--- ArubaOS 8.8.0.1_80393
-- vim:set ts=4 sw=4:
   WLSX-USER6-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       TEXTUAL-CONVENTION FROM SNMPv2-TC 

       MODULE-IDENTITY,
       OBJECT-TYPE,
       snmpModules,
       Integer32,
       Unsigned32,
	   Counter32,
	   IpAddress,
	   NOTIFICATION-TYPE
           FROM SNMPv2-SMI

       TDomain,
       DisplayString,
       PhysAddress,
       TAddress,
       TimeInterval,
       RowStatus,
       StorageType,
       TestAndIncr,
	   MacAddress,
	   TruthValue
           FROM SNMPv2-TC

       OBJECT-GROUP
           FROM SNMPv2-CONF

	   ArubaAuthenticationMethods,
	   ArubaSubAuthenticationMethods,
	   ArubaEncryptionType,
	   ArubaPhyType,
	   ArubaHTMode,
	   ArubaUserForwardMode
	   		FROM ARUBA-TC
		wlsxEnterpriseMibModules
			FROM ARUBA-MIB
		wlsxSwitchMIB
			FROM WLSX-SWITCH-MIB
		wlanESSID
			FROM WLSX-WLAN-MIB;

   wlsxUser6MIB MODULE-IDENTITY 
       LAST-UPDATED "202008141745Z"
       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
       CONTACT-INFO
            "Postal:    3333 Scott Blvd,
                        Santa Clara, CA 95054
            E-mail:     aruba-ext-eng-reg@hpe.com
            Phone:      408 227 4500
            Fax:        408 752 0626"
       DESCRIPTION
           "This MIB module defines MIB objects which provide
            information about the IPv6 users in an Aruba controller."
       REVISION        "202008141745Z"
       DESCRIPTION
           "The initial revision."
       ::= { wlsxEnterpriseMibModules 14 }

   wlsxUser6AllInfoGroup        OBJECT IDENTIFIER ::= { wlsxUser6MIB 1 }
   wlsxUser6InfoGroup         	OBJECT IDENTIFIER ::= { wlsxSwitchMIB 4 }

-- wlsxUser6AllInfoGroup contains information about the users in the controller.
 
  wlsxTotalNumOfUsers6 OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Number of the users.
            "
  ::= { wlsxUser6AllInfoGroup 1 }

  wlsxUser6Table  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF WlsxUser6Entry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This Table lists all the users (both wired and wireless) currently
			connected to the controller. Users are identified by their MAC 
			address and IP address.
		"
	
  ::= { wlsxUser6AllInfoGroup 2 } 

     wlsxUser6Entry OBJECT-TYPE 
	  SYNTAX       WlsxUser6Entry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "User Entry"
	  INDEX { nUser6PhyAddress, nUser6IpAddress }
      ::= { wlsxUser6Table 1 } 

     WlsxUser6Entry ::=
     SEQUENCE {
		nUser6PhyAddress 				MacAddress,
		nUser6IpAddress					DisplayString,
	 	nUser6Name						DisplayString,
	 	nUser6Role						DisplayString,
	 	nUser6UpTime					TimeTicks,
	 	nUser6AuthenticationMethod		ArubaAuthenticationMethods,
	 	nUser6SubAuthenticationMethod	ArubaSubAuthenticationMethods,
	 	nUser6AuthServerName			DisplayString,
	 	nUser6ExtVPNAddress				IpAddress,
	 	nUser6ApLocation				DisplayString,
	 	nUser6ApBSSID					MacAddress,
	 	nUser6IsOnHomeAgent				TruthValue,
	 	nUser6HomeAgentIpAddress		IpAddress,
	 	nUser6MobilityStatus			INTEGER,
	 	nUser6HomeVlan					Integer32,
	 	nUser6DefaultVlan				Integer32,
	 	nUser6AssignedVlan				Integer32,
	 	nUser6BWContractName			DisplayString,
	 	nUser6BWContractUsage			INTEGER,
	 	nUser6BWContractId				Integer32,
	 	nUser6IsProxyArpEnabled			TruthValue,
	 	nUser6CurrentVlan				Integer32,
		nUser6IsWired                   TruthValue,
		nUser6ConnectedSlot             Integer32,
		nUser6ConnectedPort             Integer32,
		nUser6PhyType   				ArubaPhyType,
		nUser6MobilityDomainName        DisplayString,
	 	nUser6UPBWContractName			DisplayString,
	 	nUser6UPBWContractUsage			INTEGER,
	 	nUser6UPBWContractId			Integer32,
	 	nUser6DNBWContractName			DisplayString,
	 	nUser6DNBWContractUsage			INTEGER,
	 	nUser6DNBWContractId			Integer32,
		nUser6HTMode   				    ArubaHTMode,
		nUser6DeviceID				DisplayString,
		nUser6DeviceType			DisplayString,
		nUser6ConnectedModule			Integer32,
		nUser6RxDataPkts64			Counter64,
		nUser6TxDataPkts64			Counter64,
		nUser6RxDataOctets64			Counter64,
		nUser6TxDataOctets64			Counter64,
		nUser6ForwardMode			ArubaUserForwardMode,
		nUser6EncryptionMethod			ArubaEncryptionType,
		nVIAUser6DeviceID 				MacAddress
     }

     nUser6PhyAddress OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
                MAC address of the station from which the user connected to
                the controller.
            "
        ::= { wlsxUser6Entry 1 }

     nUser6IpAddress OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..128))
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			IPv6 Address of the user.
            "
        ::= { wlsxUser6Entry 2 }

     nUser6Name OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..128))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 Name of the User.
            "
        ::= { wlsxUser6Entry 3 }

     nUser6Role OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Role configured for this user.
            "
        ::= { wlsxUser6Entry 4 }
		 
     nUser6UpTime OBJECT-TYPE
         SYNTAX       TimeTicks
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 Time since the user connected to the controller.	
            "
        ::= { wlsxUser6Entry 5 }

     nUser6AuthenticationMethod OBJECT-TYPE
         SYNTAX       ArubaAuthenticationMethods
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Authentication mechanism used by the user to connect to the 
			controller.
            "
        ::= { wlsxUser6Entry 6 }

     nUser6SubAuthenticationMethod OBJECT-TYPE
         SYNTAX       ArubaSubAuthenticationMethods
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Sub Authentication Method
            "
        ::= { wlsxUser6Entry 7 }

     nUser6AuthServerName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Name of the authentication server used to authenticate 
			the user.
            "
        ::= { wlsxUser6Entry 8 }

     nUser6ExtVPNAddress OBJECT-TYPE
         SYNTAX       IpAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			External VPN IP Address, if this is a VPN user or 0.0.0.0 if not.
            "
        ::= { wlsxUser6Entry 9 }

     nUser6ApLocation OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Location of the access point to 
			which the user is associated.
            "
        ::= { wlsxUser6Entry 10 }

     nUser6ApBSSID OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			BSSID of the access point, which 
			the user used to connect to the controller.
            "
        ::= { wlsxUser6Entry 11 }

     nUser6IsOnHomeAgent OBJECT-TYPE
         SYNTAX       TruthValue
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Object will indicate if the controller is the home controller 
			 for the user or not.
            "
        ::= { wlsxUser6Entry 12 }

     nUser6HomeAgentIpAddress OBJECT-TYPE
         SYNTAX       IpAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Home agent IP Address of the user. If this user is already on 
			the home controller, then this IP is the controller IP else it 
			is the home controller IP address.
			
            "
        ::= { wlsxUser6Entry 13 }

     nUser6MobilityStatus OBJECT-TYPE
         SYNTAX       INTEGER {
		 				visitor(1),
						away(2),
						associated(3),
						wired(4),
                        wireless(5)
		 				}
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Mobility Status of the User.
			
            "
        ::= { wlsxUser6Entry 14 }

     nUser6HomeVlan OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Home VLAN of the User. If the user is on the home controller 
			 then this VLAN will be same as userDefaultVlan.
            "
        ::= { wlsxUser6Entry 15 }

     nUser6DefaultVlan OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Default VLAN of the User based on the AP configuration.
            "
        ::= { wlsxUser6Entry 16 }

     nUser6AssignedVlan OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This Vlan will be different from the Default VLAN if the user has 
			a derived VLAN Configuration.
            "
        ::= { wlsxUser6Entry 17 }

     nUser6BWContractName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			Name of the Bandwidth Contract applied to this user.
            "
        ::= { wlsxUser6Entry 18 }

     nUser6BWContractUsage OBJECT-TYPE
         SYNTAX       INTEGER {
							user(1),
							shared(2)
					  }
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			Indicates how the Bandwidth Contract is used.
            "
        ::= { wlsxUser6Entry 19 }

     nUser6BWContractId OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			Bandwidth Contract Id Assigned to the User
            "
        ::= { wlsxUser6Entry 20 }

     nUser6IsProxyArpEnabled OBJECT-TYPE
         SYNTAX       TruthValue
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			This object will indicate if the controller is proxy ARPing for the
			user.
            "
        ::= { wlsxUser6Entry 21 }

     nUser6CurrentVlan OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The VLAN to which the user is currently bound.
            "
        ::= { wlsxUser6Entry 22 }

     nUser6IsWired OBJECT-TYPE
         SYNTAX       TruthValue
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates whether this is a wired or wireless user.
            "
        ::= { wlsxUser6Entry 23 }

     nUser6ConnectedSlot OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The slot to which the user is connected, if wired.
            "
        ::= { wlsxUser6Entry 24 }

     nUser6ConnectedPort OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The port to which the user is connected, if wired.
            "
        ::= { wlsxUser6Entry 25 }

     nUser6PhyType OBJECT-TYPE
         SYNTAX       ArubaPhyType
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The wireless PHY type to which the user is associated, or 'wired'.
            "
        ::= { wlsxUser6Entry 26 }

     nUser6MobilityDomainName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The name of mobility domain mobile user belongs to.
            "
        ::= { wlsxUser6Entry 27 }

     nUser6UPBWContractName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Name of the Upstream Bandwidth Contract applied to this user.
            "
        ::= { wlsxUser6Entry 28 }

     nUser6UPBWContractUsage OBJECT-TYPE
         SYNTAX       INTEGER {
							user(1),
							shared(2)
					  }
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates how the Upstream Bandwidth Contract is used.
            "
        ::= { wlsxUser6Entry 29 }

     nUser6UPBWContractId OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Upstream Bandwidth Contract Id Assigned to the User
            "
        ::= { wlsxUser6Entry 30 }

     nUser6DNBWContractName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Name of the Downstream Bandwidth Contract applied to this user.
            "
        ::= { wlsxUser6Entry 31 }

     nUser6DNBWContractUsage OBJECT-TYPE
         SYNTAX       INTEGER {
							user(1),
							shared(2)
					  }
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates how the Downstream Bandwidth Contract is used.
            "
        ::= { wlsxUser6Entry 32 }

     nUser6DNBWContractId OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Downstream Bandwidth Contract Id Assigned to the User
            "
        ::= { wlsxUser6Entry 33 }

     nUser6HTMode OBJECT-TYPE
         SYNTAX       ArubaHTMode
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The HT mode of this user, if any.
            "
        ::= { wlsxUser6Entry 34 }

     nUser6DeviceID OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..128))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Device ID
            "
        ::= { wlsxUser6Entry 35 }

     nUser6DeviceType OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..31))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Device Type
            "
        ::= { wlsxUser6Entry 36 }

     nUser6ConnectedModule OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
            The module to which the user is connected, if wired.
            "
        ::= { wlsxUser6Entry 37 }

     nUser6RxDataPkts64 OBJECT-TYPE
         SYNTAX       Counter64
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
            This object specifies number of packets received by this IP
            for which this user is connected to the controller.
            "
         ::= { wlsxUser6Entry 38 }

     nUser6TxDataPkts64 OBJECT-TYPE
         SYNTAX       Counter64
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
            This object specifies number of packets transmitted by this IP
            for which this user is connected to the controller.
            "
         ::= { wlsxUser6Entry 39 }

     nUser6RxDataOctets64 OBJECT-TYPE
         SYNTAX       Counter64
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
            This object specifies number of octets received by this IP
            for which this user is connected to the controller.
            "
         ::= { wlsxUser6Entry 40 }

     nUser6TxDataOctets64 OBJECT-TYPE
         SYNTAX       Counter64
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
            This object specifies number of octets transmitted by this IP
            for which this user is connected to the controller.
            "
        ::= { wlsxUser6Entry 41 }

     nUser6ForwardMode OBJECT-TYPE
         SYNTAX       ArubaUserForwardMode
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Forward mode.
            "
        ::= { wlsxUser6Entry 42 }

     nUser6EncryptionMethod OBJECT-TYPE
         SYNTAX       ArubaEncryptionType
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Encryption method.
            "
        ::= { wlsxUser6Entry 43 }

     nVIAUser6DeviceID OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
                MAC address of the station from which the user connected to
                the controller using VIA.
            "
        ::= { wlsxUser6Entry 44 }

  wlsxUser6SessionTimeTable OBJECT-TYPE
	  SYNTAX		SEQUENCE OF WlsxUser6SessionTimeEntry
	  MAX-ACCESS	not-accessible
	  STATUS		current
	  DESCRIPTION
	  "
		This table lists the user session time counts on an ESSID.
		ssid. The session times  are separated into predefined time length 
		buckets, with sessions lasting longer than 240 minutes falling into 
		the 240min bucket. 
	  "
  ::= { wlsxUser6AllInfoGroup 3 }

    wlsxUser6SessionTimeEntry OBJECT-TYPE 
	  SYNTAX       WlsxUser6SessionTimeEntry
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
        "
		 User session time data, divided into buckets of different
	     time length.         "
			
	  INDEX { wlanESSID, wlsxUser6SessionTimeLength}
	  ::= { wlsxUser6SessionTimeTable 1 }
 
	  WlsxUser6SessionTimeEntry ::=
      SEQUENCE {
		 wlsxUser6SessionTimeLength   Integer32,
		 wlsxUser6SessionTimeCount	 Counter32
	  }

     wlsxUser6SessionTimeLength OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			 Pre-defined user session time length.
            "
        ::= { wlsxUser6SessionTimeEntry 1 }

     wlsxUser6SessionTimeCount OBJECT-TYPE
         SYNTAX       Counter32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Number of users that are connected to the essid whose sessions expired in this time interval.
            "
        ::= { wlsxUser6SessionTimeEntry 2 }

   wlsxSwitchUser6Table  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF MxSwitchUser6Entry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This Table lists all the users (both wired and wireless) currently
			connected to the switch. Users are identified by their IP address.
		"
	
      ::= { wlsxUser6InfoGroup 1 } 

     wlsxSwitchUser6Entry OBJECT-TYPE 
	  SYNTAX       MxSwitchUser6Entry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             "User Entry"
	  INDEX { user6IpAddress}
      ::= { wlsxSwitchUser6Table 1 } 

     MxSwitchUser6Entry ::=
     SEQUENCE {
         user6IpAddress				DisplayString,
         user6PhyAddress 			MacAddress,
		 user6Name					DisplayString,
		 user6Role					DisplayString,
		 user6UpTime				TimeTicks,
		 user6AuthenticationMethod	INTEGER,
		 user6Location				DisplayString,
		 user6ServerName			DisplayString,
		 user6ConnectedVlan			Integer32,
		 user6ConnectedSlot			Integer32,
		 user6ConnectedPort			Integer32,
		 user6BWContractName		DisplayString,
		 user6BWContractUsage		INTEGER,
		 user6ConnectedModule		Integer32

     }

     user6IpAddress OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   not-accessible
         STATUS       current
         DESCRIPTION
            "
			IPv6 Address from which the user connected to the switch.
            "
        ::= { wlsxSwitchUser6Entry 1 }

     user6PhyAddress OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Physical Address of the station from which the user connected to 
			the switch.
            "
        ::= { wlsxSwitchUser6Entry 2 }

     user6Name OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 Name of the User.
            "
        ::= { wlsxSwitchUser6Entry 3 }

     user6Role OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..64))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			The Role configured for this user.
            "
        ::= { wlsxSwitchUser6Entry 4 }

		 
     user6UpTime OBJECT-TYPE
         SYNTAX       TimeTicks
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			 Time since the user is connected to the switch.	
            "
        ::= { wlsxSwitchUser6Entry 5 }

     user6AuthenticationMethod OBJECT-TYPE
         SYNTAX       INTEGER {
						none(1),
						other(2),
						web(3),
						dot1x(4),
						vpn(5),
						mac(6)
						}
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Authentication mechanism used by the user to connect to the switch.
            "
        ::= { wlsxSwitchUser6Entry 6 }

     user6Location OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Location of the access point (in Building.Floor.... format), which
			the user used to connect to the switch.
            "
        ::= { wlsxSwitchUser6Entry 7 }

     user6ServerName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Name of the Back-end authentication server, used to authenticate
			the user.
            "
        ::= { wlsxSwitchUser6Entry 8 }

     user6ConnectedVlan OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Vlan on which the user is connected to the switch.
            "
        ::= { wlsxSwitchUser6Entry 9 }

     user6ConnectedSlot OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Slot on switch, where the user connection terminates.
            "
        ::= { wlsxSwitchUser6Entry 10 }

     user6ConnectedPort OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Port on switch, where the user connection terminates.
            "
        ::= { wlsxSwitchUser6Entry 11 }

     user6BWContractName OBJECT-TYPE
         SYNTAX       DisplayString(SIZE(0..32))
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Name of the Bandwidth Contract applied to this user.
            "
        ::= { wlsxSwitchUser6Entry 12 }

     user6BWContractUsage OBJECT-TYPE
         SYNTAX       INTEGER {
							user(1),
							shared(2)
					  }
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Indicates how the Bandwidth Contract is used.
            "
        ::= { wlsxSwitchUser6Entry 13 }

     user6ConnectedModule OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Module on switch, where the user connection terminates.
            "
        ::= { wlsxSwitchUser6Entry 14 }


END