--- ArubaOS 8.8.0.1_80393
-- vim:set ts=4 sw=4:
WLSX-SYSTEMEXT-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       TEXTUAL-CONVENTION FROM SNMPv2-TC 
       
       MODULE-IDENTITY,
       OBJECT-TYPE,
       snmpModules,
       Integer32,
	   Counter32,
	   IpAddress,
	   TimeTicks,
	   NOTIFICATION-TYPE
           FROM SNMPv2-SMI

       TDomain,
       DisplayString,
       PhysAddress,
       TAddress,
       TimeInterval,
       RowStatus,
       StorageType,
       TestAndIncr,
	   MacAddress,
	   TruthValue
           FROM SNMPv2-TC

	   ArubaSwitchRole,
       ArubaActiveState,
       ArubaCardType
	   		FROM ARUBA-TC

       OBJECT-GROUP
           FROM SNMPv2-CONF
	wlsxEnterpriseMibModules
           FROM ARUBA-MIB;

   wlsxSystemExtMIB MODULE-IDENTITY 
       LAST-UPDATED "202008141745Z"
       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
       CONTACT-INFO
            "Postal:    3333 Scott Blvd,
                        Santa Clara, CA 95054
            E-mail:     aruba-ext-eng-reg@hpe.com
            Phone:      408 227 4500
            Fax:        408 752 0626"
       DESCRIPTION
           "This MIB module defines MIB objects which provide
            System level information about the Aruba controller."
       REVISION        "202008141745Z"
       DESCRIPTION
           "The initial revision."
       ::= { wlsxEnterpriseMibModules 2 }

   wlsxSystemExtGroup       OBJECT IDENTIFIER ::= { wlsxSystemExtMIB 1 }
   wlsxSystemExtTableGenNumberGroup OBJECT IDENTIFIER ::= { wlsxSystemExtMIB 2 }

   -- wlsxSystemExtGroup contains objects to describe a controller.

   wlsxSysExtSwitchIp OBJECT-TYPE
        SYNTAX       IpAddress
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"Controller IP as configured by the user. This IP address uniquely 
			identifies the controller."
        ::= { wlsxSystemExtGroup 1 }

   wlsxSysExtHostname OBJECT-TYPE
        SYNTAX       DisplayString (SIZE(1..32))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"Name of the controller."
        ::= { wlsxSystemExtGroup 2 }

   wlsxSysExtModelName OBJECT-TYPE
        SYNTAX       DisplayString (SIZE(1..32))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"Model Name of the controller."
        ::= { wlsxSystemExtGroup 3 }

   wlsxSysExtSwitchRole OBJECT-TYPE
        SYNTAX      ArubaSwitchRole
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"Role of this controller in the Aruba Domain."
        ::= { wlsxSystemExtGroup 4 }

   wlsxSysExtSwitchMasterIp OBJECT-TYPE
        SYNTAX       IpAddress
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"
			 Switch IP of the master controller.
			"
        ::= { wlsxSystemExtGroup 5 }

   wlsxSysExtSwitchDate OBJECT-TYPE
        SYNTAX       DisplayString(SIZE(0..64))
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
			"
			System notion of the local date and time of day.
			"
        ::= { wlsxSystemExtGroup 6 }

   wlsxSysExtSwitchBaseMacaddress OBJECT-TYPE
        SYNTAX       MacAddress
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"
			The Base MAC address of the controller.
			"
        ::= { wlsxSystemExtGroup 7 }

   wlsxSysExtFanTrayAssemblyNumber OBJECT-TYPE
        SYNTAX       DisplayString(SIZE(0..64))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"
			Assembly number of the Fan tray.
			"
        ::= { wlsxSystemExtGroup 8 }

   wlsxSysExtFanTraySerialNumber OBJECT-TYPE
        SYNTAX       DisplayString(SIZE(0..64))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"
			Serial number of the Fan tray
			"
        ::= { wlsxSystemExtGroup 9 }

   wlsxSysExtInternalTemparature OBJECT-TYPE
        SYNTAX       DisplayString(SIZE(0..64))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"
			Internal temperature in the controller.
			"
        ::= { wlsxSystemExtGroup 10 }

   wlsxSysExtLicenseSerialNumber OBJECT-TYPE
        SYNTAX       DisplayString(SIZE(0..64))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"
			The license serial number of the controller.
			"
        ::= { wlsxSystemExtGroup 11 }
         
   wlsxSysExtSwitchLicenseCount OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"
			 The number of licenses installed on the controller
			"
        ::= { wlsxSystemExtGroup 12 }

 -- Table lists all the processors and their corresponding Load.

   wlsxSysExtProcessorTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxSysExtProcessorEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			The table of processors contained by the controller.
		"
	
      ::= { wlsxSystemExtGroup 13 } 

   wlsxSysExtProcessorEntry OBJECT-TYPE 
	  SYNTAX       WlsxSysExtProcessorEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  "
	  	An entry for one processor contained by the controller.
	  "
	  INDEX { sysExtProcessorID}
      ::= { wlsxSysExtProcessorTable 1 } 

   WlsxSysExtProcessorEntry ::=
     SEQUENCE {
         sysExtProcessorID		Integer32,
         sysExtProcessorDescr 	DisplayString,
		 sysExtProcessorLoad	Integer32
     }

   sysExtProcessorID OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			Processor Index.
            "
        ::= { wlsxSysExtProcessorEntry 1 }

   sysExtProcessorDescr OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..64))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "
			Description of the processor.
            "
        ::= { wlsxSysExtProcessorEntry 2 }

   sysExtProcessorLoad OBJECT-TYPE
        SYNTAX       Integer32 (0..100)
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"
			The average, over the last minute, of the percentage of
			time that this processor was not idle.
			"
        ::= { wlsxSysExtProcessorEntry 3 }

   -- Table contains all the storage devices in the controller and their
   -- utilization numbers.

   wlsxSysExtStorageTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxSysExtStorageEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
		"
		The table of Storage-devices contained by the controller.
		"
	
      ::= { wlsxSystemExtGroup 14 } 

   wlsxSysExtStorageEntry OBJECT-TYPE 
	  SYNTAX       WlsxSysExtStorageEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "
			 	An entry for one long-term storage device contained by the 
				controller.
			 "
	  INDEX { sysExtStorageIndex }
      ::= { wlsxSysExtStorageTable 1 } 

   WlsxSysExtStorageEntry ::=
     SEQUENCE {
         sysExtStorageIndex		Integer32,
         sysExtStorageType 		INTEGER,
		 sysExtStorageSize		Integer32,
		 sysExtStorageUsed		Integer32,
		 sysExtStorageName		DisplayString
   }

   sysExtStorageIndex OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			Index into the table.
            "
        ::= { wlsxSysExtStorageEntry 1 }

   sysExtStorageType OBJECT-TYPE
        SYNTAX      INTEGER {
						ram(1),
						flashMemory(2)
					}

         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Type of the storage.
            "
        ::= { wlsxSysExtStorageEntry 2 }

   sysExtStorageSize OBJECT-TYPE
        SYNTAX      Integer32

         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total size of the storage filesystem in MB.
            "
        ::= { wlsxSysExtStorageEntry 3 }

   sysExtStorageUsed OBJECT-TYPE
        SYNTAX      Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Used Storage in MB.
            "
        ::= { wlsxSysExtStorageEntry 4 }

   sysExtStorageName OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Name of the storage filesystem.
            "
        ::= { wlsxSysExtStorageEntry 5 }

-- This table describes the memory utilization of the controller

   wlsxSysExtMemoryTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxSysExtMemoryEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
		"
		The memory status of the controller
		"
	
      ::= { wlsxSystemExtGroup 15 } 

   wlsxSysExtMemoryEntry OBJECT-TYPE 
	  SYNTAX       WlsxSysExtMemoryEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "
		An entry for one memory region on the controller.  Currently,
		only the control processor memory is monitored.
	     "
	  INDEX { sysExtMemoryIndex }
      ::= { wlsxSysExtMemoryTable 1 } 

   WlsxSysExtMemoryEntry ::=
     SEQUENCE {
     sysExtMemoryIndex	Integer32,
	 sysExtMemorySize	Integer32,
	 sysExtMemoryUsed	Integer32,
	 sysExtMemoryFree	Integer32
   }

   sysExtMemoryIndex OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			Index into the table.
            "
        ::= { wlsxSysExtMemoryEntry 1 }

   sysExtMemorySize OBJECT-TYPE
        SYNTAX      Integer32

         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
	    		Total memory in KB.
            "
        ::= { wlsxSysExtMemoryEntry 2 }

   sysExtMemoryUsed OBJECT-TYPE
        SYNTAX      Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
	    		Used memory in KB.
            "
        ::= { wlsxSysExtMemoryEntry 3 }

   sysExtMemoryFree OBJECT-TYPE
        SYNTAX      Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
	    		Free memory in KB.
            "
        ::= { wlsxSysExtMemoryEntry 4 }

-- This table lists the different Hardware Modules in the controller.

   wlsxSysExtCardTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxSysExtCardEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
		"
		The table of Hardware modules in the controller.
		"
	
      ::= { wlsxSystemExtGroup 16 } 

   wlsxSysExtCardEntry OBJECT-TYPE 
	  SYNTAX       WlsxSysExtCardEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "
			 	An entry for one Hardware Module in the controller.
			 "
	  INDEX { sysExtCardSlot }
      ::= { wlsxSysExtCardTable 1 } 

   WlsxSysExtCardEntry ::=
     SEQUENCE {
		 sysExtCardSlot						Integer32,
         sysExtCardType 					ArubaCardType,
		 sysExtCardNumOfPorts				Integer32,
		 sysExtCardNumOfFastethernetPorts	Integer32,
		 sysExtCardNumOfGigPorts			Integer32,
		 sysExtCardSerialNo					DisplayString,
		 sysExtCardAssemblyNo				DisplayString,
		 sysExtCardManufacturingDate		DisplayString,
		 sysExtCardHwRevision				DisplayString,
		 sysExtCardFpgaRevision				DisplayString,
		 sysExtCardSwitchChip				DisplayString,
		 sysExtCardStatus					ArubaActiveState,
		 sysExtCardUserSlot					Integer32,
		 sysExtCardServiceTag				DisplayString,
		 sysExtCardPartNumber				DisplayString
   }

   sysExtCardSlot OBJECT-TYPE
         SYNTAX      Integer32
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			Slot in which this card is located, offset by one.  For the user-visible
			slot number see sysExtCardUserSlot
            "
        ::= { wlsxSysExtCardEntry 1 }

   sysExtCardType OBJECT-TYPE
         SYNTAX      ArubaCardType
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Type of the Card.
            "
        ::= { wlsxSysExtCardEntry 2 }

   sysExtCardNumOfPorts OBJECT-TYPE
         SYNTAX      Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
		    Number of data ports on the card.	
            "
        ::= { wlsxSysExtCardEntry 3 }

   sysExtCardNumOfFastethernetPorts OBJECT-TYPE
        SYNTAX      Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Number of Fastethernet ports on the card.
            "
        ::= { wlsxSysExtCardEntry 4 }

   sysExtCardNumOfGigPorts OBJECT-TYPE
        SYNTAX      Integer32

         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Number of Gigabit ethernet ports on the card.
            "
        ::= { wlsxSysExtCardEntry 5 }

   sysExtCardSerialNo OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Serial number of the card.
            "
        ::= { wlsxSysExtCardEntry 6 }

   sysExtCardAssemblyNo OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Assembly Number of the card.
            "
        ::= { wlsxSysExtCardEntry 7 }

   sysExtCardManufacturingDate OBJECT-TYPE
        SYNTAX      DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Card manufacturing date.
            "
        ::= { wlsxSysExtCardEntry 8 }

   sysExtCardHwRevision OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..64))

         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Hardware revision of the card.
            "
        ::= { wlsxSysExtCardEntry 9 }

   sysExtCardFpgaRevision OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..64))

         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Fpga revision number.
            "
        ::= { wlsxSysExtCardEntry 10 }

   sysExtCardSwitchChip OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..64))

         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Switching Chip version.
            "
        ::= { wlsxSysExtCardEntry 11 }

   sysExtCardStatus OBJECT-TYPE
        SYNTAX      ArubaActiveState

         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Status of the card.
            "
        ::= { wlsxSysExtCardEntry 12 }

   sysExtCardUserSlot OBJECT-TYPE
        SYNTAX      Integer32

         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			User-visible (zero-based) slot number.
            "
        ::= { wlsxSysExtCardEntry 13 }

   sysExtCardServiceTag OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Service Tag of the card.
            "
        ::= { wlsxSysExtCardEntry 14 }

   sysExtCardPartNumber OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Service Tag of the card.
            "
        ::= { wlsxSysExtCardEntry 15 }

-- This table lists the Fans in the controller.

   wlsxSysExtFanTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxSysExtFanEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
		"
		The table of all supported fans in the controller. Not supported in Aruba 200/800 and 2400 controllers.
		"
	
      ::= { wlsxSystemExtGroup 17 } 

   wlsxSysExtFanEntry OBJECT-TYPE 
	  SYNTAX       WlsxSysExtFanEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "
			 	An entry for one fan.
			 "
	  INDEX { sysExtFanIndex }
      ::= { wlsxSysExtFanTable 1 } 

   WlsxSysExtFanEntry ::=
     SEQUENCE {
         sysExtFanIndex			Integer32,
		 sysExtFanStatus		ArubaActiveState
   }

   sysExtFanIndex OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			Index into the table.
            "
        ::= { wlsxSysExtFanEntry 1 }

   sysExtFanStatus OBJECT-TYPE
         SYNTAX      ArubaActiveState
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Status of the Fan.
            "
        ::= { wlsxSysExtFanEntry 2 }

-- This table lists the Power supplies in the controller.

   wlsxSysExtPowerSupplyTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxSysExtPowerSupplyEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
		"
		The table of all supported Power supplies in the controller. Not supported in Aruba 200, 800 and 2400 controllers.
		"
	
      ::= { wlsxSystemExtGroup 18 } 

   wlsxSysExtPowerSupplyEntry OBJECT-TYPE 
	  SYNTAX       WlsxSysExtPowerSupplyEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "
			 An entry for one power supply.
			 "
	  INDEX { sysExtPowerSupplyIndex }
      ::= { wlsxSysExtPowerSupplyTable 1 } 

   WlsxSysExtPowerSupplyEntry ::=
     SEQUENCE {
         sysExtPowerSupplyIndex			Integer32,
		 sysExtPowerSupplyStatus		ArubaActiveState
   }

   sysExtPowerSupplyIndex OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			Index into the table.
            "
        ::= { wlsxSysExtPowerSupplyEntry 1 }

   sysExtPowerSupplyStatus OBJECT-TYPE
         SYNTAX      ArubaActiveState
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Status of the power supply.
            "
        ::= { wlsxSysExtPowerSupplyEntry 2 }

-- Switch List Table contains all the controllers in the domain. This table is 
-- valid only, when queried from the master controller.

   wlsxSysExtSwitchListTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxSysExtSwitchListEntry 
	  MAX-ACCESS   not-accessible		
      STATUS      current 
      DESCRIPTION 
	  	"This Table will list all the controllers in the Aruba Domain.
		 It will be populated only on the master controller. Local controllers
		 return empty table.
		"
	
      ::= { wlsxSystemExtGroup 19 } 

     wlsxSysExtSwitchListEntry OBJECT-TYPE 
	  SYNTAX       WlsxSysExtSwitchListEntry 
	  MAX-ACCESS   not-accessible		
      STATUS      current 
      DESCRIPTION 
             "Switch List Entry"
	  INDEX { sysExtSwitchIPAddress}
      ::= { wlsxSysExtSwitchListTable 1 } 

     WlsxSysExtSwitchListEntry ::=
     SEQUENCE {
         sysExtSwitchIPAddress	IpAddress,
         sysExtSwitchRole 		ArubaSwitchRole,
		 sysExtSwitchLocation	DisplayString,
		 sysExtSwitchSWVersion	DisplayString,
		 sysExtSwitchStatus		ArubaActiveState,
		 sysExtSwitchName		DisplayString,
		 sysExtSwitchSerNo      DisplayString
     }

     sysExtSwitchIPAddress OBJECT-TYPE
         SYNTAX       IpAddress
         MAX-ACCESS   not-accessible
         STATUS       current 
         DESCRIPTION
            "
			IP Address of the controller.
            "
        ::= { wlsxSysExtSwitchListEntry 1 }

     sysExtSwitchRole OBJECT-TYPE
        SYNTAX      ArubaSwitchRole
         MAX-ACCESS   read-only
         STATUS       current 
         DESCRIPTION
            "
			 Role of the controller.
            "
        ::= { wlsxSysExtSwitchListEntry 2 }

     sysExtSwitchLocation OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS      current 
         DESCRIPTION
            "
			Location of the controller
            "
        ::= { wlsxSysExtSwitchListEntry 3 }

     sysExtSwitchSWVersion OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS     current 
         DESCRIPTION
            "
			Software version the controller is running.
            "
        ::= { wlsxSysExtSwitchListEntry 4 }

     sysExtSwitchStatus OBJECT-TYPE
        SYNTAX      ArubaActiveState
         MAX-ACCESS   read-only
         STATUS      current 
         DESCRIPTION
            "
			Status of the controller.
            "
        ::= { wlsxSysExtSwitchListEntry 5 }

     sysExtSwitchName OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..128))
         MAX-ACCESS   read-only
         STATUS      current 
         DESCRIPTION
            "
			Host name of the controller.
            "
        ::= { wlsxSysExtSwitchListEntry 6 }

     sysExtSwitchSerNo OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS      current 
         DESCRIPTION
            "
			Serial number of the controller.
            "
        ::= { wlsxSysExtSwitchListEntry 7 }

-- The license table lists all valid licenses installed on the controller

   wlsxSysExtSwitchLicenseTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxSysExtLicenseEntry
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"This table lists all licenses installed on the controller.
		"
	
      ::= { wlsxSystemExtGroup 20 } 

     wlsxSysExtLicenseEntry OBJECT-TYPE 
	 	SYNTAX      WlsxSysExtLicenseEntry
	 	MAX-ACCESS   not-accessible		
     	STATUS       current 
     	DESCRIPTION 
             "License Entry"
	  	INDEX { sysExtLicenseIndex }
      ::= { wlsxSysExtSwitchLicenseTable 1 } 

     WlsxSysExtLicenseEntry ::=
     SEQUENCE {
     	 sysExtLicenseIndex         Integer32,
         sysExtLicenseKey			DisplayString,
         sysExtLicenseInstalled		DisplayString,
         sysExtLicenseExpires		DisplayString,
         sysExtLicenseFlags			DisplayString,
         sysExtLicenseService 		DisplayString
     }

     sysExtLicenseIndex OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			License ID number
            "
        ::= { wlsxSysExtLicenseEntry 1 }

     sysExtLicenseKey OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			License Key
            "
        ::= { wlsxSysExtLicenseEntry 2 }

     sysExtLicenseInstalled OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			License installation time
            "
        ::= { wlsxSysExtLicenseEntry 3 }

     sysExtLicenseExpires OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			License expiry time
            "
        ::= { wlsxSysExtLicenseEntry 4 }

     sysExtLicenseFlags OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			License flags; E - enabled; A - auto-generated;
			               R - reboot required to activate
            "
        ::= { wlsxSysExtLicenseEntry 5 }

     sysExtLicenseService OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The service enabled by this license.
            "
        ::= { wlsxSysExtLicenseEntry 6 }

   wlsxSysExtMMSCompatLevel OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"
			 Lists the compatibility level of this controller with the MMS
			"
        ::= { wlsxSystemExtGroup 21 }

   wlsxSysExtMMSConfigID OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"
			 This Object represents the value of the MMS Configuration ID in the controller.
			"
        ::= { wlsxSystemExtGroup 22 }

   wlsxSysExtControllerConfigID OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"
			 This Object represents the value of the Controller's Configuration ID.
			"
        ::= { wlsxSystemExtGroup 23 }

   wlsxSysExtIsMMSConfigUpdateEnabled OBJECT-TYPE
        SYNTAX       TruthValue
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
			"
			This objects indicates whether the controller is configured to accept configuration snapshots from MMS.
			"
        ::= { wlsxSystemExtGroup 24 }

   wlsxSysExtSwitchLastReload OBJECT-TYPE
        SYNTAX       DisplayString(SIZE(0..128))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"
			 The reason for the last controller reload
			"
        ::= { wlsxSystemExtGroup 25 }

   wlsxSysExtLastStatsReset OBJECT-TYPE
        SYNTAX       TimeTicks
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
			"
			 Last time switch stats was reset
			"
        ::= { wlsxSystemExtGroup 26 }

   wlsxSysExtHwVersion OBJECT-TYPE
        SYNTAX       DisplayString (SIZE(1..64))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
                        "Hardware version of the switch."
        ::= { wlsxSystemExtGroup 27 }

   wlsxSysExtSwVersion OBJECT-TYPE
        SYNTAX       DisplayString (SIZE(1..64))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
                        "Software version of the switch."
        ::= { wlsxSystemExtGroup 28 }

   wlsxSysExtSerialNumber OBJECT-TYPE
        SYNTAX       DisplayString (SIZE(1..64))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
                        "The serial number of the switch."
        ::= { wlsxSystemExtGroup 29 }

   wlsxSysExtCpuUsedPercent OBJECT-TYPE
        SYNTAX       Gauge32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
                        "The CPU used percent of the switch"
        ::= { wlsxSystemExtGroup 30 }

   wlsxSysExtMemoryUsedPercent OBJECT-TYPE
        SYNTAX       Gauge32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
                        "The memory used percent of the switch"
        ::= { wlsxSystemExtGroup 31 }

   wlsxSysExtPacketLossPercent OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
                        "The packet loss count of the switch"
        ::= { wlsxSystemExtGroup 32 }


   wlsxSysExtUserTableGenNumber OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       deprecated
        DESCRIPTION
			"
			This objects denotes the number of times the user table was 
			modified since reboot.
			"
        ::= { wlsxSystemExtTableGenNumberGroup 1 }

   wlsxSysExtAPBssidTableGenNumber OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       deprecated
        DESCRIPTION
			"
			This objects denotes the number of times the AP BSSID table was 
			modified since reboot.
			"
        ::= { wlsxSystemExtTableGenNumberGroup 2 }


   wlsxSysExtAPRadioTableGenNumber OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       deprecated
        DESCRIPTION
			"
			This objects denotes the number of times the Radio table was 
			modified since reboot.
			"
        ::= { wlsxSystemExtTableGenNumberGroup 3 }


   wlsxSysExtAPTableGenNumber OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       deprecated 
        DESCRIPTION
			"
			This objects denotes the number of times the AP table was 
			modified since reboot.
			"
        ::= { wlsxSystemExtTableGenNumberGroup 4 }


   wlsxSysExtSwitchListTableGenNumber OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       deprecated 
        DESCRIPTION
			"
			This objects denotes the number of times the Switch list table was 
			modified since reboot.
			"
        ::= { wlsxSystemExtTableGenNumberGroup 5 }


   wlsxSysExtPortTableGenNumber OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       deprecated
        DESCRIPTION
			"
			This objects denotes the number of times the port table was 
			modified since reboot.
			"
        ::= { wlsxSystemExtTableGenNumberGroup 6 }


   wlsxSysExtVlanTableGenNumber OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       deprecated 
        DESCRIPTION
			"
			This objects denotes the number of times the Vlan table was 
			modified since reboot.
			"
        ::= { wlsxSystemExtTableGenNumberGroup 7 }


   wlsxSysExtVlanInterfaceTableGenNumber OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       deprecated 
        DESCRIPTION
			"
			This objects denotes the number of times the Vlan Interface table 
			was modified since reboot.
			"
        ::= { wlsxSystemExtTableGenNumberGroup 8 }

   wlsxSysExtLicenseTableGenNumber OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       deprecated
        DESCRIPTION
			"
			This objects denotes the number of times the license table
			was modified since reboot.
			"
        ::= { wlsxSystemExtTableGenNumberGroup 9 }

   wlsxSysExtMonAPTableGenNumber OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       deprecated 
        DESCRIPTION
			"
			This objects denotes the number of times the monitored AP table
			was modified since reboot.
			"
        ::= { wlsxSystemExtTableGenNumberGroup 10 }

   wlsxSysExtMonStationTableGenNumber OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       deprecated 
        DESCRIPTION
			"
			This objects denotes the number of times the monitored station table
			was modified since reboot.
			"
        ::= { wlsxSystemExtTableGenNumberGroup 11 }


   wlsxSysExtPoweredViaPoe OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
                        "Switch is powered using POE power."
        ::= { wlsxSystemExtGroup 33 }

   wlsxSysVMHostType OBJECT-TYPE
        SYNTAX       DisplayString (SIZE(1..64))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION           
                         "Host type is KVM/ HyperV/ VMware."
        ::= { wlsxSystemExtGroup 34 }

   wlsxSysExtProcessorModel OBJECT-TYPE
        SYNTAX       DisplayString (SIZE(1..64))
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION           
                         "Processor Model Name."
        ::= { wlsxSystemExtGroup 35 } 

   wlsxSysExtTotalCpu OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
                        "Total number of Control path and datapath CPUs
                         in the controller."

        ::= { wlsxSystemExtGroup 36 }

   wlsxSysExtTotalSocket  OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
                        "Total sockets present in the VM."

        ::= { wlsxSystemExtGroup 37 }

    wlsxAuthFailIp OBJECT-TYPE
        SYNTAX       IpAddress
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
                  "This variable contains the last SNMP
                   authorization failure IP address."
        ::= { wlsxSystemExtGroup 38 }
	
    wlsxSysExtDiskSize  OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
                  "Supervisor Card Flash Memory in MB."

        ::= { wlsxSystemExtGroup 39 }

-- New Switch List Table contains all the controllers in the domain. This table is 
-- valid only, when queried from the master controller.

   wlsxNSysExtSwitchListTable  OBJECT-TYPE 
      SYNTAX       SEQUENCE OF WlsxNSysExtSwitchListEntry 
      MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"This new Table will list all the controllers in the Aruba Domain.
		 It will be populated only on the master controller. Local controllers
		 return empty table. It is a common table for IPv4 and IPv6 Address of
		 the controller.
		"
	
      ::= { wlsxSystemExtGroup 40 } 

     wlsxNSysExtSwitchListEntry OBJECT-TYPE 
	  SYNTAX       WlsxNSysExtSwitchListEntry 
	  MAX-ACCESS   not-accessible		
          STATUS       current 
          DESCRIPTION 
             "New Switch List Entry"
	  INDEX { sysExtNSwitchIPAddressType, sysExtNSwitchIPAddress}
      ::= { wlsxNSysExtSwitchListTable 1 } 

     WlsxNSysExtSwitchListEntry ::=
     SEQUENCE {
 	 sysExtNSwitchIPAddressType     Integer32,
         sysExtNSwitchIPAddress		DisplayString(SIZE(0..45)),
         sysExtNSwitchRole 		ArubaSwitchRole,
	 sysExtNSwitchLocation		DisplayString,
	 sysExtNSwitchSWVersion		DisplayString,
	 sysExtNSwitchStatus		ArubaActiveState,
	 sysExtNSwitchName		DisplayString,
	 sysExtNSwitchSerNo      	DisplayString
     }

     sysExtNSwitchIPAddressType OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			Type of IP Address of the controller, either IPv4 / IPv6.
            "
        ::= { wlsxNSysExtSwitchListEntry 1 }

     sysExtNSwitchIPAddress OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..45))
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			IPv4 or IPv6 Address of the controller.
            "
        ::= { wlsxNSysExtSwitchListEntry 2 }

     sysExtNSwitchRole OBJECT-TYPE
         SYNTAX      ArubaSwitchRole
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 Role of the controller.
            "
        ::= { wlsxNSysExtSwitchListEntry 3 }

     sysExtNSwitchLocation OBJECT-TYPE
         SYNTAX      DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Location of the controller
            "
        ::= { wlsxNSysExtSwitchListEntry 4 }

     sysExtNSwitchSWVersion OBJECT-TYPE
         SYNTAX      DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Software version the controller is running.
            "
        ::= { wlsxNSysExtSwitchListEntry 5 }

     sysExtNSwitchStatus OBJECT-TYPE
         SYNTAX      ArubaActiveState
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Status of the controller.
            "
        ::= { wlsxNSysExtSwitchListEntry 6 }

     sysExtNSwitchName OBJECT-TYPE
         SYNTAX      DisplayString(SIZE(0..128))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Host name of the controller.
            "
        ::= { wlsxNSysExtSwitchListEntry 7 }

     sysExtNSwitchSerNo OBJECT-TYPE
         SYNTAX      DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Serial number of the controller.
            "
        ::= { wlsxNSysExtSwitchListEntry 8 }

END