--- ArubaOS 8.8.0.1_80393
-- vim:set ts=4 sw=4:
   WLSX-SWITCH-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       TEXTUAL-CONVENTION FROM SNMPv2-TC 
       
       MODULE-IDENTITY,
       OBJECT-TYPE,
       snmpModules,
       Integer32,
	   Counter32,
	   IpAddress,
	   NOTIFICATION-TYPE
           FROM SNMPv2-SMI

       TDomain,
       DisplayString,
       PhysAddress,
       TAddress,
       TimeInterval,
       RowStatus,
       StorageType,
       TestAndIncr,
	   MacAddress,
	   TruthValue
           FROM SNMPv2-TC

       OBJECT-GROUP
           FROM SNMPv2-CONF
		wlsxEnterpriseMibModules
			FROM ARUBA-MIB;

   wlsxSwitchMIB MODULE-IDENTITY
       LAST-UPDATED "202008141745Z"
       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
       CONTACT-INFO
            "Postal:    3333 Scott Blvd,
                        Santa Clara, CA 95054
            E-mail:     aruba-ext-eng-reg@hpe.com
            Phone:      408 227 4500
            Fax:        408 752 0626" 
       DESCRIPTION
           "This MIB module defines MIB objects which provide
            System level information about the Aruba switches."
       REVISION        "202008141745Z"
       DESCRIPTION
           "The initial revision."
       ::= { wlsxEnterpriseMibModules 1 }

   wlsxSystemXGroup         	OBJECT IDENTIFIER ::= { wlsxSwitchMIB 1 }
   wlsxUserInfoGroup         	OBJECT IDENTIFIER ::= { wlsxSwitchMIB 2 }
   wlsxAccessPointInfoGroup     OBJECT IDENTIFIER ::= { wlsxSwitchMIB 3 }
   wlsxInstantAccessPointInfoGroup      OBJECT IDENTIFIER ::= { wlsxSwitchMIB 5 }
   wlsxSwitchTraps         	OBJECT IDENTIFIER ::= { wlsxSwitchMIB 100 }

   -- wlsxSystemXGroup contains objects to describe a switch.

   wlsxHostname OBJECT-TYPE
        SYNTAX       DisplayString (SIZE(1..32))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"Name of the switch."
        ::= { wlsxSystemXGroup 1 }

   wlsxModelName OBJECT-TYPE
        SYNTAX       DisplayString (SIZE(1..32))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"Model Name of the switch."
        ::= { wlsxSystemXGroup 2 }

   wlsxSwitchIp OBJECT-TYPE
        SYNTAX       IpAddress
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"Switch IP as configured by the user. This IP address uniquely 
			identifies the switch."
        ::= { wlsxSystemXGroup 3 }

   wlsxSwitchRole OBJECT-TYPE
        SYNTAX      INTEGER {
						master(1),
						local(2),
						standbymaster(3),
						branch(4),
						md(5)
						}
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"Role of this switch in the Switch Domain."
        ::= { wlsxSystemXGroup 4 }

   wlsxSwitchMasterIp OBJECT-TYPE
        SYNTAX       IpAddress
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"
			 Master IP of the switch
			"
        ::= { wlsxSystemXGroup 5 }


-- Switch List Table contains all the switches in the domain. This table is 
-- valid only when queried from the master switch.

   wlsxSwitchListTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF MxSwitchListEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"This Table will list all the switches in the Switch Domain.
		 It will be populated only on the master switch. Local switches
		 return empty table.
		"
	
      ::= { wlsxSystemXGroup 6 } 

     wlsxSwitchListEntry OBJECT-TYPE 
	  SYNTAX       MxSwitchListEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Switch List Entry"
	  INDEX { switchListSwitchIPAddress}
      ::= { wlsxSwitchListTable 1 } 

     MxSwitchListEntry ::=
     SEQUENCE {
         switchListSwitchIPAddress	IpAddress,
         switchListSwitchRole 		INTEGER
     }

     switchListSwitchIPAddress OBJECT-TYPE
         SYNTAX       IpAddress
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			IP Address of the switch.
            "
        ::= { wlsxSwitchListEntry 1 }

     switchListSwitchRole OBJECT-TYPE
        SYNTAX      INTEGER {
						master(1),
						local(2),
						standbymaster(3),
						branch(4),
						md(5)
					}
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 Role of the Switch.
            "
        ::= { wlsxSwitchListEntry 2 }


   wlsxSwitchLicenseCount OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"
			 The number of licenses installed on the switch
			"
        ::= { wlsxSystemXGroup 7 }


-- The license table lists all valid licenses installed on the switch

   wlsxSwitchLicenseTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF LicenseEntry
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"This table lists all licenses installed on the switch.
		"
	
      ::= { wlsxSystemXGroup 8 } 

     wlsxLicenseEntry OBJECT-TYPE 
	  SYNTAX       LicenseEntry
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "License Entry"
	  INDEX { licenseIndex }
      ::= { wlsxSwitchLicenseTable 1 } 

     LicenseEntry ::=
     SEQUENCE {
     	 licenseIndex           Integer32,
         licenseKey				DisplayString,
         licenseInstalled		DisplayString,
         licenseExpires			DisplayString,
         licenseFlags			DisplayString,
         licenseService 		DisplayString
     }

     licenseIndex OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			License ID number
            "
        ::= { wlsxLicenseEntry 1 }

     licenseKey OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			License Key
            "
        ::= { wlsxLicenseEntry 2 }

     licenseInstalled OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			License installation time
            "
        ::= { wlsxLicenseEntry 3 }

     licenseExpires OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			License expiry time
            "
        ::= { wlsxLicenseEntry 4 }

     licenseFlags OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			License flags; E - enabled; A - auto-generated;
			               R - reboot required to activate
            "
        ::= { wlsxLicenseEntry 5 }

     licenseService OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The service enabled by this license.
            "
        ::= { wlsxLicenseEntry 6 }

-- Table lists all the processors and there corresponding Load.

   wlsxSysXProcessorTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxSysXProcessorEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			The table of processors contained by the switch.
		"
      ::= { wlsxSystemXGroup 9 } 

   wlsxSysXProcessorEntry OBJECT-TYPE 
	  SYNTAX       WlsxSysXProcessorEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  "
	  	An entry for one processor contained by the switch.
	  "
	  INDEX { sysXProcessorID}
      ::= { wlsxSysXProcessorTable 1 } 

   WlsxSysXProcessorEntry ::=
     SEQUENCE {
         sysXProcessorID		Integer32,
         sysXProcessorDescr 	DisplayString,
		 sysXProcessorLoad		Integer32
     }

   sysXProcessorID OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			Processor Index.
            "
        ::= { wlsxSysXProcessorEntry 1 }

   sysXProcessorDescr OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..64))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "
			description of the processor.
            "
        ::= { wlsxSysXProcessorEntry 2 }

   sysXProcessorLoad OBJECT-TYPE
        SYNTAX       Integer32 (0..100)
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"
			The average, over the last minute, of the percentage of
			time that this processor was not idle.
			"
        ::= { wlsxSysXProcessorEntry 3 }

-- Table contains all the storage devices in the switch and there 
-- utilization numbers.

   wlsxSysXStorageTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxSysXStorageEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
		"
		The table of Storage-devices contained by the switch.
		"
	
      ::= { wlsxSystemXGroup 10 } 

   wlsxSysXStorageEntry OBJECT-TYPE 
	  SYNTAX       WlsxSysXStorageEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "
			 	An entry for one long-term storage device contained by the 
				switch.
			 "
	  INDEX { sysXStorageIndex }
      ::= { wlsxSysXStorageTable 1 } 

   WlsxSysXStorageEntry ::=
     SEQUENCE {
        sysXStorageIndex	Integer32,
        sysXStorageType 	INTEGER,
	 	sysXStorageSize		Integer32,
	 	sysXStorageUsed		Integer32,
	 	sysXStorageName		DisplayString
   }

   sysXStorageIndex OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
            "
        ::= { wlsxSysXStorageEntry 1 }

   sysXStorageType OBJECT-TYPE
        SYNTAX      INTEGER {
					ram(1),
					flashMemory(2)
		  	    }

         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
            "
        ::= { wlsxSysXStorageEntry 2 }

   sysXStorageSize OBJECT-TYPE
        SYNTAX      Integer32

         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
	    		size of the storage filesystem in MB.
            "
        ::= { wlsxSysXStorageEntry 3 }

   sysXStorageUsed OBJECT-TYPE
        SYNTAX      Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
	    		size of the storage filesystem in MB.
            "
        ::= { wlsxSysXStorageEntry 4 }

   sysXStorageName OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..64))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "
			name of the storage filesystem.
            "
        ::= { wlsxSysXStorageEntry 5 }

-- This table describes the memory utilization of the switch

   wlsxSysXMemoryTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxSysXMemoryEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
		"
		The memory status of the switch
		"
	
      ::= { wlsxSystemXGroup 11 } 

   wlsxSysXMemoryEntry OBJECT-TYPE 
	  SYNTAX       WlsxSysXMemoryEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "
		An entry for one memory region on the switch.  Currently,
		only the CP region is monitored.
	     "
	  INDEX { sysXMemoryIndex }
      ::= { wlsxSysXMemoryTable 1 } 

   WlsxSysXMemoryEntry ::=
     SEQUENCE {
         sysXMemoryIndex	Integer32,
	 	sysXMemorySize	Integer32,
	 	sysXMemoryUsed	Integer32,
	 	sysXMemoryFree	Integer32
   }

   sysXMemoryIndex OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
            "
        ::= { wlsxSysXMemoryEntry 1 }

   sysXMemorySize OBJECT-TYPE
        SYNTAX      Integer32

         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
	    		Total memory in KB.
            "
        ::= { wlsxSysXMemoryEntry 2 }

   sysXMemoryUsed OBJECT-TYPE
        SYNTAX      Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
	    		Used memory in KB.
            "
        ::= { wlsxSysXMemoryEntry 3 }

   sysXMemoryFree OBJECT-TYPE
        SYNTAX      Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
	    		Free memory in KB.
            "
        ::= { wlsxSysXMemoryEntry 4 }

   wlsxSwitchLicenseSerialNumber OBJECT-TYPE
        SYNTAX       DisplayString
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"
			 The license serial number of the switch
			"
        ::= { wlsxSystemXGroup 12 }

   wlsxSwitchIpv6 OBJECT-TYPE
        SYNTAX       DisplayString(SIZE(0..128))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "Switch IPv6 as configured by the user. This IPv6 address uniquely
            identifies the switch."
        ::= { wlsxSystemXGroup 13 }

   wlsxSwitchMasterIpv6 OBJECT-TYPE
        SYNTAX       DisplayString(SIZE(0..45))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "
             Master IPv6 address of the switch
            "
        ::= { wlsxSystemXGroup 14 }

-- wlsxUserInfoGroup contains information about the users connected to the switch.

   wlsxSwitchUserTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF MxSwitchUserEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This Table lists all the users (both wired and wireless) currently
			connected to the switch. Users are identified by their IP address.
		"
	
      ::= { wlsxUserInfoGroup 1 } 

     wlsxSwitchUserEntry OBJECT-TYPE 
	  SYNTAX       MxSwitchUserEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "User Entry"
	  INDEX { userIpAddress}
      ::= { wlsxSwitchUserTable 1 } 

     MxSwitchUserEntry ::=
     SEQUENCE {
         userIpAddress				IpAddress,
         userPhyAddress 			MacAddress,
		 userName					DisplayString,
		 userRole					DisplayString,
		 userUpTime					TimeTicks,
		 userAuthenticationMethod	INTEGER,
		 userLocation				DisplayString,
		 userServerName				DisplayString,
		 userConnectedVlan			Integer32,
		 userConnectedSlot			Integer32,
		 userConnectedPort			Integer32,
		 userBWContractName			DisplayString,
		 userBWContractUsage		INTEGER,
		 userConnectedModule		INTEGER

     }

     userIpAddress OBJECT-TYPE
         SYNTAX       IpAddress
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			IP Address from which the user connected to the switch.
            "
        ::= { wlsxSwitchUserEntry 1 }

     userPhyAddress OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Physical Address of the station from which the user connected to 
			the switch.
            "
        ::= { wlsxSwitchUserEntry 2 }

     userName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 Name of the User.
            "
        ::= { wlsxSwitchUserEntry 3 }

     userRole OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Role configured for this user.
            "
        ::= { wlsxSwitchUserEntry 4 }

		 
     userUpTime OBJECT-TYPE
         SYNTAX       TimeTicks
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 Time since the user is connected to the switch.	
            "
        ::= { wlsxSwitchUserEntry 5 }

     userAuthenticationMethod OBJECT-TYPE
         SYNTAX       INTEGER {
						none(1),
						other(2),
						web(3),
						dot1x(4),
						vpn(5),
						mac(6)
						}
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Authentication mechanism used by the user to connect to the switch.
            "
        ::= { wlsxSwitchUserEntry 6 }

     userLocation OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Location of the access point (in Building.Floor.... format), which
			the user used to connect to the switch.
            "
        ::= { wlsxSwitchUserEntry 7 }

     userServerName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Name of the Back-end authentication server, used to authenticate
			the user.
            "
        ::= { wlsxSwitchUserEntry 8 }

     userConnectedVlan OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Vlan on which the user is connected to the switch.
            "
        ::= { wlsxSwitchUserEntry 9 }

     userConnectedSlot OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Slot on switch, where the user connection terminates.
            "
        ::= { wlsxSwitchUserEntry 10 }

     userConnectedPort OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Port on switch, where the user connection terminates.
            "
        ::= { wlsxSwitchUserEntry 11 }

     userBWContractName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Name of the Bandwidth Contract applied to this user.
            "
        ::= { wlsxSwitchUserEntry 12 }

     userBWContractUsage OBJECT-TYPE
         SYNTAX       INTEGER {
							user(1),
							shared(2)
					  }
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates how the Bandwidth Contract is used.
            "
        ::= { wlsxSwitchUserEntry 13 }

     userConnectedModule OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
            The module to which the user is connected, if wired.
            "
        ::= { wlsxSwitchUserEntry 14 }


  -- StationMgmt Table
  --Station Management Table contains all the station associated with this AP.

   wlsxSwitchStationMgmtTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF MxSwitchStationMgmtEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This Table lists all the wireless stations associated with the 
			Access points connected to this switch. 
		"
	
      ::= { wlsxUserInfoGroup 2 } 

   wlsxSwitchStationMgmtEntry OBJECT-TYPE 
	  SYNTAX       MxSwitchStationMgmtEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Station Management Entry"
	  INDEX {staPhyAddress, staAccessPointBSSID}
      ::= { wlsxSwitchStationMgmtTable 1 } 

   MxSwitchStationMgmtEntry ::=
     SEQUENCE {
         staPhyAddress				MacAddress,
		 staAccessPointBSSID		MacAddress,
		 staUserName				DisplayString,
		 staUserRole				DisplayString,
		 staAssociationID			Unsigned32,
		 staAccessPointESSID		DisplayString,
		 staSignalToNoiseRatio		Integer32,
		 staTransmitRate			INTEGER,
		 staReceiveRate				INTEGER
   }

   	staPhyAddress OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			The Physical Address of the Station.
            "
        ::= { wlsxSwitchStationMgmtEntry 1 }

	staAccessPointBSSID OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			BSSID of the Access point through which the station is connected
			to the switch
            "
        ::= { wlsxSwitchStationMgmtEntry 2 }

	staUserName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Name of the User connecting from this station.
            "
        ::= { wlsxSwitchStationMgmtEntry 3 }

	staUserRole OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			User Role.
            "
        ::= { wlsxSwitchStationMgmtEntry 4 }

	staAssociationID OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			AID with which the Station is associated with this system.
            "
        ::= { wlsxSwitchStationMgmtEntry 5 }

	staAccessPointESSID OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			ESSID of the Access point
            "
        ::= { wlsxSwitchStationMgmtEntry 6 }

   	staSignalToNoiseRatio OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			SNR for the BSSID.
            "
        ::= { wlsxSwitchStationMgmtEntry 7 }

   	staTransmitRate OBJECT-TYPE
         SYNTAX       INTEGER{
		 				rate1Mbps(1),
						rate2Mbps(2),
						rate5point5Mbps(3),
						rate6Mbps(4),
						rate9Mbps(5),
						rate11Mbps(6),
						rate12Mbps(7),
						rate18Mbps(8),
						rate24Mbps(9),
						rate36Mbps(10),
						rate48Mbps(11),
						rate54Mbps(12)
		 			  }
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates Transmit rate of the channel
            "
        ::= { wlsxSwitchStationMgmtEntry 8 }

   	staReceiveRate OBJECT-TYPE
         SYNTAX       INTEGER{
		 				rate1Mbps(1),
						rate2Mbps(2),
						rate5point5Mbps(3),
						rate6Mbps(4),
						rate9Mbps(5),
						rate11Mbps(6),
						rate12Mbps(7),
						rate18Mbps(8),
						rate24Mbps(9),
						rate36Mbps(10),
						rate48Mbps(11),
						rate54Mbps(12)
		 			  }
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates Receive rate of the channel
            "
        ::= { wlsxSwitchStationMgmtEntry 9 }


  -- StationStats Table
  --Station Statistics Table contains a summary of statistics collected by the
  --switch. The stats are indexed by Station Mac and AP BSSID it is associated
  --to.

   wlsxSwitchStationStatsTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF MxSwitchStationStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This Table lists the statistics of all the wireless stations 
			associated with the Access points connected to this switch. 
		"
	
      ::= { wlsxUserInfoGroup 3 } 

   wlsxSwitchStationStatsEntry OBJECT-TYPE 
	  SYNTAX       MxSwitchStationStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Station Statistics Entry"
	  INDEX {staPhyAddress, staAccessPointBSSID}
      ::= { wlsxSwitchStationStatsTable 1 } 

   MxSwitchStationStatsEntry ::=
     SEQUENCE {
		 staTxPackets				Counter32,
		 staTxBytes				Counter32,
		 staRxPackets				Counter32,
		 staRxBytes				Counter32,
		 staBwRate				Integer32,
		 staFrameRetryRate		Integer32,
		 staFrameLowSpeedRate		Integer32,
		 staFrameNonUnicastRate		Integer32,
		 staFrameFragmentationRate		Integer32,
		 staFrameReceiveErrorRate		Integer32
     }

   	staTxPackets OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Packets Transmitted by the station.
            "
        ::= { wlsxSwitchStationStatsEntry 1 }

   	staTxBytes OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Bytes Transmitted by the station.
			"
        ::= { wlsxSwitchStationStatsEntry 2 }

   	staRxPackets OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Packets Received by the Station
            "
        ::= { wlsxSwitchStationStatsEntry 3 }

   	staRxBytes OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Bytes Received by the station.
            "
        ::= { wlsxSwitchStationStatsEntry 4 }

   	staBwRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Bandwidth Rate in Kbps of the station.
            "
        ::= { wlsxSwitchStationStatsEntry 5 }

   	staFrameRetryRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Station Frame Retry Rate.
            "
        ::= { wlsxSwitchStationStatsEntry 6 }

   	staFrameLowSpeedRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Station Frame Low Speed Rate.
            "
        ::= { wlsxSwitchStationStatsEntry 7 }

   	staFrameNonUnicastRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Station Frame Non Unicast Packet Rate.
            "
        ::= { wlsxSwitchStationStatsEntry 8 }

   	staFrameFragmentationRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Station Frame Fragmentation Rate.
            "
        ::= { wlsxSwitchStationStatsEntry 9 }

   	staFrameReceiveErrorRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Station Frame Receive Error Rate.
            "
        ::= { wlsxSwitchStationStatsEntry 10 }

-- wlsxAccessPointInfoGroup contains a Local Access Point Information Table.
-- which lists all the AP's connected to this switch, a Global AP Info Table
-- which lists all the AP's in the Domain. The Global table is valid only
-- on the Master switch. The Group also contains two scalar objects which 
-- indicate the total number of AP's and the total number of Clients connected.


   wlsxSwitchTotalNumAccessPoints  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Number of Access Points Connected to this switch.
            "
        ::= { wlsxAccessPointInfoGroup 1 }

   wlsxSwitchTotalNumStationsAssociated  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Number of Stations Associated to this switch.
            "
        ::= { wlsxAccessPointInfoGroup 2 }

-- Local Access Point Table.

   wlsxSwitchAccessPointTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF MxSwitchAccessPointEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This Table lists all the Access Points Connected to this switch. 
		"
      ::= { wlsxAccessPointInfoGroup 3 } 

   wlsxSwitchAccessPointEntry OBJECT-TYPE 
	  SYNTAX       MxSwitchAccessPointEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "Station Management Entry"
	  INDEX {apBSSID}
      ::= { wlsxSwitchAccessPointTable 1 } 

   MxSwitchAccessPointEntry ::=
     SEQUENCE {
         apBSSID				MacAddress,
		 apESSID				DisplayString,
		 apSlot					Unsigned32,
		 apPort					Unsigned32,
		 apIpAddress			IpAddress,
		 apPhyType				INTEGER,
		 apType					INTEGER,
		 apCurrentChannel		INTEGER,
		 apLocation				DisplayString,
		 apTotalTime			TimeTicks,
		 apInactiveTime			TimeTicks,
		 apLoadBalancing		TruthValue,
		 apChannelNoise			Integer32,
		 apSignalToNoiseRatio	Integer32,
		 apTransmitRate			INTEGER,
		 apReceiveRate			INTEGER
   }

   	apBSSID OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			The Physical Address of the Access Point.
            "
        ::= { wlsxSwitchAccessPointEntry 1 }

   	apESSID OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			ESSID of the Access Point
            "
        ::= { wlsxSwitchAccessPointEntry 2 }

   	apSlot OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Slot to which the Access Point is connected.
            "
        ::= { wlsxSwitchAccessPointEntry 3 }

   	apPort OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Port to which the Access Point is connected.
            "
        ::= { wlsxSwitchAccessPointEntry 4 }

   	apIpAddress OBJECT-TYPE
         SYNTAX       IpAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Address of the Access Point.
            "
        ::= { wlsxSwitchAccessPointEntry 5 }

   	apPhyType OBJECT-TYPE
         SYNTAX       INTEGER{
						dot11a(1),
						dot11b(2),
						dot11g(3)
					  }
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Physical Layer Protocol support of the AP.
            "
        ::= { wlsxSwitchAccessPointEntry 6 }

   	apType OBJECT-TYPE
         SYNTAX       INTEGER{
						ap(1),
						am(2)
					  }
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates whether the Access point is an Air Monitor or regular AP.
            "
        ::= { wlsxSwitchAccessPointEntry 7 }

   	apCurrentChannel OBJECT-TYPE
         SYNTAX       INTEGER(1..165)
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Current Operating frequency channel.
            "
        ::= { wlsxSwitchAccessPointEntry 8 }

   	apLocation OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Location of the AP defined in Building.Floor.... mode.
            "
        ::= { wlsxSwitchAccessPointEntry 9 }

   	apTotalTime OBJECT-TYPE
         SYNTAX       TimeTicks
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Time since the Ap is connected to the switch 
            "
        ::= { wlsxSwitchAccessPointEntry 10 }

   	apInactiveTime OBJECT-TYPE
         SYNTAX       TimeTicks
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
            Time since the Ap has been inactive 
            "
        ::= { wlsxSwitchAccessPointEntry 11 }

   	apLoadBalancing OBJECT-TYPE
         SYNTAX       TruthValue
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates whether Load balancing is enabled or not.
            "
        ::= { wlsxSwitchAccessPointEntry 12 }

   	apChannelNoise OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates the noise on the channel
            "
        ::= { wlsxSwitchAccessPointEntry 13 }

   	apSignalToNoiseRatio OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			SNR for the BSSID.
            "
        ::= { wlsxSwitchAccessPointEntry 14 }

   	apTransmitRate OBJECT-TYPE
         SYNTAX       INTEGER{
		 				rate1Mbps(1),
						rate2Mbps(2),
						rate5point5Mbps(3),
						rate6Mbps(4),
						rate9Mbps(5),
						rate11Mbps(6),
						rate12Mbps(7),
						rate18Mbps(8),
						rate24Mbps(9),
						rate36Mbps(10),
						rate48Mbps(11),
						rate54Mbps(12)
		 			  }
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates Transmit rate of the channel
            "
        ::= { wlsxSwitchAccessPointEntry 15 }

   	apReceiveRate OBJECT-TYPE
         SYNTAX       INTEGER{
		 				rate1Mbps(1),
						rate2Mbps(2),
						rate5point5Mbps(3),
						rate6Mbps(4),
						rate9Mbps(5),
						rate11Mbps(6),
						rate12Mbps(7),
						rate18Mbps(8),
						rate24Mbps(9),
						rate36Mbps(10),
						rate48Mbps(11),
						rate54Mbps(12)
		 			  }
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates Receive rate of the channel
            "
        ::= { wlsxSwitchAccessPointEntry 16 }


 --Global AP Table
   wlsxSwitchGlobalAPTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF MxSwitchGlobalAPEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       deprecated 
      DESCRIPTION 
	  	"
			This Table lists all the Access Points Connected in the 
			Switch Domain. This table is valid only on a
			Master switch. On a Local switch, the table is empty.
		"
      ::= { wlsxAccessPointInfoGroup 4 } 

   wlsxSwitchGlobalAPEntry OBJECT-TYPE 
	  SYNTAX       MxSwitchGlobalAPEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       deprecated 
      DESCRIPTION 
             "Station Management Entry"
	  INDEX {globalAPLocation, globalAPAddress}
      ::= { wlsxSwitchGlobalAPTable 1 } 

   MxSwitchGlobalAPEntry ::=
     SEQUENCE {
         globalAPLocation		DisplayString,
		 globalAPAddress		IpAddress,
		 globalAPLocalSwitch	IpAddress,
		 globalAPdot11aPhyAddr	MacAddress,
		 globalAPdot11bPhyAddr	MacAddress,
		 globalAPState			INTEGER,
		 globalAPdot11gPhyAddr	MacAddress
   }

   	globalAPLocation OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   not-accessible
         STATUS       deprecated
         DESCRIPTION
            "
			Physical Location of the AP, defined in Building.Floor.Location
			format.
            "
        ::= { wlsxSwitchGlobalAPEntry 1 }

   	globalAPAddress OBJECT-TYPE
         SYNTAX       IpAddress
         MAX-ACCESS   not-accessible
         STATUS       deprecated
         DESCRIPTION
            "
			Address of the Access Point.
            "
        ::= { wlsxSwitchGlobalAPEntry 2 }

   	globalAPLocalSwitch OBJECT-TYPE
         SYNTAX       IpAddress
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			IP Address of the Local Switch this Access Point is connected to.
            "
        ::= { wlsxSwitchGlobalAPEntry 3 }

   	globalAPdot11aPhyAddr OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			Physical Mac address of the module supporting dot11a in the
			Access Point. AP can have support for both dot11a and dot11b 
			physical layer.
            "
        ::= { wlsxSwitchGlobalAPEntry 4 }

   	globalAPdot11bPhyAddr OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			Physical Mac address of the module supporting dot11b in the
			Access Point. AP can have support for both dot11a and dot11b 
			physical layer.
            "
        ::= { wlsxSwitchGlobalAPEntry 5 }

   	globalAPState OBJECT-TYPE
         SYNTAX       INTEGER(1..7)
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			State of the AP.
			1 -- AP is UP.
			2 -- AP is DOWN.
			3-7 -- Values are deprecated.
            "
        ::= { wlsxSwitchGlobalAPEntry 6 }

   	globalAPdot11gPhyAddr OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			Physical Mac address of the module supporting dot11g in the
			Access Point. AP can have support for both a,b,g 
			physical layer.
            "
        ::= { wlsxSwitchGlobalAPEntry 7 }

 -- Local AP Stats.

   wlsxSwitchAccessPointStatsTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF MxSwitchAccessPointStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This Table lists the statistics of all the Access Points Connected 
			to this switch. 
		"
      ::= { wlsxAccessPointInfoGroup 5 } 

   wlsxSwitchAccessPointStatsEntry OBJECT-TYPE 
	  SYNTAX       MxSwitchAccessPointStatsEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "
			 Ap Stats Entry.
			 "
	  INDEX {apBSSID}
      ::= { wlsxSwitchAccessPointStatsTable 1 } 

   MxSwitchAccessPointStatsEntry ::=
     SEQUENCE {
		 apStatsChannel						INTEGER,
		 apChannelBwRate					Integer32,
		 apChannelFrameRetryRate			Integer32,
		 apChannelFrameLowSpeedRate			Integer32,
		 apChannelFrameNonUnicastRate		Integer32,
		 apChannelFrameFragmentationRate	Integer32,
		 apChannelFrameReceiveErrorRate		Integer32,
		 apBSSTxPackets						Counter32,
		 apBSSTxBytes						Counter32,
		 apBSSRxPackets						Counter32,
		 apBSSRxBytes						Counter32,
		 apBSSBwRate						Integer32,
		 apBSSFrameRetryRate				Integer32,
		 apBSSFrameLowSpeedRate				Integer32,
		 apBSSFrameNonUnicastRate			Integer32,
		 apBSSFrameFragmentationRate		Integer32,
		 apBSSFrameReceiveErrorRate			Integer32
   }

   	apStatsChannel OBJECT-TYPE
         SYNTAX       INTEGER(1..165)
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Channel on which the ap is operating.
            "
        ::= { wlsxSwitchAccessPointStatsEntry 1 }


   	apChannelBwRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Bandwidth Rate in Kbps of the apChannel.
            "
        ::= {  wlsxSwitchAccessPointStatsEntry 2 }

   	apChannelFrameRetryRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Ap Channel Frame Retry Rate.
            "
        ::= { wlsxSwitchAccessPointStatsEntry 3 }

   	apChannelFrameLowSpeedRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Ap Channel Frame Low Speed Rate.
            "
        ::= { wlsxSwitchAccessPointStatsEntry 4 }

   	apChannelFrameNonUnicastRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Ap Channel Frame Non Unicast Packet Rate.
            "
        ::= {wlsxSwitchAccessPointStatsEntry 5 }

   	apChannelFrameFragmentationRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Ap Channel Frame Fragmentation Rate.
            "
        ::= { wlsxSwitchAccessPointStatsEntry  6 }

   	apChannelFrameReceiveErrorRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Ap Channel Frame Receive Error Rate.
            "
        ::= {  wlsxSwitchAccessPointStatsEntry 7 }

   	apBSSTxPackets OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Packets Transmitted by the ap on this BSSID.
            "
        ::= { wlsxSwitchAccessPointStatsEntry 8 }

   	apBSSTxBytes OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Bytes Transmitted by the ap on this BSSID.
			"
        ::= { wlsxSwitchAccessPointStatsEntry 9 }

   	apBSSRxPackets OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Packets Received by the ap on this BSSID
            "
        ::= { wlsxSwitchAccessPointStatsEntry  10 }

   	apBSSRxBytes OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Bytes Received by the ap on this BSSID.
            "
        ::= { wlsxSwitchAccessPointStatsEntry 11 }

   	apBSSBwRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Bandwidth Rate in Kbps of the ap on this BSSID.
            "
        ::= { wlsxSwitchAccessPointStatsEntry 12 }

   	apBSSFrameRetryRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Frame Retry Rate on this BSSID.
            "
        ::= { wlsxSwitchAccessPointStatsEntry 13 }

   	apBSSFrameLowSpeedRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Frame Low Speed Rate on this BSSID.
            "
        ::= { wlsxSwitchAccessPointStatsEntry 14 }

   	apBSSFrameNonUnicastRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Frame Non Unicast Packet Rate on this BSSID.
            "
        ::= { wlsxSwitchAccessPointStatsEntry 15 }

   	apBSSFrameFragmentationRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Frame Fragmentation Rate on this BSSID.
            "
        ::= { wlsxSwitchAccessPointStatsEntry 16 }

   	apBSSFrameReceiveErrorRate OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Frame Receive Error Rate on this BSSID.
            "
        ::= { wlsxSwitchAccessPointStatsEntry 17 }

-- New wlsxInstantAccessPointInfoGroup contains the information related to IAPs.
-- This table is valid only, when queried from the controller.

	wlsxIapTotalNumBranches  OBJECT-TYPE
		SYNTAX       Integer32
		MAX-ACCESS   read-only
		STATUS       current
		DESCRIPTION
			"Total number of branches in IAP"
		::= { wlsxInstantAccessPointInfoGroup 1 }

	wlsxIapTotalNumBranchesUp  OBJECT-TYPE
		SYNTAX       Integer32
		MAX-ACCESS   read-only
		STATUS       current
		DESCRIPTION
			"Total number of branches with status Up."
		::= { wlsxInstantAccessPointInfoGroup 2 }

	wlsxIapTotalNumBranchesDown  OBJECT-TYPE
		SYNTAX       Integer32
		MAX-ACCESS   read-only
		STATUS       current
		DESCRIPTION
			"Total number of branches with status Down"
		::= { wlsxInstantAccessPointInfoGroup 3 }

-- IAP Table

	wlsxIapBranchTable  OBJECT-TYPE
		SYNTAX       SEQUENCE OF IapBranchListEntry
		MAX-ACCESS   not-accessible
		STATUS       current
		DESCRIPTION
			"
				This table lists all the information related to IAP branches.
			"
		::= { wlsxInstantAccessPointInfoGroup 4 }
	wlsxIapBranchEntry OBJECT-TYPE
		SYNTAX       IapBranchListEntry
		MAX-ACCESS   not-accessible
		STATUS       current
		DESCRIPTION
			"IAP branch entry"
		INDEX {iapBranchKey}
		::= { wlsxIapBranchTable 1 }

	IapBranchListEntry ::=
		SEQUENCE {
			iapBranchKey                          DisplayString,
			iapBranchName                         DisplayString,
			iapBranchVcMacAddress                 MacAddress,
			iapBranchStatus                       INTEGER,
			iapBranchInnerIpAddressType           INTEGER,
			iapBranchInnerIpAddress               DisplayString,
			iapBranchAssignedSubnet               DisplayString,
			iapBranchAssignedVlan                 OCTET STRING
		}

	iapBranchKey OBJECT-TYPE
		SYNTAX       DisplayString(SIZE(65))
		MAX-ACCESS   read-only
		STATUS       current
		DESCRIPTION
			"Key of the IAP branch."
		::= { wlsxIapBranchEntry 1 }

	iapBranchName OBJECT-TYPE
		SYNTAX       DisplayString(SIZE(0..129))
		MAX-ACCESS   read-only
		STATUS       current
		DESCRIPTION
			" Name of the IAP branch."
		::= { wlsxIapBranchEntry 2 }

	iapBranchVcMacAddress OBJECT-TYPE
		SYNTAX       MacAddress
		MAX-ACCESS   not-accessible
		STATUS       current
		DESCRIPTION
			"MAC address of the Virtual Controller of the branch."
		::= { wlsxIapBranchEntry 3 }

	iapBranchStatus OBJECT-TYPE
		SYNTAX      INTEGER {
					up(1),
					down(2)
					}
		MAX-ACCESS   read-only
		STATUS       current
		DESCRIPTION
			"Current status of the branch"
		::= { wlsxIapBranchEntry 4 }

	iapBranchInnerIpAddressType OBJECT-TYPE
		SYNTAX      INTEGER {
					ipv4(1),
					ipv6(2)
					}
		MAX-ACCESS   read-only
		STATUS       current
		DESCRIPTION
			"Inner IP Address type IPv4 or IPv6 of the branch."
		::= { wlsxIapBranchEntry 5 }

	iapBranchInnerIpAddress OBJECT-TYPE
		SYNTAX       DisplayString(SIZE(0..45))
		MAX-ACCESS   read-only
		STATUS       current
		DESCRIPTION
			"Inner IPv4/IPv6 Address of the branch."
		::= { wlsxIapBranchEntry 6 }

	iapBranchAssignedSubnet OBJECT-TYPE
		SYNTAX       DisplayString
		MAX-ACCESS   read-only
		STATUS       current
		DESCRIPTION
			"Assigned subnets of the branch."
		::= { wlsxIapBranchEntry 7 }

	iapBranchAssignedVlan OBJECT-TYPE
		SYNTAX       OCTET STRING
		MAX-ACCESS   read-only
		STATUS       current
		DESCRIPTION
			"
				Assigned vlans of the branch.
				A string of octets containing one bit per VLAN for a
				total of 4096 VLANs in the management domain.
				The most significant bit of the octet string is the
				lowest value VLAN of 4096 VLANs.
				By setting the bit(1) we indicate that the vlan is part of the
				assigned vlans.
				The most significant bit of the bitmap is transmitted
				first. Note that if the length of this string is less than
				512 octets, any 'missing' octets are assumed to contain
				the value zero.
			"
		::= { wlsxIapBranchEntry 8 }

-- wlsxSwitchTraps
-- This group defines all the traps related to the switch platform. 
wlsxSwitchTrapObjectsGroup      OBJECT IDENTIFIER ::= { wlsxSwitchTraps 100 }

wlsxAuthServerName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
				This Object is used in the traps to indicate the 
				Authentication Server, used for Authentication.
            "
::= { wlsxSwitchTrapObjectsGroup 1 }


wlsxAuthServerTimeout OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
				This Object is used in the traps to indicate the 
				Authentication Server Timeout.
            "
::= { wlsxSwitchTrapObjectsGroup 2 }

wlsxFanNumber OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
				This Object is used in the traps to indicate 
				a failing fan number.
            "
::= { wlsxSwitchTrapObjectsGroup 4 }


wlsxLineCardNumber OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
				This Object is used in the traps to indicate a 
				Line Card in the switch.
            "
::= { wlsxSwitchTrapObjectsGroup 5 }


wlsxVoltageType OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
				This Object is used in the traps to indicate the 
				type of the voltage.
            "
::= { wlsxSwitchTrapObjectsGroup 6 }


wlsxVoltageValue OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..10))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
				This Object is used in the traps to indicate the 
				voltage value in Float.
            "
::= { wlsxSwitchTrapObjectsGroup 7 }


wlsxTemperatureValue OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
				This Object is used in the traps to indicate 
				Temperature Value.
            "
::= { wlsxSwitchTrapObjectsGroup 8 }


wlsxProcessName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
				This Object is used in the traps to indicate a 
				process name.
            "
::= { wlsxSwitchTrapObjectsGroup 9 }

wlsxStationMacAddress OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Physical Address of the Station.
            "
::= { wlsxSwitchTrapObjectsGroup 10 }

wlsxStationBlackListReason OBJECT-TYPE
         SYNTAX       INTEGER {
		 				userDefined(1),
						mitmAttack(2),
						authFailure(3),
						pingFlood(4),
						sessionFlood(5),
						synFlood(6),
						sessionBlacklist(7),
						ipSpoofing(8),
						other(100)
		 			  }
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Reason for which a station is black listed. 
            "
::= { wlsxSwitchTrapObjectsGroup 11 }

wlsxSpoofedIpAddress OBJECT-TYPE
         SYNTAX       IpAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This Object is used in a trap to identify a Spoofed IP Address.
            "
::= { wlsxSwitchTrapObjectsGroup 12 }

wlsxSpoofedOldPhyAddress OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This Object is used in a trap to identify a Old Mac Address.
            "
::= { wlsxSwitchTrapObjectsGroup 13 }

wlsxSpoofedNewPhyAddress OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This Object is used in a trap to identify a New Mac Address.
            "
::= { wlsxSwitchTrapObjectsGroup 14 }

wlsxDBName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This Object is used in a trap to identify name of the Database.
            "
::= { wlsxSwitchTrapObjectsGroup 15 }

wlsxDBUserName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This Object is used in a trap to identify name of the Database user.
            "
::= { wlsxSwitchTrapObjectsGroup 16 }

wlsxDBIpAddress OBJECT-TYPE
         SYNTAX       IpAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This Object is used in a trap to identify the IpAddress of the DB.
            "
::= { wlsxSwitchTrapObjectsGroup 17 }

wlsxDBType OBJECT-TYPE
         SYNTAX       INTEGER{
		 				mssql(1),
						mysql(2)
					  }
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This Object is used in a trap to identify the Port of the user.
            "
::= { wlsxSwitchTrapObjectsGroup 18 }

wlsxVrID OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This Object contains the Virtual Router Identifier.
            "
::= { wlsxSwitchTrapObjectsGroup 19 }

wlsxVrMasterIp OBJECT-TYPE
         SYNTAX       IpAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This Object contains the Master IP address.
            "
::= { wlsxSwitchTrapObjectsGroup 20 }

wlsxVrrpOperState OBJECT-TYPE
         SYNTAX       INTEGER {
						initialize(1),
						backup(2),
		 				master(3)
					  }

         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This Object represents the VRRP operational state.
            "
::= { wlsxSwitchTrapObjectsGroup 21 }

wlsxApTxPower OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
				This Object contains the value of the AP Transmit Power.
            "
::= { wlsxSwitchTrapObjectsGroup 22 }

wlsxESIServerGrpName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This Object represents the External Services Interface 
			(ESI) Server Group name
            "
::= { wlsxSwitchTrapObjectsGroup 23 }


wlsxESIServerName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This Object represents the External Services Interface
			(ESI) Server name
            "
::= { wlsxSwitchTrapObjectsGroup 24 }

wlsxESIServerIpaddress OBJECT-TYPE
         SYNTAX       IpAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This Object represents the External Services Interface 
			(ESI) Server 
			IP Address
            "
::= { wlsxSwitchTrapObjectsGroup 25 }

wlsxLicenseDaysRemaining OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This Object represents number of the days remaining prior
			to a license expiry
            "
::= { wlsxSwitchTrapObjectsGroup 26 }

wlsxSlotNumber OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
				This Object is used in the traps to indicate a 
				Line Card in the switch.  This value matches the value
				of sysExtCardSlot.
            "
::= { wlsxSwitchTrapObjectsGroup 27 }

wlsxStationBlackListReasonStr OBJECT-TYPE
        SYNTAX          DisplayString(SIZE(0..32))
        MAX-ACCESS      accessible-for-notify
        STATUS          current
        DESCRIPTION
                    "
            This object is used in the traps to indicate the
            type of Blacklist reason.
                                "
::= { wlsxSwitchTrapObjectsGroup 28 }

-- Trap Definitions.

wlsxSwitchIPChanged NOTIFICATION-TYPE        
	OBJECTS {wlsxSwitchIp}
    STATUS  current
    DESCRIPTION
			"A trap which indicates that the switch IP address has changed." 
    ::= { wlsxSwitchTraps 1001 }

wlsxSwitchRoleChange NOTIFICATION-TYPE        
	OBJECTS {wlsxSwitchRole}
    STATUS  current
    DESCRIPTION
			"A trap which indicates that the role of the switch has changed in 
			the Domain."
    ::= { wlsxSwitchTraps 1002 }

-- Authentication Traps.
wlsxUserEntryCreated NOTIFICATION-TYPE        
	OBJECTS {userPhyAddress}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that a New user is created.
			"
    ::= { wlsxSwitchTraps 1003 }

wlsxUserEntryDeleted NOTIFICATION-TYPE        
	OBJECTS {userPhyAddress}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that a user is deleted.
			"
    ::= { wlsxSwitchTraps 1004 }


wlsxUserEntryAuthenticated NOTIFICATION-TYPE        
	OBJECTS {userPhyAddress, userName, userAuthenticationMethod, userRole}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that a user is Authenticated.
			"
    ::= { wlsxSwitchTraps 1005 }


wlsxUserEntryDeAuthenticated NOTIFICATION-TYPE        
	OBJECTS {userPhyAddress}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that a user is Deauthenticated.
			"
    ::= { wlsxSwitchTraps 1006 }


wlsxUserAuthenticationFailed NOTIFICATION-TYPE        
	OBJECTS {userPhyAddress}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that a user authentication has failed.
			"
    ::= { wlsxSwitchTraps 1007 }


wlsxAuthServerReqTimedOut NOTIFICATION-TYPE        
	OBJECTS {wlsxAuthServerName}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that the authentication server request 
			timed out.
			"
    ::= { wlsxSwitchTraps 1008 }

wlsxAuthServerTimedOut NOTIFICATION-TYPE        
	OBJECTS {wlsxAuthServerName, wlsxAuthServerTimeout}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that the authentication server 
			timed out.
			"
    ::= { wlsxSwitchTraps 1009 }

wlsxAuthServerIsUp NOTIFICATION-TYPE        
	OBJECTS {wlsxAuthServerName}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that the authentication server is up.
			"
    ::= { wlsxSwitchTraps 1010 }

wlsxAuthMaxUserEntries NOTIFICATION-TYPE        
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that the User Entries table is full and
			cannot add any more entries.
			"
    ::= { wlsxSwitchTraps 1011 }

wlsxAuthMaxAclEntries NOTIFICATION-TYPE        
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that the Acl Entries table is full and
			cannot add any more entries.
			"
    ::= { wlsxSwitchTraps 1012 }

wlsxAuthMaxBWContracts NOTIFICATION-TYPE        
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that the switch reached the maximum number of
			configurable Bandwidth contracts.
			"
    ::= { wlsxSwitchTraps 1013 }

-- Platform Traps.

wlsxPowerSupplyFailure NOTIFICATION-TYPE        
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that the power supply has failed.
			"
    ::= { wlsxSwitchTraps 1014 }

wlsxFanFailure NOTIFICATION-TYPE        
	OBJECTS {wlsxFanNumber}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that the fan has failed.
			"
    ::= { wlsxSwitchTraps 1015 }

wlsxOutOfRangeVoltage NOTIFICATION-TYPE        
	OBJECTS {wlsxVoltageType, wlsxVoltageValue}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that the switch received out of range 
			voltage.
			"
    ::= { wlsxSwitchTraps 1016 }

wlsxOutOfRangeTemperature NOTIFICATION-TYPE        
	OBJECTS {wlsxTemperatureValue}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that the Temperature is out of bounds.
			"
    ::= { wlsxSwitchTraps 1017 }


wlsxLCInserted NOTIFICATION-TYPE        
	OBJECTS {wlsxLineCardNumber, wlsxSlotNumber}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that a Line card is inserted.
			"
    ::= { wlsxSwitchTraps 1018 }

wlsxSCInserted NOTIFICATION-TYPE        
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that a supervisory card is inserted.
			"
    ::= { wlsxSwitchTraps 1019 }

wlsxGBICInserted NOTIFICATION-TYPE        
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that a GBIC is inserted in a line card. 
			"
    ::= { wlsxSwitchTraps 1020 }

wlsxProcessDied NOTIFICATION-TYPE        
	OBJECTS {wlsxProcessName}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that a process has died.
			"
    ::= { wlsxSwitchTraps 1021 }

wlsxProcessExceedsMemoryLimits NOTIFICATION-TYPE        
	OBJECTS {wlsxProcessName}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that a process is consuming large
			amounts of memory.
			"
    ::= { wlsxSwitchTraps 1022 }

wlsxLowOnFlashSpace NOTIFICATION-TYPE        
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that the switch is running low on flash space.
			"
    ::= { wlsxSwitchTraps 1023 }

wlsxLowMemory NOTIFICATION-TYPE        
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that the system free memory is low.
			"
    ::= { wlsxSwitchTraps 1024 }

wlsxFanTrayRemoved NOTIFICATION-TYPE        
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that the fan tray is removed.
			"
    ::= { wlsxSwitchTraps 1025 }

wlsxFanTrayInserted NOTIFICATION-TYPE        
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that the fan tray is removed.
			"
    ::= { wlsxSwitchTraps 1026 }

wlsxLCRemoved NOTIFICATION-TYPE        
	OBJECTS {wlsxLineCardNumber, wlsxSlotNumber}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that a Line card is removed.
			"
    ::= { wlsxSwitchTraps 1027 }

wlsxSCRemoved NOTIFICATION-TYPE        
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that a supervisory card is removed.
			"
    ::= { wlsxSwitchTraps 1028 }

wlsxPowerSupplyMissing NOTIFICATION-TYPE        
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that the power supply is missing.
			"
    ::= { wlsxSwitchTraps 1029 }

-- Access point up/down traps.

wlsxAccessPointIsUp NOTIFICATION-TYPE        
	OBJECTS {apLocation, apIpAddress}
    STATUS  deprecated
    DESCRIPTION
			"
			A trap which indicates that an Access point at Location 
			apLocation and Address apIpAddress is up.
			"
    ::= { wlsxSwitchTraps 1030 }

wlsxAccessPointIsDown NOTIFICATION-TYPE        
	OBJECTS {apLocation, apIpAddress}
    STATUS  deprecated
    DESCRIPTION
			"
			A trap which indicates that an Access point at Location 
			apLocation and Address apIpAddress is down.
			"
    ::= { wlsxSwitchTraps 1031}


wlsxCoverageHoleDetected NOTIFICATION-TYPE        
	OBJECTS {apLocation, apIpAddress, wlsxStationMacAddress}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that an Access point at Location
			apLocation and Address apIpAddress has detected a Coverage Hole.
			"
    ::= { wlsxSwitchTraps 1032}


wlsxChannelChanged NOTIFICATION-TYPE        
	OBJECTS {apLocation, apIpAddress, apCurrentChannel}
    STATUS  deprecated
    DESCRIPTION
			"
			A trap which indicates that an Access point at Location 
			apLocation and Address apIpAddress has changed the channel to 
			apCurrentChannel.
			"
    ::= { wlsxSwitchTraps 1033}

wlsxStationAddedToBlackList NOTIFICATION-TYPE        
	OBJECTS {wlsxStationMacAddress, wlsxStationBlackListReason, wlsxStationBlackListReasonStr}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that a station with address
			wlsxStationMacAddress is black listed for 
			wlsxStationBlackListReason reason.
			"
    ::= { wlsxSwitchTraps 1034}

wlsxStationRemovedFromBlackList NOTIFICATION-TYPE        
	OBJECTS {wlsxStationMacAddress}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that a station with address
			wlsxStationMacAddress is removed from black list.
			"
    ::= { wlsxSwitchTraps 1035}

wlsxIpSpoofingDetected NOTIFICATION-TYPE        
	OBJECTS {wlsxSpoofedIpAddress, wlsxSpoofedOldPhyAddress, wlsxSpoofedNewPhyAddress}
    STATUS  current
    DESCRIPTION
			"
			A trap indicating that the switch detected IP Spoofing.
			"
    ::= { wlsxSwitchTraps 1036}

wlsxDBCommunicationFailure NOTIFICATION-TYPE        
	OBJECTS {wlsxDBName, wlsxDBUserName, wlsxDBIpAddress, wlsxDBType}
    STATUS  current
    DESCRIPTION
			"
			A trap to indicate that communication with Database failed.
			"
    ::= { wlsxSwitchTraps 1037}

wlsxVrrpStateChange NOTIFICATION-TYPE        
	OBJECTS {wlsxVrID, wlsxVrMasterIp, wlsxVrrpOperState}
    STATUS  current
    DESCRIPTION
			"
				A trap which indicates that VRRP State has changed on the switch.
			"
    ::= { wlsxSwitchTraps 1038}

wlsxAPRadioAttributesChanged NOTIFICATION-TYPE        
	OBJECTS {apLocation, apIpAddress, apCurrentChannel, wlsxApTxPower}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates changes in the Radio attributes of an 
			Access Point at location apLocation and address apIpAddress.
			Ap channel is apCurrentChannel, and Transmit power is 
			apTxPower.
			"
    ::= { wlsxSwitchTraps 1039}

wlsxESIServerUp NOTIFICATION-TYPE        
	OBJECTS {wlsxESIServerGrpName, wlsxESIServerName, wlsxESIServerIpaddress}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that a ESI server <wlsxESIServerName> in 
			group <wlsxESIServerGrpName> with <wlsxESIServerIpaddress> is up
			"
    ::= { wlsxSwitchTraps 1040}

wlsxESIServerDown NOTIFICATION-TYPE        
	OBJECTS {wlsxESIServerGrpName, wlsxESIServerName, wlsxESIServerIpaddress}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that a ESI server <wlsxESIServerName> in 
			group <wlsxESIServerGrpName> with <wlsxESIServerIpaddress> is down
			"
    ::= { wlsxSwitchTraps 1041}

wlsxLicenseExpiry NOTIFICATION-TYPE        
	OBJECTS {wlsxLicenseDaysRemaining}
    STATUS  current
    DESCRIPTION
			"
			A trap which indicates that one or more licenses on the
			switch will expire in <wlsxLicenseDaysRemaining> days
			"
    ::= { wlsxSwitchTraps 1042}

wlsxAceUsageThreshold NOTIFICATION-TYPE
    STATUS  current
    DESCRIPTION
                       "
                       A trap which indicates that the Acl Entries table has reached
                       eighty percent of the maximum limit.
                       "
    ::= { wlsxSwitchTraps 1043 }

wlsxFanAbsent NOTIFICATION-TYPE
       OBJECTS {wlsxFanNumber}
    STATUS  current
    DESCRIPTION
                       "
                       A trap which indicates that the fan is absent.
                       "
    ::= { wlsxSwitchTraps 1044 }

wlsxWebCCLicenseEnforcement NOTIFICATION-TYPE
    STATUS  current
    DESCRIPTION
                       "
                       A trap which indicates that the WebCC license enforcement has
                       been triggered.
                       "
    ::= { wlsxSwitchTraps 1045 }

wlsxLowOnFlash1Space NOTIFICATION-TYPE
   STATUS  current
   DESCRIPTION
                     "
                     A trap which indicates that the switch is running low on flash1 space.
                     "
   ::= { wlsxSwitchTraps 1046 }

wlsxSwitchIPv6Changed NOTIFICATION-TYPE
        OBJECTS {wlsxSwitchIpv6}
    STATUS  current
    DESCRIPTION
                        "A trap which indicates that the switch IPv6 address has changed."
    ::= { wlsxSwitchTraps 1047 }

wlsxDot1xThresholdLimitHit NOTIFICATION-TYPE
    STATUS  current
    DESCRIPTION
                        "A Trap which indicates that the controller is running on high optimum limit."
    ::= { wlsxSwitchTraps 1048 }

wlsxDot1xTotalLimitHit NOTIFICATION-TYPE
    STATUS  current
    DESCRIPTION
                        " A Trap which indicates that the controller is running on full optimum limit."
    ::= { wlsxSwitchTraps 1049 }


END