ARRIS-C3-SUBINT-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32 FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF TruthValue FROM SNMPv2-TC TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC cmtsC3 FROM ARRIS-MIB; cmtsC3SubIntMIB MODULE-IDENTITY LAST-UPDATED "200308200000Z" -- 20th August 2003 ORGANIZATION "Arris International" CONTACT-INFO " Network Management Postal: Arris International. 4400 Cork Airport Business Park Cork Airport, Kinsale Road Cork, Ireland. Tel: +353 21 7305 800 Fax: +353 21 4321 972" DESCRIPTION "This MIB manages the Sub-Interface software on the Arris CMTS C3" ::= { cmtsC3 11 } dcxSubIntObjects OBJECT IDENTIFIER ::= { cmtsC3SubIntMIB 1 } dcxSubIntControlGroup OBJECT IDENTIFIER ::= { dcxSubIntObjects 1 } -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- SUB INTERFACE TABLE -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- dcxSubIntTable OBJECT-TYPE SYNTAX SEQUENCE OF DcxSubIntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Arris C3 Proprietary Sub-Interface table" ::= { dcxSubIntControlGroup 1 } dcxSubIntEntry OBJECT-TYPE SYNTAX DcxSubIntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the dcxSubIntTable. An entry in this table exists for each Sub-Interface configured on the CMTS" INDEX {dcxSubIntSlotIndex, dcxSubIntPortIndex, dcxSubIntSubIntIndex} ::= { dcxSubIntTable 1 } DcxSubIntEntry ::= SEQUENCE { dcxSubIntSlotIndex Unsigned32, dcxSubIntPortIndex Unsigned32, dcxSubIntSubIntIndex Unsigned32, dcxSubIntBridgeGroupNum Unsigned32, dcxSubIntManagementAccess TruthValue, dcxSubIntPrimaryIpAddress IpAddress, dcxSubIntPrimaryIpMask IpAddress, dcxSubIntPrimaryIpBCastAddress IpAddress, dcxSubIntRelayEnabled TruthValue, dcxSubIntRelayInformationOption TruthValue, dcxSubIntGiaddrPolicy INTEGER, dcxSubIntInboundAclIndex Unsigned32, dcxSubIntOutgoingAclIndex Unsigned32, dcxSubIntUnboundTag Unsigned32, dcxSubIntUnboundTagIsNative TruthValue, dcxSubIntOperational TruthValue, dcxSubIntStatus RowStatus } dcxSubIntSlotIndex OBJECT-TYPE SYNTAX Unsigned32(0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "the slot index of the card in the Cmts" ::= { dcxSubIntEntry 1 } dcxSubIntPortIndex OBJECT-TYPE SYNTAX Unsigned32(0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "the port index of the port on a card" ::= { dcxSubIntEntry 2 } dcxSubIntSubIntIndex OBJECT-TYPE SYNTAX Unsigned32(0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "the sub-interface index of the sub-inteface on a port" ::= { dcxSubIntEntry 3 } dcxSubIntBridgeGroupNum OBJECT-TYPE SYNTAX Unsigned32(0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "bridge-group number which the sub-interface is configured on, 0 is reserved, 255 indicates not configured in a bridge-group" ::= { dcxSubIntEntry 4 } dcxSubIntManagementAccess OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "is management of Cmts allowed through sub-interface " ::= { dcxSubIntEntry 5 } dcxSubIntPrimaryIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "primary ip address of sub-interface" ::= { dcxSubIntEntry 6 } dcxSubIntPrimaryIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "primary ip subnet mask of sub-interface" ::= { dcxSubIntEntry 7 } dcxSubIntPrimaryIpBCastAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "primary ip subnet broadcast address of sub-interface" ::= { dcxSubIntEntry 8 } dcxSubIntRelayEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "are DHCP packets relayed on this sub-interface " ::= { dcxSubIntEntry 9 } dcxSubIntRelayInformationOption OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "is the information options added to the DHCP packets relayed on this sub-interface. Has no effect if dcxSubIntRelayEnabled is False on the sub-interface." ::= { dcxSubIntEntry 10 } dcxSubIntGiaddrPolicy OBJECT-TYPE SYNTAX INTEGER { off (0), primary (1), policy (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "which giaddr is used for DHCP packets relayed from CPEs on this sub-interface, off(0) is returned when dcxSubIntRelayEnabled is False, primary(1) indicates that the primary address on sub-interface is used, policy(2) indicates that the first secondary is used." ::= { dcxSubIntEntry 11 } dcxSubIntInboundAclIndex OBJECT-TYPE SYNTAX Unsigned32 (0..2999) MAX-ACCESS read-write STATUS current DESCRIPTION "which Access Control List is this sub-interface bound to for inbound packets, a value of zero indicates no ACL binding for inbound packets on the sub-interface" ::= { dcxSubIntEntry 12 } dcxSubIntOutgoingAclIndex OBJECT-TYPE SYNTAX Unsigned32 (0..2999) MAX-ACCESS read-write STATUS current DESCRIPTION "which Access Control List is this sub-interface bound to for outgoing packets, a value of zero indicates no ACL binding for inbound packets on the sub-interface" ::= { dcxSubIntEntry 13 } dcxSubIntUnboundTag OBJECT-TYPE SYNTAX Unsigned32 (0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "sub-interface encapsulate Vlan Tag value, 0 indicates no tag" ::= { dcxSubIntEntry 14 } dcxSubIntUnboundTagIsNative OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "sub-interface will not generate packets with tags when native is configured" ::= { dcxSubIntEntry 15 } dcxSubIntOperational OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "states if the subinterface is operational or not, factors are dcxSubIntStatus and the physical ports oper and admin status" ::= { dcxSubIntEntry 16 } dcxSubIntStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls and reflects the status of rows in this table. Rows in this table may be created by either the create-and-go or create-and-wait paradigms. There is no restriction on changing values in a row of this table while the row is active." ::= { dcxSubIntEntry 17 } -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- SUB INTERFACE IP ADDRESS TABLE -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- dcxSubIntIpTable OBJECT-TYPE SYNTAX SEQUENCE OF DcxSubIntIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Arris C3 Proprietary Sub-Interface table" ::= { dcxSubIntControlGroup 2 } dcxSubIntIpEntry OBJECT-TYPE SYNTAX DcxSubIntIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the dcxSubIntIpTable. An entry in this table exists for each IP address configured on the Sub-Interface identified by the dcxSubIntNumber" INDEX {dcxSubIntSlotIndex, dcxSubIntPortIndex, dcxSubIntSubIntIndex, dcxSubIntIpIndex} ::= { dcxSubIntIpTable 1 } DcxSubIntIpEntry ::= SEQUENCE { dcxSubIntIpIndex Unsigned32, dcxSubIntIpAddress IpAddress, dcxSubIntIpAddressType INTEGER, dcxSubIntIpMask IpAddress, dcxSubIntIpBCastAddress IpAddress, dcxSubIntIpStatus RowStatus } dcxSubIntIpIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "sub-interface secondary IP address index" ::= { dcxSubIntIpEntry 1 } dcxSubIntIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "a secondary ip address of sub-interface" ::= { dcxSubIntIpEntry 2 } dcxSubIntIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "a secondary ip subnet mask of sub-interface" ::= { dcxSubIntIpEntry 3 } dcxSubIntIpBCastAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "a secondary ip subnet broadcast address of sub-interface" ::= { dcxSubIntIpEntry 4 } dcxSubIntIpAddressType OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "primary(1): address is the primary address on the sub-interface, only one allowed secondary(2):address is one of the secondary addresses configured on the sub-interface" ::= { dcxSubIntIpEntry 5 } dcxSubIntIpStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls and reflects the status of rows in this table. Rows in this table may be created by the create-and-go paradigm. There is no restriction on changing values in a row of this table while the row is active." ::= { dcxSubIntIpEntry 6 } -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- CABLE HELPER ADDRESS TABLE -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- dcxSubIntCableHelperTable OBJECT-TYPE SYNTAX SEQUENCE OF DcxSubIntCableHelperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Arris C3 Proprietary Sub-Interface Cable Helper Table" ::= { dcxSubIntControlGroup 3 } dcxSubIntCableHelperEntry OBJECT-TYPE SYNTAX DcxSubIntCableHelperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the dcxSubIntCableHelperTable. An entry in this table exists for each cable helper IP address configured on the Sub-Interface which is identified using the dcxSubIntNumber" INDEX {dcxSubIntSlotIndex, dcxSubIntPortIndex, dcxSubIntSubIntIndex, dcxSubIntCableHelperType, dcxSubIntCableHelperIndex} ::= { dcxSubIntCableHelperTable 1 } DcxSubIntCableHelperEntry ::= SEQUENCE { dcxSubIntCableHelperType INTEGER, dcxSubIntCableHelperIndex Unsigned32, dcxSubIntCableHelperIpAddress IpAddress, dcxSubIntCableHelperStatus RowStatus } dcxSubIntCableHelperType OBJECT-TYPE SYNTAX INTEGER { default (0), cm (1), cpe (2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "category of cable helper address. cm(1) these helper addresses are only used when relaying DHCP packets originating from a CM. cpe(2) these helper addresses are only used when relaying DHCP packets originating from a CPE. default(0) these helper addresses are used when: - relaying DHCP packets originating from a CM when no helper address of type cm(1) is configured or - relaying DHCP packets originating from a CPE when no helper address of type cpe(2) is configured" ::= { dcxSubIntCableHelperEntry 1 } dcxSubIntCableHelperIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "sub-interface cable helper index" ::= { dcxSubIntCableHelperEntry 2 } dcxSubIntCableHelperIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "cable helper ip address configured on sub-interface" ::= { dcxSubIntCableHelperEntry 3 } dcxSubIntCableHelperStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls and reflects the status of rows in this table. Rows in this table may be created by the create-and-go paradigm. Entries in this table can only be created or deleted, no modification is possible." ::= { dcxSubIntCableHelperEntry 4 } -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- VLAN TAG TABLE -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- dcxSubIntVlanTagTable OBJECT-TYPE SYNTAX SEQUENCE OF DcxSubIntVlanTagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Arris C3 Proprietary Sub-Interface Vlan Tag Table" ::= { dcxSubIntControlGroup 4 } dcxSubIntVlanTagEntry OBJECT-TYPE SYNTAX DcxSubIntVlanTagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the dcxSubIntVlanTagTable. An entry in this table exists for each Vlan tag that is configured on the sub-interface (which is identified using the dcxSubIntNumber)" INDEX {dcxSubIntSlotIndex, dcxSubIntPortIndex, dcxSubIntSubIntIndex, dcxSubIntVlanTag} ::= { dcxSubIntVlanTagTable 1 } DcxSubIntVlanTagEntry ::= SEQUENCE { dcxSubIntVlanTag Unsigned32, dcxSubIntVlanNative TruthValue, dcxSubIntVlanIsBound TruthValue, dcxSubIntBoundVlanSlotIndex Integer32, dcxSubIntBoundVlanPortIndex Integer32, dcxSubIntBoundVlanSubIntIndex Integer32, dcxSubIntBoundVlanTag Unsigned32, dcxSubIntBoundVlanNative TruthValue, dcxSubIntVlanTagStatus RowStatus } dcxSubIntVlanTag OBJECT-TYPE SYNTAX Unsigned32(0..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "sub-interface Vlan Tag value, 0 indicates no tag" ::= { dcxSubIntVlanTagEntry 1 } dcxSubIntVlanNative OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "sub-interface will not generate packets with tags when native is configured" ::= { dcxSubIntVlanTagEntry 2 } dcxSubIntVlanIsBound OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "is sub-interface tag bound to another sub-interface's VLAN tag" ::= { dcxSubIntVlanTagEntry 3 } dcxSubIntBoundVlanSlotIndex OBJECT-TYPE SYNTAX Integer32(-1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "slot index of VLAN tag that dcxSubIntVlanTag is bound to -1 when VLAN not bound to another VLAN tag on another sub-interface" ::= { dcxSubIntVlanTagEntry 4 } dcxSubIntBoundVlanPortIndex OBJECT-TYPE SYNTAX Integer32(-1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "port index of VLAN tag that dcxSubIntVlanTag is bound to -1 returned when VLAN not bound to another VLAN tag on another sub-interface" ::= { dcxSubIntVlanTagEntry 5 } dcxSubIntBoundVlanSubIntIndex OBJECT-TYPE SYNTAX Integer32(-1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "sub interface index of VLAN tag that dcxSubIntVlanTag is bound to -1 returned when VLAN not bound to another VLAN tag on another sub-interface" ::= { dcxSubIntVlanTagEntry 6 } dcxSubIntBoundVlanTag OBJECT-TYPE SYNTAX Unsigned32(0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "sub-interface Vlan Tag value, 0 indicates no tag" ::= { dcxSubIntVlanTagEntry 7 } dcxSubIntBoundVlanNative OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "bound sub-interface will not generate packets with tags when native is configured FLASE will be returned when VLAN not bound to another VLAN tag on another sub-interface" ::= { dcxSubIntVlanTagEntry 8 } dcxSubIntVlanTagStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls and reflects the status of rows in this table. Rows in this table may be created by the create-and-go paradigm. There is no restriction on changing values in a row of this table while the row is active." ::= { dcxSubIntVlanTagEntry 9 } END