ARRIS-D5-VIDEO-IP-BUNDLE-MIB DEFINITIONS ::= BEGIN

IMPORTS
        arrisD5UEQam
            FROM ARRIS-MIB
        MODULE-IDENTITY,
        OBJECT-TYPE,
        Unsigned32
                FROM SNMPv2-SMI
        RowStatus,
        TruthValue
                FROM SNMPv2-TC
        InterfaceIndex
                FROM IF-MIB;


    arrisD5UEQamIpBundleMib MODULE-IDENTITY
		LAST-UPDATED "201005270000Z" -- 27th MAY 2010
		ORGANIZATION "Arris Group"
		CONTACT-INFO
				"       Software Development
						Postal: ARRIS Group
										3871 Lakefield Drive
										Suwanee, GA 30024
										USA
						Tel:    800-469-6569
						Fax:    678-473-8770"

		DESCRIPTION
				"This MIB manages the ip-bundles on the
				 ARRIS D5 product"
		::= { arrisD5UEQam 16 }

    d5UEQamIpBundlePolicy OBJECT-TYPE
        SYNTAX       INTEGER { 
                        revertive(1),
                        nonrevertive(2)
                    }
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
            "Configure the ip bundle policy to be revertive or non-revertive."
        ::= { arrisD5UEQamIpBundleMib 1 }

    d5UEQamIpBundlePolicyRevertiveTimeout OBJECT-TYPE
        SYNTAX       Unsigned32
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
            "Configure the ip bundle policy to be revertive timeout interval in seconds.
             Setting this object to non zero will also turn on the revertive policy.
             Setting this to a zero value will not turn off revertive policy if on."
        ::= { arrisD5UEQamIpBundleMib 2 }

    d5UEQamIpBundleRevertTo OBJECT-TYPE
        SYNTAX       INTEGER { 
                        none(0),
                        gig1(1),
                        gig2(2),
                        gig3(3),
                        gig4(4)
                    }
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
            "Control for administratively reverting to the backup port from the 
             primary port identified by the ifIndex."
        ::= { arrisD5UEQamIpBundleMib 3 }

    d5UEQamIpBundleRevertFrom OBJECT-TYPE
        SYNTAX       INTEGER { 
                        none(0),
                        gig1(1),
                        gig2(2),
                        gig3(3),
                        gig4(4)
                    }
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
            "Control for administratively reverting from the backup port to the 
             primary port identified by the ifIndex."
        ::= { arrisD5UEQamIpBundleMib 4 }

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --    
-- IP-BUNDLE TABLE
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
    d5UEQamIpBundleTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF D5UEQamIpBundleEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Arris UEQ Proprietry Ip Bundle Table"
        ::= { arrisD5UEQamIpBundleMib 5 }
    
    d5UEQamIpBundleEntry OBJECT-TYPE
        SYNTAX      D5UEQamIpBundleEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A row in the d5UEQamIpBundleTable.
            An entry in this table exists for each gigabit
		    port that is backed up by another gigabit port" 
        INDEX {d5UEQamIpBundlePrimaryPort}
        ::= { d5UEQamIpBundleTable 1 }
    
    D5UEQamIpBundleEntry ::= SEQUENCE {
		d5UEQamIpBundlePrimaryPort                  INTEGER,
		d5UEQamIpBundleBackUpPort                   INTEGER,
		d5UEQamIpBundlePrimaryFailedOver            TruthValue,
		d5UEQamIpBundlePrimaryLinkUp                TruthValue,
		d5UEQamIpBundleBackupLinkUp                 TruthValue,
        d5UEQamIpBundleStatus                       RowStatus
    }

    d5UEQamIpBundlePrimaryPort OBJECT-TYPE
        SYNTAX       INTEGER { 
                        gig1(1),
                        gig2(2),
                        gig3(3),
                        gig4(4)
                    }
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
            "ifIndex of a primary port in the ip bundle"
        ::= { d5UEQamIpBundleEntry 1 }

    d5UEQamIpBundleBackUpPort OBJECT-TYPE
        SYNTAX       INTEGER { 
                        gig1(1),
                        gig2(2),
                        gig3(3),
                        gig4(4),
                        fe1(5)
                    }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION
            "ifIndex of the backup port in the ip bundle"
        ::= { d5UEQamIpBundleEntry 2 }

    d5UEQamIpBundlePrimaryFailedOver OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION 
	        "states if the primary port is currently being backed up
             by the backup port"
        ::= { d5UEQamIpBundleEntry 3 }

    d5UEQamIpBundlePrimaryLinkUp OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION 
	        "states if the primary port's line protocol is currently up"
        ::= { d5UEQamIpBundleEntry 4 }

    d5UEQamIpBundleBackupLinkUp OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION 
	        "states if the primary port's line protocol is currently up"
        ::= { d5UEQamIpBundleEntry 5 }

    d5UEQamIpBundleStatus OBJECT-TYPE
        SYNTAX RowStatus
        MAX-ACCESS	read-create
        STATUS	current
        DESCRIPTION
            "Controls and reflects the status of rows in this table." 
        ::= { d5UEQamIpBundleEntry 6 }



END