BCS-TRAPS-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress, TimeTicks, OBJECT-TYPE, Integer32, MODULE-IDENTITY FROM SNMPv2-SMI DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC bcs FROM BCS-IDENT-MIB; bcsTraps MODULE-IDENTITY LAST-UPDATED "200603280000Z" ORGANIZATION "Motorola Connected Home Solutions" CONTACT-INFO "Motorola Technical Response Center Inside USA 1-888-944-HELP (1-888-944-4357) Outside USA 1-215-323-0044 TRC Hours: Monday through Friday 8am - 7pm Eastern Standard Time Saturdays 10am - 5pm Eastern Standard Time" DESCRIPTION "The MIB module for the bcs common trap objects." ::= {bcs 3} -- The MIB tree for this MIB is shown below: -- -- There are 12 mandatory varbinds." -- -- -- The objects in this MIB are organized as follows: -- -- .gi -- .bcs -- .bcsTraps -- .bcsTrapElements -- ALL OF THESE 12 ELEMENTS ARE MANDATORY. -- .trapIdentifier -- .trapSequenceId -- .trapNetworkElemModelNumber -- .trapNetworkElemSerialNum -- .trapPerceivedSeverity -- .trapNetworkElemOperState -- .trapNetworkElemAlarmStatus -- .trapNetworkElemAdminState -- .trapNetworkElemAvailStatus -- .trapText -- .trapChangedObjectId -- .trapNELastTrapTimeStamp -- THESE TRAP ELEMENTS ARE OPTIONAL -- .trapChangedValueInteger -- .trapAdditionalInfoInteger1 -- .trapAdditionalInfoInteger2 -- .trapAdditionalInfoInteger3 -- .trapChangedValueDisplayString -- .trapChangedValueOID -- .trapChangedValueIPaddress -- .bcstrapControl -- .bcsNumberOftrapReceivers -- .trapReceiversTable -- .trapReceiversTableIndex -- .trapReceiverAddr -- .trapReceiverCommunityString -- .trapToBeSendQueueSize -- .trapSentQueueSize -- .trapThrottlingRate -- .trapLastSent -- .trapReceiversEntryOperState -- .trapResendRequest -- .bcsNumberOfDiscriminators -- .trapDiscrimTable -- .trapDiscrimTableIndex -- .trapDiscrimReceiverAddr -- .trapDiscrimAvailabilityStatus -- .trapDiscrimWeeklyMask -- .trapDiscrimDailyStartTime -- .trapDiscrimDailyStopTime -- .trapSeverityDiscrim -- .trapDiscrimOperationalState -- .trapDiscrimConfigChangeCntl -- -- **************************************************************************** -- groups in the bcs-TRAPS MIB bcsTrapElements OBJECT IDENTIFIER ::= { bcsTraps 1 } bcsTrapControl OBJECT IDENTIFIER ::= { bcsTraps 2 } -- -- Must define configuration change control state and action values - used by -- Configuration change control traps -- ConfigChangeState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the current state of a configuration change" SYNTAX INTEGER { staged(1), applied(2), saved(3) } -- ConfigChangeAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the action required to instantiate configuration change." SYNTAX INTEGER { waitingRetune(1), waitingSave(2), waitingReboot(3) } -- -- -- The bcs Trap Elements Group. -- -- This group contains those objects which are specifically related -- to trap and alarm processing by the Motorola agents and proxies. -- All standard SNMP traps defined for the differnt standard SNMP MIBs -- are always supported. The traps defined here are optional bcs -- enterprise specific notofications for bcs products and represent -- only the common portion of the trap PDU. -- -- Trap processing within the agents is controlled by bcsTrapControl -- group. This group includes the definitions of Discriminators -- (Trap Filters). -- -- Within each network agent, there is a mechanism to -- throttle the issuance of traps to the network manager. -- The principles governing the throttling of traps are -- as follows: -- (1) Traps should be sent to the manager no faster than -- a pre-determined rate. This rate is contained in this -- SNMP object - TrapThrottlingRate -- that can be set by the network manager. A -- default value of one trap per second is recommended. -- (2) The SNMP agent can receive a burst of traps which -- need to be sent to the network manager. The SNMP -- agent shall have a buffer in which traps can be -- queued for sending to the manager. The traps should -- be kept in sequence by the time at which the traps -- were received. An initial buffer limit of 50 traps -- is recommended. This size may require adjustment -- based on the type of network element, and the types -- of events that can occur. Max Value is 300 traps. -- (3) When the SNMP agent receives a request to send a trap, -- it checks whether the trap is to be forwarded to the -- network manager by checking applicable Disriminators, -- If the trap is to be forwared and the trap buffer is full, -- a trap message must be discarded. -- -- ******************************************************************* trapIdentifier OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the specific notification issued by the network element." DEFVAL { 2147483647 } ::= { bcsTrapElements 1 } trapSequenceId OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the specific notification issued by the network element." ::= { bcsTrapElements 2 } trapNetworkElemModelNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object is the model number of the network element. Combination of Model # and Serial # is used as the unique identifier of the NE." ::= { bcsTrapElements 3} trapNetworkElemSerialNum OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object is the serial number of the network element. Combination of Model # and Serial # is used as the unique identifier of the NE." ::= { bcsTrapElements 4} trapPerceivedSeverity OBJECT-TYPE SYNTAX INTEGER { cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter defines five severity levels, which provide an indication of how it is perceived that the capability of the managed object has been affected. The other level is not a severity level, but indicates that an alarm has been cleared, and thus is no longer in alarm state. Note that this field has no meaning for configuration change traps. " ::= { bcsTrapElements 5 } trapNetworkElemOperState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current Operational State of the Network Element which generated the trap." ::= { bcsTrapElements 6 } trapNetworkElemAlarmStatus OBJECT-TYPE SYNTAX INTEGER { idle(1), indeterminate(2), warning(3), minor(4), major(5), critical(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current Alarm Status of the Network Element Alarm Status is always equal to the highest severity level of all outstanding alarms in this NE." ::= { bcsTrapElements 7 } trapNetworkElemAdminState OBJECT-TYPE SYNTAX INTEGER { locked(1), unlocked(2), shuttingDown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current Adminsitrative state of the network element." ::= { bcsTrapElements 8 } trapNetworkElemAvailStatus OBJECT-TYPE SYNTAX INTEGER { inTest(1), failed(2), powerOff(3), offLine(4), offDuty(5), dependency(6), degraded(7), notInstalled(8), logFull(9), available(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current Operational state of the network elment is defined in ISO/IEC 10164-2." ::= {bcsTrapElements 9 } trapText OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This variable contains an optional trap text." ::= { bcsTrapElements 10 } trapNETrapLastTrapTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This OBJECT IDENTIFIER is used to hold time, in hundreths of a second since the network management portion of the system was last re-initialized." ::= { bcsTrapElements 11 } trapChangedObjectId OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "This variable identifies the object that has generated the trap." ::= { bcsTrapElements 12 } -- ************************************************************************************* -- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -- ************************************************************************************* -- The above Trap Elements HAVE to be included in every trap ! -- The following trap elements are included in trap pdu if appropriate. -- ************************************************************************************* -- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -- ************************************************************************************* trapAdditionalInfoInteger1 OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This 32 bit integer is used to hold specific information about the trap." DEFVAL { 2147483647 } ::= { bcsTrapElements 13 } trapAdditionalInfoInteger2 OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This 32 bit integer is used to hold specific information about the trap. " DEFVAL { 2147483647 } ::= { bcsTrapElements 14 } trapAdditionalInfoInteger3 OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This 32 bit integer is used to hold specific information about the trap. " DEFVAL { 2147483647 } ::= { bcsTrapElements 15 } trapChangedValueDisplayString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This DisplayString is used to hold specific information about the trap." ::= { bcsTrapElements 16 } trapChangedValueOID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This OBJECT IDENTIFIER is used to hold specific information about the trap." ::= { bcsTrapElements 17 } trapChangedValueIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This OBJECT IDENTIFIER is used to hold specific information about the trap." ::= { bcsTrapElements 18 } trapChangedValueInteger OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This 32 bit integer is used to hold specific information about the trap. " DEFVAL { 2147483647 } ::= { bcsTrapElements 19 } -- **************************************************************** -- -- TRAP DEFINITIONS -- -- -- Every trap generated by any BCS agent will include the first 12 identical -- fields. If particular variable is not supported in -- particular TRAP then a default value will be returned. -- -- DESCRIPTION will include explanation of use of generic -- variables (trapChangedValue******.) If no -- DESCRIPTION is given then generic variables will contain -- default values. -- -- THE FOLLOWING TRAPS ARE SHOWN FOR REFERENCE ONLY. -- THEY SHOULD BE DUPLICATED FOR ALL SUPPORTED BCS PRODUCTS -- -- -- THE REMAINDER OF THE TRAP DEFINITION SHOULD NOT CHANGE. -- -- ***************************************************************** -- -- trapNewNEFound NOTIFICATION-TYPE -- OBJECTS -- { -- trapIdentifier, -- trapSequenceId, -- trapNetworkElemModelNumber, -- trapNetworkElemSerialNum, -- trapPerceivedSeverity, -- trapNetworkElemOperState, -- trapNetworkElemAlarmStatus, -- trapNetworkElemAdminState, -- trapNetworkElemAvailStatus, -- trapText, -- trapNETrapLastTrapTimeStamp -- trapChangedObjectId -- } -- -- STATUS CURRENT -- -- DESCRIPTION -- "This trap is isssued if a Proxy Agent Detected A New NE. -- trapPerceivedSeverity - 'indeterminate' -- trapChangedObjectId - This identifies the new Network Element. -- Typically, this will be the oid+instance of a table row in -- the proxy agent which contains information about the proxied -- agents. The manager is expected to go to this row of the -- indicated table and read the information about the new -- proxy. The table is implementation specific, but for NLS -- TNS devices, it is HFCCommon. " -- -- ::= {bcsEvents 1} -- -- -- trapNewNELost NOTIFICATION-TYPE -- STATUS CURRENT -- OBJECTS -- { -- trapIdentifier, -- trapSequenceId, -- trapNetworkElemModelNumber, -- trapNetworkElemSerialNum, -- trapPerceivedSeverity, -- trapNetworkElemOperState, -- trapNetworkElemAlarmStatus, -- trapNetworkElemAdminState, -- trapNetworkElemAvailStatus, -- trapText, -- trapNETrapLastTrapTimeStamp -- trapChangedObjectId -- } -- DESCRIPTION -- "This trap is isssued if a Proxy Agent lost communication with NE. -- trapPerceivedSeverity - 'critical' -- trapChangedObjectId - This identifies the lost Network Element." -- Typically, this will be the oid+instance of a table row in -- the proxy agent which contains information about the proxied -- agents. The manager is expected to go to this row of the -- indicated table and read the information about the new -- proxy. The table is implementation specific, but for NLS -- TNS devices, it is HFCCommon. " -- ::= { bcsEvents 2} -- -- -- trapConfigurationChangeInteger NOTIFICATION-TYPE -- STATUS CURRENT -- OBJECTS -- { -- trapIdentifier, -- trapSequenceId, -- trapNetworkElemModelNumber, -- trapNetworkElemSerialNum, -- trapPerceivedSeverity, -- trapNetworkElemOperState, -- trapNetworkElemAlarmStatus, -- trapNetworkElemAdminState, -- trapNetworkElemAvailStatus, -- trapText, -- trapNETrapLastTrapTimeStamp -- trapChangedObjectId, -- trapChangedValueInteger, -- trapAdditionalInfoInteger1, -- trapAdditionalInfoInteger2 -- } -- DESCRIPTION -- "This trap is issued if configuration of a single variable -- with integer type was changed (via ANY interface). -- TrapChangedValueInteger variable may contain current reading -- of that variable. -- trapPerceivedSeverity - 'indeterminate'" -- ::= {bcsEvents 3} -- -- -- trapConfigurationChangeDisplayString NOTIFICATION-TYPE -- STATUS CURRENT -- OBJECTS -- { -- trapIdentifier, -- trapSequenceId, -- trapNetworkElemModelNumber, -- trapNetworkElemSerialNum, -- trapPerceivedSeverity, -- trapNetworkElemOperState, -- trapNetworkElemAlarmStatus, -- trapNetworkElemAdminState, -- trapNetworkElemAvailStatus, -- trapText, -- trapNETrapLastTrapTimeStamp -- trapChangedObjectId, -- trapChangedValueDisplayString, -- trapAdditionalInfoInteger1, -- trapAdditionalInfoInteger2 -- } -- DESCRIPTION -- "This trap is issued if configuration of a single variable -- with DispalayString type was changed (via ANY interface). -- TrapChangedValueDisplayString variable may contain current reading -- of that variable. -- trapPerceivedSeverity - 'indeterminate'" -- ::= {bcsEvents 4} -- -- -- trapConfigurationChangeOID NOTIFICATION-TYPE -- -- OBJECTS -- { -- trapIdentifier, -- trapSequenceId, -- trapNetworkElemModelNumber, -- trapNetworkElemSerialNum, -- trapPerceivedSeverity, -- trapNetworkElemOperState, -- trapNetworkElemAlarmStatus, -- trapNetworkElemAdminState, -- trapNetworkElemAvailStatus, -- trapText, -- trapNETrapLastTrapTimeStamp -- trapChangedObjectId, -- trapChangedValueOID, -- trapAdditionalInfoInteger1, -- trapAdditionalInfoInteger2 -- } -- STATUS CURRENT -- -- DESCRIPTION -- "This trap is issued if configuration of a single variable -- with OID type was changed (via ANY interface). -- trapChangedValueOID variable may contain current reading -- of that variable. -- trapPerceivedSeverity - 'indeterminate'" -- ::= {bcsEvents 5} -- -- trapConfigurationChangeIpAddr NOTIFICATION-TYPE -- -- OBJECTS -- { -- trapIdentifier, -- trapSequenceId, -- trapNetworkElemModelNumber, -- trapNetworkElemSerialNum, -- trapPerceivedSeverity, -- trapNetworkElemOperState, -- trapNetworkElemAlarmStatus, -- trapNetworkElemAdminState, -- trapNetworkElemAvailStatus, -- trapText, -- trapNETrapLastTrapTimeStamp -- trapChangedObjectId, -- trapChangedValueIpAddress, -- trapAdditionalInfoInteger1, -- trapAdditionalInfoInteger2 -- } -- STATUS CURRENT -- -- DESCRIPTION -- "This trap is issued if configuration of a single variable -- with IpAddress type was changed (via ANY interface). -- trapChangedValueIpAddress variable may contain current reading -- of that variable. -- trapPerceivedSeverity - 'indeterminate'" -- ::= {bcsEvents 6} -- -- -- trapToBeSendQueueOverflow NOTIFICATION-TYPE -- -- OBJECTS -- { -- trapIdentifier -- trapSequenceId -- trapNetworkElemModelNumber -- trapNetworkElemSerialNum -- trapPerceivedSeverity -- trapNetworkElemOperState -- trapNetworkElemAlarmStatus -- trapNetworkElemAdminState -- trapNetworkElemAvailStatus -- trapText -- trapChangedObjectId -- trapChangedValueInteger -- trapNELastTrapTimeStamp -- } -- STATUS CURRENT -- -- DESCRIPTION -- "This trap is issued if SNMP agent's trapToBeSendQueue is full. -- trapPerceivedSeverity - 'major' -- trapNetworkElemModelNumber - Model # of the Agent -- trapNetworkElemSerialNum - Serial # of the Agent -- trapNetworkElemOperState - from Ident MIB -- trapNetworkElemAlarmStatus - from Ident MIB -- trapNetworkElemAdminState - from Ident MIB -- trapNetworkElemAvailStatus - from Ident MIB" -- ::= { bcsevents 7} -- -- ******************************************************************************** -- Example traps - Each of these is product specific, -- and these examples are for a fictional non-existant product, and -- would appear in that products MIB. -- ******************************************************************************** -- -- -- -- trapVeryImportantAlarm NOTIFICATION-TYPE -- -- OBJECTS -- { -- trapIdentifier, -- trapSequenceId, -- trapNetworkElemModelNumber, -- trapNetworkElemSerialNum, -- trapPerceivedSeverity, -- trapNetworkElemOperState, -- trapNetworkElemAlarmStatus, -- trapNetworkElemAdminState, -- trapNetworkElemAvailStatus, -- trapText, -- trapNETrapLastTrapTimeStamp -- trapChangedObjectId, -- trapChangedValueInteger -- } -- STATUS CURRENT -- DESCRIPTION -- " This trap is issued if Very Important parameter is out of range. -- trapChangedValueInteger variable contains current reading of -- the Very Important parameter." -- ::= { bcsevents 11111} -- -- NOTE: trapPerceivedSeverity is set to the appropriate severity level when -- declaring this alarm, and is set to cleared(1) when this alarm is -- no longer active. The same trap id of 11111 is still used in both cases. -- -- -- trapVeryImportantTableRowChange NOTIFICATION-TYPE -- OBJECTS -- { -- trapIdentifier, -- trapSequenceId, -- trapNetworkElemModelNumber, -- trapNetworkElemSerialNum, -- trapPerceivedSeverity, -- trapNetworkElemOperState, -- trapNetworkElemAlarmStatus, -- trapNetworkElemAdminState, -- trapNetworkElemAvailStatus, -- trapText, -- trapNETrapLastTrapTimeStamp -- trapChangedObjectId, -- trapChangedValueOID -- } -- -- STATUS CURRENT -- -- DESCRIPTION -- "This trap is issued if a row in Very Important Table was changed. -- Lets assume what each row consists of 25 vars. Some USER updated -- one row of our table with 25 new values. . . -- Instead of issuing 25 traps (1 for each element in the changed row) -- we are issuing 1 trap for the entire change. -- -- trapChangedObjectId contains pointer to the Very Important Table. -- trapChangedValueOID contains pointer to the particular row. -- -- In case of configuration change of the single variable -- trapConfigurationChange****** trap-type should be used" -- -- ::= {22222} -- -- Notice that is this case, a special exception has been made to the fact that -- all configuration changes use trap id's 3 through 6. Special circumstances -- of a particular product can dictate the use of trap id's which are -- traditionally used only for alarms to indicate configuration changes. -- -- -- *************************************************************** -- -- bcsTrapControl group -- numberOfTrapReceivers OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of managers to send traps to. This number can not exceed 4" ::= { bcsTrapControl 1 } trapReceiversTable OBJECT-TYPE SYNTAX SEQUENCE OF TrapReceiversEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of managers to send traps to. The number of entries is given by the value of NumTrapReceivers. Maximum number of Trap Receivers is four." ::= { bcsTrapControl 2 } trapReceiversEntry OBJECT-TYPE SYNTAX TrapReceiversEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of managers to send traps." INDEX {trapReceiversTableIndex} ::= { trapReceiversTable 1 } TrapReceiversEntry ::= SEQUENCE { trapReceiversTableIndex INTEGER, trapReceiverAddr IpAddress, trapReceiverCommunityString DisplayString, trapToBeSendQueueSize INTEGER, trapSentQueueSize INTEGER, trapThrottlingRate Integer32, trapLastSent INTEGER, trapReceiversEntryOperState INTEGER, trapResendRequest Integer32 } trapReceiversTableIndex OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index to a trap receiver entry." ::= { trapReceiversEntry 1 } trapReceiverAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the manager to send a trap to. NOTE: Changing TrapReceiverAddr FROM default value to anything else is equivalent of 'creating' of a new entry. Changing trapReceiverAddr TO default value will result in deletion of that entry." ::= { trapReceiversEntry 2 } trapReceiverCommunityString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The community name to use in the trap when sent to the manager." ::= { trapReceiversEntry 3 } trapToBeSendQueueSize OBJECT-TYPE SYNTAX INTEGER (50..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "The agent maintains 2 queues: TrapsToBeSendQueue and TrapsSentQueue. The SNMP agent can receive a burst of traps which need to be sent to the network manager. The SNMP agent will put them in TrapsToBeSendQueue and from there hi will send traps to the a manager at throttling rate. The traps will be kept in sequence by the time at which they came in " DEFVAL { 50 } ::= { trapReceiversEntry 4 } trapSentQueueSize OBJECT-TYPE SYNTAX INTEGER (50..300) MAX-ACCESS read-write STATUS current DESCRIPTION "The agent maintains 2 queues: TrapsToBeSendQueue and TrapsSentQueue. The SNMP agent maintains Trap History (TrapsSentQueue) by saving last 'X' sent traps." DEFVAL { 50 } ::= { trapReceiversEntry 5 } trapThrottlingRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of traps agent can send to a particular manager (trapReceiver) per second. " DEFVAL { 1 } ::= { trapReceiversEntry 6 } trapLastSent OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable contains the last trapSequenceId (sequence number) agent sent to this manager. Upon startup agent will send cold-start trap and set value of TrapLastSent to 1." DEFVAL { 1 } ::= { trapReceiversEntry 7 } trapReceiversEntryOperState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The current Operational State of this entry in trapReceivers Table " DEFVAL { disabled } ::= { trapReceiversEntry 8 } trapResendRequest OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The manager may write this object when the indicated trap (indicated via trapIdentifier) should be resent. It is not intended to be read by the manager, but is read-write for compatability with older SNMP compilers." DEFVAL { 2147483647 } ::= { trapReceiversEntry 9 } -- ////////////////////////////////////////////////////////////////// numberOfDiscriminators OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EFDs (filters) agent has in it's database. This number can not exceed 20 " DEFVAL { 2147483647 } ::= { bcsTrapControl 3 } trapDiscrimTable OBJECT-TYPE SYNTAX SEQUENCE OF TrapDiscrimEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of EFDs (trap filters). Before forwarding trap to a trapReceiver (manager) agent filters all traps acording to all EFDs defined for this manager." ::= { bcsTrapControl 4 } trapDiscrimEntry OBJECT-TYPE SYNTAX TrapDiscrimEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of discriminators (trap filters.)" INDEX { trapDiscrimTableIndex} ::= { trapDiscrimTable 1 } TrapDiscrimEntry ::= SEQUENCE { trapDiscrimTableIndex INTEGER, trapDiscrimReceiverAddr IpAddress, trapDiscrimAvailabilityStatus INTEGER, trapDiscrimWeeklyMask DisplayString, trapDiscrimDailyStartTime INTEGER, trapDiscrimDailyStopTime INTEGER, trapSeverityDiscrim INTEGER, trapDiscrimOperationalState INTEGER, trapDiscrimConfigChangeCntl INTEGER } trapDiscrimTableIndex OBJECT-TYPE SYNTAX INTEGER (1..20) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index to a trap discriminator entry." ::= { trapDiscrimEntry 1 } trapDiscrimReceiverAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the manager this Discrim belongs to. It should be equal to TrapReceiverAddr. NOTE: Changing trapDiscrimReceiverAddr FROM default value to anything else is equivalent of 'creating' of a new entry. Changing trapReceiverAddr TO default value will result in deletion of that entry." ::= { trapDiscrimEntry 2 } trapDiscrimAvailabilityStatus OBJECT-TYPE SYNTAX INTEGER { offDuty(5), available(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects the current Availability status of the Discrim (based on ISO/IEC 10164-2)." ::= { trapDiscrimEntry 3 } trapDiscrimWeeklyMask OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents weekly scedule for corresponding Discrim. The WeeklyMask consists of 7 numeric characters (1 for each day of the week). Each numeric character can take a value of either '1' - enabled or '2' - disabled. For example, with WeeklyMask='1122221', an agent will apply corresponding Discriminator only on Mondays, Tuesdays and Sundays. Any characters other than '1' and '2' will be ignored." ::= { trapDiscrimEntry 4 } trapDiscrimDailyStartTime OBJECT-TYPE SYNTAX INTEGER (0..1439) MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents daily start time for corresponding Discrim. The StartTime is expressed as an offset (in minutes) from 2400 hours military time. For example, StartTime=70 represents start time of 1:10 AM." ::= { trapDiscrimEntry 5 } trapDiscrimDailyStopTime OBJECT-TYPE SYNTAX INTEGER (0..1439) MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents daily stop time for corresponding Discrim. The StopTime is expressed as an offset (in minutes) from 2400 hours military time. For example, StopTime=70 represents stop time of 1:10 AM." ::= { trapDiscrimEntry 6 } trapSeverityDiscrim OBJECT-TYPE SYNTAX INTEGER { indeterminate(2), warning(3), minor(4), major(5), critical(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The severity threshold of traps to be send to the manager. Only traps of equal or greater severity than this value are sent to the manager." ::= { trapDiscrimEntry 7 } trapDiscrimOperationalState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The current Operational State of the Discriminator. " DEFVAL { disabled } ::= { trapDiscrimEntry 8 } trapDiscrimConfigChangeCntl OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable turns reporting of configuration changes on or off. " DEFVAL { on } ::= { trapDiscrimEntry 9 } END