--- ArubaOS 8.8.0.1_80393 WLSR-AP-MIB DEFINITIONS ::= BEGIN IMPORTS TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-IDENTITY, OBJECT-TYPE, snmpModules, Integer32, Counter32, IpAddress, NOTIFICATION-TYPE FROM SNMPv2-SMI TDomain, DisplayString, PhysAddress, TAddress, TimeInterval, RowStatus, StorageType, TestAndIncr, MacAddress, TruthValue FROM SNMPv2-TC OBJECT-GROUP FROM SNMPv2-CONF wlsrEnterpriseMibModules FROM ARUBA-MIB; wlsrMIB MODULE-IDENTITY LAST-UPDATED "202008141745Z" ORGANIZATION "Aruba, a Hewlett Packard Enterprise company" CONTACT-INFO "Postal: 3333 Scott Blvd, Santa Clara, CA 95054 E-mail: aruba-ext-eng-reg@hpe.com Phone: 408 227 4500 Fax: 408 752 0626" DESCRIPTION "This MIB is for managing the Access Points and Air Monitors. " REVISION "202008141745Z" DESCRIPTION "The initial revision." ::= { wlsrEnterpriseMibModules 1 } wlsrConfigGroup OBJECT IDENTIFIER ::= { wlsrMIB 1 } wlsrStatsGroup OBJECT IDENTIFIER ::= { wlsrMIB 3 } wlsrAirMonitorGroup OBJECT IDENTIFIER ::= { wlsrMIB 4 } wlsrTrapsGroup OBJECT IDENTIFIER ::= { wlsrMIB 100 } -- wlsrConfigGroup contains objects to describe the Current AP -- Configuration. -- wlsrConfigTable contains all the configuration data of an AP. -- Each row in the table will represent a wifi interface. wlsrConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsrConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Table will list the configuration data of a wifi interface. " ::= { wlsrConfigGroup 1 } wlsrConfigEntry OBJECT-TYPE SYNTAX WlsrConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A Wifi configuration entry " INDEX { wlsrBSSID } ::= { wlsrConfigTable 1 } WlsrConfigEntry ::= SEQUENCE { wlsrBSSID MacAddress, wlsrESSID DisplayString, wlsrMode INTEGER, wlsrCurrentChannel INTEGER, wlsrTxPower Integer32, wlsrRTSThreshold INTEGER , wlsrRetryLimit INTEGER , wlsrPreamble INTEGER , wlsrBeaconInterval INTEGER , wlsrPowerMgmt INTEGER , wlsrLoadBalance INTEGER , wlsrSupportedRates BITS , wlsrDTIMPeriod INTEGER , wlsrLMSAddress IpAddress , wlsrEncryption BITS , wlsrStatus TruthValue , wlsrAgeout Integer32 , wlsrMTU INTEGER , wlsrLocation DisplayString , wlsrHideSSID TruthValue , wlsrDenyBroadcast TruthValue, wlsrBGmode INTEGER , wlsrCardType INTEGER , wlsrRegDomain Integer32 , wlsrCountryCode DisplayString, wlsrTxRates BITS } wlsrBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " BSSID of the WIFI Interface " ::= { wlsrConfigEntry 1 } wlsrESSID OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION " ESSID of the WIFI Interface " ::= { wlsrConfigEntry 2 } wlsrMode OBJECT-TYPE SYNTAX INTEGER { master(1), adhoc(2), monitor(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " Mode of the Access Point. Master indicates that we are operating as Access Point. monitor indicates that the AP is an Air Monitor. " ::= { wlsrConfigEntry 3 } wlsrCurrentChannel OBJECT-TYPE SYNTAX INTEGER (1..165) MAX-ACCESS read-only STATUS current DESCRIPTION " The current operating frequency channel of the DSSS PHY. " ::= { wlsrConfigEntry 4 } wlsrTxPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Transmit power of the Access point. The value is between 0 ... 4 " ::= { wlsrConfigEntry 5 } wlsrRTSThreshold OBJECT-TYPE SYNTAX INTEGER (0..2347) MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. " ::= { wlsrConfigEntry 6 } wlsrRetryLimit OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute shall indicate the maximum number of transmission attempts of a frame, the length of which is less than or equal to dot11RTSThreshold, that shall be made before a failure condition is indicated. The default value of this attribute shall be 7. " ::= { wlsrConfigEntry 7 } wlsrPreamble OBJECT-TYPE SYNTAX INTEGER { short(1), long(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " The current radio preamble type in use by the wifi interface. " ::= { wlsrConfigEntry 8 } wlsrBeaconInterval OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION " This object shall specify the number of TU that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames. " ::= { wlsrConfigEntry 9 } wlsrPowerMgmt OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates whether Power Management is enabled or not. " ::= { wlsrConfigEntry 10 } wlsrLoadBalance OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates if load balancing is enabled or disabled. " ::= { wlsrConfigEntry 11 } wlsrSupportedRates OBJECT-TYPE SYNTAX BITS { unused0(0), unused1(1), unused2(2), unused3(3), rate54Mbps(4), rate48Mbps(5), rate36Mbps(6), rate24Mbps(7), rate18Mbps(8), rate12Mbps(9), rate9Mbps(10), rate6Mbps(11), rate11Mbps(12), rate5Mbps(13), rate2Mbps(14), rate1Mbps(15) } MAX-ACCESS read-only STATUS current DESCRIPTION " Basic Bit rates supported by this WIFI interface. " ::= { wlsrConfigEntry 12 } wlsrDTIMPeriod OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon frames. " ::= { wlsrConfigEntry 13 } wlsrLMSAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the IP Address of the Local switch that the AP is connected to. " ::= { wlsrConfigEntry 14 } wlsrEncryption OBJECT-TYPE SYNTAX BITS{ unused0(0), unused1(1), unused2(2), unused3(3), unused4(4), unused5(5), unused6(6), xSec(7), wpa2PreAuth(8), aes8021x(9), aesPSK(10), dynamicTkip(11), staticTkip(12), dynamicWep(13), staticWep(14), disabled(15) } MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the Encryption type of the WIFI interface. " ::= { wlsrConfigEntry 15 } wlsrStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the status of the WIFI Interface. " ::= { wlsrConfigEntry 17 } wlsrAgeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the ageout value in seconds. " ::= { wlsrConfigEntry 18 } wlsrMTU OBJECT-TYPE SYNTAX INTEGER (0..2347) MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the MTU of the WIFI Interface. " ::= { wlsrConfigEntry 19 } wlsrLocation OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the Location of the Access Point in Building.Floor.location format. " ::= { wlsrConfigEntry 20 } wlsrHideSSID OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates if SSID is hidden or not. " ::= { wlsrConfigEntry 21 } wlsrDenyBroadcast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " A True value indicates that Broadcast is disabled. " ::= { wlsrConfigEntry 22 } wlsrBGmode OBJECT-TYPE SYNTAX INTEGER{ bgMixed(1), bOnly(2), gOnly(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " This attributes indicates the mode of the WIFI Interface " ::= { wlsrConfigEntry 23 } wlsrCardType OBJECT-TYPE SYNTAX INTEGER { noCard(1), intersil(2), atherosA(3), atherosBG(4), atherosABG(5), ar5212A(10), ar5212BG(11), ar5212ABG(12) } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the type of the radio card. " ::= { wlsrConfigEntry 24 } wlsrRegDomain OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION " This Object represents the configured Regulatory Domain this AP will adhere to. 1 -- US 2 -- JAPAN 3 -- EU 4 -- EU2 5 -- EU3 6 -- KOREA 7 -- CHINA 8 -- France 9 -- Singapore 10 -- MALAY 11 -- BRAZIL 12 -- Taiwan 13 -- Czech Republic 14 -- GR 15 -- South Africa 16 -- Argentina 17 -- Australia 18 -- Chile " ::= { wlsrConfigEntry 25 } wlsrCountryCode OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION " This Object represents the configured Country code . " ::= { wlsrConfigEntry 26 } wlsrTxRates OBJECT-TYPE SYNTAX BITS { unused0(0), unused1(1), unused2(2), unused3(3), rate54Mbps(4), rate48Mbps(5), rate36Mbps(6), rate24Mbps(7), rate18Mbps(8), rate12Mbps(9), rate9Mbps(10), rate6Mbps(11), rate11Mbps(12), rate5Mbps(13), rate2Mbps(14), rate1Mbps(15) } MAX-ACCESS read-only STATUS current DESCRIPTION " Transmit Bit rates supported by this WIFI interface. " ::= { wlsrConfigEntry 27 } -- wlsrStatsGroup All the Statistics stored by the Access Point. -- Channel Statistics Group contains all the statistics related to -- a channel. -- wlsrChannelStatsTable will contain all the Aggregate statistics collected -- on a channel wlsrStatsChannelGroup OBJECT IDENTIFIER ::= { wlsrStatsGroup 3 } wlsrChannelStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsrChannelStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Table contains the Channel Statistics. " ::= { wlsrStatsChannelGroup 1 } wlsrChannelStatsEntry OBJECT-TYPE SYNTAX WlsrChannelStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Channel Statistics Table" INDEX { wlsrChStatsChannel} ::= { wlsrChannelStatsTable 1 } WlsrChannelStatsEntry ::= SEQUENCE { wlsrChStatsChannel INTEGER , wlsrChStatsNumAPs Integer32 , wlsrChStatsNumStations Integer32 , wlsrChStatsTotPkts Counter32 , wlsrChStatsTotBytes Counter32 , wlsrChStatsTotRetryPkts Counter32 , wlsrChStatsTotFragmentedPkts Counter32 , wlsrChStatsTotPhyErrPkts Counter32 , wlsrChStatsTotMacErrPkts Counter32 , wlsrChStatsFrameErrorRate Integer32 , wlsrChStatsFrameRetryRate Integer32 , wlsrChStatsFrameLowSpeedRate Integer32 , wlsrChStatsFrameNonUnicastRate Integer32 , wlsrChStatsFrameBandwidthRate Integer32 , wlsrChStatsFrameFragmentationRate Integer32 , wlsrChStatsMonitoredTime TimeTicks } wlsrChStatsChannel OBJECT-TYPE SYNTAX INTEGER (1..165) MAX-ACCESS not-accessible STATUS current DESCRIPTION " The frequency Channel on which these statistics are collected. " ::= { wlsrChannelStatsEntry 1 } wlsrChStatsNumAPs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of APs using this channel. " ::= { wlsrChannelStatsEntry 2 } wlsrChStatsNumStations OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of stations using this channel. " ::= { wlsrChannelStatsEntry 3 } wlsrChStatsTotPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total packets observed on this channel. " ::= { wlsrChannelStatsEntry 4 } wlsrChStatsTotBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total Bytes observed on this channel. " ::= { wlsrChannelStatsEntry 5 } wlsrChStatsTotRetryPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total Retry Packets observed on this channel. " ::= { wlsrChannelStatsEntry 6 } wlsrChStatsTotFragmentedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total Fragmented Packets observed on this channel. " ::= { wlsrChannelStatsEntry 7 } wlsrChStatsTotPhyErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total Physical Error Packets observed on this channel. " ::= { wlsrChannelStatsEntry 8 } wlsrChStatsTotMacErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total Mac errors packets observed on this channel. " ::= { wlsrChannelStatsEntry 9 } wlsrChStatsFrameErrorRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Frame errors as a percentage of total frames on this channel. " ::= { wlsrChannelStatsEntry 10 } wlsrChStatsFrameRetryRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The Frame Retry Rate " ::= { wlsrChannelStatsEntry 11 } wlsrChStatsFrameLowSpeedRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Frame Low speed error rate in kbps. " ::= { wlsrChannelStatsEntry 12 } wlsrChStatsFrameNonUnicastRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Frame non Unicast rate in kbps. " ::= { wlsrChannelStatsEntry 13 } wlsrChStatsFrameBandwidthRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Frame Bandwidth rate in kbps. " ::= { wlsrChannelStatsEntry 14 } wlsrChStatsFrameFragmentationRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Frame Fragmentation Rate in kbps. " ::= { wlsrChannelStatsEntry 15 } wlsrChStatsMonitoredTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " Time in ticks, since we were observing this channel. " ::= { wlsrChannelStatsEntry 16 } -- This table breaks down the channel statistics observed into different -- rate categories. wlsrChannelRateStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsrChannelRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the per channel Packet and Byte Counts but represented in terms of rate categories. " ::= { wlsrStatsChannelGroup 2 } wlsrChannelRateStatsEntry OBJECT-TYPE SYNTAX WlsrChannelRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Channel Rate Statistics." INDEX { wlsrChStatsChannel} ::= { wlsrChannelRateStatsTable 1 } WlsrChannelRateStatsEntry ::= SEQUENCE { wlsrChStatsTotPktsAt1Mbps Counter32 , wlsrChStatsTotBytesAt1Mbps Counter32 , wlsrChStatsTotPktsAt2Mbps Counter32 , wlsrChStatsTotBytesAt2Mbps Counter32 , wlsrChStatsTotPktsAt5Mbps Counter32 , wlsrChStatsTotBytesAt5Mbps Counter32 , wlsrChStatsTotPktsAt11Mbps Counter32 , wlsrChStatsTotBytesAt11Mbps Counter32 , wlsrChStatsTotPktsAt6Mbps Counter32 , wlsrChStatsTotBytesAt6Mbps Counter32 , wlsrChStatsTotPktsAt12Mbps Counter32 , wlsrChStatsTotBytesAt12Mbps Counter32 , wlsrChStatsTotPktsAt18Mbps Counter32 , wlsrChStatsTotBytesAt18Mbps Counter32 , wlsrChStatsTotPktsAt24Mbps Counter32 , wlsrChStatsTotBytesAt24Mbps Counter32 , wlsrChStatsTotPktsAt36Mbps Counter32 , wlsrChStatsTotBytesAt36Mbps Counter32 , wlsrChStatsTotPktsAt48Mbps Counter32 , wlsrChStatsTotBytesAt48Mbps Counter32 , wlsrChStatsTotPktsAt54Mbps Counter32 , wlsrChStatsTotBytesAt54Mbps Counter32 } wlsrChStatsTotPktsAt1Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this channel at 1Mbps rate. " ::= { wlsrChannelRateStatsEntry 1 } wlsrChStatsTotBytesAt1Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this channel at 1Mbps rate. " ::= { wlsrChannelRateStatsEntry 2 } wlsrChStatsTotPktsAt2Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this channel at 2Mbps rate. " ::= { wlsrChannelRateStatsEntry 3 } wlsrChStatsTotBytesAt2Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this channel at 2Mbps rate. " ::= { wlsrChannelRateStatsEntry 4 } wlsrChStatsTotPktsAt5Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this channel at 5Mbps rate. " ::= { wlsrChannelRateStatsEntry 5 } wlsrChStatsTotBytesAt5Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this channel at 5Mbps rate. " ::= { wlsrChannelRateStatsEntry 6 } wlsrChStatsTotPktsAt11Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this channel at 11Mbps rate. " ::= { wlsrChannelRateStatsEntry 7 } wlsrChStatsTotBytesAt11Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this channel at 11Mbps rate. " ::= { wlsrChannelRateStatsEntry 8 } wlsrChStatsTotPktsAt6Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this channel at 6Mbps rate. " ::= { wlsrChannelRateStatsEntry 9 } wlsrChStatsTotBytesAt6Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this channel at 6Mbps rate. " ::= { wlsrChannelRateStatsEntry 10 } wlsrChStatsTotPktsAt12Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this channel at 12Mbps rate. " ::= { wlsrChannelRateStatsEntry 11 } wlsrChStatsTotBytesAt12Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this channel at 12Mbps rate. " ::= { wlsrChannelRateStatsEntry 12 } wlsrChStatsTotPktsAt18Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this channel at 18Mbps rate. " ::= { wlsrChannelRateStatsEntry 13 } wlsrChStatsTotBytesAt18Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this channel at 18Mbps rate. " ::= { wlsrChannelRateStatsEntry 14 } wlsrChStatsTotPktsAt24Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this channel at 24Mbps rate. " ::= { wlsrChannelRateStatsEntry 15 } wlsrChStatsTotBytesAt24Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this channel at 24Mbps rate. " ::= { wlsrChannelRateStatsEntry 16 } wlsrChStatsTotPktsAt36Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this channel at 36Mbps rate. " ::= { wlsrChannelRateStatsEntry 17 } wlsrChStatsTotBytesAt36Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this channel at 36Mbps rate. " ::= { wlsrChannelRateStatsEntry 18 } wlsrChStatsTotPktsAt48Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this channel at 48Mbps rate. " ::= { wlsrChannelRateStatsEntry 19 } wlsrChStatsTotBytesAt48Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this channel at 48Mbps rate. " ::= { wlsrChannelRateStatsEntry 20 } wlsrChStatsTotPktsAt54Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed on this channel at 54Mbps rate. " ::= { wlsrChannelRateStatsEntry 21 } wlsrChStatsTotBytesAt54Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed on this channel at 54Mbps rate. " ::= { wlsrChannelRateStatsEntry 22 } -- This table breaks down the channel statistics observed based on the -- Destination Address Types. wlsrChannelDATypeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsrChannelDATypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the per channel Packet and Byte Counts but broken down in terms of Destination Address Type. " ::= { wlsrStatsChannelGroup 3 } wlsrChannelDATypeStatsEntry OBJECT-TYPE SYNTAX WlsrChannelDATypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Channel Statistics based on the Address Type." INDEX { wlsrChStatsChannel} ::= { wlsrChannelDATypeStatsTable 1 } WlsrChannelDATypeStatsEntry ::= SEQUENCE { wlsrChStatsTotDABroadcastPkts Counter32 , wlsrChStatsTotDABroadcastBytes Counter32 , wlsrChStatsTotDAMulticastPkts Counter32 , wlsrChStatsTotDAMulticastBytes Counter32 , wlsrChStatsTotDAUnicastPkts Counter32 , wlsrChStatsTotDAUnicastBytes Counter32 } wlsrChStatsTotDABroadcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Broadcast packets observed on this channel. " ::= { wlsrChannelDATypeStatsEntry 1 } wlsrChStatsTotDABroadcastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Broadcast Bytes observed on this channel. " ::= { wlsrChannelDATypeStatsEntry 2 } wlsrChStatsTotDAMulticastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Multicast packets observed on this channel. " ::= { wlsrChannelDATypeStatsEntry 3 } wlsrChStatsTotDAMulticastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Multicast Bytes observed on this channel. " ::= { wlsrChannelDATypeStatsEntry 4 } wlsrChStatsTotDAUnicastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Unicast packets observed on this channel. " ::= { wlsrChannelDATypeStatsEntry 5 } wlsrChStatsTotDAUnicastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Unicast Bytes observed on this channel. " ::= { wlsrChannelDATypeStatsEntry 6 } -- This table breaks down the channel statistics observed based on the -- the Type of the Packet. wlsrChannelFrameTypeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsrChannelFrameTypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the per channel Packet and Byte Counts but broken down into different Frame Types. " ::= { wlsrStatsChannelGroup 4 } wlsrChannelFrameTypeStatsEntry OBJECT-TYPE SYNTAX WlsrChannelFrameTypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Channel Statistics based on Frame Type." INDEX { wlsrChStatsChannel} ::= { wlsrChannelFrameTypeStatsTable 1 } WlsrChannelFrameTypeStatsEntry ::= SEQUENCE { wlsrChStatsTotMgmtPkts Counter32 , wlsrChStatsTotMgmtBytes Counter32 , wlsrChStatsTotCtrlPkts Counter32 , wlsrChStatsTotCtrlBytes Counter32 , wlsrChStatsTotDataPkts Counter32 , wlsrChStatsTotDataBytes Counter32 } wlsrChStatsTotMgmtPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Management packets observed on this channel. " ::= { wlsrChannelFrameTypeStatsEntry 1 } wlsrChStatsTotMgmtBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Management Bytes observed on this channel. " ::= { wlsrChannelFrameTypeStatsEntry 2 } wlsrChStatsTotCtrlPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Control packets observed on this channel. " ::= { wlsrChannelFrameTypeStatsEntry 3 } wlsrChStatsTotCtrlBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Control Bytes observed on this channel. " ::= { wlsrChannelFrameTypeStatsEntry 4 } wlsrChStatsTotDataPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Data packets observed on this channel. " ::= { wlsrChannelFrameTypeStatsEntry 5 } wlsrChStatsTotDataBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Data Bytes observed on this channel. " ::= { wlsrChannelFrameTypeStatsEntry 6 } -- This table breaks down the channel statistics observed into packet size -- buckets. wlsrChannelPktSizeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsrChannelPktSizeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the per channel Packet and Byte Counts but broken down into different Packet Sizes. " ::= { wlsrStatsChannelGroup 5 } wlsrChannelPktSizeStatsEntry OBJECT-TYPE SYNTAX WlsrChannelPktSizeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Channel Statistics based on the packet sizes." INDEX { wlsrChStatsChannel} ::= { wlsrChannelPktSizeStatsTable 1 } WlsrChannelPktSizeStatsEntry ::= SEQUENCE { wlsrChStatsPkts63Bytes Counter32 , wlsrChStatsPkts64To127 Counter32 , wlsrChStatsPkts128To255 Counter32 , wlsrChStatsPkts256To511 Counter32 , wlsrChStatsPkts512To1023 Counter32 , wlsrChStatsPkts1024To1518 Counter32 } wlsrChStatsPkts63Bytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets that were less than 64 bytes long. " ::= { wlsrChannelPktSizeStatsEntry 1 } wlsrChStatsPkts64To127 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets that were between 64 and 127 bytes long. " ::= { wlsrChannelPktSizeStatsEntry 2 } wlsrChStatsPkts128To255 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets that were between 128 and 255 bytes long. " ::= { wlsrChannelPktSizeStatsEntry 3 } wlsrChStatsPkts256To511 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets that were between 256 and 511 bytes long. " ::= { wlsrChannelPktSizeStatsEntry 4 } wlsrChStatsPkts512To1023 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets that were between 512 and 1023 bytes long. " ::= { wlsrChannelPktSizeStatsEntry 5 } wlsrChStatsPkts1024To1518 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets that were between 1024 and 1518 bytes long. " ::= { wlsrChannelPktSizeStatsEntry 6 } -- Station Statistics Group contains all the statistics related to -- a Station. -- wlsrStaStatsTable will contain all the Aggregate statistics collected -- for a Station wlsrStatsStaGroup OBJECT IDENTIFIER ::= { wlsrStatsGroup 4 } wlsrStaStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsrStaStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This Table contains all the Aggregate statistics collected for a station. " ::= { wlsrStatsStaGroup 1 } wlsrStaStatsEntry OBJECT-TYPE SYNTAX WlsrStaStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Station Statistics." INDEX { wlsrStaAddress} ::= { wlsrStaStatsTable 1 } WlsrStaStatsEntry ::= SEQUENCE { wlsrStaAddress MacAddress , wlsrStaTxPkts Counter32 , wlsrStaTxBytes Counter32 , wlsrStaRxPkts Counter32 , wlsrStaRxBytes Counter32 , wlsrStaTxRetryPkts Counter32 , wlsrStaRxRetryPkts Counter32 , wlsrStaTxFragmentedPkts Counter32 , wlsrStaRxFragmentedPkts Counter32 , wlsrStaReceiveErrPkts Counter32 , wlsrStaTxTotSignal Integer32 , wlsrStaTxSignalPkts Counter32 , wlsrStaTxCurSignal Integer32 , wlsrStaTxHighSignal Integer32 , wlsrStaRxTotNoise Counter32 , wlsrStaRxNoisePkts Counter32 , wlsrStaRxCurrentNoise Integer32 , wlsrStaRxHighNoise Integer32 , wlsrStaRxLowNoise Integer32 , wlsrStaFrameRetryRate Integer32 , wlsrStaFrameLowSpeedRate Integer32 , wlsrStaFrameNonUnicastRate Integer32 , wlsrStaFrameRetryErrorRate Integer32 , wlsrStaFrameBandwidthRate Integer32 , wlsrStaFrameFragmentationRate Integer32 , wlsrStaFrameHighBandwidthRate Integer32 } wlsrStaAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " Mac Address of the Station connected to this Access Point. " ::= { wlsrStaStatsEntry 1 } wlsrStaTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total packets Transmitted to the Station. " ::= { wlsrStaStatsEntry 2 } wlsrStaTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total Bytes Transmitted to the Station. " ::= { wlsrStaStatsEntry 3 } wlsrStaRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total packets Received from the Station. " ::= { wlsrStaStatsEntry 4 } wlsrStaRxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total Bytes Received from the Station. " ::= { wlsrStaStatsEntry 5 } wlsrStaTxRetryPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the Retry Packets transmitted by the station " ::= { wlsrStaStatsEntry 6 } wlsrStaRxRetryPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the Retry Packets received from the station " ::= { wlsrStaStatsEntry 7 } wlsrStaTxFragmentedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the Fragmented Packets transmitted by the station. " ::= { wlsrStaStatsEntry 8 } wlsrStaRxFragmentedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the Fragmented Packets Received from the station. " ::= { wlsrStaStatsEntry 9 } wlsrStaReceiveErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total Error Packets received from this station. " ::= { wlsrStaStatsEntry 10 } wlsrStaTxTotSignal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The attribute indicates the total transmitted signal computed for this station. " ::= { wlsrStaStatsEntry 11 } wlsrStaTxSignalPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total Signal Packets transmitted by this station. " ::= { wlsrStaStatsEntry 12 } wlsrStaTxCurSignal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicate the stations current transmit signal strength. " ::= { wlsrStaStatsEntry 13 } wlsrStaTxHighSignal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicate the stations high transmit signal strength. " ::= { wlsrStaStatsEntry 14 } wlsrStaRxTotNoise OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Total Noise. " ::= { wlsrStaStatsEntry 15 } wlsrStaRxNoisePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Received Noise. " ::= { wlsrStaStatsEntry 16 } wlsrStaRxCurrentNoise OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Current Noise. " ::= { wlsrStaStatsEntry 17 } wlsrStaRxHighNoise OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION " High Noise " ::= { wlsrStaStatsEntry 18 } wlsrStaRxLowNoise OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Low Noise " ::= { wlsrStaStatsEntry 19 } wlsrStaFrameRetryRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Station Frame Retry Rate in kbps. " ::= { wlsrStaStatsEntry 20 } wlsrStaFrameLowSpeedRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Station Frame Low speed error rate in kbps. " ::= { wlsrStaStatsEntry 21 } wlsrStaFrameNonUnicastRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Station Frame Non Unicast rate in kbps. " ::= { wlsrStaStatsEntry 22 } wlsrStaFrameRetryErrorRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Station Frame Retry Error Rate in kbps. " ::= { wlsrStaStatsEntry 23 } wlsrStaFrameBandwidthRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Station Frame Bandwidth rate in kbps. " ::= { wlsrStaStatsEntry 24 } wlsrStaFrameFragmentationRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Station Frame Fragmentation Rate in kbps. " ::= { wlsrStaStatsEntry 25 } wlsrStaFrameHighBandwidthRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Station Frame High Bandwidth Rate in kbps. " ::= { wlsrStaStatsEntry 26 } -- This table breaks down the Station statistics into different -- rate categories. wlsrStaRateStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsrStaRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the per channel Packet and Byte Counts but represented in terms of rate categories. " ::= { wlsrStatsStaGroup 2 } wlsrStaRateStatsEntry OBJECT-TYPE SYNTAX WlsrStaRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Station Rate Stats Table" INDEX { wlsrStaAddress} ::= { wlsrStaRateStatsTable 1 } WlsrStaRateStatsEntry ::= SEQUENCE { wlsrStaTxPktsAt1Mbps Counter32 , wlsrStaTxBytesAt1Mbps Counter32 , wlsrStaTxPktsAt2Mbps Counter32 , wlsrStaTxBytesAt2Mbps Counter32 , wlsrStaTxPktsAt5Mbps Counter32 , wlsrStaTxBytesAt5Mbps Counter32 , wlsrStaTxPktsAt11Mbps Counter32 , wlsrStaTxBytesAt11Mbps Counter32 , wlsrStaTxPktsAt6Mbps Counter32 , wlsrStaTxBytesAt6Mbps Counter32 , wlsrStaTxPktsAt12Mbps Counter32 , wlsrStaTxBytesAt12Mbps Counter32 , wlsrStaTxPktsAt18Mbps Counter32 , wlsrStaTxBytesAt18Mbps Counter32 , wlsrStaTxPktsAt24Mbps Counter32 , wlsrStaTxBytesAt24Mbps Counter32 , wlsrStaTxPktsAt36Mbps Counter32 , wlsrStaTxBytesAt36Mbps Counter32 , wlsrStaTxPktsAt48Mbps Counter32 , wlsrStaTxBytesAt48Mbps Counter32 , wlsrStaTxPktsAt54Mbps Counter32 , wlsrStaTxBytesAt54Mbps Counter32 , wlsrStaRxPktsAt1Mbps Counter32 , wlsrStaRxBytesAt1Mbps Counter32 , wlsrStaRxPktsAt2Mbps Counter32 , wlsrStaRxBytesAt2Mbps Counter32 , wlsrStaRxPktsAt5Mbps Counter32 , wlsrStaRxBytesAt5Mbps Counter32 , wlsrStaRxPktsAt11Mbps Counter32 , wlsrStaRxBytesAt11Mbps Counter32 , wlsrStaRxPktsAt6Mbps Counter32 , wlsrStaRxBytesAt6Mbps Counter32 , wlsrStaRxPktsAt12Mbps Counter32 , wlsrStaRxBytesAt12Mbps Counter32 , wlsrStaRxPktsAt18Mbps Counter32 , wlsrStaRxBytesAt18Mbps Counter32 , wlsrStaRxPktsAt24Mbps Counter32 , wlsrStaRxBytesAt24Mbps Counter32 , wlsrStaRxPktsAt36Mbps Counter32 , wlsrStaRxBytesAt36Mbps Counter32 , wlsrStaRxPktsAt48Mbps Counter32 , wlsrStaRxBytesAt48Mbps Counter32 , wlsrStaRxPktsAt54Mbps Counter32 , wlsrStaRxBytesAt54Mbps Counter32 } wlsrStaTxPktsAt1Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmitted by the station at 1Mbps rate. " ::= { wlsrStaRateStatsEntry 1 } wlsrStaTxBytesAt1Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmitted by the station at 1Mbps rate. " ::= { wlsrStaRateStatsEntry 2 } wlsrStaTxPktsAt2Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmitted by the station at 2Mbps rate. " ::= { wlsrStaRateStatsEntry 3 } wlsrStaTxBytesAt2Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmitted by the station at 2Mbps rate. " ::= { wlsrStaRateStatsEntry 4 } wlsrStaTxPktsAt5Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmitted by the station at 5Mbps rate. " ::= { wlsrStaRateStatsEntry 5 } wlsrStaTxBytesAt5Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmitted by the station at 5Mbps rate. " ::= { wlsrStaRateStatsEntry 6 } wlsrStaTxPktsAt11Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmitted by the station at 11Mbps rate. " ::= { wlsrStaRateStatsEntry 7 } wlsrStaTxBytesAt11Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmitted by the station at 11Mbps rate. " ::= { wlsrStaRateStatsEntry 8 } wlsrStaTxPktsAt6Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmitted by the station at 6Mbps rate. " ::= { wlsrStaRateStatsEntry 9 } wlsrStaTxBytesAt6Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmitted by the station at 6Mbps rate. " ::= { wlsrStaRateStatsEntry 10 } wlsrStaTxPktsAt12Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmitted by the station at 12Mbps rate. " ::= { wlsrStaRateStatsEntry 11 } wlsrStaTxBytesAt12Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmitted by the station at 12Mbps rate. " ::= { wlsrStaRateStatsEntry 12 } wlsrStaTxPktsAt18Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmitted by the station at 18Mbps rate. " ::= { wlsrStaRateStatsEntry 13 } wlsrStaTxBytesAt18Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmitted by the station at 18Mbps rate. " ::= { wlsrStaRateStatsEntry 14 } wlsrStaTxPktsAt24Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmitted by the station at 24Mbps rate. " ::= { wlsrStaRateStatsEntry 15 } wlsrStaTxBytesAt24Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmitted by the station at 24Mbps rate. " ::= { wlsrStaRateStatsEntry 16 } wlsrStaTxPktsAt36Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmitted by the station at 36Mbps rate. " ::= { wlsrStaRateStatsEntry 17 } wlsrStaTxBytesAt36Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmitted by the station at 36Mbps rate. " ::= { wlsrStaRateStatsEntry 18 } wlsrStaTxPktsAt48Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmitted by the station at 48Mbps rate. " ::= { wlsrStaRateStatsEntry 19 } wlsrStaTxBytesAt48Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmitted by the station at 48Mbps rate. " ::= { wlsrStaRateStatsEntry 20 } wlsrStaTxPktsAt54Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmitted by the station at 54Mbps rate. " ::= { wlsrStaRateStatsEntry 21 } wlsrStaTxBytesAt54Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmitted by the station at 54Mbps rate. " ::= { wlsrStaRateStatsEntry 22 } wlsrStaRxPktsAt1Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 1Mbps rate. " ::= { wlsrStaRateStatsEntry 23 } wlsrStaRxBytesAt1Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 1Mbps rate. " ::= { wlsrStaRateStatsEntry 24 } wlsrStaRxPktsAt2Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 2Mbps rate. " ::= { wlsrStaRateStatsEntry 25 } wlsrStaRxBytesAt2Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 2Mbps rate. " ::= { wlsrStaRateStatsEntry 26 } wlsrStaRxPktsAt5Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 5Mbps rate. " ::= { wlsrStaRateStatsEntry 27 } wlsrStaRxBytesAt5Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 5Mbps rate. " ::= { wlsrStaRateStatsEntry 28 } wlsrStaRxPktsAt11Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 11Mbps rate. " ::= { wlsrStaRateStatsEntry 29 } wlsrStaRxBytesAt11Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 11Mbps rate. " ::= { wlsrStaRateStatsEntry 30 } wlsrStaRxPktsAt6Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 6Mbps rate. " ::= { wlsrStaRateStatsEntry 31 } wlsrStaRxBytesAt6Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 6Mbps rate. " ::= { wlsrStaRateStatsEntry 32 } wlsrStaRxPktsAt12Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 12Mbps rate. " ::= { wlsrStaRateStatsEntry 33 } wlsrStaRxBytesAt12Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 12Mbps rate. " ::= { wlsrStaRateStatsEntry 34 } wlsrStaRxPktsAt18Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 18Mbps rate. " ::= { wlsrStaRateStatsEntry 35 } wlsrStaRxBytesAt18Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 18Mbps rate. " ::= { wlsrStaRateStatsEntry 36 } wlsrStaRxPktsAt24Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 24Mbps rate. " ::= { wlsrStaRateStatsEntry 37 } wlsrStaRxBytesAt24Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 24Mbps rate. " ::= { wlsrStaRateStatsEntry 38 } wlsrStaRxPktsAt36Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 36Mbps rate. " ::= { wlsrStaRateStatsEntry 39 } wlsrStaRxBytesAt36Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 36Mbps rate. " ::= { wlsrStaRateStatsEntry 40 } wlsrStaRxPktsAt48Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 48Mbps rate. " ::= { wlsrStaRateStatsEntry 41 } wlsrStaRxBytesAt48Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 48Mbps rate. " ::= { wlsrStaRateStatsEntry 42 } wlsrStaRxPktsAt54Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 54Mbps rate. " ::= { wlsrStaRateStatsEntry 43 } wlsrStaRxBytesAt54Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 54Mbps rate. " ::= { wlsrStaRateStatsEntry 44 } -- This table breaks down the Station statistics based on the -- Destination Address Types. wlsrStaDATypeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsrStaDATypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the per channel Packet and Byte Counts but broken down in terms of Destination Address Type. " ::= { wlsrStatsStaGroup 3 } wlsrStaDATypeStatsEntry OBJECT-TYPE SYNTAX WlsrStaDATypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Station Statistics based on the Destination Address Type." INDEX { wlsrStaAddress} ::= { wlsrStaDATypeStatsTable 1 } WlsrStaDATypeStatsEntry ::= SEQUENCE { wlsrStaTxDABroadcastPkts Counter32 , wlsrStaTxDABroadcastBytes Counter32 , wlsrStaTxDAMulticastPkts Counter32 , wlsrStaTxDAMulticastBytes Counter32 , wlsrStaTxDAUnicastPkts Counter32 , wlsrStaTxDAUnicastBytes Counter32 } wlsrStaTxDABroadcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Broadcast packets transmitted by this Station. " ::= { wlsrStaDATypeStatsEntry 1 } wlsrStaTxDABroadcastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Broadcast Bytes transmitted by this Station. " ::= { wlsrStaDATypeStatsEntry 2 } wlsrStaTxDAMulticastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Multicast packets transmitted by this station. " ::= { wlsrStaDATypeStatsEntry 3 } wlsrStaTxDAMulticastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Multicast Bytes transmitted by this station. " ::= { wlsrStaDATypeStatsEntry 4 } wlsrStaTxDAUnicastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total of Unicast packets transmitted by this station. " ::= { wlsrStaDATypeStatsEntry 5 } wlsrStaTxDAUnicastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total of Unicast Bytes transmitted by this station. " ::= { wlsrStaDATypeStatsEntry 6 } -- This table breaks down the Station statistics based on the -- the Type of the Packet. wlsrStaFrameTypeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsrStaFrameTypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the per channel Packet and Byte Counts but broken down into different Frame Types. " ::= { wlsrStatsStaGroup 4 } wlsrStaFrameTypeStatsEntry OBJECT-TYPE SYNTAX WlsrStaFrameTypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Station Frame Type Stats Entry." INDEX { wlsrStaAddress} ::= { wlsrStaFrameTypeStatsTable 1 } WlsrStaFrameTypeStatsEntry ::= SEQUENCE { wlsrStaTxMgmtPkts Counter32 , wlsrStaTxMgmtBytes Counter32 , wlsrStaTxCtrlPkts Counter32 , wlsrStaTxCtrlBytes Counter32 , wlsrStaTxDataPkts Counter32 , wlsrStaTxDataBytes Counter32 , wlsrStaRxMgmtPkts Counter32 , wlsrStaRxMgmtBytes Counter32 , wlsrStaRxCtrlPkts Counter32 , wlsrStaRxCtrlBytes Counter32 , wlsrStaRxDataPkts Counter32 , wlsrStaRxDataBytes Counter32 } wlsrStaTxMgmtPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the Transmitted Management packets from a station. " ::= { wlsrStaFrameTypeStatsEntry 1 } wlsrStaTxMgmtBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the Transmitted Management Bytes from a station " ::= { wlsrStaFrameTypeStatsEntry 2 } wlsrStaTxCtrlPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the Transmitted Control packets from a station " ::= { wlsrStaFrameTypeStatsEntry 3 } wlsrStaTxCtrlBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the Transmitted Control Bytes from a station " ::= { wlsrStaFrameTypeStatsEntry 4 } wlsrStaTxDataPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the Transmitted Data packets from a station " ::= { wlsrStaFrameTypeStatsEntry 5 } wlsrStaTxDataBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the Transmitted Data Bytes observed on this channel. " ::= { wlsrStaFrameTypeStatsEntry 6 } wlsrStaRxMgmtPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of received Management packets at a station. " ::= { wlsrStaFrameTypeStatsEntry 7 } wlsrStaRxMgmtBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of received Management Bytes at a station. " ::= { wlsrStaFrameTypeStatsEntry 8 } wlsrStaRxCtrlPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of received Control packets at a station. " ::= { wlsrStaFrameTypeStatsEntry 9 } wlsrStaRxCtrlBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of received Control Bytes at a station. " ::= { wlsrStaFrameTypeStatsEntry 10 } wlsrStaRxDataPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of received Data packets at a station. " ::= { wlsrStaFrameTypeStatsEntry 11 } wlsrStaRxDataBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of received Data Bytes at a station. " ::= { wlsrStaFrameTypeStatsEntry 12 } -- This table breaks down the Station statistics received or transmitted by a -- station into packet size buckets. wlsrStaPktSizeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsrStaPktSizeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the per channel Packet and Byte Counts but broken down into different Packet Sizes. " ::= { wlsrStatsStaGroup 5 } wlsrStaPktSizeStatsEntry OBJECT-TYPE SYNTAX WlsrStaPktSizeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Station Packet Size Stats." INDEX { wlsrStaAddress} ::= { wlsrStaPktSizeStatsTable 1 } WlsrStaPktSizeStatsEntry ::= SEQUENCE { wlsrStaTxPkts63Bytes Counter32 , wlsrStaTxPkts64To127 Counter32 , wlsrStaTxPkts128To255 Counter32 , wlsrStaTxPkts256To511 Counter32 , wlsrStaTxPkts512To1023 Counter32 , wlsrStaTxPkts1024To1518 Counter32 , wlsrStaRxPkts63Bytes Counter32 , wlsrStaRxPkts64To127 Counter32 , wlsrStaRxPkts128To255 Counter32 , wlsrStaRxPkts256To511 Counter32 , wlsrStaRxPkts512To1023 Counter32 , wlsrStaRxPkts1024To1518 Counter32 } wlsrStaTxPkts63Bytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets transmitted by the station that were less than 64 bytes long. " ::= { wlsrStaPktSizeStatsEntry 1 } wlsrStaTxPkts64To127 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets transmitted by the station that were between 64 and 127 bytes long. " ::= { wlsrStaPktSizeStatsEntry 2 } wlsrStaTxPkts128To255 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets transmitted by the station that were between 128 and 255 bytes long. " ::= { wlsrStaPktSizeStatsEntry 3 } wlsrStaTxPkts256To511 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets transmitted by the station that were between 256 and 511 bytes long. " ::= { wlsrStaPktSizeStatsEntry 4 } wlsrStaTxPkts512To1023 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets transmitted by the station that were between 512 and 1023 bytes long. " ::= { wlsrStaPktSizeStatsEntry 5 } wlsrStaTxPkts1024To1518 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets transmitted by the station that were between 1024 and 1518 bytes long. " ::= { wlsrStaPktSizeStatsEntry 6 } wlsrStaRxPkts63Bytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets Received by the station that were less than 64 bytes long. " ::= { wlsrStaPktSizeStatsEntry 7 } wlsrStaRxPkts64To127 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets Received by the station that were between 64 and 127 bytes long. " ::= { wlsrStaPktSizeStatsEntry 8 } wlsrStaRxPkts128To255 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets Received by the station that were between 128 and 255 bytes long. " ::= { wlsrStaPktSizeStatsEntry 9 } wlsrStaRxPkts256To511 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets Received by the station that were between 256 and 511 bytes long. " ::= { wlsrStaPktSizeStatsEntry 10 } wlsrStaRxPkts512To1023 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets Received by the station that were between 512 and 1023 bytes long. " ::= { wlsrStaPktSizeStatsEntry 11 } wlsrStaRxPkts1024To1518 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets Received by the station that were between 1024 and 1518 bytes long. " ::= { wlsrStaPktSizeStatsEntry 12 } -- Air Monitor Access Point List Table. On an Air monitor this table lists all -- the Access Points the AM is monitoring. On an Access Point, this table -- contains itself. wlsrAirMonitorApListTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsrAirMonitorApListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the Access Points monitored by the AM. " ::= { wlsrAirMonitorGroup 1 } wlsrAirMonitorApListEntry OBJECT-TYPE SYNTAX WlsrAirMonitorApListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ap List Entry" INDEX { wlsrAmApBSSID} ::= { wlsrAirMonitorApListTable 1 } WlsrAirMonitorApListEntry ::= SEQUENCE { wlsrAmApBSSID MacAddress , wlsrAmSSID DisplayString , wlsrAmChannel INTEGER , wlsrAmPhysicalType INTEGER , wlsrAmAccessPointType INTEGER , wlsrAmRAPType INTEGER, wlsrAmRSSI Integer32, wlsrAmMonitoredTime TimeTicks, wlsrAmInactivityTime TimeTicks, wlsrAmLoadBalancing INTEGER } wlsrAmApBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " BSSID of the Access Point. " ::= { wlsrAirMonitorApListEntry 1 } wlsrAmSSID OBJECT-TYPE SYNTAX DisplayString(SIZE(0..62)) MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the SSID of the AP. " ::= { wlsrAirMonitorApListEntry 2 } wlsrAmChannel OBJECT-TYPE SYNTAX INTEGER(1..165) MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the channel on which this AP is operating. " ::= { wlsrAirMonitorApListEntry 3 } wlsrAmPhysicalType OBJECT-TYPE SYNTAX INTEGER{ dot11b(1), dot11a(2), dot11g(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the physical layer type. " ::= { wlsrAirMonitorApListEntry 4 } wlsrAmAccessPointType OBJECT-TYPE SYNTAX INTEGER{ genericAp(1), softAp(2), ciscoAp(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the type of AP. " ::= { wlsrAirMonitorApListEntry 5 } wlsrAmRAPType OBJECT-TYPE SYNTAX INTEGER{ valid(1), interfering(2), unsecure(3), dos(4), unknown(5) } MAX-ACCESS read-only STATUS current DESCRIPTION " Type of the Access Point. " ::= { wlsrAirMonitorApListEntry 6 } wlsrAmRSSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Access point Receiver Signal Strength Indicator. " ::= { wlsrAirMonitorApListEntry 7 } wlsrAmMonitoredTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " Time in ticks, since the AM is observing this access point. " ::= { wlsrAirMonitorApListEntry 8 } wlsrAmInactivityTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " Access point Inactivity Time. " ::= { wlsrAirMonitorApListEntry 9 } wlsrAmLoadBalancing OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " The attributes indicates whether Load balancing is enabled for this access point. " ::= { wlsrAirMonitorApListEntry 10 } -- wlsrTrapsGroup -- This group defines all the traps generated by the access points. -- Objects defined under this group does not have support for -- GET or SET. They are defined in the MIB to pass specific -- information. which has meaning only in the context of a trap. wlsrTrapObjectsGroup OBJECT IDENTIFIER ::= { wlsrTrapsGroup 100 } wlsrTargetApBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " This Object is used in the traps to indicate the BSSID of the Access Point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an Access Point is sending the trap, then it will point to itself. " ::= { wlsrTrapObjectsGroup 1 } wlsrTargetApSSID OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION " This Object is used in the traps to indicate the SSID of the Access Point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an Access Point is sending the trap, then it will point to itself. " ::= { wlsrTrapObjectsGroup 2 } wlsrTargetApChannel OBJECT-TYPE SYNTAX INTEGER(1..165) MAX-ACCESS read-only STATUS current DESCRIPTION " This Object is used in the traps to indicate the Channel of the Access Point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an Access Point is sending the trap, then it will point to itself. " ::= { wlsrTrapObjectsGroup 3 } wlsrSourceMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " This Object is used in the traps to indicate the MAC address of the Source. " ::= { wlsrTrapObjectsGroup 4 } wlsrNodeMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " This Object is used in the traps to indicate the MAC address of a Node. " ::= { wlsrTrapObjectsGroup 5 } wlsrFrameType OBJECT-TYPE SYNTAX INTEGER{ associateRequest(1), associateResponse(2), reassociateRequest(3), reassociateResponse(4), probeRequest(5), probeResponse(6), beacon(9), atim(10), disassociate(11), auth(12), deauth(13) } MAX-ACCESS read-only STATUS current DESCRIPTION " This Object is used in the traps to indicate the Frame Type. " ::= { wlsrTrapObjectsGroup 6 } wlsrAddressType OBJECT-TYPE SYNTAX INTEGER{ srcAddress(1), dstAddress(2), bssid(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " This Object is used in the traps to indicate the Address Type. " ::= { wlsrTrapObjectsGroup 7 } wlsrSignatureName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION " This Object is used in the traps to indicate the Signature Name. " ::= { wlsrTrapObjectsGroup 8 } wlsrMatchedMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " This Object is used in the traps to indicate the Macaddress. " ::= { wlsrTrapObjectsGroup 9 } wlsrMatchedIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " This Object is used in the traps to indicate the Ip Address. " ::= { wlsrTrapObjectsGroup 10 } wlsrReceiverMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " This Object is used in the traps to indicate the MAC address of the Receiver. " ::= { wlsrTrapObjectsGroup 11 } wlsrTransmitterMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " This Object is used in the traps to indicate the MAC address of the Transmitter. " ::= { wlsrTrapObjectsGroup 12 } wlsrRSSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This Object is used in the traps to indicate the Signal Strength Indicator. " ::= { wlsrTrapObjectsGroup 13 } wlsrRogueInfoURL OBJECT-TYPE SYNTAX DisplayString(SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION " This Object is used to point to the WEBGUI Rogue AP information URL. " ::= { wlsrTrapObjectsGroup 14 } wlsrInterferingAPInfoURL OBJECT-TYPE SYNTAX DisplayString(SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION " This Object is used to point to the WEBGUI Rogue interfering AP information URL. " ::= { wlsrTrapObjectsGroup 15 } wlsrUnsecureApDetected NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel, wlsrMatchedMac, wlsrMatchedIp, wlsrRogueInfoURL} STATUS current DESCRIPTION " This trap indicates that an Unsecure Access Point is detected by an Air Monitor located at wlsrLocation on channel wlsrCurrentChannel. The AP is declared unsecure, because we matched it to the wlsrMatchedMac/wlsrMatchedIp. " ::= { wlsrTrapsGroup 1001 } wlsrStaImpersonation NOTIFICATION-TYPE OBJECTS {wlsrNodeMac, wlsrLocation} STATUS current DESCRIPTION " This trap indicates that an AM at location wlsrLocation detected a Station impersonation. " ::= { wlsrTrapsGroup 1002 } wlsrReservedChannelViolation NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an Access Point is detected by an AP at location wlsrLocation, which violates the Reserved Channel configuration. " ::= { wlsrTrapsGroup 1003 } wlsrValidSSIDViolation NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an Access Point violating Valid SSID is detected by an AP at wlsrLocation. " ::= { wlsrTrapsGroup 1004 } wlsrChannelMisconfiguration NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an Access Point has a bad channel configuration. " ::= { wlsrTrapsGroup 1005 } wlsrOUIMisconfiguration NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an Access Point has bad OUI configuration. " ::= { wlsrTrapsGroup 1006 } wlsrSSIDMisconfiguration NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an Access Point has bad SSID configuration. " ::= { wlsrTrapsGroup 1007 } wlsrShortPreableMisconfiguration NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an Access Point has bad Short preamble configuration. " ::= { wlsrTrapsGroup 1008 } wlsrWPAMisconfiguration NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an Access Point has bad WPA configuration. " ::= { wlsrTrapsGroup 1009 } wlsrAdhocNetworkDetected NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an AM has detected an Adhoc network. " ::= { wlsrTrapsGroup 1010 } wlsrStaPolicyViolation NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrNodeMac, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that a Valid Station policy is violated. " ::= { wlsrTrapsGroup 1011 } wlsrRepeatWEPIVViolation NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an AP/AM detected a Repeat WEP-IV violation. " ::= { wlsrTrapsGroup 1012 } wlsrWeakWEPIVViolation NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an AP/AM detected a Weak WEP-IV violation. " ::= { wlsrTrapsGroup 1013 } wlsrChannelInterferenceDetected NOTIFICATION-TYPE OBJECTS {wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an AM/AP located at wlsrLocation has detected a channel interference on wlsrCurrentChannel. " ::= { wlsrTrapsGroup 1014 } wlsrAPInterferenceDetected NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an AM/AP located at wlsrLocation has detected an AP interference on wlsrCurrentChannel. " ::= { wlsrTrapsGroup 1015 } wlsrStaInterferenceDetected NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrNodeMac, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an AM/AP located at wlsrLocation has detected a Station interference on wlsrCurrentChannel. " ::= { wlsrTrapsGroup 1016 } wlsrFrameRetryRateExceeded NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded an upper threshold for Frame Retry Rate for AP wlsrTargetApBSSID. " ::= { wlsrTrapsGroup 1017 } wlsrFrameReceiveErrorRateExceeded NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrTargetApChannel, wlsrLocation} STATUS current DESCRIPTION " This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded an upper threshold for Frame Receive Error Rate for AP wlsrTargetApBSSID. " ::= { wlsrTrapsGroup 1018 } wlsrFrameFragmentationRateExceeded NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrTargetApChannel, wlsrLocation} STATUS current DESCRIPTION " This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded an upper threshold for Frame Fragmentation Rate for AP wlsrTargetApBSSID. " ::= { wlsrTrapsGroup 1019 } wlsrFrameBandWidthRateExceeded NOTIFICATION-TYPE OBJECTS {wlsrNodeMac, wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an AM/AP located at wlsrLocation is reporting that a station wlsrStaAddress has exceeded the allocated Bandwidth rate. " ::= { wlsrTrapsGroup 1020 } wlsrFrameLowSpeedRateExceeded NOTIFICATION-TYPE OBJECTS {wlsrNodeMac, wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an AM/AP located at wlsrLocation is reporting that a station wlsrStaAddress has exceeded the Low speed rate. " ::= { wlsrTrapsGroup 1021 } wlsrFrameNonUnicastRateExceeded NOTIFICATION-TYPE OBJECTS {wlsrNodeMac, wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an AM/AP located at wlsrLocation is reporting that a station wlsrStaAddress has exceeded the Non Unicast traffic rate. " ::= { wlsrTrapsGroup 1022 } wlsrLoadbalancingEnabled NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP with BSSID wlsrTargetApBSSID has enabled Load balancing. " ::= { wlsrTrapsGroup 1023 } wlsrChannelFrameRetryRateExceeded NOTIFICATION-TYPE OBJECTS {wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an AM/AP located at wlsrLocation is reporting that it exceeded an upper threshold for Frame Retry Rate. " ::= { wlsrTrapsGroup 1024 } wlsrChannelFrameFragmentationRateExceeded NOTIFICATION-TYPE OBJECTS {wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an AM/AP located at wlsrLocation is reporting that it exceeded an upper threshold for Frame Fragmentation Rate. " ::= { wlsrTrapsGroup 1025 } wlsrChannelFrameErrorRateExceeded NOTIFICATION-TYPE OBJECTS {wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an AM/AP located at wlsrLocation is reporting that it exceeded an upper threshold for Frame Error Rate. " ::= { wlsrTrapsGroup 1026 } wlsrSignatureMatch NOTIFICATION-TYPE OBJECTS {wlsrSignatureName, wlsrSourceMac,wlsrRSSI, wlsrLocation} STATUS current DESCRIPTION " This trap indicates that we detected a signature match. " ::= { wlsrTrapsGroup 1027 } wlsrChannelRateAnomaly NOTIFICATION-TYPE OBJECTS {wlsrFrameType, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an AP/AM at wlsrLocation detected frames of type wlsrFrameType on wlsrCurrentChannel which exceeds the configured IDS rate threshold. " ::= { wlsrTrapsGroup 1028 } wlsrNodeRateAnomaly NOTIFICATION-TYPE OBJECTS {wlsrFrameType, wlsrNodeMac, wlsrRSSI, wlsrLocation} STATUS current DESCRIPTION " This trap indicates that an AP/AM at wlsrLocation detected frames of type wlsrFrameType transmitted by node wlsrNodeMac which exceeds the configured IDS rate threshold. " ::= { wlsrTrapsGroup 1029 } wlsrEAPRateAnomaly NOTIFICATION-TYPE OBJECTS {wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that the number of EAP Handshake packets received by an AP/AM at wlsrLocation exceeds the configured IDS EAP Handshake rate. " ::= { wlsrTrapsGroup 1030 } wlsrSignalAnomaly NOTIFICATION-TYPE OBJECTS {wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an AP/AM at wlsrLocation detected a Signal Anomaly on wlsrCurrentChannel. " ::= { wlsrTrapsGroup 1031 } wlsrSequenceNumberAnomaly NOTIFICATION-TYPE OBJECTS {wlsrSourceMac, wlsrRSSI, wlsrLocation} STATUS current DESCRIPTION " This trap indicates that an AP/AM at wlsrLocation received packets which exceeds the acceptable sequence number difference. The acceptable sequence number difference is an IDS Configuration object. " ::= { wlsrTrapsGroup 1032 } wlsrDisconnectStationAttack NOTIFICATION-TYPE OBJECTS {wlsrFrameType, wlsrSourceMac, wlsrRSSI, wlsrLocation} STATUS current DESCRIPTION " This trap indicates that an AP/AM detected a station Disconnect attack. " ::= { wlsrTrapsGroup 1033 } wlsrApFloodAttack NOTIFICATION-TYPE OBJECTS {wlsrLocation} STATUS current DESCRIPTION " This trap is triggered when the number of spurious AP's detected by an AP/AM at wlsrLocation exceeds the configured IDS threshold. " ::= { wlsrTrapsGroup 1034 } wlsrAdhocNetwork NOTIFICATION-TYPE OBJECTS {wlsrSourceMac, wlsrTargetApBSSID, wlsrTargetApSSID, wlsrRSSI, wlsrLocation} STATUS current DESCRIPTION " This trap indicates that an AP/AM at wlsrLocation detected an Adhoc Network. Node wlsrSourceMac is connected to an adhoc AP wlsrTargetApBSSID with wlsrTargetApSSID ssid. " ::= { wlsrTrapsGroup 1035 } wlsrWirelessBridge NOTIFICATION-TYPE OBJECTS {wlsrTransmitterMac, wlsrReceiverMac, wlsrRSSI, wlsrLocation} STATUS current DESCRIPTION " This trap indicates that an AP/AM at wlsrLocation detected a Wireless Bridge. The detected bridge is between wlsrSourceMac and wlsrReceiverMac. " ::= { wlsrTrapsGroup 1036 } wlsrInvalidMacOUI NOTIFICATION-TYPE OBJECTS {wlsrAddressType, wlsrNodeMac,wlsrRSSI, wlsrLocation} STATUS current DESCRIPTION " This trap indicates that an AP/AM at wlsrLocation detected an Invalid MAC OUI in transmission from the Node wlsrNodeMac. The invalid mac is the . " ::= { wlsrTrapsGroup 1037 } wlsrLoadbalancingDisabled NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrTargetApChannel, wlsrLocation} STATUS current DESCRIPTION " This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP with BSSID wlsrTargetApBSSID has disabled Load balancing. " ::= { wlsrTrapsGroup 1038 } wlsrWEPMisconfiguration NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an Access Point has bad WEP configuration. " ::= { wlsrTrapsGroup 1039 } wlsrStaRepeatWEPIVViolation NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrNodeMac, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an AP/AM detected a Repeat WEP-IV violation. for a Station " ::= { wlsrTrapsGroup 1040 } wlsrStaWeakWEPIVViolation NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrNodeMac, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an AP/AM detected a Weak WEP-IV violation. for a Station " ::= { wlsrTrapsGroup 1041 } wlsrStaAssociatedToUnsecureAp NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel, wlsrNodeMac, wlsrRogueInfoURL} STATUS current DESCRIPTION " This trap indicates that a station with wlsrNodeMac associated with an Unsecure Access Point wlsrTargetApBSSID. This is detected by an Air Monitor located at wlsrLocation on channel wlsrCurrentChannel. " ::= { wlsrTrapsGroup 1042 } wlsrAdhocNetworkBridgeDetected NOTIFICATION-TYPE OBJECTS {wlsrSourceMac, wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} STATUS current DESCRIPTION " This trap indicates that an AM has detected an Adhoc network that is bridging to a wired network " ::= { wlsrTrapsGroup 1043 } wlsrInterferingApDetected NOTIFICATION-TYPE OBJECTS {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel, wlsrInterferingAPInfoURL} STATUS current DESCRIPTION " This trap indicates that an Interfering Access Point is detected by an Air Monitor located at wlsrLocation on channel wlsrCurrentChannel. " ::= { wlsrTrapsGroup 1044 } END