--- ArubaOS 8.8.0.1_80393
-- vim: set ts=4 sw=4:
WLSX-SNR-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       TEXTUAL-CONVENTION FROM SNMPv2-TC 
       
       MODULE-IDENTITY,
       OBJECT-TYPE,
       snmpModules,
       Integer32,
	   Counter32,
	   IpAddress,
	   NOTIFICATION-TYPE
           FROM SNMPv2-SMI

       TDomain,
       DisplayString,
       PhysAddress,
       TAddress,
       TimeInterval,
       RowStatus,
       StorageType,
       TestAndIncr,
	   MacAddress,
	   TruthValue
           FROM SNMPv2-TC

       OBJECT-GROUP
           FROM SNMPv2-CONF
	  monPhyAddress, 
	  monRadioNumber, 
	  monitoredStaPhyAddress,
	  monitoredApBSSID
			FROM WLSX-MON-MIB
		wlsxEnterpriseMibModules
			FROM ARUBA-MIB;

   wlsxSNRMIB MODULE-IDENTITY 
       LAST-UPDATED "202008141745Z"
       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
       CONTACT-INFO
            "Postal:    3333 Scott Blvd,
                        Santa Clara, CA 95054
            E-mail:     aruba-ext-eng-reg@hpe.com
            Phone:      408 227 4500
            Fax:        408 752 0626"
       DESCRIPTION
           "
		   This MIB module defines MIB objects which provide
           information about the Wireless Management System (WMS) in the 
		   Aruba controller.
		   "
       REVISION        "202008141745Z"
       DESCRIPTION
           "The initial revision."
       ::= { wlsxEnterpriseMibModules 7 }

   wlsxSNRGroup     		OBJECT IDENTIFIER ::= { wlsxSNRMIB 1 }

 -- AP SNR Table

   wlsxAPSnrTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxAPSnrEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This Table lists SNR information about monitored APs. 
		"
      ::= { wlsxSNRGroup 1 } 

   wlsxAPSnrEntry OBJECT-TYPE 
	  SYNTAX       WlsxAPSnrEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Station Management Entry"
	  INDEX {monPhyAddress, monRadioNumber, monitoredApBSSID}
      ::= { wlsxAPSnrTable 1 } 

   WlsxAPSnrEntry ::=
     SEQUENCE {
		 apSnrAverageSignalStrength		Integer32,
		 apSnrSignalPkts					Integer32,
		 apSnrHighestRxSignalStrength		Integer32,
		 apSnrLowestRxSignalStrength		Integer32,
		 apSnrSampleTime					Integer32
   }

   apSnrAverageSignalStrength OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Total Signal Strength observed by the Monitoring station 
			during this sample time.
            "
        ::= { wlsxAPSnrEntry 1 }

   apSnrSignalPkts OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Number of Signal Packets observed by the Monitoring station 
			during this sample time.
            "
        ::= { wlsxAPSnrEntry 2 }

   apSnrHighestRxSignalStrength OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Highest Signal Strength observed by the Monitoring station 
			during this sample time.
            "
        ::= { wlsxAPSnrEntry 3 }

   apSnrLowestRxSignalStrength OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Lowest Signal Strength observed by the Monitoring station 
			during this sample time.
            "
        ::= { wlsxAPSnrEntry 4 }


   apSnrSampleTime OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Sample Time in which this data is collected.
            "
        ::= { wlsxAPSnrEntry 5 }

 -- Station SNR Table

   wlsxStaSnrTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxStaSnrEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This Table lists SNR information about monitored stations. 
		"
      ::= { wlsxSNRGroup 2 } 

   wlsxStaSnrEntry OBJECT-TYPE 
	  SYNTAX       WlsxStaSnrEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Station Management Entry"
	  INDEX {monPhyAddress, monRadioNumber, monitoredStaPhyAddress}
      ::= { wlsxStaSnrTable 1 } 

   WlsxStaSnrEntry ::=
     SEQUENCE {
		 staSnrAverageSignalStrength		Integer32,
		 staSnrSignalPkts					Integer32,
		 staSnrHighestRxSignalStrength		Integer32,
		 staSnrLowestRxSignalStrength		Integer32,
		 staSnrSampleTime					Integer32
   }

   staSnrAverageSignalStrength OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Total Signal Strength observed by the Monitoring station 
			during this sample time.
            "
        ::= { wlsxStaSnrEntry 1 }

   staSnrSignalPkts OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Number of Signal Packets observed by the Monitoring station 
			during this sample time.
            "
        ::= { wlsxStaSnrEntry 2 }

   staSnrHighestRxSignalStrength OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Highest Signal Strength observed by the Monitoring station 
			during this sample time.
            "
        ::= { wlsxStaSnrEntry 3 }

   staSnrLowestRxSignalStrength OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Lowest Signal Strength observed by the Monitoring station 
			during this sample time.
            "
        ::= { wlsxStaSnrEntry 4 }


   staSnrSampleTime OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Sample Time in which this data is collected.
            "
        ::= { wlsxStaSnrEntry 5 }


 -- AP SNR Table Ordered by the BSSID

   wlsxAPSnrBSSIDTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxAPSnrBSSIDEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This Table SNR information about monitored APs. 
		"
      ::= { wlsxSNRGroup 3 } 

   wlsxAPSnrBSSIDEntry OBJECT-TYPE 
	  SYNTAX       WlsxAPSnrBSSIDEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Station Management Entry"
	  INDEX {monitoredApBSSID, monPhyAddress, monRadioNumber}
      ::= { wlsxAPSnrBSSIDTable 1 } 

   WlsxAPSnrBSSIDEntry ::=
     SEQUENCE {
		 apSnrBSSIDAverageSignalStrength		Integer32,
		 apSnrBSSIDSignalPkts					Integer32,
		 apSnrBSSIDHighestRxSignalStrength		Integer32,
		 apSnrBSSIDLowestRxSignalStrength		Integer32,
		 apSnrBSSIDSampleTime					Integer32
   }

   apSnrBSSIDAverageSignalStrength OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Total Signal Strength observed by the Monitoring station 
			during this sample time.
            "
        ::= { wlsxAPSnrBSSIDEntry 1 }

   apSnrBSSIDSignalPkts OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Number of Signal Packets observed by the Monitoring station 
			during this sample time.
            "
        ::= { wlsxAPSnrBSSIDEntry 2 }

   apSnrBSSIDHighestRxSignalStrength OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Highest Signal Strength observed by the Monitoring station 
			during this sample time.
            "
        ::= { wlsxAPSnrBSSIDEntry 3 }

   apSnrBSSIDLowestRxSignalStrength OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Lowest Signal Strength observed by the Monitoring station 
			during this sample time.
            "
        ::= { wlsxAPSnrBSSIDEntry 4 }


   apSnrBSSIDSampleTime OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Sample Time in which this data is collected.
            "
        ::= { wlsxAPSnrBSSIDEntry 5 }

 -- Station SNR Station Phy Table

   wlsxStaSnrPhyTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxStaSnrPhyEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This Table lists SNR information about monitored stations. 
		"
      ::= { wlsxSNRGroup 4 } 

   wlsxStaSnrPhyEntry OBJECT-TYPE 
	  SYNTAX       WlsxStaSnrPhyEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Station Management Entry"
	  INDEX {monitoredStaPhyAddress, monPhyAddress, monRadioNumber}
      ::= { wlsxStaSnrPhyTable 1 } 

   WlsxStaSnrPhyEntry ::=
     SEQUENCE {
		 staSnrPhyAverageSignalStrength		Integer32,
		 staSnrPhySignalPkts					Integer32,
		 staSnrPhyHighestRxSignalStrength		Integer32,
		 staSnrPhyLowestRxSignalStrength		Integer32,
		 staSnrPhySampleTime					Integer32
   }

   staSnrPhyAverageSignalStrength OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Total Signal Strength observed by the Monitoring station 
			during this sample time.
            "
        ::= { wlsxStaSnrPhyEntry 1 }

   staSnrPhySignalPkts OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Number of Signal Packets observed by the Monitoring station 
			during this sample time.
            "
        ::= { wlsxStaSnrPhyEntry 2 }

   staSnrPhyHighestRxSignalStrength OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Highest Signal Strength observed by the Monitoring station 
			during this sample time.
            "
        ::= { wlsxStaSnrPhyEntry 3 }

   staSnrPhyLowestRxSignalStrength OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Lowest Signal Strength observed by the Monitoring station 
			during this sample time.
            "
        ::= { wlsxStaSnrPhyEntry 4 }


   staSnrPhySampleTime OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Sample Time in which this data is collected.
            "
        ::= { wlsxStaSnrPhyEntry 5 }
END