--- ArubaOS 8.8.0.1_80393 -- vim:set ts=4 sw=4: WLSX-USER-MIB DEFINITIONS ::= BEGIN IMPORTS TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-IDENTITY, OBJECT-TYPE, snmpModules, Integer32, Unsigned32, Counter32, IpAddress, Counter64, NOTIFICATION-TYPE FROM SNMPv2-SMI TDomain, DisplayString, PhysAddress, TAddress, TimeInterval, RowStatus, StorageType, TestAndIncr, MacAddress, TruthValue FROM SNMPv2-TC OBJECT-GROUP FROM SNMPv2-CONF ArubaAuthenticationMethods, ArubaSubAuthenticationMethods, ArubaEncryptionType, ArubaPhyType, ArubaHTMode, ArubaUserForwardMode FROM ARUBA-TC wlsxEnterpriseMibModules FROM ARUBA-MIB wlanESSID FROM WLSX-WLAN-MIB; wlsxUserMIB MODULE-IDENTITY LAST-UPDATED "202008141745Z" ORGANIZATION "Aruba, a Hewlett Packard Enterprise company" CONTACT-INFO "Postal: 3333 Scott Blvd, Santa Clara, CA 95054 E-mail: aruba-ext-eng-reg@hpe.com Phone: 408 227 4500 Fax: 408 752 0626" DESCRIPTION "This MIB module defines MIB objects which provide information about the users in an Aruba controller." REVISION "202008141745Z" DESCRIPTION "The initial revision." ::= { wlsxEnterpriseMibModules 4 } wlsxUserAllInfoGroup OBJECT IDENTIFIER ::= { wlsxUserMIB 1 } -- wlsxUserAllInfoGroup contains information about the users in the controller. wlsxTotalNumOfUsers OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Total Number of the users. " ::= { wlsxUserAllInfoGroup 1 } wlsxUserTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This Table lists all the users (both wired and wireless) currently connected to the controller. Users are identified by their MAC address and IP address. " ::= { wlsxUserAllInfoGroup 2 } wlsxUserEntry OBJECT-TYPE SYNTAX WlsxUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "User Entry" INDEX { nUserPhyAddress, nUserIpAddress } ::= { wlsxUserTable 1 } WlsxUserEntry ::= SEQUENCE { nUserPhyAddress MacAddress, nUserIpAddress IpAddress, nUserName DisplayString, nUserRole DisplayString, nUserUpTime TimeTicks, nUserAuthenticationMethod ArubaAuthenticationMethods, nUserSubAuthenticationMethod ArubaSubAuthenticationMethods, nUserAuthServerName DisplayString, nUserExtVPNAddress IpAddress, nUserApLocation DisplayString, nUserApBSSID MacAddress, nUserIsOnHomeAgent TruthValue, nUserHomeAgentIpAddress IpAddress, nUserMobilityStatus INTEGER, nUserHomeVlan Integer32, nUserDefaultVlan Integer32, nUserAssignedVlan Integer32, nUserBWContractName DisplayString, nUserBWContractUsage INTEGER, nUserBWContractId Integer32, nUserIsProxyArpEnabled TruthValue, nUserCurrentVlan Integer32, nUserIsWired TruthValue, nUserConnectedSlot Integer32, nUserConnectedPort Integer32, nUserPhyType ArubaPhyType, nUserMobilityDomainName DisplayString, nUserUPBWContractName DisplayString, nUserUPBWContractUsage INTEGER, nUserUPBWContractId Integer32, nUserDNBWContractName DisplayString, nUserDNBWContractUsage INTEGER, nUserDNBWContractId Integer32, nUserHTMode ArubaHTMode, nUserForwardMode ArubaUserForwardMode, nUserEncryptionMethod ArubaEncryptionType, nUserDeviceID DisplayString, nUserConnectedModule Integer32, nUserDeviceType DisplayString, nUserRxDataPkts64 Counter64, nUserTxDataPkts64 Counter64, nUserRxDataOctets64 Counter64, nUserTxDataOctets64 Counter64, nVIAUserDeviceID MacAddress } nUserPhyAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " MAC address of the station from which the user connected to the controller. " ::= { wlsxUserEntry 1 } nUserIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION " IP Address of the user. " ::= { wlsxUserEntry 2 } nUserName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION " Name of the User. " ::= { wlsxUserEntry 3 } nUserRole OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION " The Role configured for this user. " ::= { wlsxUserEntry 4 } nUserUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " Time since the user connected to the controller. " ::= { wlsxUserEntry 5 } nUserAuthenticationMethod OBJECT-TYPE SYNTAX ArubaAuthenticationMethods MAX-ACCESS read-only STATUS current DESCRIPTION " Authentication mechanism used by the user to connect to the controller. " ::= { wlsxUserEntry 6 } nUserSubAuthenticationMethod OBJECT-TYPE SYNTAX ArubaSubAuthenticationMethods MAX-ACCESS read-only STATUS current DESCRIPTION " Sub Authentication Method " ::= { wlsxUserEntry 7 } nUserAuthServerName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION " Name of the authentication server used to authenticate the user. " ::= { wlsxUserEntry 8 } nUserExtVPNAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " External VPN IP Address, if this is a VPN user or 0.0.0.0 if not. " ::= { wlsxUserEntry 9 } nUserApLocation OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION " Location of the access point to which the user is associated. " ::= { wlsxUserEntry 10 } nUserApBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " BSSID of the access point, which the user used to connect to the controller. " ::= { wlsxUserEntry 11 } nUserIsOnHomeAgent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION " The Object will indicate if the controller is the home controller for the user or not. " ::= { wlsxUserEntry 12 } nUserHomeAgentIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION " The Home agent IP Address of the user. If this user is already on the home controller, then this IP is the controller IP else it is the home controller IP address. " ::= { wlsxUserEntry 13 } nUserMobilityStatus OBJECT-TYPE SYNTAX INTEGER { visitor(1), away(2), associated(3), wired(4), wireless(5) } MAX-ACCESS read-only STATUS current DESCRIPTION " The Mobility Status of the User. " ::= { wlsxUserEntry 14 } nUserHomeVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Home VLAN of the User. If the user is on the home controller then this VLAN will be same as userDefaultVlan. " ::= { wlsxUserEntry 15 } nUserDefaultVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Default VLAN of the User based on the AP configuration. " ::= { wlsxUserEntry 16 } nUserAssignedVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This Vlan will be different from the Default VLAN if the user has a derived VLAN Configuration. " ::= { wlsxUserEntry 17 } nUserBWContractName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Name of the Bandwidth Contract applied to this user. " ::= { wlsxUserEntry 18 } nUserBWContractUsage OBJECT-TYPE SYNTAX INTEGER { user(1), shared(2) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Indicates how the Bandwidth Contract is used. " ::= { wlsxUserEntry 19 } nUserBWContractId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION " Bandwidth Contract Id Assigned to the User " ::= { wlsxUserEntry 20 } nUserIsProxyArpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " This object will indicate if the controller is proxy ARPing for the user. " ::= { wlsxUserEntry 21 } nUserCurrentVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The VLAN to which the user is currently bound. " ::= { wlsxUserEntry 22 } nUserIsWired OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates whether this is a wired or wireless user. " ::= { wlsxUserEntry 23 } nUserConnectedSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The slot to which the user is connected, if wired. " ::= { wlsxUserEntry 24 } nUserConnectedPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The port to which the user is connected, if wired. " ::= { wlsxUserEntry 25 } nUserPhyType OBJECT-TYPE SYNTAX ArubaPhyType MAX-ACCESS read-only STATUS current DESCRIPTION " The wireless PHY type to which the user is associated, or 'wired'. " ::= { wlsxUserEntry 26 } nUserMobilityDomainName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION " The name of mobility domain mobile user belongs to. " ::= { wlsxUserEntry 27 } nUserUPBWContractName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION " Name of the Upstream Bandwidth Contract applied to this user. " ::= { wlsxUserEntry 28 } nUserUPBWContractUsage OBJECT-TYPE SYNTAX INTEGER { user(1), shared(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates how the Upstream Bandwidth Contract is used. " ::= { wlsxUserEntry 29 } nUserUPBWContractId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Upstream Bandwidth Contract Id Assigned to the User " ::= { wlsxUserEntry 30 } nUserDNBWContractName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION " Name of the Downstream Bandwidth Contract applied to this user. " ::= { wlsxUserEntry 31 } nUserDNBWContractUsage OBJECT-TYPE SYNTAX INTEGER { user(1), shared(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates how the Downstream Bandwidth Contract is used. " ::= { wlsxUserEntry 32 } nUserDNBWContractId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Downstream Bandwidth Contract Id Assigned to the User " ::= { wlsxUserEntry 33 } nUserHTMode OBJECT-TYPE SYNTAX ArubaHTMode MAX-ACCESS read-only STATUS current DESCRIPTION " The HT mode of this user, if any. " ::= { wlsxUserEntry 34 } nUserEncryptionMethod OBJECT-TYPE SYNTAX ArubaEncryptionType MAX-ACCESS read-only STATUS current DESCRIPTION " Encryption method. " ::= { wlsxUserEntry 35 } nUserForwardMode OBJECT-TYPE SYNTAX ArubaUserForwardMode MAX-ACCESS read-only STATUS current DESCRIPTION " User mode. " ::= { wlsxUserEntry 36 } nUserDeviceID OBJECT-TYPE SYNTAX DisplayString(SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION " Device ID " ::= { wlsxUserEntry 37 } nUserConnectedModule OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The module to which the user is connected, if wired. " ::= { wlsxUserEntry 38 } nUserDeviceType OBJECT-TYPE SYNTAX DisplayString(SIZE(0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION " Device type " ::= { wlsxUserEntry 39 } nUserRxDataPkts64 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " This object specifies number of packets received by this IP for which this user is connected to the controller. " ::= { wlsxUserEntry 40 } nUserTxDataPkts64 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " This object specifies number of packets transmitted by this IP for which this user is connected to the controller. " ::= { wlsxUserEntry 41 } nUserRxDataOctets64 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " This object specifies number of octets received by this IP for which this user is connected to the controller. " ::= { wlsxUserEntry 42 } nUserTxDataOctets64 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " This object specifies number of octets transmitted by this IP for which this user is connected to the controller. " ::= { wlsxUserEntry 43 } nVIAUserDeviceID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " MAC address of the station from which the user connected to the controller using VIA. " ::= { wlsxUserEntry 44 } wlsxUserSessionTimeTable OBJECT-TYPE SYNTAX SEQUENCE OF WlsxUserSessionTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table lists the user session time counts on an ESSID. ssid. The session times are separated into predefined time length buckets, with sessions lasting longer than 240 minutes falling into the 240min bucket. " ::= { wlsxUserAllInfoGroup 3 } wlsxUserSessionTimeEntry OBJECT-TYPE SYNTAX WlsxUserSessionTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " User session time data, divided into buckets of different time length. " INDEX { wlanESSID, wlsxUserSessionTimeLength} ::= { wlsxUserSessionTimeTable 1 } WlsxUserSessionTimeEntry ::= SEQUENCE { wlsxUserSessionTimeLength Integer32, wlsxUserSessionTimeCount Counter32 } wlsxUserSessionTimeLength OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " Pre-defined user session time length. " ::= { wlsxUserSessionTimeEntry 1 } wlsxUserSessionTimeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of users that are connected to the essid whose sessions expired in this time interval. " ::= { wlsxUserSessionTimeEntry 2 } -- wlsxUserStatsGroup -- This group lists the user count information based on the auth type wlsxUserStatsGroup OBJECT IDENTIFIER ::= { wlsxUserAllInfoGroup 4 } wlsxNumOfUsers8021x OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of 802.1x users. " ::= { wlsxUserStatsGroup 1 } wlsxNumOfUsersVPN OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of VPN users. " ::= { wlsxUserStatsGroup 2 } wlsxNumOfUsersCP OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of Captive Portal users. " ::= { wlsxUserStatsGroup 3 } wlsxNumOfUsersMAC OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of MAC users. " ::= { wlsxUserStatsGroup 4 } wlsxNumOfUsersStateful8021x OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of stateful 802.1x users. " ::= { wlsxUserStatsGroup 5 } END