ARRIS-D5-VIDEO-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32, Gauge32, IpAddress FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue, RowStatus, DisplayString, TimeStamp, DateAndTime FROM SNMPv2-TC OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF ifIndex, InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB arrisD5UEQam FROM ARRIS-MIB; d5MpegVideoMIB MODULE-IDENTITY LAST-UPDATED "201001050000Z" -- 4th January 2010 ORGANIZATION "Arris International" CONTACT-INFO " Network Management Postal: Arris International. 4300 Cork Airport Business Park Cork Airport, Kinsale Road Cork, Ireland. Tel: +353 21 7305 800 Fax: +353 21 4321 972" DESCRIPTION "This MIB manages the MPEG / VIDEO software on the Arris CMTS." ::= { arrisD5UEQam 1 } d5VideoObjects OBJECT IDENTIFIER ::= { d5MpegVideoMIB 1 } D5TransportStreamIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An identifier that uniquely identifies an MPEG Transport Stream in the D5 MPEG Manager. This could represent an incoming or outgoing TS, or could represent an SPTS or MPTS." SYNTAX INTEGER ( 1..65535 ) D5ElementaryStreamType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A convenient type definition for MPEG Elementary Stream Type values." SYNTAX INTEGER ( 1..255 ) D5DescriptorTag ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A convenient type definition for MPEG Descriptor Tags values." SYNTAX INTEGER ( 1..255 ) D5DescriptorIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An identifier that uniquely identifies an MPEG Descriptor within a given Program or Elementary Stream." SYNTAX INTEGER ( 1..65535 ) D5DescriptorBuffer ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A buffer that contains MPEG Descriptor data." SYNTAX OCTET STRING (SIZE (0..255)) D5PID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A convenient type definition for MPEG PID values." SYNTAX INTEGER ( 0..8192 ) D5Program ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A convenient type definition for MPEG Program Number values." SYNTAX Unsigned32 D5MappingType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A convenient type definition for mapping rules. These can be as follows static - configured by the operator to over-ride the default mapping dynamic - allocated by Q5 on the fly and currently in operation default - representing the default rule but not in operation." SYNTAX INTEGER { default(1), dynamic(2), static(3) } D5PidType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A convenient type definition for PID - whether PSI or ES." SYNTAX INTEGER { es(1), psi(2), ghost(3) } D5ProgType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A convenient type definition for Programs - whether PSI or ES." SYNTAX INTEGER { es(1), psi(2) } D5RemappingRuleSourceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A convenient type definition for the source of rule used to create a dynamic PID/PROG remapping qam - A Qam remap rule was used to create the remapping udpIp - A Udp/IP rule was used to create the remapping nsg - Remapping was made by NSG mode default rules passThrough - Remapping was made by passThrough mode default rules default - Remapping was made by arris mode default rules" SYNTAX INTEGER { qam(1), udpIp(2), nsg(3), passThrough(4), default(5) } D5TransportStreamStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A convenient type definition for MPEG transport stream status states. These can be as follows active - currently passing video traffic timedOut - No video passing currently, in transition from active to inactive states inactive - not passing ANY traffic - used for statically configured streams" SYNTAX INTEGER { active(1), timingOut(2), inactive(3) } D5PidStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A convenient type definition for MPEG PID status states. These can be as follows active - currently passing video traffic timedOut - No video passing currently, in transition from active to inactive states inactive - not passing ANY traffic - used for statically configured PIDs" SYNTAX INTEGER { active(1), timingOut(2), inactive(3) } D5ProgStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A convenient type definition for MPEG Program status states. These can be as follows active - currently passing video traffic timedOut - No video passing currently, in transition from active to inactive states inactive - not passing ANY traffic - used for statically configured programs" SYNTAX INTEGER { active(1), timingOut(2), inactive(3) } D5TransportStreamDirection ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A convenient type definition for the direction of a Transport Stream incoming - the Transport Stream is being received by the D5, typically over IP outgoing - the Transport Stream is being generated by the D5 and sent to a QAM." SYNTAX INTEGER { incoming(1), outgoing(2) } D5VideoChannelContainerNameType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A unique name that identifies a particular channel-container." SYNTAX DisplayString (SIZE (0..16)) D5VideoDefaultMappingScheme ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A convenient type definition for the default-mappings that are supported by the D5. The default-mapping schemes are used to identify which QAM to map an input TS to, where the TS has no static configuration associated with it. udpPortLegacy - The earlier version of the Arris default UDP- port mapping scheme may used to map a TS to an output QAM channel. Each QAM channel has a pre-defined associated range of UDP-ports which map to specific program-numbers on that QAM channel. udpPort - The Arris default UDP-port mapping scheme is used to map a TS to an output QAM channel. Each QAM channel has a pre-defined associated range of UDP- ports which map to specific program-numbers on that QAM channel. disabled - The default mapping schemes are disabled. Only video streams that are statically configured can pass through the D5." SYNTAX INTEGER { disabled(1), udpPort(2), udpPortLegacy(3) } D5PersistenceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A convenient type definition that defines whether or not a rule should be saved persistently across system reboots." SYNTAX INTEGER { nonVolatile(0), volatile(1) } D5VideoQamLogQamState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Defines the status of the log entry: one-shot Log entry describes a one off event (no START/STOP attributes) active Log entry is currently active. This means that the START event has occured and the STOP event is pending complete Both the START and STOP events for this log entry have fired" SYNTAX INTEGER { one-shot(1), active(2), complete(3) } D5VideoProgramOverSubscriptionAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Defines the status of the log entry: none No action is performed, program monitoring is not enabled. notification An event is logged indicating that the program has exceeded it's bandwidth. recover Action will be taken to recover the bandwidth in questions. Typically the program will be removed." SYNTAX INTEGER { none(0), notification(1), recover(2) } D5GeneratePat ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Defines the controls on the PAT generation: enable-auto Enable the auto-generation of the PAT table disable Disable to local generation of the PAT table force-nit-entry Enable the auto-generation of the PAT table but force the NIT entry (i.e. program_number '0') to the value specified by the 'nit-pid' configuration. This is used for video-si streams, where the egress NIT PID defaults to that specified in the ingress PAT." SYNTAX INTEGER { enable-auto(1), disable(2), force-nit-entry(3) } -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Global MPEG Processing configuration settings including defaults for qams -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- d5VideoControlGroup OBJECT IDENTIFIER ::= { d5VideoObjects 1 } d5vControlPatInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Retransmission interval for PAT tables in milliseconds." ::= { d5VideoControlGroup 1 } d5vControlPmtInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Retransmission interval for PMT tables in milliseconds." ::= { d5VideoControlGroup 2 } d5vControlNitInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Retransmission interval for NIT tables in milliseconds." ::= { d5VideoControlGroup 3 } d5vControlSdtInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Retransmission interval for SDT tables in milliseconds." ::= { d5VideoControlGroup 4 } d5vControlOriginalNetworkId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "DVB original-network-id to be used in downstream ." ::= { d5VideoControlGroup 5 } d5vControlNetworkId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "DVB network-id to be used in downstream ." ::= { d5VideoControlGroup 6 } d5vControlNetworkName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "DVB network-name to be used in downstream ." ::= { d5VideoControlGroup 7 } d5vControlTimeoutInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timeout interval for incoming streams in milliseconds." ::= { d5VideoControlGroup 8 } d5vControlNitPID OBJECT-TYPE SYNTAX D5PID MAX-ACCESS read-write STATUS current DESCRIPTION "PID value to use when generating NIT tables." ::= { d5VideoControlGroup 9 } d5vControlAutoGeneratePAT OBJECT-TYPE SYNTAX D5GeneratePat MAX-ACCESS read-write STATUS current DESCRIPTION "Flag specifying whether or not the auto-generation by the D5 of PAT tables is enabled" ::= { d5VideoControlGroup 10 } d5vControlAutoGenerateCAT OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag specifying whether or not the auto-generation by the D5 of CAT tables is enabled" ::= { d5VideoControlGroup 11 } d5vControlAutoGeneratePMT OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag specifying whether or not the auto-generation by the D5 of PMT tables is enabled" ::= { d5VideoControlGroup 12 } d5vControlAutoGenerateNIT OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag specifying whether or not the auto-generation by the D5 of NIT tables is enabled(and the associated entry in the PAT table for the NIT-PID)" ::= { d5VideoControlGroup 13 } d5vControlAutoGenerateSDT OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag specifying whether or not the auto-generation by the D5 of SDT tables is enabled" ::= { d5VideoControlGroup 14 } d5vControlAutoGenerateTDT OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag specifying whether or not the auto-generation by the D5 of TDT tables is enabled" ::= { d5VideoControlGroup 15 } d5vControlAutoGenerateTOT OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag specifying whether or not the auto-generation by the D5 of TOT tables is enabled" ::= { d5VideoControlGroup 16 } d5vControlPassThroughType OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), mpts(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This can be used to disable the default Arris prog/pid remapping scheme, and use pass-through remapping instead. Can also be used to enable MPTS-pass-through mode. " ::= { d5VideoControlGroup 17 } d5vControlCatInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Retransmission interval for CAT tables in milliseconds." ::= { d5VideoControlGroup 18 } d5vControlMaxProgramsPerQamChannel OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of programs allowed on a Qam channel at any one time.(Some QAM H/W may restrict to 31) " ::= { d5VideoControlGroup 19 } d5vControlAllowEsDvbPids OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag that determines whether or not DVB-reserved PIDS are allowed to be used for elementary-streams." ::= { d5VideoControlGroup 20 } d5vControlDefaultMappingScheme OBJECT-TYPE SYNTAX D5VideoDefaultMappingScheme MAX-ACCESS read-write STATUS current DESCRIPTION "The mapping scheme to be used for input transport-streams that have no associated static-configuration." ::= { d5VideoControlGroup 21 } d5vControlFastPsiTableUpdates OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this is set to TRUE, then PSI table updates are sent down the RF as soon as the new PSI table has been calculated. Otherwise, PSI table updates are made in such a way that the repetition interval for that table on the RF remains constant." ::= { d5VideoControlGroup 22 } d5vControlCycleOutputPids OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this is set to TRUE, then the D5 cycles through the pool of unused PIDs when creating new PID remappings. The purpose of this is to limit the amound of PID reusage E.g. if a set-top using a buffered PMT table to view a program where the program may have been deleted and the PIDs may be in use by a different program now." ::= { d5VideoControlGroup 23 } d5vControlOverSubscriptionSafetyMargin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of bandwidth in Kbps for the D5 to maintain as unused bandwidth on each QAM. Purpose of this being to help prevent over-subscription from occuring at the cost of some wasted bandwidth." ::= { d5VideoControlGroup 24 } d5vControlOverSubscriptionRecoveryEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this is set to TRUE, then the D5 will attempt to recover automatically from a QAM-overscribed condition by shutting down active programs selectively. It selects which programs to shut down by order of most recently activated, checks the new bitrates, then continues to shutdown more programs as neccessary untill the total bandwidth fits within the QAM available bandwidth." ::= { d5VideoControlGroup 25 } d5vControlFilterCaDescMode OBJECT-TYPE SYNTAX INTEGER { cat-and-pmt(1), neither(2), cat-only(3), pmt-only(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "If this is configured, then the D5 will remove CA_Descriptors from incoming streams. This includes descriptors in CAT and PMT tables, and in the case of PMT it includes the 1st and 2nd loop. This is set to 'neither' by default." ::= { d5VideoControlGroup 26 } d5vControlAllowTsidDuplication OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this is set to TRUE, then the D5 chassis can be configured with identical TSIDs on multiple QAM channels . Duplicate TSIDs should be used with some caution because the use of such is not currently compatible with conditional-access encryption, channel-container replication, or PSIG generation. This is set to FALSE by default. " ::= { d5VideoControlGroup 27 } d5vControlPcrDriftCorrection OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "If this is set to TRUE, then PCR drift correction of input MPEG streams is enabled on the resultant output stream. Otherwise, the functionality is disabled." ::= { d5VideoControlGroup 28 } d5vControlProgramOverSubscription OBJECT-TYPE SYNTAX D5VideoProgramOverSubscriptionAction MAX-ACCESS read-write STATUS current DESCRIPTION "If this is set to TRUE, then the D5 will attempt to recover automatically from a QAM-overscribed condition by shutting down active programs selectively. It selects which programs to shut down by order of most recently activated, checks the new bitrates, then continues to shutdown more programs as neccessary untill the total bandwidth fits within the QAM available bandwidth." ::= { d5VideoControlGroup 29 } d5vControlProgramOverSubscriptionPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The period of time in seconds over which bandwidth is monitored before an over-subscription action is triggered." ::= { d5VideoControlGroup 30 } d5vControlProgramOverSubscriptionThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of bandwidth in percent by which a program stream may exceed it's configured limit before triggering the action specified by d5vControlProgramOverSubscription." ::= { d5VideoControlGroup 31 } d5vControlPreEncDetect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this is set to TRUE, then the D5 will detect Motorola pre-encrypted streams, and will avoid re-encrypting the traffic when forwarding it downstream. If set to TRUE, the d5vControlFilterCaDesc setting is ignored for any pre-encrypted streams that match this rule, because the stream could not otherwise be decrypted." ::= { d5VideoControlGroup 32 } d5vControlUtilPercentThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage utilization threshold of the QAM bandwidth at which the D5 will generate an alarm. The purpose of this is to facilitate monitoring of QAM bandwidth where the QAM might not necessarily be oversubscribed. " ::= { d5VideoControlGroup 33 } d5vControlDefaultPidMappingProgramStart OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The starting program-number to map to the start of the default mapping pid range. " ::= { d5VideoControlGroup 34 } d5vControlDefaultPidMappingProgramCount OBJECT-TYPE SYNTAX Unsigned32 (1..2048) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of programs to use for the default pid range. " ::= { d5VideoControlGroup 35 } d5vControlDefaultPidMappingPidCount OBJECT-TYPE SYNTAX Unsigned32 (2..31) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of PIDs to use per-program. Determines the PID offset for each program number in the default range. There is a legal limit of 4096 on the values of d5vControlDefaultPidMappingProgramCount multiplied by d5vControlDefaultPidMappingPidCount. " ::= { d5VideoControlGroup 36 } d5vControlOnProgramConflictDisconnectOlderStream OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled, program conflicts trigger the older of the two streams to be disconnected. I.E. the newer stream takes the program number. NOTE: this only affects streams which have the same destination udp&IP values, and differ by source-IP. " ::= { d5VideoControlGroup 37 } d5vControlPcrDriftCorrectionGain OBJECT-TYPE SYNTAX Unsigned32(0..10000) UNITS "1/10000" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Gain-control used in PCR-drift calculation. In units of 1/10000." ::= { d5VideoControlGroup 38 } d5vControlPcrDriftCorrectionUpperThreshold OBJECT-TYPE SYNTAX Unsigned32(0..10000) UNITS "1/10 milliseconds" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Upper-threshold used in PCR-drift calculation. In units of tenths of milliseconds." ::= { d5VideoControlGroup 39 } d5vControlPcrDriftCorrectionLowerThreshold OBJECT-TYPE SYNTAX Unsigned32(0..1000) UNITS "1/10 milliseconds" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Lower-threshold used in PCR-drift calculation. In units of tenths of milliseconds." ::= { d5VideoControlGroup 40 } d5vControlNullDroppingRate OBJECT-TYPE SYNTAX Unsigned32(0..7500) UNITS "Kbps" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The rate used when performing NULL packet dropping. In units of Kbps - setting will be rounded up to the nearest 150 Kbps multiple" ::= { d5VideoControlGroup 41 } -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- QAM table (root of outgoing transport-streams in the MIB) -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- d5VideoQamStreamTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoQamStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores MPEG Video related data on a per QAM channel basis. Ultimately this table will AUGMENT that supported by the QAM RF Manager but for the moment it is standalone but using the same index, ifIndex" ::= { d5VideoObjects 2 } d5VideoQamStreamEntry OBJECT-TYPE SYNTAX D5VideoQamStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex } ::= { d5VideoQamStreamTable 1 } D5VideoQamStreamEntry ::= SEQUENCE { d5vQamNitPID D5PID, d5vQamTransportStreamID Unsigned32, d5vQamTsMibIndex D5TransportStreamIndex, d5vQamTotalPatsTx Counter32, d5vQamTotalProgramsTx Counter32, d5vQamCurrentProgramsTx Gauge32, d5vQamPatInterval Unsigned32, d5vQamPmtInterval Unsigned32, d5vQamNitInterval Unsigned32, d5vQamSdtInterval Unsigned32, d5vQamOriginalNetworkId Unsigned32, d5vQamNetworkId Unsigned32, d5vQamNetworkName DisplayString, d5vQamPassThroughType INTEGER, d5vQamConfVideoSiStreamEnabled TruthValue, d5vQamConfVideoSiStreamUdpDest Unsigned32, d5vQamConfVideoSiStreamIpSrc IpAddress, d5vQamConfVideoSiStreamIpDest IpAddress, d5vQamActiveVideoSiStreamEnabled TruthValue, d5vQamActiveVideoSiStreamUdpDest Unsigned32, d5vQamActiveVideoSiStreamIpSrc IpAddress, d5vQamActiveVideoSiStreamIpDest IpAddress, d5vQamStreamStatus D5TransportStreamStatus, d5vQamTimeActivated TimeStamp, d5vQamTimeActive Counter32, d5vQamTimeDeactivated TimeStamp, d5vQamAutoGeneratePAT D5GeneratePat, d5vQamAutoGenerateCAT TruthValue, d5vQamAutoGeneratePMT TruthValue, d5vQamAutoGenerateNIT TruthValue, d5vQamAutoGenerateSDT TruthValue, d5vQamAutoGenerateTDT TruthValue, d5vQamAutoGenerateTOT TruthValue, d5vQamCatInterval Unsigned32, d5vQamMaxProgramsPerQamChannel Unsigned32, d5vQamAllowEsDvbPids TruthValue, d5vQamDefaultMappingScheme D5VideoDefaultMappingScheme, d5vQamFastPsiTableUpdates TruthValue, d5vQamCycleOutputPids TruthValue, d5vQamOverSubscribed TruthValue, d5vQamOverSubscriptionSafetyMargin Unsigned32, d5vQamOverSubscriptionRecoveryEnabled TruthValue, d5vQamFilterCaDescMode INTEGER, d5vQamPcrDriftCorrection TruthValue, d5vQamPreEncDetect TruthValue, d5vQamUtilPercentThresh Unsigned32, d5vQamOnProgramConflictDisconnectOlderStream TruthValue, d5vQamNullDroppingRate Unsigned32, d5vQamConfVideoSiStreamTsidRemap TruthValue } d5vQamNitPID OBJECT-TYPE SYNTAX D5PID MAX-ACCESS read-write STATUS current DESCRIPTION "The PID value to us when generating NIT tables on this QAM channel. The default value is 16, the DVB requirement" DEFVAL { 16 } ::= { d5VideoQamStreamEntry 1 } d5vQamTransportStreamID OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The MPEG transport_stream_id used when transmitting PAT tables on this QAM channel. The default value is specific to the slot number where the QAM channel is located." ::= { d5VideoQamStreamEntry 2 } d5vQamTsMibIndex OBJECT-TYPE SYNTAX D5TransportStreamIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the outgoing Transport Stream on this QAM channel. A value of 0 means there are no MPEG Programs being transmitted at present, so there will be no related entry in the d5vTransportStreamTable." ::= { d5VideoQamStreamEntry 3 } d5vQamTotalPatsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of unique PAT Tables that have been generated for this QAM channel." ::= { d5VideoQamStreamEntry 4 } d5vQamTotalProgramsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated number of Programs transmitted on this QAM channel." ::= { d5VideoQamStreamEntry 5 } d5vQamCurrentProgramsTx OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Programs currently being transmitted on this QAM channel." ::= { d5VideoQamStreamEntry 6 } d5vQamPatInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Retransmission interval for PAT tables in milliseconds." ::= { d5VideoQamStreamEntry 7 } d5vQamPmtInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Retransmission interval for PMT tables in milliseconds." ::= { d5VideoQamStreamEntry 8 } d5vQamNitInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Retransmission interval for NIT tables in milliseconds." ::= { d5VideoQamStreamEntry 9 } d5vQamSdtInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Retransmission interval for SDT tables in milliseconds." ::= { d5VideoQamStreamEntry 10 } d5vQamOriginalNetworkId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "DVB original-network-id to be used in downstream ." ::= { d5VideoQamStreamEntry 11 } d5vQamNetworkId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "DVB network-id to be used in downstream ." ::= { d5VideoQamStreamEntry 12 } d5vQamNetworkName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "DVB network-name to be used in downstream ." ::= { d5VideoQamStreamEntry 13 } d5vQamPassThroughType OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), mpts(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This can be used to disable the default Arris prog/pid remapping scheme, and use pass-through remapping instead. Can also be used to enable MPTS-pass-through mode. " ::= { d5VideoQamStreamEntry 14 } d5vQamConfVideoSiStreamEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to enable/disable video-si-stream configuration. At least one of UDP/src-IP/dest-IP must be non-zero for this video-si-stream rule to be functional." ::= { d5VideoQamStreamEntry 15 } d5vQamConfVideoSiStreamUdpDest OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Video-si-stream UDP destination port.(A value of 0 in a rule means that the udp-port can be ANY value for pattern-matching)" ::= { d5VideoQamStreamEntry 16 } d5vQamConfVideoSiStreamIpSrc OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Video-si-stream IP source address.(A value of 0 in a rule means that the src-IP can be ANY value for pattern-matching)" ::= { d5VideoQamStreamEntry 17 } d5vQamConfVideoSiStreamIpDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Video-si-stream IP destination address.(A value of 0 in a rule means that the dest-IP can be ANY value for pattern-matching)" ::= { d5VideoQamStreamEntry 18 } d5vQamActiveVideoSiStreamEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Used to indicate if the QAM is currently passing a video-si-stream." ::= { d5VideoQamStreamEntry 19 } d5vQamActiveVideoSiStreamUdpDest OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Active video-si-stream UDP destination port." ::= { d5VideoQamStreamEntry 20 } d5vQamActiveVideoSiStreamIpSrc OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Active video-si-stream IP source address." ::= { d5VideoQamStreamEntry 21 } d5vQamActiveVideoSiStreamIpDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Active video-si-stream IP destination address." ::= { d5VideoQamStreamEntry 22 } d5vQamStreamStatus OBJECT-TYPE SYNTAX D5TransportStreamStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of this QAM Transport stream" ::= { d5VideoQamStreamEntry 23 } d5vQamTimeActivated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this stream was last activated. Zero if not-applicable." ::= { d5VideoQamStreamEntry 24 } d5vQamTimeActive OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The total time that MPEG stream has been active." ::= { d5VideoQamStreamEntry 25 } d5vQamTimeDeactivated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this stream was last deactivated. Zero if not-known." ::= { d5VideoQamStreamEntry 26 } d5vQamAutoGeneratePAT OBJECT-TYPE SYNTAX D5GeneratePat MAX-ACCESS read-write STATUS current DESCRIPTION "Flag specifying whether or not the auto-generation by the D5 of PAT tables is enabled" ::= { d5VideoQamStreamEntry 27 } d5vQamAutoGenerateCAT OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag specifying whether or not the auto-generation by the D5 of CAT tables is enabled" ::= { d5VideoQamStreamEntry 28 } d5vQamAutoGeneratePMT OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag specifying whether or not the auto-generation by the D5 of PMT tables is enabled" ::= { d5VideoQamStreamEntry 29 } d5vQamAutoGenerateNIT OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag specifying whether or not the auto-generation by the D5 of NIT tables is enabled(and the associated entry in the PAT table for the NIT-PID)" ::= { d5VideoQamStreamEntry 30 } d5vQamAutoGenerateSDT OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag specifying whether or not the auto-generation by the D5 of SDT tables is enabled" ::= { d5VideoQamStreamEntry 31 } d5vQamAutoGenerateTDT OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag specifying whether or not the auto-generation by the D5 of TDT tables is enabled" ::= { d5VideoQamStreamEntry 32 } d5vQamAutoGenerateTOT OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag specifying whether or not the auto-generation by the D5 of TOT tables is enabled" ::= { d5VideoQamStreamEntry 33 } d5vQamCatInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Retransmission interval for CAT tables in milliseconds." ::= { d5VideoQamStreamEntry 34 } d5vQamMaxProgramsPerQamChannel OBJECT-TYPE SYNTAX Unsigned32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of programs allowed on a Qam channel at any one time.(Some QAM H/W may restrict to 31) " ::= { d5VideoQamStreamEntry 35 } d5vQamAllowEsDvbPids OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flag that determines whether or not DVB-reserved PIDS are allowed to be used for elementary-streams." ::= { d5VideoQamStreamEntry 36 } d5vQamDefaultMappingScheme OBJECT-TYPE SYNTAX D5VideoDefaultMappingScheme MAX-ACCESS read-write STATUS current DESCRIPTION "The mapping scheme to be used for input transport-streams that have no associated static-configuration. NOTE: the udpPortLegacy scheme cannot be configured against an individual QAM-channel. If so desired, it may be turned on globally in the d5vControlDefaultMappingScheme MIB entry. " ::= { d5VideoQamStreamEntry 37 } d5vQamFastPsiTableUpdates OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this is set to TRUE, then PSI table updates are sent down the RF as soon as the new PSI table has been calculated. Otherwise, PSI table updates are made in such a way that the repetition interval for that table on the RF remains constant. (Set to FALSE by default)" ::= { d5VideoQamStreamEntry 38 } d5vQamCycleOutputPids OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this is set to TRUE, then the D5 cycles through the pool of unused PIDs when creating new PID remappings. The purpose of this is to limit the amound of PID reusage E.g. if a set-top using a buffered PMT table to view a program where the program may have been deleted and the PIDs may be in use by a different program now. (Set to FALSE by default )" ::= { d5VideoQamStreamEntry 39 } d5vQamOverSubscribed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the bandwidth of this QAM is currently over-subscribed. If the QAM is currently over-subscribed, some programs will suffer packet-loss. The affected programs are identified in the d5QamProgramPcrBufferTable." ::= { d5VideoQamStreamEntry 40 } d5vQamOverSubscriptionSafetyMargin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of bandwidth in Kbps for the D5 to maintain as unused bandwidth on each QAM. Purpose of this being to help prevent over-subscription from occuring at the cost of some wasted bandwidth." ::= { d5VideoQamStreamEntry 41 } d5vQamOverSubscriptionRecoveryEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this is set to TRUE, then the D5 will attempt to recover automatically from a QAM-overscribed condition by shutting down active programs selectively. It selects which programs to shut down by order of most recently activated, checks the new bitrates, then continues to shutdown more programs as neccessary untill the total bandwidth fits within the QAM available bandwidth." ::= { d5VideoQamStreamEntry 42 } d5vQamFilterCaDescMode OBJECT-TYPE SYNTAX INTEGER { cat-and-pmt(1), neither(2), cat-only(3), pmt-only(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "If this is configured, then the D5 will remove CA_Descriptors from incoming streams destined for this QAM. This includes descriptors in CAT and PMT tables, and in the case of PMT includes the 1st and 2nd loop. This is set to 'neither' by default." ::= { d5VideoQamStreamEntry 43 } d5vQamPcrDriftCorrection OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "If this is set to TRUE, then PCR drift correction of input MPEG streams is enabled on the resultant output stream. Otherwise, the functionality is disabled." ::= { d5VideoQamStreamEntry 44 } d5vQamPreEncDetect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If this is set to TRUE, then the D5 will detect Motorola pre-encrypted streams, and will avoid re-encrypting the traffic when forwarding it downstream. If set to TRUE, the d5vControlFilterCaDesc setting is ignored for any pre-encrypted streams that match this rule, because the stream could not otherwise be decrypted." ::= { d5VideoQamStreamEntry 45 } d5vQamUtilPercentThresh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The percentage utilization threshold of the QAM bandwidth at which the D5 will generate an alarm. The purpose of this is to facilitate monitoring of QAM bandwidth where the QAM might not necessarily be oversubscribed. " ::= { d5VideoQamStreamEntry 46 } d5vQamOnProgramConflictDisconnectOlderStream OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled, program conflicts trigger the older of the two streams to be disconnected. I.E. the newer stream takes the program number. NOTE: this only affects streams which have the same destination udp&IP values, and differ by source-IP. " ::= { d5VideoQamStreamEntry 47 } d5vQamNullDroppingRate OBJECT-TYPE SYNTAX Unsigned32(0..7500) UNITS "Kbps" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The rate used when performing NULL packet dropping. In units of Kbps - setting will be rounded up to the nearest 150 Kbps multiple" ::= { d5VideoQamStreamEntry 48 } d5vQamConfVideoSiStreamTsidRemap OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The default behaviour of video-si streams is not to remap the ingress Transport_Stream_id so that the TS_ID in the PAT matches the value in the other SI tables. Enabling this parameter, overrides the default behaviour and remaps the TS_ID in the PAT to the value configured on the QAM channel. NOTE: this only affects streams which are configured as video-si-stream. " ::= { d5VideoQamStreamEntry 49 } -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- UDP/IP table (root of incoming transport-streams in the MIB) -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- d5VideoUdpIpStreamTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoUdpIpStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table displays the current incoming Transport Streams and can be configured with specific rules to override the default Program Number mappings. This table has a higher precedence than the d5VideoUdpPortPnTable. If the IP Address associated with an incoming TS matches a configured entry in this table then the associated mapping will apply, otherwise the default mapping from d5vUdpPortPnTable will apply and an dynamic entry will be created in this table. Active entries contain a reference to either a specific QAM or a specific channel-container. When a stream is treated as a virtual-program, the d5vIpActiveChanContName field is set to indicate which channel-container this stream is being mapped to. For any individual active entry in this table, either d5vIpActiveQamIfIndex or d5vIpActiveChanContName is set - not both. " ::= { d5VideoObjects 3 } d5VideoUdpIpStreamEntry OBJECT-TYPE SYNTAX D5VideoUdpIpStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vIpUdpIndex, d5vIpSrcIndex, d5vIpDestIndex } ::= { d5VideoUdpIpStreamTable 1 } D5VideoUdpIpStreamEntry ::= SEQUENCE { d5vIpUdpIndex Unsigned32, d5vIpSrcIndex IpAddress, d5vIpDestIndex IpAddress, d5vIpRowStatus RowStatus, d5vIpTsMibIndex D5TransportStreamIndex, d5vIpMappingType D5MappingType, d5vIpConfQamIfIndex InterfaceIndexOrZero, d5vIpStreamStatus D5TransportStreamStatus, d5vIpActiveQamIfIndex InterfaceIndexOrZero, d5vIpActiveChanContName D5VideoChannelContainerNameType, d5vIpTimeActivated TimeStamp, d5vIpTimeActive Counter32, d5vIpTimeDeactivated TimeStamp, d5vIpConfProgPassThroughEnabled TruthValue, d5vIpActiveProgPassThroughEnabled TruthValue, d5vIpConfPidPassThroughEnabled TruthValue, d5vIpActivePidPassThroughEnabled TruthValue, d5vIpConfRedundantMulticast TruthValue, d5vIpActiveRedundantMulticast TruthValue, d5vIpConfPersistence D5PersistenceType } d5vIpUdpIndex OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The destination UDP Port to be mapped to the specified QAM Channel and Program Number.(A value of 0 in a rule means that the udp-port can be ANY value for pattern-matching)" ::= { d5VideoUdpIpStreamEntry 1 } d5vIpSrcIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The SRC IP address of the TS to be mapped to the specified QAM Channel and Program Number.(A value of 0 in a rule means that the src-IP can be ANY value for pattern-matching )" ::= { d5VideoUdpIpStreamEntry 2 } d5vIpDestIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The DEST IP address of the TS to be mapped to the specified QAM Channel and Program Number.(A value of 0 in a rule means that the dest-IP can be ANY value for pattern-matching)" ::= { d5VideoUdpIpStreamEntry 3 } d5vIpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus for controlling entries in this table." ::= { d5VideoUdpIpStreamEntry 4 } d5vIpTsMibIndex OBJECT-TYPE SYNTAX D5TransportStreamIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the entry in the d5VideoStreamTable for corresponding to this table entry." ::= { d5VideoUdpIpStreamEntry 5 } d5vIpMappingType OBJECT-TYPE SYNTAX D5MappingType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of entry, configured or dynamic." ::= { d5VideoUdpIpStreamEntry 6 } d5vIpConfQamIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex of the QAM channel that this IP transport stream is configured to be mapped to. A value of 0 indicates that no mapping is configured." DEFVAL { 0 } ::= { d5VideoUdpIpStreamEntry 7 } d5vIpStreamStatus OBJECT-TYPE SYNTAX D5TransportStreamStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of this IP Transport stream" ::= { d5VideoUdpIpStreamEntry 8 } d5vIpActiveQamIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of the QAM channel that this stream is currently mapped to." ::= { d5VideoUdpIpStreamEntry 9 } d5vIpActiveChanContName OBJECT-TYPE SYNTAX D5VideoChannelContainerNameType MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the channel-container that this stream is currently mapped to." ::= { d5VideoUdpIpStreamEntry 10 } d5vIpTimeActivated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this stream was last activated. Zero if not-applicable." ::= { d5VideoUdpIpStreamEntry 11 } d5vIpTimeActive OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The total time that MPEG stream has been active." ::= { d5VideoUdpIpStreamEntry 12 } d5vIpTimeDeactivated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this stream was last deactivated. Zero if not-known." ::= { d5VideoUdpIpStreamEntry 13 } d5vIpConfProgPassThroughEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This can be used to configure default PROG remapping for this stream. If this is set to TRUE, input PROGs are mapped to identical output PROGs (as if pass-through mode were enabled on the QAM). " DEFVAL {FALSE} ::= { d5VideoUdpIpStreamEntry 14 } d5vIpActiveProgPassThroughEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if default PROG-remapping is currently enabled for this stream. (May differ from the value of d5vIpConfProgPassThroughEnabled where a dynamic entry is created based on static-rules). " ::= { d5VideoUdpIpStreamEntry 15 } d5vIpConfPidPassThroughEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This can be used to configure default PID remapping for this stream. If this is set to TRUE, input PIDs are mapped to identical output PIDs (as if pass-through mode were enabled on the QAM). " DEFVAL {FALSE} ::= { d5VideoUdpIpStreamEntry 16 } d5vIpActivePidPassThroughEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if default PID-remapping is currently enabled for this stream. (May differ from the value of d5vIpConfPidPassThroughEnabled where a dynamic entry is created based on static-rules). " ::= { d5VideoUdpIpStreamEntry 17 } d5vIpConfRedundantMulticast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This can be used to configure a video stream for redundancy May be set to TRUE only if the d5vIpSrcIndex is set to 0 and the d5vIpDestIndex is set to a valid multicast address and the d5vIpUdpIndex is set to a non-zero value. When this value is set to TRUE, the D5 WAN card doesn't distinguish between packets with different srcIp values, where the d5vIpUdpIndex and d5vIpDestIndex match this rule. " DEFVAL {FALSE} ::= { d5VideoUdpIpStreamEntry 18 } d5vIpActiveRedundantMulticast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates if redundant-multicast is currently enabled for this stream. (May differ from the value of d5vIpConfRedundantMulticast where a dynamic entry is created based on static-rules). " DEFVAL {FALSE} ::= { d5VideoUdpIpStreamEntry 19 } d5vIpConfPersistence OBJECT-TYPE SYNTAX D5PersistenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. This setting is only meaningful for entries that have a d5vIpMappingType of static " DEFVAL { nonVolatile } ::= { d5VideoUdpIpStreamEntry 20 } -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- MPEG Transport Streams, Programs, Elementary Streams and Descriptor Tables -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- d5VideoStreamTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores basic information on all Transport Streams in the D5. It covers both incoming and outgoing ones. The MPEG Manager automatically creates any entry in this table when it detects a new incoming TS or begins to generate a new outgoing TS." ::= { d5VideoObjects 4 } d5VideoStreamEntry OBJECT-TYPE SYNTAX D5VideoStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vStreamDirectionIndex, d5vStreamTsMibIndex} ::= { d5VideoStreamTable 1 } D5VideoStreamEntry ::= SEQUENCE { d5vStreamDirectionIndex D5TransportStreamDirection, d5vStreamTsMibIndex D5TransportStreamIndex, d5vStreamPatVersion Unsigned32, d5vStreamTsID Unsigned32, d5vStreamProgramCount Gauge32, d5vStreamPatCurrTimeCreated TimeStamp, d5vStreamPatCurrTimeActive Counter32, d5vStreamPatPrevTimeCreated TimeStamp, d5vStreamCatVersion Unsigned32, d5vStreamCatCurrTimeCreated TimeStamp, d5vStreamCatCurrTimeActive Counter32, d5vStreamCatPrevTimeCreated TimeStamp } d5vStreamDirectionIndex OBJECT-TYPE SYNTAX D5TransportStreamDirection MAX-ACCESS read-only STATUS current DESCRIPTION "The direction of this Transport Stream." ::= { d5VideoStreamEntry 1 } d5vStreamTsMibIndex OBJECT-TYPE SYNTAX D5TransportStreamIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index that identifies the Transport Stream within the D5." ::= { d5VideoStreamEntry 2 } d5vStreamPatVersion OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The version number of the current PAT Table for this Transport Stream." ::= { d5VideoStreamEntry 3 } d5vStreamTsID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The MPEG transport_stream_id in the PAT tables on this Transport Stream." ::= { d5VideoStreamEntry 4 } d5vStreamProgramCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Programs currently in this Transport Stream." ::= { d5VideoStreamEntry 5 } d5vStreamPatCurrTimeCreated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the current PAT was created. Zero if not-applicable." ::= { d5VideoStreamEntry 6 } d5vStreamPatCurrTimeActive OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The total time the current PAT has been active." ::= { d5VideoStreamEntry 7 } d5vStreamPatPrevTimeCreated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the predecessor of this PAT was created. Zero if not-known." ::= { d5VideoStreamEntry 8 } d5vStreamCatVersion OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The version number of the current CAT Table for this Transport Stream." ::= { d5VideoStreamEntry 9 } d5vStreamCatCurrTimeCreated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the current CAT was created. Zero if not-applicable." ::= { d5VideoStreamEntry 10 } d5vStreamCatCurrTimeActive OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The total time the current CAT has been active." ::= { d5VideoStreamEntry 11 } d5vStreamCatPrevTimeCreated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the predecessor of this CAT was created. Zero if not-known." ::= { d5VideoStreamEntry 12 } d5VideoStreamProgramTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoStreamProgramEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores basic information for each Program in each Transport Stream known to the D5. Each entry in d5VideoStreamTable will have at least one entry in this table." ::= { d5VideoObjects 5 } d5VideoStreamProgramEntry OBJECT-TYPE SYNTAX D5VideoStreamProgramEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vStreamProgTsMibIndex, d5vStreamProgIndex} ::= { d5VideoStreamProgramTable 1 } D5VideoStreamProgramEntry ::= SEQUENCE { d5vStreamProgTsMibIndex D5TransportStreamIndex, d5vStreamProgIndex D5Program, d5vStreamProgPmtVersion Unsigned32, d5vStreamProgPmtPid D5PID, d5vStreamProgPcrPid D5PID, d5vStreamProgEsCount Gauge32, d5vStreamProgDescCount Gauge32, d5vStreamPmtCurrTimeCreated TimeStamp, d5vStreamPmtCurrTimeActive Counter32, d5vStreamPmtPrevTimeCreated TimeStamp, d5vStreamProgBitrate Unsigned32 } d5vStreamProgTsMibIndex OBJECT-TYPE SYNTAX D5TransportStreamIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index that identifies the Transport Stream containing this Program." ::= { d5VideoStreamProgramEntry 1 } d5vStreamProgIndex OBJECT-TYPE SYNTAX D5Program MAX-ACCESS read-only STATUS current DESCRIPTION "The Program Number for this program within the associated Transport Stream." ::= { d5VideoStreamProgramEntry 2 } d5vStreamProgPmtVersion OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The version number of the current PMT Table for this Program." ::= { d5VideoStreamProgramEntry 3 } d5vStreamProgPmtPid OBJECT-TYPE SYNTAX D5PID MAX-ACCESS read-only STATUS current DESCRIPTION "The MPEG PID used for the PMT Table for this Program." ::= { d5VideoStreamProgramEntry 4 } d5vStreamProgPcrPid OBJECT-TYPE SYNTAX D5PID MAX-ACCESS read-only STATUS current DESCRIPTION "The MPEG PID used to for the PCR for this Program." ::= { d5VideoStreamProgramEntry 5 } d5vStreamProgEsCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Elementary Streams currently in this Program." ::= { d5VideoStreamProgramEntry 6 } d5vStreamProgDescCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Descriptors in the PMT 'first_loop' for this Program." ::= { d5VideoStreamProgramEntry 7 } d5vStreamPmtCurrTimeCreated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the current PMT was created. Zero if not-applicable." ::= { d5VideoStreamProgramEntry 8 } d5vStreamPmtCurrTimeActive OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The total time the current PMT has been active." ::= { d5VideoStreamProgramEntry 9 } d5vStreamPmtPrevTimeCreated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the predecessor of this PMT was created. Zero if not-known." ::= { d5VideoStreamProgramEntry 10 } d5vStreamProgBitrate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The bitate in Kbps, of this Program. This may have a value of 0 if the bitrate is not known." ::= { d5VideoStreamProgramEntry 11 } d5VideoStreamEsTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoStreamEsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores basic information for each Elementary Stream in each Transport Stream known to the D5. Each entry in d5VideoProgTable will have at least one entry in this table. These entries are created automatically as the D5 processes PMT table entries for each Elementary Stream in a Program" ::= { d5VideoObjects 6 } d5VideoStreamEsEntry OBJECT-TYPE SYNTAX D5VideoStreamEsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vStreamEsTsMibIndex, d5vStreamEsProgIndex, d5vStreamEsPidIndex} ::= { d5VideoStreamEsTable 1 } D5VideoStreamEsEntry ::= SEQUENCE { d5vStreamEsTsMibIndex D5TransportStreamIndex, d5vStreamEsProgIndex D5Program, d5vStreamEsPidIndex D5PID, d5vStreamEsType D5ElementaryStreamType, d5vStreamEsDescCount Gauge32 } d5vStreamEsTsMibIndex OBJECT-TYPE SYNTAX D5TransportStreamIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index that identifies the Transport Stream containing this Program." ::= { d5VideoStreamEsEntry 1 } d5vStreamEsProgIndex OBJECT-TYPE SYNTAX D5Program MAX-ACCESS read-only STATUS current DESCRIPTION "The Program Number for this program within the associated Transport Stream." ::= { d5VideoStreamEsEntry 2 } d5vStreamEsPidIndex OBJECT-TYPE SYNTAX D5PID MAX-ACCESS read-only STATUS current DESCRIPTION "The MPEG PID used for this Elementary Stream." ::= { d5VideoStreamEsEntry 3 } d5vStreamEsType OBJECT-TYPE SYNTAX D5ElementaryStreamType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of this Elementary Streams." ::= { d5VideoStreamEsEntry 4 } d5vStreamEsDescCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Descriptors in the PMT 'second_loop' for this Elementary Stream." ::= { d5VideoStreamEsEntry 5 } d5VideoStreamDescTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoStreamDescEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table stores MPEG Descriptors for each Elementary Stream and Program known to the D5. The PMT PID is used to index Program Descriptors while the Elementary Stream PID is used when indexing ES Descriptors." ::= { d5VideoObjects 7 } d5VideoStreamDescEntry OBJECT-TYPE SYNTAX D5VideoStreamDescEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vStreamDescTsMibIndex, d5vStreamDescPidIndex, d5vStreamDescIndex} ::= { d5VideoStreamDescTable 1 } D5VideoStreamDescEntry ::= SEQUENCE { d5vStreamDescTsMibIndex D5TransportStreamIndex, d5vStreamDescPidIndex D5PID, d5vStreamDescIndex D5DescriptorIndex, d5vStreamDescTag D5DescriptorTag, d5vStreamDescLen INTEGER, d5vStreamDescData D5DescriptorBuffer } d5vStreamDescTsMibIndex OBJECT-TYPE SYNTAX D5TransportStreamIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The unique index that identifies the Transport Stream containing this Descriptor." ::= { d5VideoStreamDescEntry 1 } d5vStreamDescPidIndex OBJECT-TYPE SYNTAX D5PID MAX-ACCESS read-only STATUS current DESCRIPTION "The MPEG PID used for this Elementary Stream." ::= { d5VideoStreamDescEntry 2 } d5vStreamDescIndex OBJECT-TYPE SYNTAX D5DescriptorIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The Descriptor index." ::= { d5VideoStreamDescEntry 3 } d5vStreamDescTag OBJECT-TYPE SYNTAX D5DescriptorTag MAX-ACCESS read-only STATUS current DESCRIPTION "The Descriptor tag." ::= { d5VideoStreamDescEntry 4 } d5vStreamDescLen OBJECT-TYPE SYNTAX INTEGER ( 1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The Descriptor length." ::= { d5VideoStreamDescEntry 5 } d5vStreamDescData OBJECT-TYPE SYNTAX D5DescriptorBuffer MAX-ACCESS read-only STATUS current DESCRIPTION "The Descriptor data." ::= { d5VideoStreamDescEntry 6 } -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Index Lookup tables -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- d5VideoLookupTsidToIfIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoLookupTsidToIfIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maps the transport_stream_id of a Transport Stream on a QAM channel to the ifIndex for that channel." ::= { d5VideoObjects 8 } d5VideoLookupTsidToIfIndexEntry OBJECT-TYPE SYNTAX D5VideoLookupTsidToIfIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vQamTransportStreamID} ::= { d5VideoLookupTsidToIfIndexTable 1 } D5VideoLookupTsidToIfIndexEntry ::= SEQUENCE { d5vLookupTsidIfIndex InterfaceIndex } d5vLookupTsidIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex for the QAM channel transmitting this transport_stream_id." ::= { d5VideoLookupTsidToIfIndexEntry 1 } d5VideoLookupTsMibIndexToIfIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoLookupTsMibIndexToIfIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maps the TsIndex of an outgoing Transport Stream on a QAM channel to the ifIndex for that channel. The Transport Stream is assumed to be an 'outgoing' one." ::= { d5VideoObjects 9 } d5VideoLookupTsMibIndexToIfIndexEntry OBJECT-TYPE SYNTAX D5VideoLookupTsMibIndexToIfIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vQamTsMibIndex} ::= { d5VideoLookupTsMibIndexToIfIndexTable 1 } D5VideoLookupTsMibIndexToIfIndexEntry ::= SEQUENCE { d5vLookupTsIndexIfIndex InterfaceIndex } d5vLookupTsIndexIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex for the QAM channel transmitting this TransportStreamIndex." ::= { d5VideoLookupTsMibIndexToIfIndexEntry 1 } d5VideoLookupQamTsMibIndexToInTsMibIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoLookupQamTsMibIndexToInTsMibIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maps the TransportStreamIndex of a Transport Stream on a QAM channel to the corresponding incoming TransportStreamIndexes. d5vTsMibIndex - an outgoing Transport Stream d5vInTsMibIndex - the corresponding incoming Transport Stream." ::= { d5VideoObjects 10 } d5VideoLookupQamTsMibIndexToInTsMibIndexEntry OBJECT-TYPE SYNTAX D5VideoLookupQamTsMibIndexToInTsMibIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vQamTsMibIndex, d5vLookupInTsMibIndex} ::= { d5VideoLookupQamTsMibIndexToInTsMibIndexTable 1 } D5VideoLookupQamTsMibIndexToInTsMibIndexEntry ::= SEQUENCE { d5vLookupInTsMibIndex D5TransportStreamIndex } d5vLookupInTsMibIndex OBJECT-TYPE SYNTAX D5TransportStreamIndex MAX-ACCESS read-only STATUS current DESCRIPTION "MIB TsIndex for an incoming transport stream(IP)." ::= { d5VideoLookupQamTsMibIndexToInTsMibIndexEntry 1 } d5VideoLookupTsMibIndexToUdpIpTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoLookupTsMibIndexToUdpIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maps the TransportStreamIndex of an incoming Transport Stream to the IP address and UDP port for that Transport Stream." ::= { d5VideoObjects 11 } d5VideoLookupTsMibIndexToUdpIpEntry OBJECT-TYPE SYNTAX D5VideoLookupTsMibIndexToUdpIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vIpTsMibIndex} ::= { d5VideoLookupTsMibIndexToUdpIpTable 1 } D5VideoLookupTsMibIndexToUdpIpEntry ::= SEQUENCE { d5vLookupTsMibIndexUdpPort Unsigned32, d5vLookupTsMibIndexIpAddressSrc IpAddress, d5vLookupTsMibIndexIpAddressDest IpAddress } d5vLookupTsMibIndexUdpPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP receiving the Transport Stream for TransportStreamIndex." ::= { d5VideoLookupTsMibIndexToUdpIpEntry 1 } d5vLookupTsMibIndexIpAddressSrc OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The SRC IP address receiving the Transport Stream for TransportStreamIndex." ::= { d5VideoLookupTsMibIndexToUdpIpEntry 2 } d5vLookupTsMibIndexIpAddressDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The DEST IP address receiving the Transport Stream for TransportStreamIndex." ::= { d5VideoLookupTsMibIndexToUdpIpEntry 3 } -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Tables of per udp/ip PID/PROG remappings to particular QAMs -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- d5VideoUdpIpStreamProgRemapTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoUdpIpStreamProgRemapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table displays the active Program mappings for Transport Streams. It is indexed using udp/ip/ip/inProg/qamIfIndex to support multiple output programs for each input program." ::= { d5VideoObjects 12 } d5VideoUdpIpStreamProgRemapEntry OBJECT-TYPE SYNTAX D5VideoUdpIpStreamProgRemapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vProgRemapUdpIndex, d5vProgRemapIpSrcIndex, d5vProgRemapIpDestIndex, d5vProgRemapInProgIndex, d5vProgRemapActiveQamIfIndex, d5vProgRemapOutProg } ::= { d5VideoUdpIpStreamProgRemapTable 1 } D5VideoUdpIpStreamProgRemapEntry ::= SEQUENCE { d5vProgRemapUdpIndex Unsigned32, d5vProgRemapIpSrcIndex IpAddress, d5vProgRemapIpDestIndex IpAddress, d5vProgRemapInProgIndex D5Program, d5vProgRemapActiveQamIfIndex InterfaceIndex, d5vProgRemapOutProg D5Program, d5vProgRemapStatus D5ProgStatus, d5vProgRemapActiveProgType D5ProgType, d5vProgRemapTimeActivated TimeStamp, d5vProgRemapTimeActive Counter32, d5vProgRemapTimeDeactivated TimeStamp } d5vProgRemapUdpIndex OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The destination UDP Port of the incoming TS." ::= { d5VideoUdpIpStreamProgRemapEntry 1 } d5vProgRemapIpSrcIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The SRC IP address of the incoming TS." ::= { d5VideoUdpIpStreamProgRemapEntry 2 } d5vProgRemapIpDestIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The DEST IP address of the incoming TS." ::= { d5VideoUdpIpStreamProgRemapEntry 3 } d5vProgRemapInProgIndex OBJECT-TYPE SYNTAX D5Program MAX-ACCESS read-only STATUS current DESCRIPTION "The incoming Program value related to this Program remapping." ::= { d5VideoUdpIpStreamProgRemapEntry 4 } d5vProgRemapActiveQamIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of the QAM channel that this Program remapping applies to." ::= { d5VideoUdpIpStreamProgRemapEntry 5 } d5vProgRemapOutProg OBJECT-TYPE SYNTAX D5Program MAX-ACCESS read-only STATUS current DESCRIPTION "The output Program value related to this Program mapping rule." ::= { d5VideoUdpIpStreamProgRemapEntry 6 } d5vProgRemapStatus OBJECT-TYPE SYNTAX D5ProgStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of this Program - whether active or not" ::= { d5VideoUdpIpStreamProgRemapEntry 7 } d5vProgRemapActiveProgType OBJECT-TYPE SYNTAX D5ProgType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of Program whether PSI or Elementary stream." ::= { d5VideoUdpIpStreamProgRemapEntry 8 } d5vProgRemapTimeActivated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this Program was last activated. Zero if not-applicable." ::= { d5VideoUdpIpStreamProgRemapEntry 9 } d5vProgRemapTimeActive OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The total time that the Program has been active." ::= { d5VideoUdpIpStreamProgRemapEntry 10 } d5vProgRemapTimeDeactivated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this Program was last deactivated. Zero if not-known." ::= { d5VideoUdpIpStreamProgRemapEntry 11 } d5VideoUdpIpStreamPidRemapTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoUdpIpStreamPidRemapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table displays the active PID mappings for Transport Streams. It is indexed using udp/ip/ip/inPid/qamIfIndex to support multiple output programs for each input program." ::= { d5VideoObjects 13 } d5VideoUdpIpStreamPidRemapEntry OBJECT-TYPE SYNTAX D5VideoUdpIpStreamPidRemapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vPidRemapUdpIndex, d5vPidRemapIpSrcIndex, d5vPidRemapIpDestIndex, d5vPidRemapInPidIndex, d5vPidRemapActiveQamIfIndex, d5vPidRemapOutPid } ::= { d5VideoUdpIpStreamPidRemapTable 1 } D5VideoUdpIpStreamPidRemapEntry ::= SEQUENCE { d5vPidRemapUdpIndex Unsigned32, d5vPidRemapIpSrcIndex IpAddress, d5vPidRemapIpDestIndex IpAddress, d5vPidRemapInPidIndex D5PID, d5vPidRemapActiveQamIfIndex InterfaceIndex, d5vPidRemapOutPid D5PID, d5vPidRemapStatus D5PidStatus, d5vPidRemapActivePidType D5PidType, d5vPidRemapTimeActivated TimeStamp, d5vPidRemapTimeActive Counter32, d5vPidRemapTimeDeactivated TimeStamp } d5vPidRemapUdpIndex OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The destination UDP Port of the incoming TS." ::= { d5VideoUdpIpStreamPidRemapEntry 1 } d5vPidRemapIpSrcIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The SRC IP address of the incoming TS." ::= { d5VideoUdpIpStreamPidRemapEntry 2 } d5vPidRemapIpDestIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The DEST IP address of the incoming TS." ::= { d5VideoUdpIpStreamPidRemapEntry 3 } d5vPidRemapInPidIndex OBJECT-TYPE SYNTAX D5PID MAX-ACCESS read-only STATUS current DESCRIPTION "The incoming PID value related to this PID remapping." ::= { d5VideoUdpIpStreamPidRemapEntry 4 } d5vPidRemapActiveQamIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of the QAM channel that this PID remapping applies to." ::= { d5VideoUdpIpStreamPidRemapEntry 5 } d5vPidRemapOutPid OBJECT-TYPE SYNTAX D5PID MAX-ACCESS read-only STATUS current DESCRIPTION "The output PID value related to this PID mapping rule." ::= { d5VideoUdpIpStreamPidRemapEntry 6 } d5vPidRemapStatus OBJECT-TYPE SYNTAX D5PidStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of this PID - whether active or not" ::= { d5VideoUdpIpStreamPidRemapEntry 7 } d5vPidRemapActivePidType OBJECT-TYPE SYNTAX D5PidType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of PID whether PSI or Elementary stream." ::= { d5VideoUdpIpStreamPidRemapEntry 8 } d5vPidRemapTimeActivated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this PID was last activated. Zero if not-applicable." ::= { d5VideoUdpIpStreamPidRemapEntry 9 } d5vPidRemapTimeActive OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The total time that the PID has been active." ::= { d5VideoUdpIpStreamPidRemapEntry 10 } d5vPidRemapTimeDeactivated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this PID was last deactivated. Zero if not-known." ::= { d5VideoUdpIpStreamPidRemapEntry 11 } -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Configured remapping/filtering Rules based on QAM port -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- d5VideoRuleQamProgRemapTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoRuleQamProgRemapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains list of qam-channel based configured program remapping rules." ::= { d5VideoObjects 14 } d5VideoRuleQamProgRemapEntry OBJECT-TYPE SYNTAX D5VideoRuleQamProgRemapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex, d5vProgRemapInProgIndex } ::= { d5VideoRuleQamProgRemapTable 1 } D5VideoRuleQamProgRemapEntry ::= SEQUENCE { d5vRQamProgRowStatus RowStatus, d5vRQamProgOutProg D5Program, d5vRQamProgMatchLastTime TimeStamp, d5vRQamProgMatchCount Counter32, d5vRQamProgPersistence D5PersistenceType } d5vRQamProgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus for controlling entries in this table." ::= { d5VideoRuleQamProgRemapEntry 1 } d5vRQamProgOutProg OBJECT-TYPE SYNTAX D5Program MAX-ACCESS read-create STATUS current DESCRIPTION "The output Program value related to this rule." ::= { d5VideoRuleQamProgRemapEntry 2 } d5vRQamProgMatchLastTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleQamProgRemapEntry 3 } d5vRQamProgMatchCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this rule was matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleQamProgRemapEntry 4 } d5vRQamProgPersistence OBJECT-TYPE SYNTAX D5PersistenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. " DEFVAL { nonVolatile } ::= { d5VideoRuleQamProgRemapEntry 5 } d5VideoRuleQamProgFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoRuleQamProgFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains list of qam-channel based configured program filter rules." ::= { d5VideoObjects 15 } d5VideoRuleQamProgFilterEntry OBJECT-TYPE SYNTAX D5VideoRuleQamProgFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex, d5vProgRemapInProgIndex } ::= { d5VideoRuleQamProgFilterTable 1 } D5VideoRuleQamProgFilterEntry ::= SEQUENCE { d5vRQamProgFiltRowStatus RowStatus, d5vRQamProgFiltMatchLastTime TimeStamp, d5vRQamProgFiltMatchCount Counter32, d5vRQamProgFiltPersistence D5PersistenceType } d5vRQamProgFiltRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus for controlling entries in this table." ::= { d5VideoRuleQamProgFilterEntry 1 } d5vRQamProgFiltMatchLastTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleQamProgFilterEntry 2 } d5vRQamProgFiltMatchCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this rule was matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleQamProgFilterEntry 3 } d5vRQamProgFiltPersistence OBJECT-TYPE SYNTAX D5PersistenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. " DEFVAL { nonVolatile } ::= { d5VideoRuleQamProgFilterEntry 4 } d5VideoRuleQamPidRemapTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoRuleQamPidRemapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains list of qam-channel based configured PID remapping rules." ::= { d5VideoObjects 16 } d5VideoRuleQamPidRemapEntry OBJECT-TYPE SYNTAX D5VideoRuleQamPidRemapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex, d5vPidRemapInPidIndex } ::= { d5VideoRuleQamPidRemapTable 1 } D5VideoRuleQamPidRemapEntry ::= SEQUENCE { d5vRQamPidRowStatus RowStatus, d5vRQamPidOutPid D5PID, d5vRQamPidLastMatchTime TimeStamp, d5vRQamPidMatchCount Counter32, d5vRQamPidPersistence D5PersistenceType } d5vRQamPidRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus for controlling entries in this table." ::= { d5VideoRuleQamPidRemapEntry 1 } d5vRQamPidOutPid OBJECT-TYPE SYNTAX D5PID MAX-ACCESS read-create STATUS current DESCRIPTION "The output PID value related to this rule." ::= { d5VideoRuleQamPidRemapEntry 2 } d5vRQamPidLastMatchTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleQamPidRemapEntry 3 } d5vRQamPidMatchCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this rule was matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleQamPidRemapEntry 4 } d5vRQamPidPersistence OBJECT-TYPE SYNTAX D5PersistenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. " DEFVAL { nonVolatile } ::= { d5VideoRuleQamPidRemapEntry 5 } d5VideoRuleQamPidFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoRuleQamPidFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains list of qam-channel based configured PID filter rules." ::= { d5VideoObjects 17 } d5VideoRuleQamPidFilterEntry OBJECT-TYPE SYNTAX D5VideoRuleQamPidFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex, d5vPidRemapInPidIndex } ::= { d5VideoRuleQamPidFilterTable 1 } D5VideoRuleQamPidFilterEntry ::= SEQUENCE { d5vRQamPidFiltRowStatus RowStatus, d5vRQamPidFiltLastMatchTime TimeStamp, d5vRQamPidFiltMatchCount Counter32, d5vRQamPidFiltPersistence D5PersistenceType } d5vRQamPidFiltRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus for controlling entries in this table." ::= { d5VideoRuleQamPidFilterEntry 1 } d5vRQamPidFiltLastMatchTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleQamPidFilterEntry 2 } d5vRQamPidFiltMatchCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this rule was matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleQamPidFilterEntry 3 } d5vRQamPidFiltPersistence OBJECT-TYPE SYNTAX D5PersistenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. " DEFVAL { nonVolatile } ::= { d5VideoRuleQamPidFilterEntry 4 } -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Configured remapping/filtering Rules based on UDP/IP identification -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- d5VideoRuleUdpIpProgFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoRuleUdpIpProgFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains list of UDP/IP based configured program filter rules." ::= { d5VideoObjects 18 } d5VideoRuleUdpIpProgFilterEntry OBJECT-TYPE SYNTAX D5VideoRuleUdpIpProgFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vProgRemapUdpIndex, d5vProgRemapIpSrcIndex, d5vProgRemapIpDestIndex, d5vProgRemapInProgIndex } ::= { d5VideoRuleUdpIpProgFilterTable 1 } D5VideoRuleUdpIpProgFilterEntry ::= SEQUENCE { d5vRUdpIpProgFiltRowStatus RowStatus, d5vRUdpIpProgFiltMatchLastTime TimeStamp, d5vRUdpIpProgFiltMatchCount Counter32, d5vRUdpIpProgFiltPersistence D5PersistenceType } d5vRUdpIpProgFiltRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus for controlling entries in this table." ::= { d5VideoRuleUdpIpProgFilterEntry 1 } d5vRUdpIpProgFiltMatchLastTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleUdpIpProgFilterEntry 2 } d5vRUdpIpProgFiltMatchCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this rule was matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleUdpIpProgFilterEntry 3 } d5vRUdpIpProgFiltPersistence OBJECT-TYPE SYNTAX D5PersistenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. " DEFVAL { nonVolatile } ::= { d5VideoRuleUdpIpProgFilterEntry 4 } d5VideoRuleUdpIpPidFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoRuleUdpIpPidFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains list of UDP/IP based configured PID filter rules." ::= { d5VideoObjects 19 } d5VideoRuleUdpIpPidFilterEntry OBJECT-TYPE SYNTAX D5VideoRuleUdpIpPidFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vPidRemapUdpIndex, d5vPidRemapIpSrcIndex, d5vPidRemapIpDestIndex, d5vPidRemapInPidIndex } ::= { d5VideoRuleUdpIpPidFilterTable 1 } D5VideoRuleUdpIpPidFilterEntry ::= SEQUENCE { d5vRUdpIpPidFiltRowStatus RowStatus, d5vRUdpIpPidFiltLastMatchTime TimeStamp, d5vRUdpIpPidFiltMatchCount Counter32, d5vRUdpIpPidFiltPersistence D5PersistenceType } d5vRUdpIpPidFiltRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus for controlling entries in this table." ::= { d5VideoRuleUdpIpPidFilterEntry 1 } d5vRUdpIpPidFiltLastMatchTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleUdpIpPidFilterEntry 2 } d5vRUdpIpPidFiltMatchCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this rule was matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleUdpIpPidFilterEntry 3 } d5vRUdpIpPidFiltPersistence OBJECT-TYPE SYNTAX D5PersistenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. " DEFVAL { nonVolatile } ::= { d5VideoRuleUdpIpPidFilterEntry 4 } d5VideoRuleUdpIpProgRemapTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoRuleUdpIpProgRemapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains list of udp/ip based configured program remapping rules." ::= { d5VideoObjects 20 } d5VideoRuleUdpIpProgRemapEntry OBJECT-TYPE SYNTAX D5VideoRuleUdpIpProgRemapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vRUdpIpProgUdpIndex, d5vRUdpIpProgIpSrcIndex, d5vRUdpIpProgIpDestIndex, d5vRUdpIpProgInProgIndex } ::= { d5VideoRuleUdpIpProgRemapTable 1 } D5VideoRuleUdpIpProgRemapEntry ::= SEQUENCE { d5vRUdpIpProgUdpIndex Unsigned32, d5vRUdpIpProgIpSrcIndex IpAddress, d5vRUdpIpProgIpDestIndex IpAddress, d5vRUdpIpProgInProgIndex D5Program, d5vRUdpIpProgRowStatus RowStatus, d5vRUdpIpProgOutProg D5Program, d5vRUdpIpProgMatchLastTime TimeStamp, d5vRUdpIpProgMatchCount Counter32, d5vRUdpIpProgPersistence D5PersistenceType, d5vRUdpIpProgExpectedBitrate Unsigned32 } d5vRUdpIpProgUdpIndex OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The destination UDP Port of the incoming TS.(A value of 0 in a rule means that the udp-port can be ANY value for pattern-matching)" ::= { d5VideoRuleUdpIpProgRemapEntry 1 } d5vRUdpIpProgIpSrcIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The SRC IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching)" ::= { d5VideoRuleUdpIpProgRemapEntry 2 } d5vRUdpIpProgIpDestIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The DEST IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching)" ::= { d5VideoRuleUdpIpProgRemapEntry 3 } d5vRUdpIpProgInProgIndex OBJECT-TYPE SYNTAX D5Program MAX-ACCESS read-create STATUS current DESCRIPTION "The incoming Program value related to this Program remapping." ::= { d5VideoRuleUdpIpProgRemapEntry 4 } d5vRUdpIpProgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus for controlling entries in this table." ::= { d5VideoRuleUdpIpProgRemapEntry 5 } d5vRUdpIpProgOutProg OBJECT-TYPE SYNTAX D5Program MAX-ACCESS read-create STATUS current DESCRIPTION "The output Program value related to this Program mapping rule." ::= { d5VideoRuleUdpIpProgRemapEntry 6 } d5vRUdpIpProgMatchLastTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleUdpIpProgRemapEntry 7 } d5vRUdpIpProgMatchCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this rule was matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleUdpIpProgRemapEntry 8 } d5vRUdpIpProgPersistence OBJECT-TYPE SYNTAX D5PersistenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. " DEFVAL { nonVolatile } ::= { d5VideoRuleUdpIpProgRemapEntry 9 } d5vRUdpIpProgExpectedBitrate OBJECT-TYPE SYNTAX Unsigned32(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The expected bitate in Kbps, of the video program. If this is set it is used to calculate the initial jitter-buffer size to be used for the program when it is activated. (may be set to 0 to indicated an unknown value)" DEFVAL { 0 } ::= { d5VideoRuleUdpIpProgRemapEntry 10 } d5VideoRuleUdpIpPidRemapTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoRuleUdpIpPidRemapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains list of udp/ip based configured pid remapping rules." ::= { d5VideoObjects 21 } d5VideoRuleUdpIpPidRemapEntry OBJECT-TYPE SYNTAX D5VideoRuleUdpIpPidRemapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vRUdpIpPidUdpIndex, d5vRUdpIpPidIpSrcIndex, d5vRUdpIpPidIpDestIndex, d5vRUdpIpPidInPidIndex} ::= { d5VideoRuleUdpIpPidRemapTable 1 } D5VideoRuleUdpIpPidRemapEntry ::= SEQUENCE { d5vRUdpIpPidUdpIndex Unsigned32, d5vRUdpIpPidIpSrcIndex IpAddress, d5vRUdpIpPidIpDestIndex IpAddress, d5vRUdpIpPidInPidIndex D5PID, d5vRUdpIpPidRowStatus RowStatus, d5vRUdpIpPidOutPid D5PID, d5vRUdpIpPidMatchLastTime TimeStamp, d5vRUdpIpPidMatchCount Counter32, d5vRUdpIpPidPersistence D5PersistenceType } d5vRUdpIpPidUdpIndex OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The destination UDP Port of the incoming TS.(A value of 0 in a rule means that the udp-port can be ANY value for pattern-matching)" ::= { d5VideoRuleUdpIpPidRemapEntry 1 } d5vRUdpIpPidIpSrcIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The SRC IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching rules)" ::= { d5VideoRuleUdpIpPidRemapEntry 2 } d5vRUdpIpPidIpDestIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The DEST IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching rules)" ::= { d5VideoRuleUdpIpPidRemapEntry 3 } d5vRUdpIpPidInPidIndex OBJECT-TYPE SYNTAX D5PID MAX-ACCESS read-create STATUS current DESCRIPTION "The incoming PID value related to this PID remapping." ::= { d5VideoRuleUdpIpPidRemapEntry 4 } d5vRUdpIpPidRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus for controlling entries in this table." ::= { d5VideoRuleUdpIpPidRemapEntry 5 } d5vRUdpIpPidOutPid OBJECT-TYPE SYNTAX D5PID MAX-ACCESS read-create STATUS current DESCRIPTION "The output PID value related to this PID mapping rule." ::= { d5VideoRuleUdpIpPidRemapEntry 6 } d5vRUdpIpPidMatchLastTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleUdpIpPidRemapEntry 7 } d5vRUdpIpPidMatchCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this rule was matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleUdpIpPidRemapEntry 8 } d5vRUdpIpPidPersistence OBJECT-TYPE SYNTAX D5PersistenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. " DEFVAL { nonVolatile } ::= { d5VideoRuleUdpIpPidRemapEntry 9 } -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- SI-STREAM table (For controlling statically allocated streams that provide -- (P)SI tables for the QAM channel out-of-band to the actual -- video and audio streams -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- d5VideoUdpIpSiStreamTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoUdpIpSiStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table displays the statically allocated SI-streams. SI-streams are dedicated IP streams that provide SI table for a particular QAM channel. The data in an SI stream is sent to the QAM without any PID remapping and it is assumed that the SI-stream does not conflict with any elementary-streams, or auto-generated (P)SI tables. SI-streams are typically used when (P)SI table auto-generation is disabled on the D5. The variables d5vIpSiConfQamIfIndex and d5vIpSiConfChanContName are mutually exclusive, where a value of 0 for ifIndex or 0-length for d5vIpSiConfChanContName can be used to indicate an unspecified value." ::= { d5VideoObjects 22 } d5VideoUdpIpSiStreamEntry OBJECT-TYPE SYNTAX D5VideoUdpIpSiStreamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vIpUdpSiIndex, d5vIpSrcSiIndex, d5vIpDestSiIndex } ::= { d5VideoUdpIpSiStreamTable 1 } D5VideoUdpIpSiStreamEntry ::= SEQUENCE { d5vIpUdpSiIndex Unsigned32, d5vIpSrcSiIndex IpAddress, d5vIpDestSiIndex IpAddress, d5vIpSiRowStatus RowStatus, d5vIpSiTsMibIndex D5TransportStreamIndex, d5vIpSiConfQamIfIndex InterfaceIndexOrZero, d5vIpSiConfChanContName D5VideoChannelContainerNameType, d5vIpSiStreamStatus D5TransportStreamStatus, d5vIpSiTimeActivated TimeStamp, d5vIpSiTimeActive Counter32, d5vIpSiTimeDeactivated TimeStamp, d5vIpSiPersistence D5PersistenceType, d5vIpSiCopyback Unsigned32 } d5vIpUdpSiIndex OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The destination UDP Port to be mapped to the specified QAM Channel and Program Number." ::= { d5VideoUdpIpSiStreamEntry 1 } d5vIpSrcSiIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The SRC IP address of the SI TS to be mapped to the specified QAM Channel and Program Number." ::= { d5VideoUdpIpSiStreamEntry 2 } d5vIpDestSiIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The DEST IP address of the SI TS to be mapped to the specified QAM Channel and Program Number." ::= { d5VideoUdpIpSiStreamEntry 3 } d5vIpSiRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus for controlling entries in this table." ::= { d5VideoUdpIpSiStreamEntry 4 } d5vIpSiTsMibIndex OBJECT-TYPE SYNTAX D5TransportStreamIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the entry in the d5VideoStreamTable for corresponding to this table entry." ::= { d5VideoUdpIpSiStreamEntry 5 } d5vIpSiConfQamIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex of the QAM channel that this SI-stream is configured to be mapped to." ::= { d5VideoUdpIpSiStreamEntry 6 } d5vIpSiConfChanContName OBJECT-TYPE SYNTAX D5VideoChannelContainerNameType MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the channel-container that this SI-stream is configured to be mapped to." ::= { d5VideoUdpIpSiStreamEntry 7 } d5vIpSiStreamStatus OBJECT-TYPE SYNTAX D5TransportStreamStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of this IP SI Transport stream" ::= { d5VideoUdpIpSiStreamEntry 8 } d5vIpSiTimeActivated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this stream was last activated. Zero if not-applicable." ::= { d5VideoUdpIpSiStreamEntry 9 } d5vIpSiTimeActive OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The total time that MPEG stream has been active." ::= { d5VideoUdpIpSiStreamEntry 10 } d5vIpSiTimeDeactivated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this stream was last deactivated. Zero if not-known." ::= { d5VideoUdpIpSiStreamEntry 11 } d5vIpSiPersistence OBJECT-TYPE SYNTAX D5PersistenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. " DEFVAL { nonVolatile } ::= { d5VideoUdpIpSiStreamEntry 12 } d5vIpSiCopyback OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This is used to setup the SI stream as an EAS stream. " DEFVAL { 0 } ::= { d5VideoUdpIpSiStreamEntry 13 } -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Channel-container tables -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- d5VideoChannelContainerTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoChannelContainerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains list of channel-containers that can be used to group individual QAM-channels together. Channel-containers can serve multiple purposes: - group qam-channels to which an EMM can be multicast. - group qam-channels to which an input transport-stream can be replicated. - ..." ::= { d5VideoObjects 30 } d5VideoChannelContainerEntry OBJECT-TYPE SYNTAX D5VideoChannelContainerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vChanContName } ::= { d5VideoChannelContainerTable 1 } D5VideoChannelContainerEntry ::= SEQUENCE { d5vChanContName D5VideoChannelContainerNameType, d5vChanContRowStatus RowStatus, d5vChanContServiceId D5Program, d5vChanContPid D5PID, d5vChanContPersistence D5PersistenceType } d5vChanContName OBJECT-TYPE SYNTAX D5VideoChannelContainerNameType MAX-ACCESS read-create STATUS current DESCRIPTION "Channel-container identifier." ::= { d5VideoChannelContainerEntry 1 } d5vChanContRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus for controlling entries in this table." ::= { d5VideoChannelContainerEntry 2 } d5vChanContServiceId OBJECT-TYPE SYNTAX D5Program MAX-ACCESS read-create STATUS current DESCRIPTION "Common program-number used for virtual-programs in this channel-container. (may be set to 0 to indicate an unspecified value)" ::= { d5VideoChannelContainerEntry 3 } d5vChanContPid OBJECT-TYPE SYNTAX D5PID MAX-ACCESS read-create STATUS current DESCRIPTION "Common PID used for EMM or PDG data in this channel- container. (may be set to 0 to indicate an unspecified value)" ::= { d5VideoChannelContainerEntry 4 } d5vChanContPersistence OBJECT-TYPE SYNTAX D5PersistenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. " DEFVAL { nonVolatile } ::= { d5VideoChannelContainerEntry 5 } d5VideoChannelContainerQamTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoChannelContainerQamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains list of QAM channel-container group memberships. A single QAM can be a member of multiple replication groups. A single QAM can also be a member of the same replication group multiple times, using different output programs. The index variables d5vChanContQamIfIndex and d5vChanContQamTsidIndex must be considered mutually exclusive, where a value of 0 for either ifIndex or TSID can be used to indicate an unspecified value. One of, but not both of, these must be non-zero in any particular row, in order to constitute a valid row-index. " ::= { d5VideoObjects 31 } d5VideoChannelContainerQamEntry OBJECT-TYPE SYNTAX D5VideoChannelContainerQamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vChanContName, d5vChanContQamIfIndex, d5vChanContQamTsidIndex, d5vChanContQamProgIndex } ::= { d5VideoChannelContainerQamTable 1 } D5VideoChannelContainerQamEntry ::= SEQUENCE { d5vChanContQamIfIndex InterfaceIndexOrZero, d5vChanContQamTsidIndex Unsigned32, d5vChanContQamProgIndex D5Program, d5vChanContQamRowStatus RowStatus, d5vChanContQamPersistence D5PersistenceType } d5vChanContQamIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex of the QAM channel. (may be set to 0 to indicated an unspecified value)" ::= { d5VideoChannelContainerQamEntry 1 } d5vChanContQamTsidIndex OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The MPEG transport_stream_id of the QAM-channel. (may be set to 0 to indicated an unspecified value)" ::= { d5VideoChannelContainerQamEntry 2 } d5vChanContQamProgIndex OBJECT-TYPE SYNTAX D5Program MAX-ACCESS read-create STATUS current DESCRIPTION "The output program number associated with this membership rule. (may be set to 0 to indicated an unspecified value)" ::= { d5VideoChannelContainerQamEntry 3 } d5vChanContQamRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus for controlling entries in this table." ::= { d5VideoChannelContainerQamEntry 4 } d5vChanContQamPersistence OBJECT-TYPE SYNTAX D5PersistenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. " DEFVAL { nonVolatile } ::= { d5VideoChannelContainerQamEntry 5 } d5VideoChannelContainerVirtProgTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoChannelContainerVirtProgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains list of virtual programs with their associated channel-container names. Virtual programs are used for creating replications where individual input streams are copied to to multiple concurrent output QAMs/Programs. (NOTE: a virtual-program can belong to no more than 1 channel-containers)" ::= { d5VideoObjects 32 } d5VideoChannelContainerVirtProgEntry OBJECT-TYPE SYNTAX D5VideoChannelContainerVirtProgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vChanContVProgUdpIndex, d5vChanContVProgSrcIpIndex, d5vChanContVProgDestIpIndex } ::= { d5VideoChannelContainerVirtProgTable 1 } D5VideoChannelContainerVirtProgEntry ::= SEQUENCE { d5vChanContVProgUdpIndex Unsigned32, d5vChanContVProgSrcIpIndex IpAddress, d5vChanContVProgDestIpIndex IpAddress, d5vChanContVProgRowStatus RowStatus, d5vChanContVProgName D5VideoChannelContainerNameType, d5vChanContVProgConfProgPassThroughEnabled TruthValue, d5vChanContVProgConfPidPassThroughEnabled TruthValue, d5vChanContVProgConfRedundantMulticast TruthValue, d5vChanContVProgPersistence D5PersistenceType, d5vChanContVProgExpectedBitrate Unsigned32, d5vChanContVProgConfVideoSiStreamEnabled TruthValue } d5vChanContVProgUdpIndex OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The destination UDP Port of the incoming TS.(A value of 0 in a rule means that the udp-port can be ANY value for pattern-matching)" ::= { d5VideoChannelContainerVirtProgEntry 1 } d5vChanContVProgSrcIpIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The SRC IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching rules)" ::= { d5VideoChannelContainerVirtProgEntry 2 } d5vChanContVProgDestIpIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The DEST IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching rules)" ::= { d5VideoChannelContainerVirtProgEntry 3 } d5vChanContVProgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus for controlling entries in this table." ::= { d5VideoChannelContainerVirtProgEntry 4 } d5vChanContVProgName OBJECT-TYPE SYNTAX D5VideoChannelContainerNameType MAX-ACCESS read-create STATUS current DESCRIPTION "Channel-container identifier. Must match an entry in the d5VideoChannelContainerTable table." ::= { d5VideoChannelContainerVirtProgEntry 5 } d5vChanContVProgConfProgPassThroughEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This can be used to configure default PROG remapping for this stream. If this is set to TRUE, input PROGs are mapped to identical output PIDs (as if pass-through mode were enabled on the QAM). " DEFVAL {FALSE} ::= { d5VideoChannelContainerVirtProgEntry 6 } d5vChanContVProgConfPidPassThroughEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This can be used to configure default PID remapping for this stream. If this is set to TRUE, input PIDs are mapped to identical output PIDs (as if pass-through mode were enabled on the QAM). " DEFVAL {FALSE} ::= { d5VideoChannelContainerVirtProgEntry 7 } d5vChanContVProgConfRedundantMulticast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This can be used to configure a video stream for redundancy May be set to TRUE only if the d5vIpSrcIndex is set to 0 and the d5vIpDestIndex is set to a valid multicast address and the d5vIpUdpIndex is set to a non-zero value. When this value is set to TRUE, the D5 WAN card doesn't distinguish between packets with different srcIp values, where the d5vIpUdpIndex and d5vIpDestIndex match this rule. " DEFVAL {FALSE} ::= { d5VideoChannelContainerVirtProgEntry 8 } d5vChanContVProgPersistence OBJECT-TYPE SYNTAX D5PersistenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. " DEFVAL { nonVolatile } ::= { d5VideoChannelContainerVirtProgEntry 9 } d5vChanContVProgExpectedBitrate OBJECT-TYPE SYNTAX Unsigned32(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The expected bitate in Kbps, of the video program. If this is set it is used to calculate the initial jitter-buffer size to be used for the program when it is activated. (may be set to 0 to indicated an unknown value)" DEFVAL { 0 } ::= { d5VideoChannelContainerVirtProgEntry 10 } d5vChanContVProgConfVideoSiStreamEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Used to configure this virtual-program to be treated as a video-si-stream." DEFVAL {FALSE} ::= { d5VideoChannelContainerVirtProgEntry 11 } -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- QAM jitter-buffering tables -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- d5VideoQamJitterTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoQamJitterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This Table contains list of rules that regulate the amount of jitter buffering in milliseconds that is used used for video programs. Can be used to increase jitter buffering so that the D5 will smooth out video programs that may have a lot of jitter, or alternatively to decrease jitter buffering so that the latency through the D5 is reduced. The low and high bitrate thresholds are not allowed to overlap between rules that share the same ifIndex and serviceId ." ::= { d5VideoObjects 33 } d5VideoQamJitterEntry OBJECT-TYPE SYNTAX D5VideoQamJitterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vQamJitterIfIndex, d5vQamJitterServiceId, d5vQamJitterThreshBitrateLow, d5vQamJitterThreshBitrateHigh } ::= { d5VideoQamJitterTable 1 } D5VideoQamJitterEntry ::= SEQUENCE { d5vQamJitterIfIndex InterfaceIndexOrZero, d5vQamJitterServiceId D5Program, d5vQamJitterThreshBitrateLow Unsigned32, d5vQamJitterThreshBitrateHigh Unsigned32, d5vQamJitterMilliseconds Unsigned32, d5vQamJitterRowStatus RowStatus, d5vQamJitterPersistence D5PersistenceType } d5vQamJitterIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex of the QAM channel associated with this rule. (may be set to 0 to indicated an unspecified value)" ::= { d5VideoQamJitterEntry 1 } d5vQamJitterServiceId OBJECT-TYPE SYNTAX D5Program MAX-ACCESS read-create STATUS current DESCRIPTION "The output program number associated with this rule. (may be set to 0 to indicated an unspecified value)" ::= { d5VideoQamJitterEntry 2 } d5vQamJitterThreshBitrateLow OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The lower bitate threshold in Kbps, of the video stream(s) for which this jitter setting is to be used. (may be set to 0 to indicated an unspecified lower value)" ::= { d5VideoQamJitterEntry 3 } d5vQamJitterThreshBitrateHigh OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The upper bitate threshold in Kbps, of the video stream(s) for which this jitter setting is to be used. (may be set to 0 to indicated an unspecified upper value)" ::= { d5VideoQamJitterEntry 4 } d5vQamJitterMilliseconds OBJECT-TYPE SYNTAX Unsigned32 (0..500) MAX-ACCESS read-write STATUS current DESCRIPTION "The setting for jitter-buffer length in milliseconds for video programs matching this rule. Can be set to a small value to reduce latency through the box, or set to a higher value to compensate for more jitter in the input video stream." ::= { d5VideoQamJitterEntry 5 } d5vQamJitterRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus for controlling entries in this table." ::= { d5VideoQamJitterEntry 6 } d5vQamJitterPersistence OBJECT-TYPE SYNTAX D5PersistenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. " DEFVAL { nonVolatile } ::= { d5VideoQamJitterEntry 7 } d5VideoQamJitterStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoQamJitterStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This Table contains status information about the QAM dejitter buffers on a per-program basis. Entries in this table only persist for the life-time of the active programs, and are created & deleted on the fly as programs are shutdown & restarted. The counters are reset when the program is shutdown, or when the jitter-buffer is reset. " ::= { d5VideoObjects 34 } d5VideoQamJitterStatusEntry OBJECT-TYPE SYNTAX D5VideoQamJitterStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5QamJitterStatusIfIndex, d5QamJitterStatusServiceId } ::= { d5VideoQamJitterStatusTable 1 } D5VideoQamJitterStatusEntry ::= SEQUENCE { d5QamJitterStatusIfIndex InterfaceIndex, d5QamJitterStatusServiceId D5Program, d5QamJitterStatusCurrStatus INTEGER, d5QamJitterStatusUnderflowCount Unsigned32, d5QamJitterStatusOverflowCount Unsigned32, d5QamJitterStatusBufferLengthInBytes Unsigned32, d5QamJitterStatusFixedBufferLength TruthValue, d5QamJitterStatusBufferLengthInMs Unsigned32, d5vQamJitterStatusBitrate Unsigned32, d5QamJitterStatusResetQueue TruthValue, d5QamJitterStatusBufferSizeInBytes Unsigned32 } d5QamJitterStatusIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of the QAM channel associated with this entry." ::= { d5VideoQamJitterStatusEntry 1 } d5QamJitterStatusServiceId OBJECT-TYPE SYNTAX D5Program MAX-ACCESS read-only STATUS current DESCRIPTION "The output program number associated with this entry." ::= { d5VideoQamJitterStatusEntry 2 } d5QamJitterStatusCurrStatus OBJECT-TYPE SYNTAX INTEGER { idle(1), fillingBuffer(2), active(3), underflow(4), overflow(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the jitter buffer for this program. idle - waiting for input TS packets fillingBuffer - waiting for the dejitter buffer to fill up for normal operation. active - operating normally, passing traffic. underflow - not receiving enough traffic, buffer has been reset. overflow - receiving too much traffic, buffer has been reset. " ::= { d5VideoQamJitterStatusEntry 3 } d5QamJitterStatusUnderflowCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times the jitter buffer has underflowed during the lifetime of this program." ::= { d5VideoQamJitterStatusEntry 4 } d5QamJitterStatusOverflowCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times the jitter buffer has overflowed during the lifetime of this program." ::= { d5VideoQamJitterStatusEntry 5 } d5QamJitterStatusBufferLengthInBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes in-use for the jitter buffer of this program." ::= { d5VideoQamJitterStatusEntry 6 } d5QamJitterStatusFixedBufferLength OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the jitter buffer for this program consists of a fixed number of bytes, or if the QAM-FPGA is configured to reallocate memory dynamically as the program-bitrate fluctuates." ::= { d5VideoQamJitterStatusEntry 7 } d5QamJitterStatusBufferLengthInMs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the jitter buffer for this program in milliseconds." ::= { d5VideoQamJitterStatusEntry 8 } d5vQamJitterStatusBitrate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The bitate in Kbps, of this Program. This may have a value of 0 if the bitrate is not known." ::= { d5VideoQamJitterStatusEntry 9 } d5QamJitterStatusResetQueue OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Write a value of TRUE to empty the jitter buffer, (re)initialize the active buffer-length to the configured value in the d5VideoQamJitterTable, and reset the jitter buffer state back to the initial idle state. NOTE: resetting the buffer results in a temporary loss of MPEG output for the affected program since the buffer is wiped and refilled." ::= { d5VideoQamJitterStatusEntry 10 } d5QamJitterStatusBufferSizeInBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes allocated for the jitter buffer of this program." ::= { d5VideoQamJitterStatusEntry 11 } -- ----------------------------------------- -- d5VideoQamLogTable -- ----------------------------------------- d5VideoQamLogTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoQamLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the router's PIM interfaces. IGMP and PIM are enabled on all interfaces listed in this table." ::= { d5VideoObjects 40 } d5VideoQamLogEntry OBJECT-TYPE SYNTAX D5VideoQamLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the d5QamLogTable." INDEX { d5vQamLogDateTimeIndex,d5vQamLogSubIndex } ::= { d5VideoQamLogTable 1 } D5VideoQamLogEntry ::= SEQUENCE { d5vQamLogDateTimeIndex DateAndTime, d5vQamLogSubIndex Unsigned32, d5vQamLogSlotNum Unsigned32, d5vQamLogPortNum Unsigned32, d5vQamLogQamNum Unsigned32, d5vQamLogState D5VideoQamLogQamState, d5vQamLogDuration Unsigned32, d5vQamLogDescription DisplayString } d5vQamLogDateTimeIndex OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Date/Time of event occurance." ::= { d5VideoQamLogEntry 1 } d5vQamLogSubIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index used to address QAM event logs which occur at the same time." ::= { d5VideoQamLogEntry 2 } d5vQamLogSlotNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "QAM card associated with a particular event." ::= { d5VideoQamLogEntry 3 } d5vQamLogPortNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "QAM card port number associated with a particular event." ::= { d5VideoQamLogEntry 4 } d5vQamLogQamNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "QAM card QAM number associated with a particular event." ::= { d5VideoQamLogEntry 5 } d5vQamLogState OBJECT-TYPE SYNTAX D5VideoQamLogQamState MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the Event Log" ::= { d5VideoQamLogEntry 6 } d5vQamLogDuration OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Event Log duration in mSecs (only valid for START/STOP type entries)" ::= { d5VideoQamLogEntry 7 } d5vQamLogDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "QAM event description." ::= { d5VideoQamLogEntry 8 } -- ----------------------------------------- -- video-si-stream Ghost PID tables -- ----------------------------------------- d5VideoRuleSiStreamGhostPidFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoRuleSiStreamGhostPidFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains list of configured ghost PID filter rules. . Ghost PIDs can only be used for video-si-streams. The reason for this being that it's not reasonable to map multiple copies of the same input PID to a single output PID. Tying ghost-pids to video-si-stream ensures that only one copy of a particular ghost-pid will be mapped to any particular QAM-channel at any one time, since only one video-si-stream can be active on a QAM-channel at a time. " ::= { d5VideoObjects 42 } d5VideoRuleSiStreamGhostPidFilterEntry OBJECT-TYPE SYNTAX D5VideoRuleSiStreamGhostPidFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vPidRemapInPidIndex } ::= { d5VideoRuleSiStreamGhostPidFilterTable 1 } D5VideoRuleSiStreamGhostPidFilterEntry ::= SEQUENCE { d5vRSiStreamGhostPidFiltRowStatus RowStatus, d5vRSiStreamGhostPidFiltLastMatchTime TimeStamp, d5vRSiStreamGhostPidFiltMatchCount Counter32, d5vRSiStreamGhostPidFiltPersistence D5PersistenceType } d5vRSiStreamGhostPidFiltRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus for controlling entries in this table." ::= { d5VideoRuleSiStreamGhostPidFilterEntry 1 } d5vRSiStreamGhostPidFiltLastMatchTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleSiStreamGhostPidFilterEntry 2 } d5vRSiStreamGhostPidFiltMatchCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this rule was matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleSiStreamGhostPidFilterEntry 3 } d5vRSiStreamGhostPidFiltPersistence OBJECT-TYPE SYNTAX D5PersistenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. " DEFVAL { nonVolatile } ::= { d5VideoRuleSiStreamGhostPidFilterEntry 4 } d5VideoRuleQamSiStreamGhostPidFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoRuleQamSiStreamGhostPidFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains list of qam-channel based configured ghost PID rules . Ghost PIDs can only be used for video-si-streams. The reason for this being that it's not reasonable to map multiple copies of the same input PID to a single output PID. Tying ghost-pids to video-si-stream ensures that only one copy of a particular ghost-pid will be mapped to any particular QAM-channel at any one time, since only one video-si-stream can be active on a QAM-channel at a time. " ::= { d5VideoObjects 41 } d5VideoRuleQamSiStreamGhostPidFilterEntry OBJECT-TYPE SYNTAX D5VideoRuleQamSiStreamGhostPidFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex, d5vPidRemapInPidIndex } ::= { d5VideoRuleQamSiStreamGhostPidFilterTable 1 } D5VideoRuleQamSiStreamGhostPidFilterEntry ::= SEQUENCE { d5vRQamSiStreamGhostPidFiltRowStatus RowStatus, d5vRQamSiStreamGhostPidFiltLastMatchTime TimeStamp, d5vRQamSiStreamGhostPidFiltMatchCount Counter32, d5vRQamSiStreamGhostPidFiltPersistence D5PersistenceType } d5vRQamSiStreamGhostPidFiltRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus for controlling entries in this table." ::= { d5VideoRuleQamSiStreamGhostPidFilterEntry 1 } d5vRQamSiStreamGhostPidFiltLastMatchTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleQamSiStreamGhostPidFilterEntry 2 } d5vRQamSiStreamGhostPidFiltMatchCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this rule was matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleQamSiStreamGhostPidFilterEntry 3 } d5vRQamSiStreamGhostPidFiltPersistence OBJECT-TYPE SYNTAX D5PersistenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. " DEFVAL { nonVolatile } ::= { d5VideoRuleQamSiStreamGhostPidFilterEntry 4 } -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- QAM ca-system-id descriptor filter tables -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- d5VideoQamCaDescFiltTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoQamCaDescFiltEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This Table contains a list of rules that regulate the filtering of ca-descriptors from input CAT and PMT tables based on specific ca-system-id values. ." ::= { d5VideoObjects 43 } d5VideoQamCaDescFiltEntry OBJECT-TYPE SYNTAX D5VideoQamCaDescFiltEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vQamCaDescFiltIfIndex, d5vQamCaDescFiltSysId } ::= { d5VideoQamCaDescFiltTable 1 } D5VideoQamCaDescFiltEntry ::= SEQUENCE { d5vQamCaDescFiltIfIndex InterfaceIndexOrZero, d5vQamCaDescFiltSysId Unsigned32, d5vQamCaDescFiltCaDesc INTEGER, d5vQamCaDescFiltRowStatus RowStatus, d5vQamCaDescFiltPersistence D5PersistenceType } d5vQamCaDescFiltIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex of the QAM channel associated with this rule. (may be set to 0 to indicated an unspecified value)" ::= { d5VideoQamCaDescFiltEntry 1 } d5vQamCaDescFiltSysId OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The CA-system-ID value associated with this rule." ::= { d5VideoQamCaDescFiltEntry 2 } d5vQamCaDescFiltCaDesc OBJECT-TYPE SYNTAX INTEGER { cat-and-pmt(1), neither(2), cat-only(3), pmt-only(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Controls the filtering of descriptors from the CAT table." DEFVAL { neither } ::= { d5VideoQamCaDescFiltEntry 3 } d5vQamCaDescFiltRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus for controlling entries in this table." ::= { d5VideoQamCaDescFiltEntry 4 } d5vQamCaDescFiltPersistence OBJECT-TYPE SYNTAX D5PersistenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. " DEFVAL { nonVolatile } ::= { d5VideoQamCaDescFiltEntry 5 } -- ----------------------------------------- -- video-stream Ghost PID tables -- ----------------------------------------- d5VideoRuleStreamGhostPidTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoRuleStreamGhostPidFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains list of configured ghost PID filter rules. Ghost PIDs may only be used for video-streams and can be in the range 1 to 8190. Care must be taken not to map multiple copies of the same input PID to a single output PID. " ::= { d5VideoObjects 45 } d5VideoRuleStreamGhostPidFilterEntry OBJECT-TYPE SYNTAX D5VideoRuleStreamGhostPidFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { d5vRStreamGhostPidFiltUdpIndex, d5vRStreamGhostPidFiltIpSrcIndex, d5vRStreamGhostPidFiltIpDestIndex, d5vRStreamGhostPidFiltInPidIndex} ::= { d5VideoRuleStreamGhostPidTable 1 } D5VideoRuleStreamGhostPidFilterEntry ::= SEQUENCE { d5vRStreamGhostPidFiltUdpIndex Unsigned32, d5vRStreamGhostPidFiltIpSrcIndex IpAddress, d5vRStreamGhostPidFiltIpDestIndex IpAddress, d5vRStreamGhostPidFiltInPidIndex D5PID, d5vRStreamGhostPidFiltRowStatus RowStatus, d5vRStreamGhostPidFiltMatchLastTime TimeStamp, d5vRStreamGhostPidFiltMatchCount Counter32, d5vRStreamGhostPidFiltPersistence D5PersistenceType } d5vRStreamGhostPidFiltUdpIndex OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The destination UDP Port of the incoming TS.(A value of 0 in a rule means that the udp-port can be ANY value for pattern-matching)" ::= { d5VideoRuleStreamGhostPidFilterEntry 1 } d5vRStreamGhostPidFiltIpSrcIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The SRC IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching rules)" ::= { d5VideoRuleStreamGhostPidFilterEntry 2 } d5vRStreamGhostPidFiltIpDestIndex OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The DEST IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching rules)" ::= { d5VideoRuleStreamGhostPidFilterEntry 3 } d5vRStreamGhostPidFiltInPidIndex OBJECT-TYPE SYNTAX D5PID MAX-ACCESS read-create STATUS current DESCRIPTION "The incoming ghost PID value related to this rule." ::= { d5VideoRuleStreamGhostPidFilterEntry 4 } d5vRStreamGhostPidFiltRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus for controlling entries in this table." ::= { d5VideoRuleStreamGhostPidFilterEntry 5 } d5vRStreamGhostPidFiltMatchLastTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleStreamGhostPidFilterEntry 6 } d5vRStreamGhostPidFiltMatchCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this rule was matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleStreamGhostPidFilterEntry 7 } d5vRStreamGhostPidFiltPersistence OBJECT-TYPE SYNTAX D5PersistenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. " DEFVAL { nonVolatile } ::= { d5VideoRuleStreamGhostPidFilterEntry 8 } d5VideoRuleQamStreamGhostPidTable OBJECT-TYPE SYNTAX SEQUENCE OF D5VideoRuleQamStreamGhostPidFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains list of qam-channel based configured ghost PID rules. Ghost PIDs may only be used for video-streams and can be in the range 1 to 8190. Care must be taken not to map multiple copies of the same input PID to a single output PID. " ::= { d5VideoObjects 44 } d5VideoRuleQamStreamGhostPidFilterEntry OBJECT-TYPE SYNTAX D5VideoRuleQamStreamGhostPidFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex, d5vRStreamGhostPidFiltInPidIndex } ::= { d5VideoRuleQamStreamGhostPidTable 1 } D5VideoRuleQamStreamGhostPidFilterEntry ::= SEQUENCE { d5vRQamStreamGhostPidFiltRowStatus RowStatus, d5vRQamStreamGhostPidFiltOutPid D5PID, d5vRQamStreamGhostPidFiltLastMatchTime TimeStamp, d5vRQamStreamGhostPidFiltMatchCount Counter32, d5vRQamStreamGhostPidFiltPersistence D5PersistenceType } d5vRQamStreamGhostPidFiltRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The RowStatus for controlling entries in this table." ::= { d5VideoRuleQamStreamGhostPidFilterEntry 1 } d5vRQamStreamGhostPidFiltOutPid OBJECT-TYPE SYNTAX D5PID MAX-ACCESS read-create STATUS current DESCRIPTION "The output PID value related to this rule." ::= { d5VideoRuleQamStreamGhostPidFilterEntry 2 } d5vRQamStreamGhostPidFiltLastMatchTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleQamStreamGhostPidFilterEntry 3 } d5vRQamStreamGhostPidFiltMatchCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this rule was matched/used at run-time. Zero if not-applicable." ::= { d5VideoRuleQamStreamGhostPidFilterEntry 4 } d5vRQamStreamGhostPidFiltPersistence OBJECT-TYPE SYNTAX D5PersistenceType MAX-ACCESS read-create STATUS current DESCRIPTION "This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. " DEFVAL { nonVolatile } ::= { d5VideoRuleQamStreamGhostPidFilterEntry 5 } END