--- ArubaOS 8.8.0.1_80393 -- vim:set ts=4 sw=4: WLSX-MON-MIB DEFINITIONS ::= BEGIN IMPORTS TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-IDENTITY, OBJECT-TYPE, snmpModules, Integer32, Counter32, IpAddress, NOTIFICATION-TYPE FROM SNMPv2-SMI TDomain, DisplayString, PhysAddress, TAddress, TimeInterval, RowStatus, StorageType, TestAndIncr, MacAddress, TruthValue FROM SNMPv2-TC ArubaEnableValue, ArubaFrameType, ArubaRogueApType, ArubaStationType, ArubaPhyType, ArubaAPMatchType, ArubaAPMatchMethod, ArubaHTMode, ArubaHTRate, ArubaMonEncryptionType, ArubaMonEncryptionCipher, ArubaMonAuthAlgorithm FROM ARUBA-TC OBJECT-GROUP FROM SNMPv2-CONF wlsxEnterpriseMibModules FROM ARUBA-MIB; wlsxMonMIB MODULE-IDENTITY LAST-UPDATED "202008141745Z" ORGANIZATION "Aruba, a Hewlett Packard Enterprise company" CONTACT-INFO "Postal: 3333 Scott Blvd, Santa Clara, CA 95054 E-mail: aruba-ext-eng-reg@hpe.com Phone: 408 227 4500 Fax: 408 752 0626" DESCRIPTION " This MIB module defines MIB objects which provide information about the Monitored Access Points. " REVISION "202008141745Z" DESCRIPTION "The initial revision." ::= { wlsxEnterpriseMibModules 6 } wlsxMonStatsGroup OBJECT IDENTIFIER ::= { wlsxMonMIB 6 } wlsxMonInfoGroup OBJECT IDENTIFIER ::= { wlsxMonMIB 7 } wlsxMonAccessPointStatsGroup OBJECT IDENTIFIER ::= { wlsxMonStatsGroup 1 } wlsxMonStationStatsGroup OBJECT IDENTIFIER ::= { wlsxMonStatsGroup 2 } -- Stats group contains tables for station statistics, channel statistics and -- AP statistics. wlsxMonAPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxMonAPStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This Table lists the statistics of all the APs being monitored by the controller. " ::= { wlsxMonAccessPointStatsGroup 1 } wlsxMonAPStatsEntry OBJECT-TYPE SYNTAX WlsxMonAPStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Monitored Access Point Stats entry" INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID} ::= { wlsxMonAPStatsTable 1 } WlsxMonAPStatsEntry ::= SEQUENCE { monPhyAddress MacAddress, monRadioNumber Integer32, monitoredApBSSID MacAddress, monPhyType ArubaPhyType, monAPCurrentChannel Unsigned32, monAPNumClients Integer32, monAPTxPkts Counter32, monAPTxBytes Counter32, monAPRxPkts Counter32, monAPRxBytes Counter32, monAPTxDeauthentications Counter32, monAPRxDeauthentications Counter32, monAPChannelThroughput Integer32, monAPFrameRetryRate Integer32, monAPFrameLowSpeedRate Integer32, monAPFrameNonUnicastRate Integer32, monAPFrameFragmentationRate Integer32, monAPFrameBandwidthRate Integer32, monAPFrameRetryErrorRate Integer32, monAPChannelErrorRate Integer32, monAPESSID DisplayString, monAPRSSI Integer32, monAPFrameReceiveErrorRate Integer32 } monPhyAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " MAC address of the air monitor that is monitoring the AP. " ::= { wlsxMonAPStatsEntry 1} monRadioNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " Radio number of the air monitor that is monitoring the AP. " ::= { wlsxMonAPStatsEntry 2 } monitoredApBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " BSSID of the access point being monitored. " ::= { wlsxMonAPStatsEntry 3} monPhyType OBJECT-TYPE SYNTAX ArubaPhyType MAX-ACCESS read-only STATUS current DESCRIPTION " PHY type of the access point being monitored. " ::= { wlsxMonAPStatsEntry 4 } monAPCurrentChannel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Channel the monitored AP is using. " ::= { wlsxMonAPStatsEntry 5 } monAPNumClients OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of clients associated to this monitored AP. " ::= { wlsxMonAPStatsEntry 6 } monAPTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of packets transmitted by this monitored AP. " ::= { wlsxMonAPStatsEntry 7 } monAPTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of bytes transmitted by this monitored AP. " ::= { wlsxMonAPStatsEntry 8 } monAPRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of packets received by this monitored AP. " ::= { wlsxMonAPStatsEntry 9 } monAPRxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of bytes received by this monitored AP. " ::= { wlsxMonAPStatsEntry 10 } monAPTxDeauthentications OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of deauthentications transmitted by this monitored AP. " ::= { wlsxMonAPStatsEntry 11 } monAPRxDeauthentications OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of deauthentications received by this monitored AP. " ::= { wlsxMonAPStatsEntry 12 } monAPChannelThroughput OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The throughput achieved on this channel by this monitored AP. " ::= { wlsxMonAPStatsEntry 13 } monAPFrameRetryRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of retry packets as a percentage of the total packets transmitted and received by this monitored AP " ::= { wlsxMonAPStatsEntry 14 } monAPFrameLowSpeedRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps for B band) packets as a percentage of the total packets transmitted and received by this monitored AP " ::= { wlsxMonAPStatsEntry 15 } monAPFrameNonUnicastRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The multicast rate on this monitored AP. " ::= { wlsxMonAPStatsEntry 16 } monAPFrameFragmentationRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of fragments as a percentage of the total packets transmitted by this monitored AP. " ::= { wlsxMonAPStatsEntry 17 } monAPFrameBandwidthRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The bandwidth of this monitored AP in Kbps. " ::= { wlsxMonAPStatsEntry 18 } monAPFrameRetryErrorRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION " The number of error packets as a percentage of the total packets received on this monitored AP. " ::= { wlsxMonAPStatsEntry 19 } monAPChannelErrorRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of error packets as a percentage of the total packets received on the current channel. " ::= { wlsxMonAPStatsEntry 20 } monAPESSID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " ESSID of the access point being monitored. " ::= { wlsxMonAPStatsEntry 21 } monAPRSSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " SNR of the access point being monitored. " ::= { wlsxMonAPStatsEntry 22 } monAPFrameReceiveErrorRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of error packets as a percentage of the total packets received on this monitored AP. " ::= { wlsxMonAPStatsEntry 23 } -- This table breaks down the AP statistics observed into different -- rate categories. wlsxMonAPRateStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxMonAPRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the monitored AP Packet and Byte Counts but represented in terms of rate categories. " ::= { wlsxMonAccessPointStatsGroup 2 } wlsxMonAPRateStatsEntry OBJECT-TYPE SYNTAX WlsxMonAPRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data rate based packet and byte count entry for a monitored AP" INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID} ::= { wlsxMonAPRateStatsTable 1 } WlsxMonAPRateStatsEntry ::= SEQUENCE { monAPStatsTotPktsAt1Mbps Counter32, monAPStatsTotBytesAt1Mbps Counter32, monAPStatsTotPktsAt2Mbps Counter32, monAPStatsTotBytesAt2Mbps Counter32, monAPStatsTotPktsAt5Mbps Counter32, monAPStatsTotBytesAt5Mbps Counter32, monAPStatsTotPktsAt11Mbps Counter32, monAPStatsTotBytesAt11Mbps Counter32, monAPStatsTotPktsAt6Mbps Counter32, monAPStatsTotBytesAt6Mbps Counter32, monAPStatsTotPktsAt12Mbps Counter32, monAPStatsTotBytesAt12Mbps Counter32, monAPStatsTotPktsAt18Mbps Counter32, monAPStatsTotBytesAt18Mbps Counter32, monAPStatsTotPktsAt24Mbps Counter32, monAPStatsTotBytesAt24Mbps Counter32, monAPStatsTotPktsAt36Mbps Counter32, monAPStatsTotBytesAt36Mbps Counter32, monAPStatsTotPktsAt48Mbps Counter32, monAPStatsTotBytesAt48Mbps Counter32, monAPStatsTotPktsAt54Mbps Counter32, monAPStatsTotBytesAt54Mbps Counter32, monAPStatsTotPktsAt9Mbps Counter32, monAPStatsTotBytesAt9Mbps Counter32 } monAPStatsTotPktsAt1Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed from this BSSID at 1Mbps rate. " ::= { wlsxMonAPRateStatsEntry 1 } monAPStatsTotBytesAt1Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed from this BSSID at 1Mbps rate. " ::= { wlsxMonAPRateStatsEntry 2 } monAPStatsTotPktsAt2Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed from this BSSID at 2Mbps rate. " ::= { wlsxMonAPRateStatsEntry 3 } monAPStatsTotBytesAt2Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed from this BSSID at 2Mbps rate. " ::= { wlsxMonAPRateStatsEntry 4 } monAPStatsTotPktsAt5Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed from this BSSID at 5Mbps rate. " ::= { wlsxMonAPRateStatsEntry 5 } monAPStatsTotBytesAt5Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed from this BSSID at 5Mbps rate. " ::= { wlsxMonAPRateStatsEntry 6 } monAPStatsTotPktsAt11Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed from this BSSID at 11Mbps rate. " ::= { wlsxMonAPRateStatsEntry 7 } monAPStatsTotBytesAt11Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed from this BSSID at 11Mbps rate. " ::= { wlsxMonAPRateStatsEntry 8 } monAPStatsTotPktsAt6Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed from this BSSID at 6Mbps rate. " ::= { wlsxMonAPRateStatsEntry 9 } monAPStatsTotBytesAt6Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed from this BSSID at 6Mbps rate. " ::= { wlsxMonAPRateStatsEntry 10 } monAPStatsTotPktsAt12Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed from this BSSID at 12Mbps rate. " ::= { wlsxMonAPRateStatsEntry 11 } monAPStatsTotBytesAt12Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed from this BSSID at 12Mbps rate. " ::= { wlsxMonAPRateStatsEntry 12 } monAPStatsTotPktsAt18Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed from this BSSID at 18Mbps rate. " ::= { wlsxMonAPRateStatsEntry 13 } monAPStatsTotBytesAt18Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed from this BSSID at 18Mbps rate. " ::= { wlsxMonAPRateStatsEntry 14 } monAPStatsTotPktsAt24Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed from this BSSID at 24Mbps rate. " ::= { wlsxMonAPRateStatsEntry 15 } monAPStatsTotBytesAt24Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed from this BSSID at 24Mbps rate. " ::= { wlsxMonAPRateStatsEntry 16 } monAPStatsTotPktsAt36Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed from this BSSID at 36Mbps rate. " ::= { wlsxMonAPRateStatsEntry 17 } monAPStatsTotBytesAt36Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed from this BSSID at 36Mbps rate. " ::= { wlsxMonAPRateStatsEntry 18 } monAPStatsTotPktsAt48Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed from this BSSID at 48Mbps rate. " ::= { wlsxMonAPRateStatsEntry 19 } monAPStatsTotBytesAt48Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed from this BSSID at 48Mbps rate. " ::= { wlsxMonAPRateStatsEntry 20 } monAPStatsTotPktsAt54Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed from this BSSID at 54Mbps rate. " ::= { wlsxMonAPRateStatsEntry 21 } monAPStatsTotBytesAt54Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed from this BSSID at 54Mbps rate. " ::= { wlsxMonAPRateStatsEntry 22 } monAPStatsTotPktsAt9Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets observed from this BSSID at 9Mbps rate. " ::= { wlsxMonAPRateStatsEntry 23 } monAPStatsTotBytesAt9Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Bytes observed from this BSSID at 9Mbps rate. " ::= { wlsxMonAPRateStatsEntry 24 } -- This table breaks down the channel statistics observed based on the -- Destination Address Types. wlsxMonAPDATypeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxMonAPDATypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the per BSSID Packet and Byte Counts but broken down in terms of Destination Address Type. " ::= { wlsxMonAccessPointStatsGroup 3 } wlsxMonAPDATypeStatsEntry OBJECT-TYPE SYNTAX WlsxMonAPDATypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Destination Address based packet and byte count entry for a monitored AP " INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID} ::= { wlsxMonAPDATypeStatsTable 1 } WlsxMonAPDATypeStatsEntry ::= SEQUENCE { monAPStatsTotDABroadcastPkts Counter32 , monAPStatsTotDABroadcastBytes Counter32 , monAPStatsTotDAMulticastPkts Counter32 , monAPStatsTotDAMulticastBytes Counter32 , monAPStatsTotDAUnicastPkts Counter32 , monAPStatsTotDAUnicastBytes Counter32 } monAPStatsTotDABroadcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Broadcast packets observed from this BSSID. " ::= { wlsxMonAPDATypeStatsEntry 1 } monAPStatsTotDABroadcastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Broadcast Bytes observed from this BSSID. " ::= { wlsxMonAPDATypeStatsEntry 2 } monAPStatsTotDAMulticastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Multicast packets observed from this BSSID. " ::= { wlsxMonAPDATypeStatsEntry 3 } monAPStatsTotDAMulticastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Multicast Bytes observed from this BSSID. " ::= { wlsxMonAPDATypeStatsEntry 4 } monAPStatsTotDAUnicastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Unicast packets observed from this BSSID. " ::= { wlsxMonAPDATypeStatsEntry 5 } monAPStatsTotDAUnicastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Unicast Bytes observed from this BSSID. " ::= { wlsxMonAPDATypeStatsEntry 6 } -- This table breaks down the channel statistics observed based on the -- the Type of the Packet. wlsxMonAPFrameTypeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxMonAPFrameTypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the per BSSID Packet and Byte Counts but broken down into different Frame Types. " ::= { wlsxMonAccessPointStatsGroup 4 } wlsxMonAPFrameTypeStatsEntry OBJECT-TYPE SYNTAX WlsxMonAPFrameTypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Frame Type based packet and byte count entry for a monitored AP" INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID} ::= { wlsxMonAPFrameTypeStatsTable 1 } WlsxMonAPFrameTypeStatsEntry ::= SEQUENCE { monAPStatsTotMgmtPkts Counter32 , monAPStatsTotMgmtBytes Counter32 , monAPStatsTotCtrlPkts Counter32 , monAPStatsTotCtrlBytes Counter32 , monAPStatsTotDataPkts Counter32 , monAPStatsTotDataBytes Counter32 } monAPStatsTotMgmtPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Management packets observed from this BSSID. " ::= { wlsxMonAPFrameTypeStatsEntry 1 } monAPStatsTotMgmtBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Management Bytes observed from this BSSID. " ::= { wlsxMonAPFrameTypeStatsEntry 2 } monAPStatsTotCtrlPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Control packets observed from this BSSID. " ::= { wlsxMonAPFrameTypeStatsEntry 3 } monAPStatsTotCtrlBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Control Bytes observed from this BSSID. " ::= { wlsxMonAPFrameTypeStatsEntry 4 } monAPStatsTotDataPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Data packets observed from this BSSID. " ::= { wlsxMonAPFrameTypeStatsEntry 5 } monAPStatsTotDataBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of Data Bytes observed from this BSSID. " ::= { wlsxMonAPFrameTypeStatsEntry 6 } -- This table breaks down the channel statistics observed into packet size -- buckets. wlsxMonAPPktSizeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxMonAPPktSizeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the per BSSID Packet and Byte Counts but broken down into different Packet Sizes. " ::= { wlsxMonAccessPointStatsGroup 5 } wlsxMonAPPktSizeStatsEntry OBJECT-TYPE SYNTAX WlsxMonAPPktSizeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Packet Size based packet count entry for a BSSID" INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID} ::= { wlsxMonAPPktSizeStatsTable 1 } WlsxMonAPPktSizeStatsEntry ::= SEQUENCE { monAPStatsPkts63Bytes Counter32 , monAPStatsPkts64To127 Counter32 , monAPStatsPkts128To255 Counter32 , monAPStatsPkts256To511 Counter32 , monAPStatsPkts512To1023 Counter32 , monAPStatsPkts1024To1518 Counter32 } monAPStatsPkts63Bytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets transmitted by the AP that were less than 64 bytes long. " ::= { wlsxMonAPPktSizeStatsEntry 1 } monAPStatsPkts64To127 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets transmitted by the AP that were between 64 and 127 bytes long. " ::= { wlsxMonAPPktSizeStatsEntry 2 } monAPStatsPkts128To255 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets transmitted by the AP that were between 128 and 255 bytes long. " ::= { wlsxMonAPPktSizeStatsEntry 3 } monAPStatsPkts256To511 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets transmitted by the AP that were between 256 and 511 bytes long. " ::= { wlsxMonAPPktSizeStatsEntry 4 } monAPStatsPkts512To1023 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets transmitted by the AP that were between 512 and 1023 bytes long. " ::= { wlsxMonAPPktSizeStatsEntry 5 } monAPStatsPkts1024To1518 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total number of packets transmitted by the AP that were between 1024 and 1518 bytes long. " ::= { wlsxMonAPPktSizeStatsEntry 6 } -- This table breaks down the AP statistics observed into different -- HT rate categories. wlsxMonAPHTRateStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxMonAPHTRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the monitored AP Packet and Byte Counts but represented in terms of HT rate categories. " ::= { wlsxMonAccessPointStatsGroup 6 } wlsxMonAPHTRateStatsEntry OBJECT-TYPE SYNTAX WlsxMonAPHTRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data rate based packet and byte count entry for a monitored AP" INDEX { monPhyAddress, monRadioNumber, monitoredApBSSID, monHTRate } ::= { wlsxMonAPHTRateStatsTable 1 } WlsxMonAPHTRateStatsEntry ::= SEQUENCE { monHTRate ArubaHTRate, monAPStatsTotHTPkts Counter32, monAPStatsTotHTBytes Counter32 } monHTRate OBJECT-TYPE SYNTAX ArubaHTRate MAX-ACCESS read-only STATUS current DESCRIPTION " The rate at which the counters apply " ::= { wlsxMonAPHTRateStatsEntry 1 } monAPStatsTotHTPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The total number of packets processed at the indicated rate " ::= { wlsxMonAPHTRateStatsEntry 2 } monAPStatsTotHTBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The total number of bytes processed at the indicated rate " ::= { wlsxMonAPHTRateStatsEntry 3 } -- wlsxMonStationStatsGroup contains all the statistics observed by different -- Air Monitors attached to this controller. -- Station Statatistics are observed by the Air Monitor for that -- specific Station. -- Station Statistics are grouped into Generic, -- Rate, Destination Address and Frame Type Stats. -- Station Statistics Group contains all the statistics related to -- a Station. -- wlsxMonStationStatsTable will contain all the Agregate statistics collected -- for a Station wlsxMonStationStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MonStationStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This Table lists the statistics of all the wireless stations being monitored by an AP connected to this controller. " ::= { wlsxMonStationStatsGroup 1} wlsxMonStationStatsEntry OBJECT-TYPE SYNTAX MonStationStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Monitored Station Stats Entry" INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress} ::= { wlsxMonStationStatsTable 1 } MonStationStatsEntry ::= SEQUENCE { monitoredStaPhyAddress MacAddress, monStaChannelNum Unsigned32, monStaTxPkts Counter32, monStaTxBytes Counter32, monStaRxPkts Counter32, monStaRxBytes Counter32, monStaTxBCastPkts Counter32, monStaTxBCastBytes Counter32, monStaTxMCastPkts Counter32, monStaTxMCastBytes Counter32, monStaDataPkts Counter32, monStaCtrlPkts Counter32, monStaNumAssocRequests Counter32, monStaNumAuthRequests Counter32, monStaTxDeauthentications Counter32, monStaRxDeauthentications Counter32, monStaFrameRetryRate Integer32, monStaFrameLowSpeedRate Integer32, monStaFrameNonUnicastRate Integer32, monStaFrameFragmentationRate Integer32, monStaFrameBandwidthRate Integer32, monStaFrameRetryErrorRate Integer32, monStaBSSID MacAddress, monStaESSID DisplayString, monStaPhyType ArubaPhyType, monStaRSSI Integer32, monStaFrameReceiveErrorRate Integer32 } monitoredStaPhyAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " MAC address of the monitored station " ::= { wlsxMonStationStatsEntry 1} monStaChannelNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The channel the station is currently using. " ::= { wlsxMonStationStatsEntry 2 } monStaTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of packets transmitted by this station. " ::= { wlsxMonStationStatsEntry 3 } monStaTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of bytes transmitted by this station. " ::= { wlsxMonStationStatsEntry 4 } monStaRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of packets received by this station. " ::= { wlsxMonStationStatsEntry 5 } monStaRxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of bytes received by this station. " ::= { wlsxMonStationStatsEntry 6 } monStaTxBCastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of broadcast packets transmitted by this station. " ::= { wlsxMonStationStatsEntry 7 } monStaTxBCastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of broadcast bytes transmitted by this station. " ::= { wlsxMonStationStatsEntry 8 } monStaTxMCastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of multicast packets transmitted by this station. " ::= { wlsxMonStationStatsEntry 9 } monStaTxMCastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of multicast bytes transmitted by this station. " ::= { wlsxMonStationStatsEntry 10 } monStaDataPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The total number of Data packets transmitted by this station. " ::= { wlsxMonStationStatsEntry 11 } monStaCtrlPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The total number of Control packets transmitted by this station. " ::= { wlsxMonStationStatsEntry 12 } monStaNumAssocRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Association requests transmitted by this station. " ::= { wlsxMonStationStatsEntry 13 } monStaNumAuthRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Authentication requests transmitted by this station " ::= { wlsxMonStationStatsEntry 14 } monStaTxDeauthentications OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Deauthentication frames transmitted by this station. " ::= { wlsxMonStationStatsEntry 15 } monStaRxDeauthentications OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of Deauthentication frames received by this station. " ::= { wlsxMonStationStatsEntry 16 } monStaFrameRetryRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of retry packets as a percentage of the total packets transmitted and received by this station. " ::= { wlsxMonStationStatsEntry 17 } monStaFrameLowSpeedRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps for B band) packets as a percentage of the total packets transmitted and received by this station. " ::= { wlsxMonStationStatsEntry 18 } monStaFrameNonUnicastRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of broadcast and multicast packets as a percentage of the total packets transmitted by this station. " ::= { wlsxMonStationStatsEntry 19 } monStaFrameFragmentationRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of fragments as a percentage of the total packets transmitted by this station. " ::= { wlsxMonStationStatsEntry 20 } monStaFrameBandwidthRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The bandwidth of this station in Kbps. " ::= { wlsxMonStationStatsEntry 21 } monStaFrameRetryErrorRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION " The number of error packets as a percentage of the total packets received by this station. " ::= { wlsxMonStationStatsEntry 22 } monStaBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " BSSID of the station being monitored. " ::= { wlsxMonStationStatsEntry 23 } monStaESSID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " ESSID of the station being monitored. " ::= { wlsxMonStationStatsEntry 24 } monStaPhyType OBJECT-TYPE SYNTAX ArubaPhyType MAX-ACCESS read-only STATUS current DESCRIPTION " PHY type of the station being monitored. " ::= { wlsxMonStationStatsEntry 25 } monStaRSSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " SNR of the station being monitored. " ::= { wlsxMonStationStatsEntry 26 } monStaFrameReceiveErrorRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of error packets as a percentage of the total packets received by this station. " ::= { wlsxMonStationStatsEntry 27 } -- This table breaks down the Station statistics into different -- rate categories. wlsxMonStaRateStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxMonStaRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the Packet and Byte Counts for a monitored station represented in terms of rate categories. " ::= { wlsxMonStationStatsGroup 2} wlsxMonStaRateStatsEntry OBJECT-TYPE SYNTAX WlsxMonStaRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data rate based packet and byte count entry for a monitored station" INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress} ::= { wlsxMonStaRateStatsTable 1 } WlsxMonStaRateStatsEntry ::= SEQUENCE { monStaTxPktsAt1Mbps Counter32, monStaTxBytesAt1Mbps Counter32, monStaTxPktsAt2Mbps Counter32, monStaTxBytesAt2Mbps Counter32, monStaTxPktsAt5Mbps Counter32, monStaTxBytesAt5Mbps Counter32, monStaTxPktsAt11Mbps Counter32, monStaTxBytesAt11Mbps Counter32, monStaTxPktsAt6Mbps Counter32, monStaTxBytesAt6Mbps Counter32, monStaTxPktsAt12Mbps Counter32, monStaTxBytesAt12Mbps Counter32, monStaTxPktsAt18Mbps Counter32, monStaTxBytesAt18Mbps Counter32, monStaTxPktsAt24Mbps Counter32, monStaTxBytesAt24Mbps Counter32, monStaTxPktsAt36Mbps Counter32, monStaTxBytesAt36Mbps Counter32, monStaTxPktsAt48Mbps Counter32, monStaTxBytesAt48Mbps Counter32, monStaTxPktsAt54Mbps Counter32, monStaTxBytesAt54Mbps Counter32, monStaRxPktsAt1Mbps Counter32, monStaRxBytesAt1Mbps Counter32, monStaRxPktsAt2Mbps Counter32, monStaRxBytesAt2Mbps Counter32, monStaRxPktsAt5Mbps Counter32, monStaRxBytesAt5Mbps Counter32, monStaRxPktsAt11Mbps Counter32, monStaRxBytesAt11Mbps Counter32, monStaRxPktsAt6Mbps Counter32, monStaRxBytesAt6Mbps Counter32, monStaRxPktsAt12Mbps Counter32, monStaRxBytesAt12Mbps Counter32, monStaRxPktsAt18Mbps Counter32, monStaRxBytesAt18Mbps Counter32, monStaRxPktsAt24Mbps Counter32, monStaRxBytesAt24Mbps Counter32, monStaRxPktsAt36Mbps Counter32, monStaRxBytesAt36Mbps Counter32, monStaRxPktsAt48Mbps Counter32, monStaRxBytesAt48Mbps Counter32, monStaRxPktsAt54Mbps Counter32, monStaRxBytesAt54Mbps Counter32, monStaTxPktsAt9Mbps Counter32, monStaTxBytesAt9Mbps Counter32, monStaRxPktsAt9Mbps Counter32, monStaRxBytesAt9Mbps Counter32 } monStaTxPktsAt1Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmitted by the station at 1Mbps rate. " ::= { wlsxMonStaRateStatsEntry 1 } monStaTxBytesAt1Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets transmitted by the station at 1Mbps rate. " ::= { wlsxMonStaRateStatsEntry 2 } monStaTxPktsAt2Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets transmitted by the station at 2Mbps rate. " ::= { wlsxMonStaRateStatsEntry 3 } monStaTxBytesAt2Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets transmitted by the station at 2Mbps rate. " ::= { wlsxMonStaRateStatsEntry 4 } monStaTxPktsAt5Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets transmitted by the station at 5Mbps rate. " ::= { wlsxMonStaRateStatsEntry 5 } monStaTxBytesAt5Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets transmitted by the station at 5Mbps rate. " ::= { wlsxMonStaRateStatsEntry 6 } monStaTxPktsAt11Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets transmitted by the station at 11Mbps rate. " ::= { wlsxMonStaRateStatsEntry 7 } monStaTxBytesAt11Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets transmitted by the station at 11Mbps rate. " ::= { wlsxMonStaRateStatsEntry 8 } monStaTxPktsAt6Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets transmitted by the station at 6Mbps rate. " ::= { wlsxMonStaRateStatsEntry 9 } monStaTxBytesAt6Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets transmitted by the station at 6Mbps rate. " ::= { wlsxMonStaRateStatsEntry 10 } monStaTxPktsAt12Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets transmitted by the station at 12Mbps rate. " ::= { wlsxMonStaRateStatsEntry 11 } monStaTxBytesAt12Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets transmitted by the station at 12Mbps rate. " ::= { wlsxMonStaRateStatsEntry 12 } monStaTxPktsAt18Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets transmitted by the station at 18Mbps rate. " ::= { wlsxMonStaRateStatsEntry 13 } monStaTxBytesAt18Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets transmitted by the station at 18Mbps rate. " ::= { wlsxMonStaRateStatsEntry 14 } monStaTxPktsAt24Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets transmitted by the station at 24Mbps rate. " ::= { wlsxMonStaRateStatsEntry 15 } monStaTxBytesAt24Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets transmitted by the station at 24Mbps rate. " ::= { wlsxMonStaRateStatsEntry 16 } monStaTxPktsAt36Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets transmitted by the station at 36Mbps rate. " ::= { wlsxMonStaRateStatsEntry 17 } monStaTxBytesAt36Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets transmitted by the station at 36Mbps rate. " ::= { wlsxMonStaRateStatsEntry 18 } monStaTxPktsAt48Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets transmitted by the station at 48Mbps rate. " ::= { wlsxMonStaRateStatsEntry 19 } monStaTxBytesAt48Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets transmitted by the station at 48Mbps rate. " ::= { wlsxMonStaRateStatsEntry 20 } monStaTxPktsAt54Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets transmitted by the station at 54Mbps rate. " ::= { wlsxMonStaRateStatsEntry 21 } monStaTxBytesAt54Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets transmitted by the station at 54Mbps rate. " ::= { wlsxMonStaRateStatsEntry 22 } monStaRxPktsAt1Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 1Mbps rate. " ::= { wlsxMonStaRateStatsEntry 23 } monStaRxBytesAt1Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 1Mbps rate. " ::= { wlsxMonStaRateStatsEntry 24 } monStaRxPktsAt2Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 2Mbps rate. " ::= { wlsxMonStaRateStatsEntry 25 } monStaRxBytesAt2Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 2Mbps rate. " ::= { wlsxMonStaRateStatsEntry 26 } monStaRxPktsAt5Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 5Mbps rate. " ::= { wlsxMonStaRateStatsEntry 27 } monStaRxBytesAt5Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 5Mbps rate. " ::= { wlsxMonStaRateStatsEntry 28 } monStaRxPktsAt11Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 11Mbps rate. " ::= { wlsxMonStaRateStatsEntry 29 } monStaRxBytesAt11Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 11Mbps rate. " ::= { wlsxMonStaRateStatsEntry 30 } monStaRxPktsAt6Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 6Mbps rate. " ::= { wlsxMonStaRateStatsEntry 31 } monStaRxBytesAt6Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 6Mbps rate. " ::= { wlsxMonStaRateStatsEntry 32 } monStaRxPktsAt12Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 12Mbps rate. " ::= { wlsxMonStaRateStatsEntry 33 } monStaRxBytesAt12Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 12Mbps rate. " ::= { wlsxMonStaRateStatsEntry 34 } monStaRxPktsAt18Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 18Mbps rate. " ::= { wlsxMonStaRateStatsEntry 35 } monStaRxBytesAt18Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 18Mbps rate. " ::= { wlsxMonStaRateStatsEntry 36 } monStaRxPktsAt24Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 24Mbps rate. " ::= { wlsxMonStaRateStatsEntry 37 } monStaRxBytesAt24Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 24Mbps rate. " ::= { wlsxMonStaRateStatsEntry 38 } monStaRxPktsAt36Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 36Mbps rate. " ::= { wlsxMonStaRateStatsEntry 39 } monStaRxBytesAt36Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 36Mbps rate. " ::= { wlsxMonStaRateStatsEntry 40 } monStaRxPktsAt48Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 48Mbps rate. " ::= { wlsxMonStaRateStatsEntry 41 } monStaRxBytesAt48Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 48Mbps rate. " ::= { wlsxMonStaRateStatsEntry 42 } monStaRxPktsAt54Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 54Mbps rate. " ::= { wlsxMonStaRateStatsEntry 43 } monStaRxBytesAt54Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 54Mbps rate. " ::= { wlsxMonStaRateStatsEntry 44 } monStaTxPktsAt9Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Transmitted by the station at 9Mbps rate. " ::= { wlsxMonStaRateStatsEntry 45 } monStaTxBytesAt9Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Transmitted by the station at 9Mbps rate. " ::= { wlsxMonStaRateStatsEntry 46 } monStaRxPktsAt9Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Packets Received by the station at 9Mbps rate. " ::= { wlsxMonStaRateStatsEntry 47 } monStaRxBytesAt9Mbps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Octets Received by the station at 9Mbps rate. " ::= { wlsxMonStaRateStatsEntry 48 } -- This table breaks down the Station statistics based on the -- Destination Address Types. wlsxMonStaDATypeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxMonStaDATypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the Packet and Byte Counts for a monitored station but but broken down in terms of Destination Address Type. " ::= { wlsxMonStationStatsGroup 3} wlsxMonStaDATypeStatsEntry OBJECT-TYPE SYNTAX WlsxMonStaDATypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data rate based packet and byte count entry for a monitored station" INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress} ::= { wlsxMonStaDATypeStatsTable 1 } WlsxMonStaDATypeStatsEntry ::= SEQUENCE { monStaTxDABroadcastPkts Counter32 , monStaTxDABroadcastBytes Counter32 , monStaTxDAMulticastPkts Counter32 , monStaTxDAMulticastBytes Counter32 , monStaTxDAUnicastPkts Counter32 , monStaTxDAUnicastBytes Counter32 } monStaTxDABroadcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Broadcast packets transmitted by this Station. " ::= { wlsxMonStaDATypeStatsEntry 1 } monStaTxDABroadcastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Broadcast Bytes transmitted by this Station. " ::= { wlsxMonStaDATypeStatsEntry 2 } monStaTxDAMulticastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Multicast packets transmitted by this station. " ::= { wlsxMonStaDATypeStatsEntry 3 } monStaTxDAMulticastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of Multicast Bytes transmitted by this station. " ::= { wlsxMonStaDATypeStatsEntry 4 } monStaTxDAUnicastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total of Unicast packets transmitted by this station. " ::= { wlsxMonStaDATypeStatsEntry 5 } monStaTxDAUnicastBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the total of Unicast Bytes transmitted by this station. " ::= { wlsxMonStaDATypeStatsEntry 6 } -- This table breaks down the Station statistics based on the -- the Type of the Packet. wlsxMonStaFrameTypeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxMonStaFrameTypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the Packet and Byte Counts for monitored stations but broken down into different Frame Types. " ::= { wlsxMonStationStatsGroup 4} wlsxMonStaFrameTypeStatsEntry OBJECT-TYPE SYNTAX WlsxMonStaFrameTypeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Frame Type based packet and byte count entry for a monitored station" INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress} ::= { wlsxMonStaFrameTypeStatsTable 1 } WlsxMonStaFrameTypeStatsEntry ::= SEQUENCE { monStaTxMgmtPkts Counter32 , monStaTxMgmtBytes Counter32 , monStaTxCtrlPkts Counter32 , monStaTxCtrlBytes Counter32 , monStaTxDataPkts Counter32 , monStaTxDataBytes Counter32 , monStaRxMgmtPkts Counter32 , monStaRxMgmtBytes Counter32 , monStaRxCtrlPkts Counter32 , monStaRxCtrlBytes Counter32 , monStaRxDataPkts Counter32 , monStaRxDataBytes Counter32 } monStaTxMgmtPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the transmitted Management packets from a station. " ::= { wlsxMonStaFrameTypeStatsEntry 1 } monStaTxMgmtBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the transmitted Management Bytes from a station " ::= { wlsxMonStaFrameTypeStatsEntry 2 } monStaTxCtrlPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the transmitted Control packets from a station " ::= { wlsxMonStaFrameTypeStatsEntry 3 } monStaTxCtrlBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the transmitted Control Bytes from a station " ::= { wlsxMonStaFrameTypeStatsEntry 4 } monStaTxDataPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the transmitted Data packets from a station " ::= { wlsxMonStaFrameTypeStatsEntry 5 } monStaTxDataBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the transmitted Data Bytes observed from this station. " ::= { wlsxMonStaFrameTypeStatsEntry 6 } monStaRxMgmtPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of received Management packets at a station. " ::= { wlsxMonStaFrameTypeStatsEntry 7 } monStaRxMgmtBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of received Management Bytes at a station. " ::= { wlsxMonStaFrameTypeStatsEntry 8 } monStaRxCtrlPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of received Control packets at a station. " ::= { wlsxMonStaFrameTypeStatsEntry 9 } monStaRxCtrlBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of received Control Bytes at a station. " ::= { wlsxMonStaFrameTypeStatsEntry 10 } monStaRxDataPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of received Data packets at a station. " ::= { wlsxMonStaFrameTypeStatsEntry 11 } monStaRxDataBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of received Data Bytes at a station. " ::= { wlsxMonStaFrameTypeStatsEntry 12 } -- This table breaks down the Station statistics received or transmitted by a -- station into packet size buckets. wlsxMonStaPktSizeStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxMonStaPktSizeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the Packet and Byte Counts for monitored stations but broken down into different Packet Sizes. " ::= { wlsxMonStationStatsGroup 5} wlsxMonStaPktSizeStatsEntry OBJECT-TYPE SYNTAX WlsxMonStaPktSizeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Packet Size based packet count entry for a monitored station" INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress} ::= { wlsxMonStaPktSizeStatsTable 1 } WlsxMonStaPktSizeStatsEntry ::= SEQUENCE { monStaTxPkts63Bytes Counter32 , monStaTxPkts64To127 Counter32 , monStaTxPkts128To255 Counter32 , monStaTxPkts256To511 Counter32 , monStaTxPkts512To1023 Counter32 , monStaTxPkts1024To1518 Counter32 , monStaRxPkts63Bytes Counter32 , monStaRxPkts64To127 Counter32 , monStaRxPkts128To255 Counter32 , monStaRxPkts256To511 Counter32 , monStaRxPkts512To1023 Counter32 , monStaRxPkts1024To1518 Counter32 } monStaTxPkts63Bytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets transmitted by the station that were less than 64 bytes long. " ::= { wlsxMonStaPktSizeStatsEntry 1 } monStaTxPkts64To127 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets transmitted by the station that were between 64 and 127 bytes long. " ::= { wlsxMonStaPktSizeStatsEntry 2 } monStaTxPkts128To255 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets transmitted by the station that were between 128 and 255 bytes long. " ::= { wlsxMonStaPktSizeStatsEntry 3 } monStaTxPkts256To511 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets transmitted by the station that were between 256 and 511 bytes long. " ::= { wlsxMonStaPktSizeStatsEntry 4 } monStaTxPkts512To1023 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets transmitted by the station that were between 512 and 1023 bytes long. " ::= { wlsxMonStaPktSizeStatsEntry 5 } monStaTxPkts1024To1518 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets transmitted by the station that were between 1024 and 1518 bytes long. " ::= { wlsxMonStaPktSizeStatsEntry 6 } monStaRxPkts63Bytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets Received by the station that were less than 64 bytes long. " ::= { wlsxMonStaPktSizeStatsEntry 7 } monStaRxPkts64To127 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets Received by the station that were between 64 and 127 bytes long. " ::= { wlsxMonStaPktSizeStatsEntry 8 } monStaRxPkts128To255 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets Received by the station that were between 128 and 255 bytes long. " ::= { wlsxMonStaPktSizeStatsEntry 9 } monStaRxPkts256To511 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets Received by the station that were between 256 and 511 bytes long. " ::= { wlsxMonStaPktSizeStatsEntry 10 } monStaRxPkts512To1023 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets Received by the station that were between 512 and 1023 bytes long. " ::= { wlsxMonStaPktSizeStatsEntry 11 } monStaRxPkts1024To1518 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the number of packets Received by the station that were between 1024 and 1518 bytes long. " ::= { wlsxMonStaPktSizeStatsEntry 12 } -- Info group contains tables for monitored APs and stations wlsxMonAccessPointInfoGroup OBJECT IDENTIFIER ::= { wlsxMonInfoGroup 1 } wlsxMonStationInfoGroup OBJECT IDENTIFIER ::= { wlsxMonInfoGroup 2 } wlsxMonAPInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxMonAPInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This lists all of the Access Points being monitored by the controller. " ::= { wlsxMonAccessPointInfoGroup 1 } wlsxMonAPInfoEntry OBJECT-TYPE SYNTAX WlsxMonAPInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Access Point Info entry" INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID} ::= { wlsxMonAPInfoTable 1 } WlsxMonAPInfoEntry ::= SEQUENCE { monAPInfoPhyType ArubaPhyType, monAPInfoCurrentChannel Unsigned32, monAPInfoClassification ArubaRogueApType, monAPInfoESSID DisplayString, monAPInfoRSSI Integer32, monAPInfoMonitorTime TimeTicks, monAPInfoInactivityTime TimeTicks, monAPInfoSnrSignalPkts Integer32, monAPInfoSnrSampleTime Integer32, monAPInfoStatus INTEGER, monAPInfoConfidence Integer32, monAPInfoMatchType ArubaAPMatchType, monAPInfoMatchMethod ArubaAPMatchMethod, monAPInfoHTMode ArubaHTMode, monAPInfoEncryptionType ArubaMonEncryptionType, monAPInfoWPAUnicastCipher ArubaMonEncryptionCipher, monAPInfoWPAAuthAlgorithm ArubaMonAuthAlgorithm, monAPInfoIBSS TruthValue } monAPInfoPhyType OBJECT-TYPE SYNTAX ArubaPhyType MAX-ACCESS read-only STATUS current DESCRIPTION " PHY type of the access point being monitored. " ::= { wlsxMonAPInfoEntry 1 } monAPInfoCurrentChannel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Channel the monitored AP is using. " ::= { wlsxMonAPInfoEntry 2 } monAPInfoClassification OBJECT-TYPE SYNTAX ArubaRogueApType MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates the type of the AP. " ::= { wlsxMonAPInfoEntry 3 } monAPInfoESSID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " ESSID of the access point being monitored. " ::= { wlsxMonAPInfoEntry 4 } monAPInfoRSSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " SNR of the access point being monitored. " ::= { wlsxMonAPInfoEntry 5 } monAPInfoMonitorTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates how long the access point has been monitored. " ::= { wlsxMonAPInfoEntry 6 } monAPInfoInactivityTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates how long the access point has been inactive. " ::= { wlsxMonAPInfoEntry 7 } monAPInfoSnrSignalPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The Number of Signal Packets observed by the Monitoring AP during this sample time. " ::= { wlsxMonAPInfoEntry 8 } monAPInfoSnrSampleTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The Sample Time in which SNR data was collected. " ::= { wlsxMonAPInfoEntry 9 } monAPInfoStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates whether this AP is considered to be up or down. " ::= { wlsxMonAPInfoEntry 10 } monAPInfoConfidence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the confidence that a suspected rogue AP is in fact a rogue in terms of percentage. " ::= { wlsxMonAPInfoEntry 11 } monAPInfoMatchType OBJECT-TYPE SYNTAX ArubaAPMatchType MAX-ACCESS read-only STATUS current DESCRIPTION " The method used to classify the AP as a rogue or suspected rogue AP. " ::= { wlsxMonAPInfoEntry 12 } monAPInfoMatchMethod OBJECT-TYPE SYNTAX ArubaAPMatchMethod MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates how the match occurred for rogue or suspect-rogue classification: an exact or +1 or -1 MAC match. " ::= { wlsxMonAPInfoEntry 13 } monAPInfoHTMode OBJECT-TYPE SYNTAX ArubaHTMode MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the HT mode of the monitored AP, if any. " ::= { wlsxMonAPInfoEntry 14 } monAPInfoEncryptionType OBJECT-TYPE SYNTAX ArubaMonEncryptionType MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the Encryption type of the monitored AP. " ::= { wlsxMonAPInfoEntry 15 } monAPInfoWPAUnicastCipher OBJECT-TYPE SYNTAX ArubaMonEncryptionCipher MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the WPA/WPA2 unicast cipher supported by the monitored AP. If multiple ciphers are supported, the weakest will be indicated. " ::= { wlsxMonAPInfoEntry 16 } monAPInfoWPAAuthAlgorithm OBJECT-TYPE SYNTAX ArubaMonAuthAlgorithm MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the WPA/WPA2 authentication algorithm supported by the monitored AP. If multiple authentication algorithms are supported, the weakest will be indicated. " ::= { wlsxMonAPInfoEntry 17 } monAPInfoIBSS OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates if the monitored AP is part of an adhoc network. " ::= { wlsxMonAPInfoEntry 18 } wlsxMonStationInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF MonStationInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This Table lists statistics of all the wireless stations being monitored. " ::= { wlsxMonStationInfoGroup 1} wlsxMonStationInfoEntry OBJECT-TYPE SYNTAX MonStationInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Station Info Entry" INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress} ::= { wlsxMonStationInfoTable 1 } MonStationInfoEntry ::= SEQUENCE { monStaInfoChannelNum Unsigned32, monStaInfoBSSID MacAddress, monStaInfoESSID DisplayString, monStaInfoPhyType ArubaPhyType, monStaInfoRSSI Integer32, monStaInfoClassification ArubaStationType, monStaInfoMonitorTime TimeTicks, monStaInfoInactivityTime TimeTicks, monStaInfoSnrSignalPkts Integer32, monStaInfoSnrSampleTime Integer32, monStaInfoStatus INTEGER, monStaInfoHTMode ArubaHTMode } monStaInfoChannelNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The channel the station is currently using. " ::= { wlsxMonStationInfoEntry 1 } monStaInfoBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " BSSID of the station being monitored. " ::= { wlsxMonStationInfoEntry 2 } monStaInfoESSID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " ESSID of the station being monitored. " ::= { wlsxMonStationInfoEntry 3 } monStaInfoPhyType OBJECT-TYPE SYNTAX ArubaPhyType MAX-ACCESS read-only STATUS current DESCRIPTION " PHY type the station being monitored. " ::= { wlsxMonStationInfoEntry 4 } monStaInfoRSSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " SNR of the station being monitored. " ::= { wlsxMonStationInfoEntry 5 } monStaInfoClassification OBJECT-TYPE SYNTAX ArubaStationType MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { wlsxMonStationInfoEntry 6 } monStaInfoMonitorTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates how long the station has been monitored. " ::= { wlsxMonStationInfoEntry 7 } monStaInfoInactivityTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute indicates how long the station has been inactive. " ::= { wlsxMonStationInfoEntry 8 } monStaInfoSnrSignalPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The Number of Signal Packets observed by the Monitoring station during this sample time. " ::= { wlsxMonStationInfoEntry 9 } monStaInfoSnrSampleTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The Sample Time in which SNR data was collected. " ::= { wlsxMonStationInfoEntry 10 } monStaInfoStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates whether this station is considered up or down. " ::= { wlsxMonStationInfoEntry 11 } monStaInfoHTMode OBJECT-TYPE SYNTAX ArubaHTMode MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the HT mode of the station, if any. " ::= { wlsxMonStationInfoEntry 12 } -- Event table contains the event ID and the number of events of that type -- raised so far wlsxMonEventCountTable OBJECT-TYPE SYNTAX SEQUENCE OF MonEventCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This Table lists counts of Events generated by the APs. " ::= { wlsxMonStationStatsGroup 6} wlsxMonEventCountEntry OBJECT-TYPE SYNTAX MonEventCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event Count Entry" INDEX {monEventID} ::= { wlsxMonEventCountTable 1 } MonEventCountEntry ::= SEQUENCE { monEventID Unsigned32, monEventCount Unsigned32 } monEventID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Event ID " ::= { wlsxMonEventCountEntry 1 } monEventCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Event Count " ::= { wlsxMonEventCountEntry 2 } -- This table breaks down the station statistics observed into different -- HT rate categories. wlsxMonStationHTRateStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxMonStationHTRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table contains all the monitored AP Packet and Byte Counts but represented in terms of HT rate categories. " ::= { wlsxMonStationStatsGroup 7 } wlsxMonStationHTRateStatsEntry OBJECT-TYPE SYNTAX WlsxMonStationHTRateStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "HT Data rate based packet and byte count entry for a monitored station" INDEX { monPhyAddress, monRadioNumber, monitoredStaPhyAddress, monHTRate } ::= { wlsxMonStationHTRateStatsTable 1 } WlsxMonStationHTRateStatsEntry ::= SEQUENCE { monStaTxHTPkts Counter32, monStaTxHTBytes Counter32, monStaRxHTPkts Counter32, monStaRxHTBytes Counter32 } monStaTxHTPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The total number of packets transmitted at the indicated rate " ::= { wlsxMonStationHTRateStatsEntry 1 } monStaTxHTBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The total number of bytes transmitted at the indicated rate " ::= { wlsxMonStationHTRateStatsEntry 2 } monStaRxHTPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The total number of packets received at the indicated rate " ::= { wlsxMonStationHTRateStatsEntry 3 } monStaRxHTBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The total number of bytes received at the indicated rate " ::= { wlsxMonStationHTRateStatsEntry 4 } END