTET STRING, agImageAdcStatus INTEGER , agImageAdcAdd INTEGER, agImageAdcRemove INTEGER, agImageAdcBmap OCTET STRING, agImageAdcDefault INTEGER } agImageAdcIndex OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "The ADC Software Image ID" ::= { agImageAdcEntry 1 } agImageAdcVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ADC Software Image Version" ::= { agImageAdcEntry 2 } agImageAdcDownloadTime OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ADC Software Image Download Time" ::= { agImageAdcEntry 3 } agImageAdcAssignedVadcs OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "List of vadc ids that will use this image on reboot" ::= { agImageAdcEntry 4 } agImageAdcStatus OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), assigned(2), incompatible(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The ADC Software Image status" ::= { agImageAdcEntry 5 } agImageAdcAdd OBJECT-TYPE SYNTAX INTEGER (0..28) MAX-ACCESS read-write STATUS current DESCRIPTION "Add VADc to use this Software Image (whwre 0 is No Operation)" ::= { agImageAdcEntry 6 } agImageAdcRemove OBJECT-TYPE SYNTAX INTEGER (0..28) MAX-ACCESS read-write STATUS current DESCRIPTION "Remove VADc from using this Software Image (whwre 0 is No Operation)" ::= { agImageAdcEntry 7 } agImageAdcBmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Bitmap of vadc that will use this image on reboot" ::= { agImageAdcEntry 8 } agImageAdcDefault OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set the image as default image." ::= { agImageAdcEntry 9 } agImageVxTable OBJECT-TYPE SYNTAX SEQUENCE OF AgImageVxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of ADC-VX Software Images" ::= { agImageTables 2 } agImageVxEntry OBJECT-TYPE SYNTAX AgImageVxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the ADC-VX Software Image table" INDEX { agImageVxIndex } ::= { agImageVxTable 1 } AgImageVxEntry ::= SEQUENCE { agImageVxIndex INTEGER, agImageVxVersion DisplayString, agImageVxDownloadTime DisplayString, agImageVxStatus INTEGER } agImageVxIndex OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The ADC-VX Software Image ID" ::= { agImageVxEntry 1 } agImageVxVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ADC-VX Software Image Version" ::= { agImageVxEntry 2 } agImageVxDownloadTime OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ADC-VX Software Image Download Time" ::= { agImageVxEntry 3 } agImageVxStatus OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The ADC-VX Software Image status" ::= { agImageVxEntry 4 } agImageTrasform OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The transformation action restarts the device to switch between ADC-VX and Standalone images. The following values should also be set for the transformation action. 1) agImageTransformID for next boot image. 2) agImageTransformBootOption for next configuration block." ::= { agSystem 83 } agImageTransformBootOption OBJECT-TYPE SYNTAX INTEGER { factoryDefault(1), lastKnownCfg(2), factoryWithMgmtPortCfg(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The configuration mode in which the transformed image should load. factoryDefault(1) - factory default, lastKnownCfg(2) - Active configuration, factoryWithMgmtPortCfg(3) - factory default with retaining current management port configuration. When read, value factoryDefault(1) is returned." ::= { agSystem 84 } agImageTransformID OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The Image ID of the image to load after transform. When read, value 0 is returned." ::= { agSystem 85 } agCurCfgIdleCUAlloc OBJECT-TYPE SYNTAX INTEGER { limit( 0 ) , share( 1 ) } MAX-ACCESS read-only STATUS current DESCRIPTION "limit(0) - Limit vADC to the max allowed by the assigned CUs. share(1) - Share SP's unused resources across vADCs." ::= { agSystem 86 } agNewCfgIdleCUAlloc OBJECT-TYPE SYNTAX INTEGER { limit( 0 ) , share( 1 ) } MAX-ACCESS read-write STATUS current DESCRIPTION "limit(0) - Limit vADC to the max allowed by the assigned CUs. share(1) - Share SP's unused resources across vADCs." ::= { agSystem 87 } agActiveConfigBlk OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The configuration block which is active rightnow.This object can have either one of these values Active Configuration, Backup configuration, Default configuration." ::= { agSystem 88 } agDefaultImageID OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The Image ID of the image to assign vADCs" ::= { agSystem 89 } agDefaultImageVer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The default image version." ::= { agSystem 90 } agMgmtConfigForNxtReset OBJECT-TYPE SYNTAX INTEGER { erase(1), keep(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The management port configuration option for next reset. The following values are writable: erase(1)...remove management port configuration keep(2) ...keep management port configuration" ::= { agSystem 91 } agActiveImageName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The image name which is active rightnow." ::= { agSystem 92 } agCurCfgSmtpHostIPVersion OBJECT-TYPE SYNTAX INTEGER { ipv4(4), ipv6(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "IP version for SMTP host name(agNewCfgSmtpHost)." ::= { agSystem 93 } agNewCfgSmtpHostIPVersion OBJECT-TYPE SYNTAX INTEGER { ipv4(4), ipv6(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP version for SMTP host name(agNewCfgSmtpHost). Always, first SET the SMTP hostname and this object." ::= { agSystem 94 } -- IPV6 MIBS agMgmtCurCfgIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION " The IPV6 address of the management port. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agMgmt 75 } agMgmtNewCfgIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION " The IPV6 address of the management port. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agMgmt 76 } agMgmtCurCfgIpv6PrefixLen OBJECT-TYPE SYNTAX INTEGER (0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " The IPV6 prefix length of the management port. " ::= { agMgmt 77 } agMgmtNewCfgIpv6PrefixLen OBJECT-TYPE SYNTAX INTEGER (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION " The IPV6 prefix length of the management port. " ::= { agMgmt 78 } agMgmtCurCfgIpv6Gateway OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION " The IPV6 Gateway of the management port. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agMgmt 79 } agMgmtNewCfgIpv6Gateway OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION " The IPV6 Gateway of the management port. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx " ::= { agMgmt 80 } agMgmtCurCfgIpv6Addr2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION " The IPV6 address2 of the management port. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx " ::= { agMgmt 81 } agMgmtNewCfgIpv6Addr2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION " The IPV6 address2 of the management port. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx " ::= { agMgmt 82 } agMgmtCurCfgIpv6PrefixLen2 OBJECT-TYPE SYNTAX INTEGER (0..128) MAX-ACCESS read-only STATUS current DESCRIPTION " The IPV6 prefix length2 of the management port. " ::= { agMgmt 83 } agMgmtNewCfgIpv6PrefixLen2 OBJECT-TYPE SYNTAX INTEGER (0..128) MAX-ACCESS read-write STATUS current DESCRIPTION " The IPV6 prefix length2 of the management port. " ::= { agMgmt 84 } agMgmtCurCfgIpv6Gateway2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION " The IPV6 Gateway2 of the management port. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx " ::= { agMgmt 85 } agMgmtNewCfgIpv6Gateway2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION " The IPV6 Gateway2 of the management port. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx " ::= { agMgmt 86 } -- system Peer Configurarion Menu agSysPeerCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgSysPeerCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of system peer sync configuration in the current Configuration Block." ::= { agSysPeerConfig 1 } agSysPeerCurCfgEntry OBJECT-TYPE SYNTAX AgSysPeerCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the system peer table" INDEX { agSysPeerCurCfgIndex } ::= { agSysPeerCurCfgTable 1 } AgSysPeerCurCfgEntry ::= SEQUENCE { agSysPeerCurCfgIndex Integer32, agSysPeerCurCfgAddr IpAddress, agSysPeerCurCfgState INTEGER, agSysPeerCurCfgVadcBmap OCTET STRING, agSysPeerCurCfgAddrType INTEGER, agSysPeerCurCfgIpv6Addr DisplayString } agSysPeerCurCfgIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The system peer number for which the IP information is related." ::= { agSysPeerCurCfgEntry 1 } agSysPeerCurCfgAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv4 address of the system peer." ::= { agSysPeerCurCfgEntry 2 } agSysPeerCurCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the system peer." ::= { agSysPeerCurCfgEntry 3 } agSysPeerCurCfgVadcBmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The vAdcs added to the system peer." ::= { agSysPeerCurCfgEntry 4 } agSysPeerCurCfgAddrType OBJECT-TYPE SYNTAX INTEGER { ipv4(4), ipv6(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the IP address of the peer (IPv4 | IPv6)" ::= { agSysPeerCurCfgEntry 5 } agSysPeerCurCfgIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION " The IPV6 address of the peer identified by the instance of agSysPeerCurCfgIndex field. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx " ::= { agSysPeerCurCfgEntry 6 } agSysPeerNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgSysPeerNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of peer sync configuration in the New Configuration Block." ::= { agSysPeerConfig 2 } agSysPeerNewCfgEntry OBJECT-TYPE SYNTAX AgSysPeerNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the system peer table" INDEX { agSysPeerNewCfgIndex } ::= { agSysPeerNewCfgTable 1 } AgSysPeerNewCfgEntry ::= SEQUENCE { agSysPeerNewCfgIndex Integer32, agSysPeerNewCfgAddr IpAddress, agSysPeerNewCfgState INTEGER, agSysPeerNewCfgVadcBmap OCTET STRING, agSysPeerNewCfgDelete INTEGER, agSysPeerNewCfgVadcAdd INTEGER, agSysPeerNewCfgVadcRemove INTEGER, agSysPeerNewCfgAddrType INTEGER, agSysPeerNewCfgIpv6Addr DisplayString } agSysPeerNewCfgIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The system peer number for which the IP information is related." ::= { agSysPeerNewCfgEntry 1 } agSysPeerNewCfgAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IPv4 address of the system peer." ::= { agSysPeerNewCfgEntry 2 } agSysPeerNewCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The state of the system peer." ::= { agSysPeerNewCfgEntry 3 } agSysPeerNewCfgVadcBmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The vAdcs that belongs to system peer." ::= { agSysPeerNewCfgEntry 4 } agSysPeerNewCfgDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { agSysPeerNewCfgEntry 5 } agSysPeerNewCfgVadcAdd OBJECT-TYPE SYNTAX INTEGER (0..28) MAX-ACCESS read-write STATUS current DESCRIPTION "Add VADc to the system peer" ::= { agSysPeerNewCfgEntry 6 } agSysPeerNewCfgVadcRemove OBJECT-TYPE SYNTAX INTEGER (0..28) MAX-ACCESS read-write STATUS current DESCRIPTION "Remove VADc from the system peer" ::= { agSysPeerNewCfgEntry 7 } agSysPeerNewCfgAddrType OBJECT-TYPE SYNTAX INTEGER { ipv4(4), ipv6(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of the IP address of the peer (IPv4 | IPv6)" ::= { agSysPeerNewCfgEntry 8 } agSysPeerNewCfgIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION " The IPV6 address of the peer identified by the instance of agSysPeerNewCfgIndex field. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx " ::= { agSysPeerNewCfgEntry 9 } -- End system Peer Sync Configuration -- Auto-Discovery topology table info -- Syslog Configuration agCurCfgSyslogHost OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The syslog host IP address, as currently configured in the current_configuration block." ::= { agSyslog 1 } agNewCfgSyslogHost OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The syslog host IP address, in the new_configuration block." ::= { agSyslog 2 } agCurCfgSyslog2Host OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The second syslog host IP address, as currently configured in the current_configuration block." ::= { agSyslog 3 } agNewCfgSyslog2Host OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The second syslog host IP address, in the new_configuration block." ::= { agSyslog 4 } agCurCfgSyslogFac OBJECT-TYPE SYNTAX INTEGER { local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The facility of syslog1 host in the current_configuration block." ::= { agSyslog 5 } agNewCfgSyslogFac OBJECT-TYPE SYNTAX INTEGER { local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The facility of syslog1 host in the new_configuration block." ::= { agSyslog 6 } agCurCfgSyslog2Fac OBJECT-TYPE SYNTAX INTEGER { local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The facility of syslog2 host in the current_configuration block." ::= { agSyslog 7 } agNewCfgSyslog2Fac OBJECT-TYPE SYNTAX INTEGER { local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The facility of syslog2 host in the new_configuration block." ::= { agSyslog 8 } agCurCfgSyslogSev OBJECT-TYPE SYNTAX INTEGER { emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The severity of syslog1 host in the current configuration block." ::= { agSyslog 13 } agNewCfgSyslogSev OBJECT-TYPE SYNTAX INTEGER { emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The severity of syslog1 host in the new configuration block." ::= { agSyslog 14 } agCurCfgSyslog2Sev OBJECT-TYPE SYNTAX INTEGER { emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The severity of syslog2 host in the current configuration block." ::= { agSyslog 15 } agNewCfgSyslog2Sev OBJECT-TYPE SYNTAX INTEGER { emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The severity of syslog2 host in the new configuration block." ::= { agSyslog 16 } agClrSyslogMsgs OBJECT-TYPE SYNTAX INTEGER { other(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clears all current Syslog messages." ::= { agSyslog 9 } agSyslogMsgTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the syslog message table." ::= { agSyslog 10 } agSyslogMsgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgSyslogMsgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of syslog messages." ::= { agSyslog 11 } agCurCfgSyslog3Host OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The third syslog host IP address, as currently configured in the current_configuration block." ::= { agSyslog 17 } agNewCfgSyslog3Host OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The third syslog host IP address, in the new_configuration block." ::= { agSyslog 18 } agCurCfgSyslog4Host OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The fourth syslog host IP address, as currently configured in the current_configuration block." ::= { agSyslog 19 } agNewCfgSyslog4Host OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The fourth syslog host IP address, in the new_configuration block." ::= { agSyslog 20 } agCurCfgSyslog5Host OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The fifth syslog host IP address, as currently configured in the current_configuration block." ::= { agSyslog 21 } agNewCfgSyslog5Host OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The fifth syslog host IP address, in the new_configuration block." ::= { agSyslog 22 } agCurCfgSyslog3Fac OBJECT-TYPE SYNTAX INTEGER { local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The facility of syslog3 host in the current_configuration block." ::= { agSyslog 23 } agNewCfgSyslog3Fac OBJECT-TYPE SYNTAX INTEGER { local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The facility of syslog3 host in the new_configuration block." ::= { agSyslog 24 } agCurCfgSyslog4Fac OBJECT-TYPE SYNTAX INTEGER { local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The facility of syslog4 host in the current_configuration block." ::= { agSyslog 25 } agNewCfgSyslog4Fac OBJECT-TYPE SYNTAX INTEGER { local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The facility of syslog4 host in the new_configuration block." ::= { agSyslog 26 } agCurCfgSyslog5Fac OBJECT-TYPE SYNTAX INTEGER { local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The facility of syslog5 host in the current_configuration block." ::= { agSyslog 27 } agNewCfgSyslog5Fac OBJECT-TYPE SYNTAX INTEGER { local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The facility of syslog5 host in the new_configuration block." ::= { agSyslog 28 } agCurCfgSyslog3Sev OBJECT-TYPE SYNTAX INTEGER { emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The severity of syslog3 host in the current configuration block." ::= { agSyslog 29 } agNewCfgSyslog3Sev OBJECT-TYPE SYNTAX INTEGER { emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The severity of syslog3 host in the new configuration block." ::= { agSyslog 30 } agCurCfgSyslog4Sev OBJECT-TYPE SYNTAX INTEGER { emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The severity of syslog4 host in the current configuration block." ::= { agSyslog 31 } agNewCfgSyslog4Sev OBJECT-TYPE SYNTAX INTEGER { emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The severity of syslog4 host in the new configuration block." ::= { agSyslog 32 } agCurCfgSyslog5Sev OBJECT-TYPE SYNTAX INTEGER { emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The severity of syslog5 host in the current configuration block." ::= { agSyslog 33 } agNewCfgSyslog5Sev OBJECT-TYPE SYNTAX INTEGER { emerg0(1), alert1(2), crit2(3), err3(4), warning4(5), notice5(6), info6(7), debug7(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The severity of syslog5 host in the new configuration block." ::= { agSyslog 34 } agCurCfgAuditTrail OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable Configuration Audit. Enable will log configuration changes in brief alongwith the user identity." ::= { agSyslog 35 } agNewCfgAuditTrail OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Configuration Audit." ::= { agSyslog 36 } agCurCfgSyslogHostv6 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The syslog host IPv6 address, as currently configured in the current_configuration block." ::= { agSyslog 37 } agNewCfgSyslogHostv6 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The syslog host IPv6 address, in the new_configuration block." ::= { agSyslog 38 } agCurCfgSyslog2Hostv6 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The second syslog host IPv6 address, as currently configured in the current_configuration block." ::= { agSyslog 39 } agNewCfgSyslog2Hostv6 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The second syslog host IPv6 address, in the new_configuration block." ::= { agSyslog 40 } agCurCfgSyslog3Hostv6 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The third syslog host IPv6 address, as currently configured in the current_configuration block." ::= { agSyslog 41 } agNewCfgSyslog3Hostv6 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The third syslog host IPv6 address, in the new_configuration block." ::= { agSyslog 42 } agCurCfgSyslog4Hostv6 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The fourth syslog host IPv6 address, as currently configured in the current_configuration block." ::= { agSyslog 43 } agNewCfgSyslog4Hostv6 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The fourth syslog host IPv6 address, in the new_configuration block." ::= { agSyslog 44 } agCurCfgSyslog5Hostv6 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The fifth syslog host IPv6 address, as currently configured in the current_configuration block." ::= { agSyslog 45 } agNewCfgSyslog5Hostv6 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The fifth syslog host IPv6 address, in the new_configuration block." ::= { agSyslog 46 } agSyslogMsgTableEntry OBJECT-TYPE SYNTAX AgSyslogMsgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A syslog message stored on the switch." INDEX { agSyslogMsgIndex } ::= { agSyslogMsgTable 1 } AgSyslogMsgTableEntry ::= SEQUENCE { agSyslogMsgIndex Integer32, agSyslogMessage DisplayString } agSyslogMsgIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The syslog message table index." ::= { agSyslogMsgTableEntry 1 } agSyslogMessage OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The syslog message." ::= { agSyslogMsgTableEntry 2 } agSyslogSavedMsgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgSyslogSavedMsgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of syslog messages saved in Flash." ::= { agSyslog 47 } agSyslogSavedMsgTableEntry OBJECT-TYPE SYNTAX AgSyslogSavedMsgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A syslog messages saved in FLASH." INDEX { agSyslogMsgSavedIndex } ::= { agSyslogSavedMsgTable 1 } AgSyslogSavedMsgTableEntry ::= SEQUENCE { agSyslogMsgSavedIndex Integer32, agSyslogSavedMessage DisplayString } agSyslogMsgSavedIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The syslog Saved message table index." ::= { agSyslogSavedMsgTableEntry 1 } agSyslogSavedMessage OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The syslog messages saved in FLASH." ::= { agSyslogSavedMsgTableEntry 2 } agLog OBJECT IDENTIFIER ::= { agSyslog 12 } agNewCfgSyslogTrapConsole OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable console syslog and SNMP trap, in the new_configuration block." ::= { agLog 1 } agCurCfgSyslogTrapConsole OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable console syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 2 } agNewCfgSyslogTrapSystem OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable system level syslog and SNMP trap, in the new_configuration block." ::= { agLog 3 } agCurCfgSyslogTrapSystem OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable system level syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 4 } agNewCfgSyslogTrapMgmt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable management(flash, config, login) syslog and SNMP trap, in the new_configuration block." ::= { agLog 5 } agCurCfgSyslogTrapMgmt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable management(flash, config, login) syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 6 } agNewCfgSyslogTrapCli OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable CLI generated error syslog and SNMP trap, in the new_configuration block." ::= { agLog 7 } agCurCfgSyslogTrapCli OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable CLI generated error syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 8 } agNewCfgSyslogTrapStp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable spanning tree syslog and SNMP trap, in the new_configuration block." ::= { agLog 9 } agCurCfgSyslogTrapStp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable spanning tree syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 10 } agNewCfgSyslogTrapVlan OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable VLAN syslog and SNMP trap, in the new_configuration block." ::= { agLog 11 } agCurCfgSyslogTrapVlan OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable VLAN syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 12 } agNewCfgSyslogTrapSlb OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable SLB syslog and SNMP trap, in the new_configuration block." ::= { agLog 13 } agCurCfgSyslogTrapSlb OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable SLB syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 14 } agNewCfgSyslogTrapGslb OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable GSLB syslog and SNMP trap, in the new_configuration block." ::= { agLog 15 } agCurCfgSyslogTrapGslb OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable GSLB syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 16 } agNewCfgSyslogTrapFilter OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable filter syslog and SNMP trap, in the new_configuration block." ::= { agLog 17 } agCurCfgSyslogTrapFilter OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable filter syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 18 } agNewCfgSyslogTrapSsh OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable SSH, RADIUS syslog and SNMP trap, in the new_configuration block." ::= { agLog 19 } agCurCfgSyslogTrapSsh OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable SSH, RADIUS syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 20 } agNewCfgSyslogTrapVrrp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable VRRP syslog and SNMP trap, in the new_configuration block." ::= { agLog 21 } agCurCfgSyslogTrapVrrp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable VRRP syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 22 } agNewCfgSyslogTrapBgp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable BGP syslog and SNMP trap, in the new_configuration block." ::= { agLog 23 } agCurCfgSyslogTrapBgp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable BGP syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 24 } agNewCfgSyslogTrapNtp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable NTP syslog and SNMP trap, in the new_configuration block." ::= { agLog 25 } agCurCfgSyslogTrapNtp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable NTP syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 26 } agNewCfgSyslogTrapIp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable IP related syslog and SNMP trap, in the new_configuration block." ::= { agLog 31 } agCurCfgSyslogTrapIp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable IP related syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 32 } agNewCfgSyslogTrapWeb OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable WEBUI related syslog and SNMP trap, in the new_configuration block." ::= { agLog 35 } agCurCfgSyslogTrapWeb OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable WEBUI related syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 36 } agNewCfgSyslogTrapSynAtk OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable SYN attack detection related syslog and SNMP trap, in the new_configuration block." ::= { agLog 37 } agCurCfgSyslogTrapSynAtk OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable SYN attack detection related syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 38 } agNewCfgSyslogTrapTcpLim OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable TCP rate limiting related syslog and SNMP trap, in the new_configuration block." ::= { agLog 39 } agCurCfgSyslogTrapTcpLim OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable TCP rate limiting related syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 40 } agNewCfgSyslogTrapOspf OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable OSPF related syslog and SNMP trap, in the new_configuration block." ::= { agLog 41 } agCurCfgSyslogTrapOspf OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable OSPF related syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 42 } agNewCfgSyslogTrapSecurity OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Security pack related syslog and SNMP trap, in the new_configuration block." ::= { agLog 43 } agCurCfgSyslogTrapSecurity OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable Security pack related syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 44 } agNewCfgSyslogTrapRmon OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable rmon related syslog and SNMP trap, in the new_configuration block." ::= { agLog 45 } agCurCfgSyslogTrapRmon OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable rmon related syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 46 } agNewCfgSyslogTrapSlbAtk OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable SLB ATK related syslog and SNMP trap, in the new_configuration block." ::= { agLog 47 } agCurCfgSyslogTrapSlbAtk OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable SLB ATK related syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 48 } agNewCfgSyslogTrapIpv6 OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable IPV6 related syslog and SNMP trap, in the new_configuration block." ::= { agLog 49 } agCurCfgSyslogTrapIpv6 OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable IPV6 related syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 50 } agNewCfgSyslogTrapAppSvc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Application service related syslog and SNMP trap, in the new_configuration block." ::= { agLog 51 } agCurCfgSyslogTrapAppSvc OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable Application service related syslog and SNMP trap, as currently configured in the current_configuration block." ::= { agLog 52 } -- Trap host table agTrapHostTableMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the trap host table." ::= { agTrapHost 1 } agCurCfgTrapHostTable OBJECT-TYPE SYNTAX SEQUENCE OF AgCurCfgTrapHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of trap hosts which to send SNMP traps in the current_configuration block." ::= { agTrapHost 2 } agCurCfgTrapHostEntry OBJECT-TYPE SYNTAX AgCurCfgTrapHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the trap host table in the current_configuration block." INDEX { agCurCfgTrapHostIndx } ::= { agCurCfgTrapHostTable 1 } AgCurCfgTrapHostEntry ::= SEQUENCE { agCurCfgTrapHostIndx Integer32, agCurCfgTrapHostIpAddr IpAddress, agCurCfgTrapHostCommString DisplayString } agCurCfgTrapHostIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the row in trap host table." ::= { agCurCfgTrapHostEntry 1 } agCurCfgTrapHostIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of a trap host." ::= { agCurCfgTrapHostEntry 2 } agCurCfgTrapHostCommString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The SNMP community string to use with the trap host" ::= { agCurCfgTrapHostEntry 3 } agNewCfgTrapHostTable OBJECT-TYPE SYNTAX SEQUENCE OF AgNewCfgTrapHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of trap hosts which to send SNMP traps in the new_configuration block." ::= { agTrapHost 3 } agNewCfgTrapHostEntry OBJECT-TYPE SYNTAX AgNewCfgTrapHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the trap host table in the new_configuration block." INDEX { agNewCfgTrapHostIndx } ::= { agNewCfgTrapHostTable 1 } AgNewCfgTrapHostEntry ::= SEQUENCE { agNewCfgTrapHostIndx Integer32, agNewCfgTrapHostIpAddr IpAddress, agNewCfgTrapHostCommString DisplayString } agNewCfgTrapHostIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the row in trap host table." ::= { agNewCfgTrapHostEntry 1 } agNewCfgTrapHostIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of a trap host." ::= { agNewCfgTrapHostEntry 2 } agNewCfgTrapHostCommString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMP community string to use with the trap host" ::= { agNewCfgTrapHostEntry 3 } -- TFTP Config agTftpServer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The TFTP server IP address or domain name." ::= { agTftp 1 } agTftpImageAdc OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The Image ID in which to load the new image" ::= { agTftp 19 } agTftpImageVx OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "The Image ID in which to load the new VX image" ::= { agTftp 20 } agTftpImageAdc OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The Image ID in which to load the new image" ::= { agTftp 19 } agTftpImageVx OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-write STATUS current DESCRIPTION "The Image ID in which to load the new VX image" ::= { agTftp 20 } agTftpImage OBJECT-TYPE SYNTAX INTEGER { image1(2), image2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether the image file should be loaded in image1 or image2 in flash." ::= { agTftp 2 } agTftpImageFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The image file name to be downloaded." ::= { agTftp 3 } agTftpCfgFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The configuration file name." ::= { agTftp 4 } agTftpDumpFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The file name for core dump." ::= { agTftp 5 } agTftpAction OBJECT-TYPE SYNTAX INTEGER { other(1), img-get(2), cfg-get(3), cfg-put(4), dump-put(5), bkpdump-put(6), tsdump-put(8), bogon-get(9) ,xml-get(14) ,applog-export(15) ,cert-export(16) ,cert-import(17) ,put-dumps(18) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to perform various TFTP Get or Put functions. The TFTP sever is specified in agTftpServer object. img-get(2) - Download switch image from a specified image file (agTftpImageFileName) on the TFTP server to the destinated storage (agTftpImage). cfg-get(3) - Download switch configuration from a specified file (agTftpCfgFileName) on the TFTP server. cfg-put(4) - Upload switch configuration to a specified file (agTftpCfgFileName) on the TFTP server. dump-put(5) - Download switch core dump to a specified file (agTftpDumpFileName) on the TFTP server. bkpdump-put(6)- Download switch backup core dump to a specified file (agTftpDumpFileName) on the TFTP server. tsdump-put(8) - Download switch tech support dump to a specified file (agTftpTSDumpFileName) on the TFTP server. bogon-get(9) - Download bogon config file from a specified bogon file (uses agTftpImageFileName) on the TFTP server. xml-get(14) - Import XML client certificate to a specified file (agTftpCfgFileName) on the TFTP server. put-dumps(18) - Upload all dumps, logs and configurations via FTP. other(1) is returned always when read." ::= { agTftp 6 } agTftpLastActionStatus OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The recorded status of the previous TFTP activity." ::= { agTftp 7 } agTftpPort OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify whether the TFTP operation should be performed over the data port or the management port.In the case of Admin context only mgmt(2) is valid.Setting with data(1) will return an error" ::= { agTftp 8 } agTftpUserName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The username for FTP server or blank for TFTP server." ::= { agTftp 9 } agTftpPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The password for FTP server." ::= { agTftp 10 } agTftpTSDumpFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The file name for TS dump." ::= { agTftp 11 } agTftpVersionPass OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-write STATUS current DESCRIPTION "The password for upgraded version." ::= { agTftp 14 } agTftpMode OBJECT-TYPE SYNTAX INTEGER { tftp(1), ftp(2), scp(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Wheather the mode of operation should be TFTP or FTP or SCP." ::= { agTftp 15 } agTftpConfigOption OBJECT-TYPE SYNTAX INTEGER { all(1), global(2), vADC(3), pvadc(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Wheather the put or get configuration option should be all or global or vADC configurations." ::= { agTftp 16 } agTftpConfigOptionvADC OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The vADC's indexes for put or get vADC configuration option. It should be string all or separated with comma(,) or hypen(-). Example: all 2,5,28 3-7" ::= { agTftp 17 } agTftpConfigTypevADC OBJECT-TYPE SYNTAX INTEGER { all(1), vadmin(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The vADC's type for put or get vADC configuration option." ::= { agTftp 18 } agTftpSSLCertType OBJECT-TYPE SYNTAX INTEGER { key(1), srvrcert(2), cert-key(3), request(4), intermca(5), trustca(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of certificate component to import/export." ::= { agTftp 21 } agTftpSSLCertId OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The type of certificate component to import/export." ::= { agTftp 22 } agTftpSSLCertKeyPassphrase OBJECT-TYPE SYNTAX DisplayString (SIZE(4..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The Passphrase key which is used for key import/export." ::= { agTftp 23 } agTftpSSLCertFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The file name for SSL Certificate\Key dump." ::= { agTftp 24 } agTftpPrivateKeys OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Include Private Keys. If 'yes', requires pass phrase to be entered by the user. By Default, private keys are not included." ::= { agTftp 25 } agTftpPrivateKeyPassPhrase OBJECT-TYPE SYNTAX DisplayString (SIZE(4..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "Pass phrase for including private keys in the config file." ::= { agTftp 26 } agTftpPrivateKeyConfPassPhrase OBJECT-TYPE SYNTAX DisplayString (SIZE(4..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "Confirm private key pass phrase." ::= { agTftp 27 } agTftpAllowedNetworks OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure allowed networks. If yes, configure allowed networks by the user. By default no, allowed networks not configured." ::= { agTftp 28 } agCfgTftpHostIPVersion OBJECT-TYPE SYNTAX INTEGER { ipv4(4), ipv6(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP version for TFTP host name(agTftpServer). Always, first SET the TFTP hostname and this object." ::= { agTftp 29 } agTftpImageType OBJECT-TYPE SYNTAX INTEGER { other(0), vx(1), adc(2), vxAdc(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Image type to be downloaded." ::= { agTftp 30 } agTftpImageType OBJECT-TYPE SYNTAX INTEGER { other(0), vx(1), adc(2), vxAdc(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Image type to be downloaded." ::= { agTftp 30 } -- Agent Port Table agPortTableMaxEnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the port configuration host table." ::= { agPortConfig 1 } agPortCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgPortCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of port configuration in the current_configuration block." ::= { agPortConfig 2 } agPortCurCfgTableEntry OBJECT-TYPE SYNTAX AgPortCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the port table in the current_configuration block." INDEX { agPortCurCfgIndx } ::= { agPortCurCfgTable 1 } AgPortCurCfgTableEntry ::= SEQUENCE { agPortCurCfgIndx Integer32, agPortCurCfgState INTEGER, agPortCurCfgVlanTag INTEGER, agPortCurCfgRmon INTEGER, agPortCurCfgPVID Integer32, agPortCurCfgFastEthAutoNeg INTEGER, agPortCurCfgFastEthSpeed INTEGER, agPortCurCfgFastEthMode INTEGER, agPortCurCfgFastEthFctl INTEGER, agPortCurCfgGigEthAutoNeg INTEGER, agPortCurCfgGigEthFctl INTEGER, agPortCurCfgBwmContract Integer32, agPortCurCfgDiscardNonIPs INTEGER, agPortCurCfgLinkTrap INTEGER, agPortCurCfgPreferred INTEGER, agPortCurCfgBackup INTEGER, agPortCurCfgEgressBW DisplayString, agPortCurCfgNonIPBwmContract Integer32, agPortCurCfgGigEthSpeed INTEGER, agPortCurCfgGigEthMode INTEGER, agPortCurCfgPortAlias DisplayString, agPortCurCfgPortName DisplayString, agPortCurCfgPortStp INTEGER, agPortCurCfgPortIpFwd INTEGER } agPortCurCfgIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the row in port configurations table." ::= { agPortCurCfgTableEntry 1 } agPortCurCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is the state of the port." ::= { agPortCurCfgTableEntry 2 } agPortCurCfgVlanTag OBJECT-TYPE SYNTAX INTEGER { tagged(2), untagged(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is VLAN tag state of the port" ::= { agPortCurCfgTableEntry 3 } agPortCurCfgRmon OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to turn RMON on or off on the port." ::= { agPortCurCfgTableEntry 5 } agPortCurCfgPVID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The default VLAN ID for the port." ::= { agPortCurCfgTableEntry 6 } agPortCurCfgFastEthAutoNeg OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to turn the autonegotiation on or off for fast Ethernet connection." ::= { agPortCurCfgTableEntry 7 } agPortCurCfgFastEthSpeed OBJECT-TYPE SYNTAX INTEGER { mbs10(2), mbs100(3), any(4), mbs1000(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the port speed for fast Ethernet connection." ::= { agPortCurCfgTableEntry 8 } agPortCurCfgFastEthMode OBJECT-TYPE SYNTAX INTEGER { full-duplex(2), half-duplex(3), full-or-half-duplex(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to select port mode for fast Ethernet connection." ::= { agPortCurCfgTableEntry 9 } agPortCurCfgFastEthFctl OBJECT-TYPE SYNTAX INTEGER { transmit(2), receive(3), both(4), none(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the port flow control for fast Ethernet connection." ::= { agPortCurCfgTableEntry 10 } agPortCurCfgGigEthAutoNeg OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to turn the autonegotiation on or off for gigabit Ethernet connection." ::= { agPortCurCfgTableEntry 11 } agPortCurCfgGigEthFctl OBJECT-TYPE SYNTAX INTEGER { transmit(2), receive(3), both(4), none(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to select port flow control for gigabit Ethernet connection." ::= { agPortCurCfgTableEntry 12 } agPortCurCfgPortName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port name." ::= { agPortCurCfgTableEntry 13 } agPortCurCfgBwmContract OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port Bandwidth Management contract number." ::= { agPortCurCfgTableEntry 14 } agPortCurCfgDiscardNonIPs OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable to discard all non-IP traffic on the switch port." ::= { agPortCurCfgTableEntry 15 } agPortCurCfgLinkTrap OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise." ::= { agPortCurCfgTableEntry 16 } agPortCurCfgPreferred OBJECT-TYPE SYNTAX INTEGER { copper(1), sfp(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to set the preferred port. Valid only on dual ports." ::= { agPortCurCfgTableEntry 17 } agPortCurCfgBackup OBJECT-TYPE SYNTAX INTEGER { none(2), copper(3), sfp(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to set the backup port. Valid only on dual ports." ::= { agPortCurCfgTableEntry 18 } agPortCurCfgEgressBW OBJECT-TYPE SYNTAX DisplayString (SIZE(0..9)) MAX-ACCESS read-only STATUS current DESCRIPTION "The configured egress bandwidth limit for this port. This is the maximum egress bandwidth available to this port if BWM is on." ::= { agPortCurCfgTableEntry 19 } agPortCurCfgNonIPBwmContract OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The BWM contract for non-IP traffic." ::= { agPortCurCfgTableEntry 20 } agPortCurCfgGigEthSpeed OBJECT-TYPE SYNTAX INTEGER { mbs10(2), mbs100(3), any(4), mbs1000(5) ,mbs10000(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the port speed for Gigabit Ethernet connection." ::= { agPortCurCfgTableEntry 21 } agPortCurCfgGigEthMode OBJECT-TYPE SYNTAX INTEGER { full-duplex(2), half-duplex(3), full-or-half-duplex(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to select port mode for Gigabit Ethernet connection." ::= { agPortCurCfgTableEntry 22 } agPortCurCfgPortAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "The switch port alias." ::= { agPortCurCfgTableEntry 24 } agPortCurCfgPortStp OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is the state of the Spanning Tree." ::= { agPortCurCfgTableEntry 26 } agPortCurCfgPortIpFwd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is the state of the IP Forwarding." ::= { agPortCurCfgTableEntry 27 } agPortNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgPortNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of port configuration in the new_configuration block." ::= { agPortConfig 3 } agPortNewCfgTableEntry OBJECT-TYPE SYNTAX AgPortNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the port configuration table in the new_configuration block." INDEX { agPortNewCfgIndx } ::= { agPortNewCfgTable 1 } AgPortNewCfgTableEntry ::= SEQUENCE { agPortNewCfgIndx Integer32, agPortNewCfgState INTEGER, agPortNewCfgVlanTag INTEGER, agPortNewCfgRmon INTEGER, agPortNewCfgPVID Integer32, agPortNewCfgFastEthAutoNeg INTEGER, agPortNewCfgFastEthSpeed INTEGER, agPortNewCfgFastEthMode INTEGER, agPortNewCfgFastEthFctl INTEGER, agPortNewCfgGigEthAutoNeg INTEGER, agPortNewCfgGigEthFctl INTEGER, agPortNewCfgPortName DisplayString, agPortNewCfgBwmContract Integer32, agPortNewCfgDiscardNonIPs INTEGER, agPortNewCfgLinkTrap INTEGER, agPortNewCfgPreferred INTEGER, agPortNewCfgBackup INTEGER, agPortNewCfgEgressBW DisplayString, agPortNewCfgNonIPBwmContract Integer32, agPortNewCfgGigEthSpeed INTEGER, agPortNewCfgGigEthMode INTEGER, agPortNewCfgPortAlias DisplayString, agPortNewCfgPortName DisplayString, agPortNewCfgPortStp INTEGER, agPortNewCfgPortIpFwd INTEGER } agPortNewCfgIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the row in port configurations table." ::= { agPortNewCfgTableEntry 1 } agPortNewCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the state of the port." ::= { agPortNewCfgTableEntry 2 } agPortNewCfgVlanTag OBJECT-TYPE SYNTAX INTEGER { tagged(2), untagged(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is VLAN tag state of the port" ::= { agPortNewCfgTableEntry 3 } agPortNewCfgRmon OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to turn RMON on or off on the port." ::= { agPortNewCfgTableEntry 5 } agPortNewCfgPVID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The default VLAN ID for the port." ::= { agPortNewCfgTableEntry 6 } agPortNewCfgFastEthAutoNeg OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to turn the autonegotiation on or off for fast Ethernet connection." ::= { agPortNewCfgTableEntry 7 } agPortNewCfgFastEthSpeed OBJECT-TYPE SYNTAX INTEGER { mbs10(2), mbs100(3), any(4), mbs1000(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the port speed for fast Ethernet connection." ::= { agPortNewCfgTableEntry 8 } agPortNewCfgFastEthMode OBJECT-TYPE SYNTAX INTEGER { full-duplex(2), half-duplex(3), full-or-half-duplex(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to select port mode for fast Ethernet connection." ::= { agPortNewCfgTableEntry 9 } agPortNewCfgFastEthFctl OBJECT-TYPE SYNTAX INTEGER { transmit(2), receive(3), both(4), none(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the port flow control for fast Ethernet connection." ::= { agPortNewCfgTableEntry 10 } agPortNewCfgGigEthAutoNeg OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to turn the autonegotiation on or off for gigabit Ethernet connection." ::= { agPortNewCfgTableEntry 11 } agPortNewCfgGigEthFctl OBJECT-TYPE SYNTAX INTEGER { transmit(2), receive(3), both(4), none(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to select port flow control for gigabit Ethernet connection." ::= { agPortNewCfgTableEntry 12 } agPortNewCfgPortName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "The switch port name." ::= { agPortNewCfgTableEntry 13 } agPortNewCfgBwmContract OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The switch port Bandwidth Management contract number." ::= { agPortNewCfgTableEntry 14 } agPortNewCfgDiscardNonIPs OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable to discard all non-IP traffic on the switch port." ::= { agPortNewCfgTableEntry 15 } agPortNewCfgLinkTrap OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise." ::= { agPortNewCfgTableEntry 16 } agPortNewCfgPreferred OBJECT-TYPE SYNTAX INTEGER { copper(1), sfp(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to set the preferred port. Valid only on dual ports." ::= { agPortNewCfgTableEntry 17 } agPortNewCfgBackup OBJECT-TYPE SYNTAX INTEGER { none(1), copper(2), sfp(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to set the backup port. Valid only on dual ports." ::= { agPortNewCfgTableEntry 18 } agPortNewCfgEgressBW OBJECT-TYPE SYNTAX DisplayString (SIZE(0..9)) MAX-ACCESS read-write STATUS current DESCRIPTION "The configured egress bandwidth limit for this port. This is the maximum egress bandwidth available to this port if BWM is on." ::= { agPortNewCfgTableEntry 19 } agPortNewCfgNonIPBwmContract OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The BWM contract for non-IP traffic" ::= { agPortNewCfgTableEntry 20 } agPortNewCfgGigEthSpeed OBJECT-TYPE SYNTAX INTEGER { mbs10(2), mbs100(3), any(4), mbs1000(5) ,mbs10000(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the port speed for Gigabit Ethernet connection." ::= { agPortNewCfgTableEntry 21 } agPortNewCfgGigEthMode OBJECT-TYPE SYNTAX INTEGER { full-duplex(2), half-duplex(3), full-or-half-duplex(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to select port mode for Gigabit Ethernet connection." ::= { agPortNewCfgTableEntry 22 } agPortNewCfgPortAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "The switch port alias." ::= { agPortNewCfgTableEntry 24 } agPortNewCfgPortStp OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the state of the spanning tree." ::= { agPortNewCfgTableEntry 26 } agPortNewCfgPortIpFwd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the state of the IP Forwarding." ::= { agPortNewCfgTableEntry 27 } -- Agent Fast Forwarding Port Table -- RADIUS Configuration radCurCfgPrimaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the Primary RADIUS server." ::= { agRadiusConfig 1 } radNewCfgPrimaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the Primary RADIUS server." ::= { agRadiusConfig 2 } radCurCfgSecondaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the Secondary RADIUS server." ::= { agRadiusConfig 3 } radNewCfgSecondaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the Secondary RADIUS server." ::= { agRadiusConfig 4 } radCurCfgPort OBJECT-TYPE SYNTAX INTEGER (1500..3000) MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the RADIUS port number." ::= { agRadiusConfig 5 } radNewCfgPort OBJECT-TYPE SYNTAX INTEGER (1500..3000) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the RADIUS port number." ::= { agRadiusConfig 6 } radCurCfgTimeout OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of seconds before resending authentication to RADIUS server." ::= { agRadiusConfig 7 } radNewCfgTimeout OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of seconds before resending authentication to RADIUS server." ::= { agRadiusConfig 8 } radCurCfgRetries OBJECT-TYPE SYNTAX INTEGER (1..3) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of retries to the RADIUS server." ::= { agRadiusConfig 9 } radNewCfgRetries OBJECT-TYPE SYNTAX INTEGER (1..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of retries to the RADIUS server." ::= { agRadiusConfig 10 } radCurCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disbale RADIUS authentication." ::= { agRadiusConfig 11 } radNewCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable RADIUS authentication." ::= { agRadiusConfig 12 } radCurCfgAuthenString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The RADIUS authentication string." ::= { agRadiusConfig 13 } radNewCfgAuthenString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The RADIUS authentication string." ::= { agRadiusConfig 14 } radCurCfgTelnet OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disbale RADIUS backdoor for telnet." ::= { agRadiusConfig 15 } radNewCfgTelnet OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable RADIUS backdoor for telnet." ::= { agRadiusConfig 16 } radCurCfgAuthenSecondString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The second RADIUS authentication string." ::= { agRadiusConfig 17 } radNewCfgAuthenSecondString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The second RADIUS authentication string." ::= { agRadiusConfig 18 } radCurCfgSecBd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disbale RADIUS secure backdoor for telnet." ::= { agRadiusConfig 19 } radNewCfgSecBd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable RADIUS secure backdoor for telnet." ::= { agRadiusConfig 20 } radCurCfgPrimaryIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address of the Primary RADIUS server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agRadiusConfig 21 } radNewCfgPrimaryIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv6 address of the Primary RADIUS server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agRadiusConfig 22 } radCurCfgSecondaryIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address of the Secondary RADIUS server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agRadiusConfig 23 } radNewCfgSecondaryIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv6 address of the Secondary RADIUS server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agRadiusConfig 24 } -- NTP Configuration agCurCfgNTPServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The NTP Server Address." ::= { agNTP 1 } agNewCfgNTPServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The NTP Server Address." ::= { agNTP 2 } agCurCfgNTPResyncInterval OBJECT-TYPE SYNTAX INTEGER (1..44640) MAX-ACCESS read-only STATUS current DESCRIPTION "The NTP Server resync interval in minutes." ::= { agNTP 3 } agNewCfgNTPResyncInterval OBJECT-TYPE SYNTAX INTEGER (1..44640) MAX-ACCESS read-write STATUS current DESCRIPTION "The NTP Server resync interval in minutes." ::= { agNTP 4 } agCurCfgNTPTzoneHHMM OBJECT-TYPE SYNTAX DisplayString (SIZE(0..6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The NTP Server timezone offset from GMT formatted as (+/-)HH:MM." ::= { agNTP 5 } agNewCfgNTPTzoneHHMM OBJECT-TYPE SYNTAX DisplayString (SIZE(0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "The NTP Server timezone offset from GMT formatted as (+/-)HH:MM. The valid range is from -12:59 to +12:59." ::= { agNTP 6 } agCurCfgNTPDlight OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable daylight savings time." ::= { agNTP 7 } agNewCfgNTPDlight OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable daylight savings time." ::= { agNTP 8 } agCurCfgNTPService OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable NTP Service." ::= { agNTP 9 } agNewCfgNTPService OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable NTP Service." ::= { agNTP 10 } agCurCfgNTPSecServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Secondary NTP Server Address." ::= { agNTP 11 } agNewCfgNTPSecServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Secondary NTP Server Address." ::= { agNTP 12 } agCurCfgNTPServerIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address of the Primary NTP server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agNTP 13 } agNewCfgNTPServerIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv6 address of the Primary NTP server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agNTP 14 } agCurCfgNTPSecServerIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address of the Secondary NTP server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agNTP 15 } agNewCfgNTPSecServerIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv6 address of the Secondary NTP server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agNTP 16 } -- APPLY Configuration agApplyPending OBJECT-TYPE SYNTAX INTEGER { applyNeeded(2), noApplyNeeded(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user then can apply the changes by setting proper value to the object agApplyConfiguration described above." ::= { agApply 1 } agApplyConfig OBJECT-TYPE SYNTAX INTEGER { apply(1), idle(2), inprogress(3), complete(4), failed(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is read the current state is returned. idle(2) indicates that there is no apply in progess. complete(4) indicates that the last apply operation is completed. Setting the value to apply(1), will write all the changes made since the last apply to the current configuration block. If the apply is successful this variable will return the state 'complete' else it will return 'failed'. In case of failure, to read the reason for failure use the agApplyTable. Once the operation is completed or the agApplyTable is read in case of failure, the apply buffer needs to be freed and the agApplyState should be set back to 'idle' state so others can issue the apply command via SNMP." ::= { agApply 2 } agApplyTableSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of strings in the apply table." ::= { agApply 4 } agApplyTable OBJECT-TYPE SYNTAX SEQUENCE OF AgApplyTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of URL path for URL load balancing in the current_config." ::= { agApply 5 } agApplyTableEntry OBJECT-TYPE SYNTAX AgApplyTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an URL path for URL load balancing." INDEX { agApplyIndex } ::= { agApplyTable 1 } AgApplyTableEntry ::= SEQUENCE { agApplyIndex Integer32, agApplyString OCTET STRING } agApplyIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The table index." ::= { agApplyTableEntry 1 } agApplyString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "A string in the apply table." ::= { agApplyTableEntry 2 } -- Mgmt Port Config agMgmtCurCfgIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the management port." ::= { agMgmt 1 } agMgmtNewCfgIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the management port." ::= { agMgmt 2 } agMgmtCurCfgMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The subnet mask of the management port." ::= { agMgmt 3 } agMgmtNewCfgMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The subnet mask of the management port." ::= { agMgmt 4 } agMgmtCurCfgGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The default gateway for the management port." ::= { agMgmt 7 } agMgmtNewCfgGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The default gateway for the management port." ::= { agMgmt 8 } agMgmtCurCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable management port." ::= { agMgmt 9 } agMgmtNewCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable management port." ::= { agMgmt 10 } agMgmtCurCfgNtp OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies NTP access is over management port or data port." ::= { agMgmt 11 } agMgmtNewCfgNtp OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies NTP access is over management port or data port." ::= { agMgmt 12 } agMgmtCurCfgRadius OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies RADIUS server access is over management port or data port." ::= { agMgmt 13 } agMgmtNewCfgRadius OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies RADIUS server access is over management port or data port." ::= { agMgmt 14 } agMgmtCurCfgSmtp OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies SMTP access is over management port or data port." ::= { agMgmt 15 } agMgmtNewCfgSmtp OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies SMTP access is over management port or data port." ::= { agMgmt 16 } agMgmtCurCfgSnmp OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies SNMP trap host access is over management port or data port." ::= { agMgmt 17 } agMgmtNewCfgSnmp OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies SNMP trap host access is over management port or data port." ::= { agMgmt 18 } agMgmtCurCfgSyslog OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies syslog host access is over management port or data port." ::= { agMgmt 19 } agMgmtNewCfgSyslog OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies syslog host access is over management port or data port." ::= { agMgmt 20 } agMgmtCurCfgTftp OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies TFTP access is over management port or data port." ::= { agMgmt 21 } agMgmtNewCfgTftp OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies TFTP access is over management port or data port." ::= { agMgmt 22 } agMgmtCurCfgDns OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies DNS access is over management port or data port." ::= { agMgmt 24 } agMgmtNewCfgDns OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies DNS access is over management port or data port." ::= { agMgmt 25 } agMgmtCurCfgTacacs OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies TACACS+ server access is over management port or data port." ::= { agMgmt 26 } agMgmtNewCfgTacacs OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies TACACS+ server access is over management port or data port." ::= { agMgmt 27 } agMgmtCurCfgIntr OBJECT-TYPE SYNTAX INTEGER (0..60) MAX-ACCESS read-only STATUS current DESCRIPTION "The management port gateway health check interval (in seconds)." ::= { agMgmt 28 } agMgmtNewCfgIntr OBJECT-TYPE SYNTAX INTEGER (0..60) MAX-ACCESS read-write STATUS current DESCRIPTION "The management port gateway health check interval (in seconds)." ::= { agMgmt 29 } agMgmtCurCfgRetry OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-only STATUS current DESCRIPTION "The management port gateway retries before out of service." ::= { agMgmt 30 } agMgmtNewCfgRetry OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-write STATUS current DESCRIPTION "The management port gateway retries before out of service." ::= { agMgmt 31 } agMgmtCurCfgWlm OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies WLM SASP is over management port or data port." ::= { agMgmt 34 } agMgmtNewCfgWlm OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies WLM SASP is over management port or data port." ::= { agMgmt 35 } agMgmtCurCfgReport OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies reporting server is over management port or data port." ::= { agMgmt 36 } agMgmtNewCfgReport OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies reporting server is over management port or data port." ::= { agMgmt 37 } agMgmtCurCfgIpAddr2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the management port." ::= { agMgmt 38 } agMgmtNewCfgIpAddr2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the management port." ::= { agMgmt 39 } agMgmtCurCfgMask2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The subnet mask of the management port." ::= { agMgmt 40 } agMgmtNewCfgMask2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The subnet mask of the management port." ::= { agMgmt 41 } agMgmtCurCfgGateway2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The default gateway for the management port." ::= { agMgmt 44 } agMgmtNewCfgGateway2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The default gateway for the management port." ::= { agMgmt 45 } agMgmtCurCfgState2 OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable management port." ::= { agMgmt 46 } agMgmtNewCfgState2 OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable management port." ::= { agMgmt 47 } agMgmtCurCfgOcsp OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies OCSP access is over management port or data port." ::= { agMgmt 50 } agMgmtNewCfgOcsp OBJECT-TYPE SYNTAX INTEGER { data(1), mgmt(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies OCSP access is over management port or data port." ::= { agMgmt 51 } agMgmtPort OBJECT IDENTIFIER ::= { agMgmt 23 } agMgmtPortCurCfgSpeed OBJECT-TYPE SYNTAX INTEGER { mbs10(1), mbs100(2), mbs1000(3), any(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Set Management port link speed." ::= { agMgmtPort 1 } agMgmtPortNewCfgSpeed OBJECT-TYPE SYNTAX INTEGER { mbs10(1), mbs100(2), mbs1000(3), any(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set Management port link speed." ::= { agMgmtPort 2 } agMgmtPortCurCfgMode OBJECT-TYPE SYNTAX INTEGER { full(1), half(2), any(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Set Management port full or half duplex mode." ::= { agMgmtPort 3 } agMgmtPortNewCfgMode OBJECT-TYPE SYNTAX INTEGER { full(1), half(2), any(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set Management port full or half duplex mode." ::= { agMgmtPort 4 } agMgmtPortCurCfgAuto OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Set Management port autonegotiation." ::= { agMgmtPort 5 } agMgmtPortNewCfgAuto OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set Management port autonegotiation." ::= { agMgmtPort 6 } agMgmtPortCurCfgSpeed2 OBJECT-TYPE SYNTAX INTEGER { mbs10(1), mbs100(2), mbs1000(3), any(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Set Management port2 link speed." ::= { agMgmtPort 7 } agMgmtPortNewCfgSpeed2 OBJECT-TYPE SYNTAX INTEGER { mbs10(1), mbs100(2), mbs1000(3), any(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set Management port2 link speed." ::= { agMgmtPort 8 } agMgmtPortCurCfgMode2 OBJECT-TYPE SYNTAX INTEGER { full(1), half(2), any(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Set Management port2 full or half duplex mode." ::= { agMgmtPort 9 } agMgmtPortNewCfgMode2 OBJECT-TYPE SYNTAX INTEGER { full(1), half(2), any(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set Management port2 full or half duplex mode." ::= { agMgmtPort 10 } agMgmtPortCurCfgAuto2 OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Set Management port2 autonegotiation." ::= { agMgmtPort 11 } agMgmtPortNewCfgAuto2 OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set Management port2 autonegotiation." ::= { agMgmtPort 12 } -- SSL Processor Config agSslprocCurCfgIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The SSL cluster management IP." ::= { agSslproc 1 } agSslprocNewCfgIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The SSL cluster management IP." ::= { agSslproc 2 } agSslprocCurCfgPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The SSL cluster management port." ::= { agSslproc 3 } agSslprocNewCfgPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The SSL cluster management port." ::= { agSslproc 4 } agSslprocCurCfgRts OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable RTS processing." ::= { agSslproc 5 } agSslprocNewCfgRts OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enabled/disable RTS processing." ::= { agSslproc 6 } agSslprocCurCfgFilt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable filtering." ::= { agSslproc 7 } agSslprocNewCfgFilt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enabled/disable filtering." ::= { agSslproc 8 } -- TACACS+ Configuration tacCurCfgPrimaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the Primary TACACS+ server." ::= { agTacacsConfig 1 } tacNewCfgPrimaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the Primary TACACS+ server." ::= { agTacacsConfig 2 } tacCurCfgSecondaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the Secondary TACSACS server." ::= { agTacacsConfig 3 } tacNewCfgSecondaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the Secondary TACACS+ server." ::= { agTacacsConfig 4 } tacCurCfgPort OBJECT-TYPE SYNTAX INTEGER (1..65000) MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the TACACS+ port number." ::= { agTacacsConfig 5 } tacNewCfgPort OBJECT-TYPE SYNTAX INTEGER (1..65000) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the TACACS+ port number." ::= { agTacacsConfig 6 } tacCurCfgTimeout OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of seconds before resending authentication to TACACS+ server." ::= { agTacacsConfig 7 } tacNewCfgTimeout OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of seconds before resending authentication to TACACS+ server." ::= { agTacacsConfig 8 } tacCurCfgRetries OBJECT-TYPE SYNTAX INTEGER (1..3) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of retries to the TACACS+ server." ::= { agTacacsConfig 9 } tacNewCfgRetries OBJECT-TYPE SYNTAX INTEGER (1..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of retries to the TACACS+ server." ::= { agTacacsConfig 10 } tacCurCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disbale TACACS+ authentication." ::= { agTacacsConfig 11 } tacNewCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable TACACS+ authentication." ::= { agTacacsConfig 12 } tacCurCfgAuthenString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The TACACS+ authentication string." ::= { agTacacsConfig 13 } tacNewCfgAuthenString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The TACACS+ authentication string." ::= { agTacacsConfig 14 } tacCurCfgTelnet OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disbale TACACS+ backdoor for telnet." ::= { agTacacsConfig 15 } tacNewCfgTelnet OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable TACACS+ backdoor for telnet." ::= { agTacacsConfig 16 } tacCurCfgAuthenSecondString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The second TACACS+ authentication string." ::= { agTacacsConfig 17 } tacNewCfgAuthenSecondString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The second TACACS+ authentication string." ::= { agTacacsConfig 18 } tacCurCfgCmdAuthor OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disbale TACACS+ command authorization." ::= { agTacacsConfig 19 } tacNewCfgCmdAuthor OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable TACACS+ command authorization." ::= { agTacacsConfig 20 } tacCurCfgCmdLogging OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disbale TACACS+ command logging." ::= { agTacacsConfig 21 } tacNewCfgCmdLogging OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable TACACS+ command logging." ::= { agTacacsConfig 22 } tacCurCfgSecBd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disbale TACACS+ secure backdoor for telnet." ::= { agTacacsConfig 23 } tacNewCfgSecBd OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable TACACS+ secure backdoor for telnet." ::= { agTacacsConfig 24 } tacCurCfgCmap OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/Disable Tacacs+ new prividlege level maping." ::= { agTacacsConfig 25 } tacNewCfgCmap OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Tacacs+ new prividlege level maping." ::= { agTacacsConfig 26 } tacCurCfgPrimaryIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address of the Primary TACACS server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agTacacsConfig 29 } tacNewCfgPrimaryIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv6 address of the Primary TACACS server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agTacacsConfig 30 } tacCurCfgSecondaryIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address of the Secondary TACACS server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agTacacsConfig 31 } tacNewCfgSecondaryIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv6 address of the Secondary TACACS server. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agTacacsConfig 32 } -- Multiple Management network MIB objects agMgmtNetTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in the Management Network Table." ::= { agMgmtNetConfig 1 } agCurCfgMgmtNetTable OBJECT-TYPE SYNTAX SEQUENCE OF AgCurCfgMgmtNetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table for Management Network definitions in the current configuration block." ::= { agMgmtNetConfig 2 } agCurCfgMgmtNetEntry OBJECT-TYPE SYNTAX AgCurCfgMgmtNetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the management network definition table." INDEX { agCurCfgMgmtNetIndex } ::= { agCurCfgMgmtNetTable 1 } AgCurCfgMgmtNetEntry ::= SEQUENCE { agCurCfgMgmtNetIndex Integer32, agCurCfgMgmtNetSubnet IpAddress, agCurCfgMgmtNetMask IpAddress, agCurCfgMgmtNetProtocol INTEGER } agCurCfgMgmtNetIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the Management Network Definition table." ::= { agCurCfgMgmtNetEntry 1 } agCurCfgMgmtNetSubnet OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Management Network Address in the current_configuration block." ::= { agCurCfgMgmtNetEntry 2 } agCurCfgMgmtNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Management Network Mask in the current_configuration block." ::= { agCurCfgMgmtNetEntry 3 } agCurCfgMgmtNetProtocol OBJECT-TYPE SYNTAX INTEGER { ssh(1), telnet(2), sshTelnet(3), http(4), sshHttp(5), telnetHttp(6), sshTelnetHttp(7), https(8), sshHttps(9), httpsTelnet(10), sshTelnetHttps(11), httpHttps(12), sshHttpHttps(13), telnetHttpHttps(14), sshTelnetHttpHttps(15), snmp(16), sshSnmp(17), telnetSnmp(18), sshTelnetSnmp(19), httpSnmp(20), sshHttpSnmp(21), telnetHttpSnmp(22), sshTelnetHttpSnmp(23), httpsSnmp(24), sshHttpsSnmp(25), telnetHttpsSnmp(26), sshTelnetHttpsSnmp(27), httpHttpsSnmp(28), sshHttpHttpsSnmp(29), telnetHttpHttpsSnmp(30), sshTelnetHttpHttpsSnmp(31), none(32) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Management Network Protocol access in the current_configuration block. 1 - Ssh 2 - Telnet 3 - Ssh + Telnet 4 - Http 5 - Ssh + Http 6 - Telnet + Http 7 - Ssh + Telnet + Http 8 - Https 9 - Ssh + Https 10 - Https + Telnet 11 - Ssh + Telnet + Https 12 - Http + Https 13 - Ssh + Http + Https 14 - Telnet + Http + Https 15 - Ssh + Telnet + Http + Https 16 - Snmp 17 - Ssh + Snmp 18 - Telnet + Snmp 19 - Ssh + Telnet + Snmp 20 - Http + Snmp 21 - Ssh + Http + Snmp 22 - Telnet + Http + Snmp 23 - Ssh + Telnet + Http + Snmp 24 - Https + Snmp 25 - Ssh + Https + Snmp 26 - Telnet + Https + Snmp 27 - Ssh + Telnet + Https + Snmp 28 - Http + Https + Snmp 29 - Ssh + Http + Https + Snmp 30 - Telnet + Http + Https + Snmp 31 - Ssh + Telnet + Http + Https + Snmp 32 - none " ::= { agCurCfgMgmtNetEntry 4 } agCurCfgMgmtNet6Table OBJECT-TYPE SYNTAX SEQUENCE OF AgCurCfgMgmtNet6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table for Management Network definitions in the current configuration block." ::= { agMgmtNetConfig 4 } agCurCfgMgmtNet6Entry OBJECT-TYPE SYNTAX AgCurCfgMgmtNet6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the management network definition table." INDEX { agCurCfgMgmtNet6Index } ::= { agCurCfgMgmtNet6Table 1 } AgCurCfgMgmtNet6Entry ::= SEQUENCE { agCurCfgMgmtNet6Index Integer32, agCurCfgMgmtNet6Subnet DisplayString, agCurCfgMgmtNet6Prefix INTEGER, agCurCfgMgmtNet6Protocol INTEGER } agCurCfgMgmtNet6Index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the Management Network Definition table." ::= { agCurCfgMgmtNet6Entry 1 } agCurCfgMgmtNet6Subnet OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION " The IPV6 address of the allowed network over management port. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agCurCfgMgmtNet6Entry 2 } agCurCfgMgmtNet6Prefix OBJECT-TYPE SYNTAX INTEGER (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION " The IPV6 prefix length of the allowed networks on management port. " ::= { agCurCfgMgmtNet6Entry 3 } agCurCfgMgmtNet6Protocol OBJECT-TYPE SYNTAX INTEGER { ssh(1), telnet(2), sshTelnet(3), http(4), sshHttp(5), telnetHttp(6), sshTelnetHttp(7), https(8), sshHttps(9), httpsTelnet(10), sshTelnetHttps(11), httpHttps(12), sshHttpHttps(13), telnetHttpHttps(14), sshTelnetHttpHttps(15), snmp(16), sshSnmp(17), telnetSnmp(18), sshTelnetSnmp(19), httpSnmp(20), sshHttpSnmp(21), telnetHttpSnmp(22), sshTelnetHttpSnmp(23), httpsSnmp(24), sshHttpsSnmp(25), telnetHttpsSnmp(26), sshTelnetHttpsSnmp(27), httpHttpsSnmp(28), sshHttpHttpsSnmp(29), telnetHttpHttpsSnmp(30), sshTelnetHttpHttpsSnmp(31), none(32) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Management Network Protocol access in the current_configuration block. 1 - Ssh 2 - Telnet 3 - Ssh + Telnet 4 - Http 5 - Ssh + Http 6 - Telnet + Http 7 - Ssh + Telnet + Http 8 - Https 9 - Ssh + Https 10 - Https + Telnet 11 - Ssh + Telnet + Https 12 - Http + Https 13 - Ssh + Http + Https 14 - Telnet + Http + Https 15 - Ssh + Telnet + Http + Https 16 - Snmp 17 - Ssh + Snmp 18 - Telnet + Snmp 19 - Ssh + Telnet + Snmp 20 - Http + Snmp 21 - Ssh + Http + Snmp 22 - Telnet + Http + Snmp 23 - Ssh + Telnet + Http + Snmp 24 - Https + Snmp 25 - Ssh + Https + Snmp 26 - Telnet + Https + Snmp 27 - Ssh + Telnet + Https + Snmp 28 - Http + Https + Snmp 29 - Ssh + Http + Https + Snmp 30 - Telnet + Http + Https + Snmp 31 - Ssh + Telnet + Http + Https + Snmp 32 - none " ::= { agCurCfgMgmtNet6Entry 4 } agNewCfgMgmtNetTable OBJECT-TYPE SYNTAX SEQUENCE OF AgNewCfgMgmtNetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table for Management Network definitions in the new configuration block." ::= { agMgmtNetConfig 3 } agNewCfgMgmtNetEntry OBJECT-TYPE SYNTAX AgNewCfgMgmtNetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the management network definition table." INDEX { agNewCfgMgmtNetIndex } ::= { agNewCfgMgmtNetTable 1 } AgNewCfgMgmtNetEntry ::= SEQUENCE { agNewCfgMgmtNetIndex Integer32, agNewCfgMgmtNetSubnet IpAddress, agNewCfgMgmtNetMask IpAddress, agNewCfgMgmtNetDelete INTEGER, agNewCfgMgmtNetProtocol INTEGER } agNewCfgMgmtNetIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the Management Network Definition table." ::= { agNewCfgMgmtNetEntry 1 } agNewCfgMgmtNetSubnet OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The Management Network Address in the new_configuration block." ::= { agNewCfgMgmtNetEntry 2 } agNewCfgMgmtNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The Management Network Mask in the new_configuration block." ::= { agNewCfgMgmtNetEntry 3 } agNewCfgMgmtNetDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "By setting the value to delete(2), the entire row is deleted." ::= { agNewCfgMgmtNetEntry 4 } agNewCfgMgmtNetProtocol OBJECT-TYPE SYNTAX INTEGER { ssh(1), telnet(2), sshTelnet(3), http(4), sshHttp(5), telnetHttp(6), sshTelnetHttp(7), https(8), sshHttps(9), httpsTelnet(10), sshTelnetHttps(11), httpHttps(12), sshHttpHttps(13), telnetHttpHttps(14), sshTelnetHttpHttps(15), snmp(16), sshSnmp(17), telnetSnmp(18), sshTelnetSnmp(19), httpSnmp(20), sshHttpSnmp(21), telnetHttpSnmp(22), sshTelnetHttpSnmp(23), httpsSnmp(24), sshHttpsSnmp(25), telnetHttpsSnmp(26), sshTelnetHttpsSnmp(27), httpHttpsSnmp(28), sshHttpHttpsSnmp(29), telnetHttpHttpsSnmp(30), sshTelnetHttpHttpsSnmp(31), none(32) } MAX-ACCESS read-create STATUS current DESCRIPTION "The Management Network Protocol access in the new_configuration block. 1 - Ssh 2 - Telnet 3 - Ssh + Telnet 4 - Http 5 - Ssh + Http 6 - Telnet + Http 7 - Ssh + Telnet + Http 8 - Https 9 - Ssh + Https 10 - Https + Telnet 11 - Ssh + Telnet + Https 12 - Http + Https 13 - Ssh + Http + Https 14 - Telnet + Http + Https 15 - Ssh + Telnet + Http + Https 16 - Snmp 17 - Ssh + Snmp 18 - Telnet + Snmp 19 - Ssh + Telnet + Snmp 20 - Http + Snmp 21 - Ssh + Http + Snmp 22 - Telnet + Http + Snmp 23 - Ssh + Telnet + Http + Snmp 24 - Https + Snmp 25 - Ssh + Https + Snmp 26 - Telnet + Https + Snmp 27 - Ssh + Telnet + Https + Snmp 28 - Http + Https + Snmp 29 - Ssh + Http + Https + Snmp 30 - Telnet + Http + Https + Snmp 31 - Ssh + Telnet + Http + Https + Snmp 32 - none " ::= { agNewCfgMgmtNetEntry 5 } agNewCfgMgmtNet6Table OBJECT-TYPE SYNTAX SEQUENCE OF AgNewCfgMgmtNet6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table for Management Network definitions in the new configuration block." ::= { agMgmtNetConfig 5 } agNewCfgMgmtNet6Entry OBJECT-TYPE SYNTAX AgNewCfgMgmtNet6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the management network definition table." INDEX { agNewCfgMgmtNet6Index } ::= { agNewCfgMgmtNet6Table 1 } AgNewCfgMgmtNet6Entry ::= SEQUENCE { agNewCfgMgmtNet6Index Integer32, agNewCfgMgmtNet6Subnet DisplayString, agNewCfgMgmtNet6Prefix INTEGER, agNewCfgMgmtNet6Protocol INTEGER, agNewCfgMgmtNet6Delete INTEGER } agNewCfgMgmtNet6Index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the Management Network Definition table." ::= { agNewCfgMgmtNet6Entry 1 } agNewCfgMgmtNet6Subnet OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION " The IPV6 address of the allowed network over management port. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agNewCfgMgmtNet6Entry 2 } agNewCfgMgmtNet6Prefix OBJECT-TYPE SYNTAX INTEGER (1..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The IPV6 prefix length of the allowed network management port. " ::= { agNewCfgMgmtNet6Entry 3 } agNewCfgMgmtNet6Protocol OBJECT-TYPE SYNTAX INTEGER { ssh(1), telnet(2), sshTelnet(3), http(4), sshHttp(5), telnetHttp(6), sshTelnetHttp(7), https(8), sshHttps(9), httpsTelnet(10), sshTelnetHttps(11), httpHttps(12), sshHttpHttps(13), telnetHttpHttps(14), sshTelnetHttpHttps(15), snmp(16), sshSnmp(17), telnetSnmp(18), sshTelnetSnmp(19), httpSnmp(20), sshHttpSnmp(21), telnetHttpSnmp(22), sshTelnetHttpSnmp(23), httpsSnmp(24), sshHttpsSnmp(25), telnetHttpsSnmp(26), sshTelnetHttpsSnmp(27), httpHttpsSnmp(28), sshHttpHttpsSnmp(29), telnetHttpHttpsSnmp(30), sshTelnetHttpHttpsSnmp(31), none(32) } MAX-ACCESS read-create STATUS current DESCRIPTION "The Management Network Protocol access in the current_configuration block. 1 - Ssh 2 - Telnet 3 - Ssh + Telnet 4 - Http 5 - Ssh + Http 6 - Telnet + Http 7 - Ssh + Telnet + Http 8 - Https 9 - Ssh + Https 10 - Https + Telnet 11 - Ssh + Telnet + Https 12 - Http + Https 13 - Ssh + Http + Https 14 - Telnet + Http + Https 15 - Ssh + Telnet + Http + Https 16 - Snmp 17 - Ssh + Snmp 18 - Telnet + Snmp 19 - Ssh + Telnet + Snmp 20 - Http + Snmp 21 - Ssh + Http + Snmp 22 - Telnet + Http + Snmp 23 - Ssh + Telnet + Http + Snmp 24 - Https + Snmp 25 - Ssh + Https + Snmp 26 - Telnet + Https + Snmp 27 - Ssh + Telnet + Https + Snmp 28 - Http + Https + Snmp 29 - Ssh + Http + Https + Snmp 30 - Telnet + Http + Https + Snmp 31 - Ssh + Telnet + Http + Https + Snmp 32 - none " ::= { agNewCfgMgmtNet6Entry 4 } agNewCfgMgmtNet6Delete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "By setting the value to delete(2), the entire row is deleted." ::= { agNewCfgMgmtNet6Entry 5 } -- Pattern Matching Group MIB objects agPgrpMatchTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in the Pattern Match Group Table." ::= { agPgroup 1 } agCurCfgPgrpMatchTable OBJECT-TYPE SYNTAX SEQUENCE OF AgCurCfgPgrpMatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table for Pattern Match Group definitions in the current configuration block." ::= { agPgroup 2 } agCurCfgPgrpMatchEntry OBJECT-TYPE SYNTAX AgCurCfgPgrpMatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the Pattern Match Group table." INDEX { agCurCfgPgrpMatchIndex } ::= { agCurCfgPgrpMatchTable 1 } AgCurCfgPgrpMatchEntry ::= SEQUENCE { agCurCfgPgrpMatchIndex Integer32, agCurCfgPgrpName DisplayString, agCurCfgPgrpMatchBmap OCTET STRING } agCurCfgPgrpMatchIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the Pattern Match Group Definition table." ::= { agCurCfgPgrpMatchEntry 1 } agCurCfgPgrpName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name for the Pattern Match Group." ::= { agCurCfgPgrpMatchEntry 2 } agCurCfgPgrpMatchBmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The pattern matching rules applied to the port. The pattern rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ string 9 || || || ||___ string 8 || |____ string 7 || . . . ||_________ string 2 |__________ string 1 (as index to slbCurCfgUrlLbPathTable) where x : 1 - The represented string matching rule applied 0 - The represented string matching rule applied" ::= { agCurCfgPgrpMatchEntry 3 } agNewCfgPgrpMatchTable OBJECT-TYPE SYNTAX SEQUENCE OF AgNewCfgPgrpMatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table for Pattern Match Group definitions in the new configuration block." ::= { agPgroup 3 } agNewCfgPgrpMatchEntry OBJECT-TYPE SYNTAX AgNewCfgPgrpMatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the Pattern Match Group definition table." INDEX { agNewCfgPgrpMatchIndex } ::= { agNewCfgPgrpMatchTable 1 } AgNewCfgPgrpMatchEntry ::= SEQUENCE { agNewCfgPgrpMatchIndex Integer32, agNewCfgPgrpName DisplayString, agNewCfgPgrpMatchAdd Integer32, agNewCfgPgrpMatchRem Integer32, agNewCfgPgrpMatchBmap OCTET STRING, agNewCfgPgrpDelete INTEGER } agNewCfgPgrpMatchIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the Pattern Match Group Definition table." ::= { agNewCfgPgrpMatchEntry 1 } agNewCfgPgrpName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name for the Pattern Match Group." ::= { agNewCfgPgrpMatchEntry 2 } agNewCfgPgrpMatchAdd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Pattern Match Group String added in the new_configuration block." ::= { agNewCfgPgrpMatchEntry 3 } agNewCfgPgrpMatchRem OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Pattern Match Group String removed in the new_configuration block." ::= { agNewCfgPgrpMatchEntry 4 } agNewCfgPgrpMatchBmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The pattern matching rules applied to the port. The pattern rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ string 9 || || || ||___ string 8 || |____ string 7 || . . . ||_________ string 2 |__________ string 1 (as index to slbCurCfgUrlLbPathTable) where x : 1 - The represented string matching rule applied 0 - The represented string matching rule applied" ::= { agNewCfgPgrpMatchEntry 5 } agNewCfgPgrpDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "By setting the value to delete(2), the entire row is deleted." ::= { agNewCfgPgrpMatchEntry 6 } agCfgSecurityPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AgCfgSecurityPortTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Security related features enabled/disabled for this port." ::= { agSecurity 2 } agCfgSecurityPortTableEntry OBJECT-TYPE SYNTAX AgCfgSecurityPortTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the Security related in the current configuration block." INDEX { agCfgSecurityPortIndx } ::= { agCfgSecurityPortTable 1 } AgCfgSecurityPortTableEntry ::= SEQUENCE { agCfgSecurityPortIndx Integer32, agCurCfgSecurityDosState INTEGER, agNewCfgSecurityDosState INTEGER, agCurCfgSecurityIpAclState INTEGER, agNewCfgSecurityIpAclState INTEGER, agCurCfgSecurityUbState INTEGER, agNewCfgSecurityUbState INTEGER, agCurCfgSecurityBogonState INTEGER, agCurCfgSecurityAttacksBmap OCTET STRING, agNewCfgSecurityAttacksBmap OCTET STRING, agNewCfgSecurityAddAttack INTEGER, agNewCfgSecurityRemAttack INTEGER, agNewCfgSecurityDoSAttacks INTEGER, agNewCfgSecurityBogonState INTEGER } agCfgSecurityPortIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port index." ::= { agCfgSecurityPortTableEntry 1 } agCurCfgSecurityDosState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/Disable DOS attack per port." ::= { agCfgSecurityPortTableEntry 2 } agNewCfgSecurityDosState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable DOS attack per port." ::= { agCfgSecurityPortTableEntry 3 } agCurCfgSecurityIpAclState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/Disable IP ACL per port." ::= { agCfgSecurityPortTableEntry 4 } agNewCfgSecurityIpAclState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable IP ACL per port." ::= { agCfgSecurityPortTableEntry 5 } agCurCfgSecurityUbState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/Disable UDP Blast per port." ::= { agCfgSecurityPortTableEntry 6 } agNewCfgSecurityUbState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable UDP Blast per port." ::= { agCfgSecurityPortTableEntry 7 } agCurCfgSecurityBogonState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/Disable Bogon IP ACL per port." ::= { agCfgSecurityPortTableEntry 8 } agNewCfgSecurityBogonState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Bogon IP ACL per port." ::= { agCfgSecurityPortTableEntry 9 } -- MIBs for perPort DoS Attacks add/rem agCurCfgSecurityAttacksBmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The DoS Attacks added/removed for this port. The selected DoS Attacks are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_______ 9 || || || ||_________ 8 || |__________ 7 || . . . ||________________ 2 |________________ 1 1 - IPLen 2 - IPVersion 3 - Broadcast 4 - Loopback 5 - Land 6 - IPReserved 7 - IPTTL 8 - IPProt 9 - IPOptLen 10 - FragMoreDont 11 - FragData 12 - FragBoundary 13 - FragLast 14 - FragDontOff 15 - FragOpt 16 - FragOff 17 - FragOversize 18 - TCPLen 19 - TCPPortZero 20 - BlatAttack 21 - TCPReserved 22 - NullScanAttack 23 - FullXmasScan 24 - FinScan 25 - VecnaScan 26 - XmasScanAttack 27 - SynFinScan 28 - FlagAbnormal 29 - SYNData 30 - SYNFrag 31 - FTPPort 32 - DNSPort 33 - SeqZero 34 - AckZero 35 - TCPOptLen 36 - UDPLen 37 - UDPPortZero 38 - FraggleAttack 39 - Pepsi 40 - Rc8 41 - SNMPNull 42 - ICMPLen 43 - SmurfAttack 44 - ICMPData 45 - ICMPOff 46 - ICMPType 47 - IGMPLen 48 - IGMPFrag 49 - IGMPType 50 - ARPLen 51 - ARPNbCast 52 - ARPNuCast 53 - ARPSpoof 54 - GARP 55 - IP6Len 56 - IP6Version where x : 1 - The represented DoS Attack is enabled 0 - The represented DoS Attack is disabled" ::= { agCfgSecurityPortTableEntry 10 } agNewCfgSecurityAttacksBmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The DoS Attacks added/removed for this port. The selected DoS Attacks are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |______ 9 || || || ||________ 8 || |_________ 7 || . . . ||_______________ 2 |________________ 1 1 - IPLen 2 - IPVersion 3 - Broadcast 4 - Loopback 5 - Land 6 - IPReserved 7 - IPTTL 8 - IPProt 9 - IPOptLen 10 - FragMoreDont 11 - FragData 12 - FragBoundary 13 - FragLast 14 - FragDontOff 15 - FragOpt 16 - FragOff 17 - FragOversize 18 - TCPLen 19 - TCPPortZero 20 - BlatAttack 21 - TCPReserved 22 - NullScanAttack 23 - FullXmasScan 24 - FinScan 25 - VecnaScan 26 - XmasScanAttack 27 - SynFinScan 28 - FlagAbnormal 29 - SYNData 30 - SYNFrag 31 - FTPPort 32 - DNSPort 33 - SeqZero 34 - AckZero 35 - TCPOptLen 36 - UDPLen 37 - UDPPortZero 38 - FraggleAttack 39 - Pepsi 40 - Rc8 41 - SNMPNull 42 - ICMPLen 43 - SmurfAttack 44 - ICMPData 45 - ICMPOff 46 - ICMPType 47 - IGMPLen 48 - IGMPFrag 49 - IGMPType 50 - ARPLen 51 - ARPNbCast 52 - ARPNuCast 53 - ARPSpoof 54 - GARP 55 - IP6Len 56 - IP6Version where x : 1 - The represented DoS Attack is enabled 0 - The represented DoS Attack is disabled" ::= { agCfgSecurityPortTableEntry 11 } agNewCfgSecurityAddAttack OBJECT-TYPE SYNTAX INTEGER { iplen(1), ipversion(2), broadcast(3), loopback(4), land(5), ipreserved(6), ipttl(7), ipprot(8), ipoptlen(9), fragmoredont(10), fragdata(11), fragboundary(12), fraglast(13), fragdontoff(14), fragopt(15), fragoff(16), fragoversize(17), tcplen(18), tcpportzero(19), blat(20), tcpreserved(21), nullscan(22), fullxmasscan(23), finscan(24), vecnascan(25), xmassscan(26), synfinscan(27), flagabnormal(28), syndata(29), synfrag(30), ftpport(31), dnsport(32), seqzero(33), ackzero(34), tcpoptlen(35), udplen(36), udpportzero(37), fraggle(38), pepsi(39), rc8(40), snmpnull(41), icmplen(42), smurf(43), icmpdata(44), icmpoff(45), icmptype(46), igmplen(47), igmpfrag(48), igmptype(49), arplen(50), arpnbcast(51), arpnucast(52), arpspoof(53), garp(54), ip6len(55), ip6version(56) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to add a DoS Attack to a port. The value specified with this object is number given in this description. 1 - IPLen 2 - IPVersion 3 - Broadcast 4 - Loopback 5 - Land 6 - IPReserved 7 - IPTTL 8 - IPProt 9 - IPOptLen 10 - FragMoreDont 11 - FragData 12 - FragBoundary 13 - FragLast 14 - FragDontOff 15 - FragOpt 16 - FragOff 17 - FragOversize 18 - TCPLen 19 - TCPPortZero 20 - BlatAttack 21 - TCPReserved 22 - NullScanAttack 23 - FullXmasScan 24 - FinScan 25 - VecnaScan 26 - XmasScanAttack 27 - SynFinScan 28 - FlagAbnormal 29 - SYNData 30 - SYNFrag 31 - FTPPort 32 - DNSPort 33 - SeqZero 34 - AckZero 35 - TCPOptLen 36 - UDPLen 37 - UDPPortZero 38 - FraggleAttack 39 - Pepsi 40 - Rc8 41 - SNMPNull 42 - ICMPLen 43 - SmurfAttack 44 - ICMPData 45 - ICMPOff 46 - ICMPType 47 - IGMPLen 48 - IGMPFrag 49 - IGMPType 50 - ARPLen 51 - ARPNbCast 52 - ARPNuCast 53 - ARPSpoof 54 - GARP 55 - IP6Len 56 - IP6Version When read, the value '0' is returned always." ::= { agCfgSecurityPortTableEntry 12 } agNewCfgSecurityRemAttack OBJECT-TYPE SYNTAX INTEGER { iplen(1), ipversion(2), broadcast(3), loopback(4), land(5), ipreserved(6), ipttl(7), ipprot(8), ipoptlen(9), fragmoredont(10), fragdata(11), fragboundary(12), fraglast(13), fragdontoff(14), fragopt(15), fragoff(16), fragoversize(17), tcplen(18), tcpportzero(19), blat(20), tcpreserved(21), nullscan(22), fullxmasscan(23), finscan(24), vecnascan(25), xmassscan(26), synfinscan(27), flagabnormal(28), syndata(29), synfrag(30), ftpport(31), dnsport(32), seqzero(33), ackzero(34), tcpoptlen(35), udplen(36), udpportzero(37), fraggle(38), pepsi(39), rc8(40), snmpnull(41), icmplen(42), smurf(43), icmpdata(44), icmpoff(45), icmptype(46), igmplen(47), igmpfrag(48), igmptype(49), arplen(50), arpnbcast(51), arpnucast(52), arpspoof(53), garp(54), ip6len(55), ip6version(56) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object to remove a DoS attack for a port. The value specified with this object is number given in this description. 1 - IPLen 2 - IPVersion 3 - Broadcast 4 - Loopback 5 - Land 6 - IPReserved 7 - IPTTL 8 - IPProt 9 - IPOptLen 10 - FragMoreDont 11 - FragData 12 - FragBoundary 13 - FragLast 14 - FragDontOff 15 - FragOpt 16 - FragOff 17 - FragOversize 18 - TCPLen 19 - TCPPortZero 20 - BlatAttack 21 - TCPReserved 22 - NullScanAttack 23 - FullXmasScan 24 - FinScan 25 - VecnaScan 26 - XmasScanAttack 27 - SynFinScan 28 - FlagAbnormal 29 - SYNData 30 - SYNFrag 31 - FTPPort 32 - DNSPort 33 - SeqZero 34 - AckZero 35 - TCPOptLen 36 - UDPLen 37 - UDPPortZero 38 - FraggleAttack 39 - Pepsi 40 - Rc8 41 - SNMPNull 42 - ICMPLen 43 - SmurfAttack 44 - ICMPData 45 - ICMPOff 46 - ICMPType 47 - IGMPLen 48 - IGMPFrag 49 - IGMPType 50 - ARPLen 51 - ARPNbCast 52 - ARPNuCast 53 - ARPSpoof 54 - GARP 55 - IP6Len 56 - IP6Version When read, the value '0' is returned always." ::= { agCfgSecurityPortTableEntry 13 } agNewCfgSecurityDoSAttacks OBJECT-TYPE SYNTAX INTEGER { ok(1), addall(2), remall(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Add all DoS attacks to the port by setting the value to '2'. Remove all DoS attacks from the port by setting the value to '3'. Do nothing by setting the value to '1'. When read, the value '0' is returned always." ::= { agCfgSecurityPortTableEntry 14 } -- IP_ACL: IP Address ACL Configuration ipAclTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the IP ACL table." ::= { ipAclCfg 1 } ipAclCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF IpAclCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP ACL in the current configuration block." ::= { ipAclCfg 2 } ipAclCurCfgEntry OBJECT-TYPE SYNTAX IpAclCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the IP ACL table" INDEX { ipAclCurCfgIndx } ::= { ipAclCurCfgTable 1 } IpAclCurCfgEntry ::= SEQUENCE { ipAclCurCfgIndx Integer32, ipAclCurCfgIp IpAddress, ipAclCurCfgMask IpAddress } ipAclCurCfgIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the IP ACL table." ::= { ipAclCurCfgEntry 1} ipAclCurCfgIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the entry." ::= { ipAclCurCfgEntry 2} ipAclCurCfgMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address Mask of the entry." ::= { ipAclCurCfgEntry 3} ipAclNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF IpAclNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP ACL in the new configuration block." ::= { ipAclCfg 3 } ipAclNewCfgEntry OBJECT-TYPE SYNTAX IpAclNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the IP ACL table" INDEX { ipAclNewCfgIndx } ::= { ipAclNewCfgTable 1 } IpAclNewCfgEntry ::= SEQUENCE { ipAclNewCfgIndx Integer32, ipAclNewCfgIp IpAddress, ipAclNewCfgAction INTEGER, ipAclNewCfgMask IpAddress } ipAclNewCfgIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the IP ACL table." ::= { ipAclNewCfgEntry 1} ipAclNewCfgIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of the entry." ::= { ipAclNewCfgEntry 2} ipAclNewCfgAction OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipAclNewCfgEntry 3 } ipAclNewCfgMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address Mask of the entry." ::= { ipAclNewCfgEntry 4} -- UDP_BLAST: UDP Blast Protection udpBlastudpPortTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the UDP Blast Port table." ::= { udpBlastCfg 1 } udpBlastCurCfgudpPortPacketLimit OBJECT-TYPE SYNTAX INTEGER(1..20000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The default packet limit in the current configuration block." ::= { udpBlastCfg 2 } udpBlastCurCfgudpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF UdpBlastCurCfgudpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The UDP Blast port table in the current configuration block." ::= { udpBlastCfg 3 } udpBlastCurCfgudpPortEntry OBJECT-TYPE SYNTAX UdpBlastCurCfgudpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the UDP Blast UDP Port table" INDEX { udpBlastCurCfgudpPortLowIndx, udpBlastCurCfgudpPortHighIndx} ::= { udpBlastCurCfgudpPortTable 1 } UdpBlastCurCfgudpPortEntry ::= SEQUENCE { udpBlastCurCfgudpPortLowIndx INTEGER, udpBlastCurCfgudpPortHighIndx INTEGER, udpBlastCurCfgudpPortEntryPacketLimit INTEGER } udpBlastCurCfgudpPortLowIndx OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The low UDP port number of UDP port range in the UDP Port table." ::= { udpBlastCurCfgudpPortEntry 1} udpBlastCurCfgudpPortHighIndx OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The high UDP port number of UDP port range in the UDP Port table. If highIndx and lowIndx are set to the same, it is considered a single port instead of range" ::= { udpBlastCurCfgudpPortEntry 2} udpBlastCurCfgudpPortEntryPacketLimit OBJECT-TYPE SYNTAX INTEGER(1..20000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The Packet Limit of the UDP Port Entry." ::= { udpBlastCurCfgudpPortEntry 3} udpBlastNewCfgudpPortPacketLimit OBJECT-TYPE SYNTAX INTEGER(1..20000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The default packet limit in the new configuration block." ::= { udpBlastCfg 4 } udpBlastNewCfgudpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF UdpBlastNewCfgudpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The UDP Blast table in the new configuration block." ::= { udpBlastCfg 5 } udpBlastNewCfgudpPortEntry OBJECT-TYPE SYNTAX UdpBlastNewCfgudpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the UDP Blast UDP Port table" INDEX { udpBlastNewCfgudpPortLowIndx, udpBlastNewCfgudpPortHighIndx} ::= { udpBlastNewCfgudpPortTable 1 } UdpBlastNewCfgudpPortEntry ::= SEQUENCE { udpBlastNewCfgudpPortLowIndx INTEGER, udpBlastNewCfgudpPortHighIndx INTEGER, udpBlastNewCfgudpPortEntryDelete INTEGER, udpBlastNewCfgudpPortEntryPacketLimit INTEGER } udpBlastNewCfgudpPortLowIndx OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The low UDP port number of UDP port range in the UDP Port table. The difference between the minimum of all the low UDP port number specified and the maximum of all the high UDP port number specified can't exceed 5000." ::= { udpBlastNewCfgudpPortEntry 1} udpBlastNewCfgudpPortHighIndx OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The high UDP port number of UDP port range in the UDP Port table. The difference between the minimum of all the low UDP port number specified and the maximum of all the high UDP port number specified can't exceed 5000. If highIndx and lowIndx are set to the same, it is considered a single port instead of range." ::= { udpBlastNewCfgudpPortEntry 2} udpBlastNewCfgudpPortEntryDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This deletes the UDP port entry from lowIndx to highIndx." ::= { udpBlastNewCfgudpPortEntry 3} udpBlastNewCfgudpPortEntryPacketLimit OBJECT-TYPE SYNTAX INTEGER(1..20000000) MAX-ACCESS read-create STATUS current DESCRIPTION "The Packet Limit of the UDP Port Entry." ::= { udpBlastNewCfgudpPortEntry 4} -- General Security MIB objects secCurCfgSecurityLogThreshold OBJECT-TYPE SYNTAX INTEGER(0..1048576) MAX-ACCESS read-only STATUS current DESCRIPTION "The rate threshold for security logging in packets/sec. Rate zero indicates no rate threshold." ::= { secGeneralCfg 1 } secNewCfgSecurityLogThreshold OBJECT-TYPE SYNTAX INTEGER(0..1048576) MAX-ACCESS read-write STATUS current DESCRIPTION "The rate threshold for security logging in packets/sec. Rate zero indicates no rate threshold." ::= { secGeneralCfg 2 } secCurCfgPacketDepth OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Depth of match for pattern matching, in units of packets. A value of 0 means match all packets in the stream." ::= { secGeneralCfg 5 } secNewCfgPacketDepth OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Depth of match for pattern matching, in units of packets. A value of 0 means match all packets in the stream." ::= { secGeneralCfg 6 } secCurCfgIpAclSyslogThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Display syslog when threshold number of ACL's have been hit." ::= {secGeneralCfg 7 } secNewCfgIpAclSyslogThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Display syslog when threshold number of ACL's have been hit." ::= {secGeneralCfg 8 } secCurCfgIpAclSyslogTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Display syslog after specified number of minutes have passed." ::= { secGeneralCfg 9} secNewCfgIpAclSyslogTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Display syslog after specified number of minutes have passed." ::= { secGeneralCfg 10} -- DoS Attack Prevention MIB objects dosCurCfgIPTTL OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The smallest allowable IP ttl." ::= { dosAttackPrevCfg 1 } dosNewCfgIPTTL OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The smallest allowable IP ttl." ::= { dosAttackPrevCfg 2 } dosCurCfgIPProt OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The highest allowable IP protocol." ::= { dosAttackPrevCfg 3 } dosNewCfgIPProt OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The highest allowable IP protocol." ::= { dosAttackPrevCfg 4 } dosCurCfgFragdata OBJECT-TYPE SYNTAX INTEGER(16..248) MAX-ACCESS read-only STATUS current DESCRIPTION "The smallest allowable IP fragment payload." ::= { dosAttackPrevCfg 5 } dosNewCfgFragdata OBJECT-TYPE SYNTAX INTEGER(16..248) MAX-ACCESS read-write STATUS current DESCRIPTION "The smallest allowable IP fragment payload." ::= { dosAttackPrevCfg 6 } dosCurCfgFragoff OBJECT-TYPE SYNTAX INTEGER(16..248) MAX-ACCESS read-only STATUS current DESCRIPTION "The smallest allowable IP fragment offset." ::= { dosAttackPrevCfg 7 } dosNewCfgFragoff OBJECT-TYPE SYNTAX INTEGER(16..248) MAX-ACCESS read-write STATUS current DESCRIPTION "The smallest allowable IP fragment offset." ::= { dosAttackPrevCfg 8 } dosCurCfgSYNdata OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The largest allowable TCP SYN payload." ::= { dosAttackPrevCfg 9 } dosNewCfgSYNdata OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The largest allowable TCP SYN payload." ::= { dosAttackPrevCfg 10 } dosCurCfgICMPdata OBJECT-TYPE SYNTAX INTEGER(1..9026) MAX-ACCESS read-only STATUS current DESCRIPTION "The largest allowable ICMP payload." ::= { dosAttackPrevCfg 11 } dosNewCfgICMPdata OBJECT-TYPE SYNTAX INTEGER(1..9026) MAX-ACCESS read-write STATUS current DESCRIPTION "The largest allowable ICMP payload." ::= { dosAttackPrevCfg 12 } dosCurCfgICMPoff OBJECT-TYPE SYNTAX INTEGER(1..8190) MAX-ACCESS read-only STATUS current DESCRIPTION "The largest allowable ICMP fragment offset." ::= { dosAttackPrevCfg 13 } dosNewCfgICMPoff OBJECT-TYPE SYNTAX INTEGER(1..8190) MAX-ACCESS read-write STATUS current DESCRIPTION "The largest allowable ICMP fragment offset." ::= { dosAttackPrevCfg 14 } -- DST_IP_ACL: IP DST Address ACL Configuration ipDstAclTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the DST IP ACL table." ::= { ipDstAclCfg 1 } ipDstAclCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF IpDstAclCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of DST IP ACL in the current configuration block." ::= { ipDstAclCfg 2 } ipDstAclCurCfgEntry OBJECT-TYPE SYNTAX IpDstAclCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the DST IP ACL table" INDEX { ipDstAclCurCfgIndx } ::= { ipDstAclCurCfgTable 1 } IpDstAclCurCfgEntry ::= SEQUENCE { ipDstAclCurCfgIndx Integer32, ipDstAclCurCfgIp IpAddress, ipDstAclCurCfgMask IpAddress } ipDstAclCurCfgIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the DST IP ACL table." ::= { ipDstAclCurCfgEntry 1} ipDstAclCurCfgIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the entry." ::= { ipDstAclCurCfgEntry 2} ipDstAclCurCfgMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address Mask of the entry." ::= { ipDstAclCurCfgEntry 3} ipDstAclNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF IpDstAclNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of DST IP ACL in the new configuration block." ::= { ipDstAclCfg 3 } ipDstAclNewCfgEntry OBJECT-TYPE SYNTAX IpDstAclNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the DST IP ACL table" INDEX { ipDstAclNewCfgIndx } ::= { ipDstAclNewCfgTable 1 } IpDstAclNewCfgEntry ::= SEQUENCE { ipDstAclNewCfgIndx Integer32, ipDstAclNewCfgIp IpAddress, ipDstAclNewCfgAction INTEGER, ipDstAclNewCfgMask IpAddress } ipDstAclNewCfgIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the DST IP ACL table." ::= { ipDstAclNewCfgEntry 1} ipDstAclNewCfgIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of the entry." ::= { ipDstAclNewCfgEntry 2} ipDstAclNewCfgAction OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipDstAclNewCfgEntry 3 } ipDstAclNewCfgMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address Mask of the entry." ::= { ipDstAclNewCfgEntry 4} agBogonFileSeqNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "bogon file sequence number." ::= { bogonCfg 1 } -- -- Security Port statistics table -- agDosPortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AgDosPortStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of DOS port statistics." ::= { securityStats 1 } agDosPortStatsTableEntry OBJECT-TYPE SYNTAX AgDosPortStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the port stats table." INDEX { agDosPortStatsIndx } ::= { agDosPortStatsTable 1 } AgDosPortStatsTableEntry ::= SEQUENCE { agDosPortStatsIndx Integer32, agDosPortStatsIPLen Counter32, agDosPortStatsIPVersion Counter32, agDosPortStatsBroadcast Counter32, agDosPortStatsLoopback Counter32, agDosPortStatsLand Counter32, agDosPortStatsIPReserved Counter32, agDosPortStatsIPTTL Counter32, agDosPortStatsIPProt Counter32, agDosPortStatsIPOptLen Counter32, agDosPortStatsFragMoreDont Counter32, agDosPortStatsFragData Counter32, agDosPortStatsFragBoundary Counter32, agDosPortStatsFragLast Counter32, agDosPortStatsFragDontOff Counter32, agDosPortStatsFragOpt Counter32, agDosPortStatsFragOff Counter32, agDosPortStatsFragOversize Counter32, agDosPortStatsTCPLen Counter32, agDosPortStatsTCPPortZero Counter32, agDosPortStatsBlatAttack Counter32, agDosPortStatsTCPReserved Counter32, agDosPortStatsNullScanAttack Counter32, agDosPortStatsFullXmasScan Counter32, agDosPortStatsFinScan Counter32, agDosPortStatsVecnaScan Counter32, agDosPortStatsXmasScanAttack Counter32, agDosPortStatsSynFinScan Counter32, agDosPortStatsFlagAbnormal Counter32, agDosPortStatsSYNData Counter32, agDosPortStatsSYNFrag Counter32, agDosPortStatsFTPPort Counter32, agDosPortStatsDNSPort Counter32, agDosPortStatsSeqZero Counter32, agDosPortStatsAckZero Counter32, agDosPortStatsTCPOptLen Counter32, agDosPortStatsUDPLen Counter32, agDosPortStatsUDPPortZero Counter32, agDosPortStatsFraggleAttack Counter32, agDosPortStatsPepsi Counter32, agDosPortStatsRc8 Counter32, agDosPortStatsSNMPNull Counter32, agDosPortStatsICMPLen Counter32, agDosPortStatsSmurfAttack Counter32, agDosPortStatsICMPData Counter32, agDosPortStatsICMPOff Counter32, agDosPortStatsICMPType Counter32, agDosPortStatsIGMPLen Counter32, agDosPortStatsIGMPFrag Counter32, agDosPortStatsIGMPType Counter32, agDosPortStatsARPLen Counter32, agDosPortStatsARPNbCast Counter32, agDosPortStatsARPNuCast Counter32, agDosPortStatsARPSpoof Counter32, agDosPortStatsGARP Counter32, agDosPortStatsIP6Len Counter32, agDosPortStatsIP6Version Counter32 } agDosPortStatsIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port index." ::= { agDosPortStatsTableEntry 1 } agDosPortStatsIPLen OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 packets with bad IP header or payload length." ::= { agDosPortStatsTableEntry 10 } agDosPortStatsIPVersion OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 packets with IP version not 4." ::= { agDosPortStatsTableEntry 11 } agDosPortStatsBroadcast OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 packets with broadcast source or destination IP [0.0.0.0,255.255.255.255]." ::= { agDosPortStatsTableEntry 12 } agDosPortStatsLoopback OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 packets with loopback source or destination IP [127.0.0.0/8]." ::= { agDosPortStatsTableEntry 13 } agDosPortStatsLand OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 Packets with source IP equal to destination IP." ::= { agDosPortStatsTableEntry 14 } agDosPortStatsIPReserved OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 packets with IP reserved bit is set." ::= { agDosPortStatsTableEntry 15 } agDosPortStatsIPTTL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 packets with small IP TTL." ::= { agDosPortStatsTableEntry 16 } agDosPortStatsIPProt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 packets with IP protocol is unassigned or reserved." ::= { agDosPortStatsTableEntry 17 } agDosPortStatsIPOptLen OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 packets with bad IP options length." ::= { agDosPortStatsTableEntry 18 } agDosPortStatsFragMoreDont OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 packets with more fragments and don't fragment bits are set." ::= { agDosPortStatsTableEntry 19 } agDosPortStatsFragData OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 packets with more fragments bit is set and small payload." ::= { agDosPortStatsTableEntry 20 } agDosPortStatsFragBoundary OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 packets with more fragments bit is set and payload not at 8-byte boundary." ::= { agDosPortStatsTableEntry 21 } agDosPortStatsFragLast OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 packets last fragment without payload." ::= { agDosPortStatsTableEntry 22 } agDosPortStatsFragDontOff OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 packets with non-zero fragment offset and don't fragment bits are set." ::= { agDosPortStatsTableEntry 23 } agDosPortStatsFragOpt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 packets with non-zero fragment offset and IP options." ::= { agDosPortStatsTableEntry 24 } agDosPortStatsFragOff OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 packets with small non-zero fragment offset." ::= { agDosPortStatsTableEntry 25 } agDosPortStatsFragOversize OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 packets with non-zero fragment offset and oversize payload." ::= { agDosPortStatsTableEntry 26 } agDosPortStatsTCPLen OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP packets with bad TCP header length." ::= { agDosPortStatsTableEntry 27 } agDosPortStatsTCPPortZero OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP packets with source or destination port is zero." ::= { agDosPortStatsTableEntry 28 } agDosPortStatsBlatAttack OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP packets source IP not equal to destination IP and source port equal to destination port." ::= { agDosPortStatsTableEntry 29 } agDosPortStatsTCPReserved OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP packets with TCP reserved bit is set." ::= { agDosPortStatsTableEntry 30 } agDosPortStatsNullScanAttack OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP packets were the TCP sequence number is zero and all control bits are zeroes." ::= { agDosPortStatsTableEntry 31 } agDosPortStatsFullXmasScan OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP packets with all control bits are set." ::= { agDosPortStatsTableEntry 32 } agDosPortStatsFinScan OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP packets with only FIN bit is set." ::= { agDosPortStatsTableEntry 33 } agDosPortStatsVecnaScan OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP packets with only URG or PUSH or URG|FIN or PSH|FIN or URG|PSH bits are set." ::= { agDosPortStatsTableEntry 34 } agDosPortStatsXmasScanAttack OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP packets were the TCP sequence number is zero and FIN, URG and PSH bits are set." ::= { agDosPortStatsTableEntry 35 } agDosPortStatsSynFinScan OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP packets were SYN and FIN bits are set." ::= { agDosPortStatsTableEntry 36 } agDosPortStatsFlagAbnormal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP packets with abnormal control bits combination." ::= { agDosPortStatsTableEntry 37 } agDosPortStatsSYNData OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP packets with SYN bit is set and with payload." ::= { agDosPortStatsTableEntry 38 } agDosPortStatsSYNFrag OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP packets with SYN bit is set and more fragments bit is set." ::= { agDosPortStatsTableEntry 39 } agDosPortStatsFTPPort OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP packets with SPORT=20, DPORT<1024 and SYN bit is set." ::= { agDosPortStatsTableEntry 40 } agDosPortStatsDNSPort OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP packets with SPORT=53, DPORT<1024 and SYN bit is set." ::= { agDosPortStatsTableEntry 41 } agDosPortStatsSeqZero OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP packets with sequence number is zero." ::= { agDosPortStatsTableEntry 42 } agDosPortStatsAckZero OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP packets with acknowledgement number is zero and ACK bit is set." ::= { agDosPortStatsTableEntry 43 } agDosPortStatsTCPOptLen OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP packets with bad TCP options length." ::= { agDosPortStatsTableEntry 44 } agDosPortStatsUDPLen OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "UDP packets with bad UDP header length." ::= { agDosPortStatsTableEntry 45 } agDosPortStatsUDPPortZero OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "UDP packets with source or destination port is zero." ::= { agDosPortStatsTableEntry 46 } agDosPortStatsFraggleAttack OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "UDP packets sent to a broadcast destination IP (x.x.x.255)." ::= { agDosPortStatsTableEntry 47 } agDosPortStatsPepsi OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "UDP packets with SPORT=19, DPORT=7 or SPORT=7, DPORT=19." ::= { agDosPortStatsTableEntry 48 } agDosPortStatsRc8 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "UDP packets with SPORT=7 and DPORT=7." ::= { agDosPortStatsTableEntry 49 } agDosPortStatsSNMPNull OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "UDP packets with DPORT=161 and without payload." ::= { agDosPortStatsTableEntry 50 } agDosPortStatsICMPLen OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "ICMP packets with bad ICMP header length." ::= { agDosPortStatsTableEntry 51 } agDosPortStatsSmurfAttack OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "ICMP ping request to a broadcast destination IP x.x.x.255." ::= { agDosPortStatsTableEntry 52 } agDosPortStatsICMPData OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "ICMP packets with non-zero fragment offset and large payload." ::= { agDosPortStatsTableEntry 53 } agDosPortStatsICMPOff OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "ICMP packets with large fragment offset." ::= { agDosPortStatsTableEntry 54 } agDosPortStatsICMPType OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "ICMP packets with type is reserved." ::= { agDosPortStatsTableEntry 55 } agDosPortStatsIGMPLen OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IGMP packets with bad IGMP header length." ::= { agDosPortStatsTableEntry 56 } agDosPortStatsIGMPFrag OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IGMP packets with more fragments bit is set." ::= { agDosPortStatsTableEntry 57 } agDosPortStatsIGMPType OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IGMP packets with type is reserved." ::= { agDosPortStatsTableEntry 58 } agDosPortStatsARPLen OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "ARP request or reply packets with bad length." ::= { agDosPortStatsTableEntry 59 } agDosPortStatsARPNbCast OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "ARP request packets with non broadcast destination MAC." ::= { agDosPortStatsTableEntry 60 } agDosPortStatsARPNuCast OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "ARP reply packets with non unicast destination MAC." ::= { agDosPortStatsTableEntry 61 } agDosPortStatsARPSpoof OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "ARP request or reply packets with mismatch source with sender MACs or destination with target MACs." ::= { agDosPortStatsTableEntry 62 } agDosPortStatsGARP OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "ARP request or reply packets with same source and destination IP." ::= { agDosPortStatsTableEntry 63 } agDosPortStatsIP6Len OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPv6 packets with bad header length." ::= { agDosPortStatsTableEntry 64 } agDosPortStatsIP6Version OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "IPv6 packets with IP version not 6." ::= { agDosPortStatsTableEntry 65 } agSecurityPgrpStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AgSecurityPgrpStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of pattern group statistics." ::= { securityStats 2 } agSecurityPgrpStatsTableEntry OBJECT-TYPE SYNTAX AgSecurityPgrpStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the port stats table." INDEX { agSecurityPgrpStatsIndx } ::= { agSecurityPgrpStatsTable 1 } AgSecurityPgrpStatsTableEntry ::= SEQUENCE { agSecurityPgrpStatsIndx Integer32, agSecurityPgrpStatsName DisplayString, agSecurityPgrpStatsHits Counter32 } agSecurityPgrpStatsIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Pattern Group index." ::= { agSecurityPgrpStatsTableEntry 1 } agSecurityPgrpStatsName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the Pattern Group." ::= { agSecurityPgrpStatsTableEntry 2 } agSecurityPgrpStatsHits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total hits for this Pattern Group." ::= { agSecurityPgrpStatsTableEntry 3 } -- UDP_BLAST statistics agSecurityUbStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AgSecurityUbStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of UDP Blast statistics." ::= { securityStats 3 } agSecurityUbStatsTableEntry OBJECT-TYPE SYNTAX AgSecurityUbStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the UDP Blast stats table." INDEX { agSecurityUbStatsIndx } ::= { agSecurityUbStatsTable 1 } AgSecurityUbStatsTableEntry ::= SEQUENCE { agSecurityUbStatsIndx Integer32, agSecurityUbStatsPort Integer32, agSecurityUbStatsBlockedPacket Counter32, agSecurityUbStatsPacketRate Counter32 } agSecurityUbStatsIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP Blast Statistics Group index." ::= { agSecurityUbStatsTableEntry 1 } agSecurityUbStatsPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "UDP Port Number." ::= { agSecurityUbStatsTableEntry 2 } agSecurityUbStatsBlockedPacket OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total blocked packet." ::= { agSecurityUbStatsTableEntry 3 } agSecurityUbStatsPacketRate OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Packet rate per second." ::= { agSecurityUbStatsTableEntry 4 } -- IP_ACL statistics agSecurityIpAclStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AgSecurityIpAclStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP ACL statistics." ::= { securityStats 4 } agSecurityIpAclStatsTableEntry OBJECT-TYPE SYNTAX AgSecurityIpAclStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the IP ACL stats table." INDEX { agSecurityIpAclStatsIndx } ::= { agSecurityIpAclStatsTable 1 } AgSecurityIpAclStatsTableEntry ::= SEQUENCE { agSecurityIpAclStatsIndx Integer32, agSecurityIpAclStatsAddress IpAddress, agSecurityIpAclStatsBlockedPacket Counter32 } agSecurityIpAclStatsIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IP ACL Statistics Group index." ::= { agSecurityIpAclStatsTableEntry 1 } agSecurityIpAclStatsAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP ACL IP Address." ::= { agSecurityIpAclStatsTableEntry 2 } agSecurityIpAclStatsBlockedPacket OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total blocked packet." ::= { agSecurityIpAclStatsTableEntry 3 } -- DST_IP_ACL statistics agSecurityIpDstAclStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AgSecurityIpDstAclStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of DST IP ACL statistics." ::= { securityStats 5 } agSecurityIpDstAclStatsTableEntry OBJECT-TYPE SYNTAX AgSecurityIpDstAclStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the DST IP ACL stats table." INDEX { agSecurityIpDstAclStatsIndx } ::= { agSecurityIpDstAclStatsTable 1 } AgSecurityIpDstAclStatsTableEntry ::= SEQUENCE { agSecurityIpDstAclStatsIndx Integer32, agSecurityIpDstAclStatsAddress IpAddress, agSecurityIpDstAclStatsBlockedPacket Counter32 } agSecurityIpDstAclStatsIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The DST IP ACL Statistics Group index." ::= { agSecurityIpDstAclStatsTableEntry 1 } agSecurityIpDstAclStatsAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "DST IP ACL IP Address." ::= { agSecurityIpDstAclStatsTableEntry 2 } agSecurityIpDstAclStatsBlockedPacket OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total blocked packet." ::= { agSecurityIpDstAclStatsTableEntry 3 } -- Port access agPortAccessTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in Port Access Table." ::= { agPortAccessCfg 1 } agCurCfgPortAccessTable OBJECT-TYPE SYNTAX SEQUENCE OF AgCurCfgPortAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of ports and their access states" ::= { agPortAccessCfg 2 } agCurCfgPortAccessEntry OBJECT-TYPE SYNTAX AgCurCfgPortAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the port access table" INDEX { agCurCfgPortAccessIndex } ::= { agCurCfgPortAccessTable 1 } AgCurCfgPortAccessEntry ::= SEQUENCE { agCurCfgPortAccessIndex Integer32, agCurCfgPortAccessState INTEGER } agCurCfgPortAccessIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port number in the table." ::= { agCurCfgPortAccessEntry 1 } agCurCfgPortAccessState OBJECT-TYPE SYNTAX INTEGER { deny(0), allow(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The port access state of the port. deny(0) - port does not have management access allow(1) - port has management access" ::= { agCurCfgPortAccessEntry 2 } agNewCfgPortAccessTable OBJECT-TYPE SYNTAX SEQUENCE OF AgNewCfgPortAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of ports and their access states" ::= { agPortAccessCfg 3 } agNewCfgPortAccessEntry OBJECT-TYPE SYNTAX AgNewCfgPortAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the port access table." INDEX { agNewCfgPortAccessIndex } ::= { agNewCfgPortAccessTable 1 } AgNewCfgPortAccessEntry ::= SEQUENCE { agNewCfgPortAccessIndex Integer32, agNewCfgPortAccessState INTEGER } agNewCfgPortAccessIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port number in the table." ::= { agNewCfgPortAccessEntry 1 } agNewCfgPortAccessState OBJECT-TYPE SYNTAX INTEGER { deny(0), allow(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The port access state of the port. deny(0) - port does not have management access allow(1) - port has management access" ::= { agNewCfgPortAccessEntry 2 } -- VLAN access agVLANAccessTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in VLAN Access Table." ::= { agVLANAccessCfg 1 } agCurCfgVLANAccessTable OBJECT-TYPE SYNTAX SEQUENCE OF AgCurCfgVLANAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VLAN's and their access states" ::= { agVLANAccessCfg 2 } agCurCfgVLANAccessEntry OBJECT-TYPE SYNTAX AgCurCfgVLANAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the VLAN access table" INDEX { agCurCfgVLANAccessIndex } ::= { agCurCfgVLANAccessTable 1 } AgCurCfgVLANAccessEntry ::= SEQUENCE { agCurCfgVLANAccessIndex Integer32, agCurCfgVLANAccessState INTEGER } agCurCfgVLANAccessIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN number in the table." ::= { agCurCfgVLANAccessEntry 1 } agCurCfgVLANAccessState OBJECT-TYPE SYNTAX INTEGER { deny(0), allow(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN access state of the port. deny(0) - VLAN does not have management access allow(1) - VLAN has management access" ::= { agCurCfgVLANAccessEntry 2 } agNewCfgVLANAccessTable OBJECT-TYPE SYNTAX SEQUENCE OF AgNewCfgVLANAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VLAN's and their access states" ::= { agVLANAccessCfg 3 } agNewCfgVLANAccessEntry OBJECT-TYPE SYNTAX AgNewCfgVLANAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the VLAN access table." INDEX { agNewCfgVLANAccessIndex } ::= { agNewCfgVLANAccessTable 1 } AgNewCfgVLANAccessEntry ::= SEQUENCE { agNewCfgVLANAccessIndex Integer32, agNewCfgVLANAccessState INTEGER } agNewCfgVLANAccessIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN number in the table." ::= { agNewCfgVLANAccessEntry 1 } agNewCfgVLANAccessState OBJECT-TYPE SYNTAX INTEGER { deny(0), allow(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN access state of the port. deny(0) - VLAN does not have management access allow(1) - VLAN has management access" ::= { agNewCfgVLANAccessEntry 2 } -- SAVE Configuration agSaveConfig OBJECT-TYPE SYNTAX INTEGER { save(1), idle(2), inprogress(3), complete(4), failed(5), saveNoBackup(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is read the current state is returned. idle(2) indicates that there is no save in progess. complete(4) indicates that the last save operation is completed. Setting the value to save(1), will write the current config block since the last save to the flash memory with backup, for saving without backup saveNoBackup(6) can be used. If the save is successful this variable will return the state 'complete' else it will return 'failed'. In case of failure, to read the reason for failure use the agSaveTable. Once the operation is completed or the agSaveTable is read , the save buffer needs to be freed and the agSaveState should be set back to 'idle' state so others can issue the save command via SNMP." ::= { agSave 1 } agSaveTableSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of strings in the save table." ::= { agSave 2 } agSaveTable OBJECT-TYPE SYNTAX SEQUENCE OF AgSaveTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of error messages for asynchrnous save operation." ::= { agSave 3 } agSaveTableEntry OBJECT-TYPE SYNTAX AgSaveTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Error Strings generated while asynchronous save operation." INDEX { agSaveIndex } ::= { agSaveTable 1 } AgSaveTableEntry ::= SEQUENCE { agSaveIndex Integer32, agSaveString OCTET STRING } agSaveIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The table index for save." ::= { agSaveTableEntry 1 } agSaveString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "A string in the Save table." ::= { agSaveTableEntry 2 } -- SNMP File Transfer agFileSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This is the number of octets in the file. This is set to indicate the total size of the file that is being transfered. The value is set in bytes. File size range for Bogon File Transfer 1 - 2097152 and for Symantec Signature 1 - 178176" ::= { agFileTransfer 1 } agFileTransferState OBJECT-TYPE SYNTAX INTEGER { idle(1), transfer(2), inprogress(3), missingrows(4), complete(5), error(6), endoftransfer(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is read the current state is returned. idle(1) indicates that there is no transfer in progess. Any user must verify the state machine is in state idle before setting the state to transfer(2).Before setting transfer(2) state agFileSize and agFileType should be set and then transition changes to inprogress(3). While in this state, the agFileTable should be populated with all the rows needed to transfer the files entire contents. endoftransfer(7) should be set inorder to notify the agent that contents are transfered. If all the contents are received, then the state transitions to complete(5). If there are any missing rows, the agent will transition to the state missingrows(4). The user must either populate the missing rows, and give a endoftransfer(7) state, or give up the transfer by setting the state to idle(1). When the idle(1) state is set, the string with missing rows is cleared and the buffer is written to the file, state goes complete(5) to upon successful completion. Any transition to idle(1) will free any resources associated with the file transfer, that are no longer needed. The agFileTable will contain 0 rows. While in state missingrows(4), agFileTableMissingRows will contain a parseable string of missing row indexes seperated by a comma." ::= { agFileTransfer 2 } agFileTableMissingRows OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "A string representing the missing rows of data for the file transfer. This is only valid while agFileTransferState is in the missingrows(4) state. The string will be numbers representing the missing row indexes seperated by commas e.g. 13,25,99" ::= { agFileTransfer 3 } agFileType OBJECT-TYPE SYNTAX INTEGER { bogon(1), symantecSignature(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This identifies the file type that is being transfered." ::= { agFileTransfer 4 } agFileTableSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of rows in the file table." ::= { agFileTransfer 5 } agFileTable OBJECT-TYPE SYNTAX SEQUENCE OF AgFileTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of octets that when combined create a file." ::= { agFileTransfer 6 } agFileTableEntry OBJECT-TYPE SYNTAX AgFileTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the file table." INDEX { agFileIndex } ::= { agFileTable 1 } AgFileTableEntry ::= SEQUENCE { agFileIndex Integer32, agFileString OCTET STRING } agFileIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The table index." ::= { agFileTableEntry 1 } agFileString OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1024)) MAX-ACCESS read-write STATUS current DESCRIPTION "A string with bogon ip/mask pair." ::= { agFileTableEntry 2 } -- End of SNMP FT agFileErrorTableSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of strings in the snmp file transfer error table." ::= { agFileTransfer 7 } agFileErrorTable OBJECT-TYPE SYNTAX SEQUENCE OF AgFileErrorTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of error messages for asynchrnous snmp file transfer operation." ::= { agFileTransfer 8 } agFileErrorTableEntry OBJECT-TYPE SYNTAX AgFileErrorTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Error Strings generated while asynchronous snmp file transfer operation." INDEX { agFileErrorIndex } ::= { agFileErrorTable 1 } AgFileErrorTableEntry ::= SEQUENCE { agFileErrorIndex Integer32, agFileErrorString DisplayString } agFileErrorIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The table index for snmp file transfer error table." ::= { agFileErrorTableEntry 1 } agFileErrorString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A string in the snmp file transfer error table." ::= { agFileErrorTableEntry 2 } agAccessUser OBJECT IDENTIFIER ::= { agAccess 1 } agAccessUid OBJECT IDENTIFIER ::= { agAccessUser 1 } agAccessUserCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgAccessUserCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Access user configuration." ::= { agAccessUid 1 } agAccessUserCurCfgTableEntry OBJECT-TYPE SYNTAX AgAccessUserCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the Access user configuration table." INDEX { agAccessUserCurCfgUId } ::= { agAccessUserCurCfgTable 1 } AgAccessUserCurCfgTableEntry ::= SEQUENCE { agAccessUserCurCfgUId Integer32, agAccessUserCurCos INTEGER, agAccessUserCurCfgName DisplayString, agAccessUserCurCfgAdminPswd DisplayString, agAccessUserCurCfgPswd DisplayString, agAccessUserCurCfgConfPswd DisplayString, agAccessUserCurCfgBackDoor INTEGER, agAccessUserCurCfgCrtMng INTEGER, agAccessUserCurCfgReal DisplayString, agAccessUserCurCfgState INTEGER, agAccessUserCurCfgBmap OCTET STRING } agAccessUserCurCfgUId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The User identifier." ::= { agAccessUserCurCfgTableEntry 1 } agAccessUserCurCos OBJECT-TYPE SYNTAX INTEGER { user(0), crtadmin(1), slboper(2), l4oper(3), oper(4), slbadmin(5), l4admin(6), admin(7), slbview(8), l3oper(9), l3admin(10), l1oper(11), l2oper(12) } MAX-ACCESS read-only STATUS current DESCRIPTION "The user class of service.The COS applicable for users in a) Admin Context - user(0),l1oper(11),l2oper(12),oper(4) & admin(7) b) vADC - All except l1oper(11) & l2oper(12) c) Standalone ADC - All except l3oper(9),l3admin(10),l1oper(11) & l2oper(12)." ::= { agAccessUserCurCfgTableEntry 2 } agAccessUserCurCfgName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The user name." ::= { agAccessUserCurCfgTableEntry 3 } agAccessUserCurCfgAdminPswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The character string representing the admin password." ::= { agAccessUserCurCfgTableEntry 4 } agAccessUserCurCfgPswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The character string representing the user password." ::= { agAccessUserCurCfgTableEntry 5 } agAccessUserCurCfgConfPswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The character string is used to confirm the user password." ::= { agAccessUserCurCfgTableEntry 6 } agAccessUserCurCfgBackDoor OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable User backdoor Access." ::= { agAccessUserCurCfgTableEntry 7 } agAccessUserCurCfgCrtMng OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable certificate management permissions." ::= { agAccessUserCurCfgTableEntry 8 } agAccessUserCurCfgReal OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The user real servers." ::= { agAccessUserCurCfgTableEntry 9 } agAccessUserCurCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable a user." ::= { agAccessUserCurCfgTableEntry 10 } agAccessUserCurCfgBmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The real servers added to this user. The selected real servers are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Real Server 9 || || || ||___ Real Server 8 || |____ Real Server 7 || . . . ||_________ Real Server 2 |__________ Real Server 1 where x : 1 - The represented Real Server is added 0 - The represented Real Server is not added" ::= { agAccessUserCurCfgTableEntry 11 } agAccessUserNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF AgAccessUserNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Access user configuration." ::= { agAccessUid 2 } agAccessUserNewCfgTableEntry OBJECT-TYPE SYNTAX AgAccessUserNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the Access user configuration table." INDEX { agAccessUserNewCfgUId } ::= { agAccessUserNewCfgTable 1 } AgAccessUserNewCfgTableEntry ::= SEQUENCE { agAccessUserNewCfgUId Integer32, agAccessUserNewCos INTEGER, agAccessUserNewCfgName DisplayString, agAccessUserNewCfgAdminPswd DisplayString, agAccessUserNewCfgPswd DisplayString, agAccessUserNewCfgConfPswd DisplayString, agAccessUserNewCfgBackDoor INTEGER, agAccessUserNewCfgCrtMng INTEGER, agAccessUserNewCfgRealAdd Integer32, agAccessUserNewCfgRealRem Integer32, agAccessUserNewCfgState INTEGER, agAccessUserNewCfgDelete INTEGER, agAccessUserNewCfgBmap OCTET STRING } agAccessUserNewCfgUId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The User identifier." ::= { agAccessUserNewCfgTableEntry 1 } agAccessUserNewCos OBJECT-TYPE SYNTAX INTEGER { user(0), crtadmin(1), slboper(2), l4oper(3), oper(4), slbadmin(5), l4admin(6), admin(7), slbview(8), l3oper(9), l3admin(10), l1oper(11), l2oper(12) } MAX-ACCESS read-create STATUS current DESCRIPTION "The user class of service.The COS applicable for users in a) Admin Context - user(0),l1oper(11),l2oper(12),oper(4) & admin(7) b) vADC - All except l1oper(11) & l2oper(12) c) Standalone ADC - All except l3oper(9),l3admin(10),l1oper(11) & l2oper(12)." ::= { agAccessUserNewCfgTableEntry 2 } agAccessUserNewCfgName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "The user name." ::= { agAccessUserNewCfgTableEntry 3 } agAccessUserNewCfgAdminPswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "The character string representing the admin password." ::= { agAccessUserNewCfgTableEntry 4 } agAccessUserNewCfgPswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "The character string representing the user passworde." ::= { agAccessUserNewCfgTableEntry 5 } agAccessUserNewCfgConfPswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "This character string is used to confirm the user password." ::= { agAccessUserNewCfgTableEntry 6 } agAccessUserNewCfgBackDoor OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable User backdoor access." ::= { agAccessUserNewCfgTableEntry 7 } agAccessUserNewCfgCrtMng OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable a certificate management permissions." ::= { agAccessUserNewCfgTableEntry 8 } agAccessUserNewCfgRealAdd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Add user real server." ::= { agAccessUserNewCfgTableEntry 9 } agAccessUserNewCfgRealRem OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Remove user real server." ::= { agAccessUserNewCfgTableEntry 10 } agAccessUserNewCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable a user." ::= { agAccessUserNewCfgTableEntry 11 } agAccessUserNewCfgDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User" ::= { agAccessUserNewCfgTableEntry 12 } agAccessUserNewCfgBmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The real servers added to this user. The selected real servers are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Real Server 9 || || || ||___ Real Server 8 || |____ Real Server 7 || . . . ||_________ Real Server 2 |__________ Real Server 1 where x : 1 - The represented Real Server is added 0 - The represented Real Server is not added" ::= { agAccessUserNewCfgTableEntry 13 } agAccessUsrPasswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The character string representing the user password." ::= { agAccessUser 2 } agAccessSlbOperPasswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The character string representing the SLB operator(slboper) password." ::= { agAccessUser 3 } agAccessL4OperPasswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The character string representing the L4 operator(l4oper) password." ::= { agAccessUser 4 } agAccessOperPasswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The character string representing the Operator(oper) password." ::= { agAccessUser 5 } agAccessSlbAdminPasswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The character string representing the Slb Admin (slbadmin) password." ::= { agAccessUser 6 } agAccessL4AdminPasswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The character string representing the L4 Admin(l4admin) password." ::= { agAccessUser 7 } agAccessAdminPasswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The character string representing the current Administrator(admin) password." ::= { agAccessUser 8 } agAccessAdminNewPasswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The character string representing the Administrator(admin) New password." ::= { agAccessUser 9 } agAccessAdminConfNewPasswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The character string is used to confirm the Administrator(admin) New password." ::= { agAccessUser 11 } agAccessSlbViewerPasswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The character string representing the Slb Viewer password (slbviewer)." ::= { agAccessUser 12 } agAccessTelnet OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Telnet server access." ::= { agAccess 2 } agAccessHttp OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable HTTP (Web) server access." ::= { agAccess 3 } agAccessHttps OBJECT IDENTIFIER ::= { agAccess 4 } agAccessCurCfgHttpsState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable HTTPS server access." ::= { agAccessHttps 1 } agAccessNewCfgHttpsState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable HTTPS server access." ::= { agAccessHttps 2 } agAccessCurCfgHttpsPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Enter HTTPS server port number." ::= { agAccessHttps 3 } agAccessNewCfgHttpsPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Enter HTTPS server port number." ::= { agAccessHttps 4 } agAccessCurCfgHttpsCert OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Association of HTTPS server certificate from certificate repository." ::= { agAccessHttps 5 } agAccessNewCfgHttpsCert OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Association of HTTPS server certificate from certificate repository." ::= { agAccessHttps 6 } agAccessHttpsCfgCertsTable OBJECT-TYPE SYNTAX SEQUENCE OF AgAccessHttpsCfgCertsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." ::= { agAccessHttps 7 } agAccessHttpsCfgCertsEntry OBJECT-TYPE SYNTAX AgAccessHttpsCfgCertsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." INDEX { agAccessHttpsCfgCertsID } ::= { agAccessHttpsCfgCertsTable 1 } AgAccessHttpsCfgCertsEntry ::= SEQUENCE { agAccessHttpsCfgCertsID INTEGER, agAccessHttpsCfgCertsName DisplayString, agAccessHttpsCfgCertsKeySize INTEGER, agAccessHttpsCfgCertsExpiry DisplayString, agAccessHttpsCfgCertsCommonName DisplayString, agAccessHttpsCfgCertsHashAlgo INTEGER, agAccessHttpsCfgCertsCountryName DisplayString, agAccessHttpsCfgCertsProvinceName DisplayString, agAccessHttpsCfgCertsLocalityName DisplayString, agAccessHttpsCfgCertsOrganizationName DisplayString, agAccessHttpsCfgCertsOrganizationUnitName DisplayString, agAccessHttpsCfgCertsEMail DisplayString, agAccessHttpsCfgCertsValidityPeriod INTEGER, agAccessHttpsCfgCertsDelete INTEGER, agAccessHttpsCfgCertsGenerate INTEGER, agAccessHttpsCfgCertsStatus INTEGER } agAccessHttpsCfgCertsID OBJECT-TYPE SYNTAX INTEGER (1) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { agAccessHttpsCfgCertsEntry 1 } agAccessHttpsCfgCertsName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Certificate name" ::= { agAccessHttpsCfgCertsEntry 3 } agAccessHttpsCfgCertsKeySize OBJECT-TYPE SYNTAX INTEGER { ks512(1), ks1024(2), ks2048(3), ks4096(4), unknown(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Key size for the generated certificate" ::= { agAccessHttpsCfgCertsEntry 4 } agAccessHttpsCfgCertsExpiry OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate expiry date" ::= { agAccessHttpsCfgCertsEntry 5 } agAccessHttpsCfgCertsCommonName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..85)) MAX-ACCESS read-create STATUS current DESCRIPTION "Your website address should be provided here" ::= { agAccessHttpsCfgCertsEntry 6 } agAccessHttpsCfgCertsHashAlgo OBJECT-TYPE SYNTAX INTEGER { md5(1), sha1(2), sha256(3), sha384(4), sha512(5), unknown(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Hash algorithm for cert generation" ::= { agAccessHttpsCfgCertsEntry 7 } agAccessHttpsCfgCertsCountryName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..85)) MAX-ACCESS read-create STATUS current DESCRIPTION "Certificate details" ::= { agAccessHttpsCfgCertsEntry 8 } agAccessHttpsCfgCertsProvinceName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..149)) MAX-ACCESS read-create STATUS current DESCRIPTION "Certificate details" ::= { agAccessHttpsCfgCertsEntry 9 } agAccessHttpsCfgCertsLocalityName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..149)) MAX-ACCESS read-create STATUS current DESCRIPTION "Certificate details" ::= { agAccessHttpsCfgCertsEntry 10 } agAccessHttpsCfgCertsOrganizationName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..85)) MAX-ACCESS read-create STATUS current DESCRIPTION "Certificate details" ::= { agAccessHttpsCfgCertsEntry 11 } agAccessHttpsCfgCertsOrganizationUnitName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..85)) MAX-ACCESS read-create STATUS current DESCRIPTION "Certificate details" ::= { agAccessHttpsCfgCertsEntry 12 } agAccessHttpsCfgCertsEMail OBJECT-TYPE SYNTAX DisplayString (SIZE(0..149)) MAX-ACCESS read-create STATUS current DESCRIPTION "Certificate details" ::= { agAccessHttpsCfgCertsEntry 13 } agAccessHttpsCfgCertsValidityPeriod OBJECT-TYPE SYNTAX INTEGER (1..3650) MAX-ACCESS read-create STATUS current DESCRIPTION "Period for which this certificate is valid" ::= { agAccessHttpsCfgCertsEntry 14 } agAccessHttpsCfgCertsDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Delete certificate." ::= { agAccessHttpsCfgCertsEntry 15 } agAccessHttpsCfgCertsGenerate OBJECT-TYPE SYNTAX INTEGER { other(1), generate(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "By setting the value to generate(2), the Certicicate will be generated." ::= { agAccessHttpsCfgCertsEntry 16 } agAccessHttpsCfgCertsStatus OBJECT-TYPE SYNTAX INTEGER { generated(1), notGenerated(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows if the current certificate is generated." ::= { agAccessHttpsCfgCertsEntry 17 } agAccessSnmp OBJECT IDENTIFIER ::= { agAccess 5 } agAccessSsh OBJECT IDENTIFIER ::= { agAccess 6 } agAccessXml OBJECT IDENTIFIER ::= { agAccess 7 } agAccessSnmpV3 OBJECT IDENTIFIER ::= { agAccess 8 } agAccessCurCfgSnmpAccess OBJECT-TYPE SYNTAX INTEGER { read-only(1), read-write(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Set SNMP access control." ::= { agAccessSnmp 1 } agAccessNewCfgSnmpAccess OBJECT-TYPE SYNTAX INTEGER { read-only(1), read-write(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set SNMP access control." ::= { agAccessSnmp 2 } agAccessCurCfgSnmpReadComm OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "SNMP Read community string." ::= { agAccessSnmp 3 } agAccessNewCfgSnmpReadComm OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Read community string." ::= { agAccessSnmp 4 } agAccessCurCfgSnmpWriteComm OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "SNMP Write community string." ::= { agAccessSnmp 5 } agAccessNewCfgSnmpWriteComm OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Write community string." ::= { agAccessSnmp 6 } agAccessCurCfgSnmpTrap1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "First Snmp Trap Host IP Address." ::= { agAccessSnmp 7 } agAccessNewCfgSnmpTrap1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "First Snmp Trap Host IP Address." ::= { agAccessSnmp 8 } agAccessCurCfgSnmpTrap2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Second Snmp Trap Host IP Address." ::= { agAccessSnmp 9 } agAccessNewCfgSnmpTrap2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Second Snmp Trap Host IP Address." ::= { agAccessSnmp 10 } agAccessCurCfgSnmpTrap1Ipv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address of the first Snmp Trap Host. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agAccessSnmp 11 } agAccessNewCfgSnmpTrap1Ipv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv6 address of the first Snmp Trap Host. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agAccessSnmp 12 } agAccessCurCfgSnmpTrap2Ipv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address of the first Snmp Trap Host. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agAccessSnmp 13 } agAccessNewCfgSnmpTrap2Ipv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv6 address of the first Snmp Trap Host. Address should be 16-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { agAccessSnmp 14 } agAccessCurCfgSshPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ssh server port number." ::= { agAccessSsh 1 } agAccessNewCfgSshPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Ssh server port number." ::= { agAccessSsh 2 } agAccessCurCfgSshV1 OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable SSH V1 Support." ::= { agAccessSsh 3 } agAccessNewCfgSshV1 OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable SSH V1 Support." ::= { agAccessSsh 4 } agAccessCurCfgSshScp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable SCP apply and save." ::= { agAccessSsh 5 } agAccessNewCfgSshScp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable SCP apply and save." ::= { agAccessSsh 6 } agAccessCurCfgSshState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable SSH Server." ::= { agAccessSsh 7 } agAccessNewCfgSshState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable SSH Server." ::= { agAccessSsh 8 } agCurCfgXMLCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable XML config access." ::= { agAccessXml 1 } agNewCfgXMLCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable XML config access." ::= { agAccessXml 2 } agCfgXMLCertExpire OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate expire." ::= { agAccessXml 3 } agCfgXMLCertSubjectCountry OBJECT-TYPE SYNTAX DisplayString (SIZE(0..85)) MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate subject country." ::= { agAccessXml 4 } agCfgXMLCertSubjectState OBJECT-TYPE SYNTAX DisplayString (SIZE(0..149)) MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate subject state." ::= { agAccessXml 5 } agCfgXMLCertSubjectLocality OBJECT-TYPE SYNTAX DisplayString (SIZE(0..149)) MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate subject locality." ::= { agAccessXml 6 } agCfgXMLCertSubjectOrg OBJECT-TYPE SYNTAX DisplayString (SIZE(0..85)) MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate subject organization." ::= { agAccessXml 7 } agCfgXMLCertSubjectOrgUnit OBJECT-TYPE SYNTAX DisplayString (SIZE(0..85)) MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate subject organization unit." ::= { agAccessXml 8 } agCfgXMLCertSubjectCommonName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..85)) MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate subject common name." ::= { agAccessXml 9 } agCfgXMLCertSubjectEmail OBJECT-TYPE SYNTAX DisplayString (SIZE(0..149)) MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate subject email." ::= { agAccessXml 10 } agCfgXMLCertSignatureAlg OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "Signature algorithm." ::= { agAccessXml 11 } agCfgXMLClientCertName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate Name." ::= { agAccessXml 12 } agCfgXMLClientCertDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Delete certificate." ::= { agAccessXml 13 } targetAddrCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF TargetAddrCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of target addresses configured." ::= { agAccessSnmpV3 1 } targetAddrCurCfgEntry OBJECT-TYPE SYNTAX TargetAddrCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the target address table." INDEX { targetAddrCurCfgIndex } ::= { targetAddrCurCfgTable 1 } TargetAddrCurCfgEntry ::= SEQUENCE { targetAddrCurCfgIndex Integer32, targetAddrCurCfgName DisplayString, targetAddrCurCfgTransIp IpAddress, targetAddrCurCfgTransPort INTEGER, targetAddrCurCfgTagList DisplayString, targetAddrCurCfgParamsName DisplayString, targetAddrCurCfgTransIpv6 DisplayString, targetAddrCurCfgIpVer INTEGER, targetAddrCurCfgTrapBmap OCTET STRING } targetAddrCurCfgIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Target Address table Identifier." ::= { targetAddrCurCfgEntry 1 } targetAddrCurCfgName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "A human readable string representing the name of the target address." ::= { targetAddrCurCfgEntry 2 } targetAddrCurCfgTransIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Target transport address IP." ::= { targetAddrCurCfgEntry 3 } targetAddrCurCfgTransPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Target transport address port." ::= { targetAddrCurCfgEntry 4 } targetAddrCurCfgTagList OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Tag List." ::= { targetAddrCurCfgEntry 5 } targetAddrCurCfgParamsName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The target parameter name." ::= { targetAddrCurCfgEntry 6 } targetAddrCurCfgTransIpv6 OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 40 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "Target transport Ipv6 address.Address should be 16-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx." ::= { targetAddrCurCfgEntry 7 } targetAddrCurCfgIpVer OBJECT-TYPE SYNTAX INTEGER { ipv4 ( 1 ) , ipv6 ( 2 ) } MAX-ACCESS read-only STATUS current DESCRIPTION "Version of the targer Ip Address." ::= { targetAddrCurCfgEntry 8 } targetAddrCurCfgTrapBmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable traps for selected features. Traps for selected features in bitmap format. in receiving order: OCTET 1 OCTET 2 OCTET 3 OCTET4 xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx |||| ||||_ gslb |||| ||||__ Ip |||| ||||___ Security |||| ||||___ not used |||| |||__ slb |||| |||___ Port-Mirror |||| |||____ slb_atk |||| |||____ not used |||| ||___ vlan |||| |||___ Isd |||| ||_____ http-err |||| ||_____ not used |||| |____ stp |||| |_____ ntp |||| |______ ospf |||| |______ appsvc ||||______ cli ||||_______ bgp ||||________ ratelim ||||________ Ip6 |||_______ mgmt |||________ vrrp |||_________ Synk-atk |||_________ log-UFDFO ||________ System ||_________ ssh ||__________ web ||__________ not used |_________ Console |__________ filter |___________ Dps |___________ rmon where x : 1 - Trap is Enabled 0 - Trap is Disabled." ::= { targetAddrCurCfgEntry 9 } targetAddrNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF TargetAddrNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of target addresses configured." ::= { agAccessSnmpV3 2 } targetAddrNewCfgEntry OBJECT-TYPE SYNTAX TargetAddrNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the target address table." INDEX { targetAddrNewCfgIndex } ::= { targetAddrNewCfgTable 1 } TargetAddrNewCfgEntry ::= SEQUENCE { targetAddrNewCfgIndex Integer32, targetAddrNewCfgName DisplayString, targetAddrNewCfgTransIp IpAddress, targetAddrNewCfgTransPort INTEGER, targetAddrNewCfgTagList DisplayString, targetAddrNewCfgParamsName DisplayString, targetAddrNewCfgEnaTrap INTEGER, targetAddrNewCfgDisTrap INTEGER, targetAddrNewCfgDelete INTEGER, targetAddrNewCfgTransIpv6 DisplayString, targetAddrNewCfgIpVer INTEGER, targetAddrNewCfgTrapBmap OCTET STRING } targetAddrNewCfgIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Target Address table Identifier." ::= { targetAddrNewCfgEntry 1 } targetAddrNewCfgName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "A human readable string representing the name of the target address." ::= { targetAddrNewCfgEntry 2 } targetAddrNewCfgTransIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Target transport address IP." ::= { targetAddrNewCfgEntry 3 } targetAddrNewCfgTransPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Target transport address port." ::= { targetAddrNewCfgEntry 4 } targetAddrNewCfgTagList OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Tag List." ::= { targetAddrNewCfgEntry 5 } targetAddrNewCfgParamsName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The target parameter name." ::= { targetAddrNewCfgEntry 6 } targetAddrNewCfgEnaTrap OBJECT-TYPE SYNTAX INTEGER { console(1), system(2), mgmt(3), cli(4), stp(5), vlan(6), slb(7), gslb(8), filter(9), ssh(10), vrrp(11), bgp(12), ntp(13), ip(16), web(18), synatk(19), tcplim(20), ospf(21), slbatk(23), security(24), rmon(25), ip6(28), appsvc(29) } MAX-ACCESS read-create STATUS current DESCRIPTION "This is an action object to enable Trap to a particular target address. The value specified with this object is number given in this description. 1 - Console, 2 - System, 3 - Mgmt, 4 - Cli ,5 - Stp, 6 - Vlan, 7 - Slb, 8 - Gslb, 9 - Filter, 10 - Ssh, 11 - Vrrp, 12 - Bgp, 13 - Ntp, 16 - Ip, 18 - Web, 19 - Syn-atk, 20 - Tcp Limit, 21 - Ospf, 23 - Slb Attack, 24 - Security, 25 - Rmon, 28 - Ip6, 29 - AppSvc. When read this object, the value '0' is returned always." ::= { targetAddrNewCfgEntry 7 } targetAddrNewCfgDisTrap OBJECT-TYPE SYNTAX INTEGER { console(1), system(2), mgmt(3), cli(4), stp(5), vlan(6), slb(7), gslb(8), filter(9), ssh(10), vrrp(11), bgp(12), ntp(13), ip(16), web(18), synatk(19), tcplim(20), ospf(21), slbatk(23), security(24), rmon(25), ip6(28), appsvc(29) } MAX-ACCESS read-create STATUS current DESCRIPTION "This is an action object to disable Trap to a particular target address. The value specified with this object is number given in this description. 1 - Console, 2 - System, 3 - Mgmt, 4 - Cli ,5 - Stp, 6 - Vlan, 7 - Slb, 8 - Gslb, 9 - Filter, 10 - Ssh, 11 - Vrrp, 12 - Bgp, 13 - Ntp, 16 - Ip, 18 - Web, 19 - Syn-atk, 20 - Tcp Limit, 21 - Ospf, 23 - Slb Attack, 24 - Security, 25 - Rmon, 28 - Ip6, 29 - AppSvc. When read this object, the value '0' is returned always." ::= { targetAddrNewCfgEntry 8 } targetAddrNewCfgDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User" ::= { targetAddrNewCfgEntry 9 } targetAddrNewCfgTransIpv6 OBJECT-TYPE SYNTAX DisplayString ( SIZE ( 0 .. 40 ) ) MAX-ACCESS read-create STATUS current DESCRIPTION "Target transport Ipv6 address. Address should be 16-byte hexadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { targetAddrNewCfgEntry 10 } targetAddrNewCfgIpVer OBJECT-TYPE SYNTAX INTEGER { ipv4 ( 1 ) , ipv6 ( 2 ) } MAX-ACCESS read-only STATUS current DESCRIPTION "Version of the targer Ip Address." ::= { targetAddrNewCfgEntry 11 } targetAddrNewCfgTrapBmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable traps for selected features. Traps for selected features in bitmap format. in receiving order: OCTET 1 OCTET 2 OCTET 3 OCTET4 xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx |||| ||||_ gslb |||| ||||__ Ip |||| ||||___ Security |||| ||||___ not used |||| |||__ slb |||| |||___ Port-Mirror |||| |||____ slb_atk |||| |||____ not used |||| ||___ vlan |||| |||___ Isd |||| ||_____ http-err |||| ||_____ not used |||| |____ stp |||| |_____ ntp |||| |______ ospf |||| |______ appsvc ||||______ cli ||||_______ bgp ||||________ ratelim ||||________ Ip6 |||_______ mgmt |||________ vrrp |||_________ Synk-atk |||_________ log-UFDFO ||________ System ||_________ ssh ||__________ web ||__________ not used |_________ Console |__________ filter |___________ Dps |___________ rmon where x : 1 - Trap is Enabled 0 - Trap is Disabled." ::= { targetAddrNewCfgEntry 12 } agAccessCurCfgSnmpV1V2Access OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable V1/V2 access in the current configuration block." ::= { agAccessSnmpV3 3 } agAccessNewCfgSnmpV1V2Access OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable V1/V2 access in the new configuration block." ::= { agAccessSnmpV3 4 } agCurCfgThresholdInterval OBJECT-TYPE SYNTAX INTEGER (1..1440) MAX-ACCESS read-only STATUS current DESCRIPTION "Threshold detection interval." ::= { agAlertThreshold 1 } agNewCfgThresholdInterval OBJECT-TYPE SYNTAX INTEGER (1..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "Threshold detection interval." ::= { agAlertThreshold 2 } agCurCfgThresholdThrput OBJECT-TYPE SYNTAX INTEGER (0..99) MAX-ACCESS read-only STATUS current DESCRIPTION "Throughput license alert threshold." ::= { agAlertThreshold 3 } agNewCfgThresholdThrput OBJECT-TYPE SYNTAX INTEGER (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Throughput license alert threshold." ::= { agAlertThreshold 4 } agCurCfgThresholdSSLCps OBJECT-TYPE SYNTAX INTEGER (0..99) MAX-ACCESS read-only STATUS current DESCRIPTION "SSL CPS license percentage for threshold alert." ::= { agAlertThreshold 5 } agNewCfgThresholdSSLCps OBJECT-TYPE SYNTAX INTEGER (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "SSL CPS license percentage for threshold alert." ::= { agAlertThreshold 6 } agCurCfgThresholdCompress OBJECT-TYPE SYNTAX INTEGER (0..99) MAX-ACCESS read-only STATUS current DESCRIPTION "Compression license percentage for threshold alert." ::= { agAlertThreshold 7 } agNewCfgThresholdCompress OBJECT-TYPE SYNTAX INTEGER (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Compression license percentage for threshold alert." ::= { agAlertThreshold 8 } licCompanyName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Company Name Detalis." ::= { agLicenseConfig 1 } licSwitchLocation OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Switch Location Details." ::= { agLicenseConfig 2 } licContact OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Contact Details." ::= { agLicenseConfig 3 } licCookie OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "PBind Cookie Configuration." ::= { agLicenseConfig 4 } agSnmpErrorRequestId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The requestId of the request which caused the last error." ::= {agSnmpSetFail 1} agSnmpErrorTbTable OBJECT-TYPE SYNTAX SEQUENCE OF AgSnmpErrorTbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing the list of errors occured" ::= {agSnmpSetFail 2} agSnmpErrorTbEntry OBJECT-TYPE SYNTAX AgSnmpErrorTbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row definition for this table." INDEX { agSnmpErrorTbRequestId } ::= { agSnmpErrorTbTable 1 } AgSnmpErrorTbEntry ::= SEQUENCE { agSnmpErrorTbRequestId INTEGER, agSnmpErrorTbVarId OBJECT IDENTIFIER, agSnmpErrorTbDescription DisplayString, agSnmpErrorTbErrorIndex INTEGER, agSnmpErrorTbType INTEGER, agSnmpErrorTbStatus INTEGER, agSnmpErrorTbFieldInEntry DisplayString, agSnmpErrorTbTime DisplayString, agSnmpErrorTbDate DisplayString } agSnmpErrorTbRequestId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the requestId of the request which caused the error." ::= { agSnmpErrorTbEntry 1 } agSnmpErrorTbVarId OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the variable Oid" ::= { agSnmpErrorTbEntry 2 } agSnmpErrorTbDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the description of the error" ::= { agSnmpErrorTbEntry 3 } agSnmpErrorTbErrorIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the index of the field in the PDU which caused the error (start at 1)" ::= { agSnmpErrorTbEntry 4 } agSnmpErrorTbType OBJECT-TYPE SYNTAX INTEGER { ok(0), application(1), internalRange(2), internalGeneral(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the type of error." ::= { agSnmpErrorTbEntry 5 } agSnmpErrorTbStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), tooBig(1), noSuchName(2), badValue(3), readOnly(4), genErr(5), noAccess(6), wrongType(7), wrongLength(8), wrongEncoding(9), wrongValue(10), noCreation(11), inconsitentValue(12), resourceUnavailable(13), commitFailed(14), undoFailed(15), authorizationErr(16), notWritable(17), inconsitentName(18), lastErr(19)} MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the status of error." ::= { agSnmpErrorTbEntry 6 } agSnmpErrorTbFieldInEntry OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the index of the field in an entry (0 for scalar)" ::= { agSnmpErrorTbEntry 7 } agSnmpErrorTbTime OBJECT-TYPE SYNTAX DisplayString (SIZE(9)) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the time the error occurred, the time will be in the format hh:mm:ss" ::= { agSnmpErrorTbEntry 8 } agSnmpErrorTbDate OBJECT-TYPE SYNTAX DisplayString (SIZE(11)) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the time the error occurred, the date will be in the format dd/mm/yyyy" ::= { agSnmpErrorTbEntry 9 } -- Statistics Group -- Packet Statistics Group -- This group represents Packet Statistics information pktStatsAllocs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack." ::= { pktStats 1 } pktStatsFrees OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of times the packet buffers are freed(released) to the packet buffer pool by the TCP/IP protocol stack." ::= { pktStats 2 } pktStatsAllocFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packet allocation failures from the packet buffer pool by the TCP/IP protocol stack." ::= { pktStats 3} pktStatsMediums OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack." ::= { pktStats 4} pktStatsJumbos OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack." ::= { pktStats 5} pktStatsSmalls OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack." ::= { pktStats 6} pktStatsMediumsHiWatermark OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack." ::= { pktStats 7} pktStatsJumbosHiWatermark OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack." ::= { pktStats 8} pktStatsSmallsHiWatermark OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack." ::= { pktStats 9} pktStatsDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets which were chosen to be discarded because the number of buffers available in the packet buffer pool is low." ::= { pktStats 10} -- MP CPU Statisitics Group mpCpuStatsUtil1Second OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The utilization of MP CPU over 1 second. It shows the percentage." ::= { mpCpuStats 1} mpCpuStatsUtil4Seconds OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The utilization of MP CPU over 4 seconds. It shows the percentage." ::= { mpCpuStats 2} mpCpuStatsUtil64Seconds OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The utilization of MP CPU over 64 seconds. It shows the percentage." ::= { mpCpuStats 3} -- -- Port statistics table -- portStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF PortStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of port statistics." ::= { portStats 1 } portStatsTableEntry OBJECT-TYPE SYNTAX PortStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the port stats table." INDEX { portStatsIndx } ::= { portStatsTable 1 } PortStatsTableEntry ::= SEQUENCE { portStatsIndx Integer32, portStatsPhyIfInOctets Counter64, portStatsPhyIfInUcastPkts Counter64, portStatsPhyIfInNUcastPkts Counter64, portStatsPhyIfInDiscards Counter32, portStatsPhyIfInErrors Counter32, portStatsPhyIfInUnknownProtos Counter32, portStatsPhyIfOutOctets Counter64, portStatsPhyIfOutUcastPkts Counter64, portStatsPhyIfOutNUcastPkts Counter64, portStatsPhyIfOutDiscards Counter32, portStatsPhyIfOutErrors Counter32, portStatsPhyIfOutQLen Gauge32, portStatsPhyIfInBroadcastPkts Counter64, portStatsPhyIfOutBroadcastPkts Counter64, portStatsClear INTEGER, portStatsPhyIfInMcastPkts Counter64, portStatsPhyIfOutMcastPkts Counter64 } portStatsIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port index." ::= { portStatsTableEntry 1 } portStatsPhyIfInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the interface, including framing characters." ::= { portStatsTableEntry 2 } portStatsPhyIfInUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of subnetwork-unicast packets delivered to a higher-layer protocol." ::= { portStatsTableEntry 3 } portStatsPhyIfInNUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol." ::= { portStatsTableEntry 4 } portStatsPhyIfInDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space." ::= { portStatsTableEntry 5 } portStatsPhyIfInErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol." ::= { portStatsTableEntry 6 } portStatsPhyIfInUnknownProtos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received via the interface which were discarded because of an unknown or unsupported protocol." ::= { portStatsTableEntry 7 } portStatsPhyIfOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the interface, including framing characters." ::= { portStatsTableEntry 8 } portStatsPhyIfOutUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent." ::= { portStatsTableEntry 9 } portStatsPhyIfOutNUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent." ::= { portStatsTableEntry 10 } portStatsPhyIfOutDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space." ::= { portStatsTableEntry 11 } portStatsPhyIfOutErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets that could not be transmitted because of errors." ::= { portStatsTableEntry 12 } portStatsPhyIfOutQLen OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The length of the output packet queue (in packets)." ::= { portStatsTableEntry 13 } portStatsPhyIfInBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer." ::= { portStatsTableEntry 14 } portStatsPhyIfOutBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent." ::= { portStatsTableEntry 15 } portStatsClear OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this value to clear(2) clears the stats for this port." ::= { portStatsTableEntry 16 } portStatsPhyIfInMcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. ." ::= { portStatsTableEntry 17 } portStatsPhyIfOutMcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent." ::= { portStatsTableEntry 18 } portMirrorStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF PortMirrorStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of port mirror statistics." ::= { portMirrorStats 1 } portMirrorStatsTableEntry OBJECT-TYPE SYNTAX PortMirrorStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the port mirror stats table." INDEX { portMirrorStatsIndx } ::= { portMirrorStatsTable 1 } PortMirrorStatsTableEntry ::= SEQUENCE { portMirrorStatsIndx Integer32, portMirrorStatsIngress Integer32, portMirrorStatsEgress Integer32 } portMirrorStatsIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port index." ::= { portMirrorStatsTableEntry 1 } portMirrorStatsIngress OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies number of bytes mirrored in ingress port." ::= { portMirrorStatsTableEntry 2 } portMirrorStatsEgress OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies number of bytes mirrored in egress port." ::= { portMirrorStatsTableEntry 3 } portMirrorClear OBJECT IDENTIFIER ::= { portMirrorStats 2 } portMirrorStatsClear OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this value to clear(2) clears the mirror stats." ::= { portMirrorClear 1 } -- Capacity Usage Statistics peakThroughputUsage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak throughput of ports in bits per second." ::= { capacityUsageStats 1 } curThroughputUsage OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Current throughput of ports in bits per second." ::= { capacityUsageStats 2 } peakSslCapUsage OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "Peak SSL capacity usage in CPS." ::= { capacityUsageStats 3 } curSslCapUsage OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "Current SSL capacity usage in CPS." ::= { capacityUsageStats 4 } peakComprsnCapUsage OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "Peak compression capacity usage in Mbps." ::= { capacityUsageStats 5 } curComprsnCapUsage OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "Current compression capacity usage in Mbps." ::= { capacityUsageStats 6 } clearCapacityUsageStats OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this value to clear(2) clears the capacity usage stats." ::= { capacityUsageStats 7 } -- MP Memory Statisitics mpMemStatsTotal OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total memory of MP." ::= { mpMemStats 1 } mpMemStatsFree OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The free memory of MP." ::= { mpMemStats 3 } -- NTP Statisitics ntpPrimaryServerReqSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of NTP requests sent to Primary NTP Server." ::= { ntpStats 1 } ntpPrimaryServerRespRcvd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of NTP responses received from Primary NTP Server." ::= { ntpStats 2 } ntpPrimaryServerUpdates OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of NTP Updates by Primary NTP Server." ::= { ntpStats 3 } ntpSecondaryServerReqSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of NTP requests sent to Secondary NTP Server." ::= { ntpStats 4 } ntpSecondaryServerRespRcvd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of NTP responses received from Secondary NTP Server." ::= { ntpStats 5 } ntpSecondaryServerUpdates OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of NTP Updates by Secondary NTP Server." ::= { ntpStats 6 } ntpLastUpdateServer OBJECT-TYPE SYNTAX INTEGER { none(0), primary(1), secondary(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of ntp server updated last time." ::= { ntpStats 7 } ntpLastUpdateTime OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last time updated by ntp server." ::= { ntpStats 8 } ntpClearStats OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this value to clear(2) clears the stats for ntp." ::= { ntpStats 9 } ntpSystemCurrentTime OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "The current system time." ::= { ntpStats 10 } -- Clear Statistics snmpClearStats OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to clear(2) results in clearing the SNMP statistics." ::= { agClearStats 1 } agDiffState OBJECT-TYPE SYNTAX INTEGER { diff(1), flashdiff(2), idle(3), inprogress(4), complete(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is read the current state is returned. idle(3) indicates that there is no diff in progess. complete(5) indicates that the last diff operation is completed. Setting the value to diff(1), will start a new diff operation Diff compares the new configuration with the current configuration and shows the pending configuration changes. Setting the value to flashdiff(1), will start a new diff operation. flashdiff compares new configuration with the flash configuration. To read the configuration changes use the agDiffTable once the state of this variable returns complete. Once the agDiffTable is read the state should be set back to 'idle' which frees the diff buffer and others can issue a diff command via SNMP." ::= { agDiff 2 } agDiffTableSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of strings in the diff table." ::= { agDiff 3 } agDiffTable OBJECT-TYPE SYNTAX SEQUENCE OF AgDiffTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of diff strings." ::= { agDiff 4 } agDiffTableEntry OBJECT-TYPE SYNTAX AgDiffTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the diff table." INDEX { agDiffIndex } ::= { agDiffTable 1 } AgDiffTableEntry ::= SEQUENCE { agDiffIndex Integer32, agDiffString OCTET STRING } agDiffIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The table index." ::= { agDiffTableEntry 1 } agDiffString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "A string in the diff table." ::= { agDiffTableEntry 2 } -- Config Dump agCfgDumpState OBJECT-TYPE SYNTAX INTEGER { dump(1), idle(2), inprogress(3), complete(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is read the current state is returned. idle(2) indicates that there is no dump in progess. complete(4) indicates that the last dump operation is completed. Setting the value to dump(1), will start a new dump operation Dump will show the current configuration. To read the configuration dump use the agCfgDumpTable once the state of this variable returns complete. Once the agCfgDumpTable is read the state should be set back to 'idle' which frees the dump buffer and others can issue a dump command via SNMP." ::= { agCfgDump 2 } agCfgDumpTableSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of strings in the dump table." ::= { agCfgDump 3 } agCfgDumpTable OBJECT-TYPE SYNTAX SEQUENCE OF AgCfgDumpTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of dump strings." ::= { agCfgDump 4 } agCfgDumpTableEntry OBJECT-TYPE SYNTAX AgCfgDumpTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the dump table." INDEX { agCfgDumpIndex } ::= { agCfgDumpTable 1 } AgCfgDumpTableEntry ::= SEQUENCE { agCfgDumpIndex Integer32, agCfgDumpString OCTET STRING } agCfgDumpIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The table index." ::= { agCfgDumpTableEntry 1 } agCfgDumpString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "A string in the dump table." ::= { agCfgDumpTableEntry 2 } -- SP Statistics for GA -- SP CPU utilization table spGAStatsCpuUtilTable OBJECT-TYPE SYNTAX SEQUENCE OF SpGAStatsCpuUtilTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of SP CPU utilization shown in GA." ::= { spGAStats 1 } spGAStatsCpuUtilTableEntry OBJECT-TYPE SYNTAX SpGAStatsCpuUtilTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the SP CPU utilization table." INDEX { spGAStatsCpuUtilSpIndex } ::= { spGAStatsCpuUtilTable 1 } SpGAStatsCpuUtilTableEntry ::= SEQUENCE { spGAStatsCpuUtilSpIndex Integer32, spGAStatsCpuUtilvADC DisplayString, spGAStatsCpuUtil1Second Integer32, spGAStatsCpuUtil4Seconds Integer32, spGAStatsCpuUtil64Seconds Integer32 } spGAStatsCpuUtilSpIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SP index." ::= { spGAStatsCpuUtilTableEntry 1 } spGAStatsCpuUtilvADC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "vADC's running in this core." ::= { spGAStatsCpuUtilTableEntry 2 } spGAStatsCpuUtil1Second OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The utilization of this SP over 1 second. It shows the percentage." ::= { spGAStatsCpuUtilTableEntry 3 } spGAStatsCpuUtil4Seconds OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The utilization of this SP over 4 seconds. It shows the percentage." ::= { spGAStatsCpuUtilTableEntry 4 } spGAStatsCpuUtil64Seconds OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The utilization of this SP over 64 seconds. It shows the percentage." ::= { spGAStatsCpuUtilTableEntry 5 } -- SP Statistics -- SP CPU utilization table spStatsCpuUtilTable OBJECT-TYPE SYNTAX SEQUENCE OF SpStatsCpuUtilTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of SP CPU utilization." ::= { spStats 1 } spStatsCpuUtilTableEntry OBJECT-TYPE SYNTAX SpStatsCpuUtilTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the SP CPU utilization table." INDEX { spStatsCpuUtilSpIndex } ::= { spStatsCpuUtilTable 1 } SpStatsCpuUtilTableEntry ::= SEQUENCE { spStatsCpuUtilSpIndex Integer32, spStatsCpuUtil1Second Integer32, spStatsCpuUtil4Seconds Integer32, spStatsCpuUtil64Seconds Integer32 } spStatsCpuUtilSpIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SP index." ::= { spStatsCpuUtilTableEntry 1 } spStatsCpuUtil1Second OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The utilization of this SP over 1 second. It shows the percentage." ::= { spStatsCpuUtilTableEntry 2 } spStatsCpuUtil4Seconds OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The utilization of this SP over 4 seconds. It shows the percentage." ::= { spStatsCpuUtilTableEntry 3 } spStatsCpuUtil64Seconds OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The utilization of this SP over 64 seconds. It shows the percentage." ::= { spStatsCpuUtilTableEntry 4 } -- SP Maintenance Statistics spMaintStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SpMaintStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of SP maintenance statistics." ::= { spStats 2 } spMaintStatsTableEntry OBJECT-TYPE SYNTAX SpMaintStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the SP maintenance statistics table." INDEX { spMaintStatsSpIndex } ::= { spMaintStatsTable 1 } SpMaintStatsTableEntry ::= SEQUENCE { spMaintStatsSpIndex Integer32, spMaintStatsResolveErrNoddw Counter32, spMaintStatsLearnErrNoddw Counter32, spMaintStatsAgeMPNoddw Counter32, spMaintStatsDeleteMiss Counter32, spMaintStatsRecvLetErrorsMP Counter32, spMaintStatsRecvLetErrorsSP1 Counter32, spMaintStatsRecvLetErrorsSP2 Counter32, spMaintStatsRecvLetErrorsSP3 Counter32, spMaintStatsRecvLetErrorsSP4 Counter32, spMaintStatsSendLetFailsMP Counter32, spMaintStatsSendLetFailsSP1 Counter32, spMaintStatsSendLetFailsSP2 Counter32, spMaintStatsSendLetFailsSP3 Counter32, spMaintStatsSendLetFailsSP4 Counter32, spMaintStatsRecvLetSuccessMP Counter32, spMaintStatsRecvLetSuccessSP1 Counter32, spMaintStatsRecvLetSuccessSP2 Counter32, spMaintStatsRecvLetSuccessSP3 Counter32, spMaintStatsRecvLetSuccessSP4 Counter32, spMaintStatsSendLetSuccessMP Counter32, spMaintStatsSendLetSuccessSP1 Counter32, spMaintStatsSendLetSuccessSP2 Counter32, spMaintStatsSendLetSuccessSP3 Counter32, spMaintStatsSendLetSuccessSP4 Counter32, spMaintStatsRecvLetErrorsSP5 Counter32, spMaintStatsRecvLetErrorsSP6 Counter32, spMaintStatsRecvLetErrorsSP7 Counter32, spMaintStatsSendLetFailsSP5 Counter32, spMaintStatsSendLetFailsSP6 Counter32, spMaintStatsSendLetFailsSP7 Counter32, spMaintStatsRecvLetSuccessSP5 Counter32, spMaintStatsRecvLetSuccessSP6 Counter32, spMaintStatsRecvLetSuccessSP7 Counter32, spMaintStatsSendLetSuccessSP5 Counter32, spMaintStatsSendLetSuccessSP6 Counter32, spMaintStatsSendLetSuccessSP7 Counter32, spMaintStatsRateLimitArpDrops Counter32, spMaintStatsRateLimitIcmpDrops Counter32, spMaintStatsRateLimitTcpDrops Counter32, spMaintStatsRateLimitUdpDrops Counter32, spMaintStatsPfdbFreeEmpty Counter32 } spMaintStatsSpIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SP index." ::= { spMaintStatsTableEntry 1 } spMaintStatsPfdbFreeEmpty OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the attempts were made to add entries to an already full FDB." ::= { spMaintStatsTableEntry 2 } spMaintStatsResolveErrNoddw OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times MAC address resolution failed because there were no DMA descriptors." ::= { spMaintStatsTableEntry 3 } spMaintStatsLearnErrNoddw OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times MAC address learn failed because there were no DMA descriptors." ::= { spMaintStatsTableEntry 4 } spMaintStatsAgeMPNoddw OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times MAC address aging failed because there were no DMA descriptors." ::= { spMaintStatsTableEntry 5 } spMaintStatsDeleteMiss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times MAC address could not be found." ::= { spMaintStatsTableEntry 6 } spMaintStatsRecvLetErrorsMP OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of receive letter errors from MP." ::= { spMaintStatsTableEntry 7 } spMaintStatsRecvLetErrorsSP1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of receive letter errors from SP1. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 8 } spMaintStatsRecvLetErrorsSP2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of receive letter errors from SP2. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 9 } spMaintStatsRecvLetErrorsSP3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of receive letter errors from SP3. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 10 } spMaintStatsRecvLetErrorsSP4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of receive letter errors from SP4. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 11 } spMaintStatsSendLetFailsMP OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of send letter failures to MP." ::= { spMaintStatsTableEntry 12 } spMaintStatsSendLetFailsSP1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of send letter failures to SP1. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 13 } spMaintStatsSendLetFailsSP2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of send letter failures to SP2. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 14 } spMaintStatsSendLetFailsSP3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of send letter failures to SP3. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 15 } spMaintStatsSendLetFailsSP4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of send letter failures to SP4. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 16 } spMaintStatsRecvLetSuccessMP OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of receive letter success from MP." ::= { spMaintStatsTableEntry 17 } spMaintStatsRecvLetSuccessSP1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of receive letter success from SP1. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 18 } spMaintStatsRecvLetSuccessSP2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of receive letter success from SP2. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 19 } spMaintStatsRecvLetSuccessSP3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of receive letter success from SP3. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 20 } spMaintStatsRecvLetSuccessSP4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of receive letter success from SP4. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 21 } spMaintStatsSendLetSuccessMP OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of send letter success to MP." ::= { spMaintStatsTableEntry 22 } spMaintStatsSendLetSuccessSP1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of send letter success to SP1. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 23 } spMaintStatsSendLetSuccessSP2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of send letter success to SP2. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 24 } spMaintStatsSendLetSuccessSP3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of send letter success to SP3. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 25 } spMaintStatsSendLetSuccessSP4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of send letter success to SP4. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 26 } spMaintStatsRateLimitArpDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of ARP packets dropped due to rate limiting." ::= { spMaintStatsTableEntry 27 } spMaintStatsRateLimitIcmpDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of ICMP packets are dropped due to rate limiting." ::= { spMaintStatsTableEntry 28 } spMaintStatsRateLimitTcpDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of TCP packets are dropped due to rate limiting." ::= { spMaintStatsTableEntry 29 } spMaintStatsRateLimitUdpDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of UDP packets are dropped due to rate limiting." ::= { spMaintStatsTableEntry 30 } spMaintStatsRecvLetErrorsSP5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of receive letter errors from SP5. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 31 } spMaintStatsRecvLetErrorsSP6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of receive letter errors from SP6. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 32 } spMaintStatsRecvLetErrorsSP7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of receive letter errors from SP7. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 33 } spMaintStatsSendLetFailsSP5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of send letter failures to SP5. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 34 } spMaintStatsSendLetFailsSP6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of send letter failures to SP6. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 35 } spMaintStatsSendLetFailsSP7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of send letter failures to SP7. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 36 } spMaintStatsRecvLetSuccessSP5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of receive letter success from SP5. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 37 } spMaintStatsRecvLetSuccessSP6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of receive letter success from SP6. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 38 } spMaintStatsRecvLetSuccessSP7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of receive letter success from SP7. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 39 } spMaintStatsSendLetSuccessSP5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of send letter success to SP5. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 40 } spMaintStatsSendLetSuccessSP6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of send letter success to SP6. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 41 } spMaintStatsSendLetSuccessSP7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of send letter success to SP7. If the current table index is the same as the SP number then a value of 0 is returned." ::= { spMaintStatsTableEntry 42 } spMemUsageStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SpMemUsageStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of SP memory statistics." ::= { spStats 4 } spMemUsageStatsTableEntry OBJECT-TYPE SYNTAX SpMemUsageStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the SP memory statistics table." INDEX { spMemUsageStatsIndex } ::= { spMemUsageStatsTable 1 } SpMemUsageStatsTableEntry ::= SEQUENCE { spMemUsageStatsIndex Integer32, spMemUsageStatsCurrentMemory Integer32, spMemUsageStatsHiWaterMark Integer32 } spMemUsageStatsIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SP index." ::= { spMemUsageStatsTableEntry 1 } spMemUsageStatsCurrentMemory OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current memory usage of SP in KiloBytes." ::= { spMemUsageStatsTableEntry 2 } spMemUsageStatsHiWaterMark OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The high watermark of memory usage in KiloBytes." ::= { spMemUsageStatsTableEntry 3 } -- Management Port Statistics mgmtStatsRxpackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack." ::= { mgmtStats 1 } mgmtStatsRxErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol." ::= { mgmtStats 2 } mgmtStatsRxDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets that were dropped." ::= { mgmtStats 3 } mgmtStatsRxOverruns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of data overruns over this link." ::= { mgmtStats 4 } mgmtStatsRxFrame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received on this link." ::= { mgmtStats 5 } mgmtStatsTxpackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack." ::= { mgmtStats 6 } mgmtStatsTxErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol." ::= { mgmtStats 7 } mgmtStatsTxDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets that were dropped." ::= { mgmtStats 8 } mgmtStatsTxOverruns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of data overruns over this link." ::= { mgmtStats 9 } mgmtStatsTxCarrier OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a this interface." ::= { mgmtStats 10 } mgmtStatsTxCollisions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of collisions on this outbound segment." ::= { mgmtStats 11 } mgmtStatsTxQueueLen OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The length of the TCP transmit queue." ::= { mgmtStats 12 } mgmtStatsRxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes received." ::= { mgmtStats 13 } mgmtStatsRxMulticast OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of multicast packets received." ::= { mgmtStats 14 } mgmtStatsTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes transmitted." ::= { mgmtStats 15 } -- IP ACL Bogon Info ipAclBogonInfo OBJECT IDENTIFIER ::= { securityInfo 1 } ipAclBogonInfoTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bogon IPs in IP ACL table." ::= { ipAclBogonInfo 1 } ipAclBogonInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IpAclBogonInfoTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of bogons." ::= { ipAclBogonInfo 2 } ipAclBogonInfoTableEntry OBJECT-TYPE SYNTAX IpAclBogonInfoTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the bogon IP ACL table." INDEX { ipAclBogonInfoIndex } ::= { ipAclBogonInfoTable 1 } IpAclBogonInfoTableEntry ::= SEQUENCE { ipAclBogonInfoIndex Integer32, ipAclBogonInfoIp IpAddress, ipAclBogonInfoMask IpAddress } ipAclBogonInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The table index." ::= { ipAclBogonInfoTableEntry 1 } ipAclBogonInfoIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Bogon IP Address." ::= { ipAclBogonInfoTableEntry 2 } ipAclBogonInfoMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Mask for the bogon IP." ::= { ipAclBogonInfoTableEntry 3 } -- End of Bogon Info -- Management Port Infor mgmtPortInfoSpeed OBJECT-TYPE SYNTAX INTEGER { mbs10(1), mbs100(2), any(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational speed of the management port." ::= { mgmtInfo 1 } mgmtPortInfoMode OBJECT-TYPE SYNTAX INTEGER { full-duplex(1), half-duplex(2), any(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational mode of the management port." ::= { mgmtInfo 2 } mgmtPortInfoLink OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational link status of the management port." ::= { mgmtInfo 3 } hwMainBoardNumber OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The hardware main board number of the Alteon Switch." ::= { hardware 6 } hwMainBoardRevision OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The hardware main board revision. If the revision is not available, a zero length string should be returned." ::= { hardware 7 } hwEthernetBoardNumber OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The hardware ethernet board number of the Alteon Switch." ::= { hardware 8 } hwEthernetBoardRevision OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The hardware ethernet board revision. If the revision is not available, a zero length string should be returned." ::= { hardware 9 } hwMACAddress OBJECT-TYPE SYNTAX DisplayString (SIZE(0..48)) MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address." ::= { hardware 13 } hwFABNumber OBJECT-TYPE SYNTAX DisplayString (SIZE(0..48)) MAX-ACCESS read-only STATUS current DESCRIPTION "The FAB number." ::= { hardware 17 } hwSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE(0..48)) MAX-ACCESS read-only STATUS current DESCRIPTION "The switch serial number." ::= { hardware 18 } hwManufacturingDate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..48)) MAX-ACCESS read-only STATUS current DESCRIPTION "The date of manufacturing." ::= { hardware 19 } hwPLDFirmwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..48)) MAX-ACCESS read-only STATUS current DESCRIPTION "The PLD Firmware Version." ::= { hardware 21 } hwTemperatureSensor1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..48)) MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature sensor 1." ::= { hardware 22 } hwTemperatureSensor2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..48)) MAX-ACCESS read-only STATUS current DESCRIPTION "The temperature sensor 2." ::= { hardware 23 } -- Start of AAS hwDRAMSize OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "DRAM Size" ::= {hardware 25} hwFlashSize OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Flash Size" ::= {hardware 26} hwNumberOfHD OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of hard drives." ::= { hardware 27} hwTemperatureThreshold OBJECT IDENTIFIER ::= {hardware 28 } hwTemperatureWarningThresholdGet OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "get the temperature warning threshold" ::= { hwTemperatureThreshold 1} hwTemperatureShutdownThresholdGet OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "get the temperature shutdown threshold" ::= { hwTemperatureThreshold 2} hwTemperatureThresholdStatusCPU1Get OBJECT-TYPE SYNTAX INTEGER { normal(1), warning(2), critical(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "get the threshold status of CPU1 warning - if the warning threshold exceeded critical - if the shutdown threshold exceeded" ::= { hwTemperatureThreshold 3} hwTemperatureThresholdStatusCPU2Get OBJECT-TYPE SYNTAX INTEGER { normal(1), warning(2), critical(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "get the threshold status of CPU2 warning - if the warning threshold exceeded critical - if the shutdown threshold exceeded" ::= { hwTemperatureThreshold 4} hwDualPowerSupplyParams OBJECT IDENTIFIER ::= { hardware 29 } hwPowerSupplyTrapStatus OBJECT-TYPE SYNTAX FeatureStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Enables the user to disable the sending of traps for the power supply status" ::= { hwDualPowerSupplyParams 1 } hwPowerSupplyStatus OBJECT-TYPE SYNTAX INTEGER { singlePowerSupplyOk(1), firstPowerSupplyFailed(2), secondPowerSupplyFailed(3), doublePowerSupplyOk(4), unknownPowerSupplyFailed(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the power supply" ::= { hwDualPowerSupplyParams 2 } hwVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the HW version of the product." ::= { hardware 30 } portStatsPerSecTable OBJECT-TYPE SYNTAX SEQUENCE OF PortStatsPerSecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table for the device ports statistics per second" ::= {portStats 2} portStatsPerSecEntry OBJECT-TYPE SYNTAX PortStatsPerSecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row definition for this table" INDEX { portStatsPortNumber } ::= { portStatsPerSecTable 1} PortStatsPerSecEntry ::= SEQUENCE { portStatsPortNumber Integer32, portStatsInOctetsPerSec Counter64, portStatsInPktsPerSec Counter32, portStatsInDiscardsPerSec Counter32, portStatsInErrorsPerSec Counter32, portStatsOutOctetsPerSec Counter64, portStatsOutPktsPerSec Counter32, portStatsOutDiscardsPerSec Counter32, portStatsOutErrorsPerSec Counter32 } portStatsPortNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port number" ::= { portStatsPerSecEntry 1} portStatsInOctetsPerSec OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of input data in octets in the last sec" ::= { portStatsPerSecEntry 2} portStatsInPktsPerSec OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of input data in packets in the last sec" ::= { portStatsPerSecEntry 3} portStatsInDiscardsPerSec OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "amount of input data that got discarded in the last sec" ::= { portStatsPerSecEntry 4} portStatsInErrorsPerSec OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of input data that have error in the last sec" ::= { portStatsPerSecEntry 5} portStatsOutOctetsPerSec OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of output data in octets in the last sec" ::= { portStatsPerSecEntry 6} portStatsOutPktsPerSec OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of output data in packets in the last sec" ::= { portStatsPerSecEntry 7} portStatsOutDiscardsPerSec OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of output data that got discarded in the last sec" ::= { portStatsPerSecEntry 8} portStatsOutErrorsPerSec OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of output data that have error in the last sec" ::= { portStatsPerSecEntry 9} portStatsTotalPerSec OBJECT IDENTIFIER ::= { portStats 3 } portStatsTotalInOctetsPerSec OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of total input in octets on all ports per second" ::= { portStatsTotalPerSec 1 } -- End of AAS -- Vision Driver file agVisionDriverActiveName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..100)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the active vision driver stored on the device." ::= { agSystem 71 } agVisionDriverRestoreFromBackup OBJECT-TYPE SYNTAX INTEGER { activate(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Restores the backup vision driver." ::= { agSystem 72 } agentTimeInfo OBJECT IDENTIFIER ::= { agentInfo 11 } agSwitchUpTime OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Time since the switch is up in DisplayString, sysUpTime also provides the same data in TimeTicks." ::= { agentTimeInfo 1 } agSwitchConfigChangeTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the last configuration change." ::= { agentTimeInfo 2 } agSwitchConfigChangeTimeStr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "Last configuration change time same as agSwitchConfigChangeTime but in user readable format." ::= { agentTimeInfo 3 } -- End of Vision Driver file END